diff options
826 files changed, 41682 insertions, 11478 deletions
@@ -3554,12 +3554,12 @@ E: cvance@nai.com D: portions of the Linux Security Module (LSM) framework and security modules N: Petr Vandrovec -E: vandrove@vc.cvut.cz +E: petr@vandrovec.name D: Small contributions to ncpfs D: Matrox framebuffer driver -S: Chudenicka 8 -S: 10200 Prague 10, Hostivar -S: Czech Republic +S: 21513 Conradia Ct +S: Cupertino, CA 95014 +S: USA N: Thibaut Varene E: T-Bone@parisc-linux.org diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 7f5fc3ba9c91..ecf7d04bca26 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -6,6 +6,8 @@ Interrupts - ARM Interrupt subsystem documentation IXP2000 - Release Notes for Linux on Intel's IXP2000 Network Processor +msm + - MSM specific documentation Netwinder - Netwinder specific documentation Porting diff --git a/Documentation/arm/msm/gpiomux.txt b/Documentation/arm/msm/gpiomux.txt new file mode 100644 index 000000000000..67a81620adf6 --- /dev/null +++ b/Documentation/arm/msm/gpiomux.txt @@ -0,0 +1,176 @@ +This document provides an overview of the msm_gpiomux interface, which +is used to provide gpio pin multiplexing and configuration on mach-msm +targets. + +History +======= + +The first-generation API for gpio configuration & multiplexing on msm +is the function gpio_tlmm_config(). This function has a few notable +shortcomings, which led to its deprecation and replacement by gpiomux: + +The 'disable' parameter: Setting the second parameter to +gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral +processor in charge of the subsystem to perform a look-up into a +low-power table and apply the low-power/sleep setting for the pin. +As the msm family evolved this became problematic. Not all pins +have sleep settings, not all peripheral processors will accept requests +to apply said sleep settings, and not all msm targets have their gpio +subsystems managed by a peripheral processor. In order to get consistent +behavior on all targets, drivers are forced to ignore this parameter, +rendering it useless. + +The 'direction' flag: for all mux-settings other than raw-gpio (0), +the output-enable bit of a gpio is hard-wired to a known +input (usually VDD or ground). For those settings, the direction flag +is meaningless at best, and deceptive at worst. In addition, using the +direction flag to change output-enable (OE) directly can cause trouble in +gpiolib, which has no visibility into gpio direction changes made +in this way. Direction control in gpio mode should be made through gpiolib. + +Key Features of gpiomux +======================= + +- A consistent interface across all generations of msm. Drivers can expect +the same results on every target. +- gpiomux plays nicely with gpiolib. Functions that should belong to gpiolib +are left to gpiolib and not duplicated here. gpiomux is written with the +intent that gpio_chips will call gpiomux reference-counting methods +from their request() and free() hooks, providing full integration. +- Tabular configuration. Instead of having to call gpio_tlmm_config +hundreds of times, gpio configuration is placed in a single table. +- Per-gpio sleep. Each gpio is individually reference counted, allowing only +those lines which are in use to be put in high-power states. +- 0 means 'do nothing': all flags are designed so that the default memset-zero +equates to a sensible default of 'no configuration', preventing users +from having to provide hundreds of 'no-op' configs for unused or +unwanted lines. + +Usage +===== + +To use gpiomux, provide configuration information for relevant gpio lines +in the msm_gpiomux_configs table. Since a 0 equates to "unconfigured", +only those lines to be managed by gpiomux need to be specified. Here +is a completely fictional example: + +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { + [12] = { + .active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1, + .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, + }, + [34] = { + .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, + }, +}; + +To indicate that a gpio is in use, call msm_gpiomux_get() to increase +its reference count. To decrease the reference count, call msm_gpiomux_put(). + +The effect of this configuration is as follows: + +When the system boots, gpios 12 and 34 will be initialized with their +'suspended' configurations. All other gpios, which were left unconfigured, +will not be touched. + +When msm_gpiomux_get() is called on gpio 12 to raise its reference count +above 0, its active configuration will be applied. Since no other gpio +line has a valid active configuration, msm_gpiomux_get() will have no +effect on any other line. + +When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference +count to 0, their suspended configurations will be applied. +Since no other gpio line has a valid suspended configuration, no other +gpio line will be effected by msm_gpiomux_put(). Since gpio 34 has no valid +active configuration, this is effectively a no-op for gpio 34 as well, +with one small caveat, see the section "About Output-Enable Settings". + +All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but +they address some important issues. As unused entries (all those +except 12 and 34) are zero-filled, gpiomux needs a way to distinguish +the used fields from the unused. In addition, the all-zero pattern +is a valid configuration! Therefore, gpiomux defines an additional bit +which is used to indicate when a field is used. This has the pleasant +side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate +that a value should not be changed: + + msm_gpiomux_write(0, GPIOMUX_VALID, 0); + +replaces the active configuration of gpio 0 with an all-zero configuration, +but leaves the suspended configuration as it was. + +Static Configurations +===================== + +To install a static configuration, which is applied at boot and does +not change after that, install a configuration with a suspended component +but no active component, as in the previous example: + + [34] = { + .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, + }, + +The suspended setting is applied during boot, and the lack of any valid +active setting prevents any other setting from being applied at runtime. +If other subsystems attempting to access the line is a concern, one could +*really* anchor the configuration down by calling msm_gpiomux_get on the +line at initialization to move the line into active mode. With the line +held, it will never be re-suspended, and with no valid active configuration, +no new configurations will be applied. + +But then, if having other subsystems grabbing for the line is truly a concern, +it should be reserved with gpio_request instead, which carries an implicit +msm_gpiomux_get. + +gpiomux and gpiolib +=================== + +It is expected that msm gpio_chips will call msm_gpiomux_get() and +msm_gpiomux_put() from their request and free hooks, like this fictional +example: + +static int request(struct gpio_chip *chip, unsigned offset) +{ + return msm_gpiomux_get(chip->base + offset); +} + +static void free(struct gpio_chip *chip, unsigned offset) +{ + msm_gpiomux_put(chip->base + offset); +} + + ...somewhere in a gpio_chip declaration... + .request = request, + .free = free, + +This provides important functionality: +- It guarantees that a gpio line will have its 'active' config applied + when the line is requested, and will not be suspended while the line + remains requested; and +- It guarantees that gpio-direction settings from gpiolib behave sensibly. + See "About Output-Enable Settings." + +This mechanism allows for "auto-request" of gpiomux lines via gpiolib +when it is suitable. Drivers wishing more exact control are, of course, +free to also use msm_gpiomux_set and msm_gpiomux_get. + +About Output-Enable Settings +============================ + +Some msm targets do not have the ability to query the current gpio +configuration setting. This means that changes made to the output-enable +(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux. +Therefore, when gpiomux applies a configuration setting, any direction +settings which may have been applied by gpiolib are lost and the default +input settings are re-applied. + +For this reason, drivers should not assume that gpio direction settings +continue to hold if they free and then re-request a gpio. This seems like +common sense - after all, anybody could have obtained the line in the +meantime - but it needs saying. + +This also means that calls to msm_gpiomux_write will reset the OE bit, +which means that if the gpio line is held by a client of gpiolib and +msm_gpiomux_write is called, the direction setting has been lost and +gpiolib's internal state has been broken. +Release gpio lines before reconfiguring them. diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt index 2df71861e578..d9271e74e488 100644 --- a/Documentation/networking/e1000.txt +++ b/Documentation/networking/e1000.txt @@ -1,82 +1,35 @@ Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters =============================================================== -September 26, 2006 - +Intel Gigabit Linux driver. +Copyright(c) 1999 - 2010 Intel Corporation. Contents ======== -- In This Release - Identifying Your Adapter -- Building and Installation - Command Line Parameters - Speed and Duplex Configuration - Additional Configurations -- Known Issues - Support - -In This Release -=============== - -This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family -of Adapters. This driver includes support for Itanium(R)2-based systems. - -For questions related to hardware requirements, refer to the documentation -supplied with your Intel PRO/1000 adapter. All hardware requirements listed -apply to use with Linux. - -The following features are now available in supported kernels: - - Native VLANs - - Channel Bonding (teaming) - - SNMP - -Channel Bonding documentation can be found in the Linux kernel source: -/Documentation/networking/bonding.txt - -The driver information previously displayed in the /proc filesystem is not -supported in this release. Alternatively, you can use ethtool (version 1.6 -or later), lspci, and ifconfig to obtain the same information. - -Instructions on updating ethtool can be found in the section "Additional -Configurations" later in this document. - -NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100 -support. - - Identifying Your Adapter ======================== For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: - http://support.intel.com/support/network/adapter/pro100/21397.htm + http://support.intel.com/support/go/network/adapter/idguide.htm For the latest Intel network drivers for Linux, refer to the following website. In the search field, enter your adapter name or type, or use the networking link on the left to search for your adapter: - http://downloadfinder.intel.com/scripts-df/support_intel.asp - + http://support.intel.com/support/go/network/adapter/home.htm Command Line Parameters ======================= -If the driver is built as a module, the following optional parameters -are used by entering them on the command line with the modprobe command -using this syntax: - - modprobe e1000 [<option>=<VAL1>,<VAL2>,...] - -For example, with two PRO/1000 PCI adapters, entering: - - modprobe e1000 TxDescriptors=80,128 - -loads the e1000 driver with 80 TX descriptors for the first adapter and -128 TX descriptors for the second adapter. - The default value for each parameter is generally the recommended setting, unless otherwise noted. @@ -89,10 +42,6 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed parameters, see the application note at: http://www.intel.com/design/network/applnots/ap450.htm - A descriptor describes a data buffer and attributes related to - the data buffer. This information is accessed by the hardware. - - AutoNeg ------- (Supported only on adapters with copper connections) @@ -106,7 +55,6 @@ Duplex parameters must not be specified. NOTE: Refer to the Speed and Duplex section of this readme for more information on the AutoNeg parameter. - Duplex ------ (Supported only on adapters with copper connections) @@ -119,7 +67,6 @@ set to auto-negotiate, the board auto-detects the correct duplex. If the link partner is forced (either full or half), Duplex defaults to half- duplex. - FlowControl ----------- Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) @@ -128,16 +75,16 @@ Default Value: Reads flow control settings from the EEPROM This parameter controls the automatic generation(Tx) and response(Rx) to Ethernet PAUSE frames. - InterruptThrottleRate --------------------- (not supported on Intel(R) 82542, 82543 or 82544-based adapters) -Valid Range: 0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative) +Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, + 4=simplified balancing) Default Value: 3 The driver can limit the amount of interrupts per second that the adapter -will generate for incoming packets. It does this by writing a value to the -adapter that is based on the maximum amount of interrupts that the adapter +will generate for incoming packets. It does this by writing a value to the +adapter that is based on the maximum amount of interrupts that the adapter will generate per second. Setting InterruptThrottleRate to a value greater or equal to 100 @@ -146,37 +93,43 @@ per second, even if more packets have come in. This reduces interrupt load on the system and can lower CPU utilization under heavy load, but will increase latency as packets are not processed as quickly. -The default behaviour of the driver previously assumed a static -InterruptThrottleRate value of 8000, providing a good fallback value for -all traffic types,but lacking in small packet performance and latency. -The hardware can handle many more small packets per second however, and +The default behaviour of the driver previously assumed a static +InterruptThrottleRate value of 8000, providing a good fallback value for +all traffic types,but lacking in small packet performance and latency. +The hardware can handle many more small packets per second however, and for this reason an adaptive interrupt moderation algorithm was implemented. Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which -it dynamically adjusts the InterruptThrottleRate value based on the traffic +it dynamically adjusts the InterruptThrottleRate value based on the traffic that it receives. After determining the type of incoming traffic in the last -timeframe, it will adjust the InterruptThrottleRate to an appropriate value +timeframe, it will adjust the InterruptThrottleRate to an appropriate value for that traffic. The algorithm classifies the incoming traffic every interval into -classes. Once the class is determined, the InterruptThrottleRate value is -adjusted to suit that traffic type the best. There are three classes defined: +classes. Once the class is determined, the InterruptThrottleRate value is +adjusted to suit that traffic type the best. There are three classes defined: "Bulk traffic", for large amounts of packets of normal size; "Low latency", for small amounts of traffic and/or a significant percentage of small -packets; and "Lowest latency", for almost completely small packets or +packets; and "Lowest latency", for almost completely small packets or minimal traffic. -In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 -for traffic that falls in class "Bulk traffic". If traffic falls in the "Low -latency" or "Lowest latency" class, the InterruptThrottleRate is increased +In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 +for traffic that falls in class "Bulk traffic". If traffic falls in the "Low +latency" or "Lowest latency" class, the InterruptThrottleRate is increased stepwise to 20000. This default mode is suitable for most applications. For situations where low latency is vital such as cluster or grid computing, the algorithm can reduce latency even more when InterruptThrottleRate is set to mode 1. In this mode, which operates -the same as mode 3, the InterruptThrottleRate will be increased stepwise to +the same as mode 3, the InterruptThrottleRate will be increased stepwise to 70000 for traffic in class "Lowest latency". +In simplified mode the interrupt rate is based on the ratio of Tx and +Rx traffic. If the bytes per second rate is approximately equal, the +interrupt rate will drop as low as 2000 interrupts per second. If the +traffic is mostly transmit or mostly receive, the interrupt rate could +be as high as 8000. + Setting InterruptThrottleRate to 0 turns off any interrupt moderation and may improve small packet latency, but is generally not suitable for bulk throughput traffic. @@ -212,8 +165,6 @@ NOTE: When e1000 is loaded with default settings and multiple adapters be platform-specific. If CPU utilization is not a concern, use RX_POLLING (NAPI) and default driver settings. - - RxDescriptors ------------- Valid Range: 80-256 for 82542 and 82543-based adapters @@ -225,15 +176,14 @@ by the driver. Increasing this value allows the driver to buffer more incoming packets, at the expense of increased system memory utilization. Each descriptor is 16 bytes. A receive buffer is also allocated for each -descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending +descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending on the MTU setting. The maximum MTU size is 16110. -NOTE: MTU designates the frame size. It only needs to be set for Jumbo - Frames. Depending on the available system resources, the request - for a higher number of receive descriptors may be denied. In this +NOTE: MTU designates the frame size. It only needs to be set for Jumbo + Frames. Depending on the available system resources, the request + for a higher number of receive descriptors may be denied. In this case, use a lower number. - RxIntDelay ---------- Valid Range: 0-65535 (0=off) @@ -254,7 +204,6 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may restoring the network connection. To eliminate the potential for the hang ensure that RxIntDelay is set to 0. - RxAbsIntDelay ------------- (This parameter is supported only on 82540, 82545 and later adapters.) @@ -268,7 +217,6 @@ packet is received within the set amount of time. Proper tuning, along with RxIntDelay, may improve traffic throughput in specific network conditions. - Speed ----- (This parameter is supported only on adapters with copper connections.) @@ -280,7 +228,6 @@ Speed forces the line speed to the specified value in megabits per second partner is set to auto-negotiate, the board will auto-detect the correct speed. Duplex should also be set when Speed is set to either 10 or 100. - TxDescriptors ------------- Valid Range: 80-256 for 82542 and 82543-based adapters @@ -295,6 +242,36 @@ NOTE: Depending on the available system resources, the request for a higher number of transmit descriptors may be denied. In this case, use a lower number. +TxDescriptorStep +---------------- +Valid Range: 1 (use every Tx Descriptor) + 4 (use every 4th Tx Descriptor) + +Default Value: 1 (use every Tx Descriptor) + +On certain non-Intel architectures, it has been observed that intense TX +traffic bursts of short packets may result in an improper descriptor +writeback. If this occurs, the driver will report a "TX Timeout" and reset +the adapter, after which the transmit flow will restart, though data may +have stalled for as much as 10 seconds before it resumes. + +The improper writeback does not occur on the first descriptor in a system +memory cache-line, which is typically 32 bytes, or 4 descriptors long. + +Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors +are aligned to the start of a system memory cache line, and so this problem +will not occur. + +NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of + TxDescriptors available for transmits to 1/4 of the normal allocation. + This has a possible negative performance impact, which may be + compensated for by allocating more descriptors using the TxDescriptors + module parameter. + + There are other conditions which may result in "TX Timeout", which will + not be resolved by the use of the TxDescriptorStep parameter. As the + issue addressed by this parameter has never been observed on Intel + Architecture platforms, it should not be used on Intel platforms. TxIntDelay ---------- @@ -307,7 +284,6 @@ efficiency if properly tuned for specific network traffic. If the system is reporting dropped transmits, this value may be set too high causing the driver to run out of available transmit descriptors. - TxAbsIntDelay ------------- (This parameter is supported only on 82540, 82545 and later adapters.) @@ -330,6 +306,35 @@ Default Value: 1 A value of '1' indicates that the driver should enable IP checksum offload for received packets (both UDP and TCP) to the adapter hardware. +Copybreak +--------- +Valid Range: 0-xxxxxxx (0=off) +Default Value: 256 +Usage: insmod e1000.ko copybreak=128 + +Driver copies all packets below or equaling this size to a fresh Rx +buffer before handing it up the stack. + +This parameter is different than other parameters, in that it is a +single (not 1,1,1 etc.) parameter applied to all driver instances and +it is also available during runtime at +/sys/module/e1000/parameters/copybreak + +SmartPowerDownEnable +-------------------- +Valid Range: 0-1 +Default Value: 0 (disabled) + +Allows PHY to turn off in lower power states. The user can turn off +this parameter in supported chipsets. + +KumeranLockLoss +--------------- +Valid Range: 0-1 +Default Value: 1 (enabled) + +This workaround skips resetting the PHY at shutdown for the initial +silicon releases of ICH8 systems. Speed and Duplex Configuration ============================== @@ -385,40 +390,9 @@ If the link partner is forced to a specific speed and duplex, then this parameter should not be used. Instead, use the Speed and Duplex parameters previously mentioned to force the adapter to the same speed and duplex. - Additional Configurations ========================= - Configuring the Driver on Different Distributions - ------------------------------------------------- - Configuring a network driver to load properly when the system is started - is distribution dependent. Typically, the configuration process involves - adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well - as editing other system startup scripts and/or configuration files. Many - popular Linux distributions ship with tools to make these changes for you. - To learn the proper way to configure a network device for your system, - refer to your distribution documentation. If during this process you are - asked for the driver or module name, the name for the Linux Base Driver - for the Intel(R) PRO/1000 Family of Adapters is e1000. - - As an example, if you install the e1000 driver for two PRO/1000 adapters - (eth0 and eth1) and set the speed and duplex to 10full and 100half, add - the following to modules.conf or or modprobe.conf: - - alias eth0 e1000 - alias eth1 e1000 - options e1000 Speed=10,100 Duplex=2,1 - - Viewing Link Messages - --------------------- - Link messages will not be displayed to the console if the distribution is - restricting system messages. In order to see network driver link messages - on your console, set dmesg to eight by entering the following: - - dmesg -n 8 - - NOTE: This setting is not saved across reboots. - Jumbo Frames ------------ Jumbo Frames support is enabled by changing the MTU to a value larger than @@ -437,9 +411,11 @@ Additional Configurations setting in a different location. Notes: - - - To enable Jumbo Frames, increase the MTU size on the interface beyond - 1500. + Degradation in throughput performance may be observed in some Jumbo frames + environments. If this is observed, increasing the application's socket buffer + size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help. + See the specific application manual and /usr/src/linux*/Documentation/ + networking/ip-sysctl.txt for more details. - The maximum MTU setting for Jumbo Frames is 16110. This value coincides with the maximum Jumbo Frames size of 16128. @@ -447,40 +423,11 @@ Additional Configurations - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or loss of link. - - Some Intel gigabit adapters that support Jumbo Frames have a frame size - limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes. - The adapters with this limitation are based on the Intel(R) 82571EB, - 82572EI, 82573L and 80003ES2LAN controller. These correspond to the - following product names: - Intel(R) PRO/1000 PT Server Adapter - Intel(R) PRO/1000 PT Desktop Adapter - Intel(R) PRO/1000 PT Network Connection - Intel(R) PRO/1000 PT Dual Port Server Adapter - Intel(R) PRO/1000 PT Dual Port Network Connection - Intel(R) PRO/1000 PF Server Adapter - Intel(R) PRO/1000 PF Network Connection - Intel(R) PRO/1000 PF Dual Port Server Adapter - Intel(R) PRO/1000 PB Server Connection - Intel(R) PRO/1000 PL Network Connection - Intel(R) PRO/1000 EB Network Connection with I/O Acceleration - Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration - Intel(R) PRO/1000 PT Quad Port Server Adapter - - Adapters based on the Intel(R) 82542 and 82573V/E controller do not support Jumbo Frames. These correspond to the following product names: Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network Connection - - The following adapters do not support Jumbo Frames: - Intel(R) 82562V 10/100 Network Connection - Intel(R) 82566DM Gigabit Network Connection - Intel(R) 82566DC Gigabit Network Connection - Intel(R) 82566MM Gigabit Network Connection - Intel(R) 82566MC Gigabit Network Connection - Intel(R) 82562GT 10/100 Network Connection - Intel(R) 82562G 10/100 Network Connection - - Ethtool ------- The driver utilizes the ethtool interface for driver configuration and @@ -490,142 +437,14 @@ Additional Configurations The latest release of ethtool can be found from http://sourceforge.net/projects/gkernel. - NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support - for a more complete ethtool feature set can be enabled by upgrading - ethtool to ethtool-1.8.1. - Enabling Wake on LAN* (WoL) --------------------------- - WoL is configured through the Ethtool* utility. Ethtool is included with - all versions of Red Hat after Red Hat 7.2. For other Linux distributions, - download and install Ethtool from the following website: - http://sourceforge.net/projects/gkernel. - - For instructions on enabling WoL with Ethtool, refer to the website listed - above. + WoL is configured through the Ethtool* utility. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the e1000 driver must be loaded when shutting down or rebooting the system. - Wake On LAN is only supported on port A for the following devices: - Intel(R) PRO/1000 PT Dual Port Network Connection - Intel(R) PRO/1000 PT Dual Port Server Connection - Intel(R) PRO/1000 PT Dual Port Server Adapter - Intel(R) PRO/1000 PF Dual Port Server Adapter - Intel(R) PRO/1000 PT Quad Port Server Adapter - - NAPI - ---- - NAPI (Rx polling mode) is enabled in the e1000 driver. - - See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI. - - -Known Issues -============ - -Dropped Receive Packets on Half-duplex 10/100 Networks ------------------------------------------------------- -If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half- -duplex, you may observe occasional dropped receive packets. There are no -workarounds for this problem in this network configuration. The network must -be updated to operate in full-duplex, and/or 1000mbps only. - -Jumbo Frames System Requirement -------------------------------- -Memory allocation failures have been observed on Linux systems with 64 MB -of RAM or less that are running Jumbo Frames. If you are using Jumbo -Frames, your system may require more than the advertised minimum -requirement of 64 MB of system memory. - -Performance Degradation with Jumbo Frames ------------------------------------------ -Degradation in throughput performance may be observed in some Jumbo frames -environments. If this is observed, increasing the application's socket -buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values -may help. See the specific application manual and -/usr/src/linux*/Documentation/ -networking/ip-sysctl.txt for more details. - -Jumbo Frames on Foundry BigIron 8000 switch -------------------------------------------- -There is a known issue using Jumbo frames when connected to a Foundry -BigIron 8000 switch. This is a 3rd party limitation. If you experience -loss of packets, lower the MTU size. - -Allocating Rx Buffers when Using Jumbo Frames ---------------------------------------------- -Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if -the available memory is heavily fragmented. This issue may be seen with PCI-X -adapters or with packet split disabled. This can be reduced or eliminated -by changing the amount of available memory for receive buffer allocation, by -increasing /proc/sys/vm/min_free_kbytes. - -Multiple Interfaces on Same Ethernet Broadcast Network ------------------------------------------------------- -Due to the default ARP behavior on Linux, it is not possible to have -one system on two IP networks in the same Ethernet broadcast domain -(non-partitioned switch) behave as expected. All Ethernet interfaces -will respond to IP traffic for any IP address assigned to the system. -This results in unbalanced receive traffic. - -If you have multiple interfaces in a server, either turn on ARP -filtering by entering: - - echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter -(this only works if your kernel's version is higher than 2.4.5), - -NOTE: This setting is not saved across reboots. The configuration -change can be made permanent by adding the line: - net.ipv4.conf.all.arp_filter = 1 -to the file /etc/sysctl.conf - - or, - -install the interfaces in separate broadcast domains (either in -different switches or in a switch partitioned to VLANs). - -82541/82547 can't link or are slow to link with some link partners ------------------------------------------------------------------ -There is a known compatibility issue with 82541/82547 and some -low-end switches where the link will not be established, or will -be slow to establish. In particular, these switches are known to -be incompatible with 82541/82547: - - Planex FXG-08TE - I-O Data ETG-SH8 - -To workaround this issue, the driver can be compiled with an override -of the PHY's master/slave setting. Forcing master or forcing slave -mode will improve time-to-link. - - # make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n> - -Where <n> is: - - 0 = Hardware default - 1 = Master mode - 2 = Slave mode - 3 = Auto master/slave - -Disable rx flow control with ethtool ------------------------------------- -In order to disable receive flow control using ethtool, you must turn -off auto-negotiation on the same command line. - -For example: - - ethtool -A eth? autoneg off rx off - -Unplugging network cable while ethtool -p is running ----------------------------------------------------- -In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging -the network cable while ethtool -p is running will cause the system to -become unresponsive to keyboard commands, except for control-alt-delete. -Restarting the system appears to be the only remedy. - - Support ======= diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt new file mode 100644 index 000000000000..6aa048badf32 --- /dev/null +++ b/Documentation/networking/e1000e.txt @@ -0,0 +1,302 @@ +Linux* Driver for Intel(R) Network Connection +=============================================================== + +Intel Gigabit Linux driver. +Copyright(c) 1999 - 2010 Intel Corporation. + +Contents +======== + +- Identifying Your Adapter +- Command Line Parameters +- Additional Configurations +- Support + +Identifying Your Adapter +======================== + +The e1000e driver supports all PCI Express Intel(R) Gigabit Network +Connections, except those that are 82575, 82576 and 82580-based*. + +* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by + the e1000 driver, not the e1000e driver due to the 82546 part being used + behind a PCI Express bridge. + +For more information on how to identify your adapter, go to the Adapter & +Driver ID Guide at: + + http://support.intel.com/support/go/network/adapter/idguide.htm + +For the latest Intel network drivers for Linux, refer to the following +website. In the search field, enter your adapter name or type, or use the +networking link on the left to search for your adapter: + + http://support.intel.com/support/go/network/adapter/home.htm + +Command Line Parameters +======================= + +The default value for each parameter is generally the recommended setting, +unless otherwise noted. + +NOTES: For more information about the InterruptThrottleRate, + RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay + parameters, see the application note at: + http://www.intel.com/design/network/applnots/ap450.htm + +InterruptThrottleRate +--------------------- +Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, + 4=simplified balancing) +Default Value: 3 + +The driver can limit the amount of interrupts per second that the adapter +will generate for incoming packets. It does this by writing a value to the +adapter that is based on the maximum amount of interrupts that the adapter +will generate per second. + +Setting InterruptThrottleRate to a value greater or equal to 100 +will program the adapter to send out a maximum of that many interrupts +per second, even if more packets have come in. This reduces interrupt +load on the system and can lower CPU utilization under heavy load, +but will increase latency as packets are not processed as quickly. + +The driver has two adaptive modes (setting 1 or 3) in which +it dynamically adjusts the InterruptThrottleRate value based on the traffic +that it receives. After determining the type of incoming traffic in the last +timeframe, it will adjust the InterruptThrottleRate to an appropriate value +for that traffic. + +The algorithm classifies the incoming traffic every interval into +classes. Once the class is determined, the InterruptThrottleRate value is +adjusted to suit that traffic type the best. There are three classes defined: +"Bulk traffic", for large amounts of packets of normal size; "Low latency", +for small amounts of traffic and/or a significant percentage of small +packets; and "Lowest latency", for almost completely small packets or +minimal traffic. + +In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 +for traffic that falls in class "Bulk traffic". If traffic falls in the "Low +latency" or "Lowest latency" class, the InterruptThrottleRate is increased +stepwise to 20000. This default mode is suitable for most applications. + +For situations where low latency is vital such as cluster or +grid computing, the algorithm can reduce latency even more when +InterruptThrottleRate is set to mode 1. In this mode, which operates +the same as mode 3, the InterruptThrottleRate will be increased stepwise to +70000 for traffic in class "Lowest latency". + +In simplified mode the interrupt rate is based on the ratio of Tx and +Rx traffic. If the bytes per second rate is approximately equal the +interrupt rate will drop as low as 2000 interrupts per second. If the +traffic is mostly transmit or mostly receive, the interrupt rate could +be as high as 8000. + +Setting InterruptThrottleRate to 0 turns off any interrupt moderation +and may improve small packet latency, but is generally not suitable +for bulk throughput traffic. + +NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and + RxAbsIntDelay parameters. In other words, minimizing the receive + and/or transmit absolute delays does not force the controller to + generate more interrupts than what the Interrupt Throttle Rate + allows. + +NOTE: When e1000e is loaded with default settings and multiple adapters + are in use simultaneously, the CPU utilization may increase non- + linearly. In order to limit the CPU utilization without impacting + the overall throughput, we recommend that you load the driver as + follows: + + modprobe e1000e InterruptThrottleRate=3000,3000,3000 + + This sets the InterruptThrottleRate to 3000 interrupts/sec for + the first, second, and third instances of the driver. The range + of 2000 to 3000 interrupts per second works on a majority of + systems and is a good starting point, but the optimal value will + be platform-specific. If CPU utilization is not a concern, use + RX_POLLING (NAPI) and default driver settings. + +RxIntDelay +---------- +Valid Range: 0-65535 (0=off) +Default Value: 0 + +This value delays the generation of receive interrupts in units of 1.024 +microseconds. Receive interrupt reduction can improve CPU efficiency if +properly tuned for specific network traffic. Increasing this value adds +extra latency to frame reception and can end up decreasing the throughput +of TCP traffic. If the system is reporting dropped receives, this value +may be set too high, causing the driver to run out of available receive +descriptors. + +CAUTION: When setting RxIntDelay to a value other than 0, adapters may + hang (stop transmitting) under certain network conditions. If + this occurs a NETDEV WATCHDOG message is logged in the system + event log. In addition, the controller is automatically reset, + restoring the network connection. To eliminate the potential + for the hang ensure that RxIntDelay is set to 0. + +RxAbsIntDelay +------------- +Valid Range: 0-65535 (0=off) +Default Value: 8 + +This value, in units of 1.024 microseconds, limits the delay in which a +receive interrupt is generated. Useful only if RxIntDelay is non-zero, +this value ensures that an interrupt is generated after the initial +packet is received within the set amount of time. Proper tuning, +along with RxIntDelay, may improve traffic throughput in specific network +conditions. + +TxIntDelay +---------- +Valid Range: 0-65535 (0=off) +Default Value: 8 + +This value delays the generation of transmit interrupts in units of +1.024 microseconds. Transmit interrupt reduction can improve CPU +efficiency if properly tuned for specific network traffic. If the +system is reporting dropped transmits, this value may be set too high +causing the driver to run out of available transmit descriptors. + +TxAbsIntDelay +------------- +Valid Range: 0-65535 (0=off) +Default Value: 32 + +This value, in units of 1.024 microseconds, limits the delay in which a +transmit interrupt is generated. Useful only if TxIntDelay is non-zero, +this value ensures that an interrupt is generated after the initial +packet is sent on the wire within the set amount of time. Proper tuning, +along with TxIntDelay, may improve traffic throughput in specific +network conditions. + +Copybreak +--------- +Valid Range: 0-xxxxxxx (0=off) +Default Value: 256 + +Driver copies all packets below or equaling this size to a fresh Rx +buffer before handing it up the stack. + +This parameter is different than other parameters, in that it is a +single (not 1,1,1 etc.) parameter applied to all driver instances and +it is also available during runtime at +/sys/module/e1000e/parameters/copybreak + +SmartPowerDownEnable +-------------------- +Valid Range: 0-1 +Default Value: 0 (disabled) + +Allows PHY to turn off in lower power states. The user can set this parameter +in supported chipsets. + +KumeranLockLoss +--------------- +Valid Range: 0-1 +Default Value: 1 (enabled) + +This workaround skips resetting the PHY at shutdown for the initial +silicon releases of ICH8 systems. + +IntMode +------- +Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X) +Default Value: 2 + +Allows changing the interrupt mode at module load time, without requiring a +recompile. If the driver load fails to enable a specific interrupt mode, the +driver will try other interrupt modes, from least to most compatible. The +interrupt order is MSI-X, MSI, Legacy. If specifying MSI (IntMode=1) +interrupts, only MSI and Legacy will be attempted. + +CrcStripping +------------ +Valid Range: 0-1 +Default Value: 1 (enabled) + +Strip the CRC from received packets before sending up the network stack. If +you have a machine with a BMC enabled but cannot receive IPMI traffic after +loading or enabling the driver, try disabling this feature. + +WriteProtectNVM +--------------- +Valid Range: 0-1 +Default Value: 1 (enabled) + +Set the hardware to ignore all write/erase cycles to the GbE region in the +ICHx NVM (non-volatile memory). This feature can be disabled by the +WriteProtectNVM module parameter (enabled by default) only after a hardware +reset, but the machine must be power cycled before trying to enable writes. + +Note: the kernel boot option iomem=relaxed may need to be set if the kernel +config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the +NVM from user space via ethtool. + +Additional Configurations +========================= + + Jumbo Frames + ------------ + Jumbo Frames support is enabled by changing the MTU to a value larger than + the default of 1500. Use the ifconfig command to increase the MTU size. + For example: + + ifconfig eth<x> mtu 9000 up + + This setting is not saved across reboots. + + Notes: + + - The maximum MTU setting for Jumbo Frames is 9216. This value coincides + with the maximum Jumbo Frames size of 9234 bytes. + + - Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in + poor performance or loss of link. + + - Some adapters limit Jumbo Frames sized packets to a maximum of + 4096 bytes and some adapters do not support Jumbo Frames. + + + Ethtool + ------- + The driver utilizes the ethtool interface for driver configuration and + diagnostics, as well as displaying statistical information. We + strongly recommend downloading the latest version of Ethtool at: + + http://sourceforge.net/projects/gkernel. + + Speed and Duplex + ---------------- + Speed and Duplex are configured through the Ethtool* utility. For + instructions, refer to the Ethtool man page. + + Enabling Wake on LAN* (WoL) + --------------------------- + WoL is configured through the Ethtool* utility. For instructions on + enabling WoL with Ethtool, refer to the Ethtool man page. + + WoL will be enabled on the system during the next shut down or reboot. + For this driver version, in order to enable WoL, the e1000e driver must be + loaded when shutting down or rebooting the system. + + In most cases Wake On LAN is only supported on port A for multiple port + adapters. To verify if a port supports Wake on LAN run ethtool eth<X>. + + +Support +======= + +For general information, go to the Intel support website at: + + www.intel.com/support/ + +or the Intel Wired Networking project hosted by Sourceforge at: + + http://sourceforge.net/projects/e1000 + +If an issue is identified with the released source code on the supported +kernel with a supported adapter, email the specific information related +to the issue to e1000-devel@lists.sf.net diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt index 19015de6725f..21dd5d15b6b4 100755..100644 --- a/Documentation/networking/ixgbevf.txt +++ b/Documentation/networking/ixgbevf.txt @@ -1,19 +1,16 @@ Linux* Base Driver for Intel(R) Network Connection ================================================== -November 24, 2009 +Intel Gigabit Linux driver. +Copyright(c) 1999 - 2010 Intel Corporation. Contents ======== -- In This Release - Identifying Your Adapter - Known Issues/Troubleshooting - Support -In This Release -=============== - This file describes the ixgbevf Linux* Base Driver for Intel Network Connection. @@ -33,7 +30,7 @@ Identifying Your Adapter For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: - http://support.intel.com/support/network/sb/CS-008441.htm + http://support.intel.com/support/go/network/adapter/idguide.htm Known Issues/Troubleshooting ============================ @@ -57,34 +54,3 @@ or the Intel Wired Networking project hosted by Sourceforge at: If an issue is identified with the released source code on the supported kernel with a supported adapter, email the specific information related to the issue to e1000-devel@lists.sf.net - -License -======= - -Intel 10 Gigabit Linux driver. -Copyright(c) 1999 - 2009 Intel Corporation. - -This program is free software; you can redistribute it and/or modify it -under the terms and conditions of the GNU General Public License, -version 2, as published by the Free Software Foundation. - -This program is distributed in the hope it will be useful, but WITHOUT -ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -more details. - -You should have received a copy of the GNU General Public License along with -this program; if not, write to the Free Software Foundation, Inc., -51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - -The full GNU General Public License is included in this distribution in -the file called "COPYING". - -Trademarks -========== - -Intel, Itanium, and Pentium are trademarks or registered trademarks of -Intel Corporation or its subsidiaries in the United States and other -countries. - -* Other names and brands may be claimed as the property of others. diff --git a/MAINTAINERS b/MAINTAINERS index 668682d1f5fa..ffe8e551fe16 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -962,6 +962,13 @@ W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/mach-s3c6410/ +ARM/S5P ARM ARCHITECTURES +M: Kukjin Kim <kgene.kim@samsung.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-s5p*/ + ARM/SHMOBILE ARM ARCHITECTURE M: Paul Mundt <lethal@linux-sh.org> M: Magnus Damm <magnus.damm@gmail.com> @@ -973,6 +980,13 @@ S: Supported F: arch/arm/mach-shmobile/ F: drivers/sh/ +ARM/TELECHIPS ARM ARCHITECTURE +M: "Hans J. Koch" <hjk@linutronix.de> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/plat-tcc/ +F: arch/arm/mach-tcc8k/ + ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -3056,16 +3070,27 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ixp2000/ -INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe) +INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf) M: Jeff Kirsher <jeffrey.t.kirsher@intel.com> M: Jesse Brandeburg <jesse.brandeburg@intel.com> M: Bruce Allan <bruce.w.allan@intel.com> -M: Alex Duyck <alexander.h.duyck@intel.com> +M: Carolyn Wyborny <carolyn.wyborny@intel.com> +M: Don Skidmore <donald.c.skidmore@intel.com> +M: Greg Rose <gregory.v.rose@intel.com> M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> +M: Alex Duyck <alexander.h.duyck@intel.com> M: John Ronciak <john.ronciak@intel.com> L: e1000-devel@lists.sourceforge.net W: http://e1000.sourceforge.net/ S: Supported +F: Documentation/networking/e100.txt +F: Documentation/networking/e1000.txt +F: Documentation/networking/e1000e.txt +F: Documentation/networking/igb.txt +F: Documentation/networking/igbvf.txt +F: Documentation/networking/ixgb.txt +F: Documentation/networking/ixgbe.txt +F: Documentation/networking/ixgbevf.txt F: drivers/net/e100.c F: drivers/net/e1000/ F: drivers/net/e1000e/ @@ -3073,6 +3098,7 @@ F: drivers/net/igb/ F: drivers/net/igbvf/ F: drivers/net/ixgb/ F: drivers/net/ixgbe/ +F: drivers/net/ixgbevf/ INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT L: linux-wireless@vger.kernel.org @@ -3781,9 +3807,8 @@ W: http://www.syskonnect.com S: Supported MATROX FRAMEBUFFER DRIVER -M: Petr Vandrovec <vandrove@vc.cvut.cz> L: linux-fbdev@vger.kernel.org -S: Maintained +S: Orphan F: drivers/video/matrox/matroxfb_* F: include/linux/matroxfb.h @@ -3970,8 +3995,8 @@ S: Maintained F: drivers/net/natsemi.c NCP FILESYSTEM -M: Petr Vandrovec <vandrove@vc.cvut.cz> -S: Maintained +M: Petr Vandrovec <petr@vandrovec.name> +S: Odd Fixes F: fs/ncpfs/ NCR DUAL 700 SCSI DRIVER (MICROCHANNEL) @@ -5257,8 +5282,8 @@ F: drivers/*/*s3c2410* F: drivers/*/*/*s3c2410* TI DAVINCI MACHINE SUPPORT -P: Kevin Hilman -M: davinci-linux-open-source@linux.davincidsp.com +M: Kevin Hilman <khilman@deeprootsystems.com> +L: davinci-linux-open-source@linux.davincidsp.com (subscribers-only) Q: http://patchwork.kernel.org/project/linux-davinci/list/ S: Supported F: arch/arm/mach-davinci @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 36 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Sheep on Meth # *DOCUMENTATION* @@ -554,8 +554,15 @@ endif ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls else +# Some targets (ARM with Thumb2, for example), can't be built with frame +# pointers. For those, we don't have FUNCTION_TRACER automatically +# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is +# incompatible with -fomit-frame-pointer with current GCC, so we don't use +# -fomit-frame-pointer with FUNCTION_TRACER. +ifndef CONFIG_FUNCTION_TRACER KBUILD_CFLAGS += -fomit-frame-pointer endif +endif ifdef CONFIG_DEBUG_INFO KBUILD_CFLAGS += -g diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c index d290845aef59..6f7feb5db271 100644 --- a/arch/alpha/kernel/signal.c +++ b/arch/alpha/kernel/signal.c @@ -48,7 +48,7 @@ SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask) sigset_t mask; unsigned long res; - siginitset(&mask, newmask & ~_BLOCKABLE); + siginitset(&mask, newmask & _BLOCKABLE); res = sigprocmask(how, &mask, &oldmask); if (!res) { force_successful_syscall_return(); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 88c97bc7a6f5..2872c108361f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -19,6 +19,8 @@ config ARM select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) + select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) + select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) select HAVE_GENERIC_DMA_COHERENT select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO @@ -26,6 +28,7 @@ config ARM select HAVE_PERF_EVENTS select PERF_USE_VMALLOC select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7)) help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -145,6 +148,9 @@ config ARCH_HAS_CPUFREQ and that the relevant menu configurations are displayed for it. +config ARCH_HAS_CPU_IDLE_WAIT + def_bool y + config GENERIC_HWEIGHT bool default y @@ -565,6 +571,7 @@ config ARCH_TEGRA select HAVE_CLK select COMMON_CLKDEV select ARCH_HAS_BARRIERS if CACHE_L2X0 + select ARCH_HAS_CPUFREQ help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). @@ -678,8 +685,8 @@ config ARCH_S3C64XX help Samsung S3C64XX series based systems -config ARCH_S5P6440 - bool "Samsung S5P6440" +config ARCH_S5P64X0 + bool "Samsung S5P6440 S5P6450" select CPU_V6 select GENERIC_GPIO select HAVE_CLK @@ -688,7 +695,8 @@ config ARCH_S5P6440 select HAVE_S3C2410_I2C select HAVE_S3C_RTC help - Samsung S5P6440 CPU based systems + Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, + SMDK6450. config ARCH_S5P6442 bool "Samsung S5P6442" @@ -716,6 +724,7 @@ config ARCH_S5PC100 config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" select CPU_V7 + select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO select HAVE_CLK select ARM_L1_CACHE_SHIFT_6 @@ -729,9 +738,13 @@ config ARCH_S5PV210 config ARCH_S5PV310 bool "Samsung S5PV310/S5PC210" select CPU_V7 + select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO select HAVE_CLK + select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS + select HAVE_S3C_RTC + select HAVE_S3C2410_WATCHDOG help Samsung S5PV310 series based systems @@ -747,6 +760,15 @@ config ARCH_SHARK Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). +config ARCH_TCC_926 + bool "Telechips TCC ARM926-based systems" + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_CLOCKEVENTS + help + Support for Telechips TCC ARM926-based systems. + config ARCH_LH7A40X bool "Sharp LH7A40X" select CPU_ARM922T @@ -812,7 +834,7 @@ config ARCH_OMAP select GENERIC_CLOCKEVENTS select ARCH_HAS_HOLES_MEMORYMODEL help - Support for TI's OMAP platform (OMAP1 and OMAP2). + Support for TI's OMAP platform (OMAP1/2/3/4). config PLAT_SPEAR bool "ST SPEAr" @@ -915,6 +937,8 @@ source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-spear/Kconfig" +source "arch/arm/plat-tcc/Kconfig" + if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" @@ -928,7 +952,7 @@ if ARCH_S3C64XX source "arch/arm/mach-s3c64xx/Kconfig" endif -source "arch/arm/mach-s5p6440/Kconfig" +source "arch/arm/mach-s5p64x0/Kconfig" source "arch/arm/mach-s5p6442/Kconfig" @@ -1002,7 +1026,7 @@ endif config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" - depends on CPU_V6 && !SMP + depends on CPU_V6 help Invalidation of the Instruction Cache operation can fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. @@ -1101,6 +1125,20 @@ config ARM_ERRATA_720789 invalidated are not, resulting in an incoherency in the system page tables. The workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. + +config ARM_ERRATA_743622 + bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" + depends on CPU_V7 + help + This option enables the workaround for the 743622 Cortex-A9 + (r2p0..r2p2) erratum. Under very rare conditions, a faulty + optimisation in the Cortex-A9 Store Buffer may lead to data + corruption. This workaround sets a specific bit in the diagnostic + register of the Cortex-A9 which disables the Store Buffer + optimisation, preventing the defect from occurring. This has no + visible impact on the overall performance or power consumption of the + processor. + endmenu source "arch/arm/common/Kconfig" @@ -1167,13 +1205,13 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) + depends on EXPERIMENTAL depends on GENERIC_CLOCKEVENTS + depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ + ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\ - ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 + select HAVE_ARM_SCU help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1191,6 +1229,19 @@ config SMP If you don't know what to do here, say N. +config SMP_ON_UP + bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on SMP && !XIP && !THUMB2_KERNEL + default y + help + SMP kernels contain instructions which fail on non-SMP processors. + Enabling this option allows the kernel to modify itself to make + these instructions safe. Disabling it allows about 1K of space + savings. + + If you don't know what to do here, say Y. + config HAVE_ARM_SCU bool depends on SMP @@ -1241,12 +1292,9 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ - REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) + depends on SMP default y - select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \ - ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS + select HAVE_ARM_TWD help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1257,7 +1305,7 @@ source kernel/Kconfig.preempt config HZ int - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 @@ -1463,6 +1511,20 @@ config UACCESS_WITH_MEMCPY However, if the CPU data cache is using a write-allocate mode, this option is unlikely to provide any performance gain. +config SECCOMP + bool + prompt "Enable seccomp to safely compute untrusted bytecode" + ---help--- + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" help diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 91344af75f39..2fd0b99afc4b 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -2,6 +2,20 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config STRICT_DEVMEM + bool "Filter access to /dev/mem" + depends on MMU + ---help--- + If this option is disabled, you allow userspace (root) access to all + of memory, including kernel and userspace memory. Accidental + access to this is obviously disastrous, but specific access can + be used by people debugging the kernel. + + If this option is switched on, the /dev/mem file only allows + userspace access to memory mapped peripherals. + + If in doubt, say Y. + # RMK wants arm kernels compiled with frame pointers or stack unwinding. # If you know what you are doing and are willing to live without stack # traces, you can get a slightly smaller kernel by setting this option to @@ -27,6 +41,11 @@ config ARM_UNWIND the performance is not affected. Currently, this feature only works with EABI compilers. If unsure say Y. +config OLD_MCOUNT + bool + depends on FUNCTION_TRACER && FRAME_POINTER + default y + config DEBUG_USER bool "Verbose user fault messages" help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 59c1ce858fc8..b87aed028eef 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx -machine-$(CONFIG_ARCH_S5P6440) := s5p6440 +machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 @@ -183,6 +183,7 @@ machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile machine-$(CONFIG_ARCH_STMP378X) := stmp378x machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx +machine-$(CONFIG_ARCH_TCC8K) := tcc8k machine-$(CONFIG_ARCH_TEGRA) := tegra machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_U8500) := ux500 @@ -202,6 +203,7 @@ plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap plat-$(CONFIG_ARCH_S3C64XX) := samsung plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx +plat-$(CONFIG_ARCH_TCC_926) := tcc plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion @@ -245,13 +247,14 @@ ifeq ($(FASTFPE),$(wildcard $(FASTFPE))) FASTFPE_OBJ :=$(FASTFPE)/ endif -# If we have a machine-specific directory, then include it in the build. -core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ -core-y += $(machdirs) $(platdirs) core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ +# If we have a machine-specific directory, then include it in the build. +core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ +core-y += $(machdirs) $(platdirs) + drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ libs-y := arch/arm/lib/ $(libs-y) diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 7dfa9a85bc0c..ada6359160eb 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -67,25 +67,11 @@ static inline unsigned int gic_irq(unsigned int irq) /* * Routines to acknowledge, disable and enable interrupts - * - * Linux assumes that when we're done with an interrupt we need to - * unmask it, in the same way we need to unmask an interrupt when - * we first enable it. - * - * The GIC has a separate notion of "end of interrupt" to re-enable - * an interrupt after handling, in order to support hardware - * prioritisation. - * - * We can make the GIC behave in the way that Linux expects by making - * our "acknowledge" routine disable the interrupt, then mark it as - * complete. */ static void gic_ack_irq(unsigned int irq) { - u32 mask = 1 << (irq % 32); spin_lock(&irq_controller_lock); - writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4); writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI); spin_unlock(&irq_controller_lock); } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 517d50ddbeb3..c0258a8c103b 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -678,7 +678,7 @@ out: * %-EBUSY physical address already marked in-use. * %0 successful. */ -static int +static int __devinit __sa1111_probe(struct device *me, struct resource *mem, int irq) { struct sa1111 *sachip; diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index ba6670556f78..cdc40c4b8c48 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -17,6 +17,8 @@ CONFIG_MODVERSIONS=y CONFIG_ARCH_DAVINCI=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y +CONFIG_MACH_MITYOMAPL138=y +CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_DAVINCI_RESET_CLOCKS=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -79,6 +81,7 @@ CONFIG_I2C_DAVINCI=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_DUMMY=y CONFIG_REGULATOR_TPS6507X=y CONFIG_FB=y CONFIG_FB_DA8XX=y diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index b2038b0e266f..813cfb366c18 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -21,8 +21,14 @@ CONFIG_ARCH_MX2=y CONFIG_MACH_MX27=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y +CONFIG_MACH_CPUIMX27=y +CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y +CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y CONFIG_MACH_MX27_3DS=y +CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_IMX27LITE=y +CONFIG_MACH_PCA100=y +CONFIG_MACH_MXT_TD60=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y @@ -76,7 +82,9 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m # CONFIG_SERIO is not set +CONFIG_SERIAL_8250=m CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y # CONFIG_LEGACY_PTYS is not set @@ -85,19 +93,20 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y CONFIG_SPI=y -CONFIG_SPI_BITBANG=y +CONFIG_SPI_IMX=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_IMX=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=m +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_ULPI=y CONFIG_MMC=y CONFIG_MMC_MXC=y CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig deleted file mode 100644 index 2d29329749e4..000000000000 --- a/arch/arm/configs/mx31pdk_defconfig +++ /dev/null @@ -1,44 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MXC=y -# CONFIG_MACH_MX31ADS is not set -CONFIG_MACH_MX31_3DS=y -CONFIG_AEABI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_LRO is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 161f907b611f..f0c339fd5d21 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -24,6 +24,7 @@ CONFIG_MACH_PCM043=y CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_EUKREA_CPUIMX35=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y @@ -108,7 +109,6 @@ CONFIG_MMC=y CONFIG_MMC_MXC=y CONFIG_DMADEVICES=y # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig index a665ecbbe2bc..163cfee7644c 100644 --- a/arch/arm/configs/mx51_defconfig +++ b/arch/arm/configs/mx51_defconfig @@ -15,6 +15,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_ARCH_MXC=y CONFIG_ARCH_MX5=y CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX51_3DS=y +CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y @@ -69,7 +71,6 @@ CONFIG_REALTEK_PHY=y CONFIG_NATIONAL_PHY=y CONFIG_STE10XP=y CONFIG_LSI_ET1011C_PHY=y -CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y CONFIG_NET_ETHERNET=y @@ -100,7 +101,6 @@ CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_EHCI_HCD=y @@ -117,13 +117,11 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y -CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y -CONFIG_INOTIFY=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set @@ -136,6 +134,7 @@ CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y +CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=m CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -151,7 +150,6 @@ CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -159,7 +157,6 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_ARM_UNWIND is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -CONFIG_KEYS=y CONFIG_SECURITYFS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig deleted file mode 100644 index 56aebb69411d..000000000000 --- a/arch/arm/configs/n8x0_defconfig +++ /dev/null @@ -1,94 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -CONFIG_OMAP_RESET_CLOCKS=y -# CONFIG_OMAP_MUX is not set -# CONFIG_OMAP_MCBSP is not set -CONFIG_OMAP_MBOX_FWK=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_ARCH_OMAP2420=y -CONFIG_MACH_NOKIA_N8X0=y -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x10C08000 -CONFIG_ZBOOT_ROM_BSS=0x10200000 -CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_PM=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_OMAP2=y -CONFIG_MTD_ONENAND_OTP=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set -# CONFIG_I2C_HELPER_AUTO is not set -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -# CONFIG_HWMON is not set -CONFIG_MENELAUS=y -CONFIG_REGULATOR=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -# CONFIG_MUSB_PIO_ONLY is not set -CONFIG_USB_MUSB_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_ETH=m -CONFIG_USB_ETH_EEM=y -CONFIG_MMC=y -CONFIG_MMC_OMAP=y -CONFIG_EXT3_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap2plus_defconfig index 5db9a6be2054..ccedde1371c3 100644 --- a/arch/arm/configs/omap3_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -53,18 +53,18 @@ CONFIG_MACH_SBC3530=y CONFIG_MACH_OMAP_3630SDP=y CONFIG_MACH_OMAP_4430SDP=y CONFIG_ARM_THUMBEE=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y +# CONFIG_LOCAL_TIMERS is not set CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200" +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_FPE_NWFPE=y CONFIG_VFP=y CONFIG_NEON=y @@ -87,23 +87,23 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=y CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y +CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y -CONFIG_BT_HCIUART=y +CONFIG_BT_HIDP=m +CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM203X=y -CONFIG_BT_HCIBPA10X=y -CONFIG_CFG80211=y -CONFIG_MAC80211=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_CFG80211=m +CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_MAC80211_LEDS=y @@ -137,9 +137,11 @@ CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y CONFIG_SMC91X=y CONFIG_SMSC911X=y -CONFIG_LIBERTAS=y -CONFIG_LIBERTAS_USB=y -CONFIG_LIBERTAS_SDIO=y +CONFIG_KS8851=y +CONFIG_KS8851_MLL=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m CONFIG_LIBERTAS_DEBUG=y CONFIG_USB_USBNET=y CONFIG_USB_ALI_M5632=y @@ -201,8 +203,8 @@ CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_SND=y +CONFIG_SOUND=m +CONFIG_SND=m CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_VERBOSE_PRINTK=y @@ -218,9 +220,9 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set CONFIG_USB_MUSB_DEBUG=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y @@ -276,12 +278,11 @@ CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -CONFIG_LOCK_STAT=y +# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_LL=y CONFIG_SECURITY=y CONFIG_CRYPTO_MICHAEL_MIC=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig deleted file mode 100644 index 14c1e18c648f..000000000000 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ /dev/null @@ -1,125 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_ELF_CORE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP4=y -# CONFIG_ARCH_OMAP2PLUS_TYPICAL is not set -# CONFIG_ARCH_OMAP2 is not set -# CONFIG_ARCH_OMAP3 is not set -# CONFIG_OMAP_MUX is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_MACH_OMAP_4430SDP=y -# CONFIG_ARM_THUMB is not set -CONFIG_PL310_ERRATA_588369=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -# CONFIG_LOCAL_TIMERS is not set -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480" -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_KS8851=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig deleted file mode 100644 index ac08e51180dd..000000000000 --- a/arch/arm/configs/omap_generic_2420_defconfig +++ /dev/null @@ -1,37 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -# CONFIG_OMAP_MUX is not set -CONFIG_MACH_OMAP_GENERIC=y -CONFIG_ARCH_OMAP2420=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x10C08000 -CONFIG_ZBOOT_ROM_BSS=0x10200000 -CONFIG_FPE_NWFPE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_INOTIFY=y -CONFIG_ROMFS_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index 9312ef9f9bf4..5ca7a61f7c01 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -39,6 +39,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ARM_INTEGRATOR=y +CONFIG_ARM_CHARLCD=y CONFIG_NETDEVICES=y CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y @@ -52,10 +53,13 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_VERSATILE=y +CONFIG_SPI=y +CONFIG_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ARMCLCD=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set @@ -70,7 +74,13 @@ CONFIG_SND_ARMAACI=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y -CONFIG_INOTIFY=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PL031=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y @@ -80,6 +90,7 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index fb75192ee7e5..fcaa60328051 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -38,6 +38,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ARM_INTEGRATOR=y +CONFIG_ARM_CHARLCD=y CONFIG_NETDEVICES=y CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y @@ -51,10 +52,13 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_VERSATILE=y +CONFIG_SPI=y +CONFIG_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ARMCLCD=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set @@ -69,7 +73,13 @@ CONFIG_SND_ARMAACI=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y -CONFIG_INOTIFY=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PL031=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y @@ -79,6 +89,7 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p64x0_defconfig index 0b0266c6d326..2993ecd35145 100644 --- a/arch/arm/configs/s5p6440_defconfig +++ b/arch/arm/configs/s5p64x0_defconfig @@ -5,10 +5,11 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P6440=y +CONFIG_ARCH_S5P64X0=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDK6440=y +CONFIG_MACH_SMDK6450=y CONFIG_CPU_32v6K=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 46e5e0747269..c1c252cdca60 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -28,26 +28,9 @@ CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y CONFIG_PM=y # CONFIG_SUSPEND is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MISC_DEVICES is not set # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -58,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y -CONFIG_POWER_SUPPLY=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_REGULATOR=y @@ -66,24 +48,10 @@ CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_SOC=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_DEBUG=y CONFIG_MMC_ARMMMCI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set CONFIG_RTC_DRV_COH901331=y @@ -93,12 +61,11 @@ CONFIG_COH901318=y CONFIG_FUSE_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -# CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 6e8f05c8a1c8..062b58c029ab 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -154,16 +154,39 @@ .long 9999b,9001f; \ .popsection +#ifdef CONFIG_SMP +#define ALT_SMP(instr...) \ +9998: instr +#define ALT_UP(instr...) \ + .pushsection ".alt.smp.init", "a" ;\ + .long 9998b ;\ + instr ;\ + .popsection +#define ALT_UP_B(label) \ + .equ up_b_offset, label - 9998b ;\ + .pushsection ".alt.smp.init", "a" ;\ + .long 9998b ;\ + b . + up_b_offset ;\ + .popsection +#else +#define ALT_SMP(instr...) +#define ALT_UP(instr...) instr +#define ALT_UP_B(label) b label +#endif + /* * SMP data memory barrier */ .macro smp_dmb #ifdef CONFIG_SMP #if __LINUX_ARM_ARCH__ >= 7 - dmb + ALT_SMP(dmb) #elif __LINUX_ARM_ARCH__ == 6 - mcr p15, 0, r0, c7, c10, 5 @ dmb + ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb +#else +#error Incompatible SMP platform #endif + ALT_UP(nop) #endif .endm diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 4656a24058d2..3acd8fa25e34 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -137,10 +137,10 @@ #endif /* - * This flag is used to indicate that the page pointed to by a pte - * is dirty and requires cleaning before returning it to the user. + * This flag is used to indicate that the page pointed to by a pte is clean + * and does not require cleaning before returning it to the user. */ -#define PG_dcache_dirty PG_arch_1 +#define PG_dcache_clean PG_arch_1 /* * MM Cache Management @@ -156,6 +156,12 @@ * Please note that the implementation of these, and the required * effects are cache-type (VIVT/VIPT/PIPT) specific. * + * flush_icache_all() + * + * Unconditionally clean and invalidate the entire icache. + * Currently only needed for cache-v6.S and cache-v7.S, see + * __flush_icache_all for the generic implementation. + * * flush_kern_all() * * Unconditionally clean and invalidate the entire cache. @@ -206,6 +212,7 @@ */ struct cpu_cache_fns { + void (*flush_icache_all)(void); void (*flush_kern_all)(void); void (*flush_user_all)(void); void (*flush_user_range)(unsigned long, unsigned long, unsigned int); @@ -227,6 +234,7 @@ struct cpu_cache_fns { extern struct cpu_cache_fns cpu_cache; +#define __cpuc_flush_icache_all cpu_cache.flush_icache_all #define __cpuc_flush_kern_all cpu_cache.flush_kern_all #define __cpuc_flush_user_all cpu_cache.flush_user_all #define __cpuc_flush_user_range cpu_cache.flush_user_range @@ -246,6 +254,7 @@ extern struct cpu_cache_fns cpu_cache; #else +#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all) #define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) #define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) @@ -253,6 +262,7 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) #define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) +extern void __cpuc_flush_icache_all(void); extern void __cpuc_flush_kern_all(void); extern void __cpuc_flush_user_all(void); extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); @@ -291,6 +301,37 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, /* * Convert calls to our calling convention. */ + +/* Invalidate I-cache */ +#define __flush_icache_all_generic() \ + asm("mcr p15, 0, %0, c7, c5, 0" \ + : : "r" (0)); + +/* Invalidate I-cache inner shareable */ +#define __flush_icache_all_v7_smp() \ + asm("mcr p15, 0, %0, c7, c1, 0" \ + : : "r" (0)); + +/* + * Optimized __flush_icache_all for the common cases. Note that UP ARMv7 + * will fall through to use __flush_icache_all_generic. + */ +#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) || \ + defined(CONFIG_SMP_ON_UP) +#define __flush_icache_preferred __cpuc_flush_icache_all +#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP) +#define __flush_icache_preferred __flush_icache_all_v7_smp +#elif __LINUX_ARM_ARCH__ == 6 && defined(CONFIG_ARM_ERRATA_411920) +#define __flush_icache_preferred __cpuc_flush_icache_all +#else +#define __flush_icache_preferred __flush_icache_all_generic +#endif + +static inline void __flush_icache_all(void) +{ + __flush_icache_preferred(); +} + #define flush_cache_all() __cpuc_flush_kern_all() static inline void vivt_flush_cache_mm(struct mm_struct *mm) @@ -366,21 +407,6 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 extern void flush_dcache_page(struct page *); -static inline void __flush_icache_all(void) -{ -#ifdef CONFIG_ARM_ERRATA_411920 - extern void v6_icache_inval_all(void); - v6_icache_inval_all(); -#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7 - asm("mcr p15, 0, %0, c7, c1, 0 @ invalidate I-cache inner shareable\n" - : - : "r" (0)); -#else - asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" - : - : "r" (0)); -#endif -} static inline void flush_kernel_vmap_range(void *addr, int size) { if ((cache_is_vivt() || cache_is_vipt_aliasing())) @@ -405,9 +431,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma, #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE static inline void flush_kernel_dcache_page(struct page *page) { - /* highmem pages are always flushed upon kunmap already */ - if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page)) - __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } #define flush_dcache_mmap_lock(mapping) \ diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h index d3a4c2cb9f2f..c023db09fcc1 100644 --- a/arch/arm/include/asm/cachetype.h +++ b/arch/arm/include/asm/cachetype.h @@ -6,6 +6,7 @@ #define CACHEID_VIPT_ALIASING (1 << 2) #define CACHEID_VIPT (CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING) #define CACHEID_ASID_TAGGED (1 << 3) +#define CACHEID_VIPT_I_ALIASING (1 << 4) extern unsigned int cacheid; @@ -14,15 +15,18 @@ extern unsigned int cacheid; #define cache_is_vipt_nonaliasing() cacheid_is(CACHEID_VIPT_NONALIASING) #define cache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_ALIASING) #define icache_is_vivt_asid_tagged() cacheid_is(CACHEID_ASID_TAGGED) +#define icache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_I_ALIASING) /* * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture * Mask out support which will never be present on newer CPUs. * - v6+ is never VIVT - * - v7+ VIPT never aliases + * - v7+ VIPT never aliases on D-side */ #if __LINUX_ARM_ARCH__ >= 7 -#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING | CACHEID_ASID_TAGGED) +#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING |\ + CACHEID_ASID_TAGGED |\ + CACHEID_VIPT_I_ALIASING) #elif __LINUX_ARM_ARCH__ >= 6 #define __CACHEID_ARCH_MIN (~CACHEID_VIVT) #else diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 5747a8baa413..8bb66bca2e3e 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -127,4 +127,8 @@ struct mm_struct; extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk +extern int vectors_user_mapping(void); +#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping() +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES + #endif diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 103f7ee97313..f89515adac60 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -2,12 +2,30 @@ #define _ASM_ARM_FTRACE #ifdef CONFIG_FUNCTION_TRACER -#define MCOUNT_ADDR ((long)(mcount)) +#define MCOUNT_ADDR ((unsigned long)(__gnu_mcount_nc)) #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ #ifndef __ASSEMBLY__ extern void mcount(void); extern void __gnu_mcount_nc(void); + +#ifdef CONFIG_DYNAMIC_FTRACE +struct dyn_arch_ftrace { +#ifdef CONFIG_OLD_MCOUNT + bool old_mcount; +#endif +}; + +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + /* With Thumb-2, the recorded addresses have the lsb set */ + return addr & ~1; +} + +extern void ftrace_caller_old(void); +extern void ftrace_call_old(void); +#endif + #endif #endif diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h index 212e47828c79..7ecd793b8f5a 100644 --- a/arch/arm/include/asm/hardware/coresight.h +++ b/arch/arm/include/asm/hardware/coresight.h @@ -21,18 +21,6 @@ #define TRACER_RUNNING BIT(TRACER_RUNNING_BIT) #define TRACER_CYCLE_ACC BIT(TRACER_CYCLE_ACC_BIT) -struct tracectx { - unsigned int etb_bufsz; - void __iomem *etb_regs; - void __iomem *etm_regs; - unsigned long flags; - int ncmppairs; - int etm_portsz; - struct device *dev; - struct clk *emu_clk; - struct mutex mutex; -}; - #define TRACER_TIMEOUT 10000 #define etm_writel(t, v, x) \ @@ -112,10 +100,10 @@ struct tracectx { /* ETM status register, "ETM Architecture", 3.3.2 */ #define ETMR_STATUS (0x10) -#define ETMST_OVERFLOW (1 << 0) -#define ETMST_PROGBIT (1 << 1) -#define ETMST_STARTSTOP (1 << 2) -#define ETMST_TRIGGER (1 << 3) +#define ETMST_OVERFLOW BIT(0) +#define ETMST_PROGBIT BIT(1) +#define ETMST_STARTSTOP BIT(2) +#define ETMST_TRIGGER BIT(3) #define etm_progbit(t) (etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT) #define etm_started(t) (etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP) @@ -123,7 +111,7 @@ struct tracectx { #define ETMR_TRACEENCTRL2 0x1c #define ETMR_TRACEENCTRL 0x24 -#define ETMTE_INCLEXCL (1 << 24) +#define ETMTE_INCLEXCL BIT(24) #define ETMR_TRACEENEVT 0x20 #define ETMCTRL_OPTS (ETMCTRL_DO_CPRT | \ ETMCTRL_DATA_DO_ADDR | \ @@ -146,12 +134,12 @@ struct tracectx { #define ETBR_CTRL 0x20 #define ETBR_FORMATTERCTRL 0x304 #define ETBFF_ENFTC 1 -#define ETBFF_ENFCONT (1 << 1) -#define ETBFF_FONFLIN (1 << 4) -#define ETBFF_MANUAL_FLUSH (1 << 6) -#define ETBFF_TRIGIN (1 << 8) -#define ETBFF_TRIGEVT (1 << 9) -#define ETBFF_TRIGFL (1 << 10) +#define ETBFF_ENFCONT BIT(1) +#define ETBFF_FONFLIN BIT(4) +#define ETBFF_MANUAL_FLUSH BIT(6) +#define ETBFF_TRIGIN BIT(8) +#define ETBFF_TRIGEVT BIT(9) +#define ETBFF_TRIGFL BIT(10) #define etb_writel(t, v, x) \ (__raw_writel((v), (t)->etb_regs + (x))) diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h new file mode 100644 index 000000000000..4d8ae9d67abe --- /dev/null +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -0,0 +1,133 @@ +#ifndef _ARM_HW_BREAKPOINT_H +#define _ARM_HW_BREAKPOINT_H + +#ifdef __KERNEL__ + +struct task_struct; + +#ifdef CONFIG_HAVE_HW_BREAKPOINT + +struct arch_hw_breakpoint_ctrl { + u32 __reserved : 9, + mismatch : 1, + : 9, + len : 8, + type : 2, + privilege : 2, + enabled : 1; +}; + +struct arch_hw_breakpoint { + u32 address; + u32 trigger; + struct perf_event *suspended_wp; + struct arch_hw_breakpoint_ctrl ctrl; +}; + +static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl) +{ + return (ctrl.mismatch << 22) | (ctrl.len << 5) | (ctrl.type << 3) | + (ctrl.privilege << 1) | ctrl.enabled; +} + +static inline void decode_ctrl_reg(u32 reg, + struct arch_hw_breakpoint_ctrl *ctrl) +{ + ctrl->enabled = reg & 0x1; + reg >>= 1; + ctrl->privilege = reg & 0x3; + reg >>= 2; + ctrl->type = reg & 0x3; + reg >>= 2; + ctrl->len = reg & 0xff; + reg >>= 17; + ctrl->mismatch = reg & 0x1; +} + +/* Debug architecture numbers. */ +#define ARM_DEBUG_ARCH_RESERVED 0 /* In case of ptrace ABI updates. */ +#define ARM_DEBUG_ARCH_V6 1 +#define ARM_DEBUG_ARCH_V6_1 2 +#define ARM_DEBUG_ARCH_V7_ECP14 3 +#define ARM_DEBUG_ARCH_V7_MM 4 + +/* Breakpoint */ +#define ARM_BREAKPOINT_EXECUTE 0 + +/* Watchpoints */ +#define ARM_BREAKPOINT_LOAD 1 +#define ARM_BREAKPOINT_STORE 2 + +/* Privilege Levels */ +#define ARM_BREAKPOINT_PRIV 1 +#define ARM_BREAKPOINT_USER 2 + +/* Lengths */ +#define ARM_BREAKPOINT_LEN_1 0x1 +#define ARM_BREAKPOINT_LEN_2 0x3 +#define ARM_BREAKPOINT_LEN_4 0xf +#define ARM_BREAKPOINT_LEN_8 0xff + +/* Limits */ +#define ARM_MAX_BRP 16 +#define ARM_MAX_WRP 16 +#define ARM_MAX_HBP_SLOTS (ARM_MAX_BRP + ARM_MAX_WRP) + +/* DSCR method of entry bits. */ +#define ARM_DSCR_MOE(x) ((x >> 2) & 0xf) +#define ARM_ENTRY_BREAKPOINT 0x1 +#define ARM_ENTRY_ASYNC_WATCHPOINT 0x2 +#define ARM_ENTRY_SYNC_WATCHPOINT 0xa + +/* DSCR monitor/halting bits. */ +#define ARM_DSCR_HDBGEN (1 << 14) +#define ARM_DSCR_MDBGEN (1 << 15) + +/* opcode2 numbers for the co-processor instructions. */ +#define ARM_OP2_BVR 4 +#define ARM_OP2_BCR 5 +#define ARM_OP2_WVR 6 +#define ARM_OP2_WCR 7 + +/* Base register numbers for the debug registers. */ +#define ARM_BASE_BVR 64 +#define ARM_BASE_BCR 80 +#define ARM_BASE_WVR 96 +#define ARM_BASE_WCR 112 + +/* Accessor macros for the debug registers. */ +#define ARM_DBG_READ(M, OP2, VAL) do {\ + asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\ +} while (0) + +#define ARM_DBG_WRITE(M, OP2, VAL) do {\ + asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\ +} while (0) + +struct notifier_block; +struct perf_event; +struct pmu; + +extern struct pmu perf_ops_bp; +extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl, + int *gen_len, int *gen_type); +extern int arch_check_bp_in_kernelspace(struct perf_event *bp); +extern int arch_validate_hwbkpt_settings(struct perf_event *bp); +extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused, + unsigned long val, void *data); + +extern u8 arch_get_debug_arch(void); +extern u8 arch_get_max_wp_len(void); +extern void clear_ptrace_hw_breakpoint(struct task_struct *tsk); + +int arch_install_hw_breakpoint(struct perf_event *bp); +void arch_uninstall_hw_breakpoint(struct perf_event *bp); +void hw_breakpoint_pmu_read(struct perf_event *bp); +int hw_breakpoint_slots(int type); + +#else +static inline void clear_ptrace_hw_breakpoint(struct task_struct *tsk) {} + +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ +#endif /* __KERNEL__ */ +#endif /* _ARM_HW_BREAKPOINT_H */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 1261b1f928d9..815efa2d4e07 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -294,6 +294,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #define ARCH_HAS_VALID_PHYS_ADDR_RANGE extern int valid_phys_addr_range(unsigned long addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); +extern int devmem_is_allowed(unsigned long pfn); #endif /* diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index a0b3cac0547c..71605d9f8e42 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -18,7 +18,6 @@ #include <asm/cacheflush.h> #include <asm/cachetype.h> #include <asm/proc-fns.h> -#include <asm-generic/mm_hooks.h> void __check_kvm_seq(struct mm_struct *mm); @@ -134,4 +133,32 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, #define deactivate_mm(tsk,mm) do { } while (0) #define activate_mm(prev,next) switch_mm(prev, next, NULL) +/* + * We are inserting a "fake" vma for the user-accessible vector page so + * gdb and friends can get to it through ptrace and /proc/<pid>/mem. + * But we also want to remove it before the generic code gets to see it + * during process exit or the unmapping of it would cause total havoc. + * (the macro is used as remove_vma() is static to mm/mmap.c) + */ +#define arch_exit_mmap(mm) \ +do { \ + struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \ + if (high_vma) { \ + BUG_ON(high_vma->vm_next); /* it should be last */ \ + if (high_vma->vm_prev) \ + high_vma->vm_prev->vm_next = NULL; \ + else \ + mm->mmap = NULL; \ + rb_erase(&high_vma->vm_rb, &mm->mm_rb); \ + mm->mmap_cache = NULL; \ + mm->map_count--; \ + remove_vma(high_vma); \ + } \ +} while (0) + +static inline void arch_dup_mmap(struct mm_struct *oldmm, + struct mm_struct *mm) +{ +} + #endif diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index e4dfa69abb68..cbb0bc295d2b 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -7,20 +7,27 @@ struct unwind_table; -struct mod_arch_specific -{ #ifdef CONFIG_ARM_UNWIND - Elf_Shdr *unw_sec_init; - Elf_Shdr *unw_sec_devinit; - Elf_Shdr *unw_sec_core; - Elf_Shdr *sec_init_text; - Elf_Shdr *sec_devinit_text; - Elf_Shdr *sec_core_text; - struct unwind_table *unwind_init; - struct unwind_table *unwind_devinit; - struct unwind_table *unwind_core; -#endif +struct arm_unwind_mapping { + Elf_Shdr *unw_sec; + Elf_Shdr *sec_text; + struct unwind_table *unwind; +}; +enum { + ARM_SEC_INIT, + ARM_SEC_DEVINIT, + ARM_SEC_CORE, + ARM_SEC_EXIT, + ARM_SEC_DEVEXIT, + ARM_SEC_MAX, +}; +struct mod_arch_specific { + struct arm_unwind_mapping map[ARM_SEC_MAX]; }; +#else +struct mod_arch_specific { +}; +#endif /* * Include the ARM architecture version. diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index e90b167ea848..a9672e8406a3 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -278,9 +278,24 @@ extern struct page *empty_zero_page; #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) -#define set_pte_at(mm,addr,ptep,pteval) do { \ - set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \ - } while (0) +#if __LINUX_ARM_ARCH__ < 6 +static inline void __sync_icache_dcache(pte_t pteval) +{ +} +#else +extern void __sync_icache_dcache(pte_t pteval); +#endif + +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval) +{ + if (addr >= TASK_SIZE) + set_pte_ext(ptep, pteval, 0); + else { + __sync_icache_dcache(pteval); + set_pte_ext(ptep, pteval, PTE_EXT_NG); + } +} /* * The following only work if pte_present() is true. @@ -290,8 +305,13 @@ extern struct page *empty_zero_page; #define pte_write(pte) (pte_val(pte) & L_PTE_WRITE) #define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (pte_val(pte) & L_PTE_EXEC) #define pte_special(pte) (0) +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 7bed3daf83b8..67357baaeeeb 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -19,6 +19,7 @@ #ifdef __KERNEL__ +#include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> @@ -41,6 +42,9 @@ struct debug_entry { struct debug_info { int nsaved; struct debug_entry bp[2]; +#ifdef CONFIG_HAVE_HW_BREAKPOINT + struct perf_event *hbp[ARM_MAX_HBP_SLOTS]; +#endif }; struct thread_struct { diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 7ce15eb15f72..783d50f32618 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -29,6 +29,8 @@ #define PTRACE_SETCRUNCHREGS 26 #define PTRACE_GETVFPREGS 27 #define PTRACE_SETVFPREGS 28 +#define PTRACE_GETHBPREGS 29 +#define PTRACE_SETHBPREGS 30 /* * PSR bits diff --git a/arch/arm/include/asm/seccomp.h b/arch/arm/include/asm/seccomp.h new file mode 100644 index 000000000000..52b156b341f5 --- /dev/null +++ b/arch/arm/include/asm/seccomp.h @@ -0,0 +1,11 @@ +#ifndef _ASM_ARM_SECCOMP_H +#define _ASM_ARM_SECCOMP_H + +#include <linux/unistd.h> + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +#endif /* _ASM_ARM_SECCOMP_H */ diff --git a/arch/arm/include/asm/smp_mpidr.h b/arch/arm/include/asm/smp_mpidr.h new file mode 100644 index 000000000000..6a9307d64900 --- /dev/null +++ b/arch/arm/include/asm/smp_mpidr.h @@ -0,0 +1,17 @@ +#ifndef ASMARM_SMP_MIDR_H +#define ASMARM_SMP_MIDR_H + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("\n" \ + "1: mrc p15, 0, %0, c0, c0, 5\n" \ + " .pushsection \".alt.smp.init\", \"a\"\n"\ + " .long 1b\n" \ + " mov %0, #0\n" \ + " .popsection" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +#endif diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index e6215305544a..23e71ca3b6a8 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -13,9 +13,28 @@ static inline int tlb_ops_need_broadcast(void) return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2; } +#if !defined(CONFIG_SMP) || __LINUX_ARM_ARCH__ >= 7 +#define cache_ops_need_broadcast() 0 +#else static inline int cache_ops_need_broadcast(void) { return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1; } +#endif + +/* + * Return true if we are running on a SMP platform + */ +static inline bool is_smp(void) +{ +#ifndef CONFIG_SMP + return false; +#elif defined(CONFIG_SMP_ON_UP) + extern unsigned int smp_on_up; + return !!smp_on_up; +#else + return true; +#endif +} #endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 8ba1ccf82a02..1120f18a6b17 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -85,6 +85,10 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), int sig, int code, const char *name); +void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, + struct pt_regs *), + int sig, int code, const char *name); + #define xchg(ptr,x) \ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) @@ -325,6 +329,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size extern void disable_hlt(void); extern void enable_hlt(void); +void cpu_idle_wait(void); + #include <asm-generic/cmpxchg-local.h> #if __LINUX_ARM_ARCH__ < 6 diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 763e29fa8530..7b5cc8dae06e 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -144,6 +144,7 @@ extern void vfp_flush_hwstate(struct thread_info *); #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 #define TIF_RESTORE_SIGMASK 20 +#define TIF_SECCOMP 21 #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) @@ -153,6 +154,7 @@ extern void vfp_flush_hwstate(struct thread_info *); #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 33b546ae72d4..ce7378ea15a2 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -70,6 +70,10 @@ #undef _TLB #undef MULTI_TLB +#ifdef CONFIG_SMP_ON_UP +#define MULTI_TLB 1 +#endif + #define v3_tlb_flags (TLB_V3_FULL | TLB_V3_PAGE) #ifdef CONFIG_CPU_TLB_V3 @@ -185,17 +189,23 @@ # define v6wbi_always_flags (-1UL) #endif -#ifdef CONFIG_SMP -#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \ +#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID) -#else -#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ +#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BTB | \ TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID) -#endif #ifdef CONFIG_CPU_TLB_V7 -# define v7wbi_possible_flags v7wbi_tlb_flags -# define v7wbi_always_flags v7wbi_tlb_flags + +# ifdef CONFIG_SMP_ON_UP +# define v7wbi_possible_flags (v7wbi_tlb_flags_smp | v7wbi_tlb_flags_up) +# define v7wbi_always_flags (v7wbi_tlb_flags_smp & v7wbi_tlb_flags_up) +# elif defined(CONFIG_SMP) +# define v7wbi_possible_flags v7wbi_tlb_flags_smp +# define v7wbi_always_flags v7wbi_tlb_flags_smp +# else +# define v7wbi_possible_flags v7wbi_tlb_flags_up +# define v7wbi_always_flags v7wbi_tlb_flags_up +# endif # ifdef _TLB # define MULTI_TLB 1 # else @@ -560,12 +570,20 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); #endif /* - * if PG_dcache_dirty is set for the page, we need to ensure that any + * If PG_dcache_clean is not set for the page, we need to ensure that any * cache entries for the kernels virtual memory range are written - * back to the page. + * back to the page. On ARMv6 and later, the cache coherency is handled via + * the set_pte_at() function. */ +#if __LINUX_ARM_ARCH__ < 6 extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep); +#else +static inline void update_mmu_cache(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} +#endif #endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 980b78e31328..5b9b268f4fbb 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_HAVE_TCM) += tcm.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 8214bfebfaca..e5e1e5387678 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -165,6 +165,8 @@ EXPORT_SYMBOL(_find_next_bit_be); #endif #ifdef CONFIG_FUNCTION_TRACER +#ifdef CONFIG_OLD_MCOUNT EXPORT_SYMBOL(mcount); +#endif EXPORT_SYMBOL(__gnu_mcount_nc); #endif diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index bb8e93a76407..c09e3573c5de 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -46,7 +46,8 @@ * this macro assumes that irqstat (r6) and base (r5) are * preserved from get_irqnr_and_base above */ - test_for_ipi r0, r6, r5, lr + ALT_SMP(test_for_ipi r0, r6, r5, lr) + ALT_UP_B(9997f) movne r0, sp adrne lr, BSYM(1b) bne do_IPI @@ -57,6 +58,7 @@ adrne lr, BSYM(1b) bne do_local_timer #endif +9997: #endif .endm @@ -965,11 +967,8 @@ kuser_cmpxchg_fixup: beq 1b rsbs r0, r3, #0 /* beware -- each __kuser slot must be 8 instructions max */ -#ifdef CONFIG_SMP - b __kuser_memory_barrier -#else - usr_ret lr -#endif + ALT_SMP(b __kuser_memory_barrier) + ALT_UP(usr_ret lr) #endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 7885722bdf4e..8bfa98757cd2 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -129,30 +129,58 @@ ENDPROC(ret_from_fork) * clobber the ip register. This is OK because the ARM calling convention * allows it to be clobbered in subroutines and doesn't use it to hold * parameters.) + * + * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0" + * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see + * arch/arm/kernel/ftrace.c). */ + +#ifndef CONFIG_OLD_MCOUNT +#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4)) +#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0. +#endif +#endif + #ifdef CONFIG_DYNAMIC_FTRACE -ENTRY(mcount) +ENTRY(__gnu_mcount_nc) + mov ip, lr + ldmia sp!, {lr} + mov pc, ip +ENDPROC(__gnu_mcount_nc) + +ENTRY(ftrace_caller) stmdb sp!, {r0-r3, lr} mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE + ldr r1, [sp, #20] - .globl mcount_call -mcount_call: + .global ftrace_call +ftrace_call: bl ftrace_stub - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} + ldmia sp!, {r0-r3, ip, lr} + mov pc, ip +ENDPROC(ftrace_caller) -ENTRY(ftrace_caller) +#ifdef CONFIG_OLD_MCOUNT +ENTRY(mcount) + stmdb sp!, {lr} + ldr lr, [fp, #-4] + ldmia sp!, {pc} +ENDPROC(mcount) + +ENTRY(ftrace_caller_old) stmdb sp!, {r0-r3, lr} ldr r1, [fp, #-4] mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE - .globl ftrace_call -ftrace_call: + .globl ftrace_call_old +ftrace_call_old: bl ftrace_stub ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} +ENDPROC(ftrace_caller_old) +#endif #else @@ -160,7 +188,7 @@ ENTRY(__gnu_mcount_nc) stmdb sp!, {r0-r3, lr} ldr r0, =ftrace_trace_function ldr r2, [r0] - adr r0, ftrace_stub + adr r0, .Lftrace_stub cmp r0, r2 bne gnu_trace ldmia sp!, {r0-r3, ip, lr} @@ -170,11 +198,19 @@ gnu_trace: ldr r1, [sp, #20] @ lr of instrumented routine mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE - mov lr, pc + adr lr, BSYM(1f) mov pc, r2 +1: ldmia sp!, {r0-r3, ip, lr} mov pc, ip +ENDPROC(__gnu_mcount_nc) +#ifdef CONFIG_OLD_MCOUNT +/* + * This is under an ifdef in order to force link-time errors for people trying + * to build with !FRAME_POINTER with a GCC which doesn't use the new-style + * mcount. + */ ENTRY(mcount) stmdb sp!, {r0-r3, lr} ldr r0, =ftrace_trace_function @@ -193,12 +229,15 @@ trace: mov pc, r2 ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} +ENDPROC(mcount) +#endif #endif /* CONFIG_DYNAMIC_FTRACE */ - .globl ftrace_stub -ftrace_stub: +ENTRY(ftrace_stub) +.Lftrace_stub: mov pc, lr +ENDPROC(ftrace_stub) #endif /* CONFIG_FUNCTION_TRACER */ @@ -295,7 +334,6 @@ ENTRY(vector_swi) get_thread_info tsk adr tbl, sys_call_table @ load syscall table pointer - ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing #if defined(CONFIG_OABI_COMPAT) /* @@ -312,8 +350,20 @@ ENTRY(vector_swi) eor scno, scno, #__NR_SYSCALL_BASE @ check OS number #endif + ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing stmdb sp!, {r4, r5} @ push fifth and sixth args - tst ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? + +#ifdef CONFIG_SECCOMP + tst r10, #_TIF_SECCOMP + beq 1f + mov r0, scno + bl __secure_computing + add r0, sp, #S_R0 + S_OFF @ pointer to regs + ldmia r0, {r0 - r3} @ have to reload r0 - r3 +1: +#endif + + tst r10, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? bne __sys_trace cmp scno, #NR_syscalls @ check upper syscall limit diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 33c7077174db..a48d51257988 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -30,6 +30,21 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shishkin"); +/* + * ETM tracer state + */ +struct tracectx { + unsigned int etb_bufsz; + void __iomem *etb_regs; + void __iomem *etm_regs; + unsigned long flags; + int ncmppairs; + int etm_portsz; + struct device *dev; + struct clk *emu_clk; + struct mutex mutex; +}; + static struct tracectx tracer; static inline bool trace_isrunning(struct tracectx *t) diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 0298286ad4ad..971ac8c36ea7 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -2,102 +2,194 @@ * Dynamic function tracing support. * * Copyright (C) 2008 Abhishek Sagar <sagar.abhishek@gmail.com> + * Copyright (C) 2010 Rabin Vincent <rabin@rab.in> * * For licencing details, see COPYING. * * Defines low-level handling of mcount calls when the kernel * is compiled with the -pg flag. When using dynamic ftrace, the - * mcount call-sites get patched lazily with NOP till they are - * enabled. All code mutation routines here take effect atomically. + * mcount call-sites get patched with NOP till they are enabled. + * All code mutation routines here are called under stop_machine(). */ #include <linux/ftrace.h> +#include <linux/uaccess.h> #include <asm/cacheflush.h> #include <asm/ftrace.h> -#define PC_OFFSET 8 -#define BL_OPCODE 0xeb000000 -#define BL_OFFSET_MASK 0x00ffffff +#ifdef CONFIG_THUMB2_KERNEL +#define NOP 0xeb04f85d /* pop.w {lr} */ +#else +#define NOP 0xe8bd4000 /* pop {lr} */ +#endif -static unsigned long bl_insn; -static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */ +#ifdef CONFIG_OLD_MCOUNT +#define OLD_MCOUNT_ADDR ((unsigned long) mcount) +#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old) -unsigned char *ftrace_nop_replace(void) +#define OLD_NOP 0xe1a00000 /* mov r0, r0 */ + +static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) { - return (char *)&NOP; + return rec->arch.old_mcount ? OLD_NOP : NOP; } +static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) +{ + if (!rec->arch.old_mcount) + return addr; + + if (addr == MCOUNT_ADDR) + addr = OLD_MCOUNT_ADDR; + else if (addr == FTRACE_ADDR) + addr = OLD_FTRACE_ADDR; + + return addr; +} +#else +static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) +{ + return NOP; +} + +static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) +{ + return addr; +} +#endif + /* construct a branch (BL) instruction to addr */ -unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr) +#ifdef CONFIG_THUMB2_KERNEL +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) { + unsigned long s, j1, j2, i1, i2, imm10, imm11; + unsigned long first, second; long offset; - offset = (long)addr - (long)(pc + PC_OFFSET); + offset = (long)addr - (long)(pc + 4); + if (offset < -16777216 || offset > 16777214) { + WARN_ON_ONCE(1); + return 0; + } + + s = (offset >> 24) & 0x1; + i1 = (offset >> 23) & 0x1; + i2 = (offset >> 22) & 0x1; + imm10 = (offset >> 12) & 0x3ff; + imm11 = (offset >> 1) & 0x7ff; + + j1 = (!i1) ^ s; + j2 = (!i2) ^ s; + + first = 0xf000 | (s << 10) | imm10; + second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11; + + return (second << 16) | first; +} +#else +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +{ + long offset; + + offset = (long)addr - (long)(pc + 8); if (unlikely(offset < -33554432 || offset > 33554428)) { /* Can't generate branches that far (from ARM ARM). Ftrace * doesn't generate branches outside of kernel text. */ WARN_ON_ONCE(1); - return NULL; + return 0; } - offset = (offset >> 2) & BL_OFFSET_MASK; - bl_insn = BL_OPCODE | offset; - return (unsigned char *)&bl_insn; -} -int ftrace_modify_code(unsigned long pc, unsigned char *old_code, - unsigned char *new_code) -{ - unsigned long err = 0, replaced = 0, old, new; + offset = (offset >> 2) & 0x00ffffff; - old = *(unsigned long *)old_code; - new = *(unsigned long *)new_code; + return 0xeb000000 | offset; +} +#endif - __asm__ __volatile__ ( - "1: ldr %1, [%2] \n" - " cmp %1, %4 \n" - "2: streq %3, [%2] \n" - " cmpne %1, %3 \n" - " movne %0, #2 \n" - "3:\n" +static int ftrace_modify_code(unsigned long pc, unsigned long old, + unsigned long new) +{ + unsigned long replaced; - ".pushsection .fixup, \"ax\"\n" - "4: mov %0, #1 \n" - " b 3b \n" - ".popsection\n" + if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE)) + return -EFAULT; - ".pushsection __ex_table, \"a\"\n" - " .long 1b, 4b \n" - " .long 2b, 4b \n" - ".popsection\n" + if (replaced != old) + return -EINVAL; - : "=r"(err), "=r"(replaced) - : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced) - : "memory"); + if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE)) + return -EPERM; - if (!err && (replaced == old)) - flush_icache_range(pc, pc + MCOUNT_INSN_SIZE); + flush_icache_range(pc, pc + MCOUNT_INSN_SIZE); - return err; + return 0; } int ftrace_update_ftrace_func(ftrace_func_t func) { - int ret; unsigned long pc, old; - unsigned char *new; + unsigned long new; + int ret; pc = (unsigned long)&ftrace_call; memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE); new = ftrace_call_replace(pc, (unsigned long)func); - ret = ftrace_modify_code(pc, (unsigned char *)&old, new); + + ret = ftrace_modify_code(pc, old, new); + +#ifdef CONFIG_OLD_MCOUNT + if (!ret) { + pc = (unsigned long)&ftrace_call_old; + memcpy(&old, &ftrace_call_old, MCOUNT_INSN_SIZE); + new = ftrace_call_replace(pc, (unsigned long)func); + + ret = ftrace_modify_code(pc, old, new); + } +#endif + + return ret; +} + +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long new, old; + unsigned long ip = rec->ip; + + old = ftrace_nop_replace(rec); + new = ftrace_call_replace(ip, adjust_address(rec, addr)); + + return ftrace_modify_code(rec->ip, old, new); +} + +int ftrace_make_nop(struct module *mod, + struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long ip = rec->ip; + unsigned long old; + unsigned long new; + int ret; + + old = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_nop_replace(rec); + ret = ftrace_modify_code(ip, old, new); + +#ifdef CONFIG_OLD_MCOUNT + if (ret == -EINVAL && addr == MCOUNT_ADDR) { + rec->arch.old_mcount = true; + + old = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_nop_replace(rec); + ret = ftrace_modify_code(ip, old, new); + } +#endif + return ret; } -/* run from ftrace_init with irqs disabled */ int __init ftrace_dyn_arch_init(void *data) { - ftrace_mcount_set(data); + *(unsigned long *)data = 0; + return 0; } diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index b9505aa267c0..bbecaac1e013 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -15,55 +15,6 @@ #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2) - .align 2 - .type __switch_data, %object -__switch_data: - .long __mmap_switched - .long __data_loc @ r4 - .long _data @ r5 - .long __bss_start @ r6 - .long _end @ r7 - .long processor_id @ r4 - .long __machine_arch_type @ r5 - .long __atags_pointer @ r6 - .long cr_alignment @ r7 - .long init_thread_union + THREAD_START_SP @ sp - -/* - * The following fragment of code is executed with the MMU on in MMU mode, - * and uses absolute addresses; this is not position independent. - * - * r0 = cp#15 control register - * r1 = machine ID - * r2 = atags pointer - * r9 = processor ID - */ -__mmap_switched: - adr r3, __switch_data + 4 - - ldmia r3!, {r4, r5, r6, r7} - cmp r4, r5 @ Copy data segment if needed -1: cmpne r5, r6 - ldrne fp, [r4], #4 - strne fp, [r5], #4 - bne 1b - - mov fp, #0 @ Clear BSS (and zero fp) -1: cmp r6, r7 - strcc fp, [r6],#4 - bcc 1b - - ARM( ldmia r3, {r4, r5, r6, r7, sp}) - THUMB( ldmia r3, {r4, r5, r6, r7} ) - THUMB( ldr sp, [r3, #16] ) - str r9, [r4] @ Save processor ID - str r1, [r5] @ Save machine type - str r2, [r6] @ Save atags pointer - bic r4, r0, #CR_A @ Clear 'A' bit - stmia r7, {r0, r4} @ Save control register values - b start_kernel -ENDPROC(__mmap_switched) - /* * Exception handling. Something went wrong and we can't proceed. We * ought to tell the user, but since we don't have any guarantee that @@ -73,21 +24,7 @@ ENDPROC(__mmap_switched) * and hope for the best (useful if bootloader fails to pass a proper * machine ID for example). */ -__error_p: -#ifdef CONFIG_DEBUG_LL - adr r0, str_p1 - bl printascii - mov r0, r9 - bl printhex8 - adr r0, str_p2 - bl printascii - b __error -str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x" -str_p2: .asciz ").\n" - .align -#endif -ENDPROC(__error_p) - + __HEAD __error_a: #ifdef CONFIG_DEBUG_LL mov r4, r1 @ preserve machine ID @@ -97,7 +34,7 @@ __error_a: bl printhex8 adr r0, str_a2 bl printascii - adr r3, 4f + adr r3, __lookup_machine_type_data ldmia r3, {r4, r5, r6} @ get machine desc list sub r4, r3, r4 @ get offset between virt&phys add r5, r5, r4 @ convert virt addresses to @@ -125,78 +62,6 @@ str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n" .align #endif -__error: -#ifdef CONFIG_ARCH_RPC -/* - * Turn the screen red on a error - RiscPC only. - */ - mov r0, #0x02000000 - mov r3, #0x11 - orr r3, r3, r3, lsl #8 - orr r3, r3, r3, lsl #16 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 - str r3, [r0], #4 -#endif -1: mov r0, r0 - b 1b -ENDPROC(__error) - - -/* - * Read processor ID register (CP#15, CR0), and look up in the linker-built - * supported processor list. Note that we can't use the absolute addresses - * for the __proc_info lists since we aren't running with the MMU on - * (and therefore, we are not in the correct address space). We have to - * calculate the offset. - * - * r9 = cpuid - * Returns: - * r3, r4, r6 corrupted - * r5 = proc_info pointer in physical address space - * r9 = cpuid (preserved) - */ -__lookup_processor_type: - adr r3, 3f - ldmia r3, {r5 - r7} - add r3, r3, #8 - sub r3, r3, r7 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space -1: ldmia r5, {r3, r4} @ value, mask - and r4, r4, r9 @ mask wanted bits - teq r3, r4 - beq 2f - add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) - cmp r5, r6 - blo 1b - mov r5, #0 @ unknown processor -2: mov pc, lr -ENDPROC(__lookup_processor_type) - -/* - * This provides a C-API version of the above function. - */ -ENTRY(lookup_processor_type) - stmfd sp!, {r4 - r7, r9, lr} - mov r9, r0 - bl __lookup_processor_type - mov r0, r5 - ldmfd sp!, {r4 - r7, r9, pc} -ENDPROC(lookup_processor_type) - -/* - * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for - * more information about the __proc_info and __arch_info structures. - */ - .align 2 -3: .long __proc_info_begin - .long __proc_info_end -4: .long . - .long __arch_info_begin - .long __arch_info_end - /* * Lookup machine architecture in the linker-build list of architectures. * Note that we can't use the absolute addresses for the __arch_info @@ -209,7 +74,7 @@ ENDPROC(lookup_processor_type) * r5 = mach_info pointer in physical address space */ __lookup_machine_type: - adr r3, 4b + adr r3, __lookup_machine_type_data ldmia r3, {r4, r5, r6} sub r3, r3, r4 @ get offset between virt&phys add r5, r5, r3 @ convert virt addresses to @@ -225,15 +90,16 @@ __lookup_machine_type: ENDPROC(__lookup_machine_type) /* - * This provides a C-API version of the above function. + * Look in arch/arm/kernel/arch.[ch] for information about the + * __arch_info structures. */ -ENTRY(lookup_machine_type) - stmfd sp!, {r4 - r6, lr} - mov r1, r0 - bl __lookup_machine_type - mov r0, r5 - ldmfd sp!, {r4 - r6, pc} -ENDPROC(lookup_machine_type) + .align 2 + .type __lookup_machine_type_data, %object +__lookup_machine_type_data: + .long . + .long __arch_info_begin + .long __arch_info_end + .size __lookup_machine_type_data, . - __lookup_machine_type_data /* Determine validity of the r2 atags pointer. The heuristic requires * that the pointer be aligned, in the first 16k of physical RAM and @@ -265,3 +131,150 @@ __vet_atags: 1: mov r2, #0 mov pc, lr ENDPROC(__vet_atags) + +/* + * The following fragment of code is executed with the MMU on in MMU mode, + * and uses absolute addresses; this is not position independent. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r9 = processor ID + */ + __INIT +__mmap_switched: + adr r3, __mmap_switched_data + + ldmia r3!, {r4, r5, r6, r7} + cmp r4, r5 @ Copy data segment if needed +1: cmpne r5, r6 + ldrne fp, [r4], #4 + strne fp, [r5], #4 + bne 1b + + mov fp, #0 @ Clear BSS (and zero fp) +1: cmp r6, r7 + strcc fp, [r6],#4 + bcc 1b + + ARM( ldmia r3, {r4, r5, r6, r7, sp}) + THUMB( ldmia r3, {r4, r5, r6, r7} ) + THUMB( ldr sp, [r3, #16] ) + str r9, [r4] @ Save processor ID + str r1, [r5] @ Save machine type + str r2, [r6] @ Save atags pointer + bic r4, r0, #CR_A @ Clear 'A' bit + stmia r7, {r0, r4} @ Save control register values + b start_kernel +ENDPROC(__mmap_switched) + + .align 2 + .type __mmap_switched_data, %object +__mmap_switched_data: + .long __data_loc @ r4 + .long _sdata @ r5 + .long __bss_start @ r6 + .long _end @ r7 + .long processor_id @ r4 + .long __machine_arch_type @ r5 + .long __atags_pointer @ r6 + .long cr_alignment @ r7 + .long init_thread_union + THREAD_START_SP @ sp + .size __mmap_switched_data, . - __mmap_switched_data + +/* + * This provides a C-API version of __lookup_machine_type + */ +ENTRY(lookup_machine_type) + stmfd sp!, {r4 - r6, lr} + mov r1, r0 + bl __lookup_machine_type + mov r0, r5 + ldmfd sp!, {r4 - r6, pc} +ENDPROC(lookup_machine_type) + +/* + * This provides a C-API version of __lookup_processor_type + */ +ENTRY(lookup_processor_type) + stmfd sp!, {r4 - r6, r9, lr} + mov r9, r0 + bl __lookup_processor_type + mov r0, r5 + ldmfd sp!, {r4 - r6, r9, pc} +ENDPROC(lookup_processor_type) + +/* + * Read processor ID register (CP#15, CR0), and look up in the linker-built + * supported processor list. Note that we can't use the absolute addresses + * for the __proc_info lists since we aren't running with the MMU on + * (and therefore, we are not in the correct address space). We have to + * calculate the offset. + * + * r9 = cpuid + * Returns: + * r3, r4, r6 corrupted + * r5 = proc_info pointer in physical address space + * r9 = cpuid (preserved) + */ + __CPUINIT +__lookup_processor_type: + adr r3, __lookup_processor_type_data + ldmia r3, {r4 - r6} + sub r3, r3, r4 @ get offset between virt&phys + add r5, r5, r3 @ convert virt addresses to + add r6, r6, r3 @ physical address space +1: ldmia r5, {r3, r4} @ value, mask + and r4, r4, r9 @ mask wanted bits + teq r3, r4 + beq 2f + add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list) + cmp r5, r6 + blo 1b + mov r5, #0 @ unknown processor +2: mov pc, lr +ENDPROC(__lookup_processor_type) + +/* + * Look in <asm/procinfo.h> for information about the __proc_info structure. + */ + .align 2 + .type __lookup_processor_type_data, %object +__lookup_processor_type_data: + .long . + .long __proc_info_begin + .long __proc_info_end + .size __lookup_processor_type_data, . - __lookup_processor_type_data + +__error_p: +#ifdef CONFIG_DEBUG_LL + adr r0, str_p1 + bl printascii + mov r0, r9 + bl printhex8 + adr r0, str_p2 + bl printascii + b __error +str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x" +str_p2: .asciz ").\n" + .align +#endif +ENDPROC(__error_p) + +__error: +#ifdef CONFIG_ARCH_RPC +/* + * Turn the screen red on a error - RiscPC only. + */ + mov r0, #0x02000000 + mov r3, #0x11 + orr r3, r3, r3, lsl #8 + orr r3, r3, r3, lsl #16 + str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 + str r3, [r0], #4 +#endif +1: mov r0, r0 + b 1b +ENDPROC(__error) diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 573b803dc6bf..814ce1a73270 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -48,8 +48,6 @@ ENTRY(stext) movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' - ldr r13, __switch_data @ address to jump to after - @ the initialization is done adr lr, BSYM(__after_proc_init) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) @@ -87,8 +85,7 @@ __after_proc_init: mcr p15, 0, r0, c1, c0, 0 @ write control reg #endif /* CONFIG_CPU_CP15 */ - mov r3, r13 - mov pc, r3 @ clear the BSS and jump + b __mmap_switched @ clear the BSS and jump @ to start_kernel ENDPROC(__after_proc_init) .ltorg diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index eb62bf947212..767390449e0a 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -86,6 +86,9 @@ ENTRY(stext) movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' bl __vet_atags +#ifdef CONFIG_SMP_ON_UP + bl __fixup_smp +#endif bl __create_page_tables /* @@ -95,113 +98,15 @@ ENTRY(stext) * above. On return, the CPU will be ready for the MMU to be * turned on, and r0 will hold the CPU control register value. */ - ldr r13, __switch_data @ address to jump to after + ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled - adr lr, BSYM(__enable_mmu) @ return (PIC) address + adr lr, BSYM(1f) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( mov pc, r12 ) +1: b __enable_mmu ENDPROC(stext) - -#if defined(CONFIG_SMP) -ENTRY(secondary_startup) - /* - * Common entry point for secondary CPUs. - * - * Ensure that we're in SVC mode, and IRQs are disabled. Lookup - * the processor type - there is no need to check the machine type - * as it has already been validated by the primary processor. - */ - setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 - mrc p15, 0, r9, c0, c0 @ get processor id - bl __lookup_processor_type - movs r10, r5 @ invalid processor? - moveq r0, #'p' @ yes, error 'p' - beq __error - - /* - * Use the page tables supplied from __cpu_up. - */ - adr r4, __secondary_data - ldmia r4, {r5, r7, r12} @ address to jump to after - sub r4, r4, r5 @ mmu has been enabled - ldr r4, [r7, r4] @ get secondary_data.pgdir - adr lr, BSYM(__enable_mmu) @ return address - mov r13, r12 @ __secondary_switched address - ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor - @ (return control reg) - THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) -ENDPROC(secondary_startup) - - /* - * r6 = &secondary_data - */ -ENTRY(__secondary_switched) - ldr sp, [r7, #4] @ get secondary_data.stack - mov fp, #0 - b secondary_start_kernel -ENDPROC(__secondary_switched) - - .type __secondary_data, %object -__secondary_data: - .long . - .long secondary_data - .long __secondary_switched -#endif /* defined(CONFIG_SMP) */ - - - -/* - * Setup common bits before finally enabling the MMU. Essentially - * this is just loading the page table pointer and domain access - * registers. - */ -__enable_mmu: -#ifdef CONFIG_ALIGNMENT_TRAP - orr r0, r0, #CR_A -#else - bic r0, r0, #CR_A -#endif -#ifdef CONFIG_CPU_DCACHE_DISABLE - bic r0, r0, #CR_C -#endif -#ifdef CONFIG_CPU_BPREDICT_DISABLE - bic r0, r0, #CR_Z -#endif -#ifdef CONFIG_CPU_ICACHE_DISABLE - bic r0, r0, #CR_I -#endif - mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ - domain_val(DOMAIN_IO, DOMAIN_CLIENT)) - mcr p15, 0, r5, c3, c0, 0 @ load domain access register - mcr p15, 0, r4, c2, c0, 0 @ load page table pointer - b __turn_mmu_on -ENDPROC(__enable_mmu) - -/* - * Enable the MMU. This completely changes the structure of the visible - * memory space. You will not be able to trace execution through this. - * If you have an enquiry about this, *please* check the linux-arm-kernel - * mailing list archives BEFORE sending another post to the list. - * - * r0 = cp#15 control register - * r13 = *virtual* address to jump to upon completion - * - * other registers depend on the function called upon completion - */ - .align 5 -__turn_mmu_on: - mov r0, r0 - mcr p15, 0, r0, c1, c0, 0 @ write control reg - mrc p15, 0, r3, c0, c0, 0 @ read id reg - mov r3, r3 - mov r3, r13 - mov pc, r3 -ENDPROC(__turn_mmu_on) - + .ltorg /* * Setup the initial page tables. We only setup the barest @@ -213,7 +118,7 @@ ENDPROC(__turn_mmu_on) * r10 = procinfo * * Returns: - * r0, r3, r6, r7 corrupted + * r0, r3, r5-r7 corrupted * r4 = physical page table address */ __create_page_tables: @@ -235,20 +140,30 @@ __create_page_tables: ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags /* - * Create identity mapping for first MB of kernel to - * cater for the MMU enable. This identity mapping - * will be removed by paging_init(). We use our current program - * counter to determine corresponding section base address. + * Create identity mapping to cater for __enable_mmu. + * This identity mapping will be removed by paging_init(). */ - mov r6, pc - mov r6, r6, lsr #20 @ start of kernel section - orr r3, r7, r6, lsl #20 @ flags + kernel base - str r3, [r4, r6, lsl #2] @ identity mapping + adr r0, __enable_mmu_loc + ldmia r0, {r3, r5, r6} + sub r0, r0, r3 @ virt->phys offset + add r5, r5, r0 @ phys __enable_mmu + add r6, r6, r0 @ phys __enable_mmu_end + mov r5, r5, lsr #20 + mov r6, r6, lsr #20 + +1: orr r3, r7, r5, lsl #20 @ flags + kernel base + str r3, [r4, r5, lsl #2] @ identity mapping + teq r5, r6 + addne r5, r5, #1 @ next section + bne 1b /* * Now setup the pagetables for our kernel direct * mapped region. */ + mov r3, pc + mov r3, r3, lsr #20 + orr r3, r7, r3, lsl #20 add r0, r4, #(KERNEL_START & 0xff000000) >> 18 str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]! ldr r6, =(KERNEL_END - 1) @@ -332,5 +247,168 @@ __create_page_tables: mov pc, lr ENDPROC(__create_page_tables) .ltorg +__enable_mmu_loc: + .long . + .long __enable_mmu + .long __enable_mmu_end + +#if defined(CONFIG_SMP) + __CPUINIT +ENTRY(secondary_startup) + /* + * Common entry point for secondary CPUs. + * + * Ensure that we're in SVC mode, and IRQs are disabled. Lookup + * the processor type - there is no need to check the machine type + * as it has already been validated by the primary processor. + */ + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 + mrc p15, 0, r9, c0, c0 @ get processor id + bl __lookup_processor_type + movs r10, r5 @ invalid processor? + moveq r0, #'p' @ yes, error 'p' + beq __error_p + + /* + * Use the page tables supplied from __cpu_up. + */ + adr r4, __secondary_data + ldmia r4, {r5, r7, r12} @ address to jump to after + sub r4, r4, r5 @ mmu has been enabled + ldr r4, [r7, r4] @ get secondary_data.pgdir + adr lr, BSYM(__enable_mmu) @ return address + mov r13, r12 @ __secondary_switched address + ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor + @ (return control reg) + THUMB( add r12, r10, #PROCINFO_INITFUNC ) + THUMB( mov pc, r12 ) +ENDPROC(secondary_startup) + + /* + * r6 = &secondary_data + */ +ENTRY(__secondary_switched) + ldr sp, [r7, #4] @ get secondary_data.stack + mov fp, #0 + b secondary_start_kernel +ENDPROC(__secondary_switched) + + .type __secondary_data, %object +__secondary_data: + .long . + .long secondary_data + .long __secondary_switched +#endif /* defined(CONFIG_SMP) */ + + + +/* + * Setup common bits before finally enabling the MMU. Essentially + * this is just loading the page table pointer and domain access + * registers. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r4 = page table pointer + * r9 = processor ID + * r13 = *virtual* address to jump to upon completion + */ +__enable_mmu: +#ifdef CONFIG_ALIGNMENT_TRAP + orr r0, r0, #CR_A +#else + bic r0, r0, #CR_A +#endif +#ifdef CONFIG_CPU_DCACHE_DISABLE + bic r0, r0, #CR_C +#endif +#ifdef CONFIG_CPU_BPREDICT_DISABLE + bic r0, r0, #CR_Z +#endif +#ifdef CONFIG_CPU_ICACHE_DISABLE + bic r0, r0, #CR_I +#endif + mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ + domain_val(DOMAIN_IO, DOMAIN_CLIENT)) + mcr p15, 0, r5, c3, c0, 0 @ load domain access register + mcr p15, 0, r4, c2, c0, 0 @ load page table pointer + b __turn_mmu_on +ENDPROC(__enable_mmu) + +/* + * Enable the MMU. This completely changes the structure of the visible + * memory space. You will not be able to trace execution through this. + * If you have an enquiry about this, *please* check the linux-arm-kernel + * mailing list archives BEFORE sending another post to the list. + * + * r0 = cp#15 control register + * r1 = machine ID + * r2 = atags pointer + * r9 = processor ID + * r13 = *virtual* address to jump to upon completion + * + * other registers depend on the function called upon completion + */ + .align 5 +__turn_mmu_on: + mov r0, r0 + mcr p15, 0, r0, c1, c0, 0 @ write control reg + mrc p15, 0, r3, c0, c0, 0 @ read id reg + mov r3, r3 + mov r3, r13 + mov pc, r3 +__enable_mmu_end: +ENDPROC(__turn_mmu_on) + + +#ifdef CONFIG_SMP_ON_UP +__fixup_smp: + mov r7, #0x00070000 + orr r6, r7, #0xff000000 @ mask 0xff070000 + orr r7, r7, #0x41000000 @ val 0x41070000 + and r0, r9, r6 + teq r0, r7 @ ARM CPU and ARMv6/v7? + bne __fixup_smp_on_up @ no, assume UP + + orr r6, r6, #0x0000ff00 + orr r6, r6, #0x000000f0 @ mask 0xff07fff0 + orr r7, r7, #0x0000b000 + orr r7, r7, #0x00000020 @ val 0x4107b020 + and r0, r9, r6 + teq r0, r7 @ ARM 11MPCore? + moveq pc, lr @ yes, assume SMP + + mrc p15, 0, r0, c0, c0, 5 @ read MPIDR + tst r0, #1 << 31 + movne pc, lr @ bit 31 => SMP + +__fixup_smp_on_up: + adr r0, 1f + ldmia r0, {r3, r6, r7} + sub r3, r0, r3 + add r6, r6, r3 + add r7, r7, r3 +2: cmp r6, r7 + ldmia r6!, {r0, r4} + strlo r4, [r0, r3] + blo 2b + mov pc, lr +ENDPROC(__fixup_smp) + +1: .word . + .word __smpalt_begin + .word __smpalt_end + + .pushsection .data + .globl smp_on_up +smp_on_up: + ALT_SMP(.long 1) + ALT_UP(.long 0) + .popsection + +#endif #include "head-common.S" diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c new file mode 100644 index 000000000000..54593b0c241b --- /dev/null +++ b/arch/arm/kernel/hw_breakpoint.c @@ -0,0 +1,849 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2009, 2010 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +/* + * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility, + * using the CPU's debug registers. + */ +#define pr_fmt(fmt) "hw-breakpoint: " fmt + +#include <linux/errno.h> +#include <linux/perf_event.h> +#include <linux/hw_breakpoint.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/cputype.h> +#include <asm/current.h> +#include <asm/hw_breakpoint.h> +#include <asm/kdebug.h> +#include <asm/system.h> +#include <asm/traps.h> + +/* Breakpoint currently in use for each BRP. */ +static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]); + +/* Watchpoint currently in use for each WRP. */ +static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]); + +/* Number of BRP/WRP registers on this CPU. */ +static int core_num_brps; +static int core_num_wrps; + +/* Debug architecture version. */ +static u8 debug_arch; + +/* Maximum supported watchpoint length. */ +static u8 max_watchpoint_len; + +/* Determine number of BRP registers available. */ +static int get_num_brps(void) +{ + u32 didr; + ARM_DBG_READ(c0, 0, didr); + return ((didr >> 24) & 0xf) + 1; +} + +/* Determine number of WRP registers available. */ +static int get_num_wrps(void) +{ + /* + * FIXME: When a watchpoint fires, the only way to work out which + * watchpoint it was is by disassembling the faulting instruction + * and working out the address of the memory access. + * + * Furthermore, we can only do this if the watchpoint was precise + * since imprecise watchpoints prevent us from calculating register + * based addresses. + * + * For the time being, we only report 1 watchpoint register so we + * always know which watchpoint fired. In the future we can either + * add a disassembler and address generation emulator, or we can + * insert a check to see if the DFAR is set on watchpoint exception + * entry [the ARM ARM states that the DFAR is UNKNOWN, but + * experience shows that it is set on some implementations]. + */ + +#if 0 + u32 didr, wrps; + ARM_DBG_READ(c0, 0, didr); + return ((didr >> 28) & 0xf) + 1; +#endif + + return 1; +} + +int hw_breakpoint_slots(int type) +{ + /* + * We can be called early, so don't rely on + * our static variables being initialised. + */ + switch (type) { + case TYPE_INST: + return get_num_brps(); + case TYPE_DATA: + return get_num_wrps(); + default: + pr_warning("unknown slot type: %d\n", type); + return 0; + } +} + +/* Determine debug architecture. */ +static u8 get_debug_arch(void) +{ + u32 didr; + + /* Do we implement the extended CPUID interface? */ + if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { + pr_warning("CPUID feature registers not supported. " + "Assuming v6 debug is present.\n"); + return ARM_DEBUG_ARCH_V6; + } + + ARM_DBG_READ(c0, 0, didr); + return (didr >> 16) & 0xf; +} + +/* Does this core support mismatch breakpoints? */ +static int core_has_mismatch_bps(void) +{ + return debug_arch >= ARM_DEBUG_ARCH_V7_ECP14 && core_num_brps > 1; +} + +u8 arch_get_debug_arch(void) +{ + return debug_arch; +} + +#define READ_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_READ(c ## M, OP2, VAL); \ + break + +#define WRITE_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_WRITE(c ## M, OP2, VAL);\ + break + +#define GEN_READ_WB_REG_CASES(OP2, VAL) \ + READ_WB_REG_CASE(OP2, 0, VAL); \ + READ_WB_REG_CASE(OP2, 1, VAL); \ + READ_WB_REG_CASE(OP2, 2, VAL); \ + READ_WB_REG_CASE(OP2, 3, VAL); \ + READ_WB_REG_CASE(OP2, 4, VAL); \ + READ_WB_REG_CASE(OP2, 5, VAL); \ + READ_WB_REG_CASE(OP2, 6, VAL); \ + READ_WB_REG_CASE(OP2, 7, VAL); \ + READ_WB_REG_CASE(OP2, 8, VAL); \ + READ_WB_REG_CASE(OP2, 9, VAL); \ + READ_WB_REG_CASE(OP2, 10, VAL); \ + READ_WB_REG_CASE(OP2, 11, VAL); \ + READ_WB_REG_CASE(OP2, 12, VAL); \ + READ_WB_REG_CASE(OP2, 13, VAL); \ + READ_WB_REG_CASE(OP2, 14, VAL); \ + READ_WB_REG_CASE(OP2, 15, VAL) + +#define GEN_WRITE_WB_REG_CASES(OP2, VAL) \ + WRITE_WB_REG_CASE(OP2, 0, VAL); \ + WRITE_WB_REG_CASE(OP2, 1, VAL); \ + WRITE_WB_REG_CASE(OP2, 2, VAL); \ + WRITE_WB_REG_CASE(OP2, 3, VAL); \ + WRITE_WB_REG_CASE(OP2, 4, VAL); \ + WRITE_WB_REG_CASE(OP2, 5, VAL); \ + WRITE_WB_REG_CASE(OP2, 6, VAL); \ + WRITE_WB_REG_CASE(OP2, 7, VAL); \ + WRITE_WB_REG_CASE(OP2, 8, VAL); \ + WRITE_WB_REG_CASE(OP2, 9, VAL); \ + WRITE_WB_REG_CASE(OP2, 10, VAL); \ + WRITE_WB_REG_CASE(OP2, 11, VAL); \ + WRITE_WB_REG_CASE(OP2, 12, VAL); \ + WRITE_WB_REG_CASE(OP2, 13, VAL); \ + WRITE_WB_REG_CASE(OP2, 14, VAL); \ + WRITE_WB_REG_CASE(OP2, 15, VAL) + +static u32 read_wb_reg(int n) +{ + u32 val = 0; + + switch (n) { + GEN_READ_WB_REG_CASES(ARM_OP2_BVR, val); + GEN_READ_WB_REG_CASES(ARM_OP2_BCR, val); + GEN_READ_WB_REG_CASES(ARM_OP2_WVR, val); + GEN_READ_WB_REG_CASES(ARM_OP2_WCR, val); + default: + pr_warning("attempt to read from unknown breakpoint " + "register %d\n", n); + } + + return val; +} + +static void write_wb_reg(int n, u32 val) +{ + switch (n) { + GEN_WRITE_WB_REG_CASES(ARM_OP2_BVR, val); + GEN_WRITE_WB_REG_CASES(ARM_OP2_BCR, val); + GEN_WRITE_WB_REG_CASES(ARM_OP2_WVR, val); + GEN_WRITE_WB_REG_CASES(ARM_OP2_WCR, val); + default: + pr_warning("attempt to write to unknown breakpoint " + "register %d\n", n); + } + isb(); +} + +/* + * In order to access the breakpoint/watchpoint control registers, + * we must be running in debug monitor mode. Unfortunately, we can + * be put into halting debug mode at any time by an external debugger + * but there is nothing we can do to prevent that. + */ +static int enable_monitor_mode(void) +{ + u32 dscr; + int ret = 0; + + ARM_DBG_READ(c1, 0, dscr); + + /* Ensure that halting mode is disabled. */ + if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, "halting debug mode enabled." + "Unable to access hardware resources.")) { + ret = -EPERM; + goto out; + } + + /* Write to the corresponding DSCR. */ + switch (debug_arch) { + case ARM_DEBUG_ARCH_V6: + case ARM_DEBUG_ARCH_V6_1: + ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); + break; + case ARM_DEBUG_ARCH_V7_ECP14: + ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN)); + break; + default: + ret = -ENODEV; + goto out; + } + + /* Check that the write made it through. */ + ARM_DBG_READ(c1, 0, dscr); + if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN), + "failed to enable monitor mode.")) { + ret = -EPERM; + } + +out: + return ret; +} + +/* + * Check if 8-bit byte-address select is available. + * This clobbers WRP 0. + */ +static u8 get_max_wp_len(void) +{ + u32 ctrl_reg; + struct arch_hw_breakpoint_ctrl ctrl; + u8 size = 4; + + if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14) + goto out; + + if (enable_monitor_mode()) + goto out; + + memset(&ctrl, 0, sizeof(ctrl)); + ctrl.len = ARM_BREAKPOINT_LEN_8; + ctrl_reg = encode_ctrl_reg(ctrl); + + write_wb_reg(ARM_BASE_WVR, 0); + write_wb_reg(ARM_BASE_WCR, ctrl_reg); + if ((read_wb_reg(ARM_BASE_WCR) & ctrl_reg) == ctrl_reg) + size = 8; + +out: + return size; +} + +u8 arch_get_max_wp_len(void) +{ + return max_watchpoint_len; +} + +/* + * Handler for reactivating a suspended watchpoint when the single + * step `mismatch' breakpoint is triggered. + */ +static void wp_single_step_handler(struct perf_event *bp, int unused, + struct perf_sample_data *data, + struct pt_regs *regs) +{ + perf_event_enable(counter_arch_bp(bp)->suspended_wp); + unregister_hw_breakpoint(bp); +} + +static int bp_is_single_step(struct perf_event *bp) +{ + return bp->overflow_handler == wp_single_step_handler; +} + +/* + * Install a perf counter breakpoint. + */ +int arch_install_hw_breakpoint(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + struct perf_event **slot, **slots; + int i, max_slots, ctrl_base, val_base, ret = 0; + + /* Ensure that we are in monitor mode and halting mode is disabled. */ + ret = enable_monitor_mode(); + if (ret) + goto out; + + if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { + /* Breakpoint */ + ctrl_base = ARM_BASE_BCR; + val_base = ARM_BASE_BVR; + slots = __get_cpu_var(bp_on_reg); + max_slots = core_num_brps - 1; + + if (bp_is_single_step(bp)) { + info->ctrl.mismatch = 1; + i = max_slots; + slots[i] = bp; + goto setup; + } + } else { + /* Watchpoint */ + ctrl_base = ARM_BASE_WCR; + val_base = ARM_BASE_WVR; + slots = __get_cpu_var(wp_on_reg); + max_slots = core_num_wrps; + } + + for (i = 0; i < max_slots; ++i) { + slot = &slots[i]; + + if (!*slot) { + *slot = bp; + break; + } + } + + if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) { + ret = -EBUSY; + goto out; + } + +setup: + /* Setup the address register. */ + write_wb_reg(val_base + i, info->address); + + /* Setup the control register. */ + write_wb_reg(ctrl_base + i, encode_ctrl_reg(info->ctrl) | 0x1); + +out: + return ret; +} + +void arch_uninstall_hw_breakpoint(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + struct perf_event **slot, **slots; + int i, max_slots, base; + + if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { + /* Breakpoint */ + base = ARM_BASE_BCR; + slots = __get_cpu_var(bp_on_reg); + max_slots = core_num_brps - 1; + + if (bp_is_single_step(bp)) { + i = max_slots; + slots[i] = NULL; + goto reset; + } + } else { + /* Watchpoint */ + base = ARM_BASE_WCR; + slots = __get_cpu_var(wp_on_reg); + max_slots = core_num_wrps; + } + + /* Remove the breakpoint. */ + for (i = 0; i < max_slots; ++i) { + slot = &slots[i]; + + if (*slot == bp) { + *slot = NULL; + break; + } + } + + if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) + return; + +reset: + /* Reset the control register. */ + write_wb_reg(base + i, 0); +} + +static int get_hbp_len(u8 hbp_len) +{ + unsigned int len_in_bytes = 0; + + switch (hbp_len) { + case ARM_BREAKPOINT_LEN_1: + len_in_bytes = 1; + break; + case ARM_BREAKPOINT_LEN_2: + len_in_bytes = 2; + break; + case ARM_BREAKPOINT_LEN_4: + len_in_bytes = 4; + break; + case ARM_BREAKPOINT_LEN_8: + len_in_bytes = 8; + break; + } + + return len_in_bytes; +} + +/* + * Check whether bp virtual address is in kernel space. + */ +int arch_check_bp_in_kernelspace(struct perf_event *bp) +{ + unsigned int len; + unsigned long va; + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + + va = info->address; + len = get_hbp_len(info->ctrl.len); + + return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE); +} + +/* + * Extract generic type and length encodings from an arch_hw_breakpoint_ctrl. + * Hopefully this will disappear when ptrace can bypass the conversion + * to generic breakpoint descriptions. + */ +int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl, + int *gen_len, int *gen_type) +{ + /* Type */ + switch (ctrl.type) { + case ARM_BREAKPOINT_EXECUTE: + *gen_type = HW_BREAKPOINT_X; + break; + case ARM_BREAKPOINT_LOAD: + *gen_type = HW_BREAKPOINT_R; + break; + case ARM_BREAKPOINT_STORE: + *gen_type = HW_BREAKPOINT_W; + break; + case ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE: + *gen_type = HW_BREAKPOINT_RW; + break; + default: + return -EINVAL; + } + + /* Len */ + switch (ctrl.len) { + case ARM_BREAKPOINT_LEN_1: + *gen_len = HW_BREAKPOINT_LEN_1; + break; + case ARM_BREAKPOINT_LEN_2: + *gen_len = HW_BREAKPOINT_LEN_2; + break; + case ARM_BREAKPOINT_LEN_4: + *gen_len = HW_BREAKPOINT_LEN_4; + break; + case ARM_BREAKPOINT_LEN_8: + *gen_len = HW_BREAKPOINT_LEN_8; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* + * Construct an arch_hw_breakpoint from a perf_event. + */ +static int arch_build_bp_info(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + + /* Type */ + switch (bp->attr.bp_type) { + case HW_BREAKPOINT_X: + info->ctrl.type = ARM_BREAKPOINT_EXECUTE; + break; + case HW_BREAKPOINT_R: + info->ctrl.type = ARM_BREAKPOINT_LOAD; + break; + case HW_BREAKPOINT_W: + info->ctrl.type = ARM_BREAKPOINT_STORE; + break; + case HW_BREAKPOINT_RW: + info->ctrl.type = ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE; + break; + default: + return -EINVAL; + } + + /* Len */ + switch (bp->attr.bp_len) { + case HW_BREAKPOINT_LEN_1: + info->ctrl.len = ARM_BREAKPOINT_LEN_1; + break; + case HW_BREAKPOINT_LEN_2: + info->ctrl.len = ARM_BREAKPOINT_LEN_2; + break; + case HW_BREAKPOINT_LEN_4: + info->ctrl.len = ARM_BREAKPOINT_LEN_4; + break; + case HW_BREAKPOINT_LEN_8: + info->ctrl.len = ARM_BREAKPOINT_LEN_8; + if ((info->ctrl.type != ARM_BREAKPOINT_EXECUTE) + && max_watchpoint_len >= 8) + break; + default: + return -EINVAL; + } + + /* Address */ + info->address = bp->attr.bp_addr; + + /* Privilege */ + info->ctrl.privilege = ARM_BREAKPOINT_USER; + if (arch_check_bp_in_kernelspace(bp) && !bp_is_single_step(bp)) + info->ctrl.privilege |= ARM_BREAKPOINT_PRIV; + + /* Enabled? */ + info->ctrl.enabled = !bp->attr.disabled; + + /* Mismatch */ + info->ctrl.mismatch = 0; + + return 0; +} + +/* + * Validate the arch-specific HW Breakpoint register settings. + */ +int arch_validate_hwbkpt_settings(struct perf_event *bp) +{ + struct arch_hw_breakpoint *info = counter_arch_bp(bp); + int ret = 0; + u32 bytelen, max_len, offset, alignment_mask = 0x3; + + /* Build the arch_hw_breakpoint. */ + ret = arch_build_bp_info(bp); + if (ret) + goto out; + + /* Check address alignment. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_8) + alignment_mask = 0x7; + if (info->address & alignment_mask) { + /* + * Try to fix the alignment. This may result in a length + * that is too large, so we must check for that. + */ + bytelen = get_hbp_len(info->ctrl.len); + max_len = info->ctrl.type == ARM_BREAKPOINT_EXECUTE ? 4 : + max_watchpoint_len; + + if (max_len >= 8) + offset = info->address & 0x7; + else + offset = info->address & 0x3; + + if (bytelen > (1 << ((max_len - (offset + 1)) >> 1))) { + ret = -EFBIG; + goto out; + } + + info->ctrl.len <<= offset; + info->address &= ~offset; + + pr_debug("breakpoint alignment fixup: length = 0x%x, " + "address = 0x%x\n", info->ctrl.len, info->address); + } + + /* + * Currently we rely on an overflow handler to take + * care of single-stepping the breakpoint when it fires. + * In the case of userspace breakpoints on a core with V7 debug, + * we can use the mismatch feature as a poor-man's hardware single-step. + */ + if (WARN_ONCE(!bp->overflow_handler && + (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_bps()), + "overflow handler required but none found")) { + ret = -EINVAL; + goto out; + } +out: + return ret; +} + +static void update_mismatch_flag(int idx, int flag) +{ + struct perf_event *bp = __get_cpu_var(bp_on_reg[idx]); + struct arch_hw_breakpoint *info; + + if (bp == NULL) + return; + + info = counter_arch_bp(bp); + + /* Update the mismatch field to enter/exit `single-step' mode */ + if (!bp->overflow_handler && info->ctrl.mismatch != flag) { + info->ctrl.mismatch = flag; + write_wb_reg(ARM_BASE_BCR + idx, encode_ctrl_reg(info->ctrl) | 0x1); + } +} + +static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) +{ + int i; + struct perf_event *bp, **slots = __get_cpu_var(wp_on_reg); + struct arch_hw_breakpoint *info; + struct perf_event_attr attr; + + /* Without a disassembler, we can only handle 1 watchpoint. */ + BUG_ON(core_num_wrps > 1); + + hw_breakpoint_init(&attr); + attr.bp_addr = regs->ARM_pc & ~0x3; + attr.bp_len = HW_BREAKPOINT_LEN_4; + attr.bp_type = HW_BREAKPOINT_X; + + for (i = 0; i < core_num_wrps; ++i) { + rcu_read_lock(); + + if (slots[i] == NULL) { + rcu_read_unlock(); + continue; + } + + /* + * The DFAR is an unknown value. Since we only allow a + * single watchpoint, we can set the trigger to the lowest + * possible faulting address. + */ + info = counter_arch_bp(slots[i]); + info->trigger = slots[i]->attr.bp_addr; + pr_debug("watchpoint fired: address = 0x%x\n", info->trigger); + perf_bp_event(slots[i], regs); + + /* + * If no overflow handler is present, insert a temporary + * mismatch breakpoint so we can single-step over the + * watchpoint trigger. + */ + if (!slots[i]->overflow_handler) { + bp = register_user_hw_breakpoint(&attr, + wp_single_step_handler, + current); + counter_arch_bp(bp)->suspended_wp = slots[i]; + perf_event_disable(slots[i]); + } + + rcu_read_unlock(); + } +} + +static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs) +{ + int i; + int mismatch; + u32 ctrl_reg, val, addr; + struct perf_event *bp, **slots = __get_cpu_var(bp_on_reg); + struct arch_hw_breakpoint *info; + struct arch_hw_breakpoint_ctrl ctrl; + + /* The exception entry code places the amended lr in the PC. */ + addr = regs->ARM_pc; + + for (i = 0; i < core_num_brps; ++i) { + rcu_read_lock(); + + bp = slots[i]; + + if (bp == NULL) { + rcu_read_unlock(); + continue; + } + + mismatch = 0; + + /* Check if the breakpoint value matches. */ + val = read_wb_reg(ARM_BASE_BVR + i); + if (val != (addr & ~0x3)) + goto unlock; + + /* Possible match, check the byte address select to confirm. */ + ctrl_reg = read_wb_reg(ARM_BASE_BCR + i); + decode_ctrl_reg(ctrl_reg, &ctrl); + if ((1 << (addr & 0x3)) & ctrl.len) { + mismatch = 1; + info = counter_arch_bp(bp); + info->trigger = addr; + } + +unlock: + if ((mismatch && !info->ctrl.mismatch) || bp_is_single_step(bp)) { + pr_debug("breakpoint fired: address = 0x%x\n", addr); + perf_bp_event(bp, regs); + } + + update_mismatch_flag(i, mismatch); + rcu_read_unlock(); + } +} + +/* + * Called from either the Data Abort Handler [watchpoint] or the + * Prefetch Abort Handler [breakpoint]. + */ +static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + int ret = 1; /* Unhandled fault. */ + u32 dscr; + + /* We only handle watchpoints and hardware breakpoints. */ + ARM_DBG_READ(c1, 0, dscr); + + /* Perform perf callbacks. */ + switch (ARM_DSCR_MOE(dscr)) { + case ARM_ENTRY_BREAKPOINT: + breakpoint_handler(addr, regs); + break; + case ARM_ENTRY_ASYNC_WATCHPOINT: + WARN_ON("Asynchronous watchpoint exception taken. " + "Debugging results may be unreliable"); + case ARM_ENTRY_SYNC_WATCHPOINT: + watchpoint_handler(addr, regs); + break; + default: + goto out; + } + + ret = 0; +out: + return ret; +} + +/* + * One-time initialisation. + */ +static void __init reset_ctrl_regs(void *unused) +{ + int i; + + if (enable_monitor_mode()) + return; + + for (i = 0; i < core_num_brps; ++i) { + write_wb_reg(ARM_BASE_BCR + i, 0UL); + write_wb_reg(ARM_BASE_BVR + i, 0UL); + } + + for (i = 0; i < core_num_wrps; ++i) { + write_wb_reg(ARM_BASE_WCR + i, 0UL); + write_wb_reg(ARM_BASE_WVR + i, 0UL); + } +} + +static int __init arch_hw_breakpoint_init(void) +{ + int ret = 0; + u32 dscr; + + debug_arch = get_debug_arch(); + + if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) { + pr_info("debug architecture 0x%x unsupported.\n", debug_arch); + ret = -ENODEV; + goto out; + } + + /* Determine how many BRPs/WRPs are available. */ + core_num_brps = get_num_brps(); + core_num_wrps = get_num_wrps(); + + pr_info("found %d breakpoint and %d watchpoint registers.\n", + core_num_brps, core_num_wrps); + + if (core_has_mismatch_bps()) + pr_info("1 breakpoint reserved for watchpoint single-step.\n"); + + ARM_DBG_READ(c1, 0, dscr); + if (dscr & ARM_DSCR_HDBGEN) { + pr_warning("halting debug mode enabled. Assuming maximum " + "watchpoint size of 4 bytes."); + } else { + /* Work out the maximum supported watchpoint length. */ + max_watchpoint_len = get_max_wp_len(); + pr_info("maximum watchpoint size is %u bytes.\n", + max_watchpoint_len); + + /* + * Reset the breakpoint resources. We assume that a halting + * debugger will leave the world in a nice state for us. + */ + smp_call_function(reset_ctrl_regs, NULL, 1); + reset_ctrl_regs(NULL); + } + + /* Register debug fault handler. */ + hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, + "watchpoint debug exception"); + hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, + "breakpoint debug exception"); + +out: + return ret; +} +arch_initcall(arch_hw_breakpoint_init); + +void hw_breakpoint_pmu_read(struct perf_event *bp) +{ +} + +/* + * Dummy function to register with die_notifier. + */ +int hw_breakpoint_exceptions_notify(struct notifier_block *unused, + unsigned long val, void *data) +{ + return NOTIFY_DONE; +} diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 8bccbfa693ff..2c1f0050c9c4 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -1162,11 +1162,12 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) { /* * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx - * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx + * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx * ALU op with S bit and Rd == 15 : * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */ - if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */ + if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */ + (insn & 0x0ff00000) == 0x03400000 || /* Undef */ (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */ return INSN_REJECTED; @@ -1177,7 +1178,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) * *S (bit 20) updates condition codes * ADC/SBC/RSC reads the C flag */ - insn &= 0xfff00fff; /* Rn = r0, Rd = r0 */ + insn &= 0xffff0fff; /* Rd = r0 */ asi->insn[0] = insn; asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_imm_rwflags : emulate_alu_imm_rflags; diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 6b4605893f1e..d9bd786ce23d 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -69,20 +69,31 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, { #ifdef CONFIG_ARM_UNWIND Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + struct arm_unwind_mapping *maps = mod->arch.map; for (s = sechdrs; s < sechdrs_end; s++) { - if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0) - mod->arch.unw_sec_init = s; - else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0) - mod->arch.unw_sec_devinit = s; - else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0) - mod->arch.unw_sec_core = s; - else if (strcmp(".init.text", secstrings + s->sh_name) == 0) - mod->arch.sec_init_text = s; - else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0) - mod->arch.sec_devinit_text = s; - else if (strcmp(".text", secstrings + s->sh_name) == 0) - mod->arch.sec_core_text = s; + char const *secname = secstrings + s->sh_name; + + if (strcmp(".ARM.exidx.init.text", secname) == 0) + maps[ARM_SEC_INIT].unw_sec = s; + else if (strcmp(".ARM.exidx.devinit.text", secname) == 0) + maps[ARM_SEC_DEVINIT].unw_sec = s; + else if (strcmp(".ARM.exidx", secname) == 0) + maps[ARM_SEC_CORE].unw_sec = s; + else if (strcmp(".ARM.exidx.exit.text", secname) == 0) + maps[ARM_SEC_EXIT].unw_sec = s; + else if (strcmp(".ARM.exidx.devexit.text", secname) == 0) + maps[ARM_SEC_DEVEXIT].unw_sec = s; + else if (strcmp(".init.text", secname) == 0) + maps[ARM_SEC_INIT].sec_text = s; + else if (strcmp(".devinit.text", secname) == 0) + maps[ARM_SEC_DEVINIT].sec_text = s; + else if (strcmp(".text", secname) == 0) + maps[ARM_SEC_CORE].sec_text = s; + else if (strcmp(".exit.text", secname) == 0) + maps[ARM_SEC_EXIT].sec_text = s; + else if (strcmp(".devexit.text", secname) == 0) + maps[ARM_SEC_DEVEXIT].sec_text = s; } #endif return 0; @@ -292,31 +303,22 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, #ifdef CONFIG_ARM_UNWIND static void register_unwind_tables(struct module *mod) { - if (mod->arch.unw_sec_init && mod->arch.sec_init_text) - mod->arch.unwind_init = - unwind_table_add(mod->arch.unw_sec_init->sh_addr, - mod->arch.unw_sec_init->sh_size, - mod->arch.sec_init_text->sh_addr, - mod->arch.sec_init_text->sh_size); - if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text) - mod->arch.unwind_devinit = - unwind_table_add(mod->arch.unw_sec_devinit->sh_addr, - mod->arch.unw_sec_devinit->sh_size, - mod->arch.sec_devinit_text->sh_addr, - mod->arch.sec_devinit_text->sh_size); - if (mod->arch.unw_sec_core && mod->arch.sec_core_text) - mod->arch.unwind_core = - unwind_table_add(mod->arch.unw_sec_core->sh_addr, - mod->arch.unw_sec_core->sh_size, - mod->arch.sec_core_text->sh_addr, - mod->arch.sec_core_text->sh_size); + int i; + for (i = 0; i < ARM_SEC_MAX; ++i) { + struct arm_unwind_mapping *map = &mod->arch.map[i]; + if (map->unw_sec && map->sec_text) + map->unwind = unwind_table_add(map->unw_sec->sh_addr, + map->unw_sec->sh_size, + map->sec_text->sh_addr, + map->sec_text->sh_size); + } } static void unregister_unwind_tables(struct module *mod) { - unwind_table_del(mod->arch.unwind_init); - unwind_table_del(mod->arch.unwind_devinit); - unwind_table_del(mod->arch.unwind_core); + int i = ARM_SEC_MAX; + while (--i >= 0) + unwind_table_del(mod->arch.map[i].unwind); } #else static inline void register_unwind_tables(struct module *mod) { } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 401e38be1f78..e76fcaadce03 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -29,6 +29,7 @@ #include <linux/utsname.h> #include <linux/uaccess.h> #include <linux/random.h> +#include <linux/hw_breakpoint.h> #include <asm/cacheflush.h> #include <asm/leds.h> @@ -135,6 +136,25 @@ EXPORT_SYMBOL(pm_power_off); void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart; EXPORT_SYMBOL_GPL(arm_pm_restart); +static void do_nothing(void *unused) +{ +} + +/* + * cpu_idle_wait - Used to ensure that all the CPUs discard old value of + * pm_idle and update to new pm_idle value. Required while changing pm_idle + * handler on SMP systems. + * + * Caller must have changed pm_idle to the new value before the call. Old + * pm_idle value will not be used by any CPU after the return of this function. + */ +void cpu_idle_wait(void) +{ + smp_mb(); + /* kick all the CPUs so that they exit out of pm_idle */ + smp_call_function(do_nothing, NULL, 1); +} +EXPORT_SYMBOL_GPL(cpu_idle_wait); /* * This is our default idle handler. We need to disable @@ -317,6 +337,8 @@ void flush_thread(void) struct thread_info *thread = current_thread_info(); struct task_struct *tsk = current; + flush_ptrace_hw_breakpoint(tsk); + memset(thread->used_cp, 0, sizeof(thread->used_cp)); memset(&tsk->thread.debug, 0, sizeof(struct debug_info)); memset(&thread->fpstate, 0, sizeof(union fp_state)); @@ -345,6 +367,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, thread->cpu_context.sp = (unsigned long)childregs; thread->cpu_context.pc = (unsigned long)ret_from_fork; + clear_ptrace_hw_breakpoint(p); + if (clone_flags & CLONE_SETTLS) thread->tp_value = regs->ARM_r3; @@ -458,3 +482,24 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) unsigned long range_end = mm->brk + 0x02000000; return randomize_range(mm->brk, range_end, 0) ? : mm->brk; } + +/* + * The vectors page is always readable from user space for the + * atomic helpers and the signal restart code. Let's declare a mapping + * for it so it is visible through ptrace and /proc/<pid>/mem. + */ + +int vectors_user_mapping(void) +{ + struct mm_struct *mm = current->mm; + return install_special_mapping(mm, 0xffff0000, PAGE_SIZE, + VM_READ | VM_EXEC | + VM_MAYREAD | VM_MAYEXEC | + VM_ALWAYSDUMP | VM_RESERVED, + NULL); +} + +const char *arch_vma_name(struct vm_area_struct *vma) +{ + return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL; +} diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index f99d489822d5..e0cb6370ed14 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -19,6 +19,8 @@ #include <linux/init.h> #include <linux/signal.h> #include <linux/uaccess.h> +#include <linux/perf_event.h> +#include <linux/hw_breakpoint.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -847,6 +849,232 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data) } #endif +#ifdef CONFIG_HAVE_HW_BREAKPOINT +/* + * Convert a virtual register number into an index for a thread_info + * breakpoint array. Breakpoints are identified using positive numbers + * whilst watchpoints are negative. The registers are laid out as pairs + * of (address, control), each pair mapping to a unique hw_breakpoint struct. + * Register 0 is reserved for describing resource information. + */ +static int ptrace_hbp_num_to_idx(long num) +{ + if (num < 0) + num = (ARM_MAX_BRP << 1) - num; + return (num - 1) >> 1; +} + +/* + * Returns the virtual register number for the address of the + * breakpoint at index idx. + */ +static long ptrace_hbp_idx_to_num(int idx) +{ + long mid = ARM_MAX_BRP << 1; + long num = (idx << 1) + 1; + return num > mid ? mid - num : num; +} + +/* + * Handle hitting a HW-breakpoint. + */ +static void ptrace_hbptriggered(struct perf_event *bp, int unused, + struct perf_sample_data *data, + struct pt_regs *regs) +{ + struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp); + long num; + int i; + siginfo_t info; + + for (i = 0; i < ARM_MAX_HBP_SLOTS; ++i) + if (current->thread.debug.hbp[i] == bp) + break; + + num = (i == ARM_MAX_HBP_SLOTS) ? 0 : ptrace_hbp_idx_to_num(i); + + info.si_signo = SIGTRAP; + info.si_errno = (int)num; + info.si_code = TRAP_HWBKPT; + info.si_addr = (void __user *)(bkpt->trigger); + + force_sig_info(SIGTRAP, &info, current); +} + +/* + * Set ptrace breakpoint pointers to zero for this task. + * This is required in order to prevent child processes from unregistering + * breakpoints held by their parent. + */ +void clear_ptrace_hw_breakpoint(struct task_struct *tsk) +{ + memset(tsk->thread.debug.hbp, 0, sizeof(tsk->thread.debug.hbp)); +} + +/* + * Unregister breakpoints from this task and reset the pointers in + * the thread_struct. + */ +void flush_ptrace_hw_breakpoint(struct task_struct *tsk) +{ + int i; + struct thread_struct *t = &tsk->thread; + + for (i = 0; i < ARM_MAX_HBP_SLOTS; i++) { + if (t->debug.hbp[i]) { + unregister_hw_breakpoint(t->debug.hbp[i]); + t->debug.hbp[i] = NULL; + } + } +} + +static u32 ptrace_get_hbp_resource_info(void) +{ + u8 num_brps, num_wrps, debug_arch, wp_len; + u32 reg = 0; + + num_brps = hw_breakpoint_slots(TYPE_INST); + num_wrps = hw_breakpoint_slots(TYPE_DATA); + debug_arch = arch_get_debug_arch(); + wp_len = arch_get_max_wp_len(); + + reg |= debug_arch; + reg <<= 8; + reg |= wp_len; + reg <<= 8; + reg |= num_wrps; + reg <<= 8; + reg |= num_brps; + + return reg; +} + +static struct perf_event *ptrace_hbp_create(struct task_struct *tsk, int type) +{ + struct perf_event_attr attr; + + ptrace_breakpoint_init(&attr); + + /* Initialise fields to sane defaults. */ + attr.bp_addr = 0; + attr.bp_len = HW_BREAKPOINT_LEN_4; + attr.bp_type = type; + attr.disabled = 1; + + return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, tsk); +} + +static int ptrace_gethbpregs(struct task_struct *tsk, long num, + unsigned long __user *data) +{ + u32 reg; + int idx, ret = 0; + struct perf_event *bp; + struct arch_hw_breakpoint_ctrl arch_ctrl; + + if (num == 0) { + reg = ptrace_get_hbp_resource_info(); + } else { + idx = ptrace_hbp_num_to_idx(num); + if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) { + ret = -EINVAL; + goto out; + } + + bp = tsk->thread.debug.hbp[idx]; + if (!bp) { + reg = 0; + goto put; + } + + arch_ctrl = counter_arch_bp(bp)->ctrl; + + /* + * Fix up the len because we may have adjusted it + * to compensate for an unaligned address. + */ + while (!(arch_ctrl.len & 0x1)) + arch_ctrl.len >>= 1; + + if (idx & 0x1) + reg = encode_ctrl_reg(arch_ctrl); + else + reg = bp->attr.bp_addr; + } + +put: + if (put_user(reg, data)) + ret = -EFAULT; + +out: + return ret; +} + +static int ptrace_sethbpregs(struct task_struct *tsk, long num, + unsigned long __user *data) +{ + int idx, gen_len, gen_type, implied_type, ret = 0; + u32 user_val; + struct perf_event *bp; + struct arch_hw_breakpoint_ctrl ctrl; + struct perf_event_attr attr; + + if (num == 0) + goto out; + else if (num < 0) + implied_type = HW_BREAKPOINT_RW; + else + implied_type = HW_BREAKPOINT_X; + + idx = ptrace_hbp_num_to_idx(num); + if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) { + ret = -EINVAL; + goto out; + } + + if (get_user(user_val, data)) { + ret = -EFAULT; + goto out; + } + + bp = tsk->thread.debug.hbp[idx]; + if (!bp) { + bp = ptrace_hbp_create(tsk, implied_type); + if (IS_ERR(bp)) { + ret = PTR_ERR(bp); + goto out; + } + tsk->thread.debug.hbp[idx] = bp; + } + + attr = bp->attr; + + if (num & 0x1) { + /* Address */ + attr.bp_addr = user_val; + } else { + /* Control */ + decode_ctrl_reg(user_val, &ctrl); + ret = arch_bp_generic_fields(ctrl, &gen_len, &gen_type); + if (ret) + goto out; + + if ((gen_type & implied_type) != gen_type) { + ret = -EINVAL; + goto out; + } + + attr.bp_len = gen_len; + attr.bp_type = gen_type; + attr.disabled = !ctrl.enabled; + } + + ret = modify_user_hw_breakpoint(bp, &attr); +out: + return ret; +} +#endif + long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; @@ -916,6 +1144,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; #endif +#ifdef CONFIG_HAVE_HW_BREAKPOINT + case PTRACE_GETHBPREGS: + ret = ptrace_gethbpregs(child, addr, + (unsigned long __user *)data); + break; + case PTRACE_SETHBPREGS: + ret = ptrace_sethbpregs(child, addr, + (unsigned long __user *)data); + break; +#endif + default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d5231ae7355a..4572cf8663b2 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -36,6 +36,7 @@ #include <asm/procinfo.h> #include <asm/sections.h> #include <asm/setup.h> +#include <asm/smp_plat.h> #include <asm/mach-types.h> #include <asm/cacheflush.h> #include <asm/cachetype.h> @@ -238,6 +239,34 @@ int cpu_architecture(void) return cpu_arch; } +static int cpu_has_aliasing_icache(unsigned int arch) +{ + int aliasing_icache; + unsigned int id_reg, num_sets, line_size; + + /* arch specifies the register format */ + switch (arch) { + case CPU_ARCH_ARMv7: + asm("mcr p15, 2, %1, c0, c0, 0 @ set CSSELR\n" + "isb\n" + "mrc p15, 1, %0, c0, c0, 0 @ read CCSIDR" + : "=r" (id_reg) + : "r" (1)); + line_size = 4 << ((id_reg & 0x7) + 2); + num_sets = ((id_reg >> 13) & 0x7fff) + 1; + aliasing_icache = (line_size * num_sets) > PAGE_SIZE; + break; + case CPU_ARCH_ARMv6: + aliasing_icache = read_cpuid_cachetype() & (1 << 11); + break; + default: + /* I-cache aliases will be handled by D-cache aliasing code */ + aliasing_icache = 0; + } + + return aliasing_icache; +} + static void __init cacheid_init(void) { unsigned int cachetype = read_cpuid_cachetype(); @@ -249,10 +278,15 @@ static void __init cacheid_init(void) cacheid = CACHEID_VIPT_NONALIASING; if ((cachetype & (3 << 14)) == 1 << 14) cacheid |= CACHEID_ASID_TAGGED; - } else if (cachetype & (1 << 23)) + else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7)) + cacheid |= CACHEID_VIPT_I_ALIASING; + } else if (cachetype & (1 << 23)) { cacheid = CACHEID_VIPT_ALIASING; - else + } else { cacheid = CACHEID_VIPT_NONALIASING; + if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6)) + cacheid |= CACHEID_VIPT_I_ALIASING; + } } else { cacheid = CACHEID_VIVT; } @@ -263,7 +297,7 @@ static void __init cacheid_init(void) cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown", cache_is_vivt() ? "VIVT" : icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" : - cache_is_vipt_aliasing() ? "VIPT aliasing" : + icache_is_vipt_aliasing() ? "VIPT aliasing" : cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown"); } @@ -490,7 +524,7 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc) kernel_code.start = virt_to_phys(_text); kernel_code.end = virt_to_phys(_etext - 1); - kernel_data.start = virt_to_phys(_data); + kernel_data.start = virt_to_phys(_sdata); kernel_data.end = virt_to_phys(_end - 1); for (i = 0; i < mi->nr_banks; i++) { @@ -825,7 +859,8 @@ void __init setup_arch(char **cmdline_p) request_standard_resources(&meminfo, mdesc); #ifdef CONFIG_SMP - smp_init_cpus(); + if (is_smp()) + smp_init_cpus(); #endif reserve_crashkernel(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 40dc74f2b27f..8c1959590252 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -33,6 +33,7 @@ #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/processor.h> +#include <asm/sections.h> #include <asm/tlbflush.h> #include <asm/ptrace.h> #include <asm/localtimer.h> @@ -67,12 +68,47 @@ enum ipi_msg_type { IPI_CPU_STOP, }; +static inline void identity_mapping_add(pgd_t *pgd, unsigned long start, + unsigned long end) +{ + unsigned long addr, prot; + pmd_t *pmd; + + prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE; + if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) + prot |= PMD_BIT4; + + for (addr = start & PGDIR_MASK; addr < end;) { + pmd = pmd_offset(pgd + pgd_index(addr), addr); + pmd[0] = __pmd(addr | prot); + addr += SECTION_SIZE; + pmd[1] = __pmd(addr | prot); + addr += SECTION_SIZE; + flush_pmd_entry(pmd); + outer_clean_range(__pa(pmd), __pa(pmd + 1)); + } +} + +static inline void identity_mapping_del(pgd_t *pgd, unsigned long start, + unsigned long end) +{ + unsigned long addr; + pmd_t *pmd; + + for (addr = start & PGDIR_MASK; addr < end; addr += PGDIR_SIZE) { + pmd = pmd_offset(pgd + pgd_index(addr), addr); + pmd[0] = __pmd(0); + pmd[1] = __pmd(0); + clean_pmd_entry(pmd); + outer_clean_range(__pa(pmd), __pa(pmd + 1)); + } +} + int __cpuinit __cpu_up(unsigned int cpu) { struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu); struct task_struct *idle = ci->idle; pgd_t *pgd; - pmd_t *pmd; int ret; /* @@ -101,11 +137,16 @@ int __cpuinit __cpu_up(unsigned int cpu) * a 1:1 mapping for the physical address of the kernel. */ pgd = pgd_alloc(&init_mm); - pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET); - *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) | - PMD_TYPE_SECT | PMD_SECT_AP_WRITE); - flush_pmd_entry(pmd); - outer_clean_range(__pa(pmd), __pa(pmd + 1)); + if (!pgd) + return -ENOMEM; + + if (PHYS_OFFSET != PAGE_OFFSET) { +#ifndef CONFIG_HOTPLUG_CPU + identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end)); +#endif + identity_mapping_add(pgd, __pa(_stext), __pa(_etext)); + identity_mapping_add(pgd, __pa(_sdata), __pa(_edata)); + } /* * We need to tell the secondary core where to find @@ -143,8 +184,14 @@ int __cpuinit __cpu_up(unsigned int cpu) secondary_data.stack = NULL; secondary_data.pgdir = 0; - *pmd = __pmd(0); - clean_pmd_entry(pmd); + if (PHYS_OFFSET != PAGE_OFFSET) { +#ifndef CONFIG_HOTPLUG_CPU + identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end)); +#endif + identity_mapping_del(pgd, __pa(_stext), __pa(_etext)); + identity_mapping_del(pgd, __pa(_sdata), __pa(_edata)); + } + pgd_free(&init_mm, pgd); if (ret) { @@ -567,7 +614,8 @@ void smp_send_stop(void) { cpumask_t mask = cpu_online_map; cpu_clear(smp_processor_id(), mask); - send_ipi_message(&mask, IPI_CPU_STOP); + if (!cpus_empty(mask)) + send_ipi_message(&mask, IPI_CPU_STOP); } /* diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index dd81a918c106..2a161765f6d5 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -146,6 +146,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr) addr < table->end_addr) { idx = search_index(addr, table->start, table->stop - 1); + /* Move-to-front to exploit common traces */ + list_move(&table->list, &unwind_tables); break; } } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b16c07914b55..1953e3d21abf 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -8,6 +8,19 @@ #include <asm/memory.h> #include <asm/page.h> +#define PROC_INFO \ + VMLINUX_SYMBOL(__proc_info_begin) = .; \ + *(.proc.info.init) \ + VMLINUX_SYMBOL(__proc_info_end) = .; + +#ifdef CONFIG_HOTPLUG_CPU +#define ARM_CPU_DISCARD(x) +#define ARM_CPU_KEEP(x) x +#else +#define ARM_CPU_DISCARD(x) x +#define ARM_CPU_KEEP(x) +#endif + OUTPUT_ARCH(arm) ENTRY(stext) @@ -31,15 +44,18 @@ SECTIONS HEAD_TEXT INIT_TEXT _einittext = .; - __proc_info_begin = .; - *(.proc.info.init) - __proc_info_end = .; + ARM_CPU_DISCARD(PROC_INFO) __arch_info_begin = .; *(.arch.info.init) __arch_info_end = .; __tagtable_begin = .; *(.taglist.init) __tagtable_end = .; +#ifdef CONFIG_SMP_ON_UP + __smpalt_begin = .; + *(.alt.smp.init) + __smpalt_end = .; +#endif INIT_SETUP(16) @@ -68,10 +84,8 @@ SECTIONS /DISCARD/ : { *(.ARM.exidx.exit.text) *(.ARM.extab.exit.text) -#ifndef CONFIG_HOTPLUG_CPU - *(.ARM.exidx.cpuexit.text) - *(.ARM.extab.cpuexit.text) -#endif + ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) + ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -100,12 +114,11 @@ SECTIONS *(.glue_7) *(.glue_7t) *(.got) /* Global offset table */ + ARM_CPU_KEEP(PROC_INFO) } RO_DATA(PAGE_SIZE) - _etext = .; /* End of text and rodata section */ - #ifdef CONFIG_ARM_UNWIND /* * Stack unwinding tables @@ -123,6 +136,8 @@ SECTIONS } #endif + _etext = .; /* End of text and rodata section */ + #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ . = PAGE_OFFSET + TEXT_OFFSET; @@ -237,6 +252,12 @@ SECTIONS /* Default discards */ DISCARDS + +#ifndef CONFIG_SMP_ON_UP + /DISCARD/ : { + *(.alt.smp.init) + } +#endif } /* diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h index 551f68f666bf..cff4e0a996ce 100644 --- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h +++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 939bccd70569..ca33862b4bf4 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -248,6 +248,12 @@ config MACH_CPU9260 Select this if you are using a Eukrea Electromatique's CPU9260 Board <http://www.eukrea.com/> +config MACH_FLEXIBITY + bool "Flexibity Connect board" + help + Select this if you are using Flexibity Connect board + <http://www.flexibity.com> + endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ca2ac003f41f..7cbe06d7cee9 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o +obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c new file mode 100644 index 000000000000..216c8ca985f4 --- /dev/null +++ b/arch/arm/mach-at91/board-flexibity.c @@ -0,0 +1,164 @@ +/* + * linux/arch/arm/mach-at91/board-flexibity.c + * + * Copyright (C) 2010 Flexibity + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/input.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/board.h> + +#include "generic.h" + +static void __init flexibity_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init flexibity_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +/* USB Host port */ +static struct at91_usbh_data __initdata flexibity_usbh_data = { + .ports = 2, +}; + +/* USB Device port */ +static struct at91_udc_data __initdata flexibity_udc_data = { + .vbus_pin = AT91_PIN_PC5, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + +/* SPI devices */ +static struct spi_board_info flexibity_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +}; + +/* MCI (SD/MMC) */ +static struct at91_mmc_data __initdata flexibity_mmc_data = { + .slot_b = 0, + .wire4 = 1, + .det_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, +}; + +/* LEDs */ +static struct gpio_led flexibity_leds[] = { + { + .name = "usb1:green", + .gpio = AT91_PIN_PA12, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb1:red", + .gpio = AT91_PIN_PA13, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:green", + .gpio = AT91_PIN_PB26, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:red", + .gpio = AT91_PIN_PB27, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:green", + .gpio = AT91_PIN_PC8, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:red", + .gpio = AT91_PIN_PC6, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:green", + .gpio = AT91_PIN_PB4, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:red", + .gpio = AT91_PIN_PB5, + .active_low = 1, + .default_trigger = "default-on", + } +}; + +static void __init flexibity_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&flexibity_usbh_data); + /* USB Device */ + at91_add_device_udc(&flexibity_udc_data); + /* SPI */ + at91_add_device_spi(flexibity_spi_devices, + ARRAY_SIZE(flexibity_spi_devices)); + /* MMC */ + at91_add_device_mmc(0, &flexibity_mmc_data); + /* LEDs */ + at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); +} + +MACHINE_START(FLEXIBITY, "Flexibity Connect") + /* Maintainer: Maxim Osipov */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = flexibity_map_io, + .init_irq = flexibity_init_irq, + .init_machine = flexibity_board_init, +MACHINE_END diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h index 35e2ead8395c..3db3a09fd398 100644 --- a/arch/arm/mach-bcmring/include/mach/vmalloc.h +++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h @@ -22,4 +22,4 @@ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles * larger physical memory designs better. */ -#define VMALLOC_END (PAGE_OFFSET + 0x30000000) +#define VMALLOC_END 0xf0000000 diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h index ea6cc7beff28..30b3a287ed88 100644 --- a/arch/arm/mach-clps711x/include/mach/vmalloc.h +++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 71f90f864748..b77b860b36d7 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -20,23 +20,23 @@ config ARCH_DAVINCI_DM644x select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM355 - bool "DaVinci 355 based system" + bool "DaVinci 355 based system" select AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DM646x - bool "DaVinci 646x based system" + bool "DaVinci 646x based system" select AINTC select ARCH_DAVINCI_DMx config ARCH_DAVINCI_DA830 - bool "DA830/OMAP-L137 based system" + bool "DA830/OMAP-L137/AM17x based system" select CP_INTC select ARCH_DAVINCI_DA8XX select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 config ARCH_DAVINCI_DA850 - bool "DA850/OMAP-L138 based system" + bool "DA850/OMAP-L138/AM18x based system" select CP_INTC select ARCH_DAVINCI_DA8XX select ARCH_HAS_CPUFREQ @@ -115,21 +115,21 @@ config MACH_DAVINCI_DM365_EVM for development is a DM365 EVM config MACH_DAVINCI_DA830_EVM - bool "TI DA830/OMAP-L137 Reference Platform" + bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 select GPIO_PCF857X help - Say Y here to select the TI DA830/OMAP-L137 Evaluation Module. + Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. choice - prompt "Select DA830/OMAP-L137 UI board peripheral" + prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" depends on MACH_DAVINCI_DA830_EVM help - The presence of UI card on the DA830/OMAP-L137 EVM is detected - automatically based on successful probe of the I2C based GPIO - expander on that board. This option selected in this menu has - an effect only in case of a successful UI card detection. + The presence of UI card on the DA830/OMAP-L137/AM17x EVM is + detected automatically based on successful probe of the I2C + based GPIO expander on that board. This option selected in this + menu has an effect only in case of a successful UI card detection. config DA830_UI_LCD bool "LCD" @@ -140,23 +140,23 @@ config DA830_UI_LCD config DA830_UI_NAND bool "NAND flash" help - Say Y here to use the NAND flash. Do not forget to setup + Say Y here to use the NAND flash. Do not forget to setup the switch correctly. endchoice config MACH_DAVINCI_DA850_EVM - bool "TI DA850/OMAP-L138 Reference Platform" + bool "TI DA850/OMAP-L138/AM18x Reference Platform" default ARCH_DAVINCI_DA850 depends on ARCH_DAVINCI_DA850 select GPIO_PCA953X help - Say Y here to select the TI DA850/OMAP-L138 Evaluation Module. + Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. choice prompt "Select peripherals connected to expander on UI board" depends on MACH_DAVINCI_DA850_EVM help - The presence of User Interface (UI) card on the DA850/OMAP-L138 + The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x EVM is detected automatically based on successful probe of the I2C based GPIO expander on that card. This option selected in this menu has an effect only in case of a successful UI card detection. @@ -165,13 +165,13 @@ config DA850_UI_NONE bool "No peripheral is enabled" help Say Y if you do not want to enable any of the peripherals connected - to TCA6416 expander on DA850/OMAP-L138 EVM UI card + to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card config DA850_UI_RMII bool "RMII Ethernet PHY" help - Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM. - This PHY is found on the UI daughter card that is supplied with + Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x + EVM. This PHY is found on the UI daughter card that is supplied with the EVM. NOTE: Please take care while choosing this option, MII PHY will not be functional if RMII mode is selected. @@ -185,6 +185,22 @@ config MACH_TNETV107X help Say Y here to select the TI TNETV107X Evaluation Module. +config MACH_MITYOMAPL138 + bool "Critical Link MityDSP-L138/MityARM-1808 SoM" + depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 + System on Module. Information on this SoM may be found at + http://www.mitydsp.com + +config MACH_OMAPL138_HAWKBOARD + bool "TI AM1808 / OMAPL-138 Hawkboard platform" + depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . + Information of this board may be found at + http://www.hawkboard.org/ + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI @@ -195,20 +211,20 @@ config DAVINCI_MUX say Y. config DAVINCI_MUX_DEBUG - bool "Multiplexing debug output" - depends on DAVINCI_MUX - help - Makes the multiplexing functions print out a lot of debug info. - This is useful if you want to find out the correct values of the - multiplexing registers. + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. config DAVINCI_MUX_WARNINGS - bool "Warn about pins the bootloader didn't set up" - depends on DAVINCI_MUX - help - Choose Y here to warn whenever driver initialization logic needs - to change the pin multiplexing setup. When there are no warnings - printed, it's safe to deselect DAVINCI_MUX for your product. + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. config DAVINCI_RESET_CLOCKS bool "Reset unused clocks during boot" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index eab4c0fd667a..0b87a1ca2bb3 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o clock.o serial.o io.o psc.o \ - gpio.o dma.o usb.o common.o sram.o + gpio.o dma.o usb.o common.o sram.o aemif.o obj-$(CONFIG_DAVINCI_MUX) += mux.o @@ -33,6 +33,8 @@ obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o obj-$(CONFIG_MACH_TNETV107X) += board-tnetv107x-evm.o +obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o +obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o # Power Management obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c new file mode 100644 index 000000000000..9c3f500fc12f --- /dev/null +++ b/arch/arm/mach-davinci/aemif.c @@ -0,0 +1,133 @@ +/* + * AEMIF support for DaVinci SoCs + * + * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/time.h> + +#include <mach/aemif.h> + +/* Timing value configuration */ + +#define TA(x) ((x) << 2) +#define RHOLD(x) ((x) << 4) +#define RSTROBE(x) ((x) << 7) +#define RSETUP(x) ((x) << 13) +#define WHOLD(x) ((x) << 17) +#define WSTROBE(x) ((x) << 20) +#define WSETUP(x) ((x) << 26) + +#define TA_MAX 0x3 +#define RHOLD_MAX 0x7 +#define RSTROBE_MAX 0x3f +#define RSETUP_MAX 0xf +#define WHOLD_MAX 0x7 +#define WSTROBE_MAX 0x3f +#define WSETUP_MAX 0xf + +#define TIMING_MASK (TA(TA_MAX) | \ + RHOLD(RHOLD_MAX) | \ + RSTROBE(RSTROBE_MAX) | \ + RSETUP(RSETUP_MAX) | \ + WHOLD(WHOLD_MAX) | \ + WSTROBE(WSTROBE_MAX) | \ + WSETUP(WSETUP_MAX)) + +/* + * aemif_calc_rate - calculate timing data. + * @wanted: The cycle time needed in nanoseconds. + * @clk: The input clock rate in kHz. + * @max: The maximum divider value that can be programmed. + * + * On success, returns the calculated timing value minus 1 for easy + * programming into AEMIF timing registers, else negative errno. + */ +static int aemif_calc_rate(int wanted, unsigned long clk, int max) +{ + int result; + + result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1; + + pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted); + + /* It is generally OK to have a more relaxed timing than requested... */ + if (result < 0) + result = 0; + + /* ... But configuring tighter timings is not an option. */ + else if (result > max) + result = -EINVAL; + + return result; +} + +/** + * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface + * @t: timing values to be progammed + * @base: The virtual base address of the AEMIF interface + * @cs: chip-select to program the timing values for + * + * This function programs the given timing values (in real clock) into the + * AEMIF registers taking the AEMIF clock into account. + * + * This function does not use any locking while programming the AEMIF + * because it is expected that there is only one user of a given + * chip-select. + * + * Returns 0 on success, else negative errno. + */ +int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, + void __iomem *base, unsigned cs) +{ + unsigned set, val; + unsigned ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup; + unsigned offset = A1CR_OFFSET + cs * 4; + struct clk *aemif_clk; + unsigned long clkrate; + + if (!t) + return 0; /* Nothing to do */ + + aemif_clk = clk_get(NULL, "aemif"); + if (IS_ERR(aemif_clk)) + return PTR_ERR(aemif_clk); + + clkrate = clk_get_rate(aemif_clk); + + clkrate /= 1000; /* turn clock into kHz for ease of use */ + + ta = aemif_calc_rate(t->ta, clkrate, TA_MAX); + rhold = aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX); + rstrobe = aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX); + rsetup = aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX); + whold = aemif_calc_rate(t->whold, clkrate, WHOLD_MAX); + wstrobe = aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX); + wsetup = aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX); + + if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 || + whold < 0 || wstrobe < 0 || wsetup < 0) { + pr_err("%s: cannot get suitable timings\n", __func__); + return -EINVAL; + } + + set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) | + WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup); + + val = __raw_readl(base + offset); + val &= ~TIMING_MASK; + val |= set; + __raw_writel(val, base + offset); + + return 0; +} +EXPORT_SYMBOL(davinci_aemif_setup_timing); diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index c3994f341e49..1bb89d3f9b1f 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -29,10 +29,9 @@ #include <mach/nand.h> #include <mach/da8xx.h> #include <mach/usb.h> +#include <mach/aemif.h> -#define DA830_EVM_PHY_MASK 0x0 -#define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ - +#define DA830_EVM_PHY_ID "" /* * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. */ @@ -360,6 +359,16 @@ static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = { .pattern = da830_evm_nand_mirror_pattern }; +static struct davinci_aemif_timing da830_evm_nandflash_timing = { + .wsetup = 24, + .wstrobe = 21, + .whold = 14, + .rsetup = 19, + .rstrobe = 50, + .rhold = 0, + .ta = 20, +}; + static struct davinci_nand_pdata da830_evm_nand_pdata = { .parts = da830_evm_nand_partitions, .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), @@ -368,6 +377,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = { .options = NAND_USE_FLASH_BBT, .bbt_td = &da830_evm_nand_bbt_main_descr, .bbt_md = &da830_evm_nand_bbt_mirror_descr, + .timing = &da830_evm_nandflash_timing, }; static struct resource da830_evm_nand_resources[] = { @@ -546,9 +556,8 @@ static __init void da830_evm_init(void) da830_evm_usb_init(); - soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; soc_info->emac_pdata->rmii_en = 1; + soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID; ret = davinci_cfg_reg_list(da830_cpgmac_pins); if (ret) @@ -586,6 +595,9 @@ static __init void da830_evm_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE static int __init da830_evm_console_init(void) { + if (!machine_is_davinci_da830_evm()) + return 0; + return add_preferred_console("ttyS", 2, "115200"); } console_initcall(da830_evm_console_init); @@ -596,7 +608,7 @@ static void __init da830_evm_map_io(void) da830_init(); } -MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM") +MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index fdc2cc500fc6..ef97c7f76de5 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -26,7 +26,6 @@ #include <linux/mtd/physmap.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> -#include <linux/mfd/tps6507x.h> #include <linux/input/tps6507x-ts.h> #include <asm/mach-types.h> @@ -36,10 +35,9 @@ #include <mach/da8xx.h> #include <mach/nand.h> #include <mach/mux.h> +#include <mach/aemif.h> -#define DA850_EVM_PHY_MASK 0x1 -#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ - +#define DA850_EVM_PHY_ID "0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) @@ -110,7 +108,7 @@ static struct platform_device da850_pm_device = { * to boot, using TI's tools to install the secondary boot loader * (UBL) and U-Boot. */ -struct mtd_partition da850_evm_nandflash_partition[] = { +static struct mtd_partition da850_evm_nandflash_partition[] = { { .name = "u-boot env", .offset = 0, @@ -143,12 +141,23 @@ struct mtd_partition da850_evm_nandflash_partition[] = { }, }; +static struct davinci_aemif_timing da850_evm_nandflash_timing = { + .wsetup = 24, + .wstrobe = 21, + .whold = 14, + .rsetup = 19, + .rstrobe = 50, + .rhold = 0, + .ta = 20, +}; + static struct davinci_nand_pdata da850_evm_nandflash_data = { .parts = da850_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, .ecc_bits = 4, .options = NAND_USE_FLASH_BBT, + .timing = &da850_evm_nandflash_timing, }; static struct resource da850_evm_nandflash_resource[] = { @@ -196,6 +205,30 @@ static void __init da850_evm_init_nor(void) iounmap(aemif_addr); } +static const short da850_evm_nand_pins[] = { + DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, + DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, + DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4, + DA850_NEMA_WE, DA850_NEMA_OE, + -1 +}; + +static const short da850_evm_nor_pins[] = { + DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2, + DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1, + DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5, + DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9, + DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13, + DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1, + DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5, + DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9, + DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13, + DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17, + DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21, + DA850_EMA_A_22, DA850_EMA_A_23, + -1 +}; + static u32 ui_card_detected; #if defined(CONFIG_MMC_DAVINCI) || \ @@ -205,17 +238,17 @@ static u32 ui_card_detected; #define HAS_MMC 0 #endif -static __init void da850_evm_setup_nor_nand(void) +static inline void da850_evm_setup_nor_nand(void) { int ret = 0; if (ui_card_detected & !HAS_MMC) { - ret = davinci_cfg_reg_list(da850_nand_pins); + ret = davinci_cfg_reg_list(da850_evm_nand_pins); if (ret) pr_warning("da850_evm_init: nand mux setup failed: " "%d\n", ret); - ret = davinci_cfg_reg_list(da850_nor_pins); + ret = davinci_cfg_reg_list(da850_evm_nor_pins); if (ret) pr_warning("da850_evm_init: nor mux setup failed: %d\n", ret); @@ -406,7 +439,7 @@ static int da850_lcd_hw_init(void) /* TPS65070 voltage regulator support */ /* 3.3V */ -struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { +static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { { .supply = "usb0_vdda33", }, @@ -416,7 +449,7 @@ struct regulator_consumer_supply tps65070_dcdc1_consumers[] = { }; /* 3.3V or 1.8V */ -struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { +static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { { .supply = "dvdd3318_a", }, @@ -429,14 +462,14 @@ struct regulator_consumer_supply tps65070_dcdc2_consumers[] = { }; /* 1.2V */ -struct regulator_consumer_supply tps65070_dcdc3_consumers[] = { +static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = { { .supply = "cvdd", }, }; /* 1.8V LDO */ -struct regulator_consumer_supply tps65070_ldo1_consumers[] = { +static struct regulator_consumer_supply tps65070_ldo1_consumers[] = { { .supply = "sata_vddr", }, @@ -452,7 +485,7 @@ struct regulator_consumer_supply tps65070_ldo1_consumers[] = { }; /* 1.2V LDO */ -struct regulator_consumer_supply tps65070_ldo2_consumers[] = { +static struct regulator_consumer_supply tps65070_ldo2_consumers[] = { { .supply = "sata_vdd", }, @@ -475,7 +508,7 @@ static struct tps6507x_reg_platform_data tps6507x_platform_data = { .defdcdc_default = true, }; -struct regulator_init_data tps65070_regulator_data[] = { +static struct regulator_init_data tps65070_regulator_data[] = { /* dcdc1 */ { .constraints = { @@ -576,6 +609,23 @@ static const short da850_evm_lcdc_pins[] = { -1 }; +static const short da850_evm_mii_pins[] = { + DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, + DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, + DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, + DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + +static const short da850_evm_rmii_pins[] = { + DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, + DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, + DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + static int __init da850_evm_config_emac(void) { void __iomem *cfg_chip3_base; @@ -593,12 +643,12 @@ static int __init da850_evm_config_emac(void) if (rmii_en) { val |= BIT(8); - ret = davinci_cfg_reg_list(da850_rmii_pins); + ret = davinci_cfg_reg_list(da850_evm_rmii_pins); pr_info("EMAC: RMII PHY configured, MII PHY will not be" " functional\n"); } else { val &= ~BIT(8); - ret = davinci_cfg_reg_list(da850_cpgmac_pins); + ret = davinci_cfg_reg_list(da850_evm_mii_pins); pr_info("EMAC: MII PHY configured, RMII PHY will not be" " functional\n"); } @@ -625,8 +675,7 @@ static int __init da850_evm_config_emac(void) /* Enable/Disable MII MDIO clock */ gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en); - soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID; ret = da8xx_register_emac(); if (ret) @@ -787,7 +836,7 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: rtc setup failed: %d\n", ret); - ret = da850_register_cpufreq(); + ret = da850_register_cpufreq("pll0_sysclk3"); if (ret) pr_warning("da850_evm_init: cpufreq registration failed: %d\n", ret); @@ -806,6 +855,9 @@ static __init void da850_evm_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE static int __init da850_evm_console_init(void) { + if (!machine_is_davinci_da850_evm()) + return 0; + return add_preferred_console("ttyS", 2, "115200"); } console_initcall(da850_evm_console_init); @@ -816,7 +868,7 @@ static void __init da850_evm_map_io(void) da850_init(); } -MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM") +MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, .boot_params = (DA8XX_DDR_BASE + 0x100), diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 84acef1d0b3d..a06b84c1b7d8 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -54,9 +54,7 @@ static inline int have_tvp7002(void) return 0; } -#define DM365_EVM_PHY_MASK (0x2) -#define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define DM365_EVM_PHY_ID "0:01" /* * A MAX-II CPLD is used for various board control functions. */ @@ -175,7 +173,9 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; -static struct snd_platform_data dm365_evm_snd_data; +static struct snd_platform_data dm365_evm_snd_data = { + .asp_chan_q = EVENTQ_3, +}; static struct i2c_board_info i2c_info[] = { { @@ -533,8 +533,7 @@ fail: /* ... and ENET ... */ dm365evm_emac_configure(); - soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID; resets &= ~BIT(3); /* ... and AIC33 */ diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 34c8b418cd72..44a2f0a59285 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -37,10 +37,9 @@ #include <mach/nand.h> #include <mach/mmc.h> #include <mach/usb.h> +#include <mach/aemif.h> -#define DM644X_EVM_PHY_MASK (0x2) -#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define DM644X_EVM_PHY_ID "0:01" #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) @@ -137,11 +136,22 @@ static struct mtd_partition davinci_evm_nandflash_partition[] = { */ }; +static struct davinci_aemif_timing davinci_evm_nandflash_timing = { + .wsetup = 20, + .wstrobe = 40, + .whold = 20, + .rsetup = 10, + .rstrobe = 40, + .rhold = 10, + .ta = 40, +}; + static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, .options = NAND_USE_FLASH_BBT, + .timing = &davinci_evm_nandflash_timing, }; static struct resource davinci_evm_nandflash_resource[] = { @@ -695,9 +705,7 @@ static __init void davinci_evm_init(void) davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_evm_snd_data); - soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; - + soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; /* Register the fixup for PHY on DaVinci */ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, davinci_phy_fixup); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 4502f346b2b0..67669bba922c 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -42,6 +42,7 @@ #include <mach/nand.h> #include <mach/clock.h> #include <mach/cdce949.h> +#include <mach/aemif.h> #include "clock.h" @@ -71,6 +72,16 @@ static struct mtd_partition davinci_nand_partitions[] = { } }; +static struct davinci_aemif_timing dm6467tevm_nandflash_timing = { + .wsetup = 29, + .wstrobe = 24, + .whold = 14, + .rsetup = 19, + .rstrobe = 33, + .rhold = 0, + .ta = 29, +}; + static struct davinci_nand_pdata davinci_nand_data = { .mask_cle = 0x80000, .mask_ale = 0x40000, @@ -718,9 +729,7 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; -#define DM646X_EVM_PHY_MASK (0x2) -#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define DM646X_EVM_PHY_ID "0:01" /* * The following EDMA channels/slots are not being used by drivers (for * example: Timer, GPIO, UART events etc) on dm646x, hence they are being @@ -763,6 +772,9 @@ static __init void evm_init(void) dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); dm646x_init_mcasp1(&dm646x_evm_snd_data[1]); + if (machine_is_davinci_dm6467tevm()) + davinci_nand_data.timing = &dm6467tevm_nandflash_timing; + platform_device_register(&davinci_nand_device); dm646x_init_edma(dm646x_edma_rsv); @@ -770,8 +782,7 @@ static __init void evm_init(void) if (HAS_ATA) davinci_init_ide(); - soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID; } #define DM646X_EVM_REF_FREQ 27000000 diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c new file mode 100644 index 000000000000..65f7501984db --- /dev/null +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -0,0 +1,424 @@ +/* + * Critical Link MityOMAP-L138 SoM + * + * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/regulator/machine.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/etherdevice.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/common.h> +#include <mach/cp_intc.h> +#include <mach/da8xx.h> +#include <mach/nand.h> +#include <mach/mux.h> + +#define MITYOMAPL138_PHY_ID "0:03" + +#define FACTORY_CONFIG_MAGIC 0x012C0138 +#define FACTORY_CONFIG_VERSION 0x00010001 + +/* Data Held in On-Board I2C device */ +struct factory_config { + u32 magic; + u32 version; + u8 mac[6]; + u32 fpga_type; + u32 spare; + u32 serialnumber; + char partnum[32]; +}; + +static struct factory_config factory_config; + +static void read_factory_config(struct memory_accessor *a, void *context) +{ + int ret; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config)); + if (ret != sizeof(struct factory_config)) { + pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n", + ret); + return; + } + + if (factory_config.magic != FACTORY_CONFIG_MAGIC) { + pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n", + factory_config.magic); + return; + } + + if (factory_config.version != FACTORY_CONFIG_VERSION) { + pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n", + factory_config.version); + return; + } + + pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac); + pr_info("MityOMAPL138: Part Number = %s\n", factory_config.partnum); + if (is_valid_ether_addr(factory_config.mac)) + memcpy(soc_info->emac_pdata->mac_addr, + factory_config.mac, ETH_ALEN); + else + pr_warning("MityOMAPL138: Invalid MAC found " + "in factory config block\n"); +} + +static struct at24_platform_data mityomapl138_fd_chip = { + .byte_len = 256, + .page_size = 8, + .flags = AT24_FLAG_READONLY | AT24_FLAG_IRUGO, + .setup = read_factory_config, + .context = NULL, +}; + +static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = { + .bus_freq = 100, /* kHz */ + .bus_delay = 0, /* usec */ +}; + +/* TPS65023 voltage regulator support */ +/* 1.2V Core */ +struct regulator_consumer_supply tps65023_dcdc1_consumers[] = { + { + .supply = "cvdd", + }, +}; + +/* 1.8V */ +struct regulator_consumer_supply tps65023_dcdc2_consumers[] = { + { + .supply = "usb0_vdda18", + }, + { + .supply = "usb1_vdda18", + }, + { + .supply = "ddr_dvdd18", + }, + { + .supply = "sata_vddr", + }, +}; + +/* 1.2V */ +struct regulator_consumer_supply tps65023_dcdc3_consumers[] = { + { + .supply = "sata_vdd", + }, + { + .supply = "usb_cvdd", + }, + { + .supply = "pll0_vdda", + }, + { + .supply = "pll1_vdda", + }, +}; + +/* 1.8V Aux LDO, not used */ +struct regulator_consumer_supply tps65023_ldo1_consumers[] = { + { + .supply = "1.8v_aux", + }, +}; + +/* FPGA VCC Aux (2.5 or 3.3) LDO */ +struct regulator_consumer_supply tps65023_ldo2_consumers[] = { + { + .supply = "vccaux", + }, +}; + +struct regulator_init_data tps65023_regulator_data[] = { + /* dcdc1 */ + { + .constraints = { + .min_uV = 1150000, + .max_uV = 1350000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers), + .consumer_supplies = tps65023_dcdc1_consumers, + }, + /* dcdc2 */ + { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers), + .consumer_supplies = tps65023_dcdc2_consumers, + }, + /* dcdc3 */ + { + .constraints = { + .min_uV = 1200000, + .max_uV = 1200000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers), + .consumer_supplies = tps65023_dcdc3_consumers, + }, + /* ldo1 */ + { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers), + .consumer_supplies = tps65023_ldo1_consumers, + }, + /* ldo2 */ + { + .constraints = { + .min_uV = 2500000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers), + .consumer_supplies = tps65023_ldo2_consumers, + }, +}; + +static struct i2c_board_info __initdata mityomap_tps65023_info[] = { + { + I2C_BOARD_INFO("tps65023", 0x48), + .platform_data = &tps65023_regulator_data[0], + }, + { + I2C_BOARD_INFO("24c02", 0x50), + .platform_data = &mityomapl138_fd_chip, + }, +}; + +static int __init pmic_tps65023_init(void) +{ + return i2c_register_board_info(1, mityomap_tps65023_info, + ARRAY_SIZE(mityomap_tps65023_info)); +} + +/* + * MityDSP-L138 includes a 256 MByte large-page NAND flash + * (128K blocks). + */ +struct mtd_partition mityomapl138_nandflash_partition[] = { + { + .name = "rootfs", + .offset = 0, + .size = SZ_128M, + .mask_flags = 0, /* MTD_WRITEABLE, */ + }, + { + .name = "homefs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct davinci_nand_pdata mityomapl138_nandflash_data = { + .parts = mityomapl138_nandflash_partition, + .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16, + .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */ +}; + +static struct resource mityomapl138_nandflash_resource[] = { + { + .start = DA8XX_AEMIF_CS3_BASE, + .end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mityomapl138_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &mityomapl138_nandflash_data, + }, + .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource), + .resource = mityomapl138_nandflash_resource, +}; + +static struct platform_device *mityomapl138_devices[] __initdata = { + &mityomapl138_nandflash_device, +}; + +static void __init mityomapl138_setup_nand(void) +{ + platform_add_devices(mityomapl138_devices, + ARRAY_SIZE(mityomapl138_devices)); +} + +static struct davinci_uart_config mityomapl138_uart_config __initdata = { + .enabled_uarts = 0x7, +}; + +static const short mityomap_mii_pins[] = { + DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3, + DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, + DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, + DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + +static const short mityomap_rmii_pins[] = { + DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, + DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, + DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, + DA850_MDIO_D, + -1 +}; + +static void __init mityomapl138_config_emac(void) +{ + void __iomem *cfg_chip3_base; + int ret; + u32 val; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */ + + cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); + val = __raw_readl(cfg_chip3_base); + + if (soc_info->emac_pdata->rmii_en) { + val |= BIT(8); + ret = davinci_cfg_reg_list(mityomap_rmii_pins); + pr_info("RMII PHY configured\n"); + } else { + val &= ~BIT(8); + ret = davinci_cfg_reg_list(mityomap_mii_pins); + pr_info("MII PHY configured\n"); + } + + if (ret) { + pr_warning("mii/rmii mux setup failed: %d\n", ret); + return; + } + + /* configure the CFGCHIP3 register for RMII or MII */ + __raw_writel(val, cfg_chip3_base); + + soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID; + + ret = da8xx_register_emac(); + if (ret) + pr_warning("emac registration failed: %d\n", ret); +} + +static struct davinci_pm_config da850_pm_pdata = { + .sleepcount = 128, +}; + +static struct platform_device da850_pm_device = { + .name = "pm-davinci", + .dev = { + .platform_data = &da850_pm_pdata, + }, + .id = -1, +}; + +static void __init mityomapl138_init(void) +{ + int ret; + + /* for now, no special EDMA channels are reserved */ + ret = da850_register_edma(NULL); + if (ret) + pr_warning("edma registration failed: %d\n", ret); + + ret = da8xx_register_watchdog(); + if (ret) + pr_warning("watchdog registration failed: %d\n", ret); + + davinci_serial_init(&mityomapl138_uart_config); + + ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata); + if (ret) + pr_warning("i2c0 registration failed: %d\n", ret); + + ret = pmic_tps65023_init(); + if (ret) + pr_warning("TPS65023 PMIC init failed: %d\n", ret); + + mityomapl138_setup_nand(); + + mityomapl138_config_emac(); + + ret = da8xx_register_rtc(); + if (ret) + pr_warning("rtc setup failed: %d\n", ret); + + ret = da850_register_cpufreq("pll0_sysclk3"); + if (ret) + pr_warning("cpufreq registration failed: %d\n", ret); + + ret = da8xx_register_cpuidle(); + if (ret) + pr_warning("cpuidle registration failed: %d\n", ret); + + ret = da850_register_pm(&da850_pm_device); + if (ret) + pr_warning("da850_evm_init: suspend registration failed: %d\n", + ret); +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init mityomapl138_console_init(void) +{ + if (!machine_is_mityomapl138()) + return 0; + + return add_preferred_console("ttyS", 1, "115200"); +} +console_initcall(mityomapl138_console_init); +#endif + +static void __init mityomapl138_map_io(void) +{ + da850_init(); +} + +MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DA8XX_DDR_BASE + 0x100), + .map_io = mityomapl138_map_io, + .init_irq = cp_intc_init, + .timer = &davinci_timer, + .init_machine = mityomapl138_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 4c30e929bbf9..04a8d16f2224 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -39,9 +39,7 @@ #include <mach/mmc.h> #include <mach/usb.h> -#define NEUROS_OSD2_PHY_MASK 0x2 -#define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ - +#define NEUROS_OSD2_PHY_ID "0:01" #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 @@ -252,8 +250,7 @@ static __init void davinci_ntosd2_init(void) davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); - soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID; davinci_setup_usb(1000, 8); /* diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c new file mode 100644 index 000000000000..c472dd88ad91 --- /dev/null +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -0,0 +1,64 @@ +/* + * Hawkboard.org based on TI's OMAP-L138 Platform + * + * Initial code: Syed Mohammed Khasim + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/cp_intc.h> +#include <mach/da8xx.h> + +static struct davinci_uart_config omapl138_hawk_uart_config __initdata = { + .enabled_uarts = 0x7, +}; + +static __init void omapl138_hawk_init(void) +{ + int ret; + + davinci_serial_init(&omapl138_hawk_uart_config); + + ret = da8xx_register_watchdog(); + if (ret) + pr_warning("omapl138_hawk_init: " + "watchdog registration failed: %d\n", + ret); +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init omapl138_hawk_console_init(void) +{ + if (!machine_is_omapl138_hawkboard()) + return 0; + + return add_preferred_console("ttyS", 2, "115200"); +} +console_initcall(omapl138_hawk_console_init); +#endif + +static void __init omapl138_hawk_map_io(void) +{ + da850_init(); +} + +MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DA8XX_DDR_BASE + 0x100), + .map_io = omapl138_hawk_map_io, + .init_irq = cp_intc_init, + .timer = &davinci_timer, + .init_machine = omapl138_hawk_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 23e664a1a802..ab4292d4f80b 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -42,9 +42,7 @@ #include <mach/mux.h> #include <mach/usb.h> -#define SFFSDR_PHY_MASK (0x2) -#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define SFFSDR_PHY_ID "0:01" static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 * UBL: Block 1 @@ -143,8 +141,7 @@ static __init void davinci_sffsdr_init(void) ARRAY_SIZE(davinci_sffsdr_devices)); sffsdr_init_i2c(); davinci_serial_init(&uart_config); - soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID; davinci_setup_usb(0, 0); /* We support only peripheral mode. */ /* mux VLYNQ pins */ diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index fe2a9d9c8bb7..5afa8fc48e7b 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -23,6 +23,9 @@ #include <linux/ratelimit.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> + #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -141,10 +144,63 @@ static struct davinci_uart_config serial_config __initconst = { .enabled_uarts = BIT(1), }; +static const uint32_t keymap[] = { + KEY(0, 0, KEY_NUMERIC_1), + KEY(0, 1, KEY_NUMERIC_2), + KEY(0, 2, KEY_NUMERIC_3), + KEY(0, 3, KEY_FN_F1), + KEY(0, 4, KEY_MENU), + + KEY(1, 0, KEY_NUMERIC_4), + KEY(1, 1, KEY_NUMERIC_5), + KEY(1, 2, KEY_NUMERIC_6), + KEY(1, 3, KEY_UP), + KEY(1, 4, KEY_FN_F2), + + KEY(2, 0, KEY_NUMERIC_7), + KEY(2, 1, KEY_NUMERIC_8), + KEY(2, 2, KEY_NUMERIC_9), + KEY(2, 3, KEY_LEFT), + KEY(2, 4, KEY_ENTER), + + KEY(3, 0, KEY_NUMERIC_STAR), + KEY(3, 1, KEY_NUMERIC_0), + KEY(3, 2, KEY_NUMERIC_POUND), + KEY(3, 3, KEY_DOWN), + KEY(3, 4, KEY_RIGHT), + + KEY(4, 0, KEY_FN_F3), + KEY(4, 1, KEY_FN_F4), + KEY(4, 2, KEY_MUTE), + KEY(4, 3, KEY_HOME), + KEY(4, 4, KEY_BACK), + + KEY(5, 0, KEY_VOLUMEDOWN), + KEY(5, 1, KEY_VOLUMEUP), + KEY(5, 2, KEY_F1), + KEY(5, 3, KEY_F2), + KEY(5, 4, KEY_F3), +}; + +static const struct matrix_keymap_data keymap_data = { + .keymap = keymap, + .keymap_size = ARRAY_SIZE(keymap), +}; + +static struct matrix_keypad_platform_data keypad_config = { + .keymap_data = &keymap_data, + .num_row_gpios = 6, + .num_col_gpios = 5, + .debounce_ms = 0, /* minimum */ + .active_low = 0, /* pull up realization */ + .no_autorepeat = 0, +}; + static struct tnetv107x_device_info evm_device_info __initconst = { .serial_config = &serial_config, .mmc_config[1] = &mmc_config, /* controller 1 */ .nand_config[0] = &nand_config, /* chip select 0 */ + .keypad_config = &keypad_config, }; static __init void tnetv107x_evm_board_init(void) diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 054c303caead..01ba080433db 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -236,7 +236,7 @@ static int __init clk_disable_unused(void) if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc)) continue; - pr_info("Clocks: disable unused %s\n", ck->name); + pr_debug("Clocks: disable unused %s\n", ck->name); davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, (ck->flags & PSC_SWRSTDISABLE) ? @@ -287,6 +287,79 @@ static unsigned long clk_sysclk_recalc(struct clk *clk) return rate; } +int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate) +{ + unsigned v; + struct pll_data *pll; + unsigned long input; + unsigned ratio = 0; + + /* If this is the PLL base clock, wrong function to call */ + if (clk->pll_data) + return -EINVAL; + + /* There must be a parent... */ + if (WARN_ON(!clk->parent)) + return -EINVAL; + + /* ... the parent must be a PLL... */ + if (WARN_ON(!clk->parent->pll_data)) + return -EINVAL; + + /* ... and this clock must have a divider. */ + if (WARN_ON(!clk->div_reg)) + return -EINVAL; + + pll = clk->parent->pll_data; + + input = clk->parent->rate; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + input = pll->input_rate; + + if (input > rate) { + /* + * Can afford to provide an output little higher than requested + * only if maximum rate supported by hardware on this sysclk + * is known. + */ + if (clk->maxrate) { + ratio = DIV_ROUND_CLOSEST(input, rate); + if (input / ratio > clk->maxrate) + ratio = 0; + } + + if (ratio == 0) + ratio = DIV_ROUND_UP(input, rate); + + ratio--; + } + + if (ratio > PLLDIV_RATIO_MASK) + return -EINVAL; + + do { + v = __raw_readl(pll->base + PLLSTAT); + } while (v & PLLSTAT_GOSTAT); + + v = __raw_readl(pll->base + clk->div_reg); + v &= ~PLLDIV_RATIO_MASK; + v |= ratio | PLLDIV_EN; + __raw_writel(v, pll->base + clk->div_reg); + + v = __raw_readl(pll->base + PLLCMD); + v |= PLLCMD_GOSET; + __raw_writel(v, pll->base + PLLCMD); + + do { + v = __raw_readl(pll->base + PLLSTAT); + } while (v & PLLSTAT_GOSTAT); + + return 0; +} +EXPORT_SYMBOL(davinci_set_sysclk_rate); + static unsigned long clk_leafclk_recalc(struct clk *clk) { if (WARN_ON(!clk->parent)) diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 01e36483ac3d..11099980b58b 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -70,6 +70,9 @@ #include <linux/list.h> #include <asm/clkdev.h> +#define PLLSTAT_GOSTAT BIT(0) +#define PLLCMD_GOSET BIT(0) + struct pll_data { u32 phys_base; void __iomem *base; @@ -86,6 +89,7 @@ struct clk { struct module *owner; const char *name; unsigned long rate; + unsigned long maxrate; /* H/W supported max rate */ u8 usecount; u8 lpsc; u8 gpsc; @@ -118,6 +122,7 @@ struct clk { int davinci_clk_init(struct clk_lookup *clocks); int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, unsigned int mult, unsigned int postdiv); +int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); extern struct platform_device davinci_wdt_device; extern void davinci_watchdog_reset(struct platform_device *); diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c index d3fa6de1e20f..343de73161fa 100644 --- a/arch/arm/mach-davinci/cpufreq.c +++ b/arch/arm/mach-davinci/cpufreq.c @@ -34,6 +34,8 @@ struct davinci_cpufreq { struct device *dev; struct clk *armclk; + struct clk *asyncclk; + unsigned long asyncrate; }; static struct davinci_cpufreq cpufreq; @@ -104,15 +106,27 @@ static int davinci_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* if moving to higher frequency, up the voltage beforehand */ - if (pdata->set_voltage && freqs.new > freqs.old) - pdata->set_voltage(idx); + if (pdata->set_voltage && freqs.new > freqs.old) { + ret = pdata->set_voltage(idx); + if (ret) + goto out; + } ret = clk_set_rate(armclk, idx); + if (ret) + goto out; + + if (cpufreq.asyncclk) { + ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate); + if (ret) + goto out; + } /* if moving to lower freq, lower the voltage after lowering freq */ if (pdata->set_voltage && freqs.new < freqs.old) pdata->set_voltage(idx); +out: cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); return ret; @@ -185,6 +199,7 @@ static struct cpufreq_driver davinci_driver = { static int __init davinci_cpufreq_probe(struct platform_device *pdev) { struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; + struct clk *asyncclk; if (!pdata) return -EINVAL; @@ -199,6 +214,12 @@ static int __init davinci_cpufreq_probe(struct platform_device *pdev) return PTR_ERR(cpufreq.armclk); } + asyncclk = clk_get(cpufreq.dev, "async"); + if (!IS_ERR(asyncclk)) { + cpufreq.asyncclk = asyncclk; + cpufreq.asyncrate = clk_get_rate(asyncclk); + } + return cpufreq_register_driver(&davinci_driver); } @@ -206,6 +227,9 @@ static int __exit davinci_cpufreq_remove(struct platform_device *pdev) { clk_put(cpufreq.armclk); + if (cpufreq.asyncclk) + clk_put(cpufreq.asyncclk); + return cpufreq_unregister_driver(&davinci_driver); } diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 68ed58a48252..63916b902760 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -86,6 +86,8 @@ static struct clk pll0_sysclk3 = { .parent = &pll0_clk, .flags = CLK_PLL, .div_reg = PLLDIV3, + .set_rate = davinci_set_sysclk_rate, + .maxrate = 100000000, }; static struct clk pll0_sysclk4 = { @@ -323,12 +325,19 @@ static struct clk lcdc_clk = { .gpsc = 1, }; -static struct clk mmcsd_clk = { - .name = "mmcsd", +static struct clk mmcsd0_clk = { + .name = "mmcsd0", .parent = &pll0_sysclk2, .lpsc = DA8XX_LPSC0_MMC_SD, }; +static struct clk mmcsd1_clk = { + .name = "mmcsd1", + .parent = &pll0_sysclk2, + .lpsc = DA850_LPSC1_MMC_SD1, + .gpsc = 1, +}; + static struct clk aemif_clk = { .name = "aemif", .parent = &pll0_sysclk3, @@ -375,7 +384,8 @@ static struct clk_lookup da850_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), CLK("da8xx_lcdc.0", NULL, &lcdc_clk), - CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK("davinci_mmc.0", NULL, &mmcsd0_clk), + CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, NULL, NULL), }; @@ -572,15 +582,9 @@ const short da850_cpgmac_pins[] __initdata = { DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER, DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3, DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK, - DA850_MDIO_D, - -1 -}; - -const short da850_rmii_pins[] __initdata = { - DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, - DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, - DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK, - DA850_MDIO_D, + DA850_MDIO_D, DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN, + DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, DA850_RMII_RXER, + DA850_RMII_MHZ_50_CLK, -1 }; @@ -607,27 +611,19 @@ const short da850_mmcsd0_pins[] __initdata = { -1 }; -const short da850_nand_pins[] __initdata = { - DA850_EMA_D_7, DA850_EMA_D_6, DA850_EMA_D_5, DA850_EMA_D_4, - DA850_EMA_D_3, DA850_EMA_D_2, DA850_EMA_D_1, DA850_EMA_D_0, - DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4, - DA850_NEMA_WE, DA850_NEMA_OE, - -1 -}; - -const short da850_nor_pins[] __initdata = { +const short da850_emif25_pins[] __initdata = { DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2, - DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1, - DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5, - DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9, - DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13, - DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1, - DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5, - DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9, - DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13, - DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17, - DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21, - DA850_EMA_A_22, DA850_EMA_A_23, + DA850_NEMA_CS_3, DA850_NEMA_CS_4, DA850_NEMA_WE, DA850_NEMA_OE, + DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, + DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, + DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11, + DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15, + DA850_EMA_A_0, DA850_EMA_A_1, DA850_EMA_A_2, DA850_EMA_A_3, + DA850_EMA_A_4, DA850_EMA_A_5, DA850_EMA_A_6, DA850_EMA_A_7, + DA850_EMA_A_8, DA850_EMA_A_9, DA850_EMA_A_10, DA850_EMA_A_11, + DA850_EMA_A_12, DA850_EMA_A_13, DA850_EMA_A_14, DA850_EMA_A_15, + DA850_EMA_A_16, DA850_EMA_A_17, DA850_EMA_A_18, DA850_EMA_A_19, + DA850_EMA_A_20, DA850_EMA_A_21, DA850_EMA_A_22, DA850_EMA_A_23, -1 }; @@ -851,7 +847,7 @@ static const struct da850_opp da850_opp_300 = { .prediv = 1, .mult = 25, .postdiv = 2, - .cvdd_min = 1140000, + .cvdd_min = 1200000, .cvdd_max = 1320000, }; @@ -860,7 +856,7 @@ static const struct da850_opp da850_opp_200 = { .prediv = 1, .mult = 25, .postdiv = 3, - .cvdd_min = 1050000, + .cvdd_min = 1100000, .cvdd_max = 1160000, }; @@ -869,7 +865,7 @@ static const struct da850_opp da850_opp_96 = { .prediv = 1, .mult = 20, .postdiv = 5, - .cvdd_min = 950000, + .cvdd_min = 1000000, .cvdd_max = 1050000, }; @@ -929,10 +925,16 @@ static struct platform_device da850_cpufreq_device = { .dev = { .platform_data = &cpufreq_info, }, + .id = -1, }; -int __init da850_register_cpufreq(void) +int __init da850_register_cpufreq(char *async_clk) { + /* cpufreq driver can help keep an "async" clock constant */ + if (async_clk) + clk_add_alias("async", da850_cpufreq_device.name, + async_clk, NULL); + return platform_device_register(&da850_cpufreq_device); } @@ -983,7 +985,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index) return 0; } #else -int __init da850_register_cpufreq(void) +int __init da850_register_cpufreq(char *async_clk) { return 0; } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 52bc7b1c6ca3..9eec63070e0c 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,6 +24,7 @@ #include "clock.h" #define DA8XX_TPCC_BASE 0x01c00000 +#define DA850_MMCSD1_BASE 0x01e1b000 #define DA850_TPCC1_BASE 0x01e30000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 @@ -41,7 +42,6 @@ #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 #define DA8XX_EMAC_RAM_OFFSET 0x0000 -#define DA8XX_MDIO_REG_OFFSET 0x4000 #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K void __iomem *da8xx_syscfg0_base; @@ -351,7 +351,7 @@ int __init da8xx_register_watchdog(void) static struct resource da8xx_emac_resources[] = { { .start = DA8XX_EMAC_CPPI_PORT_BASE, - .end = DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1, + .end = DA8XX_EMAC_CPPI_PORT_BASE + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { @@ -380,7 +380,6 @@ struct emac_platform_data da8xx_emac_pdata = { .ctrl_reg_offset = DA8XX_EMAC_CTRL_REG_OFFSET, .ctrl_mod_reg_offset = DA8XX_EMAC_MOD_REG_OFFSET, .ctrl_ram_offset = DA8XX_EMAC_RAM_OFFSET, - .mdio_reg_offset = DA8XX_MDIO_REG_OFFSET, .ctrl_ram_size = DA8XX_EMAC_CTRL_RAM_SIZE, .version = EMAC_VERSION_2, }; @@ -395,9 +394,34 @@ static struct platform_device da8xx_emac_device = { .resource = da8xx_emac_resources, }; +static struct resource da8xx_mdio_resources[] = { + { + .start = DA8XX_EMAC_MDIO_BASE, + .end = DA8XX_EMAC_MDIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da8xx_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(da8xx_mdio_resources), + .resource = da8xx_mdio_resources, +}; + int __init da8xx_register_emac(void) { - return platform_device_register(&da8xx_emac_device); + int ret; + + ret = platform_device_register(&da8xx_mdio_device); + if (ret < 0) + return ret; + ret = platform_device_register(&da8xx_emac_device); + if (ret < 0) + return ret; + ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev), + NULL, &da8xx_emac_device.dev); + return ret; } static struct resource da830_mcasp1_resources[] = { @@ -566,6 +590,44 @@ int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config) return platform_device_register(&da8xx_mmcsd0_device); } +#ifdef CONFIG_ARCH_DAVINCI_DA850 +static struct resource da850_mmcsd1_resources[] = { + { /* registers */ + .start = DA850_MMCSD1_BASE, + .end = DA850_MMCSD1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DA850_MMCSDINT0_1, + .end = IRQ_DA850_MMCSDINT0_1, + .flags = IORESOURCE_IRQ, + }, + { /* DMA RX */ + .start = EDMA_CTLR_CHAN(1, 28), + .end = EDMA_CTLR_CHAN(1, 28), + .flags = IORESOURCE_DMA, + }, + { /* DMA TX */ + .start = EDMA_CTLR_CHAN(1, 29), + .end = EDMA_CTLR_CHAN(1, 29), + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device da850_mmcsd1_device = { + .name = "davinci_mmc", + .id = 1, + .num_resources = ARRAY_SIZE(da850_mmcsd1_resources), + .resource = da850_mmcsd1_resources, +}; + +int __init da850_register_mmcsd1(struct davinci_mmc_config *config) +{ + da850_mmcsd1_device.dev.platform_data = config; + return platform_device_register(&da850_mmcsd1_device); +} +#endif + static struct resource da8xx_rtc_resources[] = { { .start = DA8XX_RTC_BASE, diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 2718a3a90dff..c9a86d8130d1 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -31,8 +31,10 @@ #define TNETV107X_TPTC0_BASE 0x01c10000 #define TNETV107X_TPTC1_BASE 0x01c10400 #define TNETV107X_WDOG_BASE 0x08086700 +#define TNETV107X_TSC_BASE 0x08088500 #define TNETV107X_SDIO0_BASE 0x08088700 #define TNETV107X_SDIO1_BASE 0x08088800 +#define TNETV107X_KEYPAD_BASE 0x08088a00 #define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000 #define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000 #define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000 @@ -298,12 +300,55 @@ static int __init nand_init(int chipsel, struct davinci_nand_pdata *data) return platform_device_register(pdev); } +static struct resource keypad_resources[] = { + { + .start = TNETV107X_KEYPAD_BASE, + .end = TNETV107X_KEYPAD_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_TNETV107X_KEYPAD, + .flags = IORESOURCE_IRQ, + .name = "press", + }, + { + .start = IRQ_TNETV107X_KEYPAD_FREE, + .flags = IORESOURCE_IRQ, + .name = "release", + }, +}; + +static struct platform_device keypad_device = { + .name = "tnetv107x-keypad", + .num_resources = ARRAY_SIZE(keypad_resources), + .resource = keypad_resources, +}; + +static struct resource tsc_resources[] = { + { + .start = TNETV107X_TSC_BASE, + .end = TNETV107X_TSC_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_TNETV107X_TSC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tsc_device = { + .name = "tnetv107x-ts", + .num_resources = ARRAY_SIZE(tsc_resources), + .resource = tsc_resources, +}; + void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) { int i; platform_device_register(&edma_device); platform_device_register(&tnetv107x_wdt_device); + platform_device_register(&tsc_device); if (info->serial_config) davinci_serial_init(info->serial_config); @@ -317,4 +362,9 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) for (i = 0; i < 4; i++) if (info->nand_config[i]) nand_init(i, info->nand_config[i]); + + if (info->keypad_config) { + keypad_device.dev.platform_data = info->keypad_config; + platform_device_register(&keypad_device); + } } diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 8b7201e4c79c..2a9a252327d8 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -213,7 +213,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c); /* Configure pull down control */ - __raw_writel((__raw_readl(pupdctl1) & ~0x400), + __raw_writel((__raw_readl(pupdctl1) & ~0xfc0), pupdctl1); mmcsd1_resources[0].start = DM365_MMCSD1_BASE; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 7781e35daec3..a12065e87266 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -691,7 +691,6 @@ static struct emac_platform_data dm365_emac_pdata = { .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, .ctrl_ram_offset = DM365_EMAC_CNTRL_RAM_OFFSET, - .mdio_reg_offset = DM365_EMAC_MDIO_OFFSET, .ctrl_ram_size = DM365_EMAC_CNTRL_RAM_SIZE, .version = EMAC_VERSION_2, }; @@ -699,7 +698,7 @@ static struct emac_platform_data dm365_emac_pdata = { static struct resource dm365_emac_resources[] = { { .start = DM365_EMAC_BASE, - .end = DM365_EMAC_BASE + 0x47ff, + .end = DM365_EMAC_BASE + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { @@ -734,6 +733,21 @@ static struct platform_device dm365_emac_device = { .resource = dm365_emac_resources, }; +static struct resource dm365_mdio_resources[] = { + { + .start = DM365_EMAC_MDIO_BASE, + .end = DM365_EMAC_MDIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm365_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(dm365_mdio_resources), + .resource = dm365_mdio_resources, +}; + static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_VDINT0] = 2, [IRQ_VDINT1] = 6, @@ -1219,7 +1233,12 @@ static int __init dm365_init_devices(void) davinci_cfg_reg(DM365_INT_EDMA_CC); platform_device_register(&dm365_edma_device); + + platform_device_register(&dm365_mdio_device); platform_device_register(&dm365_emac_device); + clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev), + NULL, &dm365_emac_device.dev); + /* Add isif clock alias */ clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL); platform_device_register(&dm365_vpss_device); diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 5e5b0a7831fb..0608dd776a16 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -322,7 +322,6 @@ static struct emac_platform_data dm644x_emac_pdata = { .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET, - .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET, .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE, .version = EMAC_VERSION_1, }; @@ -330,7 +329,7 @@ static struct emac_platform_data dm644x_emac_pdata = { static struct resource dm644x_emac_resources[] = { { .start = DM644X_EMAC_BASE, - .end = DM644X_EMAC_BASE + 0x47ff, + .end = DM644X_EMAC_BASE + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { @@ -350,6 +349,21 @@ static struct platform_device dm644x_emac_device = { .resource = dm644x_emac_resources, }; +static struct resource dm644x_mdio_resources[] = { + { + .start = DM644X_EMAC_MDIO_BASE, + .end = DM644X_EMAC_MDIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm644x_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(dm644x_mdio_resources), + .resource = dm644x_mdio_resources, +}; + /* * Device specific mux setup * @@ -776,7 +790,12 @@ static int __init dm644x_init_devices(void) clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL); clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL); platform_device_register(&dm644x_edma_device); + + platform_device_register(&dm644x_mdio_device); platform_device_register(&dm644x_emac_device); + clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev), + NULL, &dm644x_emac_device.dev); + platform_device_register(&dm644x_vpss_device); platform_device_register(&dm644x_ccdc_dev); platform_device_register(&vpfe_capture_dev); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 26e8a9c7f50b..1e0f809644bb 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -358,7 +358,6 @@ static struct emac_platform_data dm646x_emac_pdata = { .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET, - .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET, .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE, .version = EMAC_VERSION_2, }; @@ -366,7 +365,7 @@ static struct emac_platform_data dm646x_emac_pdata = { static struct resource dm646x_emac_resources[] = { { .start = DM646X_EMAC_BASE, - .end = DM646X_EMAC_BASE + 0x47ff, + .end = DM646X_EMAC_BASE + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { @@ -401,6 +400,21 @@ static struct platform_device dm646x_emac_device = { .resource = dm646x_emac_resources, }; +static struct resource dm646x_mdio_resources[] = { + { + .start = DM646X_EMAC_MDIO_BASE, + .end = DM646X_EMAC_MDIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm646x_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(dm646x_mdio_resources), + .resource = dm646x_mdio_resources, +}; + /* * Device specific mux setup * @@ -896,7 +910,11 @@ static int __init dm646x_init_devices(void) if (!cpu_is_davinci_dm646x()) return 0; + platform_device_register(&dm646x_mdio_device); platform_device_register(&dm646x_emac_device); + clk_add_alias(NULL, dev_name(&dm646x_mdio_device.dev), + NULL, &dm646x_emac_device.dev); + return 0; } postcore_initcall(dm646x_init_devices); diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 2ede598b77dd..6b9669869c46 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -354,10 +354,12 @@ static int irq2ctlr(int irq) static irqreturn_t dma_irq_handler(int irq, void *data) { int i; - unsigned ctlr; + int ctlr; unsigned int cnt = 0; ctlr = irq2ctlr(irq); + if (ctlr < 0) + return IRQ_NONE; dev_dbg(data, "dma_irq_handler\n"); @@ -408,10 +410,12 @@ static irqreturn_t dma_irq_handler(int irq, void *data) static irqreturn_t dma_ccerr_handler(int irq, void *data) { int i; - unsigned ctlr; + int ctlr; unsigned int cnt = 0; ctlr = irq2ctlr(irq); + if (ctlr < 0) + return IRQ_NONE; dev_dbg(data, "dma_ccerr_handler\n"); diff --git a/arch/arm/mach-davinci/include/mach/aemif.h b/arch/arm/mach-davinci/include/mach/aemif.h new file mode 100644 index 000000000000..05b293443097 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/aemif.h @@ -0,0 +1,36 @@ +/* + * TI DaVinci AEMIF support + * + * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef _MACH_DAVINCI_AEMIF_H +#define _MACH_DAVINCI_AEMIF_H + +#define NRCSR_OFFSET 0x00 +#define AWCCR_OFFSET 0x04 +#define A1CR_OFFSET 0x10 + +#define ACR_ASIZE_MASK 0x3 +#define ACR_EW_MASK BIT(30) +#define ACR_SS_MASK BIT(31) + +/* All timings in nanoseconds */ +struct davinci_aemif_timing { + u8 wsetup; + u8 wstrobe; + u8 whold; + + u8 rsetup; + u8 rstrobe; + u8 rhold; + + u8 ta; +}; + +int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, + void __iomem *base, unsigned cs); +#endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 3c07059f526e..4247b3f53b33 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -76,9 +76,10 @@ int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); +int da850_register_mmcsd1(struct davinci_mmc_config *config); void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata); int da8xx_register_rtc(void); -int da850_register_cpufreq(void); +int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem * __init da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); @@ -121,11 +122,9 @@ extern const short da850_uart2_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; extern const short da850_cpgmac_pins[]; -extern const short da850_rmii_pins[]; extern const short da850_mcasp_pins[]; extern const short da850_lcdcntl_pins[]; extern const short da850_mmcsd0_pins[]; -extern const short da850_nand_pins[]; -extern const short da850_nor_pins[]; +extern const short da850_emif25_pins[]; #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h index ea5df3b49ec4..2563bf4e93a1 100644 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ b/arch/arm/mach-davinci/include/mach/dm365.h @@ -21,10 +21,10 @@ #include <media/davinci/vpfe_capture.h> #define DM365_EMAC_BASE (0x01D07000) +#define DM365_EMAC_MDIO_BASE (DM365_EMAC_BASE + 0x4000) #define DM365_EMAC_CNTRL_OFFSET (0x0000) #define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000) #define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000) -#define DM365_EMAC_MDIO_OFFSET (0x4000) #define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) /* Base of key scan register bank */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 6fca568a0fd2..5a1b26d4e68b 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -28,10 +28,10 @@ #include <media/davinci/vpfe_capture.h> #define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_MDIO_BASE (DM644X_EMAC_BASE + 0x4000) #define DM644X_EMAC_CNTRL_OFFSET (0x0000) #define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) #define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM644X_EMAC_MDIO_OFFSET (0x4000) #define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) #define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01E00000 diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index 0a27ee9a70e1..7a27f3f13913 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -19,10 +19,10 @@ #include <linux/davinci_emac.h> #define DM646X_EMAC_BASE (0x01C80000) +#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000) #define DM646X_EMAC_CNTRL_OFFSET (0x0000) #define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) #define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM646X_EMAC_MDIO_OFFSET (0x4000) #define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) #define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000 diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index b2ad8090bd10..025151049f05 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -30,9 +30,6 @@ #include <linux/mtd/nand.h> -#define NRCSR_OFFSET 0x00 -#define AWCCR_OFFSET 0x04 -#define A1CR_OFFSET 0x10 #define NANDFCR_OFFSET 0x60 #define NANDFSR_OFFSET 0x64 #define NANDF1ECC_OFFSET 0x70 @@ -83,6 +80,9 @@ struct davinci_nand_pdata { /* platform_data */ /* Main and mirror bbt descriptor overrides */ struct nand_bbt_descr *bbt_td; struct nand_bbt_descr *bbt_md; + + /* Access timings */ + struct davinci_aemif_timing *timing; }; #endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 983da6e4554c..62b0858f68ca 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -172,6 +172,7 @@ #define DA8XX_LPSC1_UART2 13 #define DA8XX_LPSC1_LCDC 16 #define DA8XX_LPSC1_PWM 17 +#define DA850_LPSC1_MMC_SD1 18 #define DA8XX_LPSC1_ECAP 20 #define DA830_LPSC1_EQEP 21 #define DA850_LPSC1_TPTC2 21 diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h index c72064733123..5a681d880dcb 100644 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -33,6 +33,8 @@ #ifndef __ASSEMBLY__ #include <linux/serial_8250.h> +#include <linux/input/matrix_keypad.h> + #include <mach/mmc.h> #include <mach/nand.h> #include <mach/serial.h> @@ -41,6 +43,7 @@ struct tnetv107x_device_info { struct davinci_uart_config *serial_config; struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */ struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */ + struct matrix_keypad_platform_data *keypad_config; }; extern struct platform_device tnetv107x_wdt_device; diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 15a6192ad6eb..47723e8d75a4 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -88,6 +88,8 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* DA8xx boards */ DEBUG_LL_DA8XX(davinci_da830_evm, 2); DEBUG_LL_DA8XX(davinci_da850_evm, 2); + DEBUG_LL_DA8XX(mityomapl138, 1); + DEBUG_LL_DA8XX(omapl138_hawkboard, 2); /* TNETV107x boards */ DEBUG_LL_TNETV107X(tnetv107x, 1); diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c index 864e60482c53..daeae06430b9 100644 --- a/arch/arm/mach-davinci/tnetv107x.c +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -104,7 +104,7 @@ static u32 pll_ext_freq[] = { }; /* PSC control registers */ -static u32 psc_regs[] __initconst = { TNETV107X_PSC_BASE }; +static u32 psc_regs[] = { TNETV107X_PSC_BASE }; /* Host map for interrupt controller */ static u32 intc_host_map[] = { 0x01010000, 0x01010101, -1 }; @@ -581,7 +581,14 @@ static struct davinci_id ids[] = { .part_no = 0xb8a1, .manufacturer = 0x017, .cpu_id = DAVINCI_CPU_ID_TNETV107X, - .name = "tnetv107x rev1.0", + .name = "tnetv107x rev 1.0", + }, + { + .variant = 0x1, + .part_no = 0xb8a1, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_TNETV107X, + .name = "tnetv107x rev 1.1/1.2", }, }; diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h index 9b44c19e95ec..60bde56fba4c 100644 --- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h +++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h @@ -7,4 +7,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define VMALLOC_END (PAGE_OFFSET + 0x1f000000) +#define VMALLOC_END 0xdf000000 diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h index d0958d860a3c..0ffbb7c85e59 100644 --- a/arch/arm/mach-footbridge/include/mach/vmalloc.h +++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h @@ -7,4 +7,4 @@ */ -#define VMALLOC_END (PAGE_OFFSET + 0x30000000) +#define VMALLOC_END 0xf0000000 diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h index ff1460d6841b..a45915b88756 100644 --- a/arch/arm/mach-h720x/include/mach/vmalloc.h +++ b/arch/arm/mach-h720x/include/mach/vmalloc.h @@ -5,6 +5,6 @@ #ifndef __ARCH_ARM_VMALLOC_H #define __ARCH_ARM_VMALLOC_H -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 #endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c5c0369bb481..9b45f1f523fa 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -146,8 +146,8 @@ choice default MACH_EUKREA_MBIMX27_BASEBOARD config MACH_EUKREA_MBIMX27_BASEBOARD - prompt "Eukrea MBIMX27 development board" - bool + bool "Eukrea MBIMX27 development board" + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SPI_IMX help @@ -163,6 +163,15 @@ config MACH_MX27_3DS Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. +config MACH_IMX27_VISSTRIM_M10 + bool "Vista Silicon i.MX27 Visstrim_m10" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for Visstrim_m10 platform and its different variants. + This includes specific configurations for the board and its + peripherals. + config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" select IMX_HAVE_PLATFORM_IMX_UART @@ -173,6 +182,7 @@ config MACH_IMX27LITE config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 46a9fdfbbd15..5582692bb176 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o +obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c index c05096c38301..daca30b2d5b1 100644 --- a/arch/arm/mach-imx/clock-imx1.c +++ b/arch/arm/mach-imx/clock-imx1.c @@ -592,7 +592,7 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk) + _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk) _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK(NULL, "mshc", mshc_clk) diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c index bb419ef4d133..cf15ea516a72 100644 --- a/arch/arm/mach-imx/clock-imx21.c +++ b/arch/arm/mach-imx/clock-imx21.c @@ -1172,9 +1172,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "pwm", pwm_clk[0]) _REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0]) _REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1]) - _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0]) - _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1]) - _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) + _REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0]) + _REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1]) + _REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2]) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0]) diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 5a1aa15c8a16..98a25bada783 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -594,27 +594,27 @@ DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk); DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk); /* Clocks we cannot directly gate, but drivers need their rates */ -DEFINE_CLOCK(cspi1_clk, 0, 0, 0, NULL, &cspi1_clk1, &per2_clk); -DEFINE_CLOCK(cspi2_clk, 1, 0, 0, NULL, &cspi2_clk1, &per2_clk); -DEFINE_CLOCK(cspi3_clk, 2, 0, 0, NULL, &cspi13_clk1, &per2_clk); -DEFINE_CLOCK(sdhc1_clk, 0, 0, 0, NULL, &sdhc1_clk1, &per2_clk); -DEFINE_CLOCK(sdhc2_clk, 1, 0, 0, NULL, &sdhc2_clk1, &per2_clk); -DEFINE_CLOCK(sdhc3_clk, 2, 0, 0, NULL, &sdhc3_clk1, &per2_clk); -DEFINE_CLOCK(pwm_clk, 0, 0, 0, NULL, &pwm_clk1, &per1_clk); -DEFINE_CLOCK(gpt1_clk, 0, 0, 0, NULL, &gpt1_clk1, &per1_clk); -DEFINE_CLOCK(gpt2_clk, 1, 0, 0, NULL, &gpt2_clk1, &per1_clk); -DEFINE_CLOCK(gpt3_clk, 2, 0, 0, NULL, &gpt3_clk1, &per1_clk); -DEFINE_CLOCK(gpt4_clk, 3, 0, 0, NULL, &gpt4_clk1, &per1_clk); -DEFINE_CLOCK(gpt5_clk, 4, 0, 0, NULL, &gpt5_clk1, &per1_clk); -DEFINE_CLOCK(gpt6_clk, 5, 0, 0, NULL, &gpt6_clk1, &per1_clk); -DEFINE_CLOCK(uart1_clk, 0, 0, 0, NULL, &uart1_clk1, &per1_clk); -DEFINE_CLOCK(uart2_clk, 1, 0, 0, NULL, &uart2_clk1, &per1_clk); -DEFINE_CLOCK(uart3_clk, 2, 0, 0, NULL, &uart3_clk1, &per1_clk); -DEFINE_CLOCK(uart4_clk, 3, 0, 0, NULL, &uart4_clk1, &per1_clk); -DEFINE_CLOCK(uart5_clk, 4, 0, 0, NULL, &uart5_clk1, &per1_clk); -DEFINE_CLOCK(uart6_clk, 5, 0, 0, NULL, &uart6_clk1, &per1_clk); -DEFINE_CLOCK1(lcdc_clk, 0, 0, 0, parent, &lcdc_clk1, &per3_clk); -DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk); +DEFINE_CLOCK(cspi1_clk, 0, NULL, 0, NULL, &cspi1_clk1, &per2_clk); +DEFINE_CLOCK(cspi2_clk, 1, NULL, 0, NULL, &cspi2_clk1, &per2_clk); +DEFINE_CLOCK(cspi3_clk, 2, NULL, 0, NULL, &cspi13_clk1, &per2_clk); +DEFINE_CLOCK(sdhc1_clk, 0, NULL, 0, NULL, &sdhc1_clk1, &per2_clk); +DEFINE_CLOCK(sdhc2_clk, 1, NULL, 0, NULL, &sdhc2_clk1, &per2_clk); +DEFINE_CLOCK(sdhc3_clk, 2, NULL, 0, NULL, &sdhc3_clk1, &per2_clk); +DEFINE_CLOCK(pwm_clk, 0, NULL, 0, NULL, &pwm_clk1, &per1_clk); +DEFINE_CLOCK(gpt1_clk, 0, NULL, 0, NULL, &gpt1_clk1, &per1_clk); +DEFINE_CLOCK(gpt2_clk, 1, NULL, 0, NULL, &gpt2_clk1, &per1_clk); +DEFINE_CLOCK(gpt3_clk, 2, NULL, 0, NULL, &gpt3_clk1, &per1_clk); +DEFINE_CLOCK(gpt4_clk, 3, NULL, 0, NULL, &gpt4_clk1, &per1_clk); +DEFINE_CLOCK(gpt5_clk, 4, NULL, 0, NULL, &gpt5_clk1, &per1_clk); +DEFINE_CLOCK(gpt6_clk, 5, NULL, 0, NULL, &gpt6_clk1, &per1_clk); +DEFINE_CLOCK(uart1_clk, 0, NULL, 0, NULL, &uart1_clk1, &per1_clk); +DEFINE_CLOCK(uart2_clk, 1, NULL, 0, NULL, &uart2_clk1, &per1_clk); +DEFINE_CLOCK(uart3_clk, 2, NULL, 0, NULL, &uart3_clk1, &per1_clk); +DEFINE_CLOCK(uart4_clk, 3, NULL, 0, NULL, &uart4_clk1, &per1_clk); +DEFINE_CLOCK(uart5_clk, 4, NULL, 0, NULL, &uart5_clk1, &per1_clk); +DEFINE_CLOCK(uart6_clk, 5, NULL, 0, NULL, &uart6_clk1, &per1_clk); +DEFINE_CLOCK1(lcdc_clk, 0, NULL, 0, parent, &lcdc_clk1, &per3_clk); +DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -640,9 +640,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) - _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk) diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h index a8d94f078196..81979486218e 100644 --- a/arch/arm/mach-imx/devices-imx1.h +++ b/arch/arm/mach-imx/devices-imx1.h @@ -9,10 +9,12 @@ #include <mach/mx1.h> #include <mach/devices-common.h> -#define imx1_add_i2c_imx(pdata) \ - imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata) +extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst; +#define imx1_add_imx_i2c(pdata) \ + imx_add_imx_i2c(&imx1_imx_i2c_data, pdata) -#define imx1_add_imx_uart0(pdata) \ - imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata) -#define imx1_add_imx_uart1(pdata) \ - imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata) +extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst; +#define imx1_add_imx_uart(id, pdata) \ + imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata) +#define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata) +#define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata) diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 42788e99d127..d189039749b0 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -9,22 +9,28 @@ #include <mach/mx21.h> #include <mach/devices-common.h> -#define imx21_add_i2c_imx(pdata) \ - imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata) +extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst; +#define imx21_add_imx_i2c(pdata) \ + imx_add_imx_i2c(&imx21_imx_i2c_data, pdata) -#define imx21_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata) -#define imx21_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata) -#define imx21_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata) -#define imx21_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata) +extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst; +#define imx21_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst; +#define imx21_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata) +#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata) +#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata) +#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata) +#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata) + +extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst; #define imx21_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) -#define imx21_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata) -#define imx21_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata) +extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst; +#define imx21_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx21_cspi_data[id], pdata) +#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata) +#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 65e7bb7ec2e8..e11606b4d31c 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -9,30 +9,31 @@ #include <mach/mx27.h> #include <mach/devices-common.h> -#define imx27_add_i2c_imx0(pdata) \ - imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata) -#define imx27_add_i2c_imx1(pdata) \ - imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata) +extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst; +#define imx27_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata) -#define imx27_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata) -#define imx27_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata) -#define imx27_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata) -#define imx27_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata) -#define imx27_add_imx_uart4(pdata) \ - imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata) -#define imx27_add_imx_uart5(pdata) \ - imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata) +extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst; +#define imx27_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst; +#define imx27_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata) +#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata) +#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata) +#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata) +#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata) +#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata) +#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata) + +extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst; #define imx27_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) -#define imx27_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata) -#define imx27_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata) -#define imx27_add_spi_imx2(pdata) \ - imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata) +extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst; +#define imx27_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx27_cspi_data[id], pdata) +#define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata) +#define imx27_add_spi_imx1(pdata) imx27_add_cspi(1, pdata) +#define imx27_add_spi_imx2(pdata) imx27_add_cspi(2, pdata) diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c index 9c271a752b84..423fa05dabd0 100644 --- a/arch/arm/mach-imx/devices.c +++ b/arch/arm/mach-imx/devices.c @@ -480,41 +480,6 @@ struct platform_device mxc_usbh2 = { }; #endif -#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \ - { \ - .name = _name, \ - .start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ - .end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ - .flags = IORESOURCE_DMA, \ - } - -#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \ - static struct resource imx_ssi_resources ## n[] = { \ - { \ - .start = MX2x_SSI ## ssin ## _BASE_ADDR, \ - .end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = MX2x_INT_SSI1, \ - .end = MX2x_INT_SSI1, \ - .flags = IORESOURCE_IRQ, \ - }, \ - DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \ - DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \ - DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \ - DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \ - }; \ - \ - struct platform_device imx_ssi_device ## n = { \ - .name = "imx-ssi", \ - .id = n, \ - .num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \ - .resource = imx_ssi_resources ## n, \ - } - -DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); -DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); - /* GPIO port description */ #define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \ { \ diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h index efd4527506a5..57d4b1cac039 100644 --- a/arch/arm/mach-imx/devices.h +++ b/arch/arm/mach-imx/devices.h @@ -26,7 +26,5 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mx21_usbhc_device; -extern struct platform_device imx_ssi_device0; -extern struct platform_device imx_ssi_device1; extern struct platform_device imx_kpp_device; #endif diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 4edc5f439201..026263c665ca 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -36,13 +36,12 @@ #include <mach/hardware.h> #include <mach/mmc.h> #include <mach/spi.h> -#include <mach/ssi.h> #include <mach/audmux.h> #include "devices-imx27.h" #include "devices.h" -static int eukrea_mbimx27_pins[] = { +static const int eukrea_mbimx27_pins[] __initconst = { /* UART2 */ PE3_PF_UART2_CTS, PE4_PF_UART2_RTS, @@ -311,7 +310,8 @@ static struct imxmmc_platform_data sdhc_pdata = { .dat3_card_detect = 1, }; -struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata = { +static const +struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = { .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE, }; @@ -357,7 +357,7 @@ void __init eukrea_mbimx27_baseboard_init(void) i2c_register_board_info(0, eukrea_mbimx27_i2c_devices, ARRAY_SIZE(eukrea_mbimx27_i2c_devices)); - mxc_register_device(&imx_ssi_device0, &eukrea_mbimx27_ssi_pdata); + imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata); #if defined(CONFIG_TOUCHSCREEN_ADS7846) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 339150ab0ea5..d4cb592ffaed 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -46,7 +46,7 @@ #include "devices-imx27.h" #include "devices.h" -static int eukrea_cpuimx27_pins[] = { +static const int eukrea_cpuimx27_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -259,7 +259,7 @@ static void __init eukrea_cpuimx27_init(void) i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - imx27_add_i2c_imx1(&cpuimx27_i2c1_data); + imx27_add_imx_i2c(1, &cpuimx27_i2c1_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c new file mode 100644 index 000000000000..21904f32740c --- /dev/null +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -0,0 +1,263 @@ +/* + * mach-imx27_visstrim_m10.c + * + * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com> + * + * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> +#include <mach/mmc.h> +#include <mach/iomux.h> +#include <mach/mxc_ehci.h> + +#include "devices-imx27.h" +#include "devices.h" + +#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) +#define SDHC1_IRQ IRQ_GPIOB(25) + +static const int visstrim_m10_pins[] __initconst = { + /* UART1 (console) */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* SDHC1 */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* Both I2Cs */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* USB OTG */ + OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PC9_PF_USBOTG_DATA0, + PC11_PF_USBOTG_DATA1, + PC10_PF_USBOTG_DATA2, + PC13_PF_USBOTG_DATA3, + PC12_PF_USBOTG_DATA4, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PE25_PF_USBOTG_DATA7, + PE24_PF_USBOTG_CLK, + PE2_PF_USBOTG_DIR, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PB23_PF_USB_PWR, + PB24_PF_USB_OC, +}; + +/* GPIOs used as events for applications */ +static struct gpio_keys_button visstrim_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_RESTART, + .gpio = (GPIO_PORTC + 15), + .desc = "Default config", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_RECORD, + .gpio = (GPIO_PORTF + 14), + .desc = "Record", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_STOP, + .gpio = (GPIO_PORTF + 13), + .desc = "Stop", + .active_low = 0, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = { + .buttons = visstrim_gpio_keys, + .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), +}; + +static struct platform_device visstrim_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &visstrim_gpio_keys_platform_data, + }, +}; + +/* Visstrim_SM10 has a microSD slot connected to sdhc1 */ +static int visstrim_m10_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING, + "mmc-detect", data); + return ret; +} + +static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(SDHC1_IRQ, data); +} + +static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = { + .init = visstrim_m10_sdhc1_init, + .exit = visstrim_m10_sdhc1_exit, +}; + +/* Visstrim_SM10 NOR flash */ +static struct physmap_flash_data visstrim_m10_flash_data = { + .width = 2, +}; + +static struct resource visstrim_m10_flash_resource = { + .start = 0xc0000000, + .end = 0xc0000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device visstrim_m10_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &visstrim_m10_flash_data, + }, + .num_resources = 1, + .resource = &visstrim_m10_flash_resource, +}; + +static struct platform_device *platform_devices[] __initdata = { + &visstrim_gpio_keys_device, + &visstrim_m10_nor_mtd_device, + &mxc_fec_device, +}; + +/* Visstrim_M10 uses UART0 as console */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* I2C */ +static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = { + .bitrate = 100000, +}; + +static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { + .gpio_base = 240, /* After MX27 internal GPIOs */ + .invert = 0, +}; + +static struct i2c_board_info visstrim_m10_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9555", 0x20), + .platform_data = &visstrim_m10_pca9555_pdata, + }, +}; + +/* USB OTG */ +static int otg_phy_init(struct platform_device *pdev) +{ + gpio_set_value(OTG_PHY_CS_GPIO, 0); + return 0; +} + +static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = { + .init = otg_phy_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + +static void __init visstrim_m10_board_init(void) +{ + int ret; + + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, + ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); + if (ret) + pr_err("Failed to setup pins (%d)\n", ret); + + imx27_add_imx_uart0(&uart_pdata); + + i2c_register_board_info(0, visstrim_m10_i2c_devices, + ARRAY_SIZE(visstrim_m10_i2c_devices)); + imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); + imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); + mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata); + mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init visstrim_m10_timer_init(void) +{ + mx27_clocks_init((unsigned long)25000000); +} + +static struct sys_timer visstrim_m10_timer = { + .init = visstrim_m10_timer_init, +}; + +MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mx27_init_irq, + .init_machine = visstrim_m10_board_init, + .timer = &visstrim_m10_timer, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 22a2b5d91213..67480b639e2c 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -27,7 +27,7 @@ #include "devices-imx27.h" #include "devices.h" -static unsigned int mx27lite_pins[] = { +static const int mx27lite_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 77a760cfadc0..85e2877572b5 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -32,7 +32,7 @@ #include "devices-imx1.h" #include "devices.h" -static int mx1ads_pins[] = { +static const int mx1ads_pins[] __initconst = { /* UART1 */ PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, @@ -131,7 +131,7 @@ static void __init mx1ads_init(void) i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); - imx1_add_i2c_imx(&mx1ads_i2c_data); + imx1_add_imx_i2c(&mx1ads_i2c_data); } static void __init mx1ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 96d7f8189f32..7f021e6f6acd 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -67,7 +67,7 @@ #define MX21ADS_IO_LED4_ON 0x4000 #define MX21ADS_IO_LED3_ON 0x8000 -static unsigned int mx21ads_pins[] = { +static const int mx21ads_pins[] __initconst = { /* CS8900A */ (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11), diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index e66ffaa1c26c..9f6832d5f7f7 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -33,7 +33,7 @@ #include "devices-imx27.h" #include "devices.h" -static unsigned int mx27pdk_pins[] = { +static const int mx27pdk_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 9c77da98a10e..1a33288787a8 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -66,7 +66,7 @@ /* to determine the correct external crystal reference */ #define CKIH_27MHZ_BIT_SET (1 << 3) -static unsigned int mx27ads_pins[] = { +static const int mx27ads_pins[] __initconst = { /* UART0 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -308,7 +308,7 @@ static void __init mx27ads_board_init(void) /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, mx27ads_i2c_devices, ARRAY_SIZE(mx27ads_i2c_devices)); - imx27_add_i2c_imx1(&mx27ads_i2c1_data); + imx27_add_imx_i2c(1, &mx27ads_i2c1_data); mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index a3a1e452d4c5..58fb0d653981 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -37,7 +37,7 @@ #include "devices-imx27.h" #include "devices.h" -static unsigned int mxt_td60_pins[] __initdata = { +static const int mxt_td60_pins[] __initconst = { /* UART0 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -255,8 +255,8 @@ static void __init mxt_td60_board_init(void) i2c_register_board_info(1, mxt_td60_i2c2_devices, ARRAY_SIZE(mxt_td60_i2c2_devices)); - imx27_add_i2c_imx0(&mxt_td60_i2c0_data); - imx27_add_i2c_imx1(&mxt_td60_i2c1_data); + imx27_add_imx_i2c(0, &mxt_td60_i2c0_data); + imx27_add_imx_i2c(1, &mxt_td60_i2c1_data); mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 23c9e1f37b9c..1247ce9dabad 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -38,7 +38,6 @@ #include <mach/iomux-mx27.h> #include <asm/mach/time.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include <mach/mxc_nand.h> #include <mach/irqs.h> #include <mach/mmc.h> @@ -55,7 +54,7 @@ #define SPI1_SS1 (GPIO_PORTD + 27) #define SD2_CD (GPIO_PORTC + 29) -static int pca100_pins[] = { +static const int pca100_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -193,11 +192,9 @@ static struct i2c_board_info pca100_i2c_devices[] = { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), - .type = "pcf8563" + I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("lm75", 0x4a), - .type = "lm75" } }; @@ -252,7 +249,7 @@ static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) msleep(2); } -static struct imx_ssi_platform_data pca100_ssi_pdata = { +static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = { .ac97_reset = pca100_ac97_cold_reset, .ac97_warm_reset = pca100_ac97_warm_reset, .flags = IMX_SSI_USE_AC97, @@ -389,7 +386,7 @@ static void __init pca100_init(void) if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); - mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata); + imx27_add_imx_ssi(0, &pca100_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); @@ -401,7 +398,7 @@ static void __init pca100_init(void) i2c_register_board_info(1, pca100_i2c_devices, ARRAY_SIZE(pca100_i2c_devices)); - imx27_add_i2c_imx1(&pca100_i2c1_data); + imx27_add_imx_i2c(1, &pca100_i2c1_data); #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 9212e8f37001..3fbed661f612 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -43,7 +43,7 @@ #include "devices-imx27.h" #include "devices.h" -static int pcm038_pins[] = { +static const int pcm038_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -257,7 +257,7 @@ static struct regulator_init_data cam_data = { .consumer_supplies = cam_consumers, }; -struct mc13783_regulator_init_data pcm038_regulators[] = { +static struct mc13783_regulator_init_data pcm038_regulators[] = { { .id = MC13783_REGU_VCAM, .init_data = &cam_data, @@ -309,7 +309,7 @@ static void __init pcm038_init(void) i2c_register_board_info(1, pcm038_i2c_devices, ARRAY_SIZE(pcm038_i2c_devices)); - imx27_add_i2c_imx1(&pcm038_i2c1_data); + imx27_add_imx_i2c(1, &pcm038_i2c1_data); /* PE18 for user-LED D40 */ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index 88bf0d1e26e6..fb2e5f3d37f6 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -95,7 +95,7 @@ static struct platform_device dm9000x_device = { } }; -static int mxc_uart1_pins[] = { +static const int mxc_uart1_pins[] = { PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, PC11_PF_UART1_TXD, diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index f490a406d57e..9110d9cca7a2 100644 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c @@ -31,7 +31,7 @@ #include "devices.h" -static int pcm970_pins[] = { +static const int pcm970_pins[] __initconst = { /* SDHC */ PB4_PF_SD2_D0, PB5_PF_SD2_D1, @@ -200,7 +200,7 @@ static struct resource pcm970_sja1000_resources[] = { }, }; -struct sja1000_platform_data pcm970_sja1000_platform_data = { +static struct sja1000_platform_data pcm970_sja1000_platform_data = { .osc_freq = 16000000, .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, .cdr = CDR_CBP, diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h index e87ab0b37bdd..e056e7cf5645 100644 --- a/arch/arm/mach-integrator/include/mach/vmalloc.h +++ b/arch/arm/mach-integrator/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 47264a76eeb3..f09ffef4cda8 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -18,6 +18,7 @@ config ARCH_MSM7X30 select MSM_VIC select CPU_V7 select MSM_REMOTE_SPINLOCK_DEKKERS + select MSM_GPIOMUX config ARCH_QSD8X50 bool "QSD8X50" @@ -26,6 +27,7 @@ config ARCH_QSD8X50 select MSM_VIC select CPU_V7 select MSM_REMOTE_SPINLOCK_LDREX + select MSM_GPIOMUX endchoice config MSM_SOC_REV_A @@ -106,4 +108,9 @@ config MSM_SMD_PKG3 config MSM_SMD bool +config MSM_GPIOMUX + bool + +config MSM_V2_TLMM + bool endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 704610648a25..c95d19a9045d 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -3,7 +3,6 @@ obj-y += io.o idle.o timer.o dma.o obj-y += vreg.o obj-y += acpuclock-arm11.o obj-y += clock.o clock-pcom.o -obj-y += gpio.o ifdef CONFIG_MSM_VIC obj-y += irq-vic.o @@ -20,3 +19,9 @@ obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o +obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o +obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o +obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o +ifndef CONFIG_MSM_V2_TLMM +obj-y += gpio.o +endif diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index e32981928c77..74abb74b4983 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -39,22 +39,6 @@ extern struct sys_timer msm_timer; -#ifdef CONFIG_SERIAL_MSM_CONSOLE -static struct msm_gpio uart2_config_data[] = { - { GPIO_CFG(49, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"}, - { GPIO_CFG(50, 2, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"}, - { GPIO_CFG(51, 2, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"}, - { GPIO_CFG(52, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"}, -}; - -static void msm7x30_init_uart2(void) -{ - msm_gpios_request_enable(uart2_config_data, - ARRAY_SIZE(uart2_config_data)); - -} -#endif - static struct platform_device *devices[] __initdata = { #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) &msm_device_uart2, @@ -70,10 +54,6 @@ static void __init msm7x30_init_irq(void) static void __init msm7x30_init(void) { platform_add_devices(devices, ARRAY_SIZE(devices)); -#ifdef CONFIG_SERIAL_MSM_CONSOLE - msm7x30_init_uart2(); -#endif - } static void __init msm7x30_map_io(void) diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index e3cc80792d6c..9e4cf2441122 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -35,20 +35,48 @@ extern struct sys_timer msm_timer; -static struct msm_gpio uart3_config_data[] = { - { GPIO_CFG(86, 1, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"}, - { GPIO_CFG(87, 1, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"}, +static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300; +static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156; + +/* Leave smc91x resources empty here, as we'll fill them in + * at run-time: they vary from board to board, and the true + * configuration won't be known until boot. + */ +static struct resource smc91x_resources[] __initdata = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, }; -static struct platform_device *devices[] __initdata = { - &msm_device_uart3, +static struct platform_device smc91x_device __initdata = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, }; -static void msm8x50_init_uart3(void) +static int __init msm_init_smc91x(void) { - msm_gpios_request_enable(uart3_config_data, - ARRAY_SIZE(uart3_config_data)); + if (machine_is_qsd8x50_surf()) { + smc91x_resources[0].start = qsd8x50_surf_smc91x_base; + smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff; + smc91x_resources[1].start = + gpio_to_irq(qsd8x50_surf_smc91x_gpio); + smc91x_resources[1].end = + gpio_to_irq(qsd8x50_surf_smc91x_gpio); + platform_device_register(&smc91x_device); + } + + return 0; } +module_init(msm_init_smc91x); + +static struct platform_device *devices[] __initdata = { + &msm_device_uart3, +}; static void __init qsd8x50_map_io(void) { @@ -64,7 +92,6 @@ static void __init qsd8x50_init_irq(void) static void __init qsd8x50_init(void) { - msm8x50_init_uart3(); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c index bc32c845c7b0..33051b509e88 100644 --- a/arch/arm/mach-msm/gpio.c +++ b/arch/arm/mach-msm/gpio.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-msm/gpio.c * * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009, Code Aurora Forum. All rights reserved. + * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -14,72 +14,363 @@ * */ +#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> #include <linux/module.h> -#include <mach/gpio.h> -#include "proc_comm.h" - -int gpio_tlmm_config(unsigned config, unsigned disable) -{ - return msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, &disable); -} -EXPORT_SYMBOL(gpio_tlmm_config); - -int msm_gpios_enable(const struct msm_gpio *table, int size) -{ - int rc; - int i; - const struct msm_gpio *g; - for (i = 0; i < size; i++) { - g = table + i; - rc = gpio_tlmm_config(g->gpio_cfg, GPIO_ENABLE); - if (rc) { - pr_err("gpio_tlmm_config(0x%08x, GPIO_ENABLE)" - " <%s> failed: %d\n", - g->gpio_cfg, g->label ?: "?", rc); - pr_err("pin %d func %d dir %d pull %d drvstr %d\n", - GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg), - GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg), - GPIO_DRVSTR(g->gpio_cfg)); - goto err; - } +#include "gpio_hw.h" +#include "gpiomux.h" + +#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0) + +#define MSM_GPIO_BANK(bank, first, last) \ + { \ + .regs = { \ + .out = MSM_GPIO_OUT_##bank, \ + .in = MSM_GPIO_IN_##bank, \ + .int_status = MSM_GPIO_INT_STATUS_##bank, \ + .int_clear = MSM_GPIO_INT_CLEAR_##bank, \ + .int_en = MSM_GPIO_INT_EN_##bank, \ + .int_edge = MSM_GPIO_INT_EDGE_##bank, \ + .int_pos = MSM_GPIO_INT_POS_##bank, \ + .oe = MSM_GPIO_OE_##bank, \ + }, \ + .chip = { \ + .base = (first), \ + .ngpio = (last) - (first) + 1, \ + .get = msm_gpio_get, \ + .set = msm_gpio_set, \ + .direction_input = msm_gpio_direction_input, \ + .direction_output = msm_gpio_direction_output, \ + .to_irq = msm_gpio_to_irq, \ + .request = msm_gpio_request, \ + .free = msm_gpio_free, \ + } \ } + +#define MSM_GPIO_BROKEN_INT_CLEAR 1 + +struct msm_gpio_regs { + void __iomem *out; + void __iomem *in; + void __iomem *int_status; + void __iomem *int_clear; + void __iomem *int_en; + void __iomem *int_edge; + void __iomem *int_pos; + void __iomem *oe; +}; + +struct msm_gpio_chip { + spinlock_t lock; + struct gpio_chip chip; + struct msm_gpio_regs regs; +#if MSM_GPIO_BROKEN_INT_CLEAR + unsigned int_status_copy; +#endif + unsigned int both_edge_detect; + unsigned int int_enable[2]; /* 0: awake, 1: sleep */ +}; + +static int msm_gpio_write(struct msm_gpio_chip *msm_chip, + unsigned offset, unsigned on) +{ + unsigned mask = BIT(offset); + unsigned val; + + val = readl(msm_chip->regs.out); + if (on) + writel(val | mask, msm_chip->regs.out); + else + writel(val & ~mask, msm_chip->regs.out); return 0; -err: - msm_gpios_disable(table, i); - return rc; -} -EXPORT_SYMBOL(msm_gpios_enable); - -void msm_gpios_disable(const struct msm_gpio *table, int size) -{ - int rc; - int i; - const struct msm_gpio *g; - for (i = size-1; i >= 0; i--) { - g = table + i; - rc = gpio_tlmm_config(g->gpio_cfg, GPIO_DISABLE); - if (rc) { - pr_err("gpio_tlmm_config(0x%08x, GPIO_DISABLE)" - " <%s> failed: %d\n", - g->gpio_cfg, g->label ?: "?", rc); - pr_err("pin %d func %d dir %d pull %d drvstr %d\n", - GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg), - GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg), - GPIO_DRVSTR(g->gpio_cfg)); - } +} + +static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip) +{ + int loop_limit = 100; + unsigned pol, val, val2, intstat; + do { + val = readl(msm_chip->regs.in); + pol = readl(msm_chip->regs.int_pos); + pol = (pol & ~msm_chip->both_edge_detect) | + (~val & msm_chip->both_edge_detect); + writel(pol, msm_chip->regs.int_pos); + intstat = readl(msm_chip->regs.int_status); + val2 = readl(msm_chip->regs.in); + if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0) + return; + } while (loop_limit-- > 0); + printk(KERN_ERR "msm_gpio_update_both_edge_detect, " + "failed to reach stable state %x != %x\n", val, val2); +} + +static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip, + unsigned offset) +{ + unsigned bit = BIT(offset); + +#if MSM_GPIO_BROKEN_INT_CLEAR + /* Save interrupts that already triggered before we loose them. */ + /* Any interrupt that triggers between the read of int_status */ + /* and the write to int_clear will still be lost though. */ + msm_chip->int_status_copy |= readl(msm_chip->regs.int_status); + msm_chip->int_status_copy &= ~bit; +#endif + writel(bit, msm_chip->regs.int_clear); + msm_gpio_update_both_edge_detect(msm_chip); + return 0; +} + +static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct msm_gpio_chip *msm_chip; + unsigned long irq_flags; + + msm_chip = container_of(chip, struct msm_gpio_chip, chip); + spin_lock_irqsave(&msm_chip->lock, irq_flags); + writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); + return 0; +} + +static int +msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct msm_gpio_chip *msm_chip; + unsigned long irq_flags; + + msm_chip = container_of(chip, struct msm_gpio_chip, chip); + spin_lock_irqsave(&msm_chip->lock, irq_flags); + msm_gpio_write(msm_chip, offset, value); + writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); + return 0; +} + +static int msm_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct msm_gpio_chip *msm_chip; + + msm_chip = container_of(chip, struct msm_gpio_chip, chip); + return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0; +} + +static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct msm_gpio_chip *msm_chip; + unsigned long irq_flags; + + msm_chip = container_of(chip, struct msm_gpio_chip, chip); + spin_lock_irqsave(&msm_chip->lock, irq_flags); + msm_gpio_write(msm_chip, offset, value); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); +} + +static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return MSM_GPIO_TO_INT(chip->base + offset); +} + +#ifdef CONFIG_MSM_GPIOMUX +static int msm_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return msm_gpiomux_get(chip->base + offset); +} + +static void msm_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + msm_gpiomux_put(chip->base + offset); +} +#else +#define msm_gpio_request NULL +#define msm_gpio_free NULL +#endif + +struct msm_gpio_chip msm_gpio_chips[] = { +#if defined(CONFIG_ARCH_MSM7X00A) + MSM_GPIO_BANK(0, 0, 15), + MSM_GPIO_BANK(1, 16, 42), + MSM_GPIO_BANK(2, 43, 67), + MSM_GPIO_BANK(3, 68, 94), + MSM_GPIO_BANK(4, 95, 106), + MSM_GPIO_BANK(5, 107, 121), +#elif defined(CONFIG_ARCH_MSM7X25) || defined(CONFIG_ARCH_MSM7X27) + MSM_GPIO_BANK(0, 0, 15), + MSM_GPIO_BANK(1, 16, 42), + MSM_GPIO_BANK(2, 43, 67), + MSM_GPIO_BANK(3, 68, 94), + MSM_GPIO_BANK(4, 95, 106), + MSM_GPIO_BANK(5, 107, 132), +#elif defined(CONFIG_ARCH_MSM7X30) + MSM_GPIO_BANK(0, 0, 15), + MSM_GPIO_BANK(1, 16, 43), + MSM_GPIO_BANK(2, 44, 67), + MSM_GPIO_BANK(3, 68, 94), + MSM_GPIO_BANK(4, 95, 106), + MSM_GPIO_BANK(5, 107, 133), + MSM_GPIO_BANK(6, 134, 150), + MSM_GPIO_BANK(7, 151, 181), +#elif defined(CONFIG_ARCH_QSD8X50) + MSM_GPIO_BANK(0, 0, 15), + MSM_GPIO_BANK(1, 16, 42), + MSM_GPIO_BANK(2, 43, 67), + MSM_GPIO_BANK(3, 68, 94), + MSM_GPIO_BANK(4, 95, 103), + MSM_GPIO_BANK(5, 104, 121), + MSM_GPIO_BANK(6, 122, 152), + MSM_GPIO_BANK(7, 153, 164), +#endif +}; + +static void msm_gpio_irq_ack(unsigned int irq) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + spin_lock_irqsave(&msm_chip->lock, irq_flags); + msm_gpio_clear_detect_status(msm_chip, + irq - gpio_to_irq(msm_chip->chip.base)); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); +} + +static void msm_gpio_irq_mask(unsigned int irq) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + unsigned offset = irq - gpio_to_irq(msm_chip->chip.base); + + spin_lock_irqsave(&msm_chip->lock, irq_flags); + /* level triggered interrupts are also latched */ + if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) + msm_gpio_clear_detect_status(msm_chip, offset); + msm_chip->int_enable[0] &= ~BIT(offset); + writel(msm_chip->int_enable[0], msm_chip->regs.int_en); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); +} + +static void msm_gpio_irq_unmask(unsigned int irq) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + unsigned offset = irq - gpio_to_irq(msm_chip->chip.base); + + spin_lock_irqsave(&msm_chip->lock, irq_flags); + /* level triggered interrupts are also latched */ + if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) + msm_gpio_clear_detect_status(msm_chip, offset); + msm_chip->int_enable[0] |= BIT(offset); + writel(msm_chip->int_enable[0], msm_chip->regs.int_en); + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); +} + +static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + unsigned offset = irq - gpio_to_irq(msm_chip->chip.base); + + spin_lock_irqsave(&msm_chip->lock, irq_flags); + + if (on) + msm_chip->int_enable[1] |= BIT(offset); + else + msm_chip->int_enable[1] &= ~BIT(offset); + + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); + return 0; +} + +static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + unsigned long irq_flags; + struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq); + unsigned offset = irq - gpio_to_irq(msm_chip->chip.base); + unsigned val, mask = BIT(offset); + + spin_lock_irqsave(&msm_chip->lock, irq_flags); + val = readl(msm_chip->regs.int_edge); + if (flow_type & IRQ_TYPE_EDGE_BOTH) { + writel(val | mask, msm_chip->regs.int_edge); + irq_desc[irq].handle_irq = handle_edge_irq; + } else { + writel(val & ~mask, msm_chip->regs.int_edge); + irq_desc[irq].handle_irq = handle_level_irq; + } + if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { + msm_chip->both_edge_detect |= mask; + msm_gpio_update_both_edge_detect(msm_chip); + } else { + msm_chip->both_edge_detect &= ~mask; + val = readl(msm_chip->regs.int_pos); + if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) + writel(val | mask, msm_chip->regs.int_pos); + else + writel(val & ~mask, msm_chip->regs.int_pos); } + spin_unlock_irqrestore(&msm_chip->lock, irq_flags); + return 0; } -EXPORT_SYMBOL(msm_gpios_disable); -int msm_gpios_request_enable(const struct msm_gpio *table, int size) +static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { - int rc = msm_gpios_enable(table, size); - return rc; + int i, j, mask; + unsigned val; + + for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) { + struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i]; + val = readl(msm_chip->regs.int_status); + val &= msm_chip->int_enable[0]; + while (val) { + mask = val & -val; + j = fls(mask) - 1; + /* printk("%s %08x %08x bit %d gpio %d irq %d\n", + __func__, v, m, j, msm_chip->chip.start + j, + FIRST_GPIO_IRQ + msm_chip->chip.start + j); */ + val &= ~mask; + generic_handle_irq(FIRST_GPIO_IRQ + + msm_chip->chip.base + j); + } + } + desc->chip->ack(irq); } -EXPORT_SYMBOL(msm_gpios_request_enable); -void msm_gpios_disable_free(const struct msm_gpio *table, int size) +static struct irq_chip msm_gpio_irq_chip = { + .name = "msmgpio", + .ack = msm_gpio_irq_ack, + .mask = msm_gpio_irq_mask, + .unmask = msm_gpio_irq_unmask, + .set_wake = msm_gpio_irq_set_wake, + .set_type = msm_gpio_irq_set_type, +}; + +static int __init msm_init_gpio(void) { - msm_gpios_disable(table, size); + int i, j = 0; + + for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) { + if (i - FIRST_GPIO_IRQ >= + msm_gpio_chips[j].chip.base + + msm_gpio_chips[j].chip.ngpio) + j++; + set_irq_chip_data(i, &msm_gpio_chips[j]); + set_irq_chip(i, &msm_gpio_irq_chip); + set_irq_handler(i, handle_edge_irq); + set_irq_flags(i, IRQF_VALID); + } + + for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) { + spin_lock_init(&msm_gpio_chips[i].lock); + writel(0, msm_gpio_chips[i].regs.int_en); + gpiochip_add(&msm_gpio_chips[i].chip); + } + + set_irq_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler); + set_irq_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler); + set_irq_wake(INT_GPIO_GROUP1, 1); + set_irq_wake(INT_GPIO_GROUP2, 2); + return 0; } -EXPORT_SYMBOL(msm_gpios_disable_free); + +postcore_initcall(msm_init_gpio); diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h new file mode 100644 index 000000000000..6b5066038baa --- /dev/null +++ b/arch/arm/mach-msm/gpio_hw.h @@ -0,0 +1,278 @@ +/* arch/arm/mach-msm/gpio_hw.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H +#define __ARCH_ARM_MACH_MSM_GPIO_HW_H + +#include <mach/msm_iomap.h> + +/* see 80-VA736-2 Rev C pp 695-751 +** +** These are actually the *shadow* gpio registers, since the +** real ones (which allow full access) are only available to the +** ARM9 side of the world. +** +** Since the _BASE need to be page-aligned when we're mapping them +** to virtual addresses, adjust for the additional offset in these +** macros. +*/ + +#if defined(CONFIG_ARCH_MSM7X30) +#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off)) +#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off)) +#else +#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off)) +#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off)) +#endif + +#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\ + defined(CONFIG_ARCH_MSM7X27) + +/* output value */ +#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ +#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */ +#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */ +#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ +#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */ +#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 107-121 */ + +/* same pin map as above, output enable */ +#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10) +#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) +#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14) +#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18) +#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C) +#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54) + +/* same pin map as above, input read */ +#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34) +#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) +#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38) +#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C) +#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40) +#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44) + +/* same pin map as above, 1=edge 0=level interrup */ +#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60) +#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) +#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64) +#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68) +#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C) +#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0) + +/* same pin map as above, 1=positive 0=negative */ +#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70) +#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) +#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74) +#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78) +#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C) +#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC) + +/* same pin map as above, interrupt enable */ +#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80) +#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) +#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84) +#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88) +#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C) +#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8) + +/* same pin map as above, write 1 to clear interrupt */ +#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90) +#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) +#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94) +#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98) +#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C) +#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4) + +/* same pin map as above, 1=interrupt pending */ +#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0) +#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) +#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4) +#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8) +#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC) +#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0) + +#endif + +#if defined(CONFIG_ARCH_QSD8X50) +/* output value */ +#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ +#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */ +#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */ +#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ +#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 103-95 */ +#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x10) /* gpio 121-104 */ +#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0x14) /* gpio 152-122 */ +#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x18) /* gpio 164-153 */ + +/* same pin map as above, output enable */ +#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x20) +#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) +#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x24) +#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x28) +#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x2C) +#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x30) +#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0x34) +#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x38) + +/* same pin map as above, input read */ +#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x50) +#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) +#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x54) +#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x58) +#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x5C) +#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x60) +#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0x64) +#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x68) + +/* same pin map as above, 1=edge 0=level interrup */ +#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x70) +#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) +#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x74) +#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x78) +#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x7C) +#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0x80) +#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0x84) +#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x88) + +/* same pin map as above, 1=positive 0=negative */ +#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x90) +#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) +#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x94) +#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x98) +#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x9C) +#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xA0) +#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xA4) +#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0xA8) + +/* same pin map as above, interrupt enable */ +#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0xB0) +#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) +#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0xB4) +#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0xB8) +#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0xBC) +#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xC0) +#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xC4) +#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0xC8) + +/* same pin map as above, write 1 to clear interrupt */ +#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0xD0) +#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) +#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0xD4) +#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0xD8) +#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0xDC) +#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xE0) +#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xE4) +#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0xE8) + +/* same pin map as above, 1=interrupt pending */ +#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xF0) +#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) +#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xF4) +#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xF8) +#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xFC) +#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0x100) +#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0x104) +#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x108) + +#endif + +#if defined(CONFIG_ARCH_MSM7X30) + +/* output value */ +#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ +#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 43-16 */ +#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-44 */ +#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ +#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */ +#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 133-107 */ +#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0xC4) /* gpio 150-134 */ +#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x214) /* gpio 181-151 */ + +/* same pin map as above, output enable */ +#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10) +#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) +#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14) +#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18) +#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C) +#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54) +#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0xC8) +#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x218) + +/* same pin map as above, input read */ +#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34) +#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) +#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38) +#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C) +#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40) +#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44) +#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0xCC) +#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x21C) + +/* same pin map as above, 1=edge 0=level interrup */ +#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60) +#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) +#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64) +#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68) +#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C) +#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0) +#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0xD0) +#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x240) + +/* same pin map as above, 1=positive 0=negative */ +#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70) +#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) +#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74) +#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78) +#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C) +#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC) +#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xD4) +#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0x228) + +/* same pin map as above, interrupt enable */ +#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80) +#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) +#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84) +#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88) +#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C) +#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8) +#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xD8) +#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0x22C) + +/* same pin map as above, write 1 to clear interrupt */ +#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90) +#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) +#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94) +#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98) +#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C) +#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4) +#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xDC) +#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0x230) + +/* same pin map as above, 1=interrupt pending */ +#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0) +#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) +#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4) +#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8) +#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC) +#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0) +#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0xE0) +#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x234) + +#endif + +#endif diff --git a/arch/arm/mach-msm/gpiomux-7x30.c b/arch/arm/mach-msm/gpiomux-7x30.c new file mode 100644 index 000000000000..6ce41c5241a5 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-7x30.c @@ -0,0 +1,38 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include "gpiomux.h" + +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { +#ifdef CONFIG_SERIAL_MSM_CONSOLE + [49] = { /* UART2 RFR */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [50] = { /* UART2 CTS */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [51] = { /* UART2 RX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, + [52] = { /* UART2 TX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_2 | GPIOMUX_VALID, + }, +#endif +}; diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c new file mode 100644 index 000000000000..4406e0f4ae95 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-8x50.c @@ -0,0 +1,28 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include "gpiomux.h" + +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { + [86] = { /* UART3 RX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_1 | GPIOMUX_VALID, + }, + [87] = { /* UART3 TX */ + .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | + GPIOMUX_FUNC_1 | GPIOMUX_VALID, + }, +}; diff --git a/arch/arm/mach-msm/gpiomux-8x60.c b/arch/arm/mach-msm/gpiomux-8x60.c new file mode 100644 index 000000000000..7b380b31bd0e --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-8x60.c @@ -0,0 +1,19 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include "gpiomux.h" + +struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {}; diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c new file mode 100644 index 000000000000..27de2abd7144 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-v1.c @@ -0,0 +1,33 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include <linux/kernel.h> +#include "gpiomux.h" +#include "proc_comm.h" + +void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) +{ + unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | + ((gpio & 0x3ff) << 4); + unsigned tlmm_disable = 0; + int rc; + + rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, + &tlmm_config, &tlmm_disable); + if (rc) + pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", + __func__, rc, tlmm_config, tlmm_disable); +} diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h new file mode 100644 index 000000000000..71d86feba450 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-v1.h @@ -0,0 +1,67 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H +#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H + +#if defined(CONFIG_ARCH_MSM7X30) +#define GPIOMUX_NGPIOS 182 +#elif defined(CONFIG_ARCH_QSD8X50) +#define GPIOMUX_NGPIOS 165 +#else +#define GPIOMUX_NGPIOS 133 +#endif + +typedef u32 gpiomux_config_t; + +enum { + GPIOMUX_DRV_2MA = 0UL << 17, + GPIOMUX_DRV_4MA = 1UL << 17, + GPIOMUX_DRV_6MA = 2UL << 17, + GPIOMUX_DRV_8MA = 3UL << 17, + GPIOMUX_DRV_10MA = 4UL << 17, + GPIOMUX_DRV_12MA = 5UL << 17, + GPIOMUX_DRV_14MA = 6UL << 17, + GPIOMUX_DRV_16MA = 7UL << 17, +}; + +enum { + GPIOMUX_FUNC_GPIO = 0UL, + GPIOMUX_FUNC_1 = 1UL, + GPIOMUX_FUNC_2 = 2UL, + GPIOMUX_FUNC_3 = 3UL, + GPIOMUX_FUNC_4 = 4UL, + GPIOMUX_FUNC_5 = 5UL, + GPIOMUX_FUNC_6 = 6UL, + GPIOMUX_FUNC_7 = 7UL, + GPIOMUX_FUNC_8 = 8UL, + GPIOMUX_FUNC_9 = 9UL, + GPIOMUX_FUNC_A = 10UL, + GPIOMUX_FUNC_B = 11UL, + GPIOMUX_FUNC_C = 12UL, + GPIOMUX_FUNC_D = 13UL, + GPIOMUX_FUNC_E = 14UL, + GPIOMUX_FUNC_F = 15UL, +}; + +enum { + GPIOMUX_PULL_NONE = 0UL << 15, + GPIOMUX_PULL_DOWN = 1UL << 15, + GPIOMUX_PULL_KEEPER = 2UL << 15, + GPIOMUX_PULL_UP = 3UL << 15, +}; + +#endif diff --git a/arch/arm/mach-msm/gpiomux-v2.c b/arch/arm/mach-msm/gpiomux-v2.c new file mode 100644 index 000000000000..273396d2b127 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-v2.c @@ -0,0 +1,25 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include <linux/io.h> +#include <mach/msm_iomap.h> +#include "gpiomux.h" + +void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) +{ + writel(val & ~GPIOMUX_CTL_MASK, + MSM_TLMM_BASE + 0x1000 + (0x10 * gpio)); +} diff --git a/arch/arm/mach-msm/gpiomux-v2.h b/arch/arm/mach-msm/gpiomux-v2.h new file mode 100644 index 000000000000..3bf10e7f0381 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux-v2.h @@ -0,0 +1,61 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H +#define __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H + +#define GPIOMUX_NGPIOS 173 + +typedef u16 gpiomux_config_t; + +enum { + GPIOMUX_DRV_2MA = 0UL << 6, + GPIOMUX_DRV_4MA = 1UL << 6, + GPIOMUX_DRV_6MA = 2UL << 6, + GPIOMUX_DRV_8MA = 3UL << 6, + GPIOMUX_DRV_10MA = 4UL << 6, + GPIOMUX_DRV_12MA = 5UL << 6, + GPIOMUX_DRV_14MA = 6UL << 6, + GPIOMUX_DRV_16MA = 7UL << 6, +}; + +enum { + GPIOMUX_FUNC_GPIO = 0UL << 2, + GPIOMUX_FUNC_1 = 1UL << 2, + GPIOMUX_FUNC_2 = 2UL << 2, + GPIOMUX_FUNC_3 = 3UL << 2, + GPIOMUX_FUNC_4 = 4UL << 2, + GPIOMUX_FUNC_5 = 5UL << 2, + GPIOMUX_FUNC_6 = 6UL << 2, + GPIOMUX_FUNC_7 = 7UL << 2, + GPIOMUX_FUNC_8 = 8UL << 2, + GPIOMUX_FUNC_9 = 9UL << 2, + GPIOMUX_FUNC_A = 10UL << 2, + GPIOMUX_FUNC_B = 11UL << 2, + GPIOMUX_FUNC_C = 12UL << 2, + GPIOMUX_FUNC_D = 13UL << 2, + GPIOMUX_FUNC_E = 14UL << 2, + GPIOMUX_FUNC_F = 15UL << 2, +}; + +enum { + GPIOMUX_PULL_NONE = 0UL, + GPIOMUX_PULL_DOWN = 1UL, + GPIOMUX_PULL_KEEPER = 2UL, + GPIOMUX_PULL_UP = 3UL, +}; + +#endif diff --git a/arch/arm/mach-msm/gpiomux.c b/arch/arm/mach-msm/gpiomux.c new file mode 100644 index 000000000000..53af21abd155 --- /dev/null +++ b/arch/arm/mach-msm/gpiomux.c @@ -0,0 +1,96 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#include <linux/module.h> +#include <linux/spinlock.h> +#include "gpiomux.h" + +static DEFINE_SPINLOCK(gpiomux_lock); + +int msm_gpiomux_write(unsigned gpio, + gpiomux_config_t active, + gpiomux_config_t suspended) +{ + struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; + unsigned long irq_flags; + gpiomux_config_t setting; + + if (gpio >= GPIOMUX_NGPIOS) + return -EINVAL; + + spin_lock_irqsave(&gpiomux_lock, irq_flags); + + if (active & GPIOMUX_VALID) + cfg->active = active; + + if (suspended & GPIOMUX_VALID) + cfg->suspended = suspended; + + setting = cfg->ref ? active : suspended; + if (setting & GPIOMUX_VALID) + __msm_gpiomux_write(gpio, setting); + + spin_unlock_irqrestore(&gpiomux_lock, irq_flags); + return 0; +} +EXPORT_SYMBOL(msm_gpiomux_write); + +int msm_gpiomux_get(unsigned gpio) +{ + struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; + unsigned long irq_flags; + + if (gpio >= GPIOMUX_NGPIOS) + return -EINVAL; + + spin_lock_irqsave(&gpiomux_lock, irq_flags); + if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID) + __msm_gpiomux_write(gpio, cfg->active); + spin_unlock_irqrestore(&gpiomux_lock, irq_flags); + return 0; +} +EXPORT_SYMBOL(msm_gpiomux_get); + +int msm_gpiomux_put(unsigned gpio) +{ + struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; + unsigned long irq_flags; + + if (gpio >= GPIOMUX_NGPIOS) + return -EINVAL; + + spin_lock_irqsave(&gpiomux_lock, irq_flags); + BUG_ON(cfg->ref == 0); + if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID) + __msm_gpiomux_write(gpio, cfg->suspended); + spin_unlock_irqrestore(&gpiomux_lock, irq_flags); + return 0; +} +EXPORT_SYMBOL(msm_gpiomux_put); + +static int __init gpiomux_init(void) +{ + unsigned n; + + for (n = 0; n < GPIOMUX_NGPIOS; ++n) { + msm_gpiomux_configs[n].ref = 0; + if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID)) + continue; + __msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended); + } + return 0; +} +postcore_initcall(gpiomux_init); diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h new file mode 100644 index 000000000000..b178d9cb742f --- /dev/null +++ b/arch/arm/mach-msm/gpiomux.h @@ -0,0 +1,114 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H +#define __ARCH_ARM_MACH_MSM_GPIOMUX_H + +#include <linux/bitops.h> +#include <linux/errno.h> + +#if defined(CONFIG_MSM_V2_TLMM) +#include "gpiomux-v2.h" +#else +#include "gpiomux-v1.h" +#endif + +/** + * struct msm_gpiomux_config: gpiomux settings for one gpio line. + * + * A complete gpiomux config is the bitwise-or of a drive-strength, + * function, and pull. For functions other than GPIO, the OE + * is hard-wired according to the function. For GPIO mode, + * OE is controlled by gpiolib. + * + * Available settings differ by target; see the gpiomux header + * specific to your target arch for available configurations. + * + * @active: The configuration to be installed when the line is + * active, or its reference count is > 0. + * @suspended: The configuration to be installed when the line + * is suspended, or its reference count is 0. + * @ref: The reference count of the line. For internal use of + * the gpiomux framework only. + */ +struct msm_gpiomux_config { + gpiomux_config_t active; + gpiomux_config_t suspended; + unsigned ref; +}; + +/** + * @GPIOMUX_VALID: If set, the config field contains 'good data'. + * The absence of this bit will prevent the gpiomux + * system from applying the configuration under all + * circumstances. + */ +enum { + GPIOMUX_VALID = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1), + GPIOMUX_CTL_MASK = GPIOMUX_VALID, +}; + +#ifdef CONFIG_MSM_GPIOMUX + +/* Each architecture must provide its own instance of this table. + * To avoid having gpiomux manage any given gpio, one or both of + * the entries can avoid setting GPIOMUX_VALID - the absence + * of that flag will prevent the configuration from being applied + * during state transitions. + */ +extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; + +/* Increment a gpio's reference count, possibly activating the line. */ +int __must_check msm_gpiomux_get(unsigned gpio); + +/* Decrement a gpio's reference count, possibly suspending the line. */ +int msm_gpiomux_put(unsigned gpio); + +/* Install a new configuration to the gpio line. To avoid overwriting + * a configuration, leave the VALID bit out. + */ +int msm_gpiomux_write(unsigned gpio, + gpiomux_config_t active, + gpiomux_config_t suspended); + +/* Architecture-internal function for use by the framework only. + * This function can assume the following: + * - the gpio value has passed a bounds-check + * - the gpiomux spinlock has been obtained + * + * This function is not for public consumption. External users + * should use msm_gpiomux_write. + */ +void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); +#else +static inline int __must_check msm_gpiomux_get(unsigned gpio) +{ + return -ENOSYS; +} + +static inline int msm_gpiomux_put(unsigned gpio) +{ + return -ENOSYS; +} + +static inline int msm_gpiomux_write(unsigned gpio, + gpiomux_config_t active, + gpiomux_config_t suspended) +{ + return -ENOSYS; +} +#endif +#endif diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h index 83e47c0d5c2e..36ad50d3bfaa 100644 --- a/arch/arm/mach-msm/include/mach/gpio.h +++ b/arch/arm/mach-msm/include/mach/gpio.h @@ -23,127 +23,4 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq -/** - * struct msm_gpio - GPIO pin description - * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config() - * @label - textual label - * - * Usually, GPIO's are operated by sets. - * This struct accumulate all GPIO information in single source - * and facilitete group operations provided by msm_gpios_xxx() - */ -struct msm_gpio { - u32 gpio_cfg; - const char *label; -}; - -/** - * msm_gpios_request_enable() - request and enable set of GPIOs - * - * Request and configure set of GPIO's - * In case of error, all operations rolled back. - * Return error code. - * - * @table: GPIO table - * @size: number of entries in @table - */ -int msm_gpios_request_enable(const struct msm_gpio *table, int size); - -/** - * msm_gpios_disable_free() - disable and free set of GPIOs - * - * @table: GPIO table - * @size: number of entries in @table - */ -void msm_gpios_disable_free(const struct msm_gpio *table, int size); - -/** - * msm_gpios_request() - request set of GPIOs - * In case of error, all operations rolled back. - * Return error code. - * - * @table: GPIO table - * @size: number of entries in @table - */ -int msm_gpios_request(const struct msm_gpio *table, int size); - -/** - * msm_gpios_free() - free set of GPIOs - * - * @table: GPIO table - * @size: number of entries in @table - */ -void msm_gpios_free(const struct msm_gpio *table, int size); - -/** - * msm_gpios_enable() - enable set of GPIOs - * In case of error, all operations rolled back. - * Return error code. - * - * @table: GPIO table - * @size: number of entries in @table - */ -int msm_gpios_enable(const struct msm_gpio *table, int size); - -/** - * msm_gpios_disable() - disable set of GPIOs - * - * @table: GPIO table - * @size: number of entries in @table - */ -void msm_gpios_disable(const struct msm_gpio *table, int size); - -/* GPIO TLMM (Top Level Multiplexing) Definitions */ - -/* GPIO TLMM: Function -- GPIO specific */ - -/* GPIO TLMM: Direction */ -enum { - GPIO_INPUT, - GPIO_OUTPUT, -}; - -/* GPIO TLMM: Pullup/Pulldown */ -enum { - GPIO_NO_PULL, - GPIO_PULL_DOWN, - GPIO_KEEPER, - GPIO_PULL_UP, -}; - -/* GPIO TLMM: Drive Strength */ -enum { - GPIO_2MA, - GPIO_4MA, - GPIO_6MA, - GPIO_8MA, - GPIO_10MA, - GPIO_12MA, - GPIO_14MA, - GPIO_16MA, -}; - -enum { - GPIO_ENABLE, - GPIO_DISABLE, -}; - -#define GPIO_CFG(gpio, func, dir, pull, drvstr) \ - ((((gpio) & 0x3FF) << 4) | \ - ((func) & 0xf) | \ - (((dir) & 0x1) << 14) | \ - (((pull) & 0x3) << 15) | \ - (((drvstr) & 0xF) << 17)) - -/** - * extract GPIO pin from bit-field used for gpio_tlmm_config - */ -#define GPIO_PIN(gpio_cfg) (((gpio_cfg) >> 4) & 0x3ff) -#define GPIO_FUNC(gpio_cfg) (((gpio_cfg) >> 0) & 0xf) -#define GPIO_DIR(gpio_cfg) (((gpio_cfg) >> 14) & 0x1) -#define GPIO_PULL(gpio_cfg) (((gpio_cfg) >> 15) & 0x3) -#define GPIO_DRVSTR(gpio_cfg) (((gpio_cfg) >> 17) & 0xf) - -int gpio_tlmm_config(unsigned config, unsigned disable); - #endif /* __ASM_ARCH_MSM_GPIO_H */ diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h new file mode 100644 index 000000000000..17209f78d4a8 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * The MSM peripherals are spread all over across 768MB of physical + * space, which makes just having a simple IO_ADDRESS macro to slide + * them into the right virtual location rough. Instead, we will + * provide a master phys->virt mapping for peripherals here. + * + */ + +#ifndef __ASM_ARCH_MSM_IOMAP_8X60_H +#define __ASM_ARCH_MSM_IOMAP_8X60_H + +/* Physical base address and size of peripherals. + * Ordered by the virtual base addresses they will be mapped at. + * + * MSM_VIC_BASE must be an value that can be loaded via a "mov" + * instruction, otherwise entry-macro.S will not compile. + * + * If you add or remove entries here, you'll want to edit the + * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your + * changes. + * + */ + +#define MSM_TLMM_BASE IOMEM(0xF0004000) +#define MSM_TLMM_PHYS 0x00800000 +#define MSM_TLMM_SIZE SZ_16K + +#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index e6b1821cc4ea..39c8fbcf33e7 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -47,6 +47,8 @@ #include "msm_iomap-7x30.h" #elif defined(CONFIG_ARCH_QSD8X50) #include "msm_iomap-8x50.h" +#elif defined(CONFIG_ARCH_MSM8X60) +#include "msm_iomap-8x60.h" #else #include "msm_iomap-7x00.h" #endif diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h index 05f81fd8623c..31a32ad062dc 100644 --- a/arch/arm/mach-msm/include/mach/vmalloc.h +++ b/arch/arm/mach-msm/include/mach/vmalloc.h @@ -16,7 +16,7 @@ #ifndef __ASM_ARCH_MSM_VMALLOC_H #define __ASM_ARCH_MSM_VMALLOC_H -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 #endif diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig index c71a7bc19284..aa57e35ce3cd 100644 --- a/arch/arm/mach-mx25/Kconfig +++ b/arch/arm/mach-mx25/Kconfig @@ -12,6 +12,8 @@ config MACH_EUKREA_CPUIMX25 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_ESDHC select MXC_ULPI if USB_ULPI choice @@ -20,8 +22,8 @@ choice default MACH_EUKREA_MBIMXSD25_BASEBOARD config MACH_EUKREA_MBIMXSD25_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool + bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_IMX_SSI help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 40c7cc41cee3..25f37a9a0422 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -139,6 +139,16 @@ static unsigned long get_rate_lcdc(struct clk *clk) return get_rate_per(7); } +static unsigned long get_rate_esdhc1(struct clk *clk) +{ + return get_rate_per(3); +} + +static unsigned long get_rate_esdhc2(struct clk *clk) +{ + return get_rate_per(4); +} + static unsigned long get_rate_csi(struct clk *clk) { return get_rate_per(0); @@ -213,6 +223,12 @@ DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1, NULL, NULL); +DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0, 3, get_rate_esdhc1, NULL, + &esdhc1_ahb_clk); +DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2, NULL, NULL); +DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0, 4, get_rate_esdhc2, NULL, + &esdhc2_ahb_clk); DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk); @@ -238,6 +254,10 @@ DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk); DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk); DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk); +DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGCR1, 13, get_rate_esdhc1, NULL, + &esdhc1_per_clk); +DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGCR1, 14, get_rate_esdhc2, NULL, + &esdhc2_per_clk); DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL); DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk); DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL); @@ -261,9 +281,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) - _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk) _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk) _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk) @@ -279,6 +299,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk) + _REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk) _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h index d86a7c3ca8b0..fa7e05088e25 100644 --- a/arch/arm/mach-mx25/devices-imx25.h +++ b/arch/arm/mach-mx25/devices-imx25.h @@ -14,30 +14,38 @@ #define imx25_add_flexcan1(pdata) \ imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata) -#define imx25_add_imx_i2c0(pdata) \ - imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata) -#define imx25_add_imx_i2c1(pdata) \ - imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata) -#define imx25_add_imx_i2c2(pdata) \ - imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata) +extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst; +#define imx25_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata) +#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata) +#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata) +#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata) -#define imx25_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata) -#define imx25_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata) -#define imx25_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata) -#define imx25_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata) -#define imx25_add_imx_uart4(pdata) \ - imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata) +extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst; +#define imx25_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst; +#define imx25_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata) +#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata) +#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata) +#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata) +#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata) +#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata) + +extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst; #define imx25_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) + +extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst; +#define imx25_add_spi_imx(id, pdata) \ + imx_add_spi_imx(&imx25_spi_imx_data[id], pdata) +#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) +#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) +#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) -#define imx25_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata) -#define imx25_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata) -#define imx25_add_spi_imx2(pdata) \ - imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata) +#define imx25_add_esdhc0(pdata) \ + imx_add_esdhc(0, MX25_ESDHC1_BASE_ADDR, SZ_16K, MX25_INT_MMC_SDHC1, pdata) +#define imx25_add_esdhc1(pdata) \ + imx_add_esdhc(1, MX25_ESDHC2_BASE_ADDR, SZ_16K, MX25_INT_MMC_SDHC2, pdata) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 3468eb15b236..bc19e8cc26df 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -305,44 +305,6 @@ struct platform_device mx25_kpp_device = { .resource = mx25_kpp_resources, }; -static struct resource imx_ssi_resources0[] = { - { - .start = MX25_SSI1_BASE_ADDR, - .end = MX25_SSI1_BASE_ADDR + 0x3fff, - .flags = IORESOURCE_MEM, - }, { - .start = MX25_INT_SSI1, - .end = MX25_INT_SSI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource imx_ssi_resources1[] = { - { - .start = MX25_SSI2_BASE_ADDR, - .end = MX25_SSI2_BASE_ADDR + 0x3fff, - .flags = IORESOURCE_MEM - }, { - .start = MX25_INT_SSI2, - .end = MX25_INT_SSI2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_ssi_device0 = { - .name = "imx-ssi", - .id = 0, - .num_resources = ARRAY_SIZE(imx_ssi_resources0), - .resource = imx_ssi_resources0, -}; - -struct platform_device imx_ssi_device1 = { - .name = "imx-ssi", - .id = 1, - .num_resources = ARRAY_SIZE(imx_ssi_resources1), - .resource = imx_ssi_resources1, -}; - static struct resource mx25_csi_resources[] = { { .start = MX25_CSI_BASE_ADDR, diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index 4aceb68e35a7..f6e6d3a5f640 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -11,6 +11,4 @@ extern struct platform_device mx25_rtc_device; extern struct platform_device mx25_fb_device; extern struct platform_device mxc_wdt; extern struct platform_device mx25_kpp_device; -extern struct platform_device imx_ssi_device0; -extern struct platform_device imx_ssi_device1; extern struct platform_device mx25_csi_device; diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c index 4aaadc753d3e..c1fe048c445e 100644 --- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c @@ -34,7 +34,6 @@ #include <mach/mx25.h> #include <mach/imx-uart.h> #include <mach/imxfb.h> -#include <mach/ssi.h> #include <mach/audmux.h> #include "devices-imx25.h" @@ -90,6 +89,9 @@ static struct pad_desc eukrea_mbimxsd_pads[] = { MX25_PAD_KPP_COL2__AUD5_TXC, MX25_PAD_KPP_COL1__AUD5_RXD, MX25_PAD_KPP_COL0__AUD5_TXD, + /* CAN */ + MX25_PAD_GPIO_D__CAN2_RX, + MX25_PAD_GPIO_C__CAN2_TX, }; #define GPIO_LED1 83 @@ -205,7 +207,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { }, }; -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { +static const +struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; @@ -239,7 +242,10 @@ void __init eukrea_mbimxsd25_baseboard_init(void) imx25_add_imx_uart1(&uart_pdata); mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata); - mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata); + imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); + + imx25_add_flexcan1(NULL); + imx25_add_esdhc0(NULL); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 85beece802aa..c3e0882e043b 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -9,6 +9,7 @@ config ARCH_MX35 bool select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 + select HAVE_EPIT comment "MX3 platforms:" @@ -16,6 +17,7 @@ config MACH_MX31ADS bool "Support MX31ADS platforms" select ARCH_MX31 select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART default y help @@ -117,6 +119,7 @@ config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select ARCH_MX35 select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_FLEXCAN @@ -140,6 +143,7 @@ config MACH_MX35_3DS bool "Support MX35PDK platform" select ARCH_MX35 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND default n help Include support for MX35PDK platform. This includes specific @@ -159,6 +163,8 @@ config MACH_EUKREA_CPUIMX35 select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_ESDHC select MXC_ULPI if USB_ULPI help Include support for Eukrea CPUIMX35 platform. This includes @@ -170,8 +176,8 @@ choice default MACH_EUKREA_MBIMXSD35_BASEBOARD config MACH_EUKREA_MBIMXSD35_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool + bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_IMX_SSI help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c index 9a9eb6de6127..18e98f1d4de0 100644 --- a/arch/arm/mach-mx3/clock-imx31.c +++ b/arch/arm/mach-mx3/clock-imx31.c @@ -525,9 +525,9 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "emi", emi_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) - _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 7a62e744a8b0..708c2b36cf06 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -364,8 +364,8 @@ DEFINE_CLOCK(cspi2_clk, 1, CCM_CGR0, 12, get_rate_ipg, NULL); DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL); DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL); DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL); -DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg_per, NULL); -DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg_per, NULL); +DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg, NULL); +DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg, NULL); DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL); DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL); DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL); @@ -451,13 +451,13 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk) _REGISTER_CLOCK(NULL, "ect", ect_clk) _REGISTER_CLOCK(NULL, "edio", edio_clk) _REGISTER_CLOCK(NULL, "emi", emi_clk) - _REGISTER_CLOCK(NULL, "epit", epit1_clk) - _REGISTER_CLOCK(NULL, "epit", epit2_clk) + _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk) + _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk) _REGISTER_CLOCK(NULL, "esai", esai_clk) _REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk) _REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk) @@ -535,8 +535,13 @@ int __init mx35_clocks_init() __raw_writel(cgr2, CCM_BASE + CCM_CGR2); __raw_writel(cgr3, CCM_BASE + CCM_CGR3); +#ifdef CONFIG_MXC_USE_EPIT + epit_timer_init(&epit1_clk, + MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); +#else mxc_timer_init(&gpt_clk, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); +#endif return 0; } diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h index 3b1a44a20585..de9598590eba 100644 --- a/arch/arm/mach-mx3/devices-imx31.h +++ b/arch/arm/mach-mx3/devices-imx31.h @@ -9,30 +9,33 @@ #include <mach/mx31.h> #include <mach/devices-common.h> -#define imx31_add_imx_i2c0(pdata) \ - imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata) -#define imx31_add_imx_i2c1(pdata) \ - imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata) -#define imx31_add_imx_i2c2(pdata) \ - imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata) +extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst; +#define imx31_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata) +#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata) +#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata) +#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata) -#define imx31_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata) -#define imx31_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata) -#define imx31_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata) -#define imx31_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata) -#define imx31_add_imx_uart4(pdata) \ - imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata) +extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst; +#define imx31_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst; +#define imx31_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata) +#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata) +#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata) +#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata) +#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata) +#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) + +extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst; #define imx31_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) -#define imx31_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata) -#define imx31_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata) -#define imx31_add_spi_imx2(pdata) \ - imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata) +extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst; +#define imx31_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx31_cspi_data[id], pdata) +#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata) +#define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata) +#define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h index f6a431a4c3d2..56404de907f9 100644 --- a/arch/arm/mach-mx3/devices-imx35.h +++ b/arch/arm/mach-mx3/devices-imx35.h @@ -14,24 +14,30 @@ #define imx35_add_flexcan1(pdata) \ imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata) -#define imx35_add_imx_i2c0(pdata) \ - imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata) -#define imx35_add_imx_i2c1(pdata) \ - imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata) -#define imx35_add_imx_i2c2(pdata) \ - imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata) +extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst; +#define imx35_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata) +#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata) +#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata) +#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata) -#define imx35_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata) -#define imx35_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata) -#define imx35_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata) +extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst; +#define imx35_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst; +#define imx35_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata) +#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata) +#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata) +#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) + +extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst; #define imx35_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) -#define imx35_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata) -#define imx35_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata) +extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst; +#define imx35_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx35_cspi_data[id], pdata) +#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata) +#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index a4fd1a26fc91..87a9a21457b9 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -302,44 +302,6 @@ struct platform_device mxc_fec_device = { }; #endif -static struct resource imx_ssi_resources0[] = { - { - .start = SSI1_BASE_ADDR, - .end = SSI1_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_SSI1, - .end = MX31_INT_SSI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource imx_ssi_resources1[] = { - { - .start = SSI2_BASE_ADDR, - .end = SSI2_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM - }, { - .start = MX31_INT_SSI2, - .end = MX31_INT_SSI2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_ssi_device0 = { - .name = "imx-ssi", - .id = 0, - .num_resources = ARRAY_SIZE(imx_ssi_resources0), - .resource = imx_ssi_resources0, -}; - -struct platform_device imx_ssi_device1 = { - .name = "imx-ssi", - .id = 1, - .num_resources = ARRAY_SIZE(imx_ssi_resources1), - .resource = imx_ssi_resources1, -}; - static struct resource imx_wdt_resources[] = { { .flags = IORESOURCE_MEM, @@ -410,10 +372,6 @@ static int __init mx3_devices_init(void) mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff; mxc_usbh1_resources[1].start = MXC_INT_USBHS; mxc_usbh1_resources[1].end = MXC_INT_USBHS; - imx_ssi_resources0[1].start = MX35_INT_SSI1; - imx_ssi_resources0[1].end = MX35_INT_SSI1; - imx_ssi_resources1[1].start = MX35_INT_SSI2; - imx_ssi_resources1[1].end = MX35_INT_SSI2; imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index e5535234839f..2a69465bc542 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -10,9 +10,6 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -extern struct platform_device imx_ssi_device0; -extern struct platform_device imx_ssi_device1; -extern struct platform_device imx_ssi_device1; extern struct platform_device imx_wdt_device0; extern struct platform_device imx_rtc_device0; extern struct platform_device imx_kpp_device; diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index f8f15e3ac7a0..886959906fbc 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -43,7 +43,6 @@ #include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include "devices-imx35.h" #include "devices.h" @@ -120,6 +119,16 @@ static struct pad_desc eukrea_mbimxsd_pads[] = { MX35_PAD_STXD4__AUDMUX_AUD4_TXD, MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, MX35_PAD_SCK4__AUDMUX_AUD4_TXC, + /* CAN2 */ + MX35_PAD_TX5_RX0__CAN2_TXCAN, + MX35_PAD_TX4_RX1__CAN2_RXCAN, + /* SDCARD */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; #define GPIO_LED1 (2 * 32 + 29) @@ -206,7 +215,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { }, }; -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { +static const +struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; @@ -242,7 +252,10 @@ void __init eukrea_mbimxsd35_baseboard_init(void) mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); - mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata); + imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); + + imx35_add_flexcan1(NULL); + imx35_add_esdhc0(NULL); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 2a4f8b781ba4..ea0a85f1c9aa 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -31,6 +31,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/fsl_devices.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -53,39 +54,16 @@ static const struct imxuart_platform_data uart_pdata __initconst = { }; static const struct imxi2c_platform_data -eukrea_cpuimx35_i2c0_data __initconst = { - .bitrate = 50000, + eukrea_cpuimx35_i2c0_data __initconst = { + .bitrate = 100000, }; -#define TSC2007_IRQGPIO (2 * 32 + 2) -static int ts_get_pendown_state(void) -{ - int val = 0; - gpio_free(TSC2007_IRQGPIO); - gpio_request(TSC2007_IRQGPIO, NULL); - gpio_direction_input(TSC2007_IRQGPIO); - - val = gpio_get_value(TSC2007_IRQGPIO); - - gpio_free(TSC2007_IRQGPIO); - gpio_request(TSC2007_IRQGPIO, NULL); - - return val ? 0 : 1; -} - -static int ts_init(void) -{ - gpio_request(TSC2007_IRQGPIO, NULL); - return 0; -} - static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, - .get_pendown_state = ts_get_pendown_state, - .init_platform_hw = ts_init, }; +#define TSC2007_IRQGPIO (2 * 32 + 2) static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), @@ -135,7 +113,7 @@ static struct pad_desc eukrea_cpuimx35_pads[] = { }; static const struct mxc_nand_platform_data -eukrea_cpuimx35_nand_board_info __initconst = { + eukrea_cpuimx35_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, .flash_bbt = 1, diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 94b3e7c42404..96cedc4a47f5 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -517,7 +517,7 @@ static unsigned int ssi_pins[] = { static void mxc_init_audio(void) { - mxc_register_device(&imx_ssi_device0, NULL); + imx31_add_imx_ssi(0, NULL); mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); } diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index 1c30d7212f17..1dd7baae4507 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -1,5 +1,6 @@ /* * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix * * Author: Fabio Estevam <fabio.estevam@freescale.com> * @@ -27,6 +28,8 @@ #include <linux/gpio.h> #include <linux/fsl_devices.h> +#include <linux/mtd/physmap.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -35,6 +38,7 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> +#include <mach/mxc_ehci.h> #include "devices-imx35.h" #include "devices.h" @@ -43,8 +47,35 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static struct physmap_flash_data mx35pdk_flash_data = { + .width = 2, +}; + +static struct resource mx35pdk_flash_resource = { + .start = MX35_CS0_BASE_ADDR, + .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx35pdk_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx35pdk_flash_data, + }, + .resource = &mx35pdk_flash_resource, + .num_resources = 1, +}; + +static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + static struct platform_device *devices[] __initdata = { &mxc_fec_device, + &mx35pdk_flash, }; static struct pad_desc mx35pdk_pads[] = { @@ -75,14 +106,24 @@ static struct pad_desc mx35pdk_pads[] = { /* USBOTG */ MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + /* USBH1 */ + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, }; /* OTG config */ -static struct fsl_usb2_platform_data usb_pdata = { +static struct fsl_usb2_platform_data usb_otg_pdata = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; +/* USB HOST config */ +static struct mxc_usbh_platform_data usb_host_pdata = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY, +}; + /* * Board specific initialization. */ @@ -94,7 +135,11 @@ static void __init mxc_board_init(void) imx35_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata); + + mxc_register_device(&mxc_usbh1, &usb_host_pdata); + + imx35_add_mxc_nand(&mx35pdk_nand_board_info); } static void __init mx35pdk_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 28886f0e62f9..dcc216bb3952 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -42,7 +42,6 @@ #include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include "devices-imx35.h" #include "devices.h" @@ -293,7 +292,7 @@ err1: mdelay(1); } -static struct imx_ssi_platform_data pcm043_ssi_pdata = { +static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = { .ac97_reset = pcm043_ac97_cold_reset, .ac97_warm_reset = pcm043_ac97_warm_reset, .flags = IMX_SSI_USE_AC97, @@ -361,7 +360,7 @@ static void __init mxc_board_init(void) imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&pcm037_nand_board_info); - mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata); + imx35_add_imx_ssi(0, &pcm043_ssi_pdata); imx35_add_imx_uart1(&uart_pdata); diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 20e48c0195c4..b4ffc531a82c 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -110,6 +110,24 @@ void __init mx35_init_irq(void) static int mxc_init_l2x0(void) { void __iomem *l2x0_base; + void __iomem *clkctl_base; +/* + * First of all, we must repair broken chip settings. There are some + * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These + * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. + * Workaraound is to setup the correct register setting prior enabling the + * L2 cache. This should not hurt already working CPUs, as they are using the + * same value + */ +#define L2_MEM_VAL 0x10 + + clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); + if (clkctl_base != NULL) { + writel(0x00000515, clkctl_base + L2_MEM_VAL); + iounmap(clkctl_base); + } else { + pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); + } l2x0_base = ioremap(L2CC_BASE_ADDR, 4096); if (IS_ERR(l2x0_base)) { diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 0848db5dd364..3a4c3b32a6e7 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -5,11 +5,14 @@ config ARCH_MX51 default y select MXC_TZIC select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 comment "MX5 platforms:" config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its @@ -17,6 +20,8 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD help Include support for MX51PDK (3DS) platform. This includes specific @@ -24,6 +29,8 @@ config MACH_MX51_3DS config MACH_EUKREA_CPUIMX51 bool "Support Eukrea CPUIMX51 module" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART help Include support for Eukrea CPUIMX51 platform. This includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 623607a20f57..a6c09c7ff728 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -28,9 +28,7 @@ #include <mach/eukrea-baseboards.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> #include <mach/mxc_ehci.h> #include <asm/irq.h> @@ -39,6 +37,7 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "devices-imx51.h" #include "devices.h" #define CPUIMX51_USBH1_STP (0*32 + 27) @@ -148,11 +147,12 @@ static struct pad_desc eukrea_cpuimx51_pads[] = { MX51_PAD_USBH1_STP__USBH1_STP, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = { +static const +struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = { .bitrate = 100000, }; @@ -239,7 +239,7 @@ static void __init eukrea_cpuimx51_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq"); gpio_direction_input(CPUIMX51_QUARTA_GPIO); gpio_free(CPUIMX51_QUARTA_GPIO); @@ -255,7 +255,7 @@ static void __init eukrea_cpuimx51_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data); + imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data); i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices, ARRAY_SIZE(eukrea_cpuimx51_i2c_devices)); diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index f95c2fd94667..ed08a2352a1a 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -13,6 +13,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -21,12 +22,13 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx51.h> -#include <mach/imx-uart.h> #include <mach/3ds_debugboard.h> +#include "devices-imx51.h" #include "devices.h" #define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6) +#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) static struct pad_desc mx51_3ds_pads[] = { /* UART1 */ @@ -61,19 +63,25 @@ static struct pad_desc mx51_3ds_pads[] = { MX51_PAD_KEY_COL3__KEY_COL3, MX51_PAD_KEY_COL4__KEY_COL4, MX51_PAD_KEY_COL5__KEY_COL5, + + /* eCSPI2 */ + MX51_PAD_NANDF_RB2__ECSPI2_SCLK, + MX51_PAD_NANDF_RB3__ECSPI2_MISO, + MX51_PAD_NANDF_D15__ECSPI2_MOSI, + MX51_PAD_NANDF_D12__GPIO_3_28, }; /* Serial ports */ #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static inline void mxc_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) @@ -127,6 +135,26 @@ static inline void mxc_init_keypad(void) } #endif +static int mx51_3ds_spi2_cs[] = { + MXC_SPI_CS(0), + MX51_3DS_ECSPI2_CS, +}; + +static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = { + .chipselect = mx51_3ds_spi2_cs, + .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs), +}; + +static struct spi_board_info mx51_3ds_spi_nor_device[] = { + { + .modalias = "m25p80", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .mode = SPI_MODE_0, + .platform_data = NULL,}, +}; + /* * Board specific initialization. */ @@ -136,6 +164,10 @@ static void __init mxc_board_init(void) ARRAY_SIZE(mx51_3ds_pads)); mxc_init_imx_uart(); + imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata); + spi_register_board_info(mx51_3ds_spi_nor_device, + ARRAY_SIZE(mx51_3ds_spi_nor_device)); + if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT)) printk(KERN_WARNING "Init of the debugboard failed, all " "devices on the board are unusable.\n"); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 6e384d92e625..7c0b6618a164 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -17,12 +17,11 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/fsl_devices.h> +#include <linux/fec.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> #include <mach/mxc_ehci.h> #include <asm/irq.h> @@ -31,11 +30,13 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "devices-imx51.h" #include "devices.h" #define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ #define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ -#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */ +#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */ +#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */ /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -93,19 +94,41 @@ static struct pad_desc mx51babbage_pads[] = { /* USB HUB reset line*/ MX51_PAD_GPIO_1_7__GPIO_1_7, + + /* FEC */ + MX51_PAD_EIM_EB2__FEC_MDIO, + MX51_PAD_EIM_EB3__FEC_RDAT1, + MX51_PAD_EIM_CS2__FEC_RDAT2, + MX51_PAD_EIM_CS3__FEC_RDAT3, + MX51_PAD_EIM_CS4__FEC_RX_ER, + MX51_PAD_EIM_CS5__FEC_CRS, + MX51_PAD_NANDF_RB2__FEC_COL, + MX51_PAD_NANDF_RB3__FEC_RXCLK, + MX51_PAD_NANDF_RB6__FEC_RDAT0, + MX51_PAD_NANDF_RB7__FEC_TDAT0, + MX51_PAD_NANDF_CS2__FEC_TX_ER, + MX51_PAD_NANDF_CS3__FEC_MDC, + MX51_PAD_NANDF_CS4__FEC_TDAT1, + MX51_PAD_NANDF_CS5__FEC_TDAT2, + MX51_PAD_NANDF_CS6__FEC_TDAT3, + MX51_PAD_NANDF_CS7__FEC_TX_EN, + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, + + /* FEC PHY reset line */ + MX51_PAD_EIM_A20__GPIO_2_14, }; /* Serial ports */ #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static inline void mxc_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) @@ -113,7 +136,7 @@ static inline void mxc_init_imx_uart(void) } #endif /* SERIAL_IMX */ -static struct imxi2c_platform_data babbage_i2c_data = { +static const struct imxi2c_platform_data babbage_i2c_data __initconst = { .bitrate = 100000, }; @@ -171,6 +194,22 @@ static inline void babbage_usbhub_reset(void) gpio_set_value(BABBAGE_USB_HUB_RESET, 1); } +static inline void babbage_fec_reset(void) +{ + int ret; + + /* reset FEC PHY */ + ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); + return; + } + gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 0); + msleep(1); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); +} + /* This function is board specific as the bit mask for the plldiv will also be different for other Freescale SoCs, thus a common bitmask is not possible and cannot get place in /plat-mxc/ehci.c.*/ @@ -178,7 +217,7 @@ static int initialize_otg_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -196,7 +235,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -250,10 +289,11 @@ static void __init mxc_board_init(void) mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); mxc_init_imx_uart(); + babbage_fec_reset(); platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data); - mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data); + imx51_add_imx_i2c(0, &babbage_i2c_data); + imx51_add_imx_i2c(1, &babbage_i2c_data); mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data); if (otg_mode_host) @@ -283,7 +323,7 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ .phys_io = MX51_AIPS1_BASE_ADDR, .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 57c10a9926cc..e6c17d78189c 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -41,34 +41,36 @@ static struct clk usboh3_clk; #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ -static int _clk_ccgr_enable(struct clk *clk) +static void _clk_ccgr_setclk(struct clk *clk, unsigned mode) { - u32 reg; + u32 reg = __raw_readl(clk->enable_reg); + + reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); + reg |= mode << clk->enable_shift; - reg = __raw_readl(clk->enable_reg); - reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift; __raw_writel(reg, clk->enable_reg); +} +static int _clk_ccgr_enable(struct clk *clk) +{ + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON); return 0; } static void _clk_ccgr_disable(struct clk *clk) { - u32 reg; - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF); +} +static int _clk_ccgr_enable_inrun(struct clk *clk) +{ + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); + return 0; } static void _clk_ccgr_disable_inwait(struct clk *clk) { - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); - reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); } /* @@ -571,6 +573,64 @@ static int _clk_uart_set_parent(struct clk *clk, struct clk *parent) return 0; } +#define clk_nfc_set_parent NULL + +static unsigned long clk_nfc_get_rate(struct clk *clk) +{ + unsigned long rate; + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >> + MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1; + rate = clk_get_rate(clk->parent) / div; + WARN_ON(rate == 0); + return rate; +} + +static unsigned long clk_nfc_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + unsigned long parent_rate = clk_get_rate(clk->parent); + + if (!rate) + return -EINVAL; + + div = parent_rate / rate; + + if (parent_rate % rate) + div++; + + if (div > 8) + return -EINVAL; + + return parent_rate / div; + +} + +static int clk_nfc_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + + div = clk_get_rate(clk->parent) / rate; + if (div == 0) + div++; + if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8)) + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); + + while (__raw_readl(MXC_CCM_CDHIPR) & + MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){ + } + + return 0; +} + static unsigned long clk_usboh3_get_rate(struct clk *clk) { u32 reg, prediv, podf; @@ -620,6 +680,17 @@ static unsigned long get_ckih2_reference_clock_rate(struct clk *clk) return ckih2_reference; } +static unsigned long clk_emi_slow_get_rate(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >> + MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1; + + return clk_get_rate(clk->parent) / div; +} + /* External high frequency clock */ static struct clk ckih_clk = { .get_rate = get_high_reference_clock_rate, @@ -762,45 +833,105 @@ static struct clk kpp_clk = { .id = 0, }; -#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ +static struct clk emi_slow_clk = { + .parent = &pll2_sw_clk, + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable_inwait, + .get_rate = clk_emi_slow_get_rate, +}; + +#define DEFINE_CLOCK1(name, i, er, es, pfx, p, s) \ static struct clk name = { \ .id = i, \ .enable_reg = er, \ .enable_shift = es, \ - .get_rate = gr, \ - .set_rate = sr, \ + .get_rate = pfx##_get_rate, \ + .set_rate = pfx##_set_rate, \ + .round_rate = pfx##_round_rate, \ + .set_parent = pfx##_set_parent, \ .enable = _clk_ccgr_enable, \ .disable = _clk_ccgr_disable, \ .parent = p, \ .secondary = s, \ } -/* DEFINE_CLOCK(name, id, enable_reg, enable_shift, - get_rate, set_rate, parent, secondary); */ +/* eCSPI */ +static unsigned long clk_ecspi_get_rate(struct clk *clk) +{ + u32 reg, pred, podf; + + reg = __raw_readl(MXC_CCM_CSCDR2); + + pred = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) >> + MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET; + podf = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) >> + MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET; + + return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), + (pred + 1) * (podf + 1)); +} + +static int clk_ecspi_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk ecspi_main_clk = { + .parent = &pll3_sw_clk, + .get_rate = clk_ecspi_get_rate, + .set_parent = clk_ecspi_set_parent, +}; + +#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .set_rate = sr, \ + .enable = e, \ + .disable = d, \ + .parent = p, \ + .secondary = s, \ + } + +#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ + DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s) /* Shared peripheral bus arbiter */ DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET, NULL, NULL, &ipg_clk, NULL); /* UART */ -DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, - NULL, NULL, &uart_root_clk, NULL); -DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, - NULL, NULL, &uart_root_clk, NULL); -DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, - NULL, NULL, &uart_root_clk, NULL); DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, &uart_root_clk, &uart1_ipg_clk); +DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &uart_root_clk, &uart2_ipg_clk); +DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &uart_root_clk, &uart3_ipg_clk); /* GPT */ -DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, - NULL, NULL, &ipg_clk, NULL); DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_clk, &gpt_ipg_clk); /* I2C */ DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET, @@ -814,6 +945,38 @@ DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, NULL, NULL, &ipg_clk, NULL); +/* NFC */ +DEFINE_CLOCK1(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET, + clk_nfc, &emi_slow_clk, NULL); + +/* SSI */ +DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk); +DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk); + +/* eCSPI */ +DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, + &ipg_clk, &spba_clk); +DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk); +DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, + &ipg_clk, &aips_tz2_clk); +DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET, + NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk); + +/* CSPI */ +DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_clk, &aips_tz2_clk); +DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET, + NULL, NULL, &ipg_clk, &cspi_ipg_clk); + #define _REGISTER_CLOCK(d, n, c) \ { \ .dev_id = d, \ @@ -837,6 +1000,15 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk) + _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK(NULL, "ckih", ckih_clk) + _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk) + _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk) + _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) + _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) + _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) }; static void clk_tree_init(void) diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 2d37785e3857..eaacb6e9b5d0 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -70,6 +70,25 @@ int mx51_revision(void) } EXPORT_SYMBOL(mx51_revision); +#ifdef CONFIG_NEON + +/* + * All versions of the silicon before Rev. 3 have broken NEON implementations. + * Dependent on link order - so the assumption is that vfp_init is called + * before us. + */ +static int __init mx51_neon_fixup(void) +{ + if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) { + elf_hwcap &= ~HWCAP_NEON; + pr_info("Turning off NEON support, detected broken NEON implementation\n"); + } + return 0; +} + +late_initcall(mx51_neon_fixup); +#endif + static int __init post_cpu_init(void) { unsigned int reg; diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h new file mode 100644 index 000000000000..41d93c3d7d0b --- /dev/null +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx51.h> +#include <mach/devices-common.h> + +extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst; +#define imx51_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata) + +extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst; +#define imx51_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst; +#define imx51_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata) + +extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst; +#define imx51_add_mxc_nand(pdata) \ + imx_add_mxc_nand(&imx51_mxc_nand_data, pdata) + +extern const struct imx_spi_imx_data imx51_cspi_data __initconst; +#define imx51_add_cspi(pdata) \ + imx_add_spi_imx(&imx51_cspi_data, pdata) + +extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst; +#define imx51_add_ecspi(id, pdata) \ + imx_add_spi_imx(&imx51_ecspi_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 1920ff4963b2..5f40082d9e61 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -17,63 +17,6 @@ #include <mach/imx-uart.h> #include <mach/irqs.h> -static struct resource uart0[] = { - { - .start = MX51_UART1_BASE_ADDR, - .end = MX51_UART1_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART1, - .end = MX51_MXC_INT_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = MX51_UART2_BASE_ADDR, - .end = MX51_UART2_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART2, - .end = MX51_MXC_INT_UART2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = MX51_UART3_BASE_ADDR, - .end = MX51_UART3_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART3, - .end = MX51_MXC_INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - static struct resource mxc_fec_resources[] = { { .start = MX51_MXC_FEC_BASE_ADDR, @@ -93,44 +36,6 @@ struct platform_device mxc_fec_device = { .resource = mxc_fec_resources, }; -static struct resource mxc_i2c0_resources[] = { - { - .start = MX51_I2C1_BASE_ADDR, - .end = MX51_I2C1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_I2C1, - .end = MX51_MXC_INT_I2C1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c0_resources), - .resource = mxc_i2c0_resources, -}; - -static struct resource mxc_i2c1_resources[] = { - { - .start = MX51_I2C2_BASE_ADDR, - .end = MX51_I2C2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_I2C2, - .end = MX51_MXC_INT_I2C2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c1_resources), - .resource = mxc_i2c1_resources, -}; - static struct resource mxc_hsi2c_resources[] = { { .start = MX51_HSI2C_DMA_BASE_ADDR, diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h index e509cfaad1d4..67a6d6910530 100644 --- a/arch/arm/mach-mx5/devices.h +++ b/arch/arm/mach-mx5/devices.h @@ -1,12 +1,7 @@ -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; extern struct platform_device mxc_fec_device; extern struct platform_device mxc_usbdr_host_device; extern struct platform_device mxc_usbh1_device; extern struct platform_device mxc_usbdr_udc_device; extern struct platform_device mxc_wdt; -extern struct platform_device mxc_i2c_device0; -extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_hsi2c_device; extern struct platform_device mxc_keypad_device; diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c index ffa93d1d6ef8..d0e417ce2c08 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c @@ -30,6 +30,7 @@ #include <asm/mach/arch.h> +#include "devices-imx51.h" #include "devices.h" #define MBIMX51_TSC2007_GPIO (2*32 + 30) @@ -114,7 +115,7 @@ static struct pad_desc mbimx51_pads[] = { MX51_PAD_KEY_COL3__KEY_COL3, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -172,8 +173,8 @@ void __init eukrea_mbimx51_baseboard_init(void) mxc_iomux_v3_setup_multiple_pads(mbimx51_pads, ARRAY_SIZE(mbimx51_pads)); - mxc_register_device(&mxc_uart_device1, NULL); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(1, NULL); + imx51_add_imx_uart(2, &uart_pdata); gpio_request(MBIMX51_LED0, "LED0"); gpio_direction_output(MBIMX51_LED0, 1); diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h index 25d5cc676e0f..7cca3574308f 100644 --- a/arch/arm/mach-netx/include/mach/vmalloc.h +++ b/arch/arm/mach-netx/include/mach/vmalloc.h @@ -16,4 +16,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index facfaeb1ae5c..9a304d854e33 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_OMAP_MPU_TIMER) += time.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o # DSP obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 41992ab71961..248e8bb64b6a 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -16,9 +16,12 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/interrupt.h> +#include <linux/leds.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <media/soc_camera.h> + #include <asm/serial.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -32,6 +35,7 @@ #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> +#include <mach/camera.h> #include <mach/ams-delta-fiq.h> @@ -213,10 +217,56 @@ static struct platform_device ams_delta_led_device = { .id = -1 }; +static struct i2c_board_info ams_delta_camera_board_info[] = { + { + I2C_BOARD_INFO("ov6650", 0x60), + }, +}; + +#ifdef CONFIG_LEDS_TRIGGERS +DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger); + +static int ams_delta_camera_power(struct device *dev, int power) +{ + /* + * turn on camera LED + */ + if (power) + led_trigger_event(ams_delta_camera_led_trigger, LED_FULL); + else + led_trigger_event(ams_delta_camera_led_trigger, LED_OFF); + return 0; +} +#else +#define ams_delta_camera_power NULL +#endif + +static struct soc_camera_link __initdata ams_delta_iclink = { + .bus_id = 0, /* OMAP1 SoC camera bus */ + .i2c_adapter_id = 1, + .board_info = &ams_delta_camera_board_info[0], + .module_name = "ov6650", + .power = ams_delta_camera_power, +}; + +static struct platform_device ams_delta_camera_device = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &ams_delta_iclink, + }, +}; + +static struct omap1_cam_platform_data ams_delta_camera_platform_data = { + .camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */ + .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */ +}; + static struct platform_device *ams_delta_devices[] __initdata = { &ams_delta_kp_device, &ams_delta_lcd_device, &ams_delta_led_device, + &ams_delta_camera_device, }; static void __init ams_delta_init(void) @@ -225,6 +275,20 @@ static void __init ams_delta_init(void) omap_cfg_reg(UART1_TX); omap_cfg_reg(UART1_RTS); + /* parallel camera interface */ + omap_cfg_reg(H19_1610_CAM_EXCLK); + omap_cfg_reg(J15_1610_CAM_LCLK); + omap_cfg_reg(L18_1610_CAM_VS); + omap_cfg_reg(L15_1610_CAM_HS); + omap_cfg_reg(L19_1610_CAM_D0); + omap_cfg_reg(K14_1610_CAM_D1); + omap_cfg_reg(K15_1610_CAM_D2); + omap_cfg_reg(K19_1610_CAM_D3); + omap_cfg_reg(K18_1610_CAM_D4); + omap_cfg_reg(J14_1610_CAM_D5); + omap_cfg_reg(J19_1610_CAM_D6); + omap_cfg_reg(J18_1610_CAM_D7); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); omap_board_config = ams_delta_config; @@ -236,6 +300,11 @@ static void __init ams_delta_init(void) ams_delta_latch2_write(~0, 0); omap1_usb_init(&ams_delta_usb_config); + omap1_set_camera_info(&ams_delta_camera_platform_data); +#ifdef CONFIG_LEDS_TRIGGERS + led_trigger_register_simple("ams_delta_camera", + &ams_delta_camera_led_trigger); +#endif platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); #ifdef CONFIG_AMS_DELTA_FIQ diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index b30c4990744d..f2fc43d8382b 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -58,8 +58,7 @@ static struct omap_mmc_platform_data mmc1_data = { .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | - MMC_VDD_32_33 | MMC_VDD_33_34, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 54b0f063e263..2098525e7cc5 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -40,8 +40,7 @@ static struct omap_mmc_platform_data mmc1_data = { .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | - MMC_VDD_32_33 | MMC_VDD_33_34, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 311899ff5ffc..88c97e2d2906 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -30,6 +30,13 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/htcpld.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +46,7 @@ #include <plat/board.h> #include <plat/keypad.h> #include <plat/usb.h> +#include <plat/mmc.h> #include <mach/irqs.h> @@ -52,13 +60,123 @@ #define OMAP_LCDC_CTRL_LCD_EN (1 << 0) #define OMAP_LCDC_STAT_DONE (1 << 0) -static struct omap_lcd_config htcherald_lcd_config __initdata = { - .ctrl_name = "internal", -}; +/* GPIO definitions for the power button and keyboard slide switch */ +#define HTCHERALD_GPIO_POWER 139 +#define HTCHERALD_GPIO_SLIDE 174 +#define HTCHERALD_GIRQ_BTNS 141 -static struct omap_board_config_kernel htcherald_config[] __initdata = { - { OMAP_TAG_LCD, &htcherald_lcd_config }, -}; +/* GPIO definitions for the touchscreen */ +#define HTCHERALD_GPIO_TS 76 + +/* HTCPLD definitions */ + +/* + * CPLD Logic + * + * Chip 3 - 0x03 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * DPAD light x x x x x x x 1 + * SoundDev x x x x 1 x x x + * Screen white 1 x x x x x x x + * MMC power on x x x x x 1 x x + * Happy times (n) 0 x x x x 1 x x + * + * Chip 4 - 0x04 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * Keyboard light x x x x x x x 1 + * LCD Bright (4) x x x x x 1 1 x + * LCD Bright (3) x x x x x 0 1 x + * LCD Bright (2) x x x x x 1 0 x + * LCD Bright (1) x x x x x 0 0 x + * LCD Off x x x x 0 x x x + * LCD image (fb) 1 x x x x x x x + * LCD image (white) 0 x x x x x x x + * Caps lock LED x x 1 x x x x x + * + * Chip 5 - 0x05 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * Red (solid) x x x x x 1 x x + * Red (flash) x x x x x x 1 x + * Green (GSM flash) x x x x 1 x x x + * Green (GSM solid) x x x 1 x x x x + * Green (wifi flash) x x 1 x x x x x + * Blue (bt flash) x 1 x x x x x x + * DPAD Int Enable 1 x x x x x x 0 + * + * (Combinations of the above can be made for different colors.) + * The direction pad interrupt enable must be set each time the + * interrupt is handled. + * + * Chip 6 - 0x06 + * + * Function 7 6 5 4 3 2 1 0 + * ------------------------------------ + * Vibrator x x x x 1 x x x + * Alt LED x x x 1 x x x x + * Screen white 1 x x x x x x x + * Screen white x x 1 x x x x x + * Screen white x 0 x x x x x x + * Enable kbd dpad x x x x x x 0 x + * Happy Times 0 1 0 x x x 0 x + */ + +/* + * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account + * for the 16 MPUIO lines. + */ +#define HTCPLD_GPIO_START_OFFSET (OMAP_MAX_GPIO_LINES + 16) +#define HTCPLD_IRQ(chip, offset) (OMAP_IRQ_END + 8 * (chip) + (offset)) +#define HTCPLD_BASE(chip, offset) \ + (HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset)) + +#define HTCPLD_GPIO_LED_DPAD HTCPLD_BASE(0, 0) +#define HTCPLD_GPIO_LED_KBD HTCPLD_BASE(1, 0) +#define HTCPLD_GPIO_LED_CAPS HTCPLD_BASE(1, 5) +#define HTCPLD_GPIO_LED_RED_FLASH HTCPLD_BASE(2, 1) +#define HTCPLD_GPIO_LED_RED_SOLID HTCPLD_BASE(2, 2) +#define HTCPLD_GPIO_LED_GREEN_FLASH HTCPLD_BASE(2, 3) +#define HTCPLD_GPIO_LED_GREEN_SOLID HTCPLD_BASE(2, 4) +#define HTCPLD_GPIO_LED_WIFI HTCPLD_BASE(2, 5) +#define HTCPLD_GPIO_LED_BT HTCPLD_BASE(2, 6) +#define HTCPLD_GPIO_LED_VIBRATE HTCPLD_BASE(3, 3) +#define HTCPLD_GPIO_LED_ALT HTCPLD_BASE(3, 4) + +#define HTCPLD_GPIO_RIGHT_KBD HTCPLD_BASE(6, 7) +#define HTCPLD_GPIO_UP_KBD HTCPLD_BASE(6, 6) +#define HTCPLD_GPIO_LEFT_KBD HTCPLD_BASE(6, 5) +#define HTCPLD_GPIO_DOWN_KBD HTCPLD_BASE(6, 4) + +#define HTCPLD_GPIO_RIGHT_DPAD HTCPLD_BASE(7, 7) +#define HTCPLD_GPIO_UP_DPAD HTCPLD_BASE(7, 6) +#define HTCPLD_GPIO_LEFT_DPAD HTCPLD_BASE(7, 5) +#define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4) +#define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3) + +/* + * The htcpld chip requires a gpio write to a specific line + * to re-enable interrupts after one has occurred. + */ +#define HTCPLD_GPIO_INT_RESET_HI HTCPLD_BASE(2, 7) +#define HTCPLD_GPIO_INT_RESET_LO HTCPLD_BASE(2, 0) + +/* Chip 5 */ +#define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7) +#define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6) +#define HTCPLD_IRQ_LEFT_KBD HTCPLD_IRQ(0, 5) +#define HTCPLD_IRQ_DOWN_KBD HTCPLD_IRQ(0, 4) + +/* Chip 6 */ +#define HTCPLD_IRQ_RIGHT_DPAD HTCPLD_IRQ(1, 7) +#define HTCPLD_IRQ_UP_DPAD HTCPLD_IRQ(1, 6) +#define HTCPLD_IRQ_LEFT_DPAD HTCPLD_IRQ(1, 5) +#define HTCPLD_IRQ_DOWN_DPAD HTCPLD_IRQ(1, 4) +#define HTCPLD_IRQ_ENTER_DPAD HTCPLD_IRQ(1, 3) /* Keyboard definition */ @@ -140,6 +258,129 @@ static struct platform_device kp_device = { .resource = kp_resources, }; +/* GPIO buttons for keyboard slide and power button */ +static struct gpio_keys_button herald_gpio_keys_table[] = { + {BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20}, + {SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW, 1, 20}, + + {KEY_LEFT, HTCPLD_GPIO_LEFT_KBD, 1, "LEFT", EV_KEY, 1, 20}, + {KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20}, + {KEY_UP, HTCPLD_GPIO_UP_KBD, 1, "UP", EV_KEY, 1, 20}, + {KEY_DOWN, HTCPLD_GPIO_DOWN_KBD, 1, "DOWN", EV_KEY, 1, 20}, + + {KEY_LEFT, HTCPLD_GPIO_LEFT_DPAD, 1, "DLEFT", EV_KEY, 1, 20}, + {KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD, 1, "DRIGHT", EV_KEY, 1, 20}, + {KEY_UP, HTCPLD_GPIO_UP_DPAD, 1, "DUP", EV_KEY, 1, 20}, + {KEY_DOWN, HTCPLD_GPIO_DOWN_DPAD, 1, "DDOWN", EV_KEY, 1, 20}, + {KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD, 1, "DENTER", EV_KEY, 1, 20}, +}; + +static struct gpio_keys_platform_data herald_gpio_keys_data = { + .buttons = herald_gpio_keys_table, + .nbuttons = ARRAY_SIZE(herald_gpio_keys_table), + .rep = 1, +}; + +static struct platform_device herald_gpiokeys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &herald_gpio_keys_data, + }, +}; + +/* LEDs for the Herald. These connect to the HTCPLD GPIO device. */ +static struct gpio_led gpio_leds[] = { + {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"red_solid", "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"red_flash", NULL, HTCPLD_GPIO_LED_RED_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"wifi", NULL, HTCPLD_GPIO_LED_WIFI, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"bt", NULL, HTCPLD_GPIO_LED_BT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"caps", NULL, HTCPLD_GPIO_LED_CAPS, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, + {"alt", NULL, HTCPLD_GPIO_LED_ALT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, +}; + +static struct gpio_led_platform_data gpio_leds_data = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device gpio_leds_device = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &gpio_leds_data, + }, +}; + +/* HTC PLD chips */ + +static struct resource htcpld_resources[] = { + [0] = { + .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), + .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), + .flags = IORESOURCE_IRQ, + }, +}; + +struct htcpld_chip_platform_data htcpld_chips[] = { + [0] = { + .addr = 0x03, + .reset = 0x04, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(0, 0), + .gpio_in_base = HTCPLD_BASE(4, 0), + }, + [1] = { + .addr = 0x04, + .reset = 0x8e, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(1, 0), + .gpio_in_base = HTCPLD_BASE(5, 0), + }, + [2] = { + .addr = 0x05, + .reset = 0x80, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(2, 0), + .gpio_in_base = HTCPLD_BASE(6, 0), + .irq_base = HTCPLD_IRQ(0, 0), + .num_irqs = 8, + }, + [3] = { + .addr = 0x06, + .reset = 0x40, + .num_gpios = 8, + .gpio_out_base = HTCPLD_BASE(3, 0), + .gpio_in_base = HTCPLD_BASE(7, 0), + .irq_base = HTCPLD_IRQ(1, 0), + .num_irqs = 8, + }, +}; + +struct htcpld_core_platform_data htcpld_pfdata = { + .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI, + .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO, + .i2c_adapter_id = 1, + + .chip = htcpld_chips, + .num_chip = ARRAY_SIZE(htcpld_chips), +}; + +static struct platform_device htcpld_device = { + .name = "i2c-htcpld", + .id = -1, + .resource = htcpld_resources, + .num_resources = ARRAY_SIZE(htcpld_resources), + .dev = { + .platform_data = &htcpld_pfdata, + }, +}; + /* USB Device */ static struct omap_usb_config htcherald_usb_config __initdata = { .otg = 0, @@ -150,14 +391,71 @@ static struct omap_usb_config htcherald_usb_config __initdata = { }; /* LCD Device resources */ +static struct omap_lcd_config htcherald_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel htcherald_config[] __initdata = { + { OMAP_TAG_LCD, &htcherald_lcd_config }, +}; + static struct platform_device lcd_device = { .name = "lcd_htcherald", .id = -1, }; +/* MMC Card */ +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +static struct omap_mmc_platform_data htc_mmc1_data = { + .nr_slots = 1, + .switch_slot = NULL, + .slots[0] = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + .nomux = 1, + .wires = 4, + .switch_pin = -1, + }, +}; + +static struct omap_mmc_platform_data *htc_mmc_data[1]; +#endif + + +/* Platform devices for the Herald */ static struct platform_device *devices[] __initdata = { &kp_device, &lcd_device, + &htcpld_device, + &gpio_leds_device, + &herald_gpiokeys_device, +}; + +/* + * Touchscreen + */ +static const struct ads7846_platform_data htcherald_ts_platform_data = { + .model = 7846, + .keep_vref_on = 1, + .x_plate_ohms = 496, + .gpio_pendown = HTCHERALD_GPIO_TS, + .pressure_max = 100000, + .pressure_min = 5000, + .x_min = 528, + .x_max = 3760, + .y_min = 624, + .y_max = 3760, +}; + +static struct spi_board_info __initdata htcherald_spi_board_info[] = { + { + .modalias = "ads7846", + .platform_data = &htcherald_ts_platform_data, + .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS), + .max_speed_hz = 2500000, + .bus_num = 2, + .chip_select = 1, + } }; /* @@ -278,6 +576,7 @@ static void __init htcherald_init(void) { printk(KERN_INFO "HTC Herald init.\n"); + /* Do board initialization before we register all the devices */ omap_gpio_init(); omap_board_config = htcherald_config; @@ -288,6 +587,16 @@ static void __init htcherald_init(void) htcherald_usb_enable(); omap1_usb_init(&htcherald_usb_config); + + spi_register_board_info(htcherald_spi_board_info, + ARRAY_SIZE(htcherald_spi_board_info)); + + omap_register_i2c_bus(1, 100, NULL, 0); + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) + htc_mmc_data[0] = &htc_mmc1_data; + omap1_init_mmc(htc_mmc_data, 1); +#endif } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 5b33ae8141bc..e8ddd86e3fda 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -44,8 +44,7 @@ static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .slots[0] = { .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | - MMC_VDD_32_33 | MMC_VDD_33_34, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .name = "mmcblk", }, }; diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index aa0725608fb1..63d68cf908af 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -9,6 +9,7 @@ * (at your option) any later version. */ +#include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -191,6 +192,48 @@ static inline void omap_init_spi100k(void) } #endif + +#define OMAP1_CAMERA_BASE 0xfffb6800 +#define OMAP1_CAMERA_IOSIZE 0x1c + +static struct resource omap1_camera_resources[] = { + [0] = { + .start = OMAP1_CAMERA_BASE, + .end = OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_CAMERA, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device omap1_camera_device = { + .name = "omap1-camera", + .id = 0, /* This is used to put cameras on this interface */ + .dev = { + .dma_mask = &omap1_camera_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(omap1_camera_resources), + .resource = omap1_camera_resources, +}; + +void __init omap1_camera_init(void *info) +{ + struct platform_device *dev = &omap1_camera_device; + int ret; + + dev->dev.platform_data = info; + + ret = platform_device_register(dev); + if (ret) + dev_err(&dev->dev, "unable to register device: %d\n", ret); +} + + /*-------------------------------------------------------------------------*/ static inline void omap_init_sti(void) {} @@ -232,3 +275,30 @@ static int __init omap1_init_devices(void) } arch_initcall(omap1_init_devices); +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) + +static struct resource wdt_resources[] = { + { + .start = 0xfffeb000, + .end = 0xfffeb07F, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_wdt_device = { + .name = "omap_wdt", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static int __init omap_init_wdt(void) +{ + if (!cpu_is_omap16xx()) + return; + + platform_device_register(&omap_wdt_device); + return 0; +} +subsys_initcall(omap_init_wdt); +#endif diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h new file mode 100644 index 000000000000..fd54b452eb22 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/camera.h @@ -0,0 +1,11 @@ +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +void omap1_camera_init(void *); + +static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info) +{ + omap1_camera_init(info); +} + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h index 1b2af14df151..b001f67d695b 100644 --- a/arch/arm/mach-omap1/include/mach/vmalloc.h +++ b/arch/arm/mach-omap1/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) +#define VMALLOC_END 0xd8000000 diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c new file mode 100644 index 000000000000..8b66392be745 --- /dev/null +++ b/arch/arm/mach-omap1/pm_bus.c @@ -0,0 +1,98 @@ +/* + * Runtime PM support code for OMAP1 + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Copyright (C) 2010 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <plat/omap_device.h> +#include <plat/omap-pm.h> + +#ifdef CONFIG_PM_RUNTIME +static int omap1_pm_runtime_suspend(struct device *dev) +{ + struct clk *iclk, *fclk; + int ret = 0; + + dev_dbg(dev, "%s\n", __func__); + + ret = pm_generic_runtime_suspend(dev); + + fclk = clk_get(dev, "fck"); + if (!IS_ERR(fclk)) { + clk_disable(fclk); + clk_put(fclk); + } + + iclk = clk_get(dev, "ick"); + if (!IS_ERR(iclk)) { + clk_disable(iclk); + clk_put(iclk); + } + + return 0; +}; + +static int omap1_pm_runtime_resume(struct device *dev) +{ + int ret = 0; + struct clk *iclk, *fclk; + + dev_dbg(dev, "%s\n", __func__); + + iclk = clk_get(dev, "ick"); + if (!IS_ERR(iclk)) { + clk_enable(iclk); + clk_put(iclk); + } + + fclk = clk_get(dev, "fck"); + if (!IS_ERR(fclk)) { + clk_enable(fclk); + clk_put(fclk); + } + + return pm_generic_runtime_resume(dev); +}; + +static int __init omap1_pm_runtime_init(void) +{ + const struct dev_pm_ops *pm; + struct dev_pm_ops *omap_pm; + + pm = platform_bus_get_pm_ops(); + if (!pm) { + pr_err("%s: unable to get dev_pm_ops from platform_bus\n", + __func__); + return -ENODEV; + } + + omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL); + if (!omap_pm) { + pr_err("%s: unable to alloc memory for new dev_pm_ops\n", + __func__); + return -ENOMEM; + } + + omap_pm->runtime_suspend = omap1_pm_runtime_suspend; + omap_pm->runtime_resume = omap1_pm_runtime_resume; + + platform_bus_set_pm_ops(omap_pm); + + return 0; +} +core_initcall(omap1_pm_runtime_init); +#endif /* CONFIG_PM_RUNTIME */ diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b48bacf0a7aa..ab784bfde908 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,9 +11,8 @@ config ARCH_OMAP2PLUS_TYPICAL select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 - select SERIAL_8250 - select SERIAL_CORE_CONSOLE - select SERIAL_8250_CONSOLE + select SERIAL_OMAP + select SERIAL_OMAP_CONSOLE select I2C select I2C_OMAP select MFD @@ -35,7 +34,7 @@ config ARCH_OMAP3 default y select CPU_V7 select USB_ARCH_HAS_EHCI - select ARM_L1_CACHE_SHIFT_6 + select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 config ARCH_OMAP4 bool "TI OMAP4" @@ -43,6 +42,8 @@ config ARCH_OMAP4 depends on ARCH_OMAP2PLUS select CPU_V7 select ARM_GIC + select PL310_ERRATA_588369 + select ARM_ERRATA_720789 comment "OMAP Core Type" depends on ARCH_OMAP2 @@ -99,20 +100,20 @@ config MACH_OMAP2_TUSB6010 config MACH_OMAP_H4 bool "OMAP 2420 H4 board" - depends on ARCH_OMAP2 + depends on ARCH_OMAP2420 default y select OMAP_PACKAGE_ZAF select OMAP_DEBUG_DEVICES config MACH_OMAP_APOLLON bool "OMAP 2420 Apollon board" - depends on ARCH_OMAP2 + depends on ARCH_OMAP2420 default y select OMAP_PACKAGE_ZAC config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" - depends on ARCH_OMAP2 + depends on ARCH_OMAP2430 default y select OMAP_PACKAGE_ZAC @@ -135,6 +136,26 @@ config MACH_OMAP_LDP default y select OMAP_PACKAGE_CBB +config MACH_OMAP3530_LV_SOM + bool "OMAP3 Logic 3530 LV SOM board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CBB + default y + help + Support for the LogicPD OMAP3530 SOM Development kit + for full description please see the products webpage at + http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit + +config MACH_OMAP3_TORPEDO + bool "OMAP3 Logic 35x Torpedo board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CBB + default y + help + Support for the LogicPD OMAP35x Torpedo Development kit + for full description please see the products webpage at + http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit + config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 @@ -200,12 +221,18 @@ config MACH_OMAP_ZOOM2 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select SERIAL_8250 + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBP + select SERIAL_8250 + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35 module" @@ -214,12 +241,25 @@ config MACH_CM_T35 select OMAP_PACKAGE_CUS select OMAP_MUX +config MACH_CM_T3517 + bool "CompuLab CM-T3517 module" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + select OMAP_MUX + config MACH_IGEP0020 bool "IGEP v2 board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB +config MACH_IGEP0030 + bool "IGEP OMAP3 module" + depends on ARCH_OMAP3 + default y + select OMAP_PACKAGE_CBB + config MACH_SBC3530 bool "OMAP3 SBC STALKER board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 88d3a1e920f5..7352412e4917 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,9 +3,10 @@ # # Common support -obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o +obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \ + common.o -omap-2-3-common = irq.o sdrc.o +omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o hwmod-common = omap_hwmod.o \ omap_hwmod_common_data.o prcm-common = prcm.o powerdomain.o @@ -15,7 +16,7 @@ clock-common = clock.o clock_common_data.o \ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) -obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common) +obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -49,14 +50,18 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # Power Management ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o -obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o -obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o -obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o +obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o pm_bus.o +obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a +ifeq ($(CONFIG_PM_VERBOSE),y) +CFLAGS_pm_bus.o += -DDEBUG +endif + endif # PRCM @@ -87,6 +92,7 @@ obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o obj-$(CONFIG_ARCH_OMAP2420) += omap_hwmod_2420_data.o obj-$(CONFIG_ARCH_OMAP2430) += omap_hwmod_2430_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o +obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o # EMU peripherals obj-$(CONFIG_OMAP3_EMU) += emu.o @@ -115,6 +121,10 @@ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ board-flash.o \ hsmmc.o +obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \ + hsmmc.o +obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \ + hsmmc.o obj-$(CONFIG_MACH_OVERO) += board-overo.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ @@ -146,8 +156,11 @@ obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ hsmmc.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ hsmmc.o +obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ hsmmc.o +obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \ + hsmmc.o obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ @@ -174,3 +187,6 @@ obj-y += $(nand-m) $(nand-y) smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o obj-y += $(smc91x-m) $(smc91x-y) + +smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o +obj-y += $(smsc911x-m) $(smsc911x-y) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 8538e4131d27..fc178a022dd2 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -19,6 +19,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/mmc/host.h> #include <linux/delay.h> #include <linux/i2c/twl.h> #include <linux/err.h> @@ -190,7 +191,7 @@ static int __init omap2430_i2c_init(void) static struct omap2_hsmmc_info mmc[] __initdata = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .ext_clock = 1, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 67b95b5f1a2f..88b5734d0bb2 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -24,6 +24,7 @@ #include <linux/regulator/machine.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -38,15 +39,14 @@ #include <plat/gpmc.h> #include <plat/display.h> -#include <plat/control.h> #include <plat/gpmc-smc91x.h> -#include <mach/board-flash.h> - +#include "board-flash.h" #include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "hsmmc.h" #include "pm.h" +#include "control.h" #define CONFIG_DISABLE_HFCLK 1 @@ -76,7 +76,7 @@ static struct cpuidle_params omap3_cpuidle_params_table[] = { {1, 10000, 30000, 300000}, }; -static int board_keymap[] = { +static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), KEY(0, 2, KEY_A), @@ -353,12 +353,12 @@ static struct omap2_hsmmc_info mmc[] = { /* 8 bits (default) requires S6.3 == ON, * so the SIM card isn't used; else 4 bits. */ - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 4, }, { .mmc = 2, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 7, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index b359c3f7bb39..3ef092f839ca 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -21,8 +21,8 @@ #include <plat/usb.h> #include <mach/board-zoom.h> -#include <mach/board-flash.h> +#include "board-flash.h" #include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" @@ -208,7 +208,6 @@ static struct flash_partitions sdp_flash_partitions[] = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); - omap_serial_init(); zoom_peripherals_init(); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 9447644774c2..aafd30680fc8 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include <linux/usb/otg.h> #include <linux/spi/spi.h> #include <linux/i2c/twl.h> +#include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/leds.h> @@ -31,15 +32,18 @@ #include <plat/board.h> #include <plat/common.h> -#include <plat/control.h> -#include <plat/timer-gp.h> #include <plat/usb.h> #include <plat/mmc.h> + #include "hsmmc.h" +#include "timer-gp.h" +#include "control.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 +#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 +#define OMAP4_SFH7741_ENABLE_GPIO 188 static struct gpio_led sdp4430_gpio_leds[] = { { @@ -77,11 +81,47 @@ static struct gpio_led sdp4430_gpio_leds[] = { }; +static struct gpio_keys_button sdp4430_gpio_keys[] = { + { + .desc = "Proximity Sensor", + .type = EV_SW, + .code = SW_FRONT_PROXIMITY, + .gpio = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO, + .active_low = 0, + } +}; + static struct gpio_led_platform_data sdp4430_led_data = { .leds = sdp4430_gpio_leds, .num_leds = ARRAY_SIZE(sdp4430_gpio_leds), }; +static int omap_prox_activate(struct device *dev) +{ + gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1); + return 0; +} + +static void omap_prox_deactivate(struct device *dev) +{ + gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0); +} + +static struct gpio_keys_platform_data sdp4430_gpio_keys_data = { + .buttons = sdp4430_gpio_keys, + .nbuttons = ARRAY_SIZE(sdp4430_gpio_keys), + .enable = omap_prox_activate, + .disable = omap_prox_deactivate, +}; + +static struct platform_device sdp4430_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &sdp4430_gpio_keys_data, + }, +}; + static struct platform_device sdp4430_leds_gpio = { .name = "leds-gpio", .id = -1, @@ -161,6 +201,7 @@ static struct platform_device sdp4430_lcd_device = { static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_lcd_device, + &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, }; @@ -193,15 +234,16 @@ static struct omap_musb_board_data musb_board_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = -EINVAL, }, { .mmc = 2, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .nonremovable = true, + .ocr_mask = MMC_VDD_29_30, }, {} /* Terminator */ }; @@ -235,8 +277,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev) static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) { - struct omap_mmc_platform_data *pdata = dev->platform_data; + struct omap_mmc_platform_data *pdata; + /* dev can be null if CONFIG_MMC_OMAP_HS is not set */ + if (!dev) { + pr_err("Failed %s\n", __func__); + return; + } + pdata = dev->platform_data; pdata->init = omap4_twl6030_hsmmc_late_init; } @@ -412,6 +460,11 @@ static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { I2C_BOARD_INFO("tmp105", 0x48), }, }; +static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { + { + I2C_BOARD_INFO("hmc5843", 0x1e), + }, +}; static int __init omap4_i2c_init(void) { /* @@ -423,14 +476,36 @@ static int __init omap4_i2c_init(void) omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); - omap_register_i2c_bus(4, 400, NULL, 0); + omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo, + ARRAY_SIZE(sdp4430_i2c_4_boardinfo)); return 0; } + +static void __init omap_sfh7741prox_init(void) +{ + int error; + + error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741"); + if (error < 0) { + pr_err("%s:failed to request GPIO %d, error %d\n", + __func__, OMAP4_SFH7741_ENABLE_GPIO, error); + return; + } + + error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0); + if (error < 0) { + pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n", + __func__, OMAP4_SFH7741_ENABLE_GPIO, error); + gpio_free(OMAP4_SFH7741_ENABLE_GPIO); + } +} + static void __init omap_4430sdp_init(void) { int status; omap4_i2c_init(); + omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4d0f58592864..2f246861d97c 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/clk.h> #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/i2c/pca953x.h> @@ -32,25 +33,43 @@ #include <plat/board.h> #include <plat/common.h> -#include <plat/control.h> #include <plat/usb.h> #include <plat/display.h> #include "mux.h" +#include "control.h" -#define AM35XX_EVM_PHY_MASK (0xF) #define AM35XX_EVM_MDIO_FREQUENCY (1000000) +static struct mdio_platform_data am3517_evm_mdio_pdata = { + .bus_freq = AM35XX_EVM_MDIO_FREQUENCY, +}; + +static struct resource am3517_mdio_resources[] = { + { + .start = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, + .end = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET + + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device am3517_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(am3517_mdio_resources), + .resource = am3517_mdio_resources, + .dev.platform_data = &am3517_evm_mdio_pdata, +}; + static struct emac_platform_data am3517_evm_emac_pdata = { - .phy_mask = AM35XX_EVM_PHY_MASK, - .mdio_max_freq = AM35XX_EVM_MDIO_FREQUENCY, .rmii_en = 1, }; static struct resource am3517_emac_resources[] = { { .start = AM35XX_IPSS_EMAC_BASE, - .end = AM35XX_IPSS_EMAC_BASE + 0x3FFFF, + .end = AM35XX_IPSS_EMAC_BASE + 0x2FFFF, .flags = IORESOURCE_MEM, }, { @@ -106,14 +125,13 @@ static void am3517_disable_ethernet_int(void) regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); } -void am3517_evm_ethernet_init(struct emac_platform_data *pdata) +static void am3517_evm_ethernet_init(struct emac_platform_data *pdata) { unsigned int regval; pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET; pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET; pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET; - pdata->mdio_reg_offset = AM35XX_EMAC_MDIO_OFFSET; pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE; pdata->version = EMAC_VERSION_2; pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR; @@ -121,6 +139,9 @@ void am3517_evm_ethernet_init(struct emac_platform_data *pdata) pdata->interrupt_disable = am3517_disable_ethernet_int; am3517_emac_device.dev.platform_data = pdata; platform_device_register(&am3517_emac_device); + platform_device_register(&am3517_mdio_device); + clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev), + NULL, &am3517_emac_device.dev); regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); @@ -139,7 +160,6 @@ void am3517_evm_ethernet_init(struct emac_platform_data *pdata) static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = { { I2C_BOARD_INFO("s35390a", 0x30), - .type = "s35390a", }, }; @@ -347,7 +367,7 @@ static struct omap_dss_board_info am3517_evm_dss_data = { .default_device = &am3517_evm_lcd_device, }; -struct platform_device am3517_evm_dss_device = { +static struct platform_device am3517_evm_dss_device = { .name = "omapdss", .id = -1, .dev = { diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index c6421a72514a..102719cb052b 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -39,9 +39,9 @@ #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> -#include <plat/control.h> #include "mux.h" +#include "control.h" /* LED & Switch macros */ #define LED0_GPIO13 13 diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e10bc109415c..16aceeb30781 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -31,6 +31,7 @@ #include <linux/i2c/at24.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/mmc/host.h> #include <linux/spi/spi.h> #include <linux/spi/tdo24m.h> @@ -237,8 +238,6 @@ static inline void cm_t35_init_nand(void) {} defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) #include <linux/spi/ads7846.h> -#include <plat/mcspi.h> - static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, .single_channel = 1, /* 0: slave, 1: master */ @@ -558,7 +557,7 @@ static struct twl4030_usb_data cm_t35_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static int cm_t35_keymap[] = { +static uint32_t cm_t35_keymap[] = { KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), KEY(2, 0, KEY_RIGHT), KEY(2, 1, KEY_C), KEY(2, 2, KEY_D), @@ -579,14 +578,14 @@ static struct twl4030_keypad_data cm_t35_kp_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, { .mmc = 2, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .transceiver = 1, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c new file mode 100644 index 000000000000..c49319ff5c36 --- /dev/null +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -0,0 +1,294 @@ +/* + * linux/arch/arm/mach-omap2/board-cm-t3517.c + * + * Support for the CompuLab CM-T3517 modules + * + * Copyright (C) 2010 CompuLab, Ltd. + * Author: Igor Grinberg <grinberg@compulab.co.il> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/rtc-v3020.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/can/platform/ti_hecc.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/board.h> +#include <plat/common.h> +#include <plat/usb.h> +#include <plat/nand.h> +#include <plat/gpmc.h> + +#include <mach/am35xx.h> + +#include "mux.h" +#include "control.h" + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static struct gpio_led cm_t3517_leds[] = { + [0] = { + .gpio = 186, + .name = "cm-t3517:green", + .default_trigger = "heartbeat", + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data cm_t3517_led_pdata = { + .num_leds = ARRAY_SIZE(cm_t3517_leds), + .leds = cm_t3517_leds, +}; + +static struct platform_device cm_t3517_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &cm_t3517_led_pdata, + }, +}; + +static void __init cm_t3517_init_leds(void) +{ + platform_device_register(&cm_t3517_led_device); +} +#else +static inline void cm_t3517_init_leds(void) {} +#endif + +#if defined(CONFIG_CAN_TI_HECC) || defined(CONFIG_CAN_TI_HECC_MODULE) +static struct resource cm_t3517_hecc_resources[] = { + { + .start = AM35XX_IPSS_HECC_BASE, + .end = AM35XX_IPSS_HECC_BASE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_35XX_HECC0_IRQ, + .end = INT_35XX_HECC0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ti_hecc_platform_data cm_t3517_hecc_pdata = { + .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET, + .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET, + .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET, + .mbx_offset = AM35XX_HECC_MBOX_OFFSET, + .int_line = AM35XX_HECC_INT_LINE, + .version = AM35XX_HECC_VERSION, +}; + +static struct platform_device cm_t3517_hecc_device = { + .name = "ti_hecc", + .id = 1, + .num_resources = ARRAY_SIZE(cm_t3517_hecc_resources), + .resource = cm_t3517_hecc_resources, + .dev = { + .platform_data = &cm_t3517_hecc_pdata, + }, +}; + +static void cm_t3517_init_hecc(void) +{ + platform_device_register(&cm_t3517_hecc_device); +} +#else +static inline void cm_t3517_init_hecc(void) {} +#endif + +#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) +#define RTC_IO_GPIO (153) +#define RTC_WR_GPIO (154) +#define RTC_RD_GPIO (160) +#define RTC_CS_GPIO (163) + +struct v3020_platform_data cm_t3517_v3020_pdata = { + .use_gpio = 1, + .gpio_cs = RTC_CS_GPIO, + .gpio_wr = RTC_WR_GPIO, + .gpio_rd = RTC_RD_GPIO, + .gpio_io = RTC_IO_GPIO, +}; + +static struct platform_device cm_t3517_rtc_device = { + .name = "v3020", + .id = -1, + .dev = { + .platform_data = &cm_t3517_v3020_pdata, + } +}; + +static void __init cm_t3517_init_rtc(void) +{ + platform_device_register(&cm_t3517_rtc_device); +} +#else +static inline void cm_t3517_init_rtc(void) {} +#endif + +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) +#define HSUSB1_RESET_GPIO (146) +#define HSUSB2_RESET_GPIO (147) +#define USB_HUB_RESET_GPIO (152) + +static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = HSUSB1_RESET_GPIO, + .reset_gpio_port[1] = HSUSB2_RESET_GPIO, + .reset_gpio_port[2] = -EINVAL, +}; + +static int cm_t3517_init_usbh(void) +{ + int err; + + err = gpio_request(USB_HUB_RESET_GPIO, "usb hub rst"); + if (err) { + pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err); + } else { + gpio_direction_output(USB_HUB_RESET_GPIO, 0); + udelay(10); + gpio_set_value(USB_HUB_RESET_GPIO, 1); + msleep(1); + } + + usb_ehci_init(&cm_t3517_ehci_pdata); + + return 0; +} +#else +static inline int cm_t3517_init_usbh(void) +{ + return 0; +} +#endif + +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition cm_t3517_nand_partitions[] = { + { + .name = "xloader", + .offset = 0, /* Offset = 0x00000 */ + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE + }, + { + .name = "uboot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + }, + { + .name = "uboot environment", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 2 * NAND_BLOCK_SIZE, + }, + { + .name = "linux", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data cm_t3517_nand_data = { + .parts = cm_t3517_nand_partitions, + .nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .cs = 0, +}; + +static void __init cm_t3517_init_nand(void) +{ + if (gpmc_nand_init(&cm_t3517_nand_data) < 0) + pr_err("CM-T3517: NAND initialization failed\n"); +} +#else +static inline void cm_t3517_init_nand(void) {} +#endif + +static struct omap_board_config_kernel cm_t3517_config[] __initdata = { +}; + +static void __init cm_t3517_init_irq(void) +{ + omap_board_config = cm_t3517_config; + omap_board_config_size = ARRAY_SIZE(cm_t3517_config); + + omap2_init_common_hw(NULL, NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_board_mux board_mux[] __initdata = { + /* GPIO186 - Green LED */ + OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* RTC GPIOs: IO, WR#, RD#, CS# */ + OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* HSUSB1 RESET */ + OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* HSUSB2 RESET */ + OMAP3_MUX(UART2_RX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* CM-T3517 USB HUB nRESET */ + OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +static void __init cm_t3517_init(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_serial_init(); + cm_t3517_init_leds(); + cm_t3517_init_nand(); + cm_t3517_init_rtc(); + cm_t3517_init_usbh(); + cm_t3517_init_hecc(); +} + +MACHINE_START(CM_T3517, "Compulab CM-T3517") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .reserve = omap_reserve, + .init_irq = cm_t3517_init_irq, + .init_machine = cm_t3517_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index a07086d6a0b2..ad9ad956dd11 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -28,6 +28,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -44,7 +45,6 @@ #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> -#include <plat/timer-gp.h> #include <plat/display.h> #include <plat/mcspi.h> @@ -58,6 +58,7 @@ #include "mux.h" #include "hsmmc.h" +#include "timer-gp.h" #define NAND_BLOCK_SIZE SZ_128K @@ -105,7 +106,7 @@ static struct omap_nand_platform_data devkit8000_nand_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, }, {} /* Terminator */ @@ -198,7 +199,7 @@ static struct platform_device devkit8000_dss_device = { static struct regulator_consumer_supply devkit8000_vdda_dac_supply = REGULATOR_SUPPLY("vdda_dac", "omapdss"); -static int board_keymap[] = { +static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3), diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index ac834aa7abf6..fd38c05bb47f 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -21,7 +21,8 @@ #include <plat/nand.h> #include <plat/onenand.h> #include <plat/tc.h> -#include <mach/board-flash.h> + +#include "board-flash.h" #define REG_FPGA_REV 0x10 #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 diff --git a/arch/arm/mach-omap2/include/mach/board-flash.h b/arch/arm/mach-omap2/board-flash.h index b2242ae2bb6f..69befe00dd2f 100644 --- a/arch/arm/mach-omap2/include/mach/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -26,3 +26,5 @@ struct flash_partitions { extern void board_flash_init(struct flash_partitions [], char chip_sel[][GPMC_CS_NUM]); +extern void board_nand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 3482b99e8c86..8aee862b625a 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -48,10 +48,22 @@ static void __init omap_generic_init(void) static void __init omap_generic_map_io(void) { - omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */ - omap242x_map_common_io(); + if (cpu_is_omap242x()) { + omap2_set_globals_242x(); + omap242x_map_common_io(); + } else if (cpu_is_omap243x()) { + omap2_set_globals_243x(); + omap243x_map_common_io(); + } else if (cpu_is_omap34xx()) { + omap2_set_globals_3xxx(); + omap34xx_map_common_io(); + } else if (cpu_is_omap44xx()) { + omap2_set_globals_443x(); + omap44xx_map_common_io(); + } } +/* XXX This machine entry name should be updated */ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ .phys_io = 0x48000000, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index e09bd686389f..08492a34d310 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/control.h> #include <mach/gpio.h> #include <plat/usb.h> #include <plat/board.h> @@ -42,6 +41,7 @@ #include <plat/gpmc.h> #include "mux.h" +#include "control.h" #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 175f04339761..152f757779ab 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -20,6 +20,7 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> +#include <linux/mmc/host.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -38,12 +39,61 @@ #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 #define IGEP2_GPIO_USBH_NRESET 24 -#define IGEP2_GPIO_LED0_GREEN 26 -#define IGEP2_GPIO_LED0_RED 27 -#define IGEP2_GPIO_LED1_RED 28 -#define IGEP2_GPIO_DVI_PUP 170 -#define IGEP2_GPIO_WIFI_NPD 94 -#define IGEP2_GPIO_WIFI_NRESET 95 +#define IGEP2_GPIO_LED0_GREEN 26 +#define IGEP2_GPIO_LED0_RED 27 +#define IGEP2_GPIO_LED1_RED 28 +#define IGEP2_GPIO_DVI_PUP 170 + +#define IGEP2_RB_GPIO_WIFI_NPD 94 +#define IGEP2_RB_GPIO_WIFI_NRESET 95 +#define IGEP2_RB_GPIO_BT_NRESET 137 +#define IGEP2_RC_GPIO_WIFI_NPD 138 +#define IGEP2_RC_GPIO_WIFI_NRESET 139 +#define IGEP2_RC_GPIO_BT_NRESET 137 + +/* + * IGEP2 Hardware Revision Table + * + * -------------------------------------------------------------------------- + * | Id. | Hw Rev. | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET | + * -------------------------------------------------------------------------- + * | 0 | B | high | gpio94 | gpio95 | - | + * | 0 | B/C (B-compatible) | high | gpio94 | gpio95 | gpio137 | + * | 1 | C | low | gpio138 | gpio139 | gpio137 | + * -------------------------------------------------------------------------- + */ + +#define IGEP2_BOARD_HWREV_B 0 +#define IGEP2_BOARD_HWREV_C 1 + +static u8 hwrev; + +static void __init igep2_get_revision(void) +{ + u8 ret; + + omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); + + if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_HW0_REV") == 0) && + (gpio_direction_input(IGEP2_GPIO_LED1_RED) == 0)) { + ret = gpio_get_value(IGEP2_GPIO_LED1_RED); + if (ret == 0) { + pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_C; + } else if (ret == 1) { + pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_B; + } else { + pr_err("IGEP2: Unknown Hardware Revision\n"); + hwrev = -1; + } + } else { + pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n"); + pr_err("IGEP2: Unknown Hardware Revision\n"); + } + + gpio_free(IGEP2_GPIO_LED1_RED); +} #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) @@ -107,7 +157,7 @@ static struct platform_device igep2_onenand_device = { }, }; -void __init igep2_flash_init(void) +static void __init igep2_flash_init(void) { u8 cs = 0; u8 onenandcs = GPMC_CS_NUM + 1; @@ -141,7 +191,7 @@ void __init igep2_flash_init(void) } #else -void __init igep2_flash_init(void) {} +static void __init igep2_flash_init(void) {} #endif #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) @@ -211,10 +261,6 @@ static struct regulator_consumer_supply igep2_vmmc1_supply = { .supply = "vmmc", }; -static struct regulator_consumer_supply igep2_vmmc2_supply = { - .supply = "vmmc", -}; - /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep2_vmmc1 = { .constraints = { @@ -230,37 +276,95 @@ static struct regulator_init_data igep2_vmmc1 = { .consumer_supplies = &igep2_vmmc1_supply, }; -/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */ -static struct regulator_init_data igep2_vmmc2 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vmmc2_supply, -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, +#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) { .mmc = 2, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, +#endif {} /* Terminator */ }; +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#include <linux/leds.h> + +static struct gpio_led igep2_gpio_leds[] = { + [0] = { + .name = "gpio-led:red:d0", + .gpio = IGEP2_GPIO_LED0_RED, + .default_trigger = "default-off" + }, + [1] = { + .name = "gpio-led:green:d0", + .gpio = IGEP2_GPIO_LED0_GREEN, + .default_trigger = "default-off", + }, + [2] = { + .name = "gpio-led:red:d1", + .gpio = IGEP2_GPIO_LED1_RED, + .default_trigger = "default-off", + }, + [3] = { + .name = "gpio-led:green:d1", + .default_trigger = "heartbeat", + .gpio = -EINVAL, /* gets replaced */ + }, +}; + +static struct gpio_led_platform_data igep2_led_pdata = { + .leds = igep2_gpio_leds, + .num_leds = ARRAY_SIZE(igep2_gpio_leds), +}; + +static struct platform_device igep2_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &igep2_led_pdata, + }, +}; + +static void __init igep2_leds_init(void) +{ + platform_device_register(&igep2_led_device); +} + +#else +static inline void igep2_leds_init(void) +{ + if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && + (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) { + gpio_export(IGEP2_GPIO_LED0_RED, 0); + gpio_set_value(IGEP2_GPIO_LED0_RED, 0); + } else + pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); + + if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && + (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) { + gpio_export(IGEP2_GPIO_LED0_GREEN, 0); + gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0); + } else + pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); + + if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && + (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) { + gpio_export(IGEP2_GPIO_LED1_RED, 0); + gpio_set_value(IGEP2_GPIO_LED1_RED, 0); + } else + pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); + +} +#endif + static int igep2_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -268,20 +372,48 @@ static int igep2_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters ... we "know" the + /* + * link regulators to MMC adapters ... we "know" the * regulators will be set up only *after* we return. - */ + */ igep2_vmmc1_supply.dev = mmc[0].dev; - igep2_vmmc2_supply.dev = mmc[1].dev; + + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + if ((gpio_request(gpio + 1, "GPIO_EHCI_NOC") < 0) || + (gpio_direction_input(gpio + 1) < 0)) + pr_err("IGEP2: Could not obtain gpio for EHCI NOC"); + + /* + * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN + * (out, active low) + */ + if ((gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USBH_CPEN") < 0) || + (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0)) + pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); + + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ +#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) + if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) + && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { + gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); + gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); + } else + pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n"); +#else + igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; +#endif return 0; }; -static struct twl4030_gpio_platform_data igep2_gpio_data = { +static struct twl4030_gpio_platform_data igep2_twl4030_gpio_pdata = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, - .use_leds = false, + .use_leds = true, .setup = igep2_twl_gpio_setup, }; @@ -355,47 +487,6 @@ static void __init igep2_display_init(void) pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); } -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led igep2_gpio_leds[] = { - { - .name = "led0:red", - .gpio = IGEP2_GPIO_LED0_RED, - }, - { - .name = "led0:green", - .default_trigger = "heartbeat", - .gpio = IGEP2_GPIO_LED0_GREEN, - }, - { - .name = "led1:red", - .gpio = IGEP2_GPIO_LED1_RED, - }, -}; - -static struct gpio_led_platform_data igep2_led_pdata = { - .leds = igep2_gpio_leds, - .num_leds = ARRAY_SIZE(igep2_gpio_leds), -}; - -static struct platform_device igep2_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &igep2_led_pdata, - }, -}; - -static void __init igep2_init_led(void) -{ - platform_device_register(&igep2_led_device); -} - -#else -static inline void igep2_init_led(void) {} -#endif - static struct platform_device *igep2_devices[] __initdata = { &igep2_dss_device, }; @@ -425,14 +516,13 @@ static struct twl4030_platform_data igep2_twldata = { /* platform_data for children goes here */ .usb = &igep2_usb_data, .codec = &igep2_codec_data, - .gpio = &igep2_gpio_data, + .gpio = &igep2_twl4030_gpio_pdata, .vmmc1 = &igep2_vmmc1, - .vmmc2 = &igep2_vmmc2, .vpll2 = &igep2_vpll2, }; -static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = { +static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = { { I2C_BOARD_INFO("twl4030", 0x48), .flags = I2C_CLIENT_WAKE, @@ -441,14 +531,29 @@ static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = { }, }; -static int __init igep2_i2c_init(void) +static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { + { + I2C_BOARD_INFO("eeprom", 0x50), + }, +}; + +static void __init igep2_i2c_init(void) { - omap_register_i2c_bus(1, 2600, igep2_i2c_boardinfo, - ARRAY_SIZE(igep2_i2c_boardinfo)); - /* Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz */ - omap_register_i2c_bus(3, 100, NULL, 0); - return 0; + int ret; + + ret = omap_register_i2c_bus(1, 2600, igep2_i2c1_boardinfo, + ARRAY_SIZE(igep2_i2c1_boardinfo)); + if (ret) + pr_warning("IGEP2: Could not register I2C1 bus (%d)\n", ret); + + /* + * Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz + */ + ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, + ARRAY_SIZE(igep2_i2c3_boardinfo)); + if (ret) + pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); } static struct omap_musb_board_data musb_board_data = { @@ -476,9 +581,57 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) + +static void __init igep2_wlan_bt_init(void) +{ + unsigned npd, wreset, btreset; + + /* GPIO's for WLAN-BT combo depends on hardware revision */ + if (hwrev == IGEP2_BOARD_HWREV_B) { + npd = IGEP2_RB_GPIO_WIFI_NPD; + wreset = IGEP2_RB_GPIO_WIFI_NRESET; + btreset = IGEP2_RB_GPIO_BT_NRESET; + } else if (hwrev == IGEP2_BOARD_HWREV_C) { + npd = IGEP2_RC_GPIO_WIFI_NPD; + wreset = IGEP2_RC_GPIO_WIFI_NRESET; + btreset = IGEP2_RC_GPIO_BT_NRESET; + } else + return; + + /* Set GPIO's for WLAN-BT combo module */ + if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) && + (gpio_direction_output(npd, 1) == 0)) { + gpio_export(npd, 0); + } else + pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n"); + + if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) && + (gpio_direction_output(wreset, 1) == 0)) { + gpio_export(wreset, 0); + gpio_set_value(wreset, 0); + udelay(10); + gpio_set_value(wreset, 1); + } else + pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n"); + + if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) && + (gpio_direction_output(btreset, 1) == 0)) { + gpio_export(btreset, 0); + } else + pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n"); +} +#else +static inline void __init igep2_wlan_bt_init(void) { } +#endif + static void __init igep2_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + + /* Get IGEP2 hardware revision */ + igep2_get_revision(); + /* Register I2C busses and drivers */ igep2_i2c_init(); platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); omap_serial_init(); @@ -486,50 +639,16 @@ static void __init igep2_init(void) usb_ehci_init(&ehci_pdata); igep2_flash_init(); - igep2_init_led(); + igep2_leds_init(); igep2_display_init(); igep2_init_smsc911x(); - /* GPIO userspace leds */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(IGEP2_GPIO_LED0_RED, "led0:red") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) { - gpio_export(IGEP2_GPIO_LED0_RED, 0); - gpio_set_value(IGEP2_GPIO_LED0_RED, 0); - } else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); - - if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "led0:green") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) { - gpio_export(IGEP2_GPIO_LED0_GREEN, 0); - gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0); - } else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); - - if ((gpio_request(IGEP2_GPIO_LED1_RED, "led1:red") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) { - gpio_export(IGEP2_GPIO_LED1_RED, 0); - gpio_set_value(IGEP2_GPIO_LED1_RED, 0); - } else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); -#endif - - /* GPIO W-LAN + Bluetooth combo module */ - if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) { - gpio_export(IGEP2_GPIO_WIFI_NPD, 0); -/* gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */ - } else - pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n"); + /* + * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. + */ + igep2_wlan_bt_init(); - if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) { - gpio_export(IGEP2_GPIO_WIFI_NRESET, 0); - gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0); - udelay(10); - gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1); - } else - pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n"); } MACHINE_START(IGEP0020, "IGEP v2 board") diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c new file mode 100644 index 000000000000..7ed41e076c04 --- /dev/null +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -0,0 +1,402 @@ +/* + * Copyright (C) 2010 - ISEE 2007 SL + * + * Modified from mach-omap2/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl.h> +#include <linux/mmc/host.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/usb.h> +#include <plat/onenand.h> + +#include "mux.h" +#include "hsmmc.h" +#include "sdram-numonyx-m65kxxxxam.h" + +#define IGEP3_GPIO_LED0_GREEN 54 +#define IGEP3_GPIO_LED0_RED 53 +#define IGEP3_GPIO_LED1_RED 16 + +#define IGEP3_GPIO_WIFI_NPD 138 +#define IGEP3_GPIO_WIFI_NRESET 139 +#define IGEP3_GPIO_BT_NRESET 137 + +#define IGEP3_GPIO_USBH_NRESET 115 + + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +#define ONENAND_MAP 0x20000000 + +/* + * x2 Flash built-in COMBO POP MEMORY + * Since the device is equipped with two DataRAMs, and two-plane NAND + * Flash memory array, these two component enables simultaneous program + * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 + * while Plane2 has only odd blocks such as block1, block3, block5. + * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) + */ + +static struct mtd_partition igep3_onenand_partitions[] = { + { + .name = "X-Loader", + .offset = 0, + .size = 2 * (64*(2*2048)) + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 6 * (64*(2*2048)), + }, + { + .name = "Environment", + .offset = MTDPART_OFS_APPEND, + .size = 2 * (64*(2*2048)), + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 12 * (64*(2*2048)), + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_onenand_platform_data igep3_onenand_pdata = { + .parts = igep3_onenand_partitions, + .nr_parts = ARRAY_SIZE(igep3_onenand_partitions), + .onenand_setup = NULL, + .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ +}; + +static struct platform_device igep3_onenand_device = { + .name = "omap2-onenand", + .id = -1, + .dev = { + .platform_data = &igep3_onenand_pdata, + }, +}; + +void __init igep3_flash_init(void) +{ + u8 cs = 0; + u8 onenandcs = GPMC_CS_NUM + 1; + + for (cs = 0; cs < GPMC_CS_NUM; cs++) { + u32 ret; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* Check if NAND/oneNAND is configured */ + if ((ret & 0xC00) == 0x800) + /* NAND found */ + pr_err("IGEP3: Unsupported NAND found\n"); + else { + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + + if ((ret & 0x3F) == (ONENAND_MAP >> 24)) + /* OneNAND found */ + onenandcs = cs; + } + } + + if (onenandcs > GPMC_CS_NUM) { + pr_err("IGEP3: Unable to find configuration in GPMC\n"); + return; + } + + igep3_onenand_pdata.cs = onenandcs; + + if (platform_device_register(&igep3_onenand_device) < 0) + pr_err("IGEP3: Unable to register OneNAND device\n"); +} + +#else +void __init igep3_flash_init(void) {} +#endif + +static struct regulator_consumer_supply igep3_vmmc1_supply = { + .supply = "vmmc", +}; + +/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ +static struct regulator_init_data igep3_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep3_vmmc1_supply, +}; + +static struct omap2_hsmmc_info mmc[] = { + [0] = { + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, +#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) + [1] = { + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, +#endif + {} /* Terminator */ +}; + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#include <linux/leds.h> + +static struct gpio_led igep3_gpio_leds[] = { + [0] = { + .name = "gpio-led:red:d0", + .gpio = IGEP3_GPIO_LED0_RED, + .default_trigger = "default-off" + }, + [1] = { + .name = "gpio-led:green:d0", + .gpio = IGEP3_GPIO_LED0_GREEN, + .default_trigger = "default-off", + }, + [2] = { + .name = "gpio-led:red:d1", + .gpio = IGEP3_GPIO_LED1_RED, + .default_trigger = "default-off", + }, + [3] = { + .name = "gpio-led:green:d1", + .default_trigger = "heartbeat", + .gpio = -EINVAL, /* gets replaced */ + }, +}; + +static struct gpio_led_platform_data igep3_led_pdata = { + .leds = igep3_gpio_leds, + .num_leds = ARRAY_SIZE(igep3_gpio_leds), +}; + +static struct platform_device igep3_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &igep3_led_pdata, + }, +}; + +static void __init igep3_leds_init(void) +{ + platform_device_register(&igep3_led_device); +} + +#else +static inline void igep3_leds_init(void) +{ + if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && + (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) { + gpio_export(IGEP3_GPIO_LED0_RED, 0); + gpio_set_value(IGEP3_GPIO_LED0_RED, 1); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n"); + + if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && + (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) { + gpio_export(IGEP3_GPIO_LED0_GREEN, 0); + gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n"); + + if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && + (gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) { + gpio_export(IGEP3_GPIO_LED1_RED, 0); + gpio_set_value(IGEP3_GPIO_LED1_RED, 1); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n"); +} +#endif + +static int igep3_twl4030_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + omap2_hsmmc_init(mmc); + + /* + * link regulators to MMC adapters ... we "know" the + * regulators will be set up only *after* we return. + */ + igep3_vmmc1_supply.dev = mmc[0].dev; + + /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ +#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) + if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) + && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { + gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); + gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); +#else + igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; +#endif + + return 0; +}; + +static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .setup = igep3_twl4030_gpio_setup, +}; + +static struct twl4030_usb_data igep3_twl4030_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static void __init igep3_init_irq(void) +{ + omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params); + omap_init_irq(); + omap_gpio_init(); +} + +static struct twl4030_platform_data igep3_twl4030_pdata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &igep3_twl4030_usb_data, + .gpio = &igep3_twl4030_gpio_pdata, + .vmmc1 = &igep3_vmmc1, +}; + +static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &igep3_twl4030_pdata, + }, +}; + +static int __init igep3_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo, + ARRAY_SIZE(igep3_i2c_boardinfo)); + + return 0; +} + +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) + +static void __init igep3_wifi_bt_init(void) +{ + /* Configure MUX values for W-LAN + Bluetooth GPIO's */ + omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); + + /* Set GPIO's for W-LAN + Bluetooth combo module */ + if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && + (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) { + gpio_export(IGEP3_GPIO_WIFI_NPD, 0); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n"); + + if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && + (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) { + gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); + gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); + udelay(10); + gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n"); + + if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) && + (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) { + gpio_export(IGEP3_GPIO_BT_NRESET, 0); + } else + pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n"); +} +#else +void __init igep3_wifi_bt_init(void) {} +#endif + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init igep3_init(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + + /* Register I2C busses and drivers */ + igep3_i2c_init(); + + omap_serial_init(); + usb_musb_init(&musb_board_data); + + igep3_flash_init(); + igep3_leds_init(); + + /* + * WLAN-BT combo module from MuRata wich has a Marvell WLAN + * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. + */ + igep3_wifi_bt_init(); + +} + +MACHINE_START(IGEP0030, "IGEP OMAP3 module") + .phys_io = 0x48000000, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .init_irq = igep3_init_irq, + .init_machine = igep3_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 00d9b13b01c5..8495f37d2756 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -27,6 +27,7 @@ #include <linux/i2c/twl.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -41,11 +42,12 @@ #include <mach/board-zoom.h> #include <asm/delay.h> -#include <plat/control.h> #include <plat/usb.h> +#include "board-flash.h" #include "mux.h" #include "hsmmc.h" +#include "control.h" #define LDP_SMSC911X_CS 1 #define LDP_SMSC911X_GPIO 152 @@ -82,7 +84,7 @@ static struct platform_device ldp_smsc911x_device = { }, }; -static int board_keymap[] = { +static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3), @@ -362,7 +364,7 @@ static int __init omap_i2c_init(void) static struct omap2_hsmmc_info mmc[] __initdata = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index a3e2b49aa39f..abdcc3963a17 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -20,6 +20,7 @@ #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/usb/musb.h> +#include <sound/tlv320aic3x.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -383,15 +384,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) omap_mmc_notify_cover_event(mmc_device, index, *openp); } -void n8x0_mmc_slot1_cover_handler(void *arg, int closed_state) -{ - if (mmc_device == NULL) - return; - - slot1_cover_open = !closed_state; - omap_mmc_notify_cover_event(mmc_device, 0, closed_state); -} - static int n8x0_mmc_late_init(struct device *dev) { int r, bit, *openp; @@ -511,7 +503,7 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC]; -void __init n8x0_mmc_init(void) +static void __init n8x0_mmc_init(void) { int err; @@ -560,11 +552,6 @@ void __init n8x0_mmc_init(void) void __init n8x0_mmc_init(void) { } - -void n8x0_mmc_slot1_cover_handler(void *arg, int state) -{ -} - #endif /* CONFIG_MMC_OMAP */ #ifdef CONFIG_MENELAUS @@ -614,29 +601,35 @@ static int n8x0_menelaus_late_init(struct device *dev) return 0; } -static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = { +#else +static int n8x0_menelaus_late_init(struct device *dev) +{ + return 0; +} +#endif + +static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = { + .late_init = n8x0_menelaus_late_init, +}; + +static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = { { I2C_BOARD_INFO("menelaus", 0x72), .irq = INT_24XX_SYS_NIRQ, + .platform_data = &n8x0_menelaus_platform_data, }, }; -static struct menelaus_platform_data n8x0_menelaus_platform_data = { - .late_init = n8x0_menelaus_late_init, +static struct aic3x_pdata n810_aic33_data __initdata = { + .gpio_reset = 118, }; -static void __init n8x0_menelaus_init(void) -{ - n8x0_i2c_board_info_1[0].platform_data = &n8x0_menelaus_platform_data; - omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, - ARRAY_SIZE(n8x0_i2c_board_info_1)); -} - -#else -static inline void __init n8x0_menelaus_init(void) -{ -} -#endif +static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { + { + I2C_BOARD_INFO("tlv320aic3x", 0x18), + .platform_data = &n810_aic33_data, + }, +}; static void __init n8x0_map_io(void) { @@ -653,6 +646,11 @@ static void __init n8x0_init_irq(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* I2S codec port pins for McBSP block */ + OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -665,9 +663,14 @@ static void __init n8x0_init_machine(void) /* FIXME: add n810 spi devices */ spi_register_board_info(n800_spi_board_info, ARRAY_SIZE(n800_spi_board_info)); + omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, + ARRAY_SIZE(n8x0_i2c_board_info_1)); + omap_register_i2c_bus(2, 400, NULL, 0); + if (machine_is_nokia_n810()) + i2c_register_board_info(2, n810_i2c_board_info_2, + ARRAY_SIZE(n810_i2c_board_info_2)); omap_serial_init(); - n8x0_menelaus_init(); n8x0_onenand_init(); n8x0_mmc_init(); n8x0_usb_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 87969c7df652..73689c082b26 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -27,6 +27,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -43,13 +44,100 @@ #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> -#include <plat/timer-gp.h> #include "mux.h" #include "hsmmc.h" +#include "timer-gp.h" #define NAND_BLOCK_SIZE SZ_128K +/* + * OMAP3 Beagle revision + * Run time detection of Beagle revision is done by reading GPIO. + * GPIO ID - + * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1 + * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0 + * C4 = GPIO173, GPIO172, GPIO171: 1 0 1 + * XM = GPIO173, GPIO172, GPIO171: 0 0 0 + */ +enum { + OMAP3BEAGLE_BOARD_UNKN = 0, + OMAP3BEAGLE_BOARD_AXBX, + OMAP3BEAGLE_BOARD_C1_3, + OMAP3BEAGLE_BOARD_C4, + OMAP3BEAGLE_BOARD_XM, +}; + +static u8 omap3_beagle_version; + +static u8 omap3_beagle_get_rev(void) +{ + return omap3_beagle_version; +} + +static void __init omap3_beagle_init_rev(void) +{ + int ret; + u16 beagle_rev = 0; + + omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP); + omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); + omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); + + ret = gpio_request(171, "rev_id_0"); + if (ret < 0) + goto fail0; + + ret = gpio_request(172, "rev_id_1"); + if (ret < 0) + goto fail1; + + ret = gpio_request(173, "rev_id_2"); + if (ret < 0) + goto fail2; + + gpio_direction_input(171); + gpio_direction_input(172); + gpio_direction_input(173); + + beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) + | (gpio_get_value(173) << 2); + + switch (beagle_rev) { + case 7: + printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; + break; + case 6: + printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; + break; + case 5: + printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; + break; + case 0: + printk(KERN_INFO "OMAP3 Beagle Rev: xM\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; + break; + default: + printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); + omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; + } + + return; + +fail2: + gpio_free(172); +fail1: + gpio_free(171); +fail0: + printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; + + return; +} + static struct mtd_partition omap3beagle_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ { @@ -166,7 +254,7 @@ static void __init beagle_display_init(void) static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, }, {} /* Terminator */ @@ -185,7 +273,10 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - if (system_rev >= 0x20 && system_rev <= 0x34301000) { + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { + mmc[0].gpio_wp = -EINVAL; + } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || + (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) { omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_wp = 23; } else { @@ -322,13 +413,19 @@ static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { }, }; +static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { + { + I2C_BOARD_INFO("eeprom", 0x50), + }, +}; + static int __init omap3_beagle_i2c_init(void) { omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, ARRAY_SIZE(beagle_i2c_boardinfo)); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ - omap_register_i2c_bus(3, 100, NULL, 0); + omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); return 0; } @@ -464,6 +561,7 @@ static struct omap_musb_board_data musb_board_data = { static void __init omap3_beagle_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap3_beagle_init_rev(); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index f76d9c0a47a1..adfb7ad53bf0 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -31,6 +31,7 @@ #include <linux/smsc911x.h> #include <linux/regulator/machine.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -74,7 +75,7 @@ static void __init omap3_evm_get_revision(void) ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K); if (!ioaddr) return; - smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000; + smsc_id = __raw_readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000; iounmap(ioaddr); switch (smsc_id) { @@ -370,7 +371,7 @@ static struct regulator_init_data omap3evm_vsim = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 63, }, @@ -446,7 +447,7 @@ static struct twl4030_usb_data omap3evm_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static int board_keymap[] = { +static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), KEY(0, 2, KEY_ENTER), @@ -584,7 +585,7 @@ static int ads7846_get_pendown_state(void) return !gpio_get_value(OMAP3_EVM_TS_GPIO); } -struct ads7846_platform_data ads7846_config = { +static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, .x_plate_ohms = 180, @@ -603,7 +604,7 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .single_channel = 1, /* 0: slave, 1: master */ }; -struct spi_board_info omap3evm_spi_board_info[] = { +static struct spi_board_info omap3evm_spi_board_info[] = { [0] = { .modalias = "ads7846", .bus_num = 1, diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c new file mode 100644 index 000000000000..44ff6744ef59 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -0,0 +1,245 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3logic.c + * + * Copyright (C) 2010 Li-Pro.Net + * Stephan Linz <linz@li-pro.net> + * + * Copyright (C) 2010 Logic Product Development, Inc. + * Peter Barada <peter.barada@logicpd.com> + * + * Modified from Beagle, EVM, and RX51 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <linux/regulator/machine.h> + +#include <linux/i2c/twl.h> +#include <linux/mmc/host.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "mux.h" +#include "hsmmc.h" +#include "timer-gp.h" +#include "control.h" + +#include <plat/mux.h> +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc-smsc911x.h> +#include <plat/gpmc.h> +#include <plat/sdrc.h> + +#define OMAP3LOGIC_SMSC911X_CS 1 + +#define OMAP3530_LV_SOM_MMC_GPIO_CD 110 +#define OMAP3530_LV_SOM_MMC_GPIO_WP 126 +#define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ 152 + +#define OMAP3_TORPEDO_MMC_GPIO_CD 127 +#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129 + +static struct regulator_consumer_supply omap3logic_vmmc1_supply = { + .supply = "vmmc", +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data omap3logic_vmmc1 = { + .constraints = { + .name = "VMMC1", + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3logic_vmmc1_supply, +}; + +static struct twl4030_gpio_platform_data omap3logic_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) + | BIT(13) | BIT(15) | BIT(16) | BIT(17), +}; + +static struct twl4030_platform_data omap3logic_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .gpio = &omap3logic_gpio_data, + .vmmc1 = &omap3logic_vmmc1, +}; + +static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &omap3logic_twldata, + }, +}; + +static int __init omap3logic_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo, + ARRAY_SIZE(omap3logic_i2c_boardinfo)); + return 0; +} + +static struct omap2_hsmmc_info __initdata board_mmc_info[] = { + { + .name = "external", + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; + +static void __init board_mmc_init(void) +{ + if (machine_is_omap3530_lv_som()) { + /* OMAP3530 LV SOM board */ + board_mmc_info[0].gpio_cd = OMAP3530_LV_SOM_MMC_GPIO_CD; + board_mmc_info[0].gpio_wp = OMAP3530_LV_SOM_MMC_GPIO_WP; + omap_mux_init_signal("gpio_110", OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_126", OMAP_PIN_OUTPUT); + } else if (machine_is_omap3_torpedo()) { + /* OMAP3 Torpedo board */ + board_mmc_info[0].gpio_cd = OMAP3_TORPEDO_MMC_GPIO_CD; + omap_mux_init_signal("gpio_127", OMAP_PIN_OUTPUT); + } else { + /* unsupported board */ + printk(KERN_ERR "%s(): unknown machine type\n", __func__); + return; + } + + omap2_hsmmc_init(board_mmc_info); + /* link regulators to MMC adapters */ + omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev; +} + +static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { + .cs = OMAP3LOGIC_SMSC911X_CS, + .gpio_irq = -EINVAL, + .gpio_reset = -EINVAL, + .flags = IORESOURCE_IRQ_LOWLEVEL, +}; + +/* TODO/FIXME (comment by Peter Barada, LogicPD): + * Fix the PBIAS voltage for Torpedo MMC1 pins that + * are used for other needs (IRQs, etc). */ +static void omap3torpedo_fix_pbias_voltage(void) +{ + u16 control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; + u32 reg; + + if (machine_is_omap3_torpedo()) + { + /* Set the bias for the pin */ + reg = omap_ctrl_readl(control_pbias_offset); + + reg &= ~OMAP343X_PBIASLITEPWRDNZ1; + omap_ctrl_writel(reg, control_pbias_offset); + + /* 100ms delay required for PBIAS configuration */ + msleep(100); + + reg |= OMAP343X_PBIASLITEVMODE1; + reg |= OMAP343X_PBIASLITEPWRDNZ1; + omap_ctrl_writel(reg | 0x300, control_pbias_offset); + } +} + +static inline void __init board_smsc911x_init(void) +{ + if (machine_is_omap3530_lv_som()) { + /* OMAP3530 LV SOM board */ + board_smsc911x_data.gpio_irq = + OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ; + omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT); + } else if (machine_is_omap3_torpedo()) { + /* OMAP3 Torpedo board */ + board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ; + omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT); + } else { + /* unsupported board */ + printk(KERN_ERR "%s(): unknown machine type\n", __func__); + return; + } + + gpmc_smsc911x_init(&board_smsc911x_data); +} + +static void __init omap3logic_init_irq(void) +{ + omap2_init_common_hw(NULL, NULL); + omap_init_irq(); + omap_gpio_init(); +} + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init omap3logic_init(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap3torpedo_fix_pbias_voltage(); + omap3logic_i2c_init(); + omap_serial_init(); + board_mmc_init(); + board_smsc911x_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); +} + +MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .init_irq = omap3logic_init_irq, + .init_machine = omap3logic_init, + .timer = &omap_timer, +MACHINE_END + +MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .init_irq = omap3logic_init_irq, + .init_machine = omap3logic_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index dd3af2be13be..7192635161c1 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -32,7 +32,9 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> +#include <linux/mmc/host.h> #include <linux/mmc/card.h> +#include <linux/regulator/fixed.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -276,14 +278,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card) static struct omap2_hsmmc_info omap3pandora_mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 126, .ext_clock = 0, }, { .mmc = 2, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 127, .ext_clock = 1, @@ -291,7 +293,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { }, { .mmc = 3, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .init_card = pandora_wl1251_init_card, @@ -344,6 +346,9 @@ static struct regulator_consumer_supply pandora_vmmc1_supply = static struct regulator_consumer_supply pandora_vmmc2_supply = REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); +static struct regulator_consumer_supply pandora_vmmc3_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.2"); + static struct regulator_consumer_supply pandora_vdda_dac_supply = REGULATOR_SUPPLY("vdda_dac", "omapdss"); @@ -488,6 +493,33 @@ static struct regulator_init_data pandora_vsim = { .consumer_supplies = &pandora_adac_supply, }; +/* Fixed regulator internal to Wifi module */ +static struct regulator_init_data pandora_vmmc3 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &pandora_vmmc3_supply, +}; + +static struct fixed_voltage_config pandora_vwlan = { + .supply_name = "vwlan", + .microvolts = 1800000, /* 1.8V */ + .gpio = PANDORA_WIFI_NRESET_GPIO, + .startup_delay = 50000, /* 50ms */ + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &pandora_vmmc3, +}; + +static struct platform_device pandora_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &pandora_vwlan, + }, +}; + static struct twl4030_usb_data omap3pandora_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -501,6 +533,8 @@ static struct twl4030_codec_data omap3pandora_codec_data = { .audio = &omap3pandora_audio_data, }; +static struct twl4030_bci_platform_data pandora_bci_data; + static struct twl4030_platform_data omap3pandora_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -516,6 +550,7 @@ static struct twl4030_platform_data omap3pandora_twldata = { .vaux4 = &pandora_vaux4, .vsim = &pandora_vsim, .keypad = &pandora_kp_data, + .bci = &pandora_bci_data, }; static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { @@ -644,19 +679,8 @@ static void pandora_wl1251_init(void) if (pandora_wl1251_pdata.irq < 0) goto fail_irq; - ret = gpio_request(PANDORA_WIFI_NRESET_GPIO, "wl1251 nreset"); - if (ret < 0) - goto fail_irq; - - /* start powered so that it probes with MMC subsystem */ - ret = gpio_direction_output(PANDORA_WIFI_NRESET_GPIO, 1); - if (ret < 0) - goto fail_nreset; - return; -fail_nreset: - gpio_free(PANDORA_WIFI_NRESET_GPIO); fail_irq: gpio_free(PANDORA_WIFI_IRQ_GPIO); fail: @@ -668,6 +692,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_keys_gpio, &pandora_dss_device, &pandora_wl1251_data, + &pandora_vwlan_device, }; static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index bcd01d278c65..db644c1e9d62 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -26,6 +26,7 @@ #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -38,7 +39,6 @@ #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> -#include <plat/timer-gp.h> #include <plat/display.h> #include <plat/mcspi.h> @@ -52,6 +52,7 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" +#include "timer-gp.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #define OMAP3STALKER_ETHR_START 0x2c000000 @@ -275,7 +276,7 @@ static struct regulator_init_data omap3stalker_vsim = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = 23, }, @@ -389,7 +390,7 @@ static struct twl4030_usb_data omap3stalker_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; -static int board_keymap[] = { +static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), KEY(0, 2, KEY_ENTER), @@ -564,7 +565,7 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .single_channel = 1, /* 0: slave, 1: master */ }; -struct spi_board_info omap3stalker_spi_board_info[] = { +static struct spi_board_info omap3stalker_spi_board_info[] = { [0] = { .modalias = "ads7846", .bus_num = 1, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 663c62d271e8..7d569380d649 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -27,6 +27,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/mmc/host.h> #include <plat/mcspi.h> #include <linux/spi/spi.h> @@ -47,10 +48,10 @@ #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> -#include <plat/timer-gp.h> #include "mux.h" #include "hsmmc.h" +#include "timer-gp.h" #include <asm/setup.h> @@ -61,7 +62,7 @@ #define TB_BL_PWM_TIMER 9 #define TB_KILL_POWER_GPIO 168 -unsigned long touchbook_revision; +static unsigned long touchbook_revision; static struct mtd_partition omap3touchbook_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ @@ -108,7 +109,7 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = 29, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index c03d1d56db56..992a03e248c5 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/leds.h> #include <linux/gpio.h> #include <linux/usb/otg.h> #include <linux/i2c/twl.h> @@ -33,12 +34,42 @@ #include <plat/board.h> #include <plat/common.h> -#include <plat/control.h> -#include <plat/timer-gp.h> #include <plat/usb.h> #include <plat/mmc.h> +#include "timer-gp.h" + #include "hsmmc.h" +#include "control.h" + +static struct gpio_led gpio_leds[] = { + { + .name = "pandaboard::status1", + .default_trigger = "heartbeat", + .gpio = 7, + }, + { + .name = "pandaboard::status2", + .default_trigger = "mmc0", + .gpio = 8, + }, +}; +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct platform_device *panda_devices[] __initdata = { + &leds_gpio, +}; static void __init omap4_panda_init_irq(void) { @@ -56,7 +87,7 @@ static struct omap_musb_board_data musb_board_data = { static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = -EINVAL, }, {} /* Terminator */ @@ -274,9 +305,8 @@ static int __init omap4_panda_i2c_init(void) } static void __init omap4_panda_init(void) { - int status; - omap4_panda_i2c_init(); + platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); /* OMAP4 Panda uses internal transceiver so register nop transceiver */ diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 4c4843618350..93441e5b36ef 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -32,6 +32,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mmc/host.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -303,13 +304,13 @@ static void __init overo_flash_init(void) static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, { .mmc = 2, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .transceiver = true, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9a5eb87425fc..25a273dfb9cd 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -32,6 +32,8 @@ #include <plat/onenand.h> #include <plat/gpmc-smc91x.h> +#include <mach/board-rx51.h> + #include <sound/tlv320aic3x.h> #include <sound/tpa6130a2-plat.h> @@ -184,7 +186,7 @@ static void __init rx51_add_gpio_keys(void) } #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ -static int board_keymap[] = { +static uint32_t board_keymap[] = { /* * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row * connected to the ground" matrix state. @@ -302,7 +304,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "external", .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .cover_only = true, .gpio_cd = 160, .gpio_wp = -EINVAL, @@ -311,7 +313,8 @@ static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "internal", .mmc = 2, - .wires = 8, /* See also rx51_mmc2_remux */ + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + /* See also rx51_mmc2_remux */ .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .nonremovable = true, diff --git a/arch/arm/mach-omap2/board-rx51-sdram.c b/arch/arm/mach-omap2/board-rx51-sdram.c index f392844195d2..a43b2c5c838b 100644 --- a/arch/arm/mach-omap2/board-rx51-sdram.c +++ b/arch/arm/mach-omap2/board-rx51-sdram.c @@ -43,7 +43,7 @@ struct sdram_timings { u32 tWTR; }; -struct omap_sdrc_params rx51_sdrc_params[4]; +static struct omap_sdrc_params rx51_sdrc_params[4]; static const struct sdram_timings rx51_timings[] = { { diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 5a1005ba9815..85503fed4e13 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -20,6 +20,8 @@ #include <plat/vram.h> #include <plat/mcspi.h> +#include <mach/board-rx51.h> + #include "mux.h" #define RX51_LCD_RESET_GPIO 90 diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 1d7f827b0408..007ebdc6c993 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -16,6 +16,8 @@ #include <plat/gpmc.h> +#include <mach/board-zoom.h> + #define ZOOM_SMSC911X_CS 7 #define ZOOM_SMSC911X_GPIO 158 #define ZOOM_QUADUART_CS 3 diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6b3984964cc5..239c1f0eb940 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -16,6 +16,7 @@ #include <linux/gpio.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/mmc/host.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -24,11 +25,13 @@ #include <plat/common.h> #include <plat/usb.h> +#include <mach/board-zoom.h> + #include "mux.h" #include "hsmmc.h" /* Zoom2 has Qwerty keyboard*/ -static int board_keymap[] = { +static uint32_t board_keymap[] = { KEY(0, 0, KEY_E), KEY(0, 1, KEY_R), KEY(0, 2, KEY_T), @@ -155,14 +158,14 @@ static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "external", .mmc = 1, - .wires = 4, + .caps = MMC_CAP_4_BIT_DATA, .gpio_wp = -EINVAL, .power_saving = true, }, { .name = "internal", .mmc = 2, - .wires = 8, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .nonremovable = true, @@ -282,4 +285,5 @@ void __init zoom_peripherals_init(void) omap_i2c_init(); usb_musb_init(&musb_board_data); enable_board_wakeup_source(); + omap_serial_init(); } diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 3ad9ecf7f5e2..d356ef5336c0 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -23,6 +23,7 @@ #include <mach/board-zoom.h> +#include "board-flash.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 6ca0b8341615..95895d5bfd17 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -22,6 +22,7 @@ #include <plat/board.h> #include <plat/usb.h> +#include "board-flash.h" #include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 605f531783a8..b5babf5440e4 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -395,7 +395,7 @@ void omap2_clk_disable_unused(struct clk *clk) if ((regval32 & (1 << clk->enable_bit)) == v) return; - printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name); + pr_debug("Disabling unused clock \"%s\"\n", clk->name); if (cpu_is_omap34xx()) { omap2_clk_enable(clk); omap2_clk_disable(clk); diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 37d65d62ed8f..21f856252ad8 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -27,6 +27,7 @@ #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "control.h" #define OMAP_CM_REGADDR OMAP2420_CM_REGADDR @@ -89,6 +90,12 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ .clkdm_name = "wkup_clkdm", }; +/* Optional external clock input for McBSP CLKS */ +static struct clk mcbsp_clks = { + .name = "mcbsp_clks", + .ops = &clkops_null, +}; + /* * Analog domain root source clocks */ @@ -1135,14 +1142,34 @@ static struct clk mcbsp1_ick = { .recalc = &followparent_recalc, }; +static const struct clksel_rate common_mcbsp_96m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, + { .div = 0 } +}; + +static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, + { .div = 0 } +}; + +static const struct clksel mcbsp_fck_clksel[] = { + { .parent = &func_96m_ck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + static struct clk mcbsp1_fck = { .name = "mcbsp1_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, + .init = &omap2_init_clksel_parent, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, - .recalc = &followparent_recalc, + .clksel_reg = OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, + .clksel = mcbsp_fck_clksel, + .recalc = &omap2_clksel_recalc, }; static struct clk mcbsp2_ick = { @@ -1159,10 +1186,14 @@ static struct clk mcbsp2_fck = { .name = "mcbsp2_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, + .init = &omap2_init_clksel_parent, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, - .recalc = &followparent_recalc, + .clksel_reg = OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, + .clksel = mcbsp_fck_clksel, + .recalc = &omap2_clksel_recalc, }; static struct clk mcspi1_ick = { @@ -1721,6 +1752,9 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_242X), + CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_242X), + CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_242X), + CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_242X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_242X), CLK(NULL, "apll96_ck", &apll96_ck, CK_242X), @@ -1728,6 +1762,8 @@ static struct omap_clk omap2420_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_242X), CLK(NULL, "core_ck", &core_ck, CK_242X), + CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_242X), + CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_242X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X), @@ -1838,7 +1874,7 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "des_ick", &des_ick, CK_242X), CLK("omap-sham", "ick", &sha_ick, CK_242X), CLK("omap_rng", "ick", &rng_ick, CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_242X), + CLK("omap-aes", "ick", &aes_ick, CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb_hdrc", "fck", &osc_ck, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index b33118fb6a87..e32afcbdfb88 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -27,6 +27,7 @@ #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "control.h" #define OMAP_CM_REGADDR OMAP2430_CM_REGADDR @@ -89,6 +90,12 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ .clkdm_name = "wkup_clkdm", }; +/* Optional external clock input for McBSP CLKS */ +static struct clk mcbsp_clks = { + .name = "mcbsp_clks", + .ops = &clkops_null, +}; + /* * Analog domain root source clocks */ @@ -1123,14 +1130,34 @@ static struct clk mcbsp1_ick = { .recalc = &followparent_recalc, }; +static const struct clksel_rate common_mcbsp_96m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX }, + { .div = 0 } +}; + +static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX }, + { .div = 0 } +}; + +static const struct clksel mcbsp_fck_clksel[] = { + { .parent = &func_96m_ck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + static struct clk mcbsp1_fck = { .name = "mcbsp1_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, + .init = &omap2_init_clksel_parent, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, - .recalc = &followparent_recalc, + .clksel_reg = OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, + .clksel = mcbsp_fck_clksel, + .recalc = &omap2_clksel_recalc, }; static struct clk mcbsp2_ick = { @@ -1147,10 +1174,14 @@ static struct clk mcbsp2_fck = { .name = "mcbsp2_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, + .init = &omap2_init_clksel_parent, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, - .recalc = &followparent_recalc, + .clksel_reg = OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, + .clksel = mcbsp_fck_clksel, + .recalc = &omap2_clksel_recalc, }; static struct clk mcbsp3_ick = { @@ -1167,10 +1198,14 @@ static struct clk mcbsp3_fck = { .name = "mcbsp3_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, + .init = &omap2_init_clksel_parent, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, - .recalc = &followparent_recalc, + .clksel_reg = OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, + .clksel = mcbsp_fck_clksel, + .recalc = &omap2_clksel_recalc, }; static struct clk mcbsp4_ick = { @@ -1187,10 +1222,14 @@ static struct clk mcbsp4_fck = { .name = "mcbsp4_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, + .init = &omap2_init_clksel_parent, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, - .recalc = &followparent_recalc, + .clksel_reg = OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, + .clksel = mcbsp_fck_clksel, + .recalc = &omap2_clksel_recalc, }; static struct clk mcbsp5_ick = { @@ -1207,10 +1246,14 @@ static struct clk mcbsp5_fck = { .name = "mcbsp5_fck", .ops = &clkops_omap2_dflt_wait, .parent = &func_96m_ck, + .init = &omap2_init_clksel_parent, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, - .recalc = &followparent_recalc, + .clksel_reg = OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, + .clksel = mcbsp_fck_clksel, + .recalc = &omap2_clksel_recalc, }; static struct clk mcspi1_ick = { @@ -1808,6 +1851,12 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "osc_ck", &osc_ck, CK_243X), CLK(NULL, "sys_ck", &sys_ck, CK_243X), CLK(NULL, "alt_ck", &alt_ck, CK_243X), + CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_243X), + CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_243X), + CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_243X), + CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_243X), + CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_243X), + CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X), /* internal analog sources */ CLK(NULL, "dpll_ck", &dpll_ck, CK_243X), CLK(NULL, "apll96_ck", &apll96_ck, CK_243X), @@ -1815,6 +1864,11 @@ static struct omap_clk omap2430_clks[] = { /* internal prcm root sources */ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X), CLK(NULL, "core_ck", &core_ck, CK_243X), + CLK("omap-mcbsp.1", "prcm_fck", &func_96m_ck, CK_243X), + CLK("omap-mcbsp.2", "prcm_fck", &func_96m_ck, CK_243X), + CLK("omap-mcbsp.3", "prcm_fck", &func_96m_ck, CK_243X), + CLK("omap-mcbsp.4", "prcm_fck", &func_96m_ck, CK_243X), + CLK("omap-mcbsp.5", "prcm_fck", &func_96m_ck, CK_243X), CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X), @@ -1926,7 +1980,7 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "des_ick", &des_ick, CK_243X), CLK("omap-sham", "ick", &sha_ick, CK_243X), CLK("omap_rng", "ick", &rng_ick, CK_243X), - CLK(NULL, "aes_ick", &aes_ick, CK_243X), + CLK("omap-aes", "ick", &aes_ick, CK_243X), CLK(NULL, "pka_ick", &pka_ick, CK_243X), CLK(NULL, "usb_fck", &usb_fck, CK_243X), CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index dfdce2d82779..d85ecd5aebfd 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -20,7 +20,6 @@ #include <linux/clk.h> #include <linux/list.h> -#include <plat/control.h> #include <plat/clkdev_omap.h> #include "clock.h" @@ -33,6 +32,7 @@ #include "cm-regbits-34xx.h" #include "prm.h" #include "prm-regbits-34xx.h" +#include "control.h" /* * clocks @@ -2465,6 +2465,16 @@ static struct clk uart3_fck = { .recalc = &followparent_recalc, }; +static struct clk uart4_fck = { + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3630_EN_UART4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk gpt2_fck = { .name = "gpt2_fck", .ops = &clkops_omap2_dflt_wait, @@ -2715,6 +2725,16 @@ static struct clk uart3_ick = { .recalc = &followparent_recalc, }; +static struct clk uart4_ick = { + .name = "uart4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3630_EN_UART4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk gpt9_ick = { .name = "gpt9_ick", .ops = &clkops_omap2_dflt_wait, @@ -3188,6 +3208,11 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX), CLK(NULL, "sys_ck", &sys_ck, CK_3XXX), CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX), + CLK("omap-mcbsp.1", "pad_fck", &mcbsp_clks, CK_3XXX), + CLK("omap-mcbsp.2", "pad_fck", &mcbsp_clks, CK_3XXX), + CLK("omap-mcbsp.3", "pad_fck", &mcbsp_clks, CK_3XXX), + CLK("omap-mcbsp.4", "pad_fck", &mcbsp_clks, CK_3XXX), + CLK("omap-mcbsp.5", "pad_fck", &mcbsp_clks, CK_3XXX), CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX), CLK(NULL, "sys_clkout1", &sys_clkout1, CK_3XXX), CLK(NULL, "dpll1_ck", &dpll1_ck, CK_3XXX), @@ -3253,6 +3278,8 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2 | CK_AM35XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2 | CK_AM35XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2 | CK_AM35XX), + CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), + CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2 | CK_AM35XX), CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_3XXX), @@ -3288,7 +3315,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2 | CK_AM35XX), CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2 | CK_AM35XX), CLK(NULL, "icr_ick", &icr_ick, CK_343X), - CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), + CLK("omap-aes", "ick", &aes2_ick, CK_343X), CLK("omap-sham", "ick", &sha12_ick, CK_343X), CLK(NULL, "des2_ick", &des2_ick, CK_343X), CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_3XXX), @@ -3346,9 +3373,13 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX), CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX), CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX), + CLK("omap-mcbsp.2", "prcm_fck", &per_96m_fck, CK_3XXX), + CLK("omap-mcbsp.3", "prcm_fck", &per_96m_fck, CK_3XXX), + CLK("omap-mcbsp.4", "prcm_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX), CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), + CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), @@ -3372,6 +3403,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "gpio2_ick", &gpio2_ick, CK_3XXX), CLK(NULL, "wdt3_ick", &wdt3_ick, CK_3XXX), CLK(NULL, "uart3_ick", &uart3_ick, CK_3XXX), + CLK(NULL, "uart4_ick", &uart4_ick, CK_36XX), CLK(NULL, "gpt9_ick", &gpt9_ick, CK_3XXX), CLK(NULL, "gpt8_ick", &gpt8_ick, CK_3XXX), CLK(NULL, "gpt7_ick", &gpt7_ick, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index e10db7a90cb2..1599836ba3d9 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -17,13 +17,15 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * XXX Some of the ES1 clocks have been removed/changed; once support + * is added for discriminating clocks by ES level, these should be added back + * in. */ #include <linux/kernel.h> #include <linux/list.h> #include <linux/clk.h> - -#include <plat/control.h> #include <plat/clkdev_omap.h> #include "clock.h" @@ -32,6 +34,7 @@ #include "cm-regbits-44xx.h" #include "prm.h" #include "prm-regbits-44xx.h" +#include "control.h" /* Root clocks */ @@ -175,21 +178,27 @@ static struct clk sys_clkin_ck = { .recalc = &omap2_clksel_recalc, }; +static struct clk tie_low_clock_ck = { + .name = "tie_low_clock_ck", + .rate = 0, + .ops = &clkops_null, +}; + static struct clk utmi_phy_clkout_ck = { .name = "utmi_phy_clkout_ck", - .rate = 12000000, + .rate = 60000000, .ops = &clkops_null, }; static struct clk xclk60mhsp1_ck = { .name = "xclk60mhsp1_ck", - .rate = 12000000, + .rate = 60000000, .ops = &clkops_null, }; static struct clk xclk60mhsp2_ck = { .name = "xclk60mhsp2_ck", - .rate = 12000000, + .rate = 60000000, .ops = &clkops_null, }; @@ -201,39 +210,23 @@ static struct clk xclk60motg_ck = { /* Module clocks and DPLL outputs */ -static const struct clksel_rate div2_1to2_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_4430 }, - { .div = 2, .val = 1, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -static const struct clksel dpll_sys_ref_clk_div[] = { - { .parent = &sys_clkin_ck, .rates = div2_1to2_rates }, +static const struct clksel abe_dpll_bypass_clk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, { .parent = NULL }, }; -static struct clk dpll_sys_ref_clk = { - .name = "dpll_sys_ref_clk", +static struct clk abe_dpll_bypass_clk_mux_ck = { + .name = "abe_dpll_bypass_clk_mux_ck", .parent = &sys_clkin_ck, - .clksel = dpll_sys_ref_clk_div, - .clksel_reg = OMAP4430_CM_DPLL_SYS_REF_CLKSEL, - .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, .ops = &clkops_null, - .recalc = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap2_clksel_set_rate, -}; - -static const struct clksel abe_dpll_refclk_mux_sel[] = { - { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, - { .parent = &sys_32k_ck, .rates = div_1_1_rates }, - { .parent = NULL }, + .recalc = &followparent_recalc, }; static struct clk abe_dpll_refclk_mux_ck = { .name = "abe_dpll_refclk_mux_ck", - .parent = &dpll_sys_ref_clk, - .clksel = abe_dpll_refclk_mux_sel, + .parent = &sys_clkin_ck, + .clksel = abe_dpll_bypass_clk_mux_sel, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP4430_CM_ABE_PLL_REF_CLKSEL, .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, @@ -244,7 +237,7 @@ static struct clk abe_dpll_refclk_mux_ck = { /* DPLL_ABE */ static struct dpll_data dpll_abe_dd = { .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_ABE, - .clk_bypass = &sys_clkin_ck, + .clk_bypass = &abe_dpll_bypass_clk_mux_ck, .clk_ref = &abe_dpll_refclk_mux_ck, .control_reg = OMAP4430_CM_CLKMODE_DPLL_ABE, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), @@ -310,6 +303,12 @@ static struct clk abe_clk = { .set_rate = &omap2_clksel_set_rate, }; +static const struct clksel_rate div2_1to2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + static const struct clksel aess_fclk_div[] = { { .parent = &abe_clk, .rates = div2_1to2_rates }, { .parent = NULL }, @@ -380,14 +379,14 @@ static struct clk dpll_abe_m3_ck = { }; static const struct clksel core_hsd_byp_clk_mux_sel[] = { - { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, { .parent = &dpll_abe_m3_ck, .rates = div_1_1_rates }, { .parent = NULL }, }; static struct clk core_hsd_byp_clk_mux_ck = { .name = "core_hsd_byp_clk_mux_ck", - .parent = &dpll_sys_ref_clk, + .parent = &sys_clkin_ck, .clksel = core_hsd_byp_clk_mux_sel, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP4430_CM_CLKSEL_DPLL_CORE, @@ -400,7 +399,7 @@ static struct clk core_hsd_byp_clk_mux_ck = { static struct dpll_data dpll_core_dd = { .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_CORE, .clk_bypass = &core_hsd_byp_clk_mux_ck, - .clk_ref = &dpll_sys_ref_clk, + .clk_ref = &sys_clkin_ck, .control_reg = OMAP4430_CM_CLKMODE_DPLL_CORE, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_CORE, @@ -418,7 +417,7 @@ static struct dpll_data dpll_core_dd = { static struct clk dpll_core_ck = { .name = "dpll_core_ck", - .parent = &dpll_sys_ref_clk, + .parent = &sys_clkin_ck, .dpll_data = &dpll_core_dd, .init = &omap2_init_dpll_parent, .ops = &clkops_null, @@ -596,14 +595,14 @@ static struct clk dpll_core_m7_ck = { }; static const struct clksel iva_hsd_byp_clk_mux_sel[] = { - { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, { .parent = &div_iva_hs_clk, .rates = div_1_1_rates }, { .parent = NULL }, }; static struct clk iva_hsd_byp_clk_mux_ck = { .name = "iva_hsd_byp_clk_mux_ck", - .parent = &dpll_sys_ref_clk, + .parent = &sys_clkin_ck, .ops = &clkops_null, .recalc = &followparent_recalc, }; @@ -612,7 +611,7 @@ static struct clk iva_hsd_byp_clk_mux_ck = { static struct dpll_data dpll_iva_dd = { .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_IVA, .clk_bypass = &iva_hsd_byp_clk_mux_ck, - .clk_ref = &dpll_sys_ref_clk, + .clk_ref = &sys_clkin_ck, .control_reg = OMAP4430_CM_CLKMODE_DPLL_IVA, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_IVA, @@ -630,7 +629,7 @@ static struct dpll_data dpll_iva_dd = { static struct clk dpll_iva_ck = { .name = "dpll_iva_ck", - .parent = &dpll_sys_ref_clk, + .parent = &sys_clkin_ck, .dpll_data = &dpll_iva_dd, .init = &omap2_init_dpll_parent, .ops = &clkops_omap3_noncore_dpll_ops, @@ -672,7 +671,7 @@ static struct clk dpll_iva_m5_ck = { static struct dpll_data dpll_mpu_dd = { .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_MPU, .clk_bypass = &div_mpu_hs_clk, - .clk_ref = &dpll_sys_ref_clk, + .clk_ref = &sys_clkin_ck, .control_reg = OMAP4430_CM_CLKMODE_DPLL_MPU, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_MPU, @@ -690,7 +689,7 @@ static struct dpll_data dpll_mpu_dd = { static struct clk dpll_mpu_ck = { .name = "dpll_mpu_ck", - .parent = &dpll_sys_ref_clk, + .parent = &sys_clkin_ck, .dpll_data = &dpll_mpu_dd, .init = &omap2_init_dpll_parent, .ops = &clkops_omap3_noncore_dpll_ops, @@ -724,14 +723,14 @@ static struct clk per_hs_clk_div_ck = { }; static const struct clksel per_hsd_byp_clk_mux_sel[] = { - { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, { .parent = &per_hs_clk_div_ck, .rates = div_1_1_rates }, { .parent = NULL }, }; static struct clk per_hsd_byp_clk_mux_ck = { .name = "per_hsd_byp_clk_mux_ck", - .parent = &dpll_sys_ref_clk, + .parent = &sys_clkin_ck, .clksel = per_hsd_byp_clk_mux_sel, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP4430_CM_CLKSEL_DPLL_PER, @@ -744,7 +743,7 @@ static struct clk per_hsd_byp_clk_mux_ck = { static struct dpll_data dpll_per_dd = { .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_PER, .clk_bypass = &per_hsd_byp_clk_mux_ck, - .clk_ref = &dpll_sys_ref_clk, + .clk_ref = &sys_clkin_ck, .control_reg = OMAP4430_CM_CLKMODE_DPLL_PER, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_PER, @@ -762,7 +761,7 @@ static struct dpll_data dpll_per_dd = { static struct clk dpll_per_ck = { .name = "dpll_per_ck", - .parent = &dpll_sys_ref_clk, + .parent = &sys_clkin_ck, .dpll_data = &dpll_per_dd, .init = &omap2_init_dpll_parent, .ops = &clkops_omap3_noncore_dpll_ops, @@ -858,8 +857,8 @@ static struct clk dpll_per_m7_ck = { /* DPLL_UNIPRO */ static struct dpll_data dpll_unipro_dd = { .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_UNIPRO, - .clk_bypass = &dpll_sys_ref_clk, - .clk_ref = &dpll_sys_ref_clk, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &sys_clkin_ck, .control_reg = OMAP4430_CM_CLKMODE_DPLL_UNIPRO, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO, @@ -877,7 +876,7 @@ static struct dpll_data dpll_unipro_dd = { static struct clk dpll_unipro_ck = { .name = "dpll_unipro_ck", - .parent = &dpll_sys_ref_clk, + .parent = &sys_clkin_ck, .dpll_data = &dpll_unipro_dd, .init = &omap2_init_dpll_parent, .ops = &clkops_omap3_noncore_dpll_ops, @@ -914,7 +913,8 @@ static struct clk usb_hs_clk_div_ck = { static struct dpll_data dpll_usb_dd = { .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_USB, .clk_bypass = &usb_hs_clk_div_ck, - .clk_ref = &dpll_sys_ref_clk, + .flags = DPLL_J_TYPE | DPLL_NO_DCO_SEL, + .clk_ref = &sys_clkin_ck, .control_reg = OMAP4430_CM_CLKMODE_DPLL_USB, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_USB, @@ -927,13 +927,12 @@ static struct dpll_data dpll_usb_dd = { .max_multiplier = OMAP4430_MAX_DPLL_MULT, .max_divider = OMAP4430_MAX_DPLL_DIV, .min_divider = 1, - .flags = DPLL_J_TYPE | DPLL_NO_DCO_SEL }; static struct clk dpll_usb_ck = { .name = "dpll_usb_ck", - .parent = &dpll_sys_ref_clk, + .parent = &sys_clkin_ck, .dpll_data = &dpll_usb_dd, .init = &omap2_init_dpll_parent, .ops = &clkops_omap3_noncore_dpll_ops, @@ -1222,7 +1221,7 @@ static struct clk per_abe_24m_fclk = { static const struct clksel pmd_stm_clock_mux_sel[] = { { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, { .parent = &dpll_core_m6_ck, .rates = div_1_1_rates }, - { .parent = &dpll_per_m7_ck, .rates = div_1_2_rates }, + { .parent = &tie_low_clock_ck, .rates = div_1_2_rates }, { .parent = NULL }, }; @@ -1240,10 +1239,15 @@ static struct clk pmd_trace_clk_mux_ck = { .recalc = &followparent_recalc, }; +static const struct clksel syc_clk_div_div[] = { + { .parent = &sys_clkin_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + static struct clk syc_clk_div_ck = { .name = "syc_clk_div_ck", .parent = &sys_clkin_ck, - .clksel = dpll_sys_ref_clk_div, + .clksel = syc_clk_div_div, .clksel_reg = OMAP4430_CM_ABE_DSS_SYS_CLKSEL, .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, .ops = &clkops_null, @@ -1284,13 +1288,13 @@ static struct clk aess_fck = { .recalc = &followparent_recalc, }; -static struct clk cust_efuse_fck = { - .name = "cust_efuse_fck", +static struct clk bandgap_fclk = { + .name = "bandgap_fclk", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_cefuse_clkdm", - .parent = &sys_clkin_ck, + .enable_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, .recalc = &followparent_recalc, }; @@ -1344,6 +1348,56 @@ static struct clk dmic_fck = { .clkdm_name = "abe_clkdm", }; +static struct clk dsp_fck = { + .name = "dsp_fck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "tesla_clkdm", + .parent = &dpll_iva_m4_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dss_sys_clk = { + .name = "dss_sys_clk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT, + .clkdm_name = "l3_dss_clkdm", + .parent = &syc_clk_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dss_tv_clk = { + .name = "dss_tv_clk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_TV_CLK_SHIFT, + .clkdm_name = "l3_dss_clkdm", + .parent = &extalt_clkin_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dss_dss_clk = { + .name = "dss_dss_clk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_DSSCLK_SHIFT, + .clkdm_name = "l3_dss_clkdm", + .parent = &dpll_per_m5_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dss_48mhz_clk = { + .name = "dss_48mhz_clk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT, + .clkdm_name = "l3_dss_clkdm", + .parent = &func_48mc_fclk, + .recalc = &followparent_recalc, +}; + static struct clk dss_fck = { .name = "dss_fck", .ops = &clkops_omap2_dflt, @@ -1354,18 +1408,18 @@ static struct clk dss_fck = { .recalc = &followparent_recalc, }; -static struct clk ducati_ick = { - .name = "ducati_ick", +static struct clk efuse_ctrl_cust_fck = { + .name = "efuse_ctrl_cust_fck", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_HWCTRL, - .clkdm_name = "ducati_clkdm", - .parent = &ducati_clk_mux_ck, + .enable_reg = OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_cefuse_clkdm", + .parent = &sys_clkin_ck, .recalc = &followparent_recalc, }; -static struct clk emif1_ick = { - .name = "emif1_ick", +static struct clk emif1_fck = { + .name = "emif1_fck", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, @@ -1375,8 +1429,8 @@ static struct clk emif1_ick = { .recalc = &followparent_recalc, }; -static struct clk emif2_ick = { - .name = "emif2_ick", +static struct clk emif2_fck = { + .name = "emif2_fck", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, @@ -1407,42 +1461,24 @@ static struct clk fdif_fck = { .clkdm_name = "iss_clkdm", }; -static const struct clksel per_sgx_fclk_div[] = { - { .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates }, - { .parent = NULL }, -}; - -static struct clk per_sgx_fclk = { - .name = "per_sgx_fclk", - .parent = &dpll_per_m2x2_ck, - .clksel = per_sgx_fclk_div, - .clksel_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_PER_192M_MASK, - .ops = &clkops_null, - .recalc = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap2_clksel_set_rate, -}; - -static const struct clksel sgx_clk_mux_sel[] = { - { .parent = &dpll_core_m7_ck, .rates = div_1_0_rates }, - { .parent = &per_sgx_fclk, .rates = div_1_1_rates }, - { .parent = NULL }, +static struct clk fpka_fck = { + .name = "fpka_fck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, }; -/* Merged sgx_clk_mux into gfx */ -static struct clk gfx_fck = { - .name = "gfx_fck", - .parent = &dpll_core_m7_ck, - .clksel = sgx_clk_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_SGX_FCLK_MASK, +static struct clk gpio1_dbclk = { + .name = "gpio1_dbclk", .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l3_gfx_clkdm", + .enable_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_DBCLK_SHIFT, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, }; static struct clk gpio1_ick = { @@ -1455,6 +1491,16 @@ static struct clk gpio1_ick = { .recalc = &followparent_recalc, }; +static struct clk gpio2_dbclk = { + .name = "gpio2_dbclk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_DBCLK_SHIFT, + .clkdm_name = "l4_per_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + static struct clk gpio2_ick = { .name = "gpio2_ick", .ops = &clkops_omap2_dflt, @@ -1465,6 +1511,16 @@ static struct clk gpio2_ick = { .recalc = &followparent_recalc, }; +static struct clk gpio3_dbclk = { + .name = "gpio3_dbclk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_DBCLK_SHIFT, + .clkdm_name = "l4_per_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + static struct clk gpio3_ick = { .name = "gpio3_ick", .ops = &clkops_omap2_dflt, @@ -1475,6 +1531,16 @@ static struct clk gpio3_ick = { .recalc = &followparent_recalc, }; +static struct clk gpio4_dbclk = { + .name = "gpio4_dbclk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_DBCLK_SHIFT, + .clkdm_name = "l4_per_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + static struct clk gpio4_ick = { .name = "gpio4_ick", .ops = &clkops_omap2_dflt, @@ -1485,6 +1551,16 @@ static struct clk gpio4_ick = { .recalc = &followparent_recalc, }; +static struct clk gpio5_dbclk = { + .name = "gpio5_dbclk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_DBCLK_SHIFT, + .clkdm_name = "l4_per_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + static struct clk gpio5_ick = { .name = "gpio5_ick", .ops = &clkops_omap2_dflt, @@ -1495,6 +1571,16 @@ static struct clk gpio5_ick = { .recalc = &followparent_recalc, }; +static struct clk gpio6_dbclk = { + .name = "gpio6_dbclk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_DBCLK_SHIFT, + .clkdm_name = "l4_per_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + static struct clk gpio6_ick = { .name = "gpio6_ick", .ops = &clkops_omap2_dflt, @@ -1515,214 +1601,25 @@ static struct clk gpmc_ick = { .recalc = &followparent_recalc, }; -static const struct clksel dmt1_clk_mux_sel[] = { - { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, - { .parent = &sys_32k_ck, .rates = div_1_1_rates }, - { .parent = NULL }, -}; - -/* - * Merged dmt1_clk_mux into gptimer1 - * gptimer1 renamed temporarily into gpt1 to match OMAP3 convention - */ -static struct clk gpt1_fck = { - .name = "gpt1_fck", - .parent = &sys_clkin_ck, - .clksel = dmt1_clk_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_wkup_clkdm", -}; - -/* - * Merged cm2_dm10_mux into gptimer10 - * gptimer10 renamed temporarily into gpt10 to match OMAP3 convention - */ -static struct clk gpt10_fck = { - .name = "gpt10_fck", - .parent = &sys_clkin_ck, - .clksel = dmt1_clk_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_per_clkdm", -}; - -/* - * Merged cm2_dm11_mux into gptimer11 - * gptimer11 renamed temporarily into gpt11 to match OMAP3 convention - */ -static struct clk gpt11_fck = { - .name = "gpt11_fck", - .parent = &sys_clkin_ck, - .clksel = dmt1_clk_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_per_clkdm", -}; - -/* - * Merged cm2_dm2_mux into gptimer2 - * gptimer2 renamed temporarily into gpt2 to match OMAP3 convention - */ -static struct clk gpt2_fck = { - .name = "gpt2_fck", - .parent = &sys_clkin_ck, - .clksel = dmt1_clk_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_per_clkdm", -}; - -/* - * Merged cm2_dm3_mux into gptimer3 - * gptimer3 renamed temporarily into gpt3 to match OMAP3 convention - */ -static struct clk gpt3_fck = { - .name = "gpt3_fck", - .parent = &sys_clkin_ck, - .clksel = dmt1_clk_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_per_clkdm", -}; - -/* - * Merged cm2_dm4_mux into gptimer4 - * gptimer4 renamed temporarily into gpt4 to match OMAP3 convention - */ -static struct clk gpt4_fck = { - .name = "gpt4_fck", - .parent = &sys_clkin_ck, - .clksel = dmt1_clk_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_per_clkdm", -}; - -static const struct clksel timer5_sync_mux_sel[] = { - { .parent = &syc_clk_div_ck, .rates = div_1_0_rates }, - { .parent = &sys_32k_ck, .rates = div_1_1_rates }, +static const struct clksel sgx_clk_mux_sel[] = { + { .parent = &dpll_core_m7_ck, .rates = div_1_0_rates }, + { .parent = &dpll_per_m7_ck, .rates = div_1_1_rates }, { .parent = NULL }, }; -/* - * Merged timer5_sync_mux into gptimer5 - * gptimer5 renamed temporarily into gpt5 to match OMAP3 convention - */ -static struct clk gpt5_fck = { - .name = "gpt5_fck", - .parent = &syc_clk_div_ck, - .clksel = timer5_sync_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "abe_clkdm", -}; - -/* - * Merged timer6_sync_mux into gptimer6 - * gptimer6 renamed temporarily into gpt6 to match OMAP3 convention - */ -static struct clk gpt6_fck = { - .name = "gpt6_fck", - .parent = &syc_clk_div_ck, - .clksel = timer5_sync_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "abe_clkdm", -}; - -/* - * Merged timer7_sync_mux into gptimer7 - * gptimer7 renamed temporarily into gpt7 to match OMAP3 convention - */ -static struct clk gpt7_fck = { - .name = "gpt7_fck", - .parent = &syc_clk_div_ck, - .clksel = timer5_sync_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "abe_clkdm", -}; - -/* - * Merged timer8_sync_mux into gptimer8 - * gptimer8 renamed temporarily into gpt8 to match OMAP3 convention - */ -static struct clk gpt8_fck = { - .name = "gpt8_fck", - .parent = &syc_clk_div_ck, - .clksel = timer5_sync_mux_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, - .ops = &clkops_omap2_dflt, - .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "abe_clkdm", -}; - -/* - * Merged cm2_dm9_mux into gptimer9 - * gptimer9 renamed temporarily into gpt9 to match OMAP3 convention - */ -static struct clk gpt9_fck = { - .name = "gpt9_fck", - .parent = &sys_clkin_ck, - .clksel = dmt1_clk_mux_sel, +/* Merged sgx_clk_mux into gpu */ +static struct clk gpu_fck = { + .name = "gpu_fck", + .parent = &dpll_core_m7_ck, + .clksel = sgx_clk_mux_sel, .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_MASK, + .clksel_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SGX_FCLK_MASK, .ops = &clkops_omap2_dflt, .recalc = &omap2_clksel_recalc, - .enable_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .enable_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_per_clkdm", + .clkdm_name = "l3_gfx_clkdm", }; static struct clk hdq1w_fck = { @@ -1735,11 +1632,16 @@ static struct clk hdq1w_fck = { .recalc = &followparent_recalc, }; +static const struct clksel hsi_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + /* Merged hsi_fclk into hsi */ -static struct clk hsi_ick = { - .name = "hsi_ick", +static struct clk hsi_fck = { + .name = "hsi_fck", .parent = &dpll_per_m2x2_ck, - .clksel = per_sgx_fclk_div, + .clksel = hsi_fclk_div, .clksel_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_24_25_MASK, .ops = &clkops_omap2_dflt, @@ -1791,6 +1693,26 @@ static struct clk i2c4_fck = { .recalc = &followparent_recalc, }; +static struct clk ipu_fck = { + .name = "ipu_fck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ducati_clkdm", + .parent = &ducati_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk iss_ctrlclk = { + .name = "iss_ctrlclk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_CAM_ISS_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT, + .clkdm_name = "iss_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + static struct clk iss_fck = { .name = "iss_fck", .ops = &clkops_omap2_dflt, @@ -1801,8 +1723,8 @@ static struct clk iss_fck = { .recalc = &followparent_recalc, }; -static struct clk ivahd_ick = { - .name = "ivahd_ick", +static struct clk iva_fck = { + .name = "iva_fck", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, @@ -1811,8 +1733,8 @@ static struct clk ivahd_ick = { .recalc = &followparent_recalc, }; -static struct clk keyboard_fck = { - .name = "keyboard_fck", +static struct clk kbd_fck = { + .name = "kbd_fck", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_SWCTRL, @@ -1821,8 +1743,8 @@ static struct clk keyboard_fck = { .recalc = &followparent_recalc, }; -static struct clk l3_instr_interconnect_ick = { - .name = "l3_instr_interconnect_ick", +static struct clk l3_instr_ick = { + .name = "l3_instr_ick", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, @@ -1831,8 +1753,8 @@ static struct clk l3_instr_interconnect_ick = { .recalc = &followparent_recalc, }; -static struct clk l3_interconnect_3_ick = { - .name = "l3_interconnect_3_ick", +static struct clk l3_main_3_ick = { + .name = "l3_main_3_ick", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_L3INSTR_L3_3_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, @@ -2005,6 +1927,16 @@ static struct clk mcbsp4_fck = { .clkdm_name = "l4_per_clkdm", }; +static struct clk mcpdm_fck = { + .name = "mcpdm_fck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &pad_clks_ck, + .recalc = &followparent_recalc, +}; + static struct clk mcspi1_fck = { .name = "mcspi1_fck", .ops = &clkops_omap2_dflt, @@ -2105,33 +2037,33 @@ static struct clk mmc5_fck = { .recalc = &followparent_recalc, }; -static struct clk ocp_wp1_ick = { - .name = "ocp_wp1_ick", +static struct clk ocp2scp_usb_phy_phy_48m = { + .name = "ocp2scp_usb_phy_phy_48m", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_HWCTRL, - .clkdm_name = "l3_instr_clkdm", - .parent = &l3_div_ck, + .enable_reg = OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, + .clkdm_name = "l3_init_clkdm", + .parent = &func_48m_fclk, .recalc = &followparent_recalc, }; -static struct clk pdm_fck = { - .name = "pdm_fck", +static struct clk ocp2scp_usb_phy_ick = { + .name = "ocp2scp_usb_phy_ick", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "abe_clkdm", - .parent = &pad_clks_ck, + .enable_reg = OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l4_div_ck, .recalc = &followparent_recalc, }; -static struct clk pkaeip29_fck = { - .name = "pkaeip29_fck", +static struct clk ocp_wp_noc_ick = { + .name = "ocp_wp_noc_ick", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_secure_clkdm", - .parent = &l4_div_ck, + .enable_reg = OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, .recalc = &followparent_recalc, }; @@ -2145,8 +2077,8 @@ static struct clk rng_ick = { .recalc = &followparent_recalc, }; -static struct clk sha2md51_fck = { - .name = "sha2md51_fck", +static struct clk sha2md5_fck = { + .name = "sha2md5_fck", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_SWCTRL, @@ -2155,8 +2087,8 @@ static struct clk sha2md51_fck = { .recalc = &followparent_recalc, }; -static struct clk sl2_ick = { - .name = "sl2_ick", +static struct clk sl2if_ick = { + .name = "sl2if_ick", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_IVAHD_SL2_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, @@ -2165,6 +2097,46 @@ static struct clk sl2_ick = { .recalc = &followparent_recalc, }; +static struct clk slimbus1_fclk_1 = { + .name = "slimbus1_fclk_1", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_FCLK1_SHIFT, + .clkdm_name = "abe_clkdm", + .parent = &func_24m_clk, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus1_fclk_0 = { + .name = "slimbus1_fclk_0", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_FCLK0_SHIFT, + .clkdm_name = "abe_clkdm", + .parent = &abe_24m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus1_fclk_2 = { + .name = "slimbus1_fclk_2", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_FCLK2_SHIFT, + .clkdm_name = "abe_clkdm", + .parent = &pad_clks_ck, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus1_slimbus_clk = { + .name = "slimbus1_slimbus_clk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT, + .clkdm_name = "abe_clkdm", + .parent = &slimbus_clk, + .recalc = &followparent_recalc, +}; + static struct clk slimbus1_fck = { .name = "slimbus1_fck", .ops = &clkops_omap2_dflt, @@ -2175,6 +2147,36 @@ static struct clk slimbus1_fck = { .recalc = &followparent_recalc, }; +static struct clk slimbus2_fclk_1 = { + .name = "slimbus2_fclk_1", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT, + .clkdm_name = "l4_per_clkdm", + .parent = &per_abe_24m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus2_fclk_0 = { + .name = "slimbus2_fclk_0", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT, + .clkdm_name = "l4_per_clkdm", + .parent = &func_24mc_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus2_slimbus_clk = { + .name = "slimbus2_slimbus_clk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT, + .clkdm_name = "l4_per_clkdm", + .parent = &pad_slimbus_core_clks_ck, + .recalc = &followparent_recalc, +}; + static struct clk slimbus2_fck = { .name = "slimbus2_fck", .ops = &clkops_omap2_dflt, @@ -2185,8 +2187,8 @@ static struct clk slimbus2_fck = { .recalc = &followparent_recalc, }; -static struct clk sr_core_fck = { - .name = "sr_core_fck", +static struct clk smartreflex_core_fck = { + .name = "smartreflex_core_fck", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_SWCTRL, @@ -2195,8 +2197,8 @@ static struct clk sr_core_fck = { .recalc = &followparent_recalc, }; -static struct clk sr_iva_fck = { - .name = "sr_iva_fck", +static struct clk smartreflex_iva_fck = { + .name = "smartreflex_iva_fck", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_SWCTRL, @@ -2205,8 +2207,8 @@ static struct clk sr_iva_fck = { .recalc = &followparent_recalc, }; -static struct clk sr_mpu_fck = { - .name = "sr_mpu_fck", +static struct clk smartreflex_mpu_fck = { + .name = "smartreflex_mpu_fck", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_SWCTRL, @@ -2215,14 +2217,175 @@ static struct clk sr_mpu_fck = { .recalc = &followparent_recalc, }; -static struct clk tesla_ick = { - .name = "tesla_ick", +/* Merged dmt1_clk_mux into timer1 */ +static struct clk timer1_fck = { + .name = "timer1_fck", + .parent = &sys_clkin_ck, + .clksel = abe_dpll_bypass_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_HWCTRL, - .clkdm_name = "tesla_clkdm", - .parent = &dpll_iva_m4_ck, - .recalc = &followparent_recalc, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", +}; + +/* Merged cm2_dm10_mux into timer10 */ +static struct clk timer10_fck = { + .name = "timer10_fck", + .parent = &sys_clkin_ck, + .clksel = abe_dpll_bypass_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm11_mux into timer11 */ +static struct clk timer11_fck = { + .name = "timer11_fck", + .parent = &sys_clkin_ck, + .clksel = abe_dpll_bypass_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm2_mux into timer2 */ +static struct clk timer2_fck = { + .name = "timer2_fck", + .parent = &sys_clkin_ck, + .clksel = abe_dpll_bypass_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm3_mux into timer3 */ +static struct clk timer3_fck = { + .name = "timer3_fck", + .parent = &sys_clkin_ck, + .clksel = abe_dpll_bypass_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm4_mux into timer4 */ +static struct clk timer4_fck = { + .name = "timer4_fck", + .parent = &sys_clkin_ck, + .clksel = abe_dpll_bypass_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static const struct clksel timer5_sync_mux_sel[] = { + { .parent = &syc_clk_div_ck, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged timer5_sync_mux into timer5 */ +static struct clk timer5_fck = { + .name = "timer5_fck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer6_sync_mux into timer6 */ +static struct clk timer6_fck = { + .name = "timer6_fck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer7_sync_mux into timer7 */ +static struct clk timer7_fck = { + .name = "timer7_fck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer8_sync_mux into timer8 */ +static struct clk timer8_fck = { + .name = "timer8_fck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged cm2_dm9_mux into timer9 */ +static struct clk timer9_fck = { + .name = "timer9_fck", + .parent = &sys_clkin_ck, + .clksel = abe_dpll_bypass_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", }; static struct clk uart1_fck = { @@ -2265,105 +2428,148 @@ static struct clk uart4_fck = { .recalc = &followparent_recalc, }; -static struct clk unipro1_fck = { - .name = "unipro1_fck", +static struct clk usb_host_fs_fck = { + .name = "usb_host_fs_fck", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_SWCTRL, .clkdm_name = "l3_init_clkdm", - .parent = &func_96m_fclk, + .parent = &func_48mc_fclk, .recalc = &followparent_recalc, }; -static struct clk usb_host_fck = { - .name = "usb_host_fck", +static struct clk usb_host_hs_utmi_p3_clk = { + .name = "usb_host_hs_utmi_p3_clk", .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT, .clkdm_name = "l3_init_clkdm", .parent = &init_60m_fclk, .recalc = &followparent_recalc, }; -static struct clk usb_host_fs_fck = { - .name = "usb_host_fs_fck", +static struct clk usb_host_hs_hsic60m_p1_clk = { + .name = "usb_host_hs_hsic60m_p1_clk", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT, .clkdm_name = "l3_init_clkdm", - .parent = &func_48mc_fclk, + .parent = &init_60m_fclk, .recalc = &followparent_recalc, }; -static struct clk usb_otg_ick = { - .name = "usb_otg_ick", +static struct clk usb_host_hs_hsic60m_p2_clk = { + .name = "usb_host_hs_hsic60m_p2_clk", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT, .clkdm_name = "l3_init_clkdm", - .parent = &l3_div_ck, + .parent = &init_60m_fclk, .recalc = &followparent_recalc, }; -static struct clk usb_tll_ick = { - .name = "usb_tll_ick", +static const struct clksel utmi_p1_gfclk_sel[] = { + { .parent = &init_60m_fclk, .rates = div_1_0_rates }, + { .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk utmi_p1_gfclk = { + .name = "utmi_p1_gfclk", + .parent = &init_60m_fclk, + .clksel = utmi_p1_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_UTMI_P1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk usb_host_hs_utmi_p1_clk = { + .name = "usb_host_hs_utmi_p1_clk", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT, .clkdm_name = "l3_init_clkdm", - .parent = &l4_div_ck, + .parent = &utmi_p1_gfclk, .recalc = &followparent_recalc, }; -static struct clk usbphyocp2scp_ick = { - .name = "usbphyocp2scp_ick", +static const struct clksel utmi_p2_gfclk_sel[] = { + { .parent = &init_60m_fclk, .rates = div_1_0_rates }, + { .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk utmi_p2_gfclk = { + .name = "utmi_p2_gfclk", + .parent = &init_60m_fclk, + .clksel = utmi_p2_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_UTMI_P2_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk usb_host_hs_utmi_p2_clk = { + .name = "usb_host_hs_utmi_p2_clk", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT, .clkdm_name = "l3_init_clkdm", - .parent = &l4_div_ck, + .parent = &utmi_p2_gfclk, .recalc = &followparent_recalc, }; -static struct clk usim_fck = { - .name = "usim_fck", +static struct clk usb_host_hs_hsic480m_p1_clk = { + .name = "usb_host_hs_hsic480m_p1_clk", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_wkup_clkdm", - .parent = &sys_32k_ck, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT, + .clkdm_name = "l3_init_clkdm", + .parent = &dpll_usb_m2_ck, .recalc = &followparent_recalc, }; -static struct clk wdt2_fck = { - .name = "wdt2_fck", +static struct clk usb_host_hs_hsic480m_p2_clk = { + .name = "usb_host_hs_hsic480m_p2_clk", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "l4_wkup_clkdm", - .parent = &sys_32k_ck, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT, + .clkdm_name = "l3_init_clkdm", + .parent = &dpll_usb_m2_ck, .recalc = &followparent_recalc, }; -static struct clk wdt3_fck = { - .name = "wdt3_fck", +static struct clk usb_host_hs_func48mclk = { + .name = "usb_host_hs_func48mclk", .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT, + .clkdm_name = "l3_init_clkdm", + .parent = &func_48mc_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_host_hs_fck = { + .name = "usb_host_hs_fck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_SWCTRL, - .clkdm_name = "abe_clkdm", - .parent = &sys_32k_ck, + .clkdm_name = "l3_init_clkdm", + .parent = &init_60m_fclk, .recalc = &followparent_recalc, }; -/* Remaining optional clocks */ static const struct clksel otg_60m_gfclk_sel[] = { { .parent = &utmi_phy_clkout_ck, .rates = div_1_0_rates }, { .parent = &xclk60motg_ck, .rates = div_1_1_rates }, { .parent = NULL }, }; -static struct clk otg_60m_gfclk_ck = { - .name = "otg_60m_gfclk_ck", +static struct clk otg_60m_gfclk = { + .name = "otg_60m_gfclk", .parent = &utmi_phy_clkout_ck, .clksel = otg_60m_gfclk_sel, .init = &omap2_init_clksel_parent, @@ -2373,38 +2579,74 @@ static struct clk otg_60m_gfclk_ck = { .recalc = &omap2_clksel_recalc, }; -static const struct clksel stm_clk_div_div[] = { - { .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates }, - { .parent = NULL }, +static struct clk usb_otg_hs_xclk = { + .name = "usb_otg_hs_xclk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_XCLK_SHIFT, + .clkdm_name = "l3_init_clkdm", + .parent = &otg_60m_gfclk, + .recalc = &followparent_recalc, }; -static struct clk stm_clk_div_ck = { - .name = "stm_clk_div_ck", - .parent = &pmd_stm_clock_mux_ck, - .clksel = stm_clk_div_div, - .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_PMD_STM_CLK_MASK, - .ops = &clkops_null, - .recalc = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap2_clksel_set_rate, +static struct clk usb_otg_hs_ick = { + .name = "usb_otg_hs_ick", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, }; -static const struct clksel trace_clk_div_div[] = { - { .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates }, - { .parent = NULL }, +static struct clk usb_phy_cm_clk32k = { + .name = "usb_phy_cm_clk32k", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_USBPHY_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_CLK32K_SHIFT, + .clkdm_name = "l4_ao_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, }; -static struct clk trace_clk_div_ck = { - .name = "trace_clk_div_ck", - .parent = &pmd_trace_clk_mux_ck, - .clksel = trace_clk_div_div, - .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, - .ops = &clkops_null, - .recalc = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap2_clksel_set_rate, +static struct clk usb_tll_hs_usb_ch2_clk = { + .name = "usb_tll_hs_usb_ch2_clk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT, + .clkdm_name = "l3_init_clkdm", + .parent = &init_60m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_tll_hs_usb_ch0_clk = { + .name = "usb_tll_hs_usb_ch0_clk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT, + .clkdm_name = "l3_init_clkdm", + .parent = &init_60m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_tll_hs_usb_ch1_clk = { + .name = "usb_tll_hs_usb_ch1_clk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT, + .clkdm_name = "l3_init_clkdm", + .parent = &init_60m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_tll_hs_ick = { + .name = "usb_tll_hs_ick", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, }; static const struct clksel_rate div2_14to18_rates[] = { @@ -2418,8 +2660,8 @@ static const struct clksel usim_fclk_div[] = { { .parent = NULL }, }; -static struct clk usim_fclk = { - .name = "usim_fclk", +static struct clk usim_ck = { + .name = "usim_ck", .parent = &dpll_per_m4_ck, .clksel = usim_fclk_div, .clksel_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, @@ -2430,38 +2672,79 @@ static struct clk usim_fclk = { .set_rate = &omap2_clksel_set_rate, }; -static const struct clksel utmi_p1_gfclk_sel[] = { - { .parent = &init_60m_fclk, .rates = div_1_0_rates }, - { .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates }, +static struct clk usim_fclk = { + .name = "usim_fclk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, + .enable_bit = OMAP4430_OPTFCLKEN_FCLK_SHIFT, + .clkdm_name = "l4_wkup_clkdm", + .parent = &usim_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usim_fck = { + .name = "usim_fck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk wd_timer2_fck = { + .name = "wd_timer2_fck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk wd_timer3_fck = { + .name = "wd_timer3_fck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +/* Remaining optional clocks */ +static const struct clksel stm_clk_div_div[] = { + { .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates }, { .parent = NULL }, }; -static struct clk utmi_p1_gfclk_ck = { - .name = "utmi_p1_gfclk_ck", - .parent = &init_60m_fclk, - .clksel = utmi_p1_gfclk_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_UTMI_P1_MASK, +static struct clk stm_clk_div_ck = { + .name = "stm_clk_div_ck", + .parent = &pmd_stm_clock_mux_ck, + .clksel = stm_clk_div_div, + .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PMD_STM_CLK_MASK, .ops = &clkops_null, .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, }; -static const struct clksel utmi_p2_gfclk_sel[] = { - { .parent = &init_60m_fclk, .rates = div_1_0_rates }, - { .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates }, +static const struct clksel trace_clk_div_div[] = { + { .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates }, { .parent = NULL }, }; -static struct clk utmi_p2_gfclk_ck = { - .name = "utmi_p2_gfclk_ck", - .parent = &init_60m_fclk, - .clksel = utmi_p2_gfclk_sel, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, - .clksel_mask = OMAP4430_CLKSEL_UTMI_P2_MASK, +static struct clk trace_clk_div_ck = { + .name = "trace_clk_div_ck", + .parent = &pmd_trace_clk_mux_ck, + .clksel = trace_clk_div_div, + .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, .ops = &clkops_null, .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, }; /* @@ -2483,11 +2766,12 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "virt_27000000_ck", &virt_27000000_ck, CK_443X), CLK(NULL, "virt_38400000_ck", &virt_38400000_ck, CK_443X), CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_443X), + CLK(NULL, "tie_low_clock_ck", &tie_low_clock_ck, CK_443X), CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck, CK_443X), CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck, CK_443X), CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck, CK_443X), CLK(NULL, "xclk60motg_ck", &xclk60motg_ck, CK_443X), - CLK(NULL, "dpll_sys_ref_clk", &dpll_sys_ref_clk, CK_443X), + CLK(NULL, "abe_dpll_bypass_clk_mux_ck", &abe_dpll_bypass_clk_mux_ck, CK_443X), CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck, CK_443X), CLK(NULL, "dpll_abe_ck", &dpll_abe_ck, CK_443X), CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, CK_443X), @@ -2557,46 +2841,48 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "aes1_fck", &aes1_fck, CK_443X), CLK(NULL, "aes2_fck", &aes2_fck, CK_443X), CLK(NULL, "aess_fck", &aess_fck, CK_443X), - CLK(NULL, "cust_efuse_fck", &cust_efuse_fck, CK_443X), + CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X), CLK(NULL, "des3des_fck", &des3des_fck, CK_443X), CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), CLK(NULL, "dmic_fck", &dmic_fck, CK_443X), + CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), + CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X), + CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), + CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), + CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), CLK(NULL, "dss_fck", &dss_fck, CK_443X), - CLK(NULL, "ducati_ick", &ducati_ick, CK_443X), - CLK(NULL, "emif1_ick", &emif1_ick, CK_443X), - CLK(NULL, "emif2_ick", &emif2_ick, CK_443X), + CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), + CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), + CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), CLK(NULL, "fdif_fck", &fdif_fck, CK_443X), - CLK(NULL, "per_sgx_fclk", &per_sgx_fclk, CK_443X), - CLK(NULL, "gfx_fck", &gfx_fck, CK_443X), + CLK(NULL, "fpka_fck", &fpka_fck, CK_443X), + CLK(NULL, "gpio1_dbck", &gpio1_dbclk, CK_443X), CLK(NULL, "gpio1_ick", &gpio1_ick, CK_443X), + CLK(NULL, "gpio2_dbck", &gpio2_dbclk, CK_443X), CLK(NULL, "gpio2_ick", &gpio2_ick, CK_443X), + CLK(NULL, "gpio3_dbck", &gpio3_dbclk, CK_443X), CLK(NULL, "gpio3_ick", &gpio3_ick, CK_443X), + CLK(NULL, "gpio4_dbck", &gpio4_dbclk, CK_443X), CLK(NULL, "gpio4_ick", &gpio4_ick, CK_443X), + CLK(NULL, "gpio5_dbck", &gpio5_dbclk, CK_443X), CLK(NULL, "gpio5_ick", &gpio5_ick, CK_443X), + CLK(NULL, "gpio6_dbck", &gpio6_dbclk, CK_443X), CLK(NULL, "gpio6_ick", &gpio6_ick, CK_443X), CLK(NULL, "gpmc_ick", &gpmc_ick, CK_443X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_443X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_443X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_443X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_443X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_443X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_443X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_443X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_443X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_443X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_443X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_443X), + CLK(NULL, "gpu_fck", &gpu_fck, CK_443X), CLK("omap2_hdq.0", "fck", &hdq1w_fck, CK_443X), - CLK(NULL, "hsi_ick", &hsi_ick, CK_443X), + CLK(NULL, "hsi_fck", &hsi_fck, CK_443X), CLK("i2c_omap.1", "fck", &i2c1_fck, CK_443X), CLK("i2c_omap.2", "fck", &i2c2_fck, CK_443X), CLK("i2c_omap.3", "fck", &i2c3_fck, CK_443X), CLK("i2c_omap.4", "fck", &i2c4_fck, CK_443X), + CLK(NULL, "ipu_fck", &ipu_fck, CK_443X), + CLK(NULL, "iss_ctrlclk", &iss_ctrlclk, CK_443X), CLK(NULL, "iss_fck", &iss_fck, CK_443X), - CLK(NULL, "ivahd_ick", &ivahd_ick, CK_443X), - CLK(NULL, "keyboard_fck", &keyboard_fck, CK_443X), - CLK(NULL, "l3_instr_interconnect_ick", &l3_instr_interconnect_ick, CK_443X), - CLK(NULL, "l3_interconnect_3_ick", &l3_interconnect_3_ick, CK_443X), + CLK(NULL, "iva_fck", &iva_fck, CK_443X), + CLK(NULL, "kbd_fck", &kbd_fck, CK_443X), + CLK(NULL, "l3_instr_ick", &l3_instr_ick, CK_443X), + CLK(NULL, "l3_main_3_ick", &l3_main_3_ick, CK_443X), CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X), CLK(NULL, "mcasp_fck", &mcasp_fck, CK_443X), CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X), @@ -2607,6 +2893,7 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_443X), CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X), CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_443X), + CLK(NULL, "mcpdm_fck", &mcpdm_fck, CK_443X), CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_443X), CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_443X), CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_443X), @@ -2616,43 +2903,66 @@ static struct omap_clk omap44xx_clks[] = { CLK("mmci-omap-hs.2", "fck", &mmc3_fck, CK_443X), CLK("mmci-omap-hs.3", "fck", &mmc4_fck, CK_443X), CLK("mmci-omap-hs.4", "fck", &mmc5_fck, CK_443X), - CLK(NULL, "ocp_wp1_ick", &ocp_wp1_ick, CK_443X), - CLK(NULL, "pdm_fck", &pdm_fck, CK_443X), - CLK(NULL, "pkaeip29_fck", &pkaeip29_fck, CK_443X), + CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), + CLK(NULL, "ocp2scp_usb_phy_ick", &ocp2scp_usb_phy_ick, CK_443X), + CLK(NULL, "ocp_wp_noc_ick", &ocp_wp_noc_ick, CK_443X), CLK("omap_rng", "ick", &rng_ick, CK_443X), - CLK(NULL, "sha2md51_fck", &sha2md51_fck, CK_443X), - CLK(NULL, "sl2_ick", &sl2_ick, CK_443X), + CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), + CLK(NULL, "sl2if_ick", &sl2if_ick, CK_443X), + CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X), + CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X), + CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2, CK_443X), + CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk, CK_443X), CLK(NULL, "slimbus1_fck", &slimbus1_fck, CK_443X), + CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1, CK_443X), + CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0, CK_443X), + CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk, CK_443X), CLK(NULL, "slimbus2_fck", &slimbus2_fck, CK_443X), - CLK(NULL, "sr_core_fck", &sr_core_fck, CK_443X), - CLK(NULL, "sr_iva_fck", &sr_iva_fck, CK_443X), - CLK(NULL, "sr_mpu_fck", &sr_mpu_fck, CK_443X), - CLK(NULL, "tesla_ick", &tesla_ick, CK_443X), + CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X), + CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X), + CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X), + CLK(NULL, "gpt1_fck", &timer1_fck, CK_443X), + CLK(NULL, "gpt10_fck", &timer10_fck, CK_443X), + CLK(NULL, "gpt11_fck", &timer11_fck, CK_443X), + CLK(NULL, "gpt2_fck", &timer2_fck, CK_443X), + CLK(NULL, "gpt3_fck", &timer3_fck, CK_443X), + CLK(NULL, "gpt4_fck", &timer4_fck, CK_443X), + CLK(NULL, "gpt5_fck", &timer5_fck, CK_443X), + CLK(NULL, "gpt6_fck", &timer6_fck, CK_443X), + CLK(NULL, "gpt7_fck", &timer7_fck, CK_443X), + CLK(NULL, "gpt8_fck", &timer8_fck, CK_443X), + CLK(NULL, "gpt9_fck", &timer9_fck, CK_443X), CLK(NULL, "uart1_fck", &uart1_fck, CK_443X), CLK(NULL, "uart2_fck", &uart2_fck, CK_443X), CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), - CLK(NULL, "unipro1_fck", &unipro1_fck, CK_443X), - CLK(NULL, "usb_host_fck", &usb_host_fck, CK_443X), CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), - CLK("musb_hdrc", "ick", &usb_otg_ick, CK_443X), - CLK(NULL, "usb_tll_ick", &usb_tll_ick, CK_443X), - CLK(NULL, "usbphyocp2scp_ick", &usbphyocp2scp_ick, CK_443X), + CLK(NULL, "usb_host_hs_utmi_p3_clk", &usb_host_hs_utmi_p3_clk, CK_443X), + CLK(NULL, "usb_host_hs_hsic60m_p1_clk", &usb_host_hs_hsic60m_p1_clk, CK_443X), + CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X), + CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), + CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), + CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), + CLK(NULL, "usb_host_hs_utmi_p2_clk", &usb_host_hs_utmi_p2_clk, CK_443X), + CLK(NULL, "usb_host_hs_hsic480m_p1_clk", &usb_host_hs_hsic480m_p1_clk, CK_443X), + CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), + CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), + CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X), + CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), + CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), + CLK("musb_hdrc", "ick", &usb_otg_hs_ick, CK_443X), + CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X), + CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X), + CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), + CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), + CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X), + CLK(NULL, "usim_ck", &usim_ck, CK_443X), + CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), CLK(NULL, "usim_fck", &usim_fck, CK_443X), - CLK("omap_wdt", "fck", &wdt2_fck, CK_443X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_443X), - CLK(NULL, "otg_60m_gfclk_ck", &otg_60m_gfclk_ck, CK_443X), + CLK("omap_wdt", "fck", &wd_timer2_fck, CK_443X), + CLK(NULL, "wd_timer3_fck", &wd_timer3_fck, CK_443X), CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X), CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X), - CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), - CLK(NULL, "utmi_p1_gfclk_ck", &utmi_p1_gfclk_ck, CK_443X), - CLK(NULL, "utmi_p2_gfclk_ck", &utmi_p2_gfclk_ck, CK_443X), - CLK(NULL, "gpio1_dbck", &dummy_ck, CK_443X), - CLK(NULL, "gpio2_dbck", &dummy_ck, CK_443X), - CLK(NULL, "gpio3_dbck", &dummy_ck, CK_443X), - CLK(NULL, "gpio4_dbck", &dummy_ck, CK_443X), - CLK(NULL, "gpio5_dbck", &dummy_ck, CK_443X), - CLK(NULL, "gpio6_dbck", &dummy_ck, CK_443X), CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X), CLK(NULL, "gpt1_ick", &dummy_ck, CK_443X), CLK(NULL, "gpt2_ick", &dummy_ck, CK_443X), @@ -2669,19 +2979,19 @@ static struct omap_clk omap44xx_clks[] = { CLK("i2c_omap.2", "ick", &dummy_ck, CK_443X), CLK("i2c_omap.3", "ick", &dummy_ck, CK_443X), CLK("i2c_omap.4", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.0", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.1", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.2", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.3", "ick", &dummy_ck, CK_443X), + CLK("mmci-omap-hs.4", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X), CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X), - CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.0", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.1", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.2", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.3", "ick", &dummy_ck, CK_443X), - CLK("mmci-omap-hs.4", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X), + CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X), CLK(NULL, "uart1_ick", &dummy_ck, CK_443X), CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 5d80cb897489..6fb61b1a0d46 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -258,97 +258,6 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable) } -/** - * _init_wkdep_usecount - initialize wkdep usecounts to match hardware - * @clkdm: clockdomain to initialize wkdep usecounts - * - * Initialize the wakeup dependency usecount variables for clockdomain @clkdm. - * If a wakeup dependency is present in the hardware, the usecount will be - * set to 1; otherwise, it will be set to 0. Software should clear all - * software wakeup dependencies prior to calling this function if it wishes - * to ensure that all usecounts start at 0. No return value. - */ -static void _init_wkdep_usecount(struct clockdomain *clkdm) -{ - u32 v; - struct clkdm_dep *cd; - - if (!clkdm->wkdep_srcs) - return; - - for (cd = clkdm->wkdep_srcs; cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; - - if (!cd->clkdm && cd->clkdm_name) - cd->clkdm = _clkdm_lookup(cd->clkdm_name); - - if (!cd->clkdm) { - WARN(!cd->clkdm, "clockdomain: %s: wkdep clkdm %s not " - "found\n", clkdm->name, cd->clkdm_name); - continue; - } - - v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs, - PM_WKDEP, - (1 << cd->clkdm->dep_bit)); - - if (v) - pr_debug("clockdomain: %s: wakeup dependency already " - "set to wake up when %s wakes\n", - clkdm->name, cd->clkdm->name); - - atomic_set(&cd->wkdep_usecount, (v) ? 1 : 0); - } -} - -/** - * _init_sleepdep_usecount - initialize sleepdep usecounts to match hardware - * @clkdm: clockdomain to initialize sleepdep usecounts - * - * Initialize the sleep dependency usecount variables for clockdomain @clkdm. - * If a sleep dependency is present in the hardware, the usecount will be - * set to 1; otherwise, it will be set to 0. Software should clear all - * software sleep dependencies prior to calling this function if it wishes - * to ensure that all usecounts start at 0. No return value. - */ -static void _init_sleepdep_usecount(struct clockdomain *clkdm) -{ - u32 v; - struct clkdm_dep *cd; - - if (!cpu_is_omap34xx()) - return; - - if (!clkdm->sleepdep_srcs) - return; - - for (cd = clkdm->sleepdep_srcs; cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; - - if (!cd->clkdm && cd->clkdm_name) - cd->clkdm = _clkdm_lookup(cd->clkdm_name); - - if (!cd->clkdm) { - WARN(!cd->clkdm, "clockdomain: %s: sleepdep clkdm %s " - "not found\n", clkdm->name, cd->clkdm_name); - continue; - } - - v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs, - OMAP3430_CM_SLEEPDEP, - (1 << cd->clkdm->dep_bit)); - - if (v) - pr_debug("clockdomain: %s: sleep dependency already " - "set to prevent from idling until %s " - "idles\n", clkdm->name, cd->clkdm->name); - - atomic_set(&cd->sleepdep_usecount, (v) ? 1 : 0); - } -}; - /* Public functions */ /** @@ -379,12 +288,17 @@ void clkdm_init(struct clockdomain **clkdms, _autodep_lookup(autodep); /* - * Ensure that the *dep_usecount registers reflect the current - * state of the PRCM. + * Put all clockdomains into software-supervised mode; PM code + * should later enable hardware-supervised mode as appropriate */ list_for_each_entry(clkdm, &clkdm_list, node) { - _init_wkdep_usecount(clkdm); - _init_sleepdep_usecount(clkdm); + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap2_clkdm_wakeup(clkdm); + else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO) + omap2_clkdm_deny_idle(clkdm); + + clkdm_clear_all_wkdeps(clkdm); + clkdm_clear_all_sleepdeps(clkdm); } } @@ -592,6 +506,9 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) if (!omap_chip_is(cd->omap_chip)) continue; + if (!cd->clkdm && cd->clkdm_name) + cd->clkdm = _clkdm_lookup(cd->clkdm_name); + /* PRM accesses are slow, so minimize them */ mask |= 1 << cd->clkdm->dep_bit; atomic_set(&cd->wkdep_usecount, 0); @@ -752,6 +669,9 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) if (!omap_chip_is(cd->omap_chip)) continue; + if (!cd->clkdm && cd->clkdm_name) + cd->clkdm = _clkdm_lookup(cd->clkdm_name); + /* PRM accesses are slow, so minimize them */ mask |= 1 << cd->clkdm->dep_bit; atomic_set(&cd->sleepdep_usecount, 0); diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index fe82b79d5f3b..4f959a7d881c 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -649,6 +649,8 @@ #define OMAP3430_ST_MCBSP2_MASK (1 << 0) /* CM_AUTOIDLE_PER */ +#define OMAP3630_AUTO_UART4_MASK (1 << 18) +#define OMAP3630_AUTO_UART4_SHIFT 18 #define OMAP3430_AUTO_GPIO6_MASK (1 << 17) #define OMAP3430_AUTO_GPIO6_SHIFT 17 #define OMAP3430_AUTO_GPIO5_MASK (1 << 16) diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h index ac8458e43252..0b72be433776 100644 --- a/arch/arm/mach-omap2/cm-regbits-44xx.h +++ b/arch/arm/mach-omap2/cm-regbits-44xx.h @@ -1,8 +1,8 @@ /* * OMAP44xx Clock Management register bits * - * Copyright (C) 2009 Texas Instruments, Inc. - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) * Rajendra Nayak (rnayak@ti.com) @@ -25,453 +25,459 @@ #include "cm.h" -/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ +/* + * Used by CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP, + * CM_TESLA_DYNAMICDEP + */ #define OMAP4430_ABE_DYNDEP_SHIFT 3 -#define OMAP4430_ABE_DYNDEP_MASK BITFIELD(3, 3) +#define OMAP4430_ABE_DYNDEP_MASK (1 << 3) /* - * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, - * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, - * CM_TESLA_STATICDEP + * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP, + * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP */ #define OMAP4430_ABE_STATDEP_SHIFT 3 -#define OMAP4430_ABE_STATDEP_MASK BITFIELD(3, 3) +#define OMAP4430_ABE_STATDEP_MASK (1 << 3) -/* Used by CM_L4CFG_DYNAMICDEP */ +/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ #define OMAP4430_ALWONCORE_DYNDEP_SHIFT 16 -#define OMAP4430_ALWONCORE_DYNDEP_MASK BITFIELD(16, 16) +#define OMAP4430_ALWONCORE_DYNDEP_MASK (1 << 16) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_ALWONCORE_STATDEP_SHIFT 16 -#define OMAP4430_ALWONCORE_STATDEP_MASK BITFIELD(16, 16) +#define OMAP4430_ALWONCORE_STATDEP_MASK (1 << 16) /* - * Used by CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB, - * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE, - * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU + * Used by CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE, + * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_DDRPHY, + * CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER, + * CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB */ #define OMAP4430_AUTO_DPLL_MODE_SHIFT 0 -#define OMAP4430_AUTO_DPLL_MODE_MASK BITFIELD(0, 2) +#define OMAP4430_AUTO_DPLL_MODE_MASK (0x7 << 0) -/* Used by CM_L4CFG_DYNAMICDEP */ +/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ #define OMAP4430_CEFUSE_DYNDEP_SHIFT 17 -#define OMAP4430_CEFUSE_DYNDEP_MASK BITFIELD(17, 17) +#define OMAP4430_CEFUSE_DYNDEP_MASK (1 << 17) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_CEFUSE_STATDEP_SHIFT 17 -#define OMAP4430_CEFUSE_STATDEP_MASK BITFIELD(17, 17) +#define OMAP4430_CEFUSE_STATDEP_MASK (1 << 17) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT 13 -#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK BITFIELD(13, 13) +#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK (1 << 13) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT 12 -#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK BITFIELD(12, 12) +#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK (1 << 12) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK (1 << 9) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT 11 -#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK BITFIELD(11, 11) +#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK (1 << 11) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK (1 << 8) /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT 11 -#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK BITFIELD(11, 11) +#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK (1 << 11) /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT 12 -#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK BITFIELD(12, 12) +#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK (1 << 12) /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT 13 -#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK BITFIELD(13, 13) +#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK (1 << 13) /* Used by CM_CAM_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK (1 << 9) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_SHIFT 12 +#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_MASK (1 << 12) /* Used by CM_EMU_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK (1 << 9) /* Used by CM_CEFUSE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9) /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK (1 << 9) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK (1 << 9) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT 10 -#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK BITFIELD(10, 10) +#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK (1 << 10) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT 11 -#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK BITFIELD(11, 11) +#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK (1 << 11) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT 12 -#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK BITFIELD(12, 12) +#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK (1 << 12) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT 13 -#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK BITFIELD(13, 13) +#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK (1 << 13) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT 14 -#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK BITFIELD(14, 14) +#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK (1 << 14) /* Used by CM_DSS_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT 10 -#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK BITFIELD(10, 10) +#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK (1 << 10) /* Used by CM_DSS_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK (1 << 9) /* Used by CM_DUCATI_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK BITFIELD(8, 8) - -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ -#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT 10 -#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_MASK BITFIELD(10, 10) +#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK (1 << 8) /* Used by CM_EMU_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK (1 << 8) /* Used by CM_CAM_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT 10 -#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK BITFIELD(10, 10) +#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK (1 << 10) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT 15 -#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK BITFIELD(15, 15) +#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK (1 << 15) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT 10 -#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK BITFIELD(10, 10) +#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK (1 << 10) /* Used by CM_DSS_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT 11 -#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK BITFIELD(11, 11) +#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK (1 << 11) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT 20 -#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK BITFIELD(20, 20) +#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK (1 << 20) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT 26 -#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK BITFIELD(26, 26) +#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK (1 << 26) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT 21 -#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK BITFIELD(21, 21) +#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK (1 << 21) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT 27 -#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK BITFIELD(27, 27) - -/* Used by CM_L3INIT_CLKSTCTRL */ -#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT 31 -#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_MASK BITFIELD(31, 31) +#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK (1 << 27) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT 13 -#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK BITFIELD(13, 13) +#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK (1 << 13) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT 12 -#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK BITFIELD(12, 12) +#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK (1 << 12) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT 28 -#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK BITFIELD(28, 28) +#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK (1 << 28) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT 29 -#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK BITFIELD(29, 29) +#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK (1 << 29) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT 11 -#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK BITFIELD(11, 11) +#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK (1 << 11) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT 16 -#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK BITFIELD(16, 16) +#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK (1 << 16) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT 17 -#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK BITFIELD(17, 17) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK (1 << 17) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT 18 -#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK BITFIELD(18, 18) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK (1 << 18) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT 19 -#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK BITFIELD(19, 19) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK (1 << 19) /* Used by CM_CAM_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK (1 << 8) /* Used by CM_IVAHD_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK (1 << 8) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ -#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT 14 -#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_MASK BITFIELD(14, 14) +/* Used by CM_D2D_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK (1 << 10) /* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK (1 << 8) /* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK (1 << 8) /* Used by CM_D2D_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK (1 << 8) /* Used by CM_SDMA_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK (1 << 8) /* Used by CM_DSS_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK (1 << 8) /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK (1 << 8) /* Used by CM_GFX_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK (1 << 8) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK (1 << 8) /* Used by CM_L3INSTR_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK (1 << 8) /* Used by CM_L4SEC_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK (1 << 8) /* Used by CM_ALWON_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK (1 << 8) /* Used by CM_CEFUSE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8) /* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK (1 << 8) /* Used by CM_D2D_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK (1 << 9) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK (1 << 9) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK (1 << 8) /* Used by CM_L4SEC_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK (1 << 9) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT 12 -#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK BITFIELD(12, 12) +#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK (1 << 12) /* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK (1 << 8) /* Used by CM1_ABE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK (1 << 9) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT 16 -#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK BITFIELD(16, 16) +#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK (1 << 16) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT 17 -#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK BITFIELD(17, 17) +#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK (1 << 17) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT 18 -#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK BITFIELD(18, 18) +#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK (1 << 18) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT 19 -#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK BITFIELD(19, 19) +#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK (1 << 19) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT 25 -#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK BITFIELD(25, 25) - -/* Used by CM_EMU_CLKSTCTRL */ -#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT 10 -#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_MASK BITFIELD(10, 10) +#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK (1 << 25) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT 20 -#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK BITFIELD(20, 20) +#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK (1 << 20) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT 21 -#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK BITFIELD(21, 21) +#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK (1 << 21) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT 22 -#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK BITFIELD(22, 22) +#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK (1 << 22) /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT 24 -#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK BITFIELD(24, 24) +#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK (1 << 24) /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT 10 -#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK BITFIELD(10, 10) +#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK (1 << 10) /* Used by CM_GFX_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK (1 << 9) /* Used by CM_ALWON_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT 11 -#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK BITFIELD(11, 11) +#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK (1 << 11) /* Used by CM_ALWON_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT 10 -#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK BITFIELD(10, 10) +#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK (1 << 10) /* Used by CM_ALWON_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT 9 -#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK BITFIELD(9, 9) +#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK (1 << 9) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK (1 << 8) /* Used by CM_TESLA_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT 8 -#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK BITFIELD(8, 8) +#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK (1 << 8) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT 22 -#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK BITFIELD(22, 22) +#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK (1 << 22) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT 23 -#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK BITFIELD(23, 23) +#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK (1 << 23) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT 24 -#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK BITFIELD(24, 24) +#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK (1 << 24) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT 10 +#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK (1 << 10) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT 14 +#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK (1 << 14) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT 15 -#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK BITFIELD(15, 15) +#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK (1 << 15) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT 10 -#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK BITFIELD(10, 10) +#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK (1 << 10) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT 30 -#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK BITFIELD(30, 30) +#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK (1 << 30) /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT 25 -#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK BITFIELD(25, 25) +#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK (1 << 25) /* Used by CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT 11 -#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK BITFIELD(11, 11) +#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK (1 << 11) /* - * Used by CM_WKUP_TIMER1_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, + * CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, + * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, - * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, - * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, - * CM1_ABE_TIMER8_CLKCTRL + * CM_WKUP_TIMER1_CLKCTRL */ #define OMAP4430_CLKSEL_SHIFT 24 -#define OMAP4430_CLKSEL_MASK BITFIELD(24, 24) +#define OMAP4430_CLKSEL_MASK (1 << 24) /* * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL, - * CM_DPLL_SYS_REF_CLKSEL, CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT, - * CM_CLKSEL_USB_60MHZ + * CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ */ #define OMAP4430_CLKSEL_0_0_SHIFT 0 -#define OMAP4430_CLKSEL_0_0_MASK BITFIELD(0, 0) +#define OMAP4430_CLKSEL_0_0_MASK (1 << 0) /* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */ #define OMAP4430_CLKSEL_0_1_SHIFT 0 -#define OMAP4430_CLKSEL_0_1_MASK BITFIELD(0, 1) +#define OMAP4430_CLKSEL_0_1_MASK (0x3 << 0) /* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */ #define OMAP4430_CLKSEL_24_25_SHIFT 24 -#define OMAP4430_CLKSEL_24_25_MASK BITFIELD(24, 25) +#define OMAP4430_CLKSEL_24_25_MASK (0x3 << 24) /* Used by CM_L3INIT_USB_OTG_CLKCTRL */ #define OMAP4430_CLKSEL_60M_SHIFT 24 -#define OMAP4430_CLKSEL_60M_MASK BITFIELD(24, 24) +#define OMAP4430_CLKSEL_60M_MASK (1 << 24) /* Used by CM1_ABE_AESS_CLKCTRL */ #define OMAP4430_CLKSEL_AESS_FCLK_SHIFT 24 -#define OMAP4430_CLKSEL_AESS_FCLK_MASK BITFIELD(24, 24) +#define OMAP4430_CLKSEL_AESS_FCLK_MASK (1 << 24) -/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +/* Used by CM_CLKSEL_CORE, CM_CLKSEL_CORE_RESTORE */ #define OMAP4430_CLKSEL_CORE_SHIFT 0 -#define OMAP4430_CLKSEL_CORE_MASK BITFIELD(0, 0) +#define OMAP4430_CLKSEL_CORE_MASK (1 << 0) -/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */ +/* + * Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2_RESTORE, + * CM_SHADOW_FREQ_CONFIG2 + */ #define OMAP4430_CLKSEL_CORE_1_1_SHIFT 1 -#define OMAP4430_CLKSEL_CORE_1_1_MASK BITFIELD(1, 1) +#define OMAP4430_CLKSEL_CORE_1_1_MASK (1 << 1) /* Used by CM_WKUP_USIM_CLKCTRL */ #define OMAP4430_CLKSEL_DIV_SHIFT 24 -#define OMAP4430_CLKSEL_DIV_MASK BITFIELD(24, 24) +#define OMAP4430_CLKSEL_DIV_MASK (1 << 24) /* Used by CM_CAM_FDIF_CLKCTRL */ #define OMAP4430_CLKSEL_FCLK_SHIFT 24 -#define OMAP4430_CLKSEL_FCLK_MASK BITFIELD(24, 25) +#define OMAP4430_CLKSEL_FCLK_MASK (0x3 << 24) /* Used by CM_L4PER_MCBSP4_CLKCTRL */ #define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT 25 -#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK BITFIELD(25, 25) +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK (1 << 25) /* * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL, @@ -479,836 +485,869 @@ * CM1_ABE_MCBSP3_CLKCTRL */ #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT 26 -#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK BITFIELD(26, 27) +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK (0x3 << 26) -/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +/* Used by CM_CLKSEL_CORE, CM_CLKSEL_CORE_RESTORE */ #define OMAP4430_CLKSEL_L3_SHIFT 4 -#define OMAP4430_CLKSEL_L3_MASK BITFIELD(4, 4) +#define OMAP4430_CLKSEL_L3_MASK (1 << 4) -/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */ +/* + * Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2_RESTORE, + * CM_SHADOW_FREQ_CONFIG2 + */ #define OMAP4430_CLKSEL_L3_SHADOW_SHIFT 2 -#define OMAP4430_CLKSEL_L3_SHADOW_MASK BITFIELD(2, 2) +#define OMAP4430_CLKSEL_L3_SHADOW_MASK (1 << 2) -/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +/* Used by CM_CLKSEL_CORE, CM_CLKSEL_CORE_RESTORE */ #define OMAP4430_CLKSEL_L4_SHIFT 8 -#define OMAP4430_CLKSEL_L4_MASK BITFIELD(8, 8) +#define OMAP4430_CLKSEL_L4_MASK (1 << 8) /* Used by CM_CLKSEL_ABE */ #define OMAP4430_CLKSEL_OPP_SHIFT 0 -#define OMAP4430_CLKSEL_OPP_MASK BITFIELD(0, 1) - -/* Used by CM_GFX_GFX_CLKCTRL */ -#define OMAP4430_CLKSEL_PER_192M_SHIFT 25 -#define OMAP4430_CLKSEL_PER_192M_MASK BITFIELD(25, 26) +#define OMAP4430_CLKSEL_OPP_MASK (0x3 << 0) /* Used by CM_EMU_DEBUGSS_CLKCTRL */ #define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT 27 -#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK BITFIELD(27, 29) +#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK (0x7 << 27) /* Used by CM_EMU_DEBUGSS_CLKCTRL */ #define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT 24 -#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK BITFIELD(24, 26) +#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK (0x7 << 24) /* Used by CM_GFX_GFX_CLKCTRL */ #define OMAP4430_CLKSEL_SGX_FCLK_SHIFT 24 -#define OMAP4430_CLKSEL_SGX_FCLK_MASK BITFIELD(24, 24) +#define OMAP4430_CLKSEL_SGX_FCLK_MASK (1 << 24) /* * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL */ #define OMAP4430_CLKSEL_SOURCE_SHIFT 24 -#define OMAP4430_CLKSEL_SOURCE_MASK BITFIELD(24, 25) +#define OMAP4430_CLKSEL_SOURCE_MASK (0x3 << 24) /* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */ #define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT 24 -#define OMAP4430_CLKSEL_SOURCE_24_24_MASK BITFIELD(24, 24) +#define OMAP4430_CLKSEL_SOURCE_24_24_MASK (1 << 24) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_CLKSEL_UTMI_P1_SHIFT 24 -#define OMAP4430_CLKSEL_UTMI_P1_MASK BITFIELD(24, 24) +#define OMAP4430_CLKSEL_UTMI_P1_MASK (1 << 24) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_CLKSEL_UTMI_P2_SHIFT 25 -#define OMAP4430_CLKSEL_UTMI_P2_MASK BITFIELD(25, 25) +#define OMAP4430_CLKSEL_UTMI_P2_MASK (1 << 25) /* - * Used by CM_WKUP_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_D2D_CLKSTCTRL, - * CM_DUCATI_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL, - * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_MEMIF_CLKSTCTRL, - * CM_SDMA_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL, - * CM_L3INIT_CLKSTCTRL, CM_CAM_CLKSTCTRL, CM_CEFUSE_CLKSTCTRL, - * CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3_1_CLKSTCTRL_RESTORE, - * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL_RESTORE, - * CM_L4PER_CLKSTCTRL_RESTORE, CM_MEMIF_CLKSTCTRL_RESTORE, CM_ALWON_CLKSTCTRL, - * CM_IVAHD_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_TESLA_CLKSTCTRL, - * CM1_ABE_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE + * Used by CM1_ABE_CLKSTCTRL, CM_ALWON_CLKSTCTRL, CM_CAM_CLKSTCTRL, + * CM_CEFUSE_CLKSTCTRL, CM_D2D_CLKSTCTRL, CM_DSS_CLKSTCTRL, + * CM_DUCATI_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_IVAHD_CLKSTCTRL, + * CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3INSTR_CLKSTCTRL, + * CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE, CM_L3_2_CLKSTCTRL, + * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE, + * CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE, CM_L4SEC_CLKSTCTRL, + * CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE, CM_MPU_CLKSTCTRL, + * CM_MPU_CLKSTCTRL_RESTORE, CM_SDMA_CLKSTCTRL, CM_TESLA_CLKSTCTRL, + * CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKTRCTRL_SHIFT 0 -#define OMAP4430_CLKTRCTRL_MASK BITFIELD(0, 1) +#define OMAP4430_CLKTRCTRL_MASK (0x3 << 0) /* Used by CM_EMU_OVERRIDE_DPLL_CORE */ #define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT 0 -#define OMAP4430_CORE_DPLL_EMU_DIV_MASK BITFIELD(0, 6) +#define OMAP4430_CORE_DPLL_EMU_DIV_MASK (0x7f << 0) /* Used by CM_EMU_OVERRIDE_DPLL_CORE */ #define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT 8 -#define OMAP4430_CORE_DPLL_EMU_MULT_MASK BITFIELD(8, 18) +#define OMAP4430_CORE_DPLL_EMU_MULT_MASK (0x7ff << 8) + +/* Used by REVISION_CM1, REVISION_CM2 */ +#define OMAP4430_CUSTOM_SHIFT 6 +#define OMAP4430_CUSTOM_MASK (0x3 << 6) -/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +/* + * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, + * CM_L4CFG_DYNAMICDEP_RESTORE + */ #define OMAP4430_D2D_DYNDEP_SHIFT 18 -#define OMAP4430_D2D_DYNDEP_MASK BITFIELD(18, 18) +#define OMAP4430_D2D_DYNDEP_MASK (1 << 18) /* Used by CM_MPU_STATICDEP */ #define OMAP4430_D2D_STATDEP_SHIFT 18 -#define OMAP4430_D2D_STATDEP_MASK BITFIELD(18, 18) +#define OMAP4430_D2D_STATDEP_MASK (1 << 18) /* - * Used by CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO, - * CM_SSC_DELTAMSTEP_DPLL_USB, CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE, - * CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE, - * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA, - * CM_SSC_DELTAMSTEP_DPLL_MPU + * Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE, + * CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE, CM_SSC_DELTAMSTEP_DPLL_DDRPHY, + * CM_SSC_DELTAMSTEP_DPLL_IVA, CM_SSC_DELTAMSTEP_DPLL_MPU, + * CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO, + * CM_SSC_DELTAMSTEP_DPLL_USB */ #define OMAP4430_DELTAMSTEP_SHIFT 0 -#define OMAP4430_DELTAMSTEP_MASK BITFIELD(0, 19) +#define OMAP4430_DELTAMSTEP_MASK (0xfffff << 0) -/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ #define OMAP4430_DLL_OVERRIDE_SHIFT 2 -#define OMAP4430_DLL_OVERRIDE_MASK BITFIELD(2, 2) +#define OMAP4430_DLL_OVERRIDE_MASK (1 << 2) /* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */ #define OMAP4430_DLL_OVERRIDE_0_0_SHIFT 0 -#define OMAP4430_DLL_OVERRIDE_0_0_MASK BITFIELD(0, 0) +#define OMAP4430_DLL_OVERRIDE_0_0_MASK (1 << 0) -/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ #define OMAP4430_DLL_RESET_SHIFT 3 -#define OMAP4430_DLL_RESET_MASK BITFIELD(3, 3) +#define OMAP4430_DLL_RESET_MASK (1 << 3) /* - * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB, - * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, - * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, + * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, + * CM_CLKSEL_DPLL_USB */ #define OMAP4430_DPLL_BYP_CLKSEL_SHIFT 23 -#define OMAP4430_DPLL_BYP_CLKSEL_MASK BITFIELD(23, 23) +#define OMAP4430_DPLL_BYP_CLKSEL_MASK (1 << 23) /* Used by CM_CLKDCOLDO_DPLL_USB */ #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8 -#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK BITFIELD(8, 8) +#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8) -/* Used by CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_CORE */ +/* Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_CORE_RESTORE */ #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT 20 -#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK BITFIELD(20, 20) +#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK (1 << 20) /* - * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, - * CM_DIV_M3_DPLL_CORE + * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, + * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT 0 -#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK BITFIELD(0, 4) +#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK (0x1f << 0) /* - * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, - * CM_DIV_M3_DPLL_CORE + * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, + * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT 5 -#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK BITFIELD(5, 5) +#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK (1 << 5) /* - * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, - * CM_DIV_M3_DPLL_CORE + * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, + * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT 8 -#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK BITFIELD(8, 8) +#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK (1 << 8) -/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */ +/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT 10 -#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BITFIELD(10, 10) +#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10) /* - * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, - * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, - * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU + * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_DPLL_CLKOUT_DIV_SHIFT 0 -#define OMAP4430_DPLL_CLKOUT_DIV_MASK BITFIELD(0, 4) +#define OMAP4430_DPLL_CLKOUT_DIV_MASK (0x1f << 0) /* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */ #define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT 0 -#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK BITFIELD(0, 6) +#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK (0x7f << 0) /* - * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, - * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, - * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU + * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT 5 -#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK BITFIELD(5, 5) +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5) /* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */ #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT 7 -#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK BITFIELD(7, 7) +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK (1 << 7) /* - * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE, - * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, - * CM_DIV_M2_DPLL_MPU + * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB */ #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT 8 -#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BITFIELD(8, 8) +#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) -/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ #define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT 8 -#define OMAP4430_DPLL_CORE_DPLL_EN_MASK BITFIELD(8, 10) +#define OMAP4430_DPLL_CORE_DPLL_EN_MASK (0x7 << 8) -/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ #define OMAP4430_DPLL_CORE_M2_DIV_SHIFT 11 -#define OMAP4430_DPLL_CORE_M2_DIV_MASK BITFIELD(11, 15) +#define OMAP4430_DPLL_CORE_M2_DIV_MASK (0x1f << 11) -/* Used by CM_SHADOW_FREQ_CONFIG2 */ +/* Used by CM_SHADOW_FREQ_CONFIG2, CM_SHADOW_FREQ_CONFIG2_RESTORE */ #define OMAP4430_DPLL_CORE_M5_DIV_SHIFT 3 -#define OMAP4430_DPLL_CORE_M5_DIV_MASK BITFIELD(3, 7) - -/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ -#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT 1 -#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_MASK BITFIELD(1, 1) +#define OMAP4430_DPLL_CORE_M5_DIV_MASK (0x1f << 3) /* - * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, - * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, - * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, + * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO */ #define OMAP4430_DPLL_DIV_SHIFT 0 -#define OMAP4430_DPLL_DIV_MASK BITFIELD(0, 6) +#define OMAP4430_DPLL_DIV_MASK (0x7f << 0) /* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */ #define OMAP4430_DPLL_DIV_0_7_SHIFT 0 -#define OMAP4430_DPLL_DIV_0_7_MASK BITFIELD(0, 7) +#define OMAP4430_DPLL_DIV_0_7_MASK (0xff << 0) /* - * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_USB, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER */ #define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT 8 -#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK BITFIELD(8, 8) +#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK (1 << 8) /* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */ #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT 3 -#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK BITFIELD(3, 3) +#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK (1 << 3) /* - * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_EN_SHIFT 0 -#define OMAP4430_DPLL_EN_MASK BITFIELD(0, 2) +#define OMAP4430_DPLL_EN_MASK (0x7 << 0) /* - * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO */ #define OMAP4430_DPLL_LPMODE_EN_SHIFT 10 -#define OMAP4430_DPLL_LPMODE_EN_MASK BITFIELD(10, 10) +#define OMAP4430_DPLL_LPMODE_EN_MASK (1 << 10) /* - * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, - * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, - * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, + * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO */ #define OMAP4430_DPLL_MULT_SHIFT 8 -#define OMAP4430_DPLL_MULT_MASK BITFIELD(8, 18) +#define OMAP4430_DPLL_MULT_MASK (0x7ff << 8) /* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */ #define OMAP4430_DPLL_MULT_USB_SHIFT 8 -#define OMAP4430_DPLL_MULT_USB_MASK BITFIELD(8, 19) +#define OMAP4430_DPLL_MULT_USB_MASK (0xfff << 8) /* - * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO */ #define OMAP4430_DPLL_REGM4XEN_SHIFT 11 -#define OMAP4430_DPLL_REGM4XEN_MASK BITFIELD(11, 11) +#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11) /* Used by CM_CLKSEL_DPLL_USB */ #define OMAP4430_DPLL_SD_DIV_SHIFT 24 -#define OMAP4430_DPLL_SD_DIV_MASK BITFIELD(24, 31) +#define OMAP4430_DPLL_SD_DIV_MASK (0xff << 24) /* - * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_SSC_ACK_SHIFT 13 -#define OMAP4430_DPLL_SSC_ACK_MASK BITFIELD(13, 13) +#define OMAP4430_DPLL_SSC_ACK_MASK (1 << 13) /* - * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT 14 -#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK BITFIELD(14, 14) +#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK (1 << 14) /* - * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, + * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_SSC_EN_SHIFT 12 -#define OMAP4430_DPLL_SSC_EN_MASK BITFIELD(12, 12) +#define OMAP4430_DPLL_SSC_EN_MASK (1 << 12) -/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +/* + * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, + * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, CM_L4PER_DYNAMICDEP_RESTORE + */ #define OMAP4430_DSS_DYNDEP_SHIFT 8 -#define OMAP4430_DSS_DYNDEP_MASK BITFIELD(8, 8) +#define OMAP4430_DSS_DYNDEP_MASK (1 << 8) /* - * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, - * CM_MPU_STATICDEP + * Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE */ #define OMAP4430_DSS_STATDEP_SHIFT 8 -#define OMAP4430_DSS_STATDEP_MASK BITFIELD(8, 8) +#define OMAP4430_DSS_STATDEP_MASK (1 << 8) -/* Used by CM_L3_2_DYNAMICDEP */ +/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE */ #define OMAP4430_DUCATI_DYNDEP_SHIFT 0 -#define OMAP4430_DUCATI_DYNDEP_MASK BITFIELD(0, 0) +#define OMAP4430_DUCATI_DYNDEP_MASK (1 << 0) -/* Used by CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP */ +/* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE */ #define OMAP4430_DUCATI_STATDEP_SHIFT 0 -#define OMAP4430_DUCATI_STATDEP_MASK BITFIELD(0, 0) +#define OMAP4430_DUCATI_STATDEP_MASK (1 << 0) -/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ #define OMAP4430_FREQ_UPDATE_SHIFT 0 -#define OMAP4430_FREQ_UPDATE_MASK BITFIELD(0, 0) +#define OMAP4430_FREQ_UPDATE_MASK (1 << 0) + +/* Used by REVISION_CM1, REVISION_CM2 */ +#define OMAP4430_FUNC_SHIFT 16 +#define OMAP4430_FUNC_MASK (0xfff << 16) -/* Used by CM_L3_2_DYNAMICDEP */ +/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE */ #define OMAP4430_GFX_DYNDEP_SHIFT 10 -#define OMAP4430_GFX_DYNDEP_MASK BITFIELD(10, 10) +#define OMAP4430_GFX_DYNDEP_MASK (1 << 10) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ #define OMAP4430_GFX_STATDEP_SHIFT 10 -#define OMAP4430_GFX_STATDEP_MASK BITFIELD(10, 10) +#define OMAP4430_GFX_STATDEP_MASK (1 << 10) -/* Used by CM_SHADOW_FREQ_CONFIG2 */ +/* Used by CM_SHADOW_FREQ_CONFIG2, CM_SHADOW_FREQ_CONFIG2_RESTORE */ #define OMAP4430_GPMC_FREQ_UPDATE_SHIFT 0 -#define OMAP4430_GPMC_FREQ_UPDATE_MASK BITFIELD(0, 0) +#define OMAP4430_GPMC_FREQ_UPDATE_MASK (1 << 0) /* - * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT 0 -#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK BITFIELD(0, 4) +#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0) /* - * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5 -#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK BITFIELD(5, 5) +#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5) /* - * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8 -#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK BITFIELD(8, 8) +#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8) /* - * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12 -#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK BITFIELD(12, 12) +#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12) /* - * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT 0 -#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK BITFIELD(0, 4) +#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0) /* - * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5 -#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK BITFIELD(5, 5) +#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5) /* - * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8 -#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK BITFIELD(8, 8) +#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8) /* - * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12 -#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK BITFIELD(12, 12) +#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12) /* - * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT 0 -#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK BITFIELD(0, 4) +#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK (0x1f << 0) /* - * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5 -#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK BITFIELD(5, 5) +#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5) /* - * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8 -#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK BITFIELD(8, 8) +#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8) /* - * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12 -#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK BITFIELD(12, 12) +#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12) /* - * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_CORE + * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT 0 -#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK BITFIELD(0, 4) +#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK (0x1f << 0) /* - * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_CORE + * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT 5 -#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK BITFIELD(5, 5) +#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK (1 << 5) /* - * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_CORE + * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT 8 -#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK BITFIELD(8, 8) +#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK (1 << 8) /* - * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_CORE + * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT 12 -#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK BITFIELD(12, 12) - -/* - * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, - * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, - * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, - * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, - * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, - * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, - * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, - * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, - * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, - * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, - * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, - * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, - * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, - * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, - * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, - * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, - * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, - * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, - * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, - * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, - * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, - * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, - * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, - * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, - * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, - * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, - * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, - * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, - * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, - * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, +#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK (1 << 12) + +/* + * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, + * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, + * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, + * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, + * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL, + * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, + * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, + * CM_CM1_PROFILING_CLKCTRL, CM_CM1_PROFILING_CLKCTRL_RESTORE, + * CM_CM2_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL_RESTORE, + * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, + * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, + * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, - * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, - * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, - * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, - * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, - * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, - * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE, - * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, - * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE, - * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, - * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL, - * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, - * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL, - * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, - * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL, - * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL, - * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, - * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_HOST_FS_CLKCTRL, + * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, CM_L3INIT_XHPI_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL_RESTORE, + * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, + * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL, + * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL, + * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL, + * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL, + * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL, + * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, + * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL_RESTORE, + * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL_RESTORE, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL_RESTORE, + * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, + * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, + * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, + * CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, + * CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, + * CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, + * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL, + * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, + * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, + * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, + * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL, + * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, + * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, + * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL, + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, + * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, + * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL */ #define OMAP4430_IDLEST_SHIFT 16 -#define OMAP4430_IDLEST_MASK BITFIELD(16, 17) +#define OMAP4430_IDLEST_MASK (0x3 << 16) -/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +/* + * Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, + * CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE + */ #define OMAP4430_ISS_DYNDEP_SHIFT 9 -#define OMAP4430_ISS_DYNDEP_MASK BITFIELD(9, 9) +#define OMAP4430_ISS_DYNDEP_MASK (1 << 9) /* - * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, - * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + * Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP */ #define OMAP4430_ISS_STATDEP_SHIFT 9 -#define OMAP4430_ISS_STATDEP_MASK BITFIELD(9, 9) +#define OMAP4430_ISS_STATDEP_MASK (1 << 9) -/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ +/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_TESLA_DYNAMICDEP */ #define OMAP4430_IVAHD_DYNDEP_SHIFT 2 -#define OMAP4430_IVAHD_DYNDEP_MASK BITFIELD(2, 2) +#define OMAP4430_IVAHD_DYNDEP_MASK (1 << 2) /* - * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, - * CM_GFX_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_DSS_STATICDEP, CM_MPU_STATICDEP, - * CM_TESLA_STATICDEP + * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, + * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, + * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP */ #define OMAP4430_IVAHD_STATDEP_SHIFT 2 -#define OMAP4430_IVAHD_STATDEP_MASK BITFIELD(2, 2) +#define OMAP4430_IVAHD_STATDEP_MASK (1 << 2) -/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +/* + * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, + * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, CM_L4PER_DYNAMICDEP_RESTORE + */ #define OMAP4430_L3INIT_DYNDEP_SHIFT 7 -#define OMAP4430_L3INIT_DYNDEP_MASK BITFIELD(7, 7) +#define OMAP4430_L3INIT_DYNDEP_MASK (1 << 7) /* - * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP + * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP, + * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_TESLA_STATICDEP */ #define OMAP4430_L3INIT_STATDEP_SHIFT 7 -#define OMAP4430_L3INIT_STATDEP_MASK BITFIELD(7, 7) +#define OMAP4430_L3INIT_STATDEP_MASK (1 << 7) /* - * Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, - * CM_DSS_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + * Used by CM_DSS_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3_2_DYNAMICDEP, + * CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, + * CM_L4CFG_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_L3_1_DYNDEP_SHIFT 5 -#define OMAP4430_L3_1_DYNDEP_MASK BITFIELD(5, 5) +#define OMAP4430_L3_1_DYNDEP_MASK (1 << 5) /* - * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, - * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, - * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, + * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP, + * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, + * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP */ #define OMAP4430_L3_1_STATDEP_SHIFT 5 -#define OMAP4430_L3_1_STATDEP_MASK BITFIELD(5, 5) +#define OMAP4430_L3_1_STATDEP_MASK (1 << 5) /* - * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, - * CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_SDMA_DYNAMICDEP, - * CM_GFX_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, - * CM_CAM_DYNAMICDEP, CM_IVAHD_DYNAMICDEP + * Used by CM_CAM_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_D2D_DYNAMICDEP_RESTORE, + * CM_DUCATI_DYNAMICDEP, CM_EMU_DYNAMICDEP, CM_GFX_DYNAMICDEP, + * CM_IVAHD_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3_1_DYNAMICDEP, + * CM_L3_1_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, + * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP */ #define OMAP4430_L3_2_DYNDEP_SHIFT 6 -#define OMAP4430_L3_2_DYNDEP_MASK BITFIELD(6, 6) +#define OMAP4430_L3_2_DYNDEP_MASK (1 << 6) /* - * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, - * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, - * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, + * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP, + * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, + * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP */ #define OMAP4430_L3_2_STATDEP_SHIFT 6 -#define OMAP4430_L3_2_STATDEP_MASK BITFIELD(6, 6) +#define OMAP4430_L3_2_STATDEP_MASK (1 << 6) -/* Used by CM_L3_1_DYNAMICDEP */ +/* Used by CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE */ #define OMAP4430_L4CFG_DYNDEP_SHIFT 12 -#define OMAP4430_L4CFG_DYNDEP_MASK BITFIELD(12, 12) +#define OMAP4430_L4CFG_DYNDEP_MASK (1 << 12) /* - * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, - * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, - * CM_TESLA_STATICDEP + * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP, + * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP */ #define OMAP4430_L4CFG_STATDEP_SHIFT 12 -#define OMAP4430_L4CFG_STATDEP_MASK BITFIELD(12, 12) +#define OMAP4430_L4CFG_STATDEP_MASK (1 << 12) -/* Used by CM_L3_2_DYNAMICDEP */ +/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE */ #define OMAP4430_L4PER_DYNDEP_SHIFT 13 -#define OMAP4430_L4PER_DYNDEP_MASK BITFIELD(13, 13) +#define OMAP4430_L4PER_DYNDEP_MASK (1 << 13) /* - * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, - * CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, - * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP, + * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, + * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP */ #define OMAP4430_L4PER_STATDEP_SHIFT 13 -#define OMAP4430_L4PER_STATDEP_MASK BITFIELD(13, 13) +#define OMAP4430_L4PER_STATDEP_MASK (1 << 13) -/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +/* + * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, + * CM_L4PER_DYNAMICDEP_RESTORE + */ #define OMAP4430_L4SEC_DYNDEP_SHIFT 14 -#define OMAP4430_L4SEC_DYNDEP_MASK BITFIELD(14, 14) +#define OMAP4430_L4SEC_DYNDEP_MASK (1 << 14) /* - * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP + * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, + * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE */ #define OMAP4430_L4SEC_STATDEP_SHIFT 14 -#define OMAP4430_L4SEC_STATDEP_MASK BITFIELD(14, 14) +#define OMAP4430_L4SEC_STATDEP_MASK (1 << 14) -/* Used by CM_L4CFG_DYNAMICDEP */ +/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ #define OMAP4430_L4WKUP_DYNDEP_SHIFT 15 -#define OMAP4430_L4WKUP_DYNDEP_MASK BITFIELD(15, 15) +#define OMAP4430_L4WKUP_DYNDEP_MASK (1 << 15) /* - * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP + * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, + * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP */ #define OMAP4430_L4WKUP_STATDEP_SHIFT 15 -#define OMAP4430_L4WKUP_STATDEP_MASK BITFIELD(15, 15) +#define OMAP4430_L4WKUP_STATDEP_MASK (1 << 15) /* - * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, - * CM_MPU_DYNAMICDEP + * Used by CM_D2D_DYNAMICDEP, CM_D2D_DYNAMICDEP_RESTORE, CM_L3_1_DYNAMICDEP, + * CM_L3_1_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, + * CM_L4CFG_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP */ #define OMAP4430_MEMIF_DYNDEP_SHIFT 4 -#define OMAP4430_MEMIF_DYNDEP_MASK BITFIELD(4, 4) +#define OMAP4430_MEMIF_DYNDEP_MASK (1 << 4) /* - * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, - * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, - * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, + * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP, + * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, + * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP */ #define OMAP4430_MEMIF_STATDEP_SHIFT 4 -#define OMAP4430_MEMIF_STATDEP_MASK BITFIELD(4, 4) +#define OMAP4430_MEMIF_STATDEP_MASK (1 << 4) /* - * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, - * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, - * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, - * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, - * CM_SSC_MODFREQDIV_DPLL_MPU + * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, CM_SSC_MODFREQDIV_DPLL_DDRPHY, + * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, + * CM_SSC_MODFREQDIV_DPLL_USB */ #define OMAP4430_MODFREQDIV_EXPONENT_SHIFT 8 -#define OMAP4430_MODFREQDIV_EXPONENT_MASK BITFIELD(8, 10) +#define OMAP4430_MODFREQDIV_EXPONENT_MASK (0x7 << 8) /* - * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, - * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, - * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, - * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, - * CM_SSC_MODFREQDIV_DPLL_MPU + * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, CM_SSC_MODFREQDIV_DPLL_DDRPHY, + * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU, + * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, + * CM_SSC_MODFREQDIV_DPLL_USB */ #define OMAP4430_MODFREQDIV_MANTISSA_SHIFT 0 -#define OMAP4430_MODFREQDIV_MANTISSA_MASK BITFIELD(0, 6) - -/* - * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, - * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, - * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, - * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, - * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, - * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, - * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, - * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, - * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, - * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, - * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, - * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, - * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, - * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, - * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, - * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, - * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, - * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, - * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, - * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, - * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, - * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, - * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, - * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, - * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, - * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, - * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, - * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, - * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, - * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, +#define OMAP4430_MODFREQDIV_MANTISSA_MASK (0x7f << 0) + +/* + * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, + * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, + * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, + * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, + * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL, + * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, + * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, + * CM_CM1_PROFILING_CLKCTRL, CM_CM1_PROFILING_CLKCTRL_RESTORE, + * CM_CM2_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL_RESTORE, + * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, + * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, + * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, - * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, - * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, - * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, - * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, - * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, - * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE, - * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, - * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE, - * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, - * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL, - * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, - * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL, - * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, - * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL, - * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL, - * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, - * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_HOST_FS_CLKCTRL, + * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, CM_L3INIT_XHPI_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL_RESTORE, + * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, + * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL, + * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL, + * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL, + * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL, + * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL, + * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, + * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL_RESTORE, + * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL_RESTORE, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL_RESTORE, + * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, + * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, + * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, + * CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, + * CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, + * CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, + * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL, + * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, + * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, + * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, + * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL, + * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, + * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, + * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL, + * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, + * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, + * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL */ #define OMAP4430_MODULEMODE_SHIFT 0 -#define OMAP4430_MODULEMODE_MASK BITFIELD(0, 1) +#define OMAP4430_MODULEMODE_MASK (0x3 << 0) /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT 9 -#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK BITFIELD(9, 9) +#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK (1 << 9) /* Used by CM_WKUP_BANDGAP_CLKCTRL */ #define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT 8 -#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK (1 << 8) -/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */ -#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT 9 -#define OMAP4430_OPTFCLKEN_CLK32K_MASK BITFIELD(9, 9) +/* Used by CM_ALWON_USBPHY_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT 8 +#define OMAP4430_OPTFCLKEN_CLK32K_MASK (1 << 8) /* Used by CM_CAM_ISS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT 8 -#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK (1 << 8) /* - * Used by CM_WKUP_GPIO1_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, - * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, - * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, - * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, - * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE + * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL_RESTORE, + * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL_RESTORE, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL_RESTORE, CM_WKUP_GPIO1_CLKCTRL */ #define OMAP4430_OPTFCLKEN_DBCLK_SHIFT 8 -#define OMAP4430_OPTFCLKEN_DBCLK_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_DBCLK_MASK (1 << 8) /* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */ #define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT 8 -#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK (1 << 8) /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT 8 -#define OMAP4430_OPTFCLKEN_DSSCLK_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_DSSCLK_MASK (1 << 8) + +/* Used by CM_WKUP_USIM_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK_SHIFT 8 +#define OMAP4430_OPTFCLKEN_FCLK_MASK (1 << 8) /* Used by CM1_ABE_SLIMBUS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_FCLK0_SHIFT 8 -#define OMAP4430_OPTFCLKEN_FCLK0_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_FCLK0_MASK (1 << 8) /* Used by CM1_ABE_SLIMBUS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_FCLK1_SHIFT 9 -#define OMAP4430_OPTFCLKEN_FCLK1_MASK BITFIELD(9, 9) +#define OMAP4430_OPTFCLKEN_FCLK1_MASK (1 << 9) /* Used by CM1_ABE_SLIMBUS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_FCLK2_SHIFT 10 -#define OMAP4430_OPTFCLKEN_FCLK2_MASK BITFIELD(10, 10) +#define OMAP4430_OPTFCLKEN_FCLK2_MASK (1 << 10) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT 15 -#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK BITFIELD(15, 15) +#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK (1 << 15) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT 13 -#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK BITFIELD(13, 13) +#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK (1 << 13) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT 14 -#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK BITFIELD(14, 14) +#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK (1 << 14) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT 11 -#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK BITFIELD(11, 11) +#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK (1 << 11) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT 12 -#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK BITFIELD(12, 12) +#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK (1 << 12) /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT 8 -#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK (1 << 8) /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT 9 -#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK BITFIELD(9, 9) +#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK (1 << 9) /* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */ #define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT 8 -#define OMAP4430_OPTFCLKEN_PHY_48M_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_PHY_48M_MASK (1 << 8) /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT 10 -#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK BITFIELD(10, 10) +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK (1 << 10) /* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT 11 -#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK BITFIELD(11, 11) +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK (1 << 11) /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT 10 -#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK BITFIELD(10, 10) +#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK (1 << 10) /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT 11 -#define OMAP4430_OPTFCLKEN_TV_CLK_MASK BITFIELD(11, 11) +#define OMAP4430_OPTFCLKEN_TV_CLK_MASK (1 << 11) /* Used by CM_L3INIT_UNIPRO1_CLKCTRL */ #define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT 8 -#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK (1 << 8) /* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT 8 -#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK (1 << 8) /* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT 9 -#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK BITFIELD(9, 9) +#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK (1 << 9) /* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT 10 -#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK BITFIELD(10, 10) +#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK (1 << 10) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT 8 -#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK (1 << 8) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT 9 -#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK BITFIELD(9, 9) +#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK (1 << 9) /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT 10 -#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK BITFIELD(10, 10) +#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK (1 << 10) /* Used by CM_L3INIT_USB_OTG_CLKCTRL */ #define OMAP4430_OPTFCLKEN_XCLK_SHIFT 8 -#define OMAP4430_OPTFCLKEN_XCLK_MASK BITFIELD(8, 8) +#define OMAP4430_OPTFCLKEN_XCLK_MASK (1 << 8) -/* Used by CM_EMU_OVERRIDE_DPLL_PER, CM_EMU_OVERRIDE_DPLL_CORE */ +/* Used by CM_EMU_OVERRIDE_DPLL_CORE */ #define OMAP4430_OVERRIDE_ENABLE_SHIFT 19 -#define OMAP4430_OVERRIDE_ENABLE_MASK BITFIELD(19, 19) +#define OMAP4430_OVERRIDE_ENABLE_MASK (1 << 19) /* Used by CM_CLKSEL_ABE */ #define OMAP4430_PAD_CLKS_GATE_SHIFT 8 -#define OMAP4430_PAD_CLKS_GATE_MASK BITFIELD(8, 8) +#define OMAP4430_PAD_CLKS_GATE_MASK (1 << 8) /* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */ #define OMAP4430_PERF_CURRENT_SHIFT 0 -#define OMAP4430_PERF_CURRENT_MASK BITFIELD(0, 7) +#define OMAP4430_PERF_CURRENT_MASK (0xff << 0) /* * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3, @@ -1316,159 +1355,173 @@ * CM_IVA_DVFS_PERF_TESLA */ #define OMAP4430_PERF_REQ_SHIFT 0 -#define OMAP4430_PERF_REQ_MASK BITFIELD(0, 7) - -/* Used by CM_EMU_OVERRIDE_DPLL_PER */ -#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT 0 -#define OMAP4430_PER_DPLL_EMU_DIV_MASK BITFIELD(0, 6) - -/* Used by CM_EMU_OVERRIDE_DPLL_PER */ -#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT 8 -#define OMAP4430_PER_DPLL_EMU_MULT_MASK BITFIELD(8, 18) +#define OMAP4430_PERF_REQ_MASK (0xff << 0) /* Used by CM_RESTORE_ST */ #define OMAP4430_PHASE1_COMPLETED_SHIFT 0 -#define OMAP4430_PHASE1_COMPLETED_MASK BITFIELD(0, 0) +#define OMAP4430_PHASE1_COMPLETED_MASK (1 << 0) /* Used by CM_RESTORE_ST */ #define OMAP4430_PHASE2A_COMPLETED_SHIFT 1 -#define OMAP4430_PHASE2A_COMPLETED_MASK BITFIELD(1, 1) +#define OMAP4430_PHASE2A_COMPLETED_MASK (1 << 1) /* Used by CM_RESTORE_ST */ #define OMAP4430_PHASE2B_COMPLETED_SHIFT 2 -#define OMAP4430_PHASE2B_COMPLETED_MASK BITFIELD(2, 2) +#define OMAP4430_PHASE2B_COMPLETED_MASK (1 << 2) /* Used by CM_EMU_DEBUGSS_CLKCTRL */ #define OMAP4430_PMD_STM_MUX_CTRL_SHIFT 20 -#define OMAP4430_PMD_STM_MUX_CTRL_MASK BITFIELD(20, 21) +#define OMAP4430_PMD_STM_MUX_CTRL_MASK (0x3 << 20) /* Used by CM_EMU_DEBUGSS_CLKCTRL */ #define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT 22 -#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK BITFIELD(22, 23) +#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK (0x3 << 22) -/* Used by CM_DYN_DEP_PRESCAL */ +/* Used by CM_DYN_DEP_PRESCAL, CM_DYN_DEP_PRESCAL_RESTORE */ #define OMAP4430_PRESCAL_SHIFT 0 -#define OMAP4430_PRESCAL_MASK BITFIELD(0, 5) +#define OMAP4430_PRESCAL_MASK (0x3f << 0) -/* Used by REVISION_CM2, REVISION_CM1 */ -#define OMAP4430_REV_SHIFT 0 -#define OMAP4430_REV_MASK BITFIELD(0, 7) +/* Used by REVISION_CM1, REVISION_CM2 */ +#define OMAP4430_R_RTL_SHIFT 11 +#define OMAP4430_R_RTL_MASK (0x1f << 11) /* - * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, - * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE + * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, + * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ #define OMAP4430_SAR_MODE_SHIFT 4 -#define OMAP4430_SAR_MODE_MASK BITFIELD(4, 4) +#define OMAP4430_SAR_MODE_MASK (1 << 4) /* Used by CM_SCALE_FCLK */ #define OMAP4430_SCALE_FCLK_SHIFT 0 -#define OMAP4430_SCALE_FCLK_MASK BITFIELD(0, 0) +#define OMAP4430_SCALE_FCLK_MASK (1 << 0) + +/* Used by REVISION_CM1, REVISION_CM2 */ +#define OMAP4430_SCHEME_SHIFT 30 +#define OMAP4430_SCHEME_MASK (0x3 << 30) -/* Used by CM_L4CFG_DYNAMICDEP */ +/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ #define OMAP4430_SDMA_DYNDEP_SHIFT 11 -#define OMAP4430_SDMA_DYNDEP_MASK BITFIELD(11, 11) +#define OMAP4430_SDMA_DYNDEP_MASK (1 << 11) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ #define OMAP4430_SDMA_STATDEP_SHIFT 11 -#define OMAP4430_SDMA_STATDEP_MASK BITFIELD(11, 11) +#define OMAP4430_SDMA_STATDEP_MASK (1 << 11) /* Used by CM_CLKSEL_ABE */ #define OMAP4430_SLIMBUS_CLK_GATE_SHIFT 10 -#define OMAP4430_SLIMBUS_CLK_GATE_MASK BITFIELD(10, 10) +#define OMAP4430_SLIMBUS_CLK_GATE_MASK (1 << 10) /* - * Used by CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, - * CM_DUCATI_DUCATI_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, - * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * Used by CM1_ABE_AESS_CLKCTRL, CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, + * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, + * CM_DUCATI_DUCATI_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_IVAHD_IVAHD_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, - * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL, - * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, - * CM_CAM_ISS_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, - * CM_IVAHD_IVAHD_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, - * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL + * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, + * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, + * CM_L3INIT_XHPI_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL, + * CM_SDMA_SDMA_CLKCTRL, CM_TESLA_TESLA_CLKCTRL */ #define OMAP4430_STBYST_SHIFT 18 -#define OMAP4430_STBYST_MASK BITFIELD(18, 18) +#define OMAP4430_STBYST_MASK (1 << 18) /* - * Used by CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB, - * CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY, - * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU + * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY, + * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, + * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB */ #define OMAP4430_ST_DPLL_CLK_SHIFT 0 -#define OMAP4430_ST_DPLL_CLK_MASK BITFIELD(0, 0) +#define OMAP4430_ST_DPLL_CLK_MASK (1 << 0) /* Used by CM_CLKDCOLDO_DPLL_USB */ #define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT 9 -#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK BITFIELD(9, 9) +#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK (1 << 9) /* - * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE, - * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, - * CM_DIV_M2_DPLL_MPU + * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU, + * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB */ #define OMAP4430_ST_DPLL_CLKOUT_SHIFT 9 -#define OMAP4430_ST_DPLL_CLKOUT_MASK BITFIELD(9, 9) +#define OMAP4430_ST_DPLL_CLKOUT_MASK (1 << 9) /* - * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, - * CM_DIV_M3_DPLL_CORE + * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, + * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT 9 -#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK BITFIELD(9, 9) +#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK (1 << 9) -/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */ +/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT 11 -#define OMAP4430_ST_DPLL_CLKOUTX2_MASK BITFIELD(11, 11) +#define OMAP4430_ST_DPLL_CLKOUTX2_MASK (1 << 11) /* - * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT 9 -#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK BITFIELD(9, 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9) /* - * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT 9 -#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK BITFIELD(9, 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9) /* - * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT 9 -#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK BITFIELD(9, 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9) /* - * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_CORE + * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT 9 -#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK BITFIELD(9, 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK (1 << 9) + +/* + * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY, + * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, + * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB + */ +#define OMAP4430_ST_MN_BYPASS_SHIFT 8 +#define OMAP4430_ST_MN_BYPASS_MASK (1 << 8) /* Used by CM_SYS_CLKSEL */ #define OMAP4430_SYS_CLKSEL_SHIFT 0 -#define OMAP4430_SYS_CLKSEL_MASK BITFIELD(0, 2) +#define OMAP4430_SYS_CLKSEL_MASK (0x7 << 0) -/* Used by CM_L4CFG_DYNAMICDEP */ +/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ #define OMAP4430_TESLA_DYNDEP_SHIFT 1 -#define OMAP4430_TESLA_DYNDEP_MASK BITFIELD(1, 1) +#define OMAP4430_TESLA_DYNDEP_MASK (1 << 1) /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ #define OMAP4430_TESLA_STATDEP_SHIFT 1 -#define OMAP4430_TESLA_STATDEP_MASK BITFIELD(1, 1) +#define OMAP4430_TESLA_STATDEP_MASK (1 << 1) /* - * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, - * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, - * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + * Used by CM_D2D_DYNAMICDEP, CM_D2D_DYNAMICDEP_RESTORE, CM_DUCATI_DYNAMICDEP, + * CM_EMU_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE, + * CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, + * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, + * CM_L4PER_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_WINDOWSIZE_SHIFT 24 -#define OMAP4430_WINDOWSIZE_MASK BITFIELD(24, 27) +#define OMAP4430_WINDOWSIZE_MASK (0xf << 24) + +/* Used by REVISION_CM1, REVISION_CM2 */ +#define OMAP4430_X_MAJOR_SHIFT 8 +#define OMAP4430_X_MAJOR_MASK (0x7 << 8) + +/* Used by REVISION_CM1, REVISION_CM2 */ +#define OMAP4430_Y_MINOR_SHIFT 0 +#define OMAP4430_Y_MINOR_MASK (0x3f << 0) #endif diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h index 336d94889e5b..3c35a87cb90c 100644 --- a/arch/arm/mach-omap2/cm44xx.h +++ b/arch/arm/mach-omap2/cm44xx.h @@ -195,6 +195,42 @@ #define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET 0x0088 #define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088) +/* CM1.RESTORE_CM1 register offsets */ +#define OMAP4_CM_CLKSEL_CORE_RESTORE_OFFSET 0x0000 +#define OMAP4430_CM_CLKSEL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000) +#define OMAP4_CM_DIV_M2_DPLL_CORE_RESTORE_OFFSET 0x0004 +#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004) +#define OMAP4_CM_DIV_M3_DPLL_CORE_RESTORE_OFFSET 0x0008 +#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008) +#define OMAP4_CM_DIV_M4_DPLL_CORE_RESTORE_OFFSET 0x000c +#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c) +#define OMAP4_CM_DIV_M5_DPLL_CORE_RESTORE_OFFSET 0x0010 +#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010) +#define OMAP4_CM_DIV_M6_DPLL_CORE_RESTORE_OFFSET 0x0014 +#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014) +#define OMAP4_CM_DIV_M7_DPLL_CORE_RESTORE_OFFSET 0x0018 +#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018) +#define OMAP4_CM_CLKSEL_DPLL_CORE_RESTORE_OFFSET 0x001c +#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c) +#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE_OFFSET 0x0020 +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE_OFFSET 0x0024 +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024) +#define OMAP4_CM_CLKMODE_DPLL_CORE_RESTORE_OFFSET 0x0028 +#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028) +#define OMAP4_CM_SHADOW_FREQ_CONFIG2_RESTORE_OFFSET 0x002c +#define OMAP4430_CM_SHADOW_FREQ_CONFIG2_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c) +#define OMAP4_CM_SHADOW_FREQ_CONFIG1_RESTORE_OFFSET 0x0030 +#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030) +#define OMAP4_CM_AUTOIDLE_DPLL_CORE_RESTORE_OFFSET 0x0034 +#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034) +#define OMAP4_CM_MPU_CLKSTCTRL_RESTORE_OFFSET 0x0038 +#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0038) +#define OMAP4_CM_CM1_PROFILING_CLKCTRL_RESTORE_OFFSET 0x003c +#define OMAP4430_CM_CM1_PROFILING_CLKCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x003c) +#define OMAP4_CM_DYN_DEP_PRESCAL_RESTORE_OFFSET 0x0040 +#define OMAP4430_CM_DYN_DEP_PRESCAL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0040) + /* CM2 */ /* CM2.OCP_SOCKET_CM2 register offsets */ @@ -252,8 +288,6 @@ #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068) #define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x006c #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c) -#define OMAP4_CM_EMU_OVERRIDE_DPLL_PER_OFFSET 0x0070 -#define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070) #define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET 0x0080 #define OMAP4430_CM_CLKMODE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080) #define OMAP4_CM_IDLEST_DPLL_USB_OFFSET 0x0084 @@ -296,6 +330,8 @@ #define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030) #define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET 0x0038 #define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038) +#define OMAP4_CM_ALWON_USBPHY_CLKCTRL_OFFSET 0x0040 +#define OMAP4430_CM_ALWON_USBPHY_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0040) /* CM2.CORE_CM2 register offsets */ #define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET 0x0000 @@ -578,4 +614,54 @@ #define OMAP4430_CM_CEFUSE_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000) #define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020) + +/* CM2.RESTORE_CM2 register offsets */ +#define OMAP4_CM_L3_1_CLKSTCTRL_RESTORE_OFFSET 0x0000 +#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000) +#define OMAP4_CM_L3_2_CLKSTCTRL_RESTORE_OFFSET 0x0004 +#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004) +#define OMAP4_CM_L4CFG_CLKSTCTRL_RESTORE_OFFSET 0x0008 +#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008) +#define OMAP4_CM_MEMIF_CLKSTCTRL_RESTORE_OFFSET 0x000c +#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c) +#define OMAP4_CM_L4PER_CLKSTCTRL_RESTORE_OFFSET 0x0010 +#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010) +#define OMAP4_CM_L3INIT_CLKSTCTRL_RESTORE_OFFSET 0x0014 +#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014) +#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_RESTORE_OFFSET 0x0018 +#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018) +#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE_OFFSET 0x001c +#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c) +#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE_OFFSET 0x0020 +#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020) +#define OMAP4_CM_CM2_PROFILING_CLKCTRL_RESTORE_OFFSET 0x0024 +#define OMAP4430_CM_CM2_PROFILING_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024) +#define OMAP4_CM_D2D_STATICDEP_RESTORE_OFFSET 0x0028 +#define OMAP4430_CM_D2D_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028) +#define OMAP4_CM_L3_1_DYNAMICDEP_RESTORE_OFFSET 0x002c +#define OMAP4430_CM_L3_1_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c) +#define OMAP4_CM_L3_2_DYNAMICDEP_RESTORE_OFFSET 0x0030 +#define OMAP4430_CM_L3_2_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030) +#define OMAP4_CM_D2D_DYNAMICDEP_RESTORE_OFFSET 0x0034 +#define OMAP4430_CM_D2D_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034) +#define OMAP4_CM_L4CFG_DYNAMICDEP_RESTORE_OFFSET 0x0038 +#define OMAP4430_CM_L4CFG_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038) +#define OMAP4_CM_L4PER_DYNAMICDEP_RESTORE_OFFSET 0x003c +#define OMAP4430_CM_L4PER_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c) +#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_RESTORE_OFFSET 0x0040 +#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040) +#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_RESTORE_OFFSET 0x0044 +#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0044) +#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_RESTORE_OFFSET 0x0048 +#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0048) +#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_RESTORE_OFFSET 0x004c +#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x004c) +#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_RESTORE_OFFSET 0x0050 +#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0050) +#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE_OFFSET 0x0054 +#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0054) +#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE_OFFSET 0x0058 +#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0058) +#define OMAP4_CM_SDMA_STATICDEP_RESTORE_OFFSET 0x005c +#define OMAP4430_CM_SDMA_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x005c) #endif diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c index b101091e95d6..f8a660a1a4a6 100644 --- a/arch/arm/mach-omap2/cm4xxx.c +++ b/arch/arm/mach-omap2/cm4xxx.c @@ -43,7 +43,6 @@ * using separate functional clock * 0x3 disabled: Module is disabled and cannot be accessed * - * TODO: Need to handle module accessible in idle state */ int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg) { @@ -52,9 +51,11 @@ int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg) if (!clkctrl_reg) return 0; - omap_test_timeout(((__raw_readl(clkctrl_reg) & - OMAP4430_IDLEST_MASK) == 0), - MAX_MODULE_READY_TIME, i); + omap_test_timeout(( + ((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) == 0) || + (((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) >> + OMAP4430_IDLEST_SHIFT) == 0x2)), + MAX_MODULE_READY_TIME, i); return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c new file mode 100644 index 000000000000..778929f7e92d --- /dev/null +++ b/arch/arm/mach-omap2/common.c @@ -0,0 +1,135 @@ +/* + * linux/arch/arm/mach-omap2/common.c + * + * Code common to all OMAP2+ machines. + * + * Copyright (C) 2009 Texas Instruments + * Copyright (C) 2010 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <plat/common.h> +#include <plat/board.h> +#include <plat/mux.h> + +#include <plat/clock.h> + +#include "sdrc.h" +#include "control.h" + +/* Global address base setup code */ + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + +static void __init __omap2_set_globals(struct omap_globals *omap2_globals) +{ + omap2_set_globals_tap(omap2_globals); + omap2_set_globals_sdrc(omap2_globals); + omap2_set_globals_control(omap2_globals); + omap2_set_globals_prcm(omap2_globals); +} + +#endif + +#if defined(CONFIG_ARCH_OMAP2420) + +static struct omap_globals omap242x_globals = { + .class = OMAP242X_CLASS, + .tap = OMAP2_L4_IO_ADDRESS(0x48014000), + .sdrc = OMAP2420_SDRC_BASE, + .sms = OMAP2420_SMS_BASE, + .ctrl = OMAP242X_CTRL_BASE, + .prm = OMAP2420_PRM_BASE, + .cm = OMAP2420_CM_BASE, + .uart1_phys = OMAP2_UART1_BASE, + .uart2_phys = OMAP2_UART2_BASE, + .uart3_phys = OMAP2_UART3_BASE, +}; + +void __init omap2_set_globals_242x(void) +{ + __omap2_set_globals(&omap242x_globals); +} +#endif + +#if defined(CONFIG_ARCH_OMAP2430) + +static struct omap_globals omap243x_globals = { + .class = OMAP243X_CLASS, + .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), + .sdrc = OMAP243X_SDRC_BASE, + .sms = OMAP243X_SMS_BASE, + .ctrl = OMAP243X_CTRL_BASE, + .prm = OMAP2430_PRM_BASE, + .cm = OMAP2430_CM_BASE, + .uart1_phys = OMAP2_UART1_BASE, + .uart2_phys = OMAP2_UART2_BASE, + .uart3_phys = OMAP2_UART3_BASE, +}; + +void __init omap2_set_globals_243x(void) +{ + __omap2_set_globals(&omap243x_globals); +} +#endif + +#if defined(CONFIG_ARCH_OMAP3) + +static struct omap_globals omap3_globals = { + .class = OMAP343X_CLASS, + .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), + .sdrc = OMAP343X_SDRC_BASE, + .sms = OMAP343X_SMS_BASE, + .ctrl = OMAP343X_CTRL_BASE, + .prm = OMAP3430_PRM_BASE, + .cm = OMAP3430_CM_BASE, + .uart1_phys = OMAP3_UART1_BASE, + .uart2_phys = OMAP3_UART2_BASE, + .uart3_phys = OMAP3_UART3_BASE, + .uart4_phys = OMAP3_UART4_BASE, /* Only on 3630 */ +}; + +void __init omap2_set_globals_3xxx(void) +{ + __omap2_set_globals(&omap3_globals); +} + +void __init omap3_map_io(void) +{ + omap2_set_globals_3xxx(); + omap34xx_map_common_io(); +} +#endif + +#if defined(CONFIG_ARCH_OMAP4) +static struct omap_globals omap4_globals = { + .class = OMAP443X_CLASS, + .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), + .ctrl = OMAP443X_SCM_BASE, + .ctrl_pad = OMAP443X_CTRL_BASE, + .prm = OMAP4430_PRM_BASE, + .cm = OMAP4430_CM_BASE, + .cm2 = OMAP4430_CM2_BASE, + .uart1_phys = OMAP4_UART1_BASE, + .uart2_phys = OMAP4_UART2_BASE, + .uart3_phys = OMAP4_UART3_BASE, + .uart4_phys = OMAP4_UART4_BASE, +}; + +void __init omap2_set_globals_443x(void) +{ + omap2_set_globals_tap(&omap4_globals); + omap2_set_globals_control(&omap4_globals); + omap2_set_globals_prcm(&omap4_globals); +} +#endif + diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index a8d20eef2306..1fa3294b6048 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -16,15 +16,18 @@ #include <linux/io.h> #include <plat/common.h> -#include <plat/control.h> #include <plat/sdrc.h> + #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" #include "cm.h" #include "prm.h" #include "sdrc.h" +#include "pm.h" +#include "control.h" static void __iomem *omap2_ctrl_base; +static void __iomem *omap4_ctrl_pad_base; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) struct omap3_scratchpad { @@ -137,6 +140,7 @@ static struct omap3_control_regs control_context; #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ #define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg)) +#define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg)) void __init omap2_set_globals_control(struct omap_globals *omap2_globals) { @@ -145,6 +149,12 @@ void __init omap2_set_globals_control(struct omap_globals *omap2_globals) omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K); WARN_ON(!omap2_ctrl_base); } + + /* Static mapping, never released */ + if (omap2_globals->ctrl_pad) { + omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K); + WARN_ON(!omap4_ctrl_pad_base); + } } void __iomem *omap_ctrl_base_get(void) @@ -182,6 +192,23 @@ void omap_ctrl_writel(u32 val, u16 offset) __raw_writel(val, OMAP_CTRL_REGADDR(offset)); } +/* + * On OMAP4 control pad are not addressable from control + * core base. So the common omap_ctrl_read/write APIs breaks + * Hence export separate APIs to manage the omap4 pad control + * registers. This APIs will work only for OMAP4 + */ + +u32 omap4_ctrl_pad_readl(u16 offset) +{ + return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset)); +} + +void omap4_ctrl_pad_writel(u32 val, u16 offset) +{ + __raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset)); +} + #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) /* * Clears the scratchpad contents in case of cold boot- @@ -190,7 +217,7 @@ void omap_ctrl_writel(u32 val, u16 offset) void omap3_clear_scratchpad_contents(void) { u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET; - u32 *v_addr; + void __iomem *v_addr; u32 offset = 0; v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM); if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & @@ -206,7 +233,7 @@ void omap3_clear_scratchpad_contents(void) /* Populate the scratchpad structure with restore structure */ void omap3_save_scratchpad_contents(void) { - void * __iomem scratchpad_address; + void __iomem *scratchpad_address; u32 arm_context_addr; struct omap3_scratchpad scratchpad_contents; struct omap3_scratchpad_prcm_block prcm_block_contents; diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/mach-omap2/control.h index 131bf405c2f6..b6c6b7c450b3 100644 --- a/arch/arm/plat-omap/include/plat/control.h +++ b/arch/arm/mach-omap2/control.h @@ -1,10 +1,10 @@ /* - * arch/arm/plat-omap/include/mach/control.h + * arch/arm/mach-omap2/control.h * * OMAP2/3/4 System Control Module definitions * - * Copyright (C) 2007-2009 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2010 Texas Instruments, Inc. + * Copyright (C) 2007-2008, 2010 Nokia Corporation * * Written by Paul Walmsley * @@ -13,10 +13,14 @@ * the Free Software Foundation. */ -#ifndef __ASM_ARCH_CONTROL_H -#define __ASM_ARCH_CONTROL_H +#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H +#define __ARCH_ARM_MACH_OMAP2_CONTROL_H #include <mach/io.h> +#include <mach/ctrl_module_core_44xx.h> +#include <mach/ctrl_module_wkup_44xx.h> +#include <mach/ctrl_module_pad_core_44xx.h> +#include <mach/ctrl_module_pad_wkup_44xx.h> #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ @@ -204,12 +208,6 @@ #define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 #define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 -/* 44xx control status register offset */ -#define OMAP44XX_CONTROL_STATUS 0x2c4 - -/* 44xx-only CONTROL_GENERAL register offsets */ -#define OMAP44XX_CONTROL_MMC1 0x628 -#define OMAP44XX_CONTROL_PBIAS_LITE 0x600 /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. @@ -225,6 +223,8 @@ #define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */ #define OMAP24XX_USBSTANDBYCTRL (1 << 15) #define OMAP2_MCBSP2_CLKS_MASK (1 << 6) +#define OMAP2_MCBSP1_FSR_MASK (1 << 4) +#define OMAP2_MCBSP1_CLKR_MASK (1 << 3) #define OMAP2_MCBSP1_CLKS_MASK (1 << 2) /* CONTROL_DEVCONF1 bits */ @@ -255,23 +255,6 @@ #define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) #define OMAP2_PBIASLITEVMODE0 (1 << 0) -/* CONTROL_PBIAS_LITE bits for OMAP4 */ -#define OMAP4_MMC1_PWRDNZ (1 << 26) -#define OMAP4_MMC1_PBIASLITE_HIZ_MODE (1 << 25) -#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT (1 << 24) -#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR (1 << 23) -#define OMAP4_MMC1_PBIASLITE_PWRDNZ (1 << 22) -#define OMAP4_MMC1_PBIASLITE_VMODE (1 << 21) -#define OMAP4_USBC1_ICUSB_PWRDNZ (1 << 20) - -#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 (1 << 31) -#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1 (1 << 30) -#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 (1 << 29) -#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3 (1 << 28) -#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL (1 << 27) -#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL (1 << 26) -#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL (1 << 25) - /* CONTROL_PROG_IO1 bits */ #define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20) @@ -338,12 +321,12 @@ #define FEAT_L2CACHE_256KB 3 #define OMAP3_ISP_SHIFT 5 -#define OMAP3_ISP_MASK (1<< OMAP3_ISP_SHIFT) +#define OMAP3_ISP_MASK (1 << OMAP3_ISP_SHIFT) #define FEAT_ISP 0 #define FEAT_ISP_NONE 1 #define OMAP3_NEON_SHIFT 4 -#define OMAP3_NEON_MASK (1<< OMAP3_NEON_SHIFT) +#define OMAP3_NEON_MASK (1 << OMAP3_NEON_SHIFT) #define FEAT_NEON 0 #define FEAT_NEON_NONE 1 @@ -354,9 +337,11 @@ extern void __iomem *omap_ctrl_base_get(void); extern u8 omap_ctrl_readb(u16 offset); extern u16 omap_ctrl_readw(u16 offset); extern u32 omap_ctrl_readl(u16 offset); +extern u32 omap4_ctrl_pad_readl(u16 offset); extern void omap_ctrl_writeb(u8 val, u16 offset); extern void omap_ctrl_writew(u16 val, u16 offset); extern void omap_ctrl_writel(u32 val, u16 offset); +extern void omap4_ctrl_pad_writel(u32 val, u16 offset); extern void omap3_save_scratchpad_contents(void); extern void omap3_clear_scratchpad_contents(void); @@ -371,11 +356,13 @@ extern void omap3_control_restore_context(void); #define omap_ctrl_readb(x) 0 #define omap_ctrl_readw(x) 0 #define omap_ctrl_readl(x) 0 +#define omap4_ctrl_pad_readl(x) 0 #define omap_ctrl_writeb(x, y) WARN_ON(1) #define omap_ctrl_writew(x, y) WARN_ON(1) #define omap_ctrl_writel(x, y) WARN_ON(1) +#define omap4_ctrl_pad_writel(x, y) WARN_ON(1) #endif #endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_CONTROL_H */ +#endif /* __ARCH_ARM_MACH_OMAP2_CONTROL_H */ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 3d3d035db9af..0d50b45d041c 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -29,10 +29,10 @@ #include <plat/irqs.h> #include <plat/powerdomain.h> #include <plat/clockdomain.h> -#include <plat/control.h> #include <plat/serial.h> #include "pm.h" +#include "control.h" #ifdef CONFIG_CPU_IDLE @@ -60,7 +60,8 @@ struct omap3_processor_cx { struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; struct omap3_processor_cx current_cx_state; -struct powerdomain *mpu_pd, *core_pd; +struct powerdomain *mpu_pd, *core_pd, *per_pd; +struct powerdomain *cam_pd; /* * The latencies/thresholds for various C states have @@ -233,14 +234,60 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *state) { struct cpuidle_state *new_state = next_valid_state(dev, state); + u32 core_next_state, per_next_state = 0, per_saved_state = 0; + u32 cam_state; + struct omap3_processor_cx *cx; + int ret; if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { BUG_ON(!dev->safe_state); new_state = dev->safe_state; + goto select_state; } + cx = cpuidle_get_statedata(state); + core_next_state = cx->core_state; + + /* + * FIXME: we currently manage device-specific idle states + * for PER and CORE in combination with CPU-specific + * idle states. This is wrong, and device-specific + * idle managment needs to be separated out into + * its own code. + */ + + /* + * Prevent idle completely if CAM is active. + * CAM does not have wakeup capability in OMAP3. + */ + cam_state = pwrdm_read_pwrst(cam_pd); + if (cam_state == PWRDM_POWER_ON) { + new_state = dev->safe_state; + goto select_state; + } + + /* + * Prevent PER off if CORE is not in retention or off as this + * would disable PER wakeups completely. + */ + per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); + if ((per_next_state == PWRDM_POWER_OFF) && + (core_next_state > PWRDM_POWER_RET)) + per_next_state = PWRDM_POWER_RET; + + /* Are we changing PER target state? */ + if (per_next_state != per_saved_state) + pwrdm_set_next_pwrst(per_pd, per_next_state); + +select_state: dev->last_state = new_state; - return omap3_enter_idle(dev, new_state); + ret = omap3_enter_idle(dev, new_state); + + /* Restore original PER state if it was modified */ + if (per_next_state != per_saved_state) + pwrdm_set_next_pwrst(per_pd, per_saved_state); + + return ret; } DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); @@ -328,7 +375,8 @@ void omap_init_power_states(void) cpuidle_params_table[OMAP3_STATE_C2].threshold; omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID; + omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_CHECK_BM; /* C3 . MPU CSWR + Core inactive */ omap3_power_states[OMAP3_STATE_C3].valid = @@ -426,6 +474,8 @@ int __init omap3_idle_init(void) mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); + per_pd = pwrdm_lookup("per_pwrdm"); + cam_pd = pwrdm_lookup("cam_pwrdm"); omap_init_power_states(); cpuidle_register_driver(&omap3_idle_driver); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2dbb265bedd4..eaf37994403b 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -9,12 +9,12 @@ * (at your option) any later version. */ -#include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/err.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -22,14 +22,16 @@ #include <asm/mach/map.h> #include <asm/pmu.h> -#include <plat/control.h> #include <plat/tc.h> #include <plat/board.h> #include <mach/gpio.h> #include <plat/mmc.h> #include <plat/dma.h> +#include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include "mux.h" +#include "control.h" #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -498,6 +500,76 @@ static void omap_init_sham(void) static inline void omap_init_sham(void) { } #endif +#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE) + +#ifdef CONFIG_ARCH_OMAP2 +static struct resource omap2_aes_resources[] = { + { + .start = OMAP24XX_SEC_AES_BASE, + .end = OMAP24XX_SEC_AES_BASE + 0x4C, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP24XX_DMA_AES_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = OMAP24XX_DMA_AES_RX, + .flags = IORESOURCE_DMA, + } +}; +static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources); +#else +#define omap2_aes_resources NULL +#define omap2_aes_resources_sz 0 +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct resource omap3_aes_resources[] = { + { + .start = OMAP34XX_SEC_AES_BASE, + .end = OMAP34XX_SEC_AES_BASE + 0x4C, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP34XX_DMA_AES2_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = OMAP34XX_DMA_AES2_RX, + .flags = IORESOURCE_DMA, + } +}; +static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources); +#else +#define omap3_aes_resources NULL +#define omap3_aes_resources_sz 0 +#endif + +static struct platform_device aes_device = { + .name = "omap-aes", + .id = -1, +}; + +static void omap_init_aes(void) +{ + if (cpu_is_omap24xx()) { + aes_device.resource = omap2_aes_resources; + aes_device.num_resources = omap2_aes_resources_sz; + } else if (cpu_is_omap34xx()) { + aes_device.resource = omap3_aes_resources; + aes_device.num_resources = omap3_aes_resources_sz; + } else { + pr_err("%s: platform not supported\n", __func__); + return; + } + platform_device_register(&aes_device); +} + +#else +static inline void omap_init_aes(void) { } +#endif + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) @@ -624,7 +696,7 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc_dat0", 0); omap_mux_init_signal("sdmmc_dat_dir0", 0); omap_mux_init_signal("sdmmc_cmd_dir", 0); - if (mmc_controller->slots[0].wires == 4) { + if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) { omap_mux_init_signal("sdmmc_dat1", 0); omap_mux_init_signal("sdmmc_dat2", 0); omap_mux_init_signal("sdmmc_dat3", 0); @@ -652,8 +724,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat0", OMAP_PIN_INPUT_PULLUP); - if (mmc_controller->slots[0].wires == 4 || - mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc1_dat1", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat2", @@ -661,7 +733,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc1_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc1_dat4", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat5", @@ -685,8 +758,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed * in the board-*.c files */ - if (mmc_controller->slots[0].wires == 4 || - mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc2_dat1", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc2_dat2", @@ -694,7 +767,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc2_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].wires == 8) { + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", @@ -745,13 +819,13 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, case 3: if (!cpu_is_omap44xx()) return; - base = OMAP4_MMC4_BASE + OMAP4_MMC_REG_OFFSET; + base = OMAP4_MMC4_BASE; irq = OMAP44XX_IRQ_MMC4; break; case 4: if (!cpu_is_omap44xx()) return; - base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET; + base = OMAP4_MMC5_BASE; irq = OMAP44XX_IRQ_MMC5; break; default: @@ -762,10 +836,8 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, size = OMAP2420_MMC_SIZE; name = "mmci-omap"; } else if (cpu_is_omap44xx()) { - if (i < 3) { - base += OMAP4_MMC_REG_OFFSET; + if (i < 3) irq += OMAP44XX_IRQ_GIC_START; - } size = OMAP4_HSMMC_SIZE; name = "mmci-omap-hs"; } else { @@ -841,11 +913,72 @@ static inline void omap_init_vout(void) {} /*-------------------------------------------------------------------------*/ +/* + * Inorder to avoid any assumptions from bootloader regarding WDT + * settings, WDT module is reset during init. This enables the watchdog + * timer. Hence it is required to disable the watchdog after the WDT reset + * during init. Otherwise the system would reboot as per the default + * watchdog timer registers settings. + */ +#define OMAP_WDT_WPS (0x34) +#define OMAP_WDT_SPR (0x48) + +static int omap2_disable_wdt(struct omap_hwmod *oh, void *unused) +{ + void __iomem *base; + int ret; + + if (!oh) { + pr_err("%s: Could not look up wdtimer_hwmod\n", __func__); + return -EINVAL; + } + + base = omap_hwmod_get_mpu_rt_va(oh); + if (!base) { + pr_err("%s: Could not get the base address for %s\n", + oh->name, __func__); + return -EINVAL; + } + + /* Enable the clocks before accessing the WDT registers */ + ret = omap_hwmod_enable(oh); + if (ret) { + pr_err("%s: Could not enable clocks for %s\n", + oh->name, __func__); + return ret; + } + + /* sequence required to disable watchdog */ + __raw_writel(0xAAAA, base + OMAP_WDT_SPR); + while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + cpu_relax(); + + __raw_writel(0x5555, base + OMAP_WDT_SPR); + while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + cpu_relax(); + + ret = omap_hwmod_idle(oh); + if (ret) + pr_err("%s: Could not disable clocks for %s\n", + oh->name, __func__); + + return ret; +} + +static void __init omap_disable_wdt(void) +{ + if (cpu_class_is_omap2()) + omap_hwmod_for_each_by_class("wd_timer", + omap2_disable_wdt, NULL); + return; +} + static int __init omap2_init_devices(void) { /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ + omap_disable_wdt(); omap_hsmmc_reset(); omap_init_camera(); omap_init_mbox(); @@ -854,8 +987,45 @@ static int __init omap2_init_devices(void) omap_hdq_init(); omap_init_sti(); omap_init_sham(); + omap_init_aes(); omap_init_vout(); return 0; } arch_initcall(omap2_init_devices); + +#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) +struct omap_device_pm_latency omap_wdt_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +static int __init omap_init_wdt(void) +{ + int id = -1; + struct omap_device *od; + struct omap_hwmod *oh; + char *oh_name = "wd_timer2"; + char *dev_name = "omap_wdt"; + + if (!cpu_class_is_omap2()) + return 0; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up wd_timer%d hwmod\n", id); + return -EINVAL; + } + + od = omap_device_build(dev_name, id, oh, NULL, 0, + omap_wdt_latency, + ARRAY_SIZE(omap_wdt_latency), 0); + WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n", + dev_name, oh->name); + return 0; +} +subsys_initcall(omap_init_wdt); +#endif diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 7bb69220adfa..128bbef71abd 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -46,7 +46,7 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wph = 30; /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg = __raw_readw(onenand_base + ONENAND_REG_SYS_CFG1); reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); @@ -86,7 +86,7 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) return err; /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg = __raw_readw(onenand_base + ONENAND_REG_SYS_CFG1); reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); @@ -98,7 +98,7 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, { u32 reg; - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); + reg = __raw_readw(onenand_base + ONENAND_REG_SYS_CFG1); reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; @@ -148,7 +148,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, err = omap2_onenand_set_async_mode(cs, onenand_base); if (err) return err; - reg = readw(onenand_base + ONENAND_REG_VERSION_ID); + reg = __raw_readw(onenand_base + ONENAND_REG_VERSION_ID); switch ((reg >> 4) & 0xf) { case 0: freq = 40; diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c new file mode 100644 index 000000000000..703f150dd01d --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -0,0 +1,113 @@ +/* + * linux/arch/arm/mach-omap2/gpmc-smsc911x.c + * + * Copyright (C) 2009 Li-Pro.Net + * Stephan Linz <linz@li-pro.net> + * + * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/smsc911x.h> + +#include <plat/board.h> +#include <plat/gpmc.h> +#include <plat/gpmc-smsc911x.h> + +static struct omap_smsc911x_platform_data *gpmc_cfg; + +static struct resource gpmc_smsc911x_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config gpmc_smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_16BIT, +}; + +static struct platform_device gpmc_smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(gpmc_smsc911x_resources), + .resource = gpmc_smsc911x_resources, + .dev = { + .platform_data = &gpmc_smsc911x_config, + }, +}; + +/* + * Initialize smsc911x device connected to the GPMC. Note that we + * assume that pin multiplexing is done in the board-*.c file, + * or in the bootloader. + */ +void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) +{ + unsigned long cs_mem_base; + int ret; + + gpmc_cfg = board_data; + + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); + return; + } + + gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0; + gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff; + + if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", + gpmc_cfg->gpio_irq); + goto free1; + } + + gpio_direction_input(gpmc_cfg->gpio_irq); + gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); + gpmc_smsc911x_resources[1].flags |= + (gpmc_cfg->flags & IRQF_TRIGGER_MASK); + + if (gpio_is_valid(gpmc_cfg->gpio_reset)) { + ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset"); + if (ret) { + printk(KERN_ERR "Failed to request GPIO%d for smsc911x reset\n", + gpmc_cfg->gpio_reset); + goto free2; + } + + gpio_direction_output(gpmc_cfg->gpio_reset, 1); + gpio_set_value(gpmc_cfg->gpio_reset, 0); + msleep(100); + gpio_set_value(gpmc_cfg->gpio_reset, 1); + } + + if (platform_device_register(&gpmc_smsc911x_device) < 0) { + printk(KERN_ERR "Unable to register smsc911x device\n"); + gpio_free(gpmc_cfg->gpio_reset); + goto free2; + } + + return; + +free2: + gpio_free(gpmc_cfg->gpio_irq); +free1: + gpmc_cs_free(gpmc_cfg->cs); + + printk(KERN_ERR "Could not initialize smsc911x\n"); +} diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index c8f647b6205e..34272e4863fd 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,11 +14,11 @@ #include <linux/string.h> #include <linux/delay.h> #include <mach/hardware.h> -#include <plat/control.h> #include <plat/mmc.h> #include <plat/omap-pm.h> #include "hsmmc.h" +#include "control.h" #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) @@ -135,10 +135,11 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, * * FIXME handle VMMC1A as needed ... */ - reg = omap_ctrl_readl(control_pbias_offset); - reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ | - OMAP4_USBC1_ICUSB_PWRDNZ); - omap_ctrl_writel(reg, control_pbias_offset); + reg = omap4_ctrl_pad_readl(control_pbias_offset); + reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | + OMAP4_MMC1_PWRDNZ_MASK | + OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + omap4_ctrl_pad_writel(reg, control_pbias_offset); } static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, @@ -147,30 +148,33 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, u32 reg; if (power_on) { - reg = omap_ctrl_readl(control_pbias_offset); - reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ; + reg = omap4_ctrl_pad_readl(control_pbias_offset); + reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK; if ((1 << vdd) <= MMC_VDD_165_195) - reg &= ~OMAP4_MMC1_PBIASLITE_VMODE; + reg &= ~OMAP4_MMC1_PBIASLITE_VMODE_MASK; else - reg |= OMAP4_MMC1_PBIASLITE_VMODE; - reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ | - OMAP4_USBC1_ICUSB_PWRDNZ); - omap_ctrl_writel(reg, control_pbias_offset); + reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; + reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | + OMAP4_MMC1_PWRDNZ_MASK | + OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + omap4_ctrl_pad_writel(reg, control_pbias_offset); /* 4 microsec delay for comparator to generate an error*/ udelay(4); - reg = omap_ctrl_readl(control_pbias_offset); - if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR) { + reg = omap4_ctrl_pad_readl(control_pbias_offset); + if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err("Pbias Voltage is not same as LDO\n"); /* Caution : On VMODE_ERROR Power Down MMC IO */ - reg &= ~(OMAP4_MMC1_PWRDNZ | OMAP4_USBC1_ICUSB_PWRDNZ); - omap_ctrl_writel(reg, control_pbias_offset); + reg &= ~(OMAP4_MMC1_PWRDNZ_MASK | + OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + omap4_ctrl_pad_writel(reg, control_pbias_offset); } } else { - reg = omap_ctrl_readl(control_pbias_offset); - reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | - OMAP4_MMC1_PBIASLITE_VMODE | OMAP4_MMC1_PWRDNZ | - OMAP4_USBC1_ICUSB_PWRDNZ); - omap_ctrl_writel(reg, control_pbias_offset); + reg = omap4_ctrl_pad_readl(control_pbias_offset); + reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | + OMAP4_MMC1_PWRDNZ_MASK | + OMAP4_MMC1_PBIASLITE_VMODE_MASK | + OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + omap4_ctrl_pad_writel(reg, control_pbias_offset); } } @@ -218,17 +222,18 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; } } else { - control_pbias_offset = OMAP44XX_CONTROL_PBIAS_LITE; - control_mmc1 = OMAP44XX_CONTROL_MMC1; - reg = omap_ctrl_readl(control_mmc1); - reg |= (OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 | - OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1); - reg &= ~(OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 | - OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3); - reg |= (OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL | - OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL | - OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL); - omap_ctrl_writel(reg, control_mmc1); + control_pbias_offset = + OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE; + control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1; + reg = omap4_ctrl_pad_readl(control_mmc1); + reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK | + OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); + reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | + OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); + reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| + OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | + OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); + omap4_ctrl_pad_writel(reg, control_mmc1); } for (c = controllers; c->mmc; c++) { @@ -258,9 +263,13 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) "mmc%islot%i", c->mmc, 1); mmc->slots[0].name = hc->name; mmc->nr_slots = 1; - mmc->slots[0].wires = c->wires; + mmc->slots[0].caps = c->caps; mmc->slots[0].internal_clock = !c->ext_clock; mmc->dma_mask = 0xffffffff; + if (cpu_is_omap44xx()) + mmc->reg_offset = OMAP4_MMC_REG_OFFSET; + else + mmc->reg_offset = 0; mmc->get_context_loss_count = hsmmc_get_context_loss; @@ -298,6 +307,9 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) else mmc->slots[0].features |= HSMMC_HAS_PBIAS; + if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) + mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; + switch (c->mmc) { case 1: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { @@ -316,16 +328,20 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) } /* Omap3630 HSMMC1 supports only 4-bit */ - if (cpu_is_omap3630() && c->wires > 4) { - c->wires = 4; - mmc->slots[0].wires = c->wires; + if (cpu_is_omap3630() && + (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + mmc->slots[0].caps = c->caps; } break; case 2: if (c->ext_clock) c->transceiver = 1; - if (c->transceiver && c->wires > 4) - c->wires = 4; + if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + } /* FALLTHROUGH */ case 3: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 1fe6f0187177..281e97287adf 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -10,7 +10,8 @@ struct mmc_card; struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ - u8 wires; /* 1/4/8 wires */ + u32 caps; /* 4/8 wires and any additional host + * capabilities OR'd (ref. linux/mmc/host.h) */ bool transceiver; /* MMC-2 option */ bool ext_clock; /* use external pin for input clock */ bool cover_only; /* No card detect - just cover switch */ diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 9a879f959509..5f9086c65e48 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -22,11 +22,12 @@ #include <asm/cputype.h> #include <plat/common.h> -#include <plat/control.h> #include <plat/cpu.h> #include <mach/id.h> +#include "control.h" + static struct omap_chip_id omap_chip; static unsigned int omap_revision; @@ -60,7 +61,7 @@ int omap_type(void) } else if (cpu_is_omap34xx()) { val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); } else if (cpu_is_omap44xx()) { - val = omap_ctrl_readl(OMAP44XX_CONTROL_STATUS); + val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS); } else { pr_err("Cannot detect omap type!\n"); goto out; @@ -298,7 +299,6 @@ static void __init omap4_check_revision(void) u32 idcode; u16 hawkeye; u8 rev; - char *rev_name = "ES1.0"; /* * The IC rev detection is done with hawkeye and rev. @@ -309,14 +309,39 @@ static void __init omap4_check_revision(void) hawkeye = (idcode >> 12) & 0xffff; rev = (idcode >> 28) & 0xff; - if ((hawkeye == 0xb852) && (rev == 0x0)) { - omap_revision = OMAP4430_REV_ES1_0; - omap_chip.oc |= CHIP_IS_OMAP4430ES1; - pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); - return; + /* + * Few initial ES2.0 samples IDCODE is same as ES1.0 + * Use ARM register to detect the correct ES version + */ + if (!rev) { + idcode = read_cpuid(CPUID_ID); + rev = (idcode & 0xf) - 1; + } + + switch (hawkeye) { + case 0xb852: + switch (rev) { + case 0: + omap_revision = OMAP4430_REV_ES1_0; + omap_chip.oc |= CHIP_IS_OMAP4430ES1; + break; + case 1: + omap_revision = OMAP4430_REV_ES2_0; + omap_chip.oc |= CHIP_IS_OMAP4430ES2; + break; + default: + omap_revision = OMAP4430_REV_ES2_0; + omap_chip.oc |= CHIP_IS_OMAP4430ES2; + } + break; + default: + /* Unknown default to latest silicon rev as default*/ + omap_revision = OMAP4430_REV_ES2_0; + omap_chip.oc |= CHIP_IS_OMAP4430ES2; } - pr_err("Unknown OMAP4 CPU id\n"); + pr_info("OMAP%04x ES%d.0\n", + omap_rev() >> 16, ((omap_rev() >> 12) & 0xf) + 1); } #define OMAP3_SHOW_FEATURE(feat) \ @@ -361,30 +386,54 @@ static void __init omap3_cpuinfo(void) strcpy(cpu_name, "OMAP3503"); } - switch (rev) { - case OMAP_REVBITS_00: - strcpy(cpu_rev, "1.0"); - break; - case OMAP_REVBITS_01: - strcpy(cpu_rev, "1.1"); - break; - case OMAP_REVBITS_02: - strcpy(cpu_rev, "1.2"); - break; - case OMAP_REVBITS_10: - strcpy(cpu_rev, "2.0"); - break; - case OMAP_REVBITS_20: - strcpy(cpu_rev, "2.1"); - break; - case OMAP_REVBITS_30: - strcpy(cpu_rev, "3.0"); - break; - case OMAP_REVBITS_40: - /* FALLTHROUGH */ - default: - /* Use the latest known revision as default */ - strcpy(cpu_rev, "3.1"); + if (cpu_is_omap3630()) { + switch (rev) { + case OMAP_REVBITS_00: + strcpy(cpu_rev, "1.0"); + break; + case OMAP_REVBITS_01: + strcpy(cpu_rev, "1.1"); + break; + case OMAP_REVBITS_02: + /* FALLTHROUGH */ + default: + /* Use the latest known revision as default */ + strcpy(cpu_rev, "1.2"); + } + } else if (cpu_is_omap3505() || cpu_is_omap3517()) { + switch (rev) { + case OMAP_REVBITS_00: + strcpy(cpu_rev, "1.0"); + break; + case OMAP_REVBITS_01: + /* FALLTHROUGH */ + default: + /* Use the latest known revision as default */ + strcpy(cpu_rev, "1.1"); + } + } else { + switch (rev) { + case OMAP_REVBITS_00: + strcpy(cpu_rev, "1.0"); + break; + case OMAP_REVBITS_01: + strcpy(cpu_rev, "2.0"); + break; + case OMAP_REVBITS_02: + strcpy(cpu_rev, "2.1"); + break; + case OMAP_REVBITS_03: + strcpy(cpu_rev, "3.0"); + break; + case OMAP_REVBITS_04: + strcpy(cpu_rev, "3.1"); + break; + case OMAP_REVBITS_05: + /* FALLTHROUGH */ + default: + /* Use the latest known revision as default */ + strcpy(cpu_rev, "3.1.2"); + } } /* Print verbose information */ diff --git a/arch/arm/mach-omap2/include/mach/board-rx51.h b/arch/arm/mach-omap2/include/mach/board-rx51.h new file mode 100644 index 000000000000..b76f49e7eed5 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/board-rx51.h @@ -0,0 +1,11 @@ +/* + * Defines for rx51 boards + */ + +#ifndef _OMAP_BOARD_RX51_H +#define _OMAP_BOARD_RX51_H + +extern void __init rx51_peripherals_init(void); +extern void __init rx51_video_mem_init(void); + +#endif diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h index 3af69d2c3dcd..3986f2476b1c 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -1,11 +1,7 @@ /* * Defines for zoom boards */ -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - #define ZOOM_NAND_CS 0 -extern void __init board_nand_init(struct mtd_partition *, u8 nr_parts, u8 cs); extern int __init zoom_debugboard_init(void); extern void __init zoom_peripherals_init(void); diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h new file mode 100644 index 000000000000..2f7ac70a20d8 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h @@ -0,0 +1,391 @@ +/* + * OMAP44xx CTRL_MODULE_CORE registers and bitfields + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * + * Benoit Cousson (b-cousson@ti.com) + * Santosh Shilimkar (santosh.shilimkar@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H + + +/* Base address */ +#define OMAP4_CTRL_MODULE_CORE 0x4a002000 + +/* Registers offset */ +#define OMAP4_CTRL_MODULE_CORE_IP_REVISION 0x0000 +#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO 0x0004 +#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG 0x0010 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0 0x0200 +#define OMAP4_CTRL_MODULE_CORE_ID_CODE 0x0204 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1 0x0208 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2 0x020c +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3 0x0210 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0 0x0214 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF 0x021c +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP 0x0228 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP 0x0260 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0 0x0264 +#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268 +#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4 +#define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300 +#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314 +#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318 +#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320 +#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL 0x0324 +#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL 0x0328 +#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR 0x032c +#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0 0x0330 +#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1 0x0334 +#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL 0x033c +#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL 0x0340 +#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL 0x0350 +#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL 0x0400 +#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU 0x0408 +#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0 0x042c +#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1 0x0430 +#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2 0x0434 +#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3 0x0438 +#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0 0x0440 +#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1 0x0444 +#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2 0x0448 +#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL 0x044c +#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL 0x0450 +#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL 0x0454 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0 0x0480 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1 0x0484 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2 0x0488 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3 0x048c +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4 0x0490 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5 0x0494 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6 0x0498 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7 0x049c +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8 0x04a0 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9 0x04a4 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10 0x04a8 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11 0x04ac +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12 0x04b0 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13 0x04b4 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14 0x04b8 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15 0x04bc +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16 0x04c0 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17 0x04c4 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18 0x04c8 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19 0x04cc +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20 0x04d0 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21 0x04d4 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22 0x04d8 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23 0x04dc +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24 0x04e0 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25 0x04e4 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26 0x04e8 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27 0x04ec +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28 0x04f0 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29 0x04f4 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30 0x04f8 +#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31 0x04fc + +/* Registers shifts and masks */ + +/* IP_REVISION */ +#define OMAP4_IP_REV_SCHEME_SHIFT 30 +#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30) +#define OMAP4_IP_REV_FUNC_SHIFT 16 +#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16) +#define OMAP4_IP_REV_RTL_SHIFT 11 +#define OMAP4_IP_REV_RTL_MASK (0x1f << 11) +#define OMAP4_IP_REV_MAJOR_SHIFT 8 +#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8) +#define OMAP4_IP_REV_CUSTOM_SHIFT 6 +#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6) +#define OMAP4_IP_REV_MINOR_SHIFT 0 +#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0) + +/* IP_HWINFO */ +#define OMAP4_IP_HWINFO_SHIFT 0 +#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0) + +/* IP_SYSCONFIG */ +#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2 +#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2) + +/* STD_FUSE_DIE_ID_0 */ +#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT 0 +#define OMAP4_STD_FUSE_DIE_ID_0_MASK (0xffffffff << 0) + +/* ID_CODE */ +#define OMAP4_STD_FUSE_IDCODE_SHIFT 0 +#define OMAP4_STD_FUSE_IDCODE_MASK (0xffffffff << 0) + +/* STD_FUSE_DIE_ID_1 */ +#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT 0 +#define OMAP4_STD_FUSE_DIE_ID_1_MASK (0xffffffff << 0) + +/* STD_FUSE_DIE_ID_2 */ +#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT 0 +#define OMAP4_STD_FUSE_DIE_ID_2_MASK (0xffffffff << 0) + +/* STD_FUSE_DIE_ID_3 */ +#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT 0 +#define OMAP4_STD_FUSE_DIE_ID_3_MASK (0xffffffff << 0) + +/* STD_FUSE_PROD_ID_0 */ +#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT 0 +#define OMAP4_STD_FUSE_PROD_ID_0_MASK (0xffffffff << 0) + +/* STD_FUSE_PROD_ID_1 */ +#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT 0 +#define OMAP4_STD_FUSE_PROD_ID_1_MASK (0xffffffff << 0) + +/* STD_FUSE_USB_CONF */ +#define OMAP4_USB_PROD_ID_SHIFT 16 +#define OMAP4_USB_PROD_ID_MASK (0xffff << 16) +#define OMAP4_USB_VENDOR_ID_SHIFT 0 +#define OMAP4_USB_VENDOR_ID_MASK (0xffff << 0) + +/* STD_FUSE_OPP_VDD_WKUP */ +#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT 0 +#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK (0xffffffff << 0) + +/* STD_FUSE_OPP_BGAP */ +#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT 0 +#define OMAP4_STD_FUSE_OPP_BGAP_MASK (0xffffffff << 0) + +/* STD_FUSE_OPP_DPLL_0 */ +#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT 0 +#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK (0xffffffff << 0) + +/* STD_FUSE_OPP_DPLL_1 */ +#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT 0 +#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK (0xffffffff << 0) + +/* STATUS */ +#define OMAP4_ATTILA_CONF_SHIFT 11 +#define OMAP4_ATTILA_CONF_MASK (0x3 << 11) +#define OMAP4_DEVICE_TYPE_SHIFT 8 +#define OMAP4_DEVICE_TYPE_MASK (0x7 << 8) +#define OMAP4_SYS_BOOT_SHIFT 0 +#define OMAP4_SYS_BOOT_MASK (0xff << 0) + +/* DEV_CONF */ +#define OMAP4_DEV_CONF_SHIFT 1 +#define OMAP4_DEV_CONF_MASK (0x7fffffff << 1) +#define OMAP4_USBPHY_PD_SHIFT 0 +#define OMAP4_USBPHY_PD_MASK (1 << 0) + +/* LDOVBB_IVA_VOLTAGE_CTRL */ +#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT 26 +#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK (1 << 26) +#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT 21 +#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK (0x1f << 21) +#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT 16 +#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK (0x1f << 16) +#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT 10 +#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK (1 << 10) +#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT 5 +#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK (0x1f << 5) +#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT 0 +#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK (0x1f << 0) + +/* LDOVBB_MPU_VOLTAGE_CTRL */ +#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT 26 +#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK (1 << 26) +#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT 21 +#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK (0x1f << 21) +#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT 16 +#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK (0x1f << 16) +#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT 10 +#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK (1 << 10) +#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT 5 +#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK (0x1f << 5) +#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT 0 +#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK (0x1f << 0) + +/* LDOSRAM_IVA_VOLTAGE_CTRL */ +#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT 26 +#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK (1 << 26) +#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT 21 +#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK (0x1f << 21) +#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT 16 +#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK (0x1f << 16) +#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT 10 +#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK (1 << 10) +#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT 5 +#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK (0x1f << 5) +#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT 0 +#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK (0x1f << 0) + +/* LDOSRAM_MPU_VOLTAGE_CTRL */ +#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT 26 +#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK (1 << 26) +#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT 21 +#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK (0x1f << 21) +#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT 16 +#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK (0x1f << 16) +#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT 10 +#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK (1 << 10) +#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT 5 +#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK (0x1f << 5) +#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT 0 +#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK (0x1f << 0) + +/* LDOSRAM_CORE_VOLTAGE_CTRL */ +#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT 26 +#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK (1 << 26) +#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT 21 +#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK (0x1f << 21) +#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT 16 +#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK (0x1f << 16) +#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT 10 +#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK (1 << 10) +#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT 5 +#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK (0x1f << 5) +#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT 0 +#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK (0x1f << 0) + +/* TEMP_SENSOR */ +#define OMAP4_BGAP_TEMPSOFF_SHIFT 12 +#define OMAP4_BGAP_TEMPSOFF_MASK (1 << 12) +#define OMAP4_BGAP_TSHUT_SHIFT 11 +#define OMAP4_BGAP_TSHUT_MASK (1 << 11) +#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT 10 +#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK (1 << 10) +#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT 9 +#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK (1 << 9) +#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8 +#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 8) +#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0 +#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0) + +/* DPLL_NWELL_TRIM_0 */ +#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT 29 +#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK (1 << 29) +#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT 24 +#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK (0x1f << 24) +#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT 23 +#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK (1 << 23) +#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT 18 +#define OMAP4_DPLL_PER_NWELL_TRIM_MASK (0x1f << 18) +#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT 17 +#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK (1 << 17) +#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT 12 +#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK (0x1f << 12) +#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT 11 +#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK (1 << 11) +#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT 6 +#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK (0x1f << 6) +#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT 5 +#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK (1 << 5) +#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT 0 +#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK (0x1f << 0) + +/* DPLL_NWELL_TRIM_1 */ +#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT 29 +#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK (1 << 29) +#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT 24 +#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK (0x1f << 24) +#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT 23 +#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK (1 << 23) +#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT 18 +#define OMAP4_DPLL_USB_NWELL_TRIM_MASK (0x1f << 18) +#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT 17 +#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK (1 << 17) +#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT 12 +#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK (0x1f << 12) +#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT 11 +#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK (1 << 11) +#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT 6 +#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK (0x1f << 6) +#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT 5 +#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK (1 << 5) +#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT 0 +#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK (0x1f << 0) + +/* USBOTGHS_CONTROL */ +#define OMAP4_DISCHRGVBUS_SHIFT 8 +#define OMAP4_DISCHRGVBUS_MASK (1 << 8) +#define OMAP4_CHRGVBUS_SHIFT 7 +#define OMAP4_CHRGVBUS_MASK (1 << 7) +#define OMAP4_DRVVBUS_SHIFT 6 +#define OMAP4_DRVVBUS_MASK (1 << 6) +#define OMAP4_IDPULLUP_SHIFT 5 +#define OMAP4_IDPULLUP_MASK (1 << 5) +#define OMAP4_IDDIG_SHIFT 4 +#define OMAP4_IDDIG_MASK (1 << 4) +#define OMAP4_SESSEND_SHIFT 3 +#define OMAP4_SESSEND_MASK (1 << 3) +#define OMAP4_VBUSVALID_SHIFT 2 +#define OMAP4_VBUSVALID_MASK (1 << 2) +#define OMAP4_BVALID_SHIFT 1 +#define OMAP4_BVALID_MASK (1 << 1) +#define OMAP4_AVALID_SHIFT 0 +#define OMAP4_AVALID_MASK (1 << 0) + +/* DSS_CONTROL */ +#define OMAP4_DSS_MUX6_SELECT_SHIFT 0 +#define OMAP4_DSS_MUX6_SELECT_MASK (1 << 0) + +/* HWOBS_CONTROL */ +#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT 3 +#define OMAP4_HWOBS_CLKDIV_SEL_MASK (0x1f << 3) +#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT 2 +#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK (1 << 2) +#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT 1 +#define OMAP4_HWOBS_ALL_ONE_MODE_MASK (1 << 1) +#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT 0 +#define OMAP4_HWOBS_MACRO_ENABLE_MASK (1 << 0) + +/* DEBOBS_FINAL_MUX_SEL */ +#define OMAP4_SELECT_SHIFT 0 +#define OMAP4_SELECT_MASK (0xffffffff << 0) + +/* DEBOBS_MMR_MPU */ +#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT 0 +#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK (0xf << 0) + +/* CONF_SDMA_REQ_SEL0 */ +#define OMAP4_MULT_SHIFT 0 +#define OMAP4_MULT_MASK (0x7f << 0) + +/* CONF_CLK_SEL0 */ +#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT 0 +#define OMAP4_MULT_CONF_CLK_SEL0_MASK (0x7 << 0) + +/* CONF_CLK_SEL1 */ +#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT 0 +#define OMAP4_MULT_CONF_CLK_SEL1_MASK (0x7 << 0) + +/* CONF_CLK_SEL2 */ +#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT 0 +#define OMAP4_MULT_CONF_CLK_SEL2_MASK (0x7 << 0) + +/* CONF_DPLL_FREQLOCK_SEL */ +#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT 0 +#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK (0x7 << 0) + +/* CONF_DPLL_TINITZ_SEL */ +#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT 0 +#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK (0x7 << 0) + +/* CONF_DPLL_PHASELOCK_SEL */ +#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT 0 +#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK (0x7 << 0) + +/* CONF_DEBUG_SEL_TST_0 */ +#define OMAP4_MODE_SHIFT 0 +#define OMAP4_MODE_MASK (0xf << 0) + +#endif diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h new file mode 100644 index 000000000000..c88420de1151 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h @@ -0,0 +1,1409 @@ +/* + * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * + * Benoit Cousson (b-cousson@ti.com) + * Santosh Shilimkar (santosh.shilimkar@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H + + +/* Base address */ +#define OMAP4_CTRL_MODULE_PAD_CORE 0x4a100000 + +/* Registers offset */ +#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION 0x0000 +#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO 0x0004 +#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG 0x0010 +#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0 0x01d8 +#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1 0x01dc +#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2 0x01e0 +#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3 0x01e4 +#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4 0x01e8 +#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5 0x01ec +#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6 0x01f0 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL 0x05a0 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE 0x05a4 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0 0x05a8 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1 0x05ac +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0 0x05b0 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1 0x05b4 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0 0x05b8 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1 0x05bc +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC 0x060c +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY 0x0610 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2 0x0614 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE 0x0620 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1 0x0624 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1 0x0628 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI 0x062c +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB 0x0630 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ 0x0634 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0 0x0638 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1 0x063c +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2 0x0640 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3 0x0644 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0 0x0648 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1 0x064c +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2 0x0650 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3 0x0654 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD 0x0658 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C 0x065c +#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW 0x0660 +#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R 0x0664 +#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0 0x0668 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1 0x0700 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2 0x0704 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3 0x0708 +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4 0x070c + +/* Registers shifts and masks */ + +/* IP_REVISION */ +#define OMAP4_IP_REV_SCHEME_SHIFT 30 +#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30) +#define OMAP4_IP_REV_FUNC_SHIFT 16 +#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16) +#define OMAP4_IP_REV_RTL_SHIFT 11 +#define OMAP4_IP_REV_RTL_MASK (0x1f << 11) +#define OMAP4_IP_REV_MAJOR_SHIFT 8 +#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8) +#define OMAP4_IP_REV_CUSTOM_SHIFT 6 +#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6) +#define OMAP4_IP_REV_MINOR_SHIFT 0 +#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0) + +/* IP_HWINFO */ +#define OMAP4_IP_HWINFO_SHIFT 0 +#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0) + +/* IP_SYSCONFIG */ +#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2 +#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2) + +/* PADCONF_WAKEUPEVENT_0 */ +#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT 31 +#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 31) +#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT 30 +#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK (1 << 30) +#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT 29 +#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK (1 << 29) +#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT 28 +#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK (1 << 28) +#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT 27 +#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK (1 << 27) +#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT 26 +#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK (1 << 26) +#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT 25 +#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK (1 << 25) +#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT 24 +#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK (1 << 24) +#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT 23 +#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK (1 << 23) +#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT 22 +#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK (1 << 22) +#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT 21 +#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK (1 << 21) +#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT 20 +#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK (1 << 20) +#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT 19 +#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK (1 << 19) +#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT 18 +#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK (1 << 18) +#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT 17 +#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK (1 << 17) +#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT 16 +#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK (1 << 16) +#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT 15 +#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK (1 << 15) +#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT 14 +#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK (1 << 14) +#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT 13 +#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK (1 << 13) +#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT 12 +#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK (1 << 12) +#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT 11 +#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK (1 << 11) +#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT 10 +#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK (1 << 10) +#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT 9 +#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK (1 << 9) +#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT 8 +#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK (1 << 8) +#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT 7 +#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK (1 << 7) +#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT 6 +#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK (1 << 6) +#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT 5 +#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK (1 << 5) +#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT 4 +#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK (1 << 4) +#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT 3 +#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK (1 << 3) +#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT 2 +#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK (1 << 2) +#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT 1 +#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK (1 << 1) +#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT 0 +#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK (1 << 0) + +/* PADCONF_WAKEUPEVENT_1 */ +#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 31 +#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 31) +#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT 30 +#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK (1 << 30) +#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT 29 +#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 29) +#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT 28 +#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 28) +#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT 27 +#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 27) +#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT 26 +#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 26) +#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT 25 +#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK (1 << 25) +#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT 24 +#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK (1 << 24) +#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT 23 +#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK (1 << 23) +#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT 22 +#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK (1 << 22) +#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT 21 +#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK (1 << 21) +#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT 20 +#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK (1 << 20) +#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT 19 +#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 19) +#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT 18 +#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 18) +#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT 17 +#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 17) +#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT 16 +#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 16) +#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT 15 +#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 15) +#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT 14 +#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 14) +#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT 13 +#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK (1 << 13) +#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT 12 +#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK (1 << 12) +#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT 11 +#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK (1 << 11) +#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT 10 +#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK (1 << 10) +#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT 9 +#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK (1 << 9) +#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT 8 +#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK (1 << 8) +#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT 7 +#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK (1 << 7) +#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT 6 +#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6) +#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT 5 +#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5) +#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT 4 +#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK (1 << 4) +#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT 3 +#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK (1 << 3) +#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT 2 +#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK (1 << 2) +#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT 1 +#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK (1 << 1) +#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT 0 +#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK (1 << 0) + +/* PADCONF_WAKEUPEVENT_2 */ +#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 31 +#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 31) +#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT 30 +#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 30) +#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT 29 +#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 29) +#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT 28 +#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 28) +#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 27 +#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 27) +#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 26 +#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 26) +#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 25 +#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 25) +#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 24 +#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 24) +#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 23 +#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 23) +#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 22 +#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 22) +#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 21 +#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 21) +#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 20 +#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 20) +#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 19 +#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 19) +#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT 18 +#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 18) +#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 17 +#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 17) +#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT 16 +#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK (1 << 16) +#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT 15 +#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK (1 << 15) +#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 14 +#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 14) +#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 13 +#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 13) +#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 12 +#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 12) +#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 11 +#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 11) +#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 10 +#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 10) +#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 9 +#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 9) +#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 8 +#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 8) +#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 7 +#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 7) +#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 6 +#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6) +#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 5 +#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5) +#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 4 +#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 4) +#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 3 +#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 3) +#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 2 +#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 2) +#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1 +#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1) +#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT 0 +#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK (1 << 0) + +/* PADCONF_WAKEUPEVENT_3 */ +#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT 31 +#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK (1 << 31) +#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT 30 +#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK (1 << 30) +#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT 29 +#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK (1 << 29) +#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT 28 +#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 28) +#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 27 +#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 27) +#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 26 +#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 26) +#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 25 +#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 25) +#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT 24 +#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 24) +#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT 23 +#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 23) +#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT 22 +#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 22) +#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT 21 +#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 21) +#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT 20 +#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 20) +#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT 19 +#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 19) +#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT 18 +#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 18) +#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT 17 +#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 17) +#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT 16 +#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK (1 << 16) +#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT 15 +#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15) +#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT 14 +#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14) +#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT 13 +#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK (1 << 13) +#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT 12 +#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK (1 << 12) +#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT 11 +#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK (1 << 11) +#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT 10 +#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK (1 << 10) +#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT 9 +#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK (1 << 9) +#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT 8 +#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK (1 << 8) +#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT 7 +#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK (1 << 7) +#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT 6 +#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 6) +#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT 5 +#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK (1 << 5) +#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 4 +#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 4) +#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 3 +#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 3) +#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT 2 +#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 2) +#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT 1 +#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 1) +#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT 0 +#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 0) + +/* PADCONF_WAKEUPEVENT_4 */ +#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT 31 +#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK (1 << 31) +#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT 30 +#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK (1 << 30) +#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 29 +#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 29) +#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 28 +#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 28) +#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 27 +#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 27) +#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 26 +#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 26) +#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 25 +#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 25) +#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 24 +#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 24) +#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 23 +#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 23) +#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 22 +#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 22) +#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 21 +#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 21) +#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 20 +#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 20) +#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 19 +#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 19) +#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 18 +#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 18) +#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 17 +#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 17) +#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 16 +#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 16) +#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT 15 +#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15) +#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT 14 +#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14) +#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT 13 +#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 13) +#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 12 +#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 12) +#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 11 +#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 11) +#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT 10 +#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 10) +#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 9 +#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 9) +#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 8 +#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 8) +#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 7 +#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 7) +#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 6 +#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 6) +#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT 5 +#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 5) +#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT 4 +#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 4) +#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT 3 +#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK (1 << 3) +#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT 2 +#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK (1 << 2) +#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT 1 +#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK (1 << 1) +#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT 0 +#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK (1 << 0) + +/* PADCONF_WAKEUPEVENT_5 */ +#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT 31 +#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK (1 << 31) +#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT 30 +#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK (1 << 30) +#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT 29 +#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK (1 << 29) +#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT 28 +#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK (1 << 28) +#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT 27 +#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK (1 << 27) +#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT 26 +#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK (1 << 26) +#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT 25 +#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK (1 << 25) +#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT 24 +#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK (1 << 24) +#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT 23 +#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK (1 << 23) +#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT 22 +#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK (1 << 22) +#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT 21 +#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK (1 << 21) +#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT 20 +#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK (1 << 20) +#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT 19 +#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK (1 << 19) +#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT 18 +#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK (1 << 18) +#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT 17 +#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK (1 << 17) +#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT 16 +#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK (1 << 16) +#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT 15 +#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK (1 << 15) +#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT 14 +#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK (1 << 14) +#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT 13 +#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK (1 << 13) +#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT 12 +#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK (1 << 12) +#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT 11 +#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 11) +#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10 +#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10) +#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT 9 +#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK (1 << 9) +#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT 8 +#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK (1 << 8) +#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT 7 +#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK (1 << 7) +#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT 6 +#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK (1 << 6) +#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT 5 +#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK (1 << 5) +#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT 4 +#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK (1 << 4) +#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT 3 +#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK (1 << 3) +#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT 2 +#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK (1 << 2) +#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT 1 +#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK (1 << 1) +#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT 0 +#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK (1 << 0) + +/* PADCONF_WAKEUPEVENT_6 */ +#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT 7 +#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK (1 << 7) +#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT 6 +#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK (1 << 6) +#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT 5 +#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK (1 << 5) +#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT 4 +#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK (1 << 4) +#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT 3 +#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK (1 << 3) +#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT 2 +#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK (1 << 2) +#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT 1 +#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK (1 << 1) +#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT 0 +#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK (1 << 0) + +/* CONTROL_PADCONF_GLOBAL */ +#define OMAP4_FORCE_OFFMODE_EN_SHIFT 31 +#define OMAP4_FORCE_OFFMODE_EN_MASK (1 << 31) + +/* CONTROL_PADCONF_MODE */ +#define OMAP4_VDDS_DV_BANK0_SHIFT 31 +#define OMAP4_VDDS_DV_BANK0_MASK (1 << 31) +#define OMAP4_VDDS_DV_BANK1_SHIFT 30 +#define OMAP4_VDDS_DV_BANK1_MASK (1 << 30) +#define OMAP4_VDDS_DV_BANK3_SHIFT 29 +#define OMAP4_VDDS_DV_BANK3_MASK (1 << 29) +#define OMAP4_VDDS_DV_BANK4_SHIFT 28 +#define OMAP4_VDDS_DV_BANK4_MASK (1 << 28) +#define OMAP4_VDDS_DV_BANK5_SHIFT 27 +#define OMAP4_VDDS_DV_BANK5_MASK (1 << 27) +#define OMAP4_VDDS_DV_BANK6_SHIFT 26 +#define OMAP4_VDDS_DV_BANK6_MASK (1 << 26) +#define OMAP4_VDDS_DV_C2C_SHIFT 25 +#define OMAP4_VDDS_DV_C2C_MASK (1 << 25) +#define OMAP4_VDDS_DV_CAM_SHIFT 24 +#define OMAP4_VDDS_DV_CAM_MASK (1 << 24) +#define OMAP4_VDDS_DV_GPMC_SHIFT 23 +#define OMAP4_VDDS_DV_GPMC_MASK (1 << 23) +#define OMAP4_VDDS_DV_SDMMC2_SHIFT 22 +#define OMAP4_VDDS_DV_SDMMC2_MASK (1 << 22) + +/* CONTROL_SMART1IO_PADCONF_0 */ +#define OMAP4_ABE_DR0_SC_SHIFT 30 +#define OMAP4_ABE_DR0_SC_MASK (0x3 << 30) +#define OMAP4_CAM_DR0_SC_SHIFT 28 +#define OMAP4_CAM_DR0_SC_MASK (0x3 << 28) +#define OMAP4_FREF_DR2_SC_SHIFT 26 +#define OMAP4_FREF_DR2_SC_MASK (0x3 << 26) +#define OMAP4_FREF_DR3_SC_SHIFT 24 +#define OMAP4_FREF_DR3_SC_MASK (0x3 << 24) +#define OMAP4_GPIO_DR8_SC_SHIFT 22 +#define OMAP4_GPIO_DR8_SC_MASK (0x3 << 22) +#define OMAP4_GPIO_DR9_SC_SHIFT 20 +#define OMAP4_GPIO_DR9_SC_MASK (0x3 << 20) +#define OMAP4_GPMC_DR2_SC_SHIFT 18 +#define OMAP4_GPMC_DR2_SC_MASK (0x3 << 18) +#define OMAP4_GPMC_DR3_SC_SHIFT 16 +#define OMAP4_GPMC_DR3_SC_MASK (0x3 << 16) +#define OMAP4_GPMC_DR6_SC_SHIFT 14 +#define OMAP4_GPMC_DR6_SC_MASK (0x3 << 14) +#define OMAP4_HDMI_DR0_SC_SHIFT 12 +#define OMAP4_HDMI_DR0_SC_MASK (0x3 << 12) +#define OMAP4_MCSPI1_DR0_SC_SHIFT 10 +#define OMAP4_MCSPI1_DR0_SC_MASK (0x3 << 10) +#define OMAP4_UART1_DR0_SC_SHIFT 8 +#define OMAP4_UART1_DR0_SC_MASK (0x3 << 8) +#define OMAP4_UART3_DR0_SC_SHIFT 6 +#define OMAP4_UART3_DR0_SC_MASK (0x3 << 6) +#define OMAP4_UART3_DR1_SC_SHIFT 4 +#define OMAP4_UART3_DR1_SC_MASK (0x3 << 4) +#define OMAP4_UNIPRO_DR0_SC_SHIFT 2 +#define OMAP4_UNIPRO_DR0_SC_MASK (0x3 << 2) +#define OMAP4_UNIPRO_DR1_SC_SHIFT 0 +#define OMAP4_UNIPRO_DR1_SC_MASK (0x3 << 0) + +/* CONTROL_SMART1IO_PADCONF_1 */ +#define OMAP4_ABE_DR0_LB_SHIFT 30 +#define OMAP4_ABE_DR0_LB_MASK (0x3 << 30) +#define OMAP4_CAM_DR0_LB_SHIFT 28 +#define OMAP4_CAM_DR0_LB_MASK (0x3 << 28) +#define OMAP4_FREF_DR2_LB_SHIFT 26 +#define OMAP4_FREF_DR2_LB_MASK (0x3 << 26) +#define OMAP4_FREF_DR3_LB_SHIFT 24 +#define OMAP4_FREF_DR3_LB_MASK (0x3 << 24) +#define OMAP4_GPIO_DR8_LB_SHIFT 22 +#define OMAP4_GPIO_DR8_LB_MASK (0x3 << 22) +#define OMAP4_GPIO_DR9_LB_SHIFT 20 +#define OMAP4_GPIO_DR9_LB_MASK (0x3 << 20) +#define OMAP4_GPMC_DR2_LB_SHIFT 18 +#define OMAP4_GPMC_DR2_LB_MASK (0x3 << 18) +#define OMAP4_GPMC_DR3_LB_SHIFT 16 +#define OMAP4_GPMC_DR3_LB_MASK (0x3 << 16) +#define OMAP4_GPMC_DR6_LB_SHIFT 14 +#define OMAP4_GPMC_DR6_LB_MASK (0x3 << 14) +#define OMAP4_HDMI_DR0_LB_SHIFT 12 +#define OMAP4_HDMI_DR0_LB_MASK (0x3 << 12) +#define OMAP4_MCSPI1_DR0_LB_SHIFT 10 +#define OMAP4_MCSPI1_DR0_LB_MASK (0x3 << 10) +#define OMAP4_UART1_DR0_LB_SHIFT 8 +#define OMAP4_UART1_DR0_LB_MASK (0x3 << 8) +#define OMAP4_UART3_DR0_LB_SHIFT 6 +#define OMAP4_UART3_DR0_LB_MASK (0x3 << 6) +#define OMAP4_UART3_DR1_LB_SHIFT 4 +#define OMAP4_UART3_DR1_LB_MASK (0x3 << 4) +#define OMAP4_UNIPRO_DR0_LB_SHIFT 2 +#define OMAP4_UNIPRO_DR0_LB_MASK (0x3 << 2) +#define OMAP4_UNIPRO_DR1_LB_SHIFT 0 +#define OMAP4_UNIPRO_DR1_LB_MASK (0x3 << 0) + +/* CONTROL_SMART2IO_PADCONF_0 */ +#define OMAP4_C2C_DR0_LB_SHIFT 31 +#define OMAP4_C2C_DR0_LB_MASK (1 << 31) +#define OMAP4_DPM_DR1_LB_SHIFT 30 +#define OMAP4_DPM_DR1_LB_MASK (1 << 30) +#define OMAP4_DPM_DR2_LB_SHIFT 29 +#define OMAP4_DPM_DR2_LB_MASK (1 << 29) +#define OMAP4_DPM_DR3_LB_SHIFT 28 +#define OMAP4_DPM_DR3_LB_MASK (1 << 28) +#define OMAP4_GPIO_DR0_LB_SHIFT 27 +#define OMAP4_GPIO_DR0_LB_MASK (1 << 27) +#define OMAP4_GPIO_DR1_LB_SHIFT 26 +#define OMAP4_GPIO_DR1_LB_MASK (1 << 26) +#define OMAP4_GPIO_DR10_LB_SHIFT 25 +#define OMAP4_GPIO_DR10_LB_MASK (1 << 25) +#define OMAP4_GPIO_DR2_LB_SHIFT 24 +#define OMAP4_GPIO_DR2_LB_MASK (1 << 24) +#define OMAP4_GPMC_DR0_LB_SHIFT 23 +#define OMAP4_GPMC_DR0_LB_MASK (1 << 23) +#define OMAP4_GPMC_DR1_LB_SHIFT 22 +#define OMAP4_GPMC_DR1_LB_MASK (1 << 22) +#define OMAP4_GPMC_DR4_LB_SHIFT 21 +#define OMAP4_GPMC_DR4_LB_MASK (1 << 21) +#define OMAP4_GPMC_DR5_LB_SHIFT 20 +#define OMAP4_GPMC_DR5_LB_MASK (1 << 20) +#define OMAP4_GPMC_DR7_LB_SHIFT 19 +#define OMAP4_GPMC_DR7_LB_MASK (1 << 19) +#define OMAP4_HSI2_DR0_LB_SHIFT 18 +#define OMAP4_HSI2_DR0_LB_MASK (1 << 18) +#define OMAP4_HSI2_DR1_LB_SHIFT 17 +#define OMAP4_HSI2_DR1_LB_MASK (1 << 17) +#define OMAP4_HSI2_DR2_LB_SHIFT 16 +#define OMAP4_HSI2_DR2_LB_MASK (1 << 16) +#define OMAP4_KPD_DR0_LB_SHIFT 15 +#define OMAP4_KPD_DR0_LB_MASK (1 << 15) +#define OMAP4_KPD_DR1_LB_SHIFT 14 +#define OMAP4_KPD_DR1_LB_MASK (1 << 14) +#define OMAP4_PDM_DR0_LB_SHIFT 13 +#define OMAP4_PDM_DR0_LB_MASK (1 << 13) +#define OMAP4_SDMMC2_DR0_LB_SHIFT 12 +#define OMAP4_SDMMC2_DR0_LB_MASK (1 << 12) +#define OMAP4_SDMMC3_DR0_LB_SHIFT 11 +#define OMAP4_SDMMC3_DR0_LB_MASK (1 << 11) +#define OMAP4_SDMMC4_DR0_LB_SHIFT 10 +#define OMAP4_SDMMC4_DR0_LB_MASK (1 << 10) +#define OMAP4_SDMMC4_DR1_LB_SHIFT 9 +#define OMAP4_SDMMC4_DR1_LB_MASK (1 << 9) +#define OMAP4_SPI3_DR0_LB_SHIFT 8 +#define OMAP4_SPI3_DR0_LB_MASK (1 << 8) +#define OMAP4_SPI3_DR1_LB_SHIFT 7 +#define OMAP4_SPI3_DR1_LB_MASK (1 << 7) +#define OMAP4_UART3_DR2_LB_SHIFT 6 +#define OMAP4_UART3_DR2_LB_MASK (1 << 6) +#define OMAP4_UART3_DR3_LB_SHIFT 5 +#define OMAP4_UART3_DR3_LB_MASK (1 << 5) +#define OMAP4_UART3_DR4_LB_SHIFT 4 +#define OMAP4_UART3_DR4_LB_MASK (1 << 4) +#define OMAP4_UART3_DR5_LB_SHIFT 3 +#define OMAP4_UART3_DR5_LB_MASK (1 << 3) +#define OMAP4_USBA0_DR1_LB_SHIFT 2 +#define OMAP4_USBA0_DR1_LB_MASK (1 << 2) +#define OMAP4_USBA_DR2_LB_SHIFT 1 +#define OMAP4_USBA_DR2_LB_MASK (1 << 1) + +/* CONTROL_SMART2IO_PADCONF_1 */ +#define OMAP4_USBB1_DR0_LB_SHIFT 31 +#define OMAP4_USBB1_DR0_LB_MASK (1 << 31) +#define OMAP4_USBB2_DR0_LB_SHIFT 30 +#define OMAP4_USBB2_DR0_LB_MASK (1 << 30) +#define OMAP4_USBA0_DR0_LB_SHIFT 29 +#define OMAP4_USBA0_DR0_LB_MASK (1 << 29) + +/* CONTROL_SMART3IO_PADCONF_0 */ +#define OMAP4_DMIC_DR0_MB_SHIFT 30 +#define OMAP4_DMIC_DR0_MB_MASK (0x3 << 30) +#define OMAP4_GPIO_DR3_MB_SHIFT 28 +#define OMAP4_GPIO_DR3_MB_MASK (0x3 << 28) +#define OMAP4_GPIO_DR4_MB_SHIFT 26 +#define OMAP4_GPIO_DR4_MB_MASK (0x3 << 26) +#define OMAP4_GPIO_DR5_MB_SHIFT 24 +#define OMAP4_GPIO_DR5_MB_MASK (0x3 << 24) +#define OMAP4_GPIO_DR6_MB_SHIFT 22 +#define OMAP4_GPIO_DR6_MB_MASK (0x3 << 22) +#define OMAP4_HSI_DR1_MB_SHIFT 20 +#define OMAP4_HSI_DR1_MB_MASK (0x3 << 20) +#define OMAP4_HSI_DR2_MB_SHIFT 18 +#define OMAP4_HSI_DR2_MB_MASK (0x3 << 18) +#define OMAP4_HSI_DR3_MB_SHIFT 16 +#define OMAP4_HSI_DR3_MB_MASK (0x3 << 16) +#define OMAP4_MCBSP2_DR0_MB_SHIFT 14 +#define OMAP4_MCBSP2_DR0_MB_MASK (0x3 << 14) +#define OMAP4_MCSPI4_DR0_MB_SHIFT 12 +#define OMAP4_MCSPI4_DR0_MB_MASK (0x3 << 12) +#define OMAP4_MCSPI4_DR1_MB_SHIFT 10 +#define OMAP4_MCSPI4_DR1_MB_MASK (0x3 << 10) +#define OMAP4_SDMMC3_DR0_MB_SHIFT 8 +#define OMAP4_SDMMC3_DR0_MB_MASK (0x3 << 8) +#define OMAP4_SPI2_DR0_MB_SHIFT 0 +#define OMAP4_SPI2_DR0_MB_MASK (0x3 << 0) + +/* CONTROL_SMART3IO_PADCONF_1 */ +#define OMAP4_SPI2_DR1_MB_SHIFT 30 +#define OMAP4_SPI2_DR1_MB_MASK (0x3 << 30) +#define OMAP4_SPI2_DR2_MB_SHIFT 28 +#define OMAP4_SPI2_DR2_MB_MASK (0x3 << 28) +#define OMAP4_UART2_DR0_MB_SHIFT 26 +#define OMAP4_UART2_DR0_MB_MASK (0x3 << 26) +#define OMAP4_UART2_DR1_MB_SHIFT 24 +#define OMAP4_UART2_DR1_MB_MASK (0x3 << 24) +#define OMAP4_UART4_DR0_MB_SHIFT 22 +#define OMAP4_UART4_DR0_MB_MASK (0x3 << 22) +#define OMAP4_HSI_DR0_MB_SHIFT 20 +#define OMAP4_HSI_DR0_MB_MASK (0x3 << 20) + +/* CONTROL_SMART3IO_PADCONF_2 */ +#define OMAP4_DMIC_DR0_LB_SHIFT 31 +#define OMAP4_DMIC_DR0_LB_MASK (1 << 31) +#define OMAP4_GPIO_DR3_LB_SHIFT 30 +#define OMAP4_GPIO_DR3_LB_MASK (1 << 30) +#define OMAP4_GPIO_DR4_LB_SHIFT 29 +#define OMAP4_GPIO_DR4_LB_MASK (1 << 29) +#define OMAP4_GPIO_DR5_LB_SHIFT 28 +#define OMAP4_GPIO_DR5_LB_MASK (1 << 28) +#define OMAP4_GPIO_DR6_LB_SHIFT 27 +#define OMAP4_GPIO_DR6_LB_MASK (1 << 27) +#define OMAP4_HSI_DR1_LB_SHIFT 26 +#define OMAP4_HSI_DR1_LB_MASK (1 << 26) +#define OMAP4_HSI_DR2_LB_SHIFT 25 +#define OMAP4_HSI_DR2_LB_MASK (1 << 25) +#define OMAP4_HSI_DR3_LB_SHIFT 24 +#define OMAP4_HSI_DR3_LB_MASK (1 << 24) +#define OMAP4_MCBSP2_DR0_LB_SHIFT 23 +#define OMAP4_MCBSP2_DR0_LB_MASK (1 << 23) +#define OMAP4_MCSPI4_DR0_LB_SHIFT 22 +#define OMAP4_MCSPI4_DR0_LB_MASK (1 << 22) +#define OMAP4_MCSPI4_DR1_LB_SHIFT 21 +#define OMAP4_MCSPI4_DR1_LB_MASK (1 << 21) +#define OMAP4_SLIMBUS2_DR0_LB_SHIFT 18 +#define OMAP4_SLIMBUS2_DR0_LB_MASK (1 << 18) +#define OMAP4_SPI2_DR0_LB_SHIFT 16 +#define OMAP4_SPI2_DR0_LB_MASK (1 << 16) +#define OMAP4_SPI2_DR1_LB_SHIFT 15 +#define OMAP4_SPI2_DR1_LB_MASK (1 << 15) +#define OMAP4_SPI2_DR2_LB_SHIFT 14 +#define OMAP4_SPI2_DR2_LB_MASK (1 << 14) +#define OMAP4_UART2_DR0_LB_SHIFT 13 +#define OMAP4_UART2_DR0_LB_MASK (1 << 13) +#define OMAP4_UART2_DR1_LB_SHIFT 12 +#define OMAP4_UART2_DR1_LB_MASK (1 << 12) +#define OMAP4_UART4_DR0_LB_SHIFT 11 +#define OMAP4_UART4_DR0_LB_MASK (1 << 11) +#define OMAP4_HSI_DR0_LB_SHIFT 10 +#define OMAP4_HSI_DR0_LB_MASK (1 << 10) + +/* CONTROL_USBB_HSIC */ +#define OMAP4_USBB2_DR1_SR_SHIFT 30 +#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30) +#define OMAP4_USBB2_DR1_I_SHIFT 27 +#define OMAP4_USBB2_DR1_I_MASK (0x7 << 27) +#define OMAP4_USBB1_DR1_SR_SHIFT 25 +#define OMAP4_USBB1_DR1_SR_MASK (0x3 << 25) +#define OMAP4_USBB1_DR1_I_SHIFT 22 +#define OMAP4_USBB1_DR1_I_MASK (0x7 << 22) +#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT 20 +#define OMAP4_USBB1_HSIC_DATA_WD_MASK (0x3 << 20) +#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT 18 +#define OMAP4_USBB1_HSIC_STROBE_WD_MASK (0x3 << 18) +#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT 16 +#define OMAP4_USBB2_HSIC_DATA_WD_MASK (0x3 << 16) +#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT 14 +#define OMAP4_USBB2_HSIC_STROBE_WD_MASK (0x3 << 14) +#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 13 +#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 13) +#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT 11 +#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 11) +#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 10 +#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 10) +#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT 8 +#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 8) +#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 7 +#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 7) +#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT 5 +#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 5) +#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 4 +#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 4) +#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT 2 +#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 2) + +/* CONTROL_SLIMBUS */ +#define OMAP4_SLIMBUS1_DR0_MB_SHIFT 30 +#define OMAP4_SLIMBUS1_DR0_MB_MASK (0x3 << 30) +#define OMAP4_SLIMBUS1_DR1_MB_SHIFT 28 +#define OMAP4_SLIMBUS1_DR1_MB_MASK (0x3 << 28) +#define OMAP4_SLIMBUS2_DR0_MB_SHIFT 26 +#define OMAP4_SLIMBUS2_DR0_MB_MASK (0x3 << 26) +#define OMAP4_SLIMBUS2_DR1_MB_SHIFT 24 +#define OMAP4_SLIMBUS2_DR1_MB_MASK (0x3 << 24) +#define OMAP4_SLIMBUS2_DR2_MB_SHIFT 22 +#define OMAP4_SLIMBUS2_DR2_MB_MASK (0x3 << 22) +#define OMAP4_SLIMBUS2_DR3_MB_SHIFT 20 +#define OMAP4_SLIMBUS2_DR3_MB_MASK (0x3 << 20) +#define OMAP4_SLIMBUS1_DR0_LB_SHIFT 19 +#define OMAP4_SLIMBUS1_DR0_LB_MASK (1 << 19) +#define OMAP4_SLIMBUS2_DR1_LB_SHIFT 18 +#define OMAP4_SLIMBUS2_DR1_LB_MASK (1 << 18) + +/* CONTROL_PBIASLITE */ +#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT 31 +#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK (1 << 31) +#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT 30 +#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 30) +#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT 29 +#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK (1 << 29) +#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT 28 +#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK (1 << 28) +#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT 27 +#define OMAP4_USIM_PBIASLITE_VMODE_MASK (1 << 27) +#define OMAP4_MMC1_PWRDNZ_SHIFT 26 +#define OMAP4_MMC1_PWRDNZ_MASK (1 << 26) +#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT 25 +#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK (1 << 25) +#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT 24 +#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 24) +#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT 23 +#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK (1 << 23) +#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT 22 +#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK (1 << 22) +#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT 21 +#define OMAP4_MMC1_PBIASLITE_VMODE_MASK (1 << 21) +#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT 20 +#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK (1 << 20) + +/* CONTROL_I2C_0 */ +#define OMAP4_I2C4_SDA_GLFENB_SHIFT 31 +#define OMAP4_I2C4_SDA_GLFENB_MASK (1 << 31) +#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT 29 +#define OMAP4_I2C4_SDA_LOAD_BITS_MASK (0x3 << 29) +#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT 28 +#define OMAP4_I2C4_SDA_PULLUPRESX_MASK (1 << 28) +#define OMAP4_I2C3_SDA_GLFENB_SHIFT 27 +#define OMAP4_I2C3_SDA_GLFENB_MASK (1 << 27) +#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT 25 +#define OMAP4_I2C3_SDA_LOAD_BITS_MASK (0x3 << 25) +#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT 24 +#define OMAP4_I2C3_SDA_PULLUPRESX_MASK (1 << 24) +#define OMAP4_I2C2_SDA_GLFENB_SHIFT 23 +#define OMAP4_I2C2_SDA_GLFENB_MASK (1 << 23) +#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT 21 +#define OMAP4_I2C2_SDA_LOAD_BITS_MASK (0x3 << 21) +#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT 20 +#define OMAP4_I2C2_SDA_PULLUPRESX_MASK (1 << 20) +#define OMAP4_I2C1_SDA_GLFENB_SHIFT 19 +#define OMAP4_I2C1_SDA_GLFENB_MASK (1 << 19) +#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT 17 +#define OMAP4_I2C1_SDA_LOAD_BITS_MASK (0x3 << 17) +#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT 16 +#define OMAP4_I2C1_SDA_PULLUPRESX_MASK (1 << 16) +#define OMAP4_I2C4_SCL_GLFENB_SHIFT 15 +#define OMAP4_I2C4_SCL_GLFENB_MASK (1 << 15) +#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT 13 +#define OMAP4_I2C4_SCL_LOAD_BITS_MASK (0x3 << 13) +#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT 12 +#define OMAP4_I2C4_SCL_PULLUPRESX_MASK (1 << 12) +#define OMAP4_I2C3_SCL_GLFENB_SHIFT 11 +#define OMAP4_I2C3_SCL_GLFENB_MASK (1 << 11) +#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT 9 +#define OMAP4_I2C3_SCL_LOAD_BITS_MASK (0x3 << 9) +#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT 8 +#define OMAP4_I2C3_SCL_PULLUPRESX_MASK (1 << 8) +#define OMAP4_I2C2_SCL_GLFENB_SHIFT 7 +#define OMAP4_I2C2_SCL_GLFENB_MASK (1 << 7) +#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT 5 +#define OMAP4_I2C2_SCL_LOAD_BITS_MASK (0x3 << 5) +#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT 4 +#define OMAP4_I2C2_SCL_PULLUPRESX_MASK (1 << 4) +#define OMAP4_I2C1_SCL_GLFENB_SHIFT 3 +#define OMAP4_I2C1_SCL_GLFENB_MASK (1 << 3) +#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT 1 +#define OMAP4_I2C1_SCL_LOAD_BITS_MASK (0x3 << 1) +#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT 0 +#define OMAP4_I2C1_SCL_PULLUPRESX_MASK (1 << 0) + +/* CONTROL_CAMERA_RX */ +#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT 31 +#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK (1 << 31) +#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29 +#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29) +#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24 +#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24) +#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT 22 +#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK (0x3 << 22) +#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21 +#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21) +#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19 +#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19) +#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18 +#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18) +#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16 +#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16) + +/* CONTROL_AVDAC */ +#define OMAP4_AVDAC_ACEN_SHIFT 31 +#define OMAP4_AVDAC_ACEN_MASK (1 << 31) +#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT 30 +#define OMAP4_AVDAC_TVOUTBYPASS_MASK (1 << 30) +#define OMAP4_AVDAC_INPUTINV_SHIFT 29 +#define OMAP4_AVDAC_INPUTINV_MASK (1 << 29) +#define OMAP4_AVDAC_CTL_SHIFT 13 +#define OMAP4_AVDAC_CTL_MASK (0xffff << 13) +#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT 12 +#define OMAP4_AVDAC_CTL_WR_ACK_MASK (1 << 12) + +/* CONTROL_HDMI_TX_PHY */ +#define OMAP4_HDMITXPHY_PADORDER_SHIFT 31 +#define OMAP4_HDMITXPHY_PADORDER_MASK (1 << 31) +#define OMAP4_HDMITXPHY_TXVALID_SHIFT 30 +#define OMAP4_HDMITXPHY_TXVALID_MASK (1 << 30) +#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT 29 +#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK (1 << 29) +#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT 28 +#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK (1 << 28) + +/* CONTROL_MMC2 */ +#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT 31 +#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK (1 << 31) + +/* CONTROL_DSIPHY */ +#define OMAP4_DSI2_LANEENABLE_SHIFT 29 +#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) +#define OMAP4_DSI1_LANEENABLE_SHIFT 24 +#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) +#define OMAP4_DSI1_PIPD_SHIFT 19 +#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) +#define OMAP4_DSI2_PIPD_SHIFT 14 +#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) + +/* CONTROL_MCBSPLP */ +#define OMAP4_ALBCTRLRX_FSX_SHIFT 31 +#define OMAP4_ALBCTRLRX_FSX_MASK (1 << 31) +#define OMAP4_ALBCTRLRX_CLKX_SHIFT 30 +#define OMAP4_ALBCTRLRX_CLKX_MASK (1 << 30) +#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT 29 +#define OMAP4_ABE_MCBSP1_DR_EN_MASK (1 << 29) + +/* CONTROL_USB2PHYCORE */ +#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT 31 +#define OMAP4_USB2PHY_AUTORESUME_EN_MASK (1 << 31) +#define OMAP4_USB2PHY_DISCHGDET_SHIFT 30 +#define OMAP4_USB2PHY_DISCHGDET_MASK (1 << 30) +#define OMAP4_USB2PHY_GPIOMODE_SHIFT 29 +#define OMAP4_USB2PHY_GPIOMODE_MASK (1 << 29) +#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT 28 +#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK (1 << 28) +#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT 27 +#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK (1 << 27) +#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT 26 +#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK (1 << 26) +#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT 25 +#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK (1 << 25) +#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT 24 +#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK (1 << 24) +#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT 21 +#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK (0x7 << 21) +#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT 20 +#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK (1 << 20) +#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT 19 +#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK (1 << 19) +#define OMAP4_USB2PHY_DATADET_SHIFT 18 +#define OMAP4_USB2PHY_DATADET_MASK (1 << 18) +#define OMAP4_USB2PHY_SINKONDP_SHIFT 17 +#define OMAP4_USB2PHY_SINKONDP_MASK (1 << 17) +#define OMAP4_USB2PHY_SRCONDM_SHIFT 16 +#define OMAP4_USB2PHY_SRCONDM_MASK (1 << 16) +#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT 15 +#define OMAP4_USB2PHY_RESTARTCHGDET_MASK (1 << 15) +#define OMAP4_USB2PHY_CHGDETDONE_SHIFT 14 +#define OMAP4_USB2PHY_CHGDETDONE_MASK (1 << 14) +#define OMAP4_USB2PHY_CHGDETECTED_SHIFT 13 +#define OMAP4_USB2PHY_CHGDETECTED_MASK (1 << 13) +#define OMAP4_USB2PHY_MCPCPUEN_SHIFT 12 +#define OMAP4_USB2PHY_MCPCPUEN_MASK (1 << 12) +#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT 11 +#define OMAP4_USB2PHY_MCPCMODEEN_MASK (1 << 11) +#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT 10 +#define OMAP4_USB2PHY_RESETDONEMCLK_MASK (1 << 10) +#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT 9 +#define OMAP4_USB2PHY_UTMIRESETDONE_MASK (1 << 9) +#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT 8 +#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK (1 << 8) +#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT 7 +#define OMAP4_USB2PHY_DATAPOLARITYN_MASK (1 << 7) +#define OMAP4_USBDPLL_FREQLOCK_SHIFT 6 +#define OMAP4_USBDPLL_FREQLOCK_MASK (1 << 6) +#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT 5 +#define OMAP4_USB2PHY_RESETDONETCLK_MASK (1 << 5) + +/* CONTROL_I2C_1 */ +#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT 31 +#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK (1 << 31) +#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT 29 +#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK (0x3 << 29) +#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT 28 +#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK (1 << 28) +#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT 27 +#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK (1 << 27) +#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT 25 +#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK (0x3 << 25) +#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT 24 +#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK (1 << 24) +#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT 23 +#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK (1 << 23) +#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT 22 +#define OMAP4_HDMI_DDC_SDA_NMODE_MASK (1 << 22) +#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT 21 +#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK (1 << 21) +#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT 20 +#define OMAP4_HDMI_DDC_SCL_NMODE_MASK (1 << 20) + +/* CONTROL_MMC1 */ +#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT 31 +#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK (1 << 31) +#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT 30 +#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK (1 << 30) +#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT 29 +#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK (1 << 29) +#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT 28 +#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK (1 << 28) +#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT 27 +#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK (1 << 27) +#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT 26 +#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK (1 << 26) +#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT 25 +#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK (1 << 25) +#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT 24 +#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK (1 << 24) +#define OMAP4_USB_FD_CDEN_SHIFT 23 +#define OMAP4_USB_FD_CDEN_MASK (1 << 23) +#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT 22 +#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK (1 << 22) +#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT 21 +#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK (1 << 21) + +/* CONTROL_HSI */ +#define OMAP4_HSI1_CALLOOP_SEL_SHIFT 31 +#define OMAP4_HSI1_CALLOOP_SEL_MASK (1 << 31) +#define OMAP4_HSI1_CALMUX_SEL_SHIFT 30 +#define OMAP4_HSI1_CALMUX_SEL_MASK (1 << 30) +#define OMAP4_HSI2_CALLOOP_SEL_SHIFT 29 +#define OMAP4_HSI2_CALLOOP_SEL_MASK (1 << 29) +#define OMAP4_HSI2_CALMUX_SEL_SHIFT 28 +#define OMAP4_HSI2_CALMUX_SEL_MASK (1 << 28) + +/* CONTROL_USB */ +#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT 31 +#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK (1 << 31) +#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT 30 +#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK (1 << 30) + +/* CONTROL_HDQ */ +#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT 31 +#define OMAP4_HDQ_SIO_PWRDNZ_MASK (1 << 31) + +/* CONTROL_LPDDR2IO1_0 */ +#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT 30 +#define OMAP4_LPDDR2IO1_GR4_SR_MASK (0x3 << 30) +#define OMAP4_LPDDR2IO1_GR4_I_SHIFT 27 +#define OMAP4_LPDDR2IO1_GR4_I_MASK (0x7 << 27) +#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT 25 +#define OMAP4_LPDDR2IO1_GR4_WD_MASK (0x3 << 25) +#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT 22 +#define OMAP4_LPDDR2IO1_GR3_SR_MASK (0x3 << 22) +#define OMAP4_LPDDR2IO1_GR3_I_SHIFT 19 +#define OMAP4_LPDDR2IO1_GR3_I_MASK (0x7 << 19) +#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT 17 +#define OMAP4_LPDDR2IO1_GR3_WD_MASK (0x3 << 17) +#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT 14 +#define OMAP4_LPDDR2IO1_GR2_SR_MASK (0x3 << 14) +#define OMAP4_LPDDR2IO1_GR2_I_SHIFT 11 +#define OMAP4_LPDDR2IO1_GR2_I_MASK (0x7 << 11) +#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT 9 +#define OMAP4_LPDDR2IO1_GR2_WD_MASK (0x3 << 9) +#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT 6 +#define OMAP4_LPDDR2IO1_GR1_SR_MASK (0x3 << 6) +#define OMAP4_LPDDR2IO1_GR1_I_SHIFT 3 +#define OMAP4_LPDDR2IO1_GR1_I_MASK (0x7 << 3) +#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT 1 +#define OMAP4_LPDDR2IO1_GR1_WD_MASK (0x3 << 1) + +/* CONTROL_LPDDR2IO1_1 */ +#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT 30 +#define OMAP4_LPDDR2IO1_GR8_SR_MASK (0x3 << 30) +#define OMAP4_LPDDR2IO1_GR8_I_SHIFT 27 +#define OMAP4_LPDDR2IO1_GR8_I_MASK (0x7 << 27) +#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT 25 +#define OMAP4_LPDDR2IO1_GR8_WD_MASK (0x3 << 25) +#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT 22 +#define OMAP4_LPDDR2IO1_GR7_SR_MASK (0x3 << 22) +#define OMAP4_LPDDR2IO1_GR7_I_SHIFT 19 +#define OMAP4_LPDDR2IO1_GR7_I_MASK (0x7 << 19) +#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT 17 +#define OMAP4_LPDDR2IO1_GR7_WD_MASK (0x3 << 17) +#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT 14 +#define OMAP4_LPDDR2IO1_GR6_SR_MASK (0x3 << 14) +#define OMAP4_LPDDR2IO1_GR6_I_SHIFT 11 +#define OMAP4_LPDDR2IO1_GR6_I_MASK (0x7 << 11) +#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT 9 +#define OMAP4_LPDDR2IO1_GR6_WD_MASK (0x3 << 9) +#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT 6 +#define OMAP4_LPDDR2IO1_GR5_SR_MASK (0x3 << 6) +#define OMAP4_LPDDR2IO1_GR5_I_SHIFT 3 +#define OMAP4_LPDDR2IO1_GR5_I_MASK (0x7 << 3) +#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT 1 +#define OMAP4_LPDDR2IO1_GR5_WD_MASK (0x3 << 1) + +/* CONTROL_LPDDR2IO1_2 */ +#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT 30 +#define OMAP4_LPDDR2IO1_GR11_SR_MASK (0x3 << 30) +#define OMAP4_LPDDR2IO1_GR11_I_SHIFT 27 +#define OMAP4_LPDDR2IO1_GR11_I_MASK (0x7 << 27) +#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT 25 +#define OMAP4_LPDDR2IO1_GR11_WD_MASK (0x3 << 25) +#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT 22 +#define OMAP4_LPDDR2IO1_GR10_SR_MASK (0x3 << 22) +#define OMAP4_LPDDR2IO1_GR10_I_SHIFT 19 +#define OMAP4_LPDDR2IO1_GR10_I_MASK (0x7 << 19) +#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT 17 +#define OMAP4_LPDDR2IO1_GR10_WD_MASK (0x3 << 17) +#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT 14 +#define OMAP4_LPDDR2IO1_GR9_SR_MASK (0x3 << 14) +#define OMAP4_LPDDR2IO1_GR9_I_SHIFT 11 +#define OMAP4_LPDDR2IO1_GR9_I_MASK (0x7 << 11) +#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT 9 +#define OMAP4_LPDDR2IO1_GR9_WD_MASK (0x3 << 9) + +/* CONTROL_LPDDR2IO1_3 */ +#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT 31 +#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK (1 << 31) +#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT 30 +#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK (1 << 30) +#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT 29 +#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK (1 << 29) +#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT 28 +#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK (1 << 28) +#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT 27 +#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK (1 << 27) +#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT 26 +#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK (1 << 26) +#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT 25 +#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK (1 << 25) +#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT 24 +#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK (1 << 24) +#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT 23 +#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK (1 << 23) +#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT 22 +#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK (1 << 22) +#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT 21 +#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK (1 << 21) +#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT 20 +#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK (1 << 20) +#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT 19 +#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK (1 << 19) +#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT 18 +#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK (1 << 18) +#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT 17 +#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK (1 << 17) +#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT 16 +#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK (1 << 16) +#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT 15 +#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK (1 << 15) +#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT 14 +#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK (1 << 14) +#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT 13 +#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK (1 << 13) +#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT 12 +#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK (1 << 12) + +/* CONTROL_LPDDR2IO2_0 */ +#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT 30 +#define OMAP4_LPDDR2IO2_GR4_SR_MASK (0x3 << 30) +#define OMAP4_LPDDR2IO2_GR4_I_SHIFT 27 +#define OMAP4_LPDDR2IO2_GR4_I_MASK (0x7 << 27) +#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT 25 +#define OMAP4_LPDDR2IO2_GR4_WD_MASK (0x3 << 25) +#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT 22 +#define OMAP4_LPDDR2IO2_GR3_SR_MASK (0x3 << 22) +#define OMAP4_LPDDR2IO2_GR3_I_SHIFT 19 +#define OMAP4_LPDDR2IO2_GR3_I_MASK (0x7 << 19) +#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT 17 +#define OMAP4_LPDDR2IO2_GR3_WD_MASK (0x3 << 17) +#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT 14 +#define OMAP4_LPDDR2IO2_GR2_SR_MASK (0x3 << 14) +#define OMAP4_LPDDR2IO2_GR2_I_SHIFT 11 +#define OMAP4_LPDDR2IO2_GR2_I_MASK (0x7 << 11) +#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT 9 +#define OMAP4_LPDDR2IO2_GR2_WD_MASK (0x3 << 9) +#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT 6 +#define OMAP4_LPDDR2IO2_GR1_SR_MASK (0x3 << 6) +#define OMAP4_LPDDR2IO2_GR1_I_SHIFT 3 +#define OMAP4_LPDDR2IO2_GR1_I_MASK (0x7 << 3) +#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT 1 +#define OMAP4_LPDDR2IO2_GR1_WD_MASK (0x3 << 1) + +/* CONTROL_LPDDR2IO2_1 */ +#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT 30 +#define OMAP4_LPDDR2IO2_GR8_SR_MASK (0x3 << 30) +#define OMAP4_LPDDR2IO2_GR8_I_SHIFT 27 +#define OMAP4_LPDDR2IO2_GR8_I_MASK (0x7 << 27) +#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT 25 +#define OMAP4_LPDDR2IO2_GR8_WD_MASK (0x3 << 25) +#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT 22 +#define OMAP4_LPDDR2IO2_GR7_SR_MASK (0x3 << 22) +#define OMAP4_LPDDR2IO2_GR7_I_SHIFT 19 +#define OMAP4_LPDDR2IO2_GR7_I_MASK (0x7 << 19) +#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT 17 +#define OMAP4_LPDDR2IO2_GR7_WD_MASK (0x3 << 17) +#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT 14 +#define OMAP4_LPDDR2IO2_GR6_SR_MASK (0x3 << 14) +#define OMAP4_LPDDR2IO2_GR6_I_SHIFT 11 +#define OMAP4_LPDDR2IO2_GR6_I_MASK (0x7 << 11) +#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT 9 +#define OMAP4_LPDDR2IO2_GR6_WD_MASK (0x3 << 9) +#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT 6 +#define OMAP4_LPDDR2IO2_GR5_SR_MASK (0x3 << 6) +#define OMAP4_LPDDR2IO2_GR5_I_SHIFT 3 +#define OMAP4_LPDDR2IO2_GR5_I_MASK (0x7 << 3) +#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT 1 +#define OMAP4_LPDDR2IO2_GR5_WD_MASK (0x3 << 1) + +/* CONTROL_LPDDR2IO2_2 */ +#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT 30 +#define OMAP4_LPDDR2IO2_GR11_SR_MASK (0x3 << 30) +#define OMAP4_LPDDR2IO2_GR11_I_SHIFT 27 +#define OMAP4_LPDDR2IO2_GR11_I_MASK (0x7 << 27) +#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT 25 +#define OMAP4_LPDDR2IO2_GR11_WD_MASK (0x3 << 25) +#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT 22 +#define OMAP4_LPDDR2IO2_GR10_SR_MASK (0x3 << 22) +#define OMAP4_LPDDR2IO2_GR10_I_SHIFT 19 +#define OMAP4_LPDDR2IO2_GR10_I_MASK (0x7 << 19) +#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT 17 +#define OMAP4_LPDDR2IO2_GR10_WD_MASK (0x3 << 17) +#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT 14 +#define OMAP4_LPDDR2IO2_GR9_SR_MASK (0x3 << 14) +#define OMAP4_LPDDR2IO2_GR9_I_SHIFT 11 +#define OMAP4_LPDDR2IO2_GR9_I_MASK (0x7 << 11) +#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT 9 +#define OMAP4_LPDDR2IO2_GR9_WD_MASK (0x3 << 9) + +/* CONTROL_LPDDR2IO2_3 */ +#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT 31 +#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK (1 << 31) +#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT 30 +#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK (1 << 30) +#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT 29 +#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK (1 << 29) +#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT 28 +#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK (1 << 28) +#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT 27 +#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK (1 << 27) +#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT 26 +#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK (1 << 26) +#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT 25 +#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK (1 << 25) +#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT 24 +#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK (1 << 24) +#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT 23 +#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK (1 << 23) +#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT 22 +#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK (1 << 22) +#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT 21 +#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK (1 << 21) +#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT 20 +#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK (1 << 20) +#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT 19 +#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK (1 << 19) +#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT 18 +#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK (1 << 18) +#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT 17 +#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK (1 << 17) +#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT 16 +#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK (1 << 16) +#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT 15 +#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK (1 << 15) +#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT 14 +#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK (1 << 14) +#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT 13 +#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK (1 << 13) +#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT 12 +#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK (1 << 12) + +/* CONTROL_BUS_HOLD */ +#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT 31 +#define OMAP4_ABE_DMIC_DIN3_EN_MASK (1 << 31) +#define OMAP4_MCSPI1_CS3_EN_SHIFT 30 +#define OMAP4_MCSPI1_CS3_EN_MASK (1 << 30) + +/* CONTROL_C2C */ +#define OMAP4_MIRROR_MODE_EN_SHIFT 31 +#define OMAP4_MIRROR_MODE_EN_MASK (1 << 31) +#define OMAP4_C2C_SPARE_SHIFT 24 +#define OMAP4_C2C_SPARE_MASK (0x7f << 24) + +/* CORE_CONTROL_SPARE_RW */ +#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT 0 +#define OMAP4_CORE_CONTROL_SPARE_RW_MASK (0xffffffff << 0) + +/* CORE_CONTROL_SPARE_R */ +#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT 0 +#define OMAP4_CORE_CONTROL_SPARE_R_MASK (0xffffffff << 0) + +/* CORE_CONTROL_SPARE_R_C0 */ +#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT 31 +#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK (1 << 31) +#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT 30 +#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK (1 << 30) +#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT 29 +#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK (1 << 29) +#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT 28 +#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK (1 << 28) +#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT 27 +#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK (1 << 27) +#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT 26 +#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK (1 << 26) +#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT 25 +#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK (1 << 25) +#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT 24 +#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK (1 << 24) + +/* CONTROL_EFUSE_1 */ +#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT 24 +#define OMAP4_AVDAC_TRIM_BYTE3_MASK (0x7f << 24) +#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT 16 +#define OMAP4_AVDAC_TRIM_BYTE2_MASK (0xff << 16) +#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT 8 +#define OMAP4_AVDAC_TRIM_BYTE1_MASK (0xff << 8) +#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT 0 +#define OMAP4_AVDAC_TRIM_BYTE0_MASK (0xff << 0) + +/* CONTROL_EFUSE_2 */ +#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT 31 +#define OMAP4_EFUSE_SMART2TEST_P0_MASK (1 << 31) +#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT 30 +#define OMAP4_EFUSE_SMART2TEST_P1_MASK (1 << 30) +#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT 29 +#define OMAP4_EFUSE_SMART2TEST_P2_MASK (1 << 29) +#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT 28 +#define OMAP4_EFUSE_SMART2TEST_P3_MASK (1 << 28) +#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT 27 +#define OMAP4_EFUSE_SMART2TEST_N0_MASK (1 << 27) +#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT 26 +#define OMAP4_EFUSE_SMART2TEST_N1_MASK (1 << 26) +#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT 25 +#define OMAP4_EFUSE_SMART2TEST_N2_MASK (1 << 25) +#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT 24 +#define OMAP4_EFUSE_SMART2TEST_N3_MASK (1 << 24) +#define OMAP4_LPDDR2_PTV_N1_SHIFT 23 +#define OMAP4_LPDDR2_PTV_N1_MASK (1 << 23) +#define OMAP4_LPDDR2_PTV_N2_SHIFT 22 +#define OMAP4_LPDDR2_PTV_N2_MASK (1 << 22) +#define OMAP4_LPDDR2_PTV_N3_SHIFT 21 +#define OMAP4_LPDDR2_PTV_N3_MASK (1 << 21) +#define OMAP4_LPDDR2_PTV_N4_SHIFT 20 +#define OMAP4_LPDDR2_PTV_N4_MASK (1 << 20) +#define OMAP4_LPDDR2_PTV_N5_SHIFT 19 +#define OMAP4_LPDDR2_PTV_N5_MASK (1 << 19) +#define OMAP4_LPDDR2_PTV_P1_SHIFT 18 +#define OMAP4_LPDDR2_PTV_P1_MASK (1 << 18) +#define OMAP4_LPDDR2_PTV_P2_SHIFT 17 +#define OMAP4_LPDDR2_PTV_P2_MASK (1 << 17) +#define OMAP4_LPDDR2_PTV_P3_SHIFT 16 +#define OMAP4_LPDDR2_PTV_P3_MASK (1 << 16) +#define OMAP4_LPDDR2_PTV_P4_SHIFT 15 +#define OMAP4_LPDDR2_PTV_P4_MASK (1 << 15) +#define OMAP4_LPDDR2_PTV_P5_SHIFT 14 +#define OMAP4_LPDDR2_PTV_P5_MASK (1 << 14) + +/* CONTROL_EFUSE_3 */ +#define OMAP4_STD_FUSE_SPARE_1_SHIFT 24 +#define OMAP4_STD_FUSE_SPARE_1_MASK (0xff << 24) +#define OMAP4_STD_FUSE_SPARE_2_SHIFT 16 +#define OMAP4_STD_FUSE_SPARE_2_MASK (0xff << 16) +#define OMAP4_STD_FUSE_SPARE_3_SHIFT 8 +#define OMAP4_STD_FUSE_SPARE_3_MASK (0xff << 8) +#define OMAP4_STD_FUSE_SPARE_4_SHIFT 0 +#define OMAP4_STD_FUSE_SPARE_4_MASK (0xff << 0) + +/* CONTROL_EFUSE_4 */ +#define OMAP4_STD_FUSE_SPARE_5_SHIFT 24 +#define OMAP4_STD_FUSE_SPARE_5_MASK (0xff << 24) +#define OMAP4_STD_FUSE_SPARE_6_SHIFT 16 +#define OMAP4_STD_FUSE_SPARE_6_MASK (0xff << 16) +#define OMAP4_STD_FUSE_SPARE_7_SHIFT 8 +#define OMAP4_STD_FUSE_SPARE_7_MASK (0xff << 8) +#define OMAP4_STD_FUSE_SPARE_8_SHIFT 0 +#define OMAP4_STD_FUSE_SPARE_8_MASK (0xff << 0) + +#endif diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h new file mode 100644 index 000000000000..17c9b37042c0 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h @@ -0,0 +1,236 @@ +/* + * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * + * Benoit Cousson (b-cousson@ti.com) + * Santosh Shilimkar (santosh.shilimkar@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H + + +/* Base address */ +#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000 + +/* Registers offset */ +#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION 0x0000 +#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO 0x0004 +#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG 0x0010 +#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0 0x007c +#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0 0x05a0 +#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1 0x05a4 +#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE 0x05a8 +#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR 0x05ac +#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO 0x0600 +#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604 +#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG 0x0608 +#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS 0x060c +#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW 0x0614 +#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R 0x0618 +#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0 0x061c + +/* Registers shifts and masks */ + +/* IP_REVISION */ +#define OMAP4_IP_REV_SCHEME_SHIFT 30 +#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30) +#define OMAP4_IP_REV_FUNC_SHIFT 16 +#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16) +#define OMAP4_IP_REV_RTL_SHIFT 11 +#define OMAP4_IP_REV_RTL_MASK (0x1f << 11) +#define OMAP4_IP_REV_MAJOR_SHIFT 8 +#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8) +#define OMAP4_IP_REV_CUSTOM_SHIFT 6 +#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6) +#define OMAP4_IP_REV_MINOR_SHIFT 0 +#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0) + +/* IP_HWINFO */ +#define OMAP4_IP_HWINFO_SHIFT 0 +#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0) + +/* IP_SYSCONFIG */ +#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2 +#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2) + +/* PADCONF_WAKEUPEVENT_0 */ +#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT 24 +#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK (1 << 24) +#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT 23 +#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK (1 << 23) +#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT 22 +#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK (1 << 22) +#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT 21 +#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK (1 << 21) +#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT 20 +#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK (1 << 20) +#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT 19 +#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK (1 << 19) +#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT 18 +#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK (1 << 18) +#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT 17 +#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK (1 << 17) +#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT 16 +#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 16) +#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT 15 +#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 15) +#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT 14 +#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK (1 << 14) +#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT 13 +#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK (1 << 13) +#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT 12 +#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 12) +#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT 11 +#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 11) +#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10 +#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10) +#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT 9 +#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 9) +#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT 8 +#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 8) +#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT 7 +#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK (1 << 7) +#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT 6 +#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 6) +#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT 5 +#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 5) +#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT 4 +#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK (1 << 4) +#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT 3 +#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK (1 << 3) +#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT 2 +#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK (1 << 2) +#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1 +#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1) +#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT 0 +#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK (1 << 0) + +/* CONTROL_SMART1NOPMIO_PADCONF_0 */ +#define OMAP4_FREF_DR0_SC_SHIFT 30 +#define OMAP4_FREF_DR0_SC_MASK (0x3 << 30) +#define OMAP4_FREF_DR1_SC_SHIFT 28 +#define OMAP4_FREF_DR1_SC_MASK (0x3 << 28) +#define OMAP4_FREF_DR4_SC_SHIFT 26 +#define OMAP4_FREF_DR4_SC_MASK (0x3 << 26) +#define OMAP4_FREF_DR5_SC_SHIFT 24 +#define OMAP4_FREF_DR5_SC_MASK (0x3 << 24) +#define OMAP4_FREF_DR6_SC_SHIFT 22 +#define OMAP4_FREF_DR6_SC_MASK (0x3 << 22) +#define OMAP4_FREF_DR7_SC_SHIFT 20 +#define OMAP4_FREF_DR7_SC_MASK (0x3 << 20) +#define OMAP4_GPIO_DR7_SC_SHIFT 18 +#define OMAP4_GPIO_DR7_SC_MASK (0x3 << 18) +#define OMAP4_DPM_DR0_SC_SHIFT 14 +#define OMAP4_DPM_DR0_SC_MASK (0x3 << 14) +#define OMAP4_SIM_DR0_SC_SHIFT 12 +#define OMAP4_SIM_DR0_SC_MASK (0x3 << 12) + +/* CONTROL_SMART1NOPMIO_PADCONF_1 */ +#define OMAP4_FREF_DR0_LB_SHIFT 30 +#define OMAP4_FREF_DR0_LB_MASK (0x3 << 30) +#define OMAP4_FREF_DR1_LB_SHIFT 28 +#define OMAP4_FREF_DR1_LB_MASK (0x3 << 28) +#define OMAP4_FREF_DR4_LB_SHIFT 26 +#define OMAP4_FREF_DR4_LB_MASK (0x3 << 26) +#define OMAP4_FREF_DR5_LB_SHIFT 24 +#define OMAP4_FREF_DR5_LB_MASK (0x3 << 24) +#define OMAP4_FREF_DR6_LB_SHIFT 22 +#define OMAP4_FREF_DR6_LB_MASK (0x3 << 22) +#define OMAP4_FREF_DR7_LB_SHIFT 20 +#define OMAP4_FREF_DR7_LB_MASK (0x3 << 20) +#define OMAP4_GPIO_DR7_LB_SHIFT 18 +#define OMAP4_GPIO_DR7_LB_MASK (0x3 << 18) +#define OMAP4_DPM_DR0_LB_SHIFT 14 +#define OMAP4_DPM_DR0_LB_MASK (0x3 << 14) +#define OMAP4_SIM_DR0_LB_SHIFT 12 +#define OMAP4_SIM_DR0_LB_MASK (0x3 << 12) + +/* CONTROL_PADCONF_MODE */ +#define OMAP4_VDDS_DV_FREF_SHIFT 31 +#define OMAP4_VDDS_DV_FREF_MASK (1 << 31) +#define OMAP4_VDDS_DV_BANK2_SHIFT 30 +#define OMAP4_VDDS_DV_BANK2_MASK (1 << 30) + +/* CONTROL_XTAL_OSCILLATOR */ +#define OMAP4_OSCILLATOR_BOOST_SHIFT 31 +#define OMAP4_OSCILLATOR_BOOST_MASK (1 << 31) +#define OMAP4_OSCILLATOR_OS_OUT_SHIFT 30 +#define OMAP4_OSCILLATOR_OS_OUT_MASK (1 << 30) + +/* CONTROL_USIMIO */ +#define OMAP4_PAD_USIM_CLK_LOW_SHIFT 31 +#define OMAP4_PAD_USIM_CLK_LOW_MASK (1 << 31) +#define OMAP4_PAD_USIM_RST_LOW_SHIFT 29 +#define OMAP4_PAD_USIM_RST_LOW_MASK (1 << 29) +#define OMAP4_USIM_PWRDNZ_SHIFT 28 +#define OMAP4_USIM_PWRDNZ_MASK (1 << 28) + +/* CONTROL_I2C_2 */ +#define OMAP4_SR_SDA_GLFENB_SHIFT 31 +#define OMAP4_SR_SDA_GLFENB_MASK (1 << 31) +#define OMAP4_SR_SDA_LOAD_BITS_SHIFT 29 +#define OMAP4_SR_SDA_LOAD_BITS_MASK (0x3 << 29) +#define OMAP4_SR_SDA_PULLUPRESX_SHIFT 28 +#define OMAP4_SR_SDA_PULLUPRESX_MASK (1 << 28) +#define OMAP4_SR_SCL_GLFENB_SHIFT 27 +#define OMAP4_SR_SCL_GLFENB_MASK (1 << 27) +#define OMAP4_SR_SCL_LOAD_BITS_SHIFT 25 +#define OMAP4_SR_SCL_LOAD_BITS_MASK (0x3 << 25) +#define OMAP4_SR_SCL_PULLUPRESX_SHIFT 24 +#define OMAP4_SR_SCL_PULLUPRESX_MASK (1 << 24) + +/* CONTROL_JTAG */ +#define OMAP4_JTAG_NTRST_EN_SHIFT 31 +#define OMAP4_JTAG_NTRST_EN_MASK (1 << 31) +#define OMAP4_JTAG_TCK_EN_SHIFT 30 +#define OMAP4_JTAG_TCK_EN_MASK (1 << 30) +#define OMAP4_JTAG_RTCK_EN_SHIFT 29 +#define OMAP4_JTAG_RTCK_EN_MASK (1 << 29) +#define OMAP4_JTAG_TDI_EN_SHIFT 28 +#define OMAP4_JTAG_TDI_EN_MASK (1 << 28) +#define OMAP4_JTAG_TDO_EN_SHIFT 27 +#define OMAP4_JTAG_TDO_EN_MASK (1 << 27) + +/* CONTROL_SYS */ +#define OMAP4_SYS_NRESWARM_PIPU_SHIFT 31 +#define OMAP4_SYS_NRESWARM_PIPU_MASK (1 << 31) + +/* WKUP_CONTROL_SPARE_RW */ +#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT 0 +#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK (0xffffffff << 0) + +/* WKUP_CONTROL_SPARE_R */ +#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT 0 +#define OMAP4_WKUP_CONTROL_SPARE_R_MASK (0xffffffff << 0) + +/* WKUP_CONTROL_SPARE_R_C0 */ +#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT 31 +#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK (1 << 31) +#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT 30 +#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK (1 << 30) +#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT 29 +#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK (1 << 29) +#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT 28 +#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK (1 << 28) +#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT 27 +#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK (1 << 27) +#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT 26 +#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK (1 << 26) +#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT 25 +#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK (1 << 25) +#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT 24 +#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK (1 << 24) + +#endif diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h new file mode 100644 index 000000000000..a0af9baec3f7 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h @@ -0,0 +1,92 @@ +/* + * OMAP44xx CTRL_MODULE_WKUP registers and bitfields + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * + * Benoit Cousson (b-cousson@ti.com) + * Santosh Shilimkar (santosh.shilimkar@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H + + +/* Base address */ +#define OMAP4_CTRL_MODULE_WKUP 0x4a30c000 + +/* Registers offset */ +#define OMAP4_CTRL_MODULE_WKUP_IP_REVISION 0x0000 +#define OMAP4_CTRL_MODULE_WKUP_IP_HWINFO 0x0004 +#define OMAP4_CTRL_MODULE_WKUP_IP_SYSCONFIG 0x0010 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_0 0x0460 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_1 0x0464 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_2 0x0468 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_3 0x046c +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_4 0x0470 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_5 0x0474 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_6 0x0478 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_7 0x047c +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_8 0x0480 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_9 0x0484 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_10 0x0488 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_11 0x048c +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_12 0x0490 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_13 0x0494 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_14 0x0498 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_15 0x049c +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_16 0x04a0 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_17 0x04a4 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_18 0x04a8 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_19 0x04ac +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_20 0x04b0 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_21 0x04b4 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_22 0x04b8 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_23 0x04bc +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_24 0x04c0 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_25 0x04c4 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_26 0x04c8 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_27 0x04cc +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_28 0x04d0 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_29 0x04d4 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_30 0x04d8 +#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_31 0x04dc + +/* Registers shifts and masks */ + +/* IP_REVISION */ +#define OMAP4_IP_REV_SCHEME_SHIFT 30 +#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30) +#define OMAP4_IP_REV_FUNC_SHIFT 16 +#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16) +#define OMAP4_IP_REV_RTL_SHIFT 11 +#define OMAP4_IP_REV_RTL_MASK (0x1f << 11) +#define OMAP4_IP_REV_MAJOR_SHIFT 8 +#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8) +#define OMAP4_IP_REV_CUSTOM_SHIFT 6 +#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6) +#define OMAP4_IP_REV_MINOR_SHIFT 0 +#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0) + +/* IP_HWINFO */ +#define OMAP4_IP_HWINFO_SHIFT 0 +#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0) + +/* IP_SYSCONFIG */ +#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2 +#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2) + +/* CONF_DEBUG_SEL_TST_0 */ +#define OMAP4_WKUP_MODE_SHIFT 0 +#define OMAP4_WKUP_MODE_MASK (1 << 0) + +#endif diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h index 9ce9b6e8ad23..4da31e997efe 100644 --- a/arch/arm/mach-omap2/include/mach/vmalloc.h +++ b/arch/arm/mach-omap2/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x38000000) +#define VMALLOC_END 0xf8000000 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index b9ea70bce563..40562ddd3ee4 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -36,6 +36,7 @@ #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" +#include "io.h" #include <plat/omap-pm.h> #include <plat/powerdomain.h> @@ -323,6 +324,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, omap2430_hwmod_init(); else if (cpu_is_omap34xx()) omap3xxx_hwmod_init(); + else if (cpu_is_omap44xx()) + omap44xx_hwmod_init(); + /* The OPP tables have to be registered before a clk init */ omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps); @@ -342,9 +346,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, #ifndef CONFIG_PM_RUNTIME skip_setup_idle = 1; #endif - if (cpu_is_omap24xx() || cpu_is_omap34xx()) /* FIXME: OMAP4 */ - omap_hwmod_late_init(skip_setup_idle); - + omap_hwmod_late_init(skip_setup_idle); if (cpu_is_omap24xx() || cpu_is_omap34xx()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h new file mode 100644 index 000000000000..fd230c6cded5 --- /dev/null +++ b/arch/arm/mach-omap2/io.h @@ -0,0 +1,7 @@ + +#ifndef __MACH_OMAP2_IO_H__ +#define __MACH_OMAP2_IO_H__ + +extern int __init omap_sram_init(void); + +#endif /* __MACH_OMAP2_IO_H__ */ diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 26aeef560aa3..32eeabe9d2ab 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -47,7 +47,6 @@ static struct omap_irq_bank { } __attribute__ ((aligned(4))) irq_banks[] = { { /* MPU INTC */ - .base_reg = 0, .nr_irqs = 96, }, }; diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 42dbfa46e656..40ddecab93a9 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -181,7 +181,7 @@ static int omap2_mbox_fifo_full(struct omap_mbox *mbox) static void omap2_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { - struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv; + struct omap_mbox2_priv *p = mbox->priv; u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; l = mbox_read_reg(p->irqenable); @@ -192,7 +192,7 @@ static void omap2_mbox_enable_irq(struct omap_mbox *mbox, static void omap2_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { - struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv; + struct omap_mbox2_priv *p = mbox->priv; u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; l = mbox_read_reg(p->irqdisable); l &= ~bit; @@ -202,7 +202,7 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox, static void omap2_mbox_ack_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { - struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv; + struct omap_mbox2_priv *p = mbox->priv; u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; mbox_write_reg(bit, p->irqstatus); @@ -214,7 +214,7 @@ static void omap2_mbox_ack_irq(struct omap_mbox *mbox, static int omap2_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { - struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv; + struct omap_mbox2_priv *p = mbox->priv; u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; u32 enable = mbox_read_reg(p->irqenable); u32 status = mbox_read_reg(p->irqstatus); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 467aae245781..f9c9df5b5ff1 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -23,29 +23,86 @@ #include <plat/cpu.h> #include <plat/mcbsp.h> -#include "mux.h" +#include "control.h" -static void omap2_mcbsp2_mux_setup(void) + +/* McBSP internal signal muxing functions */ + +void omap2_mcbsp1_mux_clkr_src(u8 mux) { - omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA); - omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA); - omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA); - omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA); - omap_mux_init_gpio(117, OMAP_PULL_ENA); - /* - * TODO: Need to add MUX settings for OMAP 2430 SDP - */ + u32 v; + + v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + if (mux == CLKR_SRC_CLKR) + v &= ~OMAP2_MCBSP1_CLKR_MASK; + else if (mux == CLKR_SRC_CLKX) + v |= OMAP2_MCBSP1_CLKR_MASK; + omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); } +EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src); -static void omap2_mcbsp_request(unsigned int id) +void omap2_mcbsp1_mux_fsr_src(u8 mux) { - if (cpu_is_omap2420() && (id == OMAP_MCBSP2)) - omap2_mcbsp2_mux_setup(); + u32 v; + + v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + if (mux == FSR_SRC_FSR) + v &= ~OMAP2_MCBSP1_FSR_MASK; + else if (mux == FSR_SRC_FSX) + v |= OMAP2_MCBSP1_FSR_MASK; + omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); } +EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src); -static struct omap_mcbsp_ops omap2_mcbsp_ops = { - .request = omap2_mcbsp_request, -}; +/* McBSP CLKS source switching function */ + +int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) +{ + struct omap_mcbsp *mcbsp; + struct clk *fck_src; + char *fck_src_name; + int r; + + if (!omap_mcbsp_check_valid_id(id)) { + pr_err("%s: Invalid id (%d)\n", __func__, id + 1); + return -EINVAL; + } + mcbsp = id_to_mcbsp_ptr(id); + + if (fck_src_id == MCBSP_CLKS_PAD_SRC) + fck_src_name = "pad_fck"; + else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) + fck_src_name = "prcm_fck"; + else + return -EINVAL; + + fck_src = clk_get(mcbsp->dev, fck_src_name); + if (IS_ERR_OR_NULL(fck_src)) { + pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks", + fck_src_name); + return -EINVAL; + } + + clk_disable(mcbsp->fclk); + + r = clk_set_parent(mcbsp->fclk, fck_src); + if (IS_ERR_VALUE(r)) { + pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n", + "clks", fck_src_name); + clk_put(fck_src); + return -EINVAL; + } + + clk_enable(mcbsp->fclk); + + clk_put(fck_src); + + return 0; +} +EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); + + +/* Platform data */ #ifdef CONFIG_ARCH_OMAP2420 static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { @@ -55,7 +112,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -63,7 +119,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, }; #define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata) @@ -82,7 +137,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP24XX_MCBSP2_BASE, @@ -90,7 +144,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP2430_MCBSP3_BASE, @@ -98,7 +151,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP2430_MCBSP4_BASE, @@ -106,7 +158,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP2430_MCBSP5_BASE, @@ -114,7 +165,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, - .ops = &omap2_mcbsp_ops, }, }; #define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata) @@ -133,7 +183,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { @@ -143,7 +192,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */ }, { @@ -153,7 +201,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX, .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { @@ -162,7 +209,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX, .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { @@ -171,7 +217,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX, .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, - .ops = &omap2_mcbsp_ops, .buffer_size = 0x80, /* The FIFO has 128 locations */ }, }; @@ -189,28 +234,24 @@ static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = { .dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX, .tx_irq = OMAP44XX_IRQ_MCBSP1, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP44XX_MCBSP2_BASE, .dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX, .tx_irq = OMAP44XX_IRQ_MCBSP2, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP44XX_MCBSP3_BASE, .dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX, .dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX, .tx_irq = OMAP44XX_IRQ_MCBSP3, - .ops = &omap2_mcbsp_ops, }, { .phys_base = OMAP44XX_MCBSP4_BASE, .dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX, .dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX, .tx_irq = OMAP44XX_IRQ_MCBSP4, - .ops = &omap2_mcbsp_ops, }, }; #define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index ab403b2ed26b..074536ae401f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -23,12 +23,11 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ -#include <linux/module.h> +#include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/slab.h> -#include <linux/spinlock.h> #include <linux/list.h> +#include <linux/slab.h> #include <linux/ctype.h> #include <linux/debugfs.h> #include <linux/seq_file.h> @@ -36,8 +35,7 @@ #include <asm/system.h> -#include <plat/control.h> - +#include "control.h" #include "mux.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ @@ -87,7 +85,7 @@ static char *omap_mux_options; int __init omap_mux_init_gpio(int gpio, int val) { struct omap_mux_entry *e; - struct omap_mux *gpio_mux; + struct omap_mux *gpio_mux = NULL; u16 old_mode; u16 mux_mode; int found = 0; @@ -127,17 +125,16 @@ int __init omap_mux_init_gpio(int gpio, int val) return 0; } -int __init omap_mux_init_signal(char *muxname, int val) +int __init omap_mux_init_signal(const char *muxname, int val) { struct omap_mux_entry *e; - char *m0_name = NULL, *mode_name = NULL; - int found = 0; + const char *mode_name; + int found = 0, mode0_len = 0; mode_name = strchr(muxname, '.'); if (mode_name) { - *mode_name = '\0'; + mode0_len = strlen(muxname) - strlen(mode_name); mode_name++; - m0_name = muxname; } else { mode_name = muxname; } @@ -147,9 +144,11 @@ int __init omap_mux_init_signal(char *muxname, int val) char *m0_entry = m->muxnames[0]; int i; - if (m0_name && strcmp(m0_name, m0_entry)) + /* First check for full name in mode0.muxmode format */ + if (mode0_len && strncmp(muxname, m0_entry, mode0_len)) continue; + /* Then check for muxmode only */ for (i = 0; i < OMAP_MUX_NR_MODES; i++) { char *mode_cur = m->muxnames[i]; diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index a8e040c2c7e9..350c04f27383 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -120,7 +120,7 @@ int omap_mux_init_gpio(int gpio, int val); * @muxname: Mux name in mode0_name.signal_name format * @val: Options for the mux register value */ -int omap_mux_init_signal(char *muxname, int val); +int omap_mux_init_signal(const char *muxname, int val); #else diff --git a/arch/arm/mach-omap2/mux2420.c b/arch/arm/mach-omap2/mux2420.c index fdb04a7eb8aa..414af5434456 100644 --- a/arch/arm/mach-omap2/mux2420.c +++ b/arch/arm/mach-omap2/mux2420.c @@ -507,7 +507,7 @@ static struct omap_mux __initdata omap2420_muxmodes[] = { * Balls for 447-pin POP package */ #ifdef CONFIG_DEBUG_FS -struct omap_ball __initdata omap2420_pop_ball[] = { +static struct omap_ball __initdata omap2420_pop_ball[] = { _OMAP2420_BALLENTRY(CAM_D0, "y4", NULL), _OMAP2420_BALLENTRY(CAM_D1, "y3", NULL), _OMAP2420_BALLENTRY(CAM_D2, "u7", NULL), diff --git a/arch/arm/mach-omap2/mux2430.c b/arch/arm/mach-omap2/mux2430.c index 7dcaaa8af32a..84d2c5a7ecd7 100644 --- a/arch/arm/mach-omap2/mux2430.c +++ b/arch/arm/mach-omap2/mux2430.c @@ -586,7 +586,7 @@ static struct omap_mux __initdata omap2430_muxmodes[] = { * 447-pin s-PBGA Package, 0.00mm Ball Pitch (Bottom) */ #ifdef CONFIG_DEBUG_FS -struct omap_ball __initdata omap2430_pop_ball[] = { +static struct omap_ball __initdata omap2430_pop_ball[] = { _OMAP2430_BALLENTRY(CAM_D0, "t8", NULL), _OMAP2430_BALLENTRY(CAM_D1, "t4", NULL), _OMAP2430_BALLENTRY(CAM_D10, "r4", NULL), diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index f64d7eea3451..574e54ea3ab7 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -931,7 +931,7 @@ struct omap_ball __initdata omap3_cbc_ball[] = { * Signals different on CUS package compared to superset */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS) -struct omap_mux __initdata omap3_cus_subset[] = { +static struct omap_mux __initdata omap3_cus_subset[] = { _OMAP3_MUXENTRY(CAM_D10, 109, "cam_d10", NULL, NULL, NULL, "gpio_109", NULL, NULL, "safe_mode"), @@ -1077,7 +1077,7 @@ struct omap_mux __initdata omap3_cus_subset[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CUS) -struct omap_ball __initdata omap3_cus_ball[] = { +static struct omap_ball __initdata omap3_cus_ball[] = { _OMAP3_BALLENTRY(CAM_D0, "ab18", NULL), _OMAP3_BALLENTRY(CAM_D1, "ac18", NULL), _OMAP3_BALLENTRY(CAM_D10, "f21", NULL), @@ -1269,7 +1269,7 @@ struct omap_ball __initdata omap3_cus_ball[] = { * Signals different on CBB package comapared to superset */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB) -struct omap_mux __initdata omap3_cbb_subset[] = { +static struct omap_mux __initdata omap3_cbb_subset[] = { _OMAP3_MUXENTRY(CAM_D10, 109, "cam_d10", NULL, NULL, NULL, "gpio_109", NULL, NULL, "safe_mode"), @@ -1390,7 +1390,7 @@ struct omap_mux __initdata omap3_cbb_subset[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBB) -struct omap_ball __initdata omap3_cbb_ball[] = { +static struct omap_ball __initdata omap3_cbb_ball[] = { _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), @@ -1600,7 +1600,7 @@ struct omap_ball __initdata omap3_cbb_ball[] = { * Signals different on 36XX CBP package comapared to 34XX CBC package */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP) -struct omap_mux __initdata omap36xx_cbp_subset[] = { +static struct omap_mux __initdata omap36xx_cbp_subset[] = { _OMAP3_MUXENTRY(CAM_D0, 99, "cam_d0", NULL, "csi2_dx2", NULL, "gpio_99", NULL, NULL, "safe_mode"), @@ -1818,7 +1818,7 @@ struct omap_mux __initdata omap36xx_cbp_subset[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined (CONFIG_OMAP_PACKAGE_CBP) -struct omap_ball __initdata omap36xx_cbp_ball[] = { +static struct omap_ball __initdata omap36xx_cbp_ball[] = { _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 13dc9794dcc2..923f9f5f91ce 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -61,10 +61,14 @@ static int __init omap_l2_cache_init(void) omap_smc1(0x102, 0x1); /* - * 32KB way size, 16-way associativity, - * parity disabled + * 16-way associativity, parity disabled + * Way size - 32KB (es1.0) + * Way size - 64KB (es2.0 +) */ - l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff); + if (omap_rev() == OMAP4430_REV_ES1_0) + l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff); + else + l2x0_init(l2cache_base, 0x0e070000, 0xc0000fff); return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index cb911d7d1a3c..5a30658444d0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -13,10 +13,102 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * This code manages "OMAP modules" (on-chip devices) and their - * integration with Linux device driver and bus code. - * - * References: + * Introduction + * ------------ + * One way to view an OMAP SoC is as a collection of largely unrelated + * IP blocks connected by interconnects. The IP blocks include + * devices such as ARM processors, audio serial interfaces, UARTs, + * etc. Some of these devices, like the DSP, are created by TI; + * others, like the SGX, largely originate from external vendors. In + * TI's documentation, on-chip devices are referred to as "OMAP + * modules." Some of these IP blocks are identical across several + * OMAP versions. Others are revised frequently. + * + * These OMAP modules are tied together by various interconnects. + * Most of the address and data flow between modules is via OCP-based + * interconnects such as the L3 and L4 buses; but there are other + * interconnects that distribute the hardware clock tree, handle idle + * and reset signaling, supply power, and connect the modules to + * various pads or balls on the OMAP package. + * + * OMAP hwmod provides a consistent way to describe the on-chip + * hardware blocks and their integration into the rest of the chip. + * This description can be automatically generated from the TI + * hardware database. OMAP hwmod provides a standard, consistent API + * to reset, enable, idle, and disable these hardware blocks. And + * hwmod provides a way for other core code, such as the Linux device + * code or the OMAP power management and address space mapping code, + * to query the hardware database. + * + * Using hwmod + * ----------- + * Drivers won't call hwmod functions directly. That is done by the + * omap_device code, and in rare occasions, by custom integration code + * in arch/arm/ *omap*. The omap_device code includes functions to + * build a struct platform_device using omap_hwmod data, and that is + * currently how hwmod data is communicated to drivers and to the + * Linux driver model. Most drivers will call omap_hwmod functions only + * indirectly, via pm_runtime*() functions. + * + * From a layering perspective, here is where the OMAP hwmod code + * fits into the kernel software stack: + * + * +-------------------------------+ + * | Device driver code | + * | (e.g., drivers/) | + * +-------------------------------+ + * | Linux driver model | + * | (platform_device / | + * | platform_driver data/code) | + * +-------------------------------+ + * | OMAP core-driver integration | + * |(arch/arm/mach-omap2/devices.c)| + * +-------------------------------+ + * | omap_device code | + * | (../plat-omap/omap_device.c) | + * +-------------------------------+ + * ----> | omap_hwmod code/data | <----- + * | (../mach-omap2/omap_hwmod*) | + * +-------------------------------+ + * | OMAP clock/PRCM/register fns | + * | (__raw_{read,write}l, clk*) | + * +-------------------------------+ + * + * Device drivers should not contain any OMAP-specific code or data in + * them. They should only contain code to operate the IP block that + * the driver is responsible for. This is because these IP blocks can + * also appear in other SoCs, either from TI (such as DaVinci) or from + * other manufacturers; and drivers should be reusable across other + * platforms. + * + * The OMAP hwmod code also will attempt to reset and idle all on-chip + * devices upon boot. The goal here is for the kernel to be + * completely self-reliant and independent from bootloaders. This is + * to ensure a repeatable configuration, both to ensure consistent + * runtime behavior, and to make it easier for others to reproduce + * bugs. + * + * OMAP module activity states + * --------------------------- + * The hwmod code considers modules to be in one of several activity + * states. IP blocks start out in an UNKNOWN state, then once they + * are registered via the hwmod code, proceed to the REGISTERED state. + * Once their clock names are resolved to clock pointers, the module + * enters the CLKS_INITED state; and finally, once the module has been + * reset and the integration registers programmed, the INITIALIZED state + * is entered. The hwmod code will then place the module into either + * the IDLE state to save power, or in the case of a critical system + * module, the ENABLED state. + * + * OMAP core integration code can then call omap_hwmod*() functions + * directly to move the module between the IDLE, ENABLED, and DISABLED + * states, as needed. This is done during both the PM idle loop, and + * in the OMAP core integration code's implementation of the PM runtime + * functions. + * + * References + * ---------- + * This is a partial list. * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) @@ -50,11 +142,13 @@ #include <plat/powerdomain.h> #include <plat/clock.h> #include <plat/omap_hwmod.h> +#include <plat/prcm.h> #include "cm.h" +#include "prm.h" -/* Maximum microseconds to wait for OMAP module to reset */ -#define MAX_MODULE_RESET_WAIT 10000 +/* Maximum microseconds to wait for OMAP module to softreset */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 /* Name of the OMAP hwmod for the MPU */ #define MPU_INITIATOR_NAME "mpu" @@ -90,7 +184,7 @@ static int _update_sysc_cache(struct omap_hwmod *oh) /* XXX ensure module interface clock is up */ - oh->_sysc_cache = omap_hwmod_readl(oh, oh->class->sysc->sysc_offs); + oh->_sysc_cache = omap_hwmod_read(oh, oh->class->sysc->sysc_offs); if (!(oh->class->sysc->sysc_flags & SYSC_NO_CACHE)) oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED; @@ -117,7 +211,7 @@ static void _write_sysconfig(u32 v, struct omap_hwmod *oh) if (oh->_sysc_cache != v) { oh->_sysc_cache = v; - omap_hwmod_writel(v, oh, oh->class->sysc->sysc_offs); + omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs); } } @@ -544,6 +638,36 @@ static int _disable_clocks(struct omap_hwmod *oh) return 0; } +static void _enable_optional_clocks(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int i; + + pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) { + pr_debug("omap_hwmod: enable %s:%s\n", oc->role, + oc->_clk->name); + clk_enable(oc->_clk); + } +} + +static void _disable_optional_clocks(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int i; + + pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) { + pr_debug("omap_hwmod: disable %s:%s\n", oc->role, + oc->_clk->name); + clk_disable(oc->_clk); + } +} + /** * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use * @oh: struct omap_hwmod * @@ -622,7 +746,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) } /** - * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG + * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * * If module is marked as SWSUP_SIDLE, force the module out of slave @@ -630,7 +754,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) * as SWSUP_MSUSPEND, force the module out of master standby; * otherwise, configure it for smart-standby. No return value. */ -static void _sysc_enable(struct omap_hwmod *oh) +static void _enable_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; @@ -653,14 +777,6 @@ static void _sysc_enable(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - if (sf & SYSC_HAS_AUTOIDLE) { - idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ? - 0 : 1; - _set_module_autoidle(oh, idlemode, &v); - } - - /* XXX OCP ENAWAKEUP bit? */ - /* * XXX The clock framework should handle this, by * calling into this code. But this must wait until the @@ -671,10 +787,25 @@ static void _sysc_enable(struct omap_hwmod *oh) _set_clockactivity(oh, oh->class->sysc->clockact, &v); _write_sysconfig(v, oh); + + /* If slave is in SMARTIDLE, also enable wakeup */ + if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) + _enable_wakeup(oh); + + /* + * Set the autoidle bit only after setting the smartidle bit + * Setting this will not have any impact on the other modules. + */ + if (sf & SYSC_HAS_AUTOIDLE) { + idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ? + 0 : 1; + _set_module_autoidle(oh, idlemode, &v); + _write_sysconfig(v, oh); + } } /** - * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG + * _idle_sysc - try to put a module into idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * * If module is marked as SWSUP_SIDLE, force the module into slave @@ -682,7 +813,7 @@ static void _sysc_enable(struct omap_hwmod *oh) * as SWSUP_MSUSPEND, force the module into master standby; otherwise, * configure it for smart-standby. No return value. */ -static void _sysc_idle(struct omap_hwmod *oh) +static void _idle_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; @@ -709,13 +840,13 @@ static void _sysc_idle(struct omap_hwmod *oh) } /** - * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG + * _shutdown_sysc - force a module into idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * * Force the module into slave idle and master suspend. No return * value. */ -static void _sysc_shutdown(struct omap_hwmod *oh) +static void _shutdown_sysc(struct omap_hwmod *oh) { u32 v; u8 sf; @@ -767,10 +898,10 @@ static struct omap_hwmod *_lookup(const char *name) * @data: not used; pass NULL * * Called by omap_hwmod_late_init() (after omap2_clk_init()). - * Resolves all clock names embedded in the hwmod. Must be called - * with omap_hwmod_mutex held. Returns -EINVAL if the omap_hwmod - * has not yet been registered or if the clocks have already been - * initialized, 0 on success, or a non-zero error on failure. + * Resolves all clock names embedded in the hwmod. Returns -EINVAL if + * the omap_hwmod has not yet been registered or if the clocks have + * already been initialized, 0 on success, or a non-zero error on + * failure. */ static int _init_clocks(struct omap_hwmod *oh, void *data) { @@ -834,56 +965,202 @@ static int _wait_target_ready(struct omap_hwmod *oh) } /** + * _lookup_hardreset - return the register bit shift for this hwmod/reset line + * @oh: struct omap_hwmod * + * @name: name of the reset line in the context of this hwmod + * + * Return the bit position of the reset line that match the + * input name. Return -ENOENT if not found. + */ +static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name) +{ + int i; + + for (i = 0; i < oh->rst_lines_cnt; i++) { + const char *rst_line = oh->rst_lines[i].name; + if (!strcmp(rst_line, name)) { + u8 shift = oh->rst_lines[i].rst_shift; + pr_debug("omap_hwmod: %s: _lookup_hardreset: %s: %d\n", + oh->name, rst_line, shift); + + return shift; + } + } + + return -ENOENT; +} + +/** + * _assert_hardreset - assert the HW reset line of submodules + * contained in the hwmod module. + * @oh: struct omap_hwmod * + * @name: name of the reset line to lookup and assert + * + * Some IP like dsp, ipu or iva contain processor that require + * an HW reset line to be assert / deassert in order to enable fully + * the IP. + */ +static int _assert_hardreset(struct omap_hwmod *oh, const char *name) +{ + u8 shift; + + if (!oh) + return -EINVAL; + + shift = _lookup_hardreset(oh, name); + if (IS_ERR_VALUE(shift)) + return shift; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, + shift); + else if (cpu_is_omap44xx()) + return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg, + shift); + else + return -EINVAL; +} + +/** + * _deassert_hardreset - deassert the HW reset line of submodules contained + * in the hwmod module. + * @oh: struct omap_hwmod * + * @name: name of the reset line to look up and deassert + * + * Some IP like dsp, ipu or iva contain processor that require + * an HW reset line to be assert / deassert in order to enable fully + * the IP. + */ +static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) +{ + u8 shift; + int r; + + if (!oh) + return -EINVAL; + + shift = _lookup_hardreset(oh, name); + if (IS_ERR_VALUE(shift)) + return shift; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + r = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, + shift); + else if (cpu_is_omap44xx()) + r = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg, + shift); + else + return -EINVAL; + + if (r == -EBUSY) + pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name); + + return r; +} + +/** + * _read_hardreset - read the HW reset line state of submodules + * contained in the hwmod module + * @oh: struct omap_hwmod * + * @name: name of the reset line to look up and read + * + * Return the state of the reset line. + */ +static int _read_hardreset(struct omap_hwmod *oh, const char *name) +{ + u8 shift; + + if (!oh) + return -EINVAL; + + shift = _lookup_hardreset(oh, name); + if (IS_ERR_VALUE(shift)) + return shift; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, + shift); + } else if (cpu_is_omap44xx()) { + return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg, + shift); + } else { + return -EINVAL; + } +} + +/** * _reset - reset an omap_hwmod * @oh: struct omap_hwmod * * * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be - * enabled for this to work. Must be called with omap_hwmod_mutex - * held. Returns -EINVAL if the hwmod cannot be reset this way or if - * the hwmod is in the wrong state, -ETIMEDOUT if the module did not - * reset in time, or 0 upon success. + * enabled for this to work. Returns -EINVAL if the hwmod cannot be + * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if + * the module did not reset in time, or 0 upon success. + * + * In OMAP3 a specific SYSSTATUS register is used to get the reset status. + * Starting in OMAP4, some IPs does not have SYSSTATUS register and instead + * use the SYSCONFIG softreset bit to provide the status. + * + * Note that some IP like McBSP does have a reset control but no reset status. */ static int _reset(struct omap_hwmod *oh) { - u32 r, v; + u32 v; int c = 0; + int ret = 0; if (!oh->class->sysc || - !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET) || - (oh->class->sysc->sysc_flags & SYSS_MISSING)) + !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET)) return -EINVAL; /* clocks must be on for this operation */ if (oh->_state != _HWMOD_STATE_ENABLED) { - WARN(1, "omap_hwmod: %s: reset can only be entered from " - "enabled state\n", oh->name); + pr_warning("omap_hwmod: %s: reset can only be entered from " + "enabled state\n", oh->name); return -EINVAL; } + /* For some modules, all optionnal clocks need to be enabled as well */ + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _enable_optional_clocks(oh); + pr_debug("omap_hwmod: %s: resetting\n", oh->name); v = oh->_sysc_cache; - r = _set_softreset(oh, &v); - if (r) - return r; + ret = _set_softreset(oh, &v); + if (ret) + goto dis_opt_clks; _write_sysconfig(v, oh); - omap_test_timeout((omap_hwmod_readl(oh, oh->class->sysc->syss_offs) & - SYSS_RESETDONE_MASK), - MAX_MODULE_RESET_WAIT, c); - - if (c == MAX_MODULE_RESET_WAIT) - WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n", - oh->name, MAX_MODULE_RESET_WAIT); + if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) + omap_test_timeout((omap_hwmod_read(oh, + oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) + omap_test_timeout(!(omap_hwmod_read(oh, + oh->class->sysc->sysc_offs) + & SYSC_TYPE2_SOFTRESET_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", + oh->name, MAX_MODULE_SOFTRESET_WAIT); else - pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c); + pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c); /* * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from * _wait_target_ready() or _reset() */ - return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0; + ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0; + +dis_opt_clks: + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _disable_optional_clocks(oh); + + return ret; } /** @@ -891,9 +1168,11 @@ static int _reset(struct omap_hwmod *oh) * @oh: struct omap_hwmod * * * Enables an omap_hwmod @oh such that the MPU can access the hwmod's - * register target. Must be called with omap_hwmod_mutex held. - * Returns -EINVAL if the hwmod is in the wrong state or passes along - * the return value of _wait_target_ready(). + * register target. (This function has a full name -- + * _omap_hwmod_enable() rather than simply _enable() -- because it is + * currently required by the pm34xx.c idle loop.) Returns -EINVAL if + * the hwmod is in the wrong state or passes along the return value of + * _wait_target_ready(). */ int _omap_hwmod_enable(struct omap_hwmod *oh) { @@ -909,6 +1188,15 @@ int _omap_hwmod_enable(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: enabling\n", oh->name); + /* + * If an IP contains only one HW reset line, then de-assert it in order + * to allow to enable the clocks. Otherwise the PRCM will return + * Intransition status, and the init will failed. + */ + if ((oh->_state == _HWMOD_STATE_INITIALIZED || + oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1) + _deassert_hardreset(oh, oh->rst_lines[0].name); + /* XXX mux balls */ _add_initiator_dep(oh, mpu_oh); @@ -922,7 +1210,7 @@ int _omap_hwmod_enable(struct omap_hwmod *oh) if (oh->class->sysc) { if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED)) _update_sysc_cache(oh); - _sysc_enable(oh); + _enable_sysc(oh); } } else { pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", @@ -933,12 +1221,14 @@ int _omap_hwmod_enable(struct omap_hwmod *oh) } /** - * _idle - idle an omap_hwmod + * _omap_hwmod_idle - idle an omap_hwmod * @oh: struct omap_hwmod * * * Idles an omap_hwmod @oh. This should be called once the hwmod has - * no further work. Returns -EINVAL if the hwmod is in the wrong - * state or returns 0. + * no further work. (This function has a full name -- + * _omap_hwmod_idle() rather than simply _idle() -- because it is + * currently required by the pm34xx.c idle loop.) Returns -EINVAL if + * the hwmod is in the wrong state or returns 0. */ int _omap_hwmod_idle(struct omap_hwmod *oh) { @@ -951,7 +1241,7 @@ int _omap_hwmod_idle(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: idling\n", oh->name); if (oh->class->sysc) - _sysc_idle(oh); + _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); _disable_clocks(oh); @@ -981,10 +1271,21 @@ static int _shutdown(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: disabling\n", oh->name); if (oh->class->sysc) - _sysc_shutdown(oh); - _del_initiator_dep(oh, mpu_oh); - /* XXX what about the other system initiators here? DMA, tesla, d2d */ - _disable_clocks(oh); + _shutdown_sysc(oh); + + /* + * If an IP contains only one HW reset line, then assert it + * before disabling the clocks and shutting down the IP. + */ + if (oh->rst_lines_cnt == 1) + _assert_hardreset(oh, oh->rst_lines[0].name); + + /* clocks and deps are already disabled in idle */ + if (oh->_state == _HWMOD_STATE_ENABLED) { + _del_initiator_dep(oh, mpu_oh); + /* XXX what about the other system initiators here? dma, dsp */ + _disable_clocks(oh); + } /* XXX Should this code also force-disable the optional clocks? */ /* XXX mux any associated balls to safe mode */ @@ -1000,11 +1301,10 @@ static int _shutdown(struct omap_hwmod *oh) * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1 * * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex held. - * @skip_setup_idle is intended to be used on a system that will not - * call omap_hwmod_enable() to enable devices (e.g., a system without - * PM runtime). Returns -EINVAL if the hwmod is in the wrong state or - * returns 0. + * OCP_SYSCONFIG register. @skip_setup_idle is intended to be used on + * a system that will not call omap_hwmod_enable() to enable devices + * (e.g., a system without PM runtime). Returns -EINVAL if the hwmod + * is in the wrong state or returns 0. */ static int _setup(struct omap_hwmod *oh, void *data) { @@ -1034,8 +1334,19 @@ static int _setup(struct omap_hwmod *oh, void *data) } } + mutex_init(&oh->_mutex); oh->_state = _HWMOD_STATE_INITIALIZED; + /* + * In the case of hwmod with hardreset that should not be + * de-assert at boot time, we have to keep the module + * initialized, because we cannot enable it properly with the + * reset asserted. Exit without warning because that behavior is + * expected. + */ + if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1) + return 0; + r = _omap_hwmod_enable(oh); if (r) { pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n", @@ -1044,16 +1355,16 @@ static int _setup(struct omap_hwmod *oh, void *data) } if (!(oh->flags & HWMOD_INIT_NO_RESET)) { + _reset(oh); + /* - * XXX Do the OCP_SYSCONFIG bits need to be - * reprogrammed after a reset? If not, then this can - * be removed. If they do, then probably the - * _omap_hwmod_enable() function should be split to avoid the - * rewrite of the OCP_SYSCONFIG register. + * OCP_SYSCONFIG bits need to be reprogrammed after a softreset. + * The _omap_hwmod_enable() function should be split to + * avoid the rewrite of the OCP_SYSCONFIG register. */ if (oh->class->sysc) { _update_sysc_cache(oh); - _sysc_enable(oh); + _enable_sysc(oh); } } @@ -1067,14 +1378,20 @@ static int _setup(struct omap_hwmod *oh, void *data) /* Public functions */ -u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs) +u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) { - return __raw_readl(oh->_mpu_rt_va + reg_offs); + if (oh->flags & HWMOD_16BIT_REG) + return __raw_readw(oh->_mpu_rt_va + reg_offs); + else + return __raw_readl(oh->_mpu_rt_va + reg_offs); } -void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs) +void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) { - __raw_writel(v, oh->_mpu_rt_va + reg_offs); + if (oh->flags & HWMOD_16BIT_REG) + __raw_writew(v, oh->_mpu_rt_va + reg_offs); + else + __raw_writel(v, oh->_mpu_rt_va + reg_offs); } /** @@ -1309,7 +1626,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh) * omap_hwmod_enable - enable an omap_hwmod * @oh: struct omap_hwmod * * - * Enable an omap_hwomd @oh. Intended to be called by omap_device_enable(). + * Enable an omap_hwmod @oh. Intended to be called by omap_device_enable(). * Returns -EINVAL on error or passes along the return value from _enable(). */ int omap_hwmod_enable(struct omap_hwmod *oh) @@ -1319,9 +1636,9 @@ int omap_hwmod_enable(struct omap_hwmod *oh) if (!oh) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); r = _omap_hwmod_enable(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return r; } @@ -1331,7 +1648,7 @@ int omap_hwmod_enable(struct omap_hwmod *oh) * omap_hwmod_idle - idle an omap_hwmod * @oh: struct omap_hwmod * * - * Idle an omap_hwomd @oh. Intended to be called by omap_device_idle(). + * Idle an omap_hwmod @oh. Intended to be called by omap_device_idle(). * Returns -EINVAL on error or passes along the return value from _idle(). */ int omap_hwmod_idle(struct omap_hwmod *oh) @@ -1339,9 +1656,9 @@ int omap_hwmod_idle(struct omap_hwmod *oh) if (!oh) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _omap_hwmod_idle(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1350,7 +1667,7 @@ int omap_hwmod_idle(struct omap_hwmod *oh) * omap_hwmod_shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * * - * Shutdown an omap_hwomd @oh. Intended to be called by + * Shutdown an omap_hwmod @oh. Intended to be called by * omap_device_shutdown(). Returns -EINVAL on error or passes along * the return value from _shutdown(). */ @@ -1359,9 +1676,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh) if (!oh) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _shutdown(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1374,9 +1691,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh) */ int omap_hwmod_enable_clocks(struct omap_hwmod *oh) { - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _enable_clocks(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1389,9 +1706,9 @@ int omap_hwmod_enable_clocks(struct omap_hwmod *oh) */ int omap_hwmod_disable_clocks(struct omap_hwmod *oh) { - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _disable_clocks(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1421,7 +1738,7 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) * Forces posted writes to complete on the OCP thread handling * register writes */ - omap_hwmod_readl(oh, oh->class->sysc->sysc_offs); + omap_hwmod_read(oh, oh->class->sysc->sysc_offs); } /** @@ -1430,20 +1747,18 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) * * Under some conditions, a driver may wish to reset the entire device. * Called from omap_device code. Returns -EINVAL on error or passes along - * the return value from _reset()/_enable(). + * the return value from _reset(). */ int omap_hwmod_reset(struct omap_hwmod *oh) { int r; - if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED)) + if (!oh) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); r = _reset(oh); - if (!r) - r = _omap_hwmod_enable(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return r; } @@ -1468,7 +1783,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh) { int ret, i; - ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt; + ret = oh->mpu_irqs_cnt + oh->sdma_reqs_cnt; for (i = 0; i < oh->slaves_cnt; i++) ret += oh->slaves[i]->addr_cnt; @@ -1501,10 +1816,10 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) r++; } - for (i = 0; i < oh->sdma_chs_cnt; i++) { - (res + r)->name = (oh->sdma_chs + i)->name; - (res + r)->start = (oh->sdma_chs + i)->dma_ch; - (res + r)->end = (oh->sdma_chs + i)->dma_ch; + for (i = 0; i < oh->sdma_reqs_cnt; i++) { + (res + r)->name = (oh->sdma_reqs + i)->name; + (res + r)->start = (oh->sdma_reqs + i)->dma_req; + (res + r)->end = (oh->sdma_reqs + i)->dma_req; (res + r)->flags = IORESOURCE_DMA; r++; } @@ -1644,9 +1959,9 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _enable_wakeup(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } @@ -1669,14 +1984,92 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) return -EINVAL; - mutex_lock(&omap_hwmod_mutex); + mutex_lock(&oh->_mutex); _disable_wakeup(oh); - mutex_unlock(&omap_hwmod_mutex); + mutex_unlock(&oh->_mutex); return 0; } /** + * omap_hwmod_assert_hardreset - assert the HW reset line of submodules + * contained in the hwmod module. + * @oh: struct omap_hwmod * + * @name: name of the reset line to lookup and assert + * + * Some IP like dsp, ipu or iva contain processor that require + * an HW reset line to be assert / deassert in order to enable fully + * the IP. Returns -EINVAL if @oh is null or if the operation is not + * yet supported on this OMAP; otherwise, passes along the return value + * from _assert_hardreset(). + */ +int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name) +{ + int ret; + + if (!oh) + return -EINVAL; + + mutex_lock(&oh->_mutex); + ret = _assert_hardreset(oh, name); + mutex_unlock(&oh->_mutex); + + return ret; +} + +/** + * omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules + * contained in the hwmod module. + * @oh: struct omap_hwmod * + * @name: name of the reset line to look up and deassert + * + * Some IP like dsp, ipu or iva contain processor that require + * an HW reset line to be assert / deassert in order to enable fully + * the IP. Returns -EINVAL if @oh is null or if the operation is not + * yet supported on this OMAP; otherwise, passes along the return value + * from _deassert_hardreset(). + */ +int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name) +{ + int ret; + + if (!oh) + return -EINVAL; + + mutex_lock(&oh->_mutex); + ret = _deassert_hardreset(oh, name); + mutex_unlock(&oh->_mutex); + + return ret; +} + +/** + * omap_hwmod_read_hardreset - read the HW reset line state of submodules + * contained in the hwmod module + * @oh: struct omap_hwmod * + * @name: name of the reset line to look up and read + * + * Return the current state of the hwmod @oh's reset line named @name: + * returns -EINVAL upon parameter error or if this operation + * is unsupported on the current OMAP; otherwise, passes along the return + * value from _read_hardreset(). + */ +int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name) +{ + int ret; + + if (!oh) + return -EINVAL; + + mutex_lock(&oh->_mutex); + ret = _read_hardreset(oh, name); + mutex_unlock(&oh->_mutex); + + return ret; +} + + +/** * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname * @classname: struct omap_hwmod_class name to search for * @fn: callback function pointer to call for each hwmod in class @classname diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 3cc768e8bc04..adf6e3632a2b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -15,10 +15,12 @@ #include <mach/irqs.h> #include <plat/cpu.h> #include <plat/dma.h> +#include <plat/serial.h> #include "omap_hwmod_common_data.h" #include "prm-regbits-24xx.h" +#include "cm-regbits-24xx.h" /* * OMAP2420 hardware module integration data @@ -33,6 +35,7 @@ static struct omap_hwmod omap2420_mpu_hwmod; static struct omap_hwmod omap2420_iva_hwmod; static struct omap_hwmod omap2420_l3_main_hwmod; static struct omap_hwmod omap2420_l4_core_hwmod; +static struct omap_hwmod omap2420_wd_timer2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = { @@ -71,6 +74,9 @@ static struct omap_hwmod omap2420_l3_main_hwmod = { }; static struct omap_hwmod omap2420_l4_wkup_hwmod; +static struct omap_hwmod omap2420_uart1_hwmod; +static struct omap_hwmod omap2420_uart2_hwmod; +static struct omap_hwmod omap2420_uart3_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { @@ -79,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap2420_uart1_addr_space[] = { + { + .pa_start = OMAP2_UART1_BASE, + .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap2420_uart1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_uart1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +static struct omap_hwmod_addr_space omap2420_uart2_addr_space[] = { + { + .pa_start = OMAP2_UART2_BASE, + .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap2420_uart2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_uart2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +static struct omap_hwmod_addr_space omap2420_uart3_addr_space[] = { + { + .pa_start = OMAP2_UART3_BASE, + .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { + .master = &omap2420_l4_core_hwmod, + .slave = &omap2420_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap2420_uart3_addr_space, + .addr_cnt = ARRAY_SIZE(omap2420_uart3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = { &omap2420_l3_main__l4_core, @@ -87,6 +147,9 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = { /* Master interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = { &omap2420_l4_core__l4_wkup, + &omap2_l4_core__uart1, + &omap2_l4_core__uart2, + &omap2_l4_core__uart3, }; /* L4 CORE */ @@ -165,12 +228,206 @@ static struct omap_hwmod omap2420_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = { + { + .pa_start = 0x48022000, + .pa_end = 0x4802207f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = { + .master = &omap2420_l4_wkup_hwmod, + .slave = &omap2420_wd_timer2_hwmod, + .clk = "mpu_wdt_ick", + .addr = omap2420_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap2420_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap2420_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2420_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap2420_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = { + &omap2420_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap2420_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap2420_wd_timer_hwmod_class, + .main_clk = "mpu_wdt_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, + }, + }, + .slaves = omap2420_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* UART */ + +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +/* UART1 */ + +static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { + { .irq = INT_24XX_UART1_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = { + &omap2_l4_core__uart1, +}; + +static struct omap_hwmod omap2420_uart1_hwmod = { + .name = "uart1", + .mpu_irqs = uart1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), + .sdma_reqs = uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, + }, + }, + .slaves = omap2420_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* UART2 */ + +static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { + { .irq = INT_24XX_UART2_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = { + &omap2_l4_core__uart2, +}; + +static struct omap_hwmod omap2420_uart2_hwmod = { + .name = "uart2", + .mpu_irqs = uart2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), + .sdma_reqs = uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, + }, + }, + .slaves = omap2420_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + +/* UART3 */ + +static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { + { .irq = INT_24XX_UART3_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = { + &omap2_l4_core__uart3, +}; + +static struct omap_hwmod omap2420_uart3_hwmod = { + .name = "uart3", + .mpu_irqs = uart3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), + .sdma_reqs = uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP24XX_EN_UART3_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, + }, + }, + .slaves = omap2420_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), +}; + static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_l3_main_hwmod, &omap2420_l4_core_hwmod, &omap2420_l4_wkup_hwmod, &omap2420_mpu_hwmod, &omap2420_iva_hwmod, + &omap2420_wd_timer2_hwmod, + &omap2420_uart1_hwmod, + &omap2420_uart2_hwmod, + &omap2420_uart3_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4526628ed287..12d939e456cf 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -15,10 +15,12 @@ #include <mach/irqs.h> #include <plat/cpu.h> #include <plat/dma.h> +#include <plat/serial.h> #include "omap_hwmod_common_data.h" #include "prm-regbits-24xx.h" +#include "cm-regbits-24xx.h" /* * OMAP2430 hardware module integration data @@ -33,6 +35,7 @@ static struct omap_hwmod omap2430_mpu_hwmod; static struct omap_hwmod omap2430_iva_hwmod; static struct omap_hwmod omap2430_l3_main_hwmod; static struct omap_hwmod omap2430_l4_core_hwmod; +static struct omap_hwmod omap2430_wd_timer2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = { @@ -71,6 +74,9 @@ static struct omap_hwmod omap2430_l3_main_hwmod = { }; static struct omap_hwmod omap2430_l4_wkup_hwmod; +static struct omap_hwmod omap2430_uart1_hwmod; +static struct omap_hwmod omap2430_uart2_hwmod; +static struct omap_hwmod omap2430_uart3_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { @@ -79,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap2430_uart1_addr_space[] = { + { + .pa_start = OMAP2_UART1_BASE, + .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap2430_uart1_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_uart1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +static struct omap_hwmod_addr_space omap2430_uart2_addr_space[] = { + { + .pa_start = OMAP2_UART2_BASE, + .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap2430_uart2_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_uart2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +static struct omap_hwmod_addr_space omap2430_uart3_addr_space[] = { + { + .pa_start = OMAP2_UART3_BASE, + .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { + .master = &omap2430_l4_core_hwmod, + .slave = &omap2430_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap2430_uart3_addr_space, + .addr_cnt = ARRAY_SIZE(omap2430_uart3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = { &omap2430_l3_main__l4_core, @@ -104,6 +164,9 @@ static struct omap_hwmod omap2430_l4_core_hwmod = { /* Slave interfaces on the L4_WKUP interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = { &omap2430_l4_core__l4_wkup, + &omap2_l4_core__uart1, + &omap2_l4_core__uart2, + &omap2_l4_core__uart3, }; /* Master interfaces on the L4_WKUP interconnect */ @@ -165,12 +228,206 @@ static struct omap_hwmod omap2430_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = { + { + .pa_start = 0x49016000, + .pa_end = 0x4901607f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = { + .master = &omap2430_l4_wkup_hwmod, + .slave = &omap2430_wd_timer2_hwmod, + .clk = "mpu_wdt_ick", + .addr = omap2430_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap2430_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap2430_wd_timer_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2430_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap2430_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = { + &omap2430_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap2430_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap2430_wd_timer_hwmod_class, + .main_clk = "mpu_wdt_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, + }, + }, + .slaves = omap2430_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* UART */ + +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +/* UART1 */ + +static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { + { .irq = INT_24XX_UART1_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = { + &omap2_l4_core__uart1, +}; + +static struct omap_hwmod omap2430_uart1_hwmod = { + .name = "uart1", + .mpu_irqs = uart1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), + .sdma_reqs = uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, + }, + }, + .slaves = omap2430_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* UART2 */ + +static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { + { .irq = INT_24XX_UART2_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = { + &omap2_l4_core__uart2, +}; + +static struct omap_hwmod omap2430_uart2_hwmod = { + .name = "uart2", + .mpu_irqs = uart2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), + .sdma_reqs = uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, + }, + }, + .slaves = omap2430_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + +/* UART3 */ + +static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { + { .irq = INT_24XX_UART3_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = { + &omap2_l4_core__uart3, +}; + +static struct omap_hwmod omap2430_uart3_hwmod = { + .name = "uart3", + .mpu_irqs = uart3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), + .sdma_reqs = uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP24XX_EN_UART3_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, + }, + }, + .slaves = omap2430_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), +}; + static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, &omap2430_l4_wkup_hwmod, &omap2430_mpu_hwmod, &omap2430_iva_hwmod, + &omap2430_wd_timer2_hwmod, + &omap2430_uart1_hwmod, + &omap2430_uart2_hwmod, + &omap2430_uart3_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5d8eb58ba5e3..cb97ecf0a3f6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -17,10 +17,12 @@ #include <mach/irqs.h> #include <plat/cpu.h> #include <plat/dma.h> +#include <plat/serial.h> #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" +#include "cm-regbits-34xx.h" /* * OMAP3xxx hardware module integration data @@ -36,6 +38,7 @@ static struct omap_hwmod omap3xxx_iva_hwmod; static struct omap_hwmod omap3xxx_l3_main_hwmod; static struct omap_hwmod omap3xxx_l4_core_hwmod; static struct omap_hwmod omap3xxx_l4_per_hwmod; +static struct omap_hwmod omap3xxx_wd_timer2_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { @@ -82,6 +85,10 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod = { }; static struct omap_hwmod omap3xxx_l4_wkup_hwmod; +static struct omap_hwmod omap3xxx_uart1_hwmod; +static struct omap_hwmod omap3xxx_uart2_hwmod; +static struct omap_hwmod omap3xxx_uart3_hwmod; +static struct omap_hwmod omap3xxx_uart4_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { @@ -90,6 +97,78 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = { + { + .pa_start = OMAP3_UART1_BASE, + .pa_end = OMAP3_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap3xxx_uart1_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_uart1_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = { + { + .pa_start = OMAP3_UART2_BASE, + .pa_end = OMAP3_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap3xxx_uart2_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_uart2_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = { + { + .pa_start = OMAP3_UART3_BASE, + .pa_end = OMAP3_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap3xxx_uart3_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_uart3_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART4 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = { + { + .pa_start = OMAP3_UART4_BASE, + .pa_end = OMAP3_UART4_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_uart4_hwmod, + .clk = "uart4_ick", + .addr = omap3xxx_uart4_addr_space, + .addr_cnt = ARRAY_SIZE(omap3xxx_uart4_addr_space), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { &omap3xxx_l3_main__l4_core, @@ -98,6 +177,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { /* Master interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = { &omap3xxx_l4_core__l4_wkup, + &omap3_l4_core__uart1, + &omap3_l4_core__uart2, }; /* L4 CORE */ @@ -119,6 +200,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = { /* Master interfaces on the L4_PER interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = { + &omap3_l4_per__uart3, + &omap3_l4_per__uart4, }; /* L4 PER */ @@ -197,6 +280,235 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = { + { + .pa_start = 0x48314000, + .pa_end = 0x4831407f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = { + .master = &omap3xxx_l4_wkup_hwmod, + .slave = &omap3xxx_wd_timer2_hwmod, + .clk = "wdt2_ick", + .addr = omap3xxx_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap3xxx_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod_ocp_if *omap3xxx_wd_timer2_slaves[] = { + &omap3xxx_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap3xxx_wd_timer_hwmod_class, + .main_clk = "wdt2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_WDT2_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT, + }, + }, + .slaves = omap3xxx_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* UART common */ + +static struct omap_hwmod_class_sysconfig uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class uart_class = { + .name = "uart", + .sysc = &uart_sysc, +}; + +/* UART1 */ + +static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { + { .irq = INT_24XX_UART1_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, + { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = { + &omap3_l4_core__uart1, +}; + +static struct omap_hwmod omap3xxx_uart1_hwmod = { + .name = "uart1", + .mpu_irqs = uart1_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), + .sdma_reqs = uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_UART1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_EN_UART1_SHIFT, + }, + }, + .slaves = omap3xxx_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* UART2 */ + +static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { + { .irq = INT_24XX_UART2_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, + { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = { + &omap3_l4_core__uart2, +}; + +static struct omap_hwmod omap3xxx_uart2_hwmod = { + .name = "uart2", + .mpu_irqs = uart2_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), + .sdma_reqs = uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_UART2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_EN_UART2_SHIFT, + }, + }, + .slaves = omap3xxx_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* UART3 */ + +static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { + { .irq = INT_24XX_UART3_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, + { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = { + &omap3_l4_per__uart3, +}; + +static struct omap_hwmod omap3xxx_uart3_hwmod = { + .name = "uart3", + .mpu_irqs = uart3_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), + .sdma_reqs = uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_PER_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_UART3_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_EN_UART3_SHIFT, + }, + }, + .slaves = omap3xxx_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), +}; + +/* UART4 */ + +static struct omap_hwmod_irq_info uart4_mpu_irqs[] = { + { .irq = INT_36XX_UART4_IRQ, }, +}; + +static struct omap_hwmod_dma_info uart4_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP36XX_DMA_UART4_RX, }, + { .name = "tx", .dma_req = OMAP36XX_DMA_UART4_TX, }, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = { + &omap3_l4_per__uart4, +}; + +static struct omap_hwmod omap3xxx_uart4_hwmod = { + .name = "uart4", + .mpu_irqs = uart4_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(uart4_mpu_irqs), + .sdma_reqs = uart4_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(uart4_sdma_reqs), + .main_clk = "uart4_fck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_PER_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3630_EN_UART4_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3630_EN_UART4_SHIFT, + }, + }, + .slaves = omap3xxx_uart4_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves), + .class = &uart_class, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1), +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, @@ -204,6 +516,11 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l4_wkup_hwmod, &omap3xxx_mpu_hwmod, &omap3xxx_iva_hwmod, + &omap3xxx_wd_timer2_hwmod, + &omap3xxx_uart1_hwmod, + &omap3xxx_uart2_hwmod, + &omap3xxx_uart3_hwmod, + &omap3xxx_uart4_hwmod, NULL, }; @@ -211,5 +528,3 @@ int __init omap3xxx_hwmod_init(void) { return omap_hwmod_init(omap3xxx_hwmods); } - - diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c new file mode 100644 index 000000000000..7274db4de487 --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -0,0 +1,850 @@ +/* + * Hardware modules present on the OMAP44xx chips + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation + * + * Paul Walmsley + * Benoit Cousson + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> + +#include <plat/omap_hwmod.h> +#include <plat/cpu.h> + +#include "omap_hwmod_common_data.h" + +#include "cm.h" +#include "prm-regbits-44xx.h" + +/* Base offset for all OMAP4 interrupts external to MPUSS */ +#define OMAP44XX_IRQ_GIC_START 32 + +/* Base offset for all OMAP4 dma requests */ +#define OMAP44XX_DMA_REQ_START 1 + +/* Backward references (IPs with Bus Master capability) */ +static struct omap_hwmod omap44xx_dmm_hwmod; +static struct omap_hwmod omap44xx_emif_fw_hwmod; +static struct omap_hwmod omap44xx_l3_instr_hwmod; +static struct omap_hwmod omap44xx_l3_main_1_hwmod; +static struct omap_hwmod omap44xx_l3_main_2_hwmod; +static struct omap_hwmod omap44xx_l3_main_3_hwmod; +static struct omap_hwmod omap44xx_l4_abe_hwmod; +static struct omap_hwmod omap44xx_l4_cfg_hwmod; +static struct omap_hwmod omap44xx_l4_per_hwmod; +static struct omap_hwmod omap44xx_l4_wkup_hwmod; +static struct omap_hwmod omap44xx_mpu_hwmod; +static struct omap_hwmod omap44xx_mpu_private_hwmod; + +/* + * Interconnects omap_hwmod structures + * hwmods that compose the global OMAP interconnect + */ + +/* + * 'dmm' class + * instance(s): dmm + */ +static struct omap_hwmod_class omap44xx_dmm_hwmod_class = { + .name = "dmm", +}; + +/* dmm interface data */ +/* l3_main_1 -> dmm */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_dmm_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> dmm */ +static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_dmm_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dmm slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = { + &omap44xx_l3_main_1__dmm, + &omap44xx_mpu__dmm, +}; + +static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = { + { .irq = 113 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod omap44xx_dmm_hwmod = { + .name = "dmm", + .class = &omap44xx_dmm_hwmod_class, + .slaves = omap44xx_dmm_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves), + .mpu_irqs = omap44xx_dmm_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dmm_irqs), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'emif_fw' class + * instance(s): emif_fw + */ +static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = { + .name = "emif_fw", +}; + +/* emif_fw interface data */ +/* dmm -> emif_fw */ +static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = { + .master = &omap44xx_dmm_hwmod, + .slave = &omap44xx_emif_fw_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> emif_fw */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_emif_fw_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* emif_fw slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = { + &omap44xx_dmm__emif_fw, + &omap44xx_l4_cfg__emif_fw, +}; + +static struct omap_hwmod omap44xx_emif_fw_hwmod = { + .name = "emif_fw", + .class = &omap44xx_emif_fw_hwmod_class, + .slaves = omap44xx_emif_fw_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'l3' class + * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3 + */ +static struct omap_hwmod_class omap44xx_l3_hwmod_class = { + .name = "l3", +}; + +/* l3_instr interface data */ +/* l3_main_3 -> l3_instr */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = { + .master = &omap44xx_l3_main_3_hwmod, + .slave = &omap44xx_l3_instr_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_instr slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = { + &omap44xx_l3_main_3__l3_instr, +}; + +static struct omap_hwmod omap44xx_l3_instr_hwmod = { + .name = "l3_instr", + .class = &omap44xx_l3_hwmod_class, + .slaves = omap44xx_l3_instr_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l3_main_2 -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = { + &omap44xx_l3_main_2__l3_main_1, + &omap44xx_l4_cfg__l3_main_1, + &omap44xx_mpu__l3_main_1, +}; + +static struct omap_hwmod omap44xx_l3_main_1_hwmod = { + .name = "l3_main_1", + .class = &omap44xx_l3_hwmod_class, + .slaves = omap44xx_l3_main_1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l3_main_2 interface data */ +/* l3_main_1 -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = { + &omap44xx_l3_main_1__l3_main_2, + &omap44xx_l4_cfg__l3_main_2, +}; + +static struct omap_hwmod omap44xx_l3_main_2_hwmod = { + .name = "l3_main_2", + .class = &omap44xx_l3_hwmod_class, + .slaves = omap44xx_l3_main_2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l3_main_3 interface data */ +/* l3_main_1 -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l3_main_3_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_l3_main_3_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l3_main_3_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = { + &omap44xx_l3_main_1__l3_main_3, + &omap44xx_l3_main_2__l3_main_3, + &omap44xx_l4_cfg__l3_main_3, +}; + +static struct omap_hwmod omap44xx_l3_main_3_hwmod = { + .name = "l3_main_3", + .class = &omap44xx_l3_hwmod_class, + .slaves = omap44xx_l3_main_3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'l4' class + * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup + */ +static struct omap_hwmod_class omap44xx_l4_hwmod_class = { + .name = "l4", +}; + +/* l4_abe interface data */ +/* l3_main_1 -> l4_abe */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l4_abe_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> l4_abe */ +static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_l4_abe_hwmod, + .clk = "ocp_abe_iclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_abe slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = { + &omap44xx_l3_main_1__l4_abe, + &omap44xx_mpu__l4_abe, +}; + +static struct omap_hwmod omap44xx_l4_abe_hwmod = { + .name = "l4_abe", + .class = &omap44xx_l4_hwmod_class, + .slaves = omap44xx_l4_abe_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l4_cfg interface data */ +/* l3_main_1 -> l4_cfg */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l4_cfg_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = { + &omap44xx_l3_main_1__l4_cfg, +}; + +static struct omap_hwmod omap44xx_l4_cfg_hwmod = { + .name = "l4_cfg", + .class = &omap44xx_l4_hwmod_class, + .slaves = omap44xx_l4_cfg_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l4_per interface data */ +/* l3_main_2 -> l4_per */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_l4_per_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = { + &omap44xx_l3_main_2__l4_per, +}; + +static struct omap_hwmod omap44xx_l4_per_hwmod = { + .name = "l4_per", + .class = &omap44xx_l4_hwmod_class, + .slaves = omap44xx_l4_per_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l4_wkup interface data */ +/* l4_cfg -> l4_wkup */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l4_wkup_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = { + &omap44xx_l4_cfg__l4_wkup, +}; + +static struct omap_hwmod omap44xx_l4_wkup_hwmod = { + .name = "l4_wkup", + .class = &omap44xx_l4_hwmod_class, + .slaves = omap44xx_l4_wkup_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'mpu_bus' class + * instance(s): mpu_private + */ +static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = { + .name = "mpu_bus", +}; + +/* mpu_private interface data */ +/* mpu -> mpu_private */ +static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_mpu_private_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu_private slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = { + &omap44xx_mpu__mpu_private, +}; + +static struct omap_hwmod omap44xx_mpu_private_hwmod = { + .name = "mpu_private", + .class = &omap44xx_mpu_bus_hwmod_class, + .slaves = omap44xx_mpu_private_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'mpu' class + * mpu sub-system + */ + +static struct omap_hwmod_class omap44xx_mpu_hwmod_class = { + .name = "mpu", +}; + +/* mpu */ +static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = { + { .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START }, + { .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START }, + { .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START }, +}; + +/* mpu master ports */ +static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = { + &omap44xx_mpu__l3_main_1, + &omap44xx_mpu__l4_abe, + &omap44xx_mpu__dmm, +}; + +static struct omap_hwmod omap44xx_mpu_hwmod = { + .name = "mpu", + .class = &omap44xx_mpu_hwmod_class, + .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .mpu_irqs = omap44xx_mpu_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mpu_irqs), + .main_clk = "dpll_mpu_m2_ck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_MPU_MPU_CLKCTRL, + }, + }, + .masters = omap44xx_mpu_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +/* + * 'uart' class + * universal asynchronous receiver/transmitter (uart) + */ + +static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = { + .rev_offs = 0x0050, + .sysc_offs = 0x0054, + .syss_offs = 0x0058, + .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap44xx_wd_timer_sysc, +}; + +/* wd_timer2 */ +static struct omap_hwmod omap44xx_wd_timer2_hwmod; +static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = { + { .irq = 80 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = { + { + .pa_start = 0x4a314000, + .pa_end = 0x4a31407f, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_class omap44xx_uart_hwmod_class = { + .name = "uart", + .sysc = &omap44xx_uart_sysc, +}; + +/* uart1 */ +static struct omap_hwmod omap44xx_uart1_hwmod; +static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = { + { .irq = 72 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = { + { .name = "tx", .dma_req = 48 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 49 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = { + { + .pa_start = 0x4806a000, + .pa_end = 0x4806a0ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> uart1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart1_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_uart1_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* uart1 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = { + &omap44xx_l4_per__uart1, +}; + +static struct omap_hwmod omap44xx_uart1_hwmod = { + .name = "uart1", + .class = &omap44xx_uart_hwmod_class, + .mpu_irqs = omap44xx_uart1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart1_irqs), + .sdma_reqs = omap44xx_uart1_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart1_sdma_reqs), + .main_clk = "uart1_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL, + }, + }, + .slaves = omap44xx_uart1_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* uart2 */ +static struct omap_hwmod omap44xx_uart2_hwmod; +static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = { + { .irq = 73 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = { + { .name = "tx", .dma_req = 50 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 51 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = { + { + .pa_start = 0x4806c000, + .pa_end = 0x4806c0ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_wd_timer2_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_wd_timer2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_wd_timer2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* wd_timer2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = { + &omap44xx_l4_wkup__wd_timer2, +}; + +static struct omap_hwmod omap44xx_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap44xx_wd_timer_hwmod_class, + .mpu_irqs = omap44xx_wd_timer2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_wd_timer2_irqs), + .main_clk = "wd_timer2_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL, + }, + }, + .slaves = omap44xx_wd_timer2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* wd_timer3 */ +static struct omap_hwmod omap44xx_wd_timer3_hwmod; +static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = { + { .irq = 36 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = { + { + .pa_start = 0x40130000, + .pa_end = 0x4013007f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> uart2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart2_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_uart2_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* uart2 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = { + &omap44xx_l4_per__uart2, +}; + +static struct omap_hwmod omap44xx_uart2_hwmod = { + .name = "uart2", + .class = &omap44xx_uart_hwmod_class, + .mpu_irqs = omap44xx_uart2_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart2_irqs), + .sdma_reqs = omap44xx_uart2_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart2_sdma_reqs), + .main_clk = "uart2_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL, + }, + }, + .slaves = omap44xx_uart2_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* uart3 */ +static struct omap_hwmod omap44xx_uart3_hwmod; +static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = { + { .irq = 74 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = { + { .name = "tx", .dma_req = 52 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 53 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = { + { + .pa_start = 0x48020000, + .pa_end = 0x480200ff, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_abe -> wd_timer3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_wd_timer3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_wd_timer3_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_wd_timer3_addrs), + .user = OCP_USER_MPU, +}; + +/* l4_abe -> wd_timer3 (dma) */ +static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = { + { + .pa_start = 0x49030000, + .pa_end = 0x4903007f, + .flags = ADDR_TYPE_RT + }, +}; + +/* l4_per -> uart3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart3_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_uart3_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* uart3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = { + &omap44xx_l4_per__uart3, +}; + +static struct omap_hwmod omap44xx_uart3_hwmod = { + .name = "uart3", + .class = &omap44xx_uart_hwmod_class, + .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .mpu_irqs = omap44xx_uart3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart3_irqs), + .sdma_reqs = omap44xx_uart3_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart3_sdma_reqs), + .main_clk = "uart3_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL, + }, + }, + .slaves = omap44xx_uart3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* uart4 */ +static struct omap_hwmod omap44xx_uart4_hwmod; +static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = { + { .irq = 70 + OMAP44XX_IRQ_GIC_START }, +}; + +static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = { + { .name = "tx", .dma_req = 54 + OMAP44XX_DMA_REQ_START }, + { .name = "rx", .dma_req = 55 + OMAP44XX_DMA_REQ_START }, +}; + +static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = { + { + .pa_start = 0x4806e000, + .pa_end = 0x4806e0ff, + .flags = ADDR_TYPE_RT + }, +}; + +static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_wd_timer3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_wd_timer3_dma_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_wd_timer3_dma_addrs), + .user = OCP_USER_SDMA, +}; + +/* wd_timer3 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = { + &omap44xx_l4_abe__wd_timer3, + &omap44xx_l4_abe__wd_timer3_dma, +}; + +static struct omap_hwmod omap44xx_wd_timer3_hwmod = { + .name = "wd_timer3", + .class = &omap44xx_wd_timer_hwmod_class, + .mpu_irqs = omap44xx_wd_timer3_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_wd_timer3_irqs), + .main_clk = "wd_timer3_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL, + }, + }, + .slaves = omap44xx_wd_timer3_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +/* l4_per -> uart4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart4_addrs, + .addr_cnt = ARRAY_SIZE(omap44xx_uart4_addrs), + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* uart4 slave ports */ +static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = { + &omap44xx_l4_per__uart4, +}; + +static struct omap_hwmod omap44xx_uart4_hwmod = { + .name = "uart4", + .class = &omap44xx_uart_hwmod_class, + .mpu_irqs = omap44xx_uart4_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart4_irqs), + .sdma_reqs = omap44xx_uart4_sdma_reqs, + .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart4_sdma_reqs), + .main_clk = "uart4_fck", + .prcm = { + .omap4 = { + .clkctrl_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL, + }, + }, + .slaves = omap44xx_uart4_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + +static __initdata struct omap_hwmod *omap44xx_hwmods[] = { + /* dmm class */ + &omap44xx_dmm_hwmod, + /* emif_fw class */ + &omap44xx_emif_fw_hwmod, + /* l3 class */ + &omap44xx_l3_instr_hwmod, + &omap44xx_l3_main_1_hwmod, + &omap44xx_l3_main_2_hwmod, + &omap44xx_l3_main_3_hwmod, + /* l4 class */ + &omap44xx_l4_abe_hwmod, + &omap44xx_l4_cfg_hwmod, + &omap44xx_l4_per_hwmod, + &omap44xx_l4_wkup_hwmod, + /* mpu_bus class */ + &omap44xx_mpu_private_hwmod, + + /* mpu class */ + &omap44xx_mpu_hwmod, + /* wd_timer class */ + &omap44xx_wd_timer2_hwmod, + &omap44xx_wd_timer3_hwmod, + + /* uart class */ + &omap44xx_uart1_hwmod, + &omap44xx_uart2_hwmod, + &omap44xx_uart3_hwmod, + &omap44xx_uart4_hwmod, + NULL, +}; + +int __init omap44xx_hwmod_init(void) +{ + return omap_hwmod_init(omap44xx_hwmods); +} + diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 723b44e252fd..5e81517a7af2 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -31,12 +31,17 @@ #include <plat/board.h> #include <plat/powerdomain.h> #include <plat/clockdomain.h> +#include <plat/dmtimer.h> #include "prm.h" #include "cm.h" #include "pm.h" int omap2_pm_debug; +u32 enable_off_mode; +u32 sleep_while_idle; +u32 wakeup_timer_seconds; +u32 wakeup_timer_milliseconds; #define DUMP_PRM_MOD_REG(mod, reg) \ regs[reg_count].name = #mod "." #reg; \ @@ -162,7 +167,7 @@ void omap2_pm_dump(int mode, int resume, unsigned int us) static void pm_dbg_regset_store(u32 *ptr); -struct dentry *pm_dbg_dir; +static struct dentry *pm_dbg_dir; static int pm_dbg_init_done; @@ -349,6 +354,23 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) pwrdm->timer = t; } +void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) +{ + u32 tick_rate, cycles; + + if (!seconds && !milliseconds) + return; + + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); + cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; + omap_dm_timer_stop(gptimer_wakeup); + omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); + + pr_info("PM: Resume timer in %u.%03u secs" + " (%d ticks at %d ticks/sec.)\n", + seconds, milliseconds, cycles, tick_rate); +} + static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user) { struct seq_file *s = (struct seq_file *)user; @@ -494,8 +516,10 @@ int pm_dbg_regset_init(int reg_set) static int pwrdm_suspend_get(void *data, u64 *val) { - int ret; - ret = omap3_pm_get_suspend_state((struct powerdomain *)data); + int ret = -EINVAL; + + if (cpu_is_omap34xx()) + ret = omap3_pm_get_suspend_state((struct powerdomain *)data); *val = ret; if (ret >= 0) @@ -505,7 +529,10 @@ static int pwrdm_suspend_get(void *data, u64 *val) static int pwrdm_suspend_set(void *data, u64 val) { - return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val); + if (cpu_is_omap34xx()) + return omap3_pm_set_suspend_state( + (struct powerdomain *)data, (int)val); + return -EINVAL; } DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get, @@ -553,8 +580,10 @@ static int option_set(void *data, u64 val) *option = val; - if (option == &enable_off_mode) - omap3_pm_off_mode_enable(val); + if (option == &enable_off_mode) { + if (cpu_is_omap34xx()) + omap3_pm_off_mode_enable(val); + } return 0; } @@ -609,6 +638,9 @@ static int __init pm_dbg_init(void) &sleep_while_idle, &pm_dbg_option_fops); (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d, &wakeup_timer_seconds, &pm_dbg_option_fops); + (void) debugfs_create_file("wakeup_timer_milliseconds", + S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds, + &pm_dbg_option_fops); pm_dbg_init_done = 1; return 0; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 68f9f2e95891..59ca03b0e691 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -18,11 +18,15 @@ #include <plat/omap_device.h> #include <plat/common.h> +#include <plat/powerdomain.h> +#include <plat/clockdomain.h> + static struct omap_device_pm_latency *pm_lats; static struct device *mpu_dev; -static struct device *dsp_dev; +static struct device *iva_dev; static struct device *l3_dev; +static struct device *dsp_dev; struct device *omap2_get_mpuss_device(void) { @@ -30,10 +34,10 @@ struct device *omap2_get_mpuss_device(void) return mpu_dev; } -struct device *omap2_get_dsp_device(void) +struct device *omap2_get_iva_device(void) { - WARN_ON_ONCE(!dsp_dev); - return dsp_dev; + WARN_ON_ONCE(!iva_dev); + return iva_dev; } struct device *omap2_get_l3_device(void) @@ -42,6 +46,13 @@ struct device *omap2_get_l3_device(void) return l3_dev; } +struct device *omap4_get_dsp_device(void) +{ + WARN_ON_ONCE(!dsp_dev); + return dsp_dev; +} +EXPORT_SYMBOL(omap4_get_dsp_device); + /* static int _init_omap_device(struct omap_hwmod *oh, void *user) */ static int _init_omap_device(char *name, struct device **new_dev) { @@ -69,8 +80,60 @@ static int _init_omap_device(char *name, struct device **new_dev) static void omap2_init_processor_devices(void) { _init_omap_device("mpu", &mpu_dev); - _init_omap_device("iva", &dsp_dev); - _init_omap_device("l3_main", &l3_dev); + _init_omap_device("iva", &iva_dev); + if (cpu_is_omap44xx()) { + _init_omap_device("l3_main_1", &l3_dev); + _init_omap_device("dsp", &dsp_dev); + } else { + _init_omap_device("l3_main", &l3_dev); + } +} + +/* + * This sets pwrdm state (other than mpu & core. Currently only ON & + * RET are supported. Function is assuming that clkdm doesn't have + * hw_sup mode enabled. + */ +int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) +{ + u32 cur_state; + int sleep_switch = 0; + int ret = 0; + + if (pwrdm == NULL || IS_ERR(pwrdm)) + return -EINVAL; + + while (!(pwrdm->pwrsts & (1 << state))) { + if (state == PWRDM_POWER_OFF) + return ret; + state--; + } + + cur_state = pwrdm_read_next_pwrst(pwrdm); + if (cur_state == state) + return ret; + + if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { + omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); + sleep_switch = 1; + pwrdm_wait_transition(pwrdm); + } + + ret = pwrdm_set_next_pwrst(pwrdm, state); + if (ret) { + printk(KERN_ERR "Unable to set state of powerdomain: %s\n", + pwrdm->name); + goto err; + } + + if (sleep_switch) { + omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); + pwrdm_wait_transition(pwrdm); + pwrdm_state_switch(pwrdm); + } + +err: + return ret; } static int __init omap2_common_pm_init(void) diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 3de6ece23fc8..0d75bfd1fdbe 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -13,14 +13,11 @@ #include <plat/powerdomain.h> -extern u32 enable_off_mode; -extern u32 sleep_while_idle; - extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap3_can_sleep(void); -extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state); +extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); extern int omap3_idle_init(void); struct cpuidle_params { @@ -48,10 +45,16 @@ extern struct omap_dm_timer *gptimer_wakeup; #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); +extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds); extern int omap2_pm_debug; +extern u32 enable_off_mode; +extern u32 sleep_while_idle; #else #define omap2_pm_dump(mode, resume, us) do {} while (0); +#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0); #define omap2_pm_debug 0 +#define enable_off_mode 0 +#define sleep_while_idle 0 #endif #if defined(CONFIG_CPU_IDLE) diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 6aeedeacdad8..a40457d81927 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -38,7 +38,6 @@ #include <mach/irqs.h> #include <plat/clock.h> #include <plat/sram.h> -#include <plat/control.h> #include <plat/dma.h> #include <plat/board.h> @@ -48,6 +47,7 @@ #include "cm-regbits-24xx.h" #include "sdrc.h" #include "pm.h" +#include "control.h" #include <plat/powerdomain.h> #include <plat/clockdomain.h> @@ -245,6 +245,8 @@ static int omap2_can_sleep(void) { if (omap2_fclks_active()) return 0; + if (!omap_uart_can_sleep()) + return 0; if (osc_ck->usecount > 1) return 0; if (omap_dma_running()) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7b03426c72a3..8c8f1acd3526 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -32,13 +32,11 @@ #include <plat/sram.h> #include <plat/clockdomain.h> #include <plat/powerdomain.h> -#include <plat/control.h> #include <plat/serial.h> #include <plat/sdrc.h> #include <plat/prcm.h> #include <plat/gpmc.h> #include <plat/dma.h> -#include <plat/dmtimer.h> #include <asm/tlbflush.h> @@ -49,17 +47,13 @@ #include "prm.h" #include "pm.h" #include "sdrc.h" +#include "control.h" /* Scratchpad offsets */ #define OMAP343X_TABLE_ADDRESS_OFFSET 0x31 #define OMAP343X_TABLE_VALUE_OFFSET 0x30 #define OMAP343X_CONTROL_REG_VALUE_OFFSET 0x32 -u32 enable_off_mode; -u32 sleep_while_idle; -u32 wakeup_timer_seconds; -u32 wakeup_timer_milliseconds; - struct power_state { struct powerdomain *pwrdm; u32 next_state; @@ -316,7 +310,7 @@ static void restore_control_register(u32 val) /* Function to restore the table entry that was modified for enabling MMU */ static void restore_table_entry(void) { - u32 *scratchpad_address; + void __iomem *scratchpad_address; u32 previous_value, control_reg_value; u32 *address; @@ -351,7 +345,6 @@ void omap_sram_idle(void) int core_next_state = PWRDM_POWER_ON; int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; - int per_state_modified = 0; if (!_omap_sram_idle) return; @@ -385,9 +378,9 @@ void omap_sram_idle(void) /* Enable IO-PAD and IO-CHAIN wakeups */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (omap3_has_io_wakeup() && \ - (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON)) { + if (omap3_has_io_wakeup() && + (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON)) { prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap3_enable_io_chain(); } @@ -395,20 +388,12 @@ void omap_sram_idle(void) /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); + omap_uart_prepare_idle(3); omap2_gpio_prepare_for_idle(per_next_state); - if (per_next_state == PWRDM_POWER_OFF) { - if (core_next_state == PWRDM_POWER_ON) { - per_next_state = PWRDM_POWER_RET; - pwrdm_set_next_pwrst(per_pwrdm, per_next_state); - per_state_modified = 1; - } else + if (per_next_state == PWRDM_POWER_OFF) omap3_per_save_context(); - } } - if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON) - omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]); - /* CORE */ if (core_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(0); @@ -475,8 +460,7 @@ void omap_sram_idle(void) if (per_prev_state == PWRDM_POWER_OFF) omap3_per_restore_context(); omap_uart_resume_idle(2); - if (per_state_modified) - pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); + omap_uart_resume_idle(3); } /* Disable IO-PAD and IO-CHAIN wakeup */ @@ -501,51 +485,6 @@ int omap3_can_sleep(void) return 1; } -/* This sets pwrdm state (other than mpu & core. Currently only ON & - * RET are supported. Function is assuming that clkdm doesn't have - * hw_sup mode enabled. */ -int set_pwrdm_state(struct powerdomain *pwrdm, u32 state) -{ - u32 cur_state; - int sleep_switch = 0; - int ret = 0; - - if (pwrdm == NULL || IS_ERR(pwrdm)) - return -EINVAL; - - while (!(pwrdm->pwrsts & (1 << state))) { - if (state == PWRDM_POWER_OFF) - return ret; - state--; - } - - cur_state = pwrdm_read_next_pwrst(pwrdm); - if (cur_state == state) - return ret; - - if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) { - omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - sleep_switch = 1; - pwrdm_wait_transition(pwrdm); - } - - ret = pwrdm_set_next_pwrst(pwrdm, state); - if (ret) { - printk(KERN_ERR "Unable to set state of powerdomain: %s\n", - pwrdm->name); - goto err; - } - - if (sleep_switch) { - omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); - pwrdm_state_switch(pwrdm); - } - -err: - return ret; -} - static void omap3_pm_idle(void) { local_irq_disable(); @@ -567,23 +506,6 @@ out: #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state; -static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) -{ - u32 tick_rate, cycles; - - if (!seconds && !milliseconds) - return; - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); - cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; - omap_dm_timer_stop(gptimer_wakeup); - omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); - - pr_info("PM: Resume timer in %u.%03u secs" - " (%d ticks at %d ticks/sec.)\n", - seconds, milliseconds, cycles, tick_rate); -} - static int omap3_pm_prepare(void) { disable_hlt(); @@ -604,7 +526,7 @@ static int omap3_pm_suspend(void) pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); /* Set ones wanted by suspend */ list_for_each_entry(pwrst, &pwrst_list, node) { - if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) + if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state)) goto restore; if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm)) goto restore; @@ -625,7 +547,7 @@ restore: pwrst->pwrdm->name, pwrst->next_state); ret = -1; } - set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); + omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) printk(KERN_ERR "Could not enter target state in pm_suspend\n"); @@ -756,6 +678,14 @@ static void __init omap3_d2d_idle(void) static void __init prcm_setup_regs(void) { + u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ? + OMAP3630_AUTO_UART4_MASK : 0; + u32 omap3630_en_uart4_mask = cpu_is_omap3630() ? + OMAP3630_EN_UART4_MASK : 0; + u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ? + OMAP3630_GRPSEL_UART4_MASK : 0; + + /* XXX Reset all wkdeps. This should be done when initializing * powerdomains */ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP); @@ -842,6 +772,7 @@ static void __init prcm_setup_regs(void) CM_AUTOIDLE); cm_write_mod_reg( + omap3630_auto_uart4_mask | OMAP3430_AUTO_GPIO6_MASK | OMAP3430_AUTO_GPIO5_MASK | OMAP3430_AUTO_GPIO4_MASK | @@ -918,14 +849,16 @@ static void __init prcm_setup_regs(void) OMAP3430_DSS_MOD, PM_WKEN); /* Enable wakeups in PER */ - prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK | + prm_write_mod_reg(omap3630_en_uart4_mask | + OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK | OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK | OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK | OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK | OMAP3430_EN_MCBSP4_MASK, OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ - prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK | + prm_write_mod_reg(omap3630_grpsel_uart4_mask | + OMAP3430_GRPSEL_GPIO2_MASK | OMAP3430_GRPSEL_GPIO3_MASK | OMAP3430_GRPSEL_GPIO4_MASK | OMAP3430_GRPSEL_GPIO5_MASK | @@ -974,7 +907,7 @@ void omap3_pm_off_mode_enable(int enable) list_for_each_entry(pwrst, &pwrst_list, node) { pwrst->next_state = state; - set_pwrdm_state(pwrst->pwrdm, state); + omap_set_pwrdm_state(pwrst->pwrdm, state); } } @@ -1019,7 +952,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) if (pwrdm_has_hdwr_sar(pwrdm)) pwrdm_enable_hdwr_sar(pwrdm); - return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); + return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); } /* @@ -1029,9 +962,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) */ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) { - clkdm_clear_all_wkdeps(clkdm); - clkdm_clear_all_sleepdeps(clkdm); - if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO) omap2_clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c new file mode 100644 index 000000000000..784989f8f2f5 --- /dev/null +++ b/arch/arm/mach-omap2/pm_bus.c @@ -0,0 +1,85 @@ +/* + * Runtime PM support code for OMAP + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Copyright (C) 2010 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> + +#include <plat/omap_device.h> +#include <plat/omap-pm.h> + +#ifdef CONFIG_PM_RUNTIME +int omap_pm_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + int r, ret = 0; + + dev_dbg(dev, "%s\n", __func__); + + ret = pm_generic_runtime_suspend(dev); + + if (!ret && dev->parent == &omap_device_parent) { + r = omap_device_idle(pdev); + WARN_ON(r); + } + + return ret; +}; + +int omap_pm_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + int r; + + dev_dbg(dev, "%s\n", __func__); + + if (dev->parent == &omap_device_parent) { + r = omap_device_enable(pdev); + WARN_ON(r); + } + + return pm_generic_runtime_resume(dev); +}; +#else +#define omap_pm_runtime_suspend NULL +#define omap_pm_runtime_resume NULL +#endif /* CONFIG_PM_RUNTIME */ + +static int __init omap_pm_runtime_init(void) +{ + const struct dev_pm_ops *pm; + struct dev_pm_ops *omap_pm; + + pm = platform_bus_get_pm_ops(); + if (!pm) { + pr_err("%s: unable to get dev_pm_ops from platform_bus\n", + __func__); + return -ENODEV; + } + + omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL); + if (!omap_pm) { + pr_err("%s: unable to alloc memory for new dev_pm_ops\n", + __func__); + return -ENOMEM; + } + + omap_pm->runtime_suspend = omap_pm_runtime_suspend; + omap_pm->runtime_resume = omap_pm_runtime_resume; + + platform_bus_set_pm_ops(omap_pm); + + return 0; +} +core_initcall(omap_pm_runtime_init); diff --git a/arch/arm/mach-omap2/powerdomains44xx.h b/arch/arm/mach-omap2/powerdomains44xx.h index c7219513472a..9c01b55d6102 100644 --- a/arch/arm/mach-omap2/powerdomains44xx.h +++ b/arch/arm/mach-omap2/powerdomains44xx.h @@ -98,7 +98,7 @@ static struct powerdomain dss_44xx_pwrdm = { .prcm_offs = OMAP4430_PRM_DSS_MOD, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, - .pwrsts_logic_ret = PWRSTS_OFF_RET, + .pwrsts_logic_ret = PWRSTS_OFF, .banks = 1, .pwrsts_mem_ret = { [0] = PWRDM_POWER_OFF, /* dss_mem */ diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 995b7edbf18d..298a22a754e2 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -382,6 +382,9 @@ #define OMAP3430_EN_MPU_SHIFT 1 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */ + +#define OMAP3630_EN_UART4_MASK (1 << 18) +#define OMAP3630_EN_UART4_SHIFT 18 #define OMAP3430_EN_GPIO6_MASK (1 << 17) #define OMAP3430_EN_GPIO6_SHIFT 17 #define OMAP3430_EN_GPIO5_MASK (1 << 16) @@ -422,6 +425,8 @@ #define OMAP3430_EN_MCBSP2_SHIFT 0 /* CM_IDLEST_PER, PM_WKST_PER shared bits */ +#define OMAP3630_ST_UART4_SHIFT 18 +#define OMAP3630_ST_UART4_MASK (1 << 18) #define OMAP3430_ST_GPIO6_SHIFT 17 #define OMAP3430_ST_GPIO6_MASK (1 << 17) #define OMAP3430_ST_GPIO5_SHIFT 16 diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index c20137497c92..a51846e3a6fa 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -26,13 +26,14 @@ #include <plat/common.h> #include <plat/prcm.h> #include <plat/irqs.h> -#include <plat/control.h> #include "clock.h" #include "clock2xxx.h" #include "cm.h" #include "prm.h" #include "prm-regbits-24xx.h" +#include "prm-regbits-44xx.h" +#include "control.h" static void __iomem *prm_base; static void __iomem *cm_base; @@ -118,7 +119,7 @@ struct omap3_prcm_regs { u32 wkup_pm_wken; }; -struct omap3_prcm_regs prcm_context; +static struct omap3_prcm_regs prcm_context; u32 omap_prcm_get_reset_sources(void) { @@ -161,8 +162,8 @@ void omap_prcm_arch_reset(char mode, const char *cmd) prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, OMAP2_RM_RSTCTRL); if (cpu_is_omap44xx()) - prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, - OMAP4_RM_RSTCTRL); + prm_set_mod_reg_bits(OMAP4430_RST_GLOBAL_WARM_SW_MASK, + prcm_offs, OMAP4_RM_RSTCTRL); } static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg) @@ -215,6 +216,30 @@ u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) return v; } +/* Read a PRM register, AND it, and shift the result down to bit 0 */ +u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask) +{ + u32 v; + + v = __raw_readl(reg); + v &= mask; + v >>= __ffs(mask); + + return v; +} + +/* Read-modify-write a register in a PRM module. Caller must lock */ +u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg) +{ + u32 v; + + v = __raw_readl(reg); + v &= ~mask; + v |= bits; + __raw_writel(v, reg); + + return v; +} /* Read a register in a CM module */ u32 cm_read_mod_reg(s16 module, u16 idx) { diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index 7fd6023edf96..9e63cb743a97 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -122,6 +122,7 @@ #define OMAP3430_MEMRETSTATE_MASK (1 << 8) /* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */ +#define OMAP3630_GRPSEL_UART4_MASK (1 << 18) #define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17) #define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16) #define OMAP3430_GRPSEL_GPIO4_MASK (1 << 15) diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h index 597be4a2b9ff..25b19b610177 100644 --- a/arch/arm/mach-omap2/prm-regbits-44xx.h +++ b/arch/arm/mach-omap2/prm-regbits-44xx.h @@ -1,8 +1,8 @@ /* * OMAP44xx Power Management register bits * - * Copyright (C) 2009 Texas Instruments, Inc. - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) * Rajendra Nayak (rnayak@ti.com) @@ -30,587 +30,611 @@ * PRM_LDO_SRAM_MPU_SETUP */ #define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT 1 -#define OMAP4430_ABBOFF_ACT_EXPORT_MASK BITFIELD(1, 1) +#define OMAP4430_ABBOFF_ACT_EXPORT_MASK (1 << 1) /* * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, * PRM_LDO_SRAM_MPU_SETUP */ #define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT 2 -#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK BITFIELD(2, 2) +#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK (1 << 2) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_ABB_IVA_DONE_EN_SHIFT 31 -#define OMAP4430_ABB_IVA_DONE_EN_MASK BITFIELD(31, 31) +#define OMAP4430_ABB_IVA_DONE_EN_MASK (1 << 31) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_ABB_IVA_DONE_ST_SHIFT 31 -#define OMAP4430_ABB_IVA_DONE_ST_MASK BITFIELD(31, 31) +#define OMAP4430_ABB_IVA_DONE_ST_MASK (1 << 31) /* Used by PRM_IRQENABLE_MPU_2 */ #define OMAP4430_ABB_MPU_DONE_EN_SHIFT 7 -#define OMAP4430_ABB_MPU_DONE_EN_MASK BITFIELD(7, 7) +#define OMAP4430_ABB_MPU_DONE_EN_MASK (1 << 7) /* Used by PRM_IRQSTATUS_MPU_2 */ #define OMAP4430_ABB_MPU_DONE_ST_SHIFT 7 -#define OMAP4430_ABB_MPU_DONE_ST_MASK BITFIELD(7, 7) +#define OMAP4430_ABB_MPU_DONE_ST_MASK (1 << 7) /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ #define OMAP4430_ACTIVE_FBB_SEL_SHIFT 2 -#define OMAP4430_ACTIVE_FBB_SEL_MASK BITFIELD(2, 2) +#define OMAP4430_ACTIVE_FBB_SEL_MASK (1 << 2) /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ #define OMAP4430_ACTIVE_RBB_SEL_SHIFT 1 -#define OMAP4430_ACTIVE_RBB_SEL_MASK BITFIELD(1, 1) +#define OMAP4430_ACTIVE_RBB_SEL_MASK (1 << 1) /* Used by PM_ABE_PWRSTCTRL */ #define OMAP4430_AESSMEM_ONSTATE_SHIFT 16 -#define OMAP4430_AESSMEM_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_AESSMEM_ONSTATE_MASK (0x3 << 16) /* Used by PM_ABE_PWRSTCTRL */ #define OMAP4430_AESSMEM_RETSTATE_SHIFT 8 -#define OMAP4430_AESSMEM_RETSTATE_MASK BITFIELD(8, 8) +#define OMAP4430_AESSMEM_RETSTATE_MASK (1 << 8) /* Used by PM_ABE_PWRSTST */ #define OMAP4430_AESSMEM_STATEST_SHIFT 4 -#define OMAP4430_AESSMEM_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_AESSMEM_STATEST_MASK (0x3 << 4) /* * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, * PRM_LDO_SRAM_MPU_SETUP */ #define OMAP4430_AIPOFF_SHIFT 8 -#define OMAP4430_AIPOFF_MASK BITFIELD(8, 8) +#define OMAP4430_AIPOFF_MASK (1 << 8) /* Used by PRM_VOLTCTRL */ #define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT 0 -#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK BITFIELD(0, 1) +#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK (0x3 << 0) /* Used by PRM_VOLTCTRL */ #define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT 4 -#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK BITFIELD(4, 5) +#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK (0x3 << 4) /* Used by PRM_VOLTCTRL */ #define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT 2 -#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK BITFIELD(2, 3) +#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK (0x3 << 2) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_BYPS_RA_ERR_SHIFT 25 +#define OMAP4430_BYPS_RA_ERR_MASK (1 << 25) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_BYPS_SA_ERR_SHIFT 24 +#define OMAP4430_BYPS_SA_ERR_MASK (1 << 24) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_BYPS_TIMEOUT_ERR_SHIFT 26 +#define OMAP4430_BYPS_TIMEOUT_ERR_MASK (1 << 26) + +/* Used by PRM_RSTST */ +#define OMAP4430_C2C_RST_SHIFT 10 +#define OMAP4430_C2C_RST_MASK (1 << 10) /* Used by PM_CAM_PWRSTCTRL */ #define OMAP4430_CAM_MEM_ONSTATE_SHIFT 16 -#define OMAP4430_CAM_MEM_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_CAM_MEM_ONSTATE_MASK (0x3 << 16) /* Used by PM_CAM_PWRSTST */ #define OMAP4430_CAM_MEM_STATEST_SHIFT 4 -#define OMAP4430_CAM_MEM_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_CAM_MEM_STATEST_MASK (0x3 << 4) /* Used by PRM_CLKREQCTRL */ #define OMAP4430_CLKREQ_COND_SHIFT 0 -#define OMAP4430_CLKREQ_COND_MASK BITFIELD(0, 2) +#define OMAP4430_CLKREQ_COND_MASK (0x7 << 0) /* Used by PRM_VC_VAL_SMPS_RA_CMD */ #define OMAP4430_CMDRA_VDD_CORE_L_SHIFT 0 -#define OMAP4430_CMDRA_VDD_CORE_L_MASK BITFIELD(0, 7) +#define OMAP4430_CMDRA_VDD_CORE_L_MASK (0xff << 0) /* Used by PRM_VC_VAL_SMPS_RA_CMD */ #define OMAP4430_CMDRA_VDD_IVA_L_SHIFT 8 -#define OMAP4430_CMDRA_VDD_IVA_L_MASK BITFIELD(8, 15) +#define OMAP4430_CMDRA_VDD_IVA_L_MASK (0xff << 8) /* Used by PRM_VC_VAL_SMPS_RA_CMD */ #define OMAP4430_CMDRA_VDD_MPU_L_SHIFT 16 -#define OMAP4430_CMDRA_VDD_MPU_L_MASK BITFIELD(16, 23) +#define OMAP4430_CMDRA_VDD_MPU_L_MASK (0xff << 16) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_CMD_VDD_CORE_L_SHIFT 4 -#define OMAP4430_CMD_VDD_CORE_L_MASK BITFIELD(4, 4) +#define OMAP4430_CMD_VDD_CORE_L_MASK (1 << 4) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_CMD_VDD_IVA_L_SHIFT 12 -#define OMAP4430_CMD_VDD_IVA_L_MASK BITFIELD(12, 12) +#define OMAP4430_CMD_VDD_IVA_L_MASK (1 << 12) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_CMD_VDD_MPU_L_SHIFT 17 -#define OMAP4430_CMD_VDD_MPU_L_MASK BITFIELD(17, 17) +#define OMAP4430_CMD_VDD_MPU_L_MASK (1 << 17) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT 18 -#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK BITFIELD(18, 19) +#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK (0x3 << 18) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT 9 -#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK BITFIELD(9, 9) +#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK (1 << 9) /* Used by PM_CORE_PWRSTST */ #define OMAP4430_CORE_OCMRAM_STATEST_SHIFT 6 -#define OMAP4430_CORE_OCMRAM_STATEST_MASK BITFIELD(6, 7) +#define OMAP4430_CORE_OCMRAM_STATEST_MASK (0x3 << 6) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT 16 -#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK (0x3 << 16) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT 8 -#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK BITFIELD(8, 8) +#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK (1 << 8) /* Used by PM_CORE_PWRSTST */ #define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT 4 -#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK (0x3 << 4) + +/* Used by REVISION_PRM */ +#define OMAP4430_CUSTOM_SHIFT 6 +#define OMAP4430_CUSTOM_MASK (0x3 << 6) /* Used by PRM_VC_VAL_BYPASS */ #define OMAP4430_DATA_SHIFT 16 -#define OMAP4430_DATA_MASK BITFIELD(16, 23) +#define OMAP4430_DATA_MASK (0xff << 16) /* Used by PRM_DEVICE_OFF_CTRL */ #define OMAP4430_DEVICE_OFF_ENABLE_SHIFT 0 -#define OMAP4430_DEVICE_OFF_ENABLE_MASK BITFIELD(0, 0) +#define OMAP4430_DEVICE_OFF_ENABLE_MASK (1 << 0) /* Used by PRM_VC_CFG_I2C_MODE */ #define OMAP4430_DFILTEREN_SHIFT 6 -#define OMAP4430_DFILTEREN_MASK BITFIELD(6, 6) +#define OMAP4430_DFILTEREN_MASK (1 << 6) -/* Used by PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */ +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP + */ +#define OMAP4430_DISABLE_RTA_EXPORT_SHIFT 0 +#define OMAP4430_DISABLE_RTA_EXPORT_MASK (1 << 0) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */ #define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT 4 -#define OMAP4430_DPLL_ABE_RECAL_EN_MASK BITFIELD(4, 4) +#define OMAP4430_DPLL_ABE_RECAL_EN_MASK (1 << 4) -/* Used by PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */ +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */ #define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT 4 -#define OMAP4430_DPLL_ABE_RECAL_ST_MASK BITFIELD(4, 4) +#define OMAP4430_DPLL_ABE_RECAL_ST_MASK (1 << 4) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT 0 -#define OMAP4430_DPLL_CORE_RECAL_EN_MASK BITFIELD(0, 0) +#define OMAP4430_DPLL_CORE_RECAL_EN_MASK (1 << 0) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT 0 -#define OMAP4430_DPLL_CORE_RECAL_ST_MASK BITFIELD(0, 0) +#define OMAP4430_DPLL_CORE_RECAL_ST_MASK (1 << 0) /* Used by PRM_IRQENABLE_MPU */ #define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT 6 -#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK BITFIELD(6, 6) +#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK (1 << 6) /* Used by PRM_IRQSTATUS_MPU */ #define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT 6 -#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK BITFIELD(6, 6) +#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK (1 << 6) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */ #define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT 2 -#define OMAP4430_DPLL_IVA_RECAL_EN_MASK BITFIELD(2, 2) +#define OMAP4430_DPLL_IVA_RECAL_EN_MASK (1 << 2) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */ #define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT 2 -#define OMAP4430_DPLL_IVA_RECAL_ST_MASK BITFIELD(2, 2) +#define OMAP4430_DPLL_IVA_RECAL_ST_MASK (1 << 2) /* Used by PRM_IRQENABLE_MPU */ #define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT 1 -#define OMAP4430_DPLL_MPU_RECAL_EN_MASK BITFIELD(1, 1) +#define OMAP4430_DPLL_MPU_RECAL_EN_MASK (1 << 1) /* Used by PRM_IRQSTATUS_MPU */ #define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT 1 -#define OMAP4430_DPLL_MPU_RECAL_ST_MASK BITFIELD(1, 1) +#define OMAP4430_DPLL_MPU_RECAL_ST_MASK (1 << 1) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_DPLL_PER_RECAL_EN_SHIFT 3 -#define OMAP4430_DPLL_PER_RECAL_EN_MASK BITFIELD(3, 3) +#define OMAP4430_DPLL_PER_RECAL_EN_MASK (1 << 3) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_DPLL_PER_RECAL_ST_SHIFT 3 -#define OMAP4430_DPLL_PER_RECAL_ST_MASK BITFIELD(3, 3) +#define OMAP4430_DPLL_PER_RECAL_ST_MASK (1 << 3) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT 7 -#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK BITFIELD(7, 7) +#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK (1 << 7) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT 7 -#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK BITFIELD(7, 7) - -/* Used by PRM_IRQENABLE_MPU */ -#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT 5 -#define OMAP4430_DPLL_USB_RECAL_EN_MASK BITFIELD(5, 5) - -/* Used by PRM_IRQSTATUS_MPU */ -#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT 5 -#define OMAP4430_DPLL_USB_RECAL_ST_MASK BITFIELD(5, 5) +#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK (1 << 7) /* Used by PM_DSS_PWRSTCTRL */ #define OMAP4430_DSS_MEM_ONSTATE_SHIFT 16 -#define OMAP4430_DSS_MEM_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_DSS_MEM_ONSTATE_MASK (0x3 << 16) /* Used by PM_DSS_PWRSTCTRL */ #define OMAP4430_DSS_MEM_RETSTATE_SHIFT 8 -#define OMAP4430_DSS_MEM_RETSTATE_MASK BITFIELD(8, 8) +#define OMAP4430_DSS_MEM_RETSTATE_MASK (1 << 8) /* Used by PM_DSS_PWRSTST */ #define OMAP4430_DSS_MEM_STATEST_SHIFT 4 -#define OMAP4430_DSS_MEM_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_DSS_MEM_STATEST_MASK (0x3 << 4) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT 20 -#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK BITFIELD(20, 21) +#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK (0x3 << 20) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT 10 -#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK BITFIELD(10, 10) +#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK (1 << 10) /* Used by PM_CORE_PWRSTST */ #define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT 8 -#define OMAP4430_DUCATI_L2RAM_STATEST_MASK BITFIELD(8, 9) +#define OMAP4430_DUCATI_L2RAM_STATEST_MASK (0x3 << 8) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT 22 -#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK BITFIELD(22, 23) +#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK (0x3 << 22) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT 11 -#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK BITFIELD(11, 11) +#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK (1 << 11) /* Used by PM_CORE_PWRSTST */ #define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT 10 -#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK BITFIELD(10, 11) +#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK (0x3 << 10) /* Used by RM_MPU_RSTST */ #define OMAP4430_EMULATION_RST_SHIFT 0 -#define OMAP4430_EMULATION_RST_MASK BITFIELD(0, 0) +#define OMAP4430_EMULATION_RST_MASK (1 << 0) /* Used by RM_DUCATI_RSTST */ #define OMAP4430_EMULATION_RST1ST_SHIFT 3 -#define OMAP4430_EMULATION_RST1ST_MASK BITFIELD(3, 3) +#define OMAP4430_EMULATION_RST1ST_MASK (1 << 3) /* Used by RM_DUCATI_RSTST */ #define OMAP4430_EMULATION_RST2ST_SHIFT 4 -#define OMAP4430_EMULATION_RST2ST_MASK BITFIELD(4, 4) +#define OMAP4430_EMULATION_RST2ST_MASK (1 << 4) /* Used by RM_IVAHD_RSTST */ #define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT 3 -#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK BITFIELD(3, 3) +#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK (1 << 3) /* Used by RM_IVAHD_RSTST */ #define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT 4 -#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK BITFIELD(4, 4) +#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK (1 << 4) /* Used by PM_EMU_PWRSTCTRL */ #define OMAP4430_EMU_BANK_ONSTATE_SHIFT 16 -#define OMAP4430_EMU_BANK_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_EMU_BANK_ONSTATE_MASK (0x3 << 16) /* Used by PM_EMU_PWRSTST */ #define OMAP4430_EMU_BANK_STATEST_SHIFT 4 -#define OMAP4430_EMU_BANK_STATEST_MASK BITFIELD(4, 5) - -/* - * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, - * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP - */ -#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT 0 -#define OMAP4430_ENABLE_RTA_EXPORT_MASK BITFIELD(0, 0) +#define OMAP4430_EMU_BANK_STATEST_MASK (0x3 << 4) /* * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, * PRM_LDO_SRAM_MPU_SETUP */ -#define OMAP4430_ENFUNC1_SHIFT 3 -#define OMAP4430_ENFUNC1_MASK BITFIELD(3, 3) +#define OMAP4430_ENFUNC1_EXPORT_SHIFT 3 +#define OMAP4430_ENFUNC1_EXPORT_MASK (1 << 3) /* * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, * PRM_LDO_SRAM_MPU_SETUP */ -#define OMAP4430_ENFUNC3_SHIFT 5 -#define OMAP4430_ENFUNC3_MASK BITFIELD(5, 5) +#define OMAP4430_ENFUNC3_EXPORT_SHIFT 5 +#define OMAP4430_ENFUNC3_EXPORT_MASK (1 << 5) /* * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, * PRM_LDO_SRAM_MPU_SETUP */ #define OMAP4430_ENFUNC4_SHIFT 6 -#define OMAP4430_ENFUNC4_MASK BITFIELD(6, 6) +#define OMAP4430_ENFUNC4_MASK (1 << 6) /* * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, * PRM_LDO_SRAM_MPU_SETUP */ #define OMAP4430_ENFUNC5_SHIFT 7 -#define OMAP4430_ENFUNC5_MASK BITFIELD(7, 7) +#define OMAP4430_ENFUNC5_MASK (1 << 7) /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ #define OMAP4430_ERRORGAIN_SHIFT 16 -#define OMAP4430_ERRORGAIN_MASK BITFIELD(16, 23) +#define OMAP4430_ERRORGAIN_MASK (0xff << 16) /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ #define OMAP4430_ERROROFFSET_SHIFT 24 -#define OMAP4430_ERROROFFSET_MASK BITFIELD(24, 31) +#define OMAP4430_ERROROFFSET_MASK (0xff << 24) /* Used by PRM_RSTST */ #define OMAP4430_EXTERNAL_WARM_RST_SHIFT 5 -#define OMAP4430_EXTERNAL_WARM_RST_MASK BITFIELD(5, 5) +#define OMAP4430_EXTERNAL_WARM_RST_MASK (1 << 5) /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ #define OMAP4430_FORCEUPDATE_SHIFT 1 -#define OMAP4430_FORCEUPDATE_MASK BITFIELD(1, 1) +#define OMAP4430_FORCEUPDATE_MASK (1 << 1) /* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */ #define OMAP4430_FORCEUPDATEWAIT_SHIFT 8 -#define OMAP4430_FORCEUPDATEWAIT_MASK BITFIELD(8, 31) +#define OMAP4430_FORCEUPDATEWAIT_MASK (0xffffff << 8) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */ #define OMAP4430_FORCEWKUP_EN_SHIFT 10 -#define OMAP4430_FORCEWKUP_EN_MASK BITFIELD(10, 10) +#define OMAP4430_FORCEWKUP_EN_MASK (1 << 10) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */ #define OMAP4430_FORCEWKUP_ST_SHIFT 10 -#define OMAP4430_FORCEWKUP_ST_MASK BITFIELD(10, 10) +#define OMAP4430_FORCEWKUP_ST_MASK (1 << 10) + +/* Used by REVISION_PRM */ +#define OMAP4430_FUNC_SHIFT 16 +#define OMAP4430_FUNC_MASK (0xfff << 16) /* Used by PM_GFX_PWRSTCTRL */ #define OMAP4430_GFX_MEM_ONSTATE_SHIFT 16 -#define OMAP4430_GFX_MEM_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_GFX_MEM_ONSTATE_MASK (0x3 << 16) /* Used by PM_GFX_PWRSTST */ #define OMAP4430_GFX_MEM_STATEST_SHIFT 4 -#define OMAP4430_GFX_MEM_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_GFX_MEM_STATEST_MASK (0x3 << 4) /* Used by PRM_RSTST */ #define OMAP4430_GLOBAL_COLD_RST_SHIFT 0 -#define OMAP4430_GLOBAL_COLD_RST_MASK BITFIELD(0, 0) +#define OMAP4430_GLOBAL_COLD_RST_MASK (1 << 0) /* Used by PRM_RSTST */ #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1 -#define OMAP4430_GLOBAL_WARM_SW_RST_MASK BITFIELD(1, 1) +#define OMAP4430_GLOBAL_WARM_SW_RST_MASK (1 << 1) /* Used by PRM_IO_PMCTRL */ #define OMAP4430_GLOBAL_WUEN_SHIFT 16 -#define OMAP4430_GLOBAL_WUEN_MASK BITFIELD(16, 16) +#define OMAP4430_GLOBAL_WUEN_MASK (1 << 16) /* Used by PRM_VC_CFG_I2C_MODE */ #define OMAP4430_HSMCODE_SHIFT 0 -#define OMAP4430_HSMCODE_MASK BITFIELD(0, 2) +#define OMAP4430_HSMCODE_MASK (0x7 << 0) /* Used by PRM_VC_CFG_I2C_MODE */ #define OMAP4430_HSMODEEN_SHIFT 3 -#define OMAP4430_HSMODEEN_MASK BITFIELD(3, 3) +#define OMAP4430_HSMODEEN_MASK (1 << 3) /* Used by PRM_VC_CFG_I2C_CLK */ #define OMAP4430_HSSCLH_SHIFT 16 -#define OMAP4430_HSSCLH_MASK BITFIELD(16, 23) +#define OMAP4430_HSSCLH_MASK (0xff << 16) /* Used by PRM_VC_CFG_I2C_CLK */ #define OMAP4430_HSSCLL_SHIFT 24 -#define OMAP4430_HSSCLL_MASK BITFIELD(24, 31) +#define OMAP4430_HSSCLL_MASK (0xff << 24) /* Used by PM_IVAHD_PWRSTCTRL */ #define OMAP4430_HWA_MEM_ONSTATE_SHIFT 16 -#define OMAP4430_HWA_MEM_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_HWA_MEM_ONSTATE_MASK (0x3 << 16) /* Used by PM_IVAHD_PWRSTCTRL */ #define OMAP4430_HWA_MEM_RETSTATE_SHIFT 8 -#define OMAP4430_HWA_MEM_RETSTATE_MASK BITFIELD(8, 8) +#define OMAP4430_HWA_MEM_RETSTATE_MASK (1 << 8) /* Used by PM_IVAHD_PWRSTST */ #define OMAP4430_HWA_MEM_STATEST_SHIFT 4 -#define OMAP4430_HWA_MEM_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_HWA_MEM_STATEST_MASK (0x3 << 4) /* Used by RM_MPU_RSTST */ #define OMAP4430_ICECRUSHER_MPU_RST_SHIFT 1 -#define OMAP4430_ICECRUSHER_MPU_RST_MASK BITFIELD(1, 1) +#define OMAP4430_ICECRUSHER_MPU_RST_MASK (1 << 1) /* Used by RM_DUCATI_RSTST */ #define OMAP4430_ICECRUSHER_RST1ST_SHIFT 5 -#define OMAP4430_ICECRUSHER_RST1ST_MASK BITFIELD(5, 5) +#define OMAP4430_ICECRUSHER_RST1ST_MASK (1 << 5) /* Used by RM_DUCATI_RSTST */ #define OMAP4430_ICECRUSHER_RST2ST_SHIFT 6 -#define OMAP4430_ICECRUSHER_RST2ST_MASK BITFIELD(6, 6) +#define OMAP4430_ICECRUSHER_RST2ST_MASK (1 << 6) /* Used by RM_IVAHD_RSTST */ #define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT 5 -#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK BITFIELD(5, 5) +#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK (1 << 5) /* Used by RM_IVAHD_RSTST */ #define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT 6 -#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK BITFIELD(6, 6) +#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK (1 << 6) /* Used by PRM_RSTST */ #define OMAP4430_ICEPICK_RST_SHIFT 9 -#define OMAP4430_ICEPICK_RST_MASK BITFIELD(9, 9) +#define OMAP4430_ICEPICK_RST_MASK (1 << 9) /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ #define OMAP4430_INITVDD_SHIFT 2 -#define OMAP4430_INITVDD_MASK BITFIELD(2, 2) +#define OMAP4430_INITVDD_MASK (1 << 2) /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ #define OMAP4430_INITVOLTAGE_SHIFT 8 -#define OMAP4430_INITVOLTAGE_MASK BITFIELD(8, 15) +#define OMAP4430_INITVOLTAGE_MASK (0xff << 8) /* - * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, - * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, - * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST, + * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST, + * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST */ #define OMAP4430_INTRANSITION_SHIFT 20 -#define OMAP4430_INTRANSITION_MASK BITFIELD(20, 20) +#define OMAP4430_INTRANSITION_MASK (1 << 20) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_IO_EN_SHIFT 9 -#define OMAP4430_IO_EN_MASK BITFIELD(9, 9) +#define OMAP4430_IO_EN_MASK (1 << 9) /* Used by PRM_IO_PMCTRL */ #define OMAP4430_IO_ON_STATUS_SHIFT 5 -#define OMAP4430_IO_ON_STATUS_MASK BITFIELD(5, 5) +#define OMAP4430_IO_ON_STATUS_MASK (1 << 5) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_IO_ST_SHIFT 9 -#define OMAP4430_IO_ST_MASK BITFIELD(9, 9) +#define OMAP4430_IO_ST_MASK (1 << 9) /* Used by PRM_IO_PMCTRL */ #define OMAP4430_ISOCLK_OVERRIDE_SHIFT 0 -#define OMAP4430_ISOCLK_OVERRIDE_MASK BITFIELD(0, 0) +#define OMAP4430_ISOCLK_OVERRIDE_MASK (1 << 0) /* Used by PRM_IO_PMCTRL */ #define OMAP4430_ISOCLK_STATUS_SHIFT 1 -#define OMAP4430_ISOCLK_STATUS_MASK BITFIELD(1, 1) +#define OMAP4430_ISOCLK_STATUS_MASK (1 << 1) /* Used by PRM_IO_PMCTRL */ #define OMAP4430_ISOOVR_EXTEND_SHIFT 4 -#define OMAP4430_ISOOVR_EXTEND_MASK BITFIELD(4, 4) +#define OMAP4430_ISOOVR_EXTEND_MASK (1 << 4) /* Used by PRM_IO_COUNT */ #define OMAP4430_ISO_2_ON_TIME_SHIFT 0 -#define OMAP4430_ISO_2_ON_TIME_MASK BITFIELD(0, 7) +#define OMAP4430_ISO_2_ON_TIME_MASK (0xff << 0) /* Used by PM_L3INIT_PWRSTCTRL */ #define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT 16 -#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK (0x3 << 16) /* Used by PM_L3INIT_PWRSTCTRL */ #define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT 8 -#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK BITFIELD(8, 8) +#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK (1 << 8) /* Used by PM_L3INIT_PWRSTST */ #define OMAP4430_L3INIT_BANK1_STATEST_SHIFT 4 -#define OMAP4430_L3INIT_BANK1_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_L3INIT_BANK1_STATEST_MASK (0x3 << 4) + +/* + * Used by PM_ABE_PWRSTST, PM_CORE_PWRSTST, PM_IVAHD_PWRSTST, + * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST + */ +#define OMAP4430_LASTPOWERSTATEENTERED_SHIFT 24 +#define OMAP4430_LASTPOWERSTATEENTERED_MASK (0x3 << 24) /* - * Used by PM_CORE_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, - * PM_MPU_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, - * PM_IVAHD_PWRSTCTRL + * Used by PM_ABE_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, + * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL, + * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL */ #define OMAP4430_LOGICRETSTATE_SHIFT 2 -#define OMAP4430_LOGICRETSTATE_MASK BITFIELD(2, 2) +#define OMAP4430_LOGICRETSTATE_MASK (1 << 2) /* - * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, - * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, - * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST, + * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST, + * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST */ #define OMAP4430_LOGICSTATEST_SHIFT 2 -#define OMAP4430_LOGICSTATEST_MASK BITFIELD(2, 2) +#define OMAP4430_LOGICSTATEST_MASK (1 << 2) /* - * Used by RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT, - * RM_WKUP_L4WKUP_CONTEXT, RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT, - * RM_WKUP_SYNCTIMER_CONTEXT, RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT, - * RM_WKUP_USIM_CONTEXT, RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT, - * RM_EMU_DEBUGSS_CONTEXT, RM_D2D_SAD2D_CONTEXT, RM_D2D_SAD2D_FW_CONTEXT, - * RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT, - * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_OCP_WP1_CONTEXT, - * RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT, RM_L3_2_OCMC_RAM_CONTEXT, - * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT, RM_MEMIF_DLL_CONTEXT, - * RM_MEMIF_DLL_H_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, - * RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT, RM_L3INIT_CCPTX_CONTEXT, - * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, - * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT, - * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT, - * RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT, + * Used by RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT, * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT, * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT, * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT, - * RM_ABE_WDT3_CONTEXT, RM_GFX_GFX_CONTEXT, RM_MPU_MPU_CONTEXT, - * RM_CEFUSE_CEFUSE_CONTEXT, RM_ALWON_MDMINTC_CONTEXT, - * RM_ALWON_SR_CORE_CONTEXT, RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT, - * RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT, RM_L4PER_ADC_CONTEXT, - * RM_L4PER_DMTIMER10_CONTEXT, RM_L4PER_DMTIMER11_CONTEXT, - * RM_L4PER_DMTIMER2_CONTEXT, RM_L4PER_DMTIMER3_CONTEXT, - * RM_L4PER_DMTIMER4_CONTEXT, RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT, - * RM_L4PER_HDQ1W_CONTEXT, RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, - * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, - * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT, - * RM_L4PER_MCASP3_CONTEXT, RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, - * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, - * RM_L4PER_MGATE_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, - * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_MSPROHG_CONTEXT, - * RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT, - * RM_TESLA_TESLA_CONTEXT, RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT + * RM_ABE_WDT3_CONTEXT, RM_ALWON_MDMINTC_CONTEXT, RM_ALWON_SR_CORE_CONTEXT, + * RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT, RM_CAM_FDIF_CONTEXT, + * RM_CAM_ISS_CONTEXT, RM_CEFUSE_CEFUSE_CONTEXT, RM_D2D_SAD2D_CONTEXT, + * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT, + * RM_DUCATI_DUCATI_CONTEXT, RM_EMU_DEBUGSS_CONTEXT, RM_GFX_GFX_CONTEXT, + * RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT, RM_L3INIT_CCPTX_CONTEXT, + * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, + * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT, + * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT, + * RM_L3INSTR_L3_3_CONTEXT, RM_L3INSTR_L3_INSTR_CONTEXT, + * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT, + * RM_L3_2_OCMC_RAM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT, + * RM_L4PER_ADC_CONTEXT, RM_L4PER_DMTIMER10_CONTEXT, + * RM_L4PER_DMTIMER11_CONTEXT, RM_L4PER_DMTIMER2_CONTEXT, + * RM_L4PER_DMTIMER3_CONTEXT, RM_L4PER_DMTIMER4_CONTEXT, + * RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT, RM_L4PER_HDQ1W_CONTEXT, + * RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, RM_L4PER_I2C2_CONTEXT, + * RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, RM_L4PER_I2C5_CONTEXT, + * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT, RM_L4PER_MCASP3_CONTEXT, + * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, RM_L4PER_MCSPI2_CONTEXT, + * RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, RM_L4PER_MGATE_CONTEXT, + * RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, RM_L4PER_MMCSD5_CONTEXT, + * RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, + * RM_L4SEC_PKAEIP29_CONTEXT, RM_MEMIF_DLL_CONTEXT, RM_MEMIF_DLL_H_CONTEXT, + * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT, + * RM_MEMIF_EMIF_FW_CONTEXT, RM_MPU_MPU_CONTEXT, RM_TESLA_TESLA_CONTEXT, + * RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT, RM_WKUP_L4WKUP_CONTEXT, + * RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT, RM_WKUP_SYNCTIMER_CONTEXT, + * RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT, RM_WKUP_USIM_CONTEXT, + * RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT */ #define OMAP4430_LOSTCONTEXT_DFF_SHIFT 0 -#define OMAP4430_LOSTCONTEXT_DFF_MASK BITFIELD(0, 0) +#define OMAP4430_LOSTCONTEXT_DFF_MASK (1 << 0) /* * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT, - * RM_D2D_SAD2D_FW_CONTEXT, RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT, + * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DSS_CONTEXT, RM_DUCATI_DUCATI_CONTEXT, + * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, + * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_USB_HOST_CONTEXT, + * RM_L3INIT_USB_HOST_FS_CONTEXT, RM_L3INIT_USB_OTG_CONTEXT, + * RM_L3INIT_USB_TLL_CONTEXT, RM_L3INSTR_L3_3_CONTEXT, * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT, * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT, - * RM_L4CFG_MAILBOX_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, - * RM_MEMIF_EMIF_2_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT, - * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_L3INIT_HSI_CONTEXT, - * RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_MMC6_CONTEXT, - * RM_L3INIT_USB_HOST_CONTEXT, RM_L3INIT_USB_HOST_FS_CONTEXT, - * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_USB_TLL_CONTEXT, RM_DSS_DSS_CONTEXT, - * RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT, RM_L4PER_GPIO4_CONTEXT, - * RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT, RM_L4PER_I2C1_CONTEXT, - * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT, - * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4SEC_AES1_CONTEXT, - * RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, RM_L4SEC_DES3DES_CONTEXT, - * RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, RM_TESLA_TESLA_CONTEXT + * RM_L4CFG_MAILBOX_CONTEXT, RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT, + * RM_L4PER_GPIO4_CONTEXT, RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT, + * RM_L4PER_I2C1_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, + * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, + * RM_L4SEC_AES1_CONTEXT, RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, + * RM_L4SEC_DES3DES_CONTEXT, RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, + * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT, + * RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT, + * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_TESLA_TESLA_CONTEXT */ #define OMAP4430_LOSTCONTEXT_RFF_SHIFT 1 -#define OMAP4430_LOSTCONTEXT_RFF_MASK BITFIELD(1, 1) +#define OMAP4430_LOSTCONTEXT_RFF_MASK (1 << 1) /* Used by RM_ABE_AESS_CONTEXT */ #define OMAP4430_LOSTMEM_AESSMEM_SHIFT 8 -#define OMAP4430_LOSTMEM_AESSMEM_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_AESSMEM_MASK (1 << 8) /* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */ #define OMAP4430_LOSTMEM_CAM_MEM_SHIFT 8 -#define OMAP4430_LOSTMEM_CAM_MEM_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_CAM_MEM_MASK (1 << 8) /* Used by RM_L3INSTR_OCP_WP1_CONTEXT */ #define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT 8 -#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK (1 << 8) /* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */ #define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT 9 -#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK BITFIELD(9, 9) +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK (1 << 9) /* Used by RM_L3_2_OCMC_RAM_CONTEXT */ #define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT 8 -#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK (1 << 8) /* * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT, * RM_SDMA_SDMA_CONTEXT */ #define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT 8 -#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK (1 << 8) /* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */ #define OMAP4430_LOSTMEM_DSS_MEM_SHIFT 8 -#define OMAP4430_LOSTMEM_DSS_MEM_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_DSS_MEM_MASK (1 << 8) /* Used by RM_DUCATI_DUCATI_CONTEXT */ #define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT 9 -#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK BITFIELD(9, 9) +#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK (1 << 9) /* Used by RM_DUCATI_DUCATI_CONTEXT */ #define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT 8 -#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK (1 << 8) /* Used by RM_EMU_DEBUGSS_CONTEXT */ #define OMAP4430_LOSTMEM_EMU_BANK_SHIFT 8 -#define OMAP4430_LOSTMEM_EMU_BANK_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_EMU_BANK_MASK (1 << 8) /* Used by RM_GFX_GFX_CONTEXT */ #define OMAP4430_LOSTMEM_GFX_MEM_SHIFT 8 -#define OMAP4430_LOSTMEM_GFX_MEM_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_GFX_MEM_MASK (1 << 8) /* Used by RM_IVAHD_IVAHD_CONTEXT */ #define OMAP4430_LOSTMEM_HWA_MEM_SHIFT 10 -#define OMAP4430_LOSTMEM_HWA_MEM_MASK BITFIELD(10, 10) +#define OMAP4430_LOSTMEM_HWA_MEM_MASK (1 << 10) /* * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT, @@ -620,19 +644,19 @@ * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT */ #define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT 8 -#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK (1 << 8) /* Used by RM_MPU_MPU_CONTEXT */ #define OMAP4430_LOSTMEM_MPU_L1_SHIFT 8 -#define OMAP4430_LOSTMEM_MPU_L1_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_MPU_L1_MASK (1 << 8) /* Used by RM_MPU_MPU_CONTEXT */ #define OMAP4430_LOSTMEM_MPU_L2_SHIFT 9 -#define OMAP4430_LOSTMEM_MPU_L2_MASK BITFIELD(9, 9) +#define OMAP4430_LOSTMEM_MPU_L2_MASK (1 << 9) /* Used by RM_MPU_MPU_CONTEXT */ #define OMAP4430_LOSTMEM_MPU_RAM_SHIFT 10 -#define OMAP4430_LOSTMEM_MPU_RAM_MASK BITFIELD(10, 10) +#define OMAP4430_LOSTMEM_MPU_RAM_MASK (1 << 10) /* * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, @@ -640,14 +664,14 @@ * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT */ #define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT 8 -#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK (1 << 8) /* * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT */ #define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT 8 -#define OMAP4430_LOSTMEM_PERIHPMEM_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_PERIHPMEM_MASK (1 << 8) /* * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT, @@ -655,245 +679,237 @@ * RM_L4SEC_CRYPTODMA_CONTEXT */ #define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT 8 -#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK (1 << 8) /* Used by RM_IVAHD_SL2_CONTEXT */ #define OMAP4430_LOSTMEM_SL2_MEM_SHIFT 8 -#define OMAP4430_LOSTMEM_SL2_MEM_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_SL2_MEM_MASK (1 << 8) /* Used by RM_IVAHD_IVAHD_CONTEXT */ #define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT 8 -#define OMAP4430_LOSTMEM_TCM1_MEM_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_TCM1_MEM_MASK (1 << 8) /* Used by RM_IVAHD_IVAHD_CONTEXT */ #define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT 9 -#define OMAP4430_LOSTMEM_TCM2_MEM_MASK BITFIELD(9, 9) +#define OMAP4430_LOSTMEM_TCM2_MEM_MASK (1 << 9) /* Used by RM_TESLA_TESLA_CONTEXT */ #define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT 10 -#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK BITFIELD(10, 10) +#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK (1 << 10) /* Used by RM_TESLA_TESLA_CONTEXT */ #define OMAP4430_LOSTMEM_TESLA_L1_SHIFT 8 -#define OMAP4430_LOSTMEM_TESLA_L1_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_TESLA_L1_MASK (1 << 8) /* Used by RM_TESLA_TESLA_CONTEXT */ #define OMAP4430_LOSTMEM_TESLA_L2_SHIFT 9 -#define OMAP4430_LOSTMEM_TESLA_L2_MASK BITFIELD(9, 9) +#define OMAP4430_LOSTMEM_TESLA_L2_MASK (1 << 9) /* Used by RM_WKUP_SARRAM_CONTEXT */ #define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT 8 -#define OMAP4430_LOSTMEM_WKUP_BANK_MASK BITFIELD(8, 8) +#define OMAP4430_LOSTMEM_WKUP_BANK_MASK (1 << 8) /* - * Used by PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, - * PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, - * PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL + * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, + * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_IVAHD_PWRSTCTRL, + * PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL */ #define OMAP4430_LOWPOWERSTATECHANGE_SHIFT 4 -#define OMAP4430_LOWPOWERSTATECHANGE_MASK BITFIELD(4, 4) - -/* Used by PM_CORE_PWRSTCTRL */ -#define OMAP4430_MEMORYCHANGE_SHIFT 3 -#define OMAP4430_MEMORYCHANGE_MASK BITFIELD(3, 3) +#define OMAP4430_LOWPOWERSTATECHANGE_MASK (1 << 4) /* Used by PRM_MODEM_IF_CTRL */ #define OMAP4430_MODEM_READY_SHIFT 1 -#define OMAP4430_MODEM_READY_MASK BITFIELD(1, 1) +#define OMAP4430_MODEM_READY_MASK (1 << 1) /* Used by PRM_MODEM_IF_CTRL */ #define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT 9 -#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK BITFIELD(9, 9) +#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK (1 << 9) /* Used by PRM_MODEM_IF_CTRL */ #define OMAP4430_MODEM_SLEEP_ST_SHIFT 16 -#define OMAP4430_MODEM_SLEEP_ST_MASK BITFIELD(16, 16) +#define OMAP4430_MODEM_SLEEP_ST_MASK (1 << 16) /* Used by PRM_MODEM_IF_CTRL */ #define OMAP4430_MODEM_WAKE_IRQ_SHIFT 8 -#define OMAP4430_MODEM_WAKE_IRQ_MASK BITFIELD(8, 8) +#define OMAP4430_MODEM_WAKE_IRQ_MASK (1 << 8) /* Used by PM_MPU_PWRSTCTRL */ #define OMAP4430_MPU_L1_ONSTATE_SHIFT 16 -#define OMAP4430_MPU_L1_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_MPU_L1_ONSTATE_MASK (0x3 << 16) /* Used by PM_MPU_PWRSTCTRL */ #define OMAP4430_MPU_L1_RETSTATE_SHIFT 8 -#define OMAP4430_MPU_L1_RETSTATE_MASK BITFIELD(8, 8) +#define OMAP4430_MPU_L1_RETSTATE_MASK (1 << 8) /* Used by PM_MPU_PWRSTST */ #define OMAP4430_MPU_L1_STATEST_SHIFT 4 -#define OMAP4430_MPU_L1_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_MPU_L1_STATEST_MASK (0x3 << 4) /* Used by PM_MPU_PWRSTCTRL */ #define OMAP4430_MPU_L2_ONSTATE_SHIFT 18 -#define OMAP4430_MPU_L2_ONSTATE_MASK BITFIELD(18, 19) +#define OMAP4430_MPU_L2_ONSTATE_MASK (0x3 << 18) /* Used by PM_MPU_PWRSTCTRL */ #define OMAP4430_MPU_L2_RETSTATE_SHIFT 9 -#define OMAP4430_MPU_L2_RETSTATE_MASK BITFIELD(9, 9) +#define OMAP4430_MPU_L2_RETSTATE_MASK (1 << 9) /* Used by PM_MPU_PWRSTST */ #define OMAP4430_MPU_L2_STATEST_SHIFT 6 -#define OMAP4430_MPU_L2_STATEST_MASK BITFIELD(6, 7) +#define OMAP4430_MPU_L2_STATEST_MASK (0x3 << 6) /* Used by PM_MPU_PWRSTCTRL */ #define OMAP4430_MPU_RAM_ONSTATE_SHIFT 20 -#define OMAP4430_MPU_RAM_ONSTATE_MASK BITFIELD(20, 21) +#define OMAP4430_MPU_RAM_ONSTATE_MASK (0x3 << 20) /* Used by PM_MPU_PWRSTCTRL */ #define OMAP4430_MPU_RAM_RETSTATE_SHIFT 10 -#define OMAP4430_MPU_RAM_RETSTATE_MASK BITFIELD(10, 10) +#define OMAP4430_MPU_RAM_RETSTATE_MASK (1 << 10) /* Used by PM_MPU_PWRSTST */ #define OMAP4430_MPU_RAM_STATEST_SHIFT 8 -#define OMAP4430_MPU_RAM_STATEST_MASK BITFIELD(8, 9) +#define OMAP4430_MPU_RAM_STATEST_MASK (0x3 << 8) /* Used by PRM_RSTST */ #define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT 2 -#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK BITFIELD(2, 2) +#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK (1 << 2) /* Used by PRM_RSTST */ #define OMAP4430_MPU_WDT_RST_SHIFT 3 -#define OMAP4430_MPU_WDT_RST_MASK BITFIELD(3, 3) +#define OMAP4430_MPU_WDT_RST_MASK (1 << 3) /* Used by PM_L4PER_PWRSTCTRL */ #define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT 18 -#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK BITFIELD(18, 19) +#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK (0x3 << 18) /* Used by PM_L4PER_PWRSTCTRL */ #define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT 9 -#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK BITFIELD(9, 9) +#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK (1 << 9) /* Used by PM_L4PER_PWRSTST */ #define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT 6 -#define OMAP4430_NONRETAINED_BANK_STATEST_MASK BITFIELD(6, 7) +#define OMAP4430_NONRETAINED_BANK_STATEST_MASK (0x3 << 6) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT 24 -#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK BITFIELD(24, 25) +#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK (0x3 << 24) /* Used by PM_CORE_PWRSTCTRL */ #define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT 12 -#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK BITFIELD(12, 12) +#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK (1 << 12) /* Used by PM_CORE_PWRSTST */ #define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT 12 -#define OMAP4430_OCP_NRET_BANK_STATEST_MASK BITFIELD(12, 13) +#define OMAP4430_OCP_NRET_BANK_STATEST_MASK (0x3 << 12) /* * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, * PRM_VC_VAL_CMD_VDD_MPU_L */ #define OMAP4430_OFF_SHIFT 0 -#define OMAP4430_OFF_MASK BITFIELD(0, 7) - -/* Used by PRM_LDO_BANDGAP_CTRL */ -#define OMAP4430_OFF_ENABLE_SHIFT 0 -#define OMAP4430_OFF_ENABLE_MASK BITFIELD(0, 0) +#define OMAP4430_OFF_MASK (0xff << 0) /* * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, * PRM_VC_VAL_CMD_VDD_MPU_L */ #define OMAP4430_ON_SHIFT 24 -#define OMAP4430_ON_MASK BITFIELD(24, 31) +#define OMAP4430_ON_MASK (0xff << 24) /* * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, * PRM_VC_VAL_CMD_VDD_MPU_L */ #define OMAP4430_ONLP_SHIFT 16 -#define OMAP4430_ONLP_MASK BITFIELD(16, 23) +#define OMAP4430_ONLP_MASK (0xff << 16) /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ #define OMAP4430_OPP_CHANGE_SHIFT 2 -#define OMAP4430_OPP_CHANGE_MASK BITFIELD(2, 2) +#define OMAP4430_OPP_CHANGE_MASK (1 << 2) /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ #define OMAP4430_OPP_SEL_SHIFT 0 -#define OMAP4430_OPP_SEL_MASK BITFIELD(0, 1) +#define OMAP4430_OPP_SEL_MASK (0x3 << 0) /* Used by PRM_SRAM_COUNT */ #define OMAP4430_PCHARGECNT_VALUE_SHIFT 0 -#define OMAP4430_PCHARGECNT_VALUE_MASK BITFIELD(0, 5) +#define OMAP4430_PCHARGECNT_VALUE_MASK (0x3f << 0) /* Used by PRM_PSCON_COUNT */ #define OMAP4430_PCHARGE_TIME_SHIFT 0 -#define OMAP4430_PCHARGE_TIME_MASK BITFIELD(0, 7) +#define OMAP4430_PCHARGE_TIME_MASK (0xff << 0) /* Used by PM_ABE_PWRSTCTRL */ #define OMAP4430_PERIPHMEM_ONSTATE_SHIFT 20 -#define OMAP4430_PERIPHMEM_ONSTATE_MASK BITFIELD(20, 21) +#define OMAP4430_PERIPHMEM_ONSTATE_MASK (0x3 << 20) /* Used by PM_ABE_PWRSTCTRL */ #define OMAP4430_PERIPHMEM_RETSTATE_SHIFT 10 -#define OMAP4430_PERIPHMEM_RETSTATE_MASK BITFIELD(10, 10) +#define OMAP4430_PERIPHMEM_RETSTATE_MASK (1 << 10) /* Used by PM_ABE_PWRSTST */ #define OMAP4430_PERIPHMEM_STATEST_SHIFT 8 -#define OMAP4430_PERIPHMEM_STATEST_MASK BITFIELD(8, 9) +#define OMAP4430_PERIPHMEM_STATEST_MASK (0x3 << 8) /* Used by PRM_PHASE1_CNDP */ #define OMAP4430_PHASE1_CNDP_SHIFT 0 -#define OMAP4430_PHASE1_CNDP_MASK BITFIELD(0, 31) +#define OMAP4430_PHASE1_CNDP_MASK (0xffffffff << 0) /* Used by PRM_PHASE2A_CNDP */ #define OMAP4430_PHASE2A_CNDP_SHIFT 0 -#define OMAP4430_PHASE2A_CNDP_MASK BITFIELD(0, 31) +#define OMAP4430_PHASE2A_CNDP_MASK (0xffffffff << 0) /* Used by PRM_PHASE2B_CNDP */ #define OMAP4430_PHASE2B_CNDP_SHIFT 0 -#define OMAP4430_PHASE2B_CNDP_MASK BITFIELD(0, 31) +#define OMAP4430_PHASE2B_CNDP_MASK (0xffffffff << 0) /* Used by PRM_PSCON_COUNT */ #define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT 8 -#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK BITFIELD(8, 15) +#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK (0xff << 8) /* - * Used by PM_EMU_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, - * PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, - * PM_CEFUSE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, - * PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL + * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, + * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_EMU_PWRSTCTRL, PM_GFX_PWRSTCTRL, + * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL, + * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL */ #define OMAP4430_POWERSTATE_SHIFT 0 -#define OMAP4430_POWERSTATE_MASK BITFIELD(0, 1) +#define OMAP4430_POWERSTATE_MASK (0x3 << 0) /* - * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, - * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, - * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST, + * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST, + * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST */ #define OMAP4430_POWERSTATEST_SHIFT 0 -#define OMAP4430_POWERSTATEST_MASK BITFIELD(0, 1) +#define OMAP4430_POWERSTATEST_MASK (0x3 << 0) /* Used by PRM_PWRREQCTRL */ #define OMAP4430_PWRREQ_COND_SHIFT 0 -#define OMAP4430_PWRREQ_COND_MASK BITFIELD(0, 1) +#define OMAP4430_PWRREQ_COND_MASK (0x3 << 0) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_RACEN_VDD_CORE_L_SHIFT 3 -#define OMAP4430_RACEN_VDD_CORE_L_MASK BITFIELD(3, 3) +#define OMAP4430_RACEN_VDD_CORE_L_MASK (1 << 3) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_RACEN_VDD_IVA_L_SHIFT 11 -#define OMAP4430_RACEN_VDD_IVA_L_MASK BITFIELD(11, 11) +#define OMAP4430_RACEN_VDD_IVA_L_MASK (1 << 11) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_RACEN_VDD_MPU_L_SHIFT 20 -#define OMAP4430_RACEN_VDD_MPU_L_MASK BITFIELD(20, 20) +#define OMAP4430_RACEN_VDD_MPU_L_MASK (1 << 20) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_RAC_VDD_CORE_L_SHIFT 2 -#define OMAP4430_RAC_VDD_CORE_L_MASK BITFIELD(2, 2) +#define OMAP4430_RAC_VDD_CORE_L_MASK (1 << 2) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_RAC_VDD_IVA_L_SHIFT 10 -#define OMAP4430_RAC_VDD_IVA_L_MASK BITFIELD(10, 10) +#define OMAP4430_RAC_VDD_IVA_L_MASK (1 << 10) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_RAC_VDD_MPU_L_SHIFT 19 -#define OMAP4430_RAC_VDD_MPU_L_MASK BITFIELD(19, 19) +#define OMAP4430_RAC_VDD_MPU_L_MASK (1 << 19) /* * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, @@ -901,7 +917,7 @@ * PRM_VOLTSETUP_MPU_RET_SLEEP */ #define OMAP4430_RAMP_DOWN_COUNT_SHIFT 16 -#define OMAP4430_RAMP_DOWN_COUNT_MASK BITFIELD(16, 21) +#define OMAP4430_RAMP_DOWN_COUNT_MASK (0x3f << 16) /* * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, @@ -909,7 +925,7 @@ * PRM_VOLTSETUP_MPU_RET_SLEEP */ #define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT 24 -#define OMAP4430_RAMP_DOWN_PRESCAL_MASK BITFIELD(24, 25) +#define OMAP4430_RAMP_DOWN_PRESCAL_MASK (0x3 << 24) /* * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, @@ -917,7 +933,7 @@ * PRM_VOLTSETUP_MPU_RET_SLEEP */ #define OMAP4430_RAMP_UP_COUNT_SHIFT 0 -#define OMAP4430_RAMP_UP_COUNT_MASK BITFIELD(0, 5) +#define OMAP4430_RAMP_UP_COUNT_MASK (0x3f << 0) /* * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, @@ -925,1281 +941,1381 @@ * PRM_VOLTSETUP_MPU_RET_SLEEP */ #define OMAP4430_RAMP_UP_PRESCAL_SHIFT 8 -#define OMAP4430_RAMP_UP_PRESCAL_MASK BITFIELD(8, 9) +#define OMAP4430_RAMP_UP_PRESCAL_MASK (0x3 << 8) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_RAV_VDD_CORE_L_SHIFT 1 -#define OMAP4430_RAV_VDD_CORE_L_MASK BITFIELD(1, 1) +#define OMAP4430_RAV_VDD_CORE_L_MASK (1 << 1) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_RAV_VDD_IVA_L_SHIFT 9 -#define OMAP4430_RAV_VDD_IVA_L_MASK BITFIELD(9, 9) +#define OMAP4430_RAV_VDD_IVA_L_MASK (1 << 9) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_RAV_VDD_MPU_L_SHIFT 18 -#define OMAP4430_RAV_VDD_MPU_L_MASK BITFIELD(18, 18) +#define OMAP4430_RAV_VDD_MPU_L_MASK (1 << 18) /* Used by PRM_VC_VAL_BYPASS */ #define OMAP4430_REGADDR_SHIFT 8 -#define OMAP4430_REGADDR_MASK BITFIELD(8, 15) +#define OMAP4430_REGADDR_MASK (0xff << 8) /* * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, * PRM_VC_VAL_CMD_VDD_MPU_L */ #define OMAP4430_RET_SHIFT 8 -#define OMAP4430_RET_MASK BITFIELD(8, 15) +#define OMAP4430_RET_MASK (0xff << 8) /* Used by PM_L4PER_PWRSTCTRL */ #define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT 16 -#define OMAP4430_RETAINED_BANK_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_RETAINED_BANK_ONSTATE_MASK (0x3 << 16) /* Used by PM_L4PER_PWRSTCTRL */ #define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT 8 -#define OMAP4430_RETAINED_BANK_RETSTATE_MASK BITFIELD(8, 8) +#define OMAP4430_RETAINED_BANK_RETSTATE_MASK (1 << 8) /* Used by PM_L4PER_PWRSTST */ #define OMAP4430_RETAINED_BANK_STATEST_SHIFT 4 -#define OMAP4430_RETAINED_BANK_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_RETAINED_BANK_STATEST_MASK (0x3 << 4) /* * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, * PRM_LDO_SRAM_MPU_CTRL */ #define OMAP4430_RETMODE_ENABLE_SHIFT 0 -#define OMAP4430_RETMODE_ENABLE_MASK BITFIELD(0, 0) +#define OMAP4430_RETMODE_ENABLE_MASK (1 << 0) -/* Used by REVISION_PRM */ -#define OMAP4430_REV_SHIFT 0 -#define OMAP4430_REV_MASK BITFIELD(0, 7) - -/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */ +/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */ #define OMAP4430_RST1_SHIFT 0 -#define OMAP4430_RST1_MASK BITFIELD(0, 0) +#define OMAP4430_RST1_MASK (1 << 0) -/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */ +/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */ #define OMAP4430_RST1ST_SHIFT 0 -#define OMAP4430_RST1ST_MASK BITFIELD(0, 0) +#define OMAP4430_RST1ST_MASK (1 << 0) -/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */ +/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */ #define OMAP4430_RST2_SHIFT 1 -#define OMAP4430_RST2_MASK BITFIELD(1, 1) +#define OMAP4430_RST2_MASK (1 << 1) -/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */ +/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */ #define OMAP4430_RST2ST_SHIFT 1 -#define OMAP4430_RST2ST_MASK BITFIELD(1, 1) +#define OMAP4430_RST2ST_MASK (1 << 1) /* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */ #define OMAP4430_RST3_SHIFT 2 -#define OMAP4430_RST3_MASK BITFIELD(2, 2) +#define OMAP4430_RST3_MASK (1 << 2) /* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */ #define OMAP4430_RST3ST_SHIFT 2 -#define OMAP4430_RST3ST_MASK BITFIELD(2, 2) +#define OMAP4430_RST3ST_MASK (1 << 2) /* Used by PRM_RSTTIME */ #define OMAP4430_RSTTIME1_SHIFT 0 -#define OMAP4430_RSTTIME1_MASK BITFIELD(0, 9) +#define OMAP4430_RSTTIME1_MASK (0x3ff << 0) /* Used by PRM_RSTTIME */ #define OMAP4430_RSTTIME2_SHIFT 10 -#define OMAP4430_RSTTIME2_MASK BITFIELD(10, 14) +#define OMAP4430_RSTTIME2_MASK (0x1f << 10) /* Used by PRM_RSTCTRL */ #define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT 1 -#define OMAP4430_RST_GLOBAL_COLD_SW_MASK BITFIELD(1, 1) +#define OMAP4430_RST_GLOBAL_COLD_SW_MASK (1 << 1) /* Used by PRM_RSTCTRL */ #define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT 0 -#define OMAP4430_RST_GLOBAL_WARM_SW_MASK BITFIELD(0, 0) +#define OMAP4430_RST_GLOBAL_WARM_SW_MASK (1 << 0) + +/* Used by REVISION_PRM */ +#define OMAP4430_R_RTL_SHIFT 11 +#define OMAP4430_R_RTL_MASK (0x1f << 11) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_SA_VDD_CORE_L_SHIFT 0 -#define OMAP4430_SA_VDD_CORE_L_MASK BITFIELD(0, 0) +#define OMAP4430_SA_VDD_CORE_L_MASK (1 << 0) /* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */ #define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT 0 -#define OMAP4430_SA_VDD_CORE_L_0_6_MASK BITFIELD(0, 6) +#define OMAP4430_SA_VDD_CORE_L_0_6_MASK (0x7f << 0) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_SA_VDD_IVA_L_SHIFT 8 -#define OMAP4430_SA_VDD_IVA_L_MASK BITFIELD(8, 8) +#define OMAP4430_SA_VDD_IVA_L_MASK (1 << 8) /* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */ #define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT 8 -#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK BITFIELD(8, 14) +#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK (0x7f << 8) /* Used by PRM_VC_CFG_CHANNEL */ #define OMAP4430_SA_VDD_MPU_L_SHIFT 16 -#define OMAP4430_SA_VDD_MPU_L_MASK BITFIELD(16, 16) +#define OMAP4430_SA_VDD_MPU_L_MASK (1 << 16) /* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */ #define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT 16 -#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK BITFIELD(16, 22) +#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK (0x7f << 16) + +/* Used by REVISION_PRM */ +#define OMAP4430_SCHEME_SHIFT 30 +#define OMAP4430_SCHEME_MASK (0x3 << 30) /* Used by PRM_VC_CFG_I2C_CLK */ #define OMAP4430_SCLH_SHIFT 0 -#define OMAP4430_SCLH_MASK BITFIELD(0, 7) +#define OMAP4430_SCLH_MASK (0xff << 0) /* Used by PRM_VC_CFG_I2C_CLK */ #define OMAP4430_SCLL_SHIFT 8 -#define OMAP4430_SCLL_MASK BITFIELD(8, 15) +#define OMAP4430_SCLL_MASK (0xff << 8) /* Used by PRM_RSTST */ #define OMAP4430_SECURE_WDT_RST_SHIFT 4 -#define OMAP4430_SECURE_WDT_RST_MASK BITFIELD(4, 4) +#define OMAP4430_SECURE_WDT_RST_MASK (1 << 4) /* Used by PM_IVAHD_PWRSTCTRL */ #define OMAP4430_SL2_MEM_ONSTATE_SHIFT 18 -#define OMAP4430_SL2_MEM_ONSTATE_MASK BITFIELD(18, 19) +#define OMAP4430_SL2_MEM_ONSTATE_MASK (0x3 << 18) /* Used by PM_IVAHD_PWRSTCTRL */ #define OMAP4430_SL2_MEM_RETSTATE_SHIFT 9 -#define OMAP4430_SL2_MEM_RETSTATE_MASK BITFIELD(9, 9) +#define OMAP4430_SL2_MEM_RETSTATE_MASK (1 << 9) /* Used by PM_IVAHD_PWRSTST */ #define OMAP4430_SL2_MEM_STATEST_SHIFT 6 -#define OMAP4430_SL2_MEM_STATEST_MASK BITFIELD(6, 7) +#define OMAP4430_SL2_MEM_STATEST_MASK (0x3 << 6) /* Used by PRM_VC_VAL_BYPASS */ #define OMAP4430_SLAVEADDR_SHIFT 0 -#define OMAP4430_SLAVEADDR_MASK BITFIELD(0, 6) +#define OMAP4430_SLAVEADDR_MASK (0x7f << 0) /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ #define OMAP4430_SLEEP_RBB_SEL_SHIFT 3 -#define OMAP4430_SLEEP_RBB_SEL_MASK BITFIELD(3, 3) +#define OMAP4430_SLEEP_RBB_SEL_MASK (1 << 3) /* Used by PRM_SRAM_COUNT */ #define OMAP4430_SLPCNT_VALUE_SHIFT 16 -#define OMAP4430_SLPCNT_VALUE_MASK BITFIELD(16, 23) +#define OMAP4430_SLPCNT_VALUE_MASK (0xff << 16) /* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ #define OMAP4430_SMPSWAITTIMEMAX_SHIFT 8 -#define OMAP4430_SMPSWAITTIMEMAX_MASK BITFIELD(8, 23) +#define OMAP4430_SMPSWAITTIMEMAX_MASK (0xffff << 8) /* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ #define OMAP4430_SMPSWAITTIMEMIN_SHIFT 8 -#define OMAP4430_SMPSWAITTIMEMIN_MASK BITFIELD(8, 23) +#define OMAP4430_SMPSWAITTIMEMIN_MASK (0xffff << 8) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_SMPS_RA_ERR_CORE_SHIFT 1 +#define OMAP4430_SMPS_RA_ERR_CORE_MASK (1 << 1) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_SMPS_RA_ERR_IVA_SHIFT 9 +#define OMAP4430_SMPS_RA_ERR_IVA_MASK (1 << 9) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_SMPS_RA_ERR_MPU_SHIFT 17 +#define OMAP4430_SMPS_RA_ERR_MPU_MASK (1 << 17) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_SMPS_SA_ERR_CORE_SHIFT 0 +#define OMAP4430_SMPS_SA_ERR_CORE_MASK (1 << 0) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_SMPS_SA_ERR_IVA_SHIFT 8 +#define OMAP4430_SMPS_SA_ERR_IVA_MASK (1 << 8) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_SMPS_SA_ERR_MPU_SHIFT 16 +#define OMAP4430_SMPS_SA_ERR_MPU_MASK (1 << 16) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_SHIFT 2 +#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_MASK (1 << 2) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_SHIFT 10 +#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_MASK (1 << 10) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_SHIFT 18 +#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_MASK (1 << 18) /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ #define OMAP4430_SR2EN_SHIFT 0 -#define OMAP4430_SR2EN_MASK BITFIELD(0, 0) +#define OMAP4430_SR2EN_MASK (1 << 0) /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ #define OMAP4430_SR2_IN_TRANSITION_SHIFT 6 -#define OMAP4430_SR2_IN_TRANSITION_MASK BITFIELD(6, 6) +#define OMAP4430_SR2_IN_TRANSITION_MASK (1 << 6) /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ #define OMAP4430_SR2_STATUS_SHIFT 3 -#define OMAP4430_SR2_STATUS_MASK BITFIELD(3, 4) +#define OMAP4430_SR2_STATUS_MASK (0x3 << 3) /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ #define OMAP4430_SR2_WTCNT_VALUE_SHIFT 8 -#define OMAP4430_SR2_WTCNT_VALUE_MASK BITFIELD(8, 15) +#define OMAP4430_SR2_WTCNT_VALUE_MASK (0xff << 8) /* * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, * PRM_LDO_SRAM_MPU_CTRL */ #define OMAP4430_SRAMLDO_STATUS_SHIFT 8 -#define OMAP4430_SRAMLDO_STATUS_MASK BITFIELD(8, 8) +#define OMAP4430_SRAMLDO_STATUS_MASK (1 << 8) /* * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, * PRM_LDO_SRAM_MPU_CTRL */ #define OMAP4430_SRAM_IN_TRANSITION_SHIFT 9 -#define OMAP4430_SRAM_IN_TRANSITION_MASK BITFIELD(9, 9) +#define OMAP4430_SRAM_IN_TRANSITION_MASK (1 << 9) /* Used by PRM_VC_CFG_I2C_MODE */ #define OMAP4430_SRMODEEN_SHIFT 4 -#define OMAP4430_SRMODEEN_MASK BITFIELD(4, 4) +#define OMAP4430_SRMODEEN_MASK (1 << 4) /* Used by PRM_VOLTSETUP_WARMRESET */ #define OMAP4430_STABLE_COUNT_SHIFT 0 -#define OMAP4430_STABLE_COUNT_MASK BITFIELD(0, 5) +#define OMAP4430_STABLE_COUNT_MASK (0x3f << 0) /* Used by PRM_VOLTSETUP_WARMRESET */ #define OMAP4430_STABLE_PRESCAL_SHIFT 8 -#define OMAP4430_STABLE_PRESCAL_MASK BITFIELD(8, 9) +#define OMAP4430_STABLE_PRESCAL_MASK (0x3 << 8) + +/* Used by PRM_LDO_BANDGAP_SETUP */ +#define OMAP4430_STARTUP_COUNT_SHIFT 0 +#define OMAP4430_STARTUP_COUNT_MASK (0xff << 0) + +/* Renamed from STARTUP_COUNT Used by PRM_SRAM_COUNT */ +#define OMAP4430_STARTUP_COUNT_24_31_SHIFT 24 +#define OMAP4430_STARTUP_COUNT_24_31_MASK (0xff << 24) /* Used by PM_IVAHD_PWRSTCTRL */ #define OMAP4430_TCM1_MEM_ONSTATE_SHIFT 20 -#define OMAP4430_TCM1_MEM_ONSTATE_MASK BITFIELD(20, 21) +#define OMAP4430_TCM1_MEM_ONSTATE_MASK (0x3 << 20) /* Used by PM_IVAHD_PWRSTCTRL */ #define OMAP4430_TCM1_MEM_RETSTATE_SHIFT 10 -#define OMAP4430_TCM1_MEM_RETSTATE_MASK BITFIELD(10, 10) +#define OMAP4430_TCM1_MEM_RETSTATE_MASK (1 << 10) /* Used by PM_IVAHD_PWRSTST */ #define OMAP4430_TCM1_MEM_STATEST_SHIFT 8 -#define OMAP4430_TCM1_MEM_STATEST_MASK BITFIELD(8, 9) +#define OMAP4430_TCM1_MEM_STATEST_MASK (0x3 << 8) /* Used by PM_IVAHD_PWRSTCTRL */ #define OMAP4430_TCM2_MEM_ONSTATE_SHIFT 22 -#define OMAP4430_TCM2_MEM_ONSTATE_MASK BITFIELD(22, 23) +#define OMAP4430_TCM2_MEM_ONSTATE_MASK (0x3 << 22) /* Used by PM_IVAHD_PWRSTCTRL */ #define OMAP4430_TCM2_MEM_RETSTATE_SHIFT 11 -#define OMAP4430_TCM2_MEM_RETSTATE_MASK BITFIELD(11, 11) +#define OMAP4430_TCM2_MEM_RETSTATE_MASK (1 << 11) /* Used by PM_IVAHD_PWRSTST */ #define OMAP4430_TCM2_MEM_STATEST_SHIFT 10 -#define OMAP4430_TCM2_MEM_STATEST_MASK BITFIELD(10, 11) +#define OMAP4430_TCM2_MEM_STATEST_MASK (0x3 << 10) /* Used by RM_TESLA_RSTST */ #define OMAP4430_TESLASS_EMU_RSTST_SHIFT 2 -#define OMAP4430_TESLASS_EMU_RSTST_MASK BITFIELD(2, 2) +#define OMAP4430_TESLASS_EMU_RSTST_MASK (1 << 2) /* Used by RM_TESLA_RSTST */ #define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT 3 -#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK BITFIELD(3, 3) +#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK (1 << 3) /* Used by PM_TESLA_PWRSTCTRL */ #define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT 20 -#define OMAP4430_TESLA_EDMA_ONSTATE_MASK BITFIELD(20, 21) +#define OMAP4430_TESLA_EDMA_ONSTATE_MASK (0x3 << 20) /* Used by PM_TESLA_PWRSTCTRL */ #define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT 10 -#define OMAP4430_TESLA_EDMA_RETSTATE_MASK BITFIELD(10, 10) +#define OMAP4430_TESLA_EDMA_RETSTATE_MASK (1 << 10) /* Used by PM_TESLA_PWRSTST */ #define OMAP4430_TESLA_EDMA_STATEST_SHIFT 8 -#define OMAP4430_TESLA_EDMA_STATEST_MASK BITFIELD(8, 9) +#define OMAP4430_TESLA_EDMA_STATEST_MASK (0x3 << 8) /* Used by PM_TESLA_PWRSTCTRL */ #define OMAP4430_TESLA_L1_ONSTATE_SHIFT 16 -#define OMAP4430_TESLA_L1_ONSTATE_MASK BITFIELD(16, 17) +#define OMAP4430_TESLA_L1_ONSTATE_MASK (0x3 << 16) /* Used by PM_TESLA_PWRSTCTRL */ #define OMAP4430_TESLA_L1_RETSTATE_SHIFT 8 -#define OMAP4430_TESLA_L1_RETSTATE_MASK BITFIELD(8, 8) +#define OMAP4430_TESLA_L1_RETSTATE_MASK (1 << 8) /* Used by PM_TESLA_PWRSTST */ #define OMAP4430_TESLA_L1_STATEST_SHIFT 4 -#define OMAP4430_TESLA_L1_STATEST_MASK BITFIELD(4, 5) +#define OMAP4430_TESLA_L1_STATEST_MASK (0x3 << 4) /* Used by PM_TESLA_PWRSTCTRL */ #define OMAP4430_TESLA_L2_ONSTATE_SHIFT 18 -#define OMAP4430_TESLA_L2_ONSTATE_MASK BITFIELD(18, 19) +#define OMAP4430_TESLA_L2_ONSTATE_MASK (0x3 << 18) /* Used by PM_TESLA_PWRSTCTRL */ #define OMAP4430_TESLA_L2_RETSTATE_SHIFT 9 -#define OMAP4430_TESLA_L2_RETSTATE_MASK BITFIELD(9, 9) +#define OMAP4430_TESLA_L2_RETSTATE_MASK (1 << 9) /* Used by PM_TESLA_PWRSTST */ #define OMAP4430_TESLA_L2_STATEST_SHIFT 6 -#define OMAP4430_TESLA_L2_STATEST_MASK BITFIELD(6, 7) +#define OMAP4430_TESLA_L2_STATEST_MASK (0x3 << 6) /* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ #define OMAP4430_TIMEOUT_SHIFT 0 -#define OMAP4430_TIMEOUT_MASK BITFIELD(0, 15) +#define OMAP4430_TIMEOUT_MASK (0xffff << 0) /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ #define OMAP4430_TIMEOUTEN_SHIFT 3 -#define OMAP4430_TIMEOUTEN_MASK BITFIELD(3, 3) +#define OMAP4430_TIMEOUTEN_MASK (1 << 3) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_TRANSITION_EN_SHIFT 8 -#define OMAP4430_TRANSITION_EN_MASK BITFIELD(8, 8) +#define OMAP4430_TRANSITION_EN_MASK (1 << 8) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_TRANSITION_ST_SHIFT 8 -#define OMAP4430_TRANSITION_ST_MASK BITFIELD(8, 8) +#define OMAP4430_TRANSITION_ST_MASK (1 << 8) /* Used by PRM_VC_VAL_BYPASS */ #define OMAP4430_VALID_SHIFT 24 -#define OMAP4430_VALID_MASK BITFIELD(24, 24) +#define OMAP4430_VALID_MASK (1 << 24) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VC_BYPASSACK_EN_SHIFT 14 -#define OMAP4430_VC_BYPASSACK_EN_MASK BITFIELD(14, 14) +#define OMAP4430_VC_BYPASSACK_EN_MASK (1 << 14) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VC_BYPASSACK_ST_SHIFT 14 -#define OMAP4430_VC_BYPASSACK_ST_MASK BITFIELD(14, 14) +#define OMAP4430_VC_BYPASSACK_ST_MASK (1 << 14) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_CORE_VPACK_EN_SHIFT 22 +#define OMAP4430_VC_CORE_VPACK_EN_MASK (1 << 22) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_CORE_VPACK_ST_SHIFT 22 +#define OMAP4430_VC_CORE_VPACK_ST_MASK (1 << 22) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VC_IVA_VPACK_EN_SHIFT 30 -#define OMAP4430_VC_IVA_VPACK_EN_MASK BITFIELD(30, 30) +#define OMAP4430_VC_IVA_VPACK_EN_MASK (1 << 30) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VC_IVA_VPACK_ST_SHIFT 30 -#define OMAP4430_VC_IVA_VPACK_ST_MASK BITFIELD(30, 30) +#define OMAP4430_VC_IVA_VPACK_ST_MASK (1 << 30) /* Used by PRM_IRQENABLE_MPU_2 */ #define OMAP4430_VC_MPU_VPACK_EN_SHIFT 6 -#define OMAP4430_VC_MPU_VPACK_EN_MASK BITFIELD(6, 6) +#define OMAP4430_VC_MPU_VPACK_EN_MASK (1 << 6) /* Used by PRM_IRQSTATUS_MPU_2 */ #define OMAP4430_VC_MPU_VPACK_ST_SHIFT 6 -#define OMAP4430_VC_MPU_VPACK_ST_MASK BITFIELD(6, 6) +#define OMAP4430_VC_MPU_VPACK_ST_MASK (1 << 6) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VC_RAERR_EN_SHIFT 12 -#define OMAP4430_VC_RAERR_EN_MASK BITFIELD(12, 12) +#define OMAP4430_VC_RAERR_EN_MASK (1 << 12) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VC_RAERR_ST_SHIFT 12 -#define OMAP4430_VC_RAERR_ST_MASK BITFIELD(12, 12) +#define OMAP4430_VC_RAERR_ST_MASK (1 << 12) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VC_SAERR_EN_SHIFT 11 -#define OMAP4430_VC_SAERR_EN_MASK BITFIELD(11, 11) +#define OMAP4430_VC_SAERR_EN_MASK (1 << 11) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VC_SAERR_ST_SHIFT 11 -#define OMAP4430_VC_SAERR_ST_MASK BITFIELD(11, 11) +#define OMAP4430_VC_SAERR_ST_MASK (1 << 11) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VC_TOERR_EN_SHIFT 13 -#define OMAP4430_VC_TOERR_EN_MASK BITFIELD(13, 13) +#define OMAP4430_VC_TOERR_EN_MASK (1 << 13) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VC_TOERR_ST_SHIFT 13 -#define OMAP4430_VC_TOERR_ST_MASK BITFIELD(13, 13) +#define OMAP4430_VC_TOERR_ST_MASK (1 << 13) /* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ #define OMAP4430_VDDMAX_SHIFT 24 -#define OMAP4430_VDDMAX_MASK BITFIELD(24, 31) +#define OMAP4430_VDDMAX_MASK (0xff << 24) /* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ #define OMAP4430_VDDMIN_SHIFT 16 -#define OMAP4430_VDDMIN_MASK BITFIELD(16, 23) +#define OMAP4430_VDDMIN_MASK (0xff << 16) /* Used by PRM_VOLTCTRL */ #define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT 12 -#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK BITFIELD(12, 12) +#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK (1 << 12) /* Used by PRM_RSTST */ #define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT 8 -#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK BITFIELD(8, 8) +#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK (1 << 8) /* Used by PRM_VOLTCTRL */ #define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT 14 -#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK BITFIELD(14, 14) +#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK (1 << 14) /* Used by PRM_VOLTCTRL */ #define OMAP4430_VDD_IVA_PRESENCE_SHIFT 9 -#define OMAP4430_VDD_IVA_PRESENCE_MASK BITFIELD(9, 9) +#define OMAP4430_VDD_IVA_PRESENCE_MASK (1 << 9) /* Used by PRM_RSTST */ #define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT 7 -#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK BITFIELD(7, 7) +#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK (1 << 7) /* Used by PRM_VOLTCTRL */ #define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT 13 -#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK BITFIELD(13, 13) +#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK (1 << 13) /* Used by PRM_VOLTCTRL */ #define OMAP4430_VDD_MPU_PRESENCE_SHIFT 8 -#define OMAP4430_VDD_MPU_PRESENCE_MASK BITFIELD(8, 8) +#define OMAP4430_VDD_MPU_PRESENCE_MASK (1 << 8) /* Used by PRM_RSTST */ #define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT 6 -#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK BITFIELD(6, 6) +#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK (1 << 6) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_VFSM_RA_ERR_CORE_SHIFT 4 +#define OMAP4430_VFSM_RA_ERR_CORE_MASK (1 << 4) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_VFSM_RA_ERR_IVA_SHIFT 12 +#define OMAP4430_VFSM_RA_ERR_IVA_MASK (1 << 12) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_VFSM_RA_ERR_MPU_SHIFT 20 +#define OMAP4430_VFSM_RA_ERR_MPU_MASK (1 << 20) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_VFSM_SA_ERR_CORE_SHIFT 3 +#define OMAP4430_VFSM_SA_ERR_CORE_MASK (1 << 3) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_VFSM_SA_ERR_IVA_SHIFT 11 +#define OMAP4430_VFSM_SA_ERR_IVA_MASK (1 << 11) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_VFSM_SA_ERR_MPU_SHIFT 19 +#define OMAP4430_VFSM_SA_ERR_MPU_MASK (1 << 19) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_SHIFT 5 +#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_MASK (1 << 5) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_SHIFT 13 +#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_MASK (1 << 13) + +/* Used by PRM_VC_ERRST */ +#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_SHIFT 21 +#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_MASK (1 << 21) /* Used by PRM_VC_VAL_SMPS_RA_VOL */ #define OMAP4430_VOLRA_VDD_CORE_L_SHIFT 0 -#define OMAP4430_VOLRA_VDD_CORE_L_MASK BITFIELD(0, 7) +#define OMAP4430_VOLRA_VDD_CORE_L_MASK (0xff << 0) /* Used by PRM_VC_VAL_SMPS_RA_VOL */ #define OMAP4430_VOLRA_VDD_IVA_L_SHIFT 8 -#define OMAP4430_VOLRA_VDD_IVA_L_MASK BITFIELD(8, 15) +#define OMAP4430_VOLRA_VDD_IVA_L_MASK (0xff << 8) /* Used by PRM_VC_VAL_SMPS_RA_VOL */ #define OMAP4430_VOLRA_VDD_MPU_L_SHIFT 16 -#define OMAP4430_VOLRA_VDD_MPU_L_MASK BITFIELD(16, 23) +#define OMAP4430_VOLRA_VDD_MPU_L_MASK (0xff << 16) /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ #define OMAP4430_VPENABLE_SHIFT 0 -#define OMAP4430_VPENABLE_MASK BITFIELD(0, 0) +#define OMAP4430_VPENABLE_MASK (1 << 0) /* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */ #define OMAP4430_VPINIDLE_SHIFT 0 -#define OMAP4430_VPINIDLE_MASK BITFIELD(0, 0) +#define OMAP4430_VPINIDLE_MASK (1 << 0) /* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */ #define OMAP4430_VPVOLTAGE_SHIFT 0 -#define OMAP4430_VPVOLTAGE_MASK BITFIELD(0, 7) +#define OMAP4430_VPVOLTAGE_MASK (0xff << 0) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT 20 -#define OMAP4430_VP_CORE_EQVALUE_EN_MASK BITFIELD(20, 20) +#define OMAP4430_VP_CORE_EQVALUE_EN_MASK (1 << 20) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT 20 -#define OMAP4430_VP_CORE_EQVALUE_ST_MASK BITFIELD(20, 20) +#define OMAP4430_VP_CORE_EQVALUE_ST_MASK (1 << 20) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT 18 -#define OMAP4430_VP_CORE_MAXVDD_EN_MASK BITFIELD(18, 18) +#define OMAP4430_VP_CORE_MAXVDD_EN_MASK (1 << 18) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT 18 -#define OMAP4430_VP_CORE_MAXVDD_ST_MASK BITFIELD(18, 18) +#define OMAP4430_VP_CORE_MAXVDD_ST_MASK (1 << 18) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_CORE_MINVDD_EN_SHIFT 17 -#define OMAP4430_VP_CORE_MINVDD_EN_MASK BITFIELD(17, 17) +#define OMAP4430_VP_CORE_MINVDD_EN_MASK (1 << 17) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_CORE_MINVDD_ST_SHIFT 17 -#define OMAP4430_VP_CORE_MINVDD_ST_MASK BITFIELD(17, 17) +#define OMAP4430_VP_CORE_MINVDD_ST_MASK (1 << 17) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT 19 -#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK BITFIELD(19, 19) +#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK (1 << 19) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT 19 -#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK BITFIELD(19, 19) +#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK (1 << 19) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT 16 -#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK BITFIELD(16, 16) +#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK (1 << 16) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT 16 -#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK BITFIELD(16, 16) +#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK (1 << 16) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT 21 -#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK BITFIELD(21, 21) +#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK (1 << 21) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT 21 -#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK BITFIELD(21, 21) +#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK (1 << 21) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT 28 -#define OMAP4430_VP_IVA_EQVALUE_EN_MASK BITFIELD(28, 28) +#define OMAP4430_VP_IVA_EQVALUE_EN_MASK (1 << 28) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT 28 -#define OMAP4430_VP_IVA_EQVALUE_ST_MASK BITFIELD(28, 28) +#define OMAP4430_VP_IVA_EQVALUE_ST_MASK (1 << 28) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT 26 -#define OMAP4430_VP_IVA_MAXVDD_EN_MASK BITFIELD(26, 26) +#define OMAP4430_VP_IVA_MAXVDD_EN_MASK (1 << 26) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT 26 -#define OMAP4430_VP_IVA_MAXVDD_ST_MASK BITFIELD(26, 26) +#define OMAP4430_VP_IVA_MAXVDD_ST_MASK (1 << 26) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_IVA_MINVDD_EN_SHIFT 25 -#define OMAP4430_VP_IVA_MINVDD_EN_MASK BITFIELD(25, 25) +#define OMAP4430_VP_IVA_MINVDD_EN_MASK (1 << 25) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_IVA_MINVDD_ST_SHIFT 25 -#define OMAP4430_VP_IVA_MINVDD_ST_MASK BITFIELD(25, 25) +#define OMAP4430_VP_IVA_MINVDD_ST_MASK (1 << 25) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT 27 -#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK BITFIELD(27, 27) +#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK (1 << 27) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT 27 -#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK BITFIELD(27, 27) +#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK (1 << 27) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT 24 -#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK BITFIELD(24, 24) +#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK (1 << 24) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT 24 -#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK BITFIELD(24, 24) +#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK (1 << 24) /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ #define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT 29 -#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK BITFIELD(29, 29) +#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK (1 << 29) /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ #define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT 29 -#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK BITFIELD(29, 29) +#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK (1 << 29) /* Used by PRM_IRQENABLE_MPU_2 */ #define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT 4 -#define OMAP4430_VP_MPU_EQVALUE_EN_MASK BITFIELD(4, 4) +#define OMAP4430_VP_MPU_EQVALUE_EN_MASK (1 << 4) /* Used by PRM_IRQSTATUS_MPU_2 */ #define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT 4 -#define OMAP4430_VP_MPU_EQVALUE_ST_MASK BITFIELD(4, 4) +#define OMAP4430_VP_MPU_EQVALUE_ST_MASK (1 << 4) /* Used by PRM_IRQENABLE_MPU_2 */ #define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT 2 -#define OMAP4430_VP_MPU_MAXVDD_EN_MASK BITFIELD(2, 2) +#define OMAP4430_VP_MPU_MAXVDD_EN_MASK (1 << 2) /* Used by PRM_IRQSTATUS_MPU_2 */ #define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT 2 -#define OMAP4430_VP_MPU_MAXVDD_ST_MASK BITFIELD(2, 2) +#define OMAP4430_VP_MPU_MAXVDD_ST_MASK (1 << 2) /* Used by PRM_IRQENABLE_MPU_2 */ #define OMAP4430_VP_MPU_MINVDD_EN_SHIFT 1 -#define OMAP4430_VP_MPU_MINVDD_EN_MASK BITFIELD(1, 1) +#define OMAP4430_VP_MPU_MINVDD_EN_MASK (1 << 1) /* Used by PRM_IRQSTATUS_MPU_2 */ #define OMAP4430_VP_MPU_MINVDD_ST_SHIFT 1 -#define OMAP4430_VP_MPU_MINVDD_ST_MASK BITFIELD(1, 1) +#define OMAP4430_VP_MPU_MINVDD_ST_MASK (1 << 1) /* Used by PRM_IRQENABLE_MPU_2 */ #define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT 3 -#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK BITFIELD(3, 3) +#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK (1 << 3) /* Used by PRM_IRQSTATUS_MPU_2 */ #define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT 3 -#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK BITFIELD(3, 3) +#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK (1 << 3) /* Used by PRM_IRQENABLE_MPU_2 */ #define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT 0 -#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK BITFIELD(0, 0) +#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK (1 << 0) /* Used by PRM_IRQSTATUS_MPU_2 */ #define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT 0 -#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK BITFIELD(0, 0) +#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK (1 << 0) /* Used by PRM_IRQENABLE_MPU_2 */ #define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT 5 -#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK BITFIELD(5, 5) +#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK (1 << 5) /* Used by PRM_IRQSTATUS_MPU_2 */ #define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT 5 -#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK BITFIELD(5, 5) +#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK (1 << 5) /* Used by PRM_SRAM_COUNT */ #define OMAP4430_VSETUPCNT_VALUE_SHIFT 8 -#define OMAP4430_VSETUPCNT_VALUE_MASK BITFIELD(8, 15) +#define OMAP4430_VSETUPCNT_VALUE_MASK (0xff << 8) /* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ #define OMAP4430_VSTEPMAX_SHIFT 0 -#define OMAP4430_VSTEPMAX_MASK BITFIELD(0, 7) +#define OMAP4430_VSTEPMAX_MASK (0xff << 0) /* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ #define OMAP4430_VSTEPMIN_SHIFT 0 -#define OMAP4430_VSTEPMIN_MASK BITFIELD(0, 7) +#define OMAP4430_VSTEPMIN_MASK (0xff << 0) /* Used by PRM_MODEM_IF_CTRL */ #define OMAP4430_WAKE_MODEM_SHIFT 0 -#define OMAP4430_WAKE_MODEM_MASK BITFIELD(0, 0) +#define OMAP4430_WAKE_MODEM_MASK (1 << 0) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK (1 << 1) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_DISPC_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_DISPC_MPU_MASK (1 << 0) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK (1 << 3) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK (1 << 2) /* Used by PM_ABE_DMIC_WKDEP */ #define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK (1 << 7) /* Used by PM_ABE_DMIC_WKDEP */ #define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK (1 << 6) /* Used by PM_ABE_DMIC_WKDEP */ #define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK (1 << 0) /* Used by PM_ABE_DMIC_WKDEP */ #define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK (1 << 2) /* Used by PM_L4PER_DMTIMER10_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK (1 << 0) /* Used by PM_L4PER_DMTIMER11_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_DMTIMER11_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK (1 << 0) /* Used by PM_L4PER_DMTIMER2_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK (1 << 0) /* Used by PM_L4PER_DMTIMER3_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_DMTIMER3_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK (1 << 0) /* Used by PM_L4PER_DMTIMER4_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_DMTIMER4_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK (1 << 0) /* Used by PM_L4PER_DMTIMER9_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_DMTIMER9_WKDEP */ #define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK (1 << 0) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT 5 -#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK BITFIELD(5, 5) +#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK (1 << 5) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT 4 -#define OMAP4430_WKUPDEP_DSI1_MPU_MASK BITFIELD(4, 4) +#define OMAP4430_WKUPDEP_DSI1_MPU_MASK (1 << 4) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK (1 << 7) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK (1 << 6) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT 9 -#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK BITFIELD(9, 9) +#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK (1 << 9) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT 8 -#define OMAP4430_WKUPDEP_DSI2_MPU_MASK BITFIELD(8, 8) +#define OMAP4430_WKUPDEP_DSI2_MPU_MASK (1 << 8) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT 11 -#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK BITFIELD(11, 11) +#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK (1 << 11) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT 10 -#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK BITFIELD(10, 10) +#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK (1 << 10) /* Used by PM_WKUP_GPIO1_WKDEP */ #define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK (1 << 1) /* Used by PM_WKUP_GPIO1_WKDEP */ #define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK (1 << 0) /* Used by PM_WKUP_GPIO1_WKDEP */ #define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK (1 << 6) /* Used by PM_L4PER_GPIO2_WKDEP */ #define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_GPIO2_WKDEP */ #define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK (1 << 0) /* Used by PM_L4PER_GPIO2_WKDEP */ #define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK (1 << 6) /* Used by PM_L4PER_GPIO3_WKDEP */ #define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK (1 << 0) /* Used by PM_L4PER_GPIO3_WKDEP */ #define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK (1 << 6) /* Used by PM_L4PER_GPIO4_WKDEP */ #define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK (1 << 0) /* Used by PM_L4PER_GPIO4_WKDEP */ #define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK (1 << 6) /* Used by PM_L4PER_GPIO5_WKDEP */ #define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK (1 << 0) /* Used by PM_L4PER_GPIO5_WKDEP */ #define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK (1 << 6) /* Used by PM_L4PER_GPIO6_WKDEP */ #define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK (1 << 0) /* Used by PM_L4PER_GPIO6_WKDEP */ #define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK (1 << 6) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT 19 -#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK BITFIELD(19, 19) +#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK (1 << 19) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT 13 -#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK BITFIELD(13, 13) +#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK (1 << 13) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT 12 -#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK BITFIELD(12, 12) +#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK (1 << 12) /* Used by PM_DSS_DSS_WKDEP */ #define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT 14 -#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK BITFIELD(14, 14) +#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK (1 << 14) /* Used by PM_L4PER_HECC1_WKDEP */ #define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_HECC1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_HECC1_MPU_MASK (1 << 0) /* Used by PM_L4PER_HECC2_WKDEP */ #define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_HECC2_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_HECC2_MPU_MASK (1 << 0) /* Used by PM_L3INIT_HSI_WKDEP */ #define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK (1 << 6) /* Used by PM_L3INIT_HSI_WKDEP */ #define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK (1 << 1) /* Used by PM_L3INIT_HSI_WKDEP */ #define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK (1 << 0) /* Used by PM_L4PER_I2C1_WKDEP */ #define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK (1 << 7) /* Used by PM_L4PER_I2C1_WKDEP */ #define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_I2C1_WKDEP */ #define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK (1 << 0) /* Used by PM_L4PER_I2C2_WKDEP */ #define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK (1 << 7) /* Used by PM_L4PER_I2C2_WKDEP */ #define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_I2C2_WKDEP */ #define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK (1 << 0) /* Used by PM_L4PER_I2C3_WKDEP */ #define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK (1 << 7) /* Used by PM_L4PER_I2C3_WKDEP */ #define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_I2C3_WKDEP */ #define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK (1 << 0) /* Used by PM_L4PER_I2C4_WKDEP */ #define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK (1 << 7) /* Used by PM_L4PER_I2C4_WKDEP */ #define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_I2C4_WKDEP */ #define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK (1 << 0) /* Used by PM_L4PER_I2C5_WKDEP */ #define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK (1 << 7) /* Used by PM_L4PER_I2C5_WKDEP */ #define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK (1 << 0) /* Used by PM_WKUP_KEYBOARD_WKDEP */ #define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK (1 << 0) /* Used by PM_ABE_MCASP_WKDEP */ #define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK (1 << 7) /* Used by PM_ABE_MCASP_WKDEP */ #define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK (1 << 6) /* Used by PM_ABE_MCASP_WKDEP */ #define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK (1 << 0) /* Used by PM_ABE_MCASP_WKDEP */ #define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK (1 << 2) /* Used by PM_L4PER_MCASP2_WKDEP */ #define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK (1 << 7) /* Used by PM_L4PER_MCASP2_WKDEP */ #define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK (1 << 6) /* Used by PM_L4PER_MCASP2_WKDEP */ #define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK (1 << 0) /* Used by PM_L4PER_MCASP2_WKDEP */ #define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK (1 << 2) /* Used by PM_L4PER_MCASP3_WKDEP */ #define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK (1 << 7) /* Used by PM_L4PER_MCASP3_WKDEP */ #define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK (1 << 6) /* Used by PM_L4PER_MCASP3_WKDEP */ #define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK (1 << 0) /* Used by PM_L4PER_MCASP3_WKDEP */ #define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK (1 << 2) /* Used by PM_ABE_MCBSP1_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK (1 << 0) /* Used by PM_ABE_MCBSP1_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK (1 << 3) /* Used by PM_ABE_MCBSP1_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK (1 << 2) /* Used by PM_ABE_MCBSP2_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK (1 << 0) /* Used by PM_ABE_MCBSP2_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK (1 << 3) /* Used by PM_ABE_MCBSP2_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK (1 << 2) /* Used by PM_ABE_MCBSP3_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK (1 << 0) /* Used by PM_ABE_MCBSP3_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK (1 << 3) /* Used by PM_ABE_MCBSP3_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK (1 << 2) /* Used by PM_L4PER_MCBSP4_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK (1 << 0) /* Used by PM_L4PER_MCBSP4_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK (1 << 3) /* Used by PM_L4PER_MCBSP4_WKDEP */ #define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK (1 << 2) /* Used by PM_L4PER_MCSPI1_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_MCSPI1_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK (1 << 0) /* Used by PM_L4PER_MCSPI1_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK (1 << 3) /* Used by PM_L4PER_MCSPI1_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK (1 << 2) /* Used by PM_L4PER_MCSPI2_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_MCSPI2_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK (1 << 0) /* Used by PM_L4PER_MCSPI2_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK (1 << 3) /* Used by PM_L4PER_MCSPI3_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK (1 << 0) /* Used by PM_L4PER_MCSPI3_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK (1 << 3) /* Used by PM_L4PER_MCSPI4_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK (1 << 0) /* Used by PM_L4PER_MCSPI4_WKDEP */ #define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK (1 << 3) /* Used by PM_L3INIT_MMC1_WKDEP */ #define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK (1 << 1) /* Used by PM_L3INIT_MMC1_WKDEP */ #define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MMC1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MMC1_MPU_MASK (1 << 0) /* Used by PM_L3INIT_MMC1_WKDEP */ #define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK (1 << 3) /* Used by PM_L3INIT_MMC1_WKDEP */ #define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK (1 << 2) /* Used by PM_L3INIT_MMC2_WKDEP */ #define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK (1 << 1) /* Used by PM_L3INIT_MMC2_WKDEP */ #define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MMC2_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MMC2_MPU_MASK (1 << 0) /* Used by PM_L3INIT_MMC2_WKDEP */ #define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK (1 << 3) /* Used by PM_L3INIT_MMC2_WKDEP */ #define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK (1 << 2) /* Used by PM_L3INIT_MMC6_WKDEP */ #define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK (1 << 1) /* Used by PM_L3INIT_MMC6_WKDEP */ #define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MMC6_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MMC6_MPU_MASK (1 << 0) /* Used by PM_L3INIT_MMC6_WKDEP */ #define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK (1 << 2) /* Used by PM_L4PER_MMCSD3_WKDEP */ #define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_MMCSD3_WKDEP */ #define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK (1 << 0) /* Used by PM_L4PER_MMCSD3_WKDEP */ #define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK (1 << 3) /* Used by PM_L4PER_MMCSD4_WKDEP */ #define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_MMCSD4_WKDEP */ #define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK (1 << 0) /* Used by PM_L4PER_MMCSD4_WKDEP */ #define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK (1 << 3) /* Used by PM_L4PER_MMCSD5_WKDEP */ #define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_MMCSD5_WKDEP */ #define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK (1 << 0) /* Used by PM_L4PER_MMCSD5_WKDEP */ #define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK (1 << 3) /* Used by PM_L3INIT_PCIESS_WKDEP */ #define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK (1 << 0) /* Used by PM_L3INIT_PCIESS_WKDEP */ #define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK (1 << 2) /* Used by PM_ABE_PDM_WKDEP */ #define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK (1 << 7) /* Used by PM_ABE_PDM_WKDEP */ #define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK (1 << 6) /* Used by PM_ABE_PDM_WKDEP */ #define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK (1 << 0) /* Used by PM_ABE_PDM_WKDEP */ #define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK (1 << 2) /* Used by PM_WKUP_RTC_WKDEP */ #define OMAP4430_WKUPDEP_RTC_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_RTC_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_RTC_MPU_MASK (1 << 0) /* Used by PM_L3INIT_SATA_WKDEP */ #define OMAP4430_WKUPDEP_SATA_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_SATA_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_SATA_MPU_MASK (1 << 0) /* Used by PM_L3INIT_SATA_WKDEP */ #define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_SATA_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_SATA_TESLA_MASK (1 << 2) /* Used by PM_ABE_SLIMBUS_WKDEP */ #define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK (1 << 7) /* Used by PM_ABE_SLIMBUS_WKDEP */ #define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK (1 << 6) /* Used by PM_ABE_SLIMBUS_WKDEP */ #define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK (1 << 0) /* Used by PM_ABE_SLIMBUS_WKDEP */ #define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK (1 << 2) /* Used by PM_L4PER_SLIMBUS2_WKDEP */ #define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT 7 -#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK BITFIELD(7, 7) +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK (1 << 7) /* Used by PM_L4PER_SLIMBUS2_WKDEP */ #define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT 6 -#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK BITFIELD(6, 6) +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK (1 << 6) /* Used by PM_L4PER_SLIMBUS2_WKDEP */ #define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK (1 << 0) /* Used by PM_L4PER_SLIMBUS2_WKDEP */ #define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK (1 << 2) /* Used by PM_ALWON_SR_CORE_WKDEP */ #define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK (1 << 1) /* Used by PM_ALWON_SR_CORE_WKDEP */ #define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK (1 << 0) /* Used by PM_ALWON_SR_IVA_WKDEP */ #define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK (1 << 1) /* Used by PM_ALWON_SR_IVA_WKDEP */ #define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK (1 << 0) /* Used by PM_ALWON_SR_MPU_WKDEP */ #define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK (1 << 0) /* Used by PM_WKUP_TIMER12_WKDEP */ #define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK (1 << 0) /* Used by PM_WKUP_TIMER1_WKDEP */ #define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK (1 << 0) /* Used by PM_ABE_TIMER5_WKDEP */ #define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK (1 << 0) /* Used by PM_ABE_TIMER5_WKDEP */ #define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK (1 << 2) /* Used by PM_ABE_TIMER6_WKDEP */ #define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK (1 << 0) /* Used by PM_ABE_TIMER6_WKDEP */ #define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK (1 << 2) /* Used by PM_ABE_TIMER7_WKDEP */ #define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK (1 << 0) /* Used by PM_ABE_TIMER7_WKDEP */ #define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK (1 << 2) /* Used by PM_ABE_TIMER8_WKDEP */ #define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK (1 << 0) /* Used by PM_ABE_TIMER8_WKDEP */ #define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK (1 << 2) /* Used by PM_L4PER_UART1_WKDEP */ #define OMAP4430_WKUPDEP_UART1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_UART1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_UART1_MPU_MASK (1 << 0) /* Used by PM_L4PER_UART1_WKDEP */ #define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_UART1_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_UART1_SDMA_MASK (1 << 3) /* Used by PM_L4PER_UART2_WKDEP */ #define OMAP4430_WKUPDEP_UART2_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_UART2_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_UART2_MPU_MASK (1 << 0) /* Used by PM_L4PER_UART2_WKDEP */ #define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_UART2_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_UART2_SDMA_MASK (1 << 3) /* Used by PM_L4PER_UART3_WKDEP */ #define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK (1 << 1) /* Used by PM_L4PER_UART3_WKDEP */ #define OMAP4430_WKUPDEP_UART3_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_UART3_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_UART3_MPU_MASK (1 << 0) /* Used by PM_L4PER_UART3_WKDEP */ #define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_UART3_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_UART3_SDMA_MASK (1 << 3) /* Used by PM_L4PER_UART3_WKDEP */ #define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT 2 -#define OMAP4430_WKUPDEP_UART3_TESLA_MASK BITFIELD(2, 2) +#define OMAP4430_WKUPDEP_UART3_TESLA_MASK (1 << 2) /* Used by PM_L4PER_UART4_WKDEP */ #define OMAP4430_WKUPDEP_UART4_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_UART4_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_UART4_MPU_MASK (1 << 0) /* Used by PM_L4PER_UART4_WKDEP */ #define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_UART4_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_UART4_SDMA_MASK (1 << 3) /* Used by PM_L3INIT_UNIPRO1_WKDEP */ #define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK (1 << 1) /* Used by PM_L3INIT_UNIPRO1_WKDEP */ #define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK (1 << 0) /* Used by PM_L3INIT_USB_HOST_WKDEP */ #define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK (1 << 1) /* Used by PM_L3INIT_USB_HOST_FS_WKDEP */ #define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK (1 << 1) /* Used by PM_L3INIT_USB_HOST_FS_WKDEP */ #define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK (1 << 0) /* Used by PM_L3INIT_USB_HOST_WKDEP */ #define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK (1 << 0) /* Used by PM_L3INIT_USB_OTG_WKDEP */ #define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK (1 << 1) /* Used by PM_L3INIT_USB_OTG_WKDEP */ #define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK (1 << 0) /* Used by PM_L3INIT_USB_TLL_WKDEP */ #define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK (1 << 1) /* Used by PM_L3INIT_USB_TLL_WKDEP */ #define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK (1 << 0) /* Used by PM_WKUP_USIM_WKDEP */ #define OMAP4430_WKUPDEP_USIM_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_USIM_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_USIM_MPU_MASK (1 << 0) /* Used by PM_WKUP_USIM_WKDEP */ #define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT 3 -#define OMAP4430_WKUPDEP_USIM_SDMA_MASK BITFIELD(3, 3) +#define OMAP4430_WKUPDEP_USIM_SDMA_MASK (1 << 3) /* Used by PM_WKUP_WDT2_WKDEP */ #define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK (1 << 1) /* Used by PM_WKUP_WDT2_WKDEP */ #define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_WDT2_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_WDT2_MPU_MASK (1 << 0) /* Used by PM_ABE_WDT3_WKDEP */ #define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT 0 -#define OMAP4430_WKUPDEP_WDT3_MPU_MASK BITFIELD(0, 0) +#define OMAP4430_WKUPDEP_WDT3_MPU_MASK (1 << 0) /* Used by PM_L3INIT_HSI_WKDEP */ #define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT 8 -#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK BITFIELD(8, 8) +#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK (1 << 8) /* Used by PM_L3INIT_XHPI_WKDEP */ #define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT 1 -#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK BITFIELD(1, 1) +#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK (1 << 1) /* Used by PRM_IO_PMCTRL */ #define OMAP4430_WUCLK_CTRL_SHIFT 8 -#define OMAP4430_WUCLK_CTRL_MASK BITFIELD(8, 8) +#define OMAP4430_WUCLK_CTRL_MASK (1 << 8) /* Used by PRM_IO_PMCTRL */ #define OMAP4430_WUCLK_STATUS_SHIFT 9 -#define OMAP4430_WUCLK_STATUS_MASK BITFIELD(9, 9) +#define OMAP4430_WUCLK_STATUS_MASK (1 << 9) + +/* Used by REVISION_PRM */ +#define OMAP4430_X_MAJOR_SHIFT 8 +#define OMAP4430_X_MAJOR_MASK (0x7 << 8) + +/* Used by REVISION_PRM */ +#define OMAP4430_Y_MINOR_SHIFT 0 +#define OMAP4430_Y_MINOR_MASK (0x3f << 0) #endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 588873b9303a..7be040b2fdab 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -5,7 +5,7 @@ * OMAP2/3 Power/Reset Management (PRM) register definitions * * Copyright (C) 2007-2009 Texas Instruments, Inc. - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2010 Nokia Corporation * * Written by Paul Walmsley * @@ -246,6 +246,15 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) return prm_rmw_mod_reg_bits(bits, 0x0, module, idx); } +/* These omap2_ PRM functions apply to both OMAP2 and 3 */ +int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); +int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); +int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift); + +int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift); +int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift); +int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift); + #endif /* @@ -398,4 +407,11 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) #define OMAP_POWERSTATE_MASK (0x3 << 0) +/* + * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP + * submodule to exit hardreset + */ +#define MAX_MODULE_HARDRESET_WAIT 10000 + + #endif diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c new file mode 100644 index 000000000000..421771eee450 --- /dev/null +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -0,0 +1,110 @@ +/* + * OMAP2/3 PRM module functions + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * Benoît Cousson + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> + +#include <plat/common.h> +#include <plat/cpu.h> +#include <plat/prcm.h> + +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "prm-regbits-34xx.h" + +/** + * omap2_prm_is_hardreset_asserted - read the HW reset line state of + * submodules contained in the hwmod module + * @prm_mod: PRM submodule base (e.g. CORE_MOD) + * @shift: register bit shift corresponding to the reset line to check + * + * Returns 1 if the (sub)module hardreset line is currently asserted, + * 0 if the (sub)module hardreset line is not currently asserted, or + * -EINVAL if called while running on a non-OMAP2/3 chip. + */ +int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) +{ + if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) + return -EINVAL; + + return prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, + (1 << shift)); +} + +/** + * omap2_prm_assert_hardreset - assert the HW reset line of a submodule + * @prm_mod: PRM submodule base (e.g. CORE_MOD) + * @shift: register bit shift corresponding to the reset line to assert + * + * Some IPs like dsp or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * place the submodule into reset. Returns 0 upon success or -EINVAL + * upon an argument error. + */ +int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) +{ + u32 mask; + + if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) + return -EINVAL; + + mask = 1 << shift; + prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL); + + return 0; +} + +/** + * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait + * @prm_mod: PRM submodule base (e.g. CORE_MOD) + * @shift: register bit shift corresponding to the reset line to deassert + * + * Some IPs like dsp or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * take the submodule out of reset and wait until the PRCM indicates + * that the reset has completed before returning. Returns 0 upon success or + * -EINVAL upon an argument error, -EEXIST if the submodule was already out + * of reset, or -EBUSY if the submodule did not exit reset promptly. + */ +int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift) +{ + u32 mask; + int c; + + if (!(cpu_is_omap24xx() || cpu_is_omap34xx())) + return -EINVAL; + + mask = 1 << shift; + + /* Check the current status to avoid de-asserting the line twice */ + if (prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0) + return -EEXIST; + + /* Clear the reset status by writing 1 to the status bit */ + prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST); + /* de-assert the reset control line */ + prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL); + /* wait the status to be set */ + omap_test_timeout(prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST, + mask), + MAX_MODULE_HARDRESET_WAIT, c); + + return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; +} + diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c new file mode 100644 index 000000000000..a1ff918d9bed --- /dev/null +++ b/arch/arm/mach-omap2/prm44xx.c @@ -0,0 +1,116 @@ +/* + * OMAP4 PRM module functions + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * Benoît Cousson + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> + +#include <plat/common.h> +#include <plat/cpu.h> +#include <plat/prcm.h> + +#include "prm.h" +#include "prm-regbits-44xx.h" + +/* + * Address offset (in bytes) between the reset control and the reset + * status registers: 4 bytes on OMAP4 + */ +#define OMAP4_RST_CTRL_ST_OFFSET 4 + +/** + * omap4_prm_is_hardreset_asserted - read the HW reset line state of + * submodules contained in the hwmod module + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to check + * + * Returns 1 if the (sub)module hardreset line is currently asserted, + * 0 if the (sub)module hardreset line is not currently asserted, or + * -EINVAL upon parameter error. + */ +int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift) +{ + if (!cpu_is_omap44xx() || !rstctrl_reg) + return -EINVAL; + + return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift)); +} + +/** + * omap4_prm_assert_hardreset - assert the HW reset line of a submodule + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to assert + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * place the submodule into reset. Returns 0 upon success or -EINVAL + * upon an argument error. + */ +int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift) +{ + u32 mask; + + if (!cpu_is_omap44xx() || !rstctrl_reg) + return -EINVAL; + + mask = 1 << shift; + omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg); + + return 0; +} + +/** + * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to deassert + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * take the submodule out of reset and wait until the PRCM indicates + * that the reset has completed before returning. Returns 0 upon success or + * -EINVAL upon an argument error, -EEXIST if the submodule was already out + * of reset, or -EBUSY if the submodule did not exit reset promptly. + */ +int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift) +{ + u32 mask; + void __iomem *rstst_reg; + int c; + + if (!cpu_is_omap44xx() || !rstctrl_reg) + return -EINVAL; + + rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET; + + mask = 1 << shift; + + /* Check the current status to avoid de-asserting the line twice */ + if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0) + return -EEXIST; + + /* Clear the reset status by writing 1 to the status bit */ + omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg); + /* de-assert the reset control line */ + omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg); + /* wait the status to be set */ + omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask), + MAX_MODULE_HARDRESET_WAIT, c); + + return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; +} + diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index fe8ef26431e5..59839dbabd84 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -44,14 +44,12 @@ #define OMAP4430_PRM_IRQSTATUS_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030) #define OMAP4_PRM_IRQENABLE_TESLA_OFFSET 0x0038 #define OMAP4430_PRM_IRQENABLE_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038) -#define OMAP4_PRM_PRM_PROFILING_CLKCTRL_OFFSET 0x0040 -#define OMAP4430_PRM_PRM_PROFILING_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040) +#define OMAP4_CM_PRM_PROFILING_CLKCTRL_OFFSET 0x0040 +#define OMAP4430_CM_PRM_PROFILING_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040) /* PRM.CKGEN_PRM register offsets */ #define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET 0x0000 #define OMAP4430_CM_ABE_DSS_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000) -#define OMAP4_CM_DPLL_SYS_REF_CLKSEL_OFFSET 0x0004 -#define OMAP4430_CM_DPLL_SYS_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004) #define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET 0x0008 #define OMAP4430_CM_L4_WKUP_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008) #define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET 0x000c @@ -686,8 +684,8 @@ #define OMAP4430_PRM_LDO_ABB_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8) #define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET 0x00dc #define OMAP4430_PRM_LDO_ABB_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc) -#define OMAP4_PRM_LDO_BANDGAP_CTRL_OFFSET 0x00e0 -#define OMAP4430_PRM_LDO_BANDGAP_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0) +#define OMAP4_PRM_LDO_BANDGAP_SETUP_OFFSET 0x00e0 +#define OMAP4430_PRM_LDO_BANDGAP_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0) #define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET 0x00e4 #define OMAP4430_PRM_DEVICE_OFF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4) #define OMAP4_PRM_PHASE1_CNDP_OFFSET 0x00e8 @@ -698,6 +696,8 @@ #define OMAP4430_PRM_PHASE2B_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0) #define OMAP4_PRM_MODEM_IF_CTRL_OFFSET 0x00f4 #define OMAP4430_PRM_MODEM_IF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4) +#define OMAP4_PRM_VC_ERRST_OFFSET 0x00f8 +#define OMAP4430_PRM_VC_ERRST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f8) /* * PRCM_MPU @@ -715,6 +715,8 @@ /* PRCM_MPU.DEVICE_PRM register offsets */ #define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET 0x0000 #define OMAP4430_PRCM_MPU_PRM_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0000) +#define OMAP4_PRCM_MPU_PRM_PSCON_COUNT_OFFSET 0x0004 +#define OMAP4430_PRCM_MPU_PRM_PSCON_COUNT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0004) /* PRCM_MPU.CPU0 register offsets */ #define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET 0x0000 diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 566e991ede81..338e46a844a4 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -19,20 +19,31 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/serial_8250.h> +#include <linux/pm_runtime.h> + +#ifdef CONFIG_SERIAL_OMAP +#include <plat/omap-serial.h> +#endif #include <plat/common.h> #include <plat/board.h> #include <plat/clock.h> -#include <plat/control.h> +#include <plat/dma.h> +#include <plat/omap_hwmod.h> +#include <plat/omap_device.h> #include "prm.h" #include "pm.h" +#include "cm.h" #include "prm-regbits-34xx.h" +#include "control.h" #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ @@ -48,6 +59,8 @@ */ #define DEFAULT_TIMEOUT 0 +#define MAX_UART_HWMOD_NAME_LEN 16 + struct omap_uart_state { int num; int can_sleep; @@ -58,14 +71,21 @@ struct omap_uart_state { void __iomem *wk_en; u32 wk_mask; u32 padconf; + u32 dma_enabled; struct clk *ick; struct clk *fck; int clocked; - struct plat_serial8250_port *p; + int irq; + int regshift; + int irqflags; + void __iomem *membase; + resource_size_t mapbase; + struct list_head node; - struct platform_device pdev; + struct omap_hwmod *oh; + struct platform_device *pdev; u32 errata; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) @@ -83,75 +103,47 @@ struct omap_uart_state { }; static LIST_HEAD(uart_list); +static u8 num_uarts; -static struct plat_serial8250_port serial_platform_data0[] = { - { - .irq = 72, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } -}; +/* + * Since these idle/enable hooks are used in the idle path itself + * which has interrupts disabled, use the non-locking versions of + * the hwmod enable/disable functions. + */ +static int uart_idle_hwmod(struct omap_device *od) +{ + _omap_hwmod_idle(od->hwmods[0]); -static struct plat_serial8250_port serial_platform_data1[] = { - { - .irq = 73, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } -}; + return 0; +} -static struct plat_serial8250_port serial_platform_data2[] = { - { - .irq = 74, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } -}; +static int uart_enable_hwmod(struct omap_device *od) +{ + _omap_hwmod_enable(od->hwmods[0]); + + return 0; +} -static struct plat_serial8250_port serial_platform_data3[] = { +static struct omap_device_pm_latency omap_uart_latency[] = { { - .irq = 70, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { - .flags = 0 - } + .deactivate_func = uart_idle_hwmod, + .activate_func = uart_enable_hwmod, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, }; -void __init omap2_set_globals_uart(struct omap_globals *omap2_globals) -{ - serial_platform_data0[0].mapbase = omap2_globals->uart1_phys; - serial_platform_data1[0].mapbase = omap2_globals->uart2_phys; - serial_platform_data2[0].mapbase = omap2_globals->uart3_phys; - serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; -} - static inline unsigned int __serial_read_reg(struct uart_port *up, - int offset) + int offset) { offset <<= up->regshift; return (unsigned int)__raw_readb(up->membase + offset); } -static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, +static inline unsigned int serial_read_reg(struct omap_uart_state *uart, int offset) { - offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + offset <<= uart->regshift; + return (unsigned int)__raw_readb(uart->membase + offset); } static inline void __serial_write_reg(struct uart_port *up, int offset, @@ -161,11 +153,11 @@ static inline void __serial_write_reg(struct uart_port *up, int offset, __raw_writeb(value, up->membase + offset); } -static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, +static inline void serial_write_reg(struct omap_uart_state *uart, int offset, int value) { - offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + offset <<= uart->regshift; + __raw_writeb(value, uart->membase + offset); } /* @@ -173,14 +165,12 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, * properly. Note that the TX watermark initialization may not be needed * once the 8250.c watermark handling code is merged. */ + static inline void __init omap_uart_reset(struct omap_uart_state *uart) { - struct plat_serial8250_port *p = uart->p; - - serial_write_reg(p, UART_OMAP_MDR1, 0x07); - serial_write_reg(p, UART_OMAP_SCR, 0x08); - serial_write_reg(p, UART_OMAP_MDR1, 0x00); - serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0)); + serial_write_reg(uart, UART_OMAP_MDR1, 0x07); + serial_write_reg(uart, UART_OMAP_SCR, 0x08); + serial_write_reg(uart, UART_OMAP_MDR1, 0x00); } #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) @@ -197,24 +187,23 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart) static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, u8 fcr_val) { - struct plat_serial8250_port *p = uart->p; u8 timeout = 255; - serial_write_reg(p, UART_OMAP_MDR1, mdr1_val); + serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val); udelay(2); - serial_write_reg(p, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT | + serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); /* * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and * TX_FIFO_E bit is 1. */ - while (UART_LSR_THRE != (serial_read_reg(p, UART_LSR) & + while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) & (UART_LSR_THRE | UART_LSR_DR))) { timeout--; if (!timeout) { /* Should *never* happen. we warn and carry on */ - dev_crit(&uart->pdev.dev, "Errata i202: timedout %x\n", - serial_read_reg(p, UART_LSR)); + dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n", + serial_read_reg(uart, UART_LSR)); break; } udelay(1); @@ -224,23 +213,22 @@ static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, static void omap_uart_save_context(struct omap_uart_state *uart) { u16 lcr = 0; - struct plat_serial8250_port *p = uart->p; if (!enable_off_mode) return; - lcr = serial_read_reg(p, UART_LCR); - serial_write_reg(p, UART_LCR, 0xBF); - uart->dll = serial_read_reg(p, UART_DLL); - uart->dlh = serial_read_reg(p, UART_DLM); - serial_write_reg(p, UART_LCR, lcr); - uart->ier = serial_read_reg(p, UART_IER); - uart->sysc = serial_read_reg(p, UART_OMAP_SYSC); - uart->scr = serial_read_reg(p, UART_OMAP_SCR); - uart->wer = serial_read_reg(p, UART_OMAP_WER); - serial_write_reg(p, UART_LCR, 0x80); - uart->mcr = serial_read_reg(p, UART_MCR); - serial_write_reg(p, UART_LCR, lcr); + lcr = serial_read_reg(uart, UART_LCR); + serial_write_reg(uart, UART_LCR, 0xBF); + uart->dll = serial_read_reg(uart, UART_DLL); + uart->dlh = serial_read_reg(uart, UART_DLM); + serial_write_reg(uart, UART_LCR, lcr); + uart->ier = serial_read_reg(uart, UART_IER); + uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC); + uart->scr = serial_read_reg(uart, UART_OMAP_SCR); + uart->wer = serial_read_reg(uart, UART_OMAP_WER); + serial_write_reg(uart, UART_LCR, 0x80); + uart->mcr = serial_read_reg(uart, UART_MCR); + serial_write_reg(uart, UART_LCR, lcr); uart->context_valid = 1; } @@ -248,7 +236,6 @@ static void omap_uart_save_context(struct omap_uart_state *uart) static void omap_uart_restore_context(struct omap_uart_state *uart) { u16 efr = 0; - struct plat_serial8250_port *p = uart->p; if (!enable_off_mode) return; @@ -261,29 +248,30 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) omap_uart_mdr1_errataset(uart, 0x07, 0xA0); else - serial_write_reg(p, UART_OMAP_MDR1, 0x7); - serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ - efr = serial_read_reg(p, UART_EFR); - serial_write_reg(p, UART_EFR, UART_EFR_ECB); - serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(p, UART_IER, 0x0); - serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ - serial_write_reg(p, UART_DLL, uart->dll); - serial_write_reg(p, UART_DLM, uart->dlh); - serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ - serial_write_reg(p, UART_IER, uart->ier); - serial_write_reg(p, UART_LCR, 0x80); - serial_write_reg(p, UART_MCR, uart->mcr); - serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ - serial_write_reg(p, UART_EFR, efr); - serial_write_reg(p, UART_LCR, UART_LCR_WLEN8); - serial_write_reg(p, UART_OMAP_SCR, uart->scr); - serial_write_reg(p, UART_OMAP_WER, uart->wer); - serial_write_reg(p, UART_OMAP_SYSC, uart->sysc); + serial_write_reg(uart, UART_OMAP_MDR1, 0x7); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + efr = serial_read_reg(uart, UART_EFR); + serial_write_reg(uart, UART_EFR, UART_EFR_ECB); + serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(uart, UART_IER, 0x0); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(uart, UART_DLL, uart->dll); + serial_write_reg(uart, UART_DLM, uart->dlh); + serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */ + serial_write_reg(uart, UART_IER, uart->ier); + serial_write_reg(uart, UART_LCR, 0x80); + serial_write_reg(uart, UART_MCR, uart->mcr); + serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */ + serial_write_reg(uart, UART_EFR, efr); + serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8); + serial_write_reg(uart, UART_OMAP_SCR, uart->scr); + serial_write_reg(uart, UART_OMAP_WER, uart->wer); + serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc); if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) omap_uart_mdr1_errataset(uart, 0x00, 0xA1); else - serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ + /* UART 16x mode */ + serial_write_reg(uart, UART_OMAP_MDR1, 0x00); } #else static inline void omap_uart_save_context(struct omap_uart_state *uart) {} @@ -295,8 +283,7 @@ static inline void omap_uart_enable_clocks(struct omap_uart_state *uart) if (uart->clocked) return; - clk_enable(uart->ick); - clk_enable(uart->fck); + omap_device_enable(uart->pdev); uart->clocked = 1; omap_uart_restore_context(uart); } @@ -310,8 +297,7 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) omap_uart_save_context(uart); uart->clocked = 0; - clk_disable(uart->ick); - clk_disable(uart->fck); + omap_device_idle(uart->pdev); } static void omap_uart_enable_wakeup(struct omap_uart_state *uart) @@ -349,18 +335,24 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart) } static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, - int enable) + int enable) { - struct plat_serial8250_port *p = uart->p; - u16 sysc; + u8 idlemode; - sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7; - if (enable) - sysc |= 0x2 << 3; - else - sysc |= 0x1 << 3; + if (enable) { + /** + * Errata 2.15: [UART]:Cannot Acknowledge Idle Requests + * in Smartidle Mode When Configured for DMA Operations. + */ + if (uart->dma_enabled) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = HWMOD_IDLEMODE_SMART; + } else { + idlemode = HWMOD_IDLEMODE_NO; + } - serial_write_reg(p, UART_OMAP_SYSC, sysc); + omap_hwmod_set_slave_idlemode(uart->oh, idlemode); } static void omap_uart_block_sleep(struct omap_uart_state *uart) @@ -377,7 +369,7 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) static void omap_uart_allow_sleep(struct omap_uart_state *uart) { - if (device_may_wakeup(&uart->pdev.dev)) + if (device_may_wakeup(&uart->pdev->dev)) omap_uart_enable_wakeup(uart); else omap_uart_disable_wakeup(uart); @@ -472,6 +464,7 @@ int omap_uart_can_sleep(void) * UART will not idle or sleep for its timeout period. * **/ +/* static int first_interrupt; */ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) { struct omap_uart_state *uart = dev_id; @@ -483,7 +476,6 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) static void omap_uart_idle_init(struct omap_uart_state *uart) { - struct plat_serial8250_port *p = uart->p; int ret; uart->can_sleep = 0; @@ -495,7 +487,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) omap_uart_smart_idle_enable(uart, 0); if (cpu_is_omap34xx()) { - u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD; + u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD; u32 wk_mask = 0; u32 padconf = 0; @@ -514,6 +506,10 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) wk_mask = OMAP3430_ST_UART3_MASK; padconf = 0x19e; break; + case 3: + wk_mask = OMAP3630_ST_UART4_MASK; + padconf = 0x0d2; + break; } uart->wk_mask = wk_mask; uart->padconf = padconf; @@ -546,9 +542,9 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->padconf = 0; } - p->irqflags |= IRQF_SHARED; - ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, - "serial idle", (void *)uart); + uart->irqflags |= IRQF_SHARED; + ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); WARN_ON(ret); } @@ -558,11 +554,17 @@ void omap_uart_enable_irqs(int enable) struct omap_uart_state *uart; list_for_each_entry(uart, &uart_list, node) { - if (enable) - ret = request_irq(uart->p->irq, omap_uart_interrupt, - IRQF_SHARED, "serial idle", (void *)uart); - else - free_irq(uart->p->irq, (void *)uart); + if (enable) { + pm_runtime_put_sync(&uart->pdev->dev); + ret = request_threaded_irq(uart->irq, NULL, + omap_uart_interrupt, + IRQF_SHARED, + "serial idle", + (void *)uart); + } else { + pm_runtime_get_noresume(&uart->pdev->dev); + free_irq(uart->irq, (void *)uart); + } } } @@ -570,10 +572,9 @@ static ssize_t sleep_timeout_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_uart_state *uart = container_of(pdev, - struct omap_uart_state, pdev); + struct platform_device *pdev = to_platform_device(dev); + struct omap_device *odev = to_omap_device(pdev); + struct omap_uart_state *uart = odev->hwmods[0]->dev_attr; return sprintf(buf, "%u\n", uart->timeout / HZ); } @@ -582,10 +583,9 @@ static ssize_t sleep_timeout_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_uart_state *uart = container_of(pdev, - struct omap_uart_state, pdev); + struct platform_device *pdev = to_platform_device(dev); + struct omap_device *odev = to_omap_device(pdev); + struct omap_uart_state *uart = odev->hwmods[0]->dev_attr; unsigned int value; if (sscanf(buf, "%u", &value) != 1) { @@ -608,48 +608,11 @@ static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, #define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +static void omap_uart_block_sleep(struct omap_uart_state *uart) {} #define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct omap_uart_state omap_uart[] = { - { - .pdev = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data0, - }, - }, - }, { - .pdev = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = serial_platform_data1, - }, - }, - }, { - .pdev = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = serial_platform_data2, - }, - }, - }, -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - { - .pdev = { - .name = "serial8250", - .id = 3, - .dev = { - .platform_data = serial_platform_data3, - }, - }, - }, -#endif -}; - +#ifndef CONFIG_SERIAL_OMAP /* * Override the default 8250 read handler: mem_serial_in() * Empty RX fifo read causes an abort on omap3630 and omap4 @@ -682,71 +645,44 @@ static void serial_out_override(struct uart_port *up, int offset, int value) } __serial_write_reg(up, offset, value); } +#endif + void __init omap_serial_early_init(void) { - int i, nr_ports; - char name[16]; + int i = 0; - if (!(cpu_is_omap3630() || cpu_is_omap4430())) - nr_ports = 3; - else - nr_ports = ARRAY_SIZE(omap_uart); + do { + char oh_name[MAX_UART_HWMOD_NAME_LEN]; + struct omap_hwmod *oh; + struct omap_uart_state *uart; - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ + snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN, + "uart%d", i + 1); + oh = omap_hwmod_lookup(oh_name); + if (!oh) + break; - for (i = 0; i < nr_ports; i++) { - struct omap_uart_state *uart = &omap_uart[i]; - struct platform_device *pdev = &uart->pdev; - struct device *dev = &pdev->dev; - struct plat_serial8250_port *p = dev->platform_data; + uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL); + if (WARN_ON(!uart)) + return; + + uart->oh = oh; + uart->num = i++; + list_add_tail(&uart->node, &uart_list); + num_uarts++; - /* Don't map zero-based physical address */ - if (p->mapbase == 0) { - dev_warn(dev, "no physical address for uart#%d," - " so skipping early_init...\n", i); - continue; - } /* - * Module 4KB + L4 interconnect 4KB - * Static mapping, never released + * NOTE: omap_hwmod_init() has not yet been called, + * so no hwmod functions will work yet. */ - p->membase = ioremap(p->mapbase, SZ_8K); - if (!p->membase) { - dev_err(dev, "ioremap failed for uart%i\n", i + 1); - continue; - } - - sprintf(name, "uart%d_ick", i + 1); - uart->ick = clk_get(NULL, name); - if (IS_ERR(uart->ick)) { - dev_err(dev, "Could not get uart%d_ick\n", i + 1); - uart->ick = NULL; - } - - sprintf(name, "uart%d_fck", i+1); - uart->fck = clk_get(NULL, name); - if (IS_ERR(uart->fck)) { - dev_err(dev, "Could not get uart%d_fck\n", i + 1); - uart->fck = NULL; - } - - /* FIXME: Remove this once the clkdev is ready */ - if (!cpu_is_omap44xx()) { - if (!uart->ick || !uart->fck) - continue; - } - - uart->num = i; - p->private_data = uart; - uart->p = p; - if (cpu_is_omap44xx()) - p->irq += 32; - } + /* + * During UART early init, device need to be probed + * to determine SoC specific init before omap_device + * is ready. Therefore, don't allow idle here + */ + uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; + } while (1); } /** @@ -763,53 +699,135 @@ void __init omap_serial_early_init(void) void __init omap_serial_init_port(int port) { struct omap_uart_state *uart; - struct platform_device *pdev; - struct device *dev; - - BUG_ON(port < 0); - BUG_ON(port >= ARRAY_SIZE(omap_uart)); - - uart = &omap_uart[port]; - pdev = &uart->pdev; - dev = &pdev->dev; + struct omap_hwmod *oh; + struct omap_device *od; + void *pdata = NULL; + u32 pdata_size = 0; + char *name; +#ifndef CONFIG_SERIAL_OMAP + struct plat_serial8250_port ports[2] = { + {}, + {.flags = 0}, + }; + struct plat_serial8250_port *p = &ports[0]; +#else + struct omap_uart_port_info omap_up; +#endif - /* Don't proceed if there's no clocks available */ - if (unlikely(!uart->ick || !uart->fck)) { - WARN(1, "%s: can't init uart%d, no clocks available\n", - kobject_name(&dev->kobj), port); + if (WARN_ON(port < 0)) + return; + if (WARN_ON(port >= num_uarts)) return; - } - - omap_uart_enable_clocks(uart); - - omap_uart_reset(uart); - omap_uart_idle_init(uart); - list_add_tail(&uart->node, &uart_list); + list_for_each_entry(uart, &uart_list, node) + if (port == uart->num) + break; - if (WARN_ON(platform_device_register(pdev))) - return; + oh = uart->oh; + uart->dma_enabled = 0; +#ifndef CONFIG_SERIAL_OMAP + name = "serial8250"; - if ((cpu_is_omap34xx() && uart->padconf) || - (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(dev, true); - DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); - } + /* + * !! 8250 driver does not use standard IORESOURCE* It + * has it's own custom pdata that can be taken from + * the hwmod resource data. But, this needs to be + * done after the build. + * + * ?? does it have to be done before the register ?? + * YES, because platform_device_data_add() copies + * pdata, it does not use a pointer. + */ + p->flags = UPF_BOOT_AUTOCONF; + p->iotype = UPIO_MEM; + p->regshift = 2; + p->uartclk = OMAP24XX_BASE_BAUD * 16; + p->irq = oh->mpu_irqs[0].irq; + p->mapbase = oh->slaves[0]->addr->pa_start; + p->membase = omap_hwmod_get_mpu_rt_va(oh); + p->irqflags = IRQF_SHARED; + p->private_data = uart; /* * omap44xx: Never read empty UART fifo * omap3xxx: Never read empty UART fifo on UARTs * with IP rev >=0x52 */ + uart->regshift = p->regshift; + uart->membase = p->membase; if (cpu_is_omap44xx()) uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; - else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF) >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) { - uart->p->serial_in = serial_in_override; - uart->p->serial_out = serial_out_override; + p->serial_in = serial_in_override; + p->serial_out = serial_out_override; + } + + pdata = &ports[0]; + pdata_size = 2 * sizeof(struct plat_serial8250_port); +#else + + name = DRIVER_NAME; + + omap_up.dma_enabled = uart->dma_enabled; + omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; + omap_up.mapbase = oh->slaves[0]->addr->pa_start; + omap_up.membase = omap_hwmod_get_mpu_rt_va(oh); + omap_up.irqflags = IRQF_SHARED; + omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + + pdata = &omap_up; + pdata_size = sizeof(struct omap_uart_port_info); +#endif + + if (WARN_ON(!oh)) + return; + + od = omap_device_build(name, uart->num, oh, pdata, pdata_size, + omap_uart_latency, + ARRAY_SIZE(omap_uart_latency), false); + WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n", + name, oh->name); + + uart->irq = oh->mpu_irqs[0].irq; + uart->regshift = 2; + uart->mapbase = oh->slaves[0]->addr->pa_start; + uart->membase = omap_hwmod_get_mpu_rt_va(oh); + uart->pdev = &od->pdev; + + oh->dev_attr = uart; + + /* + * Because of early UART probing, UART did not get idled + * on init. Now that omap_device is ready, ensure full idle + * before doing omap_device_enable(). + */ + omap_hwmod_idle(uart->oh); + + omap_device_enable(uart->pdev); + omap_uart_idle_init(uart); + omap_uart_reset(uart); + omap_hwmod_enable_wakeup(uart->oh); + omap_device_idle(uart->pdev); + + /* + * Need to block sleep long enough for interrupt driven + * driver to start. Console driver is in polling mode + * so device needs to be kept enabled while polling driver + * is in use. + */ + if (uart->timeout) + uart->timeout = (30 * HZ); + omap_uart_block_sleep(uart); + uart->timeout = DEFAULT_TIMEOUT; + + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(&od->pdev.dev, true); + DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout); } /* Enable the MDR1 errata for OMAP3 */ @@ -826,13 +844,8 @@ void __init omap_serial_init_port(int port) */ void __init omap_serial_init(void) { - int i, nr_ports; - - if (!(cpu_is_omap3630() || cpu_is_omap4430())) - nr_ports = 3; - else - nr_ports = ARRAY_SIZE(omap_uart); + struct omap_uart_state *uart; - for (i = 0; i < nr_ports; i++) - omap_serial_init_port(i); + list_for_each_entry(uart, &uart_list, node) + omap_serial_init_port(uart->num); } diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index ba53191ae4c5..2fb205a7f285 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -27,11 +27,11 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <mach/io.h> -#include <plat/control.h> #include "cm.h" #include "prm.h" #include "sdrc.h" +#include "control.h" #define SDRC_SCRATCHPAD_SEM_V 0xfa00291c diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index de99ba2a57ab..3637274af5be 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -129,8 +129,11 @@ ENTRY(omap3_sram_configure_core_dpll) ldr r4, [sp, #80] str r4, omap_sdrc_mr_1_val skip_cs1_params: + mrc p15, 0, r8, c1, c0, 0 @ read ctrl register + bic r10, r8, #0x800 @ clear Z-bit, disable branch prediction + mcr p15, 0, r10, c1, c0, 0 @ write ctrl register dsb @ flush buffered writes to interconnect - + isb @ prevent speculative exec past here cmp r3, #1 @ if increasing SDRC clk rate, bleq configure_sdrc @ program the SDRC regs early (for RFR) cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state @@ -148,6 +151,7 @@ skip_cs1_params: beq return_to_sdram @ return to SDRAM code, otherwise, bl configure_sdrc @ reprogram SDRC regs now return_to_sdram: + mcr p15, 0, r8, c1, c0, 0 @ restore ctrl register isb @ prevent speculative exec past here mov r0, #0 @ return value ldmfd sp!, {r1-r12, pc} @ restore regs and return diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 74fbed8491f2..e13c29eecf2b 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -40,6 +40,8 @@ #include <plat/dmtimer.h> #include <asm/localtimer.h> +#include "timer-gp.h" + /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 @@ -228,8 +230,10 @@ static void __init omap2_gp_clocksource_init(void) static void __init omap2_gp_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); - BUG_ON(!twd_base); + if (cpu_is_omap44xx()) { + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); + BUG_ON(!twd_base); + } #endif omap_dm_timer_init(); diff --git a/arch/arm/plat-omap/include/plat/timer-gp.h b/arch/arm/mach-omap2/timer-gp.h index c88d346b59d9..5c1072c6783b 100644 --- a/arch/arm/plat-omap/include/plat/timer-gp.h +++ b/arch/arm/mach-omap2/timer-gp.h @@ -11,7 +11,6 @@ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H -int __init omap2_gp_clockevent_set_gptimer(u8 id); +extern int __init omap2_gp_clockevent_set_gptimer(u8 id); #endif - diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c index a216d88b04b5..1481078763b8 100644 --- a/arch/arm/mach-omap2/usb-fs.c +++ b/arch/arm/mach-omap2/usb-fs.c @@ -29,18 +29,18 @@ #include <asm/irq.h> -#include <plat/control.h> #include <plat/usb.h> #include <plat/board.h> +#include "control.h" +#include "mux.h" + #define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN #define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO #define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO #define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN #define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG -#include "mux.h" - #if defined(CONFIG_ARCH_OMAP2) #ifdef CONFIG_USB_GADGET_OMAP diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h index 2ad398378aed..31b65ee07b0b 100644 --- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h +++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 2fa38df28414..07c08151dfe6 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -259,6 +259,7 @@ struct mmci_platform_data realview_mmc0_plat_data = { .status = realview_mmc_status, .gpio_wp = 17, .gpio_cd = 16, + .cd_invert = true, }; struct mmci_platform_data realview_mmc1_plat_data = { @@ -266,6 +267,7 @@ struct mmci_platform_data realview_mmc1_plat_data = { .status = realview_mmc_status, .gpio_wp = 19, .gpio_cd = 18, + .cd_invert = true, }; /* diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index dd53892d44a7..d3cd265cb058 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -1,16 +1,8 @@ #ifndef ASMARM_ARCH_SMP_H #define ASMARM_ARCH_SMP_H - #include <asm/hardware/gic.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) +#include <asm/smp_mpidr.h> /* * We use IRQ1 as the IPI diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h index 9a96fd69e705..3bcd86fadb81 100644 --- a/arch/arm/mach-rpc/include/mach/vmalloc.h +++ b/arch/arm/mach-rpc/include/mach/vmalloc.h @@ -7,4 +7,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define VMALLOC_END (PAGE_OFFSET + 0x1c000000) +#define VMALLOC_END 0xdc000000 diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 8cdeb14af592..8aa2f1902a94 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -30,7 +30,7 @@ static void h1940bt_enable(int on) { if (on) { /* Power on the chip */ - h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); + gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1); /* Reset the chip */ mdelay(10); @@ -43,7 +43,7 @@ static void h1940bt_enable(int on) mdelay(10); gpio_set_value(S3C2410_GPH(1), 0); mdelay(10); - h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); + gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0); } } @@ -64,7 +64,14 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev)); if (ret) { - dev_err(&pdev->dev, "could not get GPH1\n");\ + dev_err(&pdev->dev, "could not get GPH1\n"); + return ret; + } + + ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev)); + if (ret) { + gpio_free(S3C2410_GPH(1)); + dev_err(&pdev->dev, "could not get BT_POWER\n"); return ret; } diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h index d8a832729a8a..97e42bfce81e 100644 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h @@ -14,51 +14,30 @@ #ifndef __ASM_ARCH_H1940_LATCH_H #define __ASM_ARCH_H1940_LATCH_H +#include <mach/gpio.h> -#ifndef __ASSEMBLY__ -#define H1940_LATCH ((void __force __iomem *)0xF8000000) -#else -#define H1940_LATCH 0xF8000000 -#endif - -#define H1940_PA_LATCH (S3C2410_CS2) +#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) /* SD layer latch */ -#define H1940_LATCH_SDQ1 (1<<16) -#define H1940_LATCH_LCD_P1 (1<<17) -#define H1940_LATCH_LCD_P2 (1<<18) -#define H1940_LATCH_LCD_P3 (1<<19) -#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */ -#define H1940_LATCH_LED_RED (1<<21) -#define H1940_LATCH_SDQ7 (1<<22) -#define H1940_LATCH_USB_DP (1<<23) +#define H1940_LATCH_LCD_P0 H1940_LATCH_GPIO(0) +#define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1) +#define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2) +#define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3) +#define H1940_LATCH_MAX1698_nSHUTDOWN H1940_LATCH_GPIO(4) +#define H1940_LATCH_LED_RED H1940_LATCH_GPIO(5) +#define H1940_LATCH_SDQ7 H1940_LATCH_GPIO(6) +#define H1940_LATCH_USB_DP H1940_LATCH_GPIO(7) /* CPU layer latch */ -#define H1940_LATCH_UDA_POWER (1<<24) -#define H1940_LATCH_AUDIO_POWER (1<<25) -#define H1940_LATCH_SM803_ENABLE (1<<26) -#define H1940_LATCH_LCD_P4 (1<<27) -#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */ -#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */ -#define H1940_LATCH_LED_GREEN (1<<30) -#define H1940_LATCH_LED_FLASH (1<<31) - -/* default settings */ - -#define H1940_LATCH_DEFAULT \ - H1940_LATCH_LCD_P4 | \ - H1940_LATCH_SM803_ENABLE | \ - H1940_LATCH_SDQ1 | \ - H1940_LATCH_LCD_P1 | \ - H1940_LATCH_LCD_P2 | \ - H1940_LATCH_LCD_P3 | \ - H1940_LATCH_MAX1698_nSHUTDOWN | \ - H1940_LATCH_CPUQ5 - -/* control functions */ - -extern void h1940_latch_control(unsigned int clear, unsigned int set); +#define H1940_LATCH_UDA_POWER H1940_LATCH_GPIO(8) +#define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9) +#define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10) +#define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11) +#define H1940_LATCH_SD_POWER H1940_LATCH_GPIO(12) +#define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13) +#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14) +#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15) #endif /* __ASM_ARCH_H1940_LATCH_H */ diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 3ba3bab139d0..974c6e4fb6ad 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -59,6 +59,12 @@ #include <plat/mci.h> #include <plat/ts.h> +#define H1940_LATCH ((void __force __iomem *)0xF8000000) + +#define H1940_PA_LATCH S3C2410_CS2 + +#define H1940_LATCH_BIT(x) (1 << ((x) + 16 - S3C_GPIO_END)) + static struct map_desc h1940_iodesc[] __initdata = { [0] = { .virtual = (unsigned long)H1940_LATCH, @@ -100,9 +106,9 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = { /* Board control latch control */ -static unsigned int latch_state = H1940_LATCH_DEFAULT; +static unsigned int latch_state; -void h1940_latch_control(unsigned int clear, unsigned int set) +static void h1940_latch_control(unsigned int clear, unsigned int set) { unsigned long flags; @@ -116,7 +122,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set) local_irq_restore(flags); } -EXPORT_SYMBOL_GPL(h1940_latch_control); +static inline int h1940_gpiolib_to_latch(int offset) +{ + return 1 << (offset + 16); +} + +static void h1940_gpiolib_latch_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + int latch_bit = h1940_gpiolib_to_latch(offset); + + h1940_latch_control(value ? 0 : latch_bit, + value ? latch_bit : 0); +} + +static int h1940_gpiolib_latch_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + h1940_gpiolib_latch_set(chip, offset, value); + return 0; +} + +static int h1940_gpiolib_latch_get(struct gpio_chip *chip, + unsigned offset) +{ + return (latch_state >> (offset + 16)) & 1; +} + +struct gpio_chip h1940_latch_gpiochip = { + .base = H1940_LATCH_GPIO(0), + .owner = THIS_MODULE, + .label = "H1940_LATCH", + .ngpio = 16, + .direction_output = h1940_gpiolib_latch_output, + .set = h1940_gpiolib_latch_set, + .get = h1940_gpiolib_latch_get, +}; static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) { @@ -125,10 +166,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - h1940_latch_control(0, H1940_LATCH_USB_DP); + gpio_set_value(H1940_LATCH_USB_DP, 1); break; case S3C2410_UDC_P_DISABLE : - h1940_latch_control(H1940_LATCH_USB_DP, 0); + gpio_set_value(H1940_LATCH_USB_DP, 0); break; case S3C2410_UDC_P_RESET : break; @@ -199,10 +240,25 @@ static struct platform_device h1940_device_bluetooth = { .id = -1, }; +static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd) +{ + switch (power_mode) { + case MMC_POWER_OFF: + gpio_set_value(H1940_LATCH_SD_POWER, 0); + break; + case MMC_POWER_UP: + case MMC_POWER_ON: + gpio_set_value(H1940_LATCH_SD_POWER, 1); + break; + default: + break; + }; +} + static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = { .gpio_detect = S3C2410_GPF(5), .gpio_wprotect = S3C2410_GPH(8), - .set_power = NULL, + .set_power = h1940_set_mmc_power, .ocr_avail = MMC_VDD_32_33, }; @@ -213,15 +269,32 @@ static int h1940_backlight_init(struct device *dev) gpio_direction_output(S3C2410_GPB(0), 0); s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); + gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1); return 0; } +static int h1940_backlight_notify(struct device *dev, int brightness) +{ + if (!brightness) { + gpio_direction_output(S3C2410_GPB(0), 1); + gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0); + } else { + gpio_direction_output(S3C2410_GPB(0), 0); + s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); + gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1); + } + return brightness; +} + static void h1940_backlight_exit(struct device *dev) { gpio_direction_output(S3C2410_GPB(0), 1); + gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0); } + static struct platform_pwm_backlight_data backlight_data = { .pwm_id = 0, .max_brightness = 100, @@ -229,6 +302,7 @@ static struct platform_pwm_backlight_data backlight_data = { /* tcnt = 0x31 */ .pwm_period_ns = 36296, .init = h1940_backlight_init, + .notify = h1940_backlight_notify, .exit = h1940_backlight_exit, }; @@ -247,19 +321,37 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd, int value; if (!power) { - /* set to 3ec */ - gpio_direction_output(S3C2410_GPC(0), 0); + gpio_set_value(S3C2410_GPC(0), 0); /* wait for 3ac */ do { value = gpio_get_value(S3C2410_GPC(6)); } while (value); - /* set to 38c */ - gpio_direction_output(S3C2410_GPC(5), 0); + + gpio_set_value(H1940_LATCH_LCD_P2, 0); + gpio_set_value(H1940_LATCH_LCD_P3, 0); + gpio_set_value(H1940_LATCH_LCD_P4, 0); + + gpio_direction_output(S3C2410_GPC(1), 0); + gpio_direction_output(S3C2410_GPC(4), 0); + + gpio_set_value(H1940_LATCH_LCD_P1, 0); + gpio_set_value(H1940_LATCH_LCD_P0, 0); + + gpio_set_value(S3C2410_GPC(5), 0); + } else { - /* Set to 3ac */ - gpio_direction_output(S3C2410_GPC(5), 1); - /* Set to 3ad */ - gpio_direction_output(S3C2410_GPC(0), 1); + gpio_set_value(H1940_LATCH_LCD_P0, 1); + gpio_set_value(H1940_LATCH_LCD_P1, 1); + + s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2)); + + gpio_set_value(S3C2410_GPC(5), 1); + gpio_set_value(S3C2410_GPC(0), 1); + + gpio_set_value(H1940_LATCH_LCD_P3, 1); + gpio_set_value(H1940_LATCH_LCD_P2, 1); + gpio_set_value(H1940_LATCH_LCD_P4, 1); } } @@ -303,6 +395,10 @@ static void __init h1940_map_io(void) memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif s3c_pm_init(); + + /* Add latch gpio chip, set latch initial value */ + h1940_latch_control(0, 0); + WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); } /* H1940 and RX3715 need to reserve this for suspend */ @@ -340,10 +436,33 @@ static void __init h1940_init(void) writel(tmp, S3C2410_UPLLCON); gpio_request(S3C2410_GPC(0), "LCD power"); + gpio_request(S3C2410_GPC(1), "LCD power"); + gpio_request(S3C2410_GPC(4), "LCD power"); gpio_request(S3C2410_GPC(5), "LCD power"); gpio_request(S3C2410_GPC(6), "LCD power"); - + gpio_request(H1940_LATCH_LCD_P0, "LCD power"); + gpio_request(H1940_LATCH_LCD_P1, "LCD power"); + gpio_request(H1940_LATCH_LCD_P2, "LCD power"); + gpio_request(H1940_LATCH_LCD_P3, "LCD power"); + gpio_request(H1940_LATCH_LCD_P4, "LCD power"); + gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power"); + gpio_direction_output(S3C2410_GPC(0), 0); + gpio_direction_output(S3C2410_GPC(1), 0); + gpio_direction_output(S3C2410_GPC(4), 0); + gpio_direction_output(S3C2410_GPC(5), 0); gpio_direction_input(S3C2410_GPC(6)); + gpio_direction_output(H1940_LATCH_LCD_P0, 0); + gpio_direction_output(H1940_LATCH_LCD_P1, 0); + gpio_direction_output(H1940_LATCH_LCD_P2, 0); + gpio_direction_output(H1940_LATCH_LCD_P3, 0); + gpio_direction_output(H1940_LATCH_LCD_P4, 0); + gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0); + + gpio_request(H1940_LATCH_USB_DP, "USB pullup"); + gpio_direction_output(H1940_LATCH_USB_DP, 0); + + gpio_request(H1940_LATCH_SD_POWER, "SD power"); + gpio_direction_output(H1940_LATCH_SD_POWER, 0); platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); } diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 142d1f921176..6d676a798226 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -25,8 +25,12 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/sysdev.h> +#include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/pwm.h> +#include <linux/s3c_adc_battery.h> +#include <linux/leds.h> +#include <linux/i2c.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -55,6 +59,8 @@ #include <plat/irq.h> #include <plat/ts.h> +#include <sound/uda1380.h> + #define LCD_PWM_PERIOD 192960 #define LCD_PWM_DUTY 127353 @@ -127,6 +133,193 @@ static struct s3c2410fb_display rx1950_display = { }; +static int power_supply_init(struct device *dev) +{ + return gpio_request(S3C2410_GPF(2), "cable plugged"); +} + +static int rx1950_is_ac_online(void) +{ + return !gpio_get_value(S3C2410_GPF(2)); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(S3C2410_GPF(2)); +} + +static char *rx1950_supplicants[] = { + "main-battery" +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = rx1950_is_ac_online, + .exit = power_supply_exit, + .supplied_to = rx1950_supplicants, + .num_supplicants = ARRAY_SIZE(rx1950_supplicants), +}; + +static struct resource power_supply_resources[] = { + [0] = { + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | + IORESOURCE_IRQ_HIGHEDGE, + .start = IRQ_EINT2, + .end = IRQ_EINT2, + }, +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = + &power_supply_info, + }, + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), +}; + +static const struct s3c_adc_bat_thresh bat_lut_noac[] = { + { .volt = 4100, .cur = 156, .level = 100}, + { .volt = 4050, .cur = 156, .level = 95}, + { .volt = 4025, .cur = 141, .level = 90}, + { .volt = 3995, .cur = 144, .level = 85}, + { .volt = 3957, .cur = 162, .level = 80}, + { .volt = 3931, .cur = 147, .level = 75}, + { .volt = 3902, .cur = 147, .level = 70}, + { .volt = 3863, .cur = 153, .level = 65}, + { .volt = 3838, .cur = 150, .level = 60}, + { .volt = 3800, .cur = 153, .level = 55}, + { .volt = 3765, .cur = 153, .level = 50}, + { .volt = 3748, .cur = 172, .level = 45}, + { .volt = 3740, .cur = 153, .level = 40}, + { .volt = 3714, .cur = 175, .level = 35}, + { .volt = 3710, .cur = 156, .level = 30}, + { .volt = 3963, .cur = 156, .level = 25}, + { .volt = 3672, .cur = 178, .level = 20}, + { .volt = 3651, .cur = 178, .level = 15}, + { .volt = 3629, .cur = 178, .level = 10}, + { .volt = 3612, .cur = 162, .level = 5}, + { .volt = 3605, .cur = 162, .level = 0}, +}; + +static const struct s3c_adc_bat_thresh bat_lut_acin[] = { + { .volt = 4200, .cur = 0, .level = 100}, + { .volt = 4190, .cur = 0, .level = 99}, + { .volt = 4178, .cur = 0, .level = 95}, + { .volt = 4110, .cur = 0, .level = 70}, + { .volt = 4076, .cur = 0, .level = 65}, + { .volt = 4046, .cur = 0, .level = 60}, + { .volt = 4021, .cur = 0, .level = 55}, + { .volt = 3999, .cur = 0, .level = 50}, + { .volt = 3982, .cur = 0, .level = 45}, + { .volt = 3965, .cur = 0, .level = 40}, + { .volt = 3957, .cur = 0, .level = 35}, + { .volt = 3948, .cur = 0, .level = 30}, + { .volt = 3936, .cur = 0, .level = 25}, + { .volt = 3927, .cur = 0, .level = 20}, + { .volt = 3906, .cur = 0, .level = 15}, + { .volt = 3880, .cur = 0, .level = 10}, + { .volt = 3829, .cur = 0, .level = 5}, + { .volt = 3820, .cur = 0, .level = 0}, +}; + +int rx1950_bat_init(void) +{ + int ret; + + ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1"); + if (ret) + goto err_gpio1; + ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2"); + if (ret) + goto err_gpio2; + + return 0; + +err_gpio2: + gpio_free(S3C2410_GPJ(2)); +err_gpio1: + return ret; +} + +void rx1950_bat_exit(void) +{ + gpio_free(S3C2410_GPJ(2)); + gpio_free(S3C2410_GPJ(3)); +} + +void rx1950_enable_charger(void) +{ + gpio_direction_output(S3C2410_GPJ(2), 1); + gpio_direction_output(S3C2410_GPJ(3), 1); +} + +void rx1950_disable_charger(void) +{ + gpio_direction_output(S3C2410_GPJ(2), 0); + gpio_direction_output(S3C2410_GPJ(3), 0); +} + +static struct gpio_led rx1950_leds_desc[] = { + { + .name = "Green", + .default_trigger = "main-battery-charging-or-full", + .gpio = S3C2410_GPA(6), + }, + { + .name = "Red", + .default_trigger = "main-battery-full", + .gpio = S3C2410_GPA(7), + }, + { + .name = "Blue", + .default_trigger = "rx1950-acx-mem", + .gpio = S3C2410_GPA(11), + }, +}; + +static struct gpio_led_platform_data rx1950_leds_pdata = { + .num_leds = ARRAY_SIZE(rx1950_leds_desc), + .leds = rx1950_leds_desc, +}; + +static struct platform_device rx1950_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &rx1950_leds_pdata, + }, +}; + +static struct s3c_adc_bat_pdata rx1950_bat_cfg = { + .init = rx1950_bat_init, + .exit = rx1950_bat_exit, + .enable_charger = rx1950_enable_charger, + .disable_charger = rx1950_disable_charger, + .gpio_charge_finished = S3C2410_GPF(3), + .lut_noac = bat_lut_noac, + .lut_noac_cnt = ARRAY_SIZE(bat_lut_noac), + .lut_acin = bat_lut_acin, + .lut_acin_cnt = ARRAY_SIZE(bat_lut_acin), + .volt_channel = 0, + .current_channel = 1, + .volt_mult = 4235, + .current_mult = 2900, + .internal_impedance = 200, +}; + +static struct platform_device rx1950_battery = { + .name = "s3c-adc-battery", + .id = -1, + .dev = { + .parent = &s3c_device_adc.dev, + .platform_data = &rx1950_bat_cfg, + }, +}; + static struct s3c2410fb_mach_info rx1950_lcd_cfg = { .displays = &rx1950_display, .num_displays = 1, @@ -481,11 +674,17 @@ static struct platform_device rx1950_device_gpiokeys = { .dev.platform_data = &rx1950_gpio_keys_data, }; -static struct s3c2410_platform_i2c rx1950_i2c_data = { - .flags = 0, - .slave_addr = 0x42, - .frequency = 400 * 1000, - .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, +static struct uda1380_platform_data uda1380_info = { + .gpio_power = S3C2410_GPJ(0), + .gpio_reset = S3C2410_GPD(0), + .dac_clk = UDA1380_DAC_CLK_SYSCLK, +}; + +static struct i2c_board_info rx1950_i2c_devices[] = { + { + I2C_BOARD_INFO("uda1380", 0x1a), + .platform_data = &uda1380_info, + }, }; static struct platform_device *rx1950_devices[] __initdata = { @@ -493,6 +692,7 @@ static struct platform_device *rx1950_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, + &s3c_device_pcm, &s3c_device_usbgadget, &s3c_device_rtc, &s3c_device_nand, @@ -503,6 +703,9 @@ static struct platform_device *rx1950_devices[] __initdata = { &s3c_device_timer[1], &rx1950_backlight, &rx1950_device_gpiokeys, + &power_supply, + &rx1950_battery, + &rx1950_leds, }; static struct clk *rx1950_clocks[] __initdata = { @@ -538,7 +741,7 @@ static void __init rx1950_init_machine(void) s3c24xx_udc_set_platdata(&rx1950_udc_cfg); s3c24xx_ts_set_platdata(&rx1950_ts_cfg); s3c24xx_mci_set_platdata(&rx1950_mmc_cfg); - s3c_i2c0_set_platdata(&rx1950_i2c_data); + s3c_i2c0_set_platdata(NULL); s3c_nand_set_platdata(&rx1950_nand_info); /* Turn off suspend on both USB ports, and switch the @@ -569,6 +772,9 @@ static void __init rx1950_init_machine(void) WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power")); platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); + + i2c_register_board_info(0, rx1950_i2c_devices, + ARRAY_SIZE(rx1950_i2c_devices)); } /* H1940 and RX3715 need to reserve this for suspend */ diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c index 300dee4a667b..fd99a82e82c4 100644 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ b/arch/arm/mach-s3c64xx/gpiolib.c @@ -195,11 +195,6 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { .get_pull = s3c_gpio_getpull_updown, }; -int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin) -{ - return IRQ_EINT(0) + pin; -} - static struct s3c_gpio_chip gpio_2bit[] = { { .base = S3C64XX_GPF_BASE, @@ -227,12 +222,13 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }, { .base = S3C64XX_GPN_BASE, + .irq_base = IRQ_EINT(0), .config = &gpio_2bit_cfg_eint10, .chip = { .base = S3C64XX_GPN(0), .ngpio = S3C64XX_GPIO_N_NR, .label = "GPN", - .to_irq = s3c64xx_gpio2int_gpn, + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = S3C64XX_GPO_BASE, diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 3a9639bc3d9b..cb1ebeb08763 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -136,7 +136,7 @@ static struct platform_device smartq_usb_otg_vbus_dev = { .dev.platform_data = &smartq_usb_otg_vbus_pdata, }; -static int __init smartq_bl_init(struct device *dev) +static int smartq_bl_init(struct device *dev) { s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index a4d59b076e3d..235e43928cb8 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -32,7 +32,7 @@ #include "mach-smartq.h" -static struct gpio_led smartq5_leds[] __initdata = { +static struct gpio_led smartq5_leds[] = { { .name = "smartq5:green", .active_low = 1, diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index e50a7d781732..78a58c351f0a 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -32,7 +32,7 @@ #include "mach-smartq.h" -static struct gpio_led smartq7_leds[] __initdata = { +static struct gpio_led smartq7_leds[] = { { .name = "smartq7:red", .active_low = 1, diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig deleted file mode 100644 index 6a4af7f57584..000000000000 --- a/arch/arm/mach-s5p6440/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -# arch/arm/mach-s5p6440/Kconfig -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -if ARCH_S5P6440 - -config CPU_S5P6440 - bool - select S3C_PL330_DMA - help - Enable S5P6440 CPU support - -config S5P6440_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config MACH_SMDK6440 - bool "SMDK6440" - select CPU_S5P6440 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - select S5P6440_SETUP_I2C1 - help - Machine support for the Samsung SMDK6440 - -endif diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile deleted file mode 100644 index c3fe4d3662a9..000000000000 --- a/arch/arm/mach-s5p6440/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# arch/arm/mach-s5p6440/Makefile -# -# Copyright (c) 2009 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5P6440 system - -obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o dma.o -obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o -obj-$(CONFIG_S5P6440_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c deleted file mode 100644 index ca6e48dce777..000000000000 --- a/arch/arm/mach-s5p6440/clock.c +++ /dev/null @@ -1,846 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/clock.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/sysdev.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> - -#include <plat/cpu-freq.h> -#include <mach/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/clock-clksrc.h> -#include <plat/s5p-clock.h> -#include <plat/pll.h> -#include <plat/s5p6440.h> - -/* APLL Mux output clock */ -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static int s5p6440_epll_enable(struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; - - if (enable) - __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); - else - __raw_writel(epll_con, S5P_EPLL_CON); - - return 0; -} - -static unsigned long s5p6440_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static u32 epll_div[][5] = { - { 36000000, 0, 48, 1, 4 }, - { 48000000, 0, 32, 1, 3 }, - { 60000000, 0, 40, 1, 3 }, - { 72000000, 0, 48, 1, 3 }, - { 84000000, 0, 28, 1, 2 }, - { 96000000, 0, 32, 1, 2 }, - { 32768000, 45264, 43, 1, 4 }, - { 45158000, 6903, 30, 1, 3 }, - { 49152000, 50332, 32, 1, 3 }, - { 67738000, 10398, 45, 1, 3 }, - { 73728000, 9961, 49, 1, 3 } -}; - -static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - - if (clk->rate == rate) /* Return if nothing changed */ - return 0; - - epll_con = __raw_readl(S5P_EPLL_CON); - epll_con_k = __raw_readl(S5P_EPLL_CON_K); - - epll_con_k &= ~(PLL90XX_KDIV_MASK); - epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); - epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | - (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | - (epll_div[i][4] << PLL90XX_SDIV_SHIFT); - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); - return -EINVAL; - } - - __raw_writel(epll_con, S5P_EPLL_CON); - __raw_writel(epll_con_k, S5P_EPLL_CON_K); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops s5p6440_epll_ops = { - .get_rate = s5p6440_epll_get_rate, - .set_rate = s5p6440_epll_set_rate, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 }, -}; - -enum perf_level { - L0 = 532*1000, - L1 = 266*1000, - L2 = 133*1000, -}; - -static const u32 clock_table[][3] = { - /*{ARM_CLK, DIVarm, DIVhclk}*/ - {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)}, - {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)}, - {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)}, -}; - -static unsigned long s5p6440_armclk_get_rate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - u32 clkdiv; - - /* divisor mask starts at bit0, so no need to shift */ - clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; - - return rate / (clkdiv + 1); -} - -static unsigned long s5p6440_armclk_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 iter; - - for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (rate > clock_table[iter][0]) - return clock_table[iter-1][0]; - } - - return clock_table[ARRAY_SIZE(clock_table) - 1][0]; -} - -static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate) -{ - u32 round_tmp; - u32 iter; - u32 clk_div0_tmp; - u32 cur_rate = clk->ops->get_rate(clk); - unsigned long flags; - - round_tmp = clk->ops->round_rate(clk, rate); - if (round_tmp == cur_rate) - return 0; - - - for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { - if (round_tmp == clock_table[iter][0]) - break; - } - - if (iter >= ARRAY_SIZE(clock_table)) - iter = ARRAY_SIZE(clock_table) - 1; - - local_irq_save(flags); - if (cur_rate > round_tmp) { - /* Frequency Down */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - - } else { - /* Frequency Up */ - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & - ~(S5P_CLKDIV0_HCLK_MASK); - clk_div0_tmp |= clock_table[iter][2]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - - clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); - clk_div0_tmp |= clock_table[iter][1]; - __raw_writel(clk_div0_tmp, ARM_CLK_DIV); - } - local_irq_restore(flags); - - clk->rate = clock_table[iter][0]; - - return 0; -} - -static struct clk_ops s5p6440_clkarm_ops = { - .get_rate = s5p6440_armclk_get_rate, - .set_rate = s5p6440_armclk_set_rate, - .round_rate = s5p6440_armclk_round_rate, -}; - -static struct clksrc_clk clk_armclk = { - .clk = { - .name = "armclk", - .id = 1, - .parent = &clk_mout_apll.clk, - .ops = &s5p6440_clkarm_ops, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk clk_dout_mpll = { - .clk = { - .name = "dout_mpll", - .id = -1, - .parent = &clk_mout_mpll.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_hclk = { - .clk = { - .name = "clk_hclk", - .id = -1, - .parent = &clk_armclk.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk = { - .clk = { - .name = "clk_pclk", - .id = -1, - .parent = &clk_hclk.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 }, -}; - -static struct clk *clkset_hclklow_list[] = { - &clk_mout_apll.clk, - &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clkset_hclklow = { - .sources = clkset_hclklow_list, - .nr_sources = ARRAY_SIZE(clkset_hclklow_list), -}; - -static struct clksrc_clk clk_hclk_low = { - .clk = { - .name = "hclk_low", - .id = -1, - }, - .sources = &clkset_hclklow, - .reg_src = { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk clk_pclk_low = { - .clk = { - .name = "pclk_low", - .id = -1, - .parent = &clk_hclk_low.clk, - }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 }, -}; - -int s5p6440_clk48m_ctrl(struct clk *clk, int enable) -{ - unsigned long flags; - u32 val; - - /* can't rely on clock lock, this register has other usages */ - local_irq_save(flags); - - val = __raw_readl(S5P_OTHERS); - if (enable) - val |= S5P_OTHERS_USB_SIG_MASK; - else - val &= ~S5P_OTHERS_USB_SIG_MASK; - - __raw_writel(val, S5P_OTHERS); - - local_irq_restore(flags); - - return 0; -} - -static int s5p6440_pclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable); -} - -static int s5p6440_hclk0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable); -} - -static int s5p6440_hclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable); -} - -static int s5p6440_sclk_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable); -} - -static int s5p6440_sclk1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable); -} - -static int s5p6440_mem_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable); -} - -/* - * The following clocks will be disabled during clock initialization. It is - * recommended to keep the following clocks disabled until the driver requests - * for enabling the clock. - */ -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_mem_ctrl, - .ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON, - }, { - .name = "adc", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_TSADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_IIC0, - }, { - .name = "i2s_v40", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_IIS2, - }, { - .name = "spi", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_SPI0, - }, { - .name = "spi", - .id = 1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_SPI1, - }, { - .name = "sclk_spi_48", - .id = 0, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_SPI0_48, - }, { - .name = "sclk_spi_48", - .id = 1, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_SPI1_48, - }, { - .name = "mmc_48m", - .id = 0, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC0_48, - }, { - .name = "mmc_48m", - .id = 1, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC1_48, - }, { - .name = "mmc_48m", - .id = 2, - .parent = &clk_48m, - .enable = s5p6440_sclk_ctrl, - .ctrlbit = S5P_CLKCON_SCLK0_MMC2_48, - }, { - .name = "otg", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_USB - }, { - .name = "post", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_POST0 - }, { - .name = "lcd", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = S5P_CLKCON_HCLK1_DISPCON, - }, { - .name = "hsmmc", - .id = 0, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC0, - }, { - .name = "hsmmc", - .id = 1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC1, - }, { - .name = "hsmmc", - .id = 2, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = S5P_CLKCON_HCLK0_HSMMC2, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_WDT, - }, { - .name = "timers", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_PWM, - }, { - .name = "hclk_fimgvg", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "tsi", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "pclk_fimgvg", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 31), - }, { - .name = "dmc0", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 30), - }, { - .name = "etm", - .id = -1, - .parent = &clk_pclk.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 29), - }, { - .name = "dsim", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 28), - }, { - .name = "gps", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "pcm", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "irom", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "dma", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "2d", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 8), - }, -}; - -/* - * The following clocks will be enabled during clock initialization. - */ -static struct clk init_clocks[] = { - { - .name = "gpio", - .id = -1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_GPIO, - }, { - .name = "uart", - .id = 0, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_pclk_low.clk, - .enable = s5p6440_pclk_ctrl, - .ctrlbit = S5P_CLKCON_PCLK_UART3, - }, { - .name = "mem", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "intc", - .id = -1, - .parent = &clk_hclk.clk, - .enable = s5p6440_hclk0_ctrl, - .ctrlbit = (1 << 1), - }, -}; - -static struct clk clk_iis_cd_v40 = { - .name = "iis_cdclk_v40", - .id = -1, -}; - -static struct clk clk_pcm_cd = { - .name = "pcm_cdclk", - .id = -1, -}; - -static struct clk *clkset_group1_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, -}; - -static struct clksrc_sources clkset_group1 = { - .sources = clkset_group1_list, - .nr_sources = ARRAY_SIZE(clkset_group1_list), -}; - -static struct clk *clkset_uart_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, -}; - -static struct clksrc_sources clkset_uart = { - .sources = clkset_uart_list, - .nr_sources = ARRAY_SIZE(clkset_uart_list), -}; - -static struct clk *clkset_audio_list[] = { - &clk_mout_epll.clk, - &clk_dout_mpll.clk, - &clk_fin_epll, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -static struct clksrc_sources clkset_audio = { - .sources = clkset_audio_list, - .nr_sources = ARRAY_SIZE(clkset_audio_list), -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "mmc_bus", - .id = 0, - .ctrlbit = S5P_CLKCON_SCLK0_MMC0, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 1, - .ctrlbit = S5P_CLKCON_SCLK0_MMC1, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "mmc_bus", - .id = 2, - .ctrlbit = S5P_CLKCON_SCLK0_MMC2, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "uclk1", - .id = -1, - .ctrlbit = S5P_CLKCON_SCLK0_UART, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_uart, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "spi_epll", - .id = 0, - .ctrlbit = S5P_CLKCON_SCLK0_SPI0, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "spi_epll", - .id = 1, - .ctrlbit = S5P_CLKCON_SCLK0_SPI1, - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_post", - .id = -1, - .ctrlbit = (1 << 10), - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_dispcon", - .id = -1, - .ctrlbit = (1 << 1), - .enable = s5p6440_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimgvg", - .id = -1, - .ctrlbit = (1 << 2), - .enable = s5p6440_sclk1_ctrl, - }, - .sources = &clkset_group1, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 }, - .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_audio2", - .id = -1, - .ctrlbit = (1 << 11), - .enable = s5p6440_sclk_ctrl, - }, - .sources = &clkset_audio, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 }, - }, -}; - -/* Clock initialisation code */ -static struct clksrc_clk *sysclks[] = { - &clk_mout_apll, - &clk_mout_epll, - &clk_mout_mpll, - &clk_dout_mpll, - &clk_armclk, - &clk_hclk, - &clk_pclk, - &clk_hclk_low, - &clk_pclk_low, -}; - -void __init_or_cpufreq s5p6440_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long hclk_low; - unsigned long pclk; - unsigned long pclk_low; - unsigned long epll; - unsigned long apll; - unsigned long mpll; - unsigned int ptr; - - /* Set S5P6440 functions for clk_fout_epll */ - clk_fout_epll.enable = s5p6440_epll_enable; - clk_fout_epll.ops = &s5p6440_epll_ops; - - clk_48m.enable = s5p6440_clk48m_ctrl; - - xtal_clk = clk_get(NULL, "ext_xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON), - __raw_readl(S5P_EPLL_CON_K)); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502); - - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_apll.rate = apll; - - printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ - " E=%ld.%ldMHz\n", - print_mhz(apll), print_mhz(mpll), print_mhz(epll)); - - fclk = clk_get_rate(&clk_armclk.clk); - hclk = clk_get_rate(&clk_hclk.clk); - pclk = clk_get_rate(&clk_pclk.clk); - hclk_low = clk_get_rate(&clk_hclk_low.clk); - pclk_low = clk_get_rate(&clk_pclk_low.clk); - - printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ - " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", - print_mhz(hclk), print_mhz(hclk_low), - print_mhz(pclk), print_mhz(pclk_low)); - - clk_f.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); -} - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_iis_cd_v40, - &clk_pcm_cd, -}; - -void __init s5p6440_register_clocks(void) -{ - struct clk *clkp; - int ret; - int ptr; - - ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - if (ret > 0) - printk(KERN_ERR "Failed to register %u clocks\n", ret); - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - (clkp->enable)(clkp, 0); - } - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c deleted file mode 100644 index 526f33adb31d..000000000000 --- a/arch/arm/mach-s5p6440/cpu.c +++ /dev/null @@ -1,116 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/cpu.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/proc-fns.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/irq.h> - -#include <plat/regs-serial.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/s5p6440.h> -#include <plat/adc-core.h> - -static void s5p6440_idle(void) -{ - unsigned long val; - - if (!need_resched()) { - val = __raw_readl(S5P_PWR_CFG); - val &= ~(0x3<<5); - val |= (0x1<<5); - __raw_writel(val, S5P_PWR_CFG); - - cpu_do_idle(); - } - local_irq_enable(); -} - -/* s5p6440_map_io - * - * register the standard cpu IO areas -*/ - -void __init s5p6440_map_io(void) -{ - /* initialize any device information early */ - s3c_adc_setname("s3c64xx-adc"); -} - -void __init s5p6440_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6440_register_clocks(); - s5p6440_setup_clocks(); -} - -void __init s5p6440_init_irq(void) -{ - /* S5P6440 supports only 2 VIC */ - u32 vic[2]; - - /* - * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] - * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] - */ - vic[0] = 0xff800ae7; - vic[1] = 0xffbf23e5; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p6440_sysclass = { - .name = "s5p6440-core", -}; - -static struct sys_device s5p6440_sysdev = { - .cls = &s5p6440_sysclass, -}; - -static int __init s5p6440_core_init(void) -{ - return sysdev_class_register(&s5p6440_sysclass); -} - -core_initcall(s5p6440_core_init); - -int __init s5p6440_init(void) -{ - printk(KERN_INFO "S5P6440: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p6440_idle; - - return sysdev_register(&s5p6440_sysdev); -} diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c deleted file mode 100644 index 3ca0d2b8275d..000000000000 --- a/arch/arm/mach-s5p6440/dev-audio.c +++ /dev/null @@ -1,127 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/audio.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5p6440_cfg_i2s(struct platform_device *pdev) -{ - /* configure GPIO for i2s port */ - switch (pdev->id) { - case -1: - s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); - break; - - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_i2s_pdata = { - .cfg_gpio = s5p6440_cfg_i2s, -}; - -static struct resource s5p6440_iis0_resource[] = { - [0] = { - .start = S5P6440_PA_I2S, - .end = S5P6440_PA_I2S + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6440_device_iis = { - .name = "s3c64xx-iis-v4", - .id = -1, - .num_resources = ARRAY_SIZE(s5p6440_iis0_resource), - .resource = s5p6440_iis0_resource, - .dev = { - .platform_data = &s3c_i2s_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5p6440_pcm_cfg_gpio, -}; - -static struct resource s5p6440_pcm0_resource[] = { - [0] = { - .start = S5P6440_PA_PCM, - .end = S5P6440_PA_PCM + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6440_device_pcm = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), - .resource = s5p6440_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c deleted file mode 100644 index 510af44d180c..000000000000 --- a/arch/arm/mach-s5p6440/dev-spi.c +++ /dev/null @@ -1,176 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/spi-clocks.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *spi_src_clks[] = { - [S5P6440_SPI_SRCCLK_PCLK] = "pclk", - [S5P6440_SPI_SRCCLK_SCLK] = "spi_epll", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); - break; - - case 1: - s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5p6440_spi0_resource[] = { - [0] = { - .start = S5P6440_PA_SPI0, - .end = S5P6440_PA_SPI0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi0_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p6440_device_spi0 = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6440_spi0_resource), - .resource = s5p6440_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_spi0_pdata, - }, -}; - -static struct resource s5p6440_spi1_resource[] = { - [0] = { - .start = S5P6440_PA_SPI1, - .end = S5P6440_PA_SPI1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI1_TX, - .end = DMACH_SPI1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI1_RX, - .end = DMACH_SPI1_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6440_spi1_pdata = { - .cfg_gpio = s5p6440_spi_cfg_gpio, - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, -}; - -struct platform_device s5p6440_device_spi1 = { - .name = "s3c64xx-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6440_spi1_resource), - .resource = s5p6440_spi1_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_spi1_pdata, - }, -}; - -void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5p6440_spi0_pdata; - break; - case 1: - pd = &s5p6440_spi1_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S deleted file mode 100644 index 1347d7f99079..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h deleted file mode 100644 index 21783834f2a2..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/gpio.h +++ /dev/null @@ -1,80 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* GPIO bank sizes */ -#define S5P6440_GPIO_A_NR (6) -#define S5P6440_GPIO_B_NR (7) -#define S5P6440_GPIO_C_NR (8) -#define S5P6440_GPIO_F_NR (2) -#define S5P6440_GPIO_G_NR (7) -#define S5P6440_GPIO_H_NR (10) -#define S5P6440_GPIO_I_NR (16) -#define S5P6440_GPIO_J_NR (12) -#define S5P6440_GPIO_N_NR (16) -#define S5P6440_GPIO_P_NR (8) -#define S5P6440_GPIO_R_NR (15) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ -#define S5P6440_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5P6440_GPIO_A_START = 0, - S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A), - S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B), - S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C), - S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F), - S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G), - S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H), - S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I), - S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J), - S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N), - S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P), -}; - -/* S5P6440 GPIO number definitions. */ -#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) -#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) -#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) -#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) -#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) -#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) -#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) -#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) -#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) -#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) -#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) - -/* the end of the S5P6440 specific gpios */ -#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) -#define S3C_GPIO_END S5P6440_GPIO_END - -/* define the number of gpios we need to the one after the GPR() range */ -#define ARCH_NR_GPIOS (S5P6440_GPR(S5P6440_GPIO_R_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include <asm-generic/gpio.h> - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h deleted file mode 100644 index fa2d69cb1ad7..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5p6440/include/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S3C64XX based - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h deleted file mode 100644 index 6cc5cbc88ffb..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ /dev/null @@ -1,86 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/map.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P6440_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P6440_PA_CHIPID - -#define S5P6440_PA_SYSCON (0xE0100000) -#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0) -#define S5P_PA_SYSCON S5P6440_PA_SYSCON - -#define S5P6440_PA_GPIO (0xE0308000) -#define S5P_PA_GPIO S5P6440_PA_GPIO - -#define S5P6440_PA_VIC0 (0xE4000000) -#define S5P_PA_VIC0 S5P6440_PA_VIC0 - -#define S5P6440_PA_PDMA 0xE9000000 - -#define S5P6440_PA_VIC1 (0xE4100000) -#define S5P_PA_VIC1 S5P6440_PA_VIC1 - -#define S5P6440_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P6440_PA_TIMER - -#define S5P6440_PA_RTC (0xEA100000) - -#define S5P6440_PA_WDT (0xEA200000) -#define S5P_PA_WDT S5P6440_PA_WDT - -#define S5P6440_PA_UART (0xEC000000) - -#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0) -#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400) -#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800) -#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00) - -#define S5P_SZ_UART SZ_256 - -#define S5P6440_PA_IIC0 (0xEC104000) -#define S5P6440_PA_IIC1 (0xEC20F000) - -#define S5P6440_PA_SPI0 0xEC400000 -#define S5P6440_PA_SPI1 0xEC500000 - -#define S5P6440_PA_HSOTG (0xED100000) - -#define S5P6440_PA_HSMMC0 (0xED800000) -#define S5P6440_PA_HSMMC1 (0xED900000) -#define S5P6440_PA_HSMMC2 (0xEDA00000) - -#define S5P6440_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5P6440_PA_SDRAM - -/* I2S */ -#define S5P6440_PA_I2S 0xF2000000 - -/* PCM */ -#define S5P6440_PA_PCM 0xF2100000 - -#define S5P6440_PA_ADC (0xF3000000) - -/* compatibiltiy defines. */ -#define S3C_PA_UART S5P6440_PA_UART -#define S3C_PA_IIC S5P6440_PA_IIC0 -#define S3C_PA_RTC S5P6440_PA_RTC -#define S3C_PA_IIC1 S5P6440_PA_IIC1 -#define S3C_PA_WDT S5P6440_PA_WDT - -#define SAMSUNG_PA_ADC S5P6440_PA_ADC - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h deleted file mode 100644 index c783ecc9f193..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h +++ /dev/null @@ -1,130 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x04) -#define S5P_EPLL_LOCK S5P_CLKREG(0x08) -#define S5P_APLL_CON S5P_CLKREG(0x0C) -#define S5P_MPLL_CON S5P_CLKREG(0x10) -#define S5P_EPLL_CON S5P_CLKREG(0x14) -#define S5P_EPLL_CON_K S5P_CLKREG(0x18) -#define S5P_CLK_SRC0 S5P_CLKREG(0x1C) -#define S5P_CLK_DIV0 S5P_CLKREG(0x20) -#define S5P_CLK_DIV1 S5P_CLKREG(0x24) -#define S5P_CLK_DIV2 S5P_CLKREG(0x28) -#define S5P_CLK_OUT S5P_CLKREG(0x2C) -#define S5P_CLK_GATE_HCLK0 S5P_CLKREG(0x30) -#define S5P_CLK_GATE_PCLK S5P_CLKREG(0x34) -#define S5P_CLK_GATE_SCLK0 S5P_CLKREG(0x38) -#define S5P_CLK_GATE_MEM0 S5P_CLKREG(0x3C) -#define S5P_CLK_DIV3 S5P_CLKREG(0x40) -#define S5P_CLK_GATE_HCLK1 S5P_CLKREG(0x44) -#define S5P_CLK_GATE_SCLK1 S5P_CLKREG(0x48) -#define S5P_AHB_CON0 S5P_CLKREG(0x100) -#define S5P_CLK_SRC1 S5P_CLKREG(0x10C) -#define S5P_SWRESET S5P_CLKREG(0x114) -#define S5P_SYS_ID S5P_CLKREG(0x118) -#define S5P_SYS_OTHERS S5P_CLKREG(0x11C) -#define S5P_MEM_CFG_STAT S5P_CLKREG(0x12C) -#define S5P_PWR_CFG S5P_CLKREG(0x804) -#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0x808) -#define S5P_NORMAL_CFG S5P_CLKREG(0x810) -#define S5P_STOP_CFG S5P_CLKREG(0x814) -#define S5P_SLEEP_CFG S5P_CLKREG(0x818) -#define S5P_OSC_FREQ S5P_CLKREG(0x820) -#define S5P_OSC_STABLE S5P_CLKREG(0x824) -#define S5P_PWR_STABLE S5P_CLKREG(0x828) -#define S5P_MTC_STABLE S5P_CLKREG(0x830) -#define S5P_OTHERS S5P_CLKREG(0x900) -#define S5P_RST_STAT S5P_CLKREG(0x904) -#define S5P_WAKEUP_STAT S5P_CLKREG(0x908) -#define S5P_SLPEN S5P_CLKREG(0x930) -#define S5P_INFORM0 S5P_CLKREG(0xA00) -#define S5P_INFORM1 S5P_CLKREG(0xA04) -#define S5P_INFORM2 S5P_CLKREG(0xA08) -#define S5P_INFORM3 S5P_CLKREG(0xA0C) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_PCLK_MASK (0xf << 12) -#define S5P_CLKDIV0_PCLK_SHIFT (12) -#define S5P_CLKDIV0_HCLK_MASK (0xf << 8) -#define S5P_CLKDIV0_HCLK_SHIFT (8) -#define S5P_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S5P_CLKDIV0_ARM_MASK (0xf << 0) -#define S5P_CLKDIV0_ARM_SHIFT (0) - -/* CLKDIV3 */ -#define S5P_CLKDIV3_PCLK_LOW_MASK (0xf << 12) -#define S5P_CLKDIV3_PCLK_LOW_SHIFT (12) -#define S5P_CLKDIV3_HCLK_LOW_MASK (0xf << 8) -#define S5P_CLKDIV3_HCLK_LOW_SHIFT (8) - -/* HCLK0 GATE Registers */ -#define S5P_CLKCON_HCLK0_USB (1<<20) -#define S5P_CLKCON_HCLK0_HSMMC2 (1<<19) -#define S5P_CLKCON_HCLK0_HSMMC1 (1<<18) -#define S5P_CLKCON_HCLK0_HSMMC0 (1<<17) -#define S5P_CLKCON_HCLK0_POST0 (1<<5) - -/* HCLK1 GATE Registers */ -#define S5P_CLKCON_HCLK1_DISPCON (1<<1) - -/* PCLK GATE Registers */ -#define S5P_CLKCON_PCLK_IIS2 (1<<26) -#define S5P_CLKCON_PCLK_SPI1 (1<<22) -#define S5P_CLKCON_PCLK_SPI0 (1<<21) -#define S5P_CLKCON_PCLK_GPIO (1<<18) -#define S5P_CLKCON_PCLK_IIC0 (1<<17) -#define S5P_CLKCON_PCLK_TSADC (1<<12) -#define S5P_CLKCON_PCLK_PWM (1<<7) -#define S5P_CLKCON_PCLK_RTC (1<<6) -#define S5P_CLKCON_PCLK_WDT (1<<5) -#define S5P_CLKCON_PCLK_UART3 (1<<4) -#define S5P_CLKCON_PCLK_UART2 (1<<3) -#define S5P_CLKCON_PCLK_UART1 (1<<2) -#define S5P_CLKCON_PCLK_UART0 (1<<1) - -/* SCLK0 GATE Registers */ -#define S5P_CLKCON_SCLK0_MMC2_48 (1<<29) -#define S5P_CLKCON_SCLK0_MMC1_48 (1<<28) -#define S5P_CLKCON_SCLK0_MMC0_48 (1<<27) -#define S5P_CLKCON_SCLK0_MMC2 (1<<26) -#define S5P_CLKCON_SCLK0_MMC1 (1<<25) -#define S5P_CLKCON_SCLK0_MMC0 (1<<24) -#define S5P_CLKCON_SCLK0_SPI1_48 (1<<23) -#define S5P_CLKCON_SCLK0_SPI0_48 (1<<22) -#define S5P_CLKCON_SCLK0_SPI1 (1<<21) -#define S5P_CLKCON_SCLK0_SPI0 (1<<20) -#define S5P_CLKCON_SCLK0_UART (1<<5) - -/* SCLK1 GATE Registers */ - -/* MEM0 GATE Registers */ -#define S5P_CLKCON_MEM0_HCLK_NFCON (1<<2) - -/*OTHERS Resgister */ -#define S5P_OTHERS_USB_SIG_MASK (1<<16) -#define S5P_OTHERS_HCLK_LOW_SEL_MPLL (1<<6) - -/* Compatibility defines */ -#define ARM_CLK_DIV S5P_CLK_DIV0 -#define ARM_DIV_RATIO_SHIFT 0 -#define ARM_DIV_MASK (0xf << ARM_DIV_RATIO_SHIFT) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h deleted file mode 100644 index 5fbca50d1cfb..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5P6440_PLAT_SPI_CLKS_H -#define __S5P6440_PLAT_SPI_CLKS_H __FILE__ - -#define S5P6440_SPI_SRCCLK_PCLK 0 -#define S5P6440_SPI_SRCCLK_SCLK 1 - -#endif /* __S5P6440_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h deleted file mode 100644 index 7c1f600d65c0..000000000000 --- a/arch/arm/mach-s5p6440/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c deleted file mode 100644 index a1f3727e4021..000000000000 --- a/arch/arm/mach-s5p6440/init.c +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/mach-s5p6440/init.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6440 - Init support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5p6440.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = { - [0] = { - .name = "pclk_low", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, - [1] = { - .name = "uclk1", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p6440_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig index 0fda0a5df968..33569e4007c4 100644 --- a/arch/arm/mach-s5p6442/Kconfig +++ b/arch/arm/mach-s5p6442/Kconfig @@ -11,7 +11,6 @@ if ARCH_S5P6442 config CPU_S5P6442 bool - select PLAT_S5P select S3C_PL330_DMA help Enable S5P6442 CPU support diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c index a48fb553fd01..842af86bda6d 100644 --- a/arch/arm/mach-s5p6442/cpu.c +++ b/arch/arm/mach-s5p6442/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5p6442/cpu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,6 +19,7 @@ #include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -47,10 +48,30 @@ static struct map_desc s5p6442_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P6442_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P6442_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P6442_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, .pfn = __phys_to_pfn(S5P6442_PA_VIC2), .length = SZ_16K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, } }; @@ -62,10 +83,11 @@ static void s5p6442_idle(void) local_irq_enable(); } -/* s5p6442_map_io +/* + * s5p6442_map_io * * register the standard cpu IO areas -*/ + */ void __init s5p6442_map_io(void) { diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 281d256faafb..31fb2e68d527 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -23,16 +23,10 @@ #define S5P_PA_SYSCON S5P6442_PA_SYSCON #define S5P6442_PA_GPIO (0xE0200000) -#define S5P_PA_GPIO S5P6442_PA_GPIO #define S5P6442_PA_VIC0 (0xE4000000) -#define S5P_PA_VIC0 S5P6442_PA_VIC0 - #define S5P6442_PA_VIC1 (0xE4100000) -#define S5P_PA_VIC1 S5P6442_PA_VIC1 - #define S5P6442_PA_VIC2 (0xE4200000) -#define S5P_PA_VIC2 S5P6442_PA_VIC2 #define S5P6442_PA_MDMA 0xE8000000 #define S5P6442_PA_PDMA 0xE9000000 diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig new file mode 100644 index 000000000000..164d2783d381 --- /dev/null +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -0,0 +1,55 @@ +# arch/arm/mach-s5p64x0/Kconfig +# +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +if ARCH_S5P64X0 + +config CPU_S5P6440 + bool + select S3C_PL330_DMA + help + Enable S5P6440 CPU support + +config CPU_S5P6450 + bool + select S3C_PL330_DMA + help + Enable S5P6450 CPU support + +config S5P64X0_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +# machine support + +config MACH_SMDK6440 + bool "SMDK6440" + select CPU_S5P6440 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C64XX_DEV_SPI + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S5P64X0_SETUP_I2C1 + help + Machine support for the Samsung SMDK6440 + +config MACH_SMDK6450 + bool "SMDK6450" + select CPU_S5P6450 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C64XX_DEV_SPI + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S5P64X0_SETUP_I2C1 + help + Machine support for the Samsung SMDK6450 + +endif diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile new file mode 100644 index 000000000000..2655829e6bf8 --- /dev/null +++ b/arch/arm/mach-s5p64x0/Makefile @@ -0,0 +1,30 @@ +# arch/arm/mach-s5p64x0/Makefile +# +# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. +# http://www.samsung.com +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S5P64X0 system + +obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o +obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o +obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o gpio.o +obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o + +# machine support + +obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o +obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o + +# device support + +obj-y += dev-audio.o +obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o + +obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot index ff90aa13bd67..ff90aa13bd67 100644 --- a/arch/arm/mach-s5p6440/Makefile.boot +++ b/arch/arm/mach-s5p64x0/Makefile.boot diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c new file mode 100644 index 000000000000..f93dcd8b4d6a --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -0,0 +1,626 @@ +/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P6440 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/s5p64x0-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6440.h> + +static u32 epll_div[][5] = { + { 36000000, 0, 48, 1, 4 }, + { 48000000, 0, 32, 1, 3 }, + { 60000000, 0, 40, 1, 3 }, + { 72000000, 0, 48, 1, 3 }, + { 84000000, 0, 28, 1, 2 }, + { 96000000, 0, 32, 1, 2 }, + { 32768000, 45264, 43, 1, 4 }, + { 45158000, 6903, 30, 1, 3 }, + { 49152000, 50332, 32, 1, 3 }, + { 67738000, 10398, 45, 1, 3 }, + { 73728000, 9961, 49, 1, 3 } +}; + +static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P64X0_EPLL_CON); + epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P64X0_EPLL_CON); + __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6440_epll_ops = { + .get_rate = s5p64x0_epll_get_rate, + .set_rate = s5p6440_epll_set_rate, +}; + +static struct clksrc_clk clk_hclk = { + .clk = { + .name = "clk_hclk", + .id = -1, + .parent = &clk_armclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk = { + .clk = { + .name = "clk_pclk", + .id = -1, + .parent = &clk_hclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, +}; +static struct clksrc_clk clk_hclk_low = { + .clk = { + .name = "clk_hclk_low", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_low = { + .clk = { + .name = "clk_pclk_low", + .id = -1, + .parent = &clk_hclk_low.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, +}; + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_mem_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "post", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 5) + }, { + .name = "2d", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "otg", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 20) + }, { + .name = "irom", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "lcd", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "hclk_fimgvg", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "tsi", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "rtc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "timers", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "pcm", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "adc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "spi", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "gps", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "i2s_v40", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "dsim", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 28), + }, { + .name = "etm", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 29), + }, { + .name = "dmc0", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 30), + }, { + .name = "pclk_fimgvg", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 31), + }, { + .name = "sclk_spi_48", + .id = 0, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "sclk_spi_48", + .id = 1, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 23), + }, { + .name = "mmc_48m", + .id = 0, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "mmc_48m", + .id = 1, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 28), + }, { + .name = "mmc_48m", + .id = 2, + .parent = &clk_48m, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 29), + }, +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "intc", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "mem", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "dma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "uart", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .id = 2, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .id = 3, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "gpio", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 18), + }, +}; + +static struct clk clk_iis_cd_v40 = { + .name = "iis_cdclk_v40", + .id = -1, +}; + +static struct clk clk_pcm_cd = { + .name = "pcm_cdclk", + .id = -1, +}; + +static struct clk *clkset_group1_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, + &clk_fin_epll, +}; + +static struct clksrc_sources clkset_group1 = { + .sources = clkset_group1_list, + .nr_sources = ARRAY_SIZE(clkset_group1_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_audio_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll.clk, + &clk_fin_epll, + &clk_iis_cd_v40, + &clk_pcm_cd, +}; + +static struct clksrc_sources clkset_audio = { + .sources = clkset_audio_list, + .nr_sources = ARRAY_SIZE(clkset_audio_list), +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_post", + .id = -1, + .ctrlbit = (1 << 10), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_dispcon", + .id = -1, + .ctrlbit = (1 << 1), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimgvg", + .id = -1, + .ctrlbit = (1 << 2), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_group1, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_audio2", + .id = -1, + .ctrlbit = (1 << 11), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_audio, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, + &clk_dout_mpll, + &clk_armclk, + &clk_hclk, + &clk_pclk, + &clk_hclk_low, + &clk_pclk_low, +}; + +void __init_or_cpufreq s5p6440_setup_clocks(void) +{ + struct clk *xtal_clk; + + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned int ptr; + + /* Set S5P6440 functions for clk_fout_epll */ + + clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.ops = &s5p6440_epll_ops; + + clk_48m.enable = s5p64x0_clk48m_ctrl; + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), + __raw_readl(S5P64X0_EPLL_CON_K)); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + + printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll)); + + fclk = clk_get_rate(&clk_armclk.clk); + hclk = clk_get_rate(&clk_hclk.clk); + pclk = clk_get_rate(&clk_pclk.clk); + hclk_low = clk_get_rate(&clk_hclk_low.clk); + pclk_low = clk_get_rate(&clk_pclk_low.clk); + + printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_iis_cd_v40, + &clk_pcm_cd, +}; + +void __init s5p6440_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c new file mode 100644 index 000000000000..f9afb05b217c --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -0,0 +1,655 @@ +/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P6450 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/s5p64x0-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6450.h> + +static struct clksrc_clk clk_mout_dpll = { + .clk = { + .name = "mout_dpll", + .id = -1, + }, + .sources = &clk_src_dpll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 }, +}; + +static u32 epll_div[][5] = { + { 133000000, 27307, 55, 2, 2 }, + { 100000000, 43691, 41, 2, 2 }, + { 480000000, 0, 80, 2, 0 }, +}; + +static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + if (clk->rate == rate) /* Return if nothing changed */ + return 0; + + epll_con = __raw_readl(S5P64X0_EPLL_CON); + epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K); + + epll_con_k &= ~(PLL90XX_KDIV_MASK); + epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT); + epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) | + (epll_div[i][3] << PLL90XX_PDIV_SHIFT) | + (epll_div[i][4] << PLL90XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P64X0_EPLL_CON); + __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5p6450_epll_ops = { + .get_rate = s5p64x0_epll_get_rate, + .set_rate = s5p6450_epll_set_rate, +}; + +static struct clksrc_clk clk_dout_epll = { + .clk = { + .name = "dout_epll", + .id = -1, + .parent = &clk_mout_epll.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 }, +}; + +static struct clksrc_clk clk_mout_hclk_sel = { + .clk = { + .name = "mout_hclk_sel", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 }, +}; + +static struct clk *clkset_hclk_list[] = { + &clk_mout_hclk_sel.clk, + &clk_armclk.clk, +}; + +static struct clksrc_sources clkset_hclk = { + .sources = clkset_hclk_list, + .nr_sources = ARRAY_SIZE(clkset_hclk_list), +}; + +static struct clksrc_clk clk_hclk = { + .clk = { + .name = "clk_hclk", + .id = -1, + }, + .sources = &clkset_hclk, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk = { + .clk = { + .name = "clk_pclk", + .id = -1, + .parent = &clk_hclk.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, +}; +static struct clksrc_clk clk_dout_pwm_ratio0 = { + .clk = { + .name = "clk_dout_pwm_ratio0", + .id = -1, + .parent = &clk_mout_hclk_sel.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_to_wdt_pwm = { + .clk = { + .name = "clk_pclk_to_wdt_pwm", + .id = -1, + .parent = &clk_dout_pwm_ratio0.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 }, +}; + +static struct clksrc_clk clk_hclk_low = { + .clk = { + .name = "clk_hclk_low", + .id = -1, + }, + .sources = &clkset_hclk_low, + .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clk_pclk_low = { + .clk = { + .name = "clk_pclk_low", + .id = -1, + .parent = &clk_hclk_low.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, +}; + +/* + * The following clocks will be disabled during clock initialization. It is + * recommended to keep the following clocks disabled until the driver requests + * for enabling the clock. + */ +static struct clk init_clocks_disable[] = { + { + .name = "usbhost", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "usbotg", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s5p64x0_hclk1_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "adc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "spi", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "iis", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 26), + }, { + .name = "i2c", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 27), + }, { + .name = "dmc0", + .id = -1, + .parent = &clk_pclk.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 30), + } +}; + +/* + * The following clocks will be enabled during clock initialization. + */ +static struct clk init_clocks[] = { + { + .name = "intc", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "mem", + .id = -1, + .parent = &clk_hclk.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "dma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "uart", + .id = 0, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "uart", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "uart", + .id = 2, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "uart", + .id = 3, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "timers", + .id = -1, + .parent = &clk_pclk_to_wdt_pwm.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "gpio", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 18), + }, +}; + +static struct clk *clkset_uart_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, +}; + +static struct clksrc_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_mali_list[] = { + &clk_mout_epll.clk, + &clk_mout_apll.clk, + &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clkset_mali = { + .sources = clkset_mali_list, + .nr_sources = ARRAY_SIZE(clkset_mali_list), +}; + +static struct clk *clkset_group2_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, +}; + +static struct clksrc_sources clkset_group2 = { + .sources = clkset_group2_list, + .nr_sources = ARRAY_SIZE(clkset_group2_list), +}; + +static struct clk *clkset_dispcon_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, + &clk_mout_dpll.clk, +}; + +static struct clksrc_sources clkset_dispcon = { + .sources = clkset_dispcon_list, + .nr_sources = ARRAY_SIZE(clkset_dispcon_list), +}; + +static struct clk *clkset_hsmmc44_list[] = { + &clk_dout_epll.clk, + &clk_dout_mpll.clk, + &clk_ext_xtal_mux, + &s5p_clk_27m, + &clk_48m, +}; + +static struct clksrc_sources clkset_hsmmc44 = { + .sources = clkset_hsmmc44_list, + .nr_sources = ARRAY_SIZE(clkset_hsmmc44_list), +}; + +static struct clk *clkset_sclk_audio0_list[] = { + [0] = &clk_dout_epll.clk, + [1] = &clk_dout_mpll.clk, + [2] = &clk_ext_xtal_mux, + [3] = NULL, + [4] = NULL, +}; + +static struct clksrc_sources clkset_sclk_audio0 = { + .sources = clkset_sclk_audio0_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list), +}; + +static struct clksrc_clk clk_sclk_audio0 = { + .clk = { + .name = "audio-bus", + .id = -1, + .enable = s5p64x0_sclk_ctrl, + .ctrlbit = (1 << 8), + .parent = &clk_dout_epll.clk, + }, + .sources = &clkset_sclk_audio0, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 }, +}; + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "sclk_mmc", + .id = 0, + .ctrlbit = (1 << 24), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 1, + .ctrlbit = (1 << 25), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 2, + .ctrlbit = (1 << 26), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = (1 << 5), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_uart, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .ctrlbit = (1 << 20), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .ctrlbit = (1 << 21), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = -1, + .ctrlbit = (1 << 10), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "aclk_mali", + .id = -1, + .ctrlbit = (1 << 2), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_mali, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_2d", + .id = -1, + .ctrlbit = (1 << 12), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_mali, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_usi", + .id = -1, + .ctrlbit = (1 << 7), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_camif", + .id = -1, + .ctrlbit = (1 << 6), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_group2, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_dispcon", + .id = -1, + .ctrlbit = (1 << 1), + .enable = s5p64x0_sclk1_ctrl, + }, + .sources = &clkset_dispcon, + .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 }, + .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_hsmmc44", + .id = -1, + .ctrlbit = (1 << 30), + .enable = s5p64x0_sclk_ctrl, + }, + .sources = &clkset_hsmmc44, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 }, + .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 }, + }, +}; + +/* Clock initialization code */ +static struct clksrc_clk *sysclks[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_dout_epll, + &clk_mout_mpll, + &clk_dout_mpll, + &clk_armclk, + &clk_mout_hclk_sel, + &clk_dout_pwm_ratio0, + &clk_pclk_to_wdt_pwm, + &clk_hclk, + &clk_pclk, + &clk_hclk_low, + &clk_pclk_low, + &clk_sclk_audio0, +}; + +void __init_or_cpufreq s5p6450_setup_clocks(void) +{ + struct clk *xtal_clk; + + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk_low; + unsigned long pclk; + unsigned long pclk_low; + + unsigned long apll; + unsigned long mpll; + unsigned long epll; + unsigned long dpll; + unsigned int ptr; + + /* Set S5P6450 functions for clk_fout_epll */ + + clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.ops = &s5p6450_epll_ops; + + clk_48m.enable = s5p64x0_clk48m_ctrl; + + xtal_clk = clk_get(NULL, "ext_xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502); + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON), + __raw_readl(S5P64X0_EPLL_CON_K)); + dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON), + __raw_readl(S5P6450_DPLL_CON_K), pll_4650c); + + clk_fout_apll.rate = apll; + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_dpll.rate = dpll; + + printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \ + " E=%ld.%ldMHz, D=%ld.%ldMHz\n", + print_mhz(apll), print_mhz(mpll), print_mhz(epll), + print_mhz(dpll)); + + fclk = clk_get_rate(&clk_armclk.clk); + hclk = clk_get_rate(&clk_hclk.clk); + pclk = clk_get_rate(&clk_pclk.clk); + hclk_low = clk_get_rate(&clk_hclk_low.clk); + pclk_low = clk_get_rate(&clk_pclk_low.clk); + + printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \ + " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n", + print_mhz(hclk), print_mhz(hclk_low), + print_mhz(pclk), print_mhz(pclk_low)); + + clk_f.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_set_clksrc(&clksrcs[ptr], true); +} + +void __init s5p6450_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + (clkp->enable)(clkp, 0); + } + + s3c_pwmclk_init(); +} diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c new file mode 100644 index 000000000000..523ba8039ac2 --- /dev/null +++ b/arch/arm/mach-s5p64x0/clock.c @@ -0,0 +1,253 @@ +/* linux/arch/arm/mach-s5p64x0/clock.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> + +struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .sources = &clk_src_apll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 }, +}; + +struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .sources = &clk_src_mpll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 }, +}; + +struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .sources = &clk_src_epll, + .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 }, +}; + +enum perf_level { + L0 = 532*1000, + L1 = 266*1000, + L2 = 133*1000, +}; + +static const u32 clock_table[][3] = { + /*{ARM_CLK, DIVarm, DIVhclk}*/ + {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, + {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, + {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, +}; + +int s5p64x0_epll_enable(struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit; + + if (enable) + __raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON); + else + __raw_writel(epll_con, S5P64X0_EPLL_CON); + + return 0; +} + +unsigned long s5p64x0_epll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +unsigned long s5p64x0_armclk_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv; + + /* divisor mask starts at bit0, so no need to shift */ + clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK; + + return rate / (clkdiv + 1); +} + +unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate) +{ + u32 iter; + + for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (rate > clock_table[iter][0]) + return clock_table[iter-1][0]; + } + + return clock_table[ARRAY_SIZE(clock_table) - 1][0]; +} + +int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 round_tmp; + u32 iter; + u32 clk_div0_tmp; + u32 cur_rate = clk->ops->get_rate(clk); + unsigned long flags; + + round_tmp = clk->ops->round_rate(clk, rate); + if (round_tmp == cur_rate) + return 0; + + + for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) { + if (round_tmp == clock_table[iter][0]) + break; + } + + if (iter >= ARRAY_SIZE(clock_table)) + iter = ARRAY_SIZE(clock_table) - 1; + + local_irq_save(flags); + if (cur_rate > round_tmp) { + /* Frequency Down */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P64X0_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + + } else { + /* Frequency Up */ + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & + ~(S5P64X0_CLKDIV0_HCLK_MASK); + clk_div0_tmp |= clock_table[iter][2]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + + clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK); + clk_div0_tmp |= clock_table[iter][1]; + __raw_writel(clk_div0_tmp, ARM_CLK_DIV); + } + local_irq_restore(flags); + + clk->rate = clock_table[iter][0]; + + return 0; +} + +struct clk_ops s5p64x0_clkarm_ops = { + .get_rate = s5p64x0_armclk_get_rate, + .set_rate = s5p64x0_armclk_set_rate, + .round_rate = s5p64x0_armclk_round_rate, +}; + +struct clksrc_clk clk_armclk = { + .clk = { + .name = "armclk", + .id = 1, + .parent = &clk_mout_apll.clk, + .ops = &s5p64x0_clkarm_ops, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 }, +}; + +struct clksrc_clk clk_dout_mpll = { + .clk = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_mpll.clk, + }, + .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 }, +}; + +struct clk *clkset_hclk_low_list[] = { + &clk_mout_apll.clk, + &clk_mout_mpll.clk, +}; + +struct clksrc_sources clkset_hclk_low = { + .sources = clkset_hclk_low_list, + .nr_sources = ARRAY_SIZE(clkset_hclk_low_list), +}; + +int s5p64x0_pclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable); +} + +int s5p64x0_hclk0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable); +} + +int s5p64x0_hclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable); +} + +int s5p64x0_sclk_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable); +} + +int s5p64x0_sclk1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable); +} + +int s5p64x0_mem_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable); +} + +int s5p64x0_clk48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S5P64X0_OTHERS); + if (enable) + val |= S5P64X0_OTHERS_USB_SIG_MASK; + else + val &= ~S5P64X0_OTHERS_USB_SIG_MASK; + + __raw_writel(val, S5P64X0_OTHERS); + + local_irq_restore(flags); + + return 0; +} diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c new file mode 100644 index 000000000000..2f244db5cbe2 --- /dev/null +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -0,0 +1,209 @@ +/* linux/arch/arm/mach-s5p64x0/cpu.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/sched.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/proc-fns.h> +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> +#include <plat/adc-core.h> + +/* Initial IO mappings */ + +static struct map_desc s5p64x0_iodesc[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5P64X0_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5P64X0_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6440_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6440_PA_UART(0)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc s5p6450_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S5P6450_PA_UART(0)), + .length = SZ_512K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART + SZ_512K, + .pfn = __phys_to_pfn(S5P6450_PA_UART(5)), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void s5p64x0_idle(void) +{ + unsigned long val; + + if (!need_resched()) { + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); + + cpu_do_idle(); + } + local_irq_enable(); +} + +/* + * s5p64x0_map_io + * + * register the standard CPU IO areas + */ + +void __init s5p6440_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64x0-adc"); + + iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); + iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); +} + +void __init s5p6450_map_io(void) +{ + /* initialize any device information early */ + s3c_adc_setname("s3c64x0-adc"); + + iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); + iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc)); +} + +/* + * s5p64x0_init_clocks + * + * register and setup the CPU clocks + */ + +void __init s5p6440_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6440_register_clocks(); + s5p6440_setup_clocks(); +} + +void __init s5p6450_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + + s3c24xx_register_baseclocks(xtal); + s5p_register_clocks(xtal); + s5p6450_register_clocks(); + s5p6450_setup_clocks(); +} + +/* + * s5p64x0_init_irq + * + * register the CPU interrupts + */ + +void __init s5p6440_init_irq(void) +{ + /* S5P6440 supports 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)] + * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22] + */ + vic[0] = 0xff800ae7; + vic[1] = 0xffbf23e5; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +void __init s5p6450_init_irq(void) +{ + /* S5P6450 supports only 2 VIC */ + u32 vic[2]; + + /* + * VIC0 is missing IRQ_VIC0[(13-15), (21-22)] + * VIC1 is missing IRQ VIC1[12, 14, 23] + */ + vic[0] = 0xff9f1fff; + vic[1] = 0xff7fafff; + + s5p_init_irq(vic, ARRAY_SIZE(vic)); +} + +struct sysdev_class s5p64x0_sysclass = { + .name = "s5p64x0-core", +}; + +static struct sys_device s5p64x0_sysdev = { + .cls = &s5p64x0_sysclass, +}; + +static int __init s5p64x0_core_init(void) +{ + return sysdev_class_register(&s5p64x0_sysclass); +} +core_initcall(s5p64x0_core_init); + +int __init s5p64x0_init(void) +{ + printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); + + /* set idle function */ + pm_idle = s5p64x0_idle; + + return sysdev_register(&s5p64x0_sysdev); +} diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c new file mode 100644 index 000000000000..fa097bd68ca4 --- /dev/null +++ b/arch/arm/mach-s5p64x0/dev-audio.c @@ -0,0 +1,164 @@ +/* linux/arch/arm/mach-s5p64x0/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <plat/gpio-cfg.h> +#include <plat/audio.h> + +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/irqs.h> + +static int s5p6440_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case -1: + s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static int s5p6450_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case -1: + s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s5p6440_i2s_pdata = { + .cfg_gpio = s5p6440_cfg_i2s, +}; + +static struct s3c_audio_pdata s5p6450_i2s_pdata = { + .cfg_gpio = s5p6450_cfg_i2s, +}; + +static struct resource s5p64x0_iis0_resource[] = { + [0] = { + .start = S5P64X0_PA_I2S, + .end = S5P64X0_PA_I2S + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_iis = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), + .resource = s5p64x0_iis0_resource, + .dev = { + .platform_data = &s5p6440_i2s_pdata, + }, +}; + +struct platform_device s5p6450_device_iis0 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), + .resource = s5p64x0_iis0_resource, + .dev = { + .platform_data = &s5p6450_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); + break; + + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s5p6440_pcm_pdata = { + .cfg_gpio = s5p6440_pcm_cfg_gpio, +}; + +static struct resource s5p6440_pcm0_resource[] = { + [0] = { + .start = S5P64X0_PA_PCM, + .end = S5P64X0_PA_PCM + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_pcm = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), + .resource = s5p6440_pcm0_resource, + .dev = { + .platform_data = &s5p6440_pcm_pdata, + }, +}; diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c new file mode 100644 index 000000000000..5b69ec4c8af3 --- /dev/null +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -0,0 +1,232 @@ +/* linux/arch/arm/mach-s5p64x0/dev-spi.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <mach/dma.h> +#include <mach/map.h> +#include <mach/irqs.h> +#include <mach/regs-clock.h> +#include <mach/spi-clocks.h> + +#include <plat/s3c64xx-spi.h> +#include <plat/gpio-cfg.h> + +static char *s5p64x0_spi_src_clks[] = { + [S5P64X0_SPI_SRCCLK_PCLK] = "pclk", + [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi", +}; + +/* SPI Controller platform_devices */ + +/* Since we emulate multi-cs capability, we do not touch the CS. + * The emulated CS is toggled by board specific mechanism, as it can + * be either some immediate GPIO or some signal out of some other + * chip in between ... or some yet another way. + * We simply do not assume anything about CS. + */ +static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static int s5p6450_spi_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP); + break; + + case 1: + s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP); + break; + + default: + dev_err(&pdev->dev, "Invalid SPI Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct resource s5p64x0_spi0_resource[] = { + [0] = { + .start = S5P64X0_PA_SPI0, + .end = S5P64X0_PA_SPI0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI0_TX, + .end = DMACH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI0_RX, + .end = DMACH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5p6440_spi0_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static struct s3c64xx_spi_info s5p6450_spi0_pdata = { + .cfg_gpio = s5p6450_spi_cfg_gpio, + .fifo_lvl_mask = 0x1ff, + .rx_lvl_offset = 15, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5p64x0_device_spi0 = { + .name = "s3c64xx-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource), + .resource = s5p64x0_spi0_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource s5p64x0_spi1_resource[] = { + [0] = { + .start = S5P64X0_PA_SPI1, + .end = S5P64X0_PA_SPI1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPI1_TX, + .end = DMACH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_SPI1_RX, + .end = DMACH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c64xx_spi_info s5p6440_spi1_pdata = { + .cfg_gpio = s5p6440_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, +}; + +static struct s3c64xx_spi_info s5p6450_spi1_pdata = { + .cfg_gpio = s5p6450_spi_cfg_gpio, + .fifo_lvl_mask = 0x7f, + .rx_lvl_offset = 15, +}; + +struct platform_device s5p64x0_device_spi1 = { + .name = "s3c64xx-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource), + .resource = s5p64x0_spi1_resource, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) +{ + unsigned int id; + struct s3c64xx_spi_info *pd; + + id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; + + /* Reject invalid configuration */ + if (!num_cs || src_clk_nr < 0 + || src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) { + printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); + return; + } + + switch (cntrlr) { + case 0: + if (id == 0x50000) + pd = &s5p6450_spi0_pdata; + else + pd = &s5p6440_spi0_pdata; + + s5p64x0_device_spi0.dev.platform_data = pd; + break; + case 1: + if (id == 0x50000) + pd = &s5p6450_spi1_pdata; + else + pd = &s5p6440_spi1_pdata; + + s5p64x0_device_spi1.dev.platform_data = pd; + break; + default: + printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", + __func__, cntrlr); + return; + } + + pd->num_cs = num_cs; + pd->src_clk_nr = src_clk_nr; + pd->src_clk_name = s5p64x0_spi_src_clks[src_clk_nr]; +} diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p64x0/dma.c index 07606ad57519..29a8c2410049 100644 --- a/arch/arm/mach-s5p6440/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5p64x0/dma.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -15,26 +19,25 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ +*/ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <plat/devs.h> -#include <plat/irqs.h> - #include <mach/map.h> #include <mach/irqs.h> +#include <mach/regs-clock.h> +#include <plat/devs.h> #include <plat/s3c-pl330-pdata.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5p6440_pdma_resource[] = { +static struct resource s5p64x0_pdma_resource[] = { [0] = { - .start = S5P6440_PA_PDMA, - .end = S5P6440_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, + .start = S5P64X0_PA_PDMA, + .end = S5P64X0_PA_PDMA + SZ_4K, + .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_DMA0, @@ -80,26 +83,67 @@ static struct s3c_pl330_platdata s5p6440_pdma_pdata = { }, }; -static struct platform_device s5p6440_device_pdma = { +static struct s3c_pl330_platdata s5p6450_pdma_pdata = { + .peri = { + [0] = DMACH_UART0_RX, + [1] = DMACH_UART0_TX, + [2] = DMACH_UART1_RX, + [3] = DMACH_UART1_TX, + [4] = DMACH_UART2_RX, + [5] = DMACH_UART2_TX, + [6] = DMACH_UART3_RX, + [7] = DMACH_UART3_TX, + [8] = DMACH_UART4_RX, + [9] = DMACH_UART4_TX, + [10] = DMACH_PCM0_TX, + [11] = DMACH_PCM0_RX, + [12] = DMACH_I2S0_TX, + [13] = DMACH_I2S0_RX, + [14] = DMACH_SPI0_TX, + [15] = DMACH_SPI0_RX, + [16] = DMACH_PCM1_TX, + [17] = DMACH_PCM1_RX, + [18] = DMACH_PCM2_TX, + [19] = DMACH_PCM2_RX, + [20] = DMACH_SPI1_TX, + [21] = DMACH_SPI1_RX, + [22] = DMACH_USI_TX, + [23] = DMACH_USI_RX, + [24] = DMACH_MAX, + [25] = DMACH_I2S1_TX, + [26] = DMACH_I2S1_RX, + [27] = DMACH_I2S2_TX, + [28] = DMACH_I2S2_RX, + [29] = DMACH_PWM, + [30] = DMACH_UART5_RX, + [31] = DMACH_UART5_TX, + }, +}; + +static struct platform_device s5p64x0_device_pdma = { .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6440_pdma_resource), - .resource = s5p6440_pdma_resource, + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), + .resource = s5p64x0_pdma_resource, .dev = { .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6440_pdma_pdata, }, }; -static struct platform_device *s5p6440_dmacs[] __initdata = { - &s5p6440_device_pdma, -}; - -static int __init s5p6440_dma_init(void) +static int __init s5p64x0_dma_init(void) { - platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs)); + unsigned int id; + + id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; + + if (id == 0x50000) + s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; + else + s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; + + platform_device_register(&s5p64x0_device_pdma); return 0; } -arch_initcall(s5p6440_dma_init); +arch_initcall(s5p64x0_dma_init); diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p64x0/gpio.c index 8bf6e0ce51c9..131eefe0c9f2 100644 --- a/arch/arm/mach-s5p6440/gpio.c +++ b/arch/arm/mach-s5p64x0/gpio.c @@ -1,14 +1,14 @@ -/* arch/arm/mach-s5p6440/gpio.c +/* linux/arch/arm/mach-s5p64x0/gpio.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - GPIOlib support + * S5P64X0 - GPIOlib support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - */ +*/ #include <linux/kernel.h> #include <linux/irq.h> @@ -22,26 +22,29 @@ #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -/* GPIO bank summary: -* -* Bank GPIOs Style SlpCon ExtInt Group -* A 6 4Bit Yes 1 -* B 7 4Bit Yes 1 -* C 8 4Bit Yes 2 -* F 2 2Bit Yes 4 [1] -* G 7 4Bit Yes 5 -* H 10 4Bit[2] Yes 6 -* I 16 2Bit Yes None -* J 12 2Bit Yes None -* N 16 2Bit No IRQ_EINT -* P 8 2Bit Yes 8 -* R 15 4Bit[2] Yes 8 -* -* [1] BANKF pins 14,15 do not form part of the external interrupt sources -* [2] BANK has two control registers, GPxCON0 and GPxCON1 -*/ +/* To be implemented S5P6450 GPIO */ + +/* + * S5P6440 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * F 2 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 8 2Bit Yes 8 + * R 15 4Bit[2] Yes 8 + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ -static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, +static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, unsigned int offset) { struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); @@ -77,7 +80,7 @@ static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, return 0; } -static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, +static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, unsigned int offset, int value) { struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); @@ -124,7 +127,7 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, return 0; } -int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, +int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg) { void __iomem *reg = chip->base; @@ -167,14 +170,14 @@ int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, return 0; } -static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { +static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = { { .cfg_eint = 0, }, { .cfg_eint = 7, }, { .cfg_eint = 3, - .set_config = s5p6440_gpio_setcfg_4bit_rbank, + .set_config = s5p64x0_gpio_setcfg_4bit_rbank, }, { .cfg_eint = 0, .set_config = s3c_gpio_setcfg_s3c24xx, @@ -193,7 +196,7 @@ static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { { .base = S5P6440_GPA_BASE, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPA(0), .ngpio = S5P6440_GPIO_A_NR, @@ -201,7 +204,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { }, }, { .base = S5P6440_GPB_BASE, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPB(0), .ngpio = S5P6440_GPIO_B_NR, @@ -209,7 +212,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { }, }, { .base = S5P6440_GPC_BASE, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPC(0), .ngpio = S5P6440_GPIO_C_NR, @@ -217,7 +220,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { }, }, { .base = S5P6440_GPG_BASE, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPG(0), .ngpio = S5P6440_GPIO_G_NR, @@ -229,7 +232,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { { .base = S5P6440_GPH_BASE + 0x4, - .config = &s5p6440_gpio_cfgs[1], + .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPH(0), .ngpio = S5P6440_GPIO_H_NR, @@ -238,10 +241,10 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { }, }; -static struct s3c_gpio_chip gpio_rbank_4bit2[] = { +static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = { { .base = S5P6440_GPR_BASE + 0x4, - .config = &s5p6440_gpio_cfgs[2], + .config = &s5p64x0_gpio_cfgs[2], .chip = { .base = S5P6440_GPR(0), .ngpio = S5P6440_GPIO_R_NR, @@ -253,7 +256,7 @@ static struct s3c_gpio_chip gpio_rbank_4bit2[] = { static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { { .base = S5P6440_GPF_BASE, - .config = &s5p6440_gpio_cfgs[5], + .config = &s5p64x0_gpio_cfgs[5], .chip = { .base = S5P6440_GPF(0), .ngpio = S5P6440_GPIO_F_NR, @@ -261,7 +264,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }, { .base = S5P6440_GPI_BASE, - .config = &s5p6440_gpio_cfgs[3], + .config = &s5p64x0_gpio_cfgs[3], .chip = { .base = S5P6440_GPI(0), .ngpio = S5P6440_GPIO_I_NR, @@ -269,7 +272,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }, { .base = S5P6440_GPJ_BASE, - .config = &s5p6440_gpio_cfgs[3], + .config = &s5p64x0_gpio_cfgs[3], .chip = { .base = S5P6440_GPJ(0), .ngpio = S5P6440_GPIO_J_NR, @@ -277,7 +280,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }, { .base = S5P6440_GPN_BASE, - .config = &s5p6440_gpio_cfgs[4], + .config = &s5p64x0_gpio_cfgs[4], .chip = { .base = S5P6440_GPN(0), .ngpio = S5P6440_GPIO_N_NR, @@ -285,7 +288,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }, { .base = S5P6440_GPP_BASE, - .config = &s5p6440_gpio_cfgs[5], + .config = &s5p64x0_gpio_cfgs[5], .chip = { .base = S5P6440_GPP(0), .ngpio = S5P6440_GPIO_P_NR, @@ -294,7 +297,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }; -void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) +void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) { for (; nr_chips > 0; nr_chips--, chipcfg++) { if (!chipcfg->set_config) @@ -308,13 +311,13 @@ void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) } } -static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, +static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, int nr_chips) { for (; nr_chips > 0; nr_chips--, chip++) { - chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input; + chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input; chip->chip.direction_output = - s5p6440_gpiolib_rbank_4bit2_output; + s5p64x0_gpiolib_rbank_4bit2_output; s3c_gpiolib_add(chip); } } @@ -324,8 +327,8 @@ static int __init s5p6440_gpiolib_init(void) struct s3c_gpio_chip *chips = s5p6440_gpio_2bit; int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit); - s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs, - ARRAY_SIZE(s5p6440_gpio_cfgs)); + s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, + ARRAY_SIZE(s5p64x0_gpio_cfgs)); for (; nr_chips > 0; nr_chips--, chips++) s3c_gpiolib_add(chips); @@ -336,8 +339,8 @@ static int __init s5p6440_gpiolib_init(void) samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, ARRAY_SIZE(s5p6440_gpio_4bit2)); - s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2, - ARRAY_SIZE(gpio_rbank_4bit2)); + s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2, + ARRAY_SIZE(s5p6440_gpio_rbank_4bit2)); return 0; } diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S new file mode 100644 index 000000000000..f122baabc279 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -0,0 +1,39 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#include <plat/regs-serial.h> + + .macro addruart, rx, tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + bne 1002f + + mov \rx, #0xE0000000 + orr \rx, \rx, #0x00100000 + ldr \rx, [\rx, #0x118 ] + and \rx, \rx, #0xff000 + teq \rx, #0x50000 @@ S5P6450 + ldreq \rx, =0xEC800000 + movne \rx, #0xEC000000 @@ S5P6440 + b 1003f + 1002: + ldrne \rx, = S3C_VA_UART + 1003: +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6440/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h index 81209eb1409b..81209eb1409b 100644 --- a/arch/arm/mach-s5p6440/include/mach/dma.h +++ b/arch/arm/mach-s5p64x0/include/mach/dma.h diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S index e65f1b967262..10b62b4f8211 100644 --- a/arch/arm/mach-s5p6440/include/mach/entry-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S +/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * Low-level IRQ helper macros for the Samsung S5P6440 + * Low-level IRQ helper macros for the Samsung S5P64X0 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h new file mode 100644 index 000000000000..5486c8f01f1d --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h @@ -0,0 +1,139 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ + +#define S5P6440_GPIO_A_NR (6) +#define S5P6440_GPIO_B_NR (7) +#define S5P6440_GPIO_C_NR (8) +#define S5P6440_GPIO_F_NR (2) +#define S5P6440_GPIO_G_NR (7) +#define S5P6440_GPIO_H_NR (10) +#define S5P6440_GPIO_I_NR (16) +#define S5P6440_GPIO_J_NR (12) +#define S5P6440_GPIO_N_NR (16) +#define S5P6440_GPIO_P_NR (8) +#define S5P6440_GPIO_R_NR (15) + +#define S5P6450_GPIO_A_NR (6) +#define S5P6450_GPIO_B_NR (7) +#define S5P6450_GPIO_C_NR (8) +#define S5P6450_GPIO_D_NR (8) +#define S5P6450_GPIO_F_NR (2) +#define S5P6450_GPIO_G_NR (14) +#define S5P6450_GPIO_H_NR (10) +#define S5P6450_GPIO_I_NR (16) +#define S5P6450_GPIO_J_NR (12) +#define S5P6450_GPIO_K_NR (5) +#define S5P6450_GPIO_N_NR (16) +#define S5P6450_GPIO_P_NR (11) +#define S5P6450_GPIO_Q_NR (14) +#define S5P6450_GPIO_R_NR (15) +#define S5P6450_GPIO_S_NR (8) + +/* GPIO bank numbers */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ + +#define S5P64X0_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p6440_gpio_number { + S5P6440_GPIO_A_START = 0, + S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A), + S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B), + S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C), + S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F), + S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G), + S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H), + S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I), + S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J), + S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N), + S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P), +}; + +enum s5p6450_gpio_number { + S5P6450_GPIO_A_START = 0, + S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A), + S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B), + S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C), + S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D), + S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F), + S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G), + S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H), + S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I), + S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J), + S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K), + S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N), + S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P), + S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q), + S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R), +}; + +/* GPIO number definitions */ + +#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr)) +#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr)) +#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr)) +#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr)) +#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr)) +#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr)) +#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr)) +#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr)) +#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr)) +#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr)) +#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr)) + +#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr)) +#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr)) +#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr)) +#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr)) +#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr)) +#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr)) +#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr)) +#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr)) +#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr)) +#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr)) +#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr)) +#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr)) +#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr)) +#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr)) +#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr)) + +/* the end of the S5P64X0 specific gpios */ + +#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1) +#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1) + +#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \ + S5P6440_GPIO_END : S5P6450_GPIO_END) + +#define S3C_GPIO_END S5P64X0_GPIO_END + +/* define the number of gpios we need to the one after the last GPIO range */ + +#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h index be8b26e875db..d3e87996dd9a 100644 --- a/arch/arm/mach-s5p6440/include/mach/hardware.h +++ b/arch/arm/mach-s5p64x0/include/mach/hardware.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h +/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Hardware support + * S5P64X0 - Hardware support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/include/mach/i2c.h new file mode 100644 index 000000000000..887d25209e8e --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/i2c.h @@ -0,0 +1,17 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 I2C configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev); +extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev); + +extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev); +extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev); diff --git a/arch/arm/mach-s5p64x0/include/mach/io.h b/arch/arm/mach-s5p64x0/include/mach/io.h new file mode 100644 index 000000000000..a3e095c02fb5 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/io.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/io.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for S5P64X0 based + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 16a761270de1..513abffc7604 100644 --- a/arch/arm/mach-s5p6440/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -1,17 +1,17 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h +/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - IRQ definitions + * S5P64X0 - IRQ definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_S5P_IRQS_H -#define __ASM_ARCH_S5P_IRQS_H __FILE__ +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ #include <plat/irqs.h> @@ -20,10 +20,12 @@ #define IRQ_EINT0_3 S5P_IRQ_VIC0(0) #define IRQ_EINT4_11 S5P_IRQ_VIC0(1) #define IRQ_RTC_TIC S5P_IRQ_VIC0(2) +#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */ +#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */ #define IRQ_IIC1 S5P_IRQ_VIC0(5) #define IRQ_I2SV40 S5P_IRQ_VIC0(6) -#define IRQ_GPS S5P_IRQ_VIC0(7) -#define IRQ_POST0 S5P_IRQ_VIC0(9) +#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */ + #define IRQ_2D S5P_IRQ_VIC0(11) #define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23) #define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24) @@ -39,22 +41,26 @@ #define IRQ_EINT12_15 S5P_IRQ_VIC1(0) #define IRQ_PCM0 S5P_IRQ_VIC1(2) +#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */ +#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */ #define IRQ_UART0 S5P_IRQ_VIC1(5) #define IRQ_UART1 S5P_IRQ_VIC1(6) #define IRQ_UART2 S5P_IRQ_VIC1(7) #define IRQ_UART3 S5P_IRQ_VIC1(8) #define IRQ_DMA0 S5P_IRQ_VIC1(9) +#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */ +#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */ #define IRQ_NFC S5P_IRQ_VIC1(13) +#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */ #define IRQ_SPI0 S5P_IRQ_VIC1(16) #define IRQ_SPI1 S5P_IRQ_VIC1(17) +#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */ #define IRQ_IIC S5P_IRQ_VIC1(18) #define IRQ_DISPCON3 S5P_IRQ_VIC1(19) -#define IRQ_FIMGVG S5P_IRQ_VIC1(20) #define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21) -#define IRQ_PMU S5P_IRQ_VIC1(23) +#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */ #define IRQ_HSMMC0 S5P_IRQ_VIC1(24) #define IRQ_HSMMC1 S5P_IRQ_VIC1(25) -#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ #define IRQ_OTG S5P_IRQ_VIC1(26) #define IRQ_DSI S5P_IRQ_VIC1(27) #define IRQ_RTC_ALARM S5P_IRQ_VIC1(28) @@ -63,6 +69,24 @@ #define IRQ_TC IRQ_PENDN #define IRQ_ADC S5P_IRQ_VIC1(31) +/* UART interrupts, S5P6450 has 5 UARTs */ +#define IRQ_S5P_UART_BASE4 (96) +#define IRQ_S5P_UART_BASE5 (100) + +#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR) + +#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD) +#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD) +#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR) + +/* S3C compatibilty defines */ +#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 +#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 + +/* S5P6450 EINT feature will be added */ + /* * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place @@ -115,4 +139,4 @@ #define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1) -#endif /* __ASM_ARCH_S5P_IRQS_H */ +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h new file mode 100644 index 000000000000..31e534156e06 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -0,0 +1,83 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/map.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> +#include <plat/map-s5p.h> + +#define S5P64X0_PA_SDRAM (0x20000000) + +#define S5P64X0_PA_CHIPID (0xE0000000) +#define S5P_PA_CHIPID S5P64X0_PA_CHIPID + +#define S5P64X0_PA_SYSCON (0xE0100000) +#define S5P_PA_SYSCON S5P64X0_PA_SYSCON + +#define S5P64X0_PA_GPIO (0xE0308000) + +#define S5P64X0_PA_VIC0 (0xE4000000) +#define S5P64X0_PA_VIC1 (0xE4100000) + +#define S5P64X0_PA_PDMA (0xE9000000) + +#define S5P64X0_PA_TIMER (0xEA000000) +#define S5P_PA_TIMER S5P64X0_PA_TIMER + +#define S5P64X0_PA_RTC (0xEA100000) + +#define S5P64X0_PA_WDT (0xEA200000) + +#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) +#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) + +#define S5P_PA_UART0 S5P6450_PA_UART(0) +#define S5P_PA_UART1 S5P6450_PA_UART(1) +#define S5P_PA_UART2 S5P6450_PA_UART(2) +#define S5P_PA_UART3 S5P6450_PA_UART(3) +#define S5P_PA_UART4 S5P6450_PA_UART(4) +#define S5P_PA_UART5 S5P6450_PA_UART(5) + +#define S5P_SZ_UART SZ_256 + +#define S5P6440_PA_IIC0 (0xEC104000) +#define S5P6440_PA_IIC1 (0xEC20F000) +#define S5P6450_PA_IIC0 (0xEC100000) +#define S5P6450_PA_IIC1 (0xEC200000) + +#define S5P64X0_PA_SPI0 (0xEC400000) +#define S5P64X0_PA_SPI1 (0xEC500000) + +#define S5P64X0_PA_HSOTG (0xED100000) + +#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) + +#define S5P64X0_PA_I2S (0xF2000000) + +#define S5P64X0_PA_PCM (0xF2100000) + +#define S5P64X0_PA_ADC (0xF3000000) + +/* compatibiltiy defines. */ + +#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2) +#define S3C_PA_IIC S5P6440_PA_IIC0 +#define S3C_PA_IIC1 S5P6440_PA_IIC1 +#define S3C_PA_RTC S5P64X0_PA_RTC +#define S3C_PA_WDT S5P64X0_PA_WDT + +#define SAMSUNG_PA_ADC S5P64X0_PA_ADC + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h index d62910c71b56..1b036b0a24ce 100644 --- a/arch/arm/mach-s5p6440/include/mach/memory.h +++ b/arch/arm/mach-s5p64x0/include/mach/memory.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/memory.h +/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Memory definitions + * S5P64X0 - Memory definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,9 +11,9 @@ */ #ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H __FILE__ -#define PHYS_OFFSET UL(0x20000000) +#define PHYS_OFFSET UL(0x20000000) #define CONSISTENT_DMA_SIZE SZ_8M #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h index 6a2a02fdf12a..19fff8b701c0 100644 --- a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h +++ b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h @@ -1,16 +1,14 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h +/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5P6440 - pwm clock and timer support + * S5P64X0 - pwm clock and timer support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h new file mode 100644 index 000000000000..58e1bc813804 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h @@ -0,0 +1,63 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_CLOCK_H +#define __ASM_ARCH_REGS_CLOCK_H __FILE__ + +#include <mach/map.h> + +#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S5P64X0_APLL_CON S5P_CLKREG(0x0C) +#define S5P64X0_MPLL_CON S5P_CLKREG(0x10) +#define S5P64X0_EPLL_CON S5P_CLKREG(0x14) +#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18) + +#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C) + +#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20) +#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24) +#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28) + +#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30) +#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34) +#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38) +#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C) + +#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40) + +#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44) +#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48) + +#define S5P6450_DPLL_CON S5P_CLKREG(0x50) +#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54) + +#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C) + +#define S5P64X0_SYS_ID S5P_CLKREG(0x118) +#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C) + +#define S5P64X0_PWR_CFG S5P_CLKREG(0x804) +#define S5P64X0_OTHERS S5P_CLKREG(0x900) + +#define S5P64X0_CLKDIV0_HCLK_SHIFT (8) +#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT) + +#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16) + +/* Compatibility defines */ + +#define ARM_CLK_DIV S5P64X0_CLK_DIV0 +#define ARM_DIV_RATIO_SHIFT 0 +#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT) + +#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h index 82ff753913da..85f448e20a8b 100644 --- a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h @@ -1,21 +1,24 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - GPIO register definitions + * S5P64X0 - GPIO register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - */ +*/ #ifndef __ASM_ARCH_REGS_GPIO_H #define __ASM_ARCH_REGS_GPIO_H __FILE__ #include <mach/map.h> +/* Will be implemented S5P6442 GPIOlib */ + /* Base addresses for each of the banks */ + #define S5P6440_GPA_BASE (S5P_VA_GPIO + 0x0000) #define S5P6440_GPB_BASE (S5P_VA_GPIO + 0x0020) #define S5P6440_GPC_BASE (S5P_VA_GPIO + 0x0040) @@ -27,6 +30,7 @@ #define S5P6440_GPN_BASE (S5P_VA_GPIO + 0x0830) #define S5P6440_GPP_BASE (S5P_VA_GPIO + 0x0160) #define S5P6440_GPR_BASE (S5P_VA_GPIO + 0x0290) + #define S5P6440_EINT0CON0 (S5P_VA_GPIO + 0x900) #define S5P6440_EINT0FLTCON0 (S5P_VA_GPIO + 0x910) #define S5P6440_EINT0FLTCON1 (S5P_VA_GPIO + 0x914) @@ -34,19 +38,23 @@ #define S5P6440_EINT0PEND (S5P_VA_GPIO + 0x924) /* for LCD */ + #define S5P6440_SPCON_LCD_SEL_RGB (1 << 0) #define S5P6440_SPCON_LCD_SEL_MASK (3 << 0) -/* These set of macros are not really useful for the - * GPF/GPI/GPJ/GPN/GPP, - * useful for others set of GPIO's (4 bit) +/* + * These set of macros are not really useful for the + * GPF/GPI/GPJ/GPN/GPP, useful for others set of GPIO's (4 bit) */ + #define S5P6440_GPIO_CONMASK(__gpio) (0xf << ((__gpio) * 4)) #define S5P6440_GPIO_INPUT(__gpio) (0x0 << ((__gpio) * 4)) #define S5P6440_GPIO_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) -/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) - * */ +/* + * Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) + */ + #define S5P6440_GPIO2_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) #define S5P6440_GPIO2_INPUT(__gpio) (0x0 << ((__gpio) * 2)) #define S5P6440_GPIO2_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h index a961f4beeb0c..4aaebdace55f 100644 --- a/arch/arm/mach-s5p6440/include/mach/regs-irq.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h +/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - IRQ register definitions + * S5P64X0 - IRQ register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h new file mode 100644 index 000000000000..ff85b4b6e8d9 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h @@ -0,0 +1,46 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for s5p64x0 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clksrc_clk clk_mout_apll; +extern struct clksrc_clk clk_mout_mpll; +extern struct clksrc_clk clk_mout_epll; + +extern int s5p64x0_epll_enable(struct clk *clk, int enable); +extern unsigned long s5p64x0_epll_get_rate(struct clk *clk); + +extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk); +extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate); +extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate); + +extern struct clk_ops s5p64x0_clkarm_ops; + +extern struct clksrc_clk clk_armclk; +extern struct clksrc_clk clk_dout_mpll; + +extern struct clk *clkset_hclk_low_list[]; +extern struct clksrc_sources clkset_hclk_low; + +extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable); +extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable); +extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable); +extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable); +extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable); +extern int s5p64x0_mem_ctrl(struct clk *clk, int enable); + +extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h new file mode 100644 index 000000000000..170a20a9643a --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_SPI_CLKS_H +#define __ASM_ARCH_SPI_CLKS_H __FILE__ + +#define S5P64X0_SPI_SRCCLK_PCLK 0 +#define S5P64X0_SPI_SRCCLK_SCLK 1 + +#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h index a359ee3fa510..60f57532c970 100644 --- a/arch/arm/mach-s5p6440/include/mach/system.h +++ b/arch/arm/mach-s5p64x0/include/mach/system.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/system.h +/* linux/arch/arm/mach-s5p64x0/include/mach/system.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - system support header + * S5P64X0 - system support header * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h index 2f25c7f07970..00aa7f1d8e51 100644 --- a/arch/arm/mach-s5p6440/include/mach/tick.h +++ b/arch/arm/mach-s5p64x0/include/mach/tick.h @@ -1,9 +1,14 @@ -/* linux/arch/arm/mach-s5p6440/include/mach/tick.h +/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5P6440 - Timer tick support definitions + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S5P64X0 - Timer tick support definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h index fb2e8cd40829..4b91faa195a8 100644 --- a/arch/arm/mach-s5p6440/include/mach/timex.h +++ b/arch/arm/mach-s5p64x0/include/mach/timex.h @@ -1,9 +1,12 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h +/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2003-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C6400 - time parameters + * S5P64X0 - time parameters * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h new file mode 100644 index 000000000000..c65b229aab23 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h @@ -0,0 +1,212 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> + +/* + * cannot use commonly <plat/uncompress.h> + * because uart base of S5P6440 and S5P6450 is different + */ + +typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ + +/* uart setup */ + +static unsigned int fifo_mask; +static unsigned int fifo_max; + +/* forward declerations */ + +static void arch_detect_cpu(void); + +/* defines for UART registers */ + +#include <plat/regs-serial.h> +#include <plat/regs-watchdog.h> + +/* working in physical space... */ +#undef S3C2410_WDOGREG +#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +/* how many bytes we allow into the FIFO at a time in FIFO mode */ +#define FIFO_MAX (14) + +static unsigned long uart_base; + +static __inline__ void get_uart_base(void) +{ + unsigned int chipid; + + chipid = *(const volatile unsigned int __force *) 0xE0100118; + + uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT; + + if ((chipid & 0xff000) == 0x50000) + uart_base += 0xEC800000; + else + uart_base += 0xEC000000; +} + +static __inline__ void uart_wr(unsigned int reg, unsigned int val) +{ + volatile unsigned int *ptr; + + get_uart_base(); + ptr = (volatile unsigned int *)(reg + uart_base); + *ptr = val; +} + +static __inline__ unsigned int uart_rd(unsigned int reg) +{ + volatile unsigned int *ptr; + + get_uart_base(); + ptr = (volatile unsigned int *)(reg + uart_base); + return *ptr; +} + +/* + * we can deal with the case the UARTs are being run + * in FIFO mode, so that we don't hold up our execution + * waiting for tx to happen... + */ + +static void putc(int ch) +{ + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { + int level; + + while (1) { + level = uart_rd(S3C2410_UFSTAT); + level &= fifo_mask; + + if (level < fifo_max) + break; + } + + } else { + /* not using fifos */ + + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); + } + + /* write byte to transmission register */ + uart_wr(S3C2410_UTXH, ch); +} + +static inline void flush(void) +{ +} + +#define __raw_writel(d, ad) \ + do { \ + *((volatile unsigned int __force *)(ad)) = (d); \ + } while (0) + +/* + * CONFIG_S3C_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process + */ + +#ifdef CONFIG_S3C_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +#ifdef CONFIG_S3C_BOOT_ERROR_RESET + +static void arch_decomp_error(const char *x) +{ + putstr("\n\n"); + putstr(x); + putstr("\n\n -- System resetting\n"); + + __raw_writel(0x4000, S3C2410_WTDAT); + __raw_writel(0x4000, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + + while(1); +} + +#define arch_error arch_decomp_error +#endif + +#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO +static inline void arch_enable_uart_fifo(void) +{ + u32 fifocon = uart_rd(S3C2410_UFCON); + + if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { + fifocon |= S3C2410_UFCON_RESETBOTH; + uart_wr(S3C2410_UFCON, fifocon); + + /* wait for fifo reset to complete */ + while (1) { + fifocon = uart_rd(S3C2410_UFCON); + if (!(fifocon & S3C2410_UFCON_RESETBOTH)) + break; + } + } +} +#else +#define arch_enable_uart_fifo() do { } while(0) +#endif + +static void arch_decomp_setup(void) +{ + /* + * we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_detect_cpu(); + arch_decomp_wdog_start(); + + /* + * Enable the UART FIFOs if they where not enabled and our + * configuration says we should turn them on. + */ + + arch_enable_uart_fifo(); +} + + + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h index e3f0eebf5205..97a9df38f1cf 100644 --- a/arch/arm/mach-s5p6440/include/mach/vmalloc.h +++ b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h @@ -1,4 +1,7 @@ -/* arch/arm/mach-s5p6440/include/mach/vmalloc.h +/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2010 Ben Dooks <ben-linux@fluff.org> * diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c new file mode 100644 index 000000000000..79833caf8165 --- /dev/null +++ b/arch/arm/mach-s5p64x0/init.c @@ -0,0 +1,73 @@ +/* linux/arch/arm/mach-s5p64x0/init.c + * + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Init support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s5p6440.h> +#include <plat/s5p6450.h> +#include <plat/regs-serial.h> + +static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = { + [0] = { + .name = "pclk_low", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "uclk1", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, +}; + +/* uart registration process */ + +void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + struct s3c2410_uartcfg *tcfg = cfg; + u32 ucnt; + + for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { + if (!tcfg->clocks) { + tcfg->clocks = s5p64x0_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks); + } + } +} + +void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + int uart; + + for (uart = 0; uart < no; uart++) { + s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart); + s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART; + } + + s5p64x0_common_init_uarts(cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} + +void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s5p64x0_common_init_uarts(cfg, no); + s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); +} diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 9202aaac3b56..28de0a57208c 100644 --- a/arch/arm/mach-s5p6440/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c +/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,21 +21,22 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/irq.h> +#include <asm/mach-types.h> #include <mach/hardware.h> #include <mach/map.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> +#include <mach/regs-clock.h> +#include <mach/i2c.h> #include <plat/regs-serial.h> - +#include <plat/gpio-cfg.h> #include <plat/s5p6440.h> #include <plat/clock.h> -#include <mach/regs-clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> @@ -58,43 +59,60 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 0, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 1, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 2, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDK6440_UCON_DEFAULT, - .ulcon = SMDK6440_ULCON_DEFAULT, - .ufcon = SMDK6440_UFCON_DEFAULT, + .hwport = 3, + .flags = 0, + .ucon = SMDK6440_UCON_DEFAULT, + .ulcon = SMDK6440_ULCON_DEFAULT, + .ufcon = SMDK6440_UFCON_DEFAULT, }, }; static struct platform_device *smdk6440_devices[] __initdata = { - &s5p6440_device_iis, &s3c_device_adc, &s3c_device_rtc, &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_ts, &s3c_device_wdt, + &s5p6440_device_iis, +}; + +static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6440_i2c0_cfg_gpio, +}; + +static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6440_i2c1_cfg_gpio, }; static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { @@ -113,7 +131,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { static void __init smdk6440_map_io(void) { - s5p_init_io(NULL, 0, S5P_SYS_ID); + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); } @@ -122,9 +140,8 @@ static void __init smdk6440_machine_init(void) { s3c24xx_ts_set_platdata(&s3c_ts_platform); - /* I2C */ - s3c_i2c0_set_platdata(NULL); - s3c_i2c1_set_platdata(NULL); + s3c_i2c0_set_platdata(&s5p6440_i2c0_data); + s3c_i2c1_set_platdata(&s5p6440_i2c1_data); i2c_register_board_info(0, smdk6440_i2c_devs0, ARRAY_SIZE(smdk6440_i2c_devs0)); i2c_register_board_info(1, smdk6440_i2c_devs1, @@ -135,9 +152,9 @@ static void __init smdk6440_machine_init(void) MACHINE_START(SMDK6440, "SMDK6440") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .phys_io = S3C_PA_UART & 0xfff00000, + .phys_io = S5P6440_PA_UART(0) & 0xfff00000, .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, - .boot_params = S5P_PA_SDRAM + 0x100, + .boot_params = S5P64X0_PA_SDRAM + 0x100, .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c new file mode 100644 index 000000000000..8e982171418b --- /dev/null +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -0,0 +1,182 @@ +/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/i2c.h> + +#include <plat/regs-serial.h> +#include <plat/gpio-cfg.h> +#include <plat/s5p6450.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> +#include <plat/pll.h> +#include <plat/adc.h> +#include <plat/ts.h> + +#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_TXTRIG16 | \ + S3C2410_UFCON_RXTRIG8) + +static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 + [4] = { + .hwport = 4, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#endif +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 + [5] = { + .hwport = 5, + .flags = 0, + .ucon = SMDK6450_UCON_DEFAULT, + .ulcon = SMDK6450_ULCON_DEFAULT, + .ufcon = SMDK6450_UFCON_DEFAULT, + }, +#endif +}; + +static struct platform_device *smdk6450_devices[] __initdata = { + &s3c_device_adc, + &s3c_device_rtc, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_ts, + &s3c_device_wdt, + &s5p6450_device_iis0, + /* s5p6450_device_spi0 will be added */ +}; + +static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6450_i2c0_cfg_gpio, +}; + +static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, + .cfg_gpio = s5p6450_i2c1_cfg_gpio, +}; + +static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */ +}; + +static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + +static void __init smdk6450_map_io(void) +{ + s5p_init_io(NULL, 0, S5P64X0_SYS_ID); + s3c24xx_init_clocks(19200000); + s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); +} + +static void __init smdk6450_machine_init(void) +{ + s3c24xx_ts_set_platdata(&s3c_ts_platform); + + s3c_i2c0_set_platdata(&s5p6450_i2c0_data); + s3c_i2c1_set_platdata(&s5p6450_i2c1_data); + i2c_register_board_info(0, smdk6450_i2c_devs0, + ARRAY_SIZE(smdk6450_i2c_devs0)); + i2c_register_board_info(1, smdk6450_i2c_devs1, + ARRAY_SIZE(smdk6450_i2c_devs1)); + + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); +} + +MACHINE_START(SMDK6450, "SMDK6450") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .phys_io = S5P6450_PA_UART(0) & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P64X0_PA_SDRAM + 0x100, + + .init_irq = s5p6450_init_irq, + .map_io = smdk6450_map_io, + .init_machine = smdk6450_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c index 2c99d14f7ac7..dc4cc65a5019 100644 --- a/arch/arm/mach-s5p6440/setup-i2c0.c +++ b/arch/arm/mach-s5p64x0/setup-i2c0.c @@ -1,11 +1,11 @@ -/* linux/arch/arm/mach-s5p6440/setup-i2c0.c +/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * I2C0 GPIO configuration. * - * Based on plat-s3c64xx/setup-i2c0.c + * Based on plat-s3c64x0/setup-i2c0.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,17 +14,29 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ -#include <linux/gpio.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> -void s3c_i2c0_cfg_gpio(struct platform_device *dev) +#include <mach/i2c.h> + +void s5p6440_i2c0_cfg_gpio(struct platform_device *dev) { s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP); } + +void s5p6450_i2c0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP); +} + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5p6440/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c index 9a1537f786e0..2edd7912f8e4 100644 --- a/arch/arm/mach-s5p6440/setup-i2c1.c +++ b/arch/arm/mach-s5p64x0/setup-i2c1.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5p6440/setup-i2c1.c +/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * I2C1 GPIO configuration. * @@ -21,10 +21,22 @@ struct platform_device; /* don't need the contents */ #include <plat/gpio-cfg.h> #include <plat/iic.h> -void s3c_i2c1_cfg_gpio(struct platform_device *dev) +#include <mach/i2c.h> + +void s5p6440_i2c1_cfg_gpio(struct platform_device *dev) { s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6)); s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP); s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6)); s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP); } + +void s5p6450_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6)); + s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP); +} + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 77ae4bfb74ba..b8fbf2fcba6f 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -9,7 +9,6 @@ if ARCH_S5PC100 config CPU_S5PC100 bool - select PLAT_S5P select S5P_EXT_INT select S3C_PL330_DMA help diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index a021ed1fb4b6..eecab57d2e5d 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -11,7 +11,7 @@ obj- := # Core support for S5PC100 system -obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o irq-gpio.o +obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o obj-$(CONFIG_CPU_S5PC100) += dma.o diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index 251c92ac5b22..fd2708e7d8a9 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -1,5 +1,8 @@ /* linux/arch/arm/mach-s5pc100/cpu.c * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * @@ -21,6 +24,7 @@ #include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -56,11 +60,31 @@ static struct map_desc s5pc100_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PC100_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5PC100_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5PC100_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5P_PA_VIC2), + .pfn = __phys_to_pfn(S5PC100_PA_VIC2), .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5PC100_VA_OTHERS, .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), .length = SZ_4K, diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c index 0fab7f2cd8bf..def4ff83e051 100644 --- a/arch/arm/mach-s5pc100/gpiolib.c +++ b/arch/arm/mach-s5pc100/gpiolib.c @@ -61,30 +61,6 @@ * L3 8 4Bit None */ -static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - return S3C_IRQ_GPIO(chip->base + offset); -} - -static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) -{ - int base; - - base = chip->base - S5PC100_GPH0(0); - if (base == 0) - return IRQ_EINT(offset); - base = chip->base - S5PC100_GPH1(0); - if (base == 0) - return IRQ_EINT(8 + offset); - base = chip->base - S5PC100_GPH2(0); - if (base == 0) - return IRQ_EINT(16 + offset); - base = chip->base - S5PC100_GPH3(0); - if (base == 0) - return IRQ_EINT(24 + offset); - return -EINVAL; -} - static struct s3c_gpio_cfg gpio_cfg = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, @@ -228,34 +204,42 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { }, { .base = S5PC100_GPH0_BASE, .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(0), .chip = { .base = S5PC100_GPH0(0), .ngpio = S5PC100_GPIO_H0_NR, .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = S5PC100_GPH1_BASE, .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(8), .chip = { .base = S5PC100_GPH1(0), .ngpio = S5PC100_GPIO_H1_NR, .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = S5PC100_GPH2_BASE, .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(16), .chip = { .base = S5PC100_GPH2(0), .ngpio = S5PC100_GPIO_H2_NR, .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = S5PC100_GPH3_BASE, .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(24), .chip = { .base = S5PC100_GPH3(0), .ngpio = S5PC100_GPIO_H3_NR, .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = S5PC100_GPI_BASE, @@ -380,47 +364,25 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { }, }; -/* FIXME move from irq-gpio.c */ -extern struct irq_chip s5pc100_gpioint; -extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); - -static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip) -{ - /* Interrupt */ - if (chip->config == &gpio_cfg) { - int i, irq; - - chip->chip.to_irq = s5pc100_gpiolib_to_irq; - - for (i = 0; i < chip->chip.ngpio; i++) { - irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i; - set_irq_chip(irq, &s5pc100_gpioint); - set_irq_data(irq, &chip->chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - } else if (chip->config == &gpio_cfg_eint) { - chip->chip.to_irq = s5pc100_gpiolib_to_eint; - } -} - static __init int s5pc100_gpiolib_init(void) { struct s3c_gpio_chip *chip; int nr_chips; + int gpioint_group = 0; chip = s5pc100_gpio_chips; nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); - for (; nr_chips > 0; nr_chips--, chip++) - s5pc100_gpiolib_link(chip); + for (; nr_chips > 0; nr_chips--, chip++) { + if (chip->config == &gpio_cfg) { + /* gpio interrupts */ + chip->group = gpioint_group++; + } + } samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, ARRAY_SIZE(s5pc100_gpio_chips)); - /* Interrupt */ - set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler); - return 0; } core_initcall(s5pc100_gpiolib_init); diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index 71ae1f52df1d..29a8a12d9b4f 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -146,13 +146,6 @@ enum s5p_gpio_number { /* define the number of gpios we need to the one after the MP04() range */ #define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) -#define EINT_MODE S3C_GPIO_SFN(0x2) - -#define EINT_GPIO_0(x) S5PC100_GPH0(x) -#define EINT_GPIO_1(x) S5PC100_GPH1(x) -#define EINT_GPIO_2(x) S5PC100_GPH2(x) -#define EINT_GPIO_3(x) S5PC100_GPH3(x) - #include <asm-generic/gpio.h> #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index 06513e647242..e782dd6bcf60 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -100,11 +100,12 @@ #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) -#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) -#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) +/* GPIO interrupt */ +#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1) +#define S5P_GPIOINT_GROUP_MAXNR 21 -/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */ -#define NR_IRQS (S3C_IRQ_GPIO(320) + 1) +/* Set the default NR_IRQS */ +#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1) /* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 01b9134feff0..8751ef4a6804 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -44,19 +44,16 @@ #define S5PC100_PA_OTHERS (0xE0200000) #define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) -#define S5P_PA_GPIO (0xE0300000) +#define S5PC100_PA_GPIO (0xE0300000) #define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) /* Interrupt */ -#define S5PC100_PA_VIC (0xE4000000) +#define S5PC100_PA_VIC0 (0xE4000000) +#define S5PC100_PA_VIC1 (0xE4100000) +#define S5PC100_PA_VIC2 (0xE4200000) #define S5PC100_VA_VIC S3C_VA_IRQ -#define S5PC100_PA_VIC_OFFSET 0x100000 #define S5PC100_VA_VIC_OFFSET 0x10000 -#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET)) #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) -#define S5P_PA_VIC0 S5PC1XX_PA_VIC(0) -#define S5P_PA_VIC1 S5PC1XX_PA_VIC(1) -#define S5P_PA_VIC2 S5PC1XX_PA_VIC(2) #define S5PC100_PA_ONENAND (0xE7100000) diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h index dd6295e1251d..8c47536b117b 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h @@ -64,12 +64,12 @@ #define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) -/* values for S5P_EXTINT0 */ -#define S5P_EXTINT_LOWLEV (0x00) -#define S5P_EXTINT_HILEV (0x01) -#define S5P_EXTINT_FALLEDGE (0x02) -#define S5P_EXTINT_RISEEDGE (0x03) -#define S5P_EXTINT_BOTHEDGE (0x04) +#define EINT_MODE S3C_GPIO_SFN(0x2) + +#define EINT_GPIO_0(x) S5PC100_GPH0(x) +#define EINT_GPIO_1(x) S5PC100_GPH1(x) +#define EINT_GPIO_2(x) S5PC100_GPH2(x) +#define EINT_GPIO_3(x) S5PC100_GPH3(x) #endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/irq-gpio.c b/arch/arm/mach-s5pc100/irq-gpio.c deleted file mode 100644 index 2bf86c18bc73..000000000000 --- a/arch/arm/mach-s5pc100/irq-gpio.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - * arch/arm/mach-s5pc100/irq-gpio.c - * - * Copyright (C) 2009 Samsung Electronics - * - * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <plat/gpio-cfg.h> - -#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x)) - -#define CON_OFFSET 0x700 -#define MASK_OFFSET 0x900 -#define PEND_OFFSET 0xA00 -#define CON_OFFSET_2 0xE00 -#define MASK_OFFSET_2 0xF00 -#define PEND_OFFSET_2 0xF40 - -#define GPIOINT_LEVEL_LOW 0x0 -#define GPIOINT_LEVEL_HIGH 0x1 -#define GPIOINT_EDGE_FALLING 0x2 -#define GPIOINT_EDGE_RISING 0x3 -#define GPIOINT_EDGE_BOTH 0x4 - -static int group_to_con_offset(int group) -{ - return group << 2; -} - -static int group_to_mask_offset(int group) -{ - return group << 2; -} - -static int group_to_pend_offset(int group) -{ - return group << 2; -} - -static int s5pc100_get_start(unsigned int group) -{ - switch (group) { - case 0: return S5PC100_GPIO_A0_START; - case 1: return S5PC100_GPIO_A1_START; - case 2: return S5PC100_GPIO_B_START; - case 3: return S5PC100_GPIO_C_START; - case 4: return S5PC100_GPIO_D_START; - case 5: return S5PC100_GPIO_E0_START; - case 6: return S5PC100_GPIO_E1_START; - case 7: return S5PC100_GPIO_F0_START; - case 8: return S5PC100_GPIO_F1_START; - case 9: return S5PC100_GPIO_F2_START; - case 10: return S5PC100_GPIO_F3_START; - case 11: return S5PC100_GPIO_G0_START; - case 12: return S5PC100_GPIO_G1_START; - case 13: return S5PC100_GPIO_G2_START; - case 14: return S5PC100_GPIO_G3_START; - case 15: return S5PC100_GPIO_I_START; - case 16: return S5PC100_GPIO_J0_START; - case 17: return S5PC100_GPIO_J1_START; - case 18: return S5PC100_GPIO_J2_START; - case 19: return S5PC100_GPIO_J3_START; - case 20: return S5PC100_GPIO_J4_START; - default: - BUG(); - } - - return -EINVAL; -} - -static int s5pc100_get_group(unsigned int irq) -{ - irq -= S3C_IRQ_GPIO(0); - - switch (irq) { - case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1: - return 0; - case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1: - return 1; - case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1: - return 2; - case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1: - return 3; - case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1: - return 4; - case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1: - return 5; - case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1: - return 6; - case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1: - return 7; - case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1: - return 8; - case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1: - return 9; - case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1: - return 10; - case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1: - return 11; - case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1: - return 12; - case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1: - return 13; - case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1: - return 14; - case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1: - return 15; - case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1: - return 16; - case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1: - return 17; - case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1: - return 18; - case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1: - return 19; - case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1: - return 20; - default: - BUG(); - } - - return -EINVAL; -} - -static int s5pc100_get_offset(unsigned int irq) -{ - struct gpio_chip *chip = get_irq_data(irq); - return irq - S3C_IRQ_GPIO(chip->base); -} - -static void s5pc100_gpioint_ack(unsigned int irq) -{ - int group, offset, pend_offset; - unsigned int value; - - group = s5pc100_get_group(irq); - offset = s5pc100_get_offset(irq); - pend_offset = group_to_pend_offset(group); - - value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset); - value |= 1 << offset; - __raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset); -} - -static void s5pc100_gpioint_mask(unsigned int irq) -{ - int group, offset, mask_offset; - unsigned int value; - - group = s5pc100_get_group(irq); - offset = s5pc100_get_offset(irq); - mask_offset = group_to_mask_offset(group); - - value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); - value |= 1 << offset; - __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset); -} - -static void s5pc100_gpioint_unmask(unsigned int irq) -{ - int group, offset, mask_offset; - unsigned int value; - - group = s5pc100_get_group(irq); - offset = s5pc100_get_offset(irq); - mask_offset = group_to_mask_offset(group); - - value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); - value &= ~(1 << offset); - __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset); -} - -static void s5pc100_gpioint_mask_ack(unsigned int irq) -{ - s5pc100_gpioint_mask(irq); - s5pc100_gpioint_ack(irq); -} - -static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type) -{ - int group, offset, con_offset; - unsigned int value; - - group = s5pc100_get_group(irq); - offset = s5pc100_get_offset(irq); - con_offset = group_to_con_offset(group); - - switch (type) { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No irq type\n"); - return -EINVAL; - case IRQ_TYPE_EDGE_RISING: - type = GPIOINT_EDGE_RISING; - break; - case IRQ_TYPE_EDGE_FALLING: - type = GPIOINT_EDGE_FALLING; - break; - case IRQ_TYPE_EDGE_BOTH: - type = GPIOINT_EDGE_BOTH; - break; - case IRQ_TYPE_LEVEL_HIGH: - type = GPIOINT_LEVEL_HIGH; - break; - case IRQ_TYPE_LEVEL_LOW: - type = GPIOINT_LEVEL_LOW; - break; - default: - BUG(); - } - - - value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset); - value &= ~(0xf << (offset * 0x4)); - value |= (type << (offset * 0x4)); - __raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset); - - return 0; -} - -struct irq_chip s5pc100_gpioint = { - .name = "GPIO", - .ack = s5pc100_gpioint_ack, - .mask = s5pc100_gpioint_mask, - .mask_ack = s5pc100_gpioint_mask_ack, - .unmask = s5pc100_gpioint_unmask, - .set_type = s5pc100_gpioint_set_type, -}; - -void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) -{ - int group, offset, pend_offset, mask_offset; - int real_irq, group_end; - unsigned int pend, mask; - - group_end = 21; - - for (group = 0; group < group_end; group++) { - pend_offset = group_to_pend_offset(group); - pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset); - if (!pend) - continue; - - mask_offset = group_to_mask_offset(group); - mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); - pend &= ~mask; - - for (offset = 0; offset < 8; offset++) { - if (pend & (1 << offset)) { - real_irq = s5pc100_get_start(group) + offset; - generic_handle_irq(S3C_IRQ_GPIO(real_irq)); - } - } - } -} diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index d3a38955c741..60942d629749 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,9 +11,9 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select PLAT_S5P select S3C_PL330_DMA select S5P_EXT_INT + select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -53,17 +53,11 @@ config S5PV210_SETUP_SDHCI_GPIO help Common setup code for SDHCI gpio. -config S5PC110_DEV_ONENAND - bool - help - Compile in platform device definition for OneNAND1 controller - menu "S5PC110 Machines" config MACH_AQUILA bool "Aquila" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -71,7 +65,7 @@ config MACH_AQUILA select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 - select S5PC110_DEV_ONENAND + select S5P_DEV_ONENAND select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_SDHCI help @@ -80,7 +74,7 @@ config MACH_AQUILA config MACH_GONI bool "GONI" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE + select S5P_GPIO_INT select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -88,8 +82,15 @@ config MACH_GONI select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 - select S5PC110_DEV_ONENAND + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S5P_DEV_ONENAND + select S3C_DEV_USB_HSOTG + select SAMSUNG_DEV_KEYPAD select S5PV210_SETUP_FB_24BPP + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI help Machine support for Samsung GONI board @@ -98,7 +99,6 @@ config MACH_GONI config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC @@ -118,7 +118,6 @@ menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -139,6 +138,29 @@ config MACH_SMDKV210 help Machine support for Samsung SMDKV210 +config MACH_TORBRECK + bool "Torbreck" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_SDHCI + help + Machine support for aESOP Torbreck + endmenu +config S5PV210_PM + bool + help + Power Management code common to S5PV210 + endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 05048c5aa4c6..157754f0a919 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -14,6 +14,7 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o +obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o # machine support @@ -21,12 +22,12 @@ obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o obj-$(CONFIG_MACH_GONI) += mach-goni.o +obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o # device support obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o -obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index cfecd70657cb..d562670e1b0b 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -173,11 +173,6 @@ static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); } -static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable); -} - static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable); diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 77f456c91ad3..8eb480e201b0 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/mach-s5pv210/cpu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/sysdev.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -50,6 +51,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PV210_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC0, + .pfn = __phys_to_pfn(S5PV210_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)VA_VIC1, + .pfn = __phys_to_pfn(S5PV210_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)VA_VIC2, .pfn = __phys_to_pfn(S5PV210_PA_VIC2), .length = SZ_16K, @@ -60,10 +76,30 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .length = SZ_16K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_SROMC, .pfn = __phys_to_pfn(S5PV210_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(S5PV210_PA_DMC0), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC1, + .pfn = __phys_to_pfn(S5PV210_PA_DMC1), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_USB_HSPHY, + .pfn =__phys_to_pfn(S5PV210_PA_HSPHY), + .length = SZ_4K, + .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c index 0d459112d039..ab673effd767 100644 --- a/arch/arm/mach-s5pv210/gpiolib.c +++ b/arch/arm/mach-s5pv210/gpiolib.c @@ -150,6 +150,7 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { .label = "GPG3", }, }, { + .config = &gpio_cfg_noint, .chip = { .base = S5PV210_GPI(0), .ngpio = S5PV210_GPIO_I_NR, @@ -223,34 +224,42 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { }, { .base = (S5P_VA_GPIO + 0xC00), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), .chip = { .base = S5PV210_GPH0(0), .ngpio = S5PV210_GPIO_H0_NR, .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC20), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), .chip = { .base = S5PV210_GPH1(0), .ngpio = S5PV210_GPIO_H1_NR, .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC40), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), .chip = { .base = S5PV210_GPH2(0), .ngpio = S5PV210_GPIO_H2_NR, .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC60), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), .chip = { .base = S5PV210_GPH3(0), .ngpio = S5PV210_GPIO_H3_NR, .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, }, }, }; @@ -259,11 +268,14 @@ static __init int s5pv210_gpiolib_init(void) { struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); + int gpioint_group = 0; int i = 0; for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) + if (chip->config == NULL) { chip->config = &gpio_cfg; + chip->group = gpioint_group++; + } if (chip->base == NULL) chip->base = S5PV210_BANK_BASE(i); } diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index e1c020e5a49b..bb7f277c1fa3 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -109,7 +109,7 @@ #define IRQ_IPC S5P_IRQ_VIC3(0) #define IRQ_HOSTIF S5P_IRQ_VIC3(1) -#define IRQ_MMC3 S5P_IRQ_VIC3(2) +#define IRQ_HSMMC3 S5P_IRQ_VIC3(2) #define IRQ_CEC S5P_IRQ_VIC3(3) #define IRQ_TSI S5P_IRQ_VIC3(4) #define IRQ_MDNIE0 S5P_IRQ_VIC3(5) @@ -121,8 +121,12 @@ #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) +/* GPIO interrupt */ +#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1) +#define S5P_GPIOINT_GROUP_MAXNR 22 + /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT(31) + 1) +#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1) /* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index dd4fb6bf14b5..12a409f964ca 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -17,7 +17,10 @@ #include <plat/map-s5p.h> #define S5PC110_PA_ONENAND (0xB0000000) +#define S5P_PA_ONENAND S5PC110_PA_ONENAND + #define S5PC110_PA_ONENAND_DMA (0xB0600000) +#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA #define S5PV210_PA_CHIPID (0xE0000000) #define S5P_PA_CHIPID S5PV210_PA_CHIPID @@ -26,7 +29,6 @@ #define S5P_PA_SYSCON S5PV210_PA_SYSCON #define S5PV210_PA_GPIO (0xE0200000) -#define S5P_PA_GPIO S5PV210_PA_GPIO /* SPI */ #define S5PV210_PA_SPI0 0xE1300000 @@ -71,17 +73,13 @@ #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) -#define S5PV210_PA_VIC0 (0xF2000000) -#define S5P_PA_VIC0 S5PV210_PA_VIC0 +#define S5PV210_PA_HSOTG (0xEC000000) +#define S5PV210_PA_HSPHY (0xEC100000) +#define S5PV210_PA_VIC0 (0xF2000000) #define S5PV210_PA_VIC1 (0xF2100000) -#define S5P_PA_VIC1 S5PV210_PA_VIC1 - #define S5PV210_PA_VIC2 (0xF2200000) -#define S5P_PA_VIC2 S5PV210_PA_VIC2 - #define S5PV210_PA_VIC3 (0xF2300000) -#define S5P_PA_VIC3 S5PV210_PA_VIC3 #define S5PV210_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5PV210_PA_SDRAM @@ -101,6 +99,9 @@ #define S5PV210_PA_ADC (0xE1700000) +#define S5PV210_PA_DMC0 (0xF0000000) +#define S5PV210_PA_DMC1 (0xF1400000) + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) @@ -113,6 +114,7 @@ #define S3C_PA_FB S5PV210_PA_FB #define S3C_PA_RTC S5PV210_PA_RTC #define S3C_PA_WDT S5PV210_PA_WATCHDOG +#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG #define S5P_PA_FIMC0 S5PV210_PA_FIMC0 #define S5P_PA_FIMC1 S5PV210_PA_FIMC1 #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h new file mode 100644 index 000000000000..e8d394f8b057 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -0,0 +1,43 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h, + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +static inline void s3c_pm_debug_init_uart(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); + __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 499aef737476..929fd3a33f8a 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -95,7 +95,7 @@ /* Registers related to power management */ #define S5P_PWR_CFG S5P_CLKREG(0xC000) #define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004) -#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) +#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) #define S5P_PWR_MODE S5P_CLKREG(0xC00C) #define S5P_NORMAL_CFG S5P_CLKREG(0xC010) #define S5P_IDLE_CFG S5P_CLKREG(0xC020) @@ -159,8 +159,11 @@ #define S5P_SLEEP_CFG_USBOSC_EN (1 << 1) /* OTHERS Resgister */ +#define S5P_OTHERS_RET_IO (1 << 31) +#define S5P_OTHERS_RET_CF (1 << 30) +#define S5P_OTHERS_RET_MMC (1 << 29) +#define S5P_OTHERS_RET_UART (1 << 28) #define S5P_OTHERS_USB_SIG_MASK (1 << 16) -#define S5P_OTHERS_MIPI_DPHY_EN (1 << 28) /* MIPI */ #define S5P_MIPI_DPHY_EN (3) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h index 49e029b4978a..de0c89976078 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -31,13 +31,6 @@ #define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) -/* values for S5P_EXTINT0 */ -#define S5P_EXTINT_LOWLEV (0x00) -#define S5P_EXTINT_HILEV (0x01) -#define S5P_EXTINT_FALLEDGE (0x02) -#define S5P_EXTINT_RISEEDGE (0x03) -#define S5P_EXTINT_BOTHEDGE (0x04) - #define EINT_MODE S3C_GPIO_SFN(0xf) #define EINT_GPIO_0(x) S5PV210_GPH0(x) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h new file mode 100644 index 000000000000..26691d39d0f4 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-sys.h @@ -0,0 +1,19 @@ +/* arch/arm/mach-s5pv210/include/mach/regs-sys.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - System registers definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) +#define S5PV210_USB_PHY0_EN (1 << 0) +#define S5PV210_USB_PHY1_EN (1 << 1) + +/* compatibility defines for s3c-hsotg driver */ +#define S3C64XX_OTHERS S5PV210_USB_PHY_CON +#define S3C64XX_OTHERS_USBMASK S5PV210_USB_PHY0_EN diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 0dda8012d6b2..bf772de6b0c3 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -477,7 +477,7 @@ static struct platform_device *aquila_devices[] __initdata = { &aquila_i2c_gpio_pmic, &aquila_device_gpiokeys, &s3c_device_fb, - &s5pc110_device_onenand, + &s5p_device_onenand, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 53754d7d364e..1bae3f13f0a0 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -15,7 +15,12 @@ #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/i2c/qt602240_ts.h> #include <linux/mfd/max8998.h> +#include <linux/regulator/fixed.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/lcd.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> @@ -35,7 +40,10 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> +#include <plat/iic.h> +#include <plat/keypad.h> #include <plat/sdhci.h> +#include <plat/clock.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -87,13 +95,12 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win goni_fb_win0 = { .win_mode = { - .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55), .left_margin = 16, .right_margin = 16, - .upper_margin = 3, + .upper_margin = 2, .lower_margin = 28, .hsync_len = 2, - .vsync_len = 2, + .vsync_len = 1, .xres = 480, .yres = 800, .refresh = 55, @@ -111,9 +118,160 @@ static struct s3c_fb_platdata goni_lcd_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +static int lcd_power_on(struct lcd_device *ld, int enable) +{ + return 1; +} + +static int reset_lcd(struct lcd_device *ld) +{ + static unsigned int first = 1; + int reset_gpio = -1; + + reset_gpio = S5PV210_MP05(5); + + if (first) { + gpio_request(reset_gpio, "MLCD_RST"); + first = 0; + } + + gpio_direction_output(reset_gpio, 1); + return 1; +} + +static struct lcd_platform_data goni_lcd_platform_data = { + .reset = reset_lcd, + .power_on = lcd_power_on, + .lcd_enabled = 0, + .reset_delay = 120, /* 120ms */ + .power_on_delay = 25, /* 25ms */ + .power_off_delay = 200, /* 200ms */ +}; + +#define LCD_BUS_NUM 3 +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "s6e63m0", + .platform_data = &goni_lcd_platform_data, + .max_speed_hz = 1200000, + .bus_num = LCD_BUS_NUM, + .chip_select = 0, + .mode = SPI_MODE_3, + .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */ + }, +}; + +static struct spi_gpio_platform_data lcd_spi_gpio_data = { + .sck = S5PV210_MP04(1), /* DISPLAY_CLK */ + .mosi = S5PV210_MP04(3), /* DISPLAY_SI */ + .miso = SPI_GPIO_NO_MISO, + .num_chipselect = 1, +}; + +static struct platform_device goni_spi_gpio = { + .name = "spi_gpio", + .id = LCD_BUS_NUM, + .dev = { + .parent = &s3c_device_fb.dev, + .platform_data = &lcd_spi_gpio_data, + }, +}; + +/* KEYPAD */ +static uint32_t keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 1, KEY_MENU), /* Send */ + KEY(0, 2, KEY_BACK), /* End */ + KEY(1, 1, KEY_CONFIG), /* Half shot */ + KEY(1, 2, KEY_VOLUMEUP), + KEY(2, 1, KEY_CAMERA), /* Full shot */ + KEY(2, 2, KEY_VOLUMEDOWN), +}; + +static struct matrix_keymap_data keymap_data __initdata = { + .keymap = keymap, + .keymap_size = ARRAY_SIZE(keymap), +}; + +static struct samsung_keypad_platdata keypad_data __initdata = { + .keymap_data = &keymap_data, + .rows = 3, + .cols = 3, +}; + +/* Radio */ +static struct i2c_board_info i2c1_devs[] __initdata = { + { + I2C_BOARD_INFO("si470x", 0x10), + }, +}; + +static void __init goni_radio_init(void) +{ + int gpio; + + gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */ + gpio_request(gpio, "FM_INT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + i2c1_devs[0].irq = gpio_to_irq(gpio); + + gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */ + gpio_request(gpio, "FM_RST"); + gpio_direction_output(gpio, 1); +} + +/* TSP */ +static struct qt602240_platform_data qt602240_platform_data = { + .x_line = 17, + .y_line = 11, + .x_size = 800, + .y_size = 480, + .blen = 0x21, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = QT602240_DIAGONAL, +}; + +static struct s3c2410_platform_i2c i2c2_data __initdata = { + .flags = 0, + .bus_num = 2, + .slave_addr = 0x10, + .frequency = 400 * 1000, + .sda_delay = 100, +}; + +static struct i2c_board_info i2c2_devs[] __initdata = { + { + I2C_BOARD_INFO("qt602240_ts", 0x4a), + .platform_data = &qt602240_platform_data, + }, +}; + +static void __init goni_tsp_init(void) +{ + int gpio; + + gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */ + gpio_request(gpio, "TSP_LDO_ON"); + gpio_direction_output(gpio, 1); + gpio_export(gpio, 0); + + gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */ + gpio_request(gpio, "TSP_INT"); + + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + i2c2_devs[0].irq = gpio_to_irq(gpio); +} + /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) +static struct regulator_consumer_supply goni_ldo5_consumers[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), +}; + static struct regulator_init_data goni_ldo2_data = { .constraints = { .name = "VALIVE_1.1V", @@ -153,6 +311,8 @@ static struct regulator_init_data goni_ldo5_data = { .max_uV = 2800000, .apply_uV = 1, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers), + .consumer_supplies = goni_ldo5_consumers, }; static struct regulator_init_data goni_ldo6_data = { @@ -444,11 +604,37 @@ static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = { .ext_cd_gpio_invert = 1, }; +static struct regulator_consumer_supply mmc2_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), +}; + +static struct regulator_init_data mmc2_fixed_voltage_init_data = { + .constraints = { + .name = "V_TF_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies), + .consumer_supplies = mmc2_supplies, +}; + +static struct fixed_voltage_config mmc2_fixed_voltage_config = { + .supply_name = "EXT_FLASH_EN", + .microvolts = 2800000, + .gpio = GONI_EXT_FLASH_EN, + .enable_high = true, + .init_data = &mmc2_fixed_voltage_init_data, +}; + +static struct platform_device mmc2_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &mmc2_fixed_voltage_config, + }, +}; + static void goni_setup_sdhci(void) { - gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN"); - gpio_direction_output(GONI_EXT_FLASH_EN, 1); - s3c_sdhci0_set_platdata(&goni_hsmmc0_data); s3c_sdhci1_set_platdata(&goni_hsmmc1_data); s3c_sdhci2_set_platdata(&goni_hsmmc2_data); @@ -456,8 +642,10 @@ static void goni_setup_sdhci(void) static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, - &s5pc110_device_onenand, + &s5p_device_onenand, + &goni_spi_gpio, &goni_i2c_gpio_pmic, + &mmc2_fixed_voltage, &goni_device_gpiokeys, &s5p_device_fimc0, &s5p_device_fimc1, @@ -465,6 +653,10 @@ static struct platform_device *goni_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, + &s3c_device_usb_hsotg, + &samsung_device_keypad, + &s3c_device_i2c1, + &s3c_device_i2c2, }; static void __init goni_map_io(void) @@ -476,6 +668,20 @@ static void __init goni_map_io(void) static void __init goni_machine_init(void) { + /* Radio: call before I2C 1 registeration */ + goni_radio_init(); + + /* I2C1 */ + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + + /* TSP: call before I2C 2 registeration */ + goni_tsp_init(); + + /* I2C2 */ + s3c_i2c2_set_platdata(&i2c2_data); + i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs)); + /* PMIC */ goni_pmic_init(); i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, @@ -486,6 +692,14 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); + /* SPI */ + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + + /* KEYPAD */ + samsung_keypad_set_platdata(&keypad_data); + + clk_xusbxti.rate = 24000000; + platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); } diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 8211bb87c54b..053b50ddcfaa 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -28,6 +28,7 @@ #include <plat/cpu.h> #include <plat/ata.h> #include <plat/iic.h> +#include <plat/pm.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -110,6 +111,8 @@ static void __init smdkc110_map_io(void) static void __init smdkc110_machine_init(void) { + s3c_pm_init(); + s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_i2c2_set_platdata(NULL); diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index fbbc0a3c3738..5a9c79cb63bd 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -31,6 +31,7 @@ #include <plat/ata.h> #include <plat/iic.h> #include <plat/keypad.h> +#include <plat/pm.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -145,6 +146,8 @@ static void __init smdkv210_map_io(void) static void __init smdkv210_machine_init(void) { + s3c_pm_init(); + samsung_keypad_set_platdata(&smdkv210_keypad_data); s3c24xx_ts_set_platdata(&s3c_ts_platform); diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c new file mode 100644 index 000000000000..31422507c890 --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -0,0 +1,133 @@ +/* linux/arch/arm/mach-s5pv210/mach-torbreck.c + * + * Copyright (c) 2010 aESOP Community + * http://www.aesop.or.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define TORBRECK_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define TORBRECK_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, +}; + +static struct platform_device *torbreck_devices[] __initdata = { + &s5pv210_device_iis0, + &s3c_device_cfcon, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c2, + &s3c_device_rtc, + &s3c_device_wdt, +}; + +static struct i2c_board_info torbreck_i2c_devs0[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info torbreck_i2c_devs1[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info torbreck_i2c_devs2[] __initdata = { + /* To Be Updated */ +}; + +static void __init torbreck_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); +} + +static void __init torbreck_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + s3c_i2c2_set_platdata(NULL); + i2c_register_board_info(0, torbreck_i2c_devs0, + ARRAY_SIZE(torbreck_i2c_devs0)); + i2c_register_board_info(1, torbreck_i2c_devs1, + ARRAY_SIZE(torbreck_i2c_devs1)); + i2c_register_board_info(2, torbreck_i2c_devs2, + ARRAY_SIZE(torbreck_i2c_devs2)); + + platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices)); +} + +MACHINE_START(TORBRECK, "TORBRECK") + /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = torbreck_map_io, + .init_machine = torbreck_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c new file mode 100644 index 000000000000..549d7924fd4c --- /dev/null +++ b/arch/arm/mach-s5pv210/pm.c @@ -0,0 +1,166 @@ +/* linux/arch/arm/mach-s5pv210/pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 - Power Management support + * + * Based on arch/arm/mach-s3c2410/pm.c + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/io.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/regs-timer.h> + +#include <mach/regs-irq.h> +#include <mach/regs-clock.h> + +static struct sleep_save s5pv210_core_save[] = { + /* Clock source */ + SAVE_ITEM(S5P_CLK_SRC0), + SAVE_ITEM(S5P_CLK_SRC1), + SAVE_ITEM(S5P_CLK_SRC2), + SAVE_ITEM(S5P_CLK_SRC3), + SAVE_ITEM(S5P_CLK_SRC4), + SAVE_ITEM(S5P_CLK_SRC5), + SAVE_ITEM(S5P_CLK_SRC6), + + /* Clock source Mask */ + SAVE_ITEM(S5P_CLK_SRC_MASK0), + SAVE_ITEM(S5P_CLK_SRC_MASK1), + + /* Clock Divider */ + SAVE_ITEM(S5P_CLK_DIV0), + SAVE_ITEM(S5P_CLK_DIV1), + SAVE_ITEM(S5P_CLK_DIV2), + SAVE_ITEM(S5P_CLK_DIV3), + SAVE_ITEM(S5P_CLK_DIV4), + SAVE_ITEM(S5P_CLK_DIV5), + SAVE_ITEM(S5P_CLK_DIV6), + SAVE_ITEM(S5P_CLK_DIV7), + + /* Clock Main Gate */ + SAVE_ITEM(S5P_CLKGATE_MAIN0), + SAVE_ITEM(S5P_CLKGATE_MAIN1), + SAVE_ITEM(S5P_CLKGATE_MAIN2), + + /* Clock source Peri Gate */ + SAVE_ITEM(S5P_CLKGATE_PERI0), + SAVE_ITEM(S5P_CLKGATE_PERI1), + + /* Clock source SCLK Gate */ + SAVE_ITEM(S5P_CLKGATE_SCLK0), + SAVE_ITEM(S5P_CLKGATE_SCLK1), + + /* Clock IP Clock gate */ + SAVE_ITEM(S5P_CLKGATE_IP0), + SAVE_ITEM(S5P_CLKGATE_IP1), + SAVE_ITEM(S5P_CLKGATE_IP2), + SAVE_ITEM(S5P_CLKGATE_IP3), + SAVE_ITEM(S5P_CLKGATE_IP4), + + /* Clock Blcok and Bus gate */ + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKGATE_BUS0), + + /* Clock ETC */ + SAVE_ITEM(S5P_CLK_OUT), + SAVE_ITEM(S5P_MDNIE_SEL), + + /* PWM Register */ + SAVE_ITEM(S3C2410_TCFG0), + SAVE_ITEM(S3C2410_TCFG1), + SAVE_ITEM(S3C64XX_TINT_CSTAT), + SAVE_ITEM(S3C2410_TCON), + SAVE_ITEM(S3C2410_TCNTB(0)), + SAVE_ITEM(S3C2410_TCMPB(0)), + SAVE_ITEM(S3C2410_TCNTO(0)), +}; + +void s5pv210_cpu_suspend(void) +{ + unsigned long tmp; + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "wfi" : : "r" (tmp)); + + /* we should never get past here */ + panic("sleep resumed to originator?"); +} + +static void s5pv210_pm_prepare(void) +{ + unsigned int tmp; + + /* ensure at least INFORM0 has the resume address */ + __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0); + + tmp = __raw_readl(S5P_SLEEP_CFG); + tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN); + __raw_writel(tmp, S5P_SLEEP_CFG); + + /* WFI for SLEEP mode configuration by SYSCON */ + tmp = __raw_readl(S5P_PWR_CFG); + tmp &= S5P_CFG_WFI_CLEAN; + tmp |= S5P_CFG_WFI_SLEEP; + __raw_writel(tmp, S5P_PWR_CFG); + + /* SYSCON interrupt handling disable */ + tmp = __raw_readl(S5P_OTHERS); + tmp |= S5P_OTHER_SYSC_INTOFF; + __raw_writel(tmp, S5P_OTHERS); + + s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); +} + +static int s5pv210_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s5pv210_pm_prepare; + pm_cpu_sleep = s5pv210_cpu_suspend; + + return 0; +} + +static int s5pv210_pm_resume(struct sys_device *dev) +{ + u32 tmp; + + tmp = __raw_readl(S5P_OTHERS); + tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\ + S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART); + __raw_writel(tmp , S5P_OTHERS); + + s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); + + return 0; +} + +static struct sysdev_driver s5pv210_pm_driver = { + .add = s5pv210_pm_add, + .resume = s5pv210_pm_resume, +}; + +static __init int s5pv210_pm_drvinit(void) +{ + return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver); +} +arch_initcall(s5pv210_pm_drvinit); diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S new file mode 100644 index 000000000000..d4d222b716b4 --- /dev/null +++ b/arch/arm/mach-s5pv210/sleep.S @@ -0,0 +1,170 @@ +/* linux/arch/arm/plat-s5p/sleep.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 power Manager (Suspend-To-RAM) support + * Based on S3C2410 sleep code by: + * Ben Dooks, (c) 2004 Simtec Electronics + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/memory.h> + + .text + + /* s3c_cpu_save + * + * entry: + * r0 = save address (virtual addr of s3c_sleep_save_phys) + */ + +ENTRY(s3c_cpu_save) + + stmfd sp!, { r3 - r12, lr } + + mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control + mrc p15, 0, r9, c1, c0, 0 @ Control register + mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls + mrc p15, 0, r12, c10, c2, 0 @ Read PRRR + mrc p15, 0, r3, c10, c2, 1 @ READ NMRR + + stmia r0, { r3 - r13 } + + bl s3c_pm_cb_flushcache + + ldr r0, =pm_cpu_sleep + ldr r0, [ r0 ] + mov pc, r0 + +resume_with_mmu: + /* + * After MMU is turned on, restore the previous MMU table. + */ + ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET) + add r4, r4, r9 + str r12, [r4] + + ldmfd sp!, { r3 - r12, pc } + + .ltorg + + .data + + .global s3c_sleep_save_phys +s3c_sleep_save_phys: + .word 0 + + /* sleep magic, to allow the bootloader to check for an valid + * image to resume to. Must be the first word before the + * s3c_cpu_resume entry. + */ + + .word 0x2bedf00d + + /* s3c_cpu_resume + * + * resume code entry for bootloader to call + * + * we must put this code here in the data segment as we have no + * other way of restoring the stack pointer after sleep, and we + * must not write to the code segment (code is read-only) + */ + +ENTRY(s3c_cpu_resume) + mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE + msr cpsr_c, r0 + + mov r1, #0 + mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache + + ldr r0, s3c_sleep_save_phys @ address of restore block + ldmia r0, { r3 - r13 } + + mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + + mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control + mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + + mov r0, #0 + mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB + + mov r0, #0 @ restore copro access + mcr p15, 0, r11, c1, c0, 2 @ Co-processor access + mcr p15, 0, r0, c7, c5, 4 + + mcr p15, 0, r12, c10, c2, 0 @ write PRRR + mcr p15, 0, r3, c10, c2, 1 @ write NMRR + + /* + * In Cortex-A8, when MMU is turned on, the pipeline is flushed. + * And there are no valid entries in the MMU table at this point. + * So before turning on the MMU, the MMU entry for the DRAM address + * range is added. After the MMU is turned on, the other entries + * in the MMU table will be restored. + */ + + /* r6 = Translation Table BASE0 */ + mov r4, r6 + mov r4, r4, LSR #14 + mov r4, r4, LSL #14 + + /* Load address for adding to MMU table list */ + ldr r11, =0xE010F000 @ INFORM0 reg. + ldr r10, [r11, #0] + mov r10, r10, LSR #18 + bic r10, r10, #0x3 + orr r4, r4, r10 + + /* Calculate MMU table entry */ + mov r10, r10, LSL #18 + ldr r5, =0x40E + orr r10, r10, r5 + + /* Back up originally data */ + ldr r12, [r4] + + /* Add calculated MMU table entry into MMU table list */ + str r10, [r4] + + ldr r2, =resume_with_mmu + mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc + + nop + nop + nop + nop + nop @ second-to-last before mmu + + mov pc, r2 @ go back to virtual address + + .ltorg diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig index 331b5bd97aba..9941852b7a06 100644 --- a/arch/arm/mach-s5pv310/Kconfig +++ b/arch/arm/mach-s5pv310/Kconfig @@ -11,7 +11,6 @@ if ARCH_S5PV310 config CPU_S5PV310 bool - select PLAT_S5P help Enable S5PV310 CPU support @@ -27,19 +26,36 @@ config S5PV310_SETUP_I2C2 # machine support -config MACH_SMDKV310 - bool "SMDKV310" +menu "S5PC210 Machines" + +config MACH_SMDKC210 + bool "SMDKC210" select CPU_S5PV310 - select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_RTC + select S3C_DEV_WDT help - Machine support for Samsung SMDKV310 + Machine support for Samsung SMDKC210 + S5PC210(MCP) is one of package option of S5PV310 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_S5PV310 - select ARCH_SPARSEMEM_ENABLE help Machine support for Samsung Mobile Universal S5PC210 Reference Board. S5PC210(MCP) is one of package option of S5PV310 +endmenu + +menu "S5PV310 Machines" + +config MACH_SMDKV310 + bool "SMDKV310" + select CPU_S5PV310 + select S3C_DEV_RTC + select S3C_DEV_WDT + help + Machine support for Samsung SMDKV310 + +endmenu + endif diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile index d5b51c72340f..d17c8c7603c7 100644 --- a/arch/arm/mach-s5pv310/Makefile +++ b/arch/arm/mach-s5pv310/Makefile @@ -14,6 +14,7 @@ obj- := obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o @@ -21,6 +22,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o # machine support +obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c index 26a0f03df8ea..fdce2b48efc6 100644 --- a/arch/arm/mach-s5pv310/clock.c +++ b/arch/arm/mach-s5pv310/clock.c @@ -30,16 +30,92 @@ static struct clk clk_sclk_hdmi27m = { .rate = 27000000, }; +static struct clk clk_sclk_hdmiphy = { + .name = "sclk_hdmiphy", + .id = -1, +}; + +static struct clk clk_sclk_usbphy0 = { + .name = "sclk_usbphy0", + .id = -1, + .rate = 27000000, +}; + +static struct clk clk_sclk_usbphy1 = { + .name = "sclk_usbphy1", + .id = -1, +}; + +static int s5pv310_clksrc_mask_top_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); +} + +static int s5pv310_clksrc_mask_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable); +} + +static int s5pv310_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); +} + +static int s5pv310_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); +} + +static int s5pv310_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); +} + static int s5pv310_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable); } +static int s5pv310_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable); +} + +static int s5pv310_clk_ip_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); +} + +static int s5pv310_clk_ip_image_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable); +} + +static int s5pv310_clk_ip_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); +} + +static int s5pv310_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); +} + +static int s5pv310_clk_ip_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); +} + static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable); } +static int s5pv310_clk_ip_perir_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); +} + /* Core list of CMU_CPU side */ static struct clksrc_clk clk_mout_apll = { @@ -79,7 +155,7 @@ static struct clksrc_clk clk_mout_mpll = { }; static struct clk *clkset_moutcore_list[] = { - [0] = &clk_sclk_apll.clk, + [0] = &clk_mout_apll.clk, [1] = &clk_mout_mpll.clk, }; @@ -150,24 +226,6 @@ static struct clksrc_clk clk_periphclk = { .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 }, }; -static struct clksrc_clk clk_atclk = { - .clk = { - .name = "atclk", - .id = -1, - .parent = &clk_moutcore.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk clk_pclk_dbg = { - .clk = { - .name = "pclk_dbg", - .id = -1, - .parent = &clk_atclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 20, .size = 3 }, -}; - /* Core list of CMU_CORE side */ static struct clk *clkset_corebus_list[] = { @@ -186,7 +244,7 @@ static struct clksrc_clk clk_mout_corebus = { .id = -1, }, .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_CORE, .shift = 4, .size = 1 }, + .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 }, }; static struct clksrc_clk clk_sclk_dmc = { @@ -195,7 +253,7 @@ static struct clksrc_clk clk_sclk_dmc = { .id = -1, .parent = &clk_mout_corebus.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 12, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 }, }; static struct clksrc_clk clk_aclk_cored = { @@ -204,7 +262,7 @@ static struct clksrc_clk clk_aclk_cored = { .id = -1, .parent = &clk_sclk_dmc.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 16, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 }, }; static struct clksrc_clk clk_aclk_corep = { @@ -213,7 +271,7 @@ static struct clksrc_clk clk_aclk_corep = { .id = -1, .parent = &clk_aclk_cored.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 20, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 }, }; static struct clksrc_clk clk_aclk_acp = { @@ -222,7 +280,7 @@ static struct clksrc_clk clk_aclk_acp = { .id = -1, .parent = &clk_mout_corebus.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 0, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 }, }; static struct clksrc_clk clk_pclk_acp = { @@ -231,7 +289,7 @@ static struct clksrc_clk clk_pclk_acp = { .id = -1, .parent = &clk_aclk_acp.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 4, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 }, }; /* Core list of CMU_TOP side */ @@ -241,7 +299,7 @@ static struct clk *clkset_aclk_top_list[] = { [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_aclk_200 = { +static struct clksrc_sources clkset_aclk = { .sources = clkset_aclk_top_list, .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), }; @@ -251,52 +309,37 @@ static struct clksrc_clk clk_aclk_200 = { .name = "aclk_200", .id = -1, }, - .sources = &clkset_aclk_200, + .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 }, .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 }, }; -static struct clksrc_sources clkset_aclk_100 = { - .sources = clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), -}; - static struct clksrc_clk clk_aclk_100 = { .clk = { .name = "aclk_100", .id = -1, }, - .sources = &clkset_aclk_100, + .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 }, .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 }, }; -static struct clksrc_sources clkset_aclk_160 = { - .sources = clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), -}; - static struct clksrc_clk clk_aclk_160 = { .clk = { .name = "aclk_160", .id = -1, }, - .sources = &clkset_aclk_160, + .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 }, .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, }; -static struct clksrc_sources clkset_aclk_133 = { - .sources = clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), -}; - static struct clksrc_clk clk_aclk_133 = { .clk = { .name = "aclk_133", .id = -1, }, - .sources = &clkset_aclk_133, + .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 }, .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 }, }; @@ -315,6 +358,8 @@ static struct clksrc_clk clk_vpllsrc = { .clk = { .name = "vpll_src", .id = -1, + .enable = s5pv310_clksrc_mask_top_ctrl, + .ctrlbit = (1 << 0), }, .sources = &clkset_vpllsrc, .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 }, @@ -346,7 +391,175 @@ static struct clk init_clocks_disable[] = { .parent = &clk_aclk_100.clk, .enable = s5pv310_clk_ip_peril_ctrl, .ctrlbit = (1<<24), - } + }, { + .name = "csis", + .id = 0, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "csis", + .id = 1, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "fimc", + .id = 0, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "fimc", + .id = 1, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "fimc", + .id = 2, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "fimc", + .id = 3, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "fimd", + .id = 0, + .enable = s5pv310_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "fimd", + .id = 1, + .enable = s5pv310_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "hsmmc", + .id = 3, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "hsmmc", + .id = 4, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "sata", + .id = -1, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "adc", + .id = -1, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "rtc", + .id = -1, + .enable = s5pv310_clk_ip_perir_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "watchdog", + .id = -1, + .enable = s5pv310_clk_ip_perir_ctrl, + .ctrlbit = (1 << 14), + }, { + .name = "usbhost", + .id = -1, + .enable = s5pv310_clk_ip_fsys_ctrl , + .ctrlbit = (1 << 12), + }, { + .name = "otg", + .id = -1, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "spi", + .id = 0, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "spi", + .id = 1, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 2, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "fimg2d", + .id = -1, + .enable = s5pv310_clk_ip_image_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "i2c", + .id = 0, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "i2c", + .id = 1, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "i2c", + .id = 2, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "i2c", + .id = 3, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "i2c", + .id = 4, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "i2c", + .id = 5, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "i2c", + .id = 6, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = 7, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 13), + }, }; static struct clk init_clocks[] = { @@ -387,6 +600,9 @@ static struct clk *clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, [2] = &clk_sclk_hdmi27m, + [3] = &clk_sclk_usbphy0, + [4] = &clk_sclk_usbphy1, + [5] = &clk_sclk_hdmiphy, [6] = &clk_mout_mpll.clk, [7] = &clk_mout_epll.clk, [8] = &clk_sclk_vpll.clk, @@ -397,6 +613,104 @@ static struct clksrc_sources clkset_group = { .nr_sources = ARRAY_SIZE(clkset_group_list), }; +static struct clk *clkset_mout_g2d0_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_sclk_apll.clk, +}; + +static struct clksrc_sources clkset_mout_g2d0 = { + .sources = clkset_mout_g2d0_list, + .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list), +}; + +static struct clksrc_clk clk_mout_g2d0 = { + .clk = { + .name = "mout_g2d0", + .id = -1, + }, + .sources = &clkset_mout_g2d0, + .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 }, +}; + +static struct clk *clkset_mout_g2d1_list[] = { + [0] = &clk_mout_epll.clk, + [1] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_mout_g2d1 = { + .sources = clkset_mout_g2d1_list, + .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list), +}; + +static struct clksrc_clk clk_mout_g2d1 = { + .clk = { + .name = "mout_g2d1", + .id = -1, + }, + .sources = &clkset_mout_g2d1, + .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 }, +}; + +static struct clk *clkset_mout_g2d_list[] = { + [0] = &clk_mout_g2d0.clk, + [1] = &clk_mout_g2d1.clk, +}; + +static struct clksrc_sources clkset_mout_g2d = { + .sources = clkset_mout_g2d_list, + .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list), +}; + +static struct clksrc_clk clk_dout_mmc0 = { + .clk = { + .name = "dout_mmc0", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc1 = { + .clk = { + .name = "dout_mmc1", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc2 = { + .clk = { + .name = "dout_mmc2", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc3 = { + .clk = { + .name = "dout_mmc3", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc4 = { + .clk = { + .name = "dout_mmc4", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 }, +}; + static struct clksrc_clk clksrcs[] = { { .clk = { @@ -448,7 +762,200 @@ static struct clksrc_clk clksrcs[] = { .sources = &clkset_group, .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 }, .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 }, - }, + }, { + .clk = { + .name = "sclk_csis", + .id = 0, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "sclk_csis", + .id = 1, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 28), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam", + .id = 0, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam", + .id = 1, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 0, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 1, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 2, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 3, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .id = 0, + .enable = s5pv310_clksrc_mask_lcd0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .id = 1, + .enable = s5pv310_clksrc_mask_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_sata", + .id = -1, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_mout_corebus, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .enable = s5pv310_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .enable = s5pv310_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 2, + .enable = s5pv310_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimg2d", + .id = -1, + }, + .sources = &clkset_mout_g2d, + .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 0, + .parent = &clk_dout_mmc0.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 0), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 1, + .parent = &clk_dout_mmc1.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 4), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 2, + .parent = &clk_dout_mmc2.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 8), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 3, + .parent = &clk_dout_mmc3.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 12), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 4, + .parent = &clk_dout_mmc4.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 }, + } }; /* Clock initialization code */ @@ -464,8 +971,6 @@ static struct clksrc_clk *sysclks[] = { &clk_aclk_cores, &clk_aclk_corem1, &clk_periphclk, - &clk_atclk, - &clk_pclk_dbg, &clk_mout_corebus, &clk_sclk_dmc, &clk_aclk_cored, @@ -478,6 +983,11 @@ static struct clksrc_clk *sysclks[] = { &clk_aclk_100, &clk_aclk_160, &clk_aclk_133, + &clk_dout_mmc0, + &clk_dout_mmc1, + &clk_dout_mmc2, + &clk_dout_mmc3, + &clk_dout_mmc4, }; void __init_or_cpufreq s5pv310_setup_clocks(void) @@ -490,15 +1000,11 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) unsigned long vpllsrc; unsigned long xtal; unsigned long armclk; - unsigned long aclk_corem0; - unsigned long aclk_cores; - unsigned long aclk_corem1; - unsigned long periphclk; unsigned long sclk_dmc; - unsigned long aclk_cored; - unsigned long aclk_corep; - unsigned long aclk_acp; - unsigned long pclk_acp; + unsigned long aclk_200; + unsigned long aclk_100; + unsigned long aclk_160; + unsigned long aclk_133; unsigned int ptr; printk(KERN_DEBUG "%s: registering clocks\n", __func__); @@ -529,26 +1035,21 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) apll, mpll, epll, vpll); armclk = clk_get_rate(&clk_armclk.clk); - aclk_corem0 = clk_get_rate(&clk_aclk_corem0.clk); - aclk_cores = clk_get_rate(&clk_aclk_cores.clk); - aclk_corem1 = clk_get_rate(&clk_aclk_corem1.clk); - periphclk = clk_get_rate(&clk_periphclk.clk); sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk); - aclk_cored = clk_get_rate(&clk_aclk_cored.clk); - aclk_corep = clk_get_rate(&clk_aclk_corep.clk); - aclk_acp = clk_get_rate(&clk_aclk_acp.clk); - pclk_acp = clk_get_rate(&clk_pclk_acp.clk); - - printk(KERN_INFO "S5PV310: ARMCLK=%ld, COREM0=%ld, CORES=%ld\n" - "COREM1=%ld, PERI=%ld, DMC=%ld, CORED=%ld\n" - "COREP=%ld, ACLK_ACP=%ld, PCLK_ACP=%ld", - armclk, aclk_corem0, aclk_cores, aclk_corem1, - periphclk, sclk_dmc, aclk_cored, aclk_corep, - aclk_acp, pclk_acp); + + aclk_200 = clk_get_rate(&clk_aclk_200.clk); + aclk_100 = clk_get_rate(&clk_aclk_100.clk); + aclk_160 = clk_get_rate(&clk_aclk_160.clk); + aclk_133 = clk_get_rate(&clk_aclk_133.clk); + + printk(KERN_INFO "S5PV310: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" + "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", + armclk, sclk_dmc, aclk_200, + aclk_100, aclk_160, aclk_133); clk_f.rate = armclk; clk_h.rate = sclk_dmc; - clk_p.rate = periphclk; + clk_p.rate = aclk_100; for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) s3c_set_clksrc(&clksrcs[ptr], true); diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c index e5b261a99ab2..225ca537c51b 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-s5pv310/cpu.c @@ -31,9 +31,14 @@ extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); /* Initial IO mappings */ static struct map_desc s5pv310_iodesc[] __initdata = { { - .virtual = (unsigned long)S5P_VA_COREPERI_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), - .length = SZ_8K, + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_CMU, + .pfn = __phys_to_pfn(S5PV310_PA_CMU), + .length = SZ_128K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_COMBINER_BASE, @@ -41,19 +46,29 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_COREPERI_BASE, + .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), + .length = SZ_8K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_L2CC, .pfn = __phys_to_pfn(S5PV310_PA_L2CC), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .virtual = (unsigned long)S5P_VA_GPIO, + .pfn = __phys_to_pfn(S5PV310_PA_GPIO1), .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(S5PV310_PA_CMU), - .length = SZ_128K, + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(S5PV310_PA_DMC0), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_UART, + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_512K, .type = MT_DEVICE, }, }; diff --git a/arch/arm/mach-s5pv310/cpufreq.c b/arch/arm/mach-s5pv310/cpufreq.c new file mode 100644 index 000000000000..bcd4ebf93e56 --- /dev/null +++ b/arch/arm/mach-s5pv310/cpufreq.c @@ -0,0 +1,561 @@ +/* linux/arch/arm/mach-s5pv310/cpufreq.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/cpufreq.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/regs-mem.h> + +#include <plat/clock.h> + +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; + +#ifdef CONFIG_REGULATOR +static struct regulator *arm_regulator; +static struct regulator *int_regulator; +#endif + +static struct cpufreq_freqs freqs; +static unsigned int armclk_use_apll; +static unsigned int memtype; + +enum s5pv310_memory_type { + DDR2 = 4, + LPDDR2, + DDR3, +}; + +enum cpufreq_level_index { + L0, L1, L2, L3, L4, CPUFREQ_LEVEL_END, +}; + +static struct cpufreq_frequency_table s5pv310_freq_table[] = { + {L0, 1000*1000}, + {L1, 800*1000}, + {L2, 400*1000}, + {L3, 200*1000}, + {L4, 100*1000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END + 1][7] = { + /* + * Clock divider value for following + * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH, + * DIVATB, DIVPCLK_DBG, DIVAPLL } + */ + + /* ARM L0: 1000MHz */ + { 0, 3, 7, 3, 3, 0, 0 }, + + /* ARM L1: 800MHz */ + { 0, 3, 7, 3, 3, 0, 0 }, + + /* ARM L2: 400MHz */ + { 1, 1, 3, 1, 1, 0, 0 }, + + /* ARM L3: 200MHz */ + { 3, 0, 1, 0, 0, 0, 0 }, + + /* ARM L4A: 100MHz, for DDR2/3 */ + { 7, 0, 1, 0, 0, 0, 0 }, + + /* ARM L4B: 100MHz, for LPDDR2 (SMDKV310 has LPDDR2) */ + { 7, 0, 1, 0, 0, 0, 0 }, +}; + +static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END + 1][8] = { + /* + * Clock divider value for following + * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD + * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } + */ + + /* DMC L0: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L1: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L2: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L3: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L4A: 400MHz, for DDR2/3 */ + { 7, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L4B: 200MHz, for LPDDR2 */ + { 7, 1, 1, 3, 1, 1, 3, 1 }, +}; + +static unsigned int clkdiv_top[CPUFREQ_LEVEL_END + 1][5] = { + /* + * Clock divider value for following + * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } + */ + + /* ACLK200 L0: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L1: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L2: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L3: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L4A: 100MHz */ + { 7, 7, 7, 7, 1 }, + + /* ACLK200 L4B: 100MHz */ + { 7, 7, 7, 7, 1 }, +}; + +static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END + 1][2] = { + /* + * Clock divider value for following + * { DIVGDL/R, DIVGPL/R } + */ + + /* ACLK_GDL/R L0: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L1: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L2: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L3: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L4A: 100MHz */ + { 7, 1 }, + + /* ACLK_GDL/R L4B: 100MHz */ + { 7, 1 }, +}; + +struct cpufreq_voltage_table { + unsigned int index; /* any */ + unsigned int arm_volt; /* uV */ + unsigned int int_volt; +}; + +static struct cpufreq_voltage_table s5pv310_volt_table[] = { + { + .index = L0, + .arm_volt = 1200000, + .int_volt = 1100000, + }, { + .index = L1, + .arm_volt = 1100000, + .int_volt = 1100000, + }, { + .index = L2, + .arm_volt = 1050000, + .int_volt = 1100000, + }, { + .index = L3, + .arm_volt = 1050000, + .int_volt = 1100000, + }, { + .index = L4, + .arm_volt = 1000000, + .int_volt = 1000000, + }, +}; + +int s5pv310_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, s5pv310_freq_table); +} + +unsigned int s5pv310_getspeed(unsigned int cpu) +{ + return clk_get_rate(cpu_clk) / 1000; +} + +void s5pv310_set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = __raw_readl(S5P_CLKDIV_CPU); + + tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK | + S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK | + S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK | + S5P_CLKDIV_CPU0_APLL_MASK); + + tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) | + (clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) | + (clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) | + (clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) | + (clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) | + (clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) | + (clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_CPU); + + do { + tmp = __raw_readl(S5P_CLKDIV_STATCPU); + } while (tmp & 0x1111111); + + /* Change Divider - DMC0 */ + + tmp = __raw_readl(S5P_CLKDIV_DMC0); + + tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK | + S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK | + S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK | + S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK); + + tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) | + (clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) | + (clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) | + (clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) | + (clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) | + (clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) | + (clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) | + (clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_DMC0); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0); + } while (tmp & 0x11111111); + + /* Change Divider - TOP */ + + tmp = __raw_readl(S5P_CLKDIV_TOP); + + tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK | + S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK | + S5P_CLKDIV_TOP_ONENAND_MASK); + + tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) | + (clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) | + (clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) | + (clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) | + (clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_TOP); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_TOP); + } while (tmp & 0x11111); + + /* Change Divider - LEFTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_LEFTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_LEFTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS); + } while (tmp & 0x11); + + /* Change Divider - RIGHTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS); + } while (tmp & 0x11); +} + +static int s5pv310_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int index, div_index, tmp; + unsigned int arm_volt, int_volt; + unsigned int need_apll = 0; + + freqs.old = s5pv310_getspeed(policy->cpu); + + if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + freqs.new = s5pv310_freq_table[index].frequency; + freqs.cpu = policy->cpu; + + if (freqs.new == freqs.old) + return 0; + + /* + * If freqs.new is higher than 800MHz + * cpufreq driver should turn on apll + */ + if (index < L1) + need_apll = 1; + + /* If the memory type is LPDDR2, use L4-B instead of L4-A */ + if ((index == L4) && (memtype == LPDDR2)) + div_index = index + 1; + else + div_index = index; + + /* get the voltage value */ + arm_volt = s5pv310_volt_table[index].arm_volt; + int_volt = s5pv310_volt_table[index].int_volt; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* control regulator */ + if (freqs.new > freqs.old) { + /* Voltage up */ +#ifdef CONFIG_REGULATOR + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); +#endif + } + + /* Clock Configuration Procedure */ + + /* 1. Change the system clock divider values */ + s5pv310_set_clkdiv(div_index); + + /* 2. Change the divider values for special clocks in CMU_TOP */ + /* currently nothing */ + + /* 3. Change the XPLL values or Select the parent XPLL */ + if (need_apll) { + if (!armclk_use_apll) { + /* + * If the parent clock of armclk isn't apll + * here need to set apll (include m,p,s value) + */ + + /* a. MUX_CORE_SEL = MPLL, + * ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = (__raw_readl(S5P_CLKMUX_STATCPU) + >> S5P_CLKSRC_CPU_MUXCORE_SHIFT); + tmp &= 0x7; + } while (tmp != 0x2); + + /* b. Set APLL Lock time */ + __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK); + + /* c. Change PLL PMS values */ + __raw_writel(S5P_APLL_VAL_1000, S5P_APLL_CON0); + + /* d. Turn on a PLL */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp |= (0x1 << S5P_APLLCON0_ENABLE_SHIFT); + __raw_writel(tmp, S5P_APLL_CON0); + + /* e. wait_lock_time */ + do { + tmp = __raw_readl(S5P_APLL_CON0); + } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT))); + + armclk_use_apll = 1; + + } + + /* MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + tmp = __raw_readl(S5P_CLKMUX_STATCPU); + tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); + + } else { + if (clk_get_parent(moutcore) != mout_mpll) { + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = __raw_readl(S5P_CLKMUX_STATCPU); + tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x2 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); + } + } + + /* control regulator */ + if (freqs.new < freqs.old) { + /* Voltage down */ +#ifdef CONFIG_REGULATOR + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); +#endif + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +#ifdef CONFIG_PM +static int s5pv310_cpufreq_suspend(struct cpufreq_policy *policy, + pm_message_t pmsg) +{ + return 0; +} + +static int s5pv310_cpufreq_resume(struct cpufreq_policy *policy) +{ + return 0; +} +#endif + +static int s5pv310_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->cur = policy->min = policy->max = s5pv310_getspeed(policy->cpu); + + cpufreq_frequency_table_get_attr(s5pv310_freq_table, policy->cpu); + + /* set the transition latency value */ + policy->cpuinfo.transition_latency = 100000; + + /* + * S5PV310 multi-core processors has 2 cores + * that the frequency cannot be set independently. + * Each cpu is bound to the same speed. + * So the affected cpu is all of the cpus. + */ + cpumask_setall(policy->cpus); + + return cpufreq_frequency_table_cpuinfo(policy, s5pv310_freq_table); +} + +static struct cpufreq_driver s5pv310_driver = { + .flags = CPUFREQ_STICKY, + .verify = s5pv310_verify_speed, + .target = s5pv310_target, + .get = s5pv310_getspeed, + .init = s5pv310_cpufreq_cpu_init, + .name = "s5pv310_cpufreq", +#ifdef CONFIG_PM + .suspend = s5pv310_cpufreq_suspend, + .resume = s5pv310_cpufreq_resume, +#endif +}; + +static int __init s5pv310_cpufreq_init(void) +{ + unsigned int tmp; + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "moutcore"); + if (IS_ERR(moutcore)) + goto out; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto out; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto out; + +#ifdef CONFIG_REGULATOR + arm_regulator = regulator_get(NULL, "vdd_arm"); + if (IS_ERR(arm_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_arm"); + goto out; + } + + int_regulator = regulator_get(NULL, "vdd_int"); + if (IS_ERR(int_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_int"); + goto out; + } +#endif + + /* check parent clock of armclk */ + tmp = __raw_readl(S5P_CLKSRC_CPU); + if (tmp & S5P_CLKSRC_CPU_MUXCORE_SHIFT) + armclk_use_apll = 0; + else + armclk_use_apll = 1; + + /* + * Check DRAM type. + * Because DVFS level is different according to DRAM type. + */ + memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET); + memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT); + memtype &= S5P_DMC0_MEMTYPE_MASK; + + if ((memtype < DDR2) && (memtype > DDR3)) { + printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype); + goto out; + } else { + printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); + } + + return cpufreq_register_driver(&s5pv310_driver); + +out: + if (!IS_ERR(cpu_clk)) + clk_put(cpu_clk); + + if (!IS_ERR(moutcore)) + clk_put(moutcore); + + if (!IS_ERR(mout_mpll)) + clk_put(mout_mpll); + + if (!IS_ERR(mout_apll)) + clk_put(mout_apll); + +#ifdef CONFIG_REGULATOR + if (!IS_ERR(arm_regulator)) + regulator_put(arm_regulator); + + if (!IS_ERR(int_regulator)) + regulator_put(int_regulator); +#endif + + printk(KERN_ERR "%s: failed initialization\n", __func__); + + return -EINVAL; +} +late_initcall(s5pv310_cpufreq_init); diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c new file mode 100644 index 000000000000..03652c3605f6 --- /dev/null +++ b/arch/arm/mach-s5pv310/hotplug.c @@ -0,0 +1,144 @@ +/* linux arch/arm/mach-s5pv310/hotplug.c + * + * Cloned from linux/arch/arm/mach-realview/hotplug.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/completion.h> + +#include <asm/cacheflush.h> + +extern volatile int pen_release; + +static DECLARE_COMPLETION(cpu_killed); + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + " mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + /* + * here's the WFI + */ + asm(".word 0xe320f003\n" + : + : + : "memory", "cc"); + + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * The trouble is, letting people know about this is not really + * possible, since we are currently running incoherently, and + * therefore cannot safely call printk() or anything else + */ +#ifdef DEBUG + printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu); +#endif + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ +#ifdef DEBUG + unsigned int this_cpu = hard_smp_processor_id(); + + if (cpu != this_cpu) { + printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n", + this_cpu, cpu); + BUG(); + } +#endif + + printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + complete(&cpu_killed); + + /* + * we're ready for shutdown now, so do it + */ + cpu_enter_lowpower(); + platform_do_lowpower(cpu); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); +} + +int platform_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h index 4cdedda6e652..e81332f0330f 100644 --- a/arch/arm/mach-s5pv310/include/mach/irqs.h +++ b/arch/arm/mach-s5pv310/include/mach/irqs.h @@ -60,6 +60,9 @@ #define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3) #define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4) +#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) +#define IRQ_RTC_TIC COMBINER_IRQ(23, 1) + #define IRQ_UART0 COMBINER_IRQ(26, 0) #define IRQ_UART1 COMBINER_IRQ(26, 1) #define IRQ_UART2 COMBINER_IRQ(26, 2) @@ -68,6 +71,13 @@ #define IRQ_IIC COMBINER_IRQ(27, 0) +#define IRQ_HSMMC0 COMBINER_IRQ(29, 0) +#define IRQ_HSMMC1 COMBINER_IRQ(29, 1) +#define IRQ_HSMMC2 COMBINER_IRQ(29, 2) +#define IRQ_HSMMC3 COMBINER_IRQ(29, 3) + +#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) + /* Set the default NR_IRQS */ #define NR_IRQS COMBINER_IRQ(MAX_COMBINER_NR, 0) diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 213e1101a3b3..eab0ff77e154 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -25,15 +25,24 @@ #define S5PV310_PA_SYSRAM (0x02025000) +#define S5PC210_PA_ONENAND (0x0C000000) +#define S5P_PA_ONENAND S5PC210_PA_ONENAND + +#define S5PC210_PA_ONENAND_DMA (0x0C600000) +#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA + #define S5PV310_PA_CHIPID (0x10000000) #define S5P_PA_CHIPID S5PV310_PA_CHIPID -#define S5PV310_PA_SYSCON (0x10020000) +#define S5PV310_PA_SYSCON (0x10010000) #define S5P_PA_SYSCON S5PV310_PA_SYSCON #define S5PV310_PA_CMU (0x10030000) #define S5PV310_PA_WATCHDOG (0x10060000) +#define S5PV310_PA_RTC (0x10070000) + +#define S5PV310_PA_DMC0 (0x10400000) #define S5PV310_PA_COMBINER (0x10448000) @@ -46,7 +55,6 @@ #define S5PV310_PA_GPIO1 (0x11400000) #define S5PV310_PA_GPIO2 (0x11000000) #define S5PV310_PA_GPIO3 (0x03860000) -#define S5P_PA_GPIO S5PV310_PA_GPIO1 #define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) @@ -76,6 +84,7 @@ #define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2) #define S3C_PA_HSMMC3 S5PV310_PA_HSMMC(3) #define S3C_PA_IIC S5PV310_PA_IIC0 +#define S3C_PA_RTC S5PV310_PA_RTC #define S3C_PA_WDT S5PV310_PA_WATCHDOG #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h index 4013553cd9be..5d0bb40036e0 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h @@ -19,6 +19,12 @@ #define S5P_INFORM0 S5P_CLKREG(0x800) +#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500) +#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600) + +#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500) +#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) + #define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) #define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) #define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) @@ -26,11 +32,23 @@ #define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) #define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) - +#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) +#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) +#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) +#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) #define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) +#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) #define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) - +#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) +#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) +#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) +#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) +#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) +#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548) +#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C) #define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550) #define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554) #define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558) @@ -38,12 +56,27 @@ #define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) #define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) +#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) +#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) +#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) #define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) +#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) + +#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) +#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) +#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) +#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) +#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) +#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) -#define S5P_CLKSRC_CORE S5P_CLKREG(0x10200) -#define S5P_CLKDIV_CORE0 S5P_CLKREG(0x10500) +#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200) +#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500) +#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600) #define S5P_APLL_LOCK S5P_CLKREG(0x14000) #define S5P_MPLL_LOCK S5P_CLKREG(0x14004) @@ -60,4 +93,68 @@ #define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) +/* APLL_LOCK */ +#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */ + +/* APLL_CON0 */ +#define S5P_APLLCON0_ENABLE_SHIFT (31) +#define S5P_APLLCON0_LOCKED_SHIFT (29) +#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) + +/* CLK_SRC_CPU */ +#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) +#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) + +/* CLKDIV_CPU0 */ +#define S5P_CLKDIV_CPU0_CORE_SHIFT (0) +#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT) +#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4) +#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT) +#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8) +#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT) +#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12) +#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT) +#define S5P_CLKDIV_CPU0_ATB_SHIFT (16) +#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT) +#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20) +#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) +#define S5P_CLKDIV_CPU0_APLL_SHIFT (24) +#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT) + +/* CLKDIV_DMC0 */ +#define S5P_CLKDIV_DMC0_ACP_SHIFT (0) +#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT) +#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4) +#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) +#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8) +#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT) +#define S5P_CLKDIV_DMC0_DMC_SHIFT (12) +#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT) +#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16) +#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT) +#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20) +#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT) +#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24) +#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT) +#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28) +#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT) + +/* CLKDIV_TOP */ +#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0) +#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT) +#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4) +#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT) +#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8) +#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT) +#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12) +#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT) +#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16) +#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT) + +/* CLKDIV_LEFTBUS / CLKDIV_RIGHTBUS*/ +#define S5P_CLKDIV_BUS_GDLR_SHIFT (0) +#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT) +#define S5P_CLKDIV_BUS_GPLR_SHIFT (4) +#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) + #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-mem.h b/arch/arm/mach-s5pv310/include/mach/regs-mem.h new file mode 100644 index 000000000000..834227140eaa --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-mem.h @@ -0,0 +1,23 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-mem.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - SROMC and DMC register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_MEM_H +#define __ASM_ARCH_REGS_MEM_H __FILE__ + +#include <mach/map.h> + +#define S5P_DMC0_MEMCON_OFFSET 0x04 + +#define S5P_DMC0_MEMTYPE_SHIFT 8 +#define S5P_DMC0_MEMTYPE_MASK 0xF + +#endif /* __ASM_ARCH_REGS_MEM_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h index 990f3ba88a1f..b7ec252384f4 100644 --- a/arch/arm/mach-s5pv310/include/mach/smp.h +++ b/arch/arm/mach-s5pv310/include/mach/smp.h @@ -7,17 +7,10 @@ #define ASM_ARCH_SMP_H __FILE__ #include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> extern void __iomem *gic_cpu_base_addr; -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x03; \ - }) - /* * We use IRQ1 as the IPI */ diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-s5pv310/irq-combiner.c index 0f7052164f23..c3f88c3faf6c 100644 --- a/arch/arm/mach-s5pv310/irq-combiner.c +++ b/arch/arm/mach-s5pv310/irq-combiner.c @@ -66,11 +66,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) if (status == 0) goto out; - for (combiner_irq = 0; combiner_irq < 32; combiner_irq++) { - if (status & 0x1) - break; - status >>= 1; - } + combiner_irq = __ffs(status); cascade_irq = combiner_irq + (chip_data->irq_offset & ~31); if (unlikely(cascade_irq >= NR_IRQS)) diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-s5pv310/mach-smdkc210.c new file mode 100644 index 000000000000..1384d8bb3903 --- /dev/null +++ b/arch/arm/mach-s5pv310/mach-smdkc210.c @@ -0,0 +1,99 @@ +/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <asm/hardware/cache-l2x0.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv310.h> +#include <plat/cpu.h> +#include <plat/devs.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, +}; + +static struct platform_device *smdkc210_devices[] __initdata = { + &s3c_device_rtc, + &s3c_device_wdt, +}; + +static void __init smdkc210_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs)); +} + +static void __init smdkc210_machine_init(void) +{ +#ifdef CONFIG_CACHE_L2X0 + l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff); +#endif + + platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices)); +} + +MACHINE_START(SMDKC210, "SMDKC210") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv310_init_irq, + .map_io = smdkc210_map_io, + .init_machine = smdkc210_machine_init, + .timer = &s5pv310_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c index 0d6ab77709d2..9cb827da97f5 100644 --- a/arch/arm/mach-s5pv310/mach-smdkv310.c +++ b/arch/arm/mach-s5pv310/mach-smdkv310.c @@ -17,6 +17,7 @@ #include <plat/regs-serial.h> #include <plat/s5pv310.h> #include <plat/cpu.h> +#include <plat/devs.h> #include <mach/map.h> @@ -65,6 +66,11 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { }, }; +static struct platform_device *smdkv310_devices[] __initdata = { + &s3c_device_rtc, + &s3c_device_wdt, +}; + static void __init smdkv310_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -77,6 +83,8 @@ static void __init smdkv310_machine_init(void) #ifdef CONFIG_CACHE_L2X0 l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff); #endif + + platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); } MACHINE_START(SMDKV310, "SMDKV310") diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c index 2388cb947936..b57efaeb295f 100644 --- a/arch/arm/mach-s5pv310/mach-universal_c210.c +++ b/arch/arm/mach-s5pv310/mach-universal_c210.c @@ -7,7 +7,11 @@ * published by the Free Software Foundation. */ +#include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -60,6 +64,61 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { }, }; +static struct gpio_keys_button universal_gpio_keys_tables[] = { + { + .code = KEY_VOLUMEUP, + .gpio = S5PV310_GPX2(0), /* XEINT16 */ + .desc = "gpio-keys: KEY_VOLUMEUP", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_VOLUMEDOWN, + .gpio = S5PV310_GPX2(1), /* XEINT17 */ + .desc = "gpio-keys: KEY_VOLUMEDOWN", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CONFIG, + .gpio = S5PV310_GPX2(2), /* XEINT18 */ + .desc = "gpio-keys: KEY_CONFIG", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CAMERA, + .gpio = S5PV310_GPX2(3), /* XEINT19 */ + .desc = "gpio-keys: KEY_CAMERA", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_OK, + .gpio = S5PV310_GPX3(5), /* XEINT29 */ + .desc = "gpio-keys: KEY_OK", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data universal_gpio_keys_data = { + .buttons = universal_gpio_keys_tables, + .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), +}; + +static struct platform_device universal_gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &universal_gpio_keys_data, + }, +}; + +static struct platform_device *universal_devices[] __initdata = { + &universal_gpio_keys, +}; + static void __init universal_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -72,6 +131,9 @@ static void __init universal_machine_init(void) #ifdef CONFIG_CACHE_L2X0 l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff); #endif + + /* Last */ + platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); } MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h index f6c6837c5451..8e845b6a7cb5 100644 --- a/arch/arm/mach-shark/include/mach/vmalloc.h +++ b/arch/arm/mach-shark/include/mach/vmalloc.h @@ -1,4 +1,4 @@ /* * arch/arm/mach-shark/include/mach/vmalloc.h */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) +#define VMALLOC_END 0xd0000000 diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig new file mode 100644 index 000000000000..ad86415d1577 --- /dev/null +++ b/arch/arm/mach-tcc8k/Kconfig @@ -0,0 +1,11 @@ +if ARCH_TCC8K + +comment "TCC8000 systems:" + +config MACH_TCC8000_SDK + bool "Telechips TCC8000-SDK development kit" + default y + help + Support for the Telechips TCC8000-SDK board. + +endif diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile new file mode 100644 index 000000000000..9bacf31e49ba --- /dev/null +++ b/arch/arm/mach-tcc8k/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for TCC8K boards and common files. +# + +# Common support +obj-y += clock.o irq.o time.o io.o devices.o + +# Board specific support +obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot new file mode 100644 index 000000000000..f135c9deae10 --- /dev/null +++ b/arch/arm/mach-tcc8k/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x20008000 +params_phys-y := 0x20000100 +initrd_phys-y := 0x20800000 diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c new file mode 100644 index 000000000000..4e42555b2009 --- /dev/null +++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include <mach/clock.h> + +#include "common.h" + +#define XI_FREQUENCY 12000000 +#define XTI_FREQUENCY 32768 + +#ifdef CONFIG_MTD_NAND_TCC +/* NAND */ +static struct tcc_nand_platform_data tcc8k_sdk_nand_data = { + .width = 1, + .hw_ecc = 0, +}; +#endif + +static void __init tcc8k_init(void) +{ +#ifdef CONFIG_MTD_NAND_TCC + tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data; + platform_device_register(&tcc_nand_device); +#endif +} + +static void __init tcc8k_init_timer(void) +{ + tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY); +} + +static struct sys_timer tcc8k_timer = { + .init = tcc8k_init_timer, +}; + +static void __init tcc8k_map_io(void) +{ + tcc8k_map_common_io(); +} + +MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board") + .phys_io = 0x90000000, + .io_pg_offst = ((0xf1000000) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = tcc8k_map_io, + .init_irq = tcc8k_init_irq, + .init_machine = tcc8k_init, + .timer = &tcc8k_timer, +MACHINE_END diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c new file mode 100644 index 000000000000..ba32a15127ab --- /dev/null +++ b/arch/arm/mach-tcc8k/clock.c @@ -0,0 +1,567 @@ +/* + * Lowlevel clock handling for Telechips TCC8xxx SoCs + * + * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2 + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/spinlock.h> + +#include <asm/clkdev.h> + +#include <mach/clock.h> +#include <mach/irqs.h> +#include <mach/tcc8k-regs.h> + +#include "common.h" + +#define BCLKCTR0 (CKC_BASE + BCLKCTR0_OFFS) +#define BCLKCTR1 (CKC_BASE + BCLKCTR1_OFFS) + +#define ACLKREF (CKC_BASE + ACLKREF_OFFS) +#define ACLKUART0 (CKC_BASE + ACLKUART0_OFFS) +#define ACLKUART1 (CKC_BASE + ACLKUART1_OFFS) +#define ACLKUART2 (CKC_BASE + ACLKUART2_OFFS) +#define ACLKUART3 (CKC_BASE + ACLKUART3_OFFS) +#define ACLKUART4 (CKC_BASE + ACLKUART4_OFFS) +#define ACLKI2C (CKC_BASE + ACLKI2C_OFFS) +#define ACLKADC (CKC_BASE + ACLKADC_OFFS) +#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS) +#define ACLKLCD (CKC_BASE + ACLKLCD_OFFS) +#define ACLKSDH0 (CKC_BASE + ACLKSDH0_OFFS) +#define ACLKSDH1 (CKC_BASE + ACLKSDH1_OFFS) +#define ACLKSPI0 (CKC_BASE + ACLKSPI0_OFFS) +#define ACLKSPI1 (CKC_BASE + ACLKSPI1_OFFS) +#define ACLKSPDIF (CKC_BASE + ACLKSPDIF_OFFS) +#define ACLKC3DEC (CKC_BASE + ACLKC3DEC_OFFS) +#define ACLKCAN0 (CKC_BASE + ACLKCAN0_OFFS) +#define ACLKCAN1 (CKC_BASE + ACLKCAN1_OFFS) +#define ACLKGSB0 (CKC_BASE + ACLKGSB0_OFFS) +#define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS) +#define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS) +#define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS) +#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS) +#define ACLKTCT (CKC_BASE + ACLKTCT_OFFS) +#define ACLKTCX (CKC_BASE + ACLKTCX_OFFS) +#define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS) + +/* Crystal frequencies */ +static unsigned long xi_rate, xti_rate; + +static void __iomem *pll_cfg_addr(int pll) +{ + switch (pll) { + case 0: return (CKC_BASE + PLL0CFG_OFFS); + case 1: return (CKC_BASE + PLL1CFG_OFFS); + case 2: return (CKC_BASE + PLL2CFG_OFFS); + default: + BUG(); + } +} + +static int pll_enable(int pll, int enable) +{ + u32 reg; + void __iomem *addr = pll_cfg_addr(pll); + + reg = __raw_readl(addr); + if (enable) + reg &= ~PLLxCFG_PD; + else + reg |= PLLxCFG_PD; + + __raw_writel(reg, addr); + return 0; +} + +static int xi_enable(int enable) +{ + u32 reg; + + reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS); + if (enable) + reg |= CLKCTRL_XE; + else + reg &= ~CLKCTRL_XE; + + __raw_writel(reg, CKC_BASE + CLKCTRL_OFFS); + return 0; +} + +static int root_clk_enable(enum root_clks src) +{ + switch (src) { + case CLK_SRC_PLL0: return pll_enable(0, 1); + case CLK_SRC_PLL1: return pll_enable(1, 1); + case CLK_SRC_PLL2: return pll_enable(2, 1); + case CLK_SRC_XI: return xi_enable(1); + default: + BUG(); + } + return 0; +} + +static int root_clk_disable(enum root_clks root_src) +{ + switch (root_src) { + case CLK_SRC_PLL0: return pll_enable(0, 0); + case CLK_SRC_PLL1: return pll_enable(1, 0); + case CLK_SRC_PLL2: return pll_enable(2, 0); + case CLK_SRC_XI: return xi_enable(0); + default: + BUG(); + } + return 0; +} + +static int enable_clk(struct clk *clk) +{ + u32 reg; + + if (clk->root_id != CLK_SRC_NOROOT) + return root_clk_enable(clk->root_id); + + if (clk->aclkreg) { + reg = __raw_readl(clk->aclkreg); + reg |= ACLK_EN; + __raw_writel(reg, clk->aclkreg); + } + if (clk->bclkctr) { + reg = __raw_readl(clk->bclkctr); + reg |= 1 << clk->bclk_shift; + __raw_writel(reg, clk->bclkctr); + } + return 0; +} + +static void disable_clk(struct clk *clk) +{ + u32 reg; + + if (clk->root_id != CLK_SRC_NOROOT) { + root_clk_disable(clk->root_id); + return; + } + + if (clk->bclkctr) { + reg = __raw_readl(clk->bclkctr); + reg &= ~(1 << clk->bclk_shift); + __raw_writel(reg, clk->bclkctr); + } + if (clk->aclkreg) { + reg = __raw_readl(clk->aclkreg); + reg &= ~ACLK_EN; + __raw_writel(reg, clk->aclkreg); + } +} + +static unsigned long get_rate_pll(int pll) +{ + u32 reg; + unsigned long s, m, p; + void __iomem *addr = pll_cfg_addr(pll); + + reg = __raw_readl(addr); + s = (reg >> 16) & 0x07; + m = (reg >> 8) & 0xff; + p = reg & 0x3f; + + return (m * xi_rate) / (p * (1 << s)); +} + +static unsigned long get_rate_pll_div(int pll) +{ + u32 reg; + unsigned long div = 0; + void __iomem *addr; + + switch (pll) { + case 0: + addr = CKC_BASE + CLKDIVC0_OFFS; + reg = __raw_readl(addr); + if (reg & CLKDIVC0_P0E) + div = (reg >> 24) & 0x3f; + break; + case 1: + addr = CKC_BASE + CLKDIVC0_OFFS; + reg = __raw_readl(addr); + if (reg & CLKDIVC0_P1E) + div = (reg >> 16) & 0x3f; + break; + case 2: + addr = CKC_BASE + CLKDIVC1_OFFS; + reg = __raw_readl(addr); + if (reg & CLKDIVC1_P2E) + div = __raw_readl(addr) & 0x3f; + break; + } + return get_rate_pll(pll) / (div + 1); +} + +static unsigned long get_rate_xi_div(void) +{ + unsigned long div = 0; + u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS); + + if (reg & CLKDIVC0_XE) + div = (reg >> 8) & 0x3f; + + return xi_rate / (div + 1); +} + +static unsigned long get_rate_xti_div(void) +{ + unsigned long div = 0; + u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS); + + if (reg & CLKDIVC0_XTE) + div = reg & 0x3f; + + return xti_rate / (div + 1); +} + +static unsigned long root_clk_get_rate(enum root_clks src) +{ + switch (src) { + case CLK_SRC_PLL0: return get_rate_pll(0); + case CLK_SRC_PLL1: return get_rate_pll(1); + case CLK_SRC_PLL2: return get_rate_pll(2); + case CLK_SRC_PLL0DIV: return get_rate_pll_div(0); + case CLK_SRC_PLL1DIV: return get_rate_pll_div(1); + case CLK_SRC_PLL2DIV: return get_rate_pll_div(2); + case CLK_SRC_XI: return xi_rate; + case CLK_SRC_XTI: return xti_rate; + case CLK_SRC_XIDIV: return get_rate_xi_div(); + case CLK_SRC_XTIDIV: return get_rate_xti_div(); + default: return 0; + } +} + +static unsigned long aclk_get_rate(struct clk *clk) +{ + u32 reg; + unsigned long div; + unsigned int src; + + reg = __raw_readl(clk->aclkreg); + div = reg & 0x0fff; + src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK; + return root_clk_get_rate(src) / (div + 1); +} + +static unsigned long aclk_best_div(struct clk *clk, unsigned long rate) +{ + unsigned long div, src, freq, r1, r2; + + src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; + src &= CLK_SRC_MASK; + freq = root_clk_get_rate(src); + div = freq / rate + 1; + r1 = freq / div; + r2 = freq / (div + 1); + if (r2 >= rate) + return div + 1; + if ((rate - r2) < (r1 - rate)) + return div + 1; + + return div; +} + +static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned int src; + + src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; + src &= CLK_SRC_MASK; + + return root_clk_get_rate(src) / aclk_best_div(clk, rate); +} + +static int aclk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + + reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK; + reg |= aclk_best_div(clk, rate); + return 0; +} + +static unsigned long get_rate_sys(struct clk *clk) +{ + unsigned int src; + + src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK; + return root_clk_get_rate(src); +} + +static unsigned long get_rate_bus(struct clk *clk) +{ + unsigned int div; + + div = (__raw_readl(CKC_BASE + CLKCTRL_OFFS) >> 4) & 0xff; + return get_rate_sys(clk) / (div + 1); +} + +static unsigned long get_rate_cpu(struct clk *clk) +{ + unsigned int reg, div, fsys, fbus; + + fbus = get_rate_bus(clk); + reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS); + if (reg & (1 << 29)) + return fbus; + fsys = get_rate_sys(clk); + div = (reg >> 16) & 0x0f; + return fbus + ((fsys - fbus) * (div + 1)) / 16; +} + +static unsigned long get_rate_root(struct clk *clk) +{ + return root_clk_get_rate(clk->root_id); +} + +static int aclk_set_parent(struct clk *clock, struct clk *parent) +{ + u32 reg; + + if (clock->parent == parent) + return 0; + + clock->parent = parent; + + if (!parent) + return 0; + + if (parent->root_id == CLK_SRC_NOROOT) + return 0; + reg = __raw_readl(clock->aclkreg); + reg &= ~ACLK_SEL_MASK; + reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK; + __raw_writel(reg, clock->aclkreg); + + return 0; +} + +#define DEFINE_ROOT_CLOCK(name, ri, p) \ + static struct clk name = { \ + .root_id = ri, \ + .get_rate = get_rate_root, \ + .enable = enable_clk, \ + .disable = disable_clk, \ + .parent = p, \ + }; + +#define DEFINE_SPECIAL_CLOCK(name, gr, p) \ + static struct clk name = { \ + .root_id = CLK_SRC_NOROOT, \ + .get_rate = gr, \ + .parent = p, \ + }; + +#define DEFINE_ACLOCK(name, bc, bs, ar) \ + static struct clk name = { \ + .root_id = CLK_SRC_NOROOT, \ + .bclkctr = bc, \ + .bclk_shift = bs, \ + .aclkreg = ar, \ + .get_rate = aclk_get_rate, \ + .set_rate = aclk_set_rate, \ + .round_rate = aclk_round_rate, \ + .enable = enable_clk, \ + .disable = disable_clk, \ + .set_parent = aclk_set_parent, \ + }; + +#define DEFINE_BCLOCK(name, bc, bs, gr, p) \ + static struct clk name = { \ + .root_id = CLK_SRC_NOROOT, \ + .bclkctr = bc, \ + .bclk_shift = bs, \ + .get_rate = gr, \ + .enable = enable_clk, \ + .disable = disable_clk, \ + .parent = p, \ + }; + +DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL) +DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL) +DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi) +DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti) +DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi) +DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi) +DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi) +DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0) +DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1) +DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2) + +/* The following 3 clocks are special and are initialized explicitly later */ +DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL) +DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys) +DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys) + +DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT) +DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX) +DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ) +DEFINE_ACLOCK(ref, NULL, 0, ACLKREF) +DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0) +DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1) +DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2) +DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3) +DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4) +DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C) +DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC) +DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH) +DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD) +DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0) +DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1) +DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0) +DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1) +DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF) +DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC) +DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0) +DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1) +DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0) +DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1) +DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2) +DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3) +DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH) + +DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL) +DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL) +DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL) +DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL) +DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL) +DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL) +DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL) +DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL) +DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL) +DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL) +DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL) +DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL) +DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL) +DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL) +DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL) +DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL) +DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL) +DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL) +DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL) +DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL) +DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL) +DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL) + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, + +static struct clk_lookup lookups[] = { + _REGISTER_CLOCK(NULL, "bus", bus) + _REGISTER_CLOCK(NULL, "cpu", cpu) + _REGISTER_CLOCK(NULL, "tct", tct) + _REGISTER_CLOCK(NULL, "tcx", tcx) + _REGISTER_CLOCK(NULL, "tcz", tcz) + _REGISTER_CLOCK(NULL, "ref", ref) + _REGISTER_CLOCK(NULL, "dai0", dai0) + _REGISTER_CLOCK(NULL, "pic", pic) + _REGISTER_CLOCK(NULL, "tc", tc) + _REGISTER_CLOCK(NULL, "gpio", gpio) + _REGISTER_CLOCK(NULL, "usbd", usbd) + _REGISTER_CLOCK("tcc-uart.0", NULL, uart0) + _REGISTER_CLOCK("tcc-uart.2", NULL, uart2) + _REGISTER_CLOCK("tcc-i2c", NULL, i2c) + _REGISTER_CLOCK("tcc-uart.3", NULL, uart3) + _REGISTER_CLOCK(NULL, "ecc", ecc) + _REGISTER_CLOCK(NULL, "adc", adc) + _REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0) + _REGISTER_CLOCK(NULL, "gdma0", gdma0) + _REGISTER_CLOCK(NULL, "lcd", lcd) + _REGISTER_CLOCK(NULL, "rtc", rtc) + _REGISTER_CLOCK(NULL, "nfc", nfc) + _REGISTER_CLOCK("tcc-mmc.0", NULL, sd0) + _REGISTER_CLOCK(NULL, "g2d", g2d) + _REGISTER_CLOCK(NULL, "gdma1", gdma1) + _REGISTER_CLOCK("tcc-uart.1", NULL, uart1) + _REGISTER_CLOCK("tcc-spi.0", NULL, spi0) + _REGISTER_CLOCK(NULL, "mscl", mscl) + _REGISTER_CLOCK("tcc-spi.1", NULL, spi1) + _REGISTER_CLOCK(NULL, "bdma", bdma) + _REGISTER_CLOCK(NULL, "adma0", adma0) + _REGISTER_CLOCK(NULL, "spdif", spdif) + _REGISTER_CLOCK(NULL, "scfg", scfg) + _REGISTER_CLOCK(NULL, "cid", cid) + _REGISTER_CLOCK("tcc-mmc.1", NULL, sd1) + _REGISTER_CLOCK("tcc-uart.4", NULL, uart4) + _REGISTER_CLOCK(NULL, "dai1", dai1) + _REGISTER_CLOCK(NULL, "adma1", adma1) + _REGISTER_CLOCK(NULL, "c3dec", c3dec) + _REGISTER_CLOCK("tcc-can.0", NULL, can0) + _REGISTER_CLOCK("tcc-can.1", NULL, can1) + _REGISTER_CLOCK(NULL, "gps", gps) + _REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0) + _REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1) + _REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2) + _REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3) + _REGISTER_CLOCK(NULL, "gdma2", gdma2) + _REGISTER_CLOCK(NULL, "gdma3", gdma3) + _REGISTER_CLOCK(NULL, "ddrc", ddrc) + _REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1) +}; + +static struct clk *root_clk_by_index(enum root_clks src) +{ + switch (src) { + case CLK_SRC_PLL0: return &pll0; + case CLK_SRC_PLL1: return &pll1; + case CLK_SRC_PLL2: return &pll2; + case CLK_SRC_PLL0DIV: return &pll0div; + case CLK_SRC_PLL1DIV: return &pll1div; + case CLK_SRC_PLL2DIV: return &pll2div; + case CLK_SRC_XI: return ξ + case CLK_SRC_XTI: return &xti; + case CLK_SRC_XIDIV: return &xidiv; + case CLK_SRC_XTIDIV: return &xtidiv; + default: return NULL; + } +} + +static void find_aclk_parent(struct clk *clk) +{ + unsigned int src; + struct clk *clock; + + if (!clk->aclkreg) + return; + + src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT; + src &= CLK_SRC_MASK; + + clock = root_clk_by_index(src); + if (!clock) + return; + + clk->parent = clock; + clk->set_parent = aclk_set_parent; +} + +void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq) +{ + int i; + + xi_rate = xi_freq; + xti_rate = xti_freq; + + /* fixup parents and add the clock */ + for (i = 0; i < ARRAY_SIZE(lookups); i++) { + find_aclk_parent(lookups[i].clk); + clkdev_add(&lookups[i]); + } + tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32); +} diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h new file mode 100644 index 000000000000..705690add395 --- /dev/null +++ b/arch/arm/mach-tcc8k/common.h @@ -0,0 +1,15 @@ +#ifndef MACH_TCC8K_COMMON_H +#define MACH_TCC8K_COMMON_H + +#include <linux/platform_device.h> + +extern struct platform_device tcc_nand_device; + +struct clk; + +extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq); +extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq); +extern void tcc8k_init_irq(void); +extern void tcc8k_map_common_io(void); + +#endif diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c new file mode 100644 index 000000000000..6722ad7c2836 --- /dev/null +++ b/arch/arm/mach-tcc8k/devices.c @@ -0,0 +1,239 @@ +/* + * linux/arch/arm/mach-tcc8k/devices.c + * + * Copyright (C) Telechips, Inc. + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of GPL v2. + * + */ + +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <asm/mach/map.h> + +#include <mach/tcc8k-regs.h> +#include <mach/irqs.h> + +#include "common.h" + +static u64 tcc8k_dmamask = DMA_BIT_MASK(32); + +#ifdef CONFIG_MTD_NAND_TCC +/* NAND controller */ +static struct resource tcc_nand_resources[] = { + { + .start = (resource_size_t)NFC_BASE, + .end = (resource_size_t)NFC_BASE + 0x7f, + .flags = IORESOURCE_MEM, + }, { + .start = INT_NFC, + .end = INT_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device tcc_nand_device = { + .name = "tcc_nand", + .id = 0, + .num_resources = ARRAY_SIZE(tcc_nand_resources), + .resource = tcc_nand_resources, +}; +#endif + +#ifdef CONFIG_MMC_TCC8K +/* MMC controller */ +static struct resource tcc8k_mmc0_resource[] = { + { + .start = INT_SD0, + .end = INT_SD0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource tcc8k_mmc1_resource[] = { + { + .start = INT_SD1, + .end = INT_SD1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device tcc8k_mmc0_device = { + .name = "tcc-mmc", + .id = 0, + .num_resources = ARRAY_SIZE(tcc8k_mmc0_resource), + .resource = tcc8k_mmc0_resource, + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +struct platform_device tcc8k_mmc1_device = { + .name = "tcc-mmc", + .id = 1, + .num_resources = ARRAY_SIZE(tcc8k_mmc1_resource), + .resource = tcc8k_mmc1_resource, + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +static inline void tcc8k_init_mmc(void) +{ + u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS); + + reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS; + __raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS); + + platform_device_register(&tcc8k_mmc0_device); + platform_device_register(&tcc8k_mmc1_device); +} +#else +static inline void tcc8k_init_mmc(void) { } +#endif + +#ifdef CONFIG_USB_OHCI_HCD +static int tcc8k_ohci_init(struct device *dev) +{ + u32 reg; + + /* Use GPIO PK19 as VBUS control output */ + reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS); + reg &= ~(1 << 19); + __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS); + reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS); + reg &= ~(1 << 19); + __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS); + + reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS); + reg |= (1 << 19); + __raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS); + /* Turn on VBUS */ + reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS); + reg |= (1 << 19); + __raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS); + + return 0; +} + +static struct resource tcc8k_ohci0_resources[] = { + [0] = { + .start = (resource_size_t)USBH0_BASE, + .end = (resource_size_t)USBH0_BASE + 0x5c, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_USBH0, + .end = INT_USBH0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource tcc8k_ohci1_resources[] = { + [0] = { + .start = (resource_size_t)USBH1_BASE, + .end = (resource_size_t)USBH1_BASE + 0x5c, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = INT_USBH1, + .end = INT_USBH1, + .flags = IORESOURCE_IRQ, + } +}; + +static struct tccohci_platform_data tcc8k_ohci0_platform_data = { + .controller = 0, + .port_mode = PMM_PERPORT_MODE, + .init = tcc8k_ohci_init, +}; + +static struct tccohci_platform_data tcc8k_ohci1_platform_data = { + .controller = 1, + .port_mode = PMM_PERPORT_MODE, + .init = tcc8k_ohci_init, +}; + +static struct platform_device ohci0_device = { + .name = "tcc-ohci", + .id = 0, + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tcc8k_ohci0_platform_data, + }, + .num_resources = ARRAY_SIZE(tcc8k_ohci0_resources), + .resource = tcc8k_ohci0_resources, +}; + +static struct platform_device ohci1_device = { + .name = "tcc-ohci", + .id = 1, + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tcc8k_ohci1_platform_data, + }, + .num_resources = ARRAY_SIZE(tcc8k_ohci1_resources), + .resource = tcc8k_ohci1_resources, +}; + +static void __init tcc8k_init_usbhost(void) +{ + platform_device_register(&ohci0_device); + platform_device_register(&ohci1_device); +} +#else +static void __init tcc8k_init_usbhost(void) { } +#endif + +/* USB device controller*/ +#ifdef CONFIG_USB_GADGET_TCC8K +static struct resource udc_resources[] = { + [0] = { + .start = INT_USBD, + .end = INT_USBD, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = INT_UDMA, + .end = INT_UDMA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tcc8k_udc_device = { + .name = "tcc-udc", + .id = 0, + .resource = udc_resources, + .num_resources = ARRAY_SIZE(udc_resources), + .dev = { + .dma_mask = &tcc8k_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static void __init tcc8k_init_usb_gadget(void) +{ + platform_device_register(&tcc8k_udc_device); +} +#else +static void __init tcc8k_init_usb_gadget(void) { } +#endif /* CONFIG_USB_GADGET_TCC83X */ + +static int __init tcc8k_init_devices(void) +{ + tcc8k_init_mmc(); + tcc8k_init_usbhost(); + tcc8k_init_usb_gadget(); + return 0; +} + +arch_initcall(tcc8k_init_devices); diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c new file mode 100644 index 000000000000..9b39d7fa658f --- /dev/null +++ b/arch/arm/mach-tcc8k/io.c @@ -0,0 +1,62 @@ +/* + * linux/arch/arm/mach-tcc8k/io.c + * + * (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * derived from TCC83xx io.c + * Copyright (C) Telechips, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> + +#include <asm/mach/map.h> + +#include <mach/tcc8k-regs.h> + +/* + * The machine specific code may provide the extra mapping besides the + * default mapping provided here. + */ +static struct map_desc tcc8k_io_desc[] __initdata = { + { + .virtual = (unsigned long)CS1_BASE_VIRT, + .pfn = __phys_to_pfn(CS1_BASE), + .length = CS1_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)AHB_PERI_BASE_VIRT, + .pfn = __phys_to_pfn(AHB_PERI_BASE), + .length = AHB_PERI_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)APB0_PERI_BASE_VIRT, + .pfn = __phys_to_pfn(APB0_PERI_BASE), + .length = APB0_PERI_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)APB1_PERI_BASE_VIRT, + .pfn = __phys_to_pfn(APB1_PERI_BASE), + .length = APB1_PERI_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)EXT_MEM_CTRL_BASE_VIRT, + .pfn = __phys_to_pfn(EXT_MEM_CTRL_BASE), + .length = EXT_MEM_CTRL_SIZE, + .type = MT_DEVICE, + }, +}; + +/* + * Maps common IO regions for tcc8k. + * + */ +void __init tcc8k_map_common_io(void) +{ + iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc)); +} diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c new file mode 100644 index 000000000000..34575c4963f0 --- /dev/null +++ b/arch/arm/mach-tcc8k/irq.c @@ -0,0 +1,111 @@ +/* + * Copyright (C) Telechips, Inc. + * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GNU GPL version 2. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <asm/mach/irq.h> + +#include <mach/tcc8k-regs.h> +#include <mach/irqs.h> + +#include "common.h" + +/* Disable IRQ */ +static void tcc8000_mask_ack_irq0(unsigned int irq) +{ + PIC0_IEN &= ~(1 << irq); + PIC0_CREQ |= (1 << irq); +} + +static void tcc8000_mask_ack_irq1(unsigned int irq) +{ + PIC1_IEN &= ~(1 << (irq - 32)); + PIC1_CREQ |= (1 << (irq - 32)); +} + +static void tcc8000_mask_irq0(unsigned int irq) +{ + PIC0_IEN &= ~(1 << irq); +} + +static void tcc8000_mask_irq1(unsigned int irq) +{ + PIC1_IEN &= ~(1 << (irq - 32)); +} + +static void tcc8000_ack_irq0(unsigned int irq) +{ + PIC0_CREQ |= (1 << irq); +} + +static void tcc8000_ack_irq1(unsigned int irq) +{ + PIC1_CREQ |= (1 << (irq - 32)); +} + +/* Enable IRQ */ +static void tcc8000_unmask_irq0(unsigned int irq) +{ + PIC0_IEN |= (1 << irq); + PIC0_INTOEN |= (1 << irq); +} + +static void tcc8000_unmask_irq1(unsigned int irq) +{ + PIC1_IEN |= (1 << (irq - 32)); + PIC1_INTOEN |= (1 << (irq - 32)); +} + +static struct irq_chip tcc8000_irq_chip0 = { + .name = "tcc_irq0", + .mask = tcc8000_mask_irq0, + .ack = tcc8000_ack_irq0, + .mask_ack = tcc8000_mask_ack_irq0, + .unmask = tcc8000_unmask_irq0, +}; + +static struct irq_chip tcc8000_irq_chip1 = { + .name = "tcc_irq1", + .mask = tcc8000_mask_irq1, + .ack = tcc8000_ack_irq1, + .mask_ack = tcc8000_mask_ack_irq1, + .unmask = tcc8000_unmask_irq1, +}; + +void __init tcc8k_init_irq(void) +{ + int irqno; + + /* Mask and clear all interrupts */ + PIC0_IEN = 0x00000000; + PIC0_CREQ = 0xffffffff; + PIC1_IEN = 0x00000000; + PIC1_CREQ = 0xffffffff; + + PIC0_MEN0 = 0x00000003; + PIC1_MEN1 = 0x00000003; + PIC1_MEN = 0x00000003; + + /* let all IRQs be level triggered */ + PIC0_TMODE = 0xffffffff; + PIC1_TMODE = 0xffffffff; + /* all IRQs are IRQs (not FIQs) */ + PIC0_IRQSEL = 0xffffffff; + PIC1_IRQSEL = 0xffffffff; + + for (irqno = 0; irqno < NR_IRQS; irqno++) { + if (irqno < 32) + set_irq_chip(irqno, &tcc8000_irq_chip0); + else + set_irq_chip(irqno, &tcc8000_irq_chip1); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } +} diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c new file mode 100644 index 000000000000..78d06008841d --- /dev/null +++ b/arch/arm/mach-tcc8k/time.c @@ -0,0 +1,149 @@ +/* + * TCC8000 system timer setup + * + * (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL version 2. + * + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> + +#include <asm/mach/time.h> + +#include <mach/tcc8k-regs.h> +#include <mach/irqs.h> + +#include "common.h" + +static void __iomem *timer_base; + +static cycle_t tcc_get_cycles(struct clocksource *cs) +{ + return __raw_readl(timer_base + TC32MCNT_OFFS); +} + +static struct clocksource clocksource_tcc = { + .name = "tcc_tc32", + .rating = 200, + .read = tcc_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 28, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int tcc_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS); + + __raw_writel(reg + evt, timer_base + TC32CMP0_OFFS); + return 0; +} + +static void tcc_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long tc32irq; + + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS); + tc32irq |= TC32IRQ_IRQEN0; + __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS); + tc32irq &= ~TC32IRQ_IRQEN0; + __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS); + break; + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* Acknowledge TC32 interrupt by reading TC32IRQ */ + __raw_readl(timer_base + TC32IRQ_OFFS); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct clock_event_device clockevent_tcc = { + .name = "tcc_timer1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = tcc_set_mode, + .set_next_event = tcc_set_next_event, + .rating = 200, +}; + +static struct irqaction tcc8k_timer_irq = { + .name = "TC32_timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = tcc8k_timer_interrupt, + .dev_id = &clockevent_tcc, +}; + +static int __init tcc_clockevent_init(struct clk *clock) +{ + unsigned int c = clk_get_rate(clock); + + clocksource_tcc.mult = clocksource_hz2mult(c, + clocksource_tcc.shift); + clocksource_register(&clocksource_tcc); + + clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC, + clockevent_tcc.shift); + clockevent_tcc.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_tcc); + clockevent_tcc.min_delta_ns = + clockevent_delta2ns(0xff, &clockevent_tcc); + + clockevent_tcc.cpumask = cpumask_of(0); + + clockevents_register_device(&clockevent_tcc); + + return 0; +} + +void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq) +{ + u32 reg; + + timer_base = base; + tcc8k_timer_irq.irq = irq; + + /* Enable clocks */ + clk_enable(clock); + + /* Initialize 32-bit timer */ + reg = __raw_readl(timer_base + TC32EN_OFFS); + reg &= ~TC32EN_ENABLE; /* Disable timer */ + __raw_writel(reg, timer_base + TC32EN_OFFS); + /* Free running timer, counting from 0 to 0xffffffff */ + __raw_writel(0, timer_base + TC32EN_OFFS); + __raw_writel(0, timer_base + TC32LDV_OFFS); + reg = __raw_readl(timer_base + TC32IRQ_OFFS); + reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */ + __raw_writel(reg, timer_base + TC32IRQ_OFFS); + + __raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS); + + tcc_clockevent_init(clock); + setup_irq(irq, &tcc8k_timer_irq); +} diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index a57713c1954a..acd9552f8ada 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -16,6 +16,10 @@ config ARCH_TEGRA_2x_SOC endchoice +config TEGRA_PCI + bool "PCI Express support" + select PCI + comment "Tegra board type" config MACH_HARMONY @@ -47,4 +51,11 @@ config TEGRA_DEBUG_UARTE endchoice +config TEGRA_SYSTEM_DMA + bool "Enable system DMA driver for NVIDIA Tegra SoCs" + default y + help + Adds system DMA functionality for NVIDIA Tegra SoCs, used by + several Tegra device drivers + endif diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 51e9370eed99..cdbc68e4c0ca 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,14 +1,21 @@ obj-y += common.o obj-y += io.o -obj-y += irq.o +obj-y += irq.o legacy_irq.o obj-y += clock.o obj-y += timer.o obj-y += gpio.o obj-y += pinmux.o +obj-y += fuse.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clock.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_dvfs.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pinmux-t2-tables.o obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o +obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o +obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-${CONFIG_MACH_HARMONY} += board-harmony.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pinmux.o +obj-${CONFIG_MACH_HARMONY} += board-harmony-pcie.o diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c new file mode 100644 index 000000000000..f7e7d4514b6a --- /dev/null +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-tegra/board-harmony-pcie.c + * + * Copyright (C) 2010 CompuLab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/err.h> +#include <linux/regulator/consumer.h> + +#include <asm/mach-types.h> + +#include <mach/pinmux.h> +#include "board.h" + +#ifdef CONFIG_TEGRA_PCI + +static int __init harmony_pcie_init(void) +{ + int err; + + if (!machine_is_harmony()) + return 0; + + tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_NORMAL); + tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_NORMAL); + tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_NORMAL); + + err = tegra_pcie_init(true, true); + if (err) + goto err_pcie; + + return 0; + +err_pcie: + tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_TRISTATE); + tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_TRISTATE); + tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_TRISTATE); + + return err; +} + +subsys_initcall(harmony_pcie_init); + +#endif diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 3d06354136f2..0de565ca37c5 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -27,6 +27,7 @@ void __init tegra_common_init(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); void __init tegra_init_clock(void); +int __init tegra_pcie_init(bool init_port0, bool init_port1); extern struct sys_timer tegra_timer; #endif diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 03ad578349b9..ae19f95585be 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -24,13 +24,80 @@ #include <linux/debugfs.h> #include <linux/slab.h> #include <linux/seq_file.h> +#include <linux/regulator/consumer.h> #include <asm/clkdev.h> #include "clock.h" +#include "board.h" +#include "fuse.h" static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clock_lock); +static DEFINE_MUTEX(dvfs_lock); + +static int clk_is_dvfs(struct clk *c) +{ + return (c->dvfs != NULL); +}; + +static int dvfs_set_rate(struct dvfs *d, unsigned long rate) +{ + struct dvfs_table *t; + + if (d->table == NULL) + return -ENODEV; + + for (t = d->table; t->rate != 0; t++) { + if (rate <= t->rate) { + if (!d->reg) + return 0; + + return regulator_set_voltage(d->reg, + t->millivolts * 1000, + d->max_millivolts * 1000); + } + } + + return -EINVAL; +} + +static void dvfs_init(struct clk *c) +{ + int process_id; + int i; + struct dvfs_table *table; + + process_id = c->dvfs->cpu ? tegra_core_process_id() : + tegra_cpu_process_id(); + + for (i = 0; i < c->dvfs->process_id_table_length; i++) + if (process_id == c->dvfs->process_id_table[i].process_id) + c->dvfs->table = c->dvfs->process_id_table[i].table; + + if (c->dvfs->table == NULL) { + pr_err("Failed to find dvfs table for clock %s process %d\n", + c->name, process_id); + return; + } + + c->dvfs->max_millivolts = 0; + for (table = c->dvfs->table; table->rate != 0; table++) + if (c->dvfs->max_millivolts < table->millivolts) + c->dvfs->max_millivolts = table->millivolts; + + c->dvfs->reg = regulator_get(NULL, c->dvfs->reg_id); + + if (IS_ERR(c->dvfs->reg)) { + pr_err("Failed to get regulator %s for clock %s\n", + c->dvfs->reg_id, c->name); + c->dvfs->reg = NULL; + return; + } + + if (c->refcnt > 0) + dvfs_set_rate(c->dvfs, c->rate); +} struct clk *tegra_get_clock_by_name(const char *name) { @@ -48,14 +115,31 @@ struct clk *tegra_get_clock_by_name(const char *name) return ret; } +static void clk_recalculate_rate(struct clk *c) +{ + u64 rate; + + if (!c->parent) + return; + + rate = c->parent->rate; + + if (c->mul != 0 && c->div != 0) { + rate = rate * c->mul; + do_div(rate, c->div); + } + + if (rate > c->max_rate) + pr_warn("clocks: Set clock %s to rate %llu, max is %lu\n", + c->name, rate, c->max_rate); + + c->rate = rate; +} + int clk_reparent(struct clk *c, struct clk *parent) { pr_debug("%s: %s\n", __func__, c->name); - if (c->refcnt && c->parent) - clk_disable_locked(c->parent); c->parent = parent; - if (c->refcnt && c->parent) - clk_enable_locked(c->parent); list_del(&c->sibling); list_add_tail(&c->sibling, &parent->children); return 0; @@ -67,8 +151,7 @@ static void propagate_rate(struct clk *c) pr_debug("%s: %s\n", __func__, c->name); list_for_each_entry(clkp, &c->children, sibling) { pr_debug(" %s\n", clkp->name); - if (clkp->ops->recalculate_rate) - clkp->ops->recalculate_rate(clkp); + clk_recalculate_rate(clkp); propagate_rate(clkp); } } @@ -77,6 +160,8 @@ void clk_init(struct clk *c) { unsigned long flags; + pr_debug("%s: %s\n", __func__, c->name); + spin_lock_irqsave(&clock_lock, flags); INIT_LIST_HEAD(&c->children); @@ -85,6 +170,8 @@ void clk_init(struct clk *c) if (c->ops && c->ops->init) c->ops->init(c); + clk_recalculate_rate(c); + list_add(&c->node, &clocks); if (c->parent) @@ -122,13 +209,38 @@ int clk_enable_locked(struct clk *c) return 0; } +int clk_enable_cansleep(struct clk *c) +{ + int ret; + unsigned long flags; + + mutex_lock(&dvfs_lock); + + if (clk_is_dvfs(c) && c->refcnt > 0) + dvfs_set_rate(c->dvfs, c->rate); + + spin_lock_irqsave(&clock_lock, flags); + ret = clk_enable_locked(c); + spin_unlock_irqrestore(&clock_lock, flags); + + mutex_unlock(&dvfs_lock); + + return ret; +} +EXPORT_SYMBOL(clk_enable_cansleep); + int clk_enable(struct clk *c) { int ret; unsigned long flags; + + if (clk_is_dvfs(c)) + BUG(); + spin_lock_irqsave(&clock_lock, flags); ret = clk_enable_locked(c); spin_unlock_irqrestore(&clock_lock, flags); + return ret; } EXPORT_SYMBOL(clk_enable); @@ -152,9 +264,30 @@ void clk_disable_locked(struct clk *c) c->refcnt--; } +void clk_disable_cansleep(struct clk *c) +{ + unsigned long flags; + + mutex_lock(&dvfs_lock); + + spin_lock_irqsave(&clock_lock, flags); + clk_disable_locked(c); + spin_unlock_irqrestore(&clock_lock, flags); + + if (clk_is_dvfs(c) && c->refcnt == 0) + dvfs_set_rate(c->dvfs, c->rate); + + mutex_unlock(&dvfs_lock); +} +EXPORT_SYMBOL(clk_disable_cansleep); + void clk_disable(struct clk *c) { unsigned long flags; + + if (clk_is_dvfs(c)) + BUG(); + spin_lock_irqsave(&clock_lock, flags); clk_disable_locked(c); spin_unlock_irqrestore(&clock_lock, flags); @@ -175,6 +308,8 @@ int clk_set_parent_locked(struct clk *c, struct clk *parent) if (ret) return ret; + clk_recalculate_rate(c); + propagate_rate(c); return 0; @@ -197,22 +332,69 @@ struct clk *clk_get_parent(struct clk *c) } EXPORT_SYMBOL(clk_get_parent); -int clk_set_rate(struct clk *c, unsigned long rate) +int clk_set_rate_locked(struct clk *c, unsigned long rate) +{ + int ret; + + if (rate > c->max_rate) + rate = c->max_rate; + + if (!c->ops || !c->ops->set_rate) + return -ENOSYS; + + ret = c->ops->set_rate(c, rate); + + if (ret) + return ret; + + clk_recalculate_rate(c); + + propagate_rate(c); + + return 0; +} + +int clk_set_rate_cansleep(struct clk *c, unsigned long rate) { int ret = 0; unsigned long flags; + pr_debug("%s: %s\n", __func__, c->name); + + mutex_lock(&dvfs_lock); + + if (rate > c->rate) + ret = dvfs_set_rate(c->dvfs, rate); + if (ret) + goto out; + spin_lock_irqsave(&clock_lock, flags); + ret = clk_set_rate_locked(c, rate); + spin_unlock_irqrestore(&clock_lock, flags); - pr_debug("%s: %s\n", __func__, c->name); + if (ret) + goto out; - if (c->ops && c->ops->set_rate) - ret = c->ops->set_rate(c, rate); - else - ret = -ENOSYS; + ret = dvfs_set_rate(c->dvfs, rate); - propagate_rate(c); +out: + mutex_unlock(&dvfs_lock); + return ret; +} +EXPORT_SYMBOL(clk_set_rate_cansleep); + +int clk_set_rate(struct clk *c, unsigned long rate) +{ + int ret = 0; + unsigned long flags; + + pr_debug("%s: %s\n", __func__, c->name); + + if (clk_is_dvfs(c)) + BUG(); + spin_lock_irqsave(&clock_lock, flags); + ret = clk_set_rate_locked(c, rate); spin_unlock_irqrestore(&clock_lock, flags); return ret; @@ -235,6 +417,20 @@ unsigned long clk_get_rate(struct clk *c) } EXPORT_SYMBOL(clk_get_rate); +long clk_round_rate(struct clk *c, unsigned long rate) +{ + pr_debug("%s: %s\n", __func__, c->name); + + if (!c->ops || !c->ops->round_rate) + return -ENOSYS; + + if (rate > c->max_rate) + rate = c->max_rate; + + return c->ops->round_rate(c, rate); +} +EXPORT_SYMBOL(clk_round_rate); + static int tegra_clk_init_one_from_table(struct tegra_clk_init_table *table) { struct clk *c; @@ -308,13 +504,28 @@ void tegra_periph_reset_assert(struct clk *c) } EXPORT_SYMBOL(tegra_periph_reset_assert); -int __init tegra_init_clock(void) +void __init tegra_init_clock(void) { tegra2_init_clocks(); +} + +int __init tegra_init_dvfs(void) +{ + struct clk *c, *safe; + + mutex_lock(&dvfs_lock); + + list_for_each_entry_safe(c, safe, &clocks, node) + if (c->dvfs) + dvfs_init(c); + + mutex_unlock(&dvfs_lock); return 0; } +late_initcall(tegra_init_dvfs); + #ifdef CONFIG_DEBUG_FS static struct dentry *clk_debugfs_root; @@ -324,7 +535,7 @@ static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level) struct clk *child; struct clk *safe; const char *state = "uninit"; - char div[5] = {0}; + char div[8] = {0}; if (c->state == ON) state = "on"; @@ -332,16 +543,26 @@ static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level) state = "off"; if (c->mul != 0 && c->div != 0) { - BUG_ON(c->mul > 2); - if (c->mul > c->div) - snprintf(div, sizeof(div), "x%d", c->mul / c->div); - else + if (c->mul > c->div) { + int mul = c->mul / c->div; + int mul2 = (c->mul * 10 / c->div) % 10; + int mul3 = (c->mul * 10) % c->div; + if (mul2 == 0 && mul3 == 0) + snprintf(div, sizeof(div), "x%d", mul); + else if (mul3 == 0) + snprintf(div, sizeof(div), "x%d.%d", mul, mul2); + else + snprintf(div, sizeof(div), "x%d.%d..", mul, mul2); + } else { snprintf(div, sizeof(div), "%d%s", c->div / c->mul, (c->div % c->mul) ? ".5" : ""); + } } - seq_printf(s, "%*s%-*s %-6s %-3d %-5s %-10lu\n", - level * 3 + 1, c->set ? "" : "*", + seq_printf(s, "%*s%c%c%-*s %-6s %-3d %-8s %-10lu\n", + level * 3 + 1, "", + c->rate > c->max_rate ? '!' : ' ', + !c->set ? '*' : ' ', 30 - level * 3, c->name, state, c->refcnt, div, c->rate); list_for_each_entry_safe(child, safe, &c->children, sibling) { @@ -353,8 +574,8 @@ static int clock_tree_show(struct seq_file *s, void *data) { struct clk *c; unsigned long flags; - seq_printf(s, " clock state ref div rate \n"); - seq_printf(s, "-----------------------------------------------------------\n"); + seq_printf(s, " clock state ref div rate\n"); + seq_printf(s, "--------------------------------------------------------------\n"); spin_lock_irqsave(&clock_lock, flags); list_for_each_entry(c, &clocks, node) if (c->parent == NULL) diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h index af7c70e2a3ba..94fd859770f1 100644 --- a/arch/arm/mach-tegra/clock.h +++ b/arch/arm/mach-tegra/clock.h @@ -27,18 +27,43 @@ #define DIV_U71 (1 << 1) #define DIV_U71_FIXED (1 << 2) #define DIV_2 (1 << 3) -#define PLL_FIXED (1 << 4) -#define PLL_HAS_CPCON (1 << 5) -#define MUX (1 << 6) -#define PLLD (1 << 7) -#define PERIPH_NO_RESET (1 << 8) -#define PERIPH_NO_ENB (1 << 9) -#define PERIPH_EMC_ENB (1 << 10) -#define PERIPH_MANUAL_RESET (1 << 11) -#define PLL_ALT_MISC_REG (1 << 12) +#define DIV_U16 (1 << 4) +#define PLL_FIXED (1 << 5) +#define PLL_HAS_CPCON (1 << 6) +#define MUX (1 << 7) +#define PLLD (1 << 8) +#define PERIPH_NO_RESET (1 << 9) +#define PERIPH_NO_ENB (1 << 10) +#define PERIPH_EMC_ENB (1 << 11) +#define PERIPH_MANUAL_RESET (1 << 12) +#define PLL_ALT_MISC_REG (1 << 13) +#define PLLU (1 << 14) #define ENABLE_ON_INIT (1 << 28) struct clk; +struct regulator; + +struct dvfs_table { + unsigned long rate; + int millivolts; +}; + +struct dvfs_process_id_table { + int process_id; + struct dvfs_table *table; +}; + + +struct dvfs { + struct regulator *reg; + struct dvfs_table *table; + int max_millivolts; + + int process_id_table_length; + const char *reg_id; + bool cpu; + struct dvfs_process_id_table process_id_table[]; +}; struct clk_mux_sel { struct clk *input; @@ -58,12 +83,9 @@ struct clk_ops { void (*init)(struct clk *); int (*enable)(struct clk *); void (*disable)(struct clk *); - void (*recalc)(struct clk *); int (*set_parent)(struct clk *, struct clk *); int (*set_rate)(struct clk *, unsigned long); - unsigned long (*get_rate)(struct clk *); long (*round_rate)(struct clk *, unsigned long); - unsigned long (*recalculate_rate)(struct clk *); }; enum clk_state { @@ -85,6 +107,7 @@ struct clk { struct clk *parent; struct clk_lookup lookup; unsigned long rate; + unsigned long max_rate; u32 flags; u32 refcnt; const char *name; @@ -103,10 +126,6 @@ struct clk { unsigned long cf_max; unsigned long vco_min; unsigned long vco_max; - u32 m; - u32 n; - u32 p; - u32 cpcon; const struct clk_pll_table *pll_table; /* DIV */ @@ -117,6 +136,12 @@ struct clk { const struct clk_mux_sel *inputs; u32 sel; u32 reg_mask; + + /* Virtual cpu clock */ + struct clk *main; + struct clk *backup; + + struct dvfs *dvfs; }; @@ -141,6 +166,7 @@ unsigned long clk_measure_input_freq(void); void clk_disable_locked(struct clk *c); int clk_enable_locked(struct clk *c); int clk_set_parent_locked(struct clk *c, struct clk *parent); +int clk_set_rate_locked(struct clk *c, unsigned long rate); int clk_reparent(struct clk *c, struct clk *parent); void tegra_clk_init_from_table(struct tegra_clk_init_table *table); diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 039a514b61ef..7c91e2b9d643 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -19,13 +19,17 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/clk.h> +#include <linux/delay.h> #include <asm/hardware/cache-l2x0.h> #include <mach/iomap.h> +#include <mach/dma.h> #include "board.h" #include "clock.h" +#include "fuse.h" static __initdata struct tegra_clk_init_table common_clk_init_table[] = { /* name parent rate enabled */ @@ -35,8 +39,8 @@ static __initdata struct tegra_clk_init_table common_clk_init_table[] = { { "pll_p_out2", "pll_p", 48000000, true }, { "pll_p_out3", "pll_p", 72000000, true }, { "pll_p_out4", "pll_p", 108000000, true }, - { "sys", "pll_p_out4", 108000000, true }, - { "hclk", "sys", 108000000, true }, + { "sclk", "pll_p_out4", 108000000, true }, + { "hclk", "sclk", 108000000, true }, { "pclk", "hclk", 54000000, true }, { NULL, NULL, 0, 0}, }; @@ -51,11 +55,16 @@ void __init tegra_init_cache(void) l2x0_init(p, 0x6C080001, 0x8200c3fe); #endif + } void __init tegra_common_init(void) { + tegra_init_fuse(); tegra_init_clock(); tegra_clk_init_from_table(common_clk_init_table); tegra_init_cache(); +#ifdef CONFIG_TEGRA_SYSTEM_DMA + tegra_dma_init(); +#endif } diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c new file mode 100644 index 000000000000..fea5719c7072 --- /dev/null +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -0,0 +1,185 @@ +/* + * arch/arm/mach-tegra/cpu-tegra.c + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross <ccross@google.com> + * Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/system.h> + +#include <mach/hardware.h> +#include <mach/clk.h> + +/* Frequency table index must be sequential starting at 0 */ +static struct cpufreq_frequency_table freq_table[] = { + { 0, 312000 }, + { 1, 456000 }, + { 2, 608000 }, + { 3, 760000 }, + { 4, 816000 }, + { 5, 912000 }, + { 6, 1000000 }, + { 7, CPUFREQ_TABLE_END }, +}; + +#define NUM_CPUS 2 + +static struct clk *cpu_clk; + +static unsigned long target_cpu_speed[NUM_CPUS]; + +int tegra_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, freq_table); +} + +unsigned int tegra_getspeed(unsigned int cpu) +{ + unsigned long rate; + + if (cpu >= NUM_CPUS) + return 0; + + rate = clk_get_rate(cpu_clk) / 1000; + return rate; +} + +static int tegra_update_cpu_speed(void) +{ + int i; + unsigned long rate = 0; + int ret = 0; + struct cpufreq_freqs freqs; + + for_each_online_cpu(i) + rate = max(rate, target_cpu_speed[i]); + + freqs.old = tegra_getspeed(0); + freqs.new = rate; + + if (freqs.old == freqs.new) + return ret; + + for_each_online_cpu(freqs.cpu) + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + +#ifdef CONFIG_CPU_FREQ_DEBUG + printk(KERN_DEBUG "cpufreq-tegra: transition: %u --> %u\n", + freqs.old, freqs.new); +#endif + + ret = clk_set_rate_cansleep(cpu_clk, freqs.new * 1000); + if (ret) { + pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n", + freqs.new); + return ret; + } + + for_each_online_cpu(freqs.cpu) + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +static int tegra_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + int idx; + unsigned int freq; + + cpufreq_frequency_table_target(policy, freq_table, target_freq, + relation, &idx); + + freq = freq_table[idx].frequency; + + target_cpu_speed[policy->cpu] = freq; + + return tegra_update_cpu_speed(); +} + +static int tegra_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu >= NUM_CPUS) + return -EINVAL; + + cpu_clk = clk_get_sys(NULL, "cpu"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + cpufreq_frequency_table_cpuinfo(policy, freq_table); + cpufreq_frequency_table_get_attr(freq_table, policy->cpu); + policy->cur = tegra_getspeed(policy->cpu); + target_cpu_speed[policy->cpu] = policy->cur; + + /* FIXME: what's the actual transition time? */ + policy->cpuinfo.transition_latency = 300 * 1000; + + policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; + cpumask_copy(policy->related_cpus, cpu_possible_mask); + + return 0; +} + +static int tegra_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_cpuinfo(policy, freq_table); + clk_put(cpu_clk); + return 0; +} + +static struct freq_attr *tegra_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver tegra_cpufreq_driver = { + .verify = tegra_verify_speed, + .target = tegra_target, + .get = tegra_getspeed, + .init = tegra_cpu_init, + .exit = tegra_cpu_exit, + .name = "tegra", + .attr = tegra_cpufreq_attr, +}; + +static int __init tegra_cpufreq_init(void) +{ + return cpufreq_register_driver(&tegra_cpufreq_driver); +} + +static void __exit tegra_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&tegra_cpufreq_driver); +} + + +MODULE_AUTHOR("Colin Cross <ccross@android.com>"); +MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2"); +MODULE_LICENSE("GPL"); +module_init(tegra_cpufreq_init); +module_exit(tegra_cpufreq_exit); diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c new file mode 100644 index 000000000000..edda6ec5e925 --- /dev/null +++ b/arch/arm/mach-tegra/dma.c @@ -0,0 +1,752 @@ +/* + * arch/arm/mach-tegra/dma.c + * + * System DMA driver for NVIDIA Tegra SoCs + * + * Copyright (c) 2008-2009, NVIDIA Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/err.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <mach/dma.h> +#include <mach/irqs.h> +#include <mach/iomap.h> + +#define APB_DMA_GEN 0x000 +#define GEN_ENABLE (1<<31) + +#define APB_DMA_CNTRL 0x010 + +#define APB_DMA_IRQ_MASK 0x01c + +#define APB_DMA_IRQ_MASK_SET 0x020 + +#define APB_DMA_CHAN_CSR 0x000 +#define CSR_ENB (1<<31) +#define CSR_IE_EOC (1<<30) +#define CSR_HOLD (1<<29) +#define CSR_DIR (1<<28) +#define CSR_ONCE (1<<27) +#define CSR_FLOW (1<<21) +#define CSR_REQ_SEL_SHIFT 16 +#define CSR_REQ_SEL_MASK (0x1F<<CSR_REQ_SEL_SHIFT) +#define CSR_REQ_SEL_INVALID (31<<CSR_REQ_SEL_SHIFT) +#define CSR_WCOUNT_SHIFT 2 +#define CSR_WCOUNT_MASK 0xFFFC + +#define APB_DMA_CHAN_STA 0x004 +#define STA_BUSY (1<<31) +#define STA_ISE_EOC (1<<30) +#define STA_HALT (1<<29) +#define STA_PING_PONG (1<<28) +#define STA_COUNT_SHIFT 2 +#define STA_COUNT_MASK 0xFFFC + +#define APB_DMA_CHAN_AHB_PTR 0x010 + +#define APB_DMA_CHAN_AHB_SEQ 0x014 +#define AHB_SEQ_INTR_ENB (1<<31) +#define AHB_SEQ_BUS_WIDTH_SHIFT 28 +#define AHB_SEQ_BUS_WIDTH_MASK (0x7<<AHB_SEQ_BUS_WIDTH_SHIFT) +#define AHB_SEQ_BUS_WIDTH_8 (0<<AHB_SEQ_BUS_WIDTH_SHIFT) +#define AHB_SEQ_BUS_WIDTH_16 (1<<AHB_SEQ_BUS_WIDTH_SHIFT) +#define AHB_SEQ_BUS_WIDTH_32 (2<<AHB_SEQ_BUS_WIDTH_SHIFT) +#define AHB_SEQ_BUS_WIDTH_64 (3<<AHB_SEQ_BUS_WIDTH_SHIFT) +#define AHB_SEQ_BUS_WIDTH_128 (4<<AHB_SEQ_BUS_WIDTH_SHIFT) +#define AHB_SEQ_DATA_SWAP (1<<27) +#define AHB_SEQ_BURST_MASK (0x7<<24) +#define AHB_SEQ_BURST_1 (4<<24) +#define AHB_SEQ_BURST_4 (5<<24) +#define AHB_SEQ_BURST_8 (6<<24) +#define AHB_SEQ_DBL_BUF (1<<19) +#define AHB_SEQ_WRAP_SHIFT 16 +#define AHB_SEQ_WRAP_MASK (0x7<<AHB_SEQ_WRAP_SHIFT) + +#define APB_DMA_CHAN_APB_PTR 0x018 + +#define APB_DMA_CHAN_APB_SEQ 0x01c +#define APB_SEQ_BUS_WIDTH_SHIFT 28 +#define APB_SEQ_BUS_WIDTH_MASK (0x7<<APB_SEQ_BUS_WIDTH_SHIFT) +#define APB_SEQ_BUS_WIDTH_8 (0<<APB_SEQ_BUS_WIDTH_SHIFT) +#define APB_SEQ_BUS_WIDTH_16 (1<<APB_SEQ_BUS_WIDTH_SHIFT) +#define APB_SEQ_BUS_WIDTH_32 (2<<APB_SEQ_BUS_WIDTH_SHIFT) +#define APB_SEQ_BUS_WIDTH_64 (3<<APB_SEQ_BUS_WIDTH_SHIFT) +#define APB_SEQ_BUS_WIDTH_128 (4<<APB_SEQ_BUS_WIDTH_SHIFT) +#define APB_SEQ_DATA_SWAP (1<<27) +#define APB_SEQ_WRAP_SHIFT 16 +#define APB_SEQ_WRAP_MASK (0x7<<APB_SEQ_WRAP_SHIFT) + +#define TEGRA_SYSTEM_DMA_CH_NR 16 +#define TEGRA_SYSTEM_DMA_AVP_CH_NUM 4 +#define TEGRA_SYSTEM_DMA_CH_MIN 0 +#define TEGRA_SYSTEM_DMA_CH_MAX \ + (TEGRA_SYSTEM_DMA_CH_NR - TEGRA_SYSTEM_DMA_AVP_CH_NUM - 1) + +#define NV_DMA_MAX_TRASFER_SIZE 0x10000 + +const unsigned int ahb_addr_wrap_table[8] = { + 0, 32, 64, 128, 256, 512, 1024, 2048 +}; + +const unsigned int apb_addr_wrap_table[8] = {0, 1, 2, 4, 8, 16, 32, 64}; + +const unsigned int bus_width_table[5] = {8, 16, 32, 64, 128}; + +#define TEGRA_DMA_NAME_SIZE 16 +struct tegra_dma_channel { + struct list_head list; + int id; + spinlock_t lock; + char name[TEGRA_DMA_NAME_SIZE]; + void __iomem *addr; + int mode; + int irq; + + /* Register shadow */ + u32 csr; + u32 ahb_seq; + u32 ahb_ptr; + u32 apb_seq; + u32 apb_ptr; +}; + +#define NV_DMA_MAX_CHANNELS 32 + +static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS); +static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS]; + +static void tegra_dma_update_hw(struct tegra_dma_channel *ch, + struct tegra_dma_req *req); +static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch, + struct tegra_dma_req *req); +static void tegra_dma_init_hw(struct tegra_dma_channel *ch); +static void tegra_dma_stop(struct tegra_dma_channel *ch); + +void tegra_dma_flush(struct tegra_dma_channel *ch) +{ +} +EXPORT_SYMBOL(tegra_dma_flush); + +void tegra_dma_dequeue(struct tegra_dma_channel *ch) +{ + struct tegra_dma_req *req; + + req = list_entry(ch->list.next, typeof(*req), node); + + tegra_dma_dequeue_req(ch, req); + return; +} + +void tegra_dma_stop(struct tegra_dma_channel *ch) +{ + unsigned int csr; + unsigned int status; + + csr = ch->csr; + csr &= ~CSR_IE_EOC; + writel(csr, ch->addr + APB_DMA_CHAN_CSR); + + csr &= ~CSR_ENB; + writel(csr, ch->addr + APB_DMA_CHAN_CSR); + + status = readl(ch->addr + APB_DMA_CHAN_STA); + if (status & STA_ISE_EOC) + writel(status, ch->addr + APB_DMA_CHAN_STA); +} + +int tegra_dma_cancel(struct tegra_dma_channel *ch) +{ + unsigned int csr; + unsigned long irq_flags; + + spin_lock_irqsave(&ch->lock, irq_flags); + while (!list_empty(&ch->list)) + list_del(ch->list.next); + + csr = ch->csr; + csr &= ~CSR_REQ_SEL_MASK; + csr |= CSR_REQ_SEL_INVALID; + + /* Set the enable as that is not shadowed */ + csr |= CSR_ENB; + writel(csr, ch->addr + APB_DMA_CHAN_CSR); + + tegra_dma_stop(ch); + + spin_unlock_irqrestore(&ch->lock, irq_flags); + return 0; +} + +int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, + struct tegra_dma_req *_req) +{ + unsigned int csr; + unsigned int status; + struct tegra_dma_req *req = NULL; + int found = 0; + unsigned long irq_flags; + int to_transfer; + int req_transfer_count; + + spin_lock_irqsave(&ch->lock, irq_flags); + list_for_each_entry(req, &ch->list, node) { + if (req == _req) { + list_del(&req->node); + found = 1; + break; + } + } + if (!found) { + spin_unlock_irqrestore(&ch->lock, irq_flags); + return 0; + } + + /* STOP the DMA and get the transfer count. + * Getting the transfer count is tricky. + * - Change the source selector to invalid to stop the DMA from + * FIFO to memory. + * - Read the status register to know the number of pending + * bytes to be transfered. + * - Finally stop or program the DMA to the next buffer in the + * list. + */ + csr = ch->csr; + csr &= ~CSR_REQ_SEL_MASK; + csr |= CSR_REQ_SEL_INVALID; + + /* Set the enable as that is not shadowed */ + csr |= CSR_ENB; + writel(csr, ch->addr + APB_DMA_CHAN_CSR); + + /* Get the transfer count */ + status = readl(ch->addr + APB_DMA_CHAN_STA); + to_transfer = (status & STA_COUNT_MASK) >> STA_COUNT_SHIFT; + req_transfer_count = (ch->csr & CSR_WCOUNT_MASK) >> CSR_WCOUNT_SHIFT; + req_transfer_count += 1; + to_transfer += 1; + + req->bytes_transferred = req_transfer_count; + + if (status & STA_BUSY) + req->bytes_transferred -= to_transfer; + + /* In continous transfer mode, DMA only tracks the count of the + * half DMA buffer. So, if the DMA already finished half the DMA + * then add the half buffer to the completed count. + * + * FIXME: There can be a race here. What if the req to + * dequue happens at the same time as the DMA just moved to + * the new buffer and SW didn't yet received the interrupt? + */ + if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) + if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) + req->bytes_transferred += req_transfer_count; + + req->bytes_transferred *= 4; + + tegra_dma_stop(ch); + if (!list_empty(&ch->list)) { + /* if the list is not empty, queue the next request */ + struct tegra_dma_req *next_req; + next_req = list_entry(ch->list.next, + typeof(*next_req), node); + tegra_dma_update_hw(ch, next_req); + } + req->status = -TEGRA_DMA_REQ_ERROR_ABORTED; + + spin_unlock_irqrestore(&ch->lock, irq_flags); + + /* Callback should be called without any lock */ + req->complete(req); + return 0; +} +EXPORT_SYMBOL(tegra_dma_dequeue_req); + +bool tegra_dma_is_empty(struct tegra_dma_channel *ch) +{ + unsigned long irq_flags; + bool is_empty; + + spin_lock_irqsave(&ch->lock, irq_flags); + if (list_empty(&ch->list)) + is_empty = true; + else + is_empty = false; + spin_unlock_irqrestore(&ch->lock, irq_flags); + return is_empty; +} +EXPORT_SYMBOL(tegra_dma_is_empty); + +bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch, + struct tegra_dma_req *_req) +{ + unsigned long irq_flags; + struct tegra_dma_req *req; + + spin_lock_irqsave(&ch->lock, irq_flags); + list_for_each_entry(req, &ch->list, node) { + if (req == _req) { + spin_unlock_irqrestore(&ch->lock, irq_flags); + return true; + } + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return false; +} +EXPORT_SYMBOL(tegra_dma_is_req_inflight); + +int tegra_dma_enqueue_req(struct tegra_dma_channel *ch, + struct tegra_dma_req *req) +{ + unsigned long irq_flags; + int start_dma = 0; + + if (req->size > NV_DMA_MAX_TRASFER_SIZE || + req->source_addr & 0x3 || req->dest_addr & 0x3) { + pr_err("Invalid DMA request for channel %d\n", ch->id); + return -EINVAL; + } + + spin_lock_irqsave(&ch->lock, irq_flags); + + req->bytes_transferred = 0; + req->status = 0; + req->buffer_status = 0; + if (list_empty(&ch->list)) + start_dma = 1; + + list_add_tail(&req->node, &ch->list); + + if (start_dma) + tegra_dma_update_hw(ch, req); + + spin_unlock_irqrestore(&ch->lock, irq_flags); + + return 0; +} +EXPORT_SYMBOL(tegra_dma_enqueue_req); + +struct tegra_dma_channel *tegra_dma_allocate_channel(int mode) +{ + int channel; + struct tegra_dma_channel *ch; + + /* first channel is the shared channel */ + if (mode & TEGRA_DMA_SHARED) { + channel = TEGRA_SYSTEM_DMA_CH_MIN; + } else { + channel = find_first_zero_bit(channel_usage, + ARRAY_SIZE(dma_channels)); + if (channel >= ARRAY_SIZE(dma_channels)) + return NULL; + } + __set_bit(channel, channel_usage); + ch = &dma_channels[channel]; + ch->mode = mode; + return ch; +} +EXPORT_SYMBOL(tegra_dma_allocate_channel); + +void tegra_dma_free_channel(struct tegra_dma_channel *ch) +{ + if (ch->mode & TEGRA_DMA_SHARED) + return; + tegra_dma_cancel(ch); + __clear_bit(ch->id, channel_usage); +} +EXPORT_SYMBOL(tegra_dma_free_channel); + +static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch, + struct tegra_dma_req *req) +{ + if (req->to_memory) { + ch->apb_ptr = req->source_addr; + ch->ahb_ptr = req->dest_addr; + } else { + ch->apb_ptr = req->dest_addr; + ch->ahb_ptr = req->source_addr; + } + writel(ch->apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR); + writel(ch->ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR); + + req->status = TEGRA_DMA_REQ_INFLIGHT; + return; +} + +static void tegra_dma_update_hw(struct tegra_dma_channel *ch, + struct tegra_dma_req *req) +{ + int ahb_addr_wrap; + int apb_addr_wrap; + int ahb_bus_width; + int apb_bus_width; + int index; + unsigned long csr; + + + ch->csr |= CSR_FLOW; + ch->csr &= ~CSR_REQ_SEL_MASK; + ch->csr |= req->req_sel << CSR_REQ_SEL_SHIFT; + ch->ahb_seq &= ~AHB_SEQ_BURST_MASK; + ch->ahb_seq |= AHB_SEQ_BURST_1; + + /* One shot mode is always single buffered, + * continuous mode is always double buffered + * */ + if (ch->mode & TEGRA_DMA_MODE_ONESHOT) { + ch->csr |= CSR_ONCE; + ch->ahb_seq &= ~AHB_SEQ_DBL_BUF; + ch->csr &= ~CSR_WCOUNT_MASK; + ch->csr |= ((req->size>>2) - 1) << CSR_WCOUNT_SHIFT; + } else { + ch->csr &= ~CSR_ONCE; + ch->ahb_seq |= AHB_SEQ_DBL_BUF; + + /* In double buffered mode, we set the size to half the + * requested size and interrupt when half the buffer + * is full */ + ch->csr &= ~CSR_WCOUNT_MASK; + ch->csr |= ((req->size>>3) - 1) << CSR_WCOUNT_SHIFT; + } + + if (req->to_memory) { + ch->csr &= ~CSR_DIR; + ch->apb_ptr = req->source_addr; + ch->ahb_ptr = req->dest_addr; + + apb_addr_wrap = req->source_wrap; + ahb_addr_wrap = req->dest_wrap; + apb_bus_width = req->source_bus_width; + ahb_bus_width = req->dest_bus_width; + + } else { + ch->csr |= CSR_DIR; + ch->apb_ptr = req->dest_addr; + ch->ahb_ptr = req->source_addr; + + apb_addr_wrap = req->dest_wrap; + ahb_addr_wrap = req->source_wrap; + apb_bus_width = req->dest_bus_width; + ahb_bus_width = req->source_bus_width; + } + + apb_addr_wrap >>= 2; + ahb_addr_wrap >>= 2; + + /* set address wrap for APB size */ + index = 0; + do { + if (apb_addr_wrap_table[index] == apb_addr_wrap) + break; + index++; + } while (index < ARRAY_SIZE(apb_addr_wrap_table)); + BUG_ON(index == ARRAY_SIZE(apb_addr_wrap_table)); + ch->apb_seq &= ~APB_SEQ_WRAP_MASK; + ch->apb_seq |= index << APB_SEQ_WRAP_SHIFT; + + /* set address wrap for AHB size */ + index = 0; + do { + if (ahb_addr_wrap_table[index] == ahb_addr_wrap) + break; + index++; + } while (index < ARRAY_SIZE(ahb_addr_wrap_table)); + BUG_ON(index == ARRAY_SIZE(ahb_addr_wrap_table)); + ch->ahb_seq &= ~AHB_SEQ_WRAP_MASK; + ch->ahb_seq |= index << AHB_SEQ_WRAP_SHIFT; + + for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) { + if (bus_width_table[index] == ahb_bus_width) + break; + } + BUG_ON(index == ARRAY_SIZE(bus_width_table)); + ch->ahb_seq &= ~AHB_SEQ_BUS_WIDTH_MASK; + ch->ahb_seq |= index << AHB_SEQ_BUS_WIDTH_SHIFT; + + for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) { + if (bus_width_table[index] == apb_bus_width) + break; + } + BUG_ON(index == ARRAY_SIZE(bus_width_table)); + ch->apb_seq &= ~APB_SEQ_BUS_WIDTH_MASK; + ch->apb_seq |= index << APB_SEQ_BUS_WIDTH_SHIFT; + + ch->csr |= CSR_IE_EOC; + + /* update hw registers with the shadow */ + writel(ch->csr, ch->addr + APB_DMA_CHAN_CSR); + writel(ch->apb_seq, ch->addr + APB_DMA_CHAN_APB_SEQ); + writel(ch->apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR); + writel(ch->ahb_seq, ch->addr + APB_DMA_CHAN_AHB_SEQ); + writel(ch->ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR); + + csr = ch->csr | CSR_ENB; + writel(csr, ch->addr + APB_DMA_CHAN_CSR); + + req->status = TEGRA_DMA_REQ_INFLIGHT; +} + +static void tegra_dma_init_hw(struct tegra_dma_channel *ch) +{ + /* One shot with an interrupt to CPU after transfer */ + ch->csr = CSR_ONCE | CSR_IE_EOC; + ch->ahb_seq = AHB_SEQ_BUS_WIDTH_32 | AHB_SEQ_INTR_ENB; + ch->apb_seq = APB_SEQ_BUS_WIDTH_32 | 1 << APB_SEQ_WRAP_SHIFT; +} + +static void handle_oneshot_dma(struct tegra_dma_channel *ch) +{ + struct tegra_dma_req *req; + + spin_lock(&ch->lock); + if (list_empty(&ch->list)) { + spin_unlock(&ch->lock); + return; + } + + req = list_entry(ch->list.next, typeof(*req), node); + if (req) { + int bytes_transferred; + + bytes_transferred = + (ch->csr & CSR_WCOUNT_MASK) >> CSR_WCOUNT_SHIFT; + bytes_transferred += 1; + bytes_transferred <<= 2; + + list_del(&req->node); + req->bytes_transferred = bytes_transferred; + req->status = TEGRA_DMA_REQ_SUCCESS; + + spin_unlock(&ch->lock); + /* Callback should be called without any lock */ + pr_debug("%s: transferred %d bytes\n", __func__, + req->bytes_transferred); + req->complete(req); + spin_lock(&ch->lock); + } + + if (!list_empty(&ch->list)) { + req = list_entry(ch->list.next, typeof(*req), node); + /* the complete function we just called may have enqueued + another req, in which case dma has already started */ + if (req->status != TEGRA_DMA_REQ_INFLIGHT) + tegra_dma_update_hw(ch, req); + } + spin_unlock(&ch->lock); +} + +static void handle_continuous_dma(struct tegra_dma_channel *ch) +{ + struct tegra_dma_req *req; + + spin_lock(&ch->lock); + if (list_empty(&ch->list)) { + spin_unlock(&ch->lock); + return; + } + + req = list_entry(ch->list.next, typeof(*req), node); + if (req) { + if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_EMPTY) { + /* Load the next request into the hardware, if available + * */ + if (!list_is_last(&req->node, &ch->list)) { + struct tegra_dma_req *next_req; + + next_req = list_entry(req->node.next, + typeof(*next_req), node); + tegra_dma_update_hw_partial(ch, next_req); + } + req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL; + req->status = TEGRA_DMA_REQ_SUCCESS; + /* DMA lock is NOT held when callback is called */ + spin_unlock(&ch->lock); + if (likely(req->threshold)) + req->threshold(req); + return; + + } else if (req->buffer_status == + TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) { + /* Callback when the buffer is completely full (i.e on + * the second interrupt */ + int bytes_transferred; + + bytes_transferred = + (ch->csr & CSR_WCOUNT_MASK) >> CSR_WCOUNT_SHIFT; + bytes_transferred += 1; + bytes_transferred <<= 3; + + req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL; + req->bytes_transferred = bytes_transferred; + req->status = TEGRA_DMA_REQ_SUCCESS; + list_del(&req->node); + + /* DMA lock is NOT held when callbak is called */ + spin_unlock(&ch->lock); + req->complete(req); + return; + + } else { + BUG(); + } + } + spin_unlock(&ch->lock); +} + +static irqreturn_t dma_isr(int irq, void *data) +{ + struct tegra_dma_channel *ch = data; + unsigned long status; + + status = readl(ch->addr + APB_DMA_CHAN_STA); + if (status & STA_ISE_EOC) + writel(status, ch->addr + APB_DMA_CHAN_STA); + else { + pr_warning("Got a spurious ISR for DMA channel %d\n", ch->id); + return IRQ_HANDLED; + } + return IRQ_WAKE_THREAD; +} + +static irqreturn_t dma_thread_fn(int irq, void *data) +{ + struct tegra_dma_channel *ch = data; + + if (ch->mode & TEGRA_DMA_MODE_ONESHOT) + handle_oneshot_dma(ch); + else + handle_continuous_dma(ch); + + + return IRQ_HANDLED; +} + +int __init tegra_dma_init(void) +{ + int ret = 0; + int i; + unsigned int irq; + void __iomem *addr; + + addr = IO_ADDRESS(TEGRA_APB_DMA_BASE); + writel(GEN_ENABLE, addr + APB_DMA_GEN); + writel(0, addr + APB_DMA_CNTRL); + writel(0xFFFFFFFFul >> (31 - TEGRA_SYSTEM_DMA_CH_MAX), + addr + APB_DMA_IRQ_MASK_SET); + + memset(channel_usage, 0, sizeof(channel_usage)); + memset(dma_channels, 0, sizeof(dma_channels)); + + /* Reserve all the channels we are not supposed to touch */ + for (i = 0; i < TEGRA_SYSTEM_DMA_CH_MIN; i++) + __set_bit(i, channel_usage); + + for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) { + struct tegra_dma_channel *ch = &dma_channels[i]; + + __clear_bit(i, channel_usage); + + ch->id = i; + snprintf(ch->name, TEGRA_DMA_NAME_SIZE, "dma_channel_%d", i); + + ch->addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE + + TEGRA_APB_DMA_CH0_SIZE * i); + + spin_lock_init(&ch->lock); + INIT_LIST_HEAD(&ch->list); + tegra_dma_init_hw(ch); + + irq = INT_APB_DMA_CH0 + i; + ret = request_threaded_irq(irq, dma_isr, dma_thread_fn, 0, + dma_channels[i].name, ch); + if (ret) { + pr_err("Failed to register IRQ %d for DMA %d\n", + irq, i); + goto fail; + } + ch->irq = irq; + } + /* mark the shared channel allocated */ + __set_bit(TEGRA_SYSTEM_DMA_CH_MIN, channel_usage); + + for (i = TEGRA_SYSTEM_DMA_CH_MAX+1; i < NV_DMA_MAX_CHANNELS; i++) + __set_bit(i, channel_usage); + + return ret; +fail: + writel(0, addr + APB_DMA_GEN); + for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) { + struct tegra_dma_channel *ch = &dma_channels[i]; + if (ch->irq) + free_irq(ch->irq, ch); + } + return ret; +} + +#ifdef CONFIG_PM +static u32 apb_dma[5*TEGRA_SYSTEM_DMA_CH_NR + 3]; + +void tegra_dma_suspend(void) +{ + void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE); + u32 *ctx = apb_dma; + int i; + + *ctx++ = readl(addr + APB_DMA_GEN); + *ctx++ = readl(addr + APB_DMA_CNTRL); + *ctx++ = readl(addr + APB_DMA_IRQ_MASK); + + for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) { + addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE + + TEGRA_APB_DMA_CH0_SIZE * i); + + *ctx++ = readl(addr + APB_DMA_CHAN_CSR); + *ctx++ = readl(addr + APB_DMA_CHAN_AHB_PTR); + *ctx++ = readl(addr + APB_DMA_CHAN_AHB_SEQ); + *ctx++ = readl(addr + APB_DMA_CHAN_APB_PTR); + *ctx++ = readl(addr + APB_DMA_CHAN_APB_SEQ); + } +} + +void tegra_dma_resume(void) +{ + void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE); + u32 *ctx = apb_dma; + int i; + + writel(*ctx++, addr + APB_DMA_GEN); + writel(*ctx++, addr + APB_DMA_CNTRL); + writel(*ctx++, addr + APB_DMA_IRQ_MASK); + + for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) { + addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE + + TEGRA_APB_DMA_CH0_SIZE * i); + + writel(*ctx++, addr + APB_DMA_CHAN_CSR); + writel(*ctx++, addr + APB_DMA_CHAN_AHB_PTR); + writel(*ctx++, addr + APB_DMA_CHAN_AHB_SEQ); + writel(*ctx++, addr + APB_DMA_CHAN_APB_PTR); + writel(*ctx++, addr + APB_DMA_CHAN_APB_SEQ); + } +} + +#endif diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c new file mode 100644 index 000000000000..1fa26d9a1a68 --- /dev/null +++ b/arch/arm/mach-tegra/fuse.c @@ -0,0 +1,84 @@ +/* + * arch/arm/mach-tegra/fuse.c + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross <ccross@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/io.h> + +#include <mach/iomap.h> + +#include "fuse.h" + +#define FUSE_UID_LOW 0x108 +#define FUSE_UID_HIGH 0x10c +#define FUSE_SKU_INFO 0x110 +#define FUSE_SPARE_BIT 0x200 + +static inline u32 fuse_readl(unsigned long offset) +{ + return readl(IO_TO_VIRT(TEGRA_FUSE_BASE + offset)); +} + +static inline void fuse_writel(u32 value, unsigned long offset) +{ + writel(value, IO_TO_VIRT(TEGRA_FUSE_BASE + offset)); +} + +void tegra_init_fuse(void) +{ + u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); + reg |= 1 << 28; + writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48)); + + pr_info("Tegra SKU: %d CPU Process: %d Core Process: %d\n", + tegra_sku_id(), tegra_cpu_process_id(), + tegra_core_process_id()); +} + +unsigned long long tegra_chip_uid(void) +{ + unsigned long long lo, hi; + + lo = fuse_readl(FUSE_UID_LOW); + hi = fuse_readl(FUSE_UID_HIGH); + return (hi << 32ull) | lo; +} + +int tegra_sku_id(void) +{ + int sku_id; + u32 reg = fuse_readl(FUSE_SKU_INFO); + sku_id = reg & 0xFF; + return sku_id; +} + +int tegra_cpu_process_id(void) +{ + int cpu_process_id; + u32 reg = fuse_readl(FUSE_SPARE_BIT); + cpu_process_id = (reg >> 6) & 3; + return cpu_process_id; +} + +int tegra_core_process_id(void) +{ + int core_process_id; + u32 reg = fuse_readl(FUSE_SPARE_BIT); + core_process_id = (reg >> 12) & 3; + return core_process_id; +} diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h new file mode 100644 index 000000000000..584b2e27dbda --- /dev/null +++ b/arch/arm/mach-tegra/fuse.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-tegra/fuse.c + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross <ccross@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +unsigned long long tegra_chip_uid(void); +int tegra_sku_id(void); +int tegra_cpu_process_id(void); +int tegra_core_process_id(void); +void tegra_init_fuse(void); diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c index fe78fba25f3c..0775265e69f5 100644 --- a/arch/arm/mach-tegra/gpio.c +++ b/arch/arm/mach-tegra/gpio.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/gpio.h> @@ -60,6 +61,13 @@ struct tegra_gpio_bank { int bank; int irq; spinlock_t lvl_lock[4]; +#ifdef CONFIG_PM + u32 cnf[4]; + u32 out[4]; + u32 oe[4]; + u32 int_enb[4]; + u32 int_lvl[4]; +#endif }; @@ -131,7 +139,7 @@ static struct gpio_chip tegra_gpio_chip = { .direction_output = tegra_gpio_direction_output, .set = tegra_gpio_set, .base = 0, - .ngpio = ARCH_NR_GPIOS, + .ngpio = TEGRA_NR_GPIOS, }; static void tegra_gpio_irq_ack(unsigned int irq) @@ -244,6 +252,76 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) } +#ifdef CONFIG_PM +void tegra_gpio_resume(void) +{ + unsigned long flags; + int b, p, i; + + local_irq_save(flags); + + for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { + struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; + + for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { + unsigned int gpio = (b<<5) | (p<<3); + __raw_writel(bank->cnf[p], GPIO_CNF(gpio)); + __raw_writel(bank->out[p], GPIO_OUT(gpio)); + __raw_writel(bank->oe[p], GPIO_OE(gpio)); + __raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio)); + __raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio)); + } + } + + local_irq_restore(flags); + + for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { + struct irq_desc *desc = irq_to_desc(i); + if (!desc || (desc->status & IRQ_WAKEUP)) + continue; + enable_irq(i); + } +} + +void tegra_gpio_suspend(void) +{ + unsigned long flags; + int b, p, i; + + for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { + struct irq_desc *desc = irq_to_desc(i); + if (!desc) + continue; + if (desc->status & IRQ_WAKEUP) { + int gpio = i - INT_GPIO_BASE; + pr_debug("gpio %d.%d is wakeup\n", gpio/8, gpio&7); + continue; + } + disable_irq(i); + } + + local_irq_save(flags); + for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { + struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; + + for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { + unsigned int gpio = (b<<5) | (p<<3); + bank->cnf[p] = __raw_readl(GPIO_CNF(gpio)); + bank->out[p] = __raw_readl(GPIO_OUT(gpio)); + bank->oe[p] = __raw_readl(GPIO_OE(gpio)); + bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio)); + bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio)); + } + } + local_irq_restore(flags); +} + +static int tegra_gpio_wake_enable(unsigned int irq, unsigned int enable) +{ + struct tegra_gpio_bank *bank = get_irq_chip_data(irq); + return set_irq_wake(bank->irq, enable); +} +#endif static struct irq_chip tegra_gpio_irq_chip = { .name = "GPIO", @@ -251,6 +329,9 @@ static struct irq_chip tegra_gpio_irq_chip = { .mask = tegra_gpio_irq_mask, .unmask = tegra_gpio_irq_unmask, .set_type = tegra_gpio_irq_set_type, +#ifdef CONFIG_PM + .set_wake = tegra_gpio_wake_enable, +#endif }; @@ -274,7 +355,7 @@ static int __init tegra_gpio_init(void) gpiochip_add(&tegra_gpio_chip); - for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + ARCH_NR_GPIOS); i++) { + for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))]; lockdep_set_class(&irq_desc[i].lock, &gpio_lock_class); @@ -312,15 +393,16 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) for (i = 0; i < 7; i++) { for (j = 0; j < 4; j++) { int gpio = tegra_gpio_compose(i, j, 0); - seq_printf(s, "%d:%d %02x %02x %02x %02x %02x %02x %06x\n", - i, j, - __raw_readl(GPIO_CNF(gpio)), - __raw_readl(GPIO_OE(gpio)), - __raw_readl(GPIO_OUT(gpio)), - __raw_readl(GPIO_IN(gpio)), - __raw_readl(GPIO_INT_STA(gpio)), - __raw_readl(GPIO_INT_ENB(gpio)), - __raw_readl(GPIO_INT_LVL(gpio))); + seq_printf(s, + "%d:%d %02x %02x %02x %02x %02x %02x %06x\n", + i, j, + __raw_readl(GPIO_CNF(gpio)), + __raw_readl(GPIO_OE(gpio)), + __raw_readl(GPIO_OUT(gpio)), + __raw_readl(GPIO_IN(gpio)), + __raw_readl(GPIO_INT_STA(gpio)), + __raw_readl(GPIO_INT_ENB(gpio)), + __raw_readl(GPIO_INT_LVL(gpio))); } } return 0; diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index 2896f25ebfb5..d7723955dac7 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -23,4 +23,9 @@ void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); +int clk_enable_cansleep(struct clk *clk); +void clk_disable_cansleep(struct clk *clk); +int clk_set_rate_cansleep(struct clk *clk, unsigned long rate); +int clk_set_parent_cansleep(struct clk *clk, struct clk *parent); + #endif diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h new file mode 100644 index 000000000000..39011bd9a925 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -0,0 +1,155 @@ +/* + * arch/arm/mach-tegra/include/mach/dma.h + * + * Copyright (c) 2008-2009, NVIDIA Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __MACH_TEGRA_DMA_H +#define __MACH_TEGRA_DMA_H + +#include <linux/list.h> + +#if defined(CONFIG_TEGRA_SYSTEM_DMA) + +struct tegra_dma_req; +struct tegra_dma_channel; + +#define TEGRA_DMA_REQ_SEL_CNTR 0 +#define TEGRA_DMA_REQ_SEL_I2S_2 1 +#define TEGRA_DMA_REQ_SEL_I2S_1 2 +#define TEGRA_DMA_REQ_SEL_SPD_I 3 +#define TEGRA_DMA_REQ_SEL_UI_I 4 +#define TEGRA_DMA_REQ_SEL_MIPI 5 +#define TEGRA_DMA_REQ_SEL_I2S2_2 6 +#define TEGRA_DMA_REQ_SEL_I2S2_1 7 +#define TEGRA_DMA_REQ_SEL_UARTA 8 +#define TEGRA_DMA_REQ_SEL_UARTB 9 +#define TEGRA_DMA_REQ_SEL_UARTC 10 +#define TEGRA_DMA_REQ_SEL_SPI 11 +#define TEGRA_DMA_REQ_SEL_AC97 12 +#define TEGRA_DMA_REQ_SEL_ACMODEM 13 +#define TEGRA_DMA_REQ_SEL_SL4B 14 +#define TEGRA_DMA_REQ_SEL_SL2B1 15 +#define TEGRA_DMA_REQ_SEL_SL2B2 16 +#define TEGRA_DMA_REQ_SEL_SL2B3 17 +#define TEGRA_DMA_REQ_SEL_SL2B4 18 +#define TEGRA_DMA_REQ_SEL_UARTD 19 +#define TEGRA_DMA_REQ_SEL_UARTE 20 +#define TEGRA_DMA_REQ_SEL_I2C 21 +#define TEGRA_DMA_REQ_SEL_I2C2 22 +#define TEGRA_DMA_REQ_SEL_I2C3 23 +#define TEGRA_DMA_REQ_SEL_DVC_I2C 24 +#define TEGRA_DMA_REQ_SEL_OWR 25 +#define TEGRA_DMA_REQ_SEL_INVALID 31 + +enum tegra_dma_mode { + TEGRA_DMA_SHARED = 1, + TEGRA_DMA_MODE_CONTINOUS = 2, + TEGRA_DMA_MODE_ONESHOT = 4, +}; + +enum tegra_dma_req_error { + TEGRA_DMA_REQ_SUCCESS = 0, + TEGRA_DMA_REQ_ERROR_ABORTED, + TEGRA_DMA_REQ_INFLIGHT, +}; + +enum tegra_dma_req_buff_status { + TEGRA_DMA_REQ_BUF_STATUS_EMPTY = 0, + TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL, + TEGRA_DMA_REQ_BUF_STATUS_FULL, +}; + +struct tegra_dma_req { + struct list_head node; + unsigned int modid; + int instance; + + /* Called when the req is complete and from the DMA ISR context. + * When this is called the req structure is no longer queued by + * the DMA channel. + * + * State of the DMA depends on the number of req it has. If there are + * no DMA requests queued up, then it will STOP the DMA. It there are + * more requests in the DMA, then it will queue the next request. + */ + void (*complete)(struct tegra_dma_req *req); + + /* This is a called from the DMA ISR context when the DMA is still in + * progress and is actively filling same buffer. + * + * In case of continous mode receive, this threshold is 1/2 the buffer + * size. In other cases, this will not even be called as there is no + * hardware support for it. + * + * In the case of continous mode receive, if there is next req already + * queued, DMA programs the HW to use that req when this req is + * completed. If there is no "next req" queued, then DMA ISR doesn't do + * anything before calling this callback. + * + * This is mainly used by the cases, where the clients has queued + * only one req and want to get some sort of DMA threshold + * callback to program the next buffer. + * + */ + void (*threshold)(struct tegra_dma_req *req); + + /* 1 to copy to memory. + * 0 to copy from the memory to device FIFO */ + int to_memory; + + void *virt_addr; + + unsigned long source_addr; + unsigned long dest_addr; + unsigned long dest_wrap; + unsigned long source_wrap; + unsigned long source_bus_width; + unsigned long dest_bus_width; + unsigned long req_sel; + unsigned int size; + + /* Updated by the DMA driver on the conpletion of the request. */ + int bytes_transferred; + int status; + + /* DMA completion tracking information */ + int buffer_status; + + /* Client specific data */ + void *dev; +}; + +int tegra_dma_enqueue_req(struct tegra_dma_channel *ch, + struct tegra_dma_req *req); +int tegra_dma_dequeue_req(struct tegra_dma_channel *ch, + struct tegra_dma_req *req); +void tegra_dma_dequeue(struct tegra_dma_channel *ch); +void tegra_dma_flush(struct tegra_dma_channel *ch); + +bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch, + struct tegra_dma_req *req); +bool tegra_dma_is_empty(struct tegra_dma_channel *ch); + +struct tegra_dma_channel *tegra_dma_allocate_channel(int mode); +void tegra_dma_free_channel(struct tegra_dma_channel *ch); + +int __init tegra_dma_init(void); + +#endif + +#endif diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h index 540e822e50f7..e31f486d69a2 100644 --- a/arch/arm/mach-tegra/include/mach/gpio.h +++ b/arch/arm/mach-tegra/include/mach/gpio.h @@ -22,7 +22,7 @@ #include <mach/irqs.h> -#define ARCH_NR_GPIOS INT_GPIO_NR +#define TEGRA_NR_GPIOS INT_GPIO_NR #include <asm-generic/gpio.h> @@ -35,7 +35,7 @@ static inline int gpio_to_irq(unsigned int gpio) { - if (gpio < ARCH_NR_GPIOS) + if (gpio < TEGRA_NR_GPIOS) return INT_GPIO_BASE + gpio; return -EINVAL; } diff --git a/arch/arm/mach-tegra/include/mach/hardware.h b/arch/arm/mach-tegra/include/mach/hardware.h index 6014edf60d93..56e43b3a5b97 100644 --- a/arch/arm/mach-tegra/include/mach/hardware.h +++ b/arch/arm/mach-tegra/include/mach/hardware.h @@ -21,4 +21,8 @@ #ifndef __MACH_TEGRA_HARDWARE_H #define __MACH_TEGRA_HARDWARE_H +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0 +#define pcibios_assign_all_busses() 1 + #endif diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h index 35edfc32ffc9..f0981b1ac59e 100644 --- a/arch/arm/mach-tegra/include/mach/io.h +++ b/arch/arm/mach-tegra/include/mach/io.h @@ -21,7 +21,7 @@ #ifndef __MACH_TEGRA_IO_H #define __MACH_TEGRA_IO_H -#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_LIMIT 0xffff /* On TEGRA, many peripherals are very closely packed in * two 256MB io windows (that actually only use about 64KB @@ -33,6 +33,10 @@ * */ +#define IO_IRAM_PHYS 0x40000000 +#define IO_IRAM_VIRT 0xFE400000 +#define IO_IRAM_SIZE SZ_256K + #define IO_CPU_PHYS 0x50040000 #define IO_CPU_VIRT 0xFE000000 #define IO_CPU_SIZE SZ_16K @@ -55,6 +59,8 @@ IO_TO_VIRT_XLATE((n), IO_APB_PHYS, IO_APB_VIRT) : \ IO_TO_VIRT_BETWEEN((n), IO_CPU_PHYS, IO_CPU_SIZE) ? \ IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) : \ + IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ? \ + IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) : \ 0) #ifndef __ASSEMBLER__ @@ -67,10 +73,20 @@ void tegra_iounmap(volatile void __iomem *addr); #define IO_ADDRESS(n) ((void __iomem *) IO_TO_VIRT(n)) +#ifdef CONFIG_TEGRA_PCI +extern void __iomem *tegra_pcie_io_base; + +static inline void __iomem *__io(unsigned long addr) +{ + return tegra_pcie_io_base + (addr & IO_SPACE_LIMIT); +} +#else static inline void __iomem *__io(unsigned long addr) { return (void __iomem *)addr; } +#endif + #define __io(a) __io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h index 1741f7dd7a9b..44a4f4bcf91f 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/include/mach/iomap.h @@ -23,9 +23,15 @@ #include <asm/sizes.h> +#define TEGRA_IRAM_BASE 0x40000000 +#define TEGRA_IRAM_SIZE SZ_256K + #define TEGRA_ARM_PERIF_BASE 0x50040000 #define TEGRA_ARM_PERIF_SIZE SZ_8K +#define TEGRA_ARM_PL310_BASE 0x50043000 +#define TEGRA_ARM_PL310_SIZE SZ_4K + #define TEGRA_ARM_INT_DIST_BASE 0x50041000 #define TEGRA_ARM_INT_DIST_SIZE SZ_4K @@ -68,7 +74,22 @@ #define TEGRA_FLOW_CTRL_BASE 0x60007000 #define TEGRA_FLOW_CTRL_SIZE 20 -#define TEGRA_STATMON_BASE 0x6000C4000 +#define TEGRA_AHB_DMA_BASE 0x60008000 +#define TEGRA_AHB_DMA_SIZE SZ_4K + +#define TEGRA_AHB_DMA_CH0_BASE 0x60009000 +#define TEGRA_AHB_DMA_CH0_SIZE 32 + +#define TEGRA_APB_DMA_BASE 0x6000A000 +#define TEGRA_APB_DMA_SIZE SZ_4K + +#define TEGRA_APB_DMA_CH0_BASE 0x6000B000 +#define TEGRA_APB_DMA_CH0_SIZE 32 + +#define TEGRA_AHB_GIZMO_BASE 0x6000C004 +#define TEGRA_AHB_GIZMO_SIZE 0x10C + +#define TEGRA_STATMON_BASE 0x6000C400 #define TEGRA_STATMON_SIZE SZ_1K #define TEGRA_GPIO_BASE 0x6000D000 @@ -137,7 +158,7 @@ #define TEGRA_I2C3_BASE 0x7000C500 #define TEGRA_I2C3_SIZE SZ_256 -#define TEGRA_OWR_BASE 0x7000D000 +#define TEGRA_OWR_BASE 0x7000C600 #define TEGRA_OWR_SIZE 80 #define TEGRA_DVC_BASE 0x7000D000 @@ -182,12 +203,12 @@ #define TEGRA_USB_BASE 0xC5000000 #define TEGRA_USB_SIZE SZ_16K -#define TEGRA_USB1_BASE 0xC5004000 -#define TEGRA_USB1_SIZE SZ_16K - -#define TEGRA_USB2_BASE 0xC5008000 +#define TEGRA_USB2_BASE 0xC5004000 #define TEGRA_USB2_SIZE SZ_16K +#define TEGRA_USB3_BASE 0xC5008000 +#define TEGRA_USB3_SIZE SZ_16K + #define TEGRA_SDMMC1_BASE 0xC8000000 #define TEGRA_SDMMC1_SIZE SZ_512 diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h index 20f640edaa0d..71bbf3422953 100644 --- a/arch/arm/mach-tegra/include/mach/irqs.h +++ b/arch/arm/mach-tegra/include/mach/irqs.h @@ -25,6 +25,7 @@ #define IRQ_LOCALTIMER 29 +#ifdef CONFIG_ARCH_TEGRA_2x_SOC /* Primary Interrupt Controller */ #define INT_PRI_BASE (INT_GIC_BASE + 32) #define INT_TMR1 (INT_PRI_BASE + 0) @@ -169,5 +170,6 @@ #define INT_GPIO_NR (28 * 8) #define NR_IRQS (INT_GPIO_BASE + INT_GPIO_NR) +#endif #endif diff --git a/arch/arm/mach-tegra/include/mach/legacy_irq.h b/arch/arm/mach-tegra/include/mach/legacy_irq.h new file mode 100644 index 000000000000..db1eb3dd04c8 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/legacy_irq.h @@ -0,0 +1,31 @@ +/* + * arch/arm/mach-tegra/include/mach/legacy_irq.h + * + * Copyright (C) 2010 Google, Inc. + * Author: Colin Cross <ccross@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _ARCH_ARM_MACH_TEGRA_LEGARY_IRQ_H +#define _ARCH_ARM_MACH_TEGRA_LEGARY_IRQ_H + +void tegra_legacy_mask_irq(unsigned int irq); +void tegra_legacy_unmask_irq(unsigned int irq); +void tegra_legacy_select_fiq(unsigned int irq, bool fiq); +void tegra_legacy_force_irq_set(unsigned int irq); +void tegra_legacy_force_irq_clr(unsigned int irq); +int tegra_legacy_force_irq_status(unsigned int irq); +void tegra_legacy_select_fiq(unsigned int irq, bool fiq); +unsigned long tegra_legacy_vfiq(int nr); +unsigned long tegra_legacy_class(int nr); + +#endif diff --git a/arch/arm/mach-tegra/include/mach/pinmux-t2.h b/arch/arm/mach-tegra/include/mach/pinmux-t2.h new file mode 100644 index 000000000000..e5b9d740f973 --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/pinmux-t2.h @@ -0,0 +1,174 @@ +/* + * linux/arch/arm/mach-tegra/include/mach/pinmux-t2.h + * + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_TEGRA_PINMUX_T2_H +#define __MACH_TEGRA_PINMUX_T2_H + +enum tegra_pingroup { + TEGRA_PINGROUP_ATA = 0, + TEGRA_PINGROUP_ATB, + TEGRA_PINGROUP_ATC, + TEGRA_PINGROUP_ATD, + TEGRA_PINGROUP_ATE, + TEGRA_PINGROUP_CDEV1, + TEGRA_PINGROUP_CDEV2, + TEGRA_PINGROUP_CRTP, + TEGRA_PINGROUP_CSUS, + TEGRA_PINGROUP_DAP1, + TEGRA_PINGROUP_DAP2, + TEGRA_PINGROUP_DAP3, + TEGRA_PINGROUP_DAP4, + TEGRA_PINGROUP_DDC, + TEGRA_PINGROUP_DTA, + TEGRA_PINGROUP_DTB, + TEGRA_PINGROUP_DTC, + TEGRA_PINGROUP_DTD, + TEGRA_PINGROUP_DTE, + TEGRA_PINGROUP_DTF, + TEGRA_PINGROUP_GMA, + TEGRA_PINGROUP_GMB, + TEGRA_PINGROUP_GMC, + TEGRA_PINGROUP_GMD, + TEGRA_PINGROUP_GME, + TEGRA_PINGROUP_GPU, + TEGRA_PINGROUP_GPU7, + TEGRA_PINGROUP_GPV, + TEGRA_PINGROUP_HDINT, + TEGRA_PINGROUP_I2CP, + TEGRA_PINGROUP_IRRX, + TEGRA_PINGROUP_IRTX, + TEGRA_PINGROUP_KBCA, + TEGRA_PINGROUP_KBCB, + TEGRA_PINGROUP_KBCC, + TEGRA_PINGROUP_KBCD, + TEGRA_PINGROUP_KBCE, + TEGRA_PINGROUP_KBCF, + TEGRA_PINGROUP_LCSN, + TEGRA_PINGROUP_LD0, + TEGRA_PINGROUP_LD1, + TEGRA_PINGROUP_LD10, + TEGRA_PINGROUP_LD11, + TEGRA_PINGROUP_LD12, + TEGRA_PINGROUP_LD13, + TEGRA_PINGROUP_LD14, + TEGRA_PINGROUP_LD15, + TEGRA_PINGROUP_LD16, + TEGRA_PINGROUP_LD17, + TEGRA_PINGROUP_LD2, + TEGRA_PINGROUP_LD3, + TEGRA_PINGROUP_LD4, + TEGRA_PINGROUP_LD5, + TEGRA_PINGROUP_LD6, + TEGRA_PINGROUP_LD7, + TEGRA_PINGROUP_LD8, + TEGRA_PINGROUP_LD9, + TEGRA_PINGROUP_LDC, + TEGRA_PINGROUP_LDI, + TEGRA_PINGROUP_LHP0, + TEGRA_PINGROUP_LHP1, + TEGRA_PINGROUP_LHP2, + TEGRA_PINGROUP_LHS, + TEGRA_PINGROUP_LM0, + TEGRA_PINGROUP_LM1, + TEGRA_PINGROUP_LPP, + TEGRA_PINGROUP_LPW0, + TEGRA_PINGROUP_LPW1, + TEGRA_PINGROUP_LPW2, + TEGRA_PINGROUP_LSC0, + TEGRA_PINGROUP_LSC1, + TEGRA_PINGROUP_LSCK, + TEGRA_PINGROUP_LSDA, + TEGRA_PINGROUP_LSDI, + TEGRA_PINGROUP_LSPI, + TEGRA_PINGROUP_LVP0, + TEGRA_PINGROUP_LVP1, + TEGRA_PINGROUP_LVS, + TEGRA_PINGROUP_OWC, + TEGRA_PINGROUP_PMC, + TEGRA_PINGROUP_PTA, + TEGRA_PINGROUP_RM, + TEGRA_PINGROUP_SDB, + TEGRA_PINGROUP_SDC, + TEGRA_PINGROUP_SDD, + TEGRA_PINGROUP_SDIO1, + TEGRA_PINGROUP_SLXA, + TEGRA_PINGROUP_SLXC, + TEGRA_PINGROUP_SLXD, + TEGRA_PINGROUP_SLXK, + TEGRA_PINGROUP_SPDI, + TEGRA_PINGROUP_SPDO, + TEGRA_PINGROUP_SPIA, + TEGRA_PINGROUP_SPIB, + TEGRA_PINGROUP_SPIC, + TEGRA_PINGROUP_SPID, + TEGRA_PINGROUP_SPIE, + TEGRA_PINGROUP_SPIF, + TEGRA_PINGROUP_SPIG, + TEGRA_PINGROUP_SPIH, + TEGRA_PINGROUP_UAA, + TEGRA_PINGROUP_UAB, + TEGRA_PINGROUP_UAC, + TEGRA_PINGROUP_UAD, + TEGRA_PINGROUP_UCA, + TEGRA_PINGROUP_UCB, + TEGRA_PINGROUP_UDA, + /* these pin groups only have pullup and pull down control */ + TEGRA_PINGROUP_CK32, + TEGRA_PINGROUP_DDRC, + TEGRA_PINGROUP_PMCA, + TEGRA_PINGROUP_PMCB, + TEGRA_PINGROUP_PMCC, + TEGRA_PINGROUP_PMCD, + TEGRA_PINGROUP_PMCE, + TEGRA_PINGROUP_XM2C, + TEGRA_PINGROUP_XM2D, + TEGRA_MAX_PINGROUP, +}; + +enum tegra_drive_pingroup { + TEGRA_DRIVE_PINGROUP_AO1 = 0, + TEGRA_DRIVE_PINGROUP_AO2, + TEGRA_DRIVE_PINGROUP_AT1, + TEGRA_DRIVE_PINGROUP_AT2, + TEGRA_DRIVE_PINGROUP_CDEV1, + TEGRA_DRIVE_PINGROUP_CDEV2, + TEGRA_DRIVE_PINGROUP_CSUS, + TEGRA_DRIVE_PINGROUP_DAP1, + TEGRA_DRIVE_PINGROUP_DAP2, + TEGRA_DRIVE_PINGROUP_DAP3, + TEGRA_DRIVE_PINGROUP_DAP4, + TEGRA_DRIVE_PINGROUP_DBG, + TEGRA_DRIVE_PINGROUP_LCD1, + TEGRA_DRIVE_PINGROUP_LCD2, + TEGRA_DRIVE_PINGROUP_SDMMC2, + TEGRA_DRIVE_PINGROUP_SDMMC3, + TEGRA_DRIVE_PINGROUP_SPI, + TEGRA_DRIVE_PINGROUP_UAA, + TEGRA_DRIVE_PINGROUP_UAB, + TEGRA_DRIVE_PINGROUP_UART2, + TEGRA_DRIVE_PINGROUP_UART3, + TEGRA_DRIVE_PINGROUP_VI1, + TEGRA_DRIVE_PINGROUP_VI2, + TEGRA_DRIVE_PINGROUP_XM2A, + TEGRA_DRIVE_PINGROUP_XM2C, + TEGRA_DRIVE_PINGROUP_XM2D, + TEGRA_DRIVE_PINGROUP_XM2CLK, + TEGRA_DRIVE_PINGROUP_MEMCOMP, + TEGRA_MAX_DRIVE_PINGROUP, +}; + +#endif + diff --git a/arch/arm/mach-tegra/include/mach/pinmux.h b/arch/arm/mach-tegra/include/mach/pinmux.h index 41c8ce5b7c27..defd8775defa 100644 --- a/arch/arm/mach-tegra/include/mach/pinmux.h +++ b/arch/arm/mach-tegra/include/mach/pinmux.h @@ -17,126 +17,11 @@ #ifndef __MACH_TEGRA_PINMUX_H #define __MACH_TEGRA_PINMUX_H -enum tegra_pingroup { - TEGRA_PINGROUP_ATA = 0, - TEGRA_PINGROUP_ATB, - TEGRA_PINGROUP_ATC, - TEGRA_PINGROUP_ATD, - TEGRA_PINGROUP_ATE, - TEGRA_PINGROUP_CDEV1, - TEGRA_PINGROUP_CDEV2, - TEGRA_PINGROUP_CRTP, - TEGRA_PINGROUP_CSUS, - TEGRA_PINGROUP_DAP1, - TEGRA_PINGROUP_DAP2, - TEGRA_PINGROUP_DAP3, - TEGRA_PINGROUP_DAP4, - TEGRA_PINGROUP_DDC, - TEGRA_PINGROUP_DTA, - TEGRA_PINGROUP_DTB, - TEGRA_PINGROUP_DTC, - TEGRA_PINGROUP_DTD, - TEGRA_PINGROUP_DTE, - TEGRA_PINGROUP_DTF, - TEGRA_PINGROUP_GMA, - TEGRA_PINGROUP_GMB, - TEGRA_PINGROUP_GMC, - TEGRA_PINGROUP_GMD, - TEGRA_PINGROUP_GME, - TEGRA_PINGROUP_GPU, - TEGRA_PINGROUP_GPU7, - TEGRA_PINGROUP_GPV, - TEGRA_PINGROUP_HDINT, - TEGRA_PINGROUP_I2CP, - TEGRA_PINGROUP_IRRX, - TEGRA_PINGROUP_IRTX, - TEGRA_PINGROUP_KBCA, - TEGRA_PINGROUP_KBCB, - TEGRA_PINGROUP_KBCC, - TEGRA_PINGROUP_KBCD, - TEGRA_PINGROUP_KBCE, - TEGRA_PINGROUP_KBCF, - TEGRA_PINGROUP_LCSN, - TEGRA_PINGROUP_LD0, - TEGRA_PINGROUP_LD1, - TEGRA_PINGROUP_LD10, - TEGRA_PINGROUP_LD11, - TEGRA_PINGROUP_LD12, - TEGRA_PINGROUP_LD13, - TEGRA_PINGROUP_LD14, - TEGRA_PINGROUP_LD15, - TEGRA_PINGROUP_LD16, - TEGRA_PINGROUP_LD17, - TEGRA_PINGROUP_LD2, - TEGRA_PINGROUP_LD3, - TEGRA_PINGROUP_LD4, - TEGRA_PINGROUP_LD5, - TEGRA_PINGROUP_LD6, - TEGRA_PINGROUP_LD7, - TEGRA_PINGROUP_LD8, - TEGRA_PINGROUP_LD9, - TEGRA_PINGROUP_LDC, - TEGRA_PINGROUP_LDI, - TEGRA_PINGROUP_LHP0, - TEGRA_PINGROUP_LHP1, - TEGRA_PINGROUP_LHP2, - TEGRA_PINGROUP_LHS, - TEGRA_PINGROUP_LM0, - TEGRA_PINGROUP_LM1, - TEGRA_PINGROUP_LPP, - TEGRA_PINGROUP_LPW0, - TEGRA_PINGROUP_LPW1, - TEGRA_PINGROUP_LPW2, - TEGRA_PINGROUP_LSC0, - TEGRA_PINGROUP_LSC1, - TEGRA_PINGROUP_LSCK, - TEGRA_PINGROUP_LSDA, - TEGRA_PINGROUP_LSDI, - TEGRA_PINGROUP_LSPI, - TEGRA_PINGROUP_LVP0, - TEGRA_PINGROUP_LVP1, - TEGRA_PINGROUP_LVS, - TEGRA_PINGROUP_OWC, - TEGRA_PINGROUP_PMC, - TEGRA_PINGROUP_PTA, - TEGRA_PINGROUP_RM, - TEGRA_PINGROUP_SDB, - TEGRA_PINGROUP_SDC, - TEGRA_PINGROUP_SDD, - TEGRA_PINGROUP_SDIO1, - TEGRA_PINGROUP_SLXA, - TEGRA_PINGROUP_SLXC, - TEGRA_PINGROUP_SLXD, - TEGRA_PINGROUP_SLXK, - TEGRA_PINGROUP_SPDI, - TEGRA_PINGROUP_SPDO, - TEGRA_PINGROUP_SPIA, - TEGRA_PINGROUP_SPIB, - TEGRA_PINGROUP_SPIC, - TEGRA_PINGROUP_SPID, - TEGRA_PINGROUP_SPIE, - TEGRA_PINGROUP_SPIF, - TEGRA_PINGROUP_SPIG, - TEGRA_PINGROUP_SPIH, - TEGRA_PINGROUP_UAA, - TEGRA_PINGROUP_UAB, - TEGRA_PINGROUP_UAC, - TEGRA_PINGROUP_UAD, - TEGRA_PINGROUP_UCA, - TEGRA_PINGROUP_UCB, - TEGRA_PINGROUP_UDA, - /* these pin groups only have pullup and pull down control */ - TEGRA_PINGROUP_CK32, - TEGRA_PINGROUP_DDRC, - TEGRA_PINGROUP_PMCA, - TEGRA_PINGROUP_PMCB, - TEGRA_PINGROUP_PMCC, - TEGRA_PINGROUP_PMCD, - TEGRA_PINGROUP_PMCE, - TEGRA_PINGROUP_XM2C, - TEGRA_PINGROUP_XM2D, - TEGRA_MAX_PINGROUP, -}; +#if defined(CONFIG_ARCH_TEGRA_2x_SOC) +#include "pinmux-t2.h" +#else +#error "Undefined Tegra architecture" +#endif enum tegra_mux_func { TEGRA_MUX_RSVD = 0x8000, @@ -205,6 +90,7 @@ enum tegra_mux_func { TEGRA_MUX_VI, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_MUX_XIO, + TEGRA_MUX_SAFE, TEGRA_MAX_MUX, }; @@ -219,6 +105,18 @@ enum tegra_tristate { TEGRA_TRI_TRISTATE = 1, }; +enum tegra_vddio { + TEGRA_VDDIO_BB = 0, + TEGRA_VDDIO_LCD, + TEGRA_VDDIO_VI, + TEGRA_VDDIO_UART, + TEGRA_VDDIO_DDR, + TEGRA_VDDIO_NAND, + TEGRA_VDDIO_SYS, + TEGRA_VDDIO_AUDIO, + TEGRA_VDDIO_SD, +}; + struct tegra_pingroup_config { enum tegra_pingroup pingroup; enum tegra_mux_func func; @@ -270,38 +168,6 @@ enum tegra_pull_strength { TEGRA_MAX_PULL, }; -enum tegra_drive_pingroup { - TEGRA_DRIVE_PINGROUP_AO1 = 0, - TEGRA_DRIVE_PINGROUP_AO2, - TEGRA_DRIVE_PINGROUP_AT1, - TEGRA_DRIVE_PINGROUP_AT2, - TEGRA_DRIVE_PINGROUP_CDEV1, - TEGRA_DRIVE_PINGROUP_CDEV2, - TEGRA_DRIVE_PINGROUP_CSUS, - TEGRA_DRIVE_PINGROUP_DAP1, - TEGRA_DRIVE_PINGROUP_DAP2, - TEGRA_DRIVE_PINGROUP_DAP3, - TEGRA_DRIVE_PINGROUP_DAP4, - TEGRA_DRIVE_PINGROUP_DBG, - TEGRA_DRIVE_PINGROUP_LCD1, - TEGRA_DRIVE_PINGROUP_LCD2, - TEGRA_DRIVE_PINGROUP_SDMMC2, - TEGRA_DRIVE_PINGROUP_SDMMC3, - TEGRA_DRIVE_PINGROUP_SPI, - TEGRA_DRIVE_PINGROUP_UAA, - TEGRA_DRIVE_PINGROUP_UAB, - TEGRA_DRIVE_PINGROUP_UART2, - TEGRA_DRIVE_PINGROUP_UART3, - TEGRA_DRIVE_PINGROUP_VI1, - TEGRA_DRIVE_PINGROUP_VI2, - TEGRA_DRIVE_PINGROUP_XM2A, - TEGRA_DRIVE_PINGROUP_XM2C, - TEGRA_DRIVE_PINGROUP_XM2D, - TEGRA_DRIVE_PINGROUP_XM2CLK, - TEGRA_DRIVE_PINGROUP_MEMCOMP, - TEGRA_MAX_DRIVE_PINGROUP, -}; - enum tegra_drive { TEGRA_DRIVE_DIV_8 = 0, TEGRA_DRIVE_DIV_4, @@ -331,18 +197,44 @@ struct tegra_drive_pingroup_config { enum tegra_slew slew_falling; }; -int tegra_pinmux_set_func(enum tegra_pingroup pg, enum tegra_mux_func func); -int tegra_pinmux_set_tristate(enum tegra_pingroup pg, enum tegra_tristate tristate); -int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg, enum tegra_pullupdown pupd); +struct tegra_drive_pingroup_desc { + const char *name; + s16 reg; +}; + +struct tegra_pingroup_desc { + const char *name; + int funcs[4]; + int func_safe; + int vddio; + s16 tri_reg; /* offset into the TRISTATE_REG_* register bank */ + s16 mux_reg; /* offset into the PIN_MUX_CTL_* register bank */ + s16 pupd_reg; /* offset into the PULL_UPDOWN_REG_* register bank */ + s8 tri_bit; /* offset into the TRISTATE_REG_* register bit */ + s8 mux_bit; /* offset into the PIN_MUX_CTL_* register bit */ + s8 pupd_bit; /* offset into the PULL_UPDOWN_REG_* register bit */ +}; + +extern const struct tegra_pingroup_desc tegra_soc_pingroups[]; +extern const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[]; -void tegra_pinmux_config_pingroup(enum tegra_pingroup pingroup, - enum tegra_mux_func func, enum tegra_pullupdown pupd, +int tegra_pinmux_set_tristate(enum tegra_pingroup pg, enum tegra_tristate tristate); +int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg, + enum tegra_pullupdown pupd); -void tegra_pinmux_config_table(struct tegra_pingroup_config *config, int len); +void tegra_pinmux_config_table(const struct tegra_pingroup_config *config, + int len); void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config, int len); - +void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *config, + int len); +void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config, + int len); +void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *config, + int len, enum tegra_tristate tristate); +void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config, + int len, enum tegra_pullupdown pupd); #endif diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h index 8b42dab79a70..e4a34a35a544 100644 --- a/arch/arm/mach-tegra/include/mach/smp.h +++ b/arch/arm/mach-tegra/include/mach/smp.h @@ -1,16 +1,8 @@ #ifndef ASMARM_ARCH_SMP_H #define ASMARM_ARCH_SMP_H - #include <asm/hardware/gic.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) +#include <asm/smp_mpidr.h> /* * We use IRQ1 as the IPI diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c index 9fe2c5c683d4..31848a9592f8 100644 --- a/arch/arm/mach-tegra/io.c +++ b/arch/arm/mach-tegra/io.c @@ -49,6 +49,12 @@ static struct map_desc tegra_io_desc[] __initdata = { .length = IO_CPU_SIZE, .type = MT_DEVICE, }, + { + .virtual = IO_IRAM_VIRT, + .pfn = __phys_to_pfn(IO_IRAM_PHYS), + .length = IO_IRAM_SIZE, + .type = MT_DEVICE, + }, }; void __init tegra_map_common_io(void) diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 1fdbe708d43d..50a8dfb9a0cf 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -4,6 +4,8 @@ * Author: * Colin Cross <ccross@google.com> * + * Copyright (C) 2010, NVIDIA Corporation + * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. @@ -27,8 +29,143 @@ #include "board.h" +#define INT_SYS_NR (INT_GPIO_BASE - INT_PRI_BASE) +#define INT_SYS_SZ (INT_SEC_BASE - INT_PRI_BASE) +#define PPI_NR ((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ) + +#define APBDMA_IRQ_STA_CPU 0x14 +#define APBDMA_IRQ_MASK_SET 0x20 +#define APBDMA_IRQ_MASK_CLR 0x24 + +#define ICTLR_CPU_IER 0x20 +#define ICTLR_CPU_IER_SET 0x24 +#define ICTLR_CPU_IER_CLR 0x28 +#define ICTLR_CPU_IEP_CLASS 0x2c +#define ICTLR_COP_IER 0x30 +#define ICTLR_COP_IER_SET 0x34 +#define ICTLR_COP_IER_CLR 0x38 +#define ICTLR_COP_IEP_CLASS 0x3c + +static void (*gic_mask_irq)(unsigned int irq); +static void (*gic_unmask_irq)(unsigned int irq); + +#define irq_to_ictlr(irq) (((irq)-32) >> 5) +static void __iomem *tegra_ictlr_base = IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE); +#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr)*0x100) + +static void tegra_mask(unsigned int irq) +{ + void __iomem *addr = ictlr_to_virt(irq_to_ictlr(irq)); + gic_mask_irq(irq); + writel(1<<(irq&31), addr+ICTLR_CPU_IER_CLR); +} + +static void tegra_unmask(unsigned int irq) +{ + void __iomem *addr = ictlr_to_virt(irq_to_ictlr(irq)); + gic_unmask_irq(irq); + writel(1<<(irq&31), addr+ICTLR_CPU_IER_SET); +} + +#ifdef CONFIG_PM + +static int tegra_set_wake(unsigned int irq, unsigned int on) +{ + return 0; +} +#endif + +static struct irq_chip tegra_irq = { + .name = "PPI", + .mask = tegra_mask, + .unmask = tegra_unmask, +#ifdef CONFIG_PM + .set_wake = tegra_set_wake, +#endif +}; + void __init tegra_init_irq(void) { + struct irq_chip *gic; + unsigned int i; + + for (i = 0; i < PPI_NR; i++) { + writel(~0, ictlr_to_virt(i) + ICTLR_CPU_IER_CLR); + writel(0, ictlr_to_virt(i) + ICTLR_CPU_IEP_CLASS); + } + gic_dist_init(0, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), 29); gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); + + gic = get_irq_chip(29); + gic_unmask_irq = gic->unmask; + gic_mask_irq = gic->mask; + tegra_irq.ack = gic->ack; +#ifdef CONFIG_SMP + tegra_irq.set_affinity = gic->set_affinity; +#endif + + for (i = INT_PRI_BASE; i < INT_GPIO_BASE; i++) { + set_irq_chip(i, &tegra_irq); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } +} + +#ifdef CONFIG_PM +static u32 cop_ier[PPI_NR]; +static u32 cpu_ier[PPI_NR]; +static u32 cpu_iep[PPI_NR]; + +void tegra_irq_suspend(void) +{ + unsigned long flags; + int i; + + for (i = INT_PRI_BASE; i < INT_GPIO_BASE; i++) { + struct irq_desc *desc = irq_to_desc(i); + if (!desc) + continue; + if (desc->status & IRQ_WAKEUP) { + pr_debug("irq %d is wakeup\n", i); + continue; + } + disable_irq(i); + } + + local_irq_save(flags); + for (i = 0; i < PPI_NR; i++) { + void __iomem *ictlr = ictlr_to_virt(i); + cpu_ier[i] = readl(ictlr + ICTLR_CPU_IER); + cpu_iep[i] = readl(ictlr + ICTLR_CPU_IEP_CLASS); + cop_ier[i] = readl(ictlr + ICTLR_COP_IER); + writel(~0, ictlr + ICTLR_COP_IER_CLR); + } + local_irq_restore(flags); +} + +void tegra_irq_resume(void) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < PPI_NR; i++) { + void __iomem *ictlr = ictlr_to_virt(i); + writel(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS); + writel(~0ul, ictlr + ICTLR_CPU_IER_CLR); + writel(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET); + writel(0, ictlr + ICTLR_COP_IEP_CLASS); + writel(~0ul, ictlr + ICTLR_COP_IER_CLR); + writel(cop_ier[i], ictlr + ICTLR_COP_IER_SET); + } + local_irq_restore(flags); + + for (i = INT_PRI_BASE; i < INT_GPIO_BASE; i++) { + struct irq_desc *desc = irq_to_desc(i); + if (!desc || (desc->status & IRQ_WAKEUP)) + continue; + enable_irq(i); + } } +#endif diff --git a/arch/arm/mach-tegra/legacy_irq.c b/arch/arm/mach-tegra/legacy_irq.c new file mode 100644 index 000000000000..7cc8601c19ff --- /dev/null +++ b/arch/arm/mach-tegra/legacy_irq.c @@ -0,0 +1,114 @@ +/* + * arch/arm/mach-tegra/legacy_irq.c + * + * Copyright (C) 2010 Google, Inc. + * Author: Colin Cross <ccross@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <mach/iomap.h> +#include <mach/legacy_irq.h> + +#define ICTLR_CPU_IER 0x20 +#define ICTLR_CPU_IER_SET 0x24 +#define ICTLR_CPU_IER_CLR 0x28 +#define ICTLR_CPU_IEP_CLASS 0x2C +#define ICTLR_CPU_IEP_VFIQ 0x08 +#define ICTLR_CPU_IEP_FIR 0x14 +#define ICTLR_CPU_IEP_FIR_SET 0x18 +#define ICTLR_CPU_IEP_FIR_CLR 0x1c + +static void __iomem *ictlr_reg_base[] = { + IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE), + IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE), + IO_ADDRESS(TEGRA_TERTIARY_ICTLR_BASE), + IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE), +}; + +/* When going into deep sleep, the CPU is powered down, taking the GIC with it + In order to wake, the wake interrupts need to be enabled in the legacy + interrupt controller. */ +void tegra_legacy_unmask_irq(unsigned int irq) +{ + void __iomem *base; + pr_debug("%s: %d\n", __func__, irq); + + irq -= 32; + base = ictlr_reg_base[irq>>5]; + writel(1 << (irq & 31), base + ICTLR_CPU_IER_SET); +} + +void tegra_legacy_mask_irq(unsigned int irq) +{ + void __iomem *base; + pr_debug("%s: %d\n", __func__, irq); + + irq -= 32; + base = ictlr_reg_base[irq>>5]; + writel(1 << (irq & 31), base + ICTLR_CPU_IER_CLR); +} + +void tegra_legacy_force_irq_set(unsigned int irq) +{ + void __iomem *base; + pr_debug("%s: %d\n", __func__, irq); + + irq -= 32; + base = ictlr_reg_base[irq>>5]; + writel(1 << (irq & 31), base + ICTLR_CPU_IEP_FIR_SET); +} + +void tegra_legacy_force_irq_clr(unsigned int irq) +{ + void __iomem *base; + pr_debug("%s: %d\n", __func__, irq); + + irq -= 32; + base = ictlr_reg_base[irq>>5]; + writel(1 << (irq & 31), base + ICTLR_CPU_IEP_FIR_CLR); +} + +int tegra_legacy_force_irq_status(unsigned int irq) +{ + void __iomem *base; + pr_debug("%s: %d\n", __func__, irq); + + irq -= 32; + base = ictlr_reg_base[irq>>5]; + return !!(readl(base + ICTLR_CPU_IEP_FIR) & (1 << (irq & 31))); +} + +void tegra_legacy_select_fiq(unsigned int irq, bool fiq) +{ + void __iomem *base; + pr_debug("%s: %d\n", __func__, irq); + + irq -= 32; + base = ictlr_reg_base[irq>>5]; + writel(fiq << (irq & 31), base + ICTLR_CPU_IEP_CLASS); +} + +unsigned long tegra_legacy_vfiq(int nr) +{ + void __iomem *base; + base = ictlr_reg_base[nr]; + return readl(base + ICTLR_CPU_IEP_VFIQ); +} + +unsigned long tegra_legacy_class(int nr) +{ + void __iomem *base; + base = ictlr_reg_base[nr]; + return readl(base + ICTLR_CPU_IEP_CLASS); +} diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c new file mode 100644 index 000000000000..53f5fa37014a --- /dev/null +++ b/arch/arm/mach-tegra/pcie.c @@ -0,0 +1,915 @@ +/* + * arch/arm/mach-tegra/pci.c + * + * PCIe host controller driver for TEGRA(2) SOCs + * + * Copyright (c) 2010, CompuLab, Ltd. + * Author: Mike Rapoport <mike@compulab.co.il> + * + * Based on NVIDIA PCIe driver + * Copyright (c) 2008-2009, NVIDIA Corporation. + * + * Bits taken from arch/arm/mach-dove/pcie.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/delay.h> + +#include <asm/sizes.h> +#include <asm/mach/pci.h> + +#include <mach/pinmux.h> +#include <mach/iomap.h> +#include <mach/clk.h> + +/* register definitions */ +#define AFI_OFFSET 0x3800 +#define PADS_OFFSET 0x3000 +#define RP0_OFFSET 0x0000 +#define RP1_OFFSET 0x1000 + +#define AFI_AXI_BAR0_SZ 0x00 +#define AFI_AXI_BAR1_SZ 0x04 +#define AFI_AXI_BAR2_SZ 0x08 +#define AFI_AXI_BAR3_SZ 0x0c +#define AFI_AXI_BAR4_SZ 0x10 +#define AFI_AXI_BAR5_SZ 0x14 + +#define AFI_AXI_BAR0_START 0x18 +#define AFI_AXI_BAR1_START 0x1c +#define AFI_AXI_BAR2_START 0x20 +#define AFI_AXI_BAR3_START 0x24 +#define AFI_AXI_BAR4_START 0x28 +#define AFI_AXI_BAR5_START 0x2c + +#define AFI_FPCI_BAR0 0x30 +#define AFI_FPCI_BAR1 0x34 +#define AFI_FPCI_BAR2 0x38 +#define AFI_FPCI_BAR3 0x3c +#define AFI_FPCI_BAR4 0x40 +#define AFI_FPCI_BAR5 0x44 + +#define AFI_CACHE_BAR0_SZ 0x48 +#define AFI_CACHE_BAR0_ST 0x4c +#define AFI_CACHE_BAR1_SZ 0x50 +#define AFI_CACHE_BAR1_ST 0x54 + +#define AFI_MSI_BAR_SZ 0x60 +#define AFI_MSI_FPCI_BAR_ST 0x64 +#define AFI_MSI_AXI_BAR_ST 0x68 + +#define AFI_CONFIGURATION 0xac +#define AFI_CONFIGURATION_EN_FPCI (1 << 0) + +#define AFI_FPCI_ERROR_MASKS 0xb0 + +#define AFI_INTR_MASK 0xb4 +#define AFI_INTR_MASK_INT_MASK (1 << 0) +#define AFI_INTR_MASK_MSI_MASK (1 << 8) + +#define AFI_INTR_CODE 0xb8 +#define AFI_INTR_CODE_MASK 0xf +#define AFI_INTR_MASTER_ABORT 4 +#define AFI_INTR_LEGACY 6 + +#define AFI_INTR_SIGNATURE 0xbc +#define AFI_SM_INTR_ENABLE 0xc4 + +#define AFI_AFI_INTR_ENABLE 0xc8 +#define AFI_INTR_EN_INI_SLVERR (1 << 0) +#define AFI_INTR_EN_INI_DECERR (1 << 1) +#define AFI_INTR_EN_TGT_SLVERR (1 << 2) +#define AFI_INTR_EN_TGT_DECERR (1 << 3) +#define AFI_INTR_EN_TGT_WRERR (1 << 4) +#define AFI_INTR_EN_DFPCI_DECERR (1 << 5) +#define AFI_INTR_EN_AXI_DECERR (1 << 6) +#define AFI_INTR_EN_FPCI_TIMEOUT (1 << 7) + +#define AFI_PCIE_CONFIG 0x0f8 +#define AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE (1 << 1) +#define AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE (1 << 2) +#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK (0xf << 20) +#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE (0x0 << 20) +#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL (0x1 << 20) + +#define AFI_FUSE 0x104 +#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2) + +#define AFI_PEX0_CTRL 0x110 +#define AFI_PEX1_CTRL 0x118 +#define AFI_PEX_CTRL_RST (1 << 0) +#define AFI_PEX_CTRL_REFCLK_EN (1 << 3) + +#define RP_VEND_XP 0x00000F00 +#define RP_VEND_XP_DL_UP (1 << 30) + +#define RP_LINK_CONTROL_STATUS 0x00000090 +#define RP_LINK_CONTROL_STATUS_LINKSTAT_MASK 0x3fff0000 + +#define PADS_CTL_SEL 0x0000009C + +#define PADS_CTL 0x000000A0 +#define PADS_CTL_IDDQ_1L (1 << 0) +#define PADS_CTL_TX_DATA_EN_1L (1 << 6) +#define PADS_CTL_RX_DATA_EN_1L (1 << 10) + +#define PADS_PLL_CTL 0x000000B8 +#define PADS_PLL_CTL_RST_B4SM (1 << 1) +#define PADS_PLL_CTL_LOCKDET (1 << 8) +#define PADS_PLL_CTL_REFCLK_MASK (0x3 << 16) +#define PADS_PLL_CTL_REFCLK_INTERNAL_CML (0 << 16) +#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS (1 << 16) +#define PADS_PLL_CTL_REFCLK_EXTERNAL (2 << 16) +#define PADS_PLL_CTL_TXCLKREF_MASK (0x1 << 20) +#define PADS_PLL_CTL_TXCLKREF_DIV10 (0 << 20) +#define PADS_PLL_CTL_TXCLKREF_DIV5 (1 << 20) + +/* PMC access is required for PCIE xclk (un)clamping */ +#define PMC_SCRATCH42 0x144 +#define PMC_SCRATCH42_PCX_CLAMP (1 << 0) + +static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); + +#define pmc_writel(value, reg) \ + __raw_writel(value, (u32)reg_pmc_base + (reg)) +#define pmc_readl(reg) \ + __raw_readl((u32)reg_pmc_base + (reg)) + +/* + * Tegra2 defines 1GB in the AXI address map for PCIe. + * + * That address space is split into different regions, with sizes and + * offsets as follows: + * + * 0x80000000 - 0x80003fff - PCI controller registers + * 0x80004000 - 0x80103fff - PCI configuration space + * 0x80104000 - 0x80203fff - PCI extended configuration space + * 0x80203fff - 0x803fffff - unused + * 0x80400000 - 0x8040ffff - downstream IO + * 0x80410000 - 0x8fffffff - unused + * 0x90000000 - 0x9fffffff - non-prefetchable memory + * 0xa0000000 - 0xbfffffff - prefetchable memory + */ +#define TEGRA_PCIE_BASE 0x80000000 + +#define PCIE_REGS_SZ SZ_16K +#define PCIE_CFG_OFF PCIE_REGS_SZ +#define PCIE_CFG_SZ SZ_1M +#define PCIE_EXT_CFG_OFF (PCIE_CFG_SZ + PCIE_CFG_OFF) +#define PCIE_EXT_CFG_SZ SZ_1M +#define PCIE_IOMAP_SZ (PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ) + +#define MMIO_BASE (TEGRA_PCIE_BASE + SZ_4M) +#define MMIO_SIZE SZ_64K +#define MEM_BASE_0 (TEGRA_PCIE_BASE + SZ_256M) +#define MEM_SIZE_0 SZ_128M +#define MEM_BASE_1 (MEM_BASE_0 + MEM_SIZE_0) +#define MEM_SIZE_1 SZ_128M +#define PREFETCH_MEM_BASE_0 (MEM_BASE_1 + MEM_SIZE_1) +#define PREFETCH_MEM_SIZE_0 SZ_128M +#define PREFETCH_MEM_BASE_1 (PREFETCH_MEM_BASE_0 + PREFETCH_MEM_SIZE_0) +#define PREFETCH_MEM_SIZE_1 SZ_128M + +#define PCIE_CONF_BUS(b) ((b) << 16) +#define PCIE_CONF_DEV(d) ((d) << 11) +#define PCIE_CONF_FUNC(f) ((f) << 8) +#define PCIE_CONF_REG(r) \ + (((r) & ~0x3) | (((r) < 256) ? PCIE_CFG_OFF : PCIE_EXT_CFG_OFF)) + +struct tegra_pcie_port { + int index; + u8 root_bus_nr; + void __iomem *base; + + bool link_up; + + char io_space_name[16]; + char mem_space_name[16]; + char prefetch_space_name[20]; + struct resource res[3]; +}; + +struct tegra_pcie_info { + struct tegra_pcie_port port[2]; + int num_ports; + + void __iomem *regs; + struct resource res_mmio; + + struct clk *pex_clk; + struct clk *afi_clk; + struct clk *pcie_xclk; + struct clk *pll_e; +}; + +static struct tegra_pcie_info tegra_pcie = { + .res_mmio = { + .name = "PCI IO", + .start = MMIO_BASE, + .end = MMIO_BASE + MMIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +void __iomem *tegra_pcie_io_base; +EXPORT_SYMBOL(tegra_pcie_io_base); + +static inline void afi_writel(u32 value, unsigned long offset) +{ + writel(value, offset + AFI_OFFSET + tegra_pcie.regs); +} + +static inline u32 afi_readl(unsigned long offset) +{ + return readl(offset + AFI_OFFSET + tegra_pcie.regs); +} + +static inline void pads_writel(u32 value, unsigned long offset) +{ + writel(value, offset + PADS_OFFSET + tegra_pcie.regs); +} + +static inline u32 pads_readl(unsigned long offset) +{ + return readl(offset + PADS_OFFSET + tegra_pcie.regs); +} + +static struct tegra_pcie_port *bus_to_port(int bus) +{ + int i; + + for (i = tegra_pcie.num_ports - 1; i >= 0; i--) { + int rbus = tegra_pcie.port[i].root_bus_nr; + if (rbus != -1 && rbus == bus) + break; + } + + return i >= 0 ? tegra_pcie.port + i : NULL; +} + +static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct tegra_pcie_port *pp = bus_to_port(bus->number); + void __iomem *addr; + + if (pp) { + if (devfn != 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + addr = pp->base + (where & ~0x3); + } else { + addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) + + PCIE_CONF_DEV(PCI_SLOT(devfn)) + + PCIE_CONF_FUNC(PCI_FUNC(devfn)) + + PCIE_CONF_REG(where)); + } + + *val = readl(addr); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + struct tegra_pcie_port *pp = bus_to_port(bus->number); + void __iomem *addr; + + u32 mask; + u32 tmp; + + if (pp) { + if (devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = pp->base + (where & ~0x3); + } else { + addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) + + PCIE_CONF_DEV(PCI_SLOT(devfn)) + + PCIE_CONF_FUNC(PCI_FUNC(devfn)) + + PCIE_CONF_REG(where)); + } + + if (size == 4) { + writel(val, addr); + return PCIBIOS_SUCCESSFUL; + } + + if (size == 2) + mask = ~(0xffff << ((where & 0x3) * 8)); + else if (size == 1) + mask = ~(0xff << ((where & 0x3) * 8)); + else + return PCIBIOS_BAD_REGISTER_NUMBER; + + tmp = readl(addr) & mask; + tmp |= val << ((where & 0x3) * 8); + writel(tmp, addr); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops tegra_pcie_ops = { + .read = tegra_pcie_read_conf, + .write = tegra_pcie_write_conf, +}; + +static void __devinit tegra_pcie_fixup_bridge(struct pci_dev *dev) +{ + u16 reg; + + if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) { + pci_read_config_word(dev, PCI_COMMAND, ®); + reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | PCI_COMMAND_SERR); + pci_write_config_word(dev, PCI_COMMAND, reg); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge); + +/* Tegra PCIE root complex wrongly reports device class */ +static void __devinit tegra_pcie_fixup_class(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class); + +/* Tegra PCIE requires relaxed ordering */ +static void __devinit tegra_pcie_relax_enable(struct pci_dev *dev) +{ + u16 val16; + int pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + + if (pos <= 0) { + dev_err(&dev->dev, "skipping relaxed ordering fixup\n"); + return; + } + + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &val16); + val16 |= PCI_EXP_DEVCTL_RELAX_EN; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, val16); +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable); + +static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct tegra_pcie_port *pp; + + if (nr >= tegra_pcie.num_ports) + return 0; + + pp = tegra_pcie.port + nr; + pp->root_bus_nr = sys->busnr; + + /* + * IORESOURCE_IO + */ + snprintf(pp->io_space_name, sizeof(pp->io_space_name), + "PCIe %d I/O", pp->index); + pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; + pp->res[0].name = pp->io_space_name; + if (pp->index == 0) { + pp->res[0].start = PCIBIOS_MIN_IO; + pp->res[0].end = pp->res[0].start + SZ_32K - 1; + } else { + pp->res[0].start = PCIBIOS_MIN_IO + SZ_32K; + pp->res[0].end = IO_SPACE_LIMIT; + } + pp->res[0].flags = IORESOURCE_IO; + if (request_resource(&ioport_resource, &pp->res[0])) + panic("Request PCIe IO resource failed\n"); + sys->resource[0] = &pp->res[0]; + + /* + * IORESOURCE_MEM + */ + snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), + "PCIe %d MEM", pp->index); + pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; + pp->res[1].name = pp->mem_space_name; + if (pp->index == 0) { + pp->res[1].start = MEM_BASE_0; + pp->res[1].end = pp->res[1].start + MEM_SIZE_0 - 1; + } else { + pp->res[1].start = MEM_BASE_1; + pp->res[1].end = pp->res[1].start + MEM_SIZE_1 - 1; + } + pp->res[1].flags = IORESOURCE_MEM; + if (request_resource(&iomem_resource, &pp->res[1])) + panic("Request PCIe Memory resource failed\n"); + sys->resource[1] = &pp->res[1]; + + /* + * IORESOURCE_MEM | IORESOURCE_PREFETCH + */ + snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name), + "PCIe %d PREFETCH MEM", pp->index); + pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0; + pp->res[2].name = pp->prefetch_space_name; + if (pp->index == 0) { + pp->res[2].start = PREFETCH_MEM_BASE_0; + pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_0 - 1; + } else { + pp->res[2].start = PREFETCH_MEM_BASE_1; + pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_1 - 1; + } + pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + if (request_resource(&iomem_resource, &pp->res[2])) + panic("Request PCIe Prefetch Memory resource failed\n"); + sys->resource[2] = &pp->res[2]; + + return 1; +} + +static int tegra_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + return INT_PCIE_INTR; +} + +static struct pci_bus __init *tegra_pcie_scan_bus(int nr, + struct pci_sys_data *sys) +{ + struct tegra_pcie_port *pp; + + if (nr >= tegra_pcie.num_ports) + return 0; + + pp = tegra_pcie.port + nr; + pp->root_bus_nr = sys->busnr; + + return pci_scan_bus(sys->busnr, &tegra_pcie_ops, sys); +} + +static struct hw_pci tegra_pcie_hw __initdata = { + .nr_controllers = 2, + .setup = tegra_pcie_setup, + .scan = tegra_pcie_scan_bus, + .swizzle = pci_std_swizzle, + .map_irq = tegra_pcie_map_irq, +}; + + +static irqreturn_t tegra_pcie_isr(int irq, void *arg) +{ + const char *err_msg[] = { + "Unknown", + "AXI slave error", + "AXI decode error", + "Target abort", + "Master abort", + "Invalid write", + "Response decoding error", + "AXI response decoding error", + "Transcation timeout", + }; + + u32 code, signature; + + code = afi_readl(AFI_INTR_CODE) & AFI_INTR_CODE_MASK; + signature = afi_readl(AFI_INTR_SIGNATURE); + afi_writel(0, AFI_INTR_CODE); + + if (code == AFI_INTR_LEGACY) + return IRQ_NONE; + + if (code >= ARRAY_SIZE(err_msg)) + code = 0; + + /* + * do not pollute kernel log with master abort reports since they + * happen a lot during enumeration + */ + if (code == AFI_INTR_MASTER_ABORT) + pr_debug("PCIE: %s, signature: %08x\n", err_msg[code], signature); + else + pr_err("PCIE: %s, signature: %08x\n", err_msg[code], signature); + + return IRQ_HANDLED; +} + +static void tegra_pcie_setup_translations(void) +{ + u32 fpci_bar; + u32 size; + u32 axi_address; + + /* Bar 0: config Bar */ + fpci_bar = ((u32)0xfdff << 16); + size = PCIE_CFG_SZ; + axi_address = TEGRA_PCIE_BASE + PCIE_CFG_OFF; + afi_writel(axi_address, AFI_AXI_BAR0_START); + afi_writel(size >> 12, AFI_AXI_BAR0_SZ); + afi_writel(fpci_bar, AFI_FPCI_BAR0); + + /* Bar 1: extended config Bar */ + fpci_bar = ((u32)0xfe1 << 20); + size = PCIE_EXT_CFG_SZ; + axi_address = TEGRA_PCIE_BASE + PCIE_EXT_CFG_OFF; + afi_writel(axi_address, AFI_AXI_BAR1_START); + afi_writel(size >> 12, AFI_AXI_BAR1_SZ); + afi_writel(fpci_bar, AFI_FPCI_BAR1); + + /* Bar 2: downstream IO bar */ + fpci_bar = ((__u32)0xfdfc << 16); + size = MMIO_SIZE; + axi_address = MMIO_BASE; + afi_writel(axi_address, AFI_AXI_BAR2_START); + afi_writel(size >> 12, AFI_AXI_BAR2_SZ); + afi_writel(fpci_bar, AFI_FPCI_BAR2); + + /* Bar 3: prefetchable memory BAR */ + fpci_bar = (((PREFETCH_MEM_BASE_0 >> 12) & 0x0fffffff) << 4) | 0x1; + size = PREFETCH_MEM_SIZE_0 + PREFETCH_MEM_SIZE_1; + axi_address = PREFETCH_MEM_BASE_0; + afi_writel(axi_address, AFI_AXI_BAR3_START); + afi_writel(size >> 12, AFI_AXI_BAR3_SZ); + afi_writel(fpci_bar, AFI_FPCI_BAR3); + + /* Bar 4: non prefetchable memory BAR */ + fpci_bar = (((MEM_BASE_0 >> 12) & 0x0FFFFFFF) << 4) | 0x1; + size = MEM_SIZE_0 + MEM_SIZE_1; + axi_address = MEM_BASE_0; + afi_writel(axi_address, AFI_AXI_BAR4_START); + afi_writel(size >> 12, AFI_AXI_BAR4_SZ); + afi_writel(fpci_bar, AFI_FPCI_BAR4); + + /* Bar 5: NULL out the remaining BAR as it is not used */ + fpci_bar = 0; + size = 0; + axi_address = 0; + afi_writel(axi_address, AFI_AXI_BAR5_START); + afi_writel(size >> 12, AFI_AXI_BAR5_SZ); + afi_writel(fpci_bar, AFI_FPCI_BAR5); + + /* map all upstream transactions as uncached */ + afi_writel(PHYS_OFFSET, AFI_CACHE_BAR0_ST); + afi_writel(0, AFI_CACHE_BAR0_SZ); + afi_writel(0, AFI_CACHE_BAR1_ST); + afi_writel(0, AFI_CACHE_BAR1_SZ); + + /* No MSI */ + afi_writel(0, AFI_MSI_FPCI_BAR_ST); + afi_writel(0, AFI_MSI_BAR_SZ); + afi_writel(0, AFI_MSI_AXI_BAR_ST); + afi_writel(0, AFI_MSI_BAR_SZ); +} + +static void tegra_pcie_enable_controller(void) +{ + u32 val, reg; + int i; + + /* Enable slot clock and pulse the reset signals */ + for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) { + val = afi_readl(reg) | AFI_PEX_CTRL_REFCLK_EN; + afi_writel(val, reg); + val &= ~AFI_PEX_CTRL_RST; + afi_writel(val, reg); + + val = afi_readl(reg) | AFI_PEX_CTRL_RST; + afi_writel(val, reg); + } + + /* Enable dual controller and both ports */ + val = afi_readl(AFI_PCIE_CONFIG); + val &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE | + AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE | + AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK); + val |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL; + afi_writel(val, AFI_PCIE_CONFIG); + + val = afi_readl(AFI_FUSE) & ~AFI_FUSE_PCIE_T0_GEN2_DIS; + afi_writel(val, AFI_FUSE); + + /* Initialze internal PHY, enable up to 16 PCIE lanes */ + pads_writel(0x0, PADS_CTL_SEL); + + /* override IDDQ to 1 on all 4 lanes */ + val = pads_readl(PADS_CTL) | PADS_CTL_IDDQ_1L; + pads_writel(val, PADS_CTL); + + /* + * set up PHY PLL inputs select PLLE output as refclock, + * set TX ref sel to div10 (not div5) + */ + val = pads_readl(PADS_PLL_CTL); + val &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK); + val |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10); + pads_writel(val, PADS_PLL_CTL); + + /* take PLL out of reset */ + val = pads_readl(PADS_PLL_CTL) | PADS_PLL_CTL_RST_B4SM; + pads_writel(val, PADS_PLL_CTL); + + /* + * Hack, set the clock voltage to the DEFAULT provided by hw folks. + * This doesn't exist in the documentation + */ + pads_writel(0xfa5cfa5c, 0xc8); + + /* Wait for the PLL to lock */ + do { + val = pads_readl(PADS_PLL_CTL); + } while (!(val & PADS_PLL_CTL_LOCKDET)); + + /* turn off IDDQ override */ + val = pads_readl(PADS_CTL) & ~PADS_CTL_IDDQ_1L; + pads_writel(val, PADS_CTL); + + /* enable TX/RX data */ + val = pads_readl(PADS_CTL); + val |= (PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L); + pads_writel(val, PADS_CTL); + + /* Take the PCIe interface module out of reset */ + tegra_periph_reset_deassert(tegra_pcie.pcie_xclk); + + /* Finally enable PCIe */ + val = afi_readl(AFI_CONFIGURATION) | AFI_CONFIGURATION_EN_FPCI; + afi_writel(val, AFI_CONFIGURATION); + + val = (AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR | + AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR | + AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR); + afi_writel(val, AFI_AFI_INTR_ENABLE); + afi_writel(0xffffffff, AFI_SM_INTR_ENABLE); + + /* FIXME: No MSI for now, only INT */ + afi_writel(AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK); + + /* Disable all execptions */ + afi_writel(0, AFI_FPCI_ERROR_MASKS); + + return; +} + +static void tegra_pcie_xclk_clamp(bool clamp) +{ + u32 reg; + + reg = pmc_readl(PMC_SCRATCH42) & ~PMC_SCRATCH42_PCX_CLAMP; + + if (clamp) + reg |= PMC_SCRATCH42_PCX_CLAMP; + + pmc_writel(reg, PMC_SCRATCH42); +} + +static int tegra_pcie_power_on(void) +{ + tegra_pcie_xclk_clamp(true); + tegra_periph_reset_assert(tegra_pcie.pcie_xclk); + tegra_pcie_xclk_clamp(false); + + clk_enable(tegra_pcie.afi_clk); + clk_enable(tegra_pcie.pex_clk); + return clk_enable(tegra_pcie.pll_e); +} + +static void tegra_pcie_power_off(void) +{ + tegra_periph_reset_assert(tegra_pcie.pcie_xclk); + tegra_periph_reset_assert(tegra_pcie.afi_clk); + tegra_periph_reset_assert(tegra_pcie.pex_clk); + + tegra_pcie_xclk_clamp(true); +} + +static int tegra_pcie_clocks_get(void) +{ + int err; + + tegra_pcie.pex_clk = clk_get(NULL, "pex"); + if (IS_ERR(tegra_pcie.pex_clk)) + return PTR_ERR(tegra_pcie.pex_clk); + + tegra_pcie.afi_clk = clk_get(NULL, "afi"); + if (IS_ERR(tegra_pcie.afi_clk)) { + err = PTR_ERR(tegra_pcie.afi_clk); + goto err_afi_clk; + } + + tegra_pcie.pcie_xclk = clk_get(NULL, "pcie_xclk"); + if (IS_ERR(tegra_pcie.pcie_xclk)) { + err = PTR_ERR(tegra_pcie.pcie_xclk); + goto err_pcie_xclk; + } + + tegra_pcie.pll_e = clk_get_sys(NULL, "pll_e"); + if (IS_ERR(tegra_pcie.pll_e)) { + err = PTR_ERR(tegra_pcie.pll_e); + goto err_pll_e; + } + + return 0; + +err_pll_e: + clk_put(tegra_pcie.pcie_xclk); +err_pcie_xclk: + clk_put(tegra_pcie.afi_clk); +err_afi_clk: + clk_put(tegra_pcie.pex_clk); + + return err; +} + +static void tegra_pcie_clocks_put(void) +{ + clk_put(tegra_pcie.pll_e); + clk_put(tegra_pcie.pcie_xclk); + clk_put(tegra_pcie.afi_clk); + clk_put(tegra_pcie.pex_clk); +} + +static int __init tegra_pcie_get_resources(void) +{ + struct resource *res_mmio = &tegra_pcie.res_mmio; + int err; + + err = tegra_pcie_clocks_get(); + if (err) { + pr_err("PCIE: failed to get clocks: %d\n", err); + return err; + } + + err = tegra_pcie_power_on(); + if (err) { + pr_err("PCIE: failed to power up: %d\n", err); + goto err_pwr_on; + } + + tegra_pcie.regs = ioremap_nocache(TEGRA_PCIE_BASE, PCIE_IOMAP_SZ); + if (tegra_pcie.regs == NULL) { + pr_err("PCIE: Failed to map PCI/AFI registers\n"); + err = -ENOMEM; + goto err_map_reg; + } + + err = request_resource(&iomem_resource, res_mmio); + if (err) { + pr_err("PCIE: Failed to request resources: %d\n", err); + goto err_req_io; + } + + tegra_pcie_io_base = ioremap_nocache(res_mmio->start, + resource_size(res_mmio)); + if (tegra_pcie_io_base == NULL) { + pr_err("PCIE: Failed to map IO\n"); + err = -ENOMEM; + goto err_map_io; + } + + err = request_irq(INT_PCIE_INTR, tegra_pcie_isr, + IRQF_SHARED, "PCIE", &tegra_pcie); + if (err) { + pr_err("PCIE: Failed to register IRQ: %d\n", err); + goto err_irq; + } + set_irq_flags(INT_PCIE_INTR, IRQF_VALID); + + return 0; + +err_irq: + iounmap(tegra_pcie_io_base); +err_map_io: + release_resource(&tegra_pcie.res_mmio); +err_req_io: + iounmap(tegra_pcie.regs); +err_map_reg: + tegra_pcie_power_off(); +err_pwr_on: + tegra_pcie_clocks_put(); + + return err; +} + +/* + * FIXME: If there are no PCIe cards attached, then calling this function + * can result in the increase of the bootup time as there are big timeout + * loops. + */ +#define TEGRA_PCIE_LINKUP_TIMEOUT 200 /* up to 1.2 seconds */ +static bool tegra_pcie_check_link(struct tegra_pcie_port *pp, int idx, + u32 reset_reg) +{ + u32 reg; + int retries = 3; + int timeout; + + do { + timeout = TEGRA_PCIE_LINKUP_TIMEOUT; + while (timeout) { + reg = readl(pp->base + RP_VEND_XP); + + if (reg & RP_VEND_XP_DL_UP) + break; + + mdelay(1); + timeout--; + } + + if (!timeout) { + pr_err("PCIE: port %d: link down, retrying\n", idx); + goto retry; + } + + timeout = TEGRA_PCIE_LINKUP_TIMEOUT; + while (timeout) { + reg = readl(pp->base + RP_LINK_CONTROL_STATUS); + + if (reg & 0x20000000) + return true; + + mdelay(1); + timeout--; + } + +retry: + /* Pulse the PEX reset */ + reg = afi_readl(reset_reg) | AFI_PEX_CTRL_RST; + afi_writel(reg, reset_reg); + mdelay(1); + reg = afi_readl(reset_reg) & ~AFI_PEX_CTRL_RST; + afi_writel(reg, reset_reg); + + retries--; + } while (retries); + + return false; +} + +static void __init tegra_pcie_add_port(int index, u32 offset, u32 reset_reg) +{ + struct tegra_pcie_port *pp; + + pp = tegra_pcie.port + tegra_pcie.num_ports; + + pp->index = -1; + pp->base = tegra_pcie.regs + offset; + pp->link_up = tegra_pcie_check_link(pp, index, reset_reg); + + if (!pp->link_up) { + pp->base = NULL; + printk(KERN_INFO "PCIE: port %d: link down, ignoring\n", index); + return; + } + + tegra_pcie.num_ports++; + pp->index = index; + pp->root_bus_nr = -1; + memset(pp->res, 0, sizeof(pp->res)); +} + +int __init tegra_pcie_init(bool init_port0, bool init_port1) +{ + int err; + + if (!(init_port0 || init_port1)) + return -ENODEV; + + err = tegra_pcie_get_resources(); + if (err) + return err; + + tegra_pcie_enable_controller(); + + /* setup the AFI address translations */ + tegra_pcie_setup_translations(); + + if (init_port0) + tegra_pcie_add_port(0, RP0_OFFSET, AFI_PEX0_CTRL); + + if (init_port1) + tegra_pcie_add_port(1, RP1_OFFSET, AFI_PEX1_CTRL); + + pci_common_init(&tegra_pcie_hw); + + return 0; +} diff --git a/arch/arm/mach-tegra/pinmux-t2-tables.c b/arch/arm/mach-tegra/pinmux-t2-tables.c new file mode 100644 index 000000000000..a6ea34e782dc --- /dev/null +++ b/arch/arm/mach-tegra/pinmux-t2-tables.c @@ -0,0 +1,260 @@ +/* + * linux/arch/arm/mach-tegra/pinmux-t2-tables.c + * + * Common pinmux configurations for Tegra 2 SoCs + * + * Copyright (C) 2010 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/string.h> + +#include <mach/iomap.h> +#include <mach/pinmux.h> + +#define DRIVE_PINGROUP(pg_name, r) \ + [TEGRA_DRIVE_PINGROUP_ ## pg_name] = { \ + .name = #pg_name, \ + .reg = r \ + } + +const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = { + DRIVE_PINGROUP(AO1, 0x868), + DRIVE_PINGROUP(AO2, 0x86c), + DRIVE_PINGROUP(AT1, 0x870), + DRIVE_PINGROUP(AT2, 0x874), + DRIVE_PINGROUP(CDEV1, 0x878), + DRIVE_PINGROUP(CDEV2, 0x87c), + DRIVE_PINGROUP(CSUS, 0x880), + DRIVE_PINGROUP(DAP1, 0x884), + DRIVE_PINGROUP(DAP2, 0x888), + DRIVE_PINGROUP(DAP3, 0x88c), + DRIVE_PINGROUP(DAP4, 0x890), + DRIVE_PINGROUP(DBG, 0x894), + DRIVE_PINGROUP(LCD1, 0x898), + DRIVE_PINGROUP(LCD2, 0x89c), + DRIVE_PINGROUP(SDMMC2, 0x8a0), + DRIVE_PINGROUP(SDMMC3, 0x8a4), + DRIVE_PINGROUP(SPI, 0x8a8), + DRIVE_PINGROUP(UAA, 0x8ac), + DRIVE_PINGROUP(UAB, 0x8b0), + DRIVE_PINGROUP(UART2, 0x8b4), + DRIVE_PINGROUP(UART3, 0x8b8), + DRIVE_PINGROUP(VI1, 0x8bc), + DRIVE_PINGROUP(VI2, 0x8c0), + DRIVE_PINGROUP(XM2A, 0x8c4), + DRIVE_PINGROUP(XM2C, 0x8c8), + DRIVE_PINGROUP(XM2D, 0x8cc), + DRIVE_PINGROUP(XM2CLK, 0x8d0), + DRIVE_PINGROUP(MEMCOMP, 0x8d4), +}; + +#define PINGROUP(pg_name, vdd, f0, f1, f2, f3, f_safe, \ + tri_r, tri_b, mux_r, mux_b, pupd_r, pupd_b) \ + [TEGRA_PINGROUP_ ## pg_name] = { \ + .name = #pg_name, \ + .vddio = TEGRA_VDDIO_ ## vdd, \ + .funcs = { \ + TEGRA_MUX_ ## f0, \ + TEGRA_MUX_ ## f1, \ + TEGRA_MUX_ ## f2, \ + TEGRA_MUX_ ## f3, \ + }, \ + .func_safe = TEGRA_MUX_ ## f_safe, \ + .tri_reg = tri_r, \ + .tri_bit = tri_b, \ + .mux_reg = mux_r, \ + .mux_bit = mux_b, \ + .pupd_reg = pupd_r, \ + .pupd_bit = pupd_b, \ + } + +const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = { + PINGROUP(ATA, NAND, IDE, NAND, GMI, RSVD, IDE, 0x14, 0, 0x80, 24, 0xA0, 0), + PINGROUP(ATB, NAND, IDE, NAND, GMI, SDIO4, IDE, 0x14, 1, 0x80, 16, 0xA0, 2), + PINGROUP(ATC, NAND, IDE, NAND, GMI, SDIO4, IDE, 0x14, 2, 0x80, 22, 0xA0, 4), + PINGROUP(ATD, NAND, IDE, NAND, GMI, SDIO4, IDE, 0x14, 3, 0x80, 20, 0xA0, 6), + PINGROUP(ATE, NAND, IDE, NAND, GMI, RSVD, IDE, 0x18, 25, 0x80, 12, 0xA0, 8), + PINGROUP(CDEV1, AUDIO, OSC, PLLA_OUT, PLLM_OUT1, AUDIO_SYNC, OSC, 0x14, 4, 0x88, 2, 0xA8, 0), + PINGROUP(CDEV2, AUDIO, OSC, AHB_CLK, APB_CLK, PLLP_OUT4, OSC, 0x14, 5, 0x88, 4, 0xA8, 2), + PINGROUP(CRTP, LCD, CRT, RSVD, RSVD, RSVD, RSVD, 0x20, 14, 0x98, 20, 0xA4, 24), + PINGROUP(CSUS, VI, PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK, PLLC_OUT1, 0x14, 6, 0x88, 6, 0xAC, 24), + PINGROUP(DAP1, AUDIO, DAP1, RSVD, GMI, SDIO2, DAP1, 0x14, 7, 0x88, 20, 0xA0, 10), + PINGROUP(DAP2, AUDIO, DAP2, TWC, RSVD, GMI, DAP2, 0x14, 8, 0x88, 22, 0xA0, 12), + PINGROUP(DAP3, BB, DAP3, RSVD, RSVD, RSVD, DAP3, 0x14, 9, 0x88, 24, 0xA0, 14), + PINGROUP(DAP4, UART, DAP4, RSVD, GMI, RSVD, DAP4, 0x14, 10, 0x88, 26, 0xA0, 16), + PINGROUP(DDC, LCD, I2C2, RSVD, RSVD, RSVD, RSVD4, 0x18, 31, 0x88, 0, 0xB0, 28), + PINGROUP(DTA, VI, RSVD, SDIO2, VI, RSVD, RSVD4, 0x14, 11, 0x84, 20, 0xA0, 18), + PINGROUP(DTB, VI, RSVD, RSVD, VI, SPI1, RSVD1, 0x14, 12, 0x84, 22, 0xA0, 20), + PINGROUP(DTC, VI, RSVD, RSVD, VI, RSVD, RSVD1, 0x14, 13, 0x84, 26, 0xA0, 22), + PINGROUP(DTD, VI, RSVD, SDIO2, VI, RSVD, RSVD1, 0x14, 14, 0x84, 28, 0xA0, 24), + PINGROUP(DTE, VI, RSVD, RSVD, VI, SPI1, RSVD1, 0x14, 15, 0x84, 30, 0xA0, 26), + PINGROUP(DTF, VI, I2C3, RSVD, VI, RSVD, RSVD4, 0x20, 12, 0x98, 30, 0xA0, 28), + PINGROUP(GMA, NAND, UARTE, SPI3, GMI, SDIO4, SPI3, 0x14, 28, 0x84, 0, 0xB0, 20), + PINGROUP(GMB, NAND, IDE, NAND, GMI, GMI_INT, GMI, 0x18, 29, 0x88, 28, 0xB0, 22), + PINGROUP(GMC, NAND, UARTD, SPI4, GMI, SFLASH, SPI4, 0x14, 29, 0x84, 2, 0xB0, 24), + PINGROUP(GMD, NAND, RSVD, NAND, GMI, SFLASH, GMI, 0x18, 30, 0x88, 30, 0xB0, 26), + PINGROUP(GME, NAND, RSVD, DAP5, GMI, SDIO4, GMI, 0x18, 0, 0x8C, 0, 0xA8, 24), + PINGROUP(GPU, UART, PWM, UARTA, GMI, RSVD, RSVD4, 0x14, 16, 0x8C, 4, 0xA4, 20), + PINGROUP(GPU7, SYS, RTCK, RSVD, RSVD, RSVD, RTCK, 0x20, 11, 0x98, 28, 0xA4, 6), + PINGROUP(GPV, SD, PCIE, RSVD, RSVD, RSVD, PCIE, 0x14, 17, 0x8C, 2, 0xA0, 30), + PINGROUP(HDINT, LCD, HDMI, RSVD, RSVD, RSVD, HDMI, 0x1C, 23, 0x84, 4, 0xAC, 22), + PINGROUP(I2CP, SYS, I2C, RSVD, RSVD, RSVD, RSVD4, 0x14, 18, 0x88, 8, 0xA4, 2), + PINGROUP(IRRX, UART, UARTA, UARTB, GMI, SPI4, UARTB, 0x14, 20, 0x88, 18, 0xA8, 22), + PINGROUP(IRTX, UART, UARTA, UARTB, GMI, SPI4, UARTB, 0x14, 19, 0x88, 16, 0xA8, 20), + PINGROUP(KBCA, SYS, KBC, NAND, SDIO2, EMC_TEST0_DLL, KBC, 0x14, 22, 0x88, 10, 0xA4, 8), + PINGROUP(KBCB, SYS, KBC, NAND, SDIO2, MIO, KBC, 0x14, 21, 0x88, 12, 0xA4, 10), + PINGROUP(KBCC, SYS, KBC, NAND, TRACE, EMC_TEST1_DLL, KBC, 0x18, 26, 0x88, 14, 0xA4, 12), + PINGROUP(KBCD, SYS, KBC, NAND, SDIO2, MIO, KBC, 0x20, 10, 0x98, 26, 0xA4, 14), + PINGROUP(KBCE, SYS, KBC, NAND, OWR, RSVD, KBC, 0x14, 26, 0x80, 28, 0xB0, 2), + PINGROUP(KBCF, SYS, KBC, NAND, TRACE, MIO, KBC, 0x14, 27, 0x80, 26, 0xB0, 0), + PINGROUP(LCSN, LCD, DISPLAYA, DISPLAYB, SPI3, RSVD, RSVD4, 0x1C, 31, 0x90, 12, 0xAC, 20), + PINGROUP(LD0, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 0, 0x94, 0, 0xAC, 12), + PINGROUP(LD1, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 1, 0x94, 2, 0xAC, 12), + PINGROUP(LD10, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 10, 0x94, 20, 0xAC, 12), + PINGROUP(LD11, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 11, 0x94, 22, 0xAC, 12), + PINGROUP(LD12, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 12, 0x94, 24, 0xAC, 12), + PINGROUP(LD13, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 13, 0x94, 26, 0xAC, 12), + PINGROUP(LD14, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 14, 0x94, 28, 0xAC, 12), + PINGROUP(LD15, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 15, 0x94, 30, 0xAC, 12), + PINGROUP(LD16, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 16, 0x98, 0, 0xAC, 12), + PINGROUP(LD17, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x1C, 17, 0x98, 2, 0xAC, 12), + PINGROUP(LD2, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 2, 0x94, 4, 0xAC, 12), + PINGROUP(LD3, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 3, 0x94, 6, 0xAC, 12), + PINGROUP(LD4, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 4, 0x94, 8, 0xAC, 12), + PINGROUP(LD5, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 5, 0x94, 10, 0xAC, 12), + PINGROUP(LD6, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 6, 0x94, 12, 0xAC, 12), + PINGROUP(LD7, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 7, 0x94, 14, 0xAC, 12), + PINGROUP(LD8, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 8, 0x94, 16, 0xAC, 12), + PINGROUP(LD9, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 9, 0x94, 18, 0xAC, 12), + PINGROUP(LDC, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x1C, 30, 0x90, 14, 0xAC, 20), + PINGROUP(LDI, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x20, 6, 0x98, 16, 0xAC, 18), + PINGROUP(LHP0, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x1C, 18, 0x98, 10, 0xAC, 16), + PINGROUP(LHP1, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x1C, 19, 0x98, 4, 0xAC, 14), + PINGROUP(LHP2, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x1C, 20, 0x98, 6, 0xAC, 14), + PINGROUP(LHS, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x20, 7, 0x90, 22, 0xAC, 22), + PINGROUP(LM0, LCD, DISPLAYA, DISPLAYB, SPI3, RSVD, RSVD4, 0x1C, 24, 0x90, 26, 0xAC, 22), + PINGROUP(LM1, LCD, DISPLAYA, DISPLAYB, RSVD, CRT, RSVD3, 0x1C, 25, 0x90, 28, 0xAC, 22), + PINGROUP(LPP, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x20, 8, 0x98, 14, 0xAC, 18), + PINGROUP(LPW0, LCD, DISPLAYA, DISPLAYB, SPI3, HDMI, DISPLAYA, 0x20, 3, 0x90, 0, 0xAC, 20), + PINGROUP(LPW1, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x20, 4, 0x90, 2, 0xAC, 20), + PINGROUP(LPW2, LCD, DISPLAYA, DISPLAYB, SPI3, HDMI, DISPLAYA, 0x20, 5, 0x90, 4, 0xAC, 20), + PINGROUP(LSC0, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 27, 0x90, 18, 0xAC, 22), + PINGROUP(LSC1, LCD, DISPLAYA, DISPLAYB, SPI3, HDMI, DISPLAYA, 0x1C, 28, 0x90, 20, 0xAC, 20), + PINGROUP(LSCK, LCD, DISPLAYA, DISPLAYB, SPI3, HDMI, DISPLAYA, 0x1C, 29, 0x90, 16, 0xAC, 20), + PINGROUP(LSDA, LCD, DISPLAYA, DISPLAYB, SPI3, HDMI, DISPLAYA, 0x20, 1, 0x90, 8, 0xAC, 20), + PINGROUP(LSDI, LCD, DISPLAYA, DISPLAYB, SPI3, RSVD, DISPLAYA, 0x20, 2, 0x90, 6, 0xAC, 20), + PINGROUP(LSPI, LCD, DISPLAYA, DISPLAYB, XIO, HDMI, DISPLAYA, 0x20, 0, 0x90, 10, 0xAC, 22), + PINGROUP(LVP0, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x1C, 21, 0x90, 30, 0xAC, 22), + PINGROUP(LVP1, LCD, DISPLAYA, DISPLAYB, RSVD, RSVD, RSVD4, 0x1C, 22, 0x98, 8, 0xAC, 16), + PINGROUP(LVS, LCD, DISPLAYA, DISPLAYB, XIO, RSVD, RSVD4, 0x1C, 26, 0x90, 24, 0xAC, 22), + PINGROUP(OWC, SYS, OWR, RSVD, RSVD, RSVD, OWR, 0x14, 31, 0x84, 8, 0xB0, 30), + PINGROUP(PMC, SYS, PWR_ON, PWR_INTR, RSVD, RSVD, PWR_ON, 0x14, 23, 0x98, 18, -1, -1), + PINGROUP(PTA, NAND, I2C2, HDMI, GMI, RSVD, RSVD4, 0x14, 24, 0x98, 22, 0xA4, 4), + PINGROUP(RM, UART, I2C, RSVD, RSVD, RSVD, RSVD4, 0x14, 25, 0x80, 14, 0xA4, 0), + PINGROUP(SDB, SD, UARTA, PWM, SDIO3, SPI2, PWM, 0x20, 15, 0x8C, 10, -1, -1), + PINGROUP(SDC, SD, PWM, TWC, SDIO3, SPI3, TWC, 0x18, 1, 0x8C, 12, 0xAC, 28), + PINGROUP(SDD, SD, UARTA, PWM, SDIO3, SPI3, PWM, 0x18, 2, 0x8C, 14, 0xAC, 30), + PINGROUP(SDIO1, BB, SDIO1, RSVD, UARTE, UARTA, RSVD2, 0x14, 30, 0x80, 30, 0xB0, 18), + PINGROUP(SLXA, SD, PCIE, SPI4, SDIO3, SPI2, PCIE, 0x18, 3, 0x84, 6, 0xA4, 22), + PINGROUP(SLXC, SD, SPDIF, SPI4, SDIO3, SPI2, SPI4, 0x18, 5, 0x84, 10, 0xA4, 26), + PINGROUP(SLXD, SD, SPDIF, SPI4, SDIO3, SPI2, SPI4, 0x18, 6, 0x84, 12, 0xA4, 28), + PINGROUP(SLXK, SD, PCIE, SPI4, SDIO3, SPI2, PCIE, 0x18, 7, 0x84, 14, 0xA4, 30), + PINGROUP(SPDI, AUDIO, SPDIF, RSVD, I2C, SDIO2, RSVD2, 0x18, 8, 0x8C, 8, 0xA4, 16), + PINGROUP(SPDO, AUDIO, SPDIF, RSVD, I2C, SDIO2, RSVD2, 0x18, 9, 0x8C, 6, 0xA4, 18), + PINGROUP(SPIA, AUDIO, SPI1, SPI2, SPI3, GMI, GMI, 0x18, 10, 0x8C, 30, 0xA8, 4), + PINGROUP(SPIB, AUDIO, SPI1, SPI2, SPI3, GMI, GMI, 0x18, 11, 0x8C, 28, 0xA8, 6), + PINGROUP(SPIC, AUDIO, SPI1, SPI2, SPI3, GMI, GMI, 0x18, 12, 0x8C, 26, 0xA8, 8), + PINGROUP(SPID, AUDIO, SPI2, SPI1, SPI2_ALT, GMI, GMI, 0x18, 13, 0x8C, 24, 0xA8, 10), + PINGROUP(SPIE, AUDIO, SPI2, SPI1, SPI2_ALT, GMI, GMI, 0x18, 14, 0x8C, 22, 0xA8, 12), + PINGROUP(SPIF, AUDIO, SPI3, SPI1, SPI2, RSVD, RSVD4, 0x18, 15, 0x8C, 20, 0xA8, 14), + PINGROUP(SPIG, AUDIO, SPI3, SPI2, SPI2_ALT, I2C, SPI2_ALT, 0x18, 16, 0x8C, 18, 0xA8, 16), + PINGROUP(SPIH, AUDIO, SPI3, SPI2, SPI2_ALT, I2C, SPI2_ALT, 0x18, 17, 0x8C, 16, 0xA8, 18), + PINGROUP(UAA, BB, SPI3, MIPI_HS, UARTA, ULPI, MIPI_HS, 0x18, 18, 0x80, 0, 0xAC, 0), + PINGROUP(UAB, BB, SPI2, MIPI_HS, UARTA, ULPI, MIPI_HS, 0x18, 19, 0x80, 2, 0xAC, 2), + PINGROUP(UAC, BB, OWR, RSVD, RSVD, RSVD, RSVD4, 0x18, 20, 0x80, 4, 0xAC, 4), + PINGROUP(UAD, UART, IRDA, SPDIF, UARTA, SPI4, SPDIF, 0x18, 21, 0x80, 6, 0xAC, 6), + PINGROUP(UCA, UART, UARTC, RSVD, GMI, RSVD, RSVD4, 0x18, 22, 0x84, 16, 0xAC, 8), + PINGROUP(UCB, UART, UARTC, PWM, GMI, RSVD, RSVD4, 0x18, 23, 0x84, 18, 0xAC, 10), + PINGROUP(UDA, BB, SPI1, RSVD, UARTD, ULPI, RSVD2, 0x20, 13, 0x80, 8, 0xB0, 16), + /* these pin groups only have pullup and pull down control */ + PINGROUP(CK32, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xB0, 14), + PINGROUP(DDRC, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xAC, 26), + PINGROUP(PMCA, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xB0, 4), + PINGROUP(PMCB, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xB0, 6), + PINGROUP(PMCC, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xB0, 8), + PINGROUP(PMCD, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xB0, 10), + PINGROUP(PMCE, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xB0, 12), + PINGROUP(XM2C, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 30), + PINGROUP(XM2D, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 28), +}; + +#ifdef CONFIG_PM +#define TRISTATE_REG_A 0x14 +#define TRISTATE_REG_NUM 4 +#define PIN_MUX_CTL_REG_A 0x80 +#define PIN_MUX_CTL_REG_NUM 8 +#define PULLUPDOWN_REG_A 0xa0 +#define PULLUPDOWN_REG_NUM 5 + +static u32 pinmux_reg[TRISTATE_REG_NUM + PIN_MUX_CTL_REG_NUM + + PULLUPDOWN_REG_NUM]; + +static inline unsigned long pg_readl(unsigned long offset) +{ + return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset)); +} + +static inline void pg_writel(unsigned long value, unsigned long offset) +{ + writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset)); +} + +void tegra_pinmux_suspend(void) +{ + unsigned int i; + u32 *ctx = pinmux_reg; + + for (i = 0; i < TRISTATE_REG_NUM; i++) + *ctx++ = pg_readl(TRISTATE_REG_A + i*4); + + for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++) + *ctx++ = pg_readl(PIN_MUX_CTL_REG_A + i*4); + + for (i = 0; i < PULLUPDOWN_REG_NUM; i++) + *ctx++ = pg_readl(PULLUPDOWN_REG_A + i*4); +} + +void tegra_pinmux_resume(void) +{ + unsigned int i; + u32 *ctx = pinmux_reg; + + for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++) + pg_writel(*ctx++, PIN_MUX_CTL_REG_A + i*4); + + for (i = 0; i < PULLUPDOWN_REG_NUM; i++) + pg_writel(*ctx++, PULLUPDOWN_REG_A + i*4); + + for (i = 0; i < TRISTATE_REG_NUM; i++) + pg_writel(*ctx++, TRISTATE_REG_A + i*4); +} +#endif diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c index 13ae10237e84..f80d507671bc 100644 --- a/arch/arm/mach-tegra/pinmux.c +++ b/arch/arm/mach-tegra/pinmux.c @@ -14,7 +14,8 @@ * */ - +#include <linux/init.h> +#include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/spinlock.h> @@ -23,21 +24,6 @@ #include <mach/iomap.h> #include <mach/pinmux.h> - -#define TEGRA_TRI_STATE(x) (0x14 + (4 * (x))) -#define TEGRA_PP_MUX_CTL(x) (0x80 + (4 * (x))) -#define TEGRA_PP_PU_PD(x) (0xa0 + (4 * (x))) - -#define REG_A 0 -#define REG_B 1 -#define REG_C 2 -#define REG_D 3 -#define REG_E 4 -#define REG_F 5 -#define REG_G 6 - -#define REG_N -1 - #define HSM_EN(reg) (((reg) >> 2) & 0x1) #define SCHMT_EN(reg) (((reg) >> 3) & 0x1) #define LPMD(reg) (((reg) >> 4) & 0x3) @@ -46,154 +32,8 @@ #define SLWR(reg) (((reg) >> 28) & 0x3) #define SLWF(reg) (((reg) >> 30) & 0x3) -struct tegra_pingroup_desc { - const char *name; - int funcs[4]; - s8 tri_reg; /* offset into the TRISTATE_REG_* register bank */ - s8 tri_bit; /* offset into the TRISTATE_REG_* register bit */ - s8 mux_reg; /* offset into the PIN_MUX_CTL_* register bank */ - s8 mux_bit; /* offset into the PIN_MUX_CTL_* register bit */ - s8 pupd_reg; /* offset into the PULL_UPDOWN_REG_* register bank */ - s8 pupd_bit; /* offset into the PULL_UPDOWN_REG_* register bit */ -}; - -#define PINGROUP(pg_name, f0, f1, f2, f3, \ - tri_r, tri_b, mux_r, mux_b, pupd_r, pupd_b) \ - [TEGRA_PINGROUP_ ## pg_name] = { \ - .name = #pg_name, \ - .funcs = { \ - TEGRA_MUX_ ## f0, \ - TEGRA_MUX_ ## f1, \ - TEGRA_MUX_ ## f2, \ - TEGRA_MUX_ ## f3, \ - }, \ - .tri_reg = REG_ ## tri_r, \ - .tri_bit = tri_b, \ - .mux_reg = REG_ ## mux_r, \ - .mux_bit = mux_b, \ - .pupd_reg = REG_ ## pupd_r, \ - .pupd_bit = pupd_b, \ - } - -static const struct tegra_pingroup_desc pingroups[TEGRA_MAX_PINGROUP] = { - PINGROUP(ATA, IDE, NAND, GMI, RSVD, A, 0, A, 24, A, 0), - PINGROUP(ATB, IDE, NAND, GMI, SDIO4, A, 1, A, 16, A, 2), - PINGROUP(ATC, IDE, NAND, GMI, SDIO4, A, 2, A, 22, A, 4), - PINGROUP(ATD, IDE, NAND, GMI, SDIO4, A, 3, A, 20, A, 6), - PINGROUP(ATE, IDE, NAND, GMI, RSVD, B, 25, A, 12, A, 8), - PINGROUP(CDEV1, OSC, PLLA_OUT, PLLM_OUT1, AUDIO_SYNC, A, 4, C, 2, C, 0), - PINGROUP(CDEV2, OSC, AHB_CLK, APB_CLK, PLLP_OUT4, A, 5, C, 4, C, 2), - PINGROUP(CRTP, CRT, RSVD, RSVD, RSVD, D, 14, G, 20, B, 24), - PINGROUP(CSUS, PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK, A, 6, C, 6, D, 24), - PINGROUP(DAP1, DAP1, RSVD, GMI, SDIO2, A, 7, C, 20, A, 10), - PINGROUP(DAP2, DAP2, TWC, RSVD, GMI, A, 8, C, 22, A, 12), - PINGROUP(DAP3, DAP3, RSVD, RSVD, RSVD, A, 9, C, 24, A, 14), - PINGROUP(DAP4, DAP4, RSVD, GMI, RSVD, A, 10, C, 26, A, 16), - PINGROUP(DDC, I2C2, RSVD, RSVD, RSVD, B, 31, C, 0, E, 28), - PINGROUP(DTA, RSVD, SDIO2, VI, RSVD, A, 11, B, 20, A, 18), - PINGROUP(DTB, RSVD, RSVD, VI, SPI1, A, 12, B, 22, A, 20), - PINGROUP(DTC, RSVD, RSVD, VI, RSVD, A, 13, B, 26, A, 22), - PINGROUP(DTD, RSVD, SDIO2, VI, RSVD, A, 14, B, 28, A, 24), - PINGROUP(DTE, RSVD, RSVD, VI, SPI1, A, 15, B, 30, A, 26), - PINGROUP(DTF, I2C3, RSVD, VI, RSVD, D, 12, G, 30, A, 28), - PINGROUP(GMA, UARTE, SPI3, GMI, SDIO4, A, 28, B, 0, E, 20), - PINGROUP(GMB, IDE, NAND, GMI, GMI_INT, B, 29, C, 28, E, 22), - PINGROUP(GMC, UARTD, SPI4, GMI, SFLASH, A, 29, B, 2, E, 24), - PINGROUP(GMD, RSVD, NAND, GMI, SFLASH, B, 30, C, 30, E, 26), - PINGROUP(GME, RSVD, DAP5, GMI, SDIO4, B, 0, D, 0, C, 24), - PINGROUP(GPU, PWM, UARTA, GMI, RSVD, A, 16, D, 4, B, 20), - PINGROUP(GPU7, RTCK, RSVD, RSVD, RSVD, D, 11, G, 28, B, 6), - PINGROUP(GPV, PCIE, RSVD, RSVD, RSVD, A, 17, D, 2, A, 30), - PINGROUP(HDINT, HDMI, RSVD, RSVD, RSVD, C, 23, B, 4, D, 22), - PINGROUP(I2CP, I2C, RSVD, RSVD, RSVD, A, 18, C, 8, B, 2), - PINGROUP(IRRX, UARTA, UARTB, GMI, SPI4, A, 20, C, 18, C, 22), - PINGROUP(IRTX, UARTA, UARTB, GMI, SPI4, A, 19, C, 16, C, 20), - PINGROUP(KBCA, KBC, NAND, SDIO2, EMC_TEST0_DLL, A, 22, C, 10, B, 8), - PINGROUP(KBCB, KBC, NAND, SDIO2, MIO, A, 21, C, 12, B, 10), - PINGROUP(KBCC, KBC, NAND, TRACE, EMC_TEST1_DLL, B, 26, C, 14, B, 12), - PINGROUP(KBCD, KBC, NAND, SDIO2, MIO, D, 10, G, 26, B, 14), - PINGROUP(KBCE, KBC, NAND, OWR, RSVD, A, 26, A, 28, E, 2), - PINGROUP(KBCF, KBC, NAND, TRACE, MIO, A, 27, A, 26, E, 0), - PINGROUP(LCSN, DISPLAYA, DISPLAYB, SPI3, RSVD, C, 31, E, 12, D, 20), - PINGROUP(LD0, DISPLAYA, DISPLAYB, XIO, RSVD, C, 0, F, 0, D, 12), - PINGROUP(LD1, DISPLAYA, DISPLAYB, XIO, RSVD, C, 1, F, 2, D, 12), - PINGROUP(LD10, DISPLAYA, DISPLAYB, XIO, RSVD, C, 10, F, 20, D, 12), - PINGROUP(LD11, DISPLAYA, DISPLAYB, XIO, RSVD, C, 11, F, 22, D, 12), - PINGROUP(LD12, DISPLAYA, DISPLAYB, XIO, RSVD, C, 12, F, 24, D, 12), - PINGROUP(LD13, DISPLAYA, DISPLAYB, XIO, RSVD, C, 13, F, 26, D, 12), - PINGROUP(LD14, DISPLAYA, DISPLAYB, XIO, RSVD, C, 14, F, 28, D, 12), - PINGROUP(LD15, DISPLAYA, DISPLAYB, XIO, RSVD, C, 15, F, 30, D, 12), - PINGROUP(LD16, DISPLAYA, DISPLAYB, XIO, RSVD, C, 16, G, 0, D, 12), - PINGROUP(LD17, DISPLAYA, DISPLAYB, RSVD, RSVD, C, 17, G, 2, D, 12), - PINGROUP(LD2, DISPLAYA, DISPLAYB, XIO, RSVD, C, 2, F, 4, D, 12), - PINGROUP(LD3, DISPLAYA, DISPLAYB, XIO, RSVD, C, 3, F, 6, D, 12), - PINGROUP(LD4, DISPLAYA, DISPLAYB, XIO, RSVD, C, 4, F, 8, D, 12), - PINGROUP(LD5, DISPLAYA, DISPLAYB, XIO, RSVD, C, 5, F, 10, D, 12), - PINGROUP(LD6, DISPLAYA, DISPLAYB, XIO, RSVD, C, 6, F, 12, D, 12), - PINGROUP(LD7, DISPLAYA, DISPLAYB, XIO, RSVD, C, 7, F, 14, D, 12), - PINGROUP(LD8, DISPLAYA, DISPLAYB, XIO, RSVD, C, 8, F, 16, D, 12), - PINGROUP(LD9, DISPLAYA, DISPLAYB, XIO, RSVD, C, 9, F, 18, D, 12), - PINGROUP(LDC, DISPLAYA, DISPLAYB, RSVD, RSVD, C, 30, E, 14, D, 20), - PINGROUP(LDI, DISPLAYA, DISPLAYB, RSVD, RSVD, D, 6, G, 16, D, 18), - PINGROUP(LHP0, DISPLAYA, DISPLAYB, RSVD, RSVD, C, 18, G, 10, D, 16), - PINGROUP(LHP1, DISPLAYA, DISPLAYB, RSVD, RSVD, C, 19, G, 4, D, 14), - PINGROUP(LHP2, DISPLAYA, DISPLAYB, RSVD, RSVD, C, 20, G, 6, D, 14), - PINGROUP(LHS, DISPLAYA, DISPLAYB, XIO, RSVD, D, 7, E, 22, D, 22), - PINGROUP(LM0, DISPLAYA, DISPLAYB, SPI3, RSVD, C, 24, E, 26, D, 22), - PINGROUP(LM1, DISPLAYA, DISPLAYB, RSVD, CRT, C, 25, E, 28, D, 22), - PINGROUP(LPP, DISPLAYA, DISPLAYB, RSVD, RSVD, D, 8, G, 14, D, 18), - PINGROUP(LPW0, DISPLAYA, DISPLAYB, SPI3, HDMI, D, 3, E, 0, D, 20), - PINGROUP(LPW1, DISPLAYA, DISPLAYB, RSVD, RSVD, D, 4, E, 2, D, 20), - PINGROUP(LPW2, DISPLAYA, DISPLAYB, SPI3, HDMI, D, 5, E, 4, D, 20), - PINGROUP(LSC0, DISPLAYA, DISPLAYB, XIO, RSVD, C, 27, E, 18, D, 22), - PINGROUP(LSC1, DISPLAYA, DISPLAYB, SPI3, HDMI, C, 28, E, 20, D, 20), - PINGROUP(LSCK, DISPLAYA, DISPLAYB, SPI3, HDMI, C, 29, E, 16, D, 20), - PINGROUP(LSDA, DISPLAYA, DISPLAYB, SPI3, HDMI, D, 1, E, 8, D, 20), - PINGROUP(LSDI, DISPLAYA, DISPLAYB, SPI3, RSVD, D, 2, E, 6, D, 20), - PINGROUP(LSPI, DISPLAYA, DISPLAYB, XIO, HDMI, D, 0, E, 10, D, 22), - PINGROUP(LVP0, DISPLAYA, DISPLAYB, RSVD, RSVD, C, 21, E, 30, D, 22), - PINGROUP(LVP1, DISPLAYA, DISPLAYB, RSVD, RSVD, C, 22, G, 8, D, 16), - PINGROUP(LVS, DISPLAYA, DISPLAYB, XIO, RSVD, C, 26, E, 24, D, 22), - PINGROUP(OWC, OWR, RSVD, RSVD, RSVD, A, 31, B, 8, E, 30), - PINGROUP(PMC, PWR_ON, PWR_INTR, RSVD, RSVD, A, 23, G, 18, N, -1), - PINGROUP(PTA, I2C2, HDMI, GMI, RSVD, A, 24, G, 22, B, 4), - PINGROUP(RM, I2C, RSVD, RSVD, RSVD, A, 25, A, 14, B, 0), - PINGROUP(SDB, UARTA, PWM, SDIO3, SPI2, D, 15, D, 10, N, -1), - PINGROUP(SDC, PWM, TWC, SDIO3, SPI3, B, 1, D, 12, D, 28), - PINGROUP(SDD, UARTA, PWM, SDIO3, SPI3, B, 2, D, 14, D, 30), - PINGROUP(SDIO1, SDIO1, RSVD, UARTE, UARTA, A, 30, A, 30, E, 18), - PINGROUP(SLXA, PCIE, SPI4, SDIO3, SPI2, B, 3, B, 6, B, 22), - PINGROUP(SLXC, SPDIF, SPI4, SDIO3, SPI2, B, 5, B, 10, B, 26), - PINGROUP(SLXD, SPDIF, SPI4, SDIO3, SPI2, B, 6, B, 12, B, 28), - PINGROUP(SLXK, PCIE, SPI4, SDIO3, SPI2, B, 7, B, 14, B, 30), - PINGROUP(SPDI, SPDIF, RSVD, I2C, SDIO2, B, 8, D, 8, B, 16), - PINGROUP(SPDO, SPDIF, RSVD, I2C, SDIO2, B, 9, D, 6, B, 18), - PINGROUP(SPIA, SPI1, SPI2, SPI3, GMI, B, 10, D, 30, C, 4), - PINGROUP(SPIB, SPI1, SPI2, SPI3, GMI, B, 11, D, 28, C, 6), - PINGROUP(SPIC, SPI1, SPI2, SPI3, GMI, B, 12, D, 26, C, 8), - PINGROUP(SPID, SPI2, SPI1, SPI2_ALT, GMI, B, 13, D, 24, C, 10), - PINGROUP(SPIE, SPI2, SPI1, SPI2_ALT, GMI, B, 14, D, 22, C, 12), - PINGROUP(SPIF, SPI3, SPI1, SPI2, RSVD, B, 15, D, 20, C, 14), - PINGROUP(SPIG, SPI3, SPI2, SPI2_ALT, I2C, B, 16, D, 18, C, 16), - PINGROUP(SPIH, SPI3, SPI2, SPI2_ALT, I2C, B, 17, D, 16, C, 18), - PINGROUP(UAA, SPI3, MIPI_HS, UARTA, ULPI, B, 18, A, 0, D, 0), - PINGROUP(UAB, SPI2, MIPI_HS, UARTA, ULPI, B, 19, A, 2, D, 2), - PINGROUP(UAC, OWR, RSVD, RSVD, RSVD, B, 20, A, 4, D, 4), - PINGROUP(UAD, IRDA, SPDIF, UARTA, SPI4, B, 21, A, 6, D, 6), - PINGROUP(UCA, UARTC, RSVD, GMI, RSVD, B, 22, B, 16, D, 8), - PINGROUP(UCB, UARTC, PWM, GMI, RSVD, B, 23, B, 18, D, 10), - PINGROUP(UDA, SPI1, RSVD, UARTD, ULPI, D, 13, A, 8, E, 16), - /* these pin groups only have pullup and pull down control */ - PINGROUP(CK32, RSVD, RSVD, RSVD, RSVD, N, -1, N, -1, E, 14), - PINGROUP(DDRC, RSVD, RSVD, RSVD, RSVD, N, -1, N, -1, D, 26), - PINGROUP(PMCA, RSVD, RSVD, RSVD, RSVD, N, -1, N, -1, E, 4), - PINGROUP(PMCB, RSVD, RSVD, RSVD, RSVD, N, -1, N, -1, E, 6), - PINGROUP(PMCC, RSVD, RSVD, RSVD, RSVD, N, -1, N, -1, E, 8), - PINGROUP(PMCD, RSVD, RSVD, RSVD, RSVD, N, -1, N, -1, E, 10), - PINGROUP(PMCE, RSVD, RSVD, RSVD, RSVD, N, -1, N, -1, E, 12), - PINGROUP(XM2C, RSVD, RSVD, RSVD, RSVD, N, -1, N, -1, C, 30), - PINGROUP(XM2D, RSVD, RSVD, RSVD, RSVD, N, -1, N, -1, C, 28), -}; +static const struct tegra_pingroup_desc *const pingroups = tegra_soc_pingroups; +static const struct tegra_drive_pingroup_desc *const drive_pingroups = tegra_soc_drive_pingroups; static char *tegra_mux_names[TEGRA_MAX_MUX] = { [TEGRA_MUX_AHB_CLK] = "AHB_CLK", @@ -256,48 +96,7 @@ static char *tegra_mux_names[TEGRA_MAX_MUX] = { [TEGRA_MUX_VI] = "VI", [TEGRA_MUX_VI_SENSOR_CLK] = "VI_SENSOR_CLK", [TEGRA_MUX_XIO] = "XIO", -}; - -struct tegra_drive_pingroup_desc { - const char *name; - s16 reg; -}; - -#define DRIVE_PINGROUP(pg_name, r) \ - [TEGRA_DRIVE_PINGROUP_ ## pg_name] = { \ - .name = #pg_name, \ - .reg = r \ - } - -static const struct tegra_drive_pingroup_desc drive_pingroups[TEGRA_MAX_PINGROUP] = { - DRIVE_PINGROUP(AO1, 0x868), - DRIVE_PINGROUP(AO2, 0x86c), - DRIVE_PINGROUP(AT1, 0x870), - DRIVE_PINGROUP(AT2, 0x874), - DRIVE_PINGROUP(CDEV1, 0x878), - DRIVE_PINGROUP(CDEV2, 0x87c), - DRIVE_PINGROUP(CSUS, 0x880), - DRIVE_PINGROUP(DAP1, 0x884), - DRIVE_PINGROUP(DAP2, 0x888), - DRIVE_PINGROUP(DAP3, 0x88c), - DRIVE_PINGROUP(DAP4, 0x890), - DRIVE_PINGROUP(DBG, 0x894), - DRIVE_PINGROUP(LCD1, 0x898), - DRIVE_PINGROUP(LCD2, 0x89c), - DRIVE_PINGROUP(SDMMC2, 0x8a0), - DRIVE_PINGROUP(SDMMC3, 0x8a4), - DRIVE_PINGROUP(SPI, 0x8a8), - DRIVE_PINGROUP(UAA, 0x8ac), - DRIVE_PINGROUP(UAB, 0x8b0), - DRIVE_PINGROUP(UART2, 0x8b4), - DRIVE_PINGROUP(UART3, 0x8b8), - DRIVE_PINGROUP(VI1, 0x8bc), - DRIVE_PINGROUP(VI2, 0x8c0), - DRIVE_PINGROUP(XM2A, 0x8c4), - DRIVE_PINGROUP(XM2C, 0x8c8), - DRIVE_PINGROUP(XM2D, 0x8cc), - DRIVE_PINGROUP(XM2CLK, 0x8d0), - DRIVE_PINGROUP(MEMCOMP, 0x8d4), + [TEGRA_MUX_SAFE] = "<safe>", }; static const char *tegra_drive_names[TEGRA_MAX_DRIVE] = { @@ -381,22 +180,27 @@ static inline void pg_writel(unsigned long value, unsigned long offset) writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset)); } -int tegra_pinmux_set_func(enum tegra_pingroup pg, enum tegra_mux_func func) +static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config) { int mux = -1; int i; unsigned long reg; unsigned long flags; + enum tegra_pingroup pg = config->pingroup; + enum tegra_mux_func func = config->func; if (pg < 0 || pg >= TEGRA_MAX_PINGROUP) return -ERANGE; - if (pingroups[pg].mux_reg == REG_N) + if (pingroups[pg].mux_reg < 0) return -EINVAL; if (func < 0) return -ERANGE; + if (func == TEGRA_MUX_SAFE) + func = pingroups[pg].func_safe; + if (func & TEGRA_MUX_RSVD) { mux = func & 0x3; } else { @@ -413,10 +217,10 @@ int tegra_pinmux_set_func(enum tegra_pingroup pg, enum tegra_mux_func func) spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(TEGRA_PP_MUX_CTL(pingroups[pg].mux_reg)); + reg = pg_readl(pingroups[pg].mux_reg); reg &= ~(0x3 << pingroups[pg].mux_bit); reg |= mux << pingroups[pg].mux_bit; - pg_writel(reg, TEGRA_PP_MUX_CTL(pingroups[pg].mux_reg)); + pg_writel(reg, pingroups[pg].mux_reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -432,16 +236,16 @@ int tegra_pinmux_set_tristate(enum tegra_pingroup pg, if (pg < 0 || pg >= TEGRA_MAX_PINGROUP) return -ERANGE; - if (pingroups[pg].tri_reg == REG_N) + if (pingroups[pg].tri_reg < 0) return -EINVAL; spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(TEGRA_TRI_STATE(pingroups[pg].tri_reg)); + reg = pg_readl(pingroups[pg].tri_reg); reg &= ~(0x1 << pingroups[pg].tri_bit); if (tristate) reg |= 1 << pingroups[pg].tri_bit; - pg_writel(reg, TEGRA_TRI_STATE(pingroups[pg].tri_reg)); + pg_writel(reg, pingroups[pg].tri_reg); spin_unlock_irqrestore(&mux_lock, flags); @@ -457,7 +261,7 @@ int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg, if (pg < 0 || pg >= TEGRA_MAX_PINGROUP) return -ERANGE; - if (pingroups[pg].pupd_reg == REG_N) + if (pingroups[pg].pupd_reg < 0) return -EINVAL; if (pupd != TEGRA_PUPD_NORMAL && @@ -468,38 +272,39 @@ int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg, spin_lock_irqsave(&mux_lock, flags); - reg = pg_readl(TEGRA_PP_PU_PD(pingroups[pg].pupd_reg)); + reg = pg_readl(pingroups[pg].pupd_reg); reg &= ~(0x3 << pingroups[pg].pupd_bit); reg |= pupd << pingroups[pg].pupd_bit; - pg_writel(reg, TEGRA_PP_PU_PD(pingroups[pg].pupd_reg)); + pg_writel(reg, pingroups[pg].pupd_reg); spin_unlock_irqrestore(&mux_lock, flags); return 0; } -void tegra_pinmux_config_pingroup(enum tegra_pingroup pingroup, - enum tegra_mux_func func, - enum tegra_pullupdown pupd, - enum tegra_tristate tristate) +static void tegra_pinmux_config_pingroup(const struct tegra_pingroup_config *config) { + enum tegra_pingroup pingroup = config->pingroup; + enum tegra_mux_func func = config->func; + enum tegra_pullupdown pupd = config->pupd; + enum tegra_tristate tristate = config->tristate; int err; - if (pingroups[pingroup].mux_reg != REG_N) { - err = tegra_pinmux_set_func(pingroup, func); + if (pingroups[pingroup].mux_reg >= 0) { + err = tegra_pinmux_set_func(config); if (err < 0) pr_err("pinmux: can't set pingroup %s func to %s: %d\n", pingroup_name(pingroup), func_name(func), err); } - if (pingroups[pingroup].pupd_reg != REG_N) { + if (pingroups[pingroup].pupd_reg >= 0) { err = tegra_pinmux_set_pullupdown(pingroup, pupd); if (err < 0) pr_err("pinmux: can't set pingroup %s pullupdown to %s: %d\n", pingroup_name(pingroup), pupd_name(pupd), err); } - if (pingroups[pingroup].tri_reg != REG_N) { + if (pingroups[pingroup].tri_reg >= 0) { err = tegra_pinmux_set_tristate(pingroup, tristate); if (err < 0) pr_err("pinmux: can't set pingroup %s tristate to %s: %d\n", @@ -507,17 +312,12 @@ void tegra_pinmux_config_pingroup(enum tegra_pingroup pingroup, } } - - -void tegra_pinmux_config_table(struct tegra_pingroup_config *config, int len) +void tegra_pinmux_config_table(const struct tegra_pingroup_config *config, int len) { int i; for (i = 0; i < len; i++) - tegra_pinmux_config_pingroup(config[i].pingroup, - config[i].func, - config[i].pupd, - config[i].tristate); + tegra_pinmux_config_pingroup(&config[i]); } static const char *drive_pinmux_name(enum tegra_drive_pingroup pg) @@ -784,6 +584,86 @@ void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config, config[i].slew_falling); } +void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *config, + int len) +{ + int i; + struct tegra_pingroup_config c; + + for (i = 0; i < len; i++) { + int err; + c = config[i]; + if (c.pingroup < 0 || c.pingroup >= TEGRA_MAX_PINGROUP) { + WARN_ON(1); + continue; + } + c.func = pingroups[c.pingroup].func_safe; + err = tegra_pinmux_set_func(&c); + if (err < 0) + pr_err("%s: tegra_pinmux_set_func returned %d setting " + "%s to %s\n", __func__, err, + pingroup_name(c.pingroup), func_name(c.func)); + } +} + +void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config, + int len) +{ + int i; + + for (i = 0; i < len; i++) { + int err; + if (config[i].pingroup < 0 || + config[i].pingroup >= TEGRA_MAX_PINGROUP) { + WARN_ON(1); + continue; + } + err = tegra_pinmux_set_func(&config[i]); + if (err < 0) + pr_err("%s: tegra_pinmux_set_func returned %d setting " + "%s to %s\n", __func__, err, + pingroup_name(config[i].pingroup), + func_name(config[i].func)); + } +} + +void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *config, + int len, enum tegra_tristate tristate) +{ + int i; + int err; + enum tegra_pingroup pingroup; + + for (i = 0; i < len; i++) { + pingroup = config[i].pingroup; + if (pingroups[pingroup].tri_reg >= 0) { + err = tegra_pinmux_set_tristate(pingroup, tristate); + if (err < 0) + pr_err("pinmux: can't set pingroup %s tristate" + " to %s: %d\n", pingroup_name(pingroup), + tri_name(tristate), err); + } + } +} + +void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config, + int len, enum tegra_pullupdown pupd) +{ + int i; + int err; + enum tegra_pingroup pingroup; + + for (i = 0; i < len; i++) { + pingroup = config[i].pingroup; + if (pingroups[pingroup].pupd_reg >= 0) { + err = tegra_pinmux_set_pullupdown(pingroup, pupd); + if (err < 0) + pr_err("pinmux: can't set pingroup %s pullupdown" + " to %s: %d\n", pingroup_name(pingroup), + pupd_name(pupd), err); + } + } +} #ifdef CONFIG_DEBUG_FS @@ -812,11 +692,11 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused) len = strlen(pingroups[i].name); dbg_pad_field(s, 5 - len); - if (pingroups[i].mux_reg == REG_N) { + if (pingroups[i].mux_reg < 0) { seq_printf(s, "TEGRA_MUX_NONE"); len = strlen("NONE"); } else { - mux = (pg_readl(TEGRA_PP_MUX_CTL(pingroups[i].mux_reg)) >> + mux = (pg_readl(pingroups[i].mux_reg) >> pingroups[i].mux_bit) & 0x3; if (pingroups[i].funcs[mux] == TEGRA_MUX_RSVD) { seq_printf(s, "TEGRA_MUX_RSVD%1lu", mux+1); @@ -829,21 +709,21 @@ static int dbg_pinmux_show(struct seq_file *s, void *unused) } dbg_pad_field(s, 13-len); - if (pingroups[i].mux_reg == REG_N) { + if (pingroups[i].pupd_reg < 0) { seq_printf(s, "TEGRA_PUPD_NORMAL"); len = strlen("NORMAL"); } else { - pupd = (pg_readl(TEGRA_PP_PU_PD(pingroups[i].pupd_reg)) >> + pupd = (pg_readl(pingroups[i].pupd_reg) >> pingroups[i].pupd_bit) & 0x3; seq_printf(s, "TEGRA_PUPD_%s", pupd_name(pupd)); len = strlen(pupd_name(pupd)); } dbg_pad_field(s, 9 - len); - if (pingroups[i].tri_reg == REG_N) { + if (pingroups[i].tri_reg < 0) { seq_printf(s, "TEGRA_TRI_NORMAL"); } else { - tri = (pg_readl(TEGRA_TRI_STATE(pingroups[i].tri_reg)) >> + tri = (pg_readl(pingroups[i].tri_reg) >> pingroups[i].tri_bit) & 0x1; seq_printf(s, "TEGRA_TRI_%s", tri_name(tri)); diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index 426163231fff..ae3b308e22a4 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -30,14 +30,21 @@ #include <mach/iomap.h> #include "clock.h" +#include "fuse.h" +#include "tegra2_dvfs.h" #define RST_DEVICES 0x004 #define RST_DEVICES_SET 0x300 #define RST_DEVICES_CLR 0x304 +#define RST_DEVICES_NUM 3 #define CLK_OUT_ENB 0x010 #define CLK_OUT_ENB_SET 0x320 #define CLK_OUT_ENB_CLR 0x324 +#define CLK_OUT_ENB_NUM 3 + +#define CLK_MASK_ARM 0x44 +#define MISC_CLK_ENB 0x48 #define OSC_CTRL 0x50 #define OSC_CTRL_OSC_FREQ_MASK (3<<30) @@ -45,6 +52,7 @@ #define OSC_CTRL_OSC_FREQ_19_2MHZ (1<<30) #define OSC_CTRL_OSC_FREQ_12MHZ (2<<30) #define OSC_CTRL_OSC_FREQ_26MHZ (3<<30) +#define OSC_CTRL_MASK 0x3f2 #define OSC_FREQ_DET 0x58 #define OSC_FREQ_DET_TRIG (1<<31) @@ -53,10 +61,17 @@ #define OSC_FREQ_DET_BUSY (1<<31) #define OSC_FREQ_DET_CNT_MASK 0xFFFF +#define PERIPH_CLK_SOURCE_I2S1 0x100 +#define PERIPH_CLK_SOURCE_EMC 0x19c +#define PERIPH_CLK_SOURCE_OSC 0x1fc +#define PERIPH_CLK_SOURCE_NUM \ + ((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4) + #define PERIPH_CLK_SOURCE_MASK (3<<30) #define PERIPH_CLK_SOURCE_SHIFT 30 #define PERIPH_CLK_SOURCE_ENABLE (1<<28) -#define PERIPH_CLK_SOURCE_DIV_MASK 0xFF +#define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF +#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF #define PERIPH_CLK_SOURCE_DIV_SHIFT 0 #define PLL_BASE 0x0 @@ -79,8 +94,9 @@ #define PLL_OUT_RESET_DISABLE (1<<0) #define PLL_MISC(c) (((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc) +#define PLL_MISC_LOCK_ENABLE(c) (((c)->flags & PLLU) ? (1<<22) : (1<<18)) + #define PLL_MISC_DCCON_SHIFT 20 -#define PLL_MISC_LOCK_ENABLE (1<<18) #define PLL_MISC_CPCON_SHIFT 8 #define PLL_MISC_CPCON_MASK (0xF<<PLL_MISC_CPCON_SHIFT) #define PLL_MISC_LFCON_SHIFT 4 @@ -88,10 +104,14 @@ #define PLL_MISC_VCOCON_SHIFT 0 #define PLL_MISC_VCOCON_MASK (0xF<<PLL_MISC_VCOCON_SHIFT) +#define PLLU_BASE_POST_DIV (1<<20) + #define PLLD_MISC_CLKENABLE (1<<30) #define PLLD_MISC_DIV_RST (1<<23) #define PLLD_MISC_DCCON_SHIFT 12 +#define PLLE_MISC_READY (1 << 15) + #define PERIPH_CLK_TO_ENB_REG(c) ((c->clk_num / 32) * 4) #define PERIPH_CLK_TO_ENB_SET_REG(c) ((c->clk_num / 32) * 8) #define PERIPH_CLK_TO_ENB_BIT(c) (1 << (c->clk_num % 32)) @@ -143,30 +163,37 @@ unsigned long clk_measure_input_freq(void) } } -static int clk_div71_get_divider(struct clk *c, unsigned long rate) +static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate) { - unsigned long divider_u71; + s64 divider_u71 = parent_rate * 2; + divider_u71 += rate - 1; + do_div(divider_u71, rate); - divider_u71 = DIV_ROUND_UP(c->rate * 2, rate); + if (divider_u71 - 2 < 0) + return 0; - if (divider_u71 - 2 > 255 || divider_u71 - 2 < 0) + if (divider_u71 - 2 > 255) return -EINVAL; return divider_u71 - 2; } -static unsigned long tegra2_clk_recalculate_rate(struct clk *c) +static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate) { - unsigned long rate; - rate = c->parent->rate; + s64 divider_u16; - if (c->mul != 0 && c->div != 0) - c->rate = rate * c->mul / c->div; - else - c->rate = rate; - return c->rate; -} + divider_u16 = parent_rate; + divider_u16 += rate - 1; + do_div(divider_u16, rate); + + if (divider_u16 - 1 < 0) + return 0; + if (divider_u16 - 1 > 255) + return -EINVAL; + + return divider_u16 - 1; +} /* clk_m functions */ static unsigned long tegra2_clk_m_autodetect_rate(struct clk *c) @@ -244,7 +271,6 @@ static void tegra2_super_clk_init(struct clk *c) } BUG_ON(sel->input == NULL); c->parent = sel->input; - tegra2_clk_recalculate_rate(c); } static int tegra2_super_clk_enable(struct clk *c) @@ -266,6 +292,7 @@ static int tegra2_super_clk_set_parent(struct clk *c, struct clk *p) u32 val; const struct clk_mux_sel *sel; int shift; + val = clk_readl(c->reg + SUPER_CLK_MUX);; BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) && ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE)); @@ -273,11 +300,18 @@ static int tegra2_super_clk_set_parent(struct clk *c, struct clk *p) SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT; for (sel = c->inputs; sel->input != NULL; sel++) { if (sel->input == p) { - clk_reparent(c, p); val &= ~(SUPER_SOURCE_MASK << shift); val |= sel->value << shift; + + if (c->refcnt) + clk_enable_locked(p); + clk_writel(val, c->reg); - c->rate = c->parent->rate; + + if (c->refcnt && c->parent) + clk_disable_locked(c->parent); + + clk_reparent(c, p); return 0; } } @@ -289,7 +323,61 @@ static struct clk_ops tegra_super_ops = { .enable = tegra2_super_clk_enable, .disable = tegra2_super_clk_disable, .set_parent = tegra2_super_clk_set_parent, - .recalculate_rate = tegra2_clk_recalculate_rate, +}; + +/* virtual cpu clock functions */ +/* some clocks can not be stopped (cpu, memory bus) while the SoC is running. + To change the frequency of these clocks, the parent pll may need to be + reprogrammed, so the clock must be moved off the pll, the pll reprogrammed, + and then the clock moved back to the pll. To hide this sequence, a virtual + clock handles it. + */ +static void tegra2_cpu_clk_init(struct clk *c) +{ +} + +static int tegra2_cpu_clk_enable(struct clk *c) +{ + return 0; +} + +static void tegra2_cpu_clk_disable(struct clk *c) +{ + pr_debug("%s on clock %s\n", __func__, c->name); + + /* oops - don't disable the CPU clock! */ + BUG(); +} + +static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate) +{ + int ret; + ret = clk_set_parent_locked(c->parent, c->backup); + if (ret) { + pr_err("Failed to switch cpu to clock %s\n", c->backup->name); + return ret; + } + + ret = clk_set_rate_locked(c->main, rate); + if (ret) { + pr_err("Failed to change cpu pll to %lu\n", rate); + return ret; + } + + ret = clk_set_parent_locked(c->parent, c->main); + if (ret) { + pr_err("Failed to switch cpu to clock %s\n", c->main->name); + return ret; + } + + return 0; +} + +static struct clk_ops tegra_cpu_ops = { + .init = tegra2_cpu_clk_init, + .enable = tegra2_cpu_clk_enable, + .disable = tegra2_cpu_clk_disable, + .set_rate = tegra2_cpu_clk_set_rate, }; /* bus clock functions */ @@ -299,7 +387,6 @@ static void tegra2_bus_clk_init(struct clk *c) c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON; c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1; c->mul = 1; - tegra2_clk_recalculate_rate(c); } static int tegra2_bus_clk_enable(struct clk *c) @@ -340,27 +427,15 @@ static struct clk_ops tegra_bus_ops = { .enable = tegra2_bus_clk_enable, .disable = tegra2_bus_clk_disable, .set_rate = tegra2_bus_clk_set_rate, - .recalculate_rate = tegra2_clk_recalculate_rate, }; /* PLL Functions */ -static unsigned long tegra2_pll_clk_recalculate_rate(struct clk *c) -{ - u64 rate; - rate = c->parent->rate; - rate *= c->n; - do_div(rate, c->m); - if (c->p == 2) - rate >>= 1; - c->rate = rate; - return c->rate; -} - static int tegra2_pll_clk_wait_for_lock(struct clk *c) { ktime_t before; before = ktime_get(); + while (!(clk_readl(c->reg + PLL_BASE) & PLL_BASE_LOCK)) { if (ktime_us_delta(ktime_get(), before) > 5000) { pr_err("Timed out waiting for lock bit on pll %s", @@ -380,24 +455,19 @@ static void tegra2_pll_clk_init(struct clk *c) if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) { pr_warning("Clock %s has unknown fixed frequency\n", c->name); - c->n = 1; - c->m = 0; - c->p = 1; + c->mul = 1; + c->div = 1; } else if (val & PLL_BASE_BYPASS) { - c->n = 1; - c->m = 1; - c->p = 1; + c->mul = 1; + c->div = 1; } else { - c->n = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT; - c->m = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT; - c->p = (val & PLL_BASE_DIVP_MASK) ? 2 : 1; + c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT; + c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT; + if (c->flags & PLLU) + c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2; + else + c->div *= (val & PLL_BASE_DIVP_MASK) ? 2 : 1; } - - val = clk_readl(c->reg + PLL_MISC(c)); - if (c->flags & PLL_HAS_CPCON) - c->cpcon = (val & PLL_MISC_CPCON_MASK) >> PLL_MISC_CPCON_SHIFT; - - tegra2_pll_clk_recalculate_rate(c); } static int tegra2_pll_clk_enable(struct clk *c) @@ -411,7 +481,7 @@ static int tegra2_pll_clk_enable(struct clk *c) clk_writel(val, c->reg + PLL_BASE); val = clk_readl(c->reg + PLL_MISC(c)); - val |= PLL_MISC_LOCK_ENABLE; + val |= PLL_MISC_LOCK_ENABLE(c); clk_writel(val, c->reg + PLL_MISC(c)); tegra2_pll_clk_wait_for_lock(c); @@ -441,33 +511,36 @@ static int tegra2_pll_clk_set_rate(struct clk *c, unsigned long rate) input_rate = c->parent->rate; for (sel = c->pll_table; sel->input_rate != 0; sel++) { if (sel->input_rate == input_rate && sel->output_rate == rate) { - c->n = sel->n; - c->m = sel->m; - c->p = sel->p; - c->cpcon = sel->cpcon; + c->mul = sel->n; + c->div = sel->m * sel->p; val = clk_readl(c->reg + PLL_BASE); if (c->flags & PLL_FIXED) val |= PLL_BASE_OVERRIDE; val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK | PLL_BASE_DIVM_MASK); - val |= (c->m << PLL_BASE_DIVM_SHIFT) | - (c->n << PLL_BASE_DIVN_SHIFT); - BUG_ON(c->p > 2); - if (c->p == 2) - val |= 1 << PLL_BASE_DIVP_SHIFT; + val |= (sel->m << PLL_BASE_DIVM_SHIFT) | + (sel->n << PLL_BASE_DIVN_SHIFT); + BUG_ON(sel->p < 1 || sel->p > 2); + if (c->flags & PLLU) { + if (sel->p == 1) + val |= PLLU_BASE_POST_DIV; + } else { + if (sel->p == 2) + val |= 1 << PLL_BASE_DIVP_SHIFT; + } clk_writel(val, c->reg + PLL_BASE); if (c->flags & PLL_HAS_CPCON) { - val = c->cpcon << PLL_MISC_CPCON_SHIFT; - val |= PLL_MISC_LOCK_ENABLE; + val = clk_readl(c->reg + PLL_MISC(c)); + val &= ~PLL_MISC_CPCON_MASK; + val |= sel->cpcon << PLL_MISC_CPCON_SHIFT; clk_writel(val, c->reg + PLL_MISC(c)); } if (c->state == ON) tegra2_pll_clk_enable(c); - c->rate = rate; return 0; } } @@ -479,7 +552,46 @@ static struct clk_ops tegra_pll_ops = { .enable = tegra2_pll_clk_enable, .disable = tegra2_pll_clk_disable, .set_rate = tegra2_pll_clk_set_rate, - .recalculate_rate = tegra2_pll_clk_recalculate_rate, +}; + +static void tegra2_pllx_clk_init(struct clk *c) +{ + tegra2_pll_clk_init(c); + + if (tegra_sku_id() == 7) + c->max_rate = 750000000; +} + +static struct clk_ops tegra_pllx_ops = { + .init = tegra2_pllx_clk_init, + .enable = tegra2_pll_clk_enable, + .disable = tegra2_pll_clk_disable, + .set_rate = tegra2_pll_clk_set_rate, +}; + +static int tegra2_plle_clk_enable(struct clk *c) +{ + u32 val; + + pr_debug("%s on clock %s\n", __func__, c->name); + + mdelay(1); + + val = clk_readl(c->reg + PLL_BASE); + if (!(val & PLLE_MISC_READY)) + return -EBUSY; + + val = clk_readl(c->reg + PLL_BASE); + val |= PLL_BASE_ENABLE | PLL_BASE_BYPASS; + clk_writel(val, c->reg + PLL_BASE); + + return 0; +} + +static struct clk_ops tegra_plle_ops = { + .init = tegra2_pll_clk_init, + .enable = tegra2_plle_clk_enable, + .set_rate = tegra2_pll_clk_set_rate, }; /* Clock divider ops */ @@ -503,8 +615,6 @@ static void tegra2_pll_div_clk_init(struct clk *c) c->div = 1; c->mul = 1; } - - tegra2_clk_recalculate_rate(c); } static int tegra2_pll_div_clk_enable(struct clk *c) @@ -565,7 +675,7 @@ static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate) int divider_u71; pr_debug("%s: %s %lu\n", __func__, c->name, rate); if (c->flags & DIV_U71) { - divider_u71 = clk_div71_get_divider(c->parent, rate); + divider_u71 = clk_div71_get_divider(c->parent->rate, rate); if (divider_u71 >= 0) { val = clk_readl(c->reg); new_val = val >> c->reg_shift; @@ -580,25 +690,37 @@ static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate) clk_writel(val, c->reg); c->div = divider_u71 + 2; c->mul = 2; - tegra2_clk_recalculate_rate(c); return 0; } } else if (c->flags & DIV_2) { - if (c->parent->rate == rate * 2) { - c->rate = rate; + if (c->parent->rate == rate * 2) return 0; - } } return -EINVAL; } +static long tegra2_pll_div_clk_round_rate(struct clk *c, unsigned long rate) +{ + int divider; + pr_debug("%s: %s %lu\n", __func__, c->name, rate); + + if (c->flags & DIV_U71) { + divider = clk_div71_get_divider(c->parent->rate, rate); + if (divider < 0) + return divider; + return c->parent->rate * 2 / (divider + 2); + } else if (c->flags & DIV_2) { + return c->parent->rate / 2; + } + return -EINVAL; +} static struct clk_ops tegra_pll_div_ops = { .init = tegra2_pll_div_clk_init, .enable = tegra2_pll_div_clk_enable, .disable = tegra2_pll_div_clk_disable, .set_rate = tegra2_pll_div_clk_set_rate, - .recalculate_rate = tegra2_clk_recalculate_rate, + .round_rate = tegra2_pll_div_clk_round_rate, }; /* Periph clk ops */ @@ -621,9 +743,13 @@ static void tegra2_periph_clk_init(struct clk *c) } if (c->flags & DIV_U71) { - u32 divu71 = val & PERIPH_CLK_SOURCE_DIV_MASK; + u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK; c->div = divu71 + 2; c->mul = 2; + } else if (c->flags & DIV_U16) { + u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK; + c->div = divu16 + 1; + c->mul = 1; } else { c->div = 1; c->mul = 1; @@ -637,7 +763,6 @@ static void tegra2_periph_clk_init(struct clk *c) if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_ENB_BIT(c)) c->state = OFF; - tegra2_clk_recalculate_rate(c); } static int tegra2_periph_clk_enable(struct clk *c) @@ -692,12 +817,19 @@ static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p) pr_debug("%s: %s %s\n", __func__, c->name, p->name); for (sel = c->inputs; sel->input != NULL; sel++) { if (sel->input == p) { - clk_reparent(c, p); val = clk_readl(c->reg); val &= ~PERIPH_CLK_SOURCE_MASK; val |= (sel->value) << PERIPH_CLK_SOURCE_SHIFT; + + if (c->refcnt) + clk_enable_locked(p); + clk_writel(val, c->reg); - c->rate = c->parent->rate; + + if (c->refcnt && c->parent) + clk_disable_locked(c->parent); + + clk_reparent(c, p); return 0; } } @@ -708,20 +840,55 @@ static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p) static int tegra2_periph_clk_set_rate(struct clk *c, unsigned long rate) { u32 val; - int divider_u71; + int divider; pr_debug("%s: %lu\n", __func__, rate); if (c->flags & DIV_U71) { - divider_u71 = clk_div71_get_divider(c->parent, rate); - if (divider_u71 >= 0) { + divider = clk_div71_get_divider(c->parent->rate, rate); + if (divider >= 0) { val = clk_readl(c->reg); - val &= ~PERIPH_CLK_SOURCE_DIV_MASK; - val |= divider_u71; + val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK; + val |= divider; clk_writel(val, c->reg); - c->div = divider_u71 + 2; + c->div = divider + 2; c->mul = 2; - tegra2_clk_recalculate_rate(c); return 0; } + } else if (c->flags & DIV_U16) { + divider = clk_div16_get_divider(c->parent->rate, rate); + if (divider >= 0) { + val = clk_readl(c->reg); + val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK; + val |= divider; + clk_writel(val, c->reg); + c->div = divider + 1; + c->mul = 1; + return 0; + } + } else if (c->parent->rate <= rate) { + c->div = 1; + c->mul = 1; + return 0; + } + return -EINVAL; +} + +static long tegra2_periph_clk_round_rate(struct clk *c, + unsigned long rate) +{ + int divider; + pr_debug("%s: %s %lu\n", __func__, c->name, rate); + + if (c->flags & DIV_U71) { + divider = clk_div71_get_divider(c->parent->rate, rate); + if (divider < 0) + return divider; + + return c->parent->rate * 2 / (divider + 2); + } else if (c->flags & DIV_U16) { + divider = clk_div16_get_divider(c->parent->rate, rate); + if (divider < 0) + return divider; + return c->parent->rate / (divider + 1); } return -EINVAL; } @@ -732,7 +899,7 @@ static struct clk_ops tegra_periph_clk_ops = { .disable = &tegra2_periph_clk_disable, .set_parent = &tegra2_periph_clk_set_parent, .set_rate = &tegra2_periph_clk_set_rate, - .recalculate_rate = &tegra2_clk_recalculate_rate, + .round_rate = &tegra2_periph_clk_round_rate, }; /* Clock doubler ops */ @@ -744,21 +911,108 @@ static void tegra2_clk_double_init(struct clk *c) if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_ENB_BIT(c))) c->state = OFF; - tegra2_clk_recalculate_rate(c); }; +static int tegra2_clk_double_set_rate(struct clk *c, unsigned long rate) +{ + if (rate != 2 * c->parent->rate) + return -EINVAL; + c->mul = 2; + c->div = 1; + return 0; +} + static struct clk_ops tegra_clk_double_ops = { .init = &tegra2_clk_double_init, .enable = &tegra2_periph_clk_enable, .disable = &tegra2_periph_clk_disable, - .recalculate_rate = &tegra2_clk_recalculate_rate, + .set_rate = &tegra2_clk_double_set_rate, +}; + +static void tegra2_audio_sync_clk_init(struct clk *c) +{ + int source; + const struct clk_mux_sel *sel; + u32 val = clk_readl(c->reg); + c->state = (val & (1<<4)) ? OFF : ON; + source = val & 0xf; + for (sel = c->inputs; sel->input != NULL; sel++) + if (sel->value == source) + break; + BUG_ON(sel->input == NULL); + c->parent = sel->input; +} + +static int tegra2_audio_sync_clk_enable(struct clk *c) +{ + clk_writel(0, c->reg); + return 0; +} + +static void tegra2_audio_sync_clk_disable(struct clk *c) +{ + clk_writel(1, c->reg); +} + +static int tegra2_audio_sync_clk_set_parent(struct clk *c, struct clk *p) +{ + u32 val; + const struct clk_mux_sel *sel; + for (sel = c->inputs; sel->input != NULL; sel++) { + if (sel->input == p) { + val = clk_readl(c->reg); + val &= ~0xf; + val |= sel->value; + + if (c->refcnt) + clk_enable_locked(p); + + clk_writel(val, c->reg); + + if (c->refcnt && c->parent) + clk_disable_locked(c->parent); + + clk_reparent(c, p); + return 0; + } + } + + return -EINVAL; +} + +static int tegra2_audio_sync_clk_set_rate(struct clk *c, unsigned long rate) +{ + unsigned long parent_rate; + if (!c->parent) { + pr_err("%s: clock has no parent\n", __func__); + return -EINVAL; + } + parent_rate = c->parent->rate; + if (rate != parent_rate) { + pr_err("%s: %s/%ld differs from parent %s/%ld\n", + __func__, + c->name, rate, + c->parent->name, parent_rate); + return -EINVAL; + } + c->rate = parent_rate; + return 0; +} + +static struct clk_ops tegra_audio_sync_clk_ops = { + .init = tegra2_audio_sync_clk_init, + .enable = tegra2_audio_sync_clk_enable, + .disable = tegra2_audio_sync_clk_disable, + .set_rate = tegra2_audio_sync_clk_set_rate, + .set_parent = tegra2_audio_sync_clk_set_parent, }; /* Clock definitions */ static struct clk tegra_clk_32k = { .name = "clk_32k", - .rate = 32678, + .rate = 32768, .ops = NULL, + .max_rate = 32768, }; static struct clk_pll_table tegra_pll_s_table[] = { @@ -782,6 +1036,7 @@ static struct clk tegra_pll_s = { .vco_min = 12000000, .vco_max = 26000000, .pll_table = tegra_pll_s_table, + .max_rate = 26000000, }; static struct clk_mux_sel tegra_clk_m_sel[] = { @@ -797,6 +1052,7 @@ static struct clk tegra_clk_m = { .reg = 0x1fc, .reg_mask = (1<<28), .reg_shift = 28, + .max_rate = 26000000, }; static struct clk_pll_table tegra_pll_c_table[] = { @@ -816,6 +1072,7 @@ static struct clk tegra_pll_c = { .vco_min = 20000000, .vco_max = 1400000000, .pll_table = tegra_pll_c_table, + .max_rate = 600000000, }; static struct clk tegra_pll_c_out1 = { @@ -825,9 +1082,18 @@ static struct clk tegra_pll_c_out1 = { .parent = &tegra_pll_c, .reg = 0x84, .reg_shift = 0, + .max_rate = 600000000, }; static struct clk_pll_table tegra_pll_m_table[] = { + { 12000000, 666000000, 666, 12, 1, 8}, + { 13000000, 666000000, 666, 13, 1, 8}, + { 19200000, 666000000, 555, 16, 1, 8}, + { 26000000, 666000000, 666, 26, 1, 8}, + { 12000000, 600000000, 600, 12, 1, 8}, + { 13000000, 600000000, 600, 13, 1, 8}, + { 19200000, 600000000, 375, 12, 1, 6}, + { 26000000, 600000000, 600, 26, 1, 8}, { 0, 0, 0, 0, 0, 0 }, }; @@ -844,6 +1110,7 @@ static struct clk tegra_pll_m = { .vco_min = 20000000, .vco_max = 1200000000, .pll_table = tegra_pll_m_table, + .max_rate = 800000000, }; static struct clk tegra_pll_m_out1 = { @@ -853,6 +1120,7 @@ static struct clk tegra_pll_m_out1 = { .parent = &tegra_pll_m, .reg = 0x94, .reg_shift = 0, + .max_rate = 600000000, }; static struct clk_pll_table tegra_pll_p_table[] = { @@ -880,6 +1148,7 @@ static struct clk tegra_pll_p = { .vco_min = 20000000, .vco_max = 1400000000, .pll_table = tegra_pll_p_table, + .max_rate = 432000000, }; static struct clk tegra_pll_p_out1 = { @@ -889,6 +1158,7 @@ static struct clk tegra_pll_p_out1 = { .parent = &tegra_pll_p, .reg = 0xa4, .reg_shift = 0, + .max_rate = 432000000, }; static struct clk tegra_pll_p_out2 = { @@ -898,6 +1168,7 @@ static struct clk tegra_pll_p_out2 = { .parent = &tegra_pll_p, .reg = 0xa4, .reg_shift = 16, + .max_rate = 432000000, }; static struct clk tegra_pll_p_out3 = { @@ -907,6 +1178,7 @@ static struct clk tegra_pll_p_out3 = { .parent = &tegra_pll_p, .reg = 0xa8, .reg_shift = 0, + .max_rate = 432000000, }; static struct clk tegra_pll_p_out4 = { @@ -916,6 +1188,7 @@ static struct clk tegra_pll_p_out4 = { .parent = &tegra_pll_p, .reg = 0xa8, .reg_shift = 16, + .max_rate = 432000000, }; static struct clk_pll_table tegra_pll_a_table[] = { @@ -923,6 +1196,7 @@ static struct clk_pll_table tegra_pll_a_table[] = { { 28800000, 73728000, 64, 25, 1, 1}, { 28800000, 11289600, 49, 25, 1, 1}, { 28800000, 12288000, 64, 25, 1, 1}, + { 28800000, 24000000, 5, 6, 1, 1}, { 0, 0, 0, 0, 0, 0 }, }; @@ -939,6 +1213,7 @@ static struct clk tegra_pll_a = { .vco_min = 20000000, .vco_max = 1400000000, .pll_table = tegra_pll_a_table, + .max_rate = 56448000, }; static struct clk tegra_pll_a_out0 = { @@ -948,6 +1223,7 @@ static struct clk tegra_pll_a_out0 = { .parent = &tegra_pll_a, .reg = 0xb4, .reg_shift = 0, + .max_rate = 56448000, }; static struct clk_pll_table tegra_pll_d_table[] = { @@ -971,6 +1247,7 @@ static struct clk tegra_pll_d = { .vco_min = 40000000, .vco_max = 1000000000, .pll_table = tegra_pll_d_table, + .max_rate = 1000000000, }; static struct clk tegra_pll_d_out0 = { @@ -978,19 +1255,20 @@ static struct clk tegra_pll_d_out0 = { .ops = &tegra_pll_div_ops, .flags = DIV_2 | PLLD, .parent = &tegra_pll_d, + .max_rate = 500000000, }; static struct clk_pll_table tegra_pll_u_table[] = { - { 12000000, 480000000, 960, 12, 1, 0}, - { 13000000, 480000000, 960, 13, 1, 0}, - { 19200000, 480000000, 200, 4, 1, 0}, - { 26000000, 480000000, 960, 26, 1, 0}, + { 12000000, 480000000, 960, 12, 2, 0}, + { 13000000, 480000000, 960, 13, 2, 0}, + { 19200000, 480000000, 200, 4, 2, 0}, + { 26000000, 480000000, 960, 26, 2, 0}, { 0, 0, 0, 0, 0, 0 }, }; static struct clk tegra_pll_u = { .name = "pll_u", - .flags = 0, + .flags = PLLU, .ops = &tegra_pll_ops, .reg = 0xc0, .input_min = 2000000, @@ -1001,24 +1279,59 @@ static struct clk tegra_pll_u = { .vco_min = 480000000, .vco_max = 960000000, .pll_table = tegra_pll_u_table, + .max_rate = 480000000, }; static struct clk_pll_table tegra_pll_x_table[] = { + /* 1 GHz */ { 12000000, 1000000000, 1000, 12, 1, 12}, { 13000000, 1000000000, 1000, 13, 1, 12}, { 19200000, 1000000000, 625, 12, 1, 8}, { 26000000, 1000000000, 1000, 26, 1, 12}, - { 12000000, 750000000, 750, 12, 1, 12}, - { 13000000, 750000000, 750, 13, 1, 12}, - { 19200000, 750000000, 625, 16, 1, 8}, - { 26000000, 750000000, 750, 26, 1, 12}, + + /* 912 MHz */ + { 12000000, 912000000, 912, 12, 1, 12}, + { 13000000, 912000000, 912, 13, 1, 12}, + { 19200000, 912000000, 760, 16, 1, 8}, + { 26000000, 912000000, 912, 26, 1, 12}, + + /* 816 MHz */ + { 12000000, 816000000, 816, 12, 1, 12}, + { 13000000, 816000000, 816, 13, 1, 12}, + { 19200000, 816000000, 680, 16, 1, 8}, + { 26000000, 816000000, 816, 26, 1, 12}, + + /* 760 MHz */ + { 12000000, 760000000, 760, 12, 1, 12}, + { 13000000, 760000000, 760, 13, 1, 12}, + { 19200000, 760000000, 950, 24, 1, 8}, + { 26000000, 760000000, 760, 26, 1, 12}, + + /* 608 MHz */ + { 12000000, 608000000, 760, 12, 1, 12}, + { 13000000, 608000000, 760, 13, 1, 12}, + { 19200000, 608000000, 380, 12, 1, 8}, + { 26000000, 608000000, 760, 26, 1, 12}, + + /* 456 MHz */ + { 12000000, 456000000, 456, 12, 1, 12}, + { 13000000, 456000000, 456, 13, 1, 12}, + { 19200000, 456000000, 380, 16, 1, 8}, + { 26000000, 456000000, 456, 26, 1, 12}, + + /* 312 MHz */ + { 12000000, 312000000, 312, 12, 1, 12}, + { 13000000, 312000000, 312, 13, 1, 12}, + { 19200000, 312000000, 260, 16, 1, 8}, + { 26000000, 312000000, 312, 26, 1, 12}, + { 0, 0, 0, 0, 0, 0 }, }; static struct clk tegra_pll_x = { .name = "pll_x", .flags = PLL_HAS_CPCON | PLL_ALT_MISC_REG, - .ops = &tegra_pll_ops, + .ops = &tegra_pllx_ops, .reg = 0xe0, .input_min = 2000000, .input_max = 31000000, @@ -1028,6 +1341,24 @@ static struct clk tegra_pll_x = { .vco_min = 20000000, .vco_max = 1200000000, .pll_table = tegra_pll_x_table, + .max_rate = 1000000000, +}; + +static struct clk_pll_table tegra_pll_e_table[] = { + { 12000000, 100000000, 200, 24, 1, 0 }, + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct clk tegra_pll_e = { + .name = "pll_e", + .flags = PLL_ALT_MISC_REG, + .ops = &tegra_plle_ops, + .input_min = 12000000, + .input_max = 12000000, + .max_rate = 100000000, + .parent = &tegra_clk_m, + .reg = 0xe8, + .pll_table = tegra_pll_e_table, }; static struct clk tegra_clk_d = { @@ -1038,19 +1369,77 @@ static struct clk tegra_clk_d = { .reg = 0x34, .reg_shift = 12, .parent = &tegra_clk_m, + .max_rate = 52000000, +}; + +/* initialized before peripheral clocks */ +static struct clk_mux_sel mux_audio_sync_clk[8+1]; +static const struct audio_sources { + const char *name; + int value; +} mux_audio_sync_clk_sources[] = { + { .name = "spdif_in", .value = 0 }, + { .name = "i2s1", .value = 1 }, + { .name = "i2s2", .value = 2 }, + { .name = "pll_a_out0", .value = 4 }, +#if 0 /* FIXME: not implemented */ + { .name = "ac97", .value = 3 }, + { .name = "ext_audio_clk2", .value = 5 }, + { .name = "ext_audio_clk1", .value = 6 }, + { .name = "ext_vimclk", .value = 7 }, +#endif + { 0, 0 } +}; + +static struct clk tegra_clk_audio = { + .name = "audio", + .inputs = mux_audio_sync_clk, + .reg = 0x38, + .max_rate = 24000000, + .ops = &tegra_audio_sync_clk_ops }; -/* FIXME: need tegra_audio static struct clk tegra_clk_audio_2x = { - .name = "clk_d", + .name = "audio_2x", .flags = PERIPH_NO_RESET, + .max_rate = 48000000, .ops = &tegra_clk_double_ops, .clk_num = 89, .reg = 0x34, .reg_shift = 8, - .parent = &tegra_audio, + .parent = &tegra_clk_audio, +}; + +struct clk_lookup tegra_audio_clk_lookups[] = { + { .con_id = "audio", .clk = &tegra_clk_audio }, + { .con_id = "audio_2x", .clk = &tegra_clk_audio_2x } +}; + +/* This is called after peripheral clocks are initialized, as the + * audio_sync clock depends on some of the peripheral clocks. + */ + +static void init_audio_sync_clock_mux(void) +{ + int i; + struct clk_mux_sel *sel = mux_audio_sync_clk; + const struct audio_sources *src = mux_audio_sync_clk_sources; + struct clk_lookup *lookup; + + for (i = 0; src->name; i++, sel++, src++) { + sel->input = tegra_get_clock_by_name(src->name); + if (!sel->input) + pr_err("%s: could not find clk %s\n", __func__, + src->name); + sel->value = src->value; + } + + lookup = tegra_audio_clk_lookups; + for (i = 0; i < ARRAY_SIZE(tegra_audio_clk_lookups); i++, lookup++) { + clk_init(lookup->clk); + clkdev_add(lookup); + } } -*/ static struct clk_mux_sel mux_cclk[] = { { .input = &tegra_clk_m, .value = 0}, @@ -1077,27 +1466,40 @@ static struct clk_mux_sel mux_sclk[] = { { 0, 0}, }; -static struct clk tegra_clk_cpu = { - .name = "cpu", +static struct clk tegra_clk_cclk = { + .name = "cclk", .inputs = mux_cclk, .reg = 0x20, .ops = &tegra_super_ops, + .max_rate = 1000000000, }; -static struct clk tegra_clk_sys = { - .name = "sys", +static struct clk tegra_clk_sclk = { + .name = "sclk", .inputs = mux_sclk, .reg = 0x28, .ops = &tegra_super_ops, + .max_rate = 600000000, +}; + +static struct clk tegra_clk_virtual_cpu = { + .name = "cpu", + .parent = &tegra_clk_cclk, + .main = &tegra_pll_x, + .backup = &tegra_clk_m, + .ops = &tegra_cpu_ops, + .max_rate = 1000000000, + .dvfs = &tegra_dvfs_virtual_cpu_dvfs, }; static struct clk tegra_clk_hclk = { .name = "hclk", .flags = DIV_BUS, - .parent = &tegra_clk_sys, + .parent = &tegra_clk_sclk, .reg = 0x30, .reg_shift = 4, .ops = &tegra_bus_ops, + .max_rate = 240000000, }; static struct clk tegra_clk_pclk = { @@ -1107,6 +1509,7 @@ static struct clk tegra_clk_pclk = { .reg = 0x30, .reg_shift = 0, .ops = &tegra_bus_ops, + .max_rate = 108000000, }; static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = { @@ -1133,10 +1536,9 @@ static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = { { 0, 0}, }; -static struct clk_mux_sel mux_plla_audio_pllp_clkm[] = { - {.input = &tegra_pll_a, .value = 0}, - /* FIXME: no mux defined for tegra_audio - {.input = &tegra_audio, .value = 1},*/ +static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = { + {.input = &tegra_pll_a_out0, .value = 0}, + {.input = &tegra_clk_audio_2x, .value = 1}, {.input = &tegra_pll_p, .value = 2}, {.input = &tegra_clk_m, .value = 3}, { 0, 0}, @@ -1153,8 +1555,7 @@ static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = { static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = { {.input = &tegra_pll_p, .value = 0}, {.input = &tegra_pll_c, .value = 1}, - /* FIXME: no mux defined for tegra_audio - {.input = &tegra_audio, .value = 2},*/ + {.input = &tegra_clk_audio, .value = 2}, {.input = &tegra_clk_m, .value = 3}, {.input = &tegra_clk_32k, .value = 4}, { 0, 0}, @@ -1187,7 +1588,7 @@ static struct clk_mux_sel mux_clk_32k[] = { { 0, 0}, }; -#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _inputs, _flags) \ +#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \ { \ .name = _name, \ .lookup = { \ @@ -1199,72 +1600,79 @@ static struct clk_mux_sel mux_clk_32k[] = { .reg = _reg, \ .inputs = _inputs, \ .flags = _flags, \ + .max_rate = _max, \ } struct clk tegra_periph_clks[] = { - PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, mux_clk_32k, PERIPH_NO_RESET), - PERIPH_CLK("timer", "timer", NULL, 5, 0, mux_clk_m, 0), - PERIPH_CLK("i2s1", "i2s.0", NULL, 11, 0x100, mux_plla_audio_pllp_clkm, MUX | DIV_U71), - PERIPH_CLK("i2s2", "i2s.1", NULL, 18, 0x104, mux_plla_audio_pllp_clkm, MUX | DIV_U71), + PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET), + PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0), + PERIPH_CLK("i2s1", "i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), + PERIPH_CLK("i2s2", "i2s.1", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), /* FIXME: spdif has 2 clocks but 1 enable */ - PERIPH_CLK("spdif_out", "spdif_out", NULL, 10, 0x108, mux_plla_audio_pllp_clkm, MUX | DIV_U71), - PERIPH_CLK("spdif_in", "spdif_in", NULL, 10, 0x10c, mux_pllp_pllc_pllm, MUX | DIV_U71), - PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71), - PERIPH_CLK("spi", "spi", NULL, 43, 0x114, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("xio", "xio", NULL, 45, 0x120, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("twc", "twc", NULL, 16, 0x12c, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("sbc1", "spi_tegra.0", NULL, 41, 0x134, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("sbc2", "spi_tegra.1", NULL, 44, 0x118, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("sbc3", "spi_tegra.2", NULL, 46, 0x11c, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("sbc4", "spi_tegra.3", NULL, 68, 0x1b4, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("ide", "ide", NULL, 25, 0x144, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("ndflash", "tegra_nand", NULL, 13, 0x160, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("spdif_out", "spdif_out", NULL, 10, 0x108, 100000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71), + PERIPH_CLK("spdif_in", "spdif_in", NULL, 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71), + PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71), + PERIPH_CLK("spi", "spi", NULL, 43, 0x114, 40000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("xio", "xio", NULL, 45, 0x120, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("twc", "twc", NULL, 16, 0x12c, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("sbc1", "spi_tegra.0", NULL, 41, 0x134, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("sbc2", "spi_tegra.1", NULL, 44, 0x118, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("sbc3", "spi_tegra.2", NULL, 46, 0x11c, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("sbc4", "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("ide", "ide", NULL, 25, 0x144, 100000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("ndflash", "tegra_nand", NULL, 13, 0x160, 164000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ /* FIXME: vfir shares an enable with uartb */ - PERIPH_CLK("vfir", "vfir", NULL, 7, 0x168, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("sdmmc1", "sdhci-tegra.0", NULL, 14, 0x150, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("sdmmc2", "sdhci-tegra.1", NULL, 9, 0x154, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("sdmmc3", "sdhci-tegra.2", NULL, 69, 0x1bc, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("sdmmc4", "sdhci-tegra.3", NULL, 15, 0x160, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("vde", "vde", NULL, 61, 0x1c8, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("csite", "csite", NULL, 73, 0x1d4, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("vfir", "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("sdmmc1", "sdhci-tegra.0", NULL, 14, 0x150, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("sdmmc2", "sdhci-tegra.1", NULL, 9, 0x154, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("sdmmc3", "sdhci-tegra.2", NULL, 69, 0x1bc, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("sdmmc4", "sdhci-tegra.3", NULL, 15, 0x160, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("vde", "vde", NULL, 61, 0x1c8, 250000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("csite", "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* max rate ??? */ /* FIXME: what is la? */ - PERIPH_CLK("la", "la", NULL, 76, 0x1f8, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("owr", "owr", NULL, 71, 0x1cc, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("nor", "nor", NULL, 42, 0x1d0, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("mipi", "mipi", NULL, 50, 0x174, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("i2c1", "tegra-i2c.0", NULL, 12, 0x124, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("i2c2", "tegra-i2c.1", NULL, 54, 0x198, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("i2c3", "tegra-i2c.2", NULL, 67, 0x1b8, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("dvc", "tegra-i2c.3", NULL, 47, 0x128, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("i2c1_i2c", "tegra-i2c.0", "i2c", 0, 0, mux_pllp_out3, 0), - PERIPH_CLK("i2c2_i2c", "tegra-i2c.1", "i2c", 0, 0, mux_pllp_out3, 0), - PERIPH_CLK("i2c3_i2c", "tegra-i2c.2", "i2c", 0, 0, mux_pllp_out3, 0), - PERIPH_CLK("dvc_i2c", "tegra-i2c.3", "i2c", 0, 0, mux_pllp_out3, 0), - PERIPH_CLK("uarta", "uart.0", NULL, 6, 0x178, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("uartb", "uart.1", NULL, 7, 0x17c, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("uartc", "uart.2", NULL, 55, 0x1a0, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("uartd", "uart.3", NULL, 65, 0x1c0, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("uarte", "uart.4", NULL, 66, 0x1c4, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), - PERIPH_CLK("3d", "3d", NULL, 24, 0x158, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET), - PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), + PERIPH_CLK("la", "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("owr", "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), + PERIPH_CLK("nor", "nor", NULL, 42, 0x1d0, 92000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("mipi", "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */ + PERIPH_CLK("i2c1", "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16), + PERIPH_CLK("i2c2", "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16), + PERIPH_CLK("i2c3", "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16), + PERIPH_CLK("dvc", "tegra-i2c.3", NULL, 47, 0x128, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16), + PERIPH_CLK("i2c1_i2c", "tegra-i2c.0", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), + PERIPH_CLK("i2c2_i2c", "tegra-i2c.1", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), + PERIPH_CLK("i2c3_i2c", "tegra-i2c.2", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), + PERIPH_CLK("dvc_i2c", "tegra-i2c.3", "i2c", 0, 0, 72000000, mux_pllp_out3, 0), + PERIPH_CLK("uarta", "uart.0", NULL, 6, 0x178, 216000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uartb", "uart.1", NULL, 7, 0x17c, 216000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uartc", "uart.2", NULL, 55, 0x1a0, 216000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uartd", "uart.3", NULL, 65, 0x1c0, 216000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("uarte", "uart.4", NULL, 66, 0x1c4, 216000000, mux_pllp_pllc_pllm_clkm, MUX), + PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */ + PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ /* FIXME: vi and vi_sensor share an enable */ - PERIPH_CLK("vi", "vi", NULL, 20, 0x148, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), - PERIPH_CLK("vi_sensor", "vi_sensor", NULL, 20, 0x1a8, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), - PERIPH_CLK("epp", "epp", NULL, 19, 0x16c, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), - PERIPH_CLK("mpe", "mpe", NULL, 60, 0x170, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), - PERIPH_CLK("host1x", "host1x", NULL, 28, 0x180, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), + PERIPH_CLK("vi", "vi", NULL, 20, 0x148, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("vi_sensor", "vi_sensor", NULL, 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */ + PERIPH_CLK("epp", "epp", NULL, 19, 0x16c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("mpe", "mpe", NULL, 60, 0x170, 250000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("host1x", "host1x", NULL, 28, 0x180, 166000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71), /* scales with voltage and process_id */ /* FIXME: cve and tvo share an enable */ - PERIPH_CLK("cve", "cve", NULL, 49, 0x140, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), - PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), - PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), - PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), - PERIPH_CLK("disp1", "tegrafb.0", NULL, 27, 0x138, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), - PERIPH_CLK("disp2", "tegrafb.1", NULL, 26, 0x13c, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), - PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, mux_clk_m, 0), - PERIPH_CLK("usb2", "usb.1", NULL, 58, 0, mux_clk_m, 0), - PERIPH_CLK("usb3", "usb.2", NULL, 59, 0, mux_clk_m, 0), - PERIPH_CLK("emc", "emc", NULL, 57, 0x19c, mux_pllm_pllc_pllp_clkm, MUX | DIV_U71 | PERIPH_EMC_ENB), - PERIPH_CLK("dsi", "dsi", NULL, 48, 0, mux_plld, 0), + PERIPH_CLK("cve", "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 148500000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ + PERIPH_CLK("disp1", "tegrafb.0", NULL, 27, 0x138, 190000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("disp2", "tegrafb.1", NULL, 26, 0x13c, 190000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ + PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ + PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ + PERIPH_CLK("emc", "emc", NULL, 57, 0x19c, 800000000, mux_pllm_pllc_pllp_clkm, MUX | DIV_U71 | PERIPH_EMC_ENB), + PERIPH_CLK("dsi", "dsi", NULL, 48, 0, 500000000, mux_plld, 0), /* scales with voltage */ + PERIPH_CLK("csi", "csi", NULL, 52, 0, 72000000, mux_pllp_out3, 0), + PERIPH_CLK("isp", "isp", NULL, 23, 0, 150000000, mux_clk_m, 0), /* same frequency as VI */ + PERIPH_CLK("csus", "csus", NULL, 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET), + PERIPH_CLK("pex", NULL, "pex", 70, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET), + PERIPH_CLK("afi", NULL, "afi", 72, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET), + PERIPH_CLK("pcie_xclk", NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET), }; #define CLK_DUPLICATE(_name, _dev, _con) \ @@ -1286,6 +1694,9 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("uartc", "tegra_uart.2", NULL), CLK_DUPLICATE("uartd", "tegra_uart.3", NULL), CLK_DUPLICATE("uarte", "tegra_uart.4", NULL), + CLK_DUPLICATE("host1x", "tegrafb.0", "host1x"), + CLK_DUPLICATE("host1x", "tegrafb.1", "host1x"), + CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), }; #define CLK(dev, con, ck) \ @@ -1315,11 +1726,13 @@ struct clk_lookup tegra_clk_lookups[] = { CLK(NULL, "pll_d_out0", &tegra_pll_d_out0), CLK(NULL, "pll_u", &tegra_pll_u), CLK(NULL, "pll_x", &tegra_pll_x), - CLK(NULL, "cpu", &tegra_clk_cpu), - CLK(NULL, "sys", &tegra_clk_sys), + CLK(NULL, "pll_e", &tegra_pll_e), + CLK(NULL, "cclk", &tegra_clk_cclk), + CLK(NULL, "sclk", &tegra_clk_sclk), CLK(NULL, "hclk", &tegra_clk_hclk), CLK(NULL, "pclk", &tegra_clk_pclk), CLK(NULL, "clk_d", &tegra_clk_d), + CLK(NULL, "cpu", &tegra_clk_virtual_cpu), }; void __init tegra2_init_clocks(void) @@ -1356,4 +1769,75 @@ void __init tegra2_init_clocks(void) cd->name); } } + + init_audio_sync_clock_mux(); +} + +#ifdef CONFIG_PM +static u32 clk_rst_suspend[RST_DEVICES_NUM + CLK_OUT_ENB_NUM + + PERIPH_CLK_SOURCE_NUM + 3]; + +void tegra_clk_suspend(void) +{ + unsigned long off, i; + u32 *ctx = clk_rst_suspend; + + *ctx++ = clk_readl(OSC_CTRL) & OSC_CTRL_MASK; + + for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC; + off += 4) { + if (off == PERIPH_CLK_SOURCE_EMC) + continue; + *ctx++ = clk_readl(off); + } + + off = RST_DEVICES; + for (i = 0; i < RST_DEVICES_NUM; i++, off += 4) + *ctx++ = clk_readl(off); + + off = CLK_OUT_ENB; + for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4) + *ctx++ = clk_readl(off); + + *ctx++ = clk_readl(MISC_CLK_ENB); + *ctx++ = clk_readl(CLK_MASK_ARM); +} + +void tegra_clk_resume(void) +{ + unsigned long off, i; + const u32 *ctx = clk_rst_suspend; + u32 val; + + val = clk_readl(OSC_CTRL) & ~OSC_CTRL_MASK; + val |= *ctx++; + clk_writel(val, OSC_CTRL); + + /* enable all clocks before configuring clock sources */ + clk_writel(0xbffffff9ul, CLK_OUT_ENB); + clk_writel(0xfefffff7ul, CLK_OUT_ENB + 4); + clk_writel(0x77f01bfful, CLK_OUT_ENB + 8); + wmb(); + + for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC; + off += 4) { + if (off == PERIPH_CLK_SOURCE_EMC) + continue; + clk_writel(*ctx++, off); + } + wmb(); + + off = RST_DEVICES; + for (i = 0; i < RST_DEVICES_NUM; i++, off += 4) + clk_writel(*ctx++, off); + wmb(); + + off = CLK_OUT_ENB; + for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4) + clk_writel(*ctx++, off); + wmb(); + + clk_writel(*ctx++, MISC_CLK_ENB); + clk_writel(*ctx++, CLK_MASK_ARM); } +#endif diff --git a/arch/arm/mach-tegra/tegra2_dvfs.c b/arch/arm/mach-tegra/tegra2_dvfs.c new file mode 100644 index 000000000000..5529c238dd77 --- /dev/null +++ b/arch/arm/mach-tegra/tegra2_dvfs.c @@ -0,0 +1,86 @@ +/* + * arch/arm/mach-tegra/tegra2_dvfs.c + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross <ccross@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> + +#include "clock.h" +#include "tegra2_dvfs.h" + +static struct dvfs_table virtual_cpu_process_0[] = { + {314000000, 750}, + {456000000, 825}, + {608000000, 900}, + {760000000, 975}, + {817000000, 1000}, + {912000000, 1050}, + {1000000000, 1100}, + {0, 0}, +}; + +static struct dvfs_table virtual_cpu_process_1[] = { + {314000000, 750}, + {456000000, 825}, + {618000000, 900}, + {770000000, 975}, + {827000000, 1000}, + {922000000, 1050}, + {1000000000, 1100}, + {0, 0}, +}; + +static struct dvfs_table virtual_cpu_process_2[] = { + {494000000, 750}, + {675000000, 825}, + {817000000, 875}, + {922000000, 925}, + {1000000000, 975}, + {0, 0}, +}; + +static struct dvfs_table virtual_cpu_process_3[] = { + {730000000, 750}, + {760000000, 775}, + {845000000, 800}, + {1000000000, 875}, + {0, 0}, +}; + +struct dvfs tegra_dvfs_virtual_cpu_dvfs = { + .reg_id = "vdd_cpu", + .process_id_table = { + { + .process_id = 0, + .table = virtual_cpu_process_0, + }, + { + .process_id = 1, + .table = virtual_cpu_process_1, + }, + { + .process_id = 2, + .table = virtual_cpu_process_2, + }, + { + .process_id = 3, + .table = virtual_cpu_process_3, + }, + }, + .process_id_table_length = 4, + .cpu = 1, +}; diff --git a/arch/arm/mach-tegra/tegra2_dvfs.h b/arch/arm/mach-tegra/tegra2_dvfs.h new file mode 100644 index 000000000000..f8c1adba96a6 --- /dev/null +++ b/arch/arm/mach-tegra/tegra2_dvfs.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-tegra/tegra2_dvfs.h + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross <ccross@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +extern struct dvfs tegra_dvfs_virtual_cpu_dvfs; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6625e5bbf4d6..23fe018cd10b 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -39,4 +39,18 @@ config UX500_DEBUG_UART Choose the UART on which kernel low-level debug messages should be output. +config U5500_MODEM_IRQ + bool "Modem IRQ support" + depends on MACH_U5500 + default y + help + Add support for handling IRQ:s from modem side + +config U5500_MBOX + bool "Mailbox support" + depends on MACH_U5500 && U5500_MODEM_IRQ + default y + help + Add support for U5500 mailbox communication with modem side + endif diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 4556aea9c3c5..9e27a84433cb 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -4,8 +4,12 @@ obj-y := clock.o cpu.o devices.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o -obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o -obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o +obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o obj-$(CONFIG_MACH_U5500) += board-u5500.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o +obj-$(CONFIG_U5500_MODEM_IRQ) += modem_irq.o +obj-$(CONFIG_U5500_MBOX) += mbox.o diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c new file mode 100644 index 000000000000..1187f1fc2e53 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * + * MOP500 board specific initialization for regulators + */ +#include <linux/kernel.h> +#include <linux/regulator/machine.h> + +/* supplies to the display/camera */ +static struct regulator_init_data ab8500_vaux1_regulator = { + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2500000, + .max_uV = 2900000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE| + REGULATOR_CHANGE_STATUS, + }, +}; + +/* supplies to the on-board eMMC */ +static struct regulator_init_data ab8500_vaux2_regulator = { + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE| + REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for VAUX3, supplies to SDcard slots */ +static struct regulator_init_data ab8500_vaux3_regulator = { + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE| + REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for tvout, gpadc, TVOUT LDO */ +static struct regulator_init_data ab8500_vtvout_init = { + .constraints = { + .name = "V-TVOUT", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for ab8500-vaudio, VAUDIO LDO */ +static struct regulator_init_data ab8500_vaudio_init = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-anamic1 VAMic1-LDO */ +static struct regulator_init_data ab8500_vamic1_init = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ +static struct regulator_init_data ab8500_vamic2_init = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-dmic, VDMIC LDO */ +static struct regulator_init_data ab8500_vdmic_init = { + .constraints = { + .name = "V-DMIC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-intcore12, VINTCORE12 LDO */ +static struct regulator_init_data ab8500_vintcore_init = { + .constraints = { + .name = "V-INTCORE", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for U8500 CSI/DSI, VANA LDO */ +static struct regulator_init_data ab8500_vana_init = { + .constraints = { + .name = "V-CSI/DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c new file mode 100644 index 000000000000..bac995665b58 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -0,0 +1,91 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/amba/bus.h> +#include <linux/amba/mmci.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> + +#include <plat/pincfg.h> +#include <mach/devices.h> +#include <mach/hardware.h> + +#include "pins-db8500.h" +#include "board-mop500.h" + +static pin_cfg_t mop500_sdi_pins[] = { + /* SDI4 (on-board eMMC) */ + GPIO197_MC4_DAT3, + GPIO198_MC4_DAT2, + GPIO199_MC4_DAT1, + GPIO200_MC4_DAT0, + GPIO201_MC4_CMD, + GPIO202_MC4_FBCLK, + GPIO203_MC4_CLK, + GPIO204_MC4_DAT7, + GPIO205_MC4_DAT6, + GPIO206_MC4_DAT5, + GPIO207_MC4_DAT4, +}; + +static pin_cfg_t mop500_sdi2_pins[] = { + /* SDI2 (POP eMMC) */ + GPIO128_MC2_CLK, + GPIO129_MC2_CMD, + GPIO130_MC2_FBCLK, + GPIO131_MC2_DAT0, + GPIO132_MC2_DAT1, + GPIO133_MC2_DAT2, + GPIO134_MC2_DAT3, + GPIO135_MC2_DAT4, + GPIO136_MC2_DAT5, + GPIO137_MC2_DAT6, + GPIO138_MC2_DAT7, +}; + +/* + * SDI 2 (POP eMMC, not on DB8500ed) + */ + +static struct mmci_platform_data mop500_sdi2_data = { + .ocr_mask = MMC_VDD_165_195, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_cd = -1, + .gpio_wp = -1, +}; + +/* + * SDI 4 (on-board eMMC) + */ + +static struct mmci_platform_data mop500_sdi4_data = { + .ocr_mask = MMC_VDD_29_30, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED, + .gpio_cd = -1, + .gpio_wp = -1, +}; + +void mop500_sdi_init(void) +{ + nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins)); + + u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data; + u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data; + + if (!cpu_is_u8500ed()) { + nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins)); + amba_device_register(&u8500_sdi2_device, &iomem_resource); + } + + /* On-board eMMC */ + amba_device_register(&u8500_sdi4_device, &iomem_resource); +} diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 0e8fd135a57d..642b8e60d119 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -28,8 +28,10 @@ #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> +#include <mach/irqs.h> #include "pins-db8500.h" +#include "board-mop500.h" static pin_cfg_t mop500_pins[] = { /* SSP0 */ @@ -75,9 +77,27 @@ static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, }; -static struct spi_board_info u8500_spi_devices[] = { +static struct resource ab8500_resources[] = { + [0] = { + .start = IRQ_AB8500, + .end = IRQ_AB8500, + .flags = IORESOURCE_IRQ + } +}; + +struct platform_device ab8500_device = { + .name = "ab8500-i2c", + .id = 0, + .dev = { + .platform_data = &ab8500_platdata, + }, + .num_resources = 1, + .resource = ab8500_resources, +}; + +static struct spi_board_info ab8500_spi_devices[] = { { - .modalias = "ab8500", + .modalias = "ab8500-spi", .controller_data = &ab4500_chip_info, .platform_data = &ab8500_platdata, .max_speed_hz = 12000000, @@ -163,8 +183,14 @@ static void __init u8500_init_machine(void) platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - spi_register_board_info(u8500_spi_devices, - ARRAY_SIZE(u8500_spi_devices)); + mop500_sdi_init(); + + /* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */ + if (cpu_is_u8500ed() || cpu_is_u8500v10()) + spi_register_board_info(ab8500_spi_devices, + ARRAY_SIZE(ab8500_spi_devices)); + else /* If HW is v.1.1 or later use I2C to access AB8500 */ + platform_device_register(&ab8500_device); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h new file mode 100644 index 000000000000..2d240322fa6f --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __BOARD_MOP500_H +#define __BOARD_MOP500_H + +extern void mop500_sdi_init(void); + +#endif diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index e9278f6d67aa..2f87075e9d6f 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -14,6 +14,7 @@ #include <mach/hardware.h> #include <mach/devices.h> #include <mach/setup.h> +#include <mach/irqs.h> static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), @@ -24,6 +25,90 @@ static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), }; +static struct resource mbox0_resources[] = { + { + .name = "mbox_peer", + .start = U5500_MBOX0_PEER_START, + .end = U5500_MBOX0_PEER_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_local", + .start = U5500_MBOX0_LOCAL_START, + .end = U5500_MBOX0_LOCAL_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_irq", + .start = MBOX_PAIR0_VIRT_IRQ, + .end = MBOX_PAIR0_VIRT_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource mbox1_resources[] = { + { + .name = "mbox_peer", + .start = U5500_MBOX1_PEER_START, + .end = U5500_MBOX1_PEER_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_local", + .start = U5500_MBOX1_LOCAL_START, + .end = U5500_MBOX1_LOCAL_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_irq", + .start = MBOX_PAIR1_VIRT_IRQ, + .end = MBOX_PAIR1_VIRT_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource mbox2_resources[] = { + { + .name = "mbox_peer", + .start = U5500_MBOX2_PEER_START, + .end = U5500_MBOX2_PEER_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_local", + .start = U5500_MBOX2_LOCAL_START, + .end = U5500_MBOX2_LOCAL_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_irq", + .start = MBOX_PAIR2_VIRT_IRQ, + .end = MBOX_PAIR2_VIRT_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device mbox0_device = { + .id = 0, + .name = "mbox", + .resource = mbox0_resources, + .num_resources = ARRAY_SIZE(mbox0_resources), +}; + +static struct platform_device mbox1_device = { + .id = 1, + .name = "mbox", + .resource = mbox1_resources, + .num_resources = ARRAY_SIZE(mbox1_resources), +}; + +static struct platform_device mbox2_device = { + .id = 2, + .name = "mbox", + .resource = mbox2_resources, + .num_resources = ARRAY_SIZE(mbox2_resources), +}; + static struct platform_device *u5500_platform_devs[] __initdata = { &u5500_gpio_devs[0], &u5500_gpio_devs[1], @@ -33,6 +118,9 @@ static struct platform_device *u5500_platform_devs[] __initdata = { &u5500_gpio_devs[5], &u5500_gpio_devs[6], &u5500_gpio_devs[7], + &mbox0_device, + &mbox1_device, + &mbox2_device, }; void __init u5500_map_io(void) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index f21c444edd99..4acab7544b3c 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -38,10 +38,12 @@ static struct platform_device *platform_devs[] __initdata = { /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_io_desc[] __initdata = { __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), + __MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M), }; static struct map_desc u8500ed_io_desc[] __initdata = { @@ -53,6 +55,69 @@ static struct map_desc u8500v1_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), }; +/* + * Functions to differentiate between later ASICs + * We look into the end of the ROM to locate the hardcoded ASIC ID. + * This is only needed to differentiate between minor revisions and + * process variants of an ASIC, the major revisions are encoded in + * the cpuid. + */ +#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOT_ROM_BASE + 0x1FFF4) +#define U8500_ASIC_ID_LOC_V2 (U8500_BOOT_ROM_BASE + 0x1DBF4) +#define U8500_ASIC_REV_ED 0x01 +#define U8500_ASIC_REV_V10 0xA0 +#define U8500_ASIC_REV_V11 0xA1 +#define U8500_ASIC_REV_V20 0xB0 + +/** + * struct db8500_asic_id - fields of the ASIC ID + * @process: the manufacturing process, 0x40 is 40 nm + * 0x00 is "standard" + * @partnumber: hithereto 0x8500 for DB8500 + * @revision: version code in the series + * This field definion is not formally defined but makes + * sense. + */ +struct db8500_asic_id { + u8 process; + u16 partnumber; + u8 revision; +}; + +/* This isn't going to change at runtime */ +static struct db8500_asic_id db8500_id; + +static void __init get_db8500_asic_id(void) +{ + u32 asicid; + + if (cpu_is_u8500v1() || cpu_is_u8500ed()) + asicid = readl(__io_address(U8500_ASIC_ID_LOC_ED_V1)); + else if (cpu_is_u8500v2()) + asicid = readl(__io_address(U8500_ASIC_ID_LOC_V2)); + else + BUG(); + + db8500_id.process = (asicid >> 24); + db8500_id.partnumber = (asicid >> 16) & 0xFFFFU; + db8500_id.revision = asicid & 0xFFU; +} + +bool cpu_is_u8500v10(void) +{ + return (db8500_id.revision == U8500_ASIC_REV_V10); +} + +bool cpu_is_u8500v11(void) +{ + return (db8500_id.revision == U8500_ASIC_REV_V11); +} + +bool cpu_is_u8500v20(void) +{ + return (db8500_id.revision == U8500_ASIC_REV_V20); +} + void __init u8500_map_io(void) { ux500_map_io(); @@ -63,6 +128,9 @@ void __init u8500_map_io(void) iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc)); else iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc)); + + /* Read out the ASIC ID as early as we can */ + get_db8500_asic_id(); } /* @@ -70,6 +138,20 @@ void __init u8500_map_io(void) */ void __init u8500_init_devices(void) { + /* Display some ASIC boilerplate */ + pr_info("DB8500: process: %02x, revision ID: 0x%02x\n", + db8500_id.process, db8500_id.revision); + if (cpu_is_u8500ed()) + pr_info("DB8500: Early Drop (ED)\n"); + else if (cpu_is_u8500v10()) + pr_info("DB8500: version 1.0\n"); + else if (cpu_is_u8500v11()) + pr_info("DB8500: version 1.1\n"); + else if (cpu_is_u8500v20()) + pr_info("DB8500: version 2.0\n"); + else + pr_warning("ASIC: UNKNOWN SILICON VERSION!\n"); + ux500_init_devices(); if (cpu_is_u8500ed()) diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 9280d2561111..40032fecbc16 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -110,6 +110,82 @@ struct platform_device u8500_i2c4_device = { .num_resources = ARRAY_SIZE(u8500_i2c4_resources), }; +/* + * SD/MMC + */ + +struct amba_device u8500_sdi0_device = { + .dev = { + .init_name = "sdi0", + }, + .res = { + .start = U8500_SDI0_BASE, + .end = U8500_SDI0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC0, NO_IRQ}, +}; + +struct amba_device u8500_sdi1_device = { + .dev = { + .init_name = "sdi1", + }, + .res = { + .start = U8500_SDI1_BASE, + .end = U8500_SDI1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC1, NO_IRQ}, +}; + +struct amba_device u8500_sdi2_device = { + .dev = { + .init_name = "sdi2", + }, + .res = { + .start = U8500_SDI2_BASE, + .end = U8500_SDI2_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC2, NO_IRQ}, +}; + +struct amba_device u8500_sdi3_device = { + .dev = { + .init_name = "sdi3", + }, + .res = { + .start = U8500_SDI3_BASE, + .end = U8500_SDI3_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC3, NO_IRQ}, +}; + +struct amba_device u8500_sdi4_device = { + .dev = { + .init_name = "sdi4", + }, + .res = { + .start = U8500_SDI4_BASE, + .end = U8500_SDI4_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC4, NO_IRQ}, +}; + +struct amba_device u8500_sdi5_device = { + .dev = { + .init_name = "sdi5", + }, + .res = { + .start = U8500_SDI5_BASE, + .end = U8500_SDI5_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC5, NO_IRQ}, +}; + static struct resource dma40_resources[] = { [0] = { .start = U8500_DMA_BASE, @@ -170,23 +246,23 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = { * Mapping between destination event lines and physical device address. * The event line is tied to a device and therefor the address is constant. */ -static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV]; +static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV]; /* Mapping between source event lines and physical device address */ -static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV]; +static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV]; /* Reserved event lines for memcpy only */ static int dma40_memcpy_event[] = { - STEDMA40_MEMCPY_TX_0, - STEDMA40_MEMCPY_TX_1, - STEDMA40_MEMCPY_TX_2, - STEDMA40_MEMCPY_TX_3, - STEDMA40_MEMCPY_TX_4, - STEDMA40_MEMCPY_TX_5, + DB8500_DMA_MEMCPY_TX_0, + DB8500_DMA_MEMCPY_TX_1, + DB8500_DMA_MEMCPY_TX_2, + DB8500_DMA_MEMCPY_TX_3, + DB8500_DMA_MEMCPY_TX_4, + DB8500_DMA_MEMCPY_TX_5, }; static struct stedma40_platform_data dma40_plat_data = { - .dev_len = STEDMA40_NR_DEV, + .dev_len = DB8500_DMA_NR_DEV, .dev_rx = dma40_rx_map, .dev_tx = dma40_tx_map, .memcpy = dma40_memcpy_event, diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c new file mode 100644 index 000000000000..b782a03024be --- /dev/null +++ b/arch/arm/mach-ux500/hotplug.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Based on ARM realview platform + * + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/completion.h> + +#include <asm/cacheflush.h> + +extern volatile int pen_release; + +static DECLARE_COMPLETION(cpu_killed); + +static inline void platform_do_lowpower(unsigned int cpu) +{ + flush_cache_all(); + + /* we put the platform to just WFI */ + for (;;) { + __asm__ __volatile__("dsb\n\t" "wfi\n\t" + : : : "memory"); + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ +#ifdef DEBUG + unsigned int this_cpu = hard_smp_processor_id(); + + if (cpu != this_cpu) { + printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n", + this_cpu, cpu); + BUG(); + } +#endif + + printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + complete(&cpu_killed); + + /* directly enter low power state, skipping secure registers */ + platform_do_lowpower(cpu); +} + +int platform_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index 545c80fc8024..3eafc0e24ba5 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -100,4 +100,18 @@ #define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) #define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) +#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000) +#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40) +#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F) +#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60) +#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F) +#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80) +#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F) +#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0) +#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF) +#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00) +#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F) +#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) +#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) + #endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index f000218210c9..f07d0986409d 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -30,8 +30,6 @@ #define U8500_ICN_BASE 0x81000000 #define U8500_BOOT_ROM_BASE 0x90000000 -/* ASIC ID is at 0xff4 offset within this region */ -#define U8500_ASIC_ID_BASE 0x9001F000 #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER5_BASE 0xa03e0000 diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index c2b2f2574947..33a120c2e82e 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -27,6 +27,13 @@ extern struct platform_device u8500_i2c0_device; extern struct platform_device u8500_i2c4_device; extern struct platform_device u8500_dma40_device; +extern struct amba_device u8500_sdi0_device; +extern struct amba_device u8500_sdi1_device; +extern struct amba_device u8500_sdi2_device; +extern struct amba_device u8500_sdi3_device; +extern struct amba_device u8500_sdi4_device; +extern struct amba_device u8500_sdi5_device; + void dma40_u8500ed_fixup(void); #endif diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 8656379a8309..32e883a8f2a2 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -104,16 +104,35 @@ static inline bool cpu_is_u8500(void) #endif } +#define CPUID_DB8500ED 0x410fc090 +#define CPUID_DB8500V1 0x411fc091 +#define CPUID_DB8500V2 0x412fc091 + static inline bool cpu_is_u8500ed(void) { - return cpu_is_u8500() && (read_cpuid_id() & 15) == 0; + return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500ED); } static inline bool cpu_is_u8500v1(void) { - return cpu_is_u8500() && (read_cpuid_id() & 15) == 1; + return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V1); +} + +static inline bool cpu_is_u8500v2(void) +{ + return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V2); } +#ifdef CONFIG_UX500_SOC_DB8500 +bool cpu_is_u8500v10(void); +bool cpu_is_u8500v11(void); +bool cpu_is_u8500v20(void); +#else +static inline bool cpu_is_u8500v10(void) { return false; } +static inline bool cpu_is_u8500v11(void) { return false; } +static inline bool cpu_is_u8500v20(void) { return false; } +#endif + static inline bool cpu_is_u5500(void) { #ifdef CONFIG_UX500_SOC_DB5500 diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h index 6fbfe5e2065a..bfa123dbec3b 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h @@ -61,6 +61,7 @@ #define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60) #define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61) #define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63) +#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65) #define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96) #define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98) #define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101) diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 10385bdc2b77..693aa57de88d 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -40,7 +40,8 @@ #define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) #define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) #define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) -#define IRQ_AB4500 (IRQ_SHPI_START + 40) +#define IRQ_AB8500 (IRQ_SHPI_START + 40) +#define IRQ_PRCMU (IRQ_SHPI_START + 47) #define IRQ_DISP (IRQ_SHPI_START + 48) #define IRQ_SiPI3 (IRQ_SHPI_START + 49) #define IRQ_I2C4 (IRQ_SHPI_START + 51) @@ -83,6 +84,19 @@ #include <mach/irqs-board-mop500.h> #endif -#define NR_IRQS IRQ_BOARD_END +/* + * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual + * IRQ:s representing modem IRQ:s can be allocated + */ +#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1) +#define IRQ_MODEM_EVENTS_NBR 72 +#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) + +/* List of virtual IRQ:s that are allocated from the range above */ +#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) +#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) +#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) + +#define NR_IRQS IRQ_MODEM_EVENTS_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox.h new file mode 100644 index 000000000000..7f9da4d2fbda --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/mbox.h @@ -0,0 +1,88 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. + * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __INC_STE_MBOX_H +#define __INC_STE_MBOX_H + +#define MBOX_BUF_SIZE 16 +#define MBOX_NAME_SIZE 8 + +/** + * mbox_recv_cb_t - Definition of the mailbox callback. + * @mbox_msg: The mailbox message. + * @priv: The clients private data as specified in the call to mbox_setup. + * + * This function will be called upon reception of new mailbox messages. + */ +typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv); + +/** + * struct mbox - Mailbox instance struct + * @list: Linked list head. + * @pdev: Pointer to device struct. + * @cb: Callback function. Will be called + * when new data is received. + * @client_data: Clients private data. Will be sent back + * in the callback function. + * @virtbase_peer: Virtual address for outgoing mailbox. + * @virtbase_local: Virtual address for incoming mailbox. + * @buffer: Then internal queue for outgoing messages. + * @name: Name of this mailbox. + * @buffer_available: Completion variable to achieve "blocking send". + * This variable will be signaled when there is + * internal buffer space available. + * @client_blocked: To keep track if any client is currently + * blocked. + * @lock: Spinlock to protect this mailbox instance. + * @write_index: Index in internal buffer to write to. + * @read_index: Index in internal buffer to read from. + * @allocated: Indicates whether this particular mailbox + * id has been allocated by someone. + */ +struct mbox { + struct list_head list; + struct platform_device *pdev; + mbox_recv_cb_t *cb; + void *client_data; + void __iomem *virtbase_peer; + void __iomem *virtbase_local; + u32 buffer[MBOX_BUF_SIZE]; + char name[MBOX_NAME_SIZE]; + struct completion buffer_available; + u8 client_blocked; + spinlock_t lock; + u8 write_index; + u8 read_index; + bool allocated; +}; + +/** + * mbox_setup - Set up a mailbox and return its instance. + * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU, + * 2 for modem DSP. + * @mbox_cb: Pointer to the callback function to be called when a new message + * is received. + * @priv: Client user data which will be returned in the callback. + * + * Returns a mailbox instance to be specified in subsequent calls to mbox_send. + */ +struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv); + +/** + * mbox_send - Send a mailbox message. + * @mbox: Mailbox instance (returned by mbox_setup) + * @mbox_msg: The mailbox message to send. + * @block: Specifies whether this call will block until send is possible, + * or return an error if the mailbox buffer is full. + * + * Returns 0 on success or a negative error code on error. -ENOMEM indicates + * that the internal buffer is full and you have to try again later (or + * specify "block" in order to block until send is possible). + */ +int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block); + +#endif /*INC_STE_MBOX_H*/ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h new file mode 100644 index 000000000000..8885f39a6421 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2009 ST-Ericsson SA + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ +#ifndef __MACH_PRCMU_REGS_H +#define __MACH_PRCMU_REGS_H + +#include <mach/hardware.h> + +#define _PRCMU_BASE IO_ADDRESS(U8500_PRCMU_BASE) + +#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) +#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) +#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) +#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) +#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) +#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) +#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) +#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) + +/* ARM WFI Standby signal register */ +#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) +#define PRCMU_IOCR (_PRCMU_BASE + 0x310) + +/* CPU mailbox registers */ +#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) +#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) +#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) + +/* Dual A9 core interrupt management unit registers */ +#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) +#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) +#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) +#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) +#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) +#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) +#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) +#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) +#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) +#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) +#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) + +#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) +#define ARM_WAKEUP_MODEM 0x1 + +#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) +#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) +#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) + +#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) +#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) +#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) +#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) +#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) +#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) +#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) +#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) + +/* System reset register */ +#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) + +/* Level shifter and clamp control registers */ +#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) +#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) + +/* PRCMU clock/PLL/reset registers */ +#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) +#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) +#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) +#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) +#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) +#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) +#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) +#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) +#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) +#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) + +/* ePOD and memory power signal control registers */ +#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) +#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) + +/* Debug power control unit registers */ +#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) + +/* Miscellaneous unit registers */ +#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) + +#endif /* __MACH_PRCMU__REGS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h new file mode 100644 index 000000000000..549843ff6dbe --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/prcmu.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * PRCMU f/w APIs + */ +#ifndef __MACH_PRCMU_H +#define __MACH_PRCMU_H + +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); + +#endif /* __MACH_PRCMU_H */ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index e978dbd9e210..54bbe648bf58 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -38,4 +38,11 @@ extern struct sys_timer ux500_timer; .type = MT_DEVICE, \ } +#define __MEM_DEV_DESC(x, sz) { \ + .virtual = IO_ADDRESS(x), \ + .pfn = __phys_to_pfn(x), \ + .length = sz, \ + .type = MT_MEMORY, \ +} + #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h index b59f7bc9725d..197e8417375e 100644 --- a/arch/arm/mach-ux500/include/mach/smp.h +++ b/arch/arm/mach-ux500/include/mach/smp.h @@ -10,18 +10,11 @@ #define ASMARM_ARCH_SMP_H #include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> /* This is required to wakeup the secondary core */ extern void u8500_secondary_startup(void); -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - /* * We use IRQ1 as the IPI */ diff --git a/arch/arm/mach-ux500/mbox.c b/arch/arm/mach-ux500/mbox.c new file mode 100644 index 000000000000..63435389c544 --- /dev/null +++ b/arch/arm/mach-ux500/mbox.c @@ -0,0 +1,567 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. + * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +/* + * Mailbox nomenclature: + * + * APE MODEM + * mbox pairX + * .......................... + * . . + * . peer . + * . send ---- . + * . --> | | . + * . | | . + * . ---- . + * . . + * . local . + * . rec ---- . + * . | | <-- . + * . | | . + * . ---- . + * ......................... + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/completion.h> +#include <mach/mbox.h> + +#define MBOX_NAME "mbox" + +#define MBOX_FIFO_DATA 0x000 +#define MBOX_FIFO_ADD 0x004 +#define MBOX_FIFO_REMOVE 0x008 +#define MBOX_FIFO_THRES_FREE 0x00C +#define MBOX_FIFO_THRES_OCCUP 0x010 +#define MBOX_FIFO_STATUS 0x014 + +#define MBOX_DISABLE_IRQ 0x4 +#define MBOX_ENABLE_IRQ 0x0 +#define MBOX_LATCH 1 + +/* Global list of all mailboxes */ +static struct list_head mboxs = LIST_HEAD_INIT(mboxs); + +static struct mbox *get_mbox_with_id(u8 id) +{ + u8 i; + struct list_head *pos = &mboxs; + for (i = 0; i <= id; i++) + pos = pos->next; + + return (struct mbox *) list_entry(pos, struct mbox, list); +} + +int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block) +{ + int res = 0; + + spin_lock(&mbox->lock); + + dev_dbg(&(mbox->pdev->dev), + "About to buffer 0x%X to mailbox 0x%X." + " ri = %d, wi = %d\n", + mbox_msg, (u32)mbox, mbox->read_index, + mbox->write_index); + + /* Check if write buffer is full */ + while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) { + if (!block) { + dev_dbg(&(mbox->pdev->dev), + "Buffer full in non-blocking call! " + "Returning -ENOMEM!\n"); + res = -ENOMEM; + goto exit; + } + spin_unlock(&mbox->lock); + dev_dbg(&(mbox->pdev->dev), + "Buffer full in blocking call! Sleeping...\n"); + mbox->client_blocked = 1; + wait_for_completion(&mbox->buffer_available); + dev_dbg(&(mbox->pdev->dev), + "Blocking send was woken up! Trying again...\n"); + spin_lock(&mbox->lock); + } + + mbox->buffer[mbox->write_index] = mbox_msg; + mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE; + + /* + * Indicate that we want an IRQ as soon as there is a slot + * in the FIFO + */ + writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + +exit: + spin_unlock(&mbox->lock); + return res; +} +EXPORT_SYMBOL(mbox_send); + +#if defined(CONFIG_DEBUG_FS) +/* + * Expected input: <value> <nbr sends> + * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times + */ +static ssize_t mbox_write_fifo(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + unsigned long mbox_mess; + unsigned long nbr_sends; + unsigned long i; + char int_buf[16]; + char *token; + char *val; + + struct mbox *mbox = (struct mbox *) dev->platform_data; + + strncpy((char *) &int_buf, buf, sizeof(int_buf)); + token = (char *) &int_buf; + + /* Parse message */ + val = strsep(&token, " "); + if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0)) + mbox_mess = 0xDEADBEEF; + + val = strsep(&token, " "); + if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0)) + nbr_sends = 1; + + dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n", + mbox_mess, nbr_sends, (u32) mbox); + + for (i = 0; i < nbr_sends; i++) + mbox_send(mbox, mbox_mess, true); + + return count; +} + +static ssize_t mbox_read_fifo(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int mbox_value; + struct mbox *mbox = (struct mbox *) dev->platform_data; + + if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0) + return sprintf(buf, "Mailbox is empty\n"); + + mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); + writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); + + return sprintf(buf, "0x%X\n", mbox_value); +} + +static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); + +static int mbox_show(struct seq_file *s, void *data) +{ + struct list_head *pos; + u8 mbox_index = 0; + + list_for_each(pos, &mboxs) { + struct mbox *m = + (struct mbox *) list_entry(pos, struct mbox, list); + if (m == NULL) { + seq_printf(s, + "Unable to retrieve mailbox %d\n", + mbox_index); + continue; + } + + spin_lock(&m->lock); + if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) { + seq_printf(s, "MAILBOX %d not setup or corrupt\n", + mbox_index); + spin_unlock(&m->lock); + continue; + } + + seq_printf(s, + "===========================\n" + " MAILBOX %d\n" + " PEER MAILBOX DUMP\n" + "---------------------------\n" + "FIFO: 0x%X (%d)\n" + "Free Threshold: 0x%.2X (%d)\n" + "Occupied Threshold: 0x%.2X (%d)\n" + "Status: 0x%.2X (%d)\n" + " Free spaces (ot): %d (%d)\n" + " Occup spaces (ot): %d (%d)\n" + "===========================\n" + " LOCAL MAILBOX DUMP\n" + "---------------------------\n" + "FIFO: 0x%.X (%d)\n" + "Free Threshold: 0x%.2X (%d)\n" + "Occupied Threshold: 0x%.2X (%d)\n" + "Status: 0x%.2X (%d)\n" + " Free spaces (ot): %d (%d)\n" + " Occup spaces (ot): %d (%d)\n" + "===========================\n" + "write_index: %d\n" + "read_index : %d\n" + "===========================\n" + "\n", + mbox_index, + readl(m->virtbase_peer + MBOX_FIFO_DATA), + readl(m->virtbase_peer + MBOX_FIFO_DATA), + readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_peer + MBOX_FIFO_STATUS), + readl(m->virtbase_peer + MBOX_FIFO_STATUS), + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7, + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1, + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7, + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1, + readl(m->virtbase_local + MBOX_FIFO_DATA), + readl(m->virtbase_local + MBOX_FIFO_DATA), + readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_local + MBOX_FIFO_STATUS), + readl(m->virtbase_local + MBOX_FIFO_STATUS), + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7, + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1, + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7, + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1, + m->write_index, m->read_index); + mbox_index++; + spin_unlock(&m->lock); + } + + return 0; +} + +static int mbox_open(struct inode *inode, struct file *file) +{ + return single_open(file, mbox_show, NULL); +} + +static const struct file_operations mbox_operations = { + .owner = THIS_MODULE, + .open = mbox_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +static irqreturn_t mbox_irq(int irq, void *arg) +{ + u32 mbox_value; + int nbr_occup; + int nbr_free; + struct mbox *mbox = (struct mbox *) arg; + + spin_lock(&mbox->lock); + + dev_dbg(&(mbox->pdev->dev), + "mbox IRQ [%d] received. ri = %d, wi = %d\n", + irq, mbox->read_index, mbox->write_index); + + /* + * Check if we have any outgoing messages, and if there is space for + * them in the FIFO. + */ + if (mbox->read_index != mbox->write_index) { + /* + * Check by reading FREE for LOCAL since that indicates + * OCCUP for PEER + */ + nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS) + >> 4) & 0x7; + dev_dbg(&(mbox->pdev->dev), + "Status indicates %d empty spaces in the FIFO!\n", + nbr_free); + + while ((nbr_free > 0) && + (mbox->read_index != mbox->write_index)) { + /* Write the message and latch it into the FIFO */ + writel(mbox->buffer[mbox->read_index], + (mbox->virtbase_peer + MBOX_FIFO_DATA)); + writel(MBOX_LATCH, + (mbox->virtbase_peer + MBOX_FIFO_ADD)); + dev_dbg(&(mbox->pdev->dev), + "Wrote message 0x%X to addr 0x%X\n", + mbox->buffer[mbox->read_index], + (u32) (mbox->virtbase_peer + MBOX_FIFO_DATA)); + + nbr_free--; + mbox->read_index = + (mbox->read_index + 1) % MBOX_BUF_SIZE; + } + + /* + * Check if we still want IRQ:s when there is free + * space to send + */ + if (mbox->read_index != mbox->write_index) { + dev_dbg(&(mbox->pdev->dev), + "Still have messages to send, but FIFO full. " + "Request IRQ again!\n"); + writel(MBOX_ENABLE_IRQ, + mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + } else { + dev_dbg(&(mbox->pdev->dev), + "No more messages to send. " + "Do not request IRQ again!\n"); + writel(MBOX_DISABLE_IRQ, + mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + } + + /* + * Check if we can signal any blocked clients that it is OK to + * start buffering again + */ + if (mbox->client_blocked && + (((mbox->write_index + 1) % MBOX_BUF_SIZE) + != mbox->read_index)) { + dev_dbg(&(mbox->pdev->dev), + "Waking up blocked client\n"); + complete(&mbox->buffer_available); + mbox->client_blocked = 0; + } + } + + /* Check if we have any incoming messages */ + nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7; + if (nbr_occup == 0) + goto exit; + + if (mbox->cb == NULL) { + dev_dbg(&(mbox->pdev->dev), "No receive callback registered, " + "leaving %d incoming messages in fifo!\n", nbr_occup); + goto exit; + } + + /* Read and acknowledge the message */ + mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); + writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); + + /* Notify consumer of new mailbox message */ + dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n", + mbox_value); + mbox->cb(mbox_value, mbox->client_data); + +exit: + dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n", + mbox->read_index, mbox->write_index); + spin_unlock(&mbox->lock); + + return IRQ_HANDLED; +} + +/* Setup is executed once for each mbox pair */ +struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv) +{ + struct resource *resource; + int irq; + int res; + struct mbox *mbox; + + mbox = get_mbox_with_id(mbox_id); + if (mbox == NULL) { + dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n", + mbox_id); + goto exit; + } + + /* + * Check if mailbox has been allocated to someone else, + * otherwise allocate it + */ + if (mbox->allocated) { + dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n", + mbox_id); + mbox = NULL; + goto exit; + } + mbox->allocated = true; + + dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n", + mbox_id, (u32)mbox); + + mbox->client_data = priv; + mbox->cb = mbox_cb; + + /* Get addr for peer mailbox and ioremap it */ + resource = platform_get_resource_byname(mbox->pdev, + IORESOURCE_MEM, + "mbox_peer"); + if (resource == NULL) { + dev_err(&(mbox->pdev->dev), + "Unable to retrieve mbox peer resource\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "Resource name: %s start: 0x%X, end: 0x%X\n", + resource->name, resource->start, resource->end); + mbox->virtbase_peer = + ioremap(resource->start, resource->end - resource->start); + if (!mbox->virtbase_peer) { + dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n", + resource->start, resource->end, (u32) mbox->virtbase_peer); + + /* Get addr for local mailbox and ioremap it */ + resource = platform_get_resource_byname(mbox->pdev, + IORESOURCE_MEM, + "mbox_local"); + if (resource == NULL) { + dev_err(&(mbox->pdev->dev), + "Unable to retrieve mbox local resource\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "Resource name: %s start: 0x%X, end: 0x%X\n", + resource->name, resource->start, resource->end); + mbox->virtbase_local = + ioremap(resource->start, resource->end - resource->start); + if (!mbox->virtbase_local) { + dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n", + resource->start, resource->end, (u32) mbox->virtbase_peer); + + init_completion(&mbox->buffer_available); + mbox->client_blocked = 0; + + /* Get IRQ for mailbox and allocate it */ + irq = platform_get_irq_byname(mbox->pdev, "mbox_irq"); + if (irq < 0) { + dev_err(&(mbox->pdev->dev), + "Unable to retrieve mbox irq resource\n"); + mbox = NULL; + goto exit; + } + + dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq); + res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox); + if (res < 0) { + dev_err(&(mbox->pdev->dev), + "Unable to allocate mbox irq %d\n", irq); + mbox = NULL; + goto exit; + } + + /* Set up mailbox to not launch IRQ on free space in mailbox */ + writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + + /* + * Set up mailbox to launch IRQ on new message if we have + * a callback set. If not, do not raise IRQ, but keep message + * in FIFO for manual retrieval + */ + if (mbox_cb != NULL) + writel(MBOX_ENABLE_IRQ, + mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); + else + writel(MBOX_DISABLE_IRQ, + mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); + +#if defined(CONFIG_DEBUG_FS) + res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo); + if (res != 0) + dev_warn(&(mbox->pdev->dev), + "Unable to create mbox sysfs entry"); + + (void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL, + NULL, &mbox_operations); +#endif + + dev_info(&(mbox->pdev->dev), + "Mailbox driver with index %d initated!\n", mbox_id); + +exit: + return mbox; +} +EXPORT_SYMBOL(mbox_setup); + + +int __init mbox_probe(struct platform_device *pdev) +{ + struct mbox local_mbox; + struct mbox *mbox; + int res = 0; + dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev); + + memset(&local_mbox, 0x0, sizeof(struct mbox)); + + /* Associate our mbox data with the platform device */ + res = platform_device_add_data(pdev, + (void *) &local_mbox, + sizeof(struct mbox)); + if (res != 0) { + dev_err(&(pdev->dev), + "Unable to allocate driver platform data!\n"); + goto exit; + } + + mbox = (struct mbox *) pdev->dev.platform_data; + mbox->pdev = pdev; + mbox->write_index = 0; + mbox->read_index = 0; + + INIT_LIST_HEAD(&(mbox->list)); + list_add_tail(&(mbox->list), &mboxs); + + sprintf(mbox->name, "%s", MBOX_NAME); + spin_lock_init(&mbox->lock); + + dev_info(&(pdev->dev), "Mailbox driver loaded\n"); + +exit: + return res; +} + +static struct platform_driver mbox_driver = { + .driver = { + .name = MBOX_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init mbox_init(void) +{ + return platform_driver_probe(&mbox_driver, mbox_probe); +} + +module_init(mbox_init); + +void __exit mbox_exit(void) +{ + platform_driver_unregister(&mbox_driver); +} + +module_exit(mbox_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MBOX driver"); diff --git a/arch/arm/mach-ux500/modem_irq.c b/arch/arm/mach-ux500/modem_irq.c new file mode 100644 index 000000000000..3187f8871169 --- /dev/null +++ b/arch/arm/mach-ux500/modem_irq.c @@ -0,0 +1,139 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. + * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> + +#define MODEM_INTCON_BASE_ADDR 0xBFFD3000 +#define MODEM_INTCON_SIZE 0xFFF + +#define DEST_IRQ41_OFFSET 0x2A4 +#define DEST_IRQ43_OFFSET 0x2AC +#define DEST_IRQ45_OFFSET 0x2B4 + +#define PRIO_IRQ41_OFFSET 0x6A4 +#define PRIO_IRQ43_OFFSET 0x6AC +#define PRIO_IRQ45_OFFSET 0x6B4 + +#define ALLOW_IRQ_OFFSET 0x104 + +#define MODEM_INTCON_CPU_NBR 0x1 +#define MODEM_INTCON_PRIO_HIGH 0x0 + +#define MODEM_INTCON_ALLOW_IRQ41 0x0200 +#define MODEM_INTCON_ALLOW_IRQ43 0x0800 +#define MODEM_INTCON_ALLOW_IRQ45 0x2000 + +#define MODEM_IRQ_REG_OFFSET 0x4 + +struct modem_irq { + void __iomem *modem_intcon_base; +}; + + +static void setup_modem_intcon(void __iomem *modem_intcon_base) +{ + /* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */ + writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET); + writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET); + writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET); + + /* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */ + writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET); + writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET); + writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET); + + /* IC_ALLOW_ARRAY - IRQ enable */ + writel(MODEM_INTCON_ALLOW_IRQ41 | + MODEM_INTCON_ALLOW_IRQ43 | + MODEM_INTCON_ALLOW_IRQ45, + modem_intcon_base + ALLOW_IRQ_OFFSET); +} + +static irqreturn_t modem_cpu_irq_handler(int irq, void *data) +{ + int real_irq; + int virt_irq; + struct modem_irq *mi = (struct modem_irq *)data; + + /* Read modem side IRQ number from modem IRQ controller */ + real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF; + virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq; + + pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X " + "which will be 0x%X (%d) which translates to " + "virtual IRQ 0x%X (%d)!\n", + (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET, + real_irq, + real_irq & 0xFF, + real_irq & 0xFF, + virt_irq, + virt_irq); + + if (virt_irq != 0) + generic_handle_irq(virt_irq); + + pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq); + + return IRQ_HANDLED; +} + +static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip) +{ + set_irq_chip(irq, modem_irq_chip); + set_irq_handler(irq, handle_simple_irq); + set_irq_flags(irq, IRQF_VALID); + + pr_debug("modem_irq: Created virtual IRQ %d\n", irq); +} + +static int modem_irq_init(void) +{ + int err; + static struct irq_chip modem_irq_chip; + struct modem_irq *mi; + + pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n", + IRQ_DB5500_MODEM); + + mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL); + if (!mi) { + pr_err("modem_irq: Could not allocate device\n"); + return -ENOMEM; + } + + mi->modem_intcon_base = + ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE); + pr_debug("modem_irq: ioremapped modem_intcon_base from " + "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR, + (u32)mi->modem_intcon_base); + + setup_modem_intcon(mi->modem_intcon_base); + + modem_irq_chip = dummy_irq_chip; + modem_irq_chip.name = "modem_irq"; + + /* Create the virtual IRQ:s needed */ + create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip); + create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip); + create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip); + + err = request_threaded_irq(IRQ_DB5500_MODEM, NULL, + modem_cpu_irq_handler, IRQF_ONESHOT, + "modem_irq", mi); + if (err) + pr_err("modem_irq: Could not register IRQ %d\n", + IRQ_DB5500_MODEM); + + return 0; +} + +arch_initcall(modem_irq_init); diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h new file mode 100644 index 000000000000..bf50c21fe69d --- /dev/null +++ b/arch/arm/mach-ux500/pins-db5500.h @@ -0,0 +1,620 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + */ + +#ifndef __MACH_DB5500_PINS_H +#define __MACH_DB5500_PINS_H + +#define GPIO0_GPIO PIN_CFG(0, GPIO) +#define GPIO0_SM_CS3n PIN_CFG(0, ALT_A) + +#define GPIO1_GPIO PIN_CFG(1, GPIO) +#define GPIO1_SM_A3 PIN_CFG(1, ALT_A) + +#define GPIO2_GPIO PIN_CFG(2, GPIO) +#define GPIO2_SM_A4 PIN_CFG(2, ALT_A) +#define GPIO2_SM_AVD PIN_CFG(2, ALT_B) + +#define GPIO3_GPIO PIN_CFG(3, GPIO) +#define GPIO3_I2C1_SCL PIN_CFG(3, ALT_A) + +#define GPIO4_GPIO PIN_CFG(4, GPIO) +#define GPIO4_I2C1_SDA PIN_CFG(4, ALT_A) + +#define GPIO5_GPIO PIN_CFG(5, GPIO) +#define GPIO5_MC0_DAT0 PIN_CFG(5, ALT_A) +#define GPIO5_SM_ADQ8 PIN_CFG(5, ALT_B) + +#define GPIO6_GPIO PIN_CFG(6, GPIO) +#define GPIO6_MC0_DAT1 PIN_CFG(6, ALT_A) +#define GPIO6_SM_ADQ0 PIN_CFG(6, ALT_B) + +#define GPIO7_GPIO PIN_CFG(7, GPIO) +#define GPIO7_MC0_DAT2 PIN_CFG(7, ALT_A) +#define GPIO7_SM_ADQ9 PIN_CFG(7, ALT_B) + +#define GPIO8_GPIO PIN_CFG(8, GPIO) +#define GPIO8_MC0_DAT3 PIN_CFG(8, ALT_A) +#define GPIO8_SM_ADQ1 PIN_CFG(8, ALT_B) + +#define GPIO9_GPIO PIN_CFG(9, GPIO) +#define GPIO9_MC0_DAT4 PIN_CFG(9, ALT_A) +#define GPIO9_SM_ADQ10 PIN_CFG(9, ALT_B) + +#define GPIO10_GPIO PIN_CFG(10, GPIO) +#define GPIO10_MC0_DAT5 PIN_CFG(10, ALT_A) +#define GPIO10_SM_ADQ2 PIN_CFG(10, ALT_B) + +#define GPIO11_GPIO PIN_CFG(11, GPIO) +#define GPIO11_MC0_DAT6 PIN_CFG(11, ALT_A) +#define GPIO11_SM_ADQ11 PIN_CFG(11, ALT_B) + +#define GPIO12_GPIO PIN_CFG(12, GPIO) +#define GPIO12_MC0_DAT7 PIN_CFG(12, ALT_A) +#define GPIO12_SM_ADQ3 PIN_CFG(12, ALT_B) + +#define GPIO13_GPIO PIN_CFG(13, GPIO) +#define GPIO13_MC0_CMD PIN_CFG(13, ALT_A) +#define GPIO13_SM_BUSY0n PIN_CFG(13, ALT_B) +#define GPIO13_SM_WAIT0n PIN_CFG(13, ALT_C) + +#define GPIO14_GPIO PIN_CFG(14, GPIO) +#define GPIO14_MC0_CLK PIN_CFG(14, ALT_A) +#define GPIO14_SM_CS1n PIN_CFG(14, ALT_B) +#define GPIO14_SM_CKO PIN_CFG(14, ALT_C) + +#define GPIO15_GPIO PIN_CFG(15, GPIO) +#define GPIO15_SM_A5 PIN_CFG(15, ALT_A) +#define GPIO15_SM_CLE PIN_CFG(15, ALT_B) + +#define GPIO16_GPIO PIN_CFG(16, GPIO) +#define GPIO16_MC2_CMD PIN_CFG(16, ALT_A) +#define GPIO16_SM_OEn PIN_CFG(16, ALT_B) + +#define GPIO17_GPIO PIN_CFG(17, GPIO) +#define GPIO17_MC2_CLK PIN_CFG(17, ALT_A) +#define GPIO17_SM_WEn PIN_CFG(17, ALT_B) + +#define GPIO18_GPIO PIN_CFG(18, GPIO) +#define GPIO18_SM_A6 PIN_CFG(18, ALT_A) +#define GPIO18_SM_ALE PIN_CFG(18, ALT_B) +#define GPIO18_SM_AVDn PIN_CFG(18, ALT_C) + +#define GPIO19_GPIO PIN_CFG(19, GPIO) +#define GPIO19_MC2_DAT1 PIN_CFG(19, ALT_A) +#define GPIO19_SM_ADQ4 PIN_CFG(19, ALT_B) + +#define GPIO20_GPIO PIN_CFG(20, GPIO) +#define GPIO20_MC2_DAT3 PIN_CFG(20, ALT_A) +#define GPIO20_SM_ADQ5 PIN_CFG(20, ALT_B) + +#define GPIO21_GPIO PIN_CFG(21, GPIO) +#define GPIO21_MC2_DAT5 PIN_CFG(21, ALT_A) +#define GPIO21_SM_ADQ6 PIN_CFG(21, ALT_B) + +#define GPIO22_GPIO PIN_CFG(22, GPIO) +#define GPIO22_MC2_DAT7 PIN_CFG(22, ALT_A) +#define GPIO22_SM_ADQ7 PIN_CFG(22, ALT_B) + +#define GPIO23_GPIO PIN_CFG(23, GPIO) +#define GPIO23_MC2_DAT0 PIN_CFG(23, ALT_A) +#define GPIO23_SM_ADQ12 PIN_CFG(23, ALT_B) +#define GPIO23_MC0_DAT1 PIN_CFG(23, ALT_C) + +#define GPIO24_GPIO PIN_CFG(24, GPIO) +#define GPIO24_MC2_DAT2 PIN_CFG(24, ALT_A) +#define GPIO24_SM_ADQ13 PIN_CFG(24, ALT_B) +#define GPIO24_MC0_DAT3 PIN_CFG(24, ALT_C) + +#define GPIO25_GPIO PIN_CFG(25, GPIO) +#define GPIO25_MC2_DAT4 PIN_CFG(25, ALT_A) +#define GPIO25_SM_ADQ14 PIN_CFG(25, ALT_B) +#define GPIO25_MC0_CMD PIN_CFG(25, ALT_C) + +#define GPIO26_GPIO PIN_CFG(26, GPIO) +#define GPIO26_MC2_DAT6 PIN_CFG(26, ALT_A) +#define GPIO26_SM_ADQ15 PIN_CFG(26, ALT_B) + +#define GPIO27_GPIO PIN_CFG(27, GPIO) +#define GPIO27_SM_CS0n PIN_CFG(27, ALT_A) +#define GPIO27_SM_PS0n PIN_CFG(27, ALT_B) + +#define GPIO28_GPIO PIN_CFG(28, GPIO) +#define GPIO28_U0_TXD PIN_CFG(28, ALT_A) +#define GPIO28_SM_A0 PIN_CFG(28, ALT_B) + +#define GPIO29_GPIO PIN_CFG(29, GPIO) +#define GPIO29_U0_RXD PIN_CFG(29, ALT_A) +#define GPIO29_SM_A1 PIN_CFG(29, ALT_B) +#define GPIO29_PWM_0 PIN_CFG(29, ALT_C) + +#define GPIO30_GPIO PIN_CFG(30, GPIO) +#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) +#define GPIO30_SM_A2 PIN_CFG(30, ALT_B) +#define GPIO30_PWM_1 PIN_CFG(30, ALT_C) + +#define GPIO31_GPIO PIN_CFG(31, GPIO) +#define GPIO31_MC0_DAT7 PIN_CFG(31, ALT_A) +#define GPIO31_SM_CS2n PIN_CFG(31, ALT_B) +#define GPIO31_PWM_2 PIN_CFG(31, ALT_C) + +#define GPIO32_GPIO PIN_CFG(32, GPIO) +#define GPIO32_MSP0_TCK PIN_CFG(32, ALT_A) +#define GPIO32_ACCI2S0_SCK PIN_CFG(32, ALT_B) + +#define GPIO33_GPIO PIN_CFG(33, GPIO) +#define GPIO33_MSP0_TFS PIN_CFG(33, ALT_A) +#define GPIO33_ACCI2S0_WS PIN_CFG(33, ALT_B) + +#define GPIO34_GPIO PIN_CFG(34, GPIO) +#define GPIO34_MSP0_TXD PIN_CFG(34, ALT_A) +#define GPIO34_ACCI2S0_DLD PIN_CFG(34, ALT_B) + +#define GPIO35_GPIO PIN_CFG(35, GPIO) +#define GPIO35_MSP0_RXD PIN_CFG(35, ALT_A) +#define GPIO35_ACCI2S0_ULD PIN_CFG(35, ALT_B) + +#define GPIO64_GPIO PIN_CFG(64, GPIO) +#define GPIO64_USB_DAT0 PIN_CFG(64, ALT_A) +#define GPIO64_U0_TXD PIN_CFG(64, ALT_B) + +#define GPIO65_GPIO PIN_CFG(65, GPIO) +#define GPIO65_USB_DAT1 PIN_CFG(65, ALT_A) +#define GPIO65_U0_RXD PIN_CFG(65, ALT_B) + +#define GPIO66_GPIO PIN_CFG(66, GPIO) +#define GPIO66_USB_DAT2 PIN_CFG(66, ALT_A) + +#define GPIO67_GPIO PIN_CFG(67, GPIO) +#define GPIO67_USB_DAT3 PIN_CFG(67, ALT_A) + +#define GPIO68_GPIO PIN_CFG(68, GPIO) +#define GPIO68_USB_DAT4 PIN_CFG(68, ALT_A) + +#define GPIO69_GPIO PIN_CFG(69, GPIO) +#define GPIO69_USB_DAT5 PIN_CFG(69, ALT_A) + +#define GPIO70_GPIO PIN_CFG(70, GPIO) +#define GPIO70_USB_DAT6 PIN_CFG(70, ALT_A) + +#define GPIO71_GPIO PIN_CFG(71, GPIO) +#define GPIO71_USB_DAT7 PIN_CFG(71, ALT_A) + +#define GPIO72_GPIO PIN_CFG(72, GPIO) +#define GPIO72_USB_STP PIN_CFG(72, ALT_A) + +#define GPIO73_GPIO PIN_CFG(73, GPIO) +#define GPIO73_USB_DIR PIN_CFG(73, ALT_A) + +#define GPIO74_GPIO PIN_CFG(74, GPIO) +#define GPIO74_USB_NXT PIN_CFG(74, ALT_A) + +#define GPIO75_GPIO PIN_CFG(75, GPIO) +#define GPIO75_USB_XCLK PIN_CFG(75, ALT_A) + +#define GPIO76_GPIO PIN_CFG(76, GPIO) + +#define GPIO77_GPIO PIN_CFG(77, GPIO) +#define GPIO77_ACCTX_ON PIN_CFG(77, ALT_A) + +#define GPIO78_GPIO PIN_CFG(78, GPIO) +#define GPIO78_IRQn PIN_CFG(78, ALT_A) + +#define GPIO79_GPIO PIN_CFG(79, GPIO) +#define GPIO79_ACCSIM_Clk PIN_CFG(79, ALT_A) + +#define GPIO80_GPIO PIN_CFG(80, GPIO) +#define GPIO80_ACCSIM_Da PIN_CFG(80, ALT_A) + +#define GPIO81_GPIO PIN_CFG(81, GPIO) +#define GPIO81_ACCSIM_Reset PIN_CFG(81, ALT_A) + +#define GPIO82_GPIO PIN_CFG(82, GPIO) +#define GPIO82_ACCSIM_DDir PIN_CFG(82, ALT_A) + +#define GPIO96_GPIO PIN_CFG(96, GPIO) +#define GPIO96_MSP1_TCK PIN_CFG(96, ALT_A) +#define GPIO96_PRCMU_DEBUG3 PIN_CFG(96, ALT_B) +#define GPIO96_PRCMU_DEBUG7 PIN_CFG(96, ALT_C) + +#define GPIO97_GPIO PIN_CFG(97, GPIO) +#define GPIO97_MSP1_TFS PIN_CFG(97, ALT_A) +#define GPIO97_PRCMU_DEBUG2 PIN_CFG(97, ALT_B) +#define GPIO97_PRCMU_DEBUG6 PIN_CFG(97, ALT_C) + +#define GPIO98_GPIO PIN_CFG(98, GPIO) +#define GPIO98_MSP1_TXD PIN_CFG(98, ALT_A) +#define GPIO98_PRCMU_DEBUG1 PIN_CFG(98, ALT_B) +#define GPIO98_PRCMU_DEBUG5 PIN_CFG(98, ALT_C) + +#define GPIO99_GPIO PIN_CFG(99, GPIO) +#define GPIO99_MSP1_RXD PIN_CFG(99, ALT_A) +#define GPIO99_PRCMU_DEBUG0 PIN_CFG(99, ALT_B) +#define GPIO99_PRCMU_DEBUG4 PIN_CFG(99, ALT_C) + +#define GPIO100_GPIO PIN_CFG(100, GPIO) +#define GPIO100_I2C0_SCL PIN_CFG(100, ALT_A) + +#define GPIO101_GPIO PIN_CFG(101, GPIO) +#define GPIO101_I2C0_SDA PIN_CFG(101, ALT_A) + +#define GPIO128_GPIO PIN_CFG(128, GPIO) +#define GPIO128_KP_I0 PIN_CFG(128, ALT_A) +#define GPIO128_BUSMON_D0 PIN_CFG(128, ALT_B) + +#define GPIO129_GPIO PIN_CFG(129, GPIO) +#define GPIO129_KP_O0 PIN_CFG(129, ALT_A) +#define GPIO129_BUSMON_D1 PIN_CFG(129, ALT_B) + +#define GPIO130_GPIO PIN_CFG(130, GPIO) +#define GPIO130_KP_I1 PIN_CFG(130, ALT_A) +#define GPIO130_BUSMON_D2 PIN_CFG(130, ALT_B) + +#define GPIO131_GPIO PIN_CFG(131, GPIO) +#define GPIO131_KP_O1 PIN_CFG(131, ALT_A) +#define GPIO131_BUSMON_D3 PIN_CFG(131, ALT_B) + +#define GPIO132_GPIO PIN_CFG(132, GPIO) +#define GPIO132_KP_I2 PIN_CFG(132, ALT_A) +#define GPIO132_ETM_D15 PIN_CFG(132, ALT_B) +#define GPIO132_STMAPE_CLK PIN_CFG(132, ALT_C) + +#define GPIO133_GPIO PIN_CFG(133, GPIO) +#define GPIO133_KP_O2 PIN_CFG(133, ALT_A) +#define GPIO133_ETM_D14 PIN_CFG(133, ALT_B) +#define GPIO133_U0_RXD PIN_CFG(133, ALT_C) + +#define GPIO134_GPIO PIN_CFG(134, GPIO) +#define GPIO134_KP_I3 PIN_CFG(134, ALT_A) +#define GPIO134_ETM_D13 PIN_CFG(134, ALT_B) +#define GPIO134_STMAPE_DAT0 PIN_CFG(134, ALT_C) + +#define GPIO135_GPIO PIN_CFG(135, GPIO) +#define GPIO135_KP_O3 PIN_CFG(135, ALT_A) +#define GPIO135_ETM_D12 PIN_CFG(135, ALT_B) +#define GPIO135_STMAPE_DAT1 PIN_CFG(135, ALT_C) + +#define GPIO136_GPIO PIN_CFG(136, GPIO) +#define GPIO136_KP_I4 PIN_CFG(136, ALT_A) +#define GPIO136_ETM_D11 PIN_CFG(136, ALT_B) +#define GPIO136_STMAPE_DAT2 PIN_CFG(136, ALT_C) + +#define GPIO137_GPIO PIN_CFG(137, GPIO) +#define GPIO137_KP_O4 PIN_CFG(137, ALT_A) +#define GPIO137_ETM_D10 PIN_CFG(137, ALT_B) +#define GPIO137_STMAPE_DAT3 PIN_CFG(137, ALT_C) + +#define GPIO138_GPIO PIN_CFG(138, GPIO) +#define GPIO138_KP_I5 PIN_CFG(138, ALT_A) +#define GPIO138_ETM_D9 PIN_CFG(138, ALT_B) +#define GPIO138_U0_TXD PIN_CFG(138, ALT_C) + +#define GPIO139_GPIO PIN_CFG(139, GPIO) +#define GPIO139_KP_O5 PIN_CFG(139, ALT_A) +#define GPIO139_ETM_D8 PIN_CFG(139, ALT_B) +#define GPIO139_BUSMON_D11 PIN_CFG(139, ALT_C) + +#define GPIO140_GPIO PIN_CFG(140, GPIO) +#define GPIO140_KP_I6 PIN_CFG(140, ALT_A) +#define GPIO140_ETM_D7 PIN_CFG(140, ALT_B) +#define GPIO140_STMAPE_CLK PIN_CFG(140, ALT_C) + +#define GPIO141_GPIO PIN_CFG(141, GPIO) +#define GPIO141_KP_O6 PIN_CFG(141, ALT_A) +#define GPIO141_ETM_D6 PIN_CFG(141, ALT_B) +#define GPIO141_U0_RXD PIN_CFG(141, ALT_C) + +#define GPIO142_GPIO PIN_CFG(142, GPIO) +#define GPIO142_KP_I7 PIN_CFG(142, ALT_A) +#define GPIO142_ETM_D5 PIN_CFG(142, ALT_B) +#define GPIO142_STMAPE_DAT0 PIN_CFG(142, ALT_C) + +#define GPIO143_GPIO PIN_CFG(143, GPIO) +#define GPIO143_KP_O7 PIN_CFG(143, ALT_A) +#define GPIO143_ETM_D4 PIN_CFG(143, ALT_B) +#define GPIO143_STMAPE_DAT1 PIN_CFG(143, ALT_C) + +#define GPIO144_GPIO PIN_CFG(144, GPIO) +#define GPIO144_I2C3_SCL PIN_CFG(144, ALT_A) +#define GPIO144_ETM_D3 PIN_CFG(144, ALT_B) +#define GPIO144_STMAPE_DAT2 PIN_CFG(144, ALT_C) + +#define GPIO145_GPIO PIN_CFG(145, GPIO) +#define GPIO145_I2C3_SDA PIN_CFG(145, ALT_A) +#define GPIO145_ETM_D2 PIN_CFG(145, ALT_B) +#define GPIO145_STMAPE_DAT3 PIN_CFG(145, ALT_C) + +#define GPIO146_GPIO PIN_CFG(146, GPIO) +#define GPIO146_PWM_0 PIN_CFG(146, ALT_A) +#define GPIO146_ETM_D1 PIN_CFG(146, ALT_B) + +#define GPIO147_GPIO PIN_CFG(147, GPIO) +#define GPIO147_PWM_1 PIN_CFG(147, ALT_A) +#define GPIO147_ETM_D0 PIN_CFG(147, ALT_B) + +#define GPIO148_GPIO PIN_CFG(148, GPIO) +#define GPIO148_PWM_2 PIN_CFG(148, ALT_A) +#define GPIO148_ETM_CLK PIN_CFG(148, ALT_B) + +#define GPIO160_GPIO PIN_CFG(160, GPIO) +#define GPIO160_CLKOUT_REQn PIN_CFG(160, ALT_A) + +#define GPIO161_GPIO PIN_CFG(161, GPIO) +#define GPIO161_CLKOUT_0 PIN_CFG(161, ALT_A) + +#define GPIO162_GPIO PIN_CFG(162, GPIO) +#define GPIO162_CLKOUT_1 PIN_CFG(162, ALT_A) + +#define GPIO163_GPIO PIN_CFG(163, GPIO) + +#define GPIO164_GPIO PIN_CFG(164, GPIO) +#define GPIO164_GPS_START PIN_CFG(164, ALT_A) + +#define GPIO165_GPIO PIN_CFG(165, GPIO) +#define GPIO165_SPI1_CS2n PIN_CFG(165, ALT_A) +#define GPIO165_U3_RXD PIN_CFG(165, ALT_B) +#define GPIO165_BUSMON_D20 PIN_CFG(165, ALT_C) + +#define GPIO166_GPIO PIN_CFG(166, GPIO) +#define GPIO166_SPI1_CS1n PIN_CFG(166, ALT_A) +#define GPIO166_U3_TXD PIN_CFG(166, ALT_B) +#define GPIO166_BUSMON_D21 PIN_CFG(166, ALT_C) + +#define GPIO167_GPIO PIN_CFG(167, GPIO) +#define GPIO167_SPI1_CS0n PIN_CFG(167, ALT_A) +#define GPIO167_U3_RTSn PIN_CFG(167, ALT_B) +#define GPIO167_BUSMON_D22 PIN_CFG(167, ALT_C) + +#define GPIO168_GPIO PIN_CFG(168, GPIO) +#define GPIO168_SPI1_RXD PIN_CFG(168, ALT_A) +#define GPIO168_U3_CTSn PIN_CFG(168, ALT_B) +#define GPIO168_BUSMON_D23 PIN_CFG(168, ALT_C) + +#define GPIO169_GPIO PIN_CFG(169, GPIO) +#define GPIO169_SPI1_TXD PIN_CFG(169, ALT_A) +#define GPIO169_DDR_RC PIN_CFG(169, ALT_B) +#define GPIO169_BUSMON_D24 PIN_CFG(169, ALT_C) + +#define GPIO170_GPIO PIN_CFG(170, GPIO) +#define GPIO170_SPI1_CLK PIN_CFG(170, ALT_A) + +#define GPIO171_GPIO PIN_CFG(171, GPIO) +#define GPIO171_MC3_DAT0 PIN_CFG(171, ALT_A) +#define GPIO171_SPI3_RXD PIN_CFG(171, ALT_B) +#define GPIO171_BUSMON_D25 PIN_CFG(171, ALT_C) + +#define GPIO172_GPIO PIN_CFG(172, GPIO) +#define GPIO172_MC3_DAT1 PIN_CFG(172, ALT_A) +#define GPIO172_SPI3_CS1n PIN_CFG(172, ALT_B) +#define GPIO172_BUSMON_D26 PIN_CFG(172, ALT_C) + +#define GPIO173_GPIO PIN_CFG(173, GPIO) +#define GPIO173_MC3_DAT2 PIN_CFG(173, ALT_A) +#define GPIO173_SPI3_CS2n PIN_CFG(173, ALT_B) +#define GPIO173_BUSMON_D27 PIN_CFG(173, ALT_C) + +#define GPIO174_GPIO PIN_CFG(174, GPIO) +#define GPIO174_MC3_DAT3 PIN_CFG(174, ALT_A) +#define GPIO174_SPI3_CS0n PIN_CFG(174, ALT_B) +#define GPIO174_BUSMON_D28 PIN_CFG(174, ALT_C) + +#define GPIO175_GPIO PIN_CFG(175, GPIO) +#define GPIO175_MC3_CMD PIN_CFG(175, ALT_A) +#define GPIO175_SPI3_TXD PIN_CFG(175, ALT_B) +#define GPIO175_BUSMON_D29 PIN_CFG(175, ALT_C) + +#define GPIO176_GPIO PIN_CFG(176, GPIO) +#define GPIO176_MC3_CLK PIN_CFG(176, ALT_A) +#define GPIO176_SPI3_CLK PIN_CFG(176, ALT_B) + +#define GPIO177_GPIO PIN_CFG(177, GPIO) +#define GPIO177_U2_RXD PIN_CFG(177, ALT_A) +#define GPIO177_I2C3_SCL PIN_CFG(177, ALT_B) +#define GPIO177_BUSMON_D30 PIN_CFG(177, ALT_C) + +#define GPIO178_GPIO PIN_CFG(178, GPIO) +#define GPIO178_U2_TXD PIN_CFG(178, ALT_A) +#define GPIO178_I2C3_SDA PIN_CFG(178, ALT_B) +#define GPIO178_BUSMON_D31 PIN_CFG(178, ALT_C) + +#define GPIO179_GPIO PIN_CFG(179, GPIO) +#define GPIO179_U2_CTSn PIN_CFG(179, ALT_A) +#define GPIO179_U3_RXD PIN_CFG(179, ALT_B) +#define GPIO179_BUSMON_D32 PIN_CFG(179, ALT_C) + +#define GPIO180_GPIO PIN_CFG(180, GPIO) +#define GPIO180_U2_RTSn PIN_CFG(180, ALT_A) +#define GPIO180_U3_TXD PIN_CFG(180, ALT_B) +#define GPIO180_BUSMON_D33 PIN_CFG(180, ALT_C) + +#define GPIO185_GPIO PIN_CFG(185, GPIO) +#define GPIO185_SPI3_CS2n PIN_CFG(185, ALT_A) +#define GPIO185_MC4_DAT0 PIN_CFG(185, ALT_B) + +#define GPIO186_GPIO PIN_CFG(186, GPIO) +#define GPIO186_SPI3_CS1n PIN_CFG(186, ALT_A) +#define GPIO186_MC4_DAT1 PIN_CFG(186, ALT_B) + +#define GPIO187_GPIO PIN_CFG(187, GPIO) +#define GPIO187_SPI3_CS0n PIN_CFG(187, ALT_A) +#define GPIO187_MC4_DAT2 PIN_CFG(187, ALT_B) + +#define GPIO188_GPIO PIN_CFG(188, GPIO) +#define GPIO188_SPI3_RXD PIN_CFG(188, ALT_A) +#define GPIO188_MC4_DAT3 PIN_CFG(188, ALT_B) + +#define GPIO189_GPIO PIN_CFG(189, GPIO) +#define GPIO189_SPI3_TXD PIN_CFG(189, ALT_A) +#define GPIO189_MC4_CMD PIN_CFG(189, ALT_B) + +#define GPIO190_GPIO PIN_CFG(190, GPIO) +#define GPIO190_SPI3_CLK PIN_CFG(190, ALT_A) +#define GPIO190_MC4_CLK PIN_CFG(190, ALT_B) + +#define GPIO191_GPIO PIN_CFG(191, GPIO) +#define GPIO191_MC1_DAT0 PIN_CFG(191, ALT_A) +#define GPIO191_MC4_DAT4 PIN_CFG(191, ALT_B) +#define GPIO191_STMAPE_DAT0 PIN_CFG(191, ALT_C) + +#define GPIO192_GPIO PIN_CFG(192, GPIO) +#define GPIO192_MC1_DAT1 PIN_CFG(192, ALT_A) +#define GPIO192_MC4_DAT5 PIN_CFG(192, ALT_B) +#define GPIO192_STMAPE_DAT1 PIN_CFG(192, ALT_C) + +#define GPIO193_GPIO PIN_CFG(193, GPIO) +#define GPIO193_MC1_DAT2 PIN_CFG(193, ALT_A) +#define GPIO193_MC4_DAT6 PIN_CFG(193, ALT_B) +#define GPIO193_STMAPE_DAT2 PIN_CFG(193, ALT_C) + +#define GPIO194_GPIO PIN_CFG(194, GPIO) +#define GPIO194_MC1_DAT3 PIN_CFG(194, ALT_A) +#define GPIO194_MC4_DAT7 PIN_CFG(194, ALT_B) +#define GPIO194_STMAPE_DAT3 PIN_CFG(194, ALT_C) + +#define GPIO195_GPIO PIN_CFG(195, GPIO) +#define GPIO195_MC1_CLK PIN_CFG(195, ALT_A) +#define GPIO195_STMAPE_CLK PIN_CFG(195, ALT_B) +#define GPIO195_BUSMON_CLK PIN_CFG(195, ALT_C) + +#define GPIO196_GPIO PIN_CFG(196, GPIO) +#define GPIO196_MC1_CMD PIN_CFG(196, ALT_A) +#define GPIO196_U0_RXD PIN_CFG(196, ALT_B) +#define GPIO196_BUSMON_D38 PIN_CFG(196, ALT_C) + +#define GPIO197_GPIO PIN_CFG(197, GPIO) +#define GPIO197_MC1_CMDDIR PIN_CFG(197, ALT_A) +#define GPIO197_BUSMON_D39 PIN_CFG(197, ALT_B) + +#define GPIO198_GPIO PIN_CFG(198, GPIO) +#define GPIO198_MC1_FBCLK PIN_CFG(198, ALT_A) + +#define GPIO199_GPIO PIN_CFG(199, GPIO) +#define GPIO199_MC1_DAT0DIR PIN_CFG(199, ALT_A) +#define GPIO199_BUSMON_D40 PIN_CFG(199, ALT_B) + +#define GPIO200_GPIO PIN_CFG(200, GPIO) +#define GPIO200_U1_TXD PIN_CFG(200, ALT_A) +#define GPIO200_ACCU0_RTSn PIN_CFG(200, ALT_B) + +#define GPIO201_GPIO PIN_CFG(201, GPIO) +#define GPIO201_U1_RXD PIN_CFG(201, ALT_A) +#define GPIO201_ACCU0_CTSn PIN_CFG(201, ALT_B) + +#define GPIO202_GPIO PIN_CFG(202, GPIO) +#define GPIO202_U1_CTSn PIN_CFG(202, ALT_A) +#define GPIO202_ACCU0_RXD PIN_CFG(202, ALT_B) + +#define GPIO203_GPIO PIN_CFG(203, GPIO) +#define GPIO203_U1_RTSn PIN_CFG(203, ALT_A) +#define GPIO203_ACCU0_TXD PIN_CFG(203, ALT_B) + +#define GPIO204_GPIO PIN_CFG(204, GPIO) +#define GPIO204_SPI0_CS2n PIN_CFG(204, ALT_A) +#define GPIO204_ACCGPIO_000 PIN_CFG(204, ALT_B) +#define GPIO204_LCD_VSI1 PIN_CFG(204, ALT_C) + +#define GPIO205_GPIO PIN_CFG(205, GPIO) +#define GPIO205_SPI0_CS1n PIN_CFG(205, ALT_A) +#define GPIO205_ACCGPIO_001 PIN_CFG(205, ALT_B) +#define GPIO205_LCD_D3 PIN_CFG(205, ALT_C) + +#define GPIO206_GPIO PIN_CFG(206, GPIO) +#define GPIO206_SPI0_CS0n PIN_CFG(206, ALT_A) +#define GPIO206_ACCGPIO_002 PIN_CFG(206, ALT_B) +#define GPIO206_LCD_D2 PIN_CFG(206, ALT_C) + +#define GPIO207_GPIO PIN_CFG(207, GPIO) +#define GPIO207_SPI0_RXD PIN_CFG(207, ALT_A) +#define GPIO207_ACCGPIO_003 PIN_CFG(207, ALT_B) +#define GPIO207_LCD_D1 PIN_CFG(207, ALT_C) + +#define GPIO208_GPIO PIN_CFG(208, GPIO) +#define GPIO208_SPI0_TXD PIN_CFG(208, ALT_A) +#define GPIO208_ACCGPIO_004 PIN_CFG(208, ALT_B) +#define GPIO208_LCD_D0 PIN_CFG(208, ALT_C) + +#define GPIO209_GPIO PIN_CFG(209, GPIO) +#define GPIO209_SPI0_CLK PIN_CFG(209, ALT_A) +#define GPIO209_ACCGPIO_005 PIN_CFG(209, ALT_B) +#define GPIO209_LCD_CLK PIN_CFG(209, ALT_C) + +#define GPIO210_GPIO PIN_CFG(210, GPIO) +#define GPIO210_LCD_VSO PIN_CFG(210, ALT_A) +#define GPIO210_PRCMU_PWRCTRL1 PIN_CFG(210, ALT_B) + +#define GPIO211_GPIO PIN_CFG(211, GPIO) +#define GPIO211_LCD_VSI0 PIN_CFG(211, ALT_A) +#define GPIO211_PRCMU_PWRCTRL2 PIN_CFG(211, ALT_B) + +#define GPIO212_GPIO PIN_CFG(212, GPIO) +#define GPIO212_SPI2_CS2n PIN_CFG(212, ALT_A) +#define GPIO212_LCD_HSO PIN_CFG(212, ALT_B) + +#define GPIO213_GPIO PIN_CFG(213, GPIO) +#define GPIO213_SPI2_CS1n PIN_CFG(213, ALT_A) +#define GPIO213_LCD_DE PIN_CFG(213, ALT_B) +#define GPIO213_BUSMON_D16 PIN_CFG(213, ALT_C) + +#define GPIO214_GPIO PIN_CFG(214, GPIO) +#define GPIO214_SPI2_CS0n PIN_CFG(214, ALT_A) +#define GPIO214_LCD_D7 PIN_CFG(214, ALT_B) +#define GPIO214_BUSMON_D17 PIN_CFG(214, ALT_C) + +#define GPIO215_GPIO PIN_CFG(215, GPIO) +#define GPIO215_SPI2_RXD PIN_CFG(215, ALT_A) +#define GPIO215_LCD_D6 PIN_CFG(215, ALT_B) +#define GPIO215_BUSMON_D18 PIN_CFG(215, ALT_C) + +#define GPIO216_GPIO PIN_CFG(216, GPIO) +#define GPIO216_SPI2_CLK PIN_CFG(216, ALT_A) +#define GPIO216_LCD_D5 PIN_CFG(216, ALT_B) + +#define GPIO217_GPIO PIN_CFG(217, GPIO) +#define GPIO217_SPI2_TXD PIN_CFG(217, ALT_A) +#define GPIO217_LCD_D4 PIN_CFG(217, ALT_B) +#define GPIO217_BUSMON_D19 PIN_CFG(217, ALT_C) + +#define GPIO218_GPIO PIN_CFG(218, GPIO) +#define GPIO218_I2C2_SCL PIN_CFG(218, ALT_A) +#define GPIO218_LCD_VSO PIN_CFG(218, ALT_B) + +#define GPIO219_GPIO PIN_CFG(219, GPIO) +#define GPIO219_I2C2_SDA PIN_CFG(219, ALT_A) +#define GPIO219_LCD_D3 PIN_CFG(219, ALT_B) + +#define GPIO220_GPIO PIN_CFG(220, GPIO) +#define GPIO220_MSP2_TCK PIN_CFG(220, ALT_A) +#define GPIO220_LCD_D2 PIN_CFG(220, ALT_B) + +#define GPIO221_GPIO PIN_CFG(221, GPIO) +#define GPIO221_MSP2_TFS PIN_CFG(221, ALT_A) +#define GPIO221_LCD_D1 PIN_CFG(221, ALT_B) + +#define GPIO222_GPIO PIN_CFG(222, GPIO) +#define GPIO222_MSP2_TXD PIN_CFG(222, ALT_A) +#define GPIO222_LCD_D0 PIN_CFG(222, ALT_B) + +#define GPIO223_GPIO PIN_CFG(223, GPIO) +#define GPIO223_MSP2_RXD PIN_CFG(223, ALT_A) +#define GPIO223_LCD_CLK PIN_CFG(223, ALT_B) + +#define GPIO224_GPIO PIN_CFG(224, GPIO) +#define GPIO224_PRCMU_PWRCTRL0 PIN_CFG(224, ALT_A) +#define GPIO224_LCD_VSI1 PIN_CFG(224, ALT_B) + +#define GPIO225_GPIO PIN_CFG(225, GPIO) +#define GPIO225_PRCMU_PWRCTRL1 PIN_CFG(225, ALT_A) +#define GPIO225_IRDA_RXD PIN_CFG(225, ALT_B) + +#define GPIO226_GPIO PIN_CFG(226, GPIO) +#define GPIO226_PRCMU_PWRCTRL2 PIN_CFG(226, ALT_A) +#define GPIO226_IRRC_DAT PIN_CFG(226, ALT_B) + +#define GPIO227_GPIO PIN_CFG(227, GPIO) +#define GPIO227_IRRC_DAT PIN_CFG(227, ALT_A) +#define GPIO227_IRDA_TXD PIN_CFG(227, ALT_B) + +#endif diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h index 9055d5d3233c..66f8761cc823 100644 --- a/arch/arm/mach-ux500/pins-db8500.h +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -96,57 +96,57 @@ #define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) #define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) +#define GPIO18_MC0_CMDDIR PIN_CFG_PULL(18, ALT_A, UP) #define GPIO18_U2_RXD PIN_CFG(18, ALT_B) #define GPIO18_MS_IEP PIN_CFG(18, ALT_C) #define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) +#define GPIO19_MC0_DAT0DIR PIN_CFG_PULL(19, ALT_A, UP) #define GPIO19_U2_TXD PIN_CFG(19, ALT_B) #define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) #define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) +#define GPIO20_MC0_DAT2DIR PIN_CFG_PULL(20, ALT_A, UP) #define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) #define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) #define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) +#define GPIO21_MC0_DAT31DIR PIN_CFG_PULL(21, ALT_A, UP) #define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) #define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) #define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) +#define GPIO22_MC0_FBCLK PIN_CFG_PULL(22, ALT_A, UP) #define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) #define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) #define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) +#define GPIO23_MC0_CLK PIN_CFG_PULL(23, ALT_A, UP) #define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) #define GPIO23_MS_CLK PIN_CFG(23, ALT_C) #define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) +#define GPIO24_MC0_CMD PIN_CFG_PULL(24, ALT_A, UP) #define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) #define GPIO24_MS_BS PIN_CFG(24, ALT_C) #define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) +#define GPIO25_MC0_DAT0 PIN_CFG_PULL(25, ALT_A, UP) #define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) #define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) #define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) +#define GPIO26_MC0_DAT1 PIN_CFG_PULL(26, ALT_A, UP) #define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) #define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) #define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) +#define GPIO27_MC0_DAT2 PIN_CFG_PULL(27, ALT_A, UP) #define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) #define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) #define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) +#define GPIO28_MC0_DAT3 PIN_CFG_PULL(28, ALT_A, UP) #define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) #define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) @@ -357,48 +357,48 @@ #define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) #define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) +#define GPIO128_MC2_CLK PIN_CFG_PULL(128, ALT_A, UP) #define GPIO128_SM_CKO PIN_CFG(128, ALT_B) #define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) +#define GPIO129_MC2_CMD PIN_CFG_PULL(129, ALT_A, UP) #define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) #define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) +#define GPIO130_MC2_FBCLK PIN_CFG_PULL(130, ALT_A, UP) #define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) #define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) #define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) +#define GPIO131_MC2_DAT0 PIN_CFG_PULL(131, ALT_A, UP) #define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) #define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) +#define GPIO132_MC2_DAT1 PIN_CFG_PULL(132, ALT_A, UP) #define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) #define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) +#define GPIO133_MC2_DAT2 PIN_CFG_PULL(133, ALT_A, UP) #define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) #define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) +#define GPIO134_MC2_DAT3 PIN_CFG_PULL(134, ALT_A, UP) #define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) #define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) +#define GPIO135_MC2_DAT4 PIN_CFG_PULL(135, ALT_A, UP) #define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) #define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) +#define GPIO136_MC2_DAT5 PIN_CFG_PULL(136, ALT_A, UP) #define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) #define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) +#define GPIO137_MC2_DAT6 PIN_CFG_PULL(137, ALT_A, UP) #define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) #define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) +#define GPIO138_MC2_DAT7 PIN_CFG_PULL(138, ALT_A, UP) #define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) #define GPIO139_GPIO PIN_CFG(139, GPIO) @@ -569,39 +569,39 @@ #define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) #define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) +#define GPIO197_MC4_DAT3 PIN_CFG_PULL(197, ALT_A, UP) #define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) +#define GPIO198_MC4_DAT2 PIN_CFG_PULL(198, ALT_A, UP) #define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) +#define GPIO199_MC4_DAT1 PIN_CFG_PULL(199, ALT_A, UP) #define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) +#define GPIO200_MC4_DAT0 PIN_CFG_PULL(200, ALT_A, UP) #define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) +#define GPIO201_MC4_CMD PIN_CFG_PULL(201, ALT_A, UP) #define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) +#define GPIO202_MC4_FBCLK PIN_CFG_PULL(202, ALT_A, UP) #define GPIO202_PWL PIN_CFG(202, ALT_B) #define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) #define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) +#define GPIO203_MC4_CLK PIN_CFG_PULL(203, ALT_A, UP) #define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) +#define GPIO204_MC4_DAT7 PIN_CFG_PULL(204, ALT_A, UP) #define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) +#define GPIO205_MC4_DAT6 PIN_CFG_PULL(205, ALT_A, UP) #define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) +#define GPIO206_MC4_DAT5 PIN_CFG_PULL(206, ALT_A, UP) #define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) +#define GPIO207_MC4_DAT4 PIN_CFG_PULL(207, ALT_A, UP) #define GPIO208_GPIO PIN_CFG(208, GPIO) #define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 438ef16aec90..9e4c678de785 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -78,6 +78,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1); + smp_cross_call(cpumask_of(cpu)); + timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { if (pen_release == -1) diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c new file mode 100644 index 000000000000..293274d1342a --- /dev/null +++ b/arch/arm/mach-ux500/prcmu.c @@ -0,0 +1,231 @@ +/* + * Copyright (C) ST Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> + * + * U8500 PRCMU driver. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/mutex.h> +#include <linux/completion.h> +#include <linux/jiffies.h> +#include <linux/bitops.h> +#include <linux/interrupt.h> + +#include <mach/hardware.h> +#include <mach/prcmu-regs.h> + +#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE) + +#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44) +#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4) + +#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) +#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) +#define REQ_MB5_I2C_REG (REQ_MB5 + 2) +#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) + +#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) +#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) + +#define I2C_WRITE(slave) ((slave) << 1) +#define I2C_READ(slave) (((slave) << 1) | BIT(0)) +#define I2C_STOP_EN BIT(3) + +enum ack_mb5_status { + I2C_WR_OK = 0x01, + I2C_RD_OK = 0x02, +}; + +#define MBOX_BIT BIT +#define NUM_MBOX 8 + +static struct { + struct mutex lock; + struct completion work; + bool failed; + struct { + u8 status; + u8 value; + } ack; +} mb5_transfer; + +/** + * prcmu_abb_read() - Read register value(s) from the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The read out value(s). + * @size: The number of registers to read. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_read timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); + if (!r) + *value = mb5_transfer.ack.value; + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_read); + +/** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + writeb(*value, REQ_MB5_I2C_VAL); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_write timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_write); + +static void read_mailbox_0(void) +{ + writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_1(void) +{ + writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_2(void) +{ + writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_3(void) +{ + writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_4(void) +{ + writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_5(void) +{ + mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); + mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); + complete(&mb5_transfer.work); + writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_6(void) +{ + writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_7(void) +{ + writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); +} + +static void (* const read_mailbox[NUM_MBOX])(void) = { + read_mailbox_0, + read_mailbox_1, + read_mailbox_2, + read_mailbox_3, + read_mailbox_4, + read_mailbox_5, + read_mailbox_6, + read_mailbox_7 +}; + +static irqreturn_t prcmu_irq_handler(int irq, void *data) +{ + u32 bits; + u8 n; + + bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); + if (unlikely(!bits)) + return IRQ_NONE; + + for (n = 0; bits; n++) { + if (bits & MBOX_BIT(n)) { + bits -= MBOX_BIT(n); + read_mailbox[n](); + } + } + return IRQ_HANDLED; +} + +static int __init prcmu_init(void) +{ + mutex_init(&mb5_transfer.lock); + init_completion(&mb5_transfer.work); + + /* Clean up the mailbox interrupts after pre-kernel code. */ + writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); + + return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL); +} + +arch_initcall(prcmu_init); diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h new file mode 100644 index 000000000000..cb2110c32858 --- /dev/null +++ b/arch/arm/mach-ux500/ste-dma40-db5500.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + * + * DB5500-SoC-specific configuration for DMA40 + */ + +#ifndef STE_DMA40_DB5500_H +#define STE_DMA40_DB5500_H + +#define DB5500_DMA_NR_DEV 64 + +enum dma_src_dev_type { + DB5500_DMA_DEV0_SPI0_RX = 0, + DB5500_DMA_DEV1_SPI1_RX = 1, + DB5500_DMA_DEV2_SPI2_RX = 2, + DB5500_DMA_DEV3_SPI3_RX = 3, + DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4, + DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5, + DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6, + DB5500_DMA_DEV7_IRDA_RFS = 7, + DB5500_DMA_DEV8_IRDA_FIFO_RX = 8, + DB5500_DMA_DEV9_MSP0_RX = 9, + DB5500_DMA_DEV10_MSP1_RX = 10, + DB5500_DMA_DEV11_MSP2_RX = 11, + DB5500_DMA_DEV12_UART0_RX = 12, + DB5500_DMA_DEV13_UART1_RX = 13, + DB5500_DMA_DEV14_UART2_RX = 14, + DB5500_DMA_DEV15_UART3_RX = 15, + DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16, + DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17, + DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18, + DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19, + DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20, + DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21, + DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22, + DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23, + DB5500_DMA_DEV24_SDMMC0_RX = 24, + DB5500_DMA_DEV25_SDMMC1_RX = 25, + DB5500_DMA_DEV26_SDMMC2_RX = 26, + DB5500_DMA_DEV27_SDMMC3_RX = 27, + DB5500_DMA_DEV28_SDMMC4_RX = 28, + /* 29 - 32 not used */ + DB5500_DMA_DEV33_SDMMC0_RX = 33, + DB5500_DMA_DEV34_SDMMC1_RX = 34, + DB5500_DMA_DEV35_SDMMC2_RX = 35, + DB5500_DMA_DEV36_SDMMC3_RX = 36, + DB5500_DMA_DEV37_SDMMC4_RX = 37, + DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38, + DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39, + DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40, + DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41, + DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42, + DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43, + DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44, + DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45, + /* 46 not used */ + DB5500_DMA_DEV47_MCDE_RX = 47, + DB5500_DMA_DEV48_CRYPTO1_RX = 48, + /* 49, 50 not used */ + DB5500_DMA_DEV49_I2C1_RX = 51, + DB5500_DMA_DEV50_I2C3_RX = 52, + DB5500_DMA_DEV51_I2C2_RX = 53, + /* 54 - 60 not used */ + DB5500_DMA_DEV61_CRYPTO0_RX = 61, + /* 62, 63 not used */ +}; + +enum dma_dest_dev_type { + DB5500_DMA_DEV0_SPI0_TX = 0, + DB5500_DMA_DEV1_SPI1_TX = 1, + DB5500_DMA_DEV2_SPI2_TX = 2, + DB5500_DMA_DEV3_SPI3_TX = 3, + DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4, + DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5, + DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6, + DB5500_DMA_DEV7_IRRC_TX = 7, + DB5500_DMA_DEV8_IRDA_FIFO_TX = 8, + DB5500_DMA_DEV9_MSP0_TX = 9, + DB5500_DMA_DEV10_MSP1_TX = 10, + DB5500_DMA_DEV11_MSP2_TX = 11, + DB5500_DMA_DEV12_UART0_TX = 12, + DB5500_DMA_DEV13_UART1_TX = 13, + DB5500_DMA_DEV14_UART2_TX = 14, + DB5500_DMA_DEV15_UART3_TX = 15, + DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16, + DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17, + DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18, + DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19, + DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20, + DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21, + DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22, + DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23, + DB5500_DMA_DEV24_SDMMC0_TX = 24, + DB5500_DMA_DEV25_SDMMC1_TX = 25, + DB5500_DMA_DEV26_SDMMC2_TX = 26, + DB5500_DMA_DEV27_SDMMC3_TX = 27, + DB5500_DMA_DEV28_SDMMC4_TX = 28, + /* 29 - 31 not used */ + DB5500_DMA_DEV32_FSMC_TX = 32, + DB5500_DMA_DEV33_SDMMC0_TX = 33, + DB5500_DMA_DEV34_SDMMC1_TX = 34, + DB5500_DMA_DEV35_SDMMC2_TX = 35, + DB5500_DMA_DEV36_SDMMC3_TX = 36, + DB5500_DMA_DEV37_SDMMC4_TX = 37, + DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38, + DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39, + DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40, + DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41, + DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42, + DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43, + DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44, + DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45, + /* 46 not used */ + DB5500_DMA_DEV47_STM_TX = 47, + DB5500_DMA_DEV48_CRYPTO1_TX = 48, + DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49, + DB5500_DMA_DEV50_HASH1_TX = 50, + DB5500_DMA_DEV51_I2C1_TX = 51, + DB5500_DMA_DEV52_I2C3_TX = 52, + DB5500_DMA_DEV53_I2C2_TX = 53, + /* 54, 55 not used */ + DB5500_DMA_MEMCPY_TX_1 = 56, + DB5500_DMA_MEMCPY_TX_2 = 57, + DB5500_DMA_MEMCPY_TX_3 = 58, + DB5500_DMA_MEMCPY_TX_4 = 59, + DB5500_DMA_MEMCPY_TX_5 = 60, + DB5500_DMA_DEV61_CRYPTO0_TX = 61, + DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62, + DB5500_DMA_DEV63_HASH0_TX = 63, +}; + +#endif diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h index 9d9d3797b3b0..a616419bea76 100644 --- a/arch/arm/mach-ux500/ste-dma40-db8500.h +++ b/arch/arm/mach-ux500/ste-dma40-db8500.h @@ -10,145 +10,135 @@ #ifndef STE_DMA40_DB8500_H #define STE_DMA40_DB8500_H -#define STEDMA40_NR_DEV 64 +#define DB8500_DMA_NR_DEV 64 enum dma_src_dev_type { - STEDMA40_DEV_SPI0_RX = 0, - STEDMA40_DEV_SD_MMC0_RX = 1, - STEDMA40_DEV_SD_MMC1_RX = 2, - STEDMA40_DEV_SD_MMC2_RX = 3, - STEDMA40_DEV_I2C1_RX = 4, - STEDMA40_DEV_I2C3_RX = 5, - STEDMA40_DEV_I2C2_RX = 6, - STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */ - STEDMA40_DEV_SSP0_RX = 8, - STEDMA40_DEV_SSP1_RX = 9, - STEDMA40_DEV_MCDE_RX = 10, - STEDMA40_DEV_UART2_RX = 11, - STEDMA40_DEV_UART1_RX = 12, - STEDMA40_DEV_UART0_RX = 13, - STEDMA40_DEV_MSP2_RX = 14, - STEDMA40_DEV_I2C0_RX = 15, - STEDMA40_DEV_USB_OTG_IEP_8 = 16, - STEDMA40_DEV_USB_OTG_IEP_1_9 = 17, - STEDMA40_DEV_USB_OTG_IEP_2_10 = 18, - STEDMA40_DEV_USB_OTG_IEP_3_11 = 19, - STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20, - STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21, - STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22, - STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23, - STEDMA40_DEV_SRC_SXA0_RX_TX = 24, - STEDMA40_DEV_SRC_SXA1_RX_TX = 25, - STEDMA40_DEV_SRC_SXA2_RX_TX = 26, - STEDMA40_DEV_SRC_SXA3_RX_TX = 27, - STEDMA40_DEV_SD_MM2_RX = 28, - STEDMA40_DEV_SD_MM0_RX = 29, - STEDMA40_DEV_MSP1_RX = 30, - /* - * This channel is either SlimBus or MSP, - * never both at the same time. - */ - STEDMA40_SLIM0_CH0_RX = 31, - STEDMA40_DEV_MSP0_RX = 31, - STEDMA40_DEV_SD_MM1_RX = 32, - STEDMA40_DEV_SPI2_RX = 33, - STEDMA40_DEV_I2C3_RX2 = 34, - STEDMA40_DEV_SPI1_RX = 35, - STEDMA40_DEV_USB_OTG_IEP_4_12 = 36, - STEDMA40_DEV_USB_OTG_IEP_5_13 = 37, - STEDMA40_DEV_USB_OTG_IEP_6_14 = 38, - STEDMA40_DEV_USB_OTG_IEP_7_15 = 39, - STEDMA40_DEV_SPI3_RX = 40, - STEDMA40_DEV_SD_MM3_RX = 41, - STEDMA40_DEV_SD_MM4_RX = 42, - STEDMA40_DEV_SD_MM5_RX = 43, - STEDMA40_DEV_SRC_SXA4_RX_TX = 44, - STEDMA40_DEV_SRC_SXA5_RX_TX = 45, - STEDMA40_DEV_SRC_SXA6_RX_TX = 46, - STEDMA40_DEV_SRC_SXA7_RX_TX = 47, - STEDMA40_DEV_CAC1_RX = 48, - /* RX channels 49 and 50 are unused */ - STEDMA40_DEV_MSHC_RX = 51, - STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52, - STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53, - STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54, - STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55, - /* RX channels 56 thru 60 are unused */ - STEDMA40_DEV_CAC0_RX = 61, - /* RX channels 62 and 63 are unused */ + DB8500_DMA_DEV0_SPI0_RX = 0, + DB8500_DMA_DEV1_SD_MMC0_RX = 1, + DB8500_DMA_DEV2_SD_MMC1_RX = 2, + DB8500_DMA_DEV3_SD_MMC2_RX = 3, + DB8500_DMA_DEV4_I2C1_RX = 4, + DB8500_DMA_DEV5_I2C3_RX = 5, + DB8500_DMA_DEV6_I2C2_RX = 6, + DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */ + DB8500_DMA_DEV8_SSP0_RX = 8, + DB8500_DMA_DEV9_SSP1_RX = 9, + DB8500_DMA_DEV10_MCDE_RX = 10, + DB8500_DMA_DEV11_UART2_RX = 11, + DB8500_DMA_DEV12_UART1_RX = 12, + DB8500_DMA_DEV13_UART0_RX = 13, + DB8500_DMA_DEV14_MSP2_RX = 14, + DB8500_DMA_DEV15_I2C0_RX = 15, + DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16, + DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17, + DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18, + DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19, + DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20, + DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21, + DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22, + DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23, + DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24, + DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25, + DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26, + DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27, + DB8500_DMA_DEV28_SD_MM2_RX = 28, + DB8500_DMA_DEV29_SD_MM0_RX = 29, + DB8500_DMA_DEV30_MSP1_RX = 30, + /* On DB8500v2, MSP3 RX replaces MSP1 RX */ + DB8500_DMA_DEV30_MSP3_RX = 30, + DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31, + DB8500_DMA_DEV32_SD_MM1_RX = 32, + DB8500_DMA_DEV33_SPI2_RX = 33, + DB8500_DMA_DEV34_I2C3_RX2 = 34, + DB8500_DMA_DEV35_SPI1_RX = 35, + DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36, + DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37, + DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38, + DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39, + DB8500_DMA_DEV40_SPI3_RX = 40, + DB8500_DMA_DEV41_SD_MM3_RX = 41, + DB8500_DMA_DEV42_SD_MM4_RX = 42, + DB8500_DMA_DEV43_SD_MM5_RX = 43, + DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44, + DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45, + DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46, + DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47, + DB8500_DMA_DEV48_CAC1_RX = 48, + /* 49, 50 and 51 are not used */ + DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52, + DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53, + DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54, + DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55, + /* 56, 57, 58, 59 and 60 are not used */ + DB8500_DMA_DEV61_CAC0_RX = 61, + /* 62 and 63 are not used */ }; enum dma_dest_dev_type { - STEDMA40_DEV_SPI0_TX = 0, - STEDMA40_DEV_SD_MMC0_TX = 1, - STEDMA40_DEV_SD_MMC1_TX = 2, - STEDMA40_DEV_SD_MMC2_TX = 3, - STEDMA40_DEV_I2C1_TX = 4, - STEDMA40_DEV_I2C3_TX = 5, - STEDMA40_DEV_I2C2_TX = 6, - STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */ - STEDMA40_DEV_SSP0_TX = 8, - STEDMA40_DEV_SSP1_TX = 9, - /* TX channel 10 is unused */ - STEDMA40_DEV_UART2_TX = 11, - STEDMA40_DEV_UART1_TX = 12, - STEDMA40_DEV_UART0_TX= 13, - STEDMA40_DEV_MSP2_TX = 14, - STEDMA40_DEV_I2C0_TX = 15, - STEDMA40_DEV_USB_OTG_OEP_8 = 16, - STEDMA40_DEV_USB_OTG_OEP_1_9 = 17, - STEDMA40_DEV_USB_OTG_OEP_2_10= 18, - STEDMA40_DEV_USB_OTG_OEP_3_11 = 19, - STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20, - STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21, - STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22, - STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23, - STEDMA40_DEV_DST_SXA0_RX_TX = 24, - STEDMA40_DEV_DST_SXA1_RX_TX = 25, - STEDMA40_DEV_DST_SXA2_RX_TX = 26, - STEDMA40_DEV_DST_SXA3_RX_TX = 27, - STEDMA40_DEV_SD_MM2_TX = 28, - STEDMA40_DEV_SD_MM0_TX = 29, - STEDMA40_DEV_MSP1_TX = 30, - /* - * This channel is either SlimBus or MSP, - * never both at the same time. - */ - STEDMA40_SLIM0_CH0_TX = 31, - STEDMA40_DEV_MSP0_TX = 31, - STEDMA40_DEV_SD_MM1_TX = 32, - STEDMA40_DEV_SPI2_TX = 33, - /* Secondary I2C3 channel */ - STEDMA40_DEV_I2C3_TX2 = 34, - STEDMA40_DEV_SPI1_TX = 35, - STEDMA40_DEV_USB_OTG_OEP_4_12 = 36, - STEDMA40_DEV_USB_OTG_OEP_5_13 = 37, - STEDMA40_DEV_USB_OTG_OEP_6_14 = 38, - STEDMA40_DEV_USB_OTG_OEP_7_15 = 39, - STEDMA40_DEV_SPI3_TX = 40, - STEDMA40_DEV_SD_MM3_TX = 41, - STEDMA40_DEV_SD_MM4_TX = 42, - STEDMA40_DEV_SD_MM5_TX = 43, - STEDMA40_DEV_DST_SXA4_RX_TX = 44, - STEDMA40_DEV_DST_SXA5_RX_TX = 45, - STEDMA40_DEV_DST_SXA6_RX_TX = 46, - STEDMA40_DEV_DST_SXA7_RX_TX = 47, - STEDMA40_DEV_CAC1_TX = 48, - STEDMA40_DEV_CAC1_TX_HAC1_TX = 49, - STEDMA40_DEV_HAC1_TX = 50, - STEDMA40_MEMCPY_TX_0 = 51, - STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52, - STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53, - STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54, - STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55, - STEDMA40_MEMCPY_TX_1 = 56, - STEDMA40_MEMCPY_TX_2 = 57, - STEDMA40_MEMCPY_TX_3 = 58, - STEDMA40_MEMCPY_TX_4 = 59, - STEDMA40_MEMCPY_TX_5 = 60, - STEDMA40_DEV_CAC0_TX = 61, - STEDMA40_DEV_CAC0_TX_HAC0_TX = 62, - STEDMA40_DEV_HAC0_TX = 63, + DB8500_DMA_DEV0_SPI0_TX = 0, + DB8500_DMA_DEV1_SD_MMC0_TX = 1, + DB8500_DMA_DEV2_SD_MMC1_TX = 2, + DB8500_DMA_DEV3_SD_MMC2_TX = 3, + DB8500_DMA_DEV4_I2C1_TX = 4, + DB8500_DMA_DEV5_I2C3_TX = 5, + DB8500_DMA_DEV6_I2C2_TX = 6, + DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */ + DB8500_DMA_DEV8_SSP0_TX = 8, + DB8500_DMA_DEV9_SSP1_TX = 9, + /* 10 is not used*/ + DB8500_DMA_DEV11_UART2_TX = 11, + DB8500_DMA_DEV12_UART1_TX = 12, + DB8500_DMA_DEV13_UART0_TX = 13, + DB8500_DMA_DEV14_MSP2_TX = 14, + DB8500_DMA_DEV15_I2C0_TX = 15, + DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16, + DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17, + DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18, + DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19, + DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20, + DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21, + DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22, + DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23, + DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24, + DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25, + DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26, + DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27, + DB8500_DMA_DEV28_SD_MM2_TX = 28, + DB8500_DMA_DEV29_SD_MM0_TX = 29, + DB8500_DMA_DEV30_MSP1_TX = 30, + DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31, + DB8500_DMA_DEV32_SD_MM1_TX = 32, + DB8500_DMA_DEV33_SPI2_TX = 33, + DB8500_DMA_DEV34_I2C3_TX2 = 34, + DB8500_DMA_DEV35_SPI1_TX = 35, + DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36, + DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37, + DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38, + DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39, + DB8500_DMA_DEV40_SPI3_TX = 40, + DB8500_DMA_DEV41_SD_MM3_TX = 41, + DB8500_DMA_DEV42_SD_MM4_TX = 42, + DB8500_DMA_DEV43_SD_MM5_TX = 43, + DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44, + DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45, + DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46, + DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47, + DB8500_DMA_DEV48_CAC1_TX = 48, + DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, + DB8500_DMA_DEV50_HAC1_TX = 50, + DB8500_DMA_MEMCPY_TX_0 = 51, + DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52, + DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53, + DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54, + DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55, + DB8500_DMA_MEMCPY_TX_1 = 56, + DB8500_DMA_MEMCPY_TX_2 = 57, + DB8500_DMA_MEMCPY_TX_3 = 58, + DB8500_DMA_MEMCPY_TX_4 = 59, + DB8500_DMA_MEMCPY_TX_5 = 60, + DB8500_DMA_DEV61_CAC0_TX = 61, + DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, + DB8500_DMA_DEV63_HAC0_TX = 63, }; #endif diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h index 427e3612db5d..ebd8a2543d3b 100644 --- a/arch/arm/mach-versatile/include/mach/vmalloc.h +++ b/arch/arm/mach-versatile/include/mach/vmalloc.h @@ -18,4 +18,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) +#define VMALLOC_END 0xd8000000 diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h index 72a9621ed087..5a6da4fd247e 100644 --- a/arch/arm/mach-vexpress/include/mach/smp.h +++ b/arch/arm/mach-vexpress/include/mach/smp.h @@ -2,14 +2,7 @@ #define __MACH_SMP_H #include <asm/hardware/gic.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) +#include <asm/smp_mpidr.h> /* * We use IRQ1 as the IPI diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 86aa689ef1aa..99fa688dfadd 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -21,18 +21,22 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 -#ifdef CONFIG_ARM_ERRATA_411920 /* - * Invalidate the entire I cache (this code is a workaround for the ARM1136 - * erratum 411920 - Invalidate Instruction Cache operation can fail. This - * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * v6_flush_icache_all() + * + * Flush the whole I-cache. * - * Registers: - * r0 - set to 0 - * r1 - corrupted + * ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail. + * This erratum is present in 1136, 1156 and 1176. It does not affect the + * MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted */ -ENTRY(v6_icache_inval_all) +ENTRY(v6_flush_icache_all) mov r0, #0 +#ifdef CONFIG_ARM_ERRATA_411920 mrs r1, cpsr cpsid ifa @ disable interrupts mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache @@ -43,8 +47,11 @@ ENTRY(v6_icache_inval_all) .rept 11 @ ARM Ltd recommends at least nop @ 11 NOPs .endr - mov pc, lr +#else + mcr p15, 0, r0, c7, c5, 0 @ invalidate I-cache #endif + mov pc, lr +ENDPROC(v6_flush_icache_all) /* * v6_flush_cache_all() @@ -60,7 +67,7 @@ ENTRY(v6_flush_kern_cache_all) #ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else - b v6_icache_inval_all + b v6_flush_icache_all #endif #else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate @@ -138,7 +145,7 @@ ENTRY(v6_coherent_user_range) #ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else - b v6_icache_inval_all + b v6_flush_icache_all #endif #else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB @@ -312,6 +319,7 @@ ENDPROC(v6_dma_unmap_area) .type v6_cache_fns, #object ENTRY(v6_cache_fns) + .long v6_flush_icache_all .long v6_flush_kern_cache_all .long v6_flush_user_cache_all .long v6_flush_user_cache_range diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 37c8157e116e..a3ebf7a4f49b 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -18,6 +18,21 @@ #include "proc-macros.S" /* + * v7_flush_icache_all() + * + * Flush the whole I-cache. + * + * Registers: + * r0 - set to 0 + */ +ENTRY(v7_flush_icache_all) + mov r0, #0 + ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate + mov pc, lr +ENDPROC(v7_flush_icache_all) + +/* * v7_flush_dcache_all() * * Flush the whole D-cache. @@ -91,11 +106,8 @@ ENTRY(v7_flush_kern_cache_all) THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) bl v7_flush_dcache_all mov r0, #0 -#ifdef CONFIG_SMP - mcr p15, 0, r0, c7, c1, 0 @ invalidate I-cache inner shareable -#else - mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate -#endif + ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) mov pc, lr @@ -171,11 +183,8 @@ ENTRY(v7_coherent_user_range) cmp r0, r1 blo 1b mov r0, #0 -#ifdef CONFIG_SMP - mcr p15, 0, r0, c7, c1, 6 @ invalidate BTB Inner Shareable -#else - mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB -#endif + ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB dsb isb mov pc, lr @@ -309,6 +318,7 @@ ENDPROC(v7_dma_unmap_area) .type v7_cache_fns, #object ENTRY(v7_cache_fns) + .long v7_flush_icache_all .long v7_flush_kern_cache_all .long v7_flush_user_cache_all .long v7_flush_user_cache_range diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 598c51ad5071..b8061519ce77 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -73,7 +73,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from, { void *kto = kmap_atomic(to, KM_USER1); - if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); spin_lock(&minicache_lock); diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index f55fa1044f72..bdba6c65c901 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -79,7 +79,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to, unsigned int offset = CACHE_COLOUR(vaddr); unsigned long kfrom, kto; - if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); /* FIXME: not highmem safe */ diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 9920c0ae2096..649bbcd325bf 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -95,7 +95,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from, { void *kto = kmap_atomic(to, KM_USER1); - if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); spin_lock(&minicache_lock); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4bc43e535d3b..e4dd0646e859 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -523,6 +523,12 @@ void ___dma_page_dev_to_cpu(struct page *page, unsigned long off, outer_inv_range(paddr, paddr + size); dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + + /* + * Mark the D-cache clean for this page to avoid extra flushing. + */ + if (dir != DMA_TO_DEVICE && off == 0 && size >= PAGE_SIZE) + set_bit(PG_dcache_clean, &page->flags); } EXPORT_SYMBOL(___dma_page_dev_to_cpu); diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 9b906dec1ca1..8440d952ba6d 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -28,6 +28,7 @@ static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE; +#if __LINUX_ARM_ARCH__ < 6 /* * We take the easy way out of this problem - we make the * PTE uncacheable. However, we leave the write buffer on. @@ -141,7 +142,7 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, * a page table, or changing an existing PTE. Basically, there are two * things that we need to take care of: * - * 1. If PG_dcache_dirty is set for the page, we need to ensure + * 1. If PG_dcache_clean is not set for the page, we need to ensure * that any cache entries for the kernels virtual memory * range are written back to the page. * 2. If we have multiple shared mappings of the same space in @@ -168,10 +169,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, return; mapping = page_mapping(page); -#ifndef CONFIG_SMP - if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) + if (!test_and_set_bit(PG_dcache_clean, &page->flags)) __flush_dcache_page(mapping, page); -#endif if (mapping) { if (cache_is_vivt()) make_coherent(mapping, vma, addr, ptep, pfn); @@ -179,6 +178,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, __flush_icache_all(); } } +#endif /* __LINUX_ARM_ARCH__ < 6 */ /* * Check whether the write buffer has physical address aliasing diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 23b0b03af5ea..1e21e125fe3a 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -581,6 +581,19 @@ static struct fsr_info ifsr_info[] = { { do_bad, SIGBUS, 0, "unknown 31" }, }; +void __init +hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), + int sig, int code, const char *name) +{ + if (nr < 0 || nr >= ARRAY_SIZE(ifsr_info)) + BUG(); + + ifsr_info[nr].fn = fn; + ifsr_info[nr].sig = sig; + ifsr_info[nr].code = code; + ifsr_info[nr].name = name; +} + asmlinkage void __exception do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) { diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index c6844cb9b508..391ffae75098 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -17,6 +17,7 @@ #include <asm/smp_plat.h> #include <asm/system.h> #include <asm/tlbflush.h> +#include <asm/smp_plat.h> #include "mm.h" @@ -39,6 +40,18 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) : "cc"); } +static void flush_icache_alias(unsigned long pfn, unsigned long vaddr, unsigned long len) +{ + unsigned long colour = CACHE_COLOUR(vaddr); + unsigned long offset = vaddr & (PAGE_SIZE - 1); + unsigned long to; + + set_pte_ext(TOP_PTE(ALIAS_FLUSH_START) + colour, pfn_pte(pfn, PAGE_KERNEL), 0); + to = ALIAS_FLUSH_START + (colour << PAGE_SHIFT) + offset; + flush_tlb_kernel_page(to); + flush_icache_range(to, to + len); +} + void flush_cache_mm(struct mm_struct *mm) { if (cache_is_vivt()) { @@ -89,16 +102,16 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged()) __flush_icache_all(); } + #else -#define flush_pfn_alias(pfn,vaddr) do { } while (0) +#define flush_pfn_alias(pfn,vaddr) do { } while (0) +#define flush_icache_alias(pfn,vaddr,len) do { } while (0) #endif -#ifdef CONFIG_SMP static void flush_ptrace_access_other(void *args) { __flush_icache_all(); } -#endif static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, @@ -118,15 +131,16 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, return; } - /* VIPT non-aliasing cache */ + /* VIPT non-aliasing D-cache */ if (vma->vm_flags & VM_EXEC) { unsigned long addr = (unsigned long)kaddr; - __cpuc_coherent_kern_range(addr, addr + len); -#ifdef CONFIG_SMP + if (icache_is_vipt_aliasing()) + flush_icache_alias(page_to_pfn(page), uaddr, len); + else + __cpuc_coherent_kern_range(addr, addr + len); if (cache_ops_need_broadcast()) smp_call_function(flush_ptrace_access_other, NULL, 1); -#endif } } @@ -215,6 +229,36 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p flush_dcache_mmap_unlock(mapping); } +#if __LINUX_ARM_ARCH__ >= 6 +void __sync_icache_dcache(pte_t pteval) +{ + unsigned long pfn; + struct page *page; + struct address_space *mapping; + + if (!pte_present_user(pteval)) + return; + if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) + /* only flush non-aliasing VIPT caches for exec mappings */ + return; + pfn = pte_pfn(pteval); + if (!pfn_valid(pfn)) + return; + + page = pfn_to_page(pfn); + if (cache_is_vipt_aliasing()) + mapping = page_mapping(page); + else + mapping = NULL; + + if (!test_and_set_bit(PG_dcache_clean, &page->flags)) + __flush_dcache_page(mapping, page); + /* pte_exec() already checked above for non-aliasing VIPT cache */ + if (cache_is_vipt_nonaliasing() || pte_exec(pteval)) + __flush_icache_all(); +} +#endif + /* * Ensure cache coherency between kernel mapping and userspace mapping * of this page. @@ -246,17 +290,16 @@ void flush_dcache_page(struct page *page) mapping = page_mapping(page); -#ifndef CONFIG_SMP - if (!PageHighMem(page) && mapping && !mapping_mapped(mapping)) - set_bit(PG_dcache_dirty, &page->flags); - else -#endif - { + if (!cache_ops_need_broadcast() && + mapping && !mapping_mapped(mapping)) + clear_bit(PG_dcache_clean, &page->flags); + else { __flush_dcache_page(mapping, page); if (mapping && cache_is_vivt()) __flush_dcache_aliases(mapping, page); else if (mapping) __flush_icache_all(); + set_bit(PG_dcache_clean, &page->flags); } } EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 7185b00650fe..36c4553ffcce 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -277,7 +277,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) /* Register the kernel text, kernel data and initrd with memblock. */ #ifdef CONFIG_XIP_KERNEL - memblock_reserve(__pa(_data), _end - _data); + memblock_reserve(__pa(_sdata), _end - _sdata); #else memblock_reserve(__pa(_stext), _end - _stext); #endif @@ -545,7 +545,7 @@ void __init mem_init(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_text, _etext), - MLK_ROUNDUP(_data, _edata)); + MLK_ROUNDUP(_sdata, _edata)); #undef MLK #undef MLM diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 4f5b39687df5..b0a98305055c 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -144,3 +144,25 @@ int valid_mmap_phys_addr_range(unsigned long pfn, size_t size) { return !(pfn + (size >> PAGE_SHIFT) > 0x00100000); } + +#ifdef CONFIG_STRICT_DEVMEM + +#include <linux/ioport.h> + +/* + * devmem_is_allowed() checks to see if /dev/mem access to a certain + * address is valid. The argument is a physical page number. + * We mimic x86 here by disallowing access to system RAM as well as + * device-exclusive MMIO regions. This effectively disable read()/write() + * on /dev/mem. + */ +int devmem_is_allowed(unsigned long pfn) +{ + if (iomem_is_exclusive(pfn << PAGE_SHIFT)) + return 0; + if (!page_is_ram(pfn)) + return 1; + return 0; +} + +#endif diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 6a3a2d0cd6db..c32f731d56d3 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -248,7 +248,7 @@ static struct mem_type mem_types[] = { }, [MT_MEMORY] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_USER | L_PTE_EXEC, + L_PTE_WRITE | L_PTE_EXEC, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, @@ -259,7 +259,7 @@ static struct mem_type mem_types[] = { }, [MT_MEMORY_NONCACHED] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE, + L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, @@ -310,9 +310,8 @@ static void __init build_mem_type_table(void) cachepolicy = CPOLICY_WRITEBACK; ecc_mask = 0; } -#ifdef CONFIG_SMP - cachepolicy = CPOLICY_WRITEALLOC; -#endif + if (is_smp()) + cachepolicy = CPOLICY_WRITEALLOC; /* * Strip out features not present on earlier architectures. @@ -406,13 +405,11 @@ static void __init build_mem_type_table(void) cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; -#ifndef CONFIG_SMP /* * Only use write-through for non-SMP systems */ - if (cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH) + if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH) vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte; -#endif /* * Enable CPU-specific coherency if supported. @@ -436,22 +433,23 @@ static void __init build_mem_type_table(void) mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; -#ifdef CONFIG_SMP - /* - * Mark memory with the "shared" attribute for SMP systems - */ - user_pgprot |= L_PTE_SHARED; - kern_pgprot |= L_PTE_SHARED; - vecs_pgprot |= L_PTE_SHARED; - mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; - mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; - mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; - mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; - mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED; -#endif + if (is_smp()) { + /* + * Mark memory with the "shared" attribute + * for SMP systems + */ + user_pgprot |= L_PTE_SHARED; + kern_pgprot |= L_PTE_SHARED; + vecs_pgprot |= L_PTE_SHARED; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; + mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED; + } } /* @@ -829,8 +827,7 @@ static void __init sanity_check_meminfo(void) * rather difficult. */ reason = "with VIPT aliasing cache"; -#ifdef CONFIG_SMP - } else if (tlb_ops_need_broadcast()) { + } else if (is_smp() && tlb_ops_need_broadcast()) { /* * kmap_high needs to occasionally flush TLB entries, * however, if the TLB entries need to be broadcast @@ -840,7 +837,6 @@ static void __init sanity_check_meminfo(void) * (must not be called with irqs off) */ reason = "without hardware TLB ops broadcasting"; -#endif } if (reason) { printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n", diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 203a4e944d9e..a6f5f8475b96 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -430,7 +430,7 @@ ENTRY(cpu_arm1020_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm1020_setup, #function __arm1020_setup: diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 1a511e765909..afc06b9c3133 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -412,7 +412,7 @@ ENTRY(cpu_arm1020e_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm1020e_setup, #function __arm1020e_setup: diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 1ffa4eb9c34f..8915e0ba3fe5 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -394,7 +394,7 @@ ENTRY(cpu_arm1022_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm1022_setup, #function __arm1022_setup: diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 5697c34b95b0..ff446c5d476f 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -384,7 +384,7 @@ ENTRY(cpu_arm1026_set_pte_ext) mov pc, lr - __INIT + __CPUINIT .type __arm1026_setup, #function __arm1026_setup: diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 64e0b327c7c5..6a7be1863edd 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -238,7 +238,7 @@ ENTRY(cpu_arm7_reset) mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc mov pc, r0 - __INIT + __CPUINIT .type __arm6_setup, #function __arm6_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 9d96824134fc..c285395f44b2 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -113,7 +113,7 @@ ENTRY(cpu_arm720_reset) mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 - __INIT + __CPUINIT .type __arm710_setup, #function __arm710_setup: diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 6c1a9ab059ae..38b27dcba727 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -55,7 +55,7 @@ ENTRY(cpu_arm740_reset) mcr p15, 0, ip, c1, c0, 0 @ ctrl register mov pc, r0 - __INIT + __CPUINIT .type __arm740_setup, #function __arm740_setup: diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 6a850dbba22e..0c9786de20af 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -46,7 +46,7 @@ ENTRY(cpu_arm7tdmi_proc_fin) ENTRY(cpu_arm7tdmi_reset) mov pc, r0 - __INIT + __CPUINIT .type __arm7tdmi_setup, #function __arm7tdmi_setup: diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 86f80aa56216..fecf570939f3 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -375,7 +375,7 @@ ENTRY(cpu_arm920_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __arm920_setup, #function __arm920_setup: diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index f76ce9b62883..e3cbf87c9480 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -379,7 +379,7 @@ ENTRY(cpu_arm922_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm922_setup, #function __arm922_setup: diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 657bd3f7c153..572424c867b5 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -428,7 +428,7 @@ ENTRY(cpu_arm925_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __INIT + __CPUINIT .type __arm925_setup, #function __arm925_setup: diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 73f1f3c68910..63d168b4ebe6 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -389,7 +389,7 @@ ENTRY(cpu_arm926_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __arm926_setup, #function __arm926_setup: diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index fffb061a45a5..f6a62822418e 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -264,7 +264,7 @@ ENTRY(arm940_cache_fns) .long arm940_dma_unmap_area .long arm940_dma_flush_range - __INIT + __CPUINIT .type __arm940_setup, #function __arm940_setup: diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 249a6053760a..ea2e7f2eb95b 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -317,7 +317,7 @@ ENTRY(cpu_arm946_dcache_clean_area) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr - __INIT + __CPUINIT .type __arm946_setup, #function __arm946_setup: diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index db475667fac2..db67e3134d7a 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -46,7 +46,7 @@ ENTRY(cpu_arm9tdmi_proc_fin) ENTRY(cpu_arm9tdmi_reset) mov pc, r0 - __INIT + __CPUINIT .type __arm9tdmi_setup, #function __arm9tdmi_setup: diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index 7803fdf70029..7c9ad621f0e6 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -134,7 +134,7 @@ ENTRY(cpu_fa526_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __fa526_setup, #function __fa526_setup: diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index b304d0104a4e..578da69200cf 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -494,7 +494,7 @@ ENTRY(cpu_feroceon_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __feroceon_setup, #function __feroceon_setup: diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 5f6892fcc167..4458ee6aa713 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -338,7 +338,7 @@ ENTRY(cpu_mohawk_set_pte_ext) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr - __INIT + __CPUINIT .type __mohawk_setup, #function __mohawk_setup: diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index a201eb04b5e1..5aa8d59c2e85 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -156,7 +156,7 @@ ENTRY(cpu_sa110_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __sa110_setup, #function __sa110_setup: diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 7ddc4805bf97..2ac4e6f10713 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -169,7 +169,7 @@ ENTRY(cpu_sa1100_set_pte_ext) #endif mov pc, lr - __INIT + __CPUINIT .type __sa1100_setup, #function __sa1100_setup: diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 22aac8515196..59a7e1ffe7bc 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -30,13 +30,10 @@ #define TTB_RGN_WT (2 << 3) #define TTB_RGN_WB (3 << 3) -#ifndef CONFIG_SMP -#define TTB_FLAGS TTB_RGN_WBWA -#define PMD_FLAGS PMD_SECT_WB -#else -#define TTB_FLAGS TTB_RGN_WBWA|TTB_S -#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S -#endif +#define TTB_FLAGS_UP TTB_RGN_WBWA +#define PMD_FLAGS_UP PMD_SECT_WB +#define TTB_FLAGS_SMP TTB_RGN_WBWA|TTB_S +#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S ENTRY(cpu_v6_proc_init) mov pc, lr @@ -97,7 +94,8 @@ ENTRY(cpu_v6_switch_mm) #ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id - orr r0, r0, #TTB_FLAGS + ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) + ALT_UP(orr r0, r0, #TTB_FLAGS_UP) mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -137,7 +135,7 @@ cpu_pj4_name: .align - __INIT + __CPUINIT /* * __v6_setup @@ -156,9 +154,11 @@ cpu_pj4_name: */ __v6_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode + ALT_SMP(mrc p15, 0, r0, c1, c0, 1) @ Enable SMP/nAMP mode + ALT_UP(nop) orr r0, r0, #0x20 - mcr p15, 0, r0, c1, c0, 1 + ALT_SMP(mcr p15, 0, r0, c1, c0, 1) + ALT_UP(nop) #endif mov r0, #0 @@ -169,7 +169,8 @@ __v6_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register - orr r4, r4, #TTB_FLAGS + ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) + ALT_UP(orr r4, r4, #TTB_FLAGS_UP) mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval @@ -192,6 +193,8 @@ __v6_setup: v6_crval: crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c + __INITDATA + .type v6_processor_functions, #object ENTRY(v6_processor_functions) .word v6_early_abort @@ -205,6 +208,8 @@ ENTRY(v6_processor_functions) .word cpu_v6_set_pte_ext .size v6_processor_functions, . - v6_processor_functions + .section ".rodata" + .type cpu_arch_name, #object cpu_arch_name: .asciz "armv6" @@ -225,10 +230,16 @@ cpu_elf_name: __v6_proc_info: .long 0x0007b000 .long 0x0007f000 - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ @@ -249,10 +260,16 @@ __v6_proc_info: __pj4_v6_proc_info: .long 0x560f5810 .long 0xff0ffff0 - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7563ff0141bd..c39dfbbbeb7e 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -30,15 +30,13 @@ #define TTB_IRGN_WT ((1 << 0) | (0 << 6)) #define TTB_IRGN_WB ((1 << 0) | (1 << 6)) -#ifndef CONFIG_SMP /* PTWs cacheable, inner WB not shareable, outer WB not shareable */ -#define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB -#define PMD_FLAGS PMD_SECT_WB -#else +#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB +#define PMD_FLAGS_UP PMD_SECT_WB + /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ -#define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA -#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S -#endif +#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA +#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S ENTRY(cpu_v7_proc_init) mov pc, lr @@ -105,7 +103,8 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id - orr r0, r0, #TTB_FLAGS + ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) + ALT_UP(orr r0, r0, #TTB_FLAGS_UP) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif @@ -169,7 +168,7 @@ cpu_v7_name: .ascii "ARMv7 Processor" .align - __INIT + __CPUINIT /* * __v7_setup @@ -188,7 +187,8 @@ cpu_v7_name: */ __v7_ca9mp_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 + ALT_SMP(mrc p15, 0, r0, c1, c0, 1) + ALT_UP(mov r0, #(1 << 6)) @ fake it for UP tst r0, #(1 << 6) @ SMP/nAMP mode enabled? orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting @@ -253,6 +253,14 @@ __v7_setup: orreq r10, r10, #1 << 22 @ set bit #22 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif +#ifdef CONFIG_ARM_ERRATA_743622 + teq r6, #0x20 @ present in r2p0 + teqne r6, #0x21 @ present in r2p1 + teqne r6, #0x22 @ present in r2p2 + mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register + orreq r10, r10, #1 << 6 @ set bit #6 + mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif 3: mov r10, #0 #ifdef HARVARD_CACHE @@ -262,7 +270,8 @@ __v7_setup: #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r10, c2, c0, 2 @ TTB control register - orr r4, r4, #TTB_FLAGS + ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) + ALT_UP(orr r4, r4, #TTB_FLAGS_UP) mcr p15, 0, r4, c2, c0, 1 @ load TTB1 mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register @@ -324,6 +333,8 @@ v7_crval: __v7_setup_stack: .space 4 * 11 @ 11 registers + __INITDATA + .type v7_processor_functions, #object ENTRY(v7_processor_functions) .word v7_early_abort @@ -337,6 +348,8 @@ ENTRY(v7_processor_functions) .word cpu_v7_set_pte_ext .size v7_processor_functions, . - v7_processor_functions + .section ".rodata" + .type cpu_arch_name, #object cpu_arch_name: .asciz "armv7" @@ -354,10 +367,16 @@ cpu_elf_name: __v7_ca9mp_proc_info: .long 0x410fc090 @ Required ID value .long 0xff0ffff0 @ Mask for ID - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ @@ -380,10 +399,16 @@ __v7_ca9mp_proc_info: __v7_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 361a51e49030..cad07e403044 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -404,7 +404,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .align - __INIT + __CPUINIT .type __xsc3_setup, #function __xsc3_setup: diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 14075979bcba..cb245edb2c2b 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -506,7 +506,7 @@ ENTRY(cpu_xscale_set_pte_ext) .align - __INIT + __CPUINIT .type __xscale_setup, #function __xscale_setup: diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index f3f288a9546d..53cd5b454673 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -13,6 +13,7 @@ */ #include <linux/init.h> #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/page.h> #include <asm/tlbflush.h> @@ -41,20 +42,15 @@ ENTRY(v7wbi_flush_user_tlb_range) orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT 1: -#ifdef CONFIG_SMP - mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) -#else - mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA -#endif + ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) + ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA + add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b mov ip, #0 -#ifdef CONFIG_SMP - mcr p15, 0, ip, c7, c1, 6 @ flush BTAC/BTB Inner Shareable -#else - mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB -#endif + ALT_SMP(mcr p15, 0, ip, c7, c1, 6) @ flush BTAC/BTB Inner Shareable + ALT_UP(mcr p15, 0, ip, c7, c5, 6) @ flush BTAC/BTB dsb mov pc, lr ENDPROC(v7wbi_flush_user_tlb_range) @@ -74,20 +70,14 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov r0, r0, lsl #PAGE_SHIFT mov r1, r1, lsl #PAGE_SHIFT 1: -#ifdef CONFIG_SMP - mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) -#else - mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA -#endif + ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) + ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b mov r2, #0 -#ifdef CONFIG_SMP - mcr p15, 0, r2, c7, c1, 6 @ flush BTAC/BTB Inner Shareable -#else - mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB -#endif + ALT_SMP(mcr p15, 0, r2, c7, c1, 6) @ flush BTAC/BTB Inner Shareable + ALT_UP(mcr p15, 0, r2, c7, c5, 6) @ flush BTAC/BTB dsb isb mov pc, lr @@ -99,5 +89,6 @@ ENDPROC(v7wbi_flush_kern_tlb_range) ENTRY(v7wbi_tlb_fns) .long v7wbi_flush_user_tlb_range .long v7wbi_flush_kern_tlb_range - .long v7wbi_tlb_flags + ALT_SMP(.long v7wbi_tlb_flags_smp) + ALT_UP(.long v7wbi_tlb_flags_up) .size v7wbi_tlb_fns, . - v7wbi_tlb_fns diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 0691176899ff..72e09eb642dd 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -102,6 +102,7 @@ static int op_create_counter(int cpu, int event) if (IS_ERR(pevent)) { ret = PTR_ERR(pevent); } else if (pevent->state != PERF_EVENT_STATE_ACTIVE) { + perf_event_release_kernel(pevent); pr_warning("oprofile: failed to enable event %d " "on CPU %d\n", event, cpu); ret = -EBUSY; @@ -365,6 +366,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ret = init_driverfs(); if (ret) { kfree(counter_config); + counter_config = NULL; return ret; } @@ -402,7 +404,6 @@ void oprofile_arch_exit(void) struct perf_event *event; if (*perf_events) { - exit_driverfs(); for_each_possible_cpu(cpu) { for (id = 0; id < perf_num_counters; ++id) { event = perf_events[cpu][id]; @@ -413,8 +414,10 @@ void oprofile_arch_exit(void) } } - if (counter_config) + if (counter_config) { kfree(counter_config); + exit_driverfs(); + } } #else int __init oprofile_arch_init(struct oprofile_operations *ops) diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 6785db4179b8..95f8d614d4fc 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -92,6 +92,18 @@ config MXC_DEBUG_BOARD data/address de-multiplexing and decode, signal level shift, interrupt control and various board functions. +config HAVE_EPIT + bool + +config MXC_USE_EPIT + bool "Use EPIT instead of GPT" + depends on HAVE_EPIT + help + Use EPIT as the system timer on systems that have it. Normally you + don't have a reason to do so as the EPIT has the same features and + uses the same clocks as the GPT. Anyway, on some systems the GPT + may be in use for other purposes. + config MXC_ULPI bool diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 78d405ed8616..bb3443f9751a 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o +obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index f9e7cdbd0005..62920490c0d6 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -186,7 +186,13 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port); static int mxc_audmux_v2_init(void) { int ret; - +#if defined(CONFIG_ARCH_MX5) + if (cpu_is_mx51()) { + audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR); + ret = 0; + return ret; + } +#endif #if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index 9ab784b776f9..d736c3d4e292 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -5,6 +5,9 @@ config IMX_HAVE_PLATFORM_FLEXCAN config IMX_HAVE_PLATFORM_IMX_I2C bool +config IMX_HAVE_PLATFORM_IMX_SSI + bool + config IMX_HAVE_PLATFORM_IMX_UART bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index 347da5161f7e..ac7738379374 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -1,8 +1,6 @@ -ifdef CONFIG_CAN_FLEXCAN -# the ifdef can be removed once the flexcan driver has been merged -obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o -endif +obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c index d0af9f7d8aed..ca988d40a3d7 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -6,24 +6,94 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_imx_i2c(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_I2C ## _hwid, \ + } + +#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst = + imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX1 */ + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = + imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { +#define imx25_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_imx_i2c_data_entry(0, 1), + imx25_imx_i2c_data_entry(1, 2), + imx25_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { +#define imx27_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_i2c_data_entry(0, 1), + imx27_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { +#define imx31_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_i2c_data_entry(0, 1), + imx31_imx_i2c_data_entry(1, 2), + imx31_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { +#define imx35_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K) + imx35_imx_i2c_data_entry(0, 1), + imx35_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { +#define imx51_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_i2c_data_entry(0, 1), + imx51_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, const struct imxi2c_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res), + return imx_add_platform_device("imx-i2c", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c new file mode 100644 index 000000000000..38a7a0b8f2f1 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_SSI ## _hwid, \ + .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \ + .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \ + .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \ + .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { +#define imx21_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_ssi_data_entry(0, 1), + imx21_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = { +#define imx25_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K) + imx25_imx_ssi_data_entry(0, 1), + imx25_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { +#define imx27_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_ssi_data_entry(0, 1), + imx27_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = { +#define imx31_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_ssi_data_entry(0, 1), + imx31_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = { +#define imx35_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K) + imx35_imx_ssi_data_entry(0, 1), + imx35_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = { +#define imx51_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_ssi_data_entry(0, 1), + imx51_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, +#define DMARES(_name) { \ + .name = #_name, \ + .start = data->dma ## _name, \ + .end = data->dma ## _name, \ + .flags = IORESOURCE_DMA, \ +} + DMARES(tx0), + DMARES(rx0), + DMARES(tx1), + DMARES(rx1), + }; + + return imx_add_platform_device("imx-ssi", data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index fa3dff1433e8..2039640adf27 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -6,55 +6,148 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_imx_uart_3irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irqrx, resource_size_t irqtx, - resource_size_t irqrts, +#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irqrx = soc ## _INT_UART ## _hwid ## RX, \ + .irqtx = soc ## _INT_UART ## _hwid ## TX, \ + .irqrts = soc ## _INT_UART ## _hwid ## RTS, \ + } + +#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_UART ## _hwid, \ + } + +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = { +#define imx1_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0) + imx1_imx_uart_data_entry(0, 1), + imx1_imx_uart_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX1 */ + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { +#define imx21_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_uart_data_entry(0, 1), + imx21_imx_uart_data_entry(1, 2), + imx21_imx_uart_data_entry(2, 3), + imx21_imx_uart_data_entry(3, 4), +}; +#endif + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = { +#define imx25_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_imx_uart_data_entry(0, 1), + imx25_imx_uart_data_entry(1, 2), + imx25_imx_uart_data_entry(2, 3), + imx25_imx_uart_data_entry(3, 4), + imx25_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { +#define imx27_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_uart_data_entry(0, 1), + imx27_imx_uart_data_entry(1, 2), + imx27_imx_uart_data_entry(2, 3), + imx27_imx_uart_data_entry(3, 4), + imx27_imx_uart_data_entry(4, 5), + imx27_imx_uart_data_entry(5, 6), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { +#define imx31_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_uart_data_entry(0, 1), + imx31_imx_uart_data_entry(1, 2), + imx31_imx_uart_data_entry(2, 3), + imx31_imx_uart_data_entry(3, 4), + imx31_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { +#define imx35_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K) + imx35_imx_uart_data_entry(0, 1), + imx35_imx_uart_data_entry(1, 2), + imx35_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = { +#define imx51_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_uart_data_entry(0, 1), + imx51_imx_uart_data_entry(1, 2), + imx51_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_uart_3irq( + const struct imx_imx_uart_3irq_data *data, const struct imxuart_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irqrx, - .end = irqrx, + .start = data->irqrx, + .end = data->irqrx, .flags = IORESOURCE_IRQ, }, { - .start = irqtx, - .end = irqtx, + .start = data->irqtx, + .end = data->irqtx, .flags = IORESOURCE_IRQ, }, { - .start = irqrts, - .end = irqrx, + .start = data->irqrts, + .end = data->irqrx, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + return imx_add_platform_device("imx-uart", data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata)); } -struct platform_device *__init imx_add_imx_uart_1irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), + return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c index 1c286418d123..3fdcc32e3d67 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c +++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c @@ -7,38 +7,77 @@ * Free Software Foundation. */ #include <asm/sizes.h> +#include <mach/hardware.h> #include <mach/devices-common.h> -static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata, - resource_size_t iosize) +#define imx_mxc_nand_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_NFC \ + } + +#define imx_mxc_nandv3_data_entry_single(soc, _size) \ + { \ + .id = -1, \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .axibase = soc ## _NFC_AXI_BASE_ADDR, \ + .irq = soc ## _INT_NFC \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX21, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX25, SZ_8K); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX27, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX31, SZ_4K); +#endif + +#ifdef CONFIG_ARCH_MX35 +const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX35, SZ_8K); +#endif + +#ifdef CONFIG_ARCH_MX51 +const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst = + imx_mxc_nandv3_data_entry_single(MX51, SZ_16K); +#endif + +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata) { - static int id = 0; - + /* AXI has to come first, that's how the mxc_nand driver expect it */ struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->axibase, + .end = data->axibase + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - - return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res), + return imx_add_platform_device("mxc_nand", data->id, + res + !data->axibase, + ARRAY_SIZE(res) - !data->axibase, pdata, sizeof(*pdata)); } - -struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata) -{ - return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K); -} - -struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata) -{ - return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K); -} diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index 2831a6d3eb4b..e48340ec331e 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -6,25 +6,96 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <asm/sizes.h> +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_spi_imx(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \ + { \ + .devid = _devid, \ + .id = _id, \ + .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_ ## type ## hwid, \ + } + +#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ + [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { +#define imx21_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K) + imx21_cspi_data_entry(0, 1), + imx21_cspi_data_entry(1, 2), +#endif + +#ifdef CONFIG_ARCH_MX25 +const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { +#define imx25_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K) + imx25_cspi_data_entry(0, 1), + imx25_cspi_data_entry(1, 2), + imx25_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { +#define imx27_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K) + imx27_cspi_data_entry(0, 1), + imx27_cspi_data_entry(1, 2), + imx27_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_spi_imx_data imx31_cspi_data[] __initconst = { +#define imx31_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K) + imx31_cspi_data_entry(0, 1), + imx31_cspi_data_entry(1, 2), + imx31_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { +#define imx35_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K) + imx35_cspi_data_entry(0, 1), + imx35_cspi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_spi_imx_data imx51_cspi_data __initconst = + imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K); + +const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { +#define imx51_ecspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K) + imx51_ecspi_data_entry(0, 1), + imx51_ecspi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + return imx_add_platform_device(data->devid, data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 35a064ff02ba..9915607683de 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -249,8 +249,8 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) #ifdef CONFIG_ARCH_MX51 if (cpu_is_mx51()) { void __iomem *usb_base; - u32 usbotg_base; - u32 usbother_base; + void __iomem *usbotg_base; + void __iomem *usbother_base; int ret = 0; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c new file mode 100644 index 000000000000..ee9582f4972e --- /dev/null +++ b/arch/arm/plat-mxc/epit.c @@ -0,0 +1,242 @@ +/* + * linux/arch/arm/plat-mxc/epit.c + * + * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define EPITCR 0x00 +#define EPITSR 0x04 +#define EPITLR 0x08 +#define EPITCMPR 0x0c +#define EPITCNR 0x10 + +#define EPITCR_EN (1 << 0) +#define EPITCR_ENMOD (1 << 1) +#define EPITCR_OCIEN (1 << 2) +#define EPITCR_RLD (1 << 3) +#define EPITCR_PRESC(x) (((x) & 0xfff) << 4) +#define EPITCR_SWR (1 << 16) +#define EPITCR_IOVW (1 << 17) +#define EPITCR_DBGEN (1 << 18) +#define EPITCR_WAITEN (1 << 19) +#define EPITCR_RES (1 << 20) +#define EPITCR_STOPEN (1 << 21) +#define EPITCR_OM_DISCON (0 << 22) +#define EPITCR_OM_TOGGLE (1 << 22) +#define EPITCR_OM_CLEAR (2 << 22) +#define EPITCR_OM_SET (3 << 22) +#define EPITCR_CLKSRC_OFF (0 << 24) +#define EPITCR_CLKSRC_PERIPHERAL (1 << 24) +#define EPITCR_CLKSRC_REF_HIGH (1 << 24) +#define EPITCR_CLKSRC_REF_LOW (3 << 24) + +#define EPITSR_OCIF (1 << 0) + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clk.h> + +#include <mach/hardware.h> +#include <asm/mach/time.h> +#include <mach/common.h> + +static struct clock_event_device clockevent_epit; +static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +static void __iomem *timer_base; + +static inline void epit_irq_disable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val &= ~EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static inline void epit_irq_enable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val |= EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static void epit_irq_acknowledge(void) +{ + __raw_writel(EPITSR_OCIF, timer_base + EPITSR); +} + +static cycle_t epit_read(struct clocksource *cs) +{ + return 0 - __raw_readl(timer_base + EPITCNR); +} + +static struct clocksource clocksource_epit = { + .name = "epit", + .rating = 200, + .read = epit_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init epit_clocksource_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + clocksource_epit.mult = clocksource_hz2mult(c, + clocksource_epit.shift); + clocksource_register(&clocksource_epit); + + return 0; +} + +/* clock event */ + +static int epit_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + EPITCNR); + + __raw_writel(tcmp - evt, timer_base + EPITCMPR); + + return 0; +} + +static void epit_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call epit_set_next_event() + */ + local_irq_save(flags); + + /* Disable interrupt in GPT module */ + epit_irq_disable(); + + if (mode != clockevent_mode) { + /* Set event time into far-far future */ + + /* Clear pending interrupt */ + epit_irq_acknowledge(); + } + + /* Remember timer mode */ + clockevent_mode = mode; + local_irq_restore(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_ERR "epit_set_mode: Periodic mode is not " + "supported for i.MX EPIT\n"); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* + * Do not put overhead of interrupt enable/disable into + * epit_set_next_event(), the core has about 4 minutes + * to call epit_set_next_event() or shutdown clock after + * mode switching + */ + local_irq_save(flags); + epit_irq_enable(); + local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t epit_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_epit; + + epit_irq_acknowledge(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction epit_timer_irq = { + .name = "i.MX EPIT Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = epit_timer_interrupt, +}; + +static struct clock_event_device clockevent_epit = { + .name = "epit", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = epit_set_mode, + .set_next_event = epit_set_next_event, + .rating = 200, +}; + +static int __init epit_clockevent_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + clockevent_epit.mult = div_sc(c, NSEC_PER_SEC, + clockevent_epit.shift); + clockevent_epit.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_epit); + clockevent_epit.min_delta_ns = + clockevent_delta2ns(0x800, &clockevent_epit); + + clockevent_epit.cpumask = cpumask_of(0); + + clockevents_register_device(&clockevent_epit); + + return 0; +} + +void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +{ + clk_enable(timer_clk); + + timer_base = base; + + /* + * Initialise to a known state (all timers off, and timing reset) + */ + __raw_writel(0x0, timer_base + EPITCR); + + __raw_writel(0xffffffff, timer_base + EPITLR); + __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, + timer_base + EPITCR); + + /* init and register the timer to the framework */ + epit_clocksource_init(timer_clk); + epit_clockevent_init(timer_clk); + + /* Make irqs happen */ + setup_irq(irq, &epit_timer_irq); +} diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 2941472582d2..7a1e1f89ff09 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -32,6 +32,7 @@ extern void mx31_init_irq(void); extern void mx35_init_irq(void); extern void mx51_init_irq(void); extern void mxc91231_init_irq(void); +extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index c5f68c587309..f87aa1ad6685 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -14,47 +14,86 @@ struct platform_device *imx_add_platform_device(const char *name, int id, const struct resource *res, unsigned int num_resources, const void *data, size_t size_data); -#if defined (CONFIG_CAN_FLEXCAN) || defined (CONFIG_CAN_FLEXCAN_MODULE) #include <linux/can/platform/flexcan.h> struct platform_device *__init imx_add_flexcan(int id, resource_size_t iobase, resource_size_t iosize, resource_size_t irq, const struct flexcan_platform_data *pdata); -#else -/* the ifdef can be removed once the flexcan driver has been merged */ -struct flexcan_platform_data; -static inline struct platform_device *__init imx_add_flexcan(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, - const struct flexcan_platform_data *pdata) -{ - return NULL; -} -#endif #include <mach/i2c.h> -struct platform_device *__init imx_add_imx_i2c(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +struct imx_imx_i2c_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, const struct imxi2c_platform_data *pdata); +#include <mach/ssi.h> +struct imx_imx_ssi_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; + resource_size_t dmatx0; + resource_size_t dmarx0; + resource_size_t dmatx1; + resource_size_t dmarx1; +}; +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata); + #include <mach/imx-uart.h> -struct platform_device *__init imx_add_imx_uart_3irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irqrx, resource_size_t irqtx, - resource_size_t irqrts, +struct imx_imx_uart_3irq_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irqrx; + resource_size_t irqtx; + resource_size_t irqrts; +}; +struct platform_device *__init imx_add_imx_uart_3irq( + const struct imx_imx_uart_3irq_data *data, const struct imxuart_platform_data *pdata); -struct platform_device *__init imx_add_imx_uart_1irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, + +struct imx_imx_uart_1irq_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata); #include <mach/mxc_nand.h> -struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata); -struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata); +struct imx_mxc_nand_data { + /* + * id is traditionally 0, but -1 is more appropriate. We use -1 for new + * machines but don't change existing devices as the nand device usually + * appears in the kernel command line to pass its partitioning. + */ + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t axibase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata); #include <mach/spi.h> -struct platform_device *__init imx_add_spi_imx(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +struct imx_spi_imx_data { + const char *devid; + int id; + resource_size_t iobase; + resource_size_t iosize; + int irq; +}; +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index 21bfa46785bb..633650d3f814 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -45,6 +45,15 @@ typedef enum iomux_config { PAD_CTL_PKE | PAD_CTL_HYS) #define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \ PAD_CTL_SRE_FAST) +#define MX51_ECSPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) + +#define MX51_PAD_CTRL_1 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS) +#define MX51_PAD_CTRL_2 (PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) +#define MX51_PAD_CTRL_4 (PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH) /* * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> @@ -106,14 +115,20 @@ typedef enum iomux_config { #define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0x0d4, 3, 0x0, 0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) #define MX51_PAD_EIM_EB3__GPIO_2_23 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB3__FEC_RDAT1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_OE__GPIO_2_24 IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CS0__GPIO_2_25 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CS1__GPIO_2_26 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CS2__GPIO_2_27 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS2__FEC_RDAT2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_CS3__GPIO_2_28 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS3__FEC_RDAT3 IOMUX_PAD(0x480, 0x0ec, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_CS4__GPIO_2_29 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_CS5__GPIO_2_30 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_DTACK__GPIO_2_31 IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_LBA__GPIO_3_1 IOMUX_PAD(0x494, 0x0FC, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CRE__GPIO_3_2 IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) @@ -126,18 +141,32 @@ typedef enum iomux_config { #define MX51_PAD_NANDF_RB0__GPIO_3_8 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__GPIO_3_9 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__GPIO_3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_NANDF_RB3__GPIO_3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__FEC_RXCLK IOMUX_PAD(0x504, 0x128, 1, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_NANDF_RB6__FEC_RDAT0 IOMUX_PAD(0x5DC, 0x134, 1, 0x0, 0, MX51_PAD_CTRL_4) +#define MX51_PAD_NANDF_RB7__FEC_TDAT0 IOMUX_PAD(0x5E0, 0x138, 1, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_GPIO_NAND__GPIO_3_12 IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS0__GPIO_3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS1__GPIO_3_17 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS2__GPIO_3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS3__GPIO_3_19 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13C, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS4__GPIO_3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS4__FEC_TDAT1 IOMUX_PAD(0x528, 0x140, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS5__GPIO_3_21 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS5__FEC_TDAT2 IOMUX_PAD(0x52C, 0x144, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS6__GPIO_3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS6__FEC_TDAT3 IOMUX_PAD(0x530, 0x148, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS7__GPIO_3_23 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_RDY_INT__GPIO_3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0, 0, MX51_PAD_CTRL_4) #define MX51_PAD_NANDF_D15__GPIO_3_25 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53C, 0x154, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_NANDF_D14__GPIO_3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_D13__GPIO_3_27 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_D12__GPIO_3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) @@ -185,15 +214,25 @@ typedef enum iomux_config { #define MX51_PAD_I2C1_CLK__HSI2C_CLK IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_I2C1_DAT__GPIO_4_17 IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_I2C1_DAT__HSI2C_DAT IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_TXD__GPIO_4_18 IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_RXD__GPIO_4_19 IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_CK__GPIO_4_20 IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_FS__GPIO_4_21 IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_MOSI__GPIO_4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_MISO__GPIO_4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_SS0__GPIO_4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_SS1__GPIO_4_25 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_RDY__GPIO_4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) #define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, 0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) @@ -236,14 +275,14 @@ typedef enum iomux_config { #define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) #define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) #define MX51_PAD_DI1_PIN11__GPIO_3_0 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index ed98b9c9f389..8bc59720b6e4 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -120,7 +120,7 @@ #define MX21_INT_GPT1 26 #define MX21_INT_WDOG 27 #define MX21_INT_PCMCIA 28 -#define MX21_INT_NANDFC 29 +#define MX21_INT_NFC 29 #define MX21_INT_BMI 30 #define MX21_INT_CSI 31 #define MX21_INT_DMACH0 32 diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 4a6f800990f8..153dd1b2a473 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -50,6 +50,8 @@ #define MX25_SSI1_BASE_ADDR 0x50034000 #define MX25_NFC_BASE_ADDR 0xbb000000 #define MX25_DRYICE_BASE_ADDR 0x53ffc000 +#define MX25_ESDHC1_BASE_ADDR 0x53fb4000 +#define MX25_ESDHC2_BASE_ADDR 0x53fb8000 #define MX25_LCDC_BASE_ADDR 0x53fbc000 #define MX25_KPP_BASE_ADDR 0x43fa8000 #define MX25_OTG_BASE_ADDR 0x53ff4000 @@ -59,6 +61,8 @@ #define MX25_INT_I2C1 3 #define MX25_INT_I2C2 4 #define MX25_INT_UART4 5 +#define MX25_INT_MMC_SDHC2 8 +#define MX25_INT_MMC_SDHC1 9 #define MX25_INT_I2C3 10 #define MX25_INT_SSI2 11 #define MX25_INT_SSI1 12 @@ -69,7 +73,7 @@ #define MX25_INT_KPP 24 #define MX25_INT_DRYICE 25 #define MX25_INT_UART2 32 -#define MX25_INT_NANDFC 33 +#define MX25_INT_NFC 33 #define MX25_INT_LCDC 39 #define MX25_INT_UART5 40 #define MX25_INT_CAN1 43 @@ -77,4 +81,13 @@ #define MX25_INT_UART1 45 #define MX25_INT_FEC 57 +#define MX25_DMA_REQ_SSI2_RX1 22 +#define MX25_DMA_REQ_SSI2_TX1 23 +#define MX25_DMA_REQ_SSI2_RX0 24 +#define MX25_DMA_REQ_SSI2_TX0 25 +#define MX25_DMA_REQ_SSI1_RX1 26 +#define MX25_DMA_REQ_SSI1_TX1 27 +#define MX25_DMA_REQ_SSI1_RX0 28 +#define MX25_DMA_REQ_SSI1_TX0 29 + #endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index a8ab2e02a8ca..2237ba2e5351 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -167,7 +167,7 @@ static inline void mx27_setup_weimcs(size_t cs, #define MX27_INT_GPT1 26 #define MX27_INT_WDOG 27 #define MX27_INT_PCMCIA 28 -#define MX27_INT_NANDFC 29 +#define MX27_INT_NFC 29 #define MX27_INT_ATA 30 #define MX27_INT_CSI 31 #define MX27_INT_DMACH0 32 diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index afee3ab9d62e..03e2afabc9fc 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -168,7 +168,7 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_POWER_FAIL 30 #define MX31_INT_CCM_DVFS 31 #define MX31_INT_UART2 32 -#define MX31_INT_NANDFC 33 +#define MX31_INT_NFC 33 #define MX31_INT_SDMA 34 #define MX31_INT_USB1 35 #define MX31_INT_USB2 36 @@ -197,6 +197,15 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_EXT_WDOG 62 #define MX31_INT_EXT_TV 63 +#define MX31_DMA_REQ_SSI2_RX1 22 +#define MX31_DMA_REQ_SSI2_TX1 23 +#define MX31_DMA_REQ_SSI2_RX0 24 +#define MX31_DMA_REQ_SSI2_TX0 25 +#define MX31_DMA_REQ_SSI1_RX1 26 +#define MX31_DMA_REQ_SSI1_TX1 27 +#define MX31_DMA_REQ_SSI1_RX0 28 +#define MX31_DMA_REQ_SSI1_TX0 29 + #define MX31_PROD_SIGNATURE 0x1 /* For MX31 */ /* silicon revisions specific to i.MX31 */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index af3038c12e39..9f0a1ee126ee 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -145,7 +145,7 @@ #define MX35_INT_GPT 29 #define MX35_INT_POWER_FAIL 30 #define MX35_INT_UART2 32 -#define MX35_INT_NANDFC 33 +#define MX35_INT_NFC 33 #define MX35_INT_SDMA 34 #define MX35_INT_USBHS 35 #define MX35_INT_USBOTG 37 @@ -173,6 +173,15 @@ #define MX35_INT_EXT_WDOG 62 #define MX35_INT_EXT_TV 63 +#define MX35_DMA_REQ_SSI2_RX1 22 +#define MX35_DMA_REQ_SSI2_TX1 23 +#define MX35_DMA_REQ_SSI2_RX0 24 +#define MX35_DMA_REQ_SSI2_TX0 25 +#define MX35_DMA_REQ_SSI1_RX1 26 +#define MX35_DMA_REQ_SSI1_TX1 27 +#define MX35_DMA_REQ_SSI1_RX0 28 +#define MX35_DMA_REQ_SSI1_TX0 29 + #define MX35_PROD_SIGNATURE 0x1 /* For MX31 */ /* silicon revisions specific to i.MX31 */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 5aad344d5651..c99eeab6fe09 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -1,5 +1,5 @@ -#ifndef __ASM_ARCH_MXC_MX51_H__ -#define __ASM_ARCH_MXC_MX51_H__ +#ifndef __MACH_MX51_H__ +#define __MACH_MX51_H__ /* * MX51 memory map: @@ -7,24 +7,23 @@ * * Virt Phys Size What * --------------------------------------------------------------------------- - * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM) + * fa3e0000 1ffe0000 128K IRAM (SCCv2 RAM) * 30000000 256M GPU * 40000000 512M IPU - * FA200000 60000000 1M DEBUG - * FB100000 70000000 1M SPBA 0 - * FB000000 73F00000 1M AIPS 1 - * FB200000 83F00000 1M AIPS 2 - * 8FFFC000 16K TZIC (interrupt controller) + * fa200000 60000000 1M DEBUG + * fb100000 70000000 1M SPBA 0 + * fb000000 73f00000 1M AIPS 1 + * fb200000 83f00000 1M AIPS 2 + * 8fffc000 16K TZIC (interrupt controller) * 90000000 256M CSD0 SDRAM/DDR - * A0000000 256M CSD1 SDRAM/DDR - * B0000000 128M CS0 Flash - * B8000000 128M CS1 Flash - * C0000000 128M CS2 Flash - * C8000000 64M CS3 Flash - * CC000000 32M CS4 SRAM - * CE000000 32M CS5 SRAM - * CFFF0000 64K NFC (NAND Flash AXI) - * + * a0000000 256M CSD1 SDRAM/DDR + * b0000000 128M CS0 Flash + * b8000000 128M CS1 Flash + * c0000000 128M CS2 Flash + * c8000000 64M CS3 Flash + * cc000000 32M CS4 SRAM + * ce000000 32M CS5 SRAM + * cfff0000 64K NFC (NAND Flash AXI) */ /* @@ -36,65 +35,151 @@ /* * IRAM */ -#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ -#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000 +#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */ +#define MX51_IRAM_BASE_ADDR_VIRT 0xfa3e0000 #define MX51_IRAM_PARTITIONS 16 -#define MX51_IRAM_PARTITIONS_TO1 12 #define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */ +#define MX51_GPU_BASE_ADDR 0x20000000 +#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 +#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 + +#define MX51_DEBUG_BASE_ADDR 0x60000000 +#define MX51_DEBUG_BASE_ADDR_VIRT 0xfa200000 +#define MX51_DEBUG_SIZE SZ_1M + +#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000) +#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x02000) +#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x03000) +#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x04000) +#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x05000) +#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x06000) +#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x07000) +#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x08000) + /* - * NFC + * SPBA global module enabled #0 */ -#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ -#define MX51_NFC_AXI_SIZE SZ_64K +#define MX51_SPBA0_BASE_ADDR 0x70000000 +#define MX51_SPBA0_BASE_ADDR_VIRT 0xfb100000 +#define MX51_SPBA0_SIZE SZ_1M + +#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000) +#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000) +#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000) +#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000) +#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000) +#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000) +#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000) +#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000) +#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000) +#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000) +#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000) +#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000) /* - * Graphics Memory of GPU + * AIPS 1 */ -#define MX51_GPU_BASE_ADDR 0x20000000 -#define MX51_GPU2D_BASE_ADDR 0xD0000000 +#define MX51_AIPS1_BASE_ADDR 0x73f00000 +#define MX51_AIPS1_BASE_ADDR_VIRT 0xfb000000 +#define MX51_AIPS1_SIZE SZ_1M + +#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000) +#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000) +#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000) +#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000) +#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000) +#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000) +#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000) +#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000) +#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000) +#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000) +#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000) +#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000) +#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000) +#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000) +#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000) +#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000) +#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000) +#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000) +#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000) +#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000) -#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000 -#define MX51_TZIC_BASE_ADDR 0xE0000000 +/* + * AIPS 2 + */ +#define MX51_AIPS2_BASE_ADDR 0x83f00000 +#define MX51_AIPS2_BASE_ADDR_VIRT 0xfb200000 +#define MX51_AIPS2_SIZE SZ_1M -#define MX51_DEBUG_BASE_ADDR 0x60000000 -#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 -#define MX51_DEBUG_SIZE SZ_1M -#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000) -#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000) -#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000) -#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000) -#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000) -#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000) -#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000) -#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000) +#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000) +#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000) +#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000) +#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000) +#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000) +#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000) +#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000) +#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000) +#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000) +#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000) +#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000) +#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000) +#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000) +#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000) +#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000) +#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000) +#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000) +#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000) +#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000) +#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000) +#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000) +#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000) +#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000) +#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00) +#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000) +#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000) +#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000) +#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000) +#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000) +#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000) +#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000) +#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000) + +#define MX51_CSD0_BASE_ADDR 0x90000000 +#define MX51_CSD1_BASE_ADDR 0xa0000000 +#define MX51_CS0_BASE_ADDR 0xb0000000 +#define MX51_CS1_BASE_ADDR 0xb8000000 +#define MX51_CS2_BASE_ADDR 0xc0000000 +#define MX51_CS3_BASE_ADDR 0xc8000000 +#define MX51_CS4_BASE_ADDR 0xcc000000 +#define MX51_CS5_BASE_ADDR 0xce000000 /* - * SPBA global module enabled #0 + * NFC */ -#define MX51_SPBA0_BASE_ADDR 0x70000000 -#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000 -#define MX51_SPBA0_SIZE SZ_1M +#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */ +#define MX51_NFC_AXI_SIZE SZ_64K + +#define MX51_GPU2D_BASE_ADDR 0xd0000000 +#define MX51_TZIC_BASE_ADDR 0xe0000000 -#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000) -#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000) -#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000) -#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000) -#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000) -#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000) -#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000) -#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000) -#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000) -#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000) -#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000) -#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000) +#define MX51_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX51_IRAM) ?: \ + IMX_IO_ADDRESS(x, MX51_DEBUG) ?: \ + IMX_IO_ADDRESS(x, MX51_SPBA0) ?: \ + IMX_IO_ADDRESS(x, MX51_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX51_AIPS2)) + +/* This is currently used in <mach/debug-macro.S>, but should go away */ +#define MX51_AIPS1_IO_ADDRESS(x) \ + (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) /* * defines for SPBA modules */ #define MX51_SPBA_SDHC1 0x04 #define MX51_SPBA_SDHC2 0x08 -#define MX51_SPBA_UART3 0x0C +#define MX51_SPBA_UART3 0x0c #define MX51_SPBA_CSPI1 0x10 #define MX51_SPBA_SSI2 0x14 #define MX51_SPBA_SDHC3 0x20 @@ -103,35 +188,7 @@ #define MX51_SPBA_ATA 0x30 #define MX51_SPBA_SLIM 0x34 #define MX51_SPBA_HSI2C 0x38 -#define MX51_SPBA_CTRL 0x3C - -/* - * AIPS 1 - */ -#define MX51_AIPS1_BASE_ADDR 0x73F00000 -#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000 -#define MX51_AIPS1_SIZE SZ_1M - -#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000) -#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000) -#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000) -#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000) -#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000) -#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000) -#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000) -#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000) -#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000) -#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000) -#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000) -#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000) -#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000) -#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000) -#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000) -#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000) -#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000) -#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000) -#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000) -#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000) +#define MX51_SPBA_CTRL 0x3c /* * Defines for modules using static and dynamic DMA channels @@ -164,282 +221,186 @@ #define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL #define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL -/* - * AIPS 2 - */ -#define MX51_AIPS2_BASE_ADDR 0x83F00000 -#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000 -#define MX51_AIPS2_SIZE SZ_1M - -#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000) -#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000) -#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000) -#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000) -#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000) -#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000) -#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000) -#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000) -#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000) -#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000) -#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000) -#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000) -#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000) -#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000) -#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000) -#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000) -#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000) -#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000) -#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000) -#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000) -#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000) -#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000) -#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000) -#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00) -#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000) -#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000) -#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000) -#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000) -#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000) -#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000) -#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000) -#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000) - -/* - * Memory regions and CS - */ -#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 -#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 -#define MX51_CSD0_BASE_ADDR 0x90000000 -#define MX51_CSD1_BASE_ADDR 0xA0000000 -#define MX51_CS0_BASE_ADDR 0xB0000000 -#define MX51_CS1_BASE_ADDR 0xB8000000 -#define MX51_CS2_BASE_ADDR 0xC0000000 -#define MX51_CS3_BASE_ADDR 0xC8000000 -#define MX51_CS4_BASE_ADDR 0xCC000000 -#define MX51_CS5_BASE_ADDR 0xCE000000 - -/* Does given address belongs to the specified memory region? */ -#define ADDRESS_IN_REGION(addr, start, size) \ - (((addr) >= (start)) && ((addr) < (start)+(size))) - -/* Does given address belongs to the specified named `module'? */ -#define MX51_IS_MODULE(addr, module) \ - ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \ - MX51_ ## module ## _SIZE) -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ - -#define MX51_IO_ADDRESS(x) \ - (void __iomem *) \ - (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ -#define MX51_IRAM_IO_ADDRESS(x) \ - (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) - -#define MX51_DEBUG_IO_ADDRESS(x) \ - (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) - -#define MX51_SPBA0_IO_ADDRESS(x) \ - (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT) - -#define MX51_AIPS1_IO_ADDRESS(x) \ - (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) - -#define MX51_AIPS2_IO_ADDRESS(x) \ - (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) - #define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 /* * DMA request assignments */ -#define MX51_DMA_REQ_SSI3_TX1 47 -#define MX51_DMA_REQ_SSI3_RX1 46 -#define MX51_DMA_REQ_SPDIF 45 -#define MX51_DMA_REQ_UART3_TX 44 -#define MX51_DMA_REQ_UART3_RX 43 -#define MX51_DMA_REQ_SLIM_B_TX 42 -#define MX51_DMA_REQ_SDHC4 41 -#define MX51_DMA_REQ_SDHC3 40 -#define MX51_DMA_REQ_CSPI_TX 39 -#define MX51_DMA_REQ_CSPI_RX 38 -#define MX51_DMA_REQ_SSI3_TX2 37 -#define MX51_DMA_REQ_IPU 36 -#define MX51_DMA_REQ_SSI3_RX2 35 -#define MX51_DMA_REQ_EPIT2 34 -#define MX51_DMA_REQ_CTI2_1 33 -#define MX51_DMA_REQ_EMI_WR 32 -#define MX51_DMA_REQ_CTI2_0 31 -#define MX51_DMA_REQ_EMI_RD 30 -#define MX51_DMA_REQ_SSI1_TX1 29 -#define MX51_DMA_REQ_SSI1_RX1 28 -#define MX51_DMA_REQ_SSI1_TX2 27 -#define MX51_DMA_REQ_SSI1_RX2 26 -#define MX51_DMA_REQ_SSI2_TX1 25 -#define MX51_DMA_REQ_SSI2_RX1 24 -#define MX51_DMA_REQ_SSI2_TX2 23 -#define MX51_DMA_REQ_SSI2_RX2 22 -#define MX51_DMA_REQ_SDHC2 21 -#define MX51_DMA_REQ_SDHC1 20 -#define MX51_DMA_REQ_UART1_TX 19 -#define MX51_DMA_REQ_UART1_RX 18 -#define MX51_DMA_REQ_UART2_TX 17 -#define MX51_DMA_REQ_UART2_RX 16 -#define MX51_DMA_REQ_GPU 15 -#define MX51_DMA_REQ_EXTREQ1 14 -#define MX51_DMA_REQ_FIRI_TX 13 -#define MX51_DMA_REQ_FIRI_RX 12 -#define MX51_DMA_REQ_HS_I2C_RX 11 -#define MX51_DMA_REQ_HS_I2C_TX 10 -#define MX51_DMA_REQ_CSPI2_TX 9 -#define MX51_DMA_REQ_CSPI2_RX 8 -#define MX51_DMA_REQ_CSPI1_TX 7 -#define MX51_DMA_REQ_CSPI1_RX 6 -#define MX51_DMA_REQ_SLIM_B 5 -#define MX51_DMA_REQ_ATA_TX_END 4 -#define MX51_DMA_REQ_ATA_TX 3 -#define MX51_DMA_REQ_ATA_RX 2 -#define MX51_DMA_REQ_GPC 1 -#define MX51_DMA_REQ_VPU 0 +#define MX51_DMA_REQ_VPU 0 +#define MX51_DMA_REQ_GPC 1 +#define MX51_DMA_REQ_ATA_RX 2 +#define MX51_DMA_REQ_ATA_TX 3 +#define MX51_DMA_REQ_ATA_TX_END 4 +#define MX51_DMA_REQ_SLIM_B 5 +#define MX51_DMA_REQ_CSPI1_RX 6 +#define MX51_DMA_REQ_CSPI1_TX 7 +#define MX51_DMA_REQ_CSPI2_RX 8 +#define MX51_DMA_REQ_CSPI2_TX 9 +#define MX51_DMA_REQ_HS_I2C_TX 10 +#define MX51_DMA_REQ_HS_I2C_RX 11 +#define MX51_DMA_REQ_FIRI_RX 12 +#define MX51_DMA_REQ_FIRI_TX 13 +#define MX51_DMA_REQ_EXTREQ1 14 +#define MX51_DMA_REQ_GPU 15 +#define MX51_DMA_REQ_UART2_RX 16 +#define MX51_DMA_REQ_UART2_TX 17 +#define MX51_DMA_REQ_UART1_RX 18 +#define MX51_DMA_REQ_UART1_TX 19 +#define MX51_DMA_REQ_SDHC1 20 +#define MX51_DMA_REQ_SDHC2 21 +#define MX51_DMA_REQ_SSI2_RX1 22 +#define MX51_DMA_REQ_SSI2_TX1 23 +#define MX51_DMA_REQ_SSI2_RX0 24 +#define MX51_DMA_REQ_SSI2_TX0 25 +#define MX51_DMA_REQ_SSI1_RX1 26 +#define MX51_DMA_REQ_SSI1_TX1 27 +#define MX51_DMA_REQ_SSI1_RX0 28 +#define MX51_DMA_REQ_SSI1_TX0 29 +#define MX51_DMA_REQ_EMI_RD 30 +#define MX51_DMA_REQ_CTI2_0 31 +#define MX51_DMA_REQ_EMI_WR 32 +#define MX51_DMA_REQ_CTI2_1 33 +#define MX51_DMA_REQ_EPIT2 34 +#define MX51_DMA_REQ_SSI3_RX2 35 +#define MX51_DMA_REQ_IPU 36 +#define MX51_DMA_REQ_SSI3_TX2 37 +#define MX51_DMA_REQ_CSPI_RX 38 +#define MX51_DMA_REQ_CSPI_TX 39 +#define MX51_DMA_REQ_SDHC3 40 +#define MX51_DMA_REQ_SDHC4 41 +#define MX51_DMA_REQ_SLIM_B_TX 42 +#define MX51_DMA_REQ_UART3_RX 43 +#define MX51_DMA_REQ_UART3_TX 44 +#define MX51_DMA_REQ_SPDIF 45 +#define MX51_DMA_REQ_SSI3_RX1 46 +#define MX51_DMA_REQ_SSI3_TX1 47 /* * Interrupt numbers */ -#define MX51_MXC_INT_BASE 0 -#define MX51_MXC_INT_RESV0 0 -#define MX51_MXC_INT_MMC_SDHC1 1 -#define MX51_MXC_INT_MMC_SDHC2 2 -#define MX51_MXC_INT_MMC_SDHC3 3 -#define MX51_MXC_INT_MMC_SDHC4 4 -#define MX51_MXC_INT_RESV5 5 -#define MX51_MXC_INT_SDMA 6 -#define MX51_MXC_INT_IOMUX 7 -#define MX51_MXC_INT_NFC 8 -#define MX51_MXC_INT_VPU 9 -#define MX51_MXC_INT_IPU_ERR 10 -#define MX51_MXC_INT_IPU_SYN 11 -#define MX51_MXC_INT_GPU 12 -#define MX51_MXC_INT_RESV13 13 -#define MX51_MXC_INT_USB_H1 14 -#define MX51_MXC_INT_EMI 15 -#define MX51_MXC_INT_USB_H2 16 -#define MX51_MXC_INT_USB_H3 17 -#define MX51_MXC_INT_USB_OTG 18 -#define MX51_MXC_INT_SAHARA_H0 19 -#define MX51_MXC_INT_SAHARA_H1 20 -#define MX51_MXC_INT_SCC_SMN 21 -#define MX51_MXC_INT_SCC_STZ 22 -#define MX51_MXC_INT_SCC_SCM 23 -#define MX51_MXC_INT_SRTC_NTZ 24 -#define MX51_MXC_INT_SRTC_TZ 25 -#define MX51_MXC_INT_RTIC 26 -#define MX51_MXC_INT_CSU 27 -#define MX51_MXC_INT_SLIM_B 28 -#define MX51_MXC_INT_SSI1 29 -#define MX51_MXC_INT_SSI2 30 -#define MX51_MXC_INT_UART1 31 -#define MX51_MXC_INT_UART2 32 -#define MX51_MXC_INT_UART3 33 -#define MX51_MXC_INT_RESV34 34 -#define MX51_MXC_INT_RESV35 35 -#define MX51_MXC_INT_CSPI1 36 -#define MX51_MXC_INT_CSPI2 37 -#define MX51_MXC_INT_CSPI 38 -#define MX51_MXC_INT_GPT 39 -#define MX51_MXC_INT_EPIT1 40 -#define MX51_MXC_INT_EPIT2 41 -#define MX51_MXC_INT_GPIO1_INT7 42 -#define MX51_MXC_INT_GPIO1_INT6 43 -#define MX51_MXC_INT_GPIO1_INT5 44 -#define MX51_MXC_INT_GPIO1_INT4 45 -#define MX51_MXC_INT_GPIO1_INT3 46 -#define MX51_MXC_INT_GPIO1_INT2 47 -#define MX51_MXC_INT_GPIO1_INT1 48 -#define MX51_MXC_INT_GPIO1_INT0 49 -#define MX51_MXC_INT_GPIO1_LOW 50 -#define MX51_MXC_INT_GPIO1_HIGH 51 -#define MX51_MXC_INT_GPIO2_LOW 52 -#define MX51_MXC_INT_GPIO2_HIGH 53 -#define MX51_MXC_INT_GPIO3_LOW 54 -#define MX51_MXC_INT_GPIO3_HIGH 55 -#define MX51_MXC_INT_GPIO4_LOW 56 -#define MX51_MXC_INT_GPIO4_HIGH 57 -#define MX51_MXC_INT_WDOG1 58 -#define MX51_MXC_INT_WDOG2 59 -#define MX51_MXC_INT_KPP 60 -#define MX51_MXC_INT_PWM1 61 -#define MX51_MXC_INT_I2C1 62 -#define MX51_MXC_INT_I2C2 63 -#define MX51_MXC_INT_HS_I2C 64 -#define MX51_MXC_INT_RESV65 65 -#define MX51_MXC_INT_RESV66 66 -#define MX51_MXC_INT_SIM_IPB 67 -#define MX51_MXC_INT_SIM_DAT 68 -#define MX51_MXC_INT_IIM 69 -#define MX51_MXC_INT_ATA 70 -#define MX51_MXC_INT_CCM1 71 -#define MX51_MXC_INT_CCM2 72 -#define MX51_MXC_INT_GPC1 73 -#define MX51_MXC_INT_GPC2 74 -#define MX51_MXC_INT_SRC 75 -#define MX51_MXC_INT_NM 76 -#define MX51_MXC_INT_PMU 77 -#define MX51_MXC_INT_CTI_IRQ 78 -#define MX51_MXC_INT_CTI1_TG0 79 -#define MX51_MXC_INT_CTI1_TG1 80 -#define MX51_MXC_INT_MCG_ERR 81 -#define MX51_MXC_INT_MCG_TMR 82 -#define MX51_MXC_INT_MCG_FUNC 83 -#define MX51_MXC_INT_GPU2_IRQ 84 -#define MX51_MXC_INT_GPU2_BUSY 85 -#define MX51_MXC_INT_RESV86 86 -#define MX51_MXC_INT_FEC 87 -#define MX51_MXC_INT_OWIRE 88 -#define MX51_MXC_INT_CTI1_TG2 89 -#define MX51_MXC_INT_SJC 90 -#define MX51_MXC_INT_SPDIF 91 -#define MX51_MXC_INT_TVE 92 -#define MX51_MXC_INT_FIRI 93 -#define MX51_MXC_INT_PWM2 94 -#define MX51_MXC_INT_SLIM_EXP 95 -#define MX51_MXC_INT_SSI3 96 -#define MX51_MXC_INT_EMI_BOOT 97 -#define MX51_MXC_INT_CTI1_TG3 98 -#define MX51_MXC_INT_SMC_RX 99 -#define MX51_MXC_INT_VPU_IDLE 100 -#define MX51_MXC_INT_EMI_NFC 101 -#define MX51_MXC_INT_GPU_IDLE 102 +#define MX51_MXC_INT_BASE 0 +#define MX51_MXC_INT_RESV0 0 +#define MX51_MXC_INT_MMC_SDHC1 1 +#define MX51_MXC_INT_MMC_SDHC2 2 +#define MX51_MXC_INT_MMC_SDHC3 3 +#define MX51_MXC_INT_MMC_SDHC4 4 +#define MX51_MXC_INT_RESV5 5 +#define MX51_MXC_INT_SDMA 6 +#define MX51_MXC_INT_IOMUX 7 +#define MX51_INT_NFC 8 +#define MX51_MXC_INT_VPU 9 +#define MX51_MXC_INT_IPU_ERR 10 +#define MX51_MXC_INT_IPU_SYN 11 +#define MX51_MXC_INT_GPU 12 +#define MX51_MXC_INT_RESV13 13 +#define MX51_MXC_INT_USB_H1 14 +#define MX51_MXC_INT_EMI 15 +#define MX51_MXC_INT_USB_H2 16 +#define MX51_MXC_INT_USB_H3 17 +#define MX51_MXC_INT_USB_OTG 18 +#define MX51_MXC_INT_SAHARA_H0 19 +#define MX51_MXC_INT_SAHARA_H1 20 +#define MX51_MXC_INT_SCC_SMN 21 +#define MX51_MXC_INT_SCC_STZ 22 +#define MX51_MXC_INT_SCC_SCM 23 +#define MX51_MXC_INT_SRTC_NTZ 24 +#define MX51_MXC_INT_SRTC_TZ 25 +#define MX51_MXC_INT_RTIC 26 +#define MX51_MXC_INT_CSU 27 +#define MX51_MXC_INT_SLIM_B 28 +#define MX51_INT_SSI1 29 +#define MX51_INT_SSI2 30 +#define MX51_INT_UART1 31 +#define MX51_INT_UART2 32 +#define MX51_INT_UART3 33 +#define MX51_MXC_INT_RESV34 34 +#define MX51_MXC_INT_RESV35 35 +#define MX51_INT_ECSPI1 36 +#define MX51_INT_ECSPI2 37 +#define MX51_INT_CSPI 38 +#define MX51_MXC_INT_GPT 39 +#define MX51_MXC_INT_EPIT1 40 +#define MX51_MXC_INT_EPIT2 41 +#define MX51_MXC_INT_GPIO1_INT7 42 +#define MX51_MXC_INT_GPIO1_INT6 43 +#define MX51_MXC_INT_GPIO1_INT5 44 +#define MX51_MXC_INT_GPIO1_INT4 45 +#define MX51_MXC_INT_GPIO1_INT3 46 +#define MX51_MXC_INT_GPIO1_INT2 47 +#define MX51_MXC_INT_GPIO1_INT1 48 +#define MX51_MXC_INT_GPIO1_INT0 49 +#define MX51_MXC_INT_GPIO1_LOW 50 +#define MX51_MXC_INT_GPIO1_HIGH 51 +#define MX51_MXC_INT_GPIO2_LOW 52 +#define MX51_MXC_INT_GPIO2_HIGH 53 +#define MX51_MXC_INT_GPIO3_LOW 54 +#define MX51_MXC_INT_GPIO3_HIGH 55 +#define MX51_MXC_INT_GPIO4_LOW 56 +#define MX51_MXC_INT_GPIO4_HIGH 57 +#define MX51_MXC_INT_WDOG1 58 +#define MX51_MXC_INT_WDOG2 59 +#define MX51_MXC_INT_KPP 60 +#define MX51_MXC_INT_PWM1 61 +#define MX51_INT_I2C1 62 +#define MX51_INT_I2C2 63 +#define MX51_MXC_INT_HS_I2C 64 +#define MX51_MXC_INT_RESV65 65 +#define MX51_MXC_INT_RESV66 66 +#define MX51_MXC_INT_SIM_IPB 67 +#define MX51_MXC_INT_SIM_DAT 68 +#define MX51_MXC_INT_IIM 69 +#define MX51_MXC_INT_ATA 70 +#define MX51_MXC_INT_CCM1 71 +#define MX51_MXC_INT_CCM2 72 +#define MX51_MXC_INT_GPC1 73 +#define MX51_MXC_INT_GPC2 74 +#define MX51_MXC_INT_SRC 75 +#define MX51_MXC_INT_NM 76 +#define MX51_MXC_INT_PMU 77 +#define MX51_MXC_INT_CTI_IRQ 78 +#define MX51_MXC_INT_CTI1_TG0 79 +#define MX51_MXC_INT_CTI1_TG1 80 +#define MX51_MXC_INT_MCG_ERR 81 +#define MX51_MXC_INT_MCG_TMR 82 +#define MX51_MXC_INT_MCG_FUNC 83 +#define MX51_MXC_INT_GPU2_IRQ 84 +#define MX51_MXC_INT_GPU2_BUSY 85 +#define MX51_MXC_INT_RESV86 86 +#define MX51_MXC_INT_FEC 87 +#define MX51_MXC_INT_OWIRE 88 +#define MX51_MXC_INT_CTI1_TG2 89 +#define MX51_MXC_INT_SJC 90 +#define MX51_MXC_INT_SPDIF 91 +#define MX51_MXC_INT_TVE 92 +#define MX51_MXC_INT_FIRI 93 +#define MX51_MXC_INT_PWM2 94 +#define MX51_MXC_INT_SLIM_EXP 95 +#define MX51_MXC_INT_SSI3 96 +#define MX51_MXC_INT_EMI_BOOT 97 +#define MX51_MXC_INT_CTI1_TG3 98 +#define MX51_MXC_INT_SMC_RX 99 +#define MX51_MXC_INT_VPU_IDLE 100 +#define MX51_MXC_INT_EMI_NFC 101 +#define MX51_MXC_INT_GPU_IDLE 102 /* silicon revisions specific to i.MX51 */ -#define MX51_CHIP_REV_1_0 0x10 -#define MX51_CHIP_REV_1_1 0x11 -#define MX51_CHIP_REV_1_2 0x12 -#define MX51_CHIP_REV_1_3 0x13 -#define MX51_CHIP_REV_2_0 0x20 -#define MX51_CHIP_REV_2_1 0x21 -#define MX51_CHIP_REV_2_2 0x22 -#define MX51_CHIP_REV_2_3 0x23 -#define MX51_CHIP_REV_3_0 0x30 -#define MX51_CHIP_REV_3_1 0x31 -#define MX51_CHIP_REV_3_2 0x32 - -/* Mandatory defines used globally */ +#define MX51_CHIP_REV_1_0 0x10 +#define MX51_CHIP_REV_1_1 0x11 +#define MX51_CHIP_REV_1_2 0x12 +#define MX51_CHIP_REV_1_3 0x13 +#define MX51_CHIP_REV_2_0 0x20 +#define MX51_CHIP_REV_2_1 0x21 +#define MX51_CHIP_REV_2_2 0x22 +#define MX51_CHIP_REV_2_3 0x23 +#define MX51_CHIP_REV_3_0 0x30 +#define MX51_CHIP_REV_3_1 0x31 +#define MX51_CHIP_REV_3_2 0x32 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - extern int mx51_revision(void); #endif -#endif /* __ASM_ARCH_MXC_MX51_H__ */ +/* tape-out 1 defines */ +#define MX51_TZIC_BASE_ADDR_TO1 0x8fffc000 + +#endif /* ifndef __MACH_MX51_H__ */ diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 977c8f9a07a2..85e6fd212a41 100644 --- a/arch/arm/plat-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -102,6 +102,22 @@ static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); } +static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int val) +{ + if (val) + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS); + else + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC); +} + +static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int val) +{ + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); + __nmk_gpio_set_output(nmk_chip, offset, val); +} + static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, pin_cfg_t cfg) { @@ -118,20 +134,29 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, [3] /* illegal */ = "??" }; static const char *slpmnames[] = { - [NMK_GPIO_SLPM_INPUT] = "input", - [NMK_GPIO_SLPM_NOCHANGE] = "no-change", + [NMK_GPIO_SLPM_INPUT] = "input/wakeup", + [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", }; int pin = PIN_NUM(cfg); int pull = PIN_PULL(cfg); int af = PIN_ALT(cfg); int slpm = PIN_SLPM(cfg); + int output = PIN_DIR(cfg); + int val = PIN_VAL(cfg); - dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n", - pin, afnames[af], pullnames[pull], slpmnames[slpm]); + dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n", + pin, afnames[af], pullnames[pull], slpmnames[slpm], + output ? "output " : "input", + output ? (val ? "high" : "low") : ""); + + if (output) + __nmk_gpio_make_output(nmk_chip, offset, val); + else { + __nmk_gpio_make_input(nmk_chip, offset); + __nmk_gpio_set_pull(nmk_chip, offset, pull); + } - __nmk_gpio_make_input(nmk_chip, offset); - __nmk_gpio_set_pull(nmk_chip, offset, pull); __nmk_gpio_set_slpm(nmk_chip, offset, slpm); __nmk_gpio_set_mode(nmk_chip, offset, af); } @@ -200,6 +225,10 @@ EXPORT_SYMBOL(nmk_config_pins); * changed to an input (with pullup/down enabled) in sleep and deep sleep. If * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was * configured even when in sleep and deep sleep. + * + * On DB8500v2 onwards, this setting loses the previous meaning and instead + * indicates if wakeup detection is enabled on the pin. Note that + * enable_irq_wake() will automatically enable wakeup detection. */ int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) { @@ -367,7 +396,27 @@ static void nmk_gpio_irq_unmask(unsigned int irq) static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on) { - return nmk_gpio_irq_modify(irq, WAKE, on); + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + int gpio; + + gpio = NOMADIK_IRQ_TO_GPIO(irq); + nmk_chip = get_irq_chip_data(irq); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); +#ifdef CONFIG_ARCH_U8500 + if (cpu_is_u8500v2()) { + __nmk_gpio_set_slpm(nmk_chip, gpio, + on ? NMK_GPIO_SLPM_WAKEUP_ENABLE + : NMK_GPIO_SLPM_WAKEUP_DISABLE); + } +#endif + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; } static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) @@ -495,12 +544,8 @@ static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, { struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); - u32 bit = 1 << offset; - if (val) - writel(bit, nmk_chip->addr + NMK_GPIO_DATS); - else - writel(bit, nmk_chip->addr + NMK_GPIO_DATC); + __nmk_gpio_set_output(nmk_chip, offset, val); } static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, @@ -509,8 +554,7 @@ static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); - nmk_gpio_set_output(chip, offset, val); + __nmk_gpio_make_output(nmk_chip, offset, val); return 0; } @@ -534,7 +578,7 @@ static struct gpio_chip nmk_gpio_template = { .can_sleep = 0, }; -static int __init nmk_gpio_probe(struct platform_device *dev) +static int __devinit nmk_gpio_probe(struct platform_device *dev) { struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; struct nmk_gpio_chip *nmk_chip; diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h index aba355101f49..67b113d639d8 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -65,7 +65,9 @@ enum nmk_gpio_pull { /* Sleep mode */ enum nmk_gpio_slpm { NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, NMK_GPIO_SLPM_NOCHANGE, + NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, }; extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h index 7eed11c1038d..8c5ae3f2acf8 100644 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -19,12 +19,16 @@ * bit 9..10 - Alternate Function Selection * bit 11..12 - Pull up/down state * bit 13 - Sleep mode behaviour + * bit 14 - (sleep mode) Direction + * bit 15 - (sleep mode) Value (if output) * * to facilitate the definition, the following macros are provided * * PIN_CFG_DEFAULT - default config (0): * pull up/down = disabled - * sleep mode = input + * sleep mode = input/wakeup + * (sleep mode) direction = input + * (sleep mode) value = low * * PIN_CFG - default config with alternate function * PIN_CFG_PULL - default config with alternate function and pull up/down @@ -53,8 +57,36 @@ typedef unsigned long pin_cfg_t; #define PIN_SLPM_SHIFT 13 #define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) #define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) #define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) +/* These two replace the above in DB8500v2+ */ +#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) + +#define PIN_DIR_SHIFT 14 +#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) +#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) +#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) +#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) + +#define PIN_VAL_SHIFT 15 +#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) +#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) +#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) +#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) + +/* Shortcuts. Use these instead of separate DIR and VAL. */ +#define PIN_INPUT PIN_DIR_INPUT +#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) +#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) + +/* + * These are the same as the ones above, but should make more sense to the + * reader when seen along with a setting a pin to AF mode. + */ +#define PIN_SLPM_INPUT PIN_INPUT +#define PIN_SLPM_OUTPUT_LOW PIN_OUTPUT_LOW +#define PIN_SLPM_OUTPUT_HIGH PIN_OUTPUT_HIGH #define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index e39a417a368d..92c5bb7909f5 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -19,7 +19,7 @@ config ARCH_OMAP2PLUS bool "TI OMAP2/3/4" select COMMON_CLKDEV help - "Systems based on omap24xx, omap34xx or omap44xx" + "Systems based on OMAP2, OMAP3 or OMAP4" endchoice @@ -33,7 +33,7 @@ config OMAP_DEBUG_DEVICES config OMAP_DEBUG_LEDS bool depends on OMAP_DEBUG_DEVICES - default y if LEDS + default y if LEDS_CLASS config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 9405831b746a..a4a12859fdd5 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ - usb.o fb.o io.o + usb.o fb.o io.o counter_32k.o obj-m := obj-n := obj- := @@ -31,4 +31,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 7190cbd92620..fc62fb5fc20b 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -60,7 +60,7 @@ void clk_disable(struct clk *clk) spin_lock_irqsave(&clockfw_lock, flags); if (clk->usecount == 0) { - printk(KERN_ERR "Trying disable clock %s with 0 usecount\n", + pr_err("Trying disable clock %s with 0 usecount\n", clk->name); WARN_ON(1); goto out; @@ -397,6 +397,7 @@ static int __init clk_disable_unused(void) struct clk *ck; unsigned long flags; + pr_info("clock: disabling unused clocks to save power\n"); list_for_each_entry(ck, &clocks, node) { if (ck->ops == &clkops_null) continue; @@ -418,7 +419,7 @@ late_initcall(clk_disable_unused); int __init clk_init(struct clk_functions * custom_clocks) { if (!custom_clocks) { - printk(KERN_ERR "No custom clock functions registered\n"); + pr_err("No custom clock functions registered\n"); BUG(); } diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 3008e7104487..221a675ebbae 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -11,38 +11,15 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/delay.h> -#include <linux/console.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_8250.h> -#include <linux/serial_reg.h> -#include <linux/clk.h> #include <linux/io.h> #include <linux/omapfb.h> -#include <mach/hardware.h> -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/mach/map.h> -#include <asm/setup.h> - #include <plat/common.h> #include <plat/board.h> -#include <plat/control.h> -#include <plat/mux.h> -#include <plat/fpga.h> -#include <plat/serial.h> #include <plat/vram.h> -#include <plat/clock.h> - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -# include "../mach-omap2/sdrc.h" -#endif #define NO_LENGTH_CHECK 0xffffffff @@ -88,270 +65,3 @@ void __init omap_reserve(void) omapfb_reserve_sdram_memblock(); omap_vram_reserve_sdram_memblock(); } - -/* - * 32KHz clocksource ... always available, on pretty most chips except - * OMAP 730 and 1510. Other timers could be used as clocksources, with - * higher resolution in free-running counter modes (e.g. 12 MHz xtal), - * but systems won't necessarily want to spend resources that way. - */ - -#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410 - -#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) - -#include <linux/clocksource.h> - -/* - * offset_32k holds the init time counter value. It is then subtracted - * from every counter read to achieve a counter that counts time from the - * kernel boot (needed for sched_clock()). - */ -static u32 offset_32k __read_mostly; - -#ifdef CONFIG_ARCH_OMAP16XX -static cycle_t omap16xx_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k; -} -#else -#define omap16xx_32k_read NULL -#endif - -#ifdef CONFIG_ARCH_OMAP2420 -static cycle_t omap2420_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k; -} -#else -#define omap2420_32k_read NULL -#endif - -#ifdef CONFIG_ARCH_OMAP2430 -static cycle_t omap2430_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k; -} -#else -#define omap2430_32k_read NULL -#endif - -#ifdef CONFIG_ARCH_OMAP3 -static cycle_t omap34xx_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k; -} -#else -#define omap34xx_32k_read NULL -#endif - -#ifdef CONFIG_ARCH_OMAP4 -static cycle_t omap44xx_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k; -} -#else -#define omap44xx_32k_read NULL -#endif - -/* - * Kernel assumes that sched_clock can be called early but may not have - * things ready yet. - */ -static cycle_t omap_32k_read_dummy(struct clocksource *cs) -{ - return 0; -} - -static struct clocksource clocksource_32k = { - .name = "32k_counter", - .rating = 250, - .read = omap_32k_read_dummy, - .mask = CLOCKSOURCE_MASK(32), - .shift = 10, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -/* - * Returns current time from boot in nsecs. It's OK for this to wrap - * around for now, as it's just a relative time stamp. - */ -unsigned long long sched_clock(void) -{ - return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k), - clocksource_32k.mult, clocksource_32k.shift); -} - -/** - * read_persistent_clock - Return time from a persistent clock. - * - * Reads the time from a source which isn't disabled during PM, the - * 32k sync timer. Convert the cycles elapsed since last read into - * nsecs and adds to a monotonically increasing timespec. - */ -static struct timespec persistent_ts; -static cycles_t cycles, last_cycles; -void read_persistent_clock(struct timespec *ts) -{ - unsigned long long nsecs; - cycles_t delta; - struct timespec *tsp = &persistent_ts; - - last_cycles = cycles; - cycles = clocksource_32k.read(&clocksource_32k); - delta = cycles - last_cycles; - - nsecs = clocksource_cyc2ns(delta, - clocksource_32k.mult, clocksource_32k.shift); - - timespec_add_ns(tsp, nsecs); - *ts = *tsp; -} - -static int __init omap_init_clocksource_32k(void) -{ - static char err[] __initdata = KERN_ERR - "%s: can't register clocksource!\n"; - - if (cpu_is_omap16xx() || cpu_class_is_omap2()) { - struct clk *sync_32k_ick; - - if (cpu_is_omap16xx()) - clocksource_32k.read = omap16xx_32k_read; - else if (cpu_is_omap2420()) - clocksource_32k.read = omap2420_32k_read; - else if (cpu_is_omap2430()) - clocksource_32k.read = omap2430_32k_read; - else if (cpu_is_omap34xx()) - clocksource_32k.read = omap34xx_32k_read; - else if (cpu_is_omap44xx()) - clocksource_32k.read = omap44xx_32k_read; - else - return -ENODEV; - - sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); - if (sync_32k_ick) - clk_enable(sync_32k_ick); - - clocksource_32k.mult = clocksource_hz2mult(32768, - clocksource_32k.shift); - - offset_32k = clocksource_32k.read(&clocksource_32k); - - if (clocksource_register(&clocksource_32k)) - printk(err, clocksource_32k.name); - } - return 0; -} -arch_initcall(omap_init_clocksource_32k); - -#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */ - -/* Global address base setup code */ - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - -static void __init __omap2_set_globals(struct omap_globals *omap2_globals) -{ - omap2_set_globals_tap(omap2_globals); - omap2_set_globals_sdrc(omap2_globals); - omap2_set_globals_control(omap2_globals); - omap2_set_globals_prcm(omap2_globals); - omap2_set_globals_uart(omap2_globals); -} - -#endif - -#if defined(CONFIG_ARCH_OMAP2420) - -static struct omap_globals omap242x_globals = { - .class = OMAP242X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x48014000), - .sdrc = OMAP2420_SDRC_BASE, - .sms = OMAP2420_SMS_BASE, - .ctrl = OMAP2420_CTRL_BASE, - .prm = OMAP2420_PRM_BASE, - .cm = OMAP2420_CM_BASE, - .uart1_phys = OMAP2_UART1_BASE, - .uart2_phys = OMAP2_UART2_BASE, - .uart3_phys = OMAP2_UART3_BASE, -}; - -void __init omap2_set_globals_242x(void) -{ - __omap2_set_globals(&omap242x_globals); -} -#endif - -#if defined(CONFIG_ARCH_OMAP2430) - -static struct omap_globals omap243x_globals = { - .class = OMAP243X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), - .sdrc = OMAP243X_SDRC_BASE, - .sms = OMAP243X_SMS_BASE, - .ctrl = OMAP243X_CTRL_BASE, - .prm = OMAP2430_PRM_BASE, - .cm = OMAP2430_CM_BASE, - .uart1_phys = OMAP2_UART1_BASE, - .uart2_phys = OMAP2_UART2_BASE, - .uart3_phys = OMAP2_UART3_BASE, -}; - -void __init omap2_set_globals_243x(void) -{ - __omap2_set_globals(&omap243x_globals); -} -#endif - -#if defined(CONFIG_ARCH_OMAP3) - -static struct omap_globals omap3_globals = { - .class = OMAP343X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), - .sdrc = OMAP343X_SDRC_BASE, - .sms = OMAP343X_SMS_BASE, - .ctrl = OMAP343X_CTRL_BASE, - .prm = OMAP3430_PRM_BASE, - .cm = OMAP3430_CM_BASE, - .uart1_phys = OMAP3_UART1_BASE, - .uart2_phys = OMAP3_UART2_BASE, - .uart3_phys = OMAP3_UART3_BASE, - .uart4_phys = OMAP3_UART4_BASE, /* Only on 3630 */ -}; - -void __init omap2_set_globals_3xxx(void) -{ - __omap2_set_globals(&omap3_globals); -} - -void __init omap3_map_io(void) -{ - omap2_set_globals_3xxx(); - omap34xx_map_common_io(); -} -#endif - -#if defined(CONFIG_ARCH_OMAP4) -static struct omap_globals omap4_globals = { - .class = OMAP443X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - .ctrl = OMAP443X_CTRL_BASE, - .prm = OMAP4430_PRM_BASE, - .cm = OMAP4430_CM_BASE, - .cm2 = OMAP4430_CM2_BASE, - .uart1_phys = OMAP4_UART1_BASE, - .uart2_phys = OMAP4_UART2_BASE, - .uart3_phys = OMAP4_UART3_BASE, - .uart4_phys = OMAP4_UART4_BASE, -}; - -void __init omap2_set_globals_443x(void) -{ - omap2_set_globals_tap(&omap4_globals); - omap2_set_globals_control(&omap4_globals); - omap2_set_globals_prcm(&omap4_globals); - omap2_set_globals_uart(&omap4_globals); -} -#endif - diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c new file mode 100644 index 000000000000..155fe43a672b --- /dev/null +++ b/arch/arm/plat-omap/counter_32k.c @@ -0,0 +1,183 @@ +/* + * OMAP 32ksynctimer/counter_32k-related code + * + * Copyright (C) 2009 Texas Instruments + * Copyright (C) 2010 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * NOTE: This timer is not the same timer as the old OMAP1 MPU timer. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <plat/common.h> +#include <plat/board.h> + +#include <plat/clock.h> + + +/* + * 32KHz clocksource ... always available, on pretty most chips except + * OMAP 730 and 1510. Other timers could be used as clocksources, with + * higher resolution in free-running counter modes (e.g. 12 MHz xtal), + * but systems won't necessarily want to spend resources that way. + */ + +#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410 + +#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) + +#include <linux/clocksource.h> + +/* + * offset_32k holds the init time counter value. It is then subtracted + * from every counter read to achieve a counter that counts time from the + * kernel boot (needed for sched_clock()). + */ +static u32 offset_32k __read_mostly; + +#ifdef CONFIG_ARCH_OMAP16XX +static cycle_t omap16xx_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k; +} +#else +#define omap16xx_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2420 +static cycle_t omap2420_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k; +} +#else +#define omap2420_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP2430 +static cycle_t omap2430_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k; +} +#else +#define omap2430_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static cycle_t omap34xx_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k; +} +#else +#define omap34xx_32k_read NULL +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static cycle_t omap44xx_32k_read(struct clocksource *cs) +{ + return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k; +} +#else +#define omap44xx_32k_read NULL +#endif + +/* + * Kernel assumes that sched_clock can be called early but may not have + * things ready yet. + */ +static cycle_t omap_32k_read_dummy(struct clocksource *cs) +{ + return 0; +} + +static struct clocksource clocksource_32k = { + .name = "32k_counter", + .rating = 250, + .read = omap_32k_read_dummy, + .mask = CLOCKSOURCE_MASK(32), + .shift = 10, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +/* + * Returns current time from boot in nsecs. It's OK for this to wrap + * around for now, as it's just a relative time stamp. + */ +unsigned long long sched_clock(void) +{ + return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k), + clocksource_32k.mult, clocksource_32k.shift); +} + +/** + * read_persistent_clock - Return time from a persistent clock. + * + * Reads the time from a source which isn't disabled during PM, the + * 32k sync timer. Convert the cycles elapsed since last read into + * nsecs and adds to a monotonically increasing timespec. + */ +static struct timespec persistent_ts; +static cycles_t cycles, last_cycles; +void read_persistent_clock(struct timespec *ts) +{ + unsigned long long nsecs; + cycles_t delta; + struct timespec *tsp = &persistent_ts; + + last_cycles = cycles; + cycles = clocksource_32k.read(&clocksource_32k); + delta = cycles - last_cycles; + + nsecs = clocksource_cyc2ns(delta, + clocksource_32k.mult, clocksource_32k.shift); + + timespec_add_ns(tsp, nsecs); + *ts = *tsp; +} + +static int __init omap_init_clocksource_32k(void) +{ + static char err[] __initdata = KERN_ERR + "%s: can't register clocksource!\n"; + + if (cpu_is_omap16xx() || cpu_class_is_omap2()) { + struct clk *sync_32k_ick; + + if (cpu_is_omap16xx()) + clocksource_32k.read = omap16xx_32k_read; + else if (cpu_is_omap2420()) + clocksource_32k.read = omap2420_32k_read; + else if (cpu_is_omap2430()) + clocksource_32k.read = omap2430_32k_read; + else if (cpu_is_omap34xx()) + clocksource_32k.read = omap34xx_32k_read; + else if (cpu_is_omap44xx()) + clocksource_32k.read = omap44xx_32k_read; + else + return -ENODEV; + + sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); + if (sync_32k_ick) + clk_enable(sync_32k_ick); + + clocksource_32k.mult = clocksource_hz2mult(32768, + clocksource_32k.shift); + + offset_32k = clocksource_32k.read(&clocksource_32k); + + if (clocksource_register(&clocksource_32k)) + printk(err, clocksource_32k.name); + } + return 0; +} +arch_initcall(omap_init_clocksource_32k); + +#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */ + diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 6d3d33360056..11c54ec8d47f 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -40,7 +40,7 @@ static struct clk *mpu_clk; /* TODO: Add support for SDRAM timing changes */ -int omap_verify_speed(struct cpufreq_policy *policy) +static int omap_verify_speed(struct cpufreq_policy *policy) { if (freq_table) return cpufreq_frequency_table_verify(policy, freq_table); @@ -58,7 +58,7 @@ int omap_verify_speed(struct cpufreq_policy *policy) return 0; } -unsigned int omap_getspeed(unsigned int cpu) +static unsigned int omap_getspeed(unsigned int cpu) { unsigned long rate; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index d1920be7833b..1e2383eae638 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -21,7 +21,6 @@ #include <asm/mach/map.h> #include <plat/tc.h> -#include <plat/control.h> #include <plat/board.h> #include <plat/mmc.h> #include <mach/gpio.h> @@ -232,46 +231,6 @@ static void omap_init_uwire(void) static inline void omap_init_uwire(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) - -static struct resource wdt_resources[] = { - { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -static void omap_init_wdt(void) -{ - if (cpu_is_omap16xx()) - wdt_resources[0].start = 0xfffeb000; - else if (cpu_is_omap2420()) - wdt_resources[0].start = 0x48022000; /* WDT2 */ - else if (cpu_is_omap2430()) - wdt_resources[0].start = 0x49016000; /* WDT2 */ - else if (cpu_is_omap343x()) - wdt_resources[0].start = 0x48314000; /* WDT2 */ - else if (cpu_is_omap44xx()) - wdt_resources[0].start = 0x4a314000; - else - return; - - wdt_resources[0].end = wdt_resources[0].start + 0x4f; - - (void) platform_device_register(&omap_wdt_device); -} -#else -static inline void omap_init_wdt(void) {} -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -300,7 +259,6 @@ static int __init omap_init_devices(void) omap_init_rng(); omap_init_mcpdm(); omap_init_uwire(); - omap_init_wdt(); return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index ec7eddf9e525..f5c5b8da9a87 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -30,6 +30,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/delay.h> #include <asm/system.h> #include <mach/hardware.h> @@ -996,11 +997,17 @@ void omap_start_dma(int lch) l = dma_read(CCR(lch)); /* - * Errata: On ES2.0 BUFFERING disable must be set. - * This will always fail on ES1.0 + * Errata: Inter Frame DMA buffering issue (All OMAP2420 and + * OMAP2430ES1.0): DMA will wrongly buffer elements if packing and + * bursting is enabled. This might result in data gets stalled in + * FIFO at the end of the block. + * Workaround: DMA channels must have BUFFERING_DISABLED bit set to + * guarantee no data will stay in the DMA FIFO in case inter frame + * buffering occurs. */ - if (cpu_is_omap24xx()) - l |= OMAP_DMA_CCR_EN; + if (cpu_is_omap2420() || + (cpu_is_omap2430() && (omap_type() == OMAP2430_REV_ES1_0))) + l |= OMAP_DMA_CCR_BUFFERING_DISABLE; l |= OMAP_DMA_CCR_EN; dma_write(l, CCR(lch)); @@ -1018,8 +1025,39 @@ void omap_stop_dma(int lch) dma_write(0, CICR(lch)); l = dma_read(CCR(lch)); - l &= ~OMAP_DMA_CCR_EN; - dma_write(l, CCR(lch)); + /* OMAP3 Errata i541: sDMA FIFO draining does not finish */ + if (cpu_is_omap34xx() && (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) { + int i = 0; + u32 sys_cf; + + /* Configure No-Standby */ + l = dma_read(OCP_SYSCONFIG); + sys_cf = l; + l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK; + l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE); + dma_write(l , OCP_SYSCONFIG); + + l = dma_read(CCR(lch)); + l &= ~OMAP_DMA_CCR_EN; + dma_write(l, CCR(lch)); + + /* Wait for sDMA FIFO drain */ + l = dma_read(CCR(lch)); + while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE | + OMAP_DMA_CCR_WR_ACTIVE))) { + udelay(5); + i++; + l = dma_read(CCR(lch)); + } + if (i >= 100) + printk(KERN_ERR "DMA drain did not complete on " + "lch %d\n", lch); + /* Restore OCP_SYSCONFIG */ + dma_write(sys_cf, OCP_SYSCONFIG); + } else { + l &= ~OMAP_DMA_CCR_EN; + dma_write(l, CCR(lch)); + } if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 44bafdab2dce..cabcd0f66b40 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -292,10 +292,10 @@ static spinlock_t dm_timer_lock; static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg) { if (timer->posted) - while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) + while (__raw_readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) & (reg >> WPSHIFT)) cpu_relax(); - return readl(timer->io_base + (reg & 0xff)); + return __raw_readl(timer->io_base + (reg & 0xff)); } /* @@ -308,7 +308,7 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, u32 value) { if (timer->posted) - while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) + while (__raw_readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) & (reg >> WPSHIFT)) cpu_relax(); writel(value, timer->io_base + (reg & 0xff)); @@ -581,7 +581,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) * When the functional clock disappears, too quick writes seem * to cause an abort. XXX Is this still necessary? */ - __delay(150000); + __delay(300000); return ret; } diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 0054b9501a53..725df5c1569d 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -36,6 +36,8 @@ #include <plat/board.h> #include <plat/sram.h> +#include "fb.h" + #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static struct omapfb_platform_data omapfb_config; diff --git a/arch/arm/plat-omap/fb.h b/arch/arm/plat-omap/fb.h new file mode 100644 index 000000000000..d765d0bd8520 --- /dev/null +++ b/arch/arm/plat-omap/fb.h @@ -0,0 +1,10 @@ +#ifndef __PLAT_OMAP_FB_H__ +#define __PLAT_OMAP_FB_H__ + +extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long pstart_avail, + unsigned long size_avail); + +#endif /* __PLAT_OMAP_FB_H__ */ diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 7951eefe1a0e..c05c653d1674 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -2084,9 +2084,10 @@ void omap2_gpio_prepare_for_idle(int power_state) for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; - u32 l1, l2; + u32 l1 = 0, l2 = 0; + int j; - if (bank->dbck_enable_mask) + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) clk_disable(bank->dbck); if (power_state > PWRDM_POWER_OFF) @@ -2151,9 +2152,10 @@ void omap2_gpio_resume_after_idle(void) min = 1; for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; - u32 l, gen, gen0, gen1; + u32 l = 0, gen, gen0, gen1; + int j; - if (bank->dbck_enable_mask) + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) clk_enable(bank->dbck); if (!workaround_enabled) diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 9776b41ad76f..a9d69a09920d 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -47,6 +47,7 @@ struct omap_globals { unsigned long sdrc; /* SDRAM Controller */ unsigned long sms; /* SDRAM Memory Scheduler */ unsigned long ctrl; /* System Control Module */ + unsigned long ctrl_pad; /* PAD Control Module */ unsigned long prm; /* Power and Reset Management */ unsigned long cm; /* Clock Management */ unsigned long cm2; @@ -66,7 +67,6 @@ void omap2_set_globals_tap(struct omap_globals *); void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); -void omap2_set_globals_uart(struct omap_globals *); void omap3_map_io(void); @@ -91,7 +91,8 @@ void omap3_map_io(void); }) extern struct device *omap2_get_mpuss_device(void); -extern struct device *omap2_get_dsp_device(void); +extern struct device *omap2_get_iva_device(void); extern struct device *omap2_get_l3_device(void); +extern struct device *omap4_get_dsp_device(void); #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 2e2ae530fced..3fd8b4055727 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -68,10 +68,9 @@ unsigned int omap_rev(void); #define OMAP_REVBITS_00 0x00 #define OMAP_REVBITS_01 0x01 #define OMAP_REVBITS_02 0x02 -#define OMAP_REVBITS_10 0x10 -#define OMAP_REVBITS_20 0x20 -#define OMAP_REVBITS_30 0x30 -#define OMAP_REVBITS_40 0x40 +#define OMAP_REVBITS_03 0x03 +#define OMAP_REVBITS_04 0x04 +#define OMAP_REVBITS_05 0x05 /* * Get the CPU revision for OMAP devices @@ -363,23 +362,24 @@ IS_OMAP_TYPE(3517, 0x3517) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 -#define OMAP2420_REV_ES1_0 0x24200024 -#define OMAP2420_REV_ES2_0 0x24201024 +#define OMAP2420_REV_ES1_0 OMAP242X_CLASS +#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (OMAP_REVBITS_01 << 8)) #define OMAP243X_CLASS 0x24300024 -#define OMAP2430_REV_ES1_0 0x24300024 +#define OMAP2430_REV_ES1_0 OMAP243X_CLASS #define OMAP343X_CLASS 0x34300034 -#define OMAP3430_REV_ES1_0 0x34300034 -#define OMAP3430_REV_ES2_0 0x34301034 -#define OMAP3430_REV_ES2_1 0x34302034 -#define OMAP3430_REV_ES3_0 0x34303034 -#define OMAP3430_REV_ES3_1 0x34304034 -#define OMAP3430_REV_ES3_1_2 0x34305034 - -#define OMAP3630_REV_ES1_0 0x36300034 -#define OMAP3630_REV_ES1_1 0x36300134 -#define OMAP3630_REV_ES1_2 0x36300234 +#define OMAP3430_REV_ES1_0 OMAP343X_CLASS +#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (OMAP_REVBITS_01 << 8)) +#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (OMAP_REVBITS_02 << 8)) +#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (OMAP_REVBITS_03 << 8)) +#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (OMAP_REVBITS_04 << 8)) +#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (OMAP_REVBITS_05 << 8)) + +#define OMAP363X_CLASS 0x36300034 +#define OMAP3630_REV_ES1_0 OMAP363X_CLASS +#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (OMAP_REVBITS_01 << 8)) +#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (OMAP_REVBITS_02 << 8)) #define OMAP35XX_CLASS 0x35000034 #define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) @@ -390,7 +390,8 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) #define OMAP443X_CLASS 0x44300044 -#define OMAP4430_REV_ES1_0 0x44300044 +#define OMAP4430_REV_ES1_0 OMAP443X_CLASS +#define OMAP4430_REV_ES2_0 0x44301044 /* * omap_chip bits @@ -417,10 +418,12 @@ IS_OMAP_TYPE(3517, 0x3517) #define CHIP_IS_OMAP4430ES1 (1 << 8) #define CHIP_IS_OMAP3630ES1_1 (1 << 9) #define CHIP_IS_OMAP3630ES1_2 (1 << 10) +#define CHIP_IS_OMAP4430ES2 (1 << 11) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) -#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1) +#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \ + CHIP_IS_OMAP4430ES2) /* * "GE" here represents "greater than or equal to" in terms of ES diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index af3a03941add..0cce4ca83aa0 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -319,6 +319,8 @@ #define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ #define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ +#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ +#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) @@ -335,6 +337,10 @@ #define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) #define OMAP_DMA_CCR_EN (1 << 7) +#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9) +#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10) +#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24) +#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25) #define OMAP_DMA_DATA_TYPE_S8 0x00 #define OMAP_DMA_DATA_TYPE_S16 0x01 diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 20f1054c0a80..dfa3aff9761b 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -45,6 +45,8 @@ #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 struct omap_dm_timer; +extern struct omap_dm_timer *gptimer_wakeup; +extern struct sys_timer omap_timer; struct clk; int omap_dm_timer_init(void); diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h new file mode 100644 index 000000000000..872de0bf1e6b --- /dev/null +++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h @@ -0,0 +1,35 @@ +/* + * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h + * + * Copyright (C) 2009 Li-Pro.Net + * Stephan Linz <linz@li-pro.net> + * + * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__ + +struct omap_smsc911x_platform_data { + int cs; + int gpio_irq; + int gpio_reset; + u32 flags; +}; + +#if defined(CONFIG_SMSC911X) || \ + defined(CONFIG_SMSC911X_MODULE) + +extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); + +#else + +static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d) +{ +} + +#endif +#endif diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 87f6bf2ea4fa..36a0befd6168 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -18,6 +18,8 @@ * 02110-1301 USA * */ +#ifndef __ASM__ARCH_OMAP_I2C_H +#define __ASM__ARCH_OMAP_I2C_H #include <linux/i2c.h> @@ -36,3 +38,5 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, void __init omap1_i2c_mux_pins(int bus_id); void __init omap2_i2c_mux_pins(int bus_id); + +#endif /* __ASM__ARCH_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index c01d9f08a198..65e20a686713 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -345,6 +345,8 @@ #define INT_34XX_MMC3_IRQ 94 #define INT_34XX_GPT12_IRQ 95 +#define INT_36XX_UART4_IRQ 80 + #define INT_35XX_HECC0_IRQ 24 #define INT_35XX_HECC1_IRQ 28 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67 diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index b4ff6a11a8f2..e19abf2c8fe7 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -312,6 +312,18 @@ #define RFSREN 0x0002 #define RSYNCERREN 0x0001 +/* CLKR signal muxing options */ +#define CLKR_SRC_CLKR 0 +#define CLKR_SRC_CLKX 1 + +/* FSR signal muxing options */ +#define FSR_SRC_FSR 0 +#define FSR_SRC_FSX 1 + +/* McBSP functional clock sources */ +#define MCBSP_CLKS_PRCM_SRC 0 +#define MCBSP_CLKS_PAD_SRC 1 + /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { u16 spcr2; @@ -398,6 +410,7 @@ struct omap_mcbsp_spi_cfg { struct omap_mcbsp_ops { void (*request)(unsigned int); void (*free)(unsigned int); + int (*set_clks_src)(u8, u8); }; struct omap_mcbsp_platform_data { @@ -464,6 +477,9 @@ struct omap_mcbsp { extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count, omap_mcbsp_cache_size; +#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) +#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; + int omap_mcbsp_init(void); void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, int size); @@ -502,6 +518,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); +/* McBSP functional clock source changing function */ +extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); /* SPI specific API */ void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); @@ -510,6 +528,10 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf); int omap_mcbsp_pollwrite(unsigned int id, u16 buf); int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); +/* McBSP signal muxing API */ +void omap2_mcbsp1_mux_clkr_src(u8 mux); +void omap2_mcbsp1_mux_fsr_src(u8 mux); + #ifdef CONFIG_ARCH_OMAP3 /* Sidetone specific API */ int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 9b89ec601ee2..f57f36abb07e 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -71,12 +71,17 @@ struct omap_mmc_platform_data { u64 dma_mask; + /* Register offset deviation */ + u16 reg_offset; + struct omap_mmc_slot_data { - /* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC; - * 8 wire signaling is also optional, and is used with HSMMC + /* + * 4/8 wires and any additional host capabilities + * need to OR'd all capabilities (ref. linux/mmc/host.h) */ - u8 wires; + u8 wires; /* Used for the MMC driver on omap1 and 2420 */ + u32 caps; /* Used for the MMC driver on 2430 and later */ /* * nomux means "standard" muxing is wrong on this board, and @@ -104,6 +109,7 @@ struct omap_mmc_platform_data { /* we can put the features above into this variable */ #define HSMMC_HAS_PBIAS (1 << 0) +#define HSMMC_HAS_UPDATED_RESET (1 << 1) unsigned features; int switch_pin; /* gpio (card detect) */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h new file mode 100644 index 000000000000..c8dae02f0704 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -0,0 +1,128 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R <govindraj.raja@ti.com> + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __OMAP_SERIAL_H__ +#define __OMAP_SERIAL_H__ + +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <plat/mux.h> + +#define DRIVER_NAME "omap-hsuart" + +/* + * Use tty device name as ttyO, [O -> OMAP] + * in bootargs we specify as console=ttyO0 if uart1 + * is used as console uart. + */ +#define OMAP_SERIAL_NAME "ttyO" + +#define OMAP_MDR1_DISABLE 0x07 +#define OMAP_MDR1_MODE13X 0x03 +#define OMAP_MDR1_MODE16X 0x00 +#define OMAP_MODE13X_SPEED 230400 + +/* + * LCR = 0XBF: Switch to Configuration Mode B. + * In configuration mode b allow access + * to EFR,DLL,DLH. + * Reference OMAP TRM Chapter 17 + * Section: 1.4.3 Mode Selection + */ +#define OMAP_UART_LCR_CONF_MDB 0XBF + +/* WER = 0x7F + * Enable module level wakeup in WER reg + */ +#define OMAP_UART_WER_MOD_WKUP 0X7F + +/* Enable XON/XOFF flow control on output */ +#define OMAP_UART_SW_TX 0x04 + +/* Enable XON/XOFF flow control on input */ +#define OMAP_UART_SW_RX 0x04 + +#define OMAP_UART_SYSC_RESET 0X07 +#define OMAP_UART_TCR_TRIG 0X0F +#define OMAP_UART_SW_CLR 0XF0 +#define OMAP_UART_FIFO_CLR 0X06 + +#define OMAP_UART_DMA_CH_FREE -1 + +#define RX_TIMEOUT (3 * HZ) +#define OMAP_MAX_HSUART_PORTS 4 + +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + +struct omap_uart_port_info { + bool dma_enabled; /* To specify DMA Mode */ + unsigned int uartclk; /* UART clock rate */ + void __iomem *membase; /* ioremap cookie or NULL */ + resource_size_t mapbase; /* resource base */ + unsigned long irqflags; /* request_irq flags */ + upf_t flags; /* UPF_* flags */ +}; + +struct uart_omap_dma { + u8 uart_dma_tx; + u8 uart_dma_rx; + int rx_dma_channel; + int tx_dma_channel; + dma_addr_t rx_buf_dma_phys; + dma_addr_t tx_buf_dma_phys; + unsigned int uart_base; + /* + * Buffer for rx dma.It is not required for tx because the buffer + * comes from port structure. + */ + unsigned char *rx_buf; + unsigned int prev_rx_dma_pos; + int tx_buf_size; + int tx_dma_used; + int rx_dma_used; + spinlock_t tx_lock; + spinlock_t rx_lock; + /* timer to poll activity on rx dma */ + struct timer_list rx_timer; + int rx_buf_size; + int rx_timeout; +}; + +struct uart_omap_port { + struct uart_port port; + struct uart_omap_dma uart_dma; + struct platform_device *pdev; + + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char fcr; + unsigned char efr; + + int use_dma; + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ + unsigned int lsr_break_flag; + unsigned char msr_saved_flags; + char name[20]; + unsigned long port_activity; +}; + +#endif /* __OMAP_SERIAL_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h index 7055672a8c68..92df9e27cc5c 100644 --- a/arch/arm/plat-omap/include/plat/omap24xx.h +++ b/arch/arm/plat-omap/include/plat/omap24xx.h @@ -40,7 +40,7 @@ #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) #define OMAP24XX_IVA_INTC_BASE 0x40000000 -#define OMAP2420_CTRL_BASE L4_24XX_BASE +#define OMAP242X_CTRL_BASE L4_24XX_BASE #define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) #define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) #define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 25cd9ac3b095..28e2d1a78433 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -36,6 +36,8 @@ #include <plat/omap_hwmod.h> +extern struct device omap_device_parent; + /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 #define OMAP_DEVICE_STATE_ENABLED 1 @@ -62,7 +64,6 @@ * */ struct omap_device { - u32 magic; struct platform_device pdev; struct omap_hwmod **hwmods; struct omap_device_pm_latency *pm_lats; @@ -82,7 +83,6 @@ int omap_device_shutdown(struct platform_device *pdev); /* Core code interface */ -bool omap_device_is_valid(struct omap_device *od); int omap_device_count_resources(struct omap_device *od); int omap_device_fill_resources(struct omap_device *od, struct resource *res); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index a4e508dfaba2..7eaa8edf3b14 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -14,19 +14,16 @@ * * These headers and macros are used to define OMAP on-chip module * data and their integration with other OMAP modules and Linux. - * - * References: - * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) - * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) - * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) - * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140) - * - Open Core Protocol Specification 2.2 + * Copious documentation and references can also be found in the + * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this + * writing). * * To do: * - add interconnect error log structures * - add pinmuxing * - init_conn_id_bit (CONNID_BIT_VECTOR) * - implement default hwmod SMS/SDRC flags? + * - remove unused fields * */ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H @@ -35,6 +32,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/ioport.h> +#include <linux/mutex.h> #include <plat/cpu.h> struct omap_device; @@ -96,7 +94,7 @@ struct omap_hwmod_irq_info { /** * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) - * @dma_ch: DMA channel ID + * @dma_req: DMA request ID * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -104,7 +102,20 @@ struct omap_hwmod_irq_info { */ struct omap_hwmod_dma_info { const char *name; - u16 dma_ch; + u16 dma_req; +}; + +/** + * struct omap_hwmod_rst_info - IPs reset lines use by hwmod + * @name: name of the reset line (module local name) + * @rst_shift: Offset of the reset bit + * + * @name should be something short, e.g., "cpu0" or "rst". It is defined + * locally to the hwmod. + */ +struct omap_hwmod_rst_info { + const char *name; + u8 rst_shift; }; /** @@ -237,8 +248,9 @@ struct omap_hwmod_ocp_if { #define SYSC_HAS_CLOCKACTIVITY (1 << 4) #define SYSC_HAS_SIDLEMODE (1 << 5) #define SYSC_HAS_MIDLEMODE (1 << 6) -#define SYSS_MISSING (1 << 7) +#define SYSS_HAS_RESET_STATUS (1 << 7) #define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ +#define SYSC_HAS_RESET_STATUS (1 << 9) /* omap_hwmod_sysconfig.clockact flags */ #define CLOCKACT_TEST_BOTH 0x0 @@ -327,10 +339,12 @@ struct omap_hwmod_omap2_prcm { /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data * @clkctrl_reg: PRCM address of the clock control register + * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { void __iomem *clkctrl_reg; + void __iomem *rstctrl_reg; u8 submodule_wkdep_bit; }; @@ -352,6 +366,11 @@ struct omap_hwmod_omap4_prcm { * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup * HWMOD_NO_IDLEST : this module does not have idle status - this is the case * only for few initiator modules on OMAP2 & 3. + * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset. + * This is needed for devices like DSS that require optional clocks enabled + * in order to complete the reset. Optional clocks will be disabled + * again after the reset. + * HWMOD_16BIT_REG: Module has 16bit registers */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -360,6 +379,8 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_NO_OCP_AUTOIDLE (1 << 4) #define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) #define HWMOD_NO_IDLEST (1 << 6) +#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) +#define HWMOD_16BIT_REG (1 << 8) /* * omap_hwmod._int_flags definitions @@ -410,7 +431,7 @@ struct omap_hwmod_class { * @class: struct omap_hwmod_class * to the class of this hwmod * @od: struct omap_device currently associated with this hwmod (internal use) * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) - * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt) + * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt) * @prcm: PRCM data pertaining to this hwmod * @main_clk: main clock: OMAP clock name * @_clk: pointer to the main struct clk (filled in at runtime) @@ -424,7 +445,7 @@ struct omap_hwmod_class { * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6) * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift * @mpu_irqs_cnt: number of @mpu_irqs - * @sdma_chs_cnt: number of @sdma_chs + * @sdma_reqs_cnt: number of @sdma_reqs * @opt_clks_cnt: number of @opt_clks * @master_cnt: number of @master entries * @slaves_cnt: number of @slave entries @@ -433,6 +454,7 @@ struct omap_hwmod_class { * @_state: internal-use hwmod state * @flags: hwmod flags (documented below) * @omap_chip: OMAP chips this hwmod is present on + * @_mutex: mutex serializing operations on this hwmod * @node: list node for hwmod list (internal use) * * @main_clk refers to this module's "main clock," which for our @@ -448,7 +470,8 @@ struct omap_hwmod { struct omap_hwmod_class *class; struct omap_device *od; struct omap_hwmod_irq_info *mpu_irqs; - struct omap_hwmod_dma_info *sdma_chs; + struct omap_hwmod_dma_info *sdma_reqs; + struct omap_hwmod_rst_info *rst_lines; union { struct omap_hwmod_omap2_prcm omap2; struct omap_hwmod_omap4_prcm omap4; @@ -461,6 +484,7 @@ struct omap_hwmod { void *dev_attr; u32 _sysc_cache; void __iomem *_mpu_rt_va; + struct mutex _mutex; struct list_head node; u16 flags; u8 _mpu_port_index; @@ -468,7 +492,8 @@ struct omap_hwmod { u8 msuspendmux_shift; u8 response_lat; u8 mpu_irqs_cnt; - u8 sdma_chs_cnt; + u8 sdma_reqs_cnt; + u8 rst_lines_cnt; u8 opt_clks_cnt; u8 masters_cnt; u8 slaves_cnt; @@ -492,6 +517,10 @@ int omap_hwmod_idle(struct omap_hwmod *oh); int _omap_hwmod_idle(struct omap_hwmod *oh); int omap_hwmod_shutdown(struct omap_hwmod *oh); +int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); +int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); +int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); + int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); @@ -500,8 +529,8 @@ int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); -void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs); -u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs); +void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); +u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); @@ -534,5 +563,6 @@ int omap_hwmod_for_each_by_class(const char *classname, extern int omap2420_hwmod_init(void); extern int omap2430_hwmod_init(void); extern int omap3xxx_hwmod_init(void); +extern int omap44xx_hwmod_init(void); #endif diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h index fb6ec74fe39e..9ca420dcd2f8 100644 --- a/arch/arm/plat-omap/include/plat/powerdomain.h +++ b/arch/arm/plat-omap/include/plat/powerdomain.h @@ -32,6 +32,7 @@ /* Powerdomain allowable state bitfields */ #define PWRSTS_ON (1 << PWRDM_POWER_ON) +#define PWRSTS_OFF (1 << PWRDM_POWER_OFF) #define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ (1 << PWRDM_POWER_ON)) @@ -161,5 +162,6 @@ int pwrdm_state_switch(struct powerdomain *pwrdm); int pwrdm_clkdm_state_switch(struct clockdomain *clkdm); int pwrdm_pre_transition(void); int pwrdm_post_transition(void); +int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); #endif diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h index 9fbd91419cd1..ab77442e42ab 100644 --- a/arch/arm/plat-omap/include/plat/prcm.h +++ b/arch/arm/plat-omap/include/plat/prcm.h @@ -38,6 +38,8 @@ u32 prm_read_mod_reg(s16 module, u16 idx); void prm_write_mod_reg(u32 val, s16 module, u16 idx); u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask); +u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask); +u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg); u32 cm_read_mod_reg(s16 module, u16 idx); void cm_write_mod_reg(u32 val, s16 module, u16 idx); u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx); diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 7b76f50564ba..efd87c8dda69 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -147,6 +147,7 @@ struct memory_timings { }; extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode); +struct omap_sdrc_params *rx51_get_sdram_timings(void); u32 omap2xxx_sdrc_dll_is_unlocked(void); u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index 5177a9c5a25a..ecd6a488c497 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -18,6 +18,7 @@ #define OMAP_ARCH_SMP_H #include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> /* Needed for secondary core boot */ extern void omap_secondary_startup(void); @@ -33,15 +34,4 @@ static inline void smp_cross_call(const struct cpumask *mask) gic_raise_softirq(mask, 1); } -/* - * Read MPIDR: Multiprocessor affinity register - */ -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - #endif diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 16a1b458d53c..5905100b29a1 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -11,7 +11,6 @@ #ifndef __ARCH_ARM_OMAP_SRAM_H #define __ARCH_ARM_OMAP_SRAM_H -extern int __init omap_sram_init(void); extern void * omap_sram_push(void * start, unsigned long size); extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ddf723be48dc..9036e374e0ac 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -139,10 +139,14 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP2(1, omap3evm); DEBUG_LL_OMAP3(1, omap_3430sdp); DEBUG_LL_OMAP3(1, omap_3630sdp); + DEBUG_LL_OMAP3(1, omap3530_lv_som); + DEBUG_LL_OMAP3(1, omap3_torpedo); /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); + DEBUG_LL_OMAP3(3, cm_t3517); DEBUG_LL_OMAP3(3, igep0020); + DEBUG_LL_OMAP3(3, igep0030); DEBUG_LL_OMAP3(3, nokia_rx51); DEBUG_LL_OMAP3(3, omap3517evm); DEBUG_LL_OMAP3(3, omap3_beagle); @@ -153,6 +157,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap4 based boards using UART3 */ DEBUG_LL_OMAP4(3, omap_4430sdp); + DEBUG_LL_OMAP4(3, omap4_panda); /* zoom2/3 external uart */ DEBUG_LL_ZOOM(omap_zoom2); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 2a9427c8cc48..667456228a12 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -105,7 +105,7 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata) #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) void omap2_usbfs_init(struct omap_usb_config *pdata); #else -static inline omap2_usbfs_init(struct omap_usb_config *pdata) +static inline void omap2_usbfs_init(struct omap_usb_config *pdata) { } #endif diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index a202a2ce6e3d..6cd151b31bc5 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -320,6 +320,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da) if ((start <= da) && (da < start + bytes)) { dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", __func__, start, da, bytes); + iotlb_load_cr(obj, &cr); iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); } } diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e31496e35b0f..eac4b978e9fd 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -33,7 +33,7 @@ struct omap_mcbsp **mcbsp_ptr; int omap_mcbsp_count, omap_mcbsp_cache_size; -void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) +static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) { if (cpu_class_is_omap1()) { ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val; @@ -47,7 +47,7 @@ void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) } } -int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache) +static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache) { if (cpu_class_is_omap1()) { return !from_cache ? __raw_readw(mcbsp->io_base + reg) : @@ -62,12 +62,12 @@ int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache) } #ifdef CONFIG_ARCH_OMAP3 -void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) +static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) { __raw_writel(val, mcbsp->st_data->io_base_st + reg); } -int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg) +static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg) { return __raw_readl(mcbsp->st_data->io_base_st + reg); } @@ -80,9 +80,6 @@ int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg) #define MCBSP_READ_CACHE(mcbsp, reg) \ omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1) -#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) -#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; - #define MCBSP_ST_READ(mcbsp, reg) \ omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg) #define MCBSP_ST_WRITE(mcbsp, reg, val) \ @@ -156,7 +153,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) /* Writing zero to RSYNC_ERR clears the IRQ */ MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1)); } else { - complete(&mcbsp_rx->tx_irq_completion); + complete(&mcbsp_rx->rx_irq_completion); } return IRQ_HANDLED; @@ -878,7 +875,7 @@ EXPORT_SYMBOL(omap_mcbsp_free); void omap_mcbsp_start(unsigned int id, int tx, int rx) { struct omap_mcbsp *mcbsp; - int idle; + int enable_srg = 0; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -893,10 +890,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7; mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7; - idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | - MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); + /* Only enable SRG, if McBSP is master */ + w = MCBSP_READ_CACHE(mcbsp, PCR0); + if (w & (FSXM | FSRM | CLKXM | CLKRM)) + enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | + MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); - if (idle) { + if (enable_srg) { /* Start the sample generator */ w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6)); @@ -919,7 +919,7 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) */ udelay(500); - if (idle) { + if (enable_srg) { /* Start frame sync */ w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); @@ -1645,7 +1645,7 @@ static const struct attribute_group sidetone_attr_group = { .attrs = (struct attribute **)sidetone_attrs, }; -int __devinit omap_st_add(struct omap_mcbsp *mcbsp) +static int __devinit omap_st_add(struct omap_mcbsp *mcbsp) { struct omap_mcbsp_platform_data *pdata = mcbsp->pdata; struct omap_mcbsp_st_data *st_data; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index d2b160942ccc..abe933cd8f09 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -82,6 +82,7 @@ #include <linux/slab.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/clk.h> #include <plat/omap_device.h> #include <plat/omap_hwmod.h> @@ -90,12 +91,6 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 -/* - * OMAP_DEVICE_MAGIC: used to determine whether a struct omap_device - * obtained via container_of() is in fact a struct omap_device - */ -#define OMAP_DEVICE_MAGIC 0xf00dcafe - /* Private functions */ /** @@ -243,6 +238,44 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev) return container_of(pdev, struct omap_device, pdev); } +/** + * _add_optional_clock_alias - Add clock alias for hwmod optional clocks + * @od: struct omap_device *od + * + * For every optional clock present per hwmod per omap_device, this function + * adds an entry in the clocks list of the form <dev-id=dev_name, con-id=role> + * if an entry is already present in it with the form <dev-id=NULL, con-id=role> + * + * The function is called from inside omap_device_build_ss(), after + * omap_device_register. + * + * This allows drivers to get a pointer to its optional clocks based on its role + * by calling clk_get(<dev*>, <role>). + * + * No return value. + */ +static void _add_optional_clock_alias(struct omap_device *od, + struct omap_hwmod *oh) +{ + int i; + + for (i = 0; i < oh->opt_clks_cnt; i++) { + struct omap_hwmod_opt_clk *oc; + int r; + + oc = &oh->opt_clks[i]; + + if (!oc->_clk) + continue; + + r = clk_add_alias(oc->role, dev_name(&od->pdev.dev), + (char *)oc->clk, &od->pdev.dev); + if (r) + pr_err("omap_device: %s: clk_add_alias for %s failed\n", + dev_name(&od->pdev.dev), oc->role); + } +} + /* Public functions for use by core code */ @@ -257,12 +290,11 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev) */ int omap_device_count_resources(struct omap_device *od) { - struct omap_hwmod *oh; int c = 0; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - c += omap_hwmod_count_resources(oh); + for (i = 0; i < od->hwmods_cnt; i++) + c += omap_hwmod_count_resources(od->hwmods[i]); pr_debug("omap_device: %s: counted %d total resources across %d " "hwmods\n", od->pdev.name, c, od->hwmods_cnt); @@ -289,12 +321,11 @@ int omap_device_count_resources(struct omap_device *od) */ int omap_device_fill_resources(struct omap_device *od, struct resource *res) { - struct omap_hwmod *oh; int c = 0; int i, r; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) { - r = omap_hwmod_fill_resources(oh, res); + for (i = 0; i < od->hwmods_cnt; i++) { + r = omap_hwmod_fill_resources(od->hwmods[i], res); res += r; c += r; } @@ -414,15 +445,15 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, od->pm_lats = pm_lats; od->pm_lats_cnt = pm_lats_cnt; - od->magic = OMAP_DEVICE_MAGIC; - if (is_early_device) ret = omap_early_device_register(od); else ret = omap_device_register(od); - for (i = 0; i < oh_cnt; i++) + for (i = 0; i < oh_cnt; i++) { hwmods[i]->od = od; + _add_optional_clock_alias(od, hwmods[i]); + } if (ret) goto odbs_exit4; @@ -473,6 +504,7 @@ int omap_device_register(struct omap_device *od) { pr_debug("omap_device: %s: registering\n", od->pdev.name); + od->pdev.dev.parent = &omap_device_parent; return platform_device_register(&od->pdev); } @@ -566,7 +598,6 @@ int omap_device_shutdown(struct platform_device *pdev) { int ret, i; struct omap_device *od; - struct omap_hwmod *oh; od = _find_by_pdev(pdev); @@ -579,8 +610,8 @@ int omap_device_shutdown(struct platform_device *pdev) ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT); - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_shutdown(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_shutdown(od->hwmods[i]); od->_state = OMAP_DEVICE_STATE_SHUTDOWN; @@ -627,18 +658,6 @@ int omap_device_align_pm_lat(struct platform_device *pdev, } /** - * omap_device_is_valid - Check if pointer is a valid omap_device - * @od: struct omap_device * - * - * Return whether struct omap_device pointer @od points to a valid - * omap_device. - */ -bool omap_device_is_valid(struct omap_device *od) -{ - return (od && od->magic == OMAP_DEVICE_MAGIC); -} - -/** * omap_device_get_pwrdm - return the powerdomain * associated with @od * @od: struct omap_device * * @@ -692,11 +711,10 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od) */ int omap_device_enable_hwmods(struct omap_device *od) { - struct omap_hwmod *oh; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_enable(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_enable(od->hwmods[i]); /* XXX pass along return value here? */ return 0; @@ -710,11 +728,10 @@ int omap_device_enable_hwmods(struct omap_device *od) */ int omap_device_idle_hwmods(struct omap_device *od) { - struct omap_hwmod *oh; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_idle(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_idle(od->hwmods[i]); /* XXX pass along return value here? */ return 0; @@ -729,11 +746,10 @@ int omap_device_idle_hwmods(struct omap_device *od) */ int omap_device_disable_clocks(struct omap_device *od) { - struct omap_hwmod *oh; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_disable_clocks(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_disable_clocks(od->hwmods[i]); /* XXX pass along return value here? */ return 0; @@ -748,12 +764,22 @@ int omap_device_disable_clocks(struct omap_device *od) */ int omap_device_enable_clocks(struct omap_device *od) { - struct omap_hwmod *oh; int i; - for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) - omap_hwmod_enable_clocks(oh); + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_enable_clocks(od->hwmods[i]); /* XXX pass along return value here? */ return 0; } + +struct device omap_device_parent = { + .init_name = "omap", + .parent = &platform_bus, +}; + +static int __init omap_device_init(void) +{ + return device_register(&omap_device_parent); +} +core_initcall(omap_device_init); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 10b3b4c63372..e2c8eebe6b3a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/omapfb.h> #include <asm/tlb.h> #include <asm/cacheflush.h> @@ -30,8 +31,8 @@ #include <plat/cpu.h> #include <plat/vram.h> -#include <plat/control.h> - +#include "sram.h" +#include "fb.h" #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) # include "../mach-omap2/prm.h" # include "../mach-omap2/cm.h" @@ -53,7 +54,7 @@ #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) #define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2PLUS) #define SRAM_BOOTLOADER_SZ 0x00 #else #define SRAM_BOOTLOADER_SZ 0x80 @@ -68,7 +69,6 @@ #define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) #define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) #define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) -#define OMAP34XX_VA_CONTROL_STAT OMAP2_L4_IO_ADDRESS(0x480022F0) #define GP_DEVICE 0x300 @@ -79,12 +79,6 @@ static unsigned long omap_sram_base; static unsigned long omap_sram_size; static unsigned long omap_sram_ceil; -extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail); - /* * Depending on the target RAMFS firewall setup, the public usable amount of * SRAM varies. The default accessible size for all device types is 2k. A GP @@ -93,16 +87,7 @@ extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart, */ static int is_sram_locked(void) { - int type = 0; - - if (cpu_is_omap44xx()) - /* Not yet supported */ - return 0; - - if (cpu_is_omap242x()) - type = omap_rev() & OMAP2_DEVICETYPE_MASK; - - if (type == GP_DEVICE) { + if (OMAP2_DEVICE_TYPE_GP == omap_type()) { /* RAMFW: R/W access to all initiators for all qualifier sets */ if (cpu_is_omap242x()) { __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ @@ -127,7 +112,7 @@ static int is_sram_locked(void) * to secure SRAM will hang the system. Also the SRAM is not * yet mapped at this point. */ -void __init omap_detect_sram(void) +static void __init omap_detect_sram(void) { unsigned long reserved; @@ -213,7 +198,7 @@ static struct map_desc omap_sram_io_desc[] __initdata = { /* * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. */ -void __init omap_map_sram(void) +static void __init omap_map_sram(void) { unsigned long base; @@ -330,7 +315,7 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) #endif #ifdef CONFIG_ARCH_OMAP2420 -int __init omap242x_sram_init(void) +static int __init omap242x_sram_init(void) { _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, omap242x_sram_ddr_init_sz); @@ -351,7 +336,7 @@ static inline int omap242x_sram_init(void) #endif #ifdef CONFIG_ARCH_OMAP2430 -int __init omap243x_sram_init(void) +static int __init omap243x_sram_init(void) { _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, omap243x_sram_ddr_init_sz); @@ -407,7 +392,7 @@ void omap3_sram_restore_context(void) } #endif /* CONFIG_PM */ -int __init omap34xx_sram_init(void) +static int __init omap34xx_sram_init(void) { _omap3_sram_configure_core_dpll = omap_sram_push(omap3_sram_configure_core_dpll, @@ -423,7 +408,7 @@ static inline int omap34xx_sram_init(void) #endif #ifdef CONFIG_ARCH_OMAP4 -int __init omap44xx_sram_init(void) +static int __init omap44xx_sram_init(void) { printk(KERN_ERR "FIXME: %s not implemented\n", __func__); diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h new file mode 100644 index 000000000000..29b43ef97f20 --- /dev/null +++ b/arch/arm/plat-omap/sram.h @@ -0,0 +1,6 @@ +#ifndef __PLAT_OMAP_SRAM_H__ +#define __PLAT_OMAP_SRAM_H__ + +extern int __init omap_sram_init(void); + +#endif /* __PLAT_OMAP_SRAM_H__ */ diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 984bf66826d2..5a27b1b538f2 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -69,6 +69,7 @@ config S3C24XX_GPIO_EXTRA int default 128 if S3C24XX_GPIO_EXTRA128 default 64 if S3C24XX_GPIO_EXTRA64 + default 16 if ARCH_H1940 default 0 config S3C24XX_GPIO_EXTRA64 diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 4c0896f2572d..243b6411050d 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -74,11 +74,6 @@ static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset) return -EINVAL; } -static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) -{ - return IRQ_EINT8 + offset; -} - static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { .set_config = s3c_gpio_setcfg_s3c24xx_a, .get_config = s3c_gpio_getcfg_s3c24xx_a, @@ -157,12 +152,13 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { [6] = { .base = S3C2410_GPGCON, .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .irq_base = IRQ_EINT8, .chip = { .base = S3C2410_GPG(0), .owner = THIS_MODULE, .label = "GPIOG", .ngpio = 16, - .to_irq = s3c24xx_gpiolib_bankg_toirq, + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = S3C2410_GPHCON, diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index c6a855db2fb6..65dbfa8e0a86 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) + depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) default y select ARM_VIC if !ARCH_S5PV310 select ARM_GIC if ARCH_S5PV310 @@ -30,7 +30,12 @@ config S5P_EXT_INT bool help Use the external interrupts (other than GPIO interrupts.) - Note: Do not choose this for S5P6440. + Note: Do not choose this for S5P6440 and S5P6450. + +config S5P_GPIO_INT + bool + help + Common code for the GPIO interrupts (other than external interrupts.) config S5P_DEV_FIMC0 bool @@ -46,3 +51,8 @@ config S5P_DEV_FIMC2 bool help Compile in platform device definitions for FIMC controller 2 + +config S5P_DEV_ONENAND + bool + help + Compile in platform device definition for OneNAND controller diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index b2e029673950..de65238a7aef 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -18,9 +18,13 @@ obj-y += cpu.o obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o +obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += irq-pm.o # devices obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o +obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index b5e255265f20..818800962694 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -74,19 +74,18 @@ struct clk clk_fout_epll = { .ctrlbit = (1 << 31), }; -/* VPLL clock output */ -struct clk clk_fout_vpll = { - .name = "fout_vpll", +/* DPLL clock output */ +struct clk clk_fout_dpll = { + .name = "fout_dpll", .id = -1, .ctrlbit = (1 << 31), }; -/* ARM clock */ -struct clk clk_arm = { - .name = "armclk", +/* VPLL clock output */ +struct clk clk_fout_vpll = { + .name = "fout_vpll", .id = -1, - .rate = 0, - .ctrlbit = 0, + .ctrlbit = (1 << 31), }; /* Possible clock sources for APLL Mux */ @@ -122,6 +121,17 @@ struct clksrc_sources clk_src_epll = { .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; +/* Possible clock sources for DPLL Mux */ +static struct clk *clk_src_dpll_list[] = { + [0] = &clk_fin_dpll, + [1] = &clk_fout_dpll, +}; + +struct clksrc_sources clk_src_dpll = { + .sources = clk_src_dpll_list, + .nr_sources = ARRAY_SIZE(clk_src_dpll_list), +}; + struct clk clk_vpll = { .name = "vpll", .id = -1, @@ -145,8 +155,8 @@ static struct clk *s5p_clks[] __initdata = { &clk_fout_apll, &clk_fout_mpll, &clk_fout_epll, + &clk_fout_dpll, &clk_fout_vpll, - &clk_arm, &clk_vpll, &clk_xusbxti, }; diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index b07a078fd284..74f7f5a5446c 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -19,6 +19,7 @@ #include <plat/cpu.h> #include <plat/s5p6440.h> #include <plat/s5p6442.h> +#include <plat/s5p6450.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> #include <plat/s5pv310.h> @@ -27,6 +28,7 @@ static const char name_s5p6440[] = "S5P6440"; static const char name_s5p6442[] = "S5P6442"; +static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static const char name_s5pv310[] = "S5PV310"; @@ -38,7 +40,7 @@ static struct cpu_table cpu_ids[] __initdata = { .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, - .init = s5p6440_init, + .init = s5p64x0_init, .name = name_s5p6440, }, { .idcode = 0x36442000, @@ -49,6 +51,14 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p6442_init, .name = name_s5p6442, }, { + .idcode = 0x36450000, + .idmask = 0xffffff00, + .map_io = s5p6450_map_io, + .init_clocks = s5p6450_init_clocks, + .init_uarts = s5p6450_init_uarts, + .init = s5p64x0_init, + .name = name_s5p6450, + }, { .idcode = 0x43100000, .idmask = 0xfffff000, .map_io = s5pc100_map_io, @@ -89,33 +99,11 @@ static struct map_desc s5p_iodesc[] __initdata = { .length = SZ_64K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, -#ifdef CONFIG_ARM_VIC - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, -#endif - }, { .virtual = (unsigned long)S3C_VA_TIMER, .pfn = __phys_to_pfn(S5P_PA_TIMER), .length = SZ_16K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S3C_VA_WATCHDOG, .pfn = __phys_to_pfn(S3C_PA_WDT), .length = SZ_4K, diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c index f8ede33ee82b..6db926202caa 100644 --- a/arch/arm/mach-s5pv210/dev-onenand.c +++ b/arch/arm/plat-s5p/dev-onenand.c @@ -1,10 +1,12 @@ -/* - * linux/arch/arm/mach-s5pv210/dev-onenand.c +/* linux/arch/arm/plat-s5p/dev-onenand.c + * + * Copyright 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2008-2010 Samsung Electronics * Kyungmin Park <kyungmin.park@samsung.com> * - * S5PC110 series device definition for OneNAND devices + * S5P series device definition for OneNAND devices * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,15 +21,15 @@ #include <mach/irqs.h> #include <mach/map.h> -static struct resource s5pc110_onenand_resources[] = { +static struct resource s5p_onenand_resources[] = { [0] = { - .start = S5PC110_PA_ONENAND, - .end = S5PC110_PA_ONENAND + SZ_128K - 1, + .start = S5P_PA_ONENAND, + .end = S5P_PA_ONENAND + SZ_128K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = S5PC110_PA_ONENAND_DMA, - .end = S5PC110_PA_ONENAND_DMA + SZ_8K - 1, + .start = S5P_PA_ONENAND_DMA, + .end = S5P_PA_ONENAND_DMA + SZ_8K - 1, .flags = IORESOURCE_MEM, }, [2] = { @@ -37,19 +39,19 @@ static struct resource s5pc110_onenand_resources[] = { }, }; -struct platform_device s5pc110_device_onenand = { +struct platform_device s5p_device_onenand = { .name = "s5pc110-onenand", .id = -1, - .num_resources = ARRAY_SIZE(s5pc110_onenand_resources), - .resource = s5pc110_onenand_resources, + .num_resources = ARRAY_SIZE(s5p_onenand_resources), + .resource = s5p_onenand_resources, }; -void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata) +void s5p_onenand_set_platdata(struct onenand_platform_data *pdata) { struct onenand_platform_data *pd; pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); if (!pd) printk(KERN_ERR "%s: no memory for platform data\n", __func__); - s5pc110_device_onenand.dev.platform_data = pd; + s5p_device_onenand.dev.platform_data = pd; } diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index a89331ef4ae1..6a7342886171 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -119,6 +119,56 @@ static struct resource s5p_uart3_resource[] = { #endif }; +static struct resource s5p_uart4_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 4 + [0] = { + .start = S5P_PA_UART4, + .end = S5P_PA_UART4 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX4, + .end = IRQ_S5P_UART_RX4, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX4, + .end = IRQ_S5P_UART_TX4, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR4, + .end = IRQ_S5P_UART_ERR4, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + +static struct resource s5p_uart5_resource[] = { +#if CONFIG_SERIAL_SAMSUNG_UARTS > 5 + [0] = { + .start = S5P_PA_UART5, + .end = S5P_PA_UART5 + S5P_SZ_UART, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S5P_UART_RX5, + .end = IRQ_S5P_UART_RX5, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S5P_UART_TX5, + .end = IRQ_S5P_UART_TX5, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_S5P_UART_ERR5, + .end = IRQ_S5P_UART_ERR5, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { [0] = { .resources = s5p_uart0_resource, @@ -136,4 +186,12 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = { .resources = s5p_uart3_resource, .nr_resources = ARRAY_SIZE(s5p_uart3_resource), }, + [4] = { + .resources = s5p_uart4_resource, + .nr_resources = ARRAY_SIZE(s5p_uart4_resource), + }, + [5] = { + .resources = s5p_uart5_resource, + .nr_resources = ARRAY_SIZE(s5p_uart5_resource), + }, }; diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h index 3fb3a3a17465..7f653bce3c13 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -94,4 +94,20 @@ ((irq) - S5P_EINT_BASE1) : \ ((irq) + 16 - S5P_EINT_BASE2)) +/* Typically only a few gpio chips require gpio interrupt support. + To avoid memory waste irq descriptors are allocated only for + S5P_GPIOINT_GROUP_COUNT chips, each with total number of + S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged + to any gpio chip with the s5p_register_gpio_interrupt() function */ +#define S5P_GPIOINT_GROUP_COUNT 4 +#define S5P_GPIOINT_GROUP_SIZE 8 +#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE) + +/* IRQ types common for all s5p platforms */ +#define S5P_IRQ_TYPE_LEVEL_LOW (0x00) +#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01) +#define S5P_IRQ_TYPE_EDGE_FALLING (0x02) +#define S5P_IRQ_TYPE_EDGE_RISING (0x03) +#define S5P_IRQ_TYPE_EDGE_BOTH (0x04) + #endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h index c4ff88bf6477..c833f3f21816 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -18,6 +18,9 @@ #define S5P_VA_SYSTIMER S3C_ADDR(0x01200000) #define S5P_VA_SROMC S3C_ADDR(0x01100000) #define S5P_VA_SYSRAM S3C_ADDR(0x01180000) +#define S3C_VA_USB_HSPHY S3C_ADDR(0x02000000) +#define S5P_VA_DMC0 S3C_ADDR(0x00A00000) +#define S5P_VA_DMC1 S3C_ADDR(0x00A80000) #define S5P_VA_COMBINER_BASE S3C_ADDR(0x00600000) #define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10) diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h index 4e8fe08cb70d..bf28fadee7ae 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-s5p/include/plat/pll.h @@ -47,6 +47,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, } #define PLL46XX_KDIV_MASK (0xFFFF) +#define PLL4650C_KDIV_MASK (0xFFF) #define PLL46XX_MDIV_MASK (0x1FF) #define PLL46XX_PDIV_MASK (0x3F) #define PLL46XX_SDIV_MASK (0x7) @@ -57,6 +58,7 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, enum pll46xx_type_t { pll_4600, pll_4650, + pll_4650c, }; static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, @@ -72,6 +74,11 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; kdiv = pll_con1 & PLL46XX_KDIV_MASK; + if (pll_type == pll_4650c) + kdiv = pll_con1 & PLL4650C_KDIV_MASK; + else + kdiv = pll_con1 & PLL46XX_KDIV_MASK; + tmp = baseclk; if (pll_type == pll_4600) { diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h index 09418b1101fe..17036c898409 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Header file for s5p clock support * @@ -20,6 +20,7 @@ #define clk_fin_apll clk_ext_xtal_mux #define clk_fin_mpll clk_ext_xtal_mux #define clk_fin_epll clk_ext_xtal_mux +#define clk_fin_dpll clk_ext_xtal_mux #define clk_fin_vpll clk_ext_xtal_mux #define clk_fin_hpll clk_ext_xtal_mux @@ -30,6 +31,7 @@ extern struct clk s5p_clk_27m; extern struct clk clk_fout_apll; extern struct clk clk_fout_mpll; extern struct clk clk_fout_epll; +extern struct clk clk_fout_dpll; extern struct clk clk_fout_vpll; extern struct clk clk_arm; extern struct clk clk_vpll; @@ -37,8 +39,8 @@ extern struct clk clk_vpll; extern struct clksrc_sources clk_src_apll; extern struct clksrc_sources clk_src_mpll; extern struct clksrc_sources clk_src_epll; +extern struct clksrc_sources clk_src_dpll; -extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable); extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); #endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h index a4cd75afeb3b..528585d2cafc 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6440.h +++ b/arch/arm/plat-s5p/include/plat/s5p6440.h @@ -12,24 +12,23 @@ /* Common init code for S5P6440 related SoCs */ -extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s5p6440_register_clocks(void); extern void s5p6440_setup_clocks(void); #ifdef CONFIG_CPU_S5P6440 -extern int s5p6440_init(void); +extern int s5p64x0_init(void); extern void s5p6440_init_irq(void); extern void s5p6440_map_io(void); extern void s5p6440_init_clocks(int xtal); -#define s5p6440_init_uarts s5p6440_common_init_uarts +extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); #else #define s5p6440_init_clocks NULL #define s5p6440_init_uarts NULL #define s5p6440_map_io NULL -#define s5p6440_init NULL +#define s5p64x0_init NULL #endif /* S5P6440 timer */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h new file mode 100644 index 000000000000..640a41c26be3 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p6450.h @@ -0,0 +1,36 @@ +/* arch/arm/plat-s5p/include/plat/s5p6450.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for s5p6450 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S5P6450 related SoCs */ + +extern void s5p6450_register_clocks(void); +extern void s5p6450_setup_clocks(void); + +#ifdef CONFIG_CPU_S5P6450 + +extern int s5p64x0_init(void); +extern void s5p6450_init_irq(void); +extern void s5p6450_map_io(void); +extern void s5p6450_init_clocks(int xtal); + +extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +#else +#define s5p6450_init_clocks NULL +#define s5p6450_init_uarts NULL +#define s5p6450_map_io NULL +#define s5p64x0_init NULL +#endif + +/* S5P6450 timer */ + +extern struct sys_timer s5p6450_timer; diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c index f36cd3327025..752f1a645f9d 100644 --- a/arch/arm/plat-s5p/irq-eint.c +++ b/arch/arm/plat-s5p/irq-eint.c @@ -67,23 +67,23 @@ static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type) switch (type) { case IRQ_TYPE_EDGE_RISING: - newvalue = S5P_EXTINT_RISEEDGE; + newvalue = S5P_IRQ_TYPE_EDGE_RISING; break; case IRQ_TYPE_EDGE_FALLING: - newvalue = S5P_EXTINT_FALLEDGE; + newvalue = S5P_IRQ_TYPE_EDGE_FALLING; break; case IRQ_TYPE_EDGE_BOTH: - newvalue = S5P_EXTINT_BOTHEDGE; + newvalue = S5P_IRQ_TYPE_EDGE_BOTH; break; case IRQ_TYPE_LEVEL_LOW: - newvalue = S5P_EXTINT_LOWLEV; + newvalue = S5P_IRQ_TYPE_LEVEL_LOW; break; case IRQ_TYPE_LEVEL_HIGH: - newvalue = S5P_EXTINT_HILEV; + newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; break; default: diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c new file mode 100644 index 000000000000..0e5dc8cbf5e3 --- /dev/null +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -0,0 +1,237 @@ +/* linux/arch/arm/plat-s5p/irq-gpioint.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Author: Kyungmin Park <kyungmin.park@samsung.com> + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * Author: Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> + +#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x)) + +#define GPIOINT_CON_OFFSET 0x700 +#define GPIOINT_MASK_OFFSET 0x900 +#define GPIOINT_PEND_OFFSET 0xA00 + +static struct s3c_gpio_chip *irq_chips[S5P_GPIOINT_GROUP_MAXNR]; + +static int s5p_gpioint_get_group(unsigned int irq) +{ + struct gpio_chip *chip = get_irq_data(irq); + struct s3c_gpio_chip *s3c_chip = container_of(chip, + struct s3c_gpio_chip, chip); + int group; + + for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) + if (s3c_chip == irq_chips[group]) + break; + + return group; +} + +static int s5p_gpioint_get_offset(unsigned int irq) +{ + struct gpio_chip *chip = get_irq_data(irq); + struct s3c_gpio_chip *s3c_chip = container_of(chip, + struct s3c_gpio_chip, chip); + + return irq - s3c_chip->irq_base; +} + +static void s5p_gpioint_ack(unsigned int irq) +{ + int group, offset, pend_offset; + unsigned int value; + + group = s5p_gpioint_get_group(irq); + offset = s5p_gpioint_get_offset(irq); + pend_offset = group << 2; + + value = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset); + value |= 1 << offset; + __raw_writel(value, S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset); +} + +static void s5p_gpioint_mask(unsigned int irq) +{ + int group, offset, mask_offset; + unsigned int value; + + group = s5p_gpioint_get_group(irq); + offset = s5p_gpioint_get_offset(irq); + mask_offset = group << 2; + + value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); + value |= 1 << offset; + __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); +} + +static void s5p_gpioint_unmask(unsigned int irq) +{ + int group, offset, mask_offset; + unsigned int value; + + group = s5p_gpioint_get_group(irq); + offset = s5p_gpioint_get_offset(irq); + mask_offset = group << 2; + + value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); + value &= ~(1 << offset); + __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); +} + +static void s5p_gpioint_mask_ack(unsigned int irq) +{ + s5p_gpioint_mask(irq); + s5p_gpioint_ack(irq); +} + +static int s5p_gpioint_set_type(unsigned int irq, unsigned int type) +{ + int group, offset, con_offset; + unsigned int value; + + group = s5p_gpioint_get_group(irq); + offset = s5p_gpioint_get_offset(irq); + con_offset = group << 2; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + type = S5P_IRQ_TYPE_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + type = S5P_IRQ_TYPE_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + type = S5P_IRQ_TYPE_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + type = S5P_IRQ_TYPE_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + type = S5P_IRQ_TYPE_LEVEL_LOW; + break; + case IRQ_TYPE_NONE: + default: + printk(KERN_WARNING "No irq type\n"); + return -EINVAL; + } + + value = __raw_readl(S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset); + value &= ~(0x7 << (offset * 0x4)); + value |= (type << (offset * 0x4)); + __raw_writel(value, S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset); + + return 0; +} + +struct irq_chip s5p_gpioint = { + .name = "s5p_gpioint", + .ack = s5p_gpioint_ack, + .mask = s5p_gpioint_mask, + .mask_ack = s5p_gpioint_mask_ack, + .unmask = s5p_gpioint_unmask, + .set_type = s5p_gpioint_set_type, +}; + +static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) +{ + int group, offset, pend_offset, mask_offset; + int real_irq; + unsigned int pend, mask; + + for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) { + pend_offset = group << 2; + pend = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + + pend_offset); + if (!pend) + continue; + + mask_offset = group << 2; + mask = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + + mask_offset); + pend &= ~mask; + + for (offset = 0; offset < 8; offset++) { + if (pend & (1 << offset)) { + struct s3c_gpio_chip *chip = irq_chips[group]; + if (chip) { + real_irq = chip->irq_base + offset; + generic_handle_irq(real_irq); + } + } + } + } +} + +static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) +{ + static int used_gpioint_groups = 0; + static bool handler_registered = 0; + int irq, group = chip->group; + int i; + + if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) + return -ENOMEM; + + chip->irq_base = S5P_GPIOINT_BASE + + used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE; + used_gpioint_groups++; + + if (!handler_registered) { + set_irq_chained_handler(IRQ_GPIOINT, s5p_gpioint_handler); + handler_registered = 1; + } + + irq_chips[group] = chip; + for (i = 0; i < chip->chip.ngpio; i++) { + irq = chip->irq_base + i; + set_irq_chip(irq, &s5p_gpioint); + set_irq_data(irq, &chip->chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + return 0; +} + +int __init s5p_register_gpio_interrupt(int pin) +{ + struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin); + int offset, group; + int ret; + + if (!my_chip) + return -EINVAL; + + offset = pin - my_chip->chip.base; + group = my_chip->group; + + /* check if the group has been already registered */ + if (my_chip->irq_base) + return my_chip->irq_base + offset; + + /* register gpio group */ + ret = s5p_gpioint_add(my_chip); + if (ret == 0) { + my_chip->chip.to_irq = samsung_gpiolib_to_irq; + printk(KERN_INFO "Registered interrupt support for gpio group %d.\n", + group); + return my_chip->irq_base + offset; + } + return ret; +} diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c new file mode 100644 index 000000000000..dc33b9ecda45 --- /dev/null +++ b/arch/arm/plat-s5p/irq-pm.c @@ -0,0 +1,93 @@ +/* linux/arch/arm/plat-s5p/irq-pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/plat-s3c24xx/irq-pm.c, + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> + +#include <plat/cpu.h> +#include <plat/irqs.h> +#include <plat/pm.h> +#include <mach/map.h> + +#include <mach/regs-gpio.h> +#include <mach/regs-irq.h> + +/* state for IRQs over sleep */ + +/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM, + * as wakeup sources + * + * set bit to 1 in allow bitfield to enable the wakeup settings on it +*/ + +unsigned long s3c_irqwake_intallow = 0x00000006L; +unsigned long s3c_irqwake_eintallow = 0xffffffffL; + +int s3c_irq_wake(unsigned int irqno, unsigned int state) +{ + unsigned long irqbit; + + switch (irqno) { + case IRQ_RTC_TIC: + case IRQ_RTC_ALARM: + irqbit = 1 << (irqno + 1 - IRQ_RTC_ALARM); + if (!state) + s3c_irqwake_intmask |= irqbit; + else + s3c_irqwake_intmask &= ~irqbit; + break; + default: + return -ENOENT; + } + return 0; +} + +static struct sleep_save eint_save[] = { + SAVE_ITEM(S5P_EINT_CON(0)), + SAVE_ITEM(S5P_EINT_CON(1)), + SAVE_ITEM(S5P_EINT_CON(2)), + SAVE_ITEM(S5P_EINT_CON(3)), + + SAVE_ITEM(S5P_EINT_FLTCON(0)), + SAVE_ITEM(S5P_EINT_FLTCON(1)), + SAVE_ITEM(S5P_EINT_FLTCON(2)), + SAVE_ITEM(S5P_EINT_FLTCON(3)), + SAVE_ITEM(S5P_EINT_FLTCON(4)), + SAVE_ITEM(S5P_EINT_FLTCON(5)), + SAVE_ITEM(S5P_EINT_FLTCON(6)), + SAVE_ITEM(S5P_EINT_FLTCON(7)), + + SAVE_ITEM(S5P_EINT_MASK(0)), + SAVE_ITEM(S5P_EINT_MASK(1)), + SAVE_ITEM(S5P_EINT_MASK(2)), + SAVE_ITEM(S5P_EINT_MASK(3)), +}; + +int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save)); + + return 0; +} + +int s3c24xx_irq_resume(struct sys_device *dev) +{ + s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save)); + + return 0; +} + diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c new file mode 100644 index 000000000000..d592b6304b48 --- /dev/null +++ b/arch/arm/plat-s5p/pm.c @@ -0,0 +1,52 @@ +/* linux/arch/arm/plat-s5p/pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P Power Manager (Suspend-To-RAM) support + * + * Based on arch/arm/plat-s3c24xx/pm.c + * Copyright (c) 2004,2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/suspend.h> +#include <plat/pm.h> + +#define PFX "s5p pm: " + +/* s3c_pm_check_resume_pin + * + * check to see if the pin is configured correctly for sleep mode, and + * make any necessary adjustments if it is not +*/ + +static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +{ + /* nothing here yet */ +} + +/* s3c_pm_configure_extint + * + * configure all external interrupt pins +*/ + +void s3c_pm_configure_extint(void) +{ + /* nothing here yet */ +} + +void s3c_pm_restore_core(void) +{ + /* nothing here yet */ +} + +void s3c_pm_save_core(void) +{ + /* nothing here yet */ +} + diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 04d9521ddc9f..e8f2be2d67f2 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -435,7 +435,6 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) static int s3c_adc_resume(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); - unsigned long flags; clk_enable(adc->clk); enable_irq(adc->irq); diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c index 85aaf0f2842f..335bc35044d3 100644 --- a/arch/arm/plat-samsung/dev-hsmmc3.c +++ b/arch/arm/plat-samsung/dev-hsmmc3.c @@ -33,8 +33,8 @@ static struct resource s3c_hsmmc3_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_MMC3, - .end = IRQ_MMC3, + .start = IRQ_HSMMC3, + .end = IRQ_HSMMC3, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c index b83a83351cea..7743c4b8b2fb 100644 --- a/arch/arm/plat-samsung/gpio.c +++ b/arch/arm/plat-samsung/gpio.c @@ -157,3 +157,11 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) if (ret >= 0) s3c_gpiolib_track(chip); } + +int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct s3c_gpio_chip *s3c_chip = container_of(chip, + struct s3c_gpio_chip, chip); + + return s3c_chip->irq_base + offset; +} diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 85f6f23a510f..7d448e138792 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -67,13 +67,15 @@ extern struct platform_device s5pv210_device_spi0; extern struct platform_device s5pv210_device_spi1; extern struct platform_device s5p6440_device_spi0; extern struct platform_device s5p6440_device_spi1; +extern struct platform_device s5p6450_device_spi0; +extern struct platform_device s5p6450_device_spi1; extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_nand; extern struct platform_device s3c_device_onenand; extern struct platform_device s3c64xx_device_onenand1; -extern struct platform_device s5pc110_device_onenand; +extern struct platform_device s5p_device_onenand; extern struct platform_device s3c_device_usbgadget; extern struct platform_device s3c_device_usb_hsotg; @@ -95,6 +97,9 @@ extern struct platform_device s5p6442_device_spi; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; +extern struct platform_device s5p6450_device_iis0; +extern struct platform_device s5p6450_device_pcm0; + extern struct platform_device s5pc100_device_ac97; extern struct platform_device s5pc100_device_pcm0; extern struct platform_device s5pc100_device_pcm1; diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 1c6b92947c5d..5b43b95da68e 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -169,4 +169,22 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); */ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); +/** + * s5p_register_gpio_interrupt() - register interrupt support for a gpio group + * @pin: The pin number from the group to be registered + * + * This function registers gpio interrupt support for the group that the + * specified pin belongs to. + * + * The total number of gpio pins is quite large ob s5p series. Registering + * irq support for all of them would be a resource waste. Because of that the + * interrupt support for standard gpio pins is registered dynamically. + * + * It will return the irq number of the interrupt that has been registered + * or -ENOMEM if no more gpio interrupts can be registered. It is allowed + * to call this function more than once for the same gpio group (the group + * will be registered only once). + */ +extern int s5p_register_gpio_interrupt(int pin); + #endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index e358c7da8480..13a22b8861ef 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -43,6 +43,8 @@ struct s3c_gpio_cfg; * struct s3c_gpio_chip - wrapper for specific implementation of gpio * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. + * @group: The group register number for gpio interrupt support. + * @irq_base: The base irq number. * @config: special function and pull-resistor control information. * @lock: Lock for exclusive access to this gpio bank. * @pm_save: Save information for suspend/resume support. @@ -63,6 +65,8 @@ struct s3c_gpio_chip { struct s3c_gpio_cfg *config; struct s3c_gpio_pm *pm; void __iomem *base; + int irq_base; + int group; spinlock_t lock; #ifdef CONFIG_PM u32 pm_save[4]; @@ -118,6 +122,17 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); + +/** + * samsung_gpiolib_to_irq - convert gpio pin to irq number + * @chip: The gpio chip that the pin belongs to. + * @offset: The offset of the pin in the chip. + * + * This helper returns the irq number calculated from the chip->irq_base and + * the provided offset. + */ +extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset); + /* exported for core SoC support to change */ extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h index 5fe6721b57f7..810744213120 100644 --- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h @@ -32,6 +32,12 @@ enum dma_ch { DMACH_UART2_TX, DMACH_UART3_RX, DMACH_UART3_TX, + DMACH_UART4_RX, + DMACH_UART4_TX, + DMACH_UART5_RX, + DMACH_UART5_TX, + DMACH_USI_RX, + DMACH_USI_TX, DMACH_IRDA, DMACH_I2S0_RX, DMACH_I2S0_TX, @@ -64,6 +70,20 @@ enum dma_ch { DMACH_MSM_REQ2, DMACH_MSM_REQ1, DMACH_MSM_REQ0, + DMACH_SLIMBUS0_RX, + DMACH_SLIMBUS0_TX, + DMACH_SLIMBUS0AUX_RX, + DMACH_SLIMBUS0AUX_TX, + DMACH_SLIMBUS1_RX, + DMACH_SLIMBUS1_TX, + DMACH_SLIMBUS2_RX, + DMACH_SLIMBUS2_TX, + DMACH_SLIMBUS3_RX, + DMACH_SLIMBUS3_TX, + DMACH_SLIMBUS4_RX, + DMACH_SLIMBUS4_TX, + DMACH_SLIMBUS5_RX, + DMACH_SLIMBUS5_TX, /* END Marker, also used to denote a reserved channel */ DMACH_MAX, }; diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index e5aba8f95b79..ae8e802bdca8 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -65,7 +65,7 @@ struct s3c64xx_spi_info { extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); +extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); #endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 7df03f87fbfa..96528200eb79 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -192,7 +192,7 @@ struct s3c_gpio_pm s3c_gpio_pm_2bit = { .resume = s3c_gpio_pm_2bit_resume, }; -#ifdef CONFIG_ARCH_S3C64XX +#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); @@ -302,7 +302,7 @@ struct s3c_gpio_pm s3c_gpio_pm_4bit = { .save = s3c_gpio_pm_4bit_save, .resume = s3c_gpio_pm_4bit_resume, }; -#endif /* CONFIG_ARCH_S3C64XX */ +#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ /** * s3c_pm_save_gpio() - save gpio chip data for suspend diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig new file mode 100644 index 000000000000..1bf499570f42 --- /dev/null +++ b/arch/arm/plat-tcc/Kconfig @@ -0,0 +1,20 @@ +if ARCH_TCC_926 + +menu "Telechips ARM926-based CPUs" + +choice + prompt "Telechips CPU type:" + default ARCH_TCC8K + +config ARCH_TCC8K + bool TCC8000 + select USB_ARCH_HAS_OHCI + help + Support for Telechips TCC8000 systems + +endchoice + +source "arch/arm/mach-tcc8k/Kconfig" + +endmenu +endif diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile new file mode 100644 index 000000000000..eceabc869b8f --- /dev/null +++ b/arch/arm/plat-tcc/Makefile @@ -0,0 +1,3 @@ +# "Telechips Platform Common Modules" + +obj-y := clock.o system.o diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c new file mode 100644 index 000000000000..f3ced10d5271 --- /dev/null +++ b/arch/arm/plat-tcc/clock.c @@ -0,0 +1,179 @@ +/* + * Clock framework for Telechips SoCs + * Based on arch/arm/plat-mxc/clock.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com> + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2010 Hans J. Koch, hjk@linutronix.de + * + * Licensed under the terms of the GPL v2. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/string.h> + +#include <mach/clock.h> +#include <mach/hardware.h> + +static DEFINE_MUTEX(clocks_mutex); + +/*------------------------------------------------------------------------- + * Standard clock functions defined in include/linux/clk.h + *-------------------------------------------------------------------------*/ + +static void __clk_disable(struct clk *clk) +{ + BUG_ON(clk->refcount == 0); + + if (!(--clk->refcount) && clk->disable) { + /* Unconditionally disable the clock in hardware */ + clk->disable(clk); + /* recursively disable parents */ + if (clk->parent) + __clk_disable(clk->parent); + } +} + +static int __clk_enable(struct clk *clk) +{ + int ret = 0; + + if (clk->refcount++ == 0 && clk->enable) { + if (clk->parent) + ret = __clk_enable(clk->parent); + if (ret) + return ret; + else + return clk->enable(clk); + } + + return 0; +} + +/* This function increments the reference count on the clock and enables the + * clock if not already enabled. The parent clock tree is recursively enabled + */ +int clk_enable(struct clk *clk) +{ + int ret = 0; + + if (!clk) + return -EINVAL; + + mutex_lock(&clocks_mutex); + ret = __clk_enable(clk); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_enable); + +/* This function decrements the reference count on the clock and disables + * the clock when reference count is 0. The parent clock tree is + * recursively disabled + */ +void clk_disable(struct clk *clk) +{ + if (!clk) + return; + + mutex_lock(&clocks_mutex); + __clk_disable(clk); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL_GPL(clk_disable); + +/* Retrieve the *current* clock rate. If the clock itself + * does not provide a special calculation routine, ask + * its parent and so on, until one is able to return + * a valid clock rate + */ +unsigned long clk_get_rate(struct clk *clk) +{ + if (!clk) + return 0UL; + + if (clk->get_rate) + return clk->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL_GPL(clk_get_rate); + +/* Round the requested clock rate to the nearest supported + * rate that is less than or equal to the requested rate. + * This is dependent on the clock's current parent. + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (!clk) + return 0; + if (!clk->round_rate) + return 0; + + return clk->round_rate(clk, rate); +} +EXPORT_SYMBOL_GPL(clk_round_rate); + +/* Set the clock to the requested clock rate. The rate must + * match a supported rate exactly based on what clk_round_rate returns + */ +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + + if (!clk) + return ret; + if (!clk->set_rate || !rate) + return ret; + + mutex_lock(&clocks_mutex); + ret = clk->set_rate(clk, rate); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_rate); + +/* Set the clock's parent to another clock source */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + struct clk *old; + int ret = -EINVAL; + + if (!clk) + return ret; + if (!clk->set_parent || !parent) + return ret; + + mutex_lock(&clocks_mutex); + old = clk->parent; + if (clk->refcount) + __clk_enable(parent); + ret = clk->set_parent(clk, parent); + if (ret) + old = parent; + if (clk->refcount) + __clk_disable(old); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_parent); + +/* Retrieve the clock's parent clock source */ +struct clk *clk_get_parent(struct clk *clk) +{ + if (!clk) + return NULL; + + return clk->parent; +} +EXPORT_SYMBOL_GPL(clk_get_parent); diff --git a/arch/arm/plat-tcc/include/mach/clkdev.h b/arch/arm/plat-tcc/include/mach/clkdev.h new file mode 100644 index 000000000000..04b37a89801c --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h new file mode 100644 index 000000000000..a12f58ad71a8 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/clock.h @@ -0,0 +1,48 @@ +/* + * Low level clock header file for Telechips TCC architecture + * (C) 2010 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the GPL v2. + */ + +#ifndef __ASM_ARCH_TCC_CLOCK_H__ +#define __ASM_ARCH_TCC_CLOCK_H__ + +#ifndef __ASSEMBLY__ + +struct clk { + struct clk *parent; + /* id number of a root clock, 0 for normal clocks */ + int root_id; + /* Reference count of clock enable/disable */ + int refcount; + /* Address of associated BCLKCTRx register. Must be set. */ + void __iomem *bclkctr; + /* Bit position for BCLKCTRx. Must be set. */ + int bclk_shift; + /* Address of ACLKxxx register, if any. */ + void __iomem *aclkreg; + /* get the current clock rate (always a fresh value) */ + unsigned long (*get_rate) (struct clk *); + /* Function ptr to set the clock to a new rate. The rate must match a + supported rate returned from round_rate. Leave blank if clock is not + programmable */ + int (*set_rate) (struct clk *, unsigned long); + /* Function ptr to round the requested clock rate to the nearest + supported rate that is less than or equal to the requested rate. */ + unsigned long (*round_rate) (struct clk *, unsigned long); + /* Function ptr to enable the clock. Leave blank if clock can not + be gated. */ + int (*enable) (struct clk *); + /* Function ptr to disable the clock. Leave blank if clock can not + be gated. */ + void (*disable) (struct clk *); + /* Function ptr to set the parent clock of the clock. */ + int (*set_parent) (struct clk *, struct clk *); +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S new file mode 100644 index 000000000000..97537845df64 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/debug-macro.S @@ -0,0 +1,33 @@ +/* + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + .macro addruart,rx,tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x90000000 @ physical base address + movne \rx, #0xF1000000 @ virtual base + orr \rx, \rx, #0x00007000 @ UART0 + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #0x44] + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1001: + ldr \rd, [\rx, #0x14] + tst \rd, #0x20 + + beq 1001b + .endm diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S new file mode 100644 index 000000000000..748f401e4b6d --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/entry-macro.S @@ -0,0 +1,68 @@ +/* + * include/asm-arm/arch-tcc83x/entry-macro.S + * + * Author : <linux@telechips.com> + * Created: June 10, 2008 + * Description: Low-level IRQ helper macros for Telechips-based platforms + * + * Copyright (C) 2008-2009 Telechips + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <mach/irqs.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \base, =0xF2003000 @ base address of PIC registers + + @@ read MREQ register of PIC0 + + mov \irqnr, #0 + ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts + cmp \irqstat, #0 + bne 1001f + + @@ read MREQ register of PIC1 + + ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts + cmp \irqstat, #0 + beq 1002f + mov \irqnr, #0x20 + +1001: + movs \tmp, \irqstat, lsl #16 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #16 + + movs \tmp, \irqstat, lsl #8 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #8 + + movs \tmp, \irqstat, lsl #4 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #4 + + movs \tmp, \irqstat, lsl #2 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #2 + + movs \tmp, \irqstat, lsl #1 + addeq \irqnr, \irqnr, #1 + orrs \base, \base, #1 +1002: + @@ exit here, Z flag unset if IRQ + + .endm diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h new file mode 100644 index 000000000000..e70d126ccaf3 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/hardware.h @@ -0,0 +1,43 @@ +/* + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * Rewritten by: <linux@telechips.com> + * Description: Hardware definitions for TCC8300 processors and boards + * + * Copyright (C) 2001 RidgeRun, Inc. + * Copyright (C) 2008-2009 Telechips + * + * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GNU Pulic License version 2. + */ + +#ifndef __ASM_ARCH_TCC_HARDWARE_H +#define __ASM_ARCH_TCC_HARDWARE_H + +#include <asm/sizes.h> +#ifndef __ASSEMBLER__ +#include <asm/types.h> +#endif +#include <mach/io.h> + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE 0xfffece00 +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +/* DPLL control registers */ +#define DPLL_CTL 0xfffecf00 + +#endif /* __ASM_ARCH_TCC_HARDWARE_H */ diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h new file mode 100644 index 000000000000..3e911d3ea0f1 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/io.h @@ -0,0 +1,23 @@ +/* + * IO definitions for TCC8000 processors and boards + * + * Copyright (C) 1997-1999 Russell King + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GNU Public License version 2. + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h new file mode 100644 index 000000000000..da863894d498 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/irqs.h @@ -0,0 +1,83 @@ +/* + * IRQ definitions for TCC8xxx + * + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2. + * + */ + +#ifndef __ASM_ARCH_TCC_IRQS_H +#define __ASM_ARCH_TCC_IRQS_H + +#define NR_IRQS 64 + +/* PIC0 interrupts */ +#define INT_ADMA1 0 +#define INT_BDMA 1 +#define INT_ADMA0 2 +#define INT_GDMA1 3 +#define INT_I2S0RX 4 +#define INT_I2S0TX 5 +#define INT_TC 6 +#define INT_UART0 7 +#define INT_USBD 8 +#define INT_SPI0TX 9 +#define INT_UDMA 10 +#define INT_LIRQ 11 +#define INT_GDMA2 12 +#define INT_GDMA0 13 +#define INT_TC32 14 +#define INT_LCD 15 +#define INT_ADC 16 +#define INT_I2C 17 +#define INT_RTCP 18 +#define INT_RTCA 19 +#define INT_NFC 20 +#define INT_SD0 21 +#define INT_GSB0 22 +#define INT_PK 23 +#define INT_USBH0 24 +#define INT_USBH1 25 +#define INT_G2D 26 +#define INT_ECC 27 +#define INT_SPI0RX 28 +#define INT_UART1 29 +#define INT_MSCL 30 +#define INT_GSB1 31 +/* PIC1 interrupts */ +#define INT_E0 32 +#define INT_E1 33 +#define INT_E2 34 +#define INT_E3 35 +#define INT_E4 36 +#define INT_E5 37 +#define INT_E6 38 +#define INT_E7 39 +#define INT_UART2 40 +#define INT_UART3 41 +#define INT_SPI1TX 42 +#define INT_SPI1RX 43 +#define INT_GSB2 44 +#define INT_SPDIF 45 +#define INT_CDIF 46 +#define INT_VBON 47 +#define INT_VBOFF 48 +#define INT_SD1 49 +#define INT_UART4 50 +#define INT_GDMA3 51 +#define INT_I2S1RX 52 +#define INT_I2S1TX 53 +#define INT_CAN0 54 +#define INT_CAN1 55 +#define INT_GSB3 56 +#define INT_KRST 57 +#define INT_UNUSED 58 +#define INT_SD0D3 59 +#define INT_SD1D3 60 +#define INT_GPS0 61 +#define INT_GPS1 62 +#define INT_GPS2 63 + +#endif /* ASM_ARCH_TCC_IRQS_H */ diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h new file mode 100644 index 000000000000..cd91ba8a670b --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/memory.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 RidgeRun, Inc. + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x20000000) + +#endif diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h new file mode 100644 index 000000000000..909e6035d843 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/system.h @@ -0,0 +1,31 @@ +/* + * Author: <linux@telechips.com> + * Created: June 10, 2008 + * Description: LINUX SYSTEM FUNCTIONS for TCC83x + * + * Copyright (C) 2008-2009 Telechips + * + * Licensed under the terms of the GPL v2. + * + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H +#include <linux/clk.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> + +extern void plat_tcc_reboot(void); + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + plat_tcc_reboot(); +} + +#endif diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h new file mode 100644 index 000000000000..1d9428295332 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h @@ -0,0 +1,807 @@ +/* + * Telechips TCC8000 register definitions + * + * (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPLv2. + */ + +#ifndef TCC8K_REGS_H +#define TCC8K_REGS_H + +#include <linux/types.h> + +#define EXT_SDRAM_BASE 0x20000000 +#define INT_SRAM_BASE 0x30000000 +#define INT_SRAM_SIZE SZ_32K +#define CS0_BASE 0x40000000 +#define CS1_BASE 0x50000000 +#define CS1_SIZE SZ_64K +#define CS2_BASE 0x60000000 +#define CS3_BASE 0x70000000 +#define AHB_PERI_BASE 0x80000000 +#define AHB_PERI_SIZE SZ_64K +#define APB0_PERI_BASE 0x90000000 +#define APB0_PERI_SIZE SZ_128K +#define APB1_PERI_BASE 0x98000000 +#define APB1_PERI_SIZE SZ_128K +#define DATA_TCM_BASE 0xa0000000 +#define DATA_TCM_SIZE SZ_8K +#define EXT_MEM_CTRL_BASE 0xf0000000 +#define EXT_MEM_CTRL_SIZE SZ_4K + +#define CS1_BASE_VIRT (void __iomem *)0xf7000000 +#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000 +#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000 +#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000 +#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000 +#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000 +#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000 + +#define __REG(x) (*((volatile u32 *)(x))) + +/* USB Device Controller Registers */ +#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000) +#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000) + +#define UDC_IR_OFFS 0x00 +#define UDC_EIR_OFFS 0x04 +#define UDC_EIER_OFFS 0x08 +#define UDC_FAR_OFFS 0x0c +#define UDC_FNR_OFFS 0x10 +#define UDC_EDR_OFFS 0x14 +#define UDC_RT_OFFS 0x18 +#define UDC_SSR_OFFS 0x1c +#define UDC_SCR_OFFS 0x20 +#define UDC_EP0SR_OFFS 0x24 +#define UDC_EP0CR_OFFS 0x28 + +#define UDC_ESR_OFFS 0x2c +#define UDC_ECR_OFFS 0x30 +#define UDC_BRCR_OFFS 0x34 +#define UDC_BWCR_OFFS 0x38 +#define UDC_MPR_OFFS 0x3c +#define UDC_DCR_OFFS 0x40 +#define UDC_DTCR_OFFS 0x44 +#define UDC_DFCR_OFFS 0x48 +#define UDC_DTTCR1_OFFS 0x4c +#define UDC_DTTCR2_OFFS 0x50 +#define UDC_ESR2_OFFS 0x54 + +#define UDC_SCR2_OFFS 0x58 +#define UDC_EP0BUF_OFFS 0x60 +#define UDC_EP1BUF_OFFS 0x64 +#define UDC_EP2BUF_OFFS 0x68 +#define UDC_EP3BUF_OFFS 0x6c +#define UDC_PLICR_OFFS 0xa0 +#define UDC_PCR_OFFS 0xa4 + +#define UDC_UPCR0_OFFS 0xc8 +#define UDC_UPCR1_OFFS 0xcc +#define UDC_UPCR2_OFFS 0xd0 +#define UDC_UPCR3_OFFS 0xd4 + +/* Bits in UDC_EIR */ +#define UDC_EIR_EP0I (1 << 0) +#define UDC_EIR_EP1I (1 << 1) +#define UDC_EIR_EP2I (1 << 2) +#define UDC_EIR_EP3I (1 << 3) +#define UDC_EIR_EPI_MASK 0x0f + +/* Bits in UDC_EIER */ +#define UDC_EIER_EP0IE (1 << 0) +#define UDC_EIER_EP1IE (1 << 1) +#define UDC_EIER_EP2IE (1 << 2) +#define UDC_EIER_EP3IE (1 << 3) + +/* Bits in UDC_FNR */ +#define UDC_FNR_FN_MASK 0x7ff +#define UDC_FNR_SM (1 << 13) +#define UDC_FNR_FTL (1 << 14) + +/* Bits in UDC_SSR */ +#define UDC_SSR_HFRES (1 << 0) +#define UDC_SSR_HFSUSP (1 << 1) +#define UDC_SSR_HFRM (1 << 2) +#define UDC_SSR_SDE (1 << 3) +#define UDC_SSR_HSP (1 << 4) +#define UDC_SSR_DM (1 << 5) +#define UDC_SSR_DP (1 << 6) +#define UDC_SSR_TBM (1 << 7) +#define UDC_SSR_VBON (1 << 8) +#define UDC_SSR_VBOFF (1 << 9) +#define UDC_SSR_EOERR (1 << 10) +#define UDC_SSR_DCERR (1 << 11) +#define UDC_SSR_TCERR (1 << 12) +#define UDC_SSR_BSERR (1 << 13) +#define UDC_SSR_TMERR (1 << 14) +#define UDC_SSR_BAERR (1 << 15) + +/* Bits in UDC_SCR */ +#define UDC_SCR_HRESE (1 << 0) +#define UDC_SCR_HSSPE (1 << 1) +#define UDC_SCR_RRDE (1 << 5) +#define UDC_SCR_SPDEN (1 << 6) +#define UDC_SCR_DIEN (1 << 12) + +/* Bits in UDC_EP0SR */ +#define UDC_EP0SR_RSR (1 << 0) +#define UDC_EP0SR_TST (1 << 1) +#define UDC_EP0SR_SHT (1 << 4) +#define UDC_EP0SR_LWO (1 << 6) + +/* Bits in UDC_EP0CR */ +#define UDC_EP0CR_ESS (1 << 1) + +/* Bits in UDC_ESR */ +#define UDC_ESR_RPS (1 << 0) +#define UDC_ESR_TPS (1 << 1) +#define UDC_ESR_LWO (1 << 4) +#define UDC_ESR_FFS (1 << 6) + +/* Bits in UDC_ECR */ +#define UDC_ECR_ESS (1 << 1) +#define UDC_ECR_CDP (1 << 2) + +#define UDC_ECR_FLUSH (1 << 6) +#define UDC_ECR_DUEN (1 << 7) + +/* Bits in UDC_UPCR0 */ +#define UDC_UPCR0_VBD (1 << 1) +#define UDC_UPCR0_VBDS (1 << 6) +#define UDC_UPCR0_RCD_12 (0x0 << 9) +#define UDC_UPCR0_RCD_24 (0x1 << 9) +#define UDC_UPCR0_RCD_48 (0x2 << 9) +#define UDC_UPCR0_RCS_EXT (0x1 << 11) +#define UDC_UPCR0_RCS_XTAL (0x0 << 11) + +/* Bits in UDC_UPCR1 */ +#define UDC_UPCR1_CDT(x) ((x) << 0) +#define UDC_UPCR1_OTGT(x) ((x) << 3) +#define UDC_UPCR1_SQRXT(x) ((x) << 8) +#define UDC_UPCR1_TXFSLST(x) ((x) << 12) + +/* Bits in UDC_UPCR2 */ +#define UDC_UPCR2_TP (1 << 0) +#define UDC_UPCR2_TXRT(x) ((x) << 2) +#define UDC_UPCR2_TXVRT(x) ((x) << 5) +#define UDC_UPCR2_OPMODE(x) ((x) << 9) +#define UDC_UPCR2_XCVRSEL(x) ((x) << 12) +#define UDC_UPCR2_TM (1 << 14) + +/* USB Host Controller registers */ +#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000) +#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800) + +#define OHCI_INT_ENABLE_OFFS 0x10 + +#define RH_DESCRIPTOR_A_OFFS 0x48 +#define RH_DESCRIPTOR_B_OFFS 0x4c + +#define USBHTCFG0_OFFS 0x100 +#define USBHHCFG0_OFFS 0x104 +#define USBHHCFG1_OFFS 0x104 + +/* DMA controller registers */ +#define DMAC0_BASE (AHB_PERI_BASE + 0x4000) +#define DMAC1_BASE (AHB_PERI_BASE + 0xa000) +#define DMAC2_BASE (AHB_PERI_BASE + 0x4800) +#define DMAC3_BASE (AHB_PERI_BASE + 0xa800) + +#define DMAC_CH_OFFSET(ch) (ch * 0x30) + +#define ST_SADR_OFFS 0x00 +#define SPARAM_OFFS 0x04 +#define C_SADR_OFFS 0x0c +#define ST_DADR_OFFS 0x10 +#define DPARAM_OFFS 0x14 +#define C_DADR_OFFS 0x1c +#define HCOUNT_OFFS 0x20 +#define CHCTRL_OFFS 0x24 +#define RPTCTRL_OFFS 0x28 +#define EXTREQ_A_OFFS 0x2c + +/* Bits in CHCTRL register */ +#define CHCTRL_EN (1 << 0) + +#define CHCTRL_IEN (1 << 2) +#define CHCTRL_FLAG (1 << 3) +#define CHCTRL_WSIZE8 (0 << 4) +#define CHCTRL_WSIZE16 (1 << 4) +#define CHCTRL_WSIZE32 (2 << 4) + +#define CHCTRL_BSIZE1 (0 << 6) +#define CHCTRL_BSIZE2 (1 << 6) +#define CHCTRL_BSIZE4 (2 << 6) +#define CHCTRL_BSIZE8 (3 << 6) + +#define CHCTRL_TYPE_SINGLE_E (0 << 8) +#define CHCTRL_TYPE_HW (1 << 8) +#define CHCTRL_TYPE_SW (2 << 8) +#define CHCTRL_TYPE_SINGLE_L (3 << 8) + +#define CHCTRL_BST (1 << 10) + +/* Use DMA controller 0, channel 2 for USB */ +#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2)) + +/* NAND flash controller registers */ +#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000) +#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000) + +#define NFC_CMD_OFFS 0x00 +#define NFC_LADDR_OFFS 0x04 +#define NFC_BADDR_OFFS 0x08 +#define NFC_SADDR_OFFS 0x0c +#define NFC_WDATA_OFFS 0x10 +#define NFC_LDATA_OFFS 0x20 +#define NFC_SDATA_OFFS 0x40 +#define NFC_CTRL_OFFS 0x50 +#define NFC_PSTART_OFFS 0x54 +#define NFC_RSTART_OFFS 0x58 +#define NFC_DSIZE_OFFS 0x5c +#define NFC_IREQ_OFFS 0x60 +#define NFC_RST_OFFS 0x64 +#define NFC_CTRL1_OFFS 0x68 +#define NFC_MDATA_OFFS 0x70 + +#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS) + +/* Bits in NFC_CTRL */ +#define NFC_CTRL_BHLD_MASK (0xf << 0) +#define NFC_CTRL_BPW_MASK (0xf << 4) +#define NFC_CTRL_BSTP_MASK (0xf << 8) +#define NFC_CTRL_CADDR_MASK (0x7 << 12) +#define NFC_CTRL_CADDR_1 (0x0 << 12) +#define NFC_CTRL_CADDR_2 (0x1 << 12) +#define NFC_CTRL_CADDR_3 (0x2 << 12) +#define NFC_CTRL_CADDR_4 (0x3 << 12) +#define NFC_CTRL_CADDR_5 (0x4 << 12) +#define NFC_CTRL_MSK (1 << 15) +#define NFC_CTRL_PSIZE256 (0 << 16) +#define NFC_CTRL_PSIZE512 (1 << 16) +#define NFC_CTRL_PSIZE1024 (2 << 16) +#define NFC_CTRL_PSIZE2048 (3 << 16) +#define NFC_CTRL_PSIZE4096 (4 << 16) +#define NFC_CTRL_PSIZE_MASK (7 << 16) +#define NFC_CTRL_BSIZE1 (0 << 19) +#define NFC_CTRL_BSIZE2 (1 << 19) +#define NFC_CTRL_BSIZE4 (2 << 19) +#define NFC_CTRL_BSIZE8 (3 << 19) +#define NFC_CTRL_BSIZE_MASK (3 << 19) +#define NFC_CTRL_RDY (1 << 21) +#define NFC_CTRL_CS0SEL (1 << 22) +#define NFC_CTRL_CS1SEL (1 << 23) +#define NFC_CTRL_CS2SEL (1 << 24) +#define NFC_CTRL_CS3SEL (1 << 25) +#define NFC_CTRL_CSMASK (0xf << 22) +#define NFC_CTRL_BW (1 << 26) +#define NFC_CTRL_FS (1 << 27) +#define NFC_CTRL_DEN (1 << 28) +#define NFC_CTRL_READ_IEN (1 << 29) +#define NFC_CTRL_PROG_IEN (1 << 30) +#define NFC_CTRL_RDY_IEN (1 << 31) + +/* Bits in NFC_IREQ */ +#define NFC_IREQ_IRQ0 (1 << 0) +#define NFC_IREQ_IRQ1 (1 << 1) +#define NFC_IREQ_IRQ2 (1 << 2) + +#define NFC_IREQ_FLAG0 (1 << 4) +#define NFC_IREQ_FLAG1 (1 << 5) +#define NFC_IREQ_FLAG2 (1 << 6) + +/* MMC controller registers */ +#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000) +#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800) + +/* UART base addresses */ + +#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000) +#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000) +#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000) +#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000) +#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000) +#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000) +#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000) +#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000) +#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000) +#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000) + +#define UART_BASE UART0_BASE +#define UART_BASE_PHYS UART0_BASE_PHYS + +/* ECC controller */ +#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000) + +#define ECC_CTRL_OFFS 0x00 +#define ECC_BASE_OFFS 0x04 +#define ECC_MASK_OFFS 0x08 +#define ECC_CLEAR_OFFS 0x0c +#define ECC4_0_OFFS 0x10 +#define ECC4_1_OFFS 0x14 + +#define ECC_EADDR0_OFFS 0x50 + +#define ECC_ERRNUM_OFFS 0x90 +#define ECC_IREQ_OFFS 0x94 + +/* Bits in ECC_CTRL */ +#define ECC_CTRL_ECC4_DIEN (1 << 28) +#define ECC_CTRL_ECC8_DIEN (1 << 29) +#define ECC_CTRL_ECC12_DIEN (1 << 30) +#define ECC_CTRL_ECC_DISABLE 0x0 +#define ECC_CTRL_ECC_SLC_ENC 0x8 +#define ECC_CTRL_ECC_SLC_DEC 0x9 +#define ECC_CTRL_ECC4_ENC 0xa +#define ECC_CTRL_ECC4_DEC 0xb +#define ECC_CTRL_ECC8_ENC 0xc +#define ECC_CTRL_ECC8_DEC 0xd +#define ECC_CTRL_ECC12_ENC 0xe +#define ECC_CTRL_ECC12_DEC 0xf + +/* Bits in ECC_IREQ */ +#define ECC_IREQ_E4DI (1 << 4) + +#define ECC_IREQ_E4DF (1 << 20) +#define ECC_IREQ_E4EF (1 << 21) + +/* Interrupt controller */ + +#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000) +#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000) + +#define PIC0_IEN_OFFS 0x00 +#define PIC0_CREQ_OFFS 0x04 +#define PIC0_IREQ_OFFS 0x08 +#define PIC0_IRQSEL_OFFS 0x0c +#define PIC0_SRC_OFFS 0x10 +#define PIC0_MREQ_OFFS 0x14 +#define PIC0_TSTREQ_OFFS 0x18 +#define PIC0_POL_OFFS 0x1c +#define PIC0_IRQ_OFFS 0x20 +#define PIC0_FIQ_OFFS 0x24 +#define PIC0_MIRQ_OFFS 0x28 +#define PIC0_MFIQ_OFFS 0x2c +#define PIC0_TMODE_OFFS 0x30 +#define PIC0_SYNC_OFFS 0x34 +#define PIC0_WKUP_OFFS 0x38 +#define PIC0_TMODEA_OFFS 0x3c +#define PIC0_INTOEN_OFFS 0x40 +#define PIC0_MEN0_OFFS 0x44 +#define PIC0_MEN_OFFS 0x48 + +#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS) +#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS) +#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS) +#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS) +#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS) +#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS) +#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS) +#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS) +#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS) +#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS) +#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS) +#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS) +#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS) +#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS) +#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS) +#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS) +#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS) +#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS) +#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS) +#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS) +#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS) +#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS) +#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS) + +#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080) + +#define PIC1_IEN_OFFS 0x00 +#define PIC1_CREQ_OFFS 0x04 +#define PIC1_IREQ_OFFS 0x08 +#define PIC1_IRQSEL_OFFS 0x0c +#define PIC1_SRC_OFFS 0x10 +#define PIC1_MREQ_OFFS 0x14 +#define PIC1_TSTREQ_OFFS 0x18 +#define PIC1_POL_OFFS 0x1c +#define PIC1_IRQ_OFFS 0x20 +#define PIC1_FIQ_OFFS 0x24 +#define PIC1_MIRQ_OFFS 0x28 +#define PIC1_MFIQ_OFFS 0x2c +#define PIC1_TMODE_OFFS 0x30 +#define PIC1_SYNC_OFFS 0x34 +#define PIC1_WKUP_OFFS 0x38 +#define PIC1_TMODEA_OFFS 0x3c +#define PIC1_INTOEN_OFFS 0x40 +#define PIC1_MEN1_OFFS 0x44 +#define PIC1_MEN_OFFS 0x48 + +#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS) +#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS) +#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS) +#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS) +#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS) +#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS) +#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS) +#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS) +#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS) +#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS) +#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS) +#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS) +#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS) +#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS) +#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS) +#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS) +#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS) +#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS) +#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS) + +/* Timer registers */ +#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000) +#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000) + +#define TWDCFG_OFFS 0x70 + +#define TC32EN_OFFS 0x80 +#define TC32LDV_OFFS 0x84 +#define TC32CMP0_OFFS 0x88 +#define TC32CMP1_OFFS 0x8c +#define TC32PCNT_OFFS 0x90 +#define TC32MCNT_OFFS 0x94 +#define TC32IRQ_OFFS 0x98 + +/* Bits in TC32EN */ +#define TC32EN_PRESCALE_MASK 0x00ffffff +#define TC32EN_ENABLE (1 << 24) +#define TC32EN_LOADZERO (1 << 25) +#define TC32EN_STOPMODE (1 << 26) +#define TC32EN_LDM0 (1 << 28) +#define TC32EN_LDM1 (1 << 29) + +/* Bits in TC32IRQ */ +#define TC32IRQ_MSTAT_MASK 0x0000001f +#define TC32IRQ_RSTAT_MASK (0x1f << 8) +#define TC32IRQ_IRQEN0 (1 << 16) +#define TC32IRQ_IRQEN1 (1 << 17) +#define TC32IRQ_IRQEN2 (1 << 18) +#define TC32IRQ_IRQEN3 (1 << 19) +#define TC32IRQ_IRQEN4 (1 << 20) +#define TC32IRQ_RSYNC (1 << 30) +#define TC32IRQ_IRQCLR (1 << 31) + +/* GPIO registers */ +#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOPD_DAT_OFFS 0x00 +#define GPIOPD_DOE_OFFS 0x04 +#define GPIOPD_FS0_OFFS 0x08 +#define GPIOPD_FS1_OFFS 0x0c +#define GPIOPD_FS2_OFFS 0x10 +#define GPIOPD_RPU_OFFS 0x30 +#define GPIOPD_RPD_OFFS 0x34 +#define GPIOPD_DV0_OFFS 0x38 +#define GPIOPD_DV1_OFFS 0x3c + +#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOPS_DAT_OFFS 0x40 +#define GPIOPS_DOE_OFFS 0x44 +#define GPIOPS_FS0_OFFS 0x48 +#define GPIOPS_FS1_OFFS 0x4c +#define GPIOPS_FS2_OFFS 0x50 +#define GPIOPS_FS3_OFFS 0x54 +#define GPIOPS_RPU_OFFS 0x70 +#define GPIOPS_RPD_OFFS 0x74 +#define GPIOPS_DV0_OFFS 0x78 +#define GPIOPS_DV1_OFFS 0x7c + +#define GPIOPS_FS1_SDH0_BITS 0x000000ff +#define GPIOPS_FS1_SDH1_BITS 0x0000ff00 + +#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOPU_DAT_OFFS 0x80 +#define GPIOPU_DOE_OFFS 0x84 +#define GPIOPU_FS0_OFFS 0x88 +#define GPIOPU_FS1_OFFS 0x8c +#define GPIOPU_FS2_OFFS 0x90 +#define GPIOPU_RPU_OFFS 0xb0 +#define GPIOPU_RPD_OFFS 0xb4 +#define GPIOPU_DV0_OFFS 0xb8 +#define GPIOPU_DV1_OFFS 0xbc + +#define GPIOPU_FS0_TXD0 (1 << 0) +#define GPIOPU_FS0_RXD0 (1 << 1) +#define GPIOPU_FS0_CTS0 (1 << 2) +#define GPIOPU_FS0_RTS0 (1 << 3) +#define GPIOPU_FS0_TXD1 (1 << 4) +#define GPIOPU_FS0_RXD1 (1 << 5) +#define GPIOPU_FS0_CTS1 (1 << 6) +#define GPIOPU_FS0_RTS1 (1 << 7) +#define GPIOPU_FS0_TXD2 (1 << 8) +#define GPIOPU_FS0_RXD2 (1 << 9) +#define GPIOPU_FS0_CTS2 (1 << 10) +#define GPIOPU_FS0_RTS2 (1 << 11) +#define GPIOPU_FS0_TXD3 (1 << 12) +#define GPIOPU_FS0_RXD3 (1 << 13) +#define GPIOPU_FS0_CTS3 (1 << 14) +#define GPIOPU_FS0_RTS3 (1 << 15) +#define GPIOPU_FS0_TXD4 (1 << 16) +#define GPIOPU_FS0_RXD4 (1 << 17) +#define GPIOPU_FS0_CTS4 (1 << 18) +#define GPIOPU_FS0_RTS4 (1 << 19) + +#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOFC_DAT_OFFS 0xc0 +#define GPIOFC_DOE_OFFS 0xc4 +#define GPIOFC_FS0_OFFS 0xc8 +#define GPIOFC_FS1_OFFS 0xcc +#define GPIOFC_FS2_OFFS 0xd0 +#define GPIOFC_FS3_OFFS 0xd4 +#define GPIOFC_RPU_OFFS 0xf0 +#define GPIOFC_RPD_OFFS 0xf4 +#define GPIOFC_DV0_OFFS 0xf8 +#define GPIOFC_DV1_OFFS 0xfc + +#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOFD_DAT_OFFS 0x100 +#define GPIOFD_DOE_OFFS 0x104 +#define GPIOFD_FS0_OFFS 0x108 +#define GPIOFD_FS1_OFFS 0x10c +#define GPIOFD_FS2_OFFS 0x110 +#define GPIOFD_RPU_OFFS 0x130 +#define GPIOFD_RPD_OFFS 0x134 +#define GPIOFD_DV0_OFFS 0x138 +#define GPIOFD_DV1_OFFS 0x13c + +#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOLC_DAT_OFFS 0x140 +#define GPIOLC_DOE_OFFS 0x144 +#define GPIOLC_FS0_OFFS 0x148 +#define GPIOLC_FS1_OFFS 0x14c +#define GPIOLC_RPU_OFFS 0x170 +#define GPIOLC_RPD_OFFS 0x174 +#define GPIOLC_DV0_OFFS 0x178 +#define GPIOLC_DV1_OFFS 0x17c + +#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOLD_DAT_OFFS 0x180 +#define GPIOLD_DOE_OFFS 0x184 +#define GPIOLD_FS0_OFFS 0x188 +#define GPIOLD_FS1_OFFS 0x18c +#define GPIOLD_FS2_OFFS 0x190 +#define GPIOLD_RPU_OFFS 0x1b0 +#define GPIOLD_RPD_OFFS 0x1b4 +#define GPIOLD_DV0_OFFS 0x1b8 +#define GPIOLD_DV1_OFFS 0x1bc + +#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOAD_DAT_OFFS 0x1c0 +#define GPIOAD_DOE_OFFS 0x1c4 +#define GPIOAD_FS0_OFFS 0x1c8 +#define GPIOAD_RPU_OFFS 0x1f0 +#define GPIOAD_RPD_OFFS 0x1f4 +#define GPIOAD_DV0_OFFS 0x1f8 +#define GPIOAD_DV1_OFFS 0x1fc + +#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOXC_DAT_OFFS 0x200 +#define GPIOXC_DOE_OFFS 0x204 +#define GPIOXC_FS0_OFFS 0x208 +#define GPIOXC_RPU_OFFS 0x230 +#define GPIOXC_RPD_OFFS 0x234 +#define GPIOXC_DV0_OFFS 0x238 +#define GPIOXC_DV1_OFFS 0x23c + +#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS) + +#define GPIOXC_FS0_CS0 (1 << 26) +#define GPIOXC_FS0_CS1 (1 << 27) + +#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOXD_DAT_OFFS 0x240 +#define GPIOXD_FS0_OFFS 0x248 +#define GPIOXD_RPU_OFFS 0x270 +#define GPIOXD_RPD_OFFS 0x274 +#define GPIOXD_DV0_OFFS 0x278 +#define GPIOXD_DV1_OFFS 0x27c + +#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000) + +#define GPIOPK_RST_OFFS 0x008 +#define GPIOPK_DAT_OFFS 0x100 +#define GPIOPK_DOE_OFFS 0x104 +#define GPIOPK_FS0_OFFS 0x108 +#define GPIOPK_FS1_OFFS 0x10c +#define GPIOPK_FS2_OFFS 0x110 +#define GPIOPK_IRQST_OFFS 0x210 +#define GPIOPK_IRQEN_OFFS 0x214 +#define GPIOPK_IRQPOL_OFFS 0x218 +#define GPIOPK_IRQTM0_OFFS 0x21c +#define GPIOPK_IRQTM1_OFFS 0x220 +#define GPIOPK_CTL_OFFS 0x22c + +#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000) +#define BACKUP_RAM_BASE PMGPIO_BASE + +#define PMGPIO_DAT_OFFS 0x800 +#define PMGPIO_DOE_OFFS 0x804 +#define PMGPIO_FS0_OFFS 0x808 +#define PMGPIO_RPU_OFFS 0x810 +#define PMGPIO_RPD_OFFS 0x814 +#define PMGPIO_DV0_OFFS 0x818 +#define PMGPIO_DV1_OFFS 0x81c +#define PMGPIO_EE0_OFFS 0x820 +#define PMGPIO_EE1_OFFS 0x824 +#define PMGPIO_CTL_OFFS 0x828 +#define PMGPIO_DI_OFFS 0x82c +#define PMGPIO_STR_OFFS 0x830 +#define PMGPIO_STF_OFFS 0x834 +#define PMGPIO_POL_OFFS 0x838 +#define PMGPIO_APB_OFFS 0x800 + +/* Clock controller registers */ +#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000)) + +#define CLKCTRL_OFFS 0x00 +#define PLL0CFG_OFFS 0x04 +#define PLL1CFG_OFFS 0x08 +#define CLKDIVC0_OFFS 0x0c + +#define BCLKCTR0_OFFS 0x14 +#define SWRESET0_OFFS 0x18 + +#define BCLKCTR1_OFFS 0x60 +#define SWRESET1_OFFS 0x64 +#define PWDCTL_OFFS 0x68 +#define PLL2CFG_OFFS 0x6c +#define CLKDIVC1_OFFS 0x70 + +#define ACLKREF_OFFS 0x80 +#define ACLKI2C_OFFS 0x84 +#define ACLKSPI0_OFFS 0x88 +#define ACLKSPI1_OFFS 0x8c +#define ACLKUART0_OFFS 0x90 +#define ACLKUART1_OFFS 0x94 +#define ACLKUART2_OFFS 0x98 +#define ACLKUART3_OFFS 0x9c +#define ACLKUART4_OFFS 0xa0 +#define ACLKTCT_OFFS 0xa4 +#define ACLKTCX_OFFS 0xa8 +#define ACLKTCZ_OFFS 0xac +#define ACLKADC_OFFS 0xb0 +#define ACLKDAI0_OFFS 0xb4 +#define ACLKDAI1_OFFS 0xb8 +#define ACLKLCD_OFFS 0xbc +#define ACLKSPDIF_OFFS 0xc0 +#define ACLKUSBH_OFFS 0xc4 +#define ACLKSDH0_OFFS 0xc8 +#define ACLKSDH1_OFFS 0xcc +#define ACLKC3DEC_OFFS 0xd0 +#define ACLKEXT_OFFS 0xd4 +#define ACLKCAN0_OFFS 0xd8 +#define ACLKCAN1_OFFS 0xdc +#define ACLKGSB0_OFFS 0xe0 +#define ACLKGSB1_OFFS 0xe4 +#define ACLKGSB2_OFFS 0xe8 +#define ACLKGSB3_OFFS 0xec + +#define PLLxCFG_PD (1 << 31) + +/* CLKCTRL bits */ +#define CLKCTRL_XE (1 << 31) + +/* CLKDIVCx bits */ +#define CLKDIVC0_XTE (1 << 7) +#define CLKDIVC0_XE (1 << 15) +#define CLKDIVC0_P1E (1 << 23) +#define CLKDIVC0_P0E (1 << 31) + +#define CLKDIVC1_P2E (1 << 7) + +/* BCLKCTR0 clock bits */ +#define BCLKCTR0_USBD (1 << 4) +#define BCLKCTR0_ECC (1 << 9) +#define BCLKCTR0_USBH0 (1 << 11) +#define BCLKCTR0_NFC (1 << 16) + +/* BCLKCTR1 clock bits */ +#define BCLKCTR1_USBH1 (1 << 20) + +/* SWRESET0 bits */ +#define SWRESET0_USBD (1 << 4) +#define SWRESET0_USBH0 (1 << 11) + +/* SWRESET1 bits */ +#define SWRESET1_USBH1 (1 << 20) + +/* System clock sources. + * Note: These are the clock sources that serve as parents for + * all other clocks. They have no parents themselves. + * + * These values are used for struct clk->root_id. All clocks + * that are not system clock sources have this value set to + * CLK_SRC_NOROOT. + * The values for system clocks start with CLK_SRC_PLL0 == 0 + * because this gives us exactly the values needed for the lower + * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is + * defined as -1 to not disturb the order. + */ +enum root_clks { + CLK_SRC_NOROOT = -1, + CLK_SRC_PLL0 = 0, + CLK_SRC_PLL1, + CLK_SRC_PLL0DIV, + CLK_SRC_PLL1DIV, + CLK_SRC_XI, + CLK_SRC_XIDIV, + CLK_SRC_XTI, + CLK_SRC_XTIDIV, + CLK_SRC_PLL2, + CLK_SRC_PLL2DIV, + CLK_SRC_PK0, + CLK_SRC_PK1, + CLK_SRC_PK2, + CLK_SRC_PK3, + CLK_SRC_PK4, + CLK_SRC_48MHZ +}; + +#define CLK_SRC_MASK 0xf + +/* Bits in ACLK* registers */ +#define ACLK_EN (1 << 28) +#define ACLK_SEL_SHIFT 24 +#define ACLK_SEL_MASK 0x0f000000 +#define ACLK_DIV_MASK 0x00000fff + +/* System configuration registers */ + +#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000) + +#define BMI_OFFS 0x00 +#define AHBCON0_OFFS 0x04 +#define APBPWE_OFFS 0x08 +#define DTCMWAIT_OFFS 0x0c +#define ECCSEL_OFFS 0x10 +#define AHBCON1_OFFS 0x14 +#define SDHCFG_OFFS 0x18 +#define REMAP_OFFS 0x20 +#define LCDSIAE_OFFS 0x24 +#define XMCCFG_OFFS 0xe0 +#define IMCCFG_OFFS 0xe4 + +/* Values for ECCSEL */ +#define ECCSEL_EXTMEM 0x0 +#define ECCSEL_DTCM 0x1 +#define ECCSEL_INT_SRAM 0x2 +#define ECCSEL_AHB 0x3 + +/* Bits in XMCCFG */ +#define XMCCFG_NFCE (1 << 1) +#define XMCCFG_FDXD (1 << 2) + +/* External memory controller registers */ + +#define EMC_BASE EXT_MEM_CTRL_BASE + +#define SDCFG_OFFS 0x00 +#define SDFSM_OFFS 0x04 +#define MCFG_OFFS 0x08 + +#define CSCFG0_OFFS 0x10 +#define CSCFG1_OFFS 0x14 +#define CSCFG2_OFFS 0x18 +#define CSCFG3_OFFS 0x1c + +#define MCFG_SDEN (1 << 4) + +#endif /* TCC8K_REGS_H */ diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h new file mode 100644 index 000000000000..057acbe651d9 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/timex.h @@ -0,0 +1,5 @@ +/* + * A definition needed by arch core code. + * + */ +#define CLOCK_TICK_RATE (HZ * 100000UL) diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h new file mode 100644 index 000000000000..7a3e33a27a30 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/uncompress.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * This file is licensed under the terms of the GPL version 2. + */ + +#include <linux/serial_reg.h> +#include <linux/types.h> + +#include <mach/tcc8k-regs.h> + +unsigned int system_rev; + +#define ID_MASK 0x7fff + +static void putc(int c) +{ + u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2)); + u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2)); + + while (!(*uart_lsr & UART_LSR_THRE)) + barrier(); + *uart_tx = c; +} + +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h new file mode 100644 index 000000000000..99414d9c2b94 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/vmalloc.h @@ -0,0 +1,10 @@ +/* + * Author: <linux@telechips.com> + * Created: June 10, 2008 + * + * Copyright (C) 2000 Russell King. + * Copyright (C) 2008-2009 Telechips + * + * Licensed under the terms of the GPL v2. + */ +#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c new file mode 100644 index 000000000000..cc208fae3e7a --- /dev/null +++ b/arch/arm/plat-tcc/system.c @@ -0,0 +1,25 @@ +/* + * System functions for Telechips TCCxxxx SoCs + * + * Copyright (C) Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2. + * + */ + +#include <linux/io.h> + +#include <mach/tcc8k-regs.h> + +/* System reboot */ +void plat_tcc_reboot(void) +{ + /* Make sure clocks are on */ + __raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS); + + /* Enable watchdog reset */ + __raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS); + /* Wait for reset */ + while(1) + ; +} diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c index 98f94d041d9c..a727f54d64d6 100644 --- a/arch/avr32/kernel/module.c +++ b/arch/avr32/kernel/module.c @@ -314,10 +314,9 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, vfree(module->arch.syminfo); module->arch.syminfo = NULL; - return module_bug_finalize(hdr, sechdrs, module); + return 0; } void module_arch_cleanup(struct module *module) { - module_bug_cleanup(module); } diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c index 0865e291c20d..db4953dc4e1b 100644 --- a/arch/h8300/kernel/module.c +++ b/arch/h8300/kernel/module.c @@ -112,10 +112,9 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - return module_bug_finalize(hdr, sechdrs, me); + return 0; } void module_arch_cleanup(struct module *mod) { - module_bug_cleanup(mod); } diff --git a/arch/m68k/mac/macboing.c b/arch/m68k/mac/macboing.c index 8f0640847ad2..05285d08e547 100644 --- a/arch/m68k/mac/macboing.c +++ b/arch/m68k/mac/macboing.c @@ -162,7 +162,7 @@ static void mac_init_asc( void ) void mac_mksound( unsigned int freq, unsigned int length ) { __u32 cfreq = ( freq << 5 ) / 468; - __u32 flags; + unsigned long flags; int i; if ( mac_special_bell == NULL ) @@ -224,7 +224,7 @@ static void mac_nosound( unsigned long ignored ) */ static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsigned int volume ) { - __u32 flags; + unsigned long flags; /* if the bell is already ringing, ring longer */ if ( mac_bell_duration > 0 ) @@ -271,7 +271,7 @@ static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsig static void mac_quadra_ring_bell( unsigned long ignored ) { int i, count = mac_asc_samplespersec / HZ; - __u32 flags; + unsigned long flags; /* * we neither want a sound buffer overflow nor underflow, so we need to match diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3ad59dde4852..5526faabfc21 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -13,6 +13,7 @@ config MIPS select HAVE_KPROBES select HAVE_KRETPROBES select RTC_LIB if !MACH_LOONGSON + select GENERIC_ATOMIC64 if !64BIT mainmenu "Linux/MIPS Kernel Configuration" @@ -1646,8 +1647,16 @@ config MIPS_MT_SMP select SYS_SUPPORTS_SMP select SMP_UP help - This is a kernel model which is also known a VSMP or lately - has been marketesed into SMVP. + This is a kernel model which is known a VSMP but lately has been + marketesed into SMVP. + Virtual SMP uses the processor's VPEs to implement virtual + processors. In currently available configuration of the 34K processor + this allows for a dual processor. Both processors will share the same + primary caches; each will obtain the half of the TLB for it's own + exclusive use. For a layman this model can be described as similar to + what Intel calls Hyperthreading. + + For further information see http://www.linux-mips.org/wiki/34K#VSMP config MIPS_MT_SMTC bool "SMTC: Use all TCs on all VPEs for SMP" @@ -1664,6 +1673,14 @@ config MIPS_MT_SMTC help This is a kernel model which is known a SMTC or lately has been marketesed into SMVP. + is presenting the available TC's of the core as processors to Linux. + On currently available 34K processors this means a Linux system will + see up to 5 processors. The implementation of the SMTC kernel differs + significantly from VSMP and cannot efficiently coexist in the same + kernel binary so the choice between VSMP and SMTC is a compile time + decision. + + For further information see http://www.linux-mips.org/wiki/34K#SMTC endchoice diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c index c29511b11d44..534021059629 100644 --- a/arch/mips/alchemy/common/prom.c +++ b/arch/mips/alchemy/common/prom.c @@ -43,7 +43,7 @@ int prom_argc; char **prom_argv; char **prom_envp; -void prom_init_cmdline(void) +void __init prom_init_cmdline(void) { int i; @@ -104,7 +104,7 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str) } } -int prom_get_ethernet_addr(char *ethernet_addr) +int __init prom_get_ethernet_addr(char *ethernet_addr) { char *ethaddr_str; @@ -123,7 +123,6 @@ int prom_get_ethernet_addr(char *ethernet_addr) return 0; } -EXPORT_SYMBOL(prom_get_ethernet_addr); void __init prom_free_prom_memory(void) { diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index ed9bb709c9a3..5fd7f7a58b7e 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -59,7 +59,7 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE hostprogs-y := calc_vmlinuz_load_addr VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \ - $(objtree)/$(KBUILD_IMAGE) $(VMLINUX_LOAD_ADDRESS)) + $(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS)) vmlinuzobjs-y += $(obj)/piggy.o diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index 094c17e38e16..47323ca452dc 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -83,3 +83,7 @@ config ARCH_SPARSEMEM_ENABLE def_bool y select SPARSEMEM_STATIC depends on CPU_CAVIUM_OCTEON + +config CAVIUM_OCTEON_HELPER + def_bool y + depends on OCTEON_ETHERNET || PCI diff --git a/arch/mips/cavium-octeon/cpu.c b/arch/mips/cavium-octeon/cpu.c index c664c8cc2b42..a5b427909b5c 100644 --- a/arch/mips/cavium-octeon/cpu.c +++ b/arch/mips/cavium-octeon/cpu.c @@ -41,7 +41,7 @@ static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action, return NOTIFY_OK; /* Let default notifier send signals */ } -static int cnmips_cu2_setup(void) +static int __init cnmips_cu2_setup(void) { return cu2_notifier(cnmips_cu2_call, 0); } diff --git a/arch/mips/cavium-octeon/executive/Makefile b/arch/mips/cavium-octeon/executive/Makefile index 2fd66db6939e..7f41c5be2190 100644 --- a/arch/mips/cavium-octeon/executive/Makefile +++ b/arch/mips/cavium-octeon/executive/Makefile @@ -11,4 +11,4 @@ obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o -obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-jtag.o +obj-$(CONFIG_CAVIUM_OCTEON_HELPER) += cvmx-helper-errata.o cvmx-helper-jtag.o diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index c63c56bfd184..47d87da379f9 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -782,6 +782,10 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) */ #define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0) +#else /* !CONFIG_64BIT */ + +#include <asm-generic/atomic64.h> + #endif /* CONFIG_64BIT */ /* diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h index 2cb2f0c2c4f8..3532e2c5f098 100644 --- a/arch/mips/include/asm/cop2.h +++ b/arch/mips/include/asm/cop2.h @@ -24,7 +24,7 @@ extern int cu2_notifier_call_chain(unsigned long val, void *v); #define cu2_notifier(fn, pri) \ ({ \ - static struct notifier_block fn##_nb __cpuinitdata = { \ + static struct notifier_block fn##_nb = { \ .notifier_call = fn, \ .priority = pri \ }; \ diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 9b9436a4d816..86548da650e7 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -321,6 +321,7 @@ struct gic_intrmask_regs { */ struct gic_intr_map { unsigned int cpunum; /* Directed to this CPU */ +#define GIC_UNUSED 0xdead /* Dummy data */ unsigned int pin; /* Directed to this Pin */ unsigned int polarity; /* Polarity : +/- */ unsigned int trigtype; /* Trigger : Edge/Levl */ diff --git a/arch/mips/include/asm/mach-tx49xx/kmalloc.h b/arch/mips/include/asm/mach-tx49xx/kmalloc.h index b74caf65482b..ff9a8b86cb93 100644 --- a/arch/mips/include/asm/mach-tx49xx/kmalloc.h +++ b/arch/mips/include/asm/mach-tx49xx/kmalloc.h @@ -1,6 +1,6 @@ #ifndef __ASM_MACH_TX49XX_KMALLOC_H #define __ASM_MACH_TX49XX_KMALLOC_H -#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES +#define ARCH_DMA_MINALIGN L1_CACHE_BYTES #endif /* __ASM_MACH_TX49XX_KMALLOC_H */ diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h index cea872fc6f5c..d11aa02a956a 100644 --- a/arch/mips/include/asm/mips-boards/maltaint.h +++ b/arch/mips/include/asm/mips-boards/maltaint.h @@ -88,9 +88,6 @@ #define GIC_EXT_INTR(x) x -/* Dummy data */ -#define X 0xdead - /* External Interrupts used for IPI */ #define GIC_IPI_EXT_INTR_RESCHED_VPE0 16 #define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17 diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index a16beafcea91..e59cd1ac09c2 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -150,6 +150,20 @@ typedef struct { unsigned long pgprot; } pgprot_t; ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET) #endif #define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET)) + +/* + * RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad + * (lmo) rsp. 8431fd094d625b94d364fe393076ccef88e6ce18 (kernel.org). The + * discussion can be found in lkml posting + * <a2ebde260608230500o3407b108hc03debb9da6e62c@mail.gmail.com> which is + * archived at http://lists.linuxcoding.com/kernel/2006-q3/msg17360.html + * + * It is unclear if the misscompilations mentioned in + * http://lkml.org/lkml/2010/8/8/138 also affect MIPS so we keep this one + * until GCC 3.x has been retired before we can apply + * https://patchwork.linux-mips.org/patch/1541/ + */ + #define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0)) #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 2376f2e06e47..70df9c0d3c5b 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -146,7 +146,8 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH) /* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP) +#define _TIF_WORK_MASK (0x0000ffef & \ + ~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT)) /* work to do on any return to u-space */ #define _TIF_ALLWORK_MASK (0x8000ffff & ~_TIF_SECCOMP) diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index baa318a59c97..550725b881d5 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -356,16 +356,19 @@ #define __NR_perf_event_open (__NR_Linux + 333) #define __NR_accept4 (__NR_Linux + 334) #define __NR_recvmmsg (__NR_Linux + 335) +#define __NR_fanotify_init (__NR_Linux + 336) +#define __NR_fanotify_mark (__NR_Linux + 337) +#define __NR_prlimit64 (__NR_Linux + 338) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 335 +#define __NR_Linux_syscalls 338 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 335 +#define __NR_O32_Linux_syscalls 338 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -668,16 +671,19 @@ #define __NR_perf_event_open (__NR_Linux + 292) #define __NR_accept4 (__NR_Linux + 293) #define __NR_recvmmsg (__NR_Linux + 294) +#define __NR_fanotify_init (__NR_Linux + 295) +#define __NR_fanotify_mark (__NR_Linux + 296) +#define __NR_prlimit64 (__NR_Linux + 297) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 294 +#define __NR_Linux_syscalls 297 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 294 +#define __NR_64_Linux_syscalls 297 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -985,16 +991,19 @@ #define __NR_accept4 (__NR_Linux + 297) #define __NR_recvmmsg (__NR_Linux + 298) #define __NR_getdents64 (__NR_Linux + 299) +#define __NR_fanotify_init (__NR_Linux + 300) +#define __NR_fanotify_mark (__NR_Linux + 301) +#define __NR_prlimit64 (__NR_Linux + 302) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 299 +#define __NR_Linux_syscalls 302 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 299 +#define __NR_N32_Linux_syscalls 302 #ifdef __KERNEL__ diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index b181f2f0ea8e..82ba9f62f49e 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -7,7 +7,6 @@ #include <asm/io.h> #include <asm/gic.h> #include <asm/gcmpregs.h> -#include <asm/mips-boards/maltaint.h> #include <asm/irq.h> #include <linux/hardirq.h> #include <asm-generic/bitops/find.h> @@ -131,7 +130,7 @@ static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) int i; irq -= _irqbase; - pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq); + pr_debug("%s(%d) called\n", __func__, irq); cpumask_and(&tmp, cpumask, cpu_online_mask); if (cpus_empty(tmp)) return -1; @@ -222,7 +221,7 @@ static void __init gic_basic_init(int numintrs, int numvpes, /* Setup specifics */ for (i = 0; i < mapsize; i++) { cpu = intrmap[i].cpunum; - if (cpu == X) + if (cpu == GIC_UNUSED) continue; if (cpu == 0 && i != 0 && intrmap[i].flags == 0) continue; diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 1f4e2fa64140..f4546e97c60d 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -283,7 +283,7 @@ static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd, struct pt_regs *regs = args->regs; int trap = (regs->cp0_cause & 0x7c) >> 2; - /* Userpace events, ignore. */ + /* Userspace events, ignore. */ if (user_mode(regs)) return NOTIFY_DONE; diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index 80e2ba694bab..29811f043399 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -251,7 +251,7 @@ void sp_work_handle_request(void) memset(&tz, 0, sizeof(tz)); if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv, (int)&tz, 0, 0)) == 0) - ret.retval = tv.tv_sec; + ret.retval = tv.tv_sec; break; case MTSP_SYSCALL_EXIT: diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index c2dab140dc98..6343b4a5b835 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -341,3 +341,10 @@ asmlinkage long sys32_lookup_dcookie(u32 a0, u32 a1, char __user *buf, { return sys_lookup_dcookie(merge_64(a0, a1), buf, len); } + +SYSCALL_DEFINE6(32_fanotify_mark, int, fanotify_fd, unsigned int, flags, + u64, a3, u64, a4, int, dfd, const char __user *, pathname) +{ + return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4), + dfd, pathname); +} diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 17202bbe843f..584415eef8c9 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -583,7 +583,10 @@ einval: li v0, -ENOSYS sys sys_rt_tgsigqueueinfo 4 sys sys_perf_event_open 5 sys sys_accept4 4 - sys sys_recvmmsg 5 + sys sys_recvmmsg 5 /* 4335 */ + sys sys_fanotify_init 2 + sys sys_fanotify_mark 6 + sys sys_prlimit64 4 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index a8a6c596eb04..5573f8e4e326 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -416,9 +416,12 @@ sys_call_table: PTR sys_pipe2 PTR sys_inotify_init1 PTR sys_preadv - PTR sys_pwritev /* 5390 */ + PTR sys_pwritev /* 5290 */ PTR sys_rt_tgsigqueueinfo PTR sys_perf_event_open PTR sys_accept4 - PTR sys_recvmmsg + PTR sys_recvmmsg + PTR sys_fanotify_init /* 5295 */ + PTR sys_fanotify_mark + PTR sys_prlimit64 .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index a3d66137731a..1e38ec97672e 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -419,5 +419,8 @@ EXPORT(sysn32_call_table) PTR sys_perf_event_open PTR sys_accept4 PTR compat_sys_recvmmsg - PTR sys_getdents + PTR sys_getdents64 + PTR sys_fanotify_init /* 6300 */ + PTR sys_fanotify_mark + PTR sys_prlimit64 .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 813689ef2384..171979fc98e5 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -538,5 +538,8 @@ sys_call_table: PTR compat_sys_rt_tgsigqueueinfo PTR sys_perf_event_open PTR sys_accept4 - PTR compat_sys_recvmmsg + PTR compat_sys_recvmmsg /* 4335 */ + PTR sys_fanotify_init + PTR sys_32_fanotify_mark + PTR sys_prlimit64 .size sys_call_table,.-sys_call_table diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 7ba890860d98..469d4019f795 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -44,27 +44,39 @@ static inline int cpu_is_noncoherent_r10000(struct device *dev) static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp) { + gfp_t dma_flag; + /* ignore region specifiers */ gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM); -#ifdef CONFIG_ZONE_DMA +#ifdef CONFIG_ISA if (dev == NULL) - gfp |= __GFP_DMA; - else if (dev->coherent_dma_mask < DMA_BIT_MASK(24)) - gfp |= __GFP_DMA; + dma_flag = __GFP_DMA; else #endif -#ifdef CONFIG_ZONE_DMA32 +#if defined(CONFIG_ZONE_DMA32) && defined(CONFIG_ZONE_DMA) if (dev->coherent_dma_mask < DMA_BIT_MASK(32)) - gfp |= __GFP_DMA32; + dma_flag = __GFP_DMA; + else if (dev->coherent_dma_mask < DMA_BIT_MASK(64)) + dma_flag = __GFP_DMA32; + else +#endif +#if defined(CONFIG_ZONE_DMA32) && !defined(CONFIG_ZONE_DMA) + if (dev->coherent_dma_mask < DMA_BIT_MASK(64)) + dma_flag = __GFP_DMA32; + else +#endif +#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32) + if (dev->coherent_dma_mask < DMA_BIT_MASK(64)) + dma_flag = __GFP_DMA; else #endif - ; + dma_flag = 0; /* Don't invoke OOM killer */ gfp |= __GFP_NORETRY; - return gfp; + return gfp | dma_flag; } void *dma_alloc_noncoherent(struct device *dev, size_t size, diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c index 1ef75cd80a0d..274af3be1442 100644 --- a/arch/mips/mm/sc-rm7k.c +++ b/arch/mips/mm/sc-rm7k.c @@ -30,7 +30,7 @@ #define tc_lsize 32 extern unsigned long icache_way_size, dcache_way_size; -unsigned long tcache_size; +static unsigned long tcache_size; #include <asm/r4kcache.h> diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 15949b0be811..b79b24afe3a2 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -385,6 +385,8 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); */ #define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK +#define X GIC_UNUSED + static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { { X, X, X, X, 0 }, { X, X, X, X, 0 }, @@ -404,6 +406,7 @@ static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { { X, X, X, X, 0 }, /* The remainder of this table is initialised by fill_ipi_map */ }; +#undef X /* * GCMP needs to be detected before any SMP initialisation diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c index 71f7d27b0d4c..f31218e17d3c 100644 --- a/arch/mips/pci/pci-rc32434.c +++ b/arch/mips/pci/pci-rc32434.c @@ -118,7 +118,7 @@ static int __init rc32434_pcibridge_init(void) if (!((pcicvalue == PCIM_H_EA) || (pcicvalue == PCIM_H_IA_FIX) || (pcicvalue == PCIM_H_IA_RR))) { - pr_err(KERN_ERR "PCI init error!!!\n"); + pr_err("PCI init error!!!\n"); /* Not in Host Mode, return ERROR */ return -1; } diff --git a/arch/mips/pnx8550/common/reset.c b/arch/mips/pnx8550/common/reset.c index fadd8744a6bc..e7a12ff304b9 100644 --- a/arch/mips/pnx8550/common/reset.c +++ b/arch/mips/pnx8550/common/reset.c @@ -22,29 +22,19 @@ */ #include <linux/kernel.h> +#include <asm/processor.h> #include <asm/reboot.h> #include <glb.h> void pnx8550_machine_restart(char *command) { - char head[] = "************* Machine restart *************"; - char foot[] = "*******************************************"; - - printk("\n\n"); - printk("%s\n", head); - if (command != NULL) - printk("* %s\n", command); - printk("%s\n", foot); - PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST; } void pnx8550_machine_halt(void) { - printk("*** Machine halt. (Not implemented) ***\n"); -} - -void pnx8550_machine_power_off(void) -{ - printk("*** Machine power off. (Not implemented) ***\n"); + while (1) { + if (cpu_wait) + cpu_wait(); + } } diff --git a/arch/mips/pnx8550/common/setup.c b/arch/mips/pnx8550/common/setup.c index 64246c9c875c..43cb3945fdbf 100644 --- a/arch/mips/pnx8550/common/setup.c +++ b/arch/mips/pnx8550/common/setup.c @@ -44,7 +44,6 @@ extern void __init board_setup(void); extern void pnx8550_machine_restart(char *); extern void pnx8550_machine_halt(void); -extern void pnx8550_machine_power_off(void); extern struct resource ioport_resource; extern struct resource iomem_resource; extern char *prom_getcmdline(void); @@ -100,7 +99,7 @@ void __init plat_mem_setup(void) _machine_restart = pnx8550_machine_restart; _machine_halt = pnx8550_machine_halt; - pm_power_off = pnx8550_machine_power_off; + pm_power_off = pnx8550_machine_halt; /* Clear the Global 2 Register, PCI Inta Output Enable Registers Bit 1:Enable DAC Powerdown diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c index 6aea7fd76993..196a111e2e29 100644 --- a/arch/mn10300/kernel/module.c +++ b/arch/mn10300/kernel/module.c @@ -206,7 +206,7 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - return module_bug_finalize(hdr, sechdrs, me); + return 0; } /* @@ -214,5 +214,4 @@ int module_finalize(const Elf_Ehdr *hdr, */ void module_arch_cleanup(struct module *mod) { - module_bug_cleanup(mod); } diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c index 1b76719ec1c3..9261217e8d2c 100644 --- a/arch/mn10300/mm/cache.c +++ b/arch/mn10300/mm/cache.c @@ -54,13 +54,30 @@ EXPORT_SYMBOL(flush_icache_page); void flush_icache_range(unsigned long start, unsigned long end) { #ifdef CONFIG_MN10300_CACHE_WBACK - unsigned long addr, size, off; + unsigned long addr, size, base, off; struct page *page; pgd_t *pgd; pud_t *pud; pmd_t *pmd; pte_t *ppte, pte; + if (end > 0x80000000UL) { + /* addresses above 0xa0000000 do not go through the cache */ + if (end > 0xa0000000UL) { + end = 0xa0000000UL; + if (start >= end) + return; + } + + /* kernel addresses between 0x80000000 and 0x9fffffff do not + * require page tables, so we just map such addresses directly */ + base = (start >= 0x80000000UL) ? start : 0x80000000UL; + mn10300_dcache_flush_range(base, end); + if (base == start) + goto invalidate; + end = base; + } + for (; start < end; start += size) { /* work out how much of the page to flush */ off = start & (PAGE_SIZE - 1); @@ -104,6 +121,7 @@ void flush_icache_range(unsigned long start, unsigned long end) } #endif +invalidate: mn10300_icache_inv(); } EXPORT_SYMBOL(flush_icache_range); diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c index 159a2b81e90c..6e81bb596e5b 100644 --- a/arch/parisc/kernel/module.c +++ b/arch/parisc/kernel/module.c @@ -941,11 +941,10 @@ int module_finalize(const Elf_Ehdr *hdr, nsyms = newptr - (Elf_Sym *)symhdr->sh_addr; DEBUGP("NEW num_symtab %lu\n", nsyms); symhdr->sh_size = nsyms * sizeof(Elf_Sym); - return module_bug_finalize(hdr, sechdrs, me); + return 0; } void module_arch_cleanup(struct module *mod) { deregister_unwind_table(mod); - module_bug_cleanup(mod); } diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c index 477c663e0140..49cee9df225b 100644 --- a/arch/powerpc/kernel/module.c +++ b/arch/powerpc/kernel/module.c @@ -63,11 +63,6 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { const Elf_Shdr *sect; - int err; - - err = module_bug_finalize(hdr, sechdrs, me); - if (err) - return err; /* Apply feature fixups */ sect = find_section(hdr, sechdrs, "__ftr_fixup"); @@ -101,5 +96,4 @@ int module_finalize(const Elf_Ehdr *hdr, void module_arch_cleanup(struct module *mod) { - module_bug_cleanup(mod); } diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index 5b243bd3eb3b..3dc2a8d262b8 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -57,7 +57,7 @@ static struct clk *mpc5121_clk_get(struct device *dev, const char *id) int id_match = 0; if (dev == NULL || id == NULL) - return NULL; + return clk; mutex_lock(&clocks_mutex); list_for_each_entry(p, &clocks, node) { diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c index 45c0cb9b67e6..18c104820198 100644 --- a/arch/powerpc/platforms/52xx/efika.c +++ b/arch/powerpc/platforms/52xx/efika.c @@ -99,7 +99,7 @@ static void __init efika_pcisetup(void) if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING EFIKA_PLATFORM_NAME ": Can't get bus-range for %s\n", pcictrl->full_name); - return; + goto out_put; } if (bus_range[1] == bus_range[0]) @@ -111,12 +111,12 @@ static void __init efika_pcisetup(void) printk(" controlled by %s\n", pcictrl->full_name); printk("\n"); - hose = pcibios_alloc_controller(of_node_get(pcictrl)); + hose = pcibios_alloc_controller(pcictrl); if (!hose) { printk(KERN_WARNING EFIKA_PLATFORM_NAME ": Can't allocate PCI controller structure for %s\n", pcictrl->full_name); - return; + goto out_put; } hose->first_busno = bus_range[0]; @@ -124,6 +124,9 @@ static void __init efika_pcisetup(void) hose->ops = &rtas_pci_ops; pci_process_bridge_OF_ranges(hose, pcictrl, 0); + return; +out_put: + of_node_put(pcictrl); } #else diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 6e905314ad5d..41f3a7eda1de 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -325,12 +325,16 @@ int mpc5200_psc_ac97_gpio_reset(int psc_number) clrbits32(&simple_gpio->simple_dvo, sync | out); clrbits8(&wkup_gpio->wkup_dvo, reset); - /* wait at lease 1 us */ - udelay(2); + /* wait for 1 us */ + udelay(1); /* Deassert reset */ setbits8(&wkup_gpio->wkup_dvo, reset); + /* wait at least 200ns */ + /* 7 ~= (200ns * timebase) / ns2sec */ + __delay(7); + /* Restore pin-muxing */ out_be32(&simple_gpio->port_config, mux); diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c index 22cfd634c355..f7167ee4604c 100644 --- a/arch/s390/kernel/module.c +++ b/arch/s390/kernel/module.c @@ -407,10 +407,9 @@ int module_finalize(const Elf_Ehdr *hdr, { vfree(me->arch.syminfo); me->arch.syminfo = NULL; - return module_bug_finalize(hdr, sechdrs, me); + return 0; } void module_arch_cleanup(struct module *mod) { - module_bug_cleanup(mod); } diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index 43adddfe4c04..ae0be697a89e 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -149,13 +149,11 @@ int module_finalize(const Elf_Ehdr *hdr, int ret = 0; ret |= module_dwarf_finalize(hdr, sechdrs, me); - ret |= module_bug_finalize(hdr, sechdrs, me); return ret; } void module_arch_cleanup(struct module *mod) { - module_bug_cleanup(mod); module_dwarf_cleanup(mod); } diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 2ab233ba32c1..47d0c37897d5 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -255,18 +255,6 @@ static void uml_net_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } -static int uml_net_set_mac(struct net_device *dev, void *addr) -{ - struct uml_net_private *lp = netdev_priv(dev); - struct sockaddr *hwaddr = addr; - - spin_lock_irq(&lp->lock); - eth_mac_addr(dev, hwaddr->sa_data); - spin_unlock_irq(&lp->lock); - - return 0; -} - static int uml_net_change_mtu(struct net_device *dev, int new_mtu) { dev->mtu = new_mtu; @@ -373,7 +361,7 @@ static const struct net_device_ops uml_netdev_ops = { .ndo_start_xmit = uml_net_start_xmit, .ndo_set_multicast_list = uml_net_set_multicast_list, .ndo_tx_timeout = uml_net_tx_timeout, - .ndo_set_mac_address = uml_net_set_mac, + .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = uml_net_change_mtu, .ndo_validate_addr = eth_validate_addr, }; @@ -472,7 +460,8 @@ static void eth_configure(int n, void *init, char *mac, ((*transport->user->init)(&lp->user, dev) != 0)) goto out_unregister; - eth_mac_addr(dev, device->mac); + /* don't use eth_mac_addr, it will not work here */ + memcpy(dev->dev_addr, device->mac, ETH_ALEN); dev->mtu = transport->user->mtu; dev->netdev_ops = ¨_netdev_ops; dev->ethtool_ops = ¨_net_ethtool_ops; diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index fb7a5f052e2b..fb16f17e59be 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -61,7 +61,7 @@ struct cstate_entry { unsigned int ecx; } states[ACPI_PROCESSOR_MAX_POWER]; }; -static struct cstate_entry *cpu_cstate_entry; /* per CPU ptr */ +static struct cstate_entry __percpu *cpu_cstate_entry; /* per CPU ptr */ static short mwait_supported[ACPI_PROCESSOR_MAX_POWER]; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index f1efebaf5510..5c5b8f3dddb5 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -306,14 +306,19 @@ void arch_init_copy_chip_data(struct irq_desc *old_desc, old_cfg = old_desc->chip_data; - memcpy(cfg, old_cfg, sizeof(struct irq_cfg)); + cfg->vector = old_cfg->vector; + cfg->move_in_progress = old_cfg->move_in_progress; + cpumask_copy(cfg->domain, old_cfg->domain); + cpumask_copy(cfg->old_domain, old_cfg->old_domain); init_copy_irq_2_pin(old_cfg, cfg, node); } -static void free_irq_cfg(struct irq_cfg *old_cfg) +static void free_irq_cfg(struct irq_cfg *cfg) { - kfree(old_cfg); + free_cpumask_var(cfg->domain); + free_cpumask_var(cfg->old_domain); + kfree(cfg); } void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 490dac63c2d2..f2f9ac7da25c 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -545,7 +545,7 @@ void __cpuinit cpu_detect(struct cpuinfo_x86 *c) } } -static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) +void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) { u32 tfms, xlvl; u32 ebx; diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 3624e8a0f71b..f668bb1f7d43 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -33,5 +33,6 @@ extern const struct cpu_dev *const __x86_cpu_dev_start[], *const __x86_cpu_dev_end[]; extern void cpu_detect_cache_sizes(struct cpuinfo_x86 *c); +extern void get_cpu_cap(struct cpuinfo_x86 *c); #endif diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c index 994230d4dc4e..4f6f679f2799 100644 --- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c @@ -368,16 +368,22 @@ static int __init pcc_cpufreq_do_osc(acpi_handle *handle) return -ENODEV; out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_BUFFER) - return -ENODEV; + if (out_obj->type != ACPI_TYPE_BUFFER) { + ret = -ENODEV; + goto out_free; + } errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); - if (errors) - return -ENODEV; + if (errors) { + ret = -ENODEV; + goto out_free; + } supported = *((u32 *)(out_obj->buffer.pointer + 4)); - if (!(supported & 0x1)) - return -ENODEV; + if (!(supported & 0x1)) { + ret = -ENODEV; + goto out_free; + } out_free: kfree(output.pointer); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 85f69cdeae10..b4389441efbb 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -39,6 +39,7 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID; wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable); c->cpuid_level = cpuid_eax(0); + get_cpu_cap(c); } } diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index b560db3305be..249015173992 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -660,8 +660,12 @@ static int p4_pmu_handle_irq(struct pt_regs *regs) for (idx = 0; idx < x86_pmu.num_counters; idx++) { int overflow; - if (!test_bit(idx, cpuc->active_mask)) + if (!test_bit(idx, cpuc->active_mask)) { + /* catch in-flight IRQs */ + if (__test_and_clear_bit(idx, cpuc->running)) + handled++; continue; + } event = cpuc->events[idx]; hwc = &event->hw; diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 410fdb3f1939..7494999141b3 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -506,7 +506,7 @@ static int hpet_assign_irq(struct hpet_dev *dev) { unsigned int irq; - irq = create_irq(); + irq = create_irq_nr(0, -1); if (!irq) return -EINVAL; diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c index e0bc186d7501..1c355c550960 100644 --- a/arch/x86/kernel/module.c +++ b/arch/x86/kernel/module.c @@ -239,11 +239,10 @@ int module_finalize(const Elf_Ehdr *hdr, apply_paravirt(pseg, pseg + para->sh_size); } - return module_bug_finalize(hdr, sechdrs, me); + return 0; } void module_arch_cleanup(struct module *mod) { alternatives_smp_module_del(mod); - module_bug_cleanup(mod); } diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 009b819f48d0..f1575c9a2572 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -674,6 +674,7 @@ static int __init ppro_init(char **cpu_type) case 0x0f: case 0x16: case 0x17: + case 0x1d: *cpu_type = "i386/core_2"; break; case 0x1a: diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 1a5353a753fc..b2bb5aa3b054 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -489,8 +489,9 @@ static void xen_hvm_setup_cpu_clockevents(void) __init void xen_hvm_init_time_ops(void) { /* vector callback is needed otherwise we cannot receive interrupts - * on cpu > 0 */ - if (!xen_have_vector_callback && num_present_cpus() > 1) + * on cpu > 0 and at this point we don't know how many cpus are + * available */ + if (!xen_have_vector_callback) return; if (!xen_feature(XENFEAT_hvm_safe_pvclock)) { printk(KERN_INFO "Xen doesn't support pvclock on HVM," diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index b811f2173f6f..88681aca88c5 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -105,7 +105,7 @@ config ACPI_EC_DEBUGFS Be aware that using this interface can confuse your Embedded Controller in a way that a normal reboot is not enough. You then - have to power of your system, and remove the laptop battery for + have to power off your system, and remove the laptop battery for some seconds. An Embedded Controller typically is available on laptops and reads sensor values like battery state and temperature. diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index b76848c80be3..6b115f6c4313 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -382,31 +382,32 @@ static void acpi_pad_remove_sysfs(struct acpi_device *device) device_remove_file(&device->dev, &dev_attr_rrtime); } -/* Query firmware how many CPUs should be idle */ -static int acpi_pad_pur(acpi_handle handle, int *num_cpus) +/* + * Query firmware how many CPUs should be idle + * return -1 on failure + */ +static int acpi_pad_pur(acpi_handle handle) { struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *package; - int rev, num, ret = -EINVAL; + int num = -1; if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer))) - return -EINVAL; + return num; if (!buffer.length || !buffer.pointer) - return -EINVAL; + return num; package = buffer.pointer; - if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2) - goto out; - rev = package->package.elements[0].integer.value; - num = package->package.elements[1].integer.value; - if (rev != 1 || num < 0) - goto out; - *num_cpus = num; - ret = 0; -out: + + if (package->type == ACPI_TYPE_PACKAGE && + package->package.count == 2 && + package->package.elements[0].integer.value == 1) /* rev 1 */ + + num = package->package.elements[1].integer.value; + kfree(buffer.pointer); - return ret; + return num; } /* Notify firmware how many CPUs are idle */ @@ -433,7 +434,8 @@ static void acpi_pad_handle_notify(acpi_handle handle) uint32_t idle_cpus; mutex_lock(&isolated_cpus_lock); - if (acpi_pad_pur(handle, &num_cpus)) { + num_cpus = acpi_pad_pur(handle); + if (num_cpus < 0) { mutex_unlock(&isolated_cpus_lock); return; } diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index df85b53a674f..7dad9160f209 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -854,6 +854,7 @@ struct acpi_bit_register_info { ACPI_BITMASK_POWER_BUTTON_STATUS | \ ACPI_BITMASK_SLEEP_BUTTON_STATUS | \ ACPI_BITMASK_RT_CLOCK_STATUS | \ + ACPI_BITMASK_PCIEXP_WAKE_DISABLE | \ ACPI_BITMASK_WAKE_STATUS) #define ACPI_BITMASK_TIMER_ENABLE 0x0001 diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c index 74c24d517f81..4093522eed45 100644 --- a/drivers/acpi/acpica/exutils.c +++ b/drivers/acpi/acpica/exutils.c @@ -109,7 +109,7 @@ void acpi_ex_enter_interpreter(void) * * DESCRIPTION: Reacquire the interpreter execution region from within the * interpreter code. Failure to enter the interpreter region is a - * fatal system error. Used in conjuction with + * fatal system error. Used in conjunction with * relinquish_interpreter * ******************************************************************************/ diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index 22cfcfbd9fff..491191e6cf69 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -149,7 +149,7 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) /* * 16-, 32-, and 64-bit cases must use the move macros that perform - * endian conversion and/or accomodate hardware that cannot perform + * endian conversion and/or accommodate hardware that cannot perform * misaligned memory transfers */ case ACPI_RSC_MOVE16: diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig index 907e350f1c7d..fca34ccfd294 100644 --- a/drivers/acpi/apei/Kconfig +++ b/drivers/acpi/apei/Kconfig @@ -34,6 +34,6 @@ config ACPI_APEI_ERST_DEBUG depends on ACPI_APEI help ERST is a way provided by APEI to save and retrieve hardware - error infomation to and from a persistent store. Enable this + error information to and from a persistent store. Enable this if you want to debugging and testing the ERST kernel support and firmware implementation. diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 73fd0c7487c1..4a904a4bf05f 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -445,11 +445,15 @@ EXPORT_SYMBOL_GPL(apei_resources_sub); int apei_resources_request(struct apei_resources *resources, const char *desc) { - struct apei_res *res, *res_bak; + struct apei_res *res, *res_bak = NULL; struct resource *r; + int rc; - apei_resources_sub(resources, &apei_resources_all); + rc = apei_resources_sub(resources, &apei_resources_all); + if (rc) + return rc; + rc = -EINVAL; list_for_each_entry(res, &resources->iomem, list) { r = request_mem_region(res->start, res->end - res->start, desc); @@ -475,7 +479,11 @@ int apei_resources_request(struct apei_resources *resources, } } - apei_resources_merge(&apei_resources_all, resources); + rc = apei_resources_merge(&apei_resources_all, resources); + if (rc) { + pr_err(APEI_PFX "Fail to merge resources!\n"); + goto err_unmap_ioport; + } return 0; err_unmap_ioport: @@ -491,12 +499,13 @@ err_unmap_iomem: break; release_mem_region(res->start, res->end - res->start); } - return -EINVAL; + return rc; } EXPORT_SYMBOL_GPL(apei_resources_request); void apei_resources_release(struct apei_resources *resources) { + int rc; struct apei_res *res; list_for_each_entry(res, &resources->iomem, list) @@ -504,7 +513,9 @@ void apei_resources_release(struct apei_resources *resources) list_for_each_entry(res, &resources->ioport, list) release_region(res->start, res->end - res->start); - apei_resources_sub(&apei_resources_all, resources); + rc = apei_resources_sub(&apei_resources_all, resources); + if (rc) + pr_err(APEI_PFX "Fail to sub resources!\n"); } EXPORT_SYMBOL_GPL(apei_resources_release); diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 465c885938ee..cf29df69380b 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -426,7 +426,9 @@ DEFINE_SIMPLE_ATTRIBUTE(error_inject_fops, NULL, static int einj_check_table(struct acpi_table_einj *einj_tab) { - if (einj_tab->header_length != sizeof(struct acpi_table_einj)) + if ((einj_tab->header_length != + (sizeof(struct acpi_table_einj) - sizeof(einj_tab->header))) + && (einj_tab->header_length != sizeof(struct acpi_table_einj))) return -EINVAL; if (einj_tab->header.length < sizeof(struct acpi_table_einj)) return -EINVAL; diff --git a/drivers/acpi/apei/erst-dbg.c b/drivers/acpi/apei/erst-dbg.c index 5281ddda2777..da1228a9a544 100644 --- a/drivers/acpi/apei/erst-dbg.c +++ b/drivers/acpi/apei/erst-dbg.c @@ -2,7 +2,7 @@ * APEI Error Record Serialization Table debug support * * ERST is a way provided by APEI to save and retrieve hardware error - * infomation to and from a persistent store. This file provide the + * information to and from a persistent store. This file provide the * debugging/testing support for ERST kernel support and firmware * implementation. * @@ -111,11 +111,13 @@ retry: goto out; } if (len > erst_dbg_buf_len) { - kfree(erst_dbg_buf); + void *p; rc = -ENOMEM; - erst_dbg_buf = kmalloc(len, GFP_KERNEL); - if (!erst_dbg_buf) + p = kmalloc(len, GFP_KERNEL); + if (!p) goto out; + kfree(erst_dbg_buf); + erst_dbg_buf = p; erst_dbg_buf_len = len; goto retry; } @@ -150,11 +152,13 @@ static ssize_t erst_dbg_write(struct file *filp, const char __user *ubuf, if (mutex_lock_interruptible(&erst_dbg_mutex)) return -EINTR; if (usize > erst_dbg_buf_len) { - kfree(erst_dbg_buf); + void *p; rc = -ENOMEM; - erst_dbg_buf = kmalloc(usize, GFP_KERNEL); - if (!erst_dbg_buf) + p = kmalloc(usize, GFP_KERNEL); + if (!p) goto out; + kfree(erst_dbg_buf); + erst_dbg_buf = p; erst_dbg_buf_len = usize; } rc = copy_from_user(erst_dbg_buf, ubuf, usize); diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 18645f4e83cd..1211c03149e8 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -2,7 +2,7 @@ * APEI Error Record Serialization Table support * * ERST is a way provided by APEI to save and retrieve hardware error - * infomation to and from a persistent store. + * information to and from a persistent store. * * For more information about ERST, please refer to ACPI Specification * version 4.0, section 17.4. @@ -266,13 +266,30 @@ static int erst_exec_move_data(struct apei_exec_context *ctx, { int rc; u64 offset; + void *src, *dst; + + /* ioremap does not work in interrupt context */ + if (in_interrupt()) { + pr_warning(ERST_PFX + "MOVE_DATA can not be used in interrupt context"); + return -EBUSY; + } rc = __apei_exec_read_register(entry, &offset); if (rc) return rc; - memmove((void *)ctx->dst_base + offset, - (void *)ctx->src_base + offset, - ctx->var2); + + src = ioremap(ctx->src_base + offset, ctx->var2); + if (!src) + return -ENOMEM; + dst = ioremap(ctx->dst_base + offset, ctx->var2); + if (!dst) + return -ENOMEM; + + memmove(dst, src, ctx->var2); + + iounmap(src); + iounmap(dst); return 0; } @@ -750,7 +767,9 @@ __setup("erst_disable", setup_erst_disable); static int erst_check_table(struct acpi_table_erst *erst_tab) { - if (erst_tab->header_length != sizeof(struct acpi_table_erst)) + if ((erst_tab->header_length != + (sizeof(struct acpi_table_erst) - sizeof(erst_tab->header))) + && (erst_tab->header_length != sizeof(struct acpi_table_einj))) return -EINVAL; if (erst_tab->header.length < sizeof(struct acpi_table_erst)) return -EINVAL; diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 385a6059714a..0d505e59214d 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -302,7 +302,7 @@ static int __devinit ghes_probe(struct platform_device *ghes_dev) struct ghes *ghes = NULL; int rc = -EINVAL; - generic = ghes_dev->dev.platform_data; + generic = *(struct acpi_hest_generic **)ghes_dev->dev.platform_data; if (!generic->enabled) return -ENODEV; diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 343168d18266..1a3508a7fe03 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -137,20 +137,23 @@ static int hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data) static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data) { - struct acpi_hest_generic *generic; struct platform_device *ghes_dev; struct ghes_arr *ghes_arr = data; int rc; if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR) return 0; - generic = (struct acpi_hest_generic *)hest_hdr; - if (!generic->enabled) + + if (!((struct acpi_hest_generic *)hest_hdr)->enabled) return 0; ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id); if (!ghes_dev) return -ENOMEM; - ghes_dev->dev.platform_data = generic; + + rc = platform_device_add_data(ghes_dev, &hest_hdr, sizeof(void *)); + if (rc) + goto err; + rc = platform_device_add(ghes_dev); if (rc) goto err; diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c index 8f8bd736d4ff..542e53903891 100644 --- a/drivers/acpi/atomicio.c +++ b/drivers/acpi/atomicio.c @@ -142,7 +142,7 @@ static void __iomem *acpi_pre_map(phys_addr_t paddr, list_add_tail_rcu(&map->list, &acpi_iomaps); spin_unlock_irqrestore(&acpi_iomaps_lock, flags); - return vaddr + (paddr - pg_off); + return map->vaddr + (paddr - map->paddr); err_unmap: iounmap(vaddr); return NULL; diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index dc58402b0a17..98417201e9ce 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -273,7 +273,6 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_CYCLE_COUNT, POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_POWER_NOW, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 2bb28b9d91c4..f7619600270a 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -183,6 +183,8 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) { printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); acpi_osi_setup("!Windows 2006"); + acpi_osi_setup("!Windows 2006 SP1"); + acpi_osi_setup("!Windows 2006 SP2"); return 0; } static int __init dmi_disable_osi_win7(const struct dmi_system_id *d) @@ -226,6 +228,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, }, { + .callback = dmi_disable_osi_vista, + .ident = "Toshiba Satellite L355", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Satellite L355"), + }, + }, + { .callback = dmi_disable_osi_win7, .ident = "ASUS K50IJ", .matches = { @@ -233,6 +243,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "K50IJ"), }, }, + { + .callback = dmi_disable_osi_vista, + .ident = "Toshiba P305D", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"), + }, + }, /* * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 5c221ab535d5..310e3b9749cb 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -55,7 +55,7 @@ EXPORT_SYMBOL(acpi_root_dir); static int set_power_nocheck(const struct dmi_system_id *id) { printk(KERN_NOTICE PREFIX "%s detected - " - "disable power check in power transistion\n", id->ident); + "disable power check in power transition\n", id->ident); acpi_power_nocheck = 1; return 0; } @@ -80,23 +80,15 @@ static int set_copy_dsdt(const struct dmi_system_id *id) static struct dmi_system_id dsdt_dmi_table[] __initdata = { /* - * Insyde BIOS on some TOSHIBA machines corrupt the DSDT. + * Invoke DSDT corruption work-around on all Toshiba Satellite. * https://bugzilla.kernel.org/show_bug.cgi?id=14679 */ { .callback = set_copy_dsdt, - .ident = "TOSHIBA Satellite A505", + .ident = "TOSHIBA Satellite", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A505"), - }, - }, - { - .callback = set_copy_dsdt, - .ident = "TOSHIBA Satellite L505D", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L505D"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"), }, }, {} @@ -1027,7 +1019,7 @@ static int __init acpi_init(void) /* * If the laptop falls into the DMI check table, the power state check - * will be disabled in the course of device power transistion. + * will be disabled in the course of device power transition. */ dmi_check_system(power_nocheck_dmi_table); diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 8a3b840c0bb2..d94d2953c974 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -369,7 +369,9 @@ static void __exit acpi_fan_exit(void) acpi_bus_unregister_driver(&acpi_fan_driver); +#ifdef CONFIG_ACPI_PROCFS remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir); +#endif return; } diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index e9699aaed109..b618f888d66b 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -29,12 +29,6 @@ static int set_no_mwait(const struct dmi_system_id *id) static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = { { - set_no_mwait, "IFL91 board", { - DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), - DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"), - DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL}, - { set_no_mwait, "Extensa 5220", { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), DMI_MATCH(DMI_SYS_VENDOR, "Acer"), diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 156021892389..347eb21b2353 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -850,7 +850,7 @@ static int __init acpi_processor_init(void) printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n", acpi_idle_driver.name); } else { - printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s", + printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s\n", cpuidle_get_driver()->name); } diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index ba1bd263d903..3a73a93596e8 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -447,8 +447,8 @@ int acpi_processor_notify_smm(struct module *calling_module) if (!try_module_get(calling_module)) return -EINVAL; - /* is_done is set to negative if an error occured, - * and to postitive if _no_ error occured, but SMM + /* is_done is set to negative if an error occurred, + * and to postitive if _no_ error occurred, but SMM * was already notified. This avoids double notification * which might lead to unexpected results... */ diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index cf82989ae756..4754ff6e70e6 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -363,6 +363,12 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d) return 0; } +static int __init init_nvs_nosave(const struct dmi_system_id *d) +{ + acpi_nvs_nosave(); + return 0; +} + static struct dmi_system_id __initdata acpisleep_dmi_table[] = { { .callback = init_old_suspend_ordering, @@ -397,6 +403,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"), }, }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-SR11M", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Everex StepNote Series", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"), + }, + }, {}, }; #endif /* CONFIG_SUSPEND */ diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 68e2e4582fa2..f8588f81048a 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -100,7 +100,7 @@ static const struct acpi_dlevel acpi_debug_levels[] = { ACPI_DEBUG_INIT(ACPI_LV_EVENTS), }; -static int param_get_debug_layer(char *buffer, struct kernel_param *kp) +static int param_get_debug_layer(char *buffer, const struct kernel_param *kp) { int result = 0; int i; @@ -128,7 +128,7 @@ static int param_get_debug_layer(char *buffer, struct kernel_param *kp) return result; } -static int param_get_debug_level(char *buffer, struct kernel_param *kp) +static int param_get_debug_level(char *buffer, const struct kernel_param *kp) { int result = 0; int i; @@ -149,10 +149,18 @@ static int param_get_debug_level(char *buffer, struct kernel_param *kp) return result; } -module_param_call(debug_layer, param_set_uint, param_get_debug_layer, - &acpi_dbg_layer, 0644); -module_param_call(debug_level, param_set_uint, param_get_debug_level, - &acpi_dbg_level, 0644); +static struct kernel_param_ops param_ops_debug_layer = { + .set = param_set_uint, + .get = param_get_debug_layer, +}; + +static struct kernel_param_ops param_ops_debug_level = { + .set = param_set_uint, + .get = param_get_debug_level, +}; + +module_param_cb(debug_layer, ¶m_ops_debug_layer, &acpi_dbg_layer, 0644); +module_param_cb(debug_level, ¶m_ops_debug_level, &acpi_dbg_level, 0644); static char trace_method_name[6]; module_param_string(trace_method_name, trace_method_name, 6, 0644); diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index c5fef01b3c95..b83676126598 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -59,8 +59,8 @@ acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context, "support\n")); *cap |= ACPI_VIDEO_BACKLIGHT; if (ACPI_FAILURE(acpi_get_handle(handle, "_BQC", &h_dummy))) - printk(KERN_WARNING FW_BUG PREFIX "ACPI brightness " - "control misses _BQC function\n"); + printk(KERN_WARNING FW_BUG PREFIX "No _BQC method, " + "cannot determine initial brightness\n"); /* We have backlight support, no need to scan further */ return AE_CTRL_TERMINATE; } diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index d31590e7011b..2737b9752205 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -298,7 +298,7 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) amba_put_disable_pclk(dev); - if (cid == 0xb105f00d) + if (cid == AMBA_CID) dev->periphid = pid; if (!dev->periphid) diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index c2408bbe9c2e..f508690eb958 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -80,7 +80,7 @@ * Limiting Performance Impact * --------------------------- * C states, especially those with large exit latencies, can have a real - * noticable impact on workloads, which is not acceptable for most sysadmins, + * noticeable impact on workloads, which is not acceptable for most sysadmins, * and in addition, less performance has a power price of its own. * * As a general rule of thumb, menu assumes that the following heuristic diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index fb64cf36ba61..eb6b54dbb806 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -580,7 +580,6 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_slave_sg( sh_chan = to_sh_chan(chan); param = chan->private; - slave_addr = param->config->addr; /* Someone calling slave DMA on a public channel? */ if (!param || !sg_len) { @@ -589,6 +588,8 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_slave_sg( return NULL; } + slave_addr = param->config->addr; + /* * if (param != NULL), this is a successfully requested slave channel, * therefore param->config != NULL too. diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index e0187d16dd7c..0fd5b85a0f75 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -1140,6 +1140,7 @@ static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = { ATTR_COUNTER(0), ATTR_COUNTER(1), ATTR_COUNTER(2), + { .attr = { .name = NULL } } }; static struct mcidev_sysfs_group i7core_udimm_counters = { diff --git a/drivers/gpio/tc35892-gpio.c b/drivers/gpio/tc35892-gpio.c index 1be6288780de..7e10c935a047 100644 --- a/drivers/gpio/tc35892-gpio.c +++ b/drivers/gpio/tc35892-gpio.c @@ -322,6 +322,9 @@ static int __devinit tc35892_gpio_probe(struct platform_device *pdev) goto out_freeirq; } + if (pdata->setup) + pdata->setup(tc35892, tc35892_gpio->chip.base); + platform_set_drvdata(pdev, tc35892_gpio); return 0; @@ -338,9 +341,14 @@ out_free: static int __devexit tc35892_gpio_remove(struct platform_device *pdev) { struct tc35892_gpio *tc35892_gpio = platform_get_drvdata(pdev); + struct tc35892 *tc35892 = tc35892_gpio->tc35892; + struct tc35892_gpio_platform_data *pdata = tc35892->pdata->gpio; int irq = platform_get_irq(pdev, 0); int ret; + if (pdata->remove) + pdata->remove(tc35892, tc35892_gpio->chip.base); + ret = gpiochip_remove(&tc35892_gpio->chip); if (ret < 0) { dev_err(tc35892_gpio->dev, diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index bf92d07510df..5663d2719063 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -148,7 +148,7 @@ int drm_gem_object_init(struct drm_device *dev, return -ENOMEM; kref_init(&obj->refcount); - kref_init(&obj->handlecount); + atomic_set(&obj->handle_count, 0); obj->size = size; atomic_inc(&dev->object_count); @@ -462,28 +462,6 @@ drm_gem_object_free(struct kref *kref) } EXPORT_SYMBOL(drm_gem_object_free); -/** - * Called after the last reference to the object has been lost. - * Must be called without holding struct_mutex - * - * Frees the object - */ -void -drm_gem_object_free_unlocked(struct kref *kref) -{ - struct drm_gem_object *obj = (struct drm_gem_object *) kref; - struct drm_device *dev = obj->dev; - - if (dev->driver->gem_free_object_unlocked != NULL) - dev->driver->gem_free_object_unlocked(obj); - else if (dev->driver->gem_free_object != NULL) { - mutex_lock(&dev->struct_mutex); - dev->driver->gem_free_object(obj); - mutex_unlock(&dev->struct_mutex); - } -} -EXPORT_SYMBOL(drm_gem_object_free_unlocked); - static void drm_gem_object_ref_bug(struct kref *list_kref) { BUG(); @@ -496,12 +474,8 @@ static void drm_gem_object_ref_bug(struct kref *list_kref) * called before drm_gem_object_free or we'll be touching * freed memory */ -void -drm_gem_object_handle_free(struct kref *kref) +void drm_gem_object_handle_free(struct drm_gem_object *obj) { - struct drm_gem_object *obj = container_of(kref, - struct drm_gem_object, - handlecount); struct drm_device *dev = obj->dev; /* Remove any name for this object */ @@ -528,6 +502,10 @@ void drm_gem_vm_open(struct vm_area_struct *vma) struct drm_gem_object *obj = vma->vm_private_data; drm_gem_object_reference(obj); + + mutex_lock(&obj->dev->struct_mutex); + drm_vm_open_locked(vma); + mutex_unlock(&obj->dev->struct_mutex); } EXPORT_SYMBOL(drm_gem_vm_open); @@ -535,7 +513,10 @@ void drm_gem_vm_close(struct vm_area_struct *vma) { struct drm_gem_object *obj = vma->vm_private_data; - drm_gem_object_unreference_unlocked(obj); + mutex_lock(&obj->dev->struct_mutex); + drm_vm_close_locked(vma); + drm_gem_object_unreference(obj); + mutex_unlock(&obj->dev->struct_mutex); } EXPORT_SYMBOL(drm_gem_vm_close); diff --git a/drivers/gpu/drm/drm_info.c b/drivers/gpu/drm/drm_info.c index 2ef2c7827243..974e970ce3f8 100644 --- a/drivers/gpu/drm/drm_info.c +++ b/drivers/gpu/drm/drm_info.c @@ -255,7 +255,7 @@ int drm_gem_one_name_info(int id, void *ptr, void *data) seq_printf(m, "%6d %8zd %7d %8d\n", obj->name, obj->size, - atomic_read(&obj->handlecount.refcount), + atomic_read(&obj->handle_count), atomic_read(&obj->refcount.refcount)); return 0; } diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c index fda67468e603..5df450683aab 100644 --- a/drivers/gpu/drm/drm_vm.c +++ b/drivers/gpu/drm/drm_vm.c @@ -433,15 +433,7 @@ static void drm_vm_open(struct vm_area_struct *vma) mutex_unlock(&dev->struct_mutex); } -/** - * \c close method for all virtual memory types. - * - * \param vma virtual memory area. - * - * Search the \p vma private data entry in drm_device::vmalist, unlink it, and - * free it. - */ -static void drm_vm_close(struct vm_area_struct *vma) +void drm_vm_close_locked(struct vm_area_struct *vma) { struct drm_file *priv = vma->vm_file->private_data; struct drm_device *dev = priv->minor->dev; @@ -451,7 +443,6 @@ static void drm_vm_close(struct vm_area_struct *vma) vma->vm_start, vma->vm_end - vma->vm_start); atomic_dec(&dev->vma_count); - mutex_lock(&dev->struct_mutex); list_for_each_entry_safe(pt, temp, &dev->vmalist, head) { if (pt->vma == vma) { list_del(&pt->head); @@ -459,6 +450,23 @@ static void drm_vm_close(struct vm_area_struct *vma) break; } } +} + +/** + * \c close method for all virtual memory types. + * + * \param vma virtual memory area. + * + * Search the \p vma private data entry in drm_device::vmalist, unlink it, and + * free it. + */ +static void drm_vm_close(struct vm_area_struct *vma) +{ + struct drm_file *priv = vma->vm_file->private_data; + struct drm_device *dev = priv->minor->dev; + + mutex_lock(&dev->struct_mutex); + drm_vm_close_locked(vma); mutex_unlock(&dev->struct_mutex); } diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index 61b4caf220fa..fb07e73581e8 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -116,7 +116,7 @@ static int i810_mmap_buffers(struct file *filp, struct vm_area_struct *vma) static const struct file_operations i810_buffer_fops = { .open = drm_open, .release = drm_release, - .unlocked_ioctl = drm_ioctl, + .unlocked_ioctl = i810_ioctl, .mmap = i810_mmap_buffers, .fasync = drm_fasync, }; diff --git a/drivers/gpu/drm/i830/i830_dma.c b/drivers/gpu/drm/i830/i830_dma.c index 671aa18415ac..cc92c7e6236f 100644 --- a/drivers/gpu/drm/i830/i830_dma.c +++ b/drivers/gpu/drm/i830/i830_dma.c @@ -118,7 +118,7 @@ static int i830_mmap_buffers(struct file *filp, struct vm_area_struct *vma) static const struct file_operations i830_buffer_fops = { .open = drm_open, .release = drm_release, - .unlocked_ioctl = drm_ioctl, + .unlocked_ioctl = i830_ioctl, .mmap = i830_mmap_buffers, .fasync = drm_fasync, }; diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 9d67b4853030..c74e4e8006d4 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1787,9 +1787,9 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) } } - div_u64(diff, diff1); + diff = div_u64(diff, diff1); ret = ((m * diff) + c); - div_u64(ret, 10); + ret = div_u64(ret, 10); dev_priv->last_count1 = total_count; dev_priv->last_time1 = now; @@ -1858,7 +1858,7 @@ void i915_update_gfx_val(struct drm_i915_private *dev_priv) /* More magic constants... */ diff = diff * 1181; - div_u64(diff, diffms * 10); + diff = div_u64(diff, diffms * 10); dev_priv->gfx_power = diff; } diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index bced9b25c71e..90b1d6753b9d 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -136,14 +136,12 @@ i915_gem_create_ioctl(struct drm_device *dev, void *data, return -ENOMEM; ret = drm_gem_handle_create(file_priv, obj, &handle); + /* drop reference from allocate - handle holds it now */ + drm_gem_object_unreference_unlocked(obj); if (ret) { - drm_gem_object_unreference_unlocked(obj); return ret; } - /* Sink the floating reference from kref_init(handlecount) */ - drm_gem_object_handle_unreference_unlocked(obj); - args->handle = handle; return 0; } @@ -471,14 +469,17 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, return -ENOENT; obj_priv = to_intel_bo(obj); - /* Bounds check source. - * - * XXX: This could use review for overflow issues... - */ - if (args->offset > obj->size || args->size > obj->size || - args->offset + args->size > obj->size) { - drm_gem_object_unreference_unlocked(obj); - return -EINVAL; + /* Bounds check source. */ + if (args->offset > obj->size || args->size > obj->size - args->offset) { + ret = -EINVAL; + goto err; + } + + if (!access_ok(VERIFY_WRITE, + (char __user *)(uintptr_t)args->data_ptr, + args->size)) { + ret = -EFAULT; + goto err; } if (i915_gem_object_needs_bit17_swizzle(obj)) { @@ -490,8 +491,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, file_priv); } +err: drm_gem_object_unreference_unlocked(obj); - return ret; } @@ -580,8 +581,6 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj, user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; - if (!access_ok(VERIFY_READ, user_data, remain)) - return -EFAULT; mutex_lock(&dev->struct_mutex); @@ -934,14 +933,17 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, return -ENOENT; obj_priv = to_intel_bo(obj); - /* Bounds check destination. - * - * XXX: This could use review for overflow issues... - */ - if (args->offset > obj->size || args->size > obj->size || - args->offset + args->size > obj->size) { - drm_gem_object_unreference_unlocked(obj); - return -EINVAL; + /* Bounds check destination. */ + if (args->offset > obj->size || args->size > obj->size - args->offset) { + ret = -EINVAL; + goto err; + } + + if (!access_ok(VERIFY_READ, + (char __user *)(uintptr_t)args->data_ptr, + args->size)) { + ret = -EFAULT; + goto err; } /* We can only do the GTT pwrite on untiled buffers, as otherwise @@ -975,8 +977,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, DRM_INFO("pwrite failed %d\n", ret); #endif +err: drm_gem_object_unreference_unlocked(obj); - return ret; } @@ -3258,6 +3260,8 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, (int) reloc->offset, reloc->read_domains, reloc->write_domain); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); return -EINVAL; } if (reloc->write_domain & I915_GEM_DOMAIN_CPU || diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c index e85246ef691c..5c428fa3e0b3 100644 --- a/drivers/gpu/drm/i915/i915_gem_evict.c +++ b/drivers/gpu/drm/i915/i915_gem_evict.c @@ -93,7 +93,7 @@ i915_gem_evict_something(struct drm_device *dev, int min_size, unsigned alignmen { drm_i915_private_t *dev_priv = dev->dev_private; struct list_head eviction_list, unwind_list; - struct drm_i915_gem_object *obj_priv, *tmp_obj_priv; + struct drm_i915_gem_object *obj_priv; struct list_head *render_iter, *bsd_iter; int ret = 0; @@ -175,39 +175,34 @@ i915_gem_evict_something(struct drm_device *dev, int min_size, unsigned alignmen return -ENOSPC; found: + /* drm_mm doesn't allow any other other operations while + * scanning, therefore store to be evicted objects on a + * temporary list. */ INIT_LIST_HEAD(&eviction_list); - list_for_each_entry_safe(obj_priv, tmp_obj_priv, - &unwind_list, evict_list) { + while (!list_empty(&unwind_list)) { + obj_priv = list_first_entry(&unwind_list, + struct drm_i915_gem_object, + evict_list); if (drm_mm_scan_remove_block(obj_priv->gtt_space)) { - /* drm_mm doesn't allow any other other operations while - * scanning, therefore store to be evicted objects on a - * temporary list. */ list_move(&obj_priv->evict_list, &eviction_list); - } else - drm_gem_object_unreference(&obj_priv->base); + continue; + } + list_del(&obj_priv->evict_list); + drm_gem_object_unreference(&obj_priv->base); } /* Unbinding will emit any required flushes */ - list_for_each_entry_safe(obj_priv, tmp_obj_priv, - &eviction_list, evict_list) { -#if WATCH_LRU - DRM_INFO("%s: evicting %p\n", __func__, &obj_priv->base); -#endif - ret = i915_gem_object_unbind(&obj_priv->base); - if (ret) - return ret; - + while (!list_empty(&eviction_list)) { + obj_priv = list_first_entry(&eviction_list, + struct drm_i915_gem_object, + evict_list); + if (ret == 0) + ret = i915_gem_object_unbind(&obj_priv->base); + list_del(&obj_priv->evict_list); drm_gem_object_unreference(&obj_priv->base); } - /* The just created free hole should be on the top of the free stack - * maintained by drm_mm, so this BUG_ON actually executes in O(1). - * Furthermore all accessed data has just recently been used, so it - * should be really fast, too. */ - BUG_ON(!drm_mm_search_free(&dev_priv->mm.gtt_space, min_size, - alignment, 0)); - - return 0; + return ret; } int diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b5bf51a4502d..979228594599 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1013,8 +1013,8 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe) DRM_DEBUG_KMS("vblank wait timed out\n"); } -/** - * intel_wait_for_vblank_off - wait for vblank after disabling a pipe +/* + * intel_wait_for_pipe_off - wait for pipe to turn off * @dev: drm device * @pipe: pipe to wait for * @@ -1022,25 +1022,39 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe) * spinning on the vblank interrupt status bit, since we won't actually * see an interrupt when the pipe is disabled. * - * So this function waits for the display line value to settle (it - * usually ends up stopping at the start of the next frame). + * On Gen4 and above: + * wait for the pipe register state bit to turn off + * + * Otherwise: + * wait for the display line value to settle (it usually + * ends up stopping at the start of the next frame). + * */ -void intel_wait_for_vblank_off(struct drm_device *dev, int pipe) +static void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; - int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL); - unsigned long timeout = jiffies + msecs_to_jiffies(100); - u32 last_line; - - /* Wait for the display line to settle */ - do { - last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK; - mdelay(5); - } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) && - time_after(timeout, jiffies)); - - if (time_after(jiffies, timeout)) - DRM_DEBUG_KMS("vblank wait timed out\n"); + + if (INTEL_INFO(dev)->gen >= 4) { + int pipeconf_reg = (pipe == 0 ? PIPEACONF : PIPEBCONF); + + /* Wait for the Pipe State to go off */ + if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, + 100, 0)) + DRM_DEBUG_KMS("pipe_off wait timed out\n"); + } else { + u32 last_line; + int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL); + unsigned long timeout = jiffies + msecs_to_jiffies(100); + + /* Wait for the display line to settle */ + do { + last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK; + mdelay(5); + } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) && + time_after(timeout, jiffies)); + if (time_after(jiffies, timeout)) + DRM_DEBUG_KMS("pipe_off wait timed out\n"); + } } /* Parameters have changed, update FBC info */ @@ -2328,13 +2342,13 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) I915_READ(dspbase_reg); } - /* Wait for vblank for the disable to take effect */ - intel_wait_for_vblank_off(dev, pipe); - /* Don't disable pipe A or pipe A PLLs if needed */ if (pipeconf_reg == PIPEACONF && - (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + (dev_priv->quirks & QUIRK_PIPEA_FORCE)) { + /* Wait for vblank for the disable to take effect */ + intel_wait_for_vblank(dev, pipe); goto skip_pipe_off; + } /* Next, disable display pipes */ temp = I915_READ(pipeconf_reg); @@ -2343,8 +2357,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) I915_READ(pipeconf_reg); } - /* Wait for vblank for the disable to take effect. */ - intel_wait_for_vblank_off(dev, pipe); + /* Wait for the pipe to turn off */ + intel_wait_for_pipe_off(dev, pipe); temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) != 0) { diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 1a51ee07de3e..9ab8708ac6ba 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1138,18 +1138,14 @@ static bool intel_dp_set_link_train(struct intel_dp *intel_dp, uint32_t dp_reg_value, uint8_t dp_train_pat, - uint8_t train_set[4], - bool first) + uint8_t train_set[4]) { struct drm_device *dev = intel_dp->base.enc.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc); int ret; I915_WRITE(intel_dp->output_reg, dp_reg_value); POSTING_READ(intel_dp->output_reg); - if (first) - intel_wait_for_vblank(dev, intel_crtc->pipe); intel_dp_aux_native_write_1(intel_dp, DP_TRAINING_PATTERN_SET, @@ -1174,10 +1170,15 @@ intel_dp_link_train(struct intel_dp *intel_dp) uint8_t voltage; bool clock_recovery = false; bool channel_eq = false; - bool first = true; int tries; u32 reg; uint32_t DP = intel_dp->DP; + struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc); + + /* Enable output, wait for it to become active */ + I915_WRITE(intel_dp->output_reg, intel_dp->DP); + POSTING_READ(intel_dp->output_reg); + intel_wait_for_vblank(dev, intel_crtc->pipe); /* Write the link configuration data */ intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET, @@ -1210,9 +1211,8 @@ intel_dp_link_train(struct intel_dp *intel_dp) reg = DP | DP_LINK_TRAIN_PAT_1; if (!intel_dp_set_link_train(intel_dp, reg, - DP_TRAINING_PATTERN_1, train_set, first)) + DP_TRAINING_PATTERN_1, train_set)) break; - first = false; /* Set training pattern 1 */ udelay(100); @@ -1266,8 +1266,7 @@ intel_dp_link_train(struct intel_dp *intel_dp) /* channel eq pattern */ if (!intel_dp_set_link_train(intel_dp, reg, - DP_TRAINING_PATTERN_2, train_set, - false)) + DP_TRAINING_PATTERN_2, train_set)) break; udelay(400); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index ad312ca6b3e5..8828b3ac6414 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -229,7 +229,6 @@ extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, struct drm_crtc *crtc); int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern void intel_wait_for_vblank_off(struct drm_device *dev, int pipe); extern void intel_wait_for_vblank(struct drm_device *dev, int pipe); extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe); extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 7bdc96256bf5..56ad9df2ccb5 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -237,8 +237,10 @@ int intel_fbdev_destroy(struct drm_device *dev, drm_fb_helper_fini(&ifbdev->helper); drm_framebuffer_cleanup(&ifb->base); - if (ifb->obj) + if (ifb->obj) { + drm_gem_object_handle_unreference(ifb->obj); drm_gem_object_unreference(ifb->obj); + } return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index dbd30b2e43fd..d2047713dc59 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -352,6 +352,7 @@ nouveau_fbcon_destroy(struct drm_device *dev, struct nouveau_fbdev *nfbdev) if (nouveau_fb->nvbo) { nouveau_bo_unmap(nouveau_fb->nvbo); + drm_gem_object_handle_unreference_unlocked(nouveau_fb->nvbo->gem); drm_gem_object_unreference_unlocked(nouveau_fb->nvbo->gem); nouveau_fb->nvbo = NULL; } diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index ead7b8fc53fc..19620a6709f5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -167,11 +167,9 @@ nouveau_gem_ioctl_new(struct drm_device *dev, void *data, goto out; ret = drm_gem_handle_create(file_priv, nvbo->gem, &req->info.handle); + /* drop reference from allocate - handle holds it now */ + drm_gem_object_unreference_unlocked(nvbo->gem); out: - drm_gem_object_handle_unreference_unlocked(nvbo->gem); - - if (ret) - drm_gem_object_unreference_unlocked(nvbo->gem); return ret; } diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c index 3ec181ff50ce..3c9964a8fbad 100644 --- a/drivers/gpu/drm/nouveau/nouveau_notifier.c +++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c @@ -79,6 +79,7 @@ nouveau_notifier_takedown_channel(struct nouveau_channel *chan) mutex_lock(&dev->struct_mutex); nouveau_bo_unpin(chan->notifier_bo); mutex_unlock(&dev->struct_mutex); + drm_gem_object_handle_unreference_unlocked(chan->notifier_bo->gem); drm_gem_object_unreference_unlocked(chan->notifier_bo->gem); drm_mm_takedown(&chan->notifier_heap); } diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index ddc3adea1dda..7a04959ba0ee 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3528,7 +3528,8 @@ void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo) /* r7xx hw bug. write to HDP_DEBUG1 followed by fb read * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL */ - if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) { + if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) && + rdev->vram_scratch.ptr) { void __iomem *ptr = (void *)rdev->vram_scratch.ptr; u32 tmp; diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index ebae14c4b768..68932ba7b8a4 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -317,6 +317,15 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, *connector_type = DRM_MODE_CONNECTOR_DVID; } + /* MSI K9A2GM V2/V3 board has no HDMI or DVI */ + if ((dev->pdev->device == 0x796e) && + (dev->pdev->subsystem_vendor == 0x1462) && + (dev->pdev->subsystem_device == 0x7302)) { + if ((supported_device == ATOM_DEVICE_DFP2_SUPPORT) || + (supported_device == ATOM_DEVICE_DFP3_SUPPORT)) + return false; + } + /* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */ if ((dev->pdev->device == 0x7941) && (dev->pdev->subsystem_vendor == 0x147b) && diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 127a395f70fb..b92d2f2fcbed 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -349,6 +349,8 @@ static void radeon_print_display_setup(struct drm_device *dev) DRM_INFO(" DFP4: %s\n", encoder_names[radeon_encoder->encoder_id]); if (devices & ATOM_DEVICE_DFP5_SUPPORT) DRM_INFO(" DFP5: %s\n", encoder_names[radeon_encoder->encoder_id]); + if (devices & ATOM_DEVICE_DFP6_SUPPORT) + DRM_INFO(" DFP6: %s\n", encoder_names[radeon_encoder->encoder_id]); if (devices & ATOM_DEVICE_TV1_SUPPORT) DRM_INFO(" TV1: %s\n", encoder_names[radeon_encoder->encoder_id]); if (devices & ATOM_DEVICE_CV_SUPPORT) @@ -841,8 +843,9 @@ static void radeon_user_framebuffer_destroy(struct drm_framebuffer *fb) { struct radeon_framebuffer *radeon_fb = to_radeon_framebuffer(fb); - if (radeon_fb->obj) + if (radeon_fb->obj) { drm_gem_object_unreference_unlocked(radeon_fb->obj); + } drm_framebuffer_cleanup(fb); kfree(radeon_fb); } diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index c74a8b20d941..9cdf6a35bc2c 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -94,8 +94,10 @@ static void radeonfb_destroy_pinned_object(struct drm_gem_object *gobj) ret = radeon_bo_reserve(rbo, false); if (likely(ret == 0)) { radeon_bo_kunmap(rbo); + radeon_bo_unpin(rbo); radeon_bo_unreserve(rbo); } + drm_gem_object_handle_unreference(gobj); drm_gem_object_unreference_unlocked(gobj); } @@ -325,8 +327,6 @@ static int radeon_fbdev_destroy(struct drm_device *dev, struct radeon_fbdev *rfb { struct fb_info *info; struct radeon_framebuffer *rfb = &rfbdev->rfb; - struct radeon_bo *rbo; - int r; if (rfbdev->helper.fbdev) { info = rfbdev->helper.fbdev; @@ -338,14 +338,8 @@ static int radeon_fbdev_destroy(struct drm_device *dev, struct radeon_fbdev *rfb } if (rfb->obj) { - rbo = rfb->obj->driver_private; - r = radeon_bo_reserve(rbo, false); - if (likely(r == 0)) { - radeon_bo_kunmap(rbo); - radeon_bo_unpin(rbo); - radeon_bo_unreserve(rbo); - } - drm_gem_object_unreference_unlocked(rfb->obj); + radeonfb_destroy_pinned_object(rfb->obj); + rfb->obj = NULL; } drm_fb_helper_fini(&rfbdev->helper); drm_framebuffer_cleanup(&rfb->base); diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index c578f265b24c..d1e595d91723 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -201,11 +201,11 @@ int radeon_gem_create_ioctl(struct drm_device *dev, void *data, return r; } r = drm_gem_handle_create(filp, gobj, &handle); + /* drop reference from allocate - handle holds it now */ + drm_gem_object_unreference_unlocked(gobj); if (r) { - drm_gem_object_unreference_unlocked(gobj); return r; } - drm_gem_object_handle_unreference_unlocked(gobj); args->handle = handle; return 0; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 72ec2e2b6e97..a96ed6d9d010 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -148,13 +148,16 @@ static struct pci_device_id vmw_pci_id_list[] = { {0, 0, 0} }; -static char *vmw_devname = "vmwgfx"; +static int enable_fbdev; static int vmw_probe(struct pci_dev *, const struct pci_device_id *); static void vmw_master_init(struct vmw_master *); static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val, void *ptr); +MODULE_PARM_DESC(enable_fbdev, "Enable vmwgfx fbdev"); +module_param_named(enable_fbdev, enable_fbdev, int, 0600); + static void vmw_print_capabilities(uint32_t capabilities) { DRM_INFO("Capabilities:\n"); @@ -192,8 +195,6 @@ static int vmw_request_device(struct vmw_private *dev_priv) { int ret; - vmw_kms_save_vga(dev_priv); - ret = vmw_fifo_init(dev_priv, &dev_priv->fifo); if (unlikely(ret != 0)) { DRM_ERROR("Unable to initialize FIFO.\n"); @@ -206,9 +207,35 @@ static int vmw_request_device(struct vmw_private *dev_priv) static void vmw_release_device(struct vmw_private *dev_priv) { vmw_fifo_release(dev_priv, &dev_priv->fifo); - vmw_kms_restore_vga(dev_priv); } +int vmw_3d_resource_inc(struct vmw_private *dev_priv) +{ + int ret = 0; + + mutex_lock(&dev_priv->release_mutex); + if (unlikely(dev_priv->num_3d_resources++ == 0)) { + ret = vmw_request_device(dev_priv); + if (unlikely(ret != 0)) + --dev_priv->num_3d_resources; + } + mutex_unlock(&dev_priv->release_mutex); + return ret; +} + + +void vmw_3d_resource_dec(struct vmw_private *dev_priv) +{ + int32_t n3d; + + mutex_lock(&dev_priv->release_mutex); + if (unlikely(--dev_priv->num_3d_resources == 0)) + vmw_release_device(dev_priv); + n3d = (int32_t) dev_priv->num_3d_resources; + mutex_unlock(&dev_priv->release_mutex); + + BUG_ON(n3d < 0); +} static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) { @@ -228,6 +255,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->last_read_sequence = (uint32_t) -100; mutex_init(&dev_priv->hw_mutex); mutex_init(&dev_priv->cmdbuf_mutex); + mutex_init(&dev_priv->release_mutex); rwlock_init(&dev_priv->resource_lock); idr_init(&dev_priv->context_idr); idr_init(&dev_priv->surface_idr); @@ -244,6 +272,8 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev_priv->vram_start = pci_resource_start(dev->pdev, 1); dev_priv->mmio_start = pci_resource_start(dev->pdev, 2); + dev_priv->enable_fb = enable_fbdev; + mutex_lock(&dev_priv->hw_mutex); vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2); @@ -343,17 +373,6 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) dev->dev_private = dev_priv; - if (!dev->devname) - dev->devname = vmw_devname; - - if (dev_priv->capabilities & SVGA_CAP_IRQMASK) { - ret = drm_irq_install(dev); - if (unlikely(ret != 0)) { - DRM_ERROR("Failed installing irq: %d\n", ret); - goto out_no_irq; - } - } - ret = pci_request_regions(dev->pdev, "vmwgfx probe"); dev_priv->stealth = (ret != 0); if (dev_priv->stealth) { @@ -369,26 +388,52 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) goto out_no_device; } } - ret = vmw_request_device(dev_priv); + ret = vmw_kms_init(dev_priv); if (unlikely(ret != 0)) - goto out_no_device; - vmw_kms_init(dev_priv); + goto out_no_kms; vmw_overlay_init(dev_priv); - vmw_fb_init(dev_priv); + if (dev_priv->enable_fb) { + ret = vmw_3d_resource_inc(dev_priv); + if (unlikely(ret != 0)) + goto out_no_fifo; + vmw_kms_save_vga(dev_priv); + vmw_fb_init(dev_priv); + DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ? + "Detected device 3D availability.\n" : + "Detected no device 3D availability.\n"); + } else { + DRM_INFO("Delayed 3D detection since we're not " + "running the device in SVGA mode yet.\n"); + } + + if (dev_priv->capabilities & SVGA_CAP_IRQMASK) { + ret = drm_irq_install(dev); + if (unlikely(ret != 0)) { + DRM_ERROR("Failed installing irq: %d\n", ret); + goto out_no_irq; + } + } dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier; register_pm_notifier(&dev_priv->pm_nb); - DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ? "Have 3D\n" : "No 3D\n"); - return 0; -out_no_device: - if (dev_priv->capabilities & SVGA_CAP_IRQMASK) - drm_irq_uninstall(dev_priv->dev); - if (dev->devname == vmw_devname) - dev->devname = NULL; out_no_irq: + if (dev_priv->enable_fb) { + vmw_fb_close(dev_priv); + vmw_kms_restore_vga(dev_priv); + vmw_3d_resource_dec(dev_priv); + } +out_no_fifo: + vmw_overlay_close(dev_priv); + vmw_kms_close(dev_priv); +out_no_kms: + if (dev_priv->stealth) + pci_release_region(dev->pdev, 2); + else + pci_release_regions(dev->pdev); +out_no_device: ttm_object_device_release(&dev_priv->tdev); out_err4: iounmap(dev_priv->mmio_virt); @@ -415,19 +460,20 @@ static int vmw_driver_unload(struct drm_device *dev) unregister_pm_notifier(&dev_priv->pm_nb); - vmw_fb_close(dev_priv); + if (dev_priv->capabilities & SVGA_CAP_IRQMASK) + drm_irq_uninstall(dev_priv->dev); + if (dev_priv->enable_fb) { + vmw_fb_close(dev_priv); + vmw_kms_restore_vga(dev_priv); + vmw_3d_resource_dec(dev_priv); + } vmw_kms_close(dev_priv); vmw_overlay_close(dev_priv); - vmw_release_device(dev_priv); if (dev_priv->stealth) pci_release_region(dev->pdev, 2); else pci_release_regions(dev->pdev); - if (dev_priv->capabilities & SVGA_CAP_IRQMASK) - drm_irq_uninstall(dev_priv->dev); - if (dev->devname == vmw_devname) - dev->devname = NULL; ttm_object_device_release(&dev_priv->tdev); iounmap(dev_priv->mmio_virt); drm_mtrr_del(dev_priv->mmio_mtrr, dev_priv->mmio_start, @@ -500,7 +546,7 @@ static long vmw_unlocked_ioctl(struct file *filp, unsigned int cmd, struct drm_ioctl_desc *ioctl = &vmw_ioctls[nr - DRM_COMMAND_BASE]; - if (unlikely(ioctl->cmd != cmd)) { + if (unlikely(ioctl->cmd_drv != cmd)) { DRM_ERROR("Invalid command format, ioctl %d\n", nr - DRM_COMMAND_BASE); return -EINVAL; @@ -589,6 +635,16 @@ static int vmw_master_set(struct drm_device *dev, struct vmw_master *vmaster = vmw_master(file_priv->master); int ret = 0; + if (!dev_priv->enable_fb) { + ret = vmw_3d_resource_inc(dev_priv); + if (unlikely(ret != 0)) + return ret; + vmw_kms_save_vga(dev_priv); + mutex_lock(&dev_priv->hw_mutex); + vmw_write(dev_priv, SVGA_REG_TRACES, 0); + mutex_unlock(&dev_priv->hw_mutex); + } + if (active) { BUG_ON(active != &dev_priv->fbdev_master); ret = ttm_vt_lock(&active->lock, false, vmw_fp->tfile); @@ -617,7 +673,13 @@ static int vmw_master_set(struct drm_device *dev, return 0; out_no_active_lock: - vmw_release_device(dev_priv); + if (!dev_priv->enable_fb) { + mutex_lock(&dev_priv->hw_mutex); + vmw_write(dev_priv, SVGA_REG_TRACES, 1); + mutex_unlock(&dev_priv->hw_mutex); + vmw_kms_restore_vga(dev_priv); + vmw_3d_resource_dec(dev_priv); + } return ret; } @@ -645,11 +707,23 @@ static void vmw_master_drop(struct drm_device *dev, ttm_lock_set_kill(&vmaster->lock, true, SIGTERM); + if (!dev_priv->enable_fb) { + ret = ttm_bo_evict_mm(&dev_priv->bdev, TTM_PL_VRAM); + if (unlikely(ret != 0)) + DRM_ERROR("Unable to clean VRAM on master drop.\n"); + mutex_lock(&dev_priv->hw_mutex); + vmw_write(dev_priv, SVGA_REG_TRACES, 1); + mutex_unlock(&dev_priv->hw_mutex); + vmw_kms_restore_vga(dev_priv); + vmw_3d_resource_dec(dev_priv); + } + dev_priv->active_master = &dev_priv->fbdev_master; ttm_lock_set_kill(&dev_priv->fbdev_master.lock, false, SIGTERM); ttm_vt_unlock(&dev_priv->fbdev_master.lock); - vmw_fb_on(dev_priv); + if (dev_priv->enable_fb) + vmw_fb_on(dev_priv); } @@ -722,6 +796,7 @@ static struct drm_driver driver = { .irq_postinstall = vmw_irq_postinstall, .irq_uninstall = vmw_irq_uninstall, .irq_handler = vmw_irq_handler, + .get_vblank_counter = vmw_get_vblank_counter, .reclaim_buffers_locked = NULL, .get_map_ofs = drm_core_get_map_ofs, .get_reg_ofs = drm_core_get_reg_ofs, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 429f917b60bf..58de6393f611 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -277,6 +277,7 @@ struct vmw_private { bool stealth; bool is_opened; + bool enable_fb; /** * Master management. @@ -285,6 +286,9 @@ struct vmw_private { struct vmw_master *active_master; struct vmw_master fbdev_master; struct notifier_block pm_nb; + + struct mutex release_mutex; + uint32_t num_3d_resources; }; static inline struct vmw_private *vmw_priv(struct drm_device *dev) @@ -319,6 +323,9 @@ static inline uint32_t vmw_read(struct vmw_private *dev_priv, return val; } +int vmw_3d_resource_inc(struct vmw_private *dev_priv); +void vmw_3d_resource_dec(struct vmw_private *dev_priv); + /** * GMR utilities - vmwgfx_gmr.c */ @@ -511,6 +518,7 @@ void vmw_kms_write_svga(struct vmw_private *vmw_priv, unsigned bbp, unsigned depth); int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); +u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc); /** * Overlay control - vmwgfx_overlay.c diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c index 870967a97c15..409e172f4abf 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c @@ -615,6 +615,11 @@ int vmw_dmabuf_to_start_of_vram(struct vmw_private *vmw_priv, if (unlikely(ret != 0)) goto err_unlock; + if (bo->mem.mem_type == TTM_PL_VRAM && + bo->mem.mm_node->start < bo->num_pages) + (void) ttm_bo_validate(bo, &vmw_sys_placement, false, + false, false); + ret = ttm_bo_validate(bo, &ne_placement, false, false, false); /* Could probably bug on */ diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index e6a1eb7ea954..0fe31766e4cf 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -106,6 +106,7 @@ int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) mutex_lock(&dev_priv->hw_mutex); dev_priv->enable_state = vmw_read(dev_priv, SVGA_REG_ENABLE); dev_priv->config_done_state = vmw_read(dev_priv, SVGA_REG_CONFIG_DONE); + dev_priv->traces_state = vmw_read(dev_priv, SVGA_REG_TRACES); vmw_write(dev_priv, SVGA_REG_ENABLE, 1); min = 4; @@ -175,6 +176,8 @@ void vmw_fifo_release(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo) dev_priv->config_done_state); vmw_write(dev_priv, SVGA_REG_ENABLE, dev_priv->enable_state); + vmw_write(dev_priv, SVGA_REG_TRACES, + dev_priv->traces_state); mutex_unlock(&dev_priv->hw_mutex); vmw_fence_queue_takedown(&fifo->fence_queue); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 64d7f47df868..e882ba099f0c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -898,7 +898,19 @@ int vmw_kms_save_vga(struct vmw_private *vmw_priv) save->width = vmw_read(vmw_priv, SVGA_REG_DISPLAY_WIDTH); save->height = vmw_read(vmw_priv, SVGA_REG_DISPLAY_HEIGHT); vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID); + if (i == 0 && vmw_priv->num_displays == 1 && + save->width == 0 && save->height == 0) { + + /* + * It should be fairly safe to assume that these + * values are uninitialized. + */ + + save->width = vmw_priv->vga_width - save->pos_x; + save->height = vmw_priv->vga_height - save->pos_y; + } } + return 0; } @@ -984,3 +996,8 @@ out_unlock: ttm_read_unlock(&vmaster->lock); return ret; } + +u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc) +{ + return 0; +} diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c index 7083b1a24df3..11cb39e3accb 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c @@ -27,6 +27,8 @@ #include "vmwgfx_kms.h" +#define VMWGFX_LDU_NUM_DU 8 + #define vmw_crtc_to_ldu(x) \ container_of(x, struct vmw_legacy_display_unit, base.crtc) #define vmw_encoder_to_ldu(x) \ @@ -536,6 +538,10 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit) int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv) { + struct drm_device *dev = dev_priv->dev; + int i; + int ret; + if (dev_priv->ldu_priv) { DRM_INFO("ldu system already on\n"); return -EINVAL; @@ -553,23 +559,24 @@ int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv) drm_mode_create_dirty_info_property(dev_priv->dev); - vmw_ldu_init(dev_priv, 0); - /* for old hardware without multimon only enable one display */ if (dev_priv->capabilities & SVGA_CAP_MULTIMON) { - vmw_ldu_init(dev_priv, 1); - vmw_ldu_init(dev_priv, 2); - vmw_ldu_init(dev_priv, 3); - vmw_ldu_init(dev_priv, 4); - vmw_ldu_init(dev_priv, 5); - vmw_ldu_init(dev_priv, 6); - vmw_ldu_init(dev_priv, 7); + for (i = 0; i < VMWGFX_LDU_NUM_DU; ++i) + vmw_ldu_init(dev_priv, i); + ret = drm_vblank_init(dev, VMWGFX_LDU_NUM_DU); + } else { + /* for old hardware without multimon only enable one display */ + vmw_ldu_init(dev_priv, 0); + ret = drm_vblank_init(dev, 1); } - return 0; + return ret; } int vmw_kms_close_legacy_display_system(struct vmw_private *dev_priv) { + struct drm_device *dev = dev_priv->dev; + + drm_vblank_cleanup(dev); if (!dev_priv->ldu_priv) return -ENOSYS; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 5f2d5df01e5c..c8c40e9979db 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -211,6 +211,7 @@ static void vmw_hw_context_destroy(struct vmw_resource *res) cmd->body.cid = cpu_to_le32(res->id); vmw_fifo_commit(dev_priv, sizeof(*cmd)); + vmw_3d_resource_dec(dev_priv); } static int vmw_context_init(struct vmw_private *dev_priv, @@ -247,6 +248,7 @@ static int vmw_context_init(struct vmw_private *dev_priv, cmd->body.cid = cpu_to_le32(res->id); vmw_fifo_commit(dev_priv, sizeof(*cmd)); + (void) vmw_3d_resource_inc(dev_priv); vmw_resource_activate(res, vmw_hw_context_destroy); return 0; } @@ -406,6 +408,7 @@ static void vmw_hw_surface_destroy(struct vmw_resource *res) cmd->body.sid = cpu_to_le32(res->id); vmw_fifo_commit(dev_priv, sizeof(*cmd)); + vmw_3d_resource_dec(dev_priv); } void vmw_surface_res_free(struct vmw_resource *res) @@ -473,6 +476,7 @@ int vmw_surface_init(struct vmw_private *dev_priv, } vmw_fifo_commit(dev_priv, submit_size); + (void) vmw_3d_resource_inc(dev_priv); vmw_resource_activate(res, vmw_hw_surface_destroy); return 0; } diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 537841ef44b9..75afb3b0e076 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -111,7 +111,7 @@ static struct platform_device *f71882fg_pdev; /* Super-I/O Function prototypes */ static inline int superio_inb(int base, int reg); static inline int superio_inw(int base, int reg); -static inline void superio_enter(int base); +static inline int superio_enter(int base); static inline void superio_select(int base, int ld); static inline void superio_exit(int base); @@ -861,11 +861,20 @@ static int superio_inw(int base, int reg) return val; } -static inline void superio_enter(int base) +static inline int superio_enter(int base) { + /* Don't step on other drivers' I/O space by accident */ + if (!request_muxed_region(base, 2, DRVNAME)) { + printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n", + base); + return -EBUSY; + } + /* according to the datasheet the key must be send twice! */ outb(SIO_UNLOCK_KEY, base); outb(SIO_UNLOCK_KEY, base); + + return 0; } static inline void superio_select(int base, int ld) @@ -877,6 +886,7 @@ static inline void superio_select(int base, int ld) static inline void superio_exit(int base) { outb(SIO_LOCK_KEY, base); + release_region(base, 2); } static inline int fan_from_reg(u16 reg) @@ -2175,21 +2185,15 @@ static int f71882fg_remove(struct platform_device *pdev) static int __init f71882fg_find(int sioaddr, unsigned short *address, struct f71882fg_sio_data *sio_data) { - int err = -ENODEV; u16 devid; - - /* Don't step on other drivers' I/O space by accident */ - if (!request_region(sioaddr, 2, DRVNAME)) { - printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n", - (int)sioaddr); - return -EBUSY; - } - - superio_enter(sioaddr); + int err = superio_enter(sioaddr); + if (err) + return err; devid = superio_inw(sioaddr, SIO_REG_MANID); if (devid != SIO_FINTEK_ID) { pr_debug(DRVNAME ": Not a Fintek device\n"); + err = -ENODEV; goto exit; } @@ -2213,6 +2217,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, default: printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n", (unsigned int)devid); + err = -ENODEV; goto exit; } @@ -2223,12 +2228,14 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) { printk(KERN_WARNING DRVNAME ": Device not activated\n"); + err = -ENODEV; goto exit; } *address = superio_inw(sioaddr, SIO_REG_ADDR); if (*address == 0) { printk(KERN_WARNING DRVNAME ": Base address not set\n"); + err = -ENODEV; goto exit; } *address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */ @@ -2239,7 +2246,6 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, (int)superio_inb(sioaddr, SIO_REG_DEVREV)); exit: superio_exit(sioaddr); - release_region(sioaddr, 2); return err; } diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 2222c87876b9..b8feac5f2ef4 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -357,9 +357,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) dev->terminate = 0; - /* write the data into mode register */ - davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); - /* * First byte should be set here, not after interrupt, * because transmit-data-ready interrupt can come before @@ -371,6 +368,9 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) dev->buf_len--; } + /* write the data into mode register; start transmitting */ + davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); + r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, dev->adapter.timeout); if (r == 0) { diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index 0e9f85d0a835..56dbe54e8811 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -218,7 +218,7 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c) return result; } else if (result == 0) { dev_dbg(i2c->dev, "%s: timeout\n", __func__); - result = -ETIMEDOUT; + return -ETIMEDOUT; } return 0; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 72902e0bbfa7..bf831bf81587 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -662,8 +662,8 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) unsigned long sda_delay; if (pdata->sda_delay) { - sda_delay = (freq / 1000) * pdata->sda_delay; - sda_delay /= 1000000; + sda_delay = clkin * pdata->sda_delay; + sda_delay = DIV_ROUND_UP(sda_delay, 1000000); sda_delay = DIV_ROUND_UP(sda_delay, 5); if (sda_delay > 3) sda_delay = 3; diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index 45163693f737..ae20487e7417 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -838,7 +838,7 @@ static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode) static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) { - hpt3xxn_set_clock(drive->hwif, rq_data_dir(rq) ? 0x23 : 0x21); + hpt3xxn_set_clock(drive->hwif, rq_data_dir(rq) ? 0x21 : 0x23); } /** @@ -1173,8 +1173,9 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) u16 mcr; pci_read_config_word(dev, mcr_addr, &mcr); - pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); - /* now read cable id register */ + pci_write_config_word(dev, mcr_addr, mcr | 0x8000); + /* Debounce, then read cable ID register */ + udelay(10); pci_read_config_byte(dev, 0x5a, &scr1); pci_write_config_word(dev, mcr_addr, mcr); } else if (chip_type >= HPT370) { @@ -1185,10 +1186,11 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) u8 scr2 = 0; pci_read_config_byte(dev, 0x5b, &scr2); - pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); - /* now read cable id register */ + pci_write_config_byte(dev, 0x5b, scr2 & ~1); + /* Debounce, then read cable ID register */ + udelay(10); pci_read_config_byte(dev, 0x5a, &scr1); - pci_write_config_byte(dev, 0x5b, scr2); + pci_write_config_byte(dev, 0x5b, scr2); } else pci_read_config_byte(dev, 0x5a, &scr1); diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index a10152bb1427..0906fc5b69b9 100755..100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -83,7 +83,7 @@ static unsigned int mwait_substates; /* Reliable LAPIC Timer States, bit 1 for C1 etc. */ static unsigned int lapic_timer_reliable_states; -static struct cpuidle_device *intel_idle_cpuidle_devices; +static struct cpuidle_device __percpu *intel_idle_cpuidle_devices; static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state); static struct cpuidle_state *cpuidle_state_table; @@ -108,7 +108,7 @@ static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = { .name = "NHM-C3", .desc = "MWAIT 0x10", .driver_data = (void *) 0x10, - .flags = CPUIDLE_FLAG_TIME_VALID, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 20, .power_usage = 500, .target_residency = 80, @@ -117,7 +117,7 @@ static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = { .name = "NHM-C6", .desc = "MWAIT 0x20", .driver_data = (void *) 0x20, - .flags = CPUIDLE_FLAG_TIME_VALID, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 200, .power_usage = 350, .target_residency = 800, @@ -149,7 +149,7 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = { .name = "ATM-C4", .desc = "MWAIT 0x30", .driver_data = (void *) 0x30, - .flags = CPUIDLE_FLAG_TIME_VALID, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 100, .power_usage = 250, .target_residency = 400, @@ -159,7 +159,7 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = { .name = "ATM-C6", .desc = "MWAIT 0x40", .driver_data = (void *) 0x40, - .flags = CPUIDLE_FLAG_TIME_VALID, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 200, .power_usage = 150, .target_residency = 800, @@ -185,6 +185,16 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state) local_irq_disable(); + /* + * If the state flag indicates that the TLB will be flushed or if this + * is the deepest c-state supported, do a voluntary leave mm to avoid + * costly and mostly unnecessary wakeups for flushing the user TLB's + * associated with the active mm. + */ + if (state->flags & CPUIDLE_FLAG_TLB_FLUSHED || + (&dev->states[dev->state_count - 1] == state)) + leave_mm(cpu); + if (!(lapic_timer_reliable_states & (1 << (cstate)))) clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index d85bd8a7967d..22239e988498 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -483,6 +483,9 @@ static int joydev_handle_JSIOCSAXMAP(struct joydev *joydev, memcpy(joydev->abspam, abspam, len); + for (i = 0; i < joydev->nabs; i++) + joydev->absmap[joydev->abspam[i]] = i; + out: kfree(abspam); return retval; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9cc488d21490..df1facb0386a 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -424,6 +424,15 @@ config KEYBOARD_OMAP To compile this driver as a module, choose M here: the module will be called omap-keypad. +config KEYBOARD_TNETV107X + tristate "TI TNETV107X keypad support" + depends on ARCH_DAVINCI_TNETV107X + help + Say Y here if you want to use the TNETV107X keypad. + + To compile this driver as a module, choose M here: the + module will be called tnetv107x-keypad. + config KEYBOARD_TWL4030 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" depends on TWL4030_CORE diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 504b591be0cd..dc0451824dbf 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o +obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c new file mode 100644 index 000000000000..b4a81ebfab92 --- /dev/null +++ b/drivers/input/keyboard/tnetv107x-keypad.c @@ -0,0 +1,340 @@ +/* + * Texas Instruments TNETV107X Keypad Driver + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/input/matrix_keypad.h> + +#define BITS(x) (BIT(x) - 1) + +#define KEYPAD_ROWS 9 +#define KEYPAD_COLS 9 + +#define DEBOUNCE_MIN 0x400ul +#define DEBOUNCE_MAX 0x3ffffffful + +struct keypad_regs { + u32 rev; + u32 mode; + u32 mask; + u32 pol; + u32 dclock; + u32 rclock; + u32 stable_cnt; + u32 in_en; + u32 out; + u32 out_en; + u32 in; + u32 lock; + u32 pres[3]; +}; + +#define keypad_read(kp, reg) __raw_readl(&(kp)->regs->reg) +#define keypad_write(kp, reg, val) __raw_writel(val, &(kp)->regs->reg) + +struct keypad_data { + struct input_dev *input_dev; + struct resource *res; + struct keypad_regs __iomem *regs; + struct clk *clk; + struct device *dev; + spinlock_t lock; + u32 irq_press; + u32 irq_release; + int rows, cols, row_shift; + int debounce_ms, active_low; + u32 prev_keys[3]; + unsigned short keycodes[]; +}; + +static irqreturn_t keypad_irq(int irq, void *data) +{ + struct keypad_data *kp = data; + int i, bit, val, row, col, code; + unsigned long flags; + u32 curr_keys[3]; + u32 change; + + spin_lock_irqsave(&kp->lock, flags); + + memset(curr_keys, 0, sizeof(curr_keys)); + if (irq == kp->irq_press) + for (i = 0; i < 3; i++) + curr_keys[i] = keypad_read(kp, pres[i]); + + for (i = 0; i < 3; i++) { + change = curr_keys[i] ^ kp->prev_keys[i]; + + while (change) { + bit = fls(change) - 1; + change ^= BIT(bit); + val = curr_keys[i] & BIT(bit); + bit += i * 32; + row = bit / KEYPAD_COLS; + col = bit % KEYPAD_COLS; + + code = MATRIX_SCAN_CODE(row, col, kp->row_shift); + input_event(kp->input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(kp->input_dev, kp->keycodes[code], + val); + } + } + input_sync(kp->input_dev); + memcpy(kp->prev_keys, curr_keys, sizeof(curr_keys)); + + if (irq == kp->irq_press) + keypad_write(kp, lock, 0); /* Allow hardware updates */ + + spin_unlock_irqrestore(&kp->lock, flags); + + return IRQ_HANDLED; +} + +static int keypad_start(struct input_dev *dev) +{ + struct keypad_data *kp = input_get_drvdata(dev); + unsigned long mask, debounce, clk_rate_khz; + unsigned long flags; + + clk_enable(kp->clk); + clk_rate_khz = clk_get_rate(kp->clk) / 1000; + + spin_lock_irqsave(&kp->lock, flags); + + /* Initialize device registers */ + keypad_write(kp, mode, 0); + + mask = BITS(kp->rows) << KEYPAD_COLS; + mask |= BITS(kp->cols); + keypad_write(kp, mask, ~mask); + + keypad_write(kp, pol, kp->active_low ? 0 : 0x3ffff); + keypad_write(kp, stable_cnt, 3); + + debounce = kp->debounce_ms * clk_rate_khz; + debounce = clamp(debounce, DEBOUNCE_MIN, DEBOUNCE_MAX); + keypad_write(kp, dclock, debounce); + keypad_write(kp, rclock, 4 * debounce); + + keypad_write(kp, in_en, 1); + + spin_unlock_irqrestore(&kp->lock, flags); + + return 0; +} + +static void keypad_stop(struct input_dev *dev) +{ + struct keypad_data *kp = input_get_drvdata(dev); + + synchronize_irq(kp->irq_press); + synchronize_irq(kp->irq_release); + clk_disable(kp->clk); +} + +static int __devinit keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keypad_platform_data *pdata; + const struct matrix_keymap_data *keymap_data; + struct device *dev = &pdev->dev; + struct keypad_data *kp; + int error = 0, sz, row_shift; + u32 rev = 0; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(dev, "cannot find device data\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(dev, "cannot find keymap data\n"); + return -EINVAL; + } + + row_shift = get_count_order(pdata->num_col_gpios); + sz = offsetof(struct keypad_data, keycodes); + sz += (pdata->num_row_gpios << row_shift) * sizeof(kp->keycodes[0]); + kp = kzalloc(sz, GFP_KERNEL); + if (!kp) { + dev_err(dev, "cannot allocate device info\n"); + return -ENOMEM; + } + + kp->dev = dev; + kp->rows = pdata->num_row_gpios; + kp->cols = pdata->num_col_gpios; + kp->row_shift = row_shift; + platform_set_drvdata(pdev, kp); + spin_lock_init(&kp->lock); + + kp->irq_press = platform_get_irq_byname(pdev, "press"); + kp->irq_release = platform_get_irq_byname(pdev, "release"); + if (kp->irq_press < 0 || kp->irq_release < 0) { + dev_err(dev, "cannot determine device interrupts\n"); + error = -ENODEV; + goto error_res; + } + + kp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!kp->res) { + dev_err(dev, "cannot determine register area\n"); + error = -ENODEV; + goto error_res; + } + + if (!request_mem_region(kp->res->start, resource_size(kp->res), + pdev->name)) { + dev_err(dev, "cannot claim register memory\n"); + kp->res = NULL; + error = -EINVAL; + goto error_res; + } + + kp->regs = ioremap(kp->res->start, resource_size(kp->res)); + if (!kp->regs) { + dev_err(dev, "cannot map register memory\n"); + error = -ENOMEM; + goto error_map; + } + + kp->clk = clk_get(dev, NULL); + if (!kp->clk) { + dev_err(dev, "cannot claim device clock\n"); + error = -EINVAL; + goto error_clk; + } + + error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, 0, + dev_name(dev), kp); + if (error < 0) { + dev_err(kp->dev, "Could not allocate keypad press key irq\n"); + goto error_irq_press; + } + + error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, 0, + dev_name(dev), kp); + if (error < 0) { + dev_err(kp->dev, "Could not allocate keypad release key irq\n"); + goto error_irq_release; + } + + kp->input_dev = input_allocate_device(); + if (!kp->input_dev) { + dev_err(dev, "cannot allocate input device\n"); + error = -ENOMEM; + goto error_input; + } + input_set_drvdata(kp->input_dev, kp); + + kp->input_dev->name = pdev->name; + kp->input_dev->dev.parent = &pdev->dev; + kp->input_dev->open = keypad_start; + kp->input_dev->close = keypad_stop; + kp->input_dev->evbit[0] = BIT_MASK(EV_KEY); + if (!pdata->no_autorepeat) + kp->input_dev->evbit[0] |= BIT_MASK(EV_REP); + + clk_enable(kp->clk); + rev = keypad_read(kp, rev); + kp->input_dev->id.bustype = BUS_HOST; + kp->input_dev->id.product = ((rev >> 8) & 0x07); + kp->input_dev->id.version = ((rev >> 16) & 0xfff); + clk_disable(kp->clk); + + kp->input_dev->keycode = kp->keycodes; + kp->input_dev->keycodesize = sizeof(kp->keycodes[0]); + kp->input_dev->keycodemax = kp->rows << kp->row_shift; + + matrix_keypad_build_keymap(keymap_data, kp->row_shift, kp->keycodes, + kp->input_dev->keybit); + + input_set_capability(kp->input_dev, EV_MSC, MSC_SCAN); + + error = input_register_device(kp->input_dev); + if (error < 0) { + dev_err(dev, "Could not register input device\n"); + goto error_reg; + } + + return 0; + + +error_reg: + input_free_device(kp->input_dev); +error_input: + free_irq(kp->irq_release, kp); +error_irq_release: + free_irq(kp->irq_press, kp); +error_irq_press: + clk_put(kp->clk); +error_clk: + iounmap(kp->regs); +error_map: + release_mem_region(kp->res->start, resource_size(kp->res)); +error_res: + platform_set_drvdata(pdev, NULL); + kfree(kp); + return error; +} + +static int __devexit keypad_remove(struct platform_device *pdev) +{ + struct keypad_data *kp = platform_get_drvdata(pdev); + + free_irq(kp->irq_press, kp); + free_irq(kp->irq_release, kp); + input_unregister_device(kp->input_dev); + clk_put(kp->clk); + iounmap(kp->regs); + release_mem_region(kp->res->start, resource_size(kp->res)); + platform_set_drvdata(pdev, NULL); + kfree(kp); + + return 0; +} + +static struct platform_driver keypad_driver = { + .probe = keypad_probe, + .remove = __devexit_p(keypad_remove), + .driver.name = "tnetv107x-keypad", + .driver.owner = THIS_MODULE, +}; + +static int __init keypad_init(void) +{ + return platform_driver_register(&keypad_driver); +} + +static void __exit keypad_exit(void) +{ + platform_driver_unregister(&keypad_driver); +} + +module_init(keypad_init); +module_exit(keypad_exit); + +MODULE_AUTHOR("Cyril Chemparathy"); +MODULE_DESCRIPTION("TNETV107X Keypad Driver"); +MODULE_ALIAS("platform: tnetv107x-keypad"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 0d4266a533a5..360698553eb5 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -404,6 +404,13 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu retval = uinput_validate_absbits(dev); if (retval < 0) goto exit; + if (test_bit(ABS_MT_SLOT, dev->absbit)) { + int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; + input_mt_create_slots(dev, nslot); + input_set_events_per_packet(dev, 6 * nslot); + } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { + input_set_events_per_packet(dev, 60); + } } udev->state = UIST_SETUP_COMPLETE; diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 42ba3691d908..b35876ee6908 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -103,27 +103,26 @@ static void wacom_sys_irq(struct urb *urb) static int wacom_open(struct input_dev *dev) { struct wacom *wacom = input_get_drvdata(dev); + int retval = 0; - mutex_lock(&wacom->lock); - - wacom->irq->dev = wacom->usbdev; - - if (usb_autopm_get_interface(wacom->intf) < 0) { - mutex_unlock(&wacom->lock); + if (usb_autopm_get_interface(wacom->intf) < 0) return -EIO; - } + + mutex_lock(&wacom->lock); if (usb_submit_urb(wacom->irq, GFP_KERNEL)) { - usb_autopm_put_interface(wacom->intf); - mutex_unlock(&wacom->lock); - return -EIO; + retval = -EIO; + goto out; } wacom->open = true; wacom->intf->needs_remote_wakeup = 1; +out: mutex_unlock(&wacom->lock); - return 0; + if (retval) + usb_autopm_put_interface(wacom->intf); + return retval; } static void wacom_close(struct input_dev *dev) @@ -135,6 +134,8 @@ static void wacom_close(struct input_dev *dev) wacom->open = false; wacom->intf->needs_remote_wakeup = 0; mutex_unlock(&wacom->lock); + + usb_autopm_put_interface(wacom->intf); } static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc, diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 0069d9703fda..8d320289abf8 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -328,6 +328,15 @@ config TOUCHSCREEN_MIGOR To compile this driver as a module, choose M here: the module will be called migor_ts. +config TOUCHSCREEN_TNETV107X + tristate "TI TNETV107X touchscreen support" + depends on ARCH_DAVINCI_TNETV107X + help + Say Y here if you want to use the TNETV107X touchscreen. + + To compile this driver as a module, choose M here: the + module will be called tnetv107x-ts. + config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 28217e1dcafd..d41a964e673b 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o obj-$(CONFIG_TOUCHSCREEN_QT602240) += qt602240_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o +obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c new file mode 100644 index 000000000000..cf1dba2e267c --- /dev/null +++ b/drivers/input/touchscreen/tnetv107x-ts.c @@ -0,0 +1,396 @@ +/* + * Texas Instruments TNETV107X Touchscreen Driver + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <mach/tnetv107x.h> + +#define TSC_PENUP_POLL (HZ / 5) +#define IDLE_TIMEOUT 100 /* msec */ + +/* + * The first and last samples of a touch interval are usually garbage and need + * to be filtered out with these devices. The following definitions control + * the number of samples skipped. + */ +#define TSC_HEAD_SKIP 1 +#define TSC_TAIL_SKIP 1 +#define TSC_SKIP (TSC_HEAD_SKIP + TSC_TAIL_SKIP + 1) +#define TSC_SAMPLES (TSC_SKIP + 1) + +/* Register Offsets */ +struct tsc_regs { + u32 rev; + u32 tscm; + u32 bwcm; + u32 swc; + u32 adcchnl; + u32 adcdata; + u32 chval[4]; +}; + +/* TSC Mode Configuration Register (tscm) bits */ +#define WMODE BIT(0) +#define TSKIND BIT(1) +#define ZMEASURE_EN BIT(2) +#define IDLE BIT(3) +#define TSC_EN BIT(4) +#define STOP BIT(5) +#define ONE_SHOT BIT(6) +#define SINGLE BIT(7) +#define AVG BIT(8) +#define AVGNUM(x) (((x) & 0x03) << 9) +#define PVSTC(x) (((x) & 0x07) << 11) +#define PON BIT(14) +#define PONBG BIT(15) +#define AFERST BIT(16) + +/* ADC DATA Capture Register bits */ +#define DATA_VALID BIT(16) + +/* Register Access Macros */ +#define tsc_read(ts, reg) __raw_readl(&(ts)->regs->reg) +#define tsc_write(ts, reg, val) __raw_writel(val, &(ts)->regs->reg); +#define tsc_set_bits(ts, reg, val) \ + tsc_write(ts, reg, tsc_read(ts, reg) | (val)) +#define tsc_clr_bits(ts, reg, val) \ + tsc_write(ts, reg, tsc_read(ts, reg) & ~(val)) + +struct sample { + int x, y, p; +}; + +struct tsc_data { + struct input_dev *input_dev; + struct resource *res; + struct tsc_regs __iomem *regs; + struct timer_list timer; + spinlock_t lock; + struct clk *clk; + struct device *dev; + int sample_count; + struct sample samples[TSC_SAMPLES]; + int tsc_irq; +}; + +static int tsc_read_sample(struct tsc_data *ts, struct sample* sample) +{ + int x, y, z1, z2, t, p = 0; + u32 val; + + val = tsc_read(ts, chval[0]); + if (val & DATA_VALID) + x = val & 0xffff; + else + return -EINVAL; + + y = tsc_read(ts, chval[1]) & 0xffff; + z1 = tsc_read(ts, chval[2]) & 0xffff; + z2 = tsc_read(ts, chval[3]) & 0xffff; + + if (z1) { + t = ((600 * x) * (z2 - z1)); + p = t / (u32) (z1 << 12); + if (p < 0) + p = 0; + } + + sample->x = x; + sample->y = y; + sample->p = p; + + return 0; +} + +static void tsc_poll(unsigned long data) +{ + struct tsc_data *ts = (struct tsc_data *)data; + unsigned long flags; + int i, val, x, y, p; + + spin_lock_irqsave(&ts->lock, flags); + + if (ts->sample_count >= TSC_SKIP) { + input_report_abs(ts->input_dev, ABS_PRESSURE, 0); + input_report_key(ts->input_dev, BTN_TOUCH, 0); + input_sync(ts->input_dev); + } else if (ts->sample_count > 0) { + /* + * A touch event lasted less than our skip count. Salvage and + * report anyway. + */ + for (i = 0, val = 0; i < ts->sample_count; i++) + val += ts->samples[i].x; + x = val / ts->sample_count; + + for (i = 0, val = 0; i < ts->sample_count; i++) + val += ts->samples[i].y; + y = val / ts->sample_count; + + for (i = 0, val = 0; i < ts->sample_count; i++) + val += ts->samples[i].p; + p = val / ts->sample_count; + + input_report_abs(ts->input_dev, ABS_X, x); + input_report_abs(ts->input_dev, ABS_Y, y); + input_report_abs(ts->input_dev, ABS_PRESSURE, p); + input_report_key(ts->input_dev, BTN_TOUCH, 1); + input_sync(ts->input_dev); + } + + ts->sample_count = 0; + + spin_unlock_irqrestore(&ts->lock, flags); +} + +static irqreturn_t tsc_irq(int irq, void *dev_id) +{ + struct tsc_data *ts = (struct tsc_data *)dev_id; + struct sample *sample; + int index; + + spin_lock(&ts->lock); + + index = ts->sample_count % TSC_SAMPLES; + sample = &ts->samples[index]; + if (tsc_read_sample(ts, sample) < 0) + goto out; + + if (++ts->sample_count >= TSC_SKIP) { + index = (ts->sample_count - TSC_TAIL_SKIP - 1) % TSC_SAMPLES; + sample = &ts->samples[index]; + + input_report_abs(ts->input_dev, ABS_X, sample->x); + input_report_abs(ts->input_dev, ABS_Y, sample->y); + input_report_abs(ts->input_dev, ABS_PRESSURE, sample->p); + if (ts->sample_count == TSC_SKIP) + input_report_key(ts->input_dev, BTN_TOUCH, 1); + input_sync(ts->input_dev); + } + mod_timer(&ts->timer, jiffies + TSC_PENUP_POLL); +out: + spin_unlock(&ts->lock); + return IRQ_HANDLED; +} + +static int tsc_start(struct input_dev *dev) +{ + struct tsc_data *ts = input_get_drvdata(dev); + unsigned long timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT); + u32 val; + + clk_enable(ts->clk); + + /* Go to idle mode, before any initialization */ + while (time_after(timeout, jiffies)) { + if (tsc_read(ts, tscm) & IDLE) + break; + } + + if (time_before(timeout, jiffies)) { + dev_warn(ts->dev, "timeout waiting for idle\n"); + clk_disable(ts->clk); + return -EIO; + } + + /* Configure TSC Control register*/ + val = (PONBG | PON | PVSTC(4) | ONE_SHOT | ZMEASURE_EN); + tsc_write(ts, tscm, val); + + /* Bring TSC out of reset: Clear AFE reset bit */ + val &= ~(AFERST); + tsc_write(ts, tscm, val); + + /* Configure all pins for hardware control*/ + tsc_write(ts, bwcm, 0); + + /* Finally enable the TSC */ + tsc_set_bits(ts, tscm, TSC_EN); + + return 0; +} + +static void tsc_stop(struct input_dev *dev) +{ + struct tsc_data *ts = input_get_drvdata(dev); + + tsc_clr_bits(ts, tscm, TSC_EN); + synchronize_irq(ts->tsc_irq); + del_timer_sync(&ts->timer); + clk_disable(ts->clk); +} + +static int __devinit tsc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct tsc_data *ts; + int error = 0; + u32 rev = 0; + + ts = kzalloc(sizeof(struct tsc_data), GFP_KERNEL); + if (!ts) { + dev_err(dev, "cannot allocate device info\n"); + return -ENOMEM; + } + + ts->dev = dev; + spin_lock_init(&ts->lock); + setup_timer(&ts->timer, tsc_poll, (unsigned long)ts); + platform_set_drvdata(pdev, ts); + + ts->tsc_irq = platform_get_irq(pdev, 0); + if (ts->tsc_irq < 0) { + dev_err(dev, "cannot determine device interrupt\n"); + error = -ENODEV; + goto error_res; + } + + ts->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!ts->res) { + dev_err(dev, "cannot determine register area\n"); + error = -ENODEV; + goto error_res; + } + + if (!request_mem_region(ts->res->start, resource_size(ts->res), + pdev->name)) { + dev_err(dev, "cannot claim register memory\n"); + ts->res = NULL; + error = -EINVAL; + goto error_res; + } + + ts->regs = ioremap(ts->res->start, resource_size(ts->res)); + if (!ts->regs) { + dev_err(dev, "cannot map register memory\n"); + error = -ENOMEM; + goto error_map; + } + + ts->clk = clk_get(dev, NULL); + if (!ts->clk) { + dev_err(dev, "cannot claim device clock\n"); + error = -EINVAL; + goto error_clk; + } + + error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, 0, + dev_name(dev), ts); + if (error < 0) { + dev_err(ts->dev, "Could not allocate ts irq\n"); + goto error_irq; + } + + ts->input_dev = input_allocate_device(); + if (!ts->input_dev) { + dev_err(dev, "cannot allocate input device\n"); + error = -ENOMEM; + goto error_input; + } + input_set_drvdata(ts->input_dev, ts); + + ts->input_dev->name = pdev->name; + ts->input_dev->id.bustype = BUS_HOST; + ts->input_dev->dev.parent = &pdev->dev; + ts->input_dev->open = tsc_start; + ts->input_dev->close = tsc_stop; + + clk_enable(ts->clk); + rev = tsc_read(ts, rev); + ts->input_dev->id.product = ((rev >> 8) & 0x07); + ts->input_dev->id.version = ((rev >> 16) & 0xfff); + clk_disable(ts->clk); + + __set_bit(EV_KEY, ts->input_dev->evbit); + __set_bit(EV_ABS, ts->input_dev->evbit); + __set_bit(BTN_TOUCH, ts->input_dev->keybit); + + input_set_abs_params(ts->input_dev, ABS_X, 0, 0xffff, 5, 0); + input_set_abs_params(ts->input_dev, ABS_Y, 0, 0xffff, 5, 0); + input_set_abs_params(ts->input_dev, ABS_PRESSURE, 0, 4095, 128, 0); + + error = input_register_device(ts->input_dev); + if (error < 0) { + dev_err(dev, "failed input device registration\n"); + goto error_reg; + } + + return 0; + +error_reg: + input_free_device(ts->input_dev); +error_input: + free_irq(ts->tsc_irq, ts); +error_irq: + clk_put(ts->clk); +error_clk: + iounmap(ts->regs); +error_map: + release_mem_region(ts->res->start, resource_size(ts->res)); +error_res: + platform_set_drvdata(pdev, NULL); + kfree(ts); + + return error; +} + +static int __devexit tsc_remove(struct platform_device *pdev) +{ + struct tsc_data *ts = platform_get_drvdata(pdev); + + input_unregister_device(ts->input_dev); + free_irq(ts->tsc_irq, ts); + clk_put(ts->clk); + iounmap(ts->regs); + release_mem_region(ts->res->start, resource_size(ts->res)); + platform_set_drvdata(pdev, NULL); + kfree(ts); + + return 0; +} + +static struct platform_driver tsc_driver = { + .probe = tsc_probe, + .remove = __devexit_p(tsc_remove), + .driver.name = "tnetv107x-ts", + .driver.owner = THIS_MODULE, +}; + +static int __init tsc_init(void) +{ + return platform_driver_register(&tsc_driver); +} + +static void __exit tsc_exit(void) +{ + platform_driver_unregister(&tsc_driver); +} + +module_init(tsc_init); +module_exit(tsc_exit); + +MODULE_AUTHOR("Cyril Chemparathy"); +MODULE_DESCRIPTION("TNETV107X Touchscreen Driver"); +MODULE_ALIAS("platform: tnetv107x-ts"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c index 04028a9ee082..428377a5a6f5 100644 --- a/drivers/mfd/max8925-core.c +++ b/drivers/mfd/max8925-core.c @@ -429,24 +429,25 @@ static void max8925_irq_sync_unlock(unsigned int irq) irq_tsc = cache_tsc; for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) { irq_data = &max8925_irqs[i]; + /* 1 -- disable, 0 -- enable */ switch (irq_data->mask_reg) { case MAX8925_CHG_IRQ1_MASK: - irq_chg[0] &= irq_data->enable; + irq_chg[0] &= ~irq_data->enable; break; case MAX8925_CHG_IRQ2_MASK: - irq_chg[1] &= irq_data->enable; + irq_chg[1] &= ~irq_data->enable; break; case MAX8925_ON_OFF_IRQ1_MASK: - irq_on[0] &= irq_data->enable; + irq_on[0] &= ~irq_data->enable; break; case MAX8925_ON_OFF_IRQ2_MASK: - irq_on[1] &= irq_data->enable; + irq_on[1] &= ~irq_data->enable; break; case MAX8925_RTC_IRQ_MASK: - irq_rtc &= irq_data->enable; + irq_rtc &= ~irq_data->enable; break; case MAX8925_TSC_IRQ_MASK: - irq_tsc &= irq_data->enable; + irq_tsc &= ~irq_data->enable; break; default: dev_err(chip->dev, "wrong IRQ\n"); diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index 7dabe4dbd373..294183b6260b 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -394,8 +394,13 @@ static int wm831x_irq_set_type(unsigned int irq, unsigned int type) irq = irq - wm831x->irq_base; - if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) - return -EINVAL; + if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) { + /* Ignore internal-only IRQs */ + if (irq >= 0 && irq < WM831X_NUM_IRQS) + return 0; + else + return -EINVAL; + } switch (type) { case IRQ_TYPE_EDGE_BOTH: diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 840b301b5671..f2e02d7d9f3d 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -41,23 +41,35 @@ static unsigned int fmax = 515633; * @clkreg: default value for MCICLOCK register * @clkreg_enable: enable value for MMCICLOCK register * @datalength_bits: number of bits in the MMCIDATALENGTH register + * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY + * is asserted (likewise for RX) + * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY + * is asserted (likewise for RX) */ struct variant_data { unsigned int clkreg; unsigned int clkreg_enable; unsigned int datalength_bits; + unsigned int fifosize; + unsigned int fifohalfsize; }; static struct variant_data variant_arm = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, .datalength_bits = 16, }; static struct variant_data variant_u300 = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, .clkreg_enable = 1 << 13, /* HWFCEN */ .datalength_bits = 16, }; static struct variant_data variant_ux500 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, .clkreg_enable = 1 << 14, /* HWFCEN */ .datalength_bits = 24, @@ -138,6 +150,7 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) { + struct variant_data *variant = host->variant; unsigned int datactrl, timeout, irqmask; unsigned long long clks; void __iomem *base; @@ -173,7 +186,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) * If we have less than a FIFOSIZE of bytes to transfer, * trigger a PIO interrupt as soon as any data is available. */ - if (host->size < MCI_FIFOSIZE) + if (host->size < variant->fifosize) irqmask |= MCI_RXDATAAVLBLMASK; } else { /* @@ -332,13 +345,15 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status) { + struct variant_data *variant = host->variant; void __iomem *base = host->base; char *ptr = buffer; do { unsigned int count, maxcnt; - maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE; + maxcnt = status & MCI_TXFIFOEMPTY ? + variant->fifosize : variant->fifohalfsize; count = min(remain, maxcnt); writesl(base + MMCIFIFO, ptr, count >> 2); @@ -362,6 +377,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) { struct mmci_host *host = dev_id; struct sg_mapping_iter *sg_miter = &host->sg_miter; + struct variant_data *variant = host->variant; void __iomem *base = host->base; unsigned long flags; u32 status; @@ -420,7 +436,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) * If we're nearing the end of the read, switch to * "any data available" mode. */ - if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE) + if (status & MCI_RXACTIVE && host->size < variant->fifosize) writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1); /* @@ -564,18 +580,23 @@ static int mmci_get_ro(struct mmc_host *mmc) if (host->gpio_wp == -ENOSYS) return -ENOSYS; - return gpio_get_value(host->gpio_wp); + return gpio_get_value_cansleep(host->gpio_wp); } static int mmci_get_cd(struct mmc_host *mmc) { struct mmci_host *host = mmc_priv(mmc); + struct mmci_platform_data *plat = host->plat; unsigned int status; - if (host->gpio_cd == -ENOSYS) - status = host->plat->status(mmc_dev(host->mmc)); - else - status = !gpio_get_value(host->gpio_cd); + if (host->gpio_cd == -ENOSYS) { + if (!plat->status) + return 1; /* Assume always present */ + + status = plat->status(mmc_dev(host->mmc)); + } else + status = !!gpio_get_value_cansleep(host->gpio_cd) + ^ plat->cd_invert; /* * Use positive logic throughout - status is zero for no card, @@ -584,6 +605,15 @@ static int mmci_get_cd(struct mmc_host *mmc) return status; } +static irqreturn_t mmci_cd_irq(int irq, void *dev_id) +{ + struct mmci_host *host = dev_id; + + mmc_detect_change(host->mmc, msecs_to_jiffies(500)); + + return IRQ_HANDLED; +} + static const struct mmc_host_ops mmci_ops = { .request = mmci_request, .set_ios = mmci_set_ios, @@ -620,6 +650,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) host->gpio_wp = -ENOSYS; host->gpio_cd = -ENOSYS; + host->gpio_cd_irq = -1; host->hw_designer = amba_manf(dev); host->hw_revision = amba_rev(dev); @@ -699,7 +730,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) if (host->vcc == NULL) mmc->ocr_avail = plat->ocr_mask; mmc->caps = plat->capabilities; - mmc->caps |= MMC_CAP_NEEDS_POLL; /* * We can do SGIO @@ -744,6 +774,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) host->gpio_cd = plat->gpio_cd; else if (ret != -ENOSYS) goto err_gpio_cd; + + ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd), + mmci_cd_irq, 0, + DRIVER_NAME " (cd)", host); + if (ret >= 0) + host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); } if (gpio_is_valid(plat->gpio_wp)) { ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)"); @@ -755,6 +791,10 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) goto err_gpio_wp; } + if ((host->plat->status || host->gpio_cd != -ENOSYS) + && host->gpio_cd_irq < 0) + mmc->caps |= MMC_CAP_NEEDS_POLL; + ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host); if (ret) goto unmap; @@ -781,6 +821,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) if (host->gpio_wp != -ENOSYS) gpio_free(host->gpio_wp); err_gpio_wp: + if (host->gpio_cd_irq >= 0) + free_irq(host->gpio_cd_irq, host); if (host->gpio_cd != -ENOSYS) gpio_free(host->gpio_cd); err_gpio_cd: @@ -819,6 +861,8 @@ static int __devexit mmci_remove(struct amba_device *dev) if (host->gpio_wp != -ENOSYS) gpio_free(host->gpio_wp); + if (host->gpio_cd_irq >= 0) + free_irq(host->gpio_cd_irq, host); if (host->gpio_cd != -ENOSYS) gpio_free(host->gpio_cd); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 68970cfb81e1..c7d373c7aec9 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -133,13 +133,6 @@ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK) -/* - * The size of the FIFO in bytes. - */ -#define MCI_FIFOSIZE (16*4) - -#define MCI_FIFOHALFSIZE (MCI_FIFOSIZE / 2) - #define NR_SG 16 struct clk; @@ -154,6 +147,7 @@ struct mmci_host { struct clk *clk; int gpio_cd; int gpio_wp; + int gpio_cd_irq; unsigned int data_xfered; diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 4526d2791f29..4693e62145a6 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -364,6 +364,7 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) { struct regulator *reg; int ret = 0; + int ocr_value = 0; switch (host->id) { case OMAP_MMC1_DEVID: @@ -396,6 +397,17 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) } } else { host->vcc = reg; + ocr_value = mmc_regulator_get_ocrmask(reg); + if (!mmc_slot(host).ocr_mask) { + mmc_slot(host).ocr_mask = ocr_value; + } else { + if (!(mmc_slot(host).ocr_mask & ocr_value)) { + pr_err("MMC%d ocrmask %x is not supported\n", + host->id, mmc_slot(host).ocr_mask); + mmc_slot(host).ocr_mask = 0; + return -EINVAL; + } + } mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg); /* Allow an aux regulator */ @@ -982,6 +994,17 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host, OMAP_HSMMC_WRITE(host->base, SYSCTL, OMAP_HSMMC_READ(host->base, SYSCTL) | bit); + /* + * OMAP4 ES2 and greater has an updated reset logic. + * Monitor a 0->1 transition first + */ + if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) { + while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit)) + && (i++ < limit)) + cpu_relax(); + } + i = 0; + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) && (i++ < limit)) cpu_relax(); @@ -2003,6 +2026,8 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) if (res == NULL || irq < 0) return -ENXIO; + res->start += pdata->reg_offset; + res->end += pdata->reg_offset; res = request_mem_region(res->start, res->end - res->start + 1, pdev->name); if (res == NULL) @@ -2116,23 +2141,9 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE; - switch (mmc_slot(host).wires) { - case 8: - mmc->caps |= MMC_CAP_8_BIT_DATA; - /* Fall through */ - case 4: + mmc->caps |= mmc_slot(host).caps; + if (mmc->caps & MMC_CAP_8_BIT_DATA) mmc->caps |= MMC_CAP_4_BIT_DATA; - break; - case 1: - /* Nothing to crib here */ - case 0: - /* Assuming nothing was given by board, Core use's 1-Bit */ - break; - default: - /* Completely unexpected.. Core goes with 1-Bit Width */ - dev_crit(mmc_dev(host->mmc), "Invalid width %d\n used!" - "using 1 instead\n", mmc_slot(host).wires); - } if (mmc_slot(host).nonremovable) mmc->caps |= MMC_CAP_NONREMOVABLE; diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 2ac7367afe77..8beb0d0233b5 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -35,6 +35,7 @@ #include <linux/slab.h> #include <mach/nand.h> +#include <mach/aemif.h> #include <asm/mach-types.h> @@ -74,6 +75,8 @@ struct davinci_nand_info { uint32_t mask_cle; uint32_t core_chipsel; + + struct davinci_aemif_timing *timing; }; static DEFINE_SPINLOCK(davinci_nand_lock); @@ -478,36 +481,6 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd) return davinci_nand_readl(info, NANDFSR_OFFSET) & BIT(0); } -static void __init nand_dm6446evm_flash_init(struct davinci_nand_info *info) -{ - uint32_t regval, a1cr; - - /* - * NAND FLASH timings @ PLL1 == 459 MHz - * - AEMIF.CLK freq = PLL1/6 = 459/6 = 76.5 MHz - * - AEMIF.CLK period = 1/76.5 MHz = 13.1 ns - */ - regval = 0 - | (0 << 31) /* selectStrobe */ - | (0 << 30) /* extWait (never with NAND) */ - | (1 << 26) /* writeSetup 10 ns */ - | (3 << 20) /* writeStrobe 40 ns */ - | (1 << 17) /* writeHold 10 ns */ - | (0 << 13) /* readSetup 10 ns */ - | (3 << 7) /* readStrobe 60 ns */ - | (0 << 4) /* readHold 10 ns */ - | (3 << 2) /* turnAround ?? ns */ - | (0 << 0) /* asyncSize 8-bit bus */ - ; - a1cr = davinci_nand_readl(info, A1CR_OFFSET); - if (a1cr != regval) { - dev_dbg(info->dev, "Warning: NAND config: Set A1CR " \ - "reg to 0x%08x, was 0x%08x, should be done by " \ - "bootloader.\n", regval, a1cr); - davinci_nand_writel(info, A1CR_OFFSET, regval); - } -} - /*----------------------------------------------------------------------*/ /* An ECC layout for using 4-bit ECC with small-page flash, storing @@ -611,6 +584,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.options = pdata->options; info->chip.bbt_td = pdata->bbt_td; info->chip.bbt_md = pdata->bbt_md; + info->timing = pdata->timing; info->ioaddr = (uint32_t __force) vaddr; @@ -688,15 +662,25 @@ static int __init nand_davinci_probe(struct platform_device *pdev) goto err_clk_enable; } - /* EMIF timings should normally be set by the boot loader, - * especially after boot-from-NAND. The *only* reason to - * have this special casing for the DM6446 EVM is to work - * with boot-from-NOR ... with CS0 manually re-jumpered - * (after startup) so it addresses the NAND flash, not NOR. - * Even for dev boards, that's unusually rude... + /* + * Setup Async configuration register in case we did not boot from + * NAND and so bootloader did not bother to set it up. */ - if (machine_is_davinci_evm()) - nand_dm6446evm_flash_init(info); + val = davinci_nand_readl(info, A1CR_OFFSET + info->core_chipsel * 4); + + /* Extended Wait is not valid and Select Strobe mode is not used */ + val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK); + if (info->chip.options & NAND_BUSWIDTH_16) + val |= 0x1; + + davinci_nand_writel(info, A1CR_OFFSET + info->core_chipsel * 4, val); + + ret = davinci_aemif_setup_timing(info->timing, info->base, + info->core_chipsel); + if (ret < 0) { + dev_dbg(&pdev->dev, "NAND timing values setup fail\n"); + goto err_timing; + } spin_lock_irq(&davinci_nand_lock); @@ -809,6 +793,7 @@ syndrome_done: return 0; err_scan: +err_timing: clk_disable(info->clk); err_clk_enable: diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 133d51528f8d..513e0a76a4a7 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -413,7 +413,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT); } while (prefetch_status); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(); + gpmc_prefetch_reset(info->gpmc_cs); dma_unmap_single(&info->pdev->dev, dma_addr, len, dir); return 0; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2cc81a54cbf3..a92e3ba68494 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -951,6 +951,8 @@ config NET_NETX config TI_DAVINCI_EMAC tristate "TI DaVinci EMAC Support" depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + select TI_DAVINCI_MDIO + select TI_DAVINCI_CPDMA select PHYLIB help This driver supports TI's DaVinci Ethernet . @@ -958,6 +960,25 @@ config TI_DAVINCI_EMAC To compile this driver as a module, choose M here: the module will be called davinci_emac_driver. This is recommended. +config TI_DAVINCI_MDIO + tristate "TI DaVinci MDIO Support" + depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + select PHYLIB + help + This driver supports TI's DaVinci MDIO module. + + To compile this driver as a module, choose M here: the module + will be called davinci_mdio. This is recommended. + +config TI_DAVINCI_CPDMA + tristate "TI DaVinci CPDMA Support" + depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + help + This driver supports TI's DaVinci CPDMA dma engine. + + To compile this driver as a module, choose M here: the module + will be called davinci_cpdma. This is recommended. + config DM9000 tristate "DM9000 support" depends on ARM || BLACKFIN || MIPS @@ -2428,7 +2449,7 @@ config UGETH_TX_ON_DEMAND config MV643XX_ETH tristate "Marvell Discovery (643XX) and Orion ethernet support" - depends on MV64X60 || PPC32 || PLAT_ORION + depends on (MV64X60 || PPC32 || PLAT_ORION) && INET select INET_LRO select PHYLIB help @@ -2803,7 +2824,7 @@ config NIU config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" - depends on PPC_PASEMI && PCI + depends on PPC_PASEMI && PCI && INET select PHYLIB select INET_LRO help diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 3e8f150c4b14..65da885a3c0c 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -7,6 +7,8 @@ obj-$(CONFIG_MDIO) += mdio.o obj-$(CONFIG_PHYLIB) += phy/ obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o +obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o +obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_E1000E) += e1000e/ diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3b16f62d5606..e953c6ad6e6d 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -5164,6 +5164,15 @@ int bond_create(struct net *net, const char *name) res = dev_alloc_name(bond_dev, "bond%d"); if (res < 0) goto out; + } else { + /* + * If we're given a name to register + * we need to ensure that its not already + * registered + */ + res = -EEXIST; + if (__dev_get_by_name(net, name) != NULL) + goto out; } res = register_netdevice(bond_dev); diff --git a/drivers/net/davinci_cpdma.c b/drivers/net/davinci_cpdma.c new file mode 100644 index 000000000000..e92b2b6cd8c4 --- /dev/null +++ b/drivers/net/davinci_cpdma.c @@ -0,0 +1,965 @@ +/* + * Texas Instruments CPDMA Driver + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> + +#include "davinci_cpdma.h" + +/* DMA Registers */ +#define CPDMA_TXIDVER 0x00 +#define CPDMA_TXCONTROL 0x04 +#define CPDMA_TXTEARDOWN 0x08 +#define CPDMA_RXIDVER 0x10 +#define CPDMA_RXCONTROL 0x14 +#define CPDMA_SOFTRESET 0x1c +#define CPDMA_RXTEARDOWN 0x18 +#define CPDMA_TXINTSTATRAW 0x80 +#define CPDMA_TXINTSTATMASKED 0x84 +#define CPDMA_TXINTMASKSET 0x88 +#define CPDMA_TXINTMASKCLEAR 0x8c +#define CPDMA_MACINVECTOR 0x90 +#define CPDMA_MACEOIVECTOR 0x94 +#define CPDMA_RXINTSTATRAW 0xa0 +#define CPDMA_RXINTSTATMASKED 0xa4 +#define CPDMA_RXINTMASKSET 0xa8 +#define CPDMA_RXINTMASKCLEAR 0xac +#define CPDMA_DMAINTSTATRAW 0xb0 +#define CPDMA_DMAINTSTATMASKED 0xb4 +#define CPDMA_DMAINTMASKSET 0xb8 +#define CPDMA_DMAINTMASKCLEAR 0xbc +#define CPDMA_DMAINT_HOSTERR BIT(1) + +/* the following exist only if has_ext_regs is set */ +#define CPDMA_DMACONTROL 0x20 +#define CPDMA_DMASTATUS 0x24 +#define CPDMA_RXBUFFOFS 0x28 +#define CPDMA_EM_CONTROL 0x2c + +/* Descriptor mode bits */ +#define CPDMA_DESC_SOP BIT(31) +#define CPDMA_DESC_EOP BIT(30) +#define CPDMA_DESC_OWNER BIT(29) +#define CPDMA_DESC_EOQ BIT(28) +#define CPDMA_DESC_TD_COMPLETE BIT(27) +#define CPDMA_DESC_PASS_CRC BIT(26) + +#define CPDMA_TEARDOWN_VALUE 0xfffffffc + +struct cpdma_desc { + /* hardware fields */ + u32 hw_next; + u32 hw_buffer; + u32 hw_len; + u32 hw_mode; + /* software fields */ + void *sw_token; + u32 sw_buffer; + u32 sw_len; +}; + +struct cpdma_desc_pool { + u32 phys; + void __iomem *iomap; /* ioremap map */ + void *cpumap; /* dma_alloc map */ + int desc_size, mem_size; + int num_desc, used_desc; + unsigned long *bitmap; + struct device *dev; + spinlock_t lock; +}; + +enum cpdma_state { + CPDMA_STATE_IDLE, + CPDMA_STATE_ACTIVE, + CPDMA_STATE_TEARDOWN, +}; + +const char *cpdma_state_str[] = { "idle", "active", "teardown" }; + +struct cpdma_ctlr { + enum cpdma_state state; + struct cpdma_params params; + struct device *dev; + struct cpdma_desc_pool *pool; + spinlock_t lock; + struct cpdma_chan *channels[2 * CPDMA_MAX_CHANNELS]; +}; + +struct cpdma_chan { + enum cpdma_state state; + struct cpdma_ctlr *ctlr; + int chan_num; + spinlock_t lock; + struct cpdma_desc __iomem *head, *tail; + int count; + void __iomem *hdp, *cp, *rxfree; + u32 mask; + cpdma_handler_fn handler; + enum dma_data_direction dir; + struct cpdma_chan_stats stats; + /* offsets into dmaregs */ + int int_set, int_clear, td; +}; + +/* The following make access to common cpdma_ctlr params more readable */ +#define dmaregs params.dmaregs +#define num_chan params.num_chan + +/* various accessors */ +#define dma_reg_read(ctlr, ofs) __raw_readl((ctlr)->dmaregs + (ofs)) +#define chan_read(chan, fld) __raw_readl((chan)->fld) +#define desc_read(desc, fld) __raw_readl(&(desc)->fld) +#define dma_reg_write(ctlr, ofs, v) __raw_writel(v, (ctlr)->dmaregs + (ofs)) +#define chan_write(chan, fld, v) __raw_writel(v, (chan)->fld) +#define desc_write(desc, fld, v) __raw_writel((u32)(v), &(desc)->fld) + +/* + * Utility constructs for a cpdma descriptor pool. Some devices (e.g. davinci + * emac) have dedicated on-chip memory for these descriptors. Some other + * devices (e.g. cpsw switches) use plain old memory. Descriptor pools + * abstract out these details + */ +static struct cpdma_desc_pool * +cpdma_desc_pool_create(struct device *dev, u32 phys, int size, int align) +{ + int bitmap_size; + struct cpdma_desc_pool *pool; + + pool = kzalloc(sizeof(*pool), GFP_KERNEL); + if (!pool) + return NULL; + + spin_lock_init(&pool->lock); + + pool->dev = dev; + pool->mem_size = size; + pool->desc_size = ALIGN(sizeof(struct cpdma_desc), align); + pool->num_desc = size / pool->desc_size; + + bitmap_size = (pool->num_desc / BITS_PER_LONG) * sizeof(long); + pool->bitmap = kzalloc(bitmap_size, GFP_KERNEL); + if (!pool->bitmap) + goto fail; + + if (phys) { + pool->phys = phys; + pool->iomap = ioremap(phys, size); + } else { + pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys, + GFP_KERNEL); + pool->iomap = (void __force __iomem *)pool->cpumap; + } + + if (pool->iomap) + return pool; + +fail: + kfree(pool->bitmap); + kfree(pool); + return NULL; +} + +static void cpdma_desc_pool_destroy(struct cpdma_desc_pool *pool) +{ + unsigned long flags; + + if (!pool) + return; + + spin_lock_irqsave(&pool->lock, flags); + WARN_ON(pool->used_desc); + kfree(pool->bitmap); + if (pool->cpumap) { + dma_free_coherent(pool->dev, pool->mem_size, pool->cpumap, + pool->phys); + } else { + iounmap(pool->iomap); + } + spin_unlock_irqrestore(&pool->lock, flags); + kfree(pool); +} + +static inline dma_addr_t desc_phys(struct cpdma_desc_pool *pool, + struct cpdma_desc __iomem *desc) +{ + if (!desc) + return 0; + return pool->phys + (__force dma_addr_t)desc - + (__force dma_addr_t)pool->iomap; +} + +static inline struct cpdma_desc __iomem * +desc_from_phys(struct cpdma_desc_pool *pool, dma_addr_t dma) +{ + return dma ? pool->iomap + dma - pool->phys : NULL; +} + +static struct cpdma_desc __iomem * +cpdma_desc_alloc(struct cpdma_desc_pool *pool, int num_desc) +{ + unsigned long flags; + int index; + struct cpdma_desc __iomem *desc = NULL; + + spin_lock_irqsave(&pool->lock, flags); + + index = bitmap_find_next_zero_area(pool->bitmap, pool->num_desc, 0, + num_desc, 0); + if (index < pool->num_desc) { + bitmap_set(pool->bitmap, index, num_desc); + desc = pool->iomap + pool->desc_size * index; + pool->used_desc++; + } + + spin_unlock_irqrestore(&pool->lock, flags); + return desc; +} + +static void cpdma_desc_free(struct cpdma_desc_pool *pool, + struct cpdma_desc __iomem *desc, int num_desc) +{ + unsigned long flags, index; + + index = ((unsigned long)desc - (unsigned long)pool->iomap) / + pool->desc_size; + spin_lock_irqsave(&pool->lock, flags); + bitmap_clear(pool->bitmap, index, num_desc); + pool->used_desc--; + spin_unlock_irqrestore(&pool->lock, flags); +} + +struct cpdma_ctlr *cpdma_ctlr_create(struct cpdma_params *params) +{ + struct cpdma_ctlr *ctlr; + + ctlr = kzalloc(sizeof(*ctlr), GFP_KERNEL); + if (!ctlr) + return NULL; + + ctlr->state = CPDMA_STATE_IDLE; + ctlr->params = *params; + ctlr->dev = params->dev; + spin_lock_init(&ctlr->lock); + + ctlr->pool = cpdma_desc_pool_create(ctlr->dev, + ctlr->params.desc_mem_phys, + ctlr->params.desc_mem_size, + ctlr->params.desc_align); + if (!ctlr->pool) { + kfree(ctlr); + return NULL; + } + + if (WARN_ON(ctlr->num_chan > CPDMA_MAX_CHANNELS)) + ctlr->num_chan = CPDMA_MAX_CHANNELS; + return ctlr; +} + +int cpdma_ctlr_start(struct cpdma_ctlr *ctlr) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&ctlr->lock, flags); + if (ctlr->state != CPDMA_STATE_IDLE) { + spin_unlock_irqrestore(&ctlr->lock, flags); + return -EBUSY; + } + + if (ctlr->params.has_soft_reset) { + unsigned long timeout = jiffies + HZ/10; + + dma_reg_write(ctlr, CPDMA_SOFTRESET, 1); + while (time_before(jiffies, timeout)) { + if (dma_reg_read(ctlr, CPDMA_SOFTRESET) == 0) + break; + } + WARN_ON(!time_before(jiffies, timeout)); + } + + for (i = 0; i < ctlr->num_chan; i++) { + __raw_writel(0, ctlr->params.txhdp + 4 * i); + __raw_writel(0, ctlr->params.rxhdp + 4 * i); + __raw_writel(0, ctlr->params.txcp + 4 * i); + __raw_writel(0, ctlr->params.rxcp + 4 * i); + } + + dma_reg_write(ctlr, CPDMA_RXINTMASKCLEAR, 0xffffffff); + dma_reg_write(ctlr, CPDMA_TXINTMASKCLEAR, 0xffffffff); + + dma_reg_write(ctlr, CPDMA_TXCONTROL, 1); + dma_reg_write(ctlr, CPDMA_RXCONTROL, 1); + + ctlr->state = CPDMA_STATE_ACTIVE; + + for (i = 0; i < ARRAY_SIZE(ctlr->channels); i++) { + if (ctlr->channels[i]) + cpdma_chan_start(ctlr->channels[i]); + } + spin_unlock_irqrestore(&ctlr->lock, flags); + return 0; +} + +int cpdma_ctlr_stop(struct cpdma_ctlr *ctlr) +{ + unsigned long flags; + int i; + + spin_lock_irqsave(&ctlr->lock, flags); + if (ctlr->state != CPDMA_STATE_ACTIVE) { + spin_unlock_irqrestore(&ctlr->lock, flags); + return -EINVAL; + } + + ctlr->state = CPDMA_STATE_TEARDOWN; + + for (i = 0; i < ARRAY_SIZE(ctlr->channels); i++) { + if (ctlr->channels[i]) + cpdma_chan_stop(ctlr->channels[i]); + } + + dma_reg_write(ctlr, CPDMA_RXINTMASKCLEAR, 0xffffffff); + dma_reg_write(ctlr, CPDMA_TXINTMASKCLEAR, 0xffffffff); + + dma_reg_write(ctlr, CPDMA_TXCONTROL, 0); + dma_reg_write(ctlr, CPDMA_RXCONTROL, 0); + + ctlr->state = CPDMA_STATE_IDLE; + + spin_unlock_irqrestore(&ctlr->lock, flags); + return 0; +} + +int cpdma_ctlr_dump(struct cpdma_ctlr *ctlr) +{ + struct device *dev = ctlr->dev; + unsigned long flags; + int i; + + spin_lock_irqsave(&ctlr->lock, flags); + + dev_info(dev, "CPDMA: state: %s", cpdma_state_str[ctlr->state]); + + dev_info(dev, "CPDMA: txidver: %x", + dma_reg_read(ctlr, CPDMA_TXIDVER)); + dev_info(dev, "CPDMA: txcontrol: %x", + dma_reg_read(ctlr, CPDMA_TXCONTROL)); + dev_info(dev, "CPDMA: txteardown: %x", + dma_reg_read(ctlr, CPDMA_TXTEARDOWN)); + dev_info(dev, "CPDMA: rxidver: %x", + dma_reg_read(ctlr, CPDMA_RXIDVER)); + dev_info(dev, "CPDMA: rxcontrol: %x", + dma_reg_read(ctlr, CPDMA_RXCONTROL)); + dev_info(dev, "CPDMA: softreset: %x", + dma_reg_read(ctlr, CPDMA_SOFTRESET)); + dev_info(dev, "CPDMA: rxteardown: %x", + dma_reg_read(ctlr, CPDMA_RXTEARDOWN)); + dev_info(dev, "CPDMA: txintstatraw: %x", + dma_reg_read(ctlr, CPDMA_TXINTSTATRAW)); + dev_info(dev, "CPDMA: txintstatmasked: %x", + dma_reg_read(ctlr, CPDMA_TXINTSTATMASKED)); + dev_info(dev, "CPDMA: txintmaskset: %x", + dma_reg_read(ctlr, CPDMA_TXINTMASKSET)); + dev_info(dev, "CPDMA: txintmaskclear: %x", + dma_reg_read(ctlr, CPDMA_TXINTMASKCLEAR)); + dev_info(dev, "CPDMA: macinvector: %x", + dma_reg_read(ctlr, CPDMA_MACINVECTOR)); + dev_info(dev, "CPDMA: maceoivector: %x", + dma_reg_read(ctlr, CPDMA_MACEOIVECTOR)); + dev_info(dev, "CPDMA: rxintstatraw: %x", + dma_reg_read(ctlr, CPDMA_RXINTSTATRAW)); + dev_info(dev, "CPDMA: rxintstatmasked: %x", + dma_reg_read(ctlr, CPDMA_RXINTSTATMASKED)); + dev_info(dev, "CPDMA: rxintmaskset: %x", + dma_reg_read(ctlr, CPDMA_RXINTMASKSET)); + dev_info(dev, "CPDMA: rxintmaskclear: %x", + dma_reg_read(ctlr, CPDMA_RXINTMASKCLEAR)); + dev_info(dev, "CPDMA: dmaintstatraw: %x", + dma_reg_read(ctlr, CPDMA_DMAINTSTATRAW)); + dev_info(dev, "CPDMA: dmaintstatmasked: %x", + dma_reg_read(ctlr, CPDMA_DMAINTSTATMASKED)); + dev_info(dev, "CPDMA: dmaintmaskset: %x", + dma_reg_read(ctlr, CPDMA_DMAINTMASKSET)); + dev_info(dev, "CPDMA: dmaintmaskclear: %x", + dma_reg_read(ctlr, CPDMA_DMAINTMASKCLEAR)); + + if (!ctlr->params.has_ext_regs) { + dev_info(dev, "CPDMA: dmacontrol: %x", + dma_reg_read(ctlr, CPDMA_DMACONTROL)); + dev_info(dev, "CPDMA: dmastatus: %x", + dma_reg_read(ctlr, CPDMA_DMASTATUS)); + dev_info(dev, "CPDMA: rxbuffofs: %x", + dma_reg_read(ctlr, CPDMA_RXBUFFOFS)); + } + + for (i = 0; i < ARRAY_SIZE(ctlr->channels); i++) + if (ctlr->channels[i]) + cpdma_chan_dump(ctlr->channels[i]); + + spin_unlock_irqrestore(&ctlr->lock, flags); + return 0; +} + +int cpdma_ctlr_destroy(struct cpdma_ctlr *ctlr) +{ + unsigned long flags; + int ret = 0, i; + + if (!ctlr) + return -EINVAL; + + spin_lock_irqsave(&ctlr->lock, flags); + if (ctlr->state != CPDMA_STATE_IDLE) + cpdma_ctlr_stop(ctlr); + + for (i = 0; i < ARRAY_SIZE(ctlr->channels); i++) { + if (ctlr->channels[i]) + cpdma_chan_destroy(ctlr->channels[i]); + } + + cpdma_desc_pool_destroy(ctlr->pool); + spin_unlock_irqrestore(&ctlr->lock, flags); + kfree(ctlr); + return ret; +} + +int cpdma_ctlr_int_ctrl(struct cpdma_ctlr *ctlr, bool enable) +{ + unsigned long flags; + int i, reg; + + spin_lock_irqsave(&ctlr->lock, flags); + if (ctlr->state != CPDMA_STATE_ACTIVE) { + spin_unlock_irqrestore(&ctlr->lock, flags); + return -EINVAL; + } + + reg = enable ? CPDMA_DMAINTMASKSET : CPDMA_DMAINTMASKCLEAR; + dma_reg_write(ctlr, reg, CPDMA_DMAINT_HOSTERR); + + for (i = 0; i < ARRAY_SIZE(ctlr->channels); i++) { + if (ctlr->channels[i]) + cpdma_chan_int_ctrl(ctlr->channels[i], enable); + } + + spin_unlock_irqrestore(&ctlr->lock, flags); + return 0; +} + +void cpdma_ctlr_eoi(struct cpdma_ctlr *ctlr) +{ + dma_reg_write(ctlr, CPDMA_MACEOIVECTOR, 0); +} + +struct cpdma_chan *cpdma_chan_create(struct cpdma_ctlr *ctlr, int chan_num, + cpdma_handler_fn handler) +{ + struct cpdma_chan *chan; + int ret, offset = (chan_num % CPDMA_MAX_CHANNELS) * 4; + unsigned long flags; + + if (__chan_linear(chan_num) >= ctlr->num_chan) + return NULL; + + ret = -ENOMEM; + chan = kzalloc(sizeof(*chan), GFP_KERNEL); + if (!chan) + goto err_chan_alloc; + + spin_lock_irqsave(&ctlr->lock, flags); + ret = -EBUSY; + if (ctlr->channels[chan_num]) + goto err_chan_busy; + + chan->ctlr = ctlr; + chan->state = CPDMA_STATE_IDLE; + chan->chan_num = chan_num; + chan->handler = handler; + + if (is_rx_chan(chan)) { + chan->hdp = ctlr->params.rxhdp + offset; + chan->cp = ctlr->params.rxcp + offset; + chan->rxfree = ctlr->params.rxfree + offset; + chan->int_set = CPDMA_RXINTMASKSET; + chan->int_clear = CPDMA_RXINTMASKCLEAR; + chan->td = CPDMA_RXTEARDOWN; + chan->dir = DMA_FROM_DEVICE; + } else { + chan->hdp = ctlr->params.txhdp + offset; + chan->cp = ctlr->params.txcp + offset; + chan->int_set = CPDMA_TXINTMASKSET; + chan->int_clear = CPDMA_TXINTMASKCLEAR; + chan->td = CPDMA_TXTEARDOWN; + chan->dir = DMA_TO_DEVICE; + } + chan->mask = BIT(chan_linear(chan)); + + spin_lock_init(&chan->lock); + + ctlr->channels[chan_num] = chan; + spin_unlock_irqrestore(&ctlr->lock, flags); + return chan; + +err_chan_busy: + spin_unlock_irqrestore(&ctlr->lock, flags); + kfree(chan); +err_chan_alloc: + return ERR_PTR(ret); +} + +int cpdma_chan_destroy(struct cpdma_chan *chan) +{ + struct cpdma_ctlr *ctlr = chan->ctlr; + unsigned long flags; + + if (!chan) + return -EINVAL; + + spin_lock_irqsave(&ctlr->lock, flags); + if (chan->state != CPDMA_STATE_IDLE) + cpdma_chan_stop(chan); + ctlr->channels[chan->chan_num] = NULL; + spin_unlock_irqrestore(&ctlr->lock, flags); + kfree(chan); + return 0; +} + +int cpdma_chan_get_stats(struct cpdma_chan *chan, + struct cpdma_chan_stats *stats) +{ + unsigned long flags; + if (!chan) + return -EINVAL; + spin_lock_irqsave(&chan->lock, flags); + memcpy(stats, &chan->stats, sizeof(*stats)); + spin_unlock_irqrestore(&chan->lock, flags); + return 0; +} + +int cpdma_chan_dump(struct cpdma_chan *chan) +{ + unsigned long flags; + struct device *dev = chan->ctlr->dev; + + spin_lock_irqsave(&chan->lock, flags); + + dev_info(dev, "channel %d (%s %d) state %s", + chan->chan_num, is_rx_chan(chan) ? "rx" : "tx", + chan_linear(chan), cpdma_state_str[chan->state]); + dev_info(dev, "\thdp: %x\n", chan_read(chan, hdp)); + dev_info(dev, "\tcp: %x\n", chan_read(chan, cp)); + if (chan->rxfree) { + dev_info(dev, "\trxfree: %x\n", + chan_read(chan, rxfree)); + } + + dev_info(dev, "\tstats head_enqueue: %d\n", + chan->stats.head_enqueue); + dev_info(dev, "\tstats tail_enqueue: %d\n", + chan->stats.tail_enqueue); + dev_info(dev, "\tstats pad_enqueue: %d\n", + chan->stats.pad_enqueue); + dev_info(dev, "\tstats misqueued: %d\n", + chan->stats.misqueued); + dev_info(dev, "\tstats desc_alloc_fail: %d\n", + chan->stats.desc_alloc_fail); + dev_info(dev, "\tstats pad_alloc_fail: %d\n", + chan->stats.pad_alloc_fail); + dev_info(dev, "\tstats runt_receive_buff: %d\n", + chan->stats.runt_receive_buff); + dev_info(dev, "\tstats runt_transmit_buff: %d\n", + chan->stats.runt_transmit_buff); + dev_info(dev, "\tstats empty_dequeue: %d\n", + chan->stats.empty_dequeue); + dev_info(dev, "\tstats busy_dequeue: %d\n", + chan->stats.busy_dequeue); + dev_info(dev, "\tstats good_dequeue: %d\n", + chan->stats.good_dequeue); + dev_info(dev, "\tstats requeue: %d\n", + chan->stats.requeue); + dev_info(dev, "\tstats teardown_dequeue: %d\n", + chan->stats.teardown_dequeue); + + spin_unlock_irqrestore(&chan->lock, flags); + return 0; +} + +static void __cpdma_chan_submit(struct cpdma_chan *chan, + struct cpdma_desc __iomem *desc) +{ + struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_desc __iomem *prev = chan->tail; + struct cpdma_desc_pool *pool = ctlr->pool; + dma_addr_t desc_dma; + u32 mode; + + desc_dma = desc_phys(pool, desc); + + /* simple case - idle channel */ + if (!chan->head) { + chan->stats.head_enqueue++; + chan->head = desc; + chan->tail = desc; + if (chan->state == CPDMA_STATE_ACTIVE) + chan_write(chan, hdp, desc_dma); + return; + } + + /* first chain the descriptor at the tail of the list */ + desc_write(prev, hw_next, desc_dma); + chan->tail = desc; + chan->stats.tail_enqueue++; + + /* next check if EOQ has been triggered already */ + mode = desc_read(prev, hw_mode); + if (((mode & (CPDMA_DESC_EOQ | CPDMA_DESC_OWNER)) == CPDMA_DESC_EOQ) && + (chan->state == CPDMA_STATE_ACTIVE)) { + desc_write(prev, hw_mode, mode & ~CPDMA_DESC_EOQ); + chan_write(chan, hdp, desc_dma); + chan->stats.misqueued++; + } +} + +int cpdma_chan_submit(struct cpdma_chan *chan, void *token, void *data, + int len, gfp_t gfp_mask) +{ + struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_desc __iomem *desc; + dma_addr_t buffer; + unsigned long flags; + u32 mode; + int ret = 0; + + spin_lock_irqsave(&chan->lock, flags); + + if (chan->state == CPDMA_STATE_TEARDOWN) { + ret = -EINVAL; + goto unlock_ret; + } + + desc = cpdma_desc_alloc(ctlr->pool, 1); + if (!desc) { + chan->stats.desc_alloc_fail++; + ret = -ENOMEM; + goto unlock_ret; + } + + if (len < ctlr->params.min_packet_size) { + len = ctlr->params.min_packet_size; + chan->stats.runt_transmit_buff++; + } + + buffer = dma_map_single(ctlr->dev, data, len, chan->dir); + mode = CPDMA_DESC_OWNER | CPDMA_DESC_SOP | CPDMA_DESC_EOP; + + desc_write(desc, hw_next, 0); + desc_write(desc, hw_buffer, buffer); + desc_write(desc, hw_len, len); + desc_write(desc, hw_mode, mode | len); + desc_write(desc, sw_token, token); + desc_write(desc, sw_buffer, buffer); + desc_write(desc, sw_len, len); + + __cpdma_chan_submit(chan, desc); + + if (chan->state == CPDMA_STATE_ACTIVE && chan->rxfree) + chan_write(chan, rxfree, 1); + + chan->count++; + +unlock_ret: + spin_unlock_irqrestore(&chan->lock, flags); + return ret; +} + +static void __cpdma_chan_free(struct cpdma_chan *chan, + struct cpdma_desc __iomem *desc, + int outlen, int status) +{ + struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_desc_pool *pool = ctlr->pool; + dma_addr_t buff_dma; + int origlen; + void *token; + + token = (void *)desc_read(desc, sw_token); + buff_dma = desc_read(desc, sw_buffer); + origlen = desc_read(desc, sw_len); + + dma_unmap_single(ctlr->dev, buff_dma, origlen, chan->dir); + cpdma_desc_free(pool, desc, 1); + (*chan->handler)(token, outlen, status); +} + +static int __cpdma_chan_process(struct cpdma_chan *chan) +{ + struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_desc __iomem *desc; + int status, outlen; + struct cpdma_desc_pool *pool = ctlr->pool; + dma_addr_t desc_dma; + unsigned long flags; + + spin_lock_irqsave(&chan->lock, flags); + + desc = chan->head; + if (!desc) { + chan->stats.empty_dequeue++; + status = -ENOENT; + goto unlock_ret; + } + desc_dma = desc_phys(pool, desc); + + status = __raw_readl(&desc->hw_mode); + outlen = status & 0x7ff; + if (status & CPDMA_DESC_OWNER) { + chan->stats.busy_dequeue++; + status = -EBUSY; + goto unlock_ret; + } + status = status & (CPDMA_DESC_EOQ | CPDMA_DESC_TD_COMPLETE); + + chan->head = desc_from_phys(pool, desc_read(desc, hw_next)); + chan_write(chan, cp, desc_dma); + chan->count--; + chan->stats.good_dequeue++; + + if (status & CPDMA_DESC_EOQ) { + chan->stats.requeue++; + chan_write(chan, hdp, desc_phys(pool, chan->head)); + } + + spin_unlock_irqrestore(&chan->lock, flags); + + __cpdma_chan_free(chan, desc, outlen, status); + return status; + +unlock_ret: + spin_unlock_irqrestore(&chan->lock, flags); + return status; +} + +int cpdma_chan_process(struct cpdma_chan *chan, int quota) +{ + int used = 0, ret = 0; + + if (chan->state != CPDMA_STATE_ACTIVE) + return -EINVAL; + + while (used < quota) { + ret = __cpdma_chan_process(chan); + if (ret < 0) + break; + used++; + } + return used; +} + +int cpdma_chan_start(struct cpdma_chan *chan) +{ + struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_desc_pool *pool = ctlr->pool; + unsigned long flags; + + spin_lock_irqsave(&chan->lock, flags); + if (chan->state != CPDMA_STATE_IDLE) { + spin_unlock_irqrestore(&chan->lock, flags); + return -EBUSY; + } + if (ctlr->state != CPDMA_STATE_ACTIVE) { + spin_unlock_irqrestore(&chan->lock, flags); + return -EINVAL; + } + dma_reg_write(ctlr, chan->int_set, chan->mask); + chan->state = CPDMA_STATE_ACTIVE; + if (chan->head) { + chan_write(chan, hdp, desc_phys(pool, chan->head)); + if (chan->rxfree) + chan_write(chan, rxfree, chan->count); + } + + spin_unlock_irqrestore(&chan->lock, flags); + return 0; +} + +int cpdma_chan_stop(struct cpdma_chan *chan) +{ + struct cpdma_ctlr *ctlr = chan->ctlr; + struct cpdma_desc_pool *pool = ctlr->pool; + unsigned long flags; + int ret; + unsigned long timeout; + + spin_lock_irqsave(&chan->lock, flags); + if (chan->state != CPDMA_STATE_ACTIVE) { + spin_unlock_irqrestore(&chan->lock, flags); + return -EINVAL; + } + + chan->state = CPDMA_STATE_TEARDOWN; + dma_reg_write(ctlr, chan->int_clear, chan->mask); + + /* trigger teardown */ + dma_reg_write(ctlr, chan->td, chan->chan_num); + + /* wait for teardown complete */ + timeout = jiffies + HZ/10; /* 100 msec */ + while (time_before(jiffies, timeout)) { + u32 cp = chan_read(chan, cp); + if ((cp & CPDMA_TEARDOWN_VALUE) == CPDMA_TEARDOWN_VALUE) + break; + cpu_relax(); + } + WARN_ON(!time_before(jiffies, timeout)); + chan_write(chan, cp, CPDMA_TEARDOWN_VALUE); + + /* handle completed packets */ + do { + ret = __cpdma_chan_process(chan); + if (ret < 0) + break; + } while ((ret & CPDMA_DESC_TD_COMPLETE) == 0); + + /* remaining packets haven't been tx/rx'ed, clean them up */ + while (chan->head) { + struct cpdma_desc __iomem *desc = chan->head; + dma_addr_t next_dma; + + next_dma = desc_read(desc, hw_next); + chan->head = desc_from_phys(pool, next_dma); + chan->stats.teardown_dequeue++; + + /* issue callback without locks held */ + spin_unlock_irqrestore(&chan->lock, flags); + __cpdma_chan_free(chan, desc, 0, -ENOSYS); + spin_lock_irqsave(&chan->lock, flags); + } + + chan->state = CPDMA_STATE_IDLE; + spin_unlock_irqrestore(&chan->lock, flags); + return 0; +} + +int cpdma_chan_int_ctrl(struct cpdma_chan *chan, bool enable) +{ + unsigned long flags; + + spin_lock_irqsave(&chan->lock, flags); + if (chan->state != CPDMA_STATE_ACTIVE) { + spin_unlock_irqrestore(&chan->lock, flags); + return -EINVAL; + } + + dma_reg_write(chan->ctlr, enable ? chan->int_set : chan->int_clear, + chan->mask); + spin_unlock_irqrestore(&chan->lock, flags); + + return 0; +} + +struct cpdma_control_info { + u32 reg; + u32 shift, mask; + int access; +#define ACCESS_RO BIT(0) +#define ACCESS_WO BIT(1) +#define ACCESS_RW (ACCESS_RO | ACCESS_WO) +}; + +struct cpdma_control_info controls[] = { + [CPDMA_CMD_IDLE] = {CPDMA_DMACONTROL, 3, 1, ACCESS_WO}, + [CPDMA_COPY_ERROR_FRAMES] = {CPDMA_DMACONTROL, 4, 1, ACCESS_RW}, + [CPDMA_RX_OFF_LEN_UPDATE] = {CPDMA_DMACONTROL, 2, 1, ACCESS_RW}, + [CPDMA_RX_OWNERSHIP_FLIP] = {CPDMA_DMACONTROL, 1, 1, ACCESS_RW}, + [CPDMA_TX_PRIO_FIXED] = {CPDMA_DMACONTROL, 0, 1, ACCESS_RW}, + [CPDMA_STAT_IDLE] = {CPDMA_DMASTATUS, 31, 1, ACCESS_RO}, + [CPDMA_STAT_TX_ERR_CODE] = {CPDMA_DMASTATUS, 20, 0xf, ACCESS_RW}, + [CPDMA_STAT_TX_ERR_CHAN] = {CPDMA_DMASTATUS, 16, 0x7, ACCESS_RW}, + [CPDMA_STAT_RX_ERR_CODE] = {CPDMA_DMASTATUS, 12, 0xf, ACCESS_RW}, + [CPDMA_STAT_RX_ERR_CHAN] = {CPDMA_DMASTATUS, 8, 0x7, ACCESS_RW}, + [CPDMA_RX_BUFFER_OFFSET] = {CPDMA_RXBUFFOFS, 0, 0xffff, ACCESS_RW}, +}; + +int cpdma_control_get(struct cpdma_ctlr *ctlr, int control) +{ + unsigned long flags; + struct cpdma_control_info *info = &controls[control]; + int ret; + + spin_lock_irqsave(&ctlr->lock, flags); + + ret = -ENOTSUPP; + if (!ctlr->params.has_ext_regs) + goto unlock_ret; + + ret = -EINVAL; + if (ctlr->state != CPDMA_STATE_ACTIVE) + goto unlock_ret; + + ret = -ENOENT; + if (control < 0 || control >= ARRAY_SIZE(controls)) + goto unlock_ret; + + ret = -EPERM; + if ((info->access & ACCESS_RO) != ACCESS_RO) + goto unlock_ret; + + ret = (dma_reg_read(ctlr, info->reg) >> info->shift) & info->mask; + +unlock_ret: + spin_unlock_irqrestore(&ctlr->lock, flags); + return ret; +} + +int cpdma_control_set(struct cpdma_ctlr *ctlr, int control, int value) +{ + unsigned long flags; + struct cpdma_control_info *info = &controls[control]; + int ret; + u32 val; + + spin_lock_irqsave(&ctlr->lock, flags); + + ret = -ENOTSUPP; + if (!ctlr->params.has_ext_regs) + goto unlock_ret; + + ret = -EINVAL; + if (ctlr->state != CPDMA_STATE_ACTIVE) + goto unlock_ret; + + ret = -ENOENT; + if (control < 0 || control >= ARRAY_SIZE(controls)) + goto unlock_ret; + + ret = -EPERM; + if ((info->access & ACCESS_WO) != ACCESS_WO) + goto unlock_ret; + + val = dma_reg_read(ctlr, info->reg); + val &= ~(info->mask << info->shift); + val |= (value & info->mask) << info->shift; + dma_reg_write(ctlr, info->reg, val); + ret = 0; + +unlock_ret: + spin_unlock_irqrestore(&ctlr->lock, flags); + return ret; +} diff --git a/drivers/net/davinci_cpdma.h b/drivers/net/davinci_cpdma.h new file mode 100644 index 000000000000..868e50ebde45 --- /dev/null +++ b/drivers/net/davinci_cpdma.h @@ -0,0 +1,108 @@ +/* + * Texas Instruments CPDMA Driver + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __DAVINCI_CPDMA_H__ +#define __DAVINCI_CPDMA_H__ + +#define CPDMA_MAX_CHANNELS BITS_PER_LONG + +#define tx_chan_num(chan) (chan) +#define rx_chan_num(chan) ((chan) + CPDMA_MAX_CHANNELS) +#define is_rx_chan(chan) ((chan)->chan_num >= CPDMA_MAX_CHANNELS) +#define is_tx_chan(chan) (!is_rx_chan(chan)) +#define __chan_linear(chan_num) ((chan_num) & (CPDMA_MAX_CHANNELS - 1)) +#define chan_linear(chan) __chan_linear((chan)->chan_num) + +struct cpdma_params { + struct device *dev; + void __iomem *dmaregs; + void __iomem *txhdp, *rxhdp, *txcp, *rxcp; + void __iomem *rxthresh, *rxfree; + int num_chan; + bool has_soft_reset; + int min_packet_size; + u32 desc_mem_phys; + int desc_mem_size; + int desc_align; + + /* + * Some instances of embedded cpdma controllers have extra control and + * status registers. The following flag enables access to these + * "extended" registers. + */ + bool has_ext_regs; +}; + +struct cpdma_chan_stats { + u32 head_enqueue; + u32 tail_enqueue; + u32 pad_enqueue; + u32 misqueued; + u32 desc_alloc_fail; + u32 pad_alloc_fail; + u32 runt_receive_buff; + u32 runt_transmit_buff; + u32 empty_dequeue; + u32 busy_dequeue; + u32 good_dequeue; + u32 requeue; + u32 teardown_dequeue; +}; + +struct cpdma_ctlr; +struct cpdma_chan; + +typedef void (*cpdma_handler_fn)(void *token, int len, int status); + +struct cpdma_ctlr *cpdma_ctlr_create(struct cpdma_params *params); +int cpdma_ctlr_destroy(struct cpdma_ctlr *ctlr); +int cpdma_ctlr_start(struct cpdma_ctlr *ctlr); +int cpdma_ctlr_stop(struct cpdma_ctlr *ctlr); +int cpdma_ctlr_dump(struct cpdma_ctlr *ctlr); + +struct cpdma_chan *cpdma_chan_create(struct cpdma_ctlr *ctlr, int chan_num, + cpdma_handler_fn handler); +int cpdma_chan_destroy(struct cpdma_chan *chan); +int cpdma_chan_start(struct cpdma_chan *chan); +int cpdma_chan_stop(struct cpdma_chan *chan); +int cpdma_chan_dump(struct cpdma_chan *chan); + +int cpdma_chan_get_stats(struct cpdma_chan *chan, + struct cpdma_chan_stats *stats); +int cpdma_chan_submit(struct cpdma_chan *chan, void *token, void *data, + int len, gfp_t gfp_mask); +int cpdma_chan_process(struct cpdma_chan *chan, int quota); + +int cpdma_ctlr_int_ctrl(struct cpdma_ctlr *ctlr, bool enable); +void cpdma_ctlr_eoi(struct cpdma_ctlr *ctlr); +int cpdma_chan_int_ctrl(struct cpdma_chan *chan, bool enable); + +enum cpdma_control { + CPDMA_CMD_IDLE, /* write-only */ + CPDMA_COPY_ERROR_FRAMES, /* read-write */ + CPDMA_RX_OFF_LEN_UPDATE, /* read-write */ + CPDMA_RX_OWNERSHIP_FLIP, /* read-write */ + CPDMA_TX_PRIO_FIXED, /* read-write */ + CPDMA_STAT_IDLE, /* read-only */ + CPDMA_STAT_TX_ERR_CHAN, /* read-only */ + CPDMA_STAT_TX_ERR_CODE, /* read-only */ + CPDMA_STAT_RX_ERR_CHAN, /* read-only */ + CPDMA_STAT_RX_ERR_CODE, /* read-only */ + CPDMA_RX_BUFFER_OFFSET, /* read-write */ +}; + +int cpdma_control_get(struct cpdma_ctlr *ctlr, int control); +int cpdma_control_set(struct cpdma_ctlr *ctlr, int control, int value); + +#endif diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 7fbd052ddb0a..2a628d17d178 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -63,6 +63,8 @@ #include <asm/irq.h> #include <asm/page.h> +#include "davinci_cpdma.h" + static int debug_level; module_param(debug_level, int, 0); MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)"); @@ -113,7 +115,7 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4) #define EMAC_DEF_TX_CH (0) /* Default 0th channel */ #define EMAC_DEF_RX_CH (0) /* Default 0th channel */ -#define EMAC_DEF_MDIO_TICK_MS (10) /* typically 1 tick=1 ms) */ +#define EMAC_DEF_RX_NUM_DESC (128) #define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */ #define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */ #define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */ @@ -125,7 +127,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; /* EMAC register related defines */ #define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF) #define EMAC_NUM_MULTICAST_BITS (64) -#define EMAC_TEARDOWN_VALUE (0xFFFFFFFC) #define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1) #define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1) #define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2) @@ -212,24 +213,10 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */ /* EMAC Peripheral Device Register Memory Layout structure */ -#define EMAC_TXIDVER 0x0 -#define EMAC_TXCONTROL 0x4 -#define EMAC_TXTEARDOWN 0x8 -#define EMAC_RXIDVER 0x10 -#define EMAC_RXCONTROL 0x14 -#define EMAC_RXTEARDOWN 0x18 -#define EMAC_TXINTSTATRAW 0x80 -#define EMAC_TXINTSTATMASKED 0x84 -#define EMAC_TXINTMASKSET 0x88 -#define EMAC_TXINTMASKCLEAR 0x8C #define EMAC_MACINVECTOR 0x90 #define EMAC_DM646X_MACEOIVECTOR 0x94 -#define EMAC_RXINTSTATRAW 0xA0 -#define EMAC_RXINTSTATMASKED 0xA4 -#define EMAC_RXINTMASKSET 0xA8 -#define EMAC_RXINTMASKCLEAR 0xAC #define EMAC_MACINTSTATRAW 0xB0 #define EMAC_MACINTSTATMASKED 0xB4 #define EMAC_MACINTMASKSET 0xB8 @@ -256,12 +243,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_MACADDRHI 0x504 #define EMAC_MACINDEX 0x508 -/* EMAC HDP and Completion registors */ -#define EMAC_TXHDP(ch) (0x600 + (ch * 4)) -#define EMAC_RXHDP(ch) (0x620 + (ch * 4)) -#define EMAC_TXCP(ch) (0x640 + (ch * 4)) -#define EMAC_RXCP(ch) (0x660 + (ch * 4)) - /* EMAC statistics registers */ #define EMAC_RXGOODFRAMES 0x200 #define EMAC_RXBCASTFRAMES 0x204 @@ -303,25 +284,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_DM644X_INTMIN_INTVL 0x1 #define EMAC_DM644X_INTMAX_INTVL (EMAC_DM644X_EWINTCNT_MASK) -/* EMAC MDIO related */ -/* Mask & Control defines */ -#define MDIO_CONTROL_CLKDIV (0xFF) -#define MDIO_CONTROL_ENABLE BIT(30) -#define MDIO_USERACCESS_GO BIT(31) -#define MDIO_USERACCESS_WRITE BIT(30) -#define MDIO_USERACCESS_READ (0) -#define MDIO_USERACCESS_REGADR (0x1F << 21) -#define MDIO_USERACCESS_PHYADR (0x1F << 16) -#define MDIO_USERACCESS_DATA (0xFFFF) -#define MDIO_USERPHYSEL_LINKSEL BIT(7) -#define MDIO_VER_MODID (0xFFFF << 16) -#define MDIO_VER_REVMAJ (0xFF << 8) -#define MDIO_VER_REVMIN (0xFF) - -#define MDIO_USERACCESS(inst) (0x80 + (inst * 8)) -#define MDIO_USERPHYSEL(inst) (0x84 + (inst * 8)) -#define MDIO_CONTROL (0x04) - /* EMAC DM646X control module registers */ #define EMAC_DM646X_CMINTCTRL 0x0C #define EMAC_DM646X_CMRXINTEN 0x14 @@ -345,120 +307,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; /* EMAC Stats Clear Mask */ #define EMAC_STATS_CLR_MASK (0xFFFFFFFF) -/** net_buf_obj: EMAC network bufferdata structure - * - * EMAC network buffer data structure - */ -struct emac_netbufobj { - void *buf_token; - char *data_ptr; - int length; -}; - -/** net_pkt_obj: EMAC network packet data structure - * - * EMAC network packet data structure - supports buffer list (for future) - */ -struct emac_netpktobj { - void *pkt_token; /* data token may hold tx/rx chan id */ - struct emac_netbufobj *buf_list; /* array of network buffer objects */ - int num_bufs; - int pkt_length; -}; - -/** emac_tx_bd: EMAC TX Buffer descriptor data structure - * - * EMAC TX Buffer descriptor data structure - */ -struct emac_tx_bd { - int h_next; - int buff_ptr; - int off_b_len; - int mode; /* SOP, EOP, ownership, EOQ, teardown,Qstarv, length */ - struct emac_tx_bd __iomem *next; - void *buf_token; -}; - -/** emac_txch: EMAC TX Channel data structure - * - * EMAC TX Channel data structure - */ -struct emac_txch { - /* Config related */ - u32 num_bd; - u32 service_max; - - /* CPPI specific */ - u32 alloc_size; - void __iomem *bd_mem; - struct emac_tx_bd __iomem *bd_pool_head; - struct emac_tx_bd __iomem *active_queue_head; - struct emac_tx_bd __iomem *active_queue_tail; - struct emac_tx_bd __iomem *last_hw_bdprocessed; - u32 queue_active; - u32 teardown_pending; - u32 *tx_complete; - - /** statistics */ - u32 proc_count; /* TX: # of times emac_tx_bdproc is called */ - u32 mis_queued_packets; - u32 queue_reinit; - u32 end_of_queue_add; - u32 out_of_tx_bd; - u32 no_active_pkts; /* IRQ when there were no packets to process */ - u32 active_queue_count; -}; - -/** emac_rx_bd: EMAC RX Buffer descriptor data structure - * - * EMAC RX Buffer descriptor data structure - */ -struct emac_rx_bd { - int h_next; - int buff_ptr; - int off_b_len; - int mode; - struct emac_rx_bd __iomem *next; - void *data_ptr; - void *buf_token; -}; - -/** emac_rxch: EMAC RX Channel data structure - * - * EMAC RX Channel data structure - */ -struct emac_rxch { - /* configuration info */ - u32 num_bd; - u32 service_max; - u32 buf_size; - char mac_addr[6]; - - /** CPPI specific */ - u32 alloc_size; - void __iomem *bd_mem; - struct emac_rx_bd __iomem *bd_pool_head; - struct emac_rx_bd __iomem *active_queue_head; - struct emac_rx_bd __iomem *active_queue_tail; - u32 queue_active; - u32 teardown_pending; - - /* packet and buffer objects */ - struct emac_netpktobj pkt_queue; - struct emac_netbufobj buf_queue; - - /** statistics */ - u32 proc_count; /* number of times emac_rx_bdproc is called */ - u32 processed_bd; - u32 recycled_bd; - u32 out_of_rx_bd; - u32 out_of_rx_buffers; - u32 queue_reinit; - u32 end_of_queue_add; - u32 end_of_queue; - u32 mis_queued_packets; -}; - /* emac_priv: EMAC private data structure * * EMAC adapter private data structure @@ -469,17 +317,13 @@ struct emac_priv { struct platform_device *pdev; struct napi_struct napi; char mac_addr[6]; - spinlock_t tx_lock; - spinlock_t rx_lock; void __iomem *remap_addr; u32 emac_base_phys; void __iomem *emac_base; void __iomem *ctrl_base; - void __iomem *emac_ctrl_ram; - u32 ctrl_ram_size; - u32 hw_ram_addr; - struct emac_txch *txch[EMAC_DEF_MAX_TX_CH]; - struct emac_rxch *rxch[EMAC_DEF_MAX_RX_CH]; + struct cpdma_ctlr *dma; + struct cpdma_chan *txchan; + struct cpdma_chan *rxchan; u32 link; /* 1=link on, 0=link off */ u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */ u32 duplex; /* Link duplex: 0=Half, 1=Full */ @@ -493,13 +337,7 @@ struct emac_priv { u32 mac_hash2; u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS]; u32 rx_addr_type; - /* periodic timer required for MDIO polling */ - struct timer_list periodic_timer; - u32 periodic_ticks; - u32 timer_active; - u32 phy_mask; - /* mii_bus,phy members */ - struct mii_bus *mii_bus; + const char *phy_id; struct phy_device *phydev; spinlock_t lock; /*platform specific members*/ @@ -510,19 +348,6 @@ struct emac_priv { /* clock frequency for EMAC */ static struct clk *emac_clk; static unsigned long emac_bus_frequency; -static unsigned long mdio_max_freq; - -#define emac_virt_to_phys(addr, priv) \ - (((u32 __force)(addr) - (u32 __force)(priv->emac_ctrl_ram)) \ - + priv->hw_ram_addr) - -/* Cache macros - Packet buffers would be from skb pool which is cached */ -#define EMAC_VIRT_NOCACHE(addr) (addr) - -/* DM644x does not have BD's in cached memory - so no cache functions */ -#define BD_CACHE_INVALIDATE(addr, size) -#define BD_CACHE_WRITEBACK(addr, size) -#define BD_CACHE_WRITEBACK_INVALIDATE(addr, size) /* EMAC TX Host Error description strings */ static char *emac_txhost_errcodes[16] = { @@ -548,9 +373,6 @@ static char *emac_rxhost_errcodes[16] = { #define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg))) #define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg))) -#define emac_mdio_read(reg) ioread32(bus->priv + (reg)) -#define emac_mdio_write(reg, val) iowrite32(val, (bus->priv + (reg))) - /** * emac_dump_regs: Dump important EMAC registers to debug terminal * @priv: The DaVinci EMAC private adapter structure @@ -569,20 +391,6 @@ static void emac_dump_regs(struct emac_priv *priv) emac_ctrl_read(EMAC_CTRL_EWCTL), emac_ctrl_read(EMAC_CTRL_EWINTTCNT)); } - dev_info(emac_dev, "EMAC: TXID: %08X %s, RXID: %08X %s\n", - emac_read(EMAC_TXIDVER), - ((emac_read(EMAC_TXCONTROL)) ? "enabled" : "disabled"), - emac_read(EMAC_RXIDVER), - ((emac_read(EMAC_RXCONTROL)) ? "enabled" : "disabled")); - dev_info(emac_dev, "EMAC: TXIntRaw:%08X, TxIntMasked: %08X, "\ - "TxIntMasSet: %08X\n", emac_read(EMAC_TXINTSTATRAW), - emac_read(EMAC_TXINTSTATMASKED), emac_read(EMAC_TXINTMASKSET)); - dev_info(emac_dev, "EMAC: RXIntRaw:%08X, RxIntMasked: %08X, "\ - "RxIntMasSet: %08X\n", emac_read(EMAC_RXINTSTATRAW), - emac_read(EMAC_RXINTSTATMASKED), emac_read(EMAC_RXINTMASKSET)); - dev_info(emac_dev, "EMAC: MacIntRaw:%08X, MacIntMasked: %08X, "\ - "MacInVector=%08X\n", emac_read(EMAC_MACINTSTATRAW), - emac_read(EMAC_MACINTSTATMASKED), emac_read(EMAC_MACINVECTOR)); dev_info(emac_dev, "EMAC: EmuControl:%08X, FifoControl: %08X\n", emac_read(EMAC_EMCONTROL), emac_read(EMAC_FIFOCONTROL)); dev_info(emac_dev, "EMAC: MBPEnable:%08X, RXUnicastSet: %08X, "\ @@ -591,8 +399,6 @@ static void emac_dump_regs(struct emac_priv *priv) dev_info(emac_dev, "EMAC: MacControl:%08X, MacStatus: %08X, "\ "MacConfig=%08X\n", emac_read(EMAC_MACCONTROL), emac_read(EMAC_MACSTATUS), emac_read(EMAC_MACCONFIG)); - dev_info(emac_dev, "EMAC: TXHDP[0]:%08X, RXHDP[0]: %08X\n", - emac_read(EMAC_TXHDP(0)), emac_read(EMAC_RXHDP(0))); dev_info(emac_dev, "EMAC Statistics\n"); dev_info(emac_dev, "EMAC: rx_good_frames:%d\n", emac_read(EMAC_RXGOODFRAMES)); @@ -654,11 +460,10 @@ static void emac_dump_regs(struct emac_priv *priv) emac_read(EMAC_RXMOFOVERRUNS)); dev_info(emac_dev, "EMAC: rx_dma_overruns:%d\n", emac_read(EMAC_RXDMAOVERRUNS)); + + cpdma_ctlr_dump(priv->dma); } -/************************************************************************* - * EMAC MDIO/Phy Functionality - *************************************************************************/ /** * emac_get_drvinfo: Get EMAC driver information * @ndev: The DaVinci EMAC network adapter @@ -686,7 +491,7 @@ static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) { struct emac_priv *priv = netdev_priv(ndev); - if (priv->phy_mask) + if (priv->phydev) return phy_ethtool_gset(priv->phydev, ecmd); else return -EOPNOTSUPP; @@ -704,7 +509,7 @@ static int emac_get_settings(struct net_device *ndev, static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) { struct emac_priv *priv = netdev_priv(ndev); - if (priv->phy_mask) + if (priv->phydev) return phy_ethtool_sset(priv->phydev, ecmd); else return -EOPNOTSUPP; @@ -841,7 +646,7 @@ static void emac_update_phystatus(struct emac_priv *priv) mac_control = emac_read(EMAC_MACCONTROL); cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ? DUPLEX_FULL : DUPLEX_HALF; - if (priv->phy_mask) + if (priv->phydev) new_duplex = priv->phydev->duplex; else new_duplex = DUPLEX_FULL; @@ -1184,371 +989,68 @@ static irqreturn_t emac_irq(int irq, void *dev_id) return IRQ_HANDLED; } -/** EMAC on-chip buffer descriptor memory - * - * WARNING: Please note that the on chip memory is used for both TX and RX - * buffer descriptor queues and is equally divided between TX and RX desc's - * If the number of TX or RX descriptors change this memory pointers need - * to be adjusted. If external memory is allocated then these pointers can - * pointer to the memory - * - */ -#define EMAC_TX_BD_MEM(priv) ((priv)->emac_ctrl_ram) -#define EMAC_RX_BD_MEM(priv) ((priv)->emac_ctrl_ram + \ - (((priv)->ctrl_ram_size) >> 1)) - -/** - * emac_init_txch: TX channel initialization - * @priv: The DaVinci EMAC private adapter structure - * @ch: RX channel number - * - * Called during device init to setup a TX channel (allocate buffer desc - * create free pool and keep ready for transmission - * - * Returns success(0) or mem alloc failures error code - */ -static int emac_init_txch(struct emac_priv *priv, u32 ch) -{ - struct device *emac_dev = &priv->ndev->dev; - u32 cnt, bd_size; - void __iomem *mem; - struct emac_tx_bd __iomem *curr_bd; - struct emac_txch *txch = NULL; - - txch = kzalloc(sizeof(struct emac_txch), GFP_KERNEL); - if (NULL == txch) { - dev_err(emac_dev, "DaVinci EMAC: TX Ch mem alloc failed"); - return -ENOMEM; - } - priv->txch[ch] = txch; - txch->service_max = EMAC_DEF_TX_MAX_SERVICE; - txch->active_queue_head = NULL; - txch->active_queue_tail = NULL; - txch->queue_active = 0; - txch->teardown_pending = 0; - - /* allocate memory for TX CPPI channel on a 4 byte boundry */ - txch->tx_complete = kzalloc(txch->service_max * sizeof(u32), - GFP_KERNEL); - if (NULL == txch->tx_complete) { - dev_err(emac_dev, "DaVinci EMAC: Tx service mem alloc failed"); - kfree(txch); - return -ENOMEM; - } - - /* allocate buffer descriptor pool align every BD on four word - * boundry for future requirements */ - bd_size = (sizeof(struct emac_tx_bd) + 0xF) & ~0xF; - txch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size; - txch->alloc_size = (((bd_size * txch->num_bd) + 0xF) & ~0xF); - - /* alloc TX BD memory */ - txch->bd_mem = EMAC_TX_BD_MEM(priv); - __memzero((void __force *)txch->bd_mem, txch->alloc_size); - - /* initialize the BD linked list */ - mem = (void __force __iomem *) - (((u32 __force) txch->bd_mem + 0xF) & ~0xF); - txch->bd_pool_head = NULL; - for (cnt = 0; cnt < txch->num_bd; cnt++) { - curr_bd = mem + (cnt * bd_size); - curr_bd->next = txch->bd_pool_head; - txch->bd_pool_head = curr_bd; - } - - /* reset statistics counters */ - txch->out_of_tx_bd = 0; - txch->no_active_pkts = 0; - txch->active_queue_count = 0; - - return 0; -} - -/** - * emac_cleanup_txch: Book-keep function to clean TX channel resources - * @priv: The DaVinci EMAC private adapter structure - * @ch: TX channel number - * - * Called to clean up TX channel resources - * - */ -static void emac_cleanup_txch(struct emac_priv *priv, u32 ch) +static struct sk_buff *emac_rx_alloc(struct emac_priv *priv) { - struct emac_txch *txch = priv->txch[ch]; - - if (txch) { - if (txch->bd_mem) - txch->bd_mem = NULL; - kfree(txch->tx_complete); - kfree(txch); - priv->txch[ch] = NULL; - } + struct sk_buff *skb = dev_alloc_skb(priv->rx_buf_size); + if (WARN_ON(!skb)) + return NULL; + skb->dev = priv->ndev; + skb_reserve(skb, NET_IP_ALIGN); + return skb; } -/** - * emac_net_tx_complete: TX packet completion function - * @priv: The DaVinci EMAC private adapter structure - * @net_data_tokens: packet token - skb pointer - * @num_tokens: number of skb's to free - * @ch: TX channel number - * - * Frees the skb once packet is transmitted - * - */ -static int emac_net_tx_complete(struct emac_priv *priv, - void **net_data_tokens, - int num_tokens, u32 ch) +static void emac_rx_handler(void *token, int len, int status) { - struct net_device *ndev = priv->ndev; - u32 cnt; - - if (unlikely(num_tokens && netif_queue_stopped(ndev))) - netif_start_queue(ndev); - for (cnt = 0; cnt < num_tokens; cnt++) { - struct sk_buff *skb = (struct sk_buff *)net_data_tokens[cnt]; - if (skb == NULL) - continue; - ndev->stats.tx_packets++; - ndev->stats.tx_bytes += skb->len; + struct sk_buff *skb = token; + struct net_device *ndev = skb->dev; + struct emac_priv *priv = netdev_priv(ndev); + struct device *emac_dev = &ndev->dev; + int ret; + + /* free and bail if we are shutting down */ + if (unlikely(!netif_running(ndev))) { dev_kfree_skb_any(skb); + return; } - return 0; -} - -/** - * emac_txch_teardown: TX channel teardown - * @priv: The DaVinci EMAC private adapter structure - * @ch: TX channel number - * - * Called to teardown TX channel - * - */ -static void emac_txch_teardown(struct emac_priv *priv, u32 ch) -{ - struct device *emac_dev = &priv->ndev->dev; - u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */ - struct emac_txch *txch = priv->txch[ch]; - struct emac_tx_bd __iomem *curr_bd; - - while ((emac_read(EMAC_TXCP(ch)) & EMAC_TEARDOWN_VALUE) != - EMAC_TEARDOWN_VALUE) { - /* wait till tx teardown complete */ - cpu_relax(); /* TODO: check if this helps ... */ - --teardown_cnt; - if (0 == teardown_cnt) { - dev_err(emac_dev, "EMAC: TX teardown aborted\n"); - break; - } - } - emac_write(EMAC_TXCP(ch), EMAC_TEARDOWN_VALUE); - - /* process sent packets and return skb's to upper layer */ - if (1 == txch->queue_active) { - curr_bd = txch->active_queue_head; - while (curr_bd != NULL) { - dma_unmap_single(emac_dev, curr_bd->buff_ptr, - curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE, - DMA_TO_DEVICE); - - emac_net_tx_complete(priv, (void __force *) - &curr_bd->buf_token, 1, ch); - if (curr_bd != txch->active_queue_tail) - curr_bd = curr_bd->next; - else - break; - } - txch->bd_pool_head = txch->active_queue_head; - txch->active_queue_head = - txch->active_queue_tail = NULL; - } -} -/** - * emac_stop_txch: Stop TX channel operation - * @priv: The DaVinci EMAC private adapter structure - * @ch: TX channel number - * - * Called to stop TX channel operation - * - */ -static void emac_stop_txch(struct emac_priv *priv, u32 ch) -{ - struct emac_txch *txch = priv->txch[ch]; - - if (txch) { - txch->teardown_pending = 1; - emac_write(EMAC_TXTEARDOWN, 0); - emac_txch_teardown(priv, ch); - txch->teardown_pending = 0; - emac_write(EMAC_TXINTMASKCLEAR, BIT(ch)); + /* recycle on recieve error */ + if (status < 0) { + ndev->stats.rx_errors++; + goto recycle; } -} -/** - * emac_tx_bdproc: TX buffer descriptor (packet) processing - * @priv: The DaVinci EMAC private adapter structure - * @ch: TX channel number to process buffer descriptors for - * @budget: number of packets allowed to process - * @pending: indication to caller that packets are pending to process - * - * Processes TX buffer descriptors after packets are transmitted - checks - * ownership bit on the TX * descriptor and requeues it to free pool & frees - * the SKB buffer. Only "budget" number of packets are processed and - * indication of pending packets provided to the caller - * - * Returns number of packets processed - */ -static int emac_tx_bdproc(struct emac_priv *priv, u32 ch, u32 budget) -{ - struct device *emac_dev = &priv->ndev->dev; - unsigned long flags; - u32 frame_status; - u32 pkts_processed = 0; - u32 tx_complete_cnt = 0; - struct emac_tx_bd __iomem *curr_bd; - struct emac_txch *txch = priv->txch[ch]; - u32 *tx_complete_ptr = txch->tx_complete; - - if (unlikely(1 == txch->teardown_pending)) { - if (netif_msg_tx_err(priv) && net_ratelimit()) { - dev_err(emac_dev, "DaVinci EMAC:emac_tx_bdproc: "\ - "teardown pending\n"); - } - return 0; /* dont handle any pkt completions */ - } + /* feed received packet up the stack */ + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, ndev); + netif_receive_skb(skb); + ndev->stats.rx_bytes += len; + ndev->stats.rx_packets++; - ++txch->proc_count; - spin_lock_irqsave(&priv->tx_lock, flags); - curr_bd = txch->active_queue_head; - if (NULL == curr_bd) { - emac_write(EMAC_TXCP(ch), - emac_virt_to_phys(txch->last_hw_bdprocessed, priv)); - txch->no_active_pkts++; - spin_unlock_irqrestore(&priv->tx_lock, flags); - return 0; + /* alloc a new packet for receive */ + skb = emac_rx_alloc(priv); + if (!skb) { + if (netif_msg_rx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "failed rx buffer alloc\n"); + return; } - BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); - frame_status = curr_bd->mode; - while ((curr_bd) && - ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) && - (pkts_processed < budget)) { - emac_write(EMAC_TXCP(ch), emac_virt_to_phys(curr_bd, priv)); - txch->active_queue_head = curr_bd->next; - if (frame_status & EMAC_CPPI_EOQ_BIT) { - if (curr_bd->next) { /* misqueued packet */ - emac_write(EMAC_TXHDP(ch), curr_bd->h_next); - ++txch->mis_queued_packets; - } else { - txch->queue_active = 0; /* end of queue */ - } - } - dma_unmap_single(emac_dev, curr_bd->buff_ptr, - curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE, - DMA_TO_DEVICE); - - *tx_complete_ptr = (u32) curr_bd->buf_token; - ++tx_complete_ptr; - ++tx_complete_cnt; - curr_bd->next = txch->bd_pool_head; - txch->bd_pool_head = curr_bd; - --txch->active_queue_count; - pkts_processed++; - txch->last_hw_bdprocessed = curr_bd; - curr_bd = txch->active_queue_head; - if (curr_bd) { - BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); - frame_status = curr_bd->mode; - } - } /* end of pkt processing loop */ - - emac_net_tx_complete(priv, - (void *)&txch->tx_complete[0], - tx_complete_cnt, ch); - spin_unlock_irqrestore(&priv->tx_lock, flags); - return pkts_processed; +recycle: + ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, + skb_tailroom(skb), GFP_KERNEL); + if (WARN_ON(ret < 0)) + dev_kfree_skb_any(skb); } -#define EMAC_ERR_TX_OUT_OF_BD -1 - -/** - * emac_send: EMAC Transmit function (internal) - * @priv: The DaVinci EMAC private adapter structure - * @pkt: packet pointer (contains skb ptr) - * @ch: TX channel number - * - * Called by the transmit function to queue the packet in EMAC hardware queue - * - * Returns success(0) or error code (typically out of desc's) - */ -static int emac_send(struct emac_priv *priv, struct emac_netpktobj *pkt, u32 ch) +static void emac_tx_handler(void *token, int len, int status) { - unsigned long flags; - struct emac_tx_bd __iomem *curr_bd; - struct emac_txch *txch; - struct emac_netbufobj *buf_list; - - txch = priv->txch[ch]; - buf_list = pkt->buf_list; /* get handle to the buffer array */ - - /* check packet size and pad if short */ - if (pkt->pkt_length < EMAC_DEF_MIN_ETHPKTSIZE) { - buf_list->length += (EMAC_DEF_MIN_ETHPKTSIZE - pkt->pkt_length); - pkt->pkt_length = EMAC_DEF_MIN_ETHPKTSIZE; - } + struct sk_buff *skb = token; + struct net_device *ndev = skb->dev; - spin_lock_irqsave(&priv->tx_lock, flags); - curr_bd = txch->bd_pool_head; - if (curr_bd == NULL) { - txch->out_of_tx_bd++; - spin_unlock_irqrestore(&priv->tx_lock, flags); - return EMAC_ERR_TX_OUT_OF_BD; - } - - txch->bd_pool_head = curr_bd->next; - curr_bd->buf_token = buf_list->buf_token; - curr_bd->buff_ptr = dma_map_single(&priv->ndev->dev, buf_list->data_ptr, - buf_list->length, DMA_TO_DEVICE); - curr_bd->off_b_len = buf_list->length; - curr_bd->h_next = 0; - curr_bd->next = NULL; - curr_bd->mode = (EMAC_CPPI_SOP_BIT | EMAC_CPPI_OWNERSHIP_BIT | - EMAC_CPPI_EOP_BIT | pkt->pkt_length); - - /* flush the packet from cache if write back cache is present */ - BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); - - /* send the packet */ - if (txch->active_queue_head == NULL) { - txch->active_queue_head = curr_bd; - txch->active_queue_tail = curr_bd; - if (1 != txch->queue_active) { - emac_write(EMAC_TXHDP(ch), - emac_virt_to_phys(curr_bd, priv)); - txch->queue_active = 1; - } - ++txch->queue_reinit; - } else { - register struct emac_tx_bd __iomem *tail_bd; - register u32 frame_status; - - tail_bd = txch->active_queue_tail; - tail_bd->next = curr_bd; - txch->active_queue_tail = curr_bd; - tail_bd = EMAC_VIRT_NOCACHE(tail_bd); - tail_bd->h_next = (int)emac_virt_to_phys(curr_bd, priv); - frame_status = tail_bd->mode; - if (frame_status & EMAC_CPPI_EOQ_BIT) { - emac_write(EMAC_TXHDP(ch), - emac_virt_to_phys(curr_bd, priv)); - frame_status &= ~(EMAC_CPPI_EOQ_BIT); - tail_bd->mode = frame_status; - ++txch->end_of_queue_add; - } - } - txch->active_queue_count++; - spin_unlock_irqrestore(&priv->tx_lock, flags); - return 0; + if (unlikely(netif_queue_stopped(ndev))) + netif_start_queue(ndev); + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += len; + dev_kfree_skb_any(skb); } /** @@ -1565,42 +1067,36 @@ static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) { struct device *emac_dev = &ndev->dev; int ret_code; - struct emac_netbufobj tx_buf; /* buffer obj-only single frame support */ - struct emac_netpktobj tx_packet; /* packet object */ struct emac_priv *priv = netdev_priv(ndev); /* If no link, return */ if (unlikely(!priv->link)) { if (netif_msg_tx_err(priv) && net_ratelimit()) dev_err(emac_dev, "DaVinci EMAC: No link to transmit"); - return NETDEV_TX_BUSY; + goto fail_tx; + } + + ret_code = skb_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE); + if (unlikely(ret_code < 0)) { + if (netif_msg_tx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "DaVinci EMAC: packet pad failed"); + goto fail_tx; } - /* Build the buffer and packet objects - Since only single fragment is - * supported, need not set length and token in both packet & object. - * Doing so for completeness sake & to show that this needs to be done - * in multifragment case - */ - tx_packet.buf_list = &tx_buf; - tx_packet.num_bufs = 1; /* only single fragment supported */ - tx_packet.pkt_length = skb->len; - tx_packet.pkt_token = (void *)skb; - tx_buf.length = skb->len; - tx_buf.buf_token = (void *)skb; - tx_buf.data_ptr = skb->data; - ret_code = emac_send(priv, &tx_packet, EMAC_DEF_TX_CH); + ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len, + GFP_KERNEL); if (unlikely(ret_code != 0)) { - if (ret_code == EMAC_ERR_TX_OUT_OF_BD) { - if (netif_msg_tx_err(priv) && net_ratelimit()) - dev_err(emac_dev, "DaVinci EMAC: xmit() fatal"\ - " err. Out of TX BD's"); - netif_stop_queue(priv->ndev); - } - ndev->stats.tx_dropped++; - return NETDEV_TX_BUSY; + if (netif_msg_tx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "DaVinci EMAC: desc submit failed"); + goto fail_tx; } return NETDEV_TX_OK; + +fail_tx: + ndev->stats.tx_dropped++; + netif_stop_queue(ndev); + return NETDEV_TX_BUSY; } /** @@ -1621,218 +1117,16 @@ static void emac_dev_tx_timeout(struct net_device *ndev) if (netif_msg_tx_err(priv)) dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX"); + emac_dump_regs(priv); + ndev->stats.tx_errors++; emac_int_disable(priv); - emac_stop_txch(priv, EMAC_DEF_TX_CH); - emac_cleanup_txch(priv, EMAC_DEF_TX_CH); - emac_init_txch(priv, EMAC_DEF_TX_CH); - emac_write(EMAC_TXHDP(0), 0); - emac_write(EMAC_TXINTMASKSET, BIT(EMAC_DEF_TX_CH)); + cpdma_chan_stop(priv->txchan); + cpdma_chan_start(priv->txchan); emac_int_enable(priv); } /** - * emac_net_alloc_rx_buf: Allocate a skb for RX - * @priv: The DaVinci EMAC private adapter structure - * @buf_size: size of SKB data buffer to allocate - * @data_token: data token returned (skb handle for storing in buffer desc) - * @ch: RX channel number - * - * Called during RX channel setup - allocates skb buffer of required size - * and provides the skb handle and allocated buffer data pointer to caller - * - * Returns skb data pointer or 0 on failure to alloc skb - */ -static void *emac_net_alloc_rx_buf(struct emac_priv *priv, int buf_size, - void **data_token, u32 ch) -{ - struct net_device *ndev = priv->ndev; - struct device *emac_dev = &ndev->dev; - struct sk_buff *p_skb; - - p_skb = dev_alloc_skb(buf_size); - if (unlikely(NULL == p_skb)) { - if (netif_msg_rx_err(priv) && net_ratelimit()) - dev_err(emac_dev, "DaVinci EMAC: failed to alloc skb"); - return NULL; - } - - /* set device pointer in skb and reserve space for extra bytes */ - p_skb->dev = ndev; - skb_reserve(p_skb, NET_IP_ALIGN); - *data_token = (void *) p_skb; - return p_skb->data; -} - -/** - * emac_init_rxch: RX channel initialization - * @priv: The DaVinci EMAC private adapter structure - * @ch: RX channel number - * @param: mac address for RX channel - * - * Called during device init to setup a RX channel (allocate buffers and - * buffer descriptors, create queue and keep ready for reception - * - * Returns success(0) or mem alloc failures error code - */ -static int emac_init_rxch(struct emac_priv *priv, u32 ch, char *param) -{ - struct device *emac_dev = &priv->ndev->dev; - u32 cnt, bd_size; - void __iomem *mem; - struct emac_rx_bd __iomem *curr_bd; - struct emac_rxch *rxch = NULL; - - rxch = kzalloc(sizeof(struct emac_rxch), GFP_KERNEL); - if (NULL == rxch) { - dev_err(emac_dev, "DaVinci EMAC: RX Ch mem alloc failed"); - return -ENOMEM; - } - priv->rxch[ch] = rxch; - rxch->buf_size = priv->rx_buf_size; - rxch->service_max = EMAC_DEF_RX_MAX_SERVICE; - rxch->queue_active = 0; - rxch->teardown_pending = 0; - - /* save mac address */ - for (cnt = 0; cnt < 6; cnt++) - rxch->mac_addr[cnt] = param[cnt]; - - /* allocate buffer descriptor pool align every BD on four word - * boundry for future requirements */ - bd_size = (sizeof(struct emac_rx_bd) + 0xF) & ~0xF; - rxch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size; - rxch->alloc_size = (((bd_size * rxch->num_bd) + 0xF) & ~0xF); - rxch->bd_mem = EMAC_RX_BD_MEM(priv); - __memzero((void __force *)rxch->bd_mem, rxch->alloc_size); - rxch->pkt_queue.buf_list = &rxch->buf_queue; - - /* allocate RX buffer and initialize the BD linked list */ - mem = (void __force __iomem *) - (((u32 __force) rxch->bd_mem + 0xF) & ~0xF); - rxch->active_queue_head = NULL; - rxch->active_queue_tail = mem; - for (cnt = 0; cnt < rxch->num_bd; cnt++) { - curr_bd = mem + (cnt * bd_size); - /* for future use the last parameter contains the BD ptr */ - curr_bd->data_ptr = emac_net_alloc_rx_buf(priv, - rxch->buf_size, - (void __force **)&curr_bd->buf_token, - EMAC_DEF_RX_CH); - if (curr_bd->data_ptr == NULL) { - dev_err(emac_dev, "DaVinci EMAC: RX buf mem alloc " \ - "failed for ch %d\n", ch); - kfree(rxch); - return -ENOMEM; - } - - /* populate the hardware descriptor */ - curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head, - priv); - curr_bd->buff_ptr = dma_map_single(emac_dev, curr_bd->data_ptr, - rxch->buf_size, DMA_FROM_DEVICE); - curr_bd->off_b_len = rxch->buf_size; - curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT; - - /* write back to hardware memory */ - BD_CACHE_WRITEBACK_INVALIDATE((u32) curr_bd, - EMAC_BD_LENGTH_FOR_CACHE); - curr_bd->next = rxch->active_queue_head; - rxch->active_queue_head = curr_bd; - } - - /* At this point rxCppi->activeQueueHead points to the first - RX BD ready to be given to RX HDP and rxch->active_queue_tail - points to the last RX BD - */ - return 0; -} - -/** - * emac_rxch_teardown: RX channel teardown - * @priv: The DaVinci EMAC private adapter structure - * @ch: RX channel number - * - * Called during device stop to teardown RX channel - * - */ -static void emac_rxch_teardown(struct emac_priv *priv, u32 ch) -{ - struct device *emac_dev = &priv->ndev->dev; - u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */ - - while ((emac_read(EMAC_RXCP(ch)) & EMAC_TEARDOWN_VALUE) != - EMAC_TEARDOWN_VALUE) { - /* wait till tx teardown complete */ - cpu_relax(); /* TODO: check if this helps ... */ - --teardown_cnt; - if (0 == teardown_cnt) { - dev_err(emac_dev, "EMAC: RX teardown aborted\n"); - break; - } - } - emac_write(EMAC_RXCP(ch), EMAC_TEARDOWN_VALUE); -} - -/** - * emac_stop_rxch: Stop RX channel operation - * @priv: The DaVinci EMAC private adapter structure - * @ch: RX channel number - * - * Called during device stop to stop RX channel operation - * - */ -static void emac_stop_rxch(struct emac_priv *priv, u32 ch) -{ - struct emac_rxch *rxch = priv->rxch[ch]; - - if (rxch) { - rxch->teardown_pending = 1; - emac_write(EMAC_RXTEARDOWN, ch); - /* wait for teardown complete */ - emac_rxch_teardown(priv, ch); - rxch->teardown_pending = 0; - emac_write(EMAC_RXINTMASKCLEAR, BIT(ch)); - } -} - -/** - * emac_cleanup_rxch: Book-keep function to clean RX channel resources - * @priv: The DaVinci EMAC private adapter structure - * @ch: RX channel number - * - * Called during device stop to clean up RX channel resources - * - */ -static void emac_cleanup_rxch(struct emac_priv *priv, u32 ch) -{ - struct emac_rxch *rxch = priv->rxch[ch]; - struct emac_rx_bd __iomem *curr_bd; - - if (rxch) { - /* free the receive buffers previously allocated */ - curr_bd = rxch->active_queue_head; - while (curr_bd) { - if (curr_bd->buf_token) { - dma_unmap_single(&priv->ndev->dev, - curr_bd->buff_ptr, - curr_bd->off_b_len - & EMAC_RX_BD_BUF_SIZE, - DMA_FROM_DEVICE); - - dev_kfree_skb_any((struct sk_buff *)\ - curr_bd->buf_token); - } - curr_bd = curr_bd->next; - } - if (rxch->bd_mem) - rxch->bd_mem = NULL; - kfree(rxch); - priv->rxch[ch] = NULL; - } -} - -/** * emac_set_type0addr: Set EMAC Type0 mac address * @priv: The DaVinci EMAC private adapter structure * @ch: RX channel number @@ -1948,7 +1242,6 @@ static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr) static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) { struct emac_priv *priv = netdev_priv(ndev); - struct emac_rxch *rxch = priv->rxch[EMAC_DEF_RX_CH]; struct device *emac_dev = &priv->ndev->dev; struct sockaddr *sa = addr; @@ -1959,11 +1252,10 @@ static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); - /* If the interface is down - rxch is NULL. */ /* MAC address is configured only after the interface is enabled. */ if (netif_running(ndev)) { - memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len); - emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr); + memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); + emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); } if (netif_msg_drv(priv)) @@ -1974,194 +1266,6 @@ static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) } /** - * emac_addbd_to_rx_queue: Recycle RX buffer descriptor - * @priv: The DaVinci EMAC private adapter structure - * @ch: RX channel number to process buffer descriptors for - * @curr_bd: current buffer descriptor - * @buffer: buffer pointer for descriptor - * @buf_token: buffer token (stores skb information) - * - * Prepares the recycled buffer descriptor and addes it to hardware - * receive queue - if queue empty this descriptor becomes the head - * else addes the descriptor to end of queue - * - */ -static void emac_addbd_to_rx_queue(struct emac_priv *priv, u32 ch, - struct emac_rx_bd __iomem *curr_bd, - char *buffer, void *buf_token) -{ - struct emac_rxch *rxch = priv->rxch[ch]; - - /* populate the hardware descriptor */ - curr_bd->h_next = 0; - curr_bd->buff_ptr = dma_map_single(&priv->ndev->dev, buffer, - rxch->buf_size, DMA_FROM_DEVICE); - curr_bd->off_b_len = rxch->buf_size; - curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT; - curr_bd->next = NULL; - curr_bd->data_ptr = buffer; - curr_bd->buf_token = buf_token; - - /* write back */ - BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); - if (rxch->active_queue_head == NULL) { - rxch->active_queue_head = curr_bd; - rxch->active_queue_tail = curr_bd; - if (0 != rxch->queue_active) { - emac_write(EMAC_RXHDP(ch), - emac_virt_to_phys(rxch->active_queue_head, priv)); - rxch->queue_active = 1; - } - } else { - struct emac_rx_bd __iomem *tail_bd; - u32 frame_status; - - tail_bd = rxch->active_queue_tail; - rxch->active_queue_tail = curr_bd; - tail_bd->next = curr_bd; - tail_bd = EMAC_VIRT_NOCACHE(tail_bd); - tail_bd->h_next = emac_virt_to_phys(curr_bd, priv); - frame_status = tail_bd->mode; - if (frame_status & EMAC_CPPI_EOQ_BIT) { - emac_write(EMAC_RXHDP(ch), - emac_virt_to_phys(curr_bd, priv)); - frame_status &= ~(EMAC_CPPI_EOQ_BIT); - tail_bd->mode = frame_status; - ++rxch->end_of_queue_add; - } - } - ++rxch->recycled_bd; -} - -/** - * emac_net_rx_cb: Prepares packet and sends to upper layer - * @priv: The DaVinci EMAC private adapter structure - * @net_pkt_list: Network packet list (received packets) - * - * Invalidates packet buffer memory and sends the received packet to upper - * layer - * - * Returns success or appropriate error code (none as of now) - */ -static int emac_net_rx_cb(struct emac_priv *priv, - struct emac_netpktobj *net_pkt_list) -{ - struct net_device *ndev = priv->ndev; - struct sk_buff *p_skb = net_pkt_list->pkt_token; - /* set length of packet */ - skb_put(p_skb, net_pkt_list->pkt_length); - p_skb->protocol = eth_type_trans(p_skb, priv->ndev); - netif_receive_skb(p_skb); - ndev->stats.rx_bytes += net_pkt_list->pkt_length; - ndev->stats.rx_packets++; - return 0; -} - -/** - * emac_rx_bdproc: RX buffer descriptor (packet) processing - * @priv: The DaVinci EMAC private adapter structure - * @ch: RX channel number to process buffer descriptors for - * @budget: number of packets allowed to process - * @pending: indication to caller that packets are pending to process - * - * Processes RX buffer descriptors - checks ownership bit on the RX buffer - * descriptor, sends the receive packet to upper layer, allocates a new SKB - * and recycles the buffer descriptor (requeues it in hardware RX queue). - * Only "budget" number of packets are processed and indication of pending - * packets provided to the caller. - * - * Returns number of packets processed (and indication of pending packets) - */ -static int emac_rx_bdproc(struct emac_priv *priv, u32 ch, u32 budget) -{ - unsigned long flags; - u32 frame_status; - u32 pkts_processed = 0; - char *new_buffer; - struct emac_rx_bd __iomem *curr_bd; - struct emac_rx_bd __iomem *last_bd; - struct emac_netpktobj *curr_pkt, pkt_obj; - struct emac_netbufobj buf_obj; - struct emac_netbufobj *rx_buf_obj; - void *new_buf_token; - struct emac_rxch *rxch = priv->rxch[ch]; - - if (unlikely(1 == rxch->teardown_pending)) - return 0; - ++rxch->proc_count; - spin_lock_irqsave(&priv->rx_lock, flags); - pkt_obj.buf_list = &buf_obj; - curr_pkt = &pkt_obj; - curr_bd = rxch->active_queue_head; - BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); - frame_status = curr_bd->mode; - - while ((curr_bd) && - ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) && - (pkts_processed < budget)) { - - new_buffer = emac_net_alloc_rx_buf(priv, rxch->buf_size, - &new_buf_token, EMAC_DEF_RX_CH); - if (unlikely(NULL == new_buffer)) { - ++rxch->out_of_rx_buffers; - goto end_emac_rx_bdproc; - } - - /* populate received packet data structure */ - rx_buf_obj = &curr_pkt->buf_list[0]; - rx_buf_obj->data_ptr = (char *)curr_bd->data_ptr; - rx_buf_obj->length = curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE; - rx_buf_obj->buf_token = curr_bd->buf_token; - - dma_unmap_single(&priv->ndev->dev, curr_bd->buff_ptr, - curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE, - DMA_FROM_DEVICE); - - curr_pkt->pkt_token = curr_pkt->buf_list->buf_token; - curr_pkt->num_bufs = 1; - curr_pkt->pkt_length = - (frame_status & EMAC_RX_BD_PKT_LENGTH_MASK); - emac_write(EMAC_RXCP(ch), emac_virt_to_phys(curr_bd, priv)); - ++rxch->processed_bd; - last_bd = curr_bd; - curr_bd = last_bd->next; - rxch->active_queue_head = curr_bd; - - /* check if end of RX queue ? */ - if (frame_status & EMAC_CPPI_EOQ_BIT) { - if (curr_bd) { - ++rxch->mis_queued_packets; - emac_write(EMAC_RXHDP(ch), - emac_virt_to_phys(curr_bd, priv)); - } else { - ++rxch->end_of_queue; - rxch->queue_active = 0; - } - } - - /* recycle BD */ - emac_addbd_to_rx_queue(priv, ch, last_bd, new_buffer, - new_buf_token); - - /* return the packet to the user - BD ptr passed in - * last parameter for potential *future* use */ - spin_unlock_irqrestore(&priv->rx_lock, flags); - emac_net_rx_cb(priv, curr_pkt); - spin_lock_irqsave(&priv->rx_lock, flags); - curr_bd = rxch->active_queue_head; - if (curr_bd) { - BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); - frame_status = curr_bd->mode; - } - ++pkts_processed; - } - -end_emac_rx_bdproc: - spin_unlock_irqrestore(&priv->rx_lock, flags); - return pkts_processed; -} - -/** * emac_hw_enable: Enable EMAC hardware for packet transmission/reception * @priv: The DaVinci EMAC private adapter structure * @@ -2172,7 +1276,7 @@ end_emac_rx_bdproc: */ static int emac_hw_enable(struct emac_priv *priv) { - u32 ch, val, mbp_enable, mac_control; + u32 val, mbp_enable, mac_control; /* Soft reset */ emac_write(EMAC_SOFTRESET, 1); @@ -2215,26 +1319,9 @@ static int emac_hw_enable(struct emac_priv *priv) emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL); priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF; - val = emac_read(EMAC_TXCONTROL); - val |= EMAC_TX_CONTROL_TX_ENABLE_VAL; - emac_write(EMAC_TXCONTROL, val); - val = emac_read(EMAC_RXCONTROL); - val |= EMAC_RX_CONTROL_RX_ENABLE_VAL; - emac_write(EMAC_RXCONTROL, val); emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL); - for (ch = 0; ch < EMAC_DEF_MAX_TX_CH; ch++) { - emac_write(EMAC_TXHDP(ch), 0); - emac_write(EMAC_TXINTMASKSET, BIT(ch)); - } - for (ch = 0; ch < EMAC_DEF_MAX_RX_CH; ch++) { - struct emac_rxch *rxch = priv->rxch[ch]; - emac_setmac(priv, ch, rxch->mac_addr); - emac_write(EMAC_RXINTMASKSET, BIT(ch)); - rxch->queue_active = 1; - emac_write(EMAC_RXHDP(ch), - emac_virt_to_phys(rxch->active_queue_head, priv)); - } + emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); /* Enable MII */ val = emac_read(EMAC_MACCONTROL); @@ -2279,8 +1366,8 @@ static int emac_poll(struct napi_struct *napi, int budget) mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC; if (status & mask) { - num_tx_pkts = emac_tx_bdproc(priv, EMAC_DEF_TX_CH, - EMAC_DEF_TX_MAX_SERVICE); + num_tx_pkts = cpdma_chan_process(priv->txchan, + EMAC_DEF_TX_MAX_SERVICE); } /* TX processing */ mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC; @@ -2289,7 +1376,7 @@ static int emac_poll(struct napi_struct *napi, int budget) mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC; if (status & mask) { - num_rx_pkts = emac_rx_bdproc(priv, EMAC_DEF_RX_CH, budget); + num_rx_pkts = cpdma_chan_process(priv->rxchan, budget); } /* RX processing */ mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT; @@ -2348,79 +1435,6 @@ void emac_poll_controller(struct net_device *ndev) } #endif -/* PHY/MII bus related */ - -/* Wait until mdio is ready for next command */ -#define MDIO_WAIT_FOR_USER_ACCESS\ - while ((emac_mdio_read((MDIO_USERACCESS(0))) &\ - MDIO_USERACCESS_GO) != 0) - -static int emac_mii_read(struct mii_bus *bus, int phy_id, int phy_reg) -{ - unsigned int phy_data = 0; - unsigned int phy_control; - - /* Wait until mdio is ready for next command */ - MDIO_WAIT_FOR_USER_ACCESS; - - phy_control = (MDIO_USERACCESS_GO | - MDIO_USERACCESS_READ | - ((phy_reg << 21) & MDIO_USERACCESS_REGADR) | - ((phy_id << 16) & MDIO_USERACCESS_PHYADR) | - (phy_data & MDIO_USERACCESS_DATA)); - emac_mdio_write(MDIO_USERACCESS(0), phy_control); - - /* Wait until mdio is ready for next command */ - MDIO_WAIT_FOR_USER_ACCESS; - - return emac_mdio_read(MDIO_USERACCESS(0)) & MDIO_USERACCESS_DATA; - -} - -static int emac_mii_write(struct mii_bus *bus, int phy_id, - int phy_reg, u16 phy_data) -{ - - unsigned int control; - - /* until mdio is ready for next command */ - MDIO_WAIT_FOR_USER_ACCESS; - - control = (MDIO_USERACCESS_GO | - MDIO_USERACCESS_WRITE | - ((phy_reg << 21) & MDIO_USERACCESS_REGADR) | - ((phy_id << 16) & MDIO_USERACCESS_PHYADR) | - (phy_data & MDIO_USERACCESS_DATA)); - emac_mdio_write(MDIO_USERACCESS(0), control); - - return 0; -} - -static int emac_mii_reset(struct mii_bus *bus) -{ - unsigned int clk_div; - int mdio_bus_freq = emac_bus_frequency; - - if (mdio_max_freq && mdio_bus_freq) - clk_div = ((mdio_bus_freq / mdio_max_freq) - 1); - else - clk_div = 0xFF; - - clk_div &= MDIO_CONTROL_CLKDIV; - - /* Set enable and clock divider in MDIOControl */ - emac_mdio_write(MDIO_CONTROL, (clk_div | MDIO_CONTROL_ENABLE)); - - return 0; - -} - -static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, PHY_POLL }; - -/* emac_driver: EMAC MII bus structure */ - -static struct mii_bus *emac_mii; - static void emac_adjust_link(struct net_device *ndev) { struct emac_priv *priv = netdev_priv(ndev); @@ -2485,6 +1499,11 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) return -EOPNOTSUPP; } +static int match_first_device(struct device *dev, void *data) +{ + return 1; +} + /** * emac_dev_open: EMAC device open * @ndev: The DaVinci EMAC network adapter @@ -2498,10 +1517,9 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) static int emac_dev_open(struct net_device *ndev) { struct device *emac_dev = &ndev->dev; - u32 rc, cnt, ch; - int phy_addr; + u32 cnt; struct resource *res; - int q, m; + int q, m, ret; int i = 0; int k = 0; struct emac_priv *priv = netdev_priv(ndev); @@ -2513,29 +1531,21 @@ static int emac_dev_open(struct net_device *ndev) /* Configuration items */ priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN; - /* Clear basic hardware */ - for (ch = 0; ch < EMAC_MAX_TXRX_CHANNELS; ch++) { - emac_write(EMAC_TXHDP(ch), 0); - emac_write(EMAC_RXHDP(ch), 0); - emac_write(EMAC_RXHDP(ch), 0); - emac_write(EMAC_RXINTMASKCLEAR, EMAC_INT_MASK_CLEAR); - emac_write(EMAC_TXINTMASKCLEAR, EMAC_INT_MASK_CLEAR); - } priv->mac_hash1 = 0; priv->mac_hash2 = 0; emac_write(EMAC_MACHASH1, 0); emac_write(EMAC_MACHASH2, 0); - /* multi ch not supported - open 1 TX, 1RX ch by default */ - rc = emac_init_txch(priv, EMAC_DEF_TX_CH); - if (0 != rc) { - dev_err(emac_dev, "DaVinci EMAC: emac_init_txch() failed"); - return rc; - } - rc = emac_init_rxch(priv, EMAC_DEF_RX_CH, priv->mac_addr); - if (0 != rc) { - dev_err(emac_dev, "DaVinci EMAC: emac_init_rxch() failed"); - return rc; + for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) { + struct sk_buff *skb = emac_rx_alloc(priv); + + if (!skb) + break; + + ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, + skb_tailroom(skb), GFP_KERNEL); + if (WARN_ON(ret < 0)) + break; } /* Request IRQ */ @@ -2560,28 +1570,28 @@ static int emac_dev_open(struct net_device *ndev) emac_set_coalesce(ndev, &coal); } - /* find the first phy */ + cpdma_ctlr_start(priv->dma); + priv->phydev = NULL; - if (priv->phy_mask) { - emac_mii_reset(priv->mii_bus); - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { - if (priv->mii_bus->phy_map[phy_addr]) { - priv->phydev = priv->mii_bus->phy_map[phy_addr]; - break; - } - } + /* use the first phy on the bus if pdata did not give us a phy id */ + if (!priv->phy_id) { + struct device *phy; - if (!priv->phydev) { - printk(KERN_ERR "%s: no PHY found\n", ndev->name); - return -1; - } + phy = bus_find_device(&mdio_bus_type, NULL, NULL, + match_first_device); + if (phy) + priv->phy_id = dev_name(phy); + } - priv->phydev = phy_connect(ndev, dev_name(&priv->phydev->dev), - &emac_adjust_link, 0, PHY_INTERFACE_MODE_MII); + if (priv->phy_id && *priv->phy_id) { + priv->phydev = phy_connect(ndev, priv->phy_id, + &emac_adjust_link, 0, + PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phydev)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", - ndev->name); + dev_err(emac_dev, "could not connect to phy %s\n", + priv->phy_id); + priv->phydev = NULL; return PTR_ERR(priv->phydev); } @@ -2589,12 +1599,13 @@ static int emac_dev_open(struct net_device *ndev) priv->speed = 0; priv->duplex = ~0; - printk(KERN_INFO "%s: attached PHY driver [%s] " - "(mii_bus:phy_addr=%s, id=%x)\n", ndev->name, + dev_info(emac_dev, "attached PHY driver [%s] " + "(mii_bus:phy_addr=%s, id=%x)\n", priv->phydev->drv->name, dev_name(&priv->phydev->dev), priv->phydev->phy_id); - } else{ + } else { /* No PHY , fix the link, speed and duplex settings */ + dev_notice(emac_dev, "no phy, defaulting to 100/full\n"); priv->link = 1; priv->speed = SPEED_100; priv->duplex = DUPLEX_FULL; @@ -2607,7 +1618,7 @@ static int emac_dev_open(struct net_device *ndev) if (netif_msg_drv(priv)) dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name); - if (priv->phy_mask) + if (priv->phydev) phy_start(priv->phydev); return 0; @@ -2648,10 +1659,7 @@ static int emac_dev_stop(struct net_device *ndev) netif_carrier_off(ndev); emac_int_disable(priv); - emac_stop_txch(priv, EMAC_DEF_TX_CH); - emac_stop_rxch(priv, EMAC_DEF_RX_CH); - emac_cleanup_txch(priv, EMAC_DEF_TX_CH); - emac_cleanup_rxch(priv, EMAC_DEF_RX_CH); + cpdma_ctlr_stop(priv->dma); emac_write(EMAC_SOFTRESET, 1); if (priv->phydev) @@ -2756,9 +1764,10 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) struct resource *res; struct net_device *ndev; struct emac_priv *priv; - unsigned long size; + unsigned long size, hw_ram_addr; struct emac_platform_data *pdata; struct device *emac_dev; + struct cpdma_params dma_params; /* obtain emac clock from kernel */ emac_clk = clk_get(&pdev->dev, NULL); @@ -2782,8 +1791,6 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) priv->ndev = ndev; priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG); - spin_lock_init(&priv->tx_lock); - spin_lock_init(&priv->rx_lock); spin_lock_init(&priv->lock); pdata = pdev->dev.platform_data; @@ -2794,7 +1801,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) /* MAC addr and PHY mask , RMII enable info from platform_data */ memcpy(priv->mac_addr, pdata->mac_addr, 6); - priv->phy_mask = pdata->phy_mask; + priv->phy_id = pdata->phy_id; priv->rmii_en = pdata->rmii_en; priv->version = pdata->version; priv->int_enable = pdata->interrupt_enable; @@ -2831,14 +1838,41 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) ndev->base_addr = (unsigned long)priv->remap_addr; priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset; - priv->ctrl_ram_size = pdata->ctrl_ram_size; - priv->emac_ctrl_ram = priv->remap_addr + pdata->ctrl_ram_offset; - if (pdata->hw_ram_addr) - priv->hw_ram_addr = pdata->hw_ram_addr; - else - priv->hw_ram_addr = (u32 __force)res->start + - pdata->ctrl_ram_offset; + hw_ram_addr = pdata->hw_ram_addr; + if (!hw_ram_addr) + hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset; + + memset(&dma_params, 0, sizeof(dma_params)); + dma_params.dev = emac_dev; + dma_params.dmaregs = priv->emac_base; + dma_params.rxthresh = priv->emac_base + 0x120; + dma_params.rxfree = priv->emac_base + 0x140; + dma_params.txhdp = priv->emac_base + 0x600; + dma_params.rxhdp = priv->emac_base + 0x620; + dma_params.txcp = priv->emac_base + 0x640; + dma_params.rxcp = priv->emac_base + 0x660; + dma_params.num_chan = EMAC_MAX_TXRX_CHANNELS; + dma_params.min_packet_size = EMAC_DEF_MIN_ETHPKTSIZE; + dma_params.desc_mem_phys = hw_ram_addr; + dma_params.desc_mem_size = pdata->ctrl_ram_size; + dma_params.desc_align = 16; + + priv->dma = cpdma_ctlr_create(&dma_params); + if (!priv->dma) { + dev_err(emac_dev, "DaVinci EMAC: Error initializing DMA\n"); + rc = -ENOMEM; + goto no_dma; + } + + priv->txchan = cpdma_chan_create(priv->dma, tx_chan_num(EMAC_DEF_TX_CH), + emac_tx_handler); + priv->rxchan = cpdma_chan_create(priv->dma, rx_chan_num(EMAC_DEF_RX_CH), + emac_rx_handler); + if (WARN_ON(!priv->txchan || !priv->rxchan)) { + rc = -ENOMEM; + goto no_irq_res; + } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { @@ -2871,32 +1905,6 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) } - /* MII/Phy intialisation, mdio bus registration */ - emac_mii = mdiobus_alloc(); - if (emac_mii == NULL) { - dev_err(emac_dev, "DaVinci EMAC: Error allocating mii_bus\n"); - rc = -ENOMEM; - goto mdio_alloc_err; - } - - priv->mii_bus = emac_mii; - emac_mii->name = "emac-mii", - emac_mii->read = emac_mii_read, - emac_mii->write = emac_mii_write, - emac_mii->reset = emac_mii_reset, - emac_mii->irq = mii_irqs, - emac_mii->phy_mask = ~(priv->phy_mask); - emac_mii->parent = &pdev->dev; - emac_mii->priv = priv->remap_addr + pdata->mdio_reg_offset; - snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", priv->pdev->id); - mdio_max_freq = pdata->mdio_max_freq; - emac_mii->reset(emac_mii); - - /* Register the MII bus */ - rc = mdiobus_register(emac_mii); - if (rc) - goto mdiobus_quit; - if (netif_msg_probe(priv)) { dev_notice(emac_dev, "DaVinci EMAC Probe found device "\ "(regs: %p, irq: %d)\n", @@ -2904,13 +1912,15 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) } return 0; -mdiobus_quit: - mdiobus_free(emac_mii); - netdev_reg_err: -mdio_alloc_err: clk_disable(emac_clk); no_irq_res: + if (priv->txchan) + cpdma_chan_destroy(priv->txchan); + if (priv->rxchan) + cpdma_chan_destroy(priv->rxchan); + cpdma_ctlr_destroy(priv->dma); +no_dma: res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, res->end - res->start + 1); iounmap(priv->remap_addr); @@ -2938,8 +1948,12 @@ static int __devexit davinci_emac_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mdiobus_unregister(priv->mii_bus); - mdiobus_free(priv->mii_bus); + + if (priv->txchan) + cpdma_chan_destroy(priv->txchan); + if (priv->rxchan) + cpdma_chan_destroy(priv->rxchan); + cpdma_ctlr_destroy(priv->dma); release_mem_region(res->start, res->end - res->start + 1); diff --git a/drivers/net/davinci_mdio.c b/drivers/net/davinci_mdio.c new file mode 100644 index 000000000000..7615040df756 --- /dev/null +++ b/drivers/net/davinci_mdio.c @@ -0,0 +1,475 @@ +/* + * DaVinci MDIO Module driver + * + * Copyright (C) 2010 Texas Instruments. + * + * Shamelessly ripped out of davinci_emac.c, original copyrights follow: + * + * Copyright (C) 2009 Texas Instruments. + * + * --------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * --------------------------------------------------------------------------- + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/phy.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/davinci_emac.h> + +/* + * This timeout definition is a worst-case ultra defensive measure against + * unexpected controller lock ups. Ideally, we should never ever hit this + * scenario in practice. + */ +#define MDIO_TIMEOUT 100 /* msecs */ + +#define PHY_REG_MASK 0x1f +#define PHY_ID_MASK 0x1f + +#define DEF_OUT_FREQ 2200000 /* 2.2 MHz */ + +struct davinci_mdio_regs { + u32 version; + u32 control; +#define CONTROL_IDLE BIT(31) +#define CONTROL_ENABLE BIT(30) +#define CONTROL_MAX_DIV (0xff) + + u32 alive; + u32 link; + u32 linkintraw; + u32 linkintmasked; + u32 __reserved_0[2]; + u32 userintraw; + u32 userintmasked; + u32 userintmaskset; + u32 userintmaskclr; + u32 __reserved_1[20]; + + struct { + u32 access; +#define USERACCESS_GO BIT(31) +#define USERACCESS_WRITE BIT(30) +#define USERACCESS_ACK BIT(29) +#define USERACCESS_READ (0) +#define USERACCESS_DATA (0xffff) + + u32 physel; + } user[0]; +}; + +struct mdio_platform_data default_pdata = { + .bus_freq = DEF_OUT_FREQ, +}; + +struct davinci_mdio_data { + struct mdio_platform_data pdata; + struct davinci_mdio_regs __iomem *regs; + spinlock_t lock; + struct clk *clk; + struct device *dev; + struct mii_bus *bus; + bool suspended; + unsigned long access_time; /* jiffies */ +}; + +static void __davinci_mdio_reset(struct davinci_mdio_data *data) +{ + u32 mdio_in, div, mdio_out_khz, access_time; + + mdio_in = clk_get_rate(data->clk); + div = (mdio_in / data->pdata.bus_freq) - 1; + if (div > CONTROL_MAX_DIV) + div = CONTROL_MAX_DIV; + + /* set enable and clock divider */ + __raw_writel(div | CONTROL_ENABLE, &data->regs->control); + + /* + * One mdio transaction consists of: + * 32 bits of preamble + * 32 bits of transferred data + * 24 bits of bus yield (not needed unless shared?) + */ + mdio_out_khz = mdio_in / (1000 * (div + 1)); + access_time = (88 * 1000) / mdio_out_khz; + + /* + * In the worst case, we could be kicking off a user-access immediately + * after the mdio bus scan state-machine triggered its own read. If + * so, our request could get deferred by one access cycle. We + * defensively allow for 4 access cycles. + */ + data->access_time = usecs_to_jiffies(access_time * 4); + if (!data->access_time) + data->access_time = 1; +} + +static int davinci_mdio_reset(struct mii_bus *bus) +{ + struct davinci_mdio_data *data = bus->priv; + u32 phy_mask, ver; + + __davinci_mdio_reset(data); + + /* wait for scan logic to settle */ + msleep(PHY_MAX_ADDR * data->access_time); + + /* dump hardware version info */ + ver = __raw_readl(&data->regs->version); + dev_info(data->dev, "davinci mdio revision %d.%d\n", + (ver >> 8) & 0xff, ver & 0xff); + + /* get phy mask from the alive register */ + phy_mask = __raw_readl(&data->regs->alive); + if (phy_mask) { + /* restrict mdio bus to live phys only */ + dev_info(data->dev, "detected phy mask %x\n", ~phy_mask); + phy_mask = ~phy_mask; + } else { + /* desperately scan all phys */ + dev_warn(data->dev, "no live phy, scanning all\n"); + phy_mask = 0; + } + data->bus->phy_mask = phy_mask; + + return 0; +} + +/* wait until hardware is ready for another user access */ +static inline int wait_for_user_access(struct davinci_mdio_data *data) +{ + struct davinci_mdio_regs __iomem *regs = data->regs; + unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT); + u32 reg; + + while (time_after(timeout, jiffies)) { + reg = __raw_readl(®s->user[0].access); + if ((reg & USERACCESS_GO) == 0) + return 0; + + reg = __raw_readl(®s->control); + if ((reg & CONTROL_IDLE) == 0) + continue; + + /* + * An emac soft_reset may have clobbered the mdio controller's + * state machine. We need to reset and retry the current + * operation + */ + dev_warn(data->dev, "resetting idled controller\n"); + __davinci_mdio_reset(data); + return -EAGAIN; + } + dev_err(data->dev, "timed out waiting for user access\n"); + return -ETIMEDOUT; +} + +/* wait until hardware state machine is idle */ +static inline int wait_for_idle(struct davinci_mdio_data *data) +{ + struct davinci_mdio_regs __iomem *regs = data->regs; + unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT); + + while (time_after(timeout, jiffies)) { + if (__raw_readl(®s->control) & CONTROL_IDLE) + return 0; + } + dev_err(data->dev, "timed out waiting for idle\n"); + return -ETIMEDOUT; +} + +static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg) +{ + struct davinci_mdio_data *data = bus->priv; + u32 reg; + int ret; + + if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) + return -EINVAL; + + spin_lock(&data->lock); + + if (data->suspended) { + spin_unlock(&data->lock); + return -ENODEV; + } + + reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) | + (phy_id << 16)); + + while (1) { + ret = wait_for_user_access(data); + if (ret == -EAGAIN) + continue; + if (ret < 0) + break; + + __raw_writel(reg, &data->regs->user[0].access); + + ret = wait_for_user_access(data); + if (ret == -EAGAIN) + continue; + if (ret < 0) + break; + + reg = __raw_readl(&data->regs->user[0].access); + ret = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO; + break; + } + + spin_unlock(&data->lock); + + return ret; +} + +static int davinci_mdio_write(struct mii_bus *bus, int phy_id, + int phy_reg, u16 phy_data) +{ + struct davinci_mdio_data *data = bus->priv; + u32 reg; + int ret; + + if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) + return -EINVAL; + + spin_lock(&data->lock); + + if (data->suspended) { + spin_unlock(&data->lock); + return -ENODEV; + } + + reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) | + (phy_id << 16) | (phy_data & USERACCESS_DATA)); + + while (1) { + ret = wait_for_user_access(data); + if (ret == -EAGAIN) + continue; + if (ret < 0) + break; + + __raw_writel(reg, &data->regs->user[0].access); + + ret = wait_for_user_access(data); + if (ret == -EAGAIN) + continue; + break; + } + + spin_unlock(&data->lock); + + return 0; +} + +static int __devinit davinci_mdio_probe(struct platform_device *pdev) +{ + struct mdio_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct davinci_mdio_data *data; + struct resource *res; + struct phy_device *phy; + int ret, addr; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(dev, "failed to alloc device data\n"); + return -ENOMEM; + } + + data->pdata = pdata ? (*pdata) : default_pdata; + + data->bus = mdiobus_alloc(); + if (!data->bus) { + dev_err(dev, "failed to alloc mii bus\n"); + ret = -ENOMEM; + goto bail_out; + } + + data->bus->name = dev_name(dev); + data->bus->read = davinci_mdio_read, + data->bus->write = davinci_mdio_write, + data->bus->reset = davinci_mdio_reset, + data->bus->parent = dev; + data->bus->priv = data; + snprintf(data->bus->id, MII_BUS_ID_SIZE, "%x", pdev->id); + + data->clk = clk_get(dev, NULL); + if (IS_ERR(data->clk)) { + data->clk = NULL; + dev_err(dev, "failed to get device clock\n"); + ret = PTR_ERR(data->clk); + goto bail_out; + } + + clk_enable(data->clk); + + dev_set_drvdata(dev, data); + data->dev = dev; + spin_lock_init(&data->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "could not find register map resource\n"); + ret = -ENOENT; + goto bail_out; + } + + res = devm_request_mem_region(dev, res->start, resource_size(res), + dev_name(dev)); + if (!res) { + dev_err(dev, "could not allocate register map resource\n"); + ret = -ENXIO; + goto bail_out; + } + + data->regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); + if (!data->regs) { + dev_err(dev, "could not map mdio registers\n"); + ret = -ENOMEM; + goto bail_out; + } + + /* register the mii bus */ + ret = mdiobus_register(data->bus); + if (ret) + goto bail_out; + + /* scan and dump the bus */ + for (addr = 0; addr < PHY_MAX_ADDR; addr++) { + phy = data->bus->phy_map[addr]; + if (phy) { + dev_info(dev, "phy[%d]: device %s, driver %s\n", + phy->addr, dev_name(&phy->dev), + phy->drv ? phy->drv->name : "unknown"); + } + } + + return 0; + +bail_out: + if (data->bus) + mdiobus_free(data->bus); + + if (data->clk) { + clk_disable(data->clk); + clk_put(data->clk); + } + + kfree(data); + + return ret; +} + +static int __devexit davinci_mdio_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct davinci_mdio_data *data = dev_get_drvdata(dev); + + if (data->bus) + mdiobus_free(data->bus); + + if (data->clk) { + clk_disable(data->clk); + clk_put(data->clk); + } + + dev_set_drvdata(dev, NULL); + + kfree(data); + + return 0; +} + +static int davinci_mdio_suspend(struct device *dev) +{ + struct davinci_mdio_data *data = dev_get_drvdata(dev); + u32 ctrl; + + spin_lock(&data->lock); + + /* shutdown the scan state machine */ + ctrl = __raw_readl(&data->regs->control); + ctrl &= ~CONTROL_ENABLE; + __raw_writel(ctrl, &data->regs->control); + wait_for_idle(data); + + if (data->clk) + clk_disable(data->clk); + + data->suspended = true; + spin_unlock(&data->lock); + + return 0; +} + +static int davinci_mdio_resume(struct device *dev) +{ + struct davinci_mdio_data *data = dev_get_drvdata(dev); + u32 ctrl; + + spin_lock(&data->lock); + if (data->clk) + clk_enable(data->clk); + + /* restart the scan state machine */ + ctrl = __raw_readl(&data->regs->control); + ctrl |= CONTROL_ENABLE; + __raw_writel(ctrl, &data->regs->control); + + data->suspended = false; + spin_unlock(&data->lock); + + return 0; +} + +static const struct dev_pm_ops davinci_mdio_pm_ops = { + .suspend = davinci_mdio_suspend, + .resume = davinci_mdio_resume, +}; + +static struct platform_driver davinci_mdio_driver = { + .driver = { + .name = "davinci_mdio", + .owner = THIS_MODULE, + .pm = &davinci_mdio_pm_ops, + }, + .probe = davinci_mdio_probe, + .remove = __devexit_p(davinci_mdio_remove), +}; + +static int __init davinci_mdio_init(void) +{ + return platform_driver_register(&davinci_mdio_driver); +} +device_initcall(davinci_mdio_init); + +static void __exit davinci_mdio_exit(void) +{ + platform_driver_unregister(&davinci_mdio_driver); +} +module_exit(davinci_mdio_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("DaVinci MDIO driver"); diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 40e5c46e7571..465ae7e84507 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -43,6 +43,7 @@ #include <linux/seq_file.h> #include <linux/mii.h> #include <linux/slab.h> +#include <linux/dmi.h> #include <asm/irq.h> #include "skge.h" @@ -3868,6 +3869,8 @@ static void __devinit skge_show_addr(struct net_device *dev) netif_info(skge, probe, skge->netdev, "addr %pM\n", dev->dev_addr); } +static int only_32bit_dma; + static int __devinit skge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -3889,7 +3892,7 @@ static int __devinit skge_probe(struct pci_dev *pdev, pci_set_master(pdev); - if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { + if (!only_32bit_dma && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { using_dac = 1; err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); } else if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) { @@ -4147,8 +4150,21 @@ static struct pci_driver skge_driver = { .shutdown = skge_shutdown, }; +static struct dmi_system_id skge_32bit_dma_boards[] = { + { + .ident = "Gigabyte nForce boards", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co"), + DMI_MATCH(DMI_BOARD_NAME, "nForce"), + }, + }, + {} +}; + static int __init skge_init_module(void) { + if (dmi_check_system(skge_32bit_dma_boards)) + only_32bit_dma = 1; skge_debug_init(); return pci_register_driver(&skge_driver); } diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index cc648b6ae31c..a3d95cca8f0c 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -543,7 +543,7 @@ static u8 ath9k_hw_chan_2_clockrate_mhz(struct ath_hw *ah) if (conf_is_ht40(conf)) return clockrate * 2; - return clockrate * 2; + return clockrate; } static int32_t ath9k_hw_ani_get_listen_time(struct ath_hw *ah) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c index 9dd9e64c2b0b..8fd00a6e5120 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c @@ -1411,7 +1411,7 @@ void iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) clear_bit(STATUS_SCAN_HW, &priv->status); clear_bit(STATUS_SCANNING, &priv->status); /* inform mac80211 scan aborted */ - queue_work(priv->workqueue, &priv->scan_completed); + queue_work(priv->workqueue, &priv->abort_scan); } int iwlagn_manage_ibss_station(struct iwl_priv *priv, diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 59a308b02f95..d31661c1ce77 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -3018,7 +3018,7 @@ void iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) clear_bit(STATUS_SCANNING, &priv->status); /* inform mac80211 scan aborted */ - queue_work(priv->workqueue, &priv->scan_completed); + queue_work(priv->workqueue, &priv->abort_scan); } static void iwl3945_bg_restart(struct work_struct *data) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 89ed181cd90c..857ae01734a6 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -163,6 +163,26 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_d DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); /* + * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear + * for some HT machines to use C4 w/o hanging. + */ +static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev) +{ + u32 pmbase; + u16 pm1a; + + pci_read_config_dword(dev, 0x40, &pmbase); + pmbase = pmbase & 0xff80; + pm1a = inw(pmbase); + + if (pm1a & 0x10) { + dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); + outw(0x10, pmbase); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); + +/* * Chipsets where PCI->PCI transfers vanish or hang */ static void __devinit quirk_nopcipci(struct pci_dev *dev) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 422a709d271d..cc8b337b9119 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -700,7 +700,7 @@ static void print_constraints(struct regulator_dev *rdev) constraints->min_uA != constraints->max_uA) { ret = _regulator_get_current_limit(rdev); if (ret > 0) - count += sprintf(buf + count, "at %d uA ", ret / 1000); + count += sprintf(buf + count, "at %d mA ", ret / 1000); } if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) @@ -2302,8 +2302,10 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, dev_set_name(&rdev->dev, "regulator.%d", atomic_inc_return(®ulator_no) - 1); ret = device_register(&rdev->dev); - if (ret != 0) + if (ret != 0) { + put_device(&rdev->dev); goto clean; + } dev_set_drvdata(&rdev->dev, rdev); diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c index 4520ace3f7e7..6b60a9c0366b 100644 --- a/drivers/regulator/max8649.c +++ b/drivers/regulator/max8649.c @@ -330,7 +330,7 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client, /* set external clock frequency */ info->extclk_freq = pdata->extclk_freq; max8649_set_bits(info->i2c, MAX8649_SYNC, MAX8649_EXT_MASK, - info->extclk_freq); + info->extclk_freq << 6); } if (pdata->ramp_timing) { diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index ad0ed212db4a..348fba0a8976 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -1046,13 +1046,13 @@ int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf, /* If the user actually wanted this page, we can skip the rest */ if (page == 0) - return -EINVAL; + return 0; for (i = 0; i < min((int)buf[3], buf_len - 4); i++) if (buf[i + 4] == page) goto found; - if (i < buf[3] && i > buf_len) + if (i < buf[3] && i >= buf_len - 4) /* ran off the end of the buffer, give us benefit of doubt */ goto found; /* The device claims it doesn't support the requested page */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 12900f7083b0..6ce3ded923fc 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -458,6 +458,7 @@ config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_SAMSUNG default 2 if ARCH_S3C2400 + default 6 if ARCH_S5P6450 default 4 if SERIAL_SAMSUNG_UARTS_4 default 3 help @@ -526,12 +527,12 @@ config SERIAL_S3C24A0 Serial port support for the Samsung S3C24A0 SoC config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100) + tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) select SERIAL_SAMSUNG_UARTS_4 default y help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440 + Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 and S5PC100 SoCs config SERIAL_S5PV210 @@ -1416,6 +1417,33 @@ config SERIAL_OF_PLATFORM Currently, only 8250 compatible ports are supported, but others can easily be added. +config SERIAL_OMAP + tristate "OMAP serial port support" + depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 + select SERIAL_CORE + help + If you have a machine based on an Texas Instruments OMAP CPU you + can enable its onboard serial ports by enabling this option. + + By enabling this option you take advantage of dma feature available + with the omap-serial driver. DMA support can be enabled from platform + data. + +config SERIAL_OMAP_CONSOLE + bool "Console on OMAP serial port" + depends on SERIAL_OMAP + select SERIAL_CORE_CONSOLE + help + Select this option if you would like to use omap serial port as + console. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyOx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + config SERIAL_OF_PLATFORM_NWPSERIAL tristate "NWP serial port driver" depends on PPC_OF && PPC_DCR diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 1ca4fd599ffe..c5705765454f 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -88,3 +88,4 @@ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o +obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c index 324c385a653d..5dff45c76d32 100644 --- a/drivers/serial/mfd.c +++ b/drivers/serial/mfd.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> +#include <linux/slab.h> #include <linux/serial_reg.h> #include <linux/circ_buf.h> #include <linux/delay.h> diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c index f6ad1ecbff79..51c15f58e01e 100644 --- a/drivers/serial/mrst_max3110.c +++ b/drivers/serial/mrst_max3110.c @@ -29,6 +29,7 @@ #include <linux/module.h> #include <linux/ioport.h> +#include <linux/irq.h> #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c new file mode 100644 index 000000000000..2ee1d3282a8c --- /dev/null +++ b/drivers/serial/omap-serial.c @@ -0,0 +1,1333 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R <govindraj.raja@ti.com> + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Note: This driver is made seperate from 8250 driver as we cannot + * over load 8250 driver with omap platform specific configuration for + * features like DMA, it makes easier to implement features like DMA and + * hardware flow control and software flow control configuration with + * this driver as required for the omap-platform. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/serial_reg.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/serial_core.h> +#include <linux/irq.h> + +#include <plat/dma.h> +#include <plat/dmtimer.h> +#include <plat/omap-serial.h> + +static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; + +/* Forward declaration of functions */ +static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); +static void serial_omap_rx_timeout(unsigned long uart_no); +static int serial_omap_start_rxdma(struct uart_omap_port *up); + +static inline unsigned int serial_in(struct uart_omap_port *up, int offset) +{ + offset <<= up->port.regshift; + return readw(up->port.membase + offset); +} + +static inline void serial_out(struct uart_omap_port *up, int offset, int value) +{ + offset <<= up->port.regshift; + writew(value, up->port.membase + offset); +} + +static inline void serial_omap_clear_fifos(struct uart_omap_port *up) +{ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +/* + * serial_omap_get_divisor - calculate divisor value + * @port: uart port info + * @baud: baudrate for which divisor needs to be calculated. + * + * We have written our own function to get the divisor so as to support + * 13x mode. 3Mbps Baudrate as an different divisor. + * Reference OMAP TRM Chapter 17: + * Table 17-1. UART Mode Baud Rates, Divisor Values, and Error Rates + * referring to oversampling - divisor value + * baudrate 460,800 to 3,686,400 all have divisor 13 + * except 3,000,000 which has divisor value 16 + */ +static unsigned int +serial_omap_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int divisor; + + if (baud > OMAP_MODE13X_SPEED && baud != 3000000) + divisor = 13; + else + divisor = 16; + return port->uartclk/(baud * divisor); +} + +static void serial_omap_stop_rxdma(struct uart_omap_port *up) +{ + if (up->uart_dma.rx_dma_used) { + del_timer(&up->uart_dma.rx_timer); + omap_stop_dma(up->uart_dma.rx_dma_channel); + omap_free_dma(up->uart_dma.rx_dma_channel); + up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; + up->uart_dma.rx_dma_used = false; + } +} + +static void serial_omap_enable_ms(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void serial_omap_stop_tx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + if (up->use_dma && + up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) { + /* + * Check if dma is still active. If yes do nothing, + * return. Else stop dma + */ + if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel)) + return; + omap_stop_dma(up->uart_dma.tx_dma_channel); + omap_free_dma(up->uart_dma.tx_dma_channel); + up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; + } + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_omap_stop_rx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + if (up->use_dma) + serial_omap_stop_rxdma(up); + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static inline void receive_chars(struct uart_omap_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned int flag; + unsigned char ch, lsr = *status; + int max_count = 256; + + do { + if (likely(lsr & UART_LSR_DR)) + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { + /* + * For statistics only + */ + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (lsr & UART_LSR_PE) { + up->port.icount.parity++; + } else if (lsr & UART_LSR_FE) { + up->port.icount.frame++; + } + + if (lsr & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + lsr &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + lsr |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (lsr & UART_LSR_BI) + flag = TTY_BREAK; + else if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); +ignore_char: + lsr = serial_in(up, UART_LSR); + } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); +} + +static void transmit_chars(struct uart_omap_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_omap_stop_tx(&up->port); + return; + } + count = up->port.fifosize / 4; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_omap_stop_tx(&up->port); +} + +static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up) +{ + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_omap_start_tx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + struct circ_buf *xmit; + unsigned int start; + int ret = 0; + + if (!up->use_dma) { + serial_omap_enable_ier_thri(up); + return; + } + + if (up->uart_dma.tx_dma_used) + return; + + xmit = &up->port.state->xmit; + + if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) { + ret = omap_request_dma(up->uart_dma.uart_dma_tx, + "UART Tx DMA", + (void *)uart_tx_dma_callback, up, + &(up->uart_dma.tx_dma_channel)); + + if (ret < 0) { + serial_omap_enable_ier_thri(up); + return; + } + } + spin_lock(&(up->uart_dma.tx_lock)); + up->uart_dma.tx_dma_used = true; + spin_unlock(&(up->uart_dma.tx_lock)); + + start = up->uart_dma.tx_buf_dma_phys + + (xmit->tail & (UART_XMIT_SIZE - 1)); + + up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); + /* + * It is a circular buffer. See if the buffer has wounded back. + * If yes it will have to be transferred in two separate dma + * transfers + */ + if (start + up->uart_dma.tx_buf_size >= + up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) + up->uart_dma.tx_buf_size = + (up->uart_dma.tx_buf_dma_phys + + UART_XMIT_SIZE) - start; + + omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, start, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.tx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_tx, 0); + /* FIXME: Cache maintenance needed here? */ + omap_start_dma(up->uart_dma.tx_dma_channel); +} + +static unsigned int check_modem_status(struct uart_omap_port *up) +{ + unsigned int status; + + status = serial_in(up, UART_MSR); + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + if ((status & UART_MSR_ANY_DELTA) == 0) + return status; + + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + up->port.state != NULL) { + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change + (&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change + (&up->port, status & UART_MSR_CTS); + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + return status; +} + +/** + * serial_omap_irq() - This handles the interrupt from one port + * @irq: uart port irq number + * @dev_id: uart port info + */ +static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) +{ + struct uart_omap_port *up = dev_id; + unsigned int iir, lsr; + unsigned long flags; + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + + spin_lock_irqsave(&up->port.lock, flags); + lsr = serial_in(up, UART_LSR); + if (iir & UART_IIR_RLSI) { + if (!up->use_dma) { + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + } else { + up->ier &= ~(UART_IER_RDI | UART_IER_RLSI); + serial_out(up, UART_IER, up->ier); + if ((serial_omap_start_rxdma(up) != 0) && + (lsr & UART_LSR_DR)) + receive_chars(up, &lsr); + } + } + + check_modem_status(up); + if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI)) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + up->port_activity = jiffies; + return IRQ_HANDLED; +} + +static unsigned int serial_omap_tx_empty(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + unsigned int ret = 0; + + dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_omap_get_mctrl(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char status; + unsigned int ret = 0; + + status = check_modem_status(up); + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); + + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char mcr = 0; + + dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + serial_out(up, UART_MCR, mcr); +} + +static void serial_omap_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + + dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int serial_omap_startup(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags, + up->name, up); + if (retval) + return retval; + + dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_omap_clear_fifos(up); + /* For Hardware flow control */ + serial_out(up, UART_MCR, UART_MCR_RTS); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + if (serial_in(up, UART_LSR) & UART_LSR_DR) + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + spin_lock_irqsave(&up->port.lock, flags); + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + up->port.mctrl |= TIOCM_OUT2; + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + up->msr_saved_flags = 0; + if (up->use_dma) { + free_page((unsigned long)up->port.state->xmit.buf); + up->port.state->xmit.buf = dma_alloc_coherent(NULL, + UART_XMIT_SIZE, + (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), + 0); + init_timer(&(up->uart_dma.rx_timer)); + up->uart_dma.rx_timer.function = serial_omap_rx_timeout; + up->uart_dma.rx_timer.data = up->pdev->id; + /* Currently the buffer size is 4KB. Can increase it */ + up->uart_dma.rx_buf = dma_alloc_coherent(NULL, + up->uart_dma.rx_buf_size, + (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0); + } + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + + up->port_activity = jiffies; + return 0; +} + +static void serial_omap_shutdown(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + + dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_omap_clear_fifos(up); + + /* + * Read data port to reset things, and then free the irq + */ + if (serial_in(up, UART_LSR) & UART_LSR_DR) + (void) serial_in(up, UART_RX); + if (up->use_dma) { + dma_free_coherent(up->port.dev, + UART_XMIT_SIZE, up->port.state->xmit.buf, + up->uart_dma.tx_buf_dma_phys); + up->port.state->xmit.buf = NULL; + serial_omap_stop_rx(port); + dma_free_coherent(up->port.dev, + up->uart_dma.rx_buf_size, up->uart_dma.rx_buf, + up->uart_dma.rx_buf_dma_phys); + up->uart_dma.rx_buf = NULL; + } + free_irq(up->port.irq, up); +} + +static inline void +serial_omap_configure_xonxoff + (struct uart_omap_port *up, struct ktermios *termios) +{ + unsigned char efr = 0; + + up->lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB); + + serial_out(up, UART_XON1, termios->c_cc[VSTART]); + serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); + + /* clear SW control mode bits */ + efr = up->efr; + efr &= OMAP_UART_SW_CLR; + + /* + * IXON Flag: + * Enable XON/XOFF flow control on output. + * Transmit XON1, XOFF1 + */ + if (termios->c_iflag & IXON) + efr |= OMAP_UART_SW_TX; + + /* + * IXOFF Flag: + * Enable XON/XOFF flow control on input. + * Receiver compares XON1, XOFF1. + */ + if (termios->c_iflag & IXOFF) + efr |= OMAP_UART_SW_RX; + + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + serial_out(up, UART_LCR, UART_LCR_DLAB); + + up->mcr = serial_in(up, UART_MCR); + + /* + * IXANY Flag: + * Enable any character to restart output. + * Operation resumes after receiving any + * character after recognition of the XOFF character + */ + if (termios->c_iflag & IXANY) + up->mcr |= UART_MCR_XONANY; + + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + /* Enable special char function UARTi.EFR_REG[5] and + * load the new software flow control mode IXON or IXOFF + * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. + */ + serial_out(up, UART_EFR, efr | UART_EFR_SCD); + serial_out(up, UART_LCR, UART_LCR_DLAB); + + serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); + serial_out(up, UART_LCR, up->lcr); +} + +static void +serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char cval = 0; + unsigned char efr = 0; + unsigned long flags = 0; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); + quot = serial_omap_get_divisor(port, baud); + + up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | + UART_FCR_ENABLE_FIFO; + if (up->use_dma) + up->fcr |= UART_FCR_DMA_SELECT; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * Modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, cval); /* reset DLAB */ + + /* FIFOs and DMA Settings */ + + /* FCR can be changed only when the + * baud clock is not running + * DLL_REG and DLH_REG set to 0. + */ + serial_out(up, UART_LCR, UART_LCR_DLAB); + serial_out(up, UART_DLL, 0); + serial_out(up, UART_DLM, 0); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_LCR, UART_LCR_DLAB); + up->mcr = serial_in(up, UART_MCR); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + /* FIFO ENABLE, DMA MODE */ + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + + if (up->use_dma) { + serial_out(up, UART_TI752_TLR, 0); + serial_out(up, UART_OMAP_SCR, + (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8)); + } + + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, UART_LCR_DLAB); + serial_out(up, UART_MCR, up->mcr); + + /* Protocol, Baud Rate, and Interrupt Settings */ + + serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE); + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, 0); + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, cval); + + if (baud > 230400 && baud != 3000000) + serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X); + else + serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X); + + /* Hardware Flow Control Configuration */ + + if (termios->c_cflag & CRTSCTS) { + efr |= (UART_EFR_CTS | UART_EFR_RTS); + serial_out(up, UART_LCR, UART_LCR_DLAB); + + up->mcr = serial_in(up, UART_MCR); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */ + serial_out(up, UART_LCR, UART_LCR_DLAB); + serial_out(up, UART_MCR, up->mcr | UART_MCR_RTS); + serial_out(up, UART_LCR, cval); + } + + serial_omap_set_mctrl(&up->port, up->port.mctrl); + /* Software Flow Control Configuration */ + if (termios->c_iflag & (IXON | IXOFF)) + serial_omap_configure_xonxoff(up, termios); + + spin_unlock_irqrestore(&up->port.lock, flags); + dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); +} + +static void +serial_omap_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char efr; + + dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, efr | UART_EFR_ECB); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); + serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); + serial_out(up, UART_EFR, efr); + serial_out(up, UART_LCR, 0); + /* Enable module level wake up */ + serial_out(up, UART_OMAP_WER, + (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0); +} + +static void serial_omap_release_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_release_port+\n"); +} + +static int serial_omap_request_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_request_port+\n"); + return 0; +} + +static void serial_omap_config_port(struct uart_port *port, int flags) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", + up->pdev->id); + up->port.type = PORT_OMAP; +} + +static int +serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + dev_dbg(port->dev, "serial_omap_verify_port+\n"); + return -EINVAL; +} + +static const char * +serial_omap_type(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); + return up->name; +} + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + +static struct uart_omap_port *serial_omap_console_ports[4]; + +static struct uart_driver serial_omap_reg; + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static inline void wait_for_xmitr(struct uart_omap_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + + udelay(1); + } + } +} + +static void serial_omap_console_putchar(struct uart_port *port, int ch) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +static void +serial_omap_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_omap_port *up = serial_omap_console_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial_omap_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + check_modem_status(up); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init +serial_omap_console_setup(struct console *co, char *options) +{ + struct uart_omap_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (serial_omap_console_ports[co->index] == NULL) + return -ENODEV; + up = serial_omap_console_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console serial_omap_console = { + .name = OMAP_SERIAL_NAME, + .write = serial_omap_console_write, + .device = uart_console_device, + .setup = serial_omap_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_omap_reg, +}; + +static void serial_omap_add_console_port(struct uart_omap_port *up) +{ + serial_omap_console_ports[up->pdev->id] = up; +} + +#define OMAP_CONSOLE (&serial_omap_console) + +#else + +#define OMAP_CONSOLE NULL + +static inline void serial_omap_add_console_port(struct uart_omap_port *up) +{} + +#endif + +static struct uart_ops serial_omap_pops = { + .tx_empty = serial_omap_tx_empty, + .set_mctrl = serial_omap_set_mctrl, + .get_mctrl = serial_omap_get_mctrl, + .stop_tx = serial_omap_stop_tx, + .start_tx = serial_omap_start_tx, + .stop_rx = serial_omap_stop_rx, + .enable_ms = serial_omap_enable_ms, + .break_ctl = serial_omap_break_ctl, + .startup = serial_omap_startup, + .shutdown = serial_omap_shutdown, + .set_termios = serial_omap_set_termios, + .pm = serial_omap_pm, + .type = serial_omap_type, + .release_port = serial_omap_release_port, + .request_port = serial_omap_request_port, + .config_port = serial_omap_config_port, + .verify_port = serial_omap_verify_port, +}; + +static struct uart_driver serial_omap_reg = { + .owner = THIS_MODULE, + .driver_name = "OMAP-SERIAL", + .dev_name = OMAP_SERIAL_NAME, + .nr = OMAP_MAX_HSUART_PORTS, + .cons = OMAP_CONSOLE, +}; + +static int +serial_omap_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct uart_omap_port *up = platform_get_drvdata(pdev); + + if (up) + uart_suspend_port(&serial_omap_reg, &up->port); + return 0; +} + +static int serial_omap_resume(struct platform_device *dev) +{ + struct uart_omap_port *up = platform_get_drvdata(dev); + + if (up) + uart_resume_port(&serial_omap_reg, &up->port); + return 0; +} + +static void serial_omap_rx_timeout(unsigned long uart_no) +{ + struct uart_omap_port *up = ui[uart_no]; + unsigned int curr_dma_pos, curr_transmitted_size; + unsigned int ret = 0; + + curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel); + if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || + (curr_dma_pos == 0)) { + if (jiffies_to_msecs(jiffies - up->port_activity) < + RX_TIMEOUT) { + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + } else { + serial_omap_stop_rxdma(up); + up->ier |= (UART_IER_RDI | UART_IER_RLSI); + serial_out(up, UART_IER, up->ier); + } + return; + } + + curr_transmitted_size = curr_dma_pos - + up->uart_dma.prev_rx_dma_pos; + up->port.icount.rx += curr_transmitted_size; + tty_insert_flip_string(up->port.state->port.tty, + up->uart_dma.rx_buf + + (up->uart_dma.prev_rx_dma_pos - + up->uart_dma.rx_buf_dma_phys), + curr_transmitted_size); + tty_flip_buffer_push(up->port.state->port.tty); + up->uart_dma.prev_rx_dma_pos = curr_dma_pos; + if (up->uart_dma.rx_buf_size + + up->uart_dma.rx_buf_dma_phys == curr_dma_pos) { + ret = serial_omap_start_rxdma(up); + if (ret < 0) { + serial_omap_stop_rxdma(up); + up->ier |= (UART_IER_RDI | UART_IER_RLSI); + serial_out(up, UART_IER, up->ier); + } + } else { + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + } + up->port_activity = jiffies; +} + +static void uart_rx_dma_callback(int lch, u16 ch_status, void *data) +{ + return; +} + +static int serial_omap_start_rxdma(struct uart_omap_port *up) +{ + int ret = 0; + + if (up->uart_dma.rx_dma_channel == -1) { + ret = omap_request_dma(up->uart_dma.uart_dma_rx, + "UART Rx DMA", + (void *)uart_rx_dma_callback, up, + &(up->uart_dma.rx_dma_channel)); + if (ret < 0) + return ret; + + omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, + up->uart_dma.rx_buf_dma_phys, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.rx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_rx, 0); + } + up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys; + /* FIXME: Cache maintenance needed here? */ + omap_start_dma(up->uart_dma.rx_dma_channel); + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + up->uart_dma.rx_dma_used = true; + return ret; +} + +static void serial_omap_continue_tx(struct uart_omap_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + unsigned int start = up->uart_dma.tx_buf_dma_phys + + (xmit->tail & (UART_XMIT_SIZE - 1)); + + if (uart_circ_empty(xmit)) + return; + + up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); + /* + * It is a circular buffer. See if the buffer has wounded back. + * If yes it will have to be transferred in two separate dma + * transfers + */ + if (start + up->uart_dma.tx_buf_size >= + up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) + up->uart_dma.tx_buf_size = + (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start; + omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, start, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.tx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_tx, 0); + /* FIXME: Cache maintenance needed here? */ + omap_start_dma(up->uart_dma.tx_dma_channel); +} + +static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) +{ + struct uart_omap_port *up = (struct uart_omap_port *)data; + struct circ_buf *xmit = &up->port.state->xmit; + + xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \ + (UART_XMIT_SIZE - 1); + up->port.icount.tx += up->uart_dma.tx_buf_size; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) { + spin_lock(&(up->uart_dma.tx_lock)); + serial_omap_stop_tx(&up->port); + up->uart_dma.tx_dma_used = false; + spin_unlock(&(up->uart_dma.tx_lock)); + } else { + omap_stop_dma(up->uart_dma.tx_dma_channel); + serial_omap_continue_tx(up); + } + up->port_activity = jiffies; + return; +} + +static int serial_omap_probe(struct platform_device *pdev) +{ + struct uart_omap_port *up; + struct resource *mem, *irq, *dma_tx, *dma_rx; + struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; + int ret = -ENOSPC; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "no mem resource?\n"); + return -ENODEV; + } + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(&pdev->dev, "no irq resource?\n"); + return -ENODEV; + } + + if (!request_mem_region(mem->start, (mem->end - mem->start) + 1, + pdev->dev.driver->name)) { + dev_err(&pdev->dev, "memory region already claimed\n"); + return -EBUSY; + } + + dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!dma_rx) { + ret = -EINVAL; + goto err; + } + + dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!dma_tx) { + ret = -EINVAL; + goto err; + } + + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (up == NULL) { + ret = -ENOMEM; + goto do_release_region; + } + sprintf(up->name, "OMAP UART%d", pdev->id); + up->pdev = pdev; + up->port.dev = &pdev->dev; + up->port.type = PORT_OMAP; + up->port.iotype = UPIO_MEM; + up->port.irq = irq->start; + + up->port.regshift = 2; + up->port.fifosize = 64; + up->port.ops = &serial_omap_pops; + up->port.line = pdev->id; + + up->port.membase = omap_up_info->membase; + up->port.mapbase = omap_up_info->mapbase; + up->port.flags = omap_up_info->flags; + up->port.irqflags = omap_up_info->irqflags; + up->port.uartclk = omap_up_info->uartclk; + up->uart_dma.uart_base = mem->start; + + if (omap_up_info->dma_enabled) { + up->uart_dma.uart_dma_tx = dma_tx->start; + up->uart_dma.uart_dma_rx = dma_rx->start; + up->use_dma = 1; + up->uart_dma.rx_buf_size = 4096; + up->uart_dma.rx_timeout = 2; + spin_lock_init(&(up->uart_dma.tx_lock)); + spin_lock_init(&(up->uart_dma.rx_lock)); + up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; + up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; + } + + ui[pdev->id] = up; + serial_omap_add_console_port(up); + + ret = uart_add_one_port(&serial_omap_reg, &up->port); + if (ret != 0) + goto do_release_region; + + platform_set_drvdata(pdev, up); + return 0; +err: + dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", + pdev->id, __func__, ret); +do_release_region: + release_mem_region(mem->start, (mem->end - mem->start) + 1); + return ret; +} + +static int serial_omap_remove(struct platform_device *dev) +{ + struct uart_omap_port *up = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + if (up) { + uart_remove_one_port(&serial_omap_reg, &up->port); + kfree(up); + } + return 0; +} + +static struct platform_driver serial_omap_driver = { + .probe = serial_omap_probe, + .remove = serial_omap_remove, + + .suspend = serial_omap_suspend, + .resume = serial_omap_resume, + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init serial_omap_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_omap_reg); + if (ret != 0) + return ret; + ret = platform_driver_register(&serial_omap_driver); + if (ret != 0) + uart_unregister_driver(&serial_omap_reg); + return ret; +} + +static void __exit serial_omap_exit(void) +{ + platform_driver_unregister(&serial_omap_driver); + uart_unregister_driver(&serial_omap_reg); +} + +module_init(serial_omap_init); +module_exit(serial_omap_exit); + +MODULE_DESCRIPTION("OMAP High Speed UART driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index b1156ba8ad14..7ac2bf5167cd 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1101,7 +1101,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); port->mapbase = res->start; - port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000); + port->membase = S3C_VA_UART + (res->start & 0xfffff); ret = platform_get_irq(platdev, 0); if (ret < 0) port->irq = 0; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 91c2f4f3af10..7e631fa51098 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -143,10 +143,26 @@ config SPI_GPIO GPIO operations, you should be able to leverage that for better speed with a custom version of this driver; see the source code. +config SPI_IMX_VER_IMX1 + def_bool y if SOC_IMX1 + +config SPI_IMX_VER_0_0 + def_bool y if SOC_IMX21 || SOC_IMX27 + +config SPI_IMX_VER_0_4 + def_bool y if ARCH_MX31 + +config SPI_IMX_VER_0_7 + def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51 + +config SPI_IMX_VER_2_3 + def_bool y if ARCH_MX51 + config SPI_IMX tristate "Freescale i.MX SPI controllers" depends on ARCH_MXC select SPI_BITBANG + default m if IMX_HAVE_PLATFORM_SPI_IMX help This enables using the Freescale i.MX SPI controllers in master mode. diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 0bcf4c1601a2..b5a78a1f4421 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/cache.h> #include <linux/mutex.h> +#include <linux/of_device.h> #include <linux/slab.h> #include <linux/mod_devicetable.h> #include <linux/spi/spi.h> @@ -86,6 +87,10 @@ static int spi_match_device(struct device *dev, struct device_driver *drv) const struct spi_device *spi = to_spi_device(dev); const struct spi_driver *sdrv = to_spi_driver(drv); + /* Attempt an OF style match */ + if (of_driver_match_device(dev, drv)) + return 1; + if (sdrv->id_table) return !!spi_match_id(sdrv->id_table, spi); diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c index e24a63498acb..63e51b011d50 100644 --- a/drivers/spi/spi_gpio.c +++ b/drivers/spi/spi_gpio.c @@ -350,7 +350,7 @@ static int __init spi_gpio_probe(struct platform_device *pdev) spi_gpio->bitbang.master = spi_master_get(master); spi_gpio->bitbang.chipselect = spi_gpio_chipselect; - if ((master_flags & (SPI_MASTER_NO_RX | SPI_MASTER_NO_RX)) == 0) { + if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) { spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0; spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1; spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2; diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 7972e9077473..6bab2cfd93c1 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -56,7 +56,27 @@ struct spi_imx_config { unsigned int speed_hz; unsigned int bpw; unsigned int mode; - int cs; + u8 cs; +}; + +enum spi_imx_devtype { + SPI_IMX_VER_IMX1, + SPI_IMX_VER_0_0, + SPI_IMX_VER_0_4, + SPI_IMX_VER_0_5, + SPI_IMX_VER_0_7, + SPI_IMX_VER_2_3, + SPI_IMX_VER_AUTODETECT, +}; + +struct spi_imx_data; + +struct spi_imx_devtype_data { + void (*intctrl)(struct spi_imx_data *, int); + int (*config)(struct spi_imx_data *, struct spi_imx_config *); + void (*trigger)(struct spi_imx_data *); + int (*rx_available)(struct spi_imx_data *); + void (*reset)(struct spi_imx_data *); }; struct spi_imx_data { @@ -76,11 +96,7 @@ struct spi_imx_data { const void *tx_buf; unsigned int txfifo; /* number of words pushed in tx FIFO */ - /* SoC specific functions */ - void (*intctrl)(struct spi_imx_data *, int); - int (*config)(struct spi_imx_data *, struct spi_imx_config *); - void (*trigger)(struct spi_imx_data *); - int (*rx_available)(struct spi_imx_data *); + struct spi_imx_devtype_data devtype_data; }; #define MXC_SPI_BUF_RX(type) \ @@ -140,7 +156,7 @@ static unsigned int spi_imx_clkdiv_1(unsigned int fin, return max; } -/* MX1, MX31, MX35 */ +/* MX1, MX31, MX35, MX51 CSPI */ static unsigned int spi_imx_clkdiv_2(unsigned int fin, unsigned int fspi) { @@ -155,6 +171,128 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, return 7; } +#define SPI_IMX2_3_CTRL 0x08 +#define SPI_IMX2_3_CTRL_ENABLE (1 << 0) +#define SPI_IMX2_3_CTRL_XCH (1 << 2) +#define SPI_IMX2_3_CTRL_MODE(cs) (1 << ((cs) + 4)) +#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8 +#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12 +#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18) +#define SPI_IMX2_3_CTRL_BL_OFFSET 20 + +#define SPI_IMX2_3_CONFIG 0x0c +#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) +#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) +#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) +#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) + +#define SPI_IMX2_3_INT 0x10 +#define SPI_IMX2_3_INT_TEEN (1 << 0) +#define SPI_IMX2_3_INT_RREN (1 << 3) + +#define SPI_IMX2_3_STAT 0x18 +#define SPI_IMX2_3_STAT_RR (1 << 3) + +/* MX51 eCSPI */ +static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi) +{ + /* + * there are two 4-bit dividers, the pre-divider divides by + * $pre, the post-divider by 2^$post + */ + unsigned int pre, post; + + if (unlikely(fspi > fin)) + return 0; + + post = fls(fin) - fls(fspi); + if (fin > fspi << post) + post++; + + /* now we have: (fin <= fspi << post) with post being minimal */ + + post = max(4U, post) - 4; + if (unlikely(post > 0xf)) { + pr_err("%s: cannot set clock freq: %u (base freq: %u)\n", + __func__, fspi, fin); + return 0xff; + } + + pre = DIV_ROUND_UP(fin, fspi << post) - 1; + + pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n", + __func__, fin, fspi, post, pre); + return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) | + (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET); +} + +static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable) +{ + unsigned val = 0; + + if (enable & MXC_INT_TE) + val |= SPI_IMX2_3_INT_TEEN; + + if (enable & MXC_INT_RR) + val |= SPI_IMX2_3_INT_RREN; + + writel(val, spi_imx->base + SPI_IMX2_3_INT); +} + +static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx) +{ + u32 reg; + + reg = readl(spi_imx->base + SPI_IMX2_3_CTRL); + reg |= SPI_IMX2_3_CTRL_XCH; + writel(reg, spi_imx->base + SPI_IMX2_3_CTRL); +} + +static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0; + + /* set master mode */ + ctrl |= SPI_IMX2_3_CTRL_MODE(config->cs); + + /* set clock speed */ + ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz); + + /* set chip select to use */ + ctrl |= SPI_IMX2_3_CTRL_CS(config->cs); + + ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET; + + cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs); + + if (config->mode & SPI_CPHA) + cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs); + + if (config->mode & SPI_CPOL) + cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs); + + if (config->mode & SPI_CS_HIGH) + cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs); + + writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL); + writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG); + + return 0; +} + +static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx) +{ + return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR; +} + +static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx) +{ + /* drain receive buffer */ + while (spi_imx2_3_rx_available(spi_imx)) + readl(spi_imx->base + MXC_CSPIRXDATA); +} + #define MX31_INTREG_TEEN (1 << 0) #define MX31_INTREG_RREN (1 << 3) @@ -178,7 +316,7 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, * the i.MX35 has a slightly different register layout for bits * we do not use here. */ -static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx31_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -190,7 +328,7 @@ static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable) writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx31_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; @@ -199,20 +337,16 @@ static void mx31_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx31_config(struct spi_imx_data *spi_imx, +static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << MX31_CSPICTRL_DR_SHIFT; - if (cpu_is_mx31()) - reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; - else if (cpu_is_mx25() || cpu_is_mx35()) { - reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; - reg |= MX31_CSPICTRL_SSCTL; - } + reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; if (config->mode & SPI_CPHA) reg |= MX31_CSPICTRL_PHA; @@ -220,23 +354,52 @@ static int mx31_config(struct spi_imx_data *spi_imx, reg |= MX31_CSPICTRL_POL; if (config->mode & SPI_CS_HIGH) reg |= MX31_CSPICTRL_SSPOL; - if (config->cs < 0) { - if (cpu_is_mx31()) - reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT; - else if (cpu_is_mx25() || cpu_is_mx35()) - reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT; - } + if (cs < 0) + reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT; + + writel(reg, spi_imx->base + MXC_CSPICTRL); + + return 0; +} + +static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; + + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << + MX31_CSPICTRL_DR_SHIFT; + + reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; + reg |= MX31_CSPICTRL_SSCTL; + + if (config->mode & SPI_CPHA) + reg |= MX31_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX31_CSPICTRL_POL; + if (config->mode & SPI_CS_HIGH) + reg |= MX31_CSPICTRL_SSPOL; + if (cs < 0) + reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT; writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int mx31_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx) { return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR; } +static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx) +{ + /* drain receive buffer */ + while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR) + readl(spi_imx->base + MXC_CSPIRXDATA); +} + #define MX27_INTREG_RR (1 << 4) #define MX27_INTREG_TEEN (1 << 9) #define MX27_INTREG_RREN (1 << 13) @@ -250,7 +413,7 @@ static int mx31_rx_available(struct spi_imx_data *spi_imx) #define MX27_CSPICTRL_DR_SHIFT 14 #define MX27_CSPICTRL_CS_SHIFT 19 -static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -262,7 +425,7 @@ static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable) writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx27_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; @@ -271,10 +434,11 @@ static void mx27_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx27_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) << MX27_CSPICTRL_DR_SHIFT; @@ -286,19 +450,24 @@ static int mx27_config(struct spi_imx_data *spi_imx, reg |= MX27_CSPICTRL_POL; if (config->mode & SPI_CS_HIGH) reg |= MX27_CSPICTRL_SSPOL; - if (config->cs < 0) - reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT; + if (cs < 0) + reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT; writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int mx27_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx) { return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR; } +static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx) +{ + writel(1, spi_imx->base + MXC_RESET); +} + #define MX1_INTREG_RR (1 << 3) #define MX1_INTREG_TEEN (1 << 8) #define MX1_INTREG_RREN (1 << 11) @@ -310,7 +479,7 @@ static int mx27_rx_available(struct spi_imx_data *spi_imx) #define MX1_CSPICTRL_MASTER (1 << 10) #define MX1_CSPICTRL_DR_SHIFT 13 -static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx1_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -322,7 +491,7 @@ static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable) writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx1_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; @@ -331,7 +500,7 @@ static void mx1_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx1_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER; @@ -350,11 +519,68 @@ static int mx1_config(struct spi_imx_data *spi_imx, return 0; } -static int mx1_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx) { return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR; } +static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx) +{ + writel(1, spi_imx->base + MXC_RESET); +} + +/* + * These version numbers are taken from the Freescale driver. Unfortunately it + * doesn't support i.MX1, so this entry doesn't match the scheme. :-( + */ +static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = { +#ifdef CONFIG_SPI_IMX_VER_IMX1 + [SPI_IMX_VER_IMX1] = { + .intctrl = mx1_intctrl, + .config = mx1_config, + .trigger = mx1_trigger, + .rx_available = mx1_rx_available, + .reset = mx1_reset, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_0 + [SPI_IMX_VER_0_0] = { + .intctrl = mx27_intctrl, + .config = mx27_config, + .trigger = mx27_trigger, + .rx_available = mx27_rx_available, + .reset = spi_imx0_0_reset, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_4 + [SPI_IMX_VER_0_4] = { + .intctrl = mx31_intctrl, + .config = spi_imx0_4_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = spi_imx0_4_reset, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_7 + [SPI_IMX_VER_0_7] = { + .intctrl = mx31_intctrl, + .config = spi_imx0_7_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = spi_imx0_4_reset, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_2_3 + [SPI_IMX_VER_2_3] = { + .intctrl = spi_imx2_3_intctrl, + .config = spi_imx2_3_config, + .trigger = spi_imx2_3_trigger, + .rx_available = spi_imx2_3_rx_available, + .reset = spi_imx2_3_reset, + }, +#endif +}; + static void spi_imx_chipselect(struct spi_device *spi, int is_active) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); @@ -377,14 +603,14 @@ static void spi_imx_push(struct spi_imx_data *spi_imx) spi_imx->txfifo++; } - spi_imx->trigger(spi_imx); + spi_imx->devtype_data.trigger(spi_imx); } static irqreturn_t spi_imx_isr(int irq, void *dev_id) { struct spi_imx_data *spi_imx = dev_id; - while (spi_imx->rx_available(spi_imx)) { + while (spi_imx->devtype_data.rx_available(spi_imx)) { spi_imx->rx(spi_imx); spi_imx->txfifo--; } @@ -398,11 +624,12 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id) /* No data left to push, but still waiting for rx data, * enable receive data available interrupt. */ - spi_imx->intctrl(spi_imx, MXC_INT_RR); + spi_imx->devtype_data.intctrl( + spi_imx, MXC_INT_RR); return IRQ_HANDLED; } - spi_imx->intctrl(spi_imx, 0); + spi_imx->devtype_data.intctrl(spi_imx, 0); complete(&spi_imx->xfer_done); return IRQ_HANDLED; @@ -417,7 +644,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, config.bpw = t ? t->bits_per_word : spi->bits_per_word; config.speed_hz = t ? t->speed_hz : spi->max_speed_hz; config.mode = spi->mode; - config.cs = spi_imx->chipselect[spi->chip_select]; + config.cs = spi->chip_select; if (!config.speed_hz) config.speed_hz = spi->max_speed_hz; @@ -439,7 +666,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, } else BUG(); - spi_imx->config(spi_imx, &config); + spi_imx->devtype_data.config(spi_imx, &config); return 0; } @@ -458,7 +685,7 @@ static int spi_imx_transfer(struct spi_device *spi, spi_imx_push(spi_imx); - spi_imx->intctrl(spi_imx, MXC_INT_TE); + spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE); wait_for_completion(&spi_imx->xfer_done); @@ -485,6 +712,39 @@ static void spi_imx_cleanup(struct spi_device *spi) { } +static struct platform_device_id spi_imx_devtype[] = { + { + .name = DRIVER_NAME, + .driver_data = SPI_IMX_VER_AUTODETECT, + }, { + .name = "imx1-cspi", + .driver_data = SPI_IMX_VER_IMX1, + }, { + .name = "imx21-cspi", + .driver_data = SPI_IMX_VER_0_0, + }, { + .name = "imx25-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx27-cspi", + .driver_data = SPI_IMX_VER_0_0, + }, { + .name = "imx31-cspi", + .driver_data = SPI_IMX_VER_0_4, + }, { + .name = "imx35-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx51-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx51-ecspi", + .driver_data = SPI_IMX_VER_2_3, + }, { + /* sentinel */ + } +}; + static int __devinit spi_imx_probe(struct platform_device *pdev) { struct spi_imx_master *mxc_platform_info; @@ -536,6 +796,31 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) init_completion(&spi_imx->xfer_done); + if (pdev->id_entry->driver_data == SPI_IMX_VER_AUTODETECT) { + if (cpu_is_mx25() || cpu_is_mx35()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_0_7]; + else if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_0_4]; + else if (cpu_is_mx27() || cpu_is_mx21()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_0_0]; + else if (cpu_is_mx1()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_IMX1]; + else + BUG(); + } else + spi_imx->devtype_data = + spi_imx_devtype_data[pdev->id_entry->driver_data]; + + if (!spi_imx->devtype_data.intctrl) { + dev_err(&pdev->dev, "no support for this device compiled in\n"); + ret = -ENODEV; + goto out_gpio_free; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "can't get platform resource\n"); @@ -567,24 +852,6 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) goto out_iounmap; } - if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) { - spi_imx->intctrl = mx31_intctrl; - spi_imx->config = mx31_config; - spi_imx->trigger = mx31_trigger; - spi_imx->rx_available = mx31_rx_available; - } else if (cpu_is_mx27() || cpu_is_mx21()) { - spi_imx->intctrl = mx27_intctrl; - spi_imx->config = mx27_config; - spi_imx->trigger = mx27_trigger; - spi_imx->rx_available = mx27_rx_available; - } else if (cpu_is_mx1()) { - spi_imx->intctrl = mx1_intctrl; - spi_imx->config = mx1_config; - spi_imx->trigger = mx1_trigger; - spi_imx->rx_available = mx1_rx_available; - } else - BUG(); - spi_imx->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(spi_imx->clk)) { dev_err(&pdev->dev, "unable to get clock\n"); @@ -595,15 +862,9 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) clk_enable(spi_imx->clk); spi_imx->spi_clk = clk_get_rate(spi_imx->clk); - if (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) - writel(1, spi_imx->base + MXC_RESET); - - /* drain receive buffer */ - if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) - while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR) - readl(spi_imx->base + MXC_CSPIRXDATA); + spi_imx->devtype_data.reset(spi_imx); - spi_imx->intctrl(spi_imx, 0); + spi_imx->devtype_data.intctrl(spi_imx, 0); ret = spi_bitbang_start(&spi_imx->bitbang); if (ret) { @@ -668,6 +929,7 @@ static struct platform_driver spi_imx_driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, }, + .id_table = spi_imx_devtype, .probe = spi_imx_probe, .remove = __devexit_p(spi_imx_remove), }; diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index d31b57f7baaf..1dd86b835cd8 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -408,11 +408,17 @@ static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) xfer_ofs = mspi->xfer_in_progress->len - mspi->count; - out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs); + if (mspi->rx_dma == mspi->dma_dummy_rx) + out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma); + else + out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs); out_be16(&rx_bd->cbd_datlen, 0); out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP); - out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs); + if (mspi->tx_dma == mspi->dma_dummy_tx) + out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma); + else + out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs); out_be16(&tx_bd->cbd_datlen, xfer_len); out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP | BD_SC_LAST); diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index f81e4f025f23..7f472a57490e 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -54,7 +54,6 @@ #include <plat/dma.h> #include <plat/usb.h> -#include <plat/control.h> #include "omap_udc.h" @@ -2309,21 +2308,12 @@ static char *trx_mode(unsigned m, int enabled) static int proc_otg_show(struct seq_file *s) { u32 tmp; - u32 trans; - char *ctrl_name; + u32 trans = 0; + char *ctrl_name = "(UNKNOWN)"; + /* XXX This needs major revision for OMAP2+ */ tmp = omap_readl(OTG_REV); - if (cpu_is_omap24xx()) { - /* - * REVISIT: Not clear how this works on OMAP2. trans - * is ANDed to produce bits 7 and 8, which might make - * sense for USB_TRANSCEIVER_CTRL on OMAP1, - * but with CONTROL_DEVCONF, these bits have something to - * do with the frame adjustment counter and McBSP2. - */ - ctrl_name = "control_devconf"; - trans = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - } else { + if (cpu_class_is_omap1()) { ctrl_name = "tranceiver_ctrl"; trans = omap_readw(USB_TRANSCEIVER_CTRL); } diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 76b58abf4451..dbbc5801a0c3 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -38,11 +38,11 @@ #include <linux/err.h> #include <linux/platform_device.h> #include <linux/moduleparam.h> -#include <linux/clk.h> #include <linux/bitops.h> #include <linux/io.h> #include <linux/uaccess.h> #include <linux/slab.h> +#include <linux/pm_runtime.h> #include <mach/hardware.h> #include <plat/prcm.h> @@ -61,8 +61,6 @@ struct omap_wdt_dev { void __iomem *base; /* physical */ struct device *dev; int omap_wdt_users; - struct clk *ick; - struct clk *fck; struct resource *mem; struct miscdevice omap_wdt_miscdev; }; @@ -146,8 +144,7 @@ static int omap_wdt_open(struct inode *inode, struct file *file) if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users))) return -EBUSY; - clk_enable(wdev->ick); /* Enable the interface clock */ - clk_enable(wdev->fck); /* Enable the functional clock */ + pm_runtime_get_sync(wdev->dev); /* initialize prescaler */ while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01) @@ -177,8 +174,7 @@ static int omap_wdt_release(struct inode *inode, struct file *file) omap_wdt_disable(wdev); - clk_disable(wdev->ick); - clk_disable(wdev->fck); + pm_runtime_put_sync(wdev->dev); #else printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n"); #endif @@ -292,19 +288,7 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev) wdev->omap_wdt_users = 0; wdev->mem = mem; - - wdev->ick = clk_get(&pdev->dev, "ick"); - if (IS_ERR(wdev->ick)) { - ret = PTR_ERR(wdev->ick); - wdev->ick = NULL; - goto err_clk; - } - wdev->fck = clk_get(&pdev->dev, "fck"); - if (IS_ERR(wdev->fck)) { - ret = PTR_ERR(wdev->fck); - wdev->fck = NULL; - goto err_clk; - } + wdev->dev = &pdev->dev; wdev->base = ioremap(res->start, resource_size(res)); if (!wdev->base) { @@ -314,8 +298,8 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev) platform_set_drvdata(pdev, wdev); - clk_enable(wdev->ick); - clk_enable(wdev->fck); + pm_runtime_enable(wdev->dev); + pm_runtime_get_sync(wdev->dev); omap_wdt_disable(wdev); omap_wdt_adjust_timeout(timer_margin); @@ -333,11 +317,7 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev) __raw_readl(wdev->base + OMAP_WATCHDOG_REV) & 0xFF, timer_margin); - /* autogate OCP interface clock */ - __raw_writel(0x01, wdev->base + OMAP_WATCHDOG_SYS_CONFIG); - - clk_disable(wdev->ick); - clk_disable(wdev->fck); + pm_runtime_put_sync(wdev->dev); omap_wdt_dev = pdev; @@ -349,12 +329,6 @@ err_misc: err_ioremap: wdev->base = NULL; - -err_clk: - if (wdev->ick) - clk_put(wdev->ick); - if (wdev->fck) - clk_put(wdev->fck); kfree(wdev); err_kzalloc: @@ -386,8 +360,6 @@ static int __devexit omap_wdt_remove(struct platform_device *pdev) release_mem_region(res->start, resource_size(res)); platform_set_drvdata(pdev, NULL); - clk_put(wdev->ick); - clk_put(wdev->fck); iounmap(wdev->base); kfree(wdev); diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 29bac5118877..d409495876f1 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -755,7 +755,10 @@ int register_xenstore_notifier(struct notifier_block *nb) { int ret = 0; - blocking_notifier_chain_register(&xenstore_chain, nb); + if (xenstored_ready > 0) + ret = nb->notifier_call(nb, 0, NULL); + else + blocking_notifier_chain_register(&xenstore_chain, nb); return ret; } @@ -769,7 +772,7 @@ EXPORT_SYMBOL_GPL(unregister_xenstore_notifier); void xenbus_probe(struct work_struct *unused) { - BUG_ON((xenstored_ready <= 0)); + xenstored_ready = 1; /* Enumerate devices in xenstore and watch for changes. */ xenbus_probe_devices(&xenbus_frontend); @@ -835,8 +838,8 @@ static int __init xenbus_init(void) xen_store_evtchn = xen_start_info->store_evtchn; xen_store_mfn = xen_start_info->store_mfn; xen_store_interface = mfn_to_virt(xen_store_mfn); + xenstored_ready = 1; } - xenstored_ready = 1; } /* Initialize the interface to xenstore. */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index c65c3419dd37..7e83b356cc9e 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -232,7 +232,7 @@ static int small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, void **request_buf) { - int rc = 0; + int rc; rc = cifs_reconnect_tcon(tcon, smb_command); if (rc) @@ -250,7 +250,7 @@ small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, if (tcon != NULL) cifs_stats_inc(&tcon->num_smbs_sent); - return rc; + return 0; } int @@ -281,16 +281,9 @@ small_smb_init_no_tc(const int smb_command, const int wct, /* If the return code is zero, this function must fill in request_buf pointer */ static int -smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, - void **request_buf /* returned */ , - void **response_buf /* returned */ ) +__smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, + void **request_buf, void **response_buf) { - int rc = 0; - - rc = cifs_reconnect_tcon(tcon, smb_command); - if (rc) - return rc; - *request_buf = cifs_buf_get(); if (*request_buf == NULL) { /* BB should we add a retry in here if not a writepage? */ @@ -309,7 +302,31 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, if (tcon != NULL) cifs_stats_inc(&tcon->num_smbs_sent); - return rc; + return 0; +} + +/* If the return code is zero, this function must fill in request_buf pointer */ +static int +smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, + void **request_buf, void **response_buf) +{ + int rc; + + rc = cifs_reconnect_tcon(tcon, smb_command); + if (rc) + return rc; + + return __smb_init(smb_command, wct, tcon, request_buf, response_buf); +} + +static int +smb_init_no_reconnect(int smb_command, int wct, struct cifsTconInfo *tcon, + void **request_buf, void **response_buf) +{ + if (tcon->ses->need_reconnect || tcon->need_reconnect) + return -EHOSTDOWN; + + return __smb_init(smb_command, wct, tcon, request_buf, response_buf); } static int validate_t2(struct smb_t2_rsp *pSMB) @@ -4534,8 +4551,8 @@ CIFSSMBQFSUnixInfo(const int xid, struct cifsTconInfo *tcon) cFYI(1, "In QFSUnixInfo"); QFSUnixRetry: - rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB, - (void **) &pSMBr); + rc = smb_init_no_reconnect(SMB_COM_TRANSACTION2, 15, tcon, + (void **) &pSMB, (void **) &pSMBr); if (rc) return rc; @@ -4604,8 +4621,8 @@ CIFSSMBSetFSUnixInfo(const int xid, struct cifsTconInfo *tcon, __u64 cap) cFYI(1, "In SETFSUnixInfo"); SETFSUnixRetry: /* BB switch to small buf init to save memory */ - rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB, - (void **) &pSMBr); + rc = smb_init_no_reconnect(SMB_COM_TRANSACTION2, 15, tcon, + (void **) &pSMB, (void **) &pSMBr); if (rc) return rc; diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 93f77d438d3c..53cce8cc2224 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -801,6 +801,8 @@ retry_iget5_locked: inode->i_flags |= S_NOATIME | S_NOCMTIME; if (inode->i_state & I_NEW) { inode->i_ino = hash; + if (S_ISREG(inode->i_mode)) + inode->i_data.backing_dev_info = sb->s_bdi; #ifdef CONFIG_CIFS_FSCACHE /* initialize per-inode cache cookie pointer */ CIFS_I(inode)->fscache = NULL; diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 5581122bd2c0..ab38fef1c9a1 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -72,22 +72,11 @@ int writeback_in_progress(struct backing_dev_info *bdi) static inline struct backing_dev_info *inode_to_bdi(struct inode *inode) { struct super_block *sb = inode->i_sb; - struct backing_dev_info *bdi = inode->i_mapping->backing_dev_info; - /* - * For inodes on standard filesystems, we use superblock's bdi. For - * inodes on virtual filesystems, we want to use inode mapping's bdi - * because they can possibly point to something useful (think about - * block_dev filesystem). - */ - if (sb->s_bdi && sb->s_bdi != &noop_backing_dev_info) { - /* Some device inodes could play dirty tricks. Catch them... */ - WARN(bdi != sb->s_bdi && bdi_cap_writeback_dirty(bdi), - "Dirtiable inode bdi %s != sb bdi %s\n", - bdi->name, sb->s_bdi->name); - return sb->s_bdi; - } - return bdi; + if (strcmp(sb->s_type->name, "bdev") == 0) + return inode->i_mapping->backing_dev_info; + + return sb->s_bdi; } static void bdi_queue_work(struct backing_dev_info *bdi, diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index d367af1514ef..cde755cca564 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -1354,7 +1354,7 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode, loff_t file_size; unsigned int num; unsigned int offset; - size_t total_len; + size_t total_len = 0; req = fuse_get_req(fc); if (IS_ERR(req)) diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c index 32499d213fc4..9975457c981f 100644 --- a/fs/ocfs2/symlink.c +++ b/fs/ocfs2/symlink.c @@ -128,7 +128,7 @@ static void *ocfs2_fast_follow_link(struct dentry *dentry, } /* Fast symlinks can't be large */ - len = strlen(target); + len = strnlen(target, ocfs2_fast_symlink_chars(inode->i_sb)); link = kzalloc(len + 1, GFP_NOFS); if (!link) { status = -ENOMEM; diff --git a/fs/proc/base.c b/fs/proc/base.c index a1c43e7c8a7b..8e4addaa5424 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2675,7 +2675,7 @@ static const struct pid_entry tgid_base_stuff[] = { INF("auxv", S_IRUSR, proc_pid_auxv), ONE("status", S_IRUGO, proc_pid_status), ONE("personality", S_IRUSR, proc_pid_personality), - INF("limits", S_IRUSR, proc_pid_limits), + INF("limits", S_IRUGO, proc_pid_limits), #ifdef CONFIG_SCHED_DEBUG REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations), #endif @@ -3011,7 +3011,7 @@ static const struct pid_entry tid_base_stuff[] = { INF("auxv", S_IRUSR, proc_pid_auxv), ONE("status", S_IRUGO, proc_pid_status), ONE("personality", S_IRUSR, proc_pid_personality), - INF("limits", S_IRUSR, proc_pid_limits), + INF("limits", S_IRUGO, proc_pid_limits), #ifdef CONFIG_SCHED_DEBUG REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations), #endif diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c index f53505de0712..5cbb81e134ac 100644 --- a/fs/reiserfs/ioctl.c +++ b/fs/reiserfs/ioctl.c @@ -170,6 +170,7 @@ int reiserfs_prepare_write(struct file *f, struct page *page, int reiserfs_unpack(struct inode *inode, struct file *filp) { int retval = 0; + int depth; int index; struct page *page; struct address_space *mapping; @@ -188,8 +189,8 @@ int reiserfs_unpack(struct inode *inode, struct file *filp) /* we need to make sure nobody is changing the file size beneath ** us */ - mutex_lock(&inode->i_mutex); - reiserfs_write_lock(inode->i_sb); + reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb); + depth = reiserfs_write_lock_once(inode->i_sb); write_from = inode->i_size & (blocksize - 1); /* if we are on a block boundary, we are already unpacked. */ @@ -224,6 +225,6 @@ int reiserfs_unpack(struct inode *inode, struct file *filp) out: mutex_unlock(&inode->i_mutex); - reiserfs_write_unlock(inode->i_sb); + reiserfs_write_unlock_once(inode->i_sb, depth); return retval; } diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c index ed575fb4b495..7e206fc1fa36 100644 --- a/fs/xfs/xfs_log_cil.c +++ b/fs/xfs/xfs_log_cil.c @@ -405,9 +405,15 @@ xlog_cil_push( new_ctx = kmem_zalloc(sizeof(*new_ctx), KM_SLEEP|KM_NOFS); new_ctx->ticket = xlog_cil_ticket_alloc(log); - /* lock out transaction commit, but don't block on background push */ + /* + * Lock out transaction commit, but don't block for background pushes + * unless we are well over the CIL space limit. See the definition of + * XLOG_CIL_HARD_SPACE_LIMIT() for the full explanation of the logic + * used here. + */ if (!down_write_trylock(&cil->xc_ctx_lock)) { - if (!push_seq) + if (!push_seq && + cil->xc_ctx->space_used < XLOG_CIL_HARD_SPACE_LIMIT(log)) goto out_free_ticket; down_write(&cil->xc_ctx_lock); } @@ -422,7 +428,7 @@ xlog_cil_push( goto out_skip; /* check for a previously pushed seqeunce */ - if (push_seq < cil->xc_ctx->sequence) + if (push_seq && push_seq < cil->xc_ctx->sequence) goto out_skip; /* diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h index ced52b98b322..edcdfe01617f 100644 --- a/fs/xfs/xfs_log_priv.h +++ b/fs/xfs/xfs_log_priv.h @@ -426,13 +426,13 @@ struct xfs_cil { }; /* - * The amount of log space we should the CIL to aggregate is difficult to size. - * Whatever we chose we have to make we can get a reservation for the log space - * effectively, that it is large enough to capture sufficient relogging to - * reduce log buffer IO significantly, but it is not too large for the log or - * induces too much latency when writing out through the iclogs. We track both - * space consumed and the number of vectors in the checkpoint context, so we - * need to decide which to use for limiting. + * The amount of log space we allow the CIL to aggregate is difficult to size. + * Whatever we choose, we have to make sure we can get a reservation for the + * log space effectively, that it is large enough to capture sufficient + * relogging to reduce log buffer IO significantly, but it is not too large for + * the log or induces too much latency when writing out through the iclogs. We + * track both space consumed and the number of vectors in the checkpoint + * context, so we need to decide which to use for limiting. * * Every log buffer we write out during a push needs a header reserved, which * is at least one sector and more for v2 logs. Hence we need a reservation of @@ -459,16 +459,21 @@ struct xfs_cil { * checkpoint transaction ticket is specific to the checkpoint context, rather * than the CIL itself. * - * With dynamic reservations, we can basically make up arbitrary limits for the - * checkpoint size so long as they don't violate any other size rules. Hence - * the initial maximum size for the checkpoint transaction will be set to a - * quarter of the log or 8MB, which ever is smaller. 8MB is an arbitrary limit - * right now based on the latency of writing out a large amount of data through - * the circular iclog buffers. + * With dynamic reservations, we can effectively make up arbitrary limits for + * the checkpoint size so long as they don't violate any other size rules. + * Recovery imposes a rule that no transaction exceed half the log, so we are + * limited by that. Furthermore, the log transaction reservation subsystem + * tries to keep 25% of the log free, so we need to keep below that limit or we + * risk running out of free log space to start any new transactions. + * + * In order to keep background CIL push efficient, we will set a lower + * threshold at which background pushing is attempted without blocking current + * transaction commits. A separate, higher bound defines when CIL pushes are + * enforced to ensure we stay within our maximum checkpoint size bounds. + * threshold, yet give us plenty of space for aggregation on large logs. */ - -#define XLOG_CIL_SPACE_LIMIT(log) \ - (min((log->l_logsize >> 2), (8 * 1024 * 1024))) +#define XLOG_CIL_SPACE_LIMIT(log) (log->l_logsize >> 3) +#define XLOG_CIL_HARD_SPACE_LIMIT(log) (3 * (log->l_logsize >> 4)) /* * The reservation head lsn is not made up of a cycle number and block number. diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index c0786d446a00..984cdc62e30b 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -55,7 +55,7 @@ extern u8 acpi_gbl_permanent_mmap; /* - * Globals that are publically available, allowing for + * Globals that are publicly available, allowing for * run time configuration */ extern u32 acpi_dbg_level; diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 7809d230adee..4c9461a4f9e6 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -612,7 +612,7 @@ struct drm_gem_object { struct kref refcount; /** Handle count of this object. Each handle also holds a reference */ - struct kref handlecount; + atomic_t handle_count; /* number of handles on this object */ /** Related drm device */ struct drm_device *dev; @@ -808,7 +808,6 @@ struct drm_driver { */ int (*gem_init_object) (struct drm_gem_object *obj); void (*gem_free_object) (struct drm_gem_object *obj); - void (*gem_free_object_unlocked) (struct drm_gem_object *obj); /* vga arb irq handler */ void (*vgaarb_irq)(struct drm_device *dev, bool state); @@ -1175,6 +1174,7 @@ extern int drm_release(struct inode *inode, struct file *filp); extern int drm_mmap(struct file *filp, struct vm_area_struct *vma); extern int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma); extern void drm_vm_open_locked(struct vm_area_struct *vma); +extern void drm_vm_close_locked(struct vm_area_struct *vma); extern resource_size_t drm_core_get_map_ofs(struct drm_local_map * map); extern resource_size_t drm_core_get_reg_ofs(struct drm_device *dev); extern unsigned int drm_poll(struct file *filp, struct poll_table_struct *wait); @@ -1455,12 +1455,11 @@ int drm_gem_init(struct drm_device *dev); void drm_gem_destroy(struct drm_device *dev); void drm_gem_object_release(struct drm_gem_object *obj); void drm_gem_object_free(struct kref *kref); -void drm_gem_object_free_unlocked(struct kref *kref); struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev, size_t size); int drm_gem_object_init(struct drm_device *dev, struct drm_gem_object *obj, size_t size); -void drm_gem_object_handle_free(struct kref *kref); +void drm_gem_object_handle_free(struct drm_gem_object *obj); void drm_gem_vm_open(struct vm_area_struct *vma); void drm_gem_vm_close(struct vm_area_struct *vma); int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma); @@ -1483,8 +1482,12 @@ drm_gem_object_unreference(struct drm_gem_object *obj) static inline void drm_gem_object_unreference_unlocked(struct drm_gem_object *obj) { - if (obj != NULL) - kref_put(&obj->refcount, drm_gem_object_free_unlocked); + if (obj != NULL) { + struct drm_device *dev = obj->dev; + mutex_lock(&dev->struct_mutex); + kref_put(&obj->refcount, drm_gem_object_free); + mutex_unlock(&dev->struct_mutex); + } } int drm_gem_handle_create(struct drm_file *file_priv, @@ -1495,7 +1498,7 @@ static inline void drm_gem_object_handle_reference(struct drm_gem_object *obj) { drm_gem_object_reference(obj); - kref_get(&obj->handlecount); + atomic_inc(&obj->handle_count); } static inline void @@ -1504,12 +1507,15 @@ drm_gem_object_handle_unreference(struct drm_gem_object *obj) if (obj == NULL) return; + if (atomic_read(&obj->handle_count) == 0) + return; /* * Must bump handle count first as this may be the last * ref, in which case the object would disappear before we * checked for a name */ - kref_put(&obj->handlecount, drm_gem_object_handle_free); + if (atomic_dec_and_test(&obj->handle_count)) + drm_gem_object_handle_free(obj); drm_gem_object_unreference(obj); } @@ -1519,12 +1525,17 @@ drm_gem_object_handle_unreference_unlocked(struct drm_gem_object *obj) if (obj == NULL) return; + if (atomic_read(&obj->handle_count) == 0) + return; + /* * Must bump handle count first as this may be the last * ref, in which case the object would disappear before we * checked for a name */ - kref_put(&obj->handlecount, drm_gem_object_handle_free); + + if (atomic_dec_and_test(&obj->handle_count)) + drm_gem_object_handle_free(obj); drm_gem_object_unreference_unlocked(obj); } diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 3a9940ef728b..883c1d439899 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -85,7 +85,6 @@ {0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \ {0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \ {0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \ - {0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5548, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5549, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ {0x1002, 0x554A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ @@ -103,6 +102,7 @@ {0x1002, 0x564F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \ {0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \ {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index b0c174012436..c6454cca0447 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -20,6 +20,7 @@ #include <linux/resource.h> #define AMBA_NR_IRQS 2 +#define AMBA_CID 0xb105f00d struct clk; @@ -70,9 +71,15 @@ void amba_release_regions(struct amba_device *); #define amba_pclk_disable(d) \ do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) -#define amba_config(d) (((d)->periphid >> 24) & 0xff) -#define amba_rev(d) (((d)->periphid >> 20) & 0x0f) -#define amba_manf(d) (((d)->periphid >> 12) & 0xff) -#define amba_part(d) ((d)->periphid & 0xfff) +/* Some drivers don't use the struct amba_device */ +#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) +#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) +#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff) +#define AMBA_PART_BITS(a) ((a) & 0xfff) + +#define amba_config(d) AMBA_CONFIG_BITS((d)->periphid) +#define amba_rev(d) AMBA_REV_BITS((d)->periphid) +#define amba_manf(d) AMBA_MANF_BITS((d)->periphid) +#define amba_part(d) AMBA_PART_BITS((d)->periphid) #endif diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index ca84ce70d5d5..f4ee9acc9721 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -24,6 +24,7 @@ * whether a card is present in the MMC slot or not * @gpio_wp: read this GPIO pin to see if the card is write protected * @gpio_cd: read this GPIO pin to detect card insertion + * @cd_invert: true if the gpio_cd pin value is active low * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h */ @@ -35,6 +36,7 @@ struct mmci_platform_data { unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; + bool cd_invert; unsigned long capabilities; }; diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 36ca9721a0c2..1be416bbbb82 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -53,6 +53,7 @@ struct cpuidle_state { #define CPUIDLE_FLAG_BALANCED (0x40) /* medium latency, moderate savings */ #define CPUIDLE_FLAG_DEEP (0x80) /* high latency, large savings */ #define CPUIDLE_FLAG_IGNORE (0x100) /* ignore during this idle period */ +#define CPUIDLE_FLAG_TLB_FLUSHED (0x200) /* tlb will be flushed */ #define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000) diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h index 7c930dba477c..5dd428532f79 100644 --- a/include/linux/davinci_emac.h +++ b/include/linux/davinci_emac.h @@ -14,16 +14,26 @@ #include <linux/if_ether.h> #include <linux/memory.h> +struct mdio_platform_data { + unsigned long bus_freq; +}; + struct emac_platform_data { char mac_addr[ETH_ALEN]; u32 ctrl_reg_offset; u32 ctrl_mod_reg_offset; u32 ctrl_ram_offset; u32 hw_ram_addr; - u32 mdio_reg_offset; u32 ctrl_ram_size; - u32 phy_mask; - u32 mdio_max_freq; + + /* + * phy_id can be one of the following: + * - NULL : use the first phy on the bus, + * - "" : force to 100/full, no mdio control + * - "<bus>:<addr>" : use the specified bus and phy + */ + const char *phy_id; + u8 rmii_en; u8 version; void (*interrupt_enable) (void); diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c61d4ca27bcc..e2106495cc11 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -548,7 +548,7 @@ static inline bool dma_dev_has_pq_continue(struct dma_device *dma) return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE; } -static unsigned short dma_dev_to_maxpq(struct dma_device *dma) +static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma) { return dma->max_pq & ~DMA_HAS_PQ_CONTINUE; } diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h index e47f770d3068..eff3094ca84e 100644 --- a/include/linux/mfd/tc35892.h +++ b/include/linux/mfd/tc35892.h @@ -111,9 +111,13 @@ extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val); * struct tc35892_gpio_platform_data - TC35892 GPIO platform data * @gpio_base: first gpio number assigned to TC35892. A maximum of * %TC35892_NR_GPIOS GPIOs will be allocated. + * @setup: callback for board-specific initialization + * @remove: callback for board-specific teardown */ struct tc35892_gpio_platform_data { int gpio_base; + void (*setup)(struct tc35892 *tc35892, unsigned gpio_base); + void (*remove)(struct tc35892 *tc35892, unsigned gpio_base); }; /** diff --git a/include/linux/module.h b/include/linux/module.h index 8a6b9fdc7ffa..aace066bad8f 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -686,17 +686,16 @@ extern int module_sysfs_initialized; #ifdef CONFIG_GENERIC_BUG -int module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *, +void module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *, struct module *); void module_bug_cleanup(struct module *); #else /* !CONFIG_GENERIC_BUG */ -static inline int module_bug_finalize(const Elf_Ehdr *hdr, +static inline void module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod) { - return 0; } static inline void module_bug_cleanup(struct module *mod) {} #endif /* CONFIG_GENERIC_BUG */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 9fbc54a2585d..83af1f8d8b74 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -454,7 +454,7 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) * Makes rcu_dereference_check() do the dirty work. */ #define rcu_dereference_bh(p) \ - rcu_dereference_check(p, rcu_read_lock_bh_held()) + rcu_dereference_check(p, rcu_read_lock_bh_held() || irqs_disabled()) /** * rcu_dereference_sched - fetch RCU-protected pointer, checking for RCU-sched diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 563e23400913..295e89817de8 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -196,6 +196,9 @@ /* High Speed UART for Medfield */ #define PORT_MFD 95 +/* TI OMAP-UART */ +#define PORT_OMAP 96 + #ifdef __KERNEL__ #include <linux/compiler.h> diff --git a/include/linux/wait.h b/include/linux/wait.h index 0836ccc57121..3efc9f3f43a0 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -614,6 +614,7 @@ int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key); (wait)->private = current; \ (wait)->func = autoremove_wake_function; \ INIT_LIST_HEAD(&(wait)->task_list); \ + (wait)->flags = 0; \ } while (0) /** diff --git a/ipc/sem.c b/ipc/sem.c index 40a8f462a822..0e0d49bbb867 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -743,6 +743,8 @@ static unsigned long copy_semid_to_user(void __user *buf, struct semid64_ds *in, { struct semid_ds out; + memset(&out, 0, sizeof(out)); + ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm); out.sem_otime = in->sem_otime; diff --git a/kernel/kfifo.c b/kernel/kfifo.c index 6b5580c57644..01a0700e873f 100644 --- a/kernel/kfifo.c +++ b/kernel/kfifo.c @@ -365,8 +365,6 @@ static unsigned int setup_sgl(struct __kfifo *fifo, struct scatterlist *sgl, n = setup_sgl_buf(sgl, fifo->data + off, nents, l); n += setup_sgl_buf(sgl + n, fifo->data, nents - n, len - l); - if (n) - sg_mark_end(sgl + n - 1); return n; } diff --git a/kernel/module.c b/kernel/module.c index d0b5f8db11b4..ccd641991842 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1537,6 +1537,7 @@ static int __unlink_module(void *_mod) { struct module *mod = _mod; list_del(&mod->list); + module_bug_cleanup(mod); return 0; } @@ -2625,6 +2626,7 @@ static struct module *load_module(void __user *umod, if (err < 0) goto ddebug; + module_bug_finalize(info.hdr, info.sechdrs, mod); list_add_rcu(&mod->list, &modules); mutex_unlock(&module_mutex); @@ -2650,6 +2652,8 @@ static struct module *load_module(void __user *umod, mutex_lock(&module_mutex); /* Unlink carefully: kallsyms could be walking list. */ list_del_rcu(&mod->list); + module_bug_cleanup(mod); + ddebug: if (!mod->taints) dynamic_debug_remove(info.debug); diff --git a/kernel/smp.c b/kernel/smp.c index 75c970c715d3..ed6aacfcb7ef 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -365,9 +365,10 @@ call: EXPORT_SYMBOL_GPL(smp_call_function_any); /** - * __smp_call_function_single(): Run a function on another CPU + * __smp_call_function_single(): Run a function on a specific CPU * @cpu: The CPU to run on. * @data: Pre-allocated and setup data structure + * @wait: If true, wait until function has completed on specified CPU. * * Like smp_call_function_single(), but allow caller to pass in a * pre-allocated data structure. Useful for embedding @data inside @@ -376,8 +377,10 @@ EXPORT_SYMBOL_GPL(smp_call_function_any); void __smp_call_function_single(int cpu, struct call_single_data *data, int wait) { - csd_lock(data); + unsigned int this_cpu; + unsigned long flags; + this_cpu = get_cpu(); /* * Can deadlock when called with interrupts disabled. * We allow cpu's that are not yet online though, as no one else can @@ -387,7 +390,15 @@ void __smp_call_function_single(int cpu, struct call_single_data *data, WARN_ON_ONCE(cpu_online(smp_processor_id()) && wait && irqs_disabled() && !oops_in_progress); - generic_exec_single(cpu, data, wait); + if (cpu == this_cpu) { + local_irq_save(flags); + data->func(data->info); + local_irq_restore(flags); + } else { + csd_lock(data); + generic_exec_single(cpu, data, wait); + } + put_cpu(); } /** diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 538501c6ea50..6329d063b5e4 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -121,7 +121,7 @@ if FTRACE config FUNCTION_TRACER bool "Kernel Function Tracer" depends on HAVE_FUNCTION_TRACER - select FRAME_POINTER + select FRAME_POINTER if (!ARM_UNWIND) select KALLSYMS select GENERIC_TRACER select CONTEXT_SWITCH_TRACER diff --git a/lib/bug.c b/lib/bug.c index 7cdfad88128f..19552096d16b 100644 --- a/lib/bug.c +++ b/lib/bug.c @@ -72,8 +72,8 @@ static const struct bug_entry *module_find_bug(unsigned long bugaddr) return NULL; } -int module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, - struct module *mod) +void module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, + struct module *mod) { char *secstrings; unsigned int i; @@ -97,8 +97,6 @@ int module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, * could potentially lead to deadlock and thus be counter-productive. */ list_add(&mod->bug_list, &module_bug_list); - - return 0; } void module_bug_cleanup(struct module *mod) diff --git a/lib/list_sort.c b/lib/list_sort.c index 4b5cb794c38b..a7616fa3162e 100644 --- a/lib/list_sort.c +++ b/lib/list_sort.c @@ -70,7 +70,7 @@ static void merge_and_restore_back_links(void *priv, * element comparison is needed, so the client's cmp() * routine can invoke cond_resched() periodically. */ - (*cmp)(priv, tail, tail); + (*cmp)(priv, tail->next, tail->next); tail->next->prev = tail; tail = tail->next; @@ -712,7 +712,7 @@ static int write_protect_page(struct vm_area_struct *vma, struct page *page, if (!ptep) goto out; - if (pte_write(*ptep)) { + if (pte_write(*ptep) || pte_dirty(*ptep)) { pte_t entry; swapped = PageSwapCache(page); @@ -735,7 +735,9 @@ static int write_protect_page(struct vm_area_struct *vma, struct page *page, set_pte_at(mm, addr, ptep, entry); goto out_unlock; } - entry = pte_wrprotect(entry); + if (pte_dirty(entry)) + set_page_dirty(page); + entry = pte_mkclean(pte_wrprotect(entry)); set_pte_at_notify(mm, addr, ptep, entry); } *orig_pte = *ptep; diff --git a/mm/rmap.c b/mm/rmap.c index 9d2ba01bd4f9..92e6757f196e 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -381,7 +381,13 @@ vma_address(struct page *page, struct vm_area_struct *vma) unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma) { if (PageAnon(page)) { - if (vma->anon_vma->root != page_anon_vma(page)->root) + struct anon_vma *page__anon_vma = page_anon_vma(page); + /* + * Note: swapoff's unuse_vma() is more efficient with this + * check, and needs it to match anon_vma when KSM is active. + */ + if (!vma->anon_vma || !page__anon_vma || + vma->anon_vma->root != page__anon_vma->root) return -EFAULT; } else if (page->mapping && !(vma->vm_flags & VM_NONLINEAR)) { if (!vma->vm_file || diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 01ddb0472f86..0eb96f7e44be 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -24,8 +24,11 @@ int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, if (vlan_dev) skb->dev = vlan_dev; - else if (vlan_id) - goto drop; + else if (vlan_id) { + if (!(skb->dev->flags & IFF_PROMISC)) + goto drop; + skb->pkt_type = PACKET_OTHERHOST; + } return (polling ? netif_receive_skb(skb) : netif_rx(skb)); @@ -102,8 +105,11 @@ vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp, if (vlan_dev) skb->dev = vlan_dev; - else if (vlan_id) - goto drop; + else if (vlan_id) { + if (!(skb->dev->flags & IFF_PROMISC)) + goto drop; + skb->pkt_type = PACKET_OTHERHOST; + } for (p = napi->gro_list; p; p = p->next) { NAPI_GRO_CB(p)->same_flow = diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c index 8ce904786116..4bf28f25f368 100644 --- a/net/caif/caif_socket.c +++ b/net/caif/caif_socket.c @@ -827,6 +827,7 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr, long timeo; int err; int ifindex, headroom, tailroom; + unsigned int mtu; struct net_device *dev; lock_sock(sk); @@ -896,15 +897,23 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr, cf_sk->sk.sk_state = CAIF_DISCONNECTED; goto out; } - dev = dev_get_by_index(sock_net(sk), ifindex); + + err = -ENODEV; + rcu_read_lock(); + dev = dev_get_by_index_rcu(sock_net(sk), ifindex); + if (!dev) { + rcu_read_unlock(); + goto out; + } cf_sk->headroom = LL_RESERVED_SPACE_EXTRA(dev, headroom); + mtu = dev->mtu; + rcu_read_unlock(); + cf_sk->tailroom = tailroom; - cf_sk->maxframe = dev->mtu - (headroom + tailroom); - dev_put(dev); + cf_sk->maxframe = mtu - (headroom + tailroom); if (cf_sk->maxframe < 1) { - pr_warning("CAIF: %s(): CAIF Interface MTU too small (%d)\n", - __func__, dev->mtu); - err = -ENODEV; + pr_warning("CAIF: %s(): CAIF Interface MTU too small (%u)\n", + __func__, mtu); goto out; } diff --git a/net/core/stream.c b/net/core/stream.c index d959e0f41528..f5df85dcd20b 100644 --- a/net/core/stream.c +++ b/net/core/stream.c @@ -141,10 +141,10 @@ int sk_stream_wait_memory(struct sock *sk, long *timeo_p) set_bit(SOCK_NOSPACE, &sk->sk_socket->flags); sk->sk_write_pending++; - sk_wait_event(sk, ¤t_timeo, !sk->sk_err && - !(sk->sk_shutdown & SEND_SHUTDOWN) && - sk_stream_memory_free(sk) && - vm_wait); + sk_wait_event(sk, ¤t_timeo, sk->sk_err || + (sk->sk_shutdown & SEND_SHUTDOWN) || + (sk_stream_memory_free(sk) && + !vm_wait)); sk->sk_write_pending--; if (vm_wait) { diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 571f8950ed06..7cd7760144f7 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -217,6 +217,7 @@ config NET_IPIP config NET_IPGRE tristate "IP: GRE tunnels over IP" + depends on IPV6 || IPV6=n help Tunneling means encapsulating data of one protocol type within another protocol and sending it over a channel that understands the @@ -412,7 +413,7 @@ config INET_XFRM_MODE_BEET If unsure, say Y. config INET_LRO - bool "Large Receive Offload (ipv4/tcp)" + tristate "Large Receive Offload (ipv4/tcp)" default y ---help--- Support for Large Receive Offload (ipv4/tcp). diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 1fdcacd36ce7..2a4bb76f2132 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -834,7 +834,7 @@ static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb, int mark = 0; - if (len == 8 || IGMP_V2_SEEN(in_dev)) { + if (len == 8) { if (ih->code == 0) { /* Alas, old v1 router presents here. */ @@ -856,6 +856,18 @@ static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb, igmpv3_clear_delrec(in_dev); } else if (len < 12) { return; /* ignore bogus packet; freed by caller */ + } else if (IGMP_V1_SEEN(in_dev)) { + /* This is a v3 query with v1 queriers present */ + max_delay = IGMP_Query_Response_Interval; + group = 0; + } else if (IGMP_V2_SEEN(in_dev)) { + /* this is a v3 query with v2 queriers present; + * Interpretation of the max_delay code is problematic here. + * A real v2 host would use ih_code directly, while v3 has a + * different encoding. We use the v3 encoding as more likely + * to be intended in a v3 query. + */ + max_delay = IGMPV3_MRC(ih3->code)*(HZ/IGMP_TIMER_SCALE); } else { /* v3 */ if (!pskb_may_pull(skb, sizeof(struct igmpv3_query))) return; diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index c35b469e851c..74c54b30600f 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -135,13 +135,16 @@ static void tcp_mtu_probing(struct inet_connection_sock *icsk, struct sock *sk) /* This function calculates a "timeout" which is equivalent to the timeout of a * TCP connection after "boundary" unsuccessful, exponentially backed-off - * retransmissions with an initial RTO of TCP_RTO_MIN. + * retransmissions with an initial RTO of TCP_RTO_MIN or TCP_TIMEOUT_INIT if + * syn_set flag is set. */ static bool retransmits_timed_out(struct sock *sk, - unsigned int boundary) + unsigned int boundary, + bool syn_set) { unsigned int timeout, linear_backoff_thresh; unsigned int start_ts; + unsigned int rto_base = syn_set ? TCP_TIMEOUT_INIT : TCP_RTO_MIN; if (!inet_csk(sk)->icsk_retransmits) return false; @@ -151,12 +154,12 @@ static bool retransmits_timed_out(struct sock *sk, else start_ts = tcp_sk(sk)->retrans_stamp; - linear_backoff_thresh = ilog2(TCP_RTO_MAX/TCP_RTO_MIN); + linear_backoff_thresh = ilog2(TCP_RTO_MAX/rto_base); if (boundary <= linear_backoff_thresh) - timeout = ((2 << boundary) - 1) * TCP_RTO_MIN; + timeout = ((2 << boundary) - 1) * rto_base; else - timeout = ((2 << linear_backoff_thresh) - 1) * TCP_RTO_MIN + + timeout = ((2 << linear_backoff_thresh) - 1) * rto_base + (boundary - linear_backoff_thresh) * TCP_RTO_MAX; return (tcp_time_stamp - start_ts) >= timeout; @@ -167,14 +170,15 @@ static int tcp_write_timeout(struct sock *sk) { struct inet_connection_sock *icsk = inet_csk(sk); int retry_until; - bool do_reset; + bool do_reset, syn_set = 0; if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV)) { if (icsk->icsk_retransmits) dst_negative_advice(sk); retry_until = icsk->icsk_syn_retries ? : sysctl_tcp_syn_retries; + syn_set = 1; } else { - if (retransmits_timed_out(sk, sysctl_tcp_retries1)) { + if (retransmits_timed_out(sk, sysctl_tcp_retries1, 0)) { /* Black hole detection */ tcp_mtu_probing(icsk, sk); @@ -187,14 +191,14 @@ static int tcp_write_timeout(struct sock *sk) retry_until = tcp_orphan_retries(sk, alive); do_reset = alive || - !retransmits_timed_out(sk, retry_until); + !retransmits_timed_out(sk, retry_until, 0); if (tcp_out_of_resources(sk, do_reset)) return 1; } } - if (retransmits_timed_out(sk, retry_until)) { + if (retransmits_timed_out(sk, retry_until, syn_set)) { /* Has it gone just too far? */ tcp_write_err(sk); return 1; @@ -436,7 +440,7 @@ out_reset_timer: icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX); } inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, icsk->icsk_rto, TCP_RTO_MAX); - if (retransmits_timed_out(sk, sysctl_tcp_retries1 + 1)) + if (retransmits_timed_out(sk, sysctl_tcp_retries1 + 1, 0)) __sk_dst_reset(sk); out:; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 8323136bdc54..a275c6e1e25c 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1556,14 +1556,13 @@ out: * i.e. Path MTU discovery */ -void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr, - struct net_device *dev, u32 pmtu) +static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr, + struct net *net, u32 pmtu, int ifindex) { struct rt6_info *rt, *nrt; - struct net *net = dev_net(dev); int allfrag = 0; - rt = rt6_lookup(net, daddr, saddr, dev->ifindex, 0); + rt = rt6_lookup(net, daddr, saddr, ifindex, 0); if (rt == NULL) return; @@ -1631,6 +1630,27 @@ out: dst_release(&rt->dst); } +void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr, + struct net_device *dev, u32 pmtu) +{ + struct net *net = dev_net(dev); + + /* + * RFC 1981 states that a node "MUST reduce the size of the packets it + * is sending along the path" that caused the Packet Too Big message. + * Since it's not possible in the general case to determine which + * interface was used to send the original packet, we update the MTU + * on the interface that will be used to send future packets. We also + * update the MTU on the interface that received the Packet Too Big in + * case the original packet was forced out that interface with + * SO_BINDTODEVICE or similar. This is the next best thing to the + * correct behaviour, which would be to update the MTU on all + * interfaces. + */ + rt6_do_pmtu_disc(daddr, saddr, net, pmtu, 0); + rt6_do_pmtu_disc(daddr, saddr, net, pmtu, dev->ifindex); +} + /* * Misc support functions */ diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index c893f236acea..8f23401832b7 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -175,6 +175,8 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); + del_timer_sync(&tid_tx->addba_resp_timer); + /* * After this packets are no longer handed right through * to the driver but are put onto tid_tx->pending instead, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index fa0f37e4afe4..28624282c5f3 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2199,9 +2199,6 @@ static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx, struct net_device *prev_dev = NULL; struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); - if (status->flag & RX_FLAG_INTERNAL_CMTR) - goto out_free_skb; - if (skb_headroom(skb) < sizeof(*rthdr) && pskb_expand_head(skb, sizeof(*rthdr), 0, GFP_ATOMIC)) goto out_free_skb; @@ -2260,7 +2257,6 @@ static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx, } else goto out_free_skb; - status->flag |= RX_FLAG_INTERNAL_CMTR; return; out_free_skb: diff --git a/net/phonet/pep.c b/net/phonet/pep.c index b2a3ae6cad78..15003021f4f0 100644 --- a/net/phonet/pep.c +++ b/net/phonet/pep.c @@ -225,12 +225,13 @@ static void pipe_grant_credits(struct sock *sk) static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb) { struct pep_sock *pn = pep_sk(sk); - struct pnpipehdr *hdr = pnp_hdr(skb); + struct pnpipehdr *hdr; int wake = 0; if (!pskb_may_pull(skb, sizeof(*hdr) + 4)) return -EINVAL; + hdr = pnp_hdr(skb); if (hdr->data[0] != PN_PEP_TYPE_COMMON) { LIMIT_NETDEBUG(KERN_DEBUG"Phonet unknown PEP type: %u\n", (unsigned)hdr->data[0]); diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c index 7416a5c73b2a..b0c2a82178af 100644 --- a/net/sched/cls_u32.c +++ b/net/sched/cls_u32.c @@ -137,7 +137,7 @@ next_knode: int toff = off + key->off + (off2 & key->offmask); __be32 *data, _data; - if (skb_headroom(skb) + toff < 0) + if (skb_headroom(skb) + toff > INT_MAX) goto out; data = skb_header_pointer(skb, toff, 4, &_data); diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 86366390038a..ddbbf7c81fa1 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -543,16 +543,20 @@ struct sctp_hmac *sctp_auth_asoc_get_hmac(const struct sctp_association *asoc) id = ntohs(hmacs->hmac_ids[i]); /* Check the id is in the supported range */ - if (id > SCTP_AUTH_HMAC_ID_MAX) + if (id > SCTP_AUTH_HMAC_ID_MAX) { + id = 0; continue; + } /* See is we support the id. Supported IDs have name and * length fields set, so that we can allocated and use * them. We can safely just check for name, for without the * name, we can't allocate the TFM. */ - if (!sctp_hmac_list[id].hmac_name) + if (!sctp_hmac_list[id].hmac_name) { + id = 0; continue; + } break; } diff --git a/net/sctp/socket.c b/net/sctp/socket.c index ca44917872d2..fbb70770ad05 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -916,6 +916,11 @@ SCTP_STATIC int sctp_setsockopt_bindx(struct sock* sk, /* Walk through the addrs buffer and count the number of addresses. */ addr_buf = kaddrs; while (walk_size < addrs_size) { + if (walk_size + sizeof(sa_family_t) > addrs_size) { + kfree(kaddrs); + return -EINVAL; + } + sa_addr = (struct sockaddr *)addr_buf; af = sctp_get_af_specific(sa_addr->sa_family); @@ -1002,9 +1007,13 @@ static int __sctp_connect(struct sock* sk, /* Walk through the addrs buffer and count the number of addresses. */ addr_buf = kaddrs; while (walk_size < addrs_size) { + if (walk_size + sizeof(sa_family_t) > addrs_size) { + err = -EINVAL; + goto out_free; + } + sa_addr = (union sctp_addr *)addr_buf; af = sctp_get_af_specific(sa_addr->sa.sa_family); - port = ntohs(sa_addr->v4.sin_port); /* If the address family is not supported or if this address * causes the address buffer to overflow return EINVAL. @@ -1014,6 +1023,8 @@ static int __sctp_connect(struct sock* sk, goto out_free; } + port = ntohs(sa_addr->v4.sin_port); + /* Save current address so we can work with it */ memcpy(&to, sa_addr, af->sockaddr_len); diff --git a/samples/kfifo/dma-example.c b/samples/kfifo/dma-example.c index ee03a4f0b64f..06473791c08a 100644 --- a/samples/kfifo/dma-example.c +++ b/samples/kfifo/dma-example.c @@ -24,6 +24,7 @@ static int __init example_init(void) { int i; unsigned int ret; + unsigned int nents; struct scatterlist sg[10]; printk(KERN_INFO "DMA fifo test start\n"); @@ -61,9 +62,9 @@ static int __init example_init(void) * byte at the beginning, after the kfifo_skip(). */ sg_init_table(sg, ARRAY_SIZE(sg)); - ret = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE); - printk(KERN_INFO "DMA sgl entries: %d\n", ret); - if (!ret) { + nents = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE); + printk(KERN_INFO "DMA sgl entries: %d\n", nents); + if (!nents) { /* fifo is full and no sgl was created */ printk(KERN_WARNING "error kfifo_dma_in_prepare\n"); return -EIO; @@ -71,7 +72,7 @@ static int __init example_init(void) /* receive data */ printk(KERN_INFO "scatterlist for receive:\n"); - for (i = 0; i < ARRAY_SIZE(sg); i++) { + for (i = 0; i < nents; i++) { printk(KERN_INFO "sg[%d] -> " "page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n", @@ -91,16 +92,16 @@ static int __init example_init(void) kfifo_dma_in_finish(&fifo, ret); /* Prepare to transmit data, example: 8 bytes */ - ret = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8); - printk(KERN_INFO "DMA sgl entries: %d\n", ret); - if (!ret) { + nents = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8); + printk(KERN_INFO "DMA sgl entries: %d\n", nents); + if (!nents) { /* no data was available and no sgl was created */ printk(KERN_WARNING "error kfifo_dma_out_prepare\n"); return -EIO; } printk(KERN_INFO "scatterlist for transmit:\n"); - for (i = 0; i < ARRAY_SIZE(sg); i++) { + for (i = 0; i < nents; i++) { printk(KERN_INFO "sg[%d] -> " "page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n", diff --git a/scripts/Makefile.build b/scripts/Makefile.build index a1a5cf95a68d..108eeb99351d 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -212,7 +212,8 @@ ifdef CONFIG_FTRACE_MCOUNT_RECORD cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ "$(if $(CONFIG_64BIT),64,32)" \ - "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ + "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \ + "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ "$(if $(part-of-module),1,0)" "$(@)"; endif diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 6ee2e4fb1481..170459c224a1 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -165,7 +165,6 @@ struct menu { struct symbol *sym; struct property *prompt; struct expr *dep; - struct expr *dir_dep; unsigned int flags; char *help; struct file *file; diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 4fb590247f33..edda8b49619d 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -107,7 +107,6 @@ static struct expr *menu_check_dep(struct expr *e) void menu_add_dep(struct expr *dep) { current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep)); - current_entry->dir_dep = current_entry->dep; } void menu_set_type(int type) @@ -291,10 +290,6 @@ void menu_finalize(struct menu *parent) for (menu = parent->list; menu; menu = menu->next) menu_finalize(menu); } else if (sym) { - /* ignore inherited dependencies for dir_dep */ - sym->dir_dep.expr = expr_transform(expr_copy(parent->dir_dep)); - sym->dir_dep.expr = expr_eliminate_dups(sym->dir_dep.expr); - basedep = parent->prompt ? parent->prompt->visible.expr : NULL; basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no); basedep = expr_eliminate_dups(expr_transform(basedep)); @@ -325,6 +320,8 @@ void menu_finalize(struct menu *parent) parent->next = last_menu->next; last_menu->next = NULL; } + + sym->dir_dep.expr = parent->dep; } for (menu = parent->list; menu; menu = menu->next) { if (sym && sym_is_choice(sym) && diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index e67f05486087..1d7963f4ee79 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -270,6 +270,8 @@ if ($arch eq "x86_64") { } elsif ($arch eq "arm") { $alignment = 2; $section_type = '%progbits'; + $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_ARM_(CALL|PC24|THM_CALL)" . + "\\s+(__gnu_mcount_nc|mcount)\$"; } elsif ($arch eq "ia64") { $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$"; diff --git a/sound/core/control.c b/sound/core/control.c index 070aab490191..45a818002d99 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -31,6 +31,7 @@ /* max number of user-defined controls */ #define MAX_USER_CONTROLS 32 +#define MAX_CONTROL_COUNT 1028 struct snd_kctl_ioctl { struct list_head list; /* list of all ioctls */ @@ -195,6 +196,10 @@ static struct snd_kcontrol *snd_ctl_new(struct snd_kcontrol *control, if (snd_BUG_ON(!control || !control->count)) return NULL; + + if (control->count > MAX_CONTROL_COUNT) + return NULL; + kctl = kzalloc(sizeof(*kctl) + sizeof(struct snd_kcontrol_volatile) * control->count, GFP_KERNEL); if (kctl == NULL) { snd_printk(KERN_ERR "Cannot allocate control instance\n"); diff --git a/sound/i2c/other/ak4xxx-adda.c b/sound/i2c/other/ak4xxx-adda.c index 1adb8a3c2b62..42d7844ecd0b 100644 --- a/sound/i2c/other/ak4xxx-adda.c +++ b/sound/i2c/other/ak4xxx-adda.c @@ -900,7 +900,7 @@ static int proc_init(struct snd_akm4xxx *ak) return 0; } #else /* !CONFIG_PROC_FS */ -static int proc_init(struct snd_akm4xxx *ak) {} +static int proc_init(struct snd_akm4xxx *ak) { return 0; } #endif int snd_akm4xxx_build_controls(struct snd_akm4xxx *ak) diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 86f213905e2c..b59ad11466a9 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -31,7 +31,6 @@ #include <sound/initval.h> #include <sound/soc.h> -#include <plat/control.h> #include <plat/dma.h> #include <plat/mcbsp.h> #include "omap-mcbsp.h" @@ -608,93 +607,6 @@ static int omap_mcbsp_dai_set_clkdiv(struct snd_soc_dai *cpu_dai, return 0; } -static int omap_mcbsp_dai_set_clks_src(struct omap_mcbsp_data *mcbsp_data, - int clk_id) -{ - int sel_bit; - u16 reg, reg_devconf1 = OMAP243X_CONTROL_DEVCONF1; - - if (cpu_class_is_omap1()) { - /* OMAP1's can use only external source clock */ - if (unlikely(clk_id == OMAP_MCBSP_SYSCLK_CLKS_FCLK)) - return -EINVAL; - else - return 0; - } - - if (cpu_is_omap2420() && mcbsp_data->bus_id > 1) - return -EINVAL; - - if (cpu_is_omap343x()) - reg_devconf1 = OMAP343X_CONTROL_DEVCONF1; - - switch (mcbsp_data->bus_id) { - case 0: - reg = OMAP2_CONTROL_DEVCONF0; - sel_bit = 2; - break; - case 1: - reg = OMAP2_CONTROL_DEVCONF0; - sel_bit = 6; - break; - case 2: - reg = reg_devconf1; - sel_bit = 0; - break; - case 3: - reg = reg_devconf1; - sel_bit = 2; - break; - case 4: - reg = reg_devconf1; - sel_bit = 4; - break; - default: - return -EINVAL; - } - - if (clk_id == OMAP_MCBSP_SYSCLK_CLKS_FCLK) - omap_ctrl_writel(omap_ctrl_readl(reg) & ~(1 << sel_bit), reg); - else - omap_ctrl_writel(omap_ctrl_readl(reg) | (1 << sel_bit), reg); - - return 0; -} - -static int omap_mcbsp_dai_set_rcvr_src(struct omap_mcbsp_data *mcbsp_data, - int clk_id) -{ - int sel_bit, set = 0; - u16 reg = OMAP2_CONTROL_DEVCONF0; - - if (cpu_class_is_omap1()) - return -EINVAL; /* TODO: Can this be implemented for OMAP1? */ - if (mcbsp_data->bus_id != 0) - return -EINVAL; - - switch (clk_id) { - case OMAP_MCBSP_CLKR_SRC_CLKX: - set = 1; - case OMAP_MCBSP_CLKR_SRC_CLKR: - sel_bit = 3; - break; - case OMAP_MCBSP_FSR_SRC_FSX: - set = 1; - case OMAP_MCBSP_FSR_SRC_FSR: - sel_bit = 4; - break; - default: - return -EINVAL; - } - - if (set) - omap_ctrl_writel(omap_ctrl_readl(reg) | (1 << sel_bit), reg); - else - omap_ctrl_writel(omap_ctrl_readl(reg) & ~(1 << sel_bit), reg); - - return 0; -} - static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int dir) @@ -703,6 +615,14 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs; int err = 0; + /* The McBSP signal muxing functions are only available on McBSP1 */ + if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR || + clk_id == OMAP_MCBSP_CLKR_SRC_CLKX || + clk_id == OMAP_MCBSP_FSR_SRC_FSR || + clk_id == OMAP_MCBSP_FSR_SRC_FSX) + if (cpu_class_is_omap1() || mcbsp_data->bus_id != 0) + return -EINVAL; + mcbsp_data->in_freq = freq; switch (clk_id) { @@ -710,8 +630,20 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, regs->srgr2 |= CLKSM; break; case OMAP_MCBSP_SYSCLK_CLKS_FCLK: + if (cpu_class_is_omap1()) { + err = -EINVAL; + break; + } + err = omap2_mcbsp_set_clks_src(mcbsp_data->bus_id, + MCBSP_CLKS_PRCM_SRC); + break; case OMAP_MCBSP_SYSCLK_CLKS_EXT: - err = omap_mcbsp_dai_set_clks_src(mcbsp_data, clk_id); + if (cpu_class_is_omap1()) { + err = 0; + break; + } + err = omap2_mcbsp_set_clks_src(mcbsp_data->bus_id, + MCBSP_CLKS_PAD_SRC); break; case OMAP_MCBSP_SYSCLK_CLKX_EXT: @@ -720,11 +652,18 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, regs->pcr0 |= SCLKME; break; + case OMAP_MCBSP_CLKR_SRC_CLKR: + omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKR); + break; case OMAP_MCBSP_CLKR_SRC_CLKX: + omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKX); + break; case OMAP_MCBSP_FSR_SRC_FSR: + omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSR); + break; case OMAP_MCBSP_FSR_SRC_FSX: - err = omap_mcbsp_dai_set_rcvr_src(mcbsp_data, clk_id); + omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSX); break; default: err = -ENODEV; diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 4f1fa77c1feb..1950e19af1cf 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -1017,7 +1017,7 @@ builtin-revert.o wt-status.o: wt-status.h # we compile into subdirectories. if the target directory is not the source directory, they might not exists. So # we depend the various files onto their directories. DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h -$(DIRECTORY_DEPS): $(sort $(dir $(DIRECTORY_DEPS))) +$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS))) # In the second step, we make a rule to actually create these directories $(sort $(dir $(DIRECTORY_DEPS))): $(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null diff --git a/tools/perf/util/trace-event-scripting.c b/tools/perf/util/trace-event-scripting.c index 7ea983acfaea..f7af2fca965d 100644 --- a/tools/perf/util/trace-event-scripting.c +++ b/tools/perf/util/trace-event-scripting.c @@ -97,7 +97,7 @@ void setup_python_scripting(void) register_python_scripting(&python_scripting_unsupported_ops); } #else -struct scripting_ops python_scripting_ops; +extern struct scripting_ops python_scripting_ops; void setup_python_scripting(void) { @@ -158,7 +158,7 @@ void setup_perl_scripting(void) register_perl_scripting(&perl_scripting_unsupported_ops); } #else -struct scripting_ops perl_scripting_ops; +extern struct scripting_ops perl_scripting_ops; void setup_perl_scripting(void) { diff --git a/tools/perf/util/ui/browsers/hists.c b/tools/perf/util/ui/browsers/hists.c index dafdf6775d77..6866aa4c41e0 100644 --- a/tools/perf/util/ui/browsers/hists.c +++ b/tools/perf/util/ui/browsers/hists.c @@ -773,7 +773,7 @@ int hists__browse(struct hists *self, const char *helpline, const char *ev_name) switch (key) { case 'a': - if (browser->selection->map == NULL && + if (browser->selection->map == NULL || browser->selection->map->dso->annotate_warned) continue; goto do_annotate; |