summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/s390/Kconfig129
-rw-r--r--arch/s390/Kconfig.debug6
-rw-r--r--arch/s390/defconfig152
-rw-r--r--arch/s390/kvm/Kconfig7
-rw-r--r--drivers/s390/block/Kconfig24
-rw-r--r--drivers/s390/char/Kconfig69
-rw-r--r--drivers/s390/net/Kconfig51
7 files changed, 218 insertions, 220 deletions
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e0b98e71ff47..3243f7a52c72 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -1,13 +1,8 @@
-config SCHED_MC
- def_bool y
- depends on SMP
-
config MMU
def_bool y
config ZONE_DMA
- def_bool y
- depends on 64BIT
+ def_bool y if 64BIT
config LOCKDEP_SUPPORT
def_bool y
@@ -25,12 +20,10 @@ config RWSEM_XCHGADD_ALGORITHM
def_bool y
config ARCH_HAS_ILOG2_U32
- bool
- default n
+ def_bool n
config ARCH_HAS_ILOG2_U64
- bool
- default n
+ def_bool n
config GENERIC_HWEIGHT
def_bool y
@@ -42,9 +35,7 @@ config GENERIC_CLOCKEVENTS
def_bool y
config GENERIC_BUG
- bool
- depends on BUG
- default y
+ def_bool y if BUG
config GENERIC_BUG_RELATIVE_POINTERS
def_bool y
@@ -59,13 +50,10 @@ config ARCH_DMA_ADDR_T_64BIT
def_bool 64BIT
config GENERIC_LOCKBREAK
- bool
- default y
- depends on SMP && PREEMPT
+ def_bool y if SMP && PREEMPT
config PGSTE
- bool
- default y if KVM
+ def_bool y if KVM
config VIRT_CPU_ACCOUNTING
def_bool y
@@ -129,8 +117,7 @@ config S390
select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
config SCHED_OMIT_FRAME_POINTER
- bool
- default y
+ def_bool y
source "init/Kconfig"
@@ -143,20 +130,21 @@ comment "Processor type and features"
source "kernel/time/Kconfig"
config 64BIT
- bool "64 bit kernel"
+ def_bool y
+ prompt "64 bit kernel"
help
Select this option if you have an IBM z/Architecture machine
and want to use the 64 bit addressing mode.
config 32BIT
- bool
- default y if !64BIT
+ def_bool y if !64BIT
config KTIME_SCALAR
def_bool 32BIT
config SMP
- bool "Symmetric multi-processing support"
+ def_bool y
+ prompt "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -188,10 +176,10 @@ config NR_CPUS
approximately sixteen kilobytes to the kernel image.
config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs"
+ def_bool y
+ prompt "Support for hot-pluggable CPUs"
depends on SMP
select HOTPLUG
- default n
help
Say Y here to be able to turn CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu/cpu#.
@@ -207,14 +195,16 @@ config SCHED_MC
increased overhead in some places.
config SCHED_BOOK
- bool "Book scheduler support"
+ def_bool y
+ prompt "Book scheduler support"
depends on SMP && SCHED_MC
help
Book scheduler support improves the CPU scheduler's decision making
when dealing with machines that have several books.
config MATHEMU
- bool "IEEE FPU emulation"
+ def_bool y
+ prompt "IEEE FPU emulation"
depends on MARCH_G5
help
This option is required for IEEE compliant floating point arithmetic
@@ -222,7 +212,8 @@ config MATHEMU
need this.
config COMPAT
- bool "Kernel support for 31 bit emulation"
+ def_bool y
+ prompt "Kernel support for 31 bit emulation"
depends on 64BIT
select COMPAT_BINFMT_ELF
help
@@ -232,16 +223,14 @@ config COMPAT
executing 31 bit applications. It is safe to say "Y".
config SYSVIPC_COMPAT
- bool
- depends on COMPAT && SYSVIPC
- default y
+ def_bool y if COMPAT && SYSVIPC
config AUDIT_ARCH
- bool
- default y
+ def_bool y
config S390_EXEC_PROTECT
- bool "Data execute protection"
+ def_bool y
+ prompt "Data execute protection"
help
This option allows to enable a buffer overflow protection for user
space programs and it also selects the addressing mode option above.
@@ -301,7 +290,8 @@ config MARCH_Z196
endchoice
config PACK_STACK
- bool "Pack kernel stack"
+ def_bool y
+ prompt "Pack kernel stack"
help
This option enables the compiler option -mkernel-backchain if it
is available. If the option is available the compiler supports
@@ -314,7 +304,8 @@ config PACK_STACK
Say Y if you are unsure.
config SMALL_STACK
- bool "Use 8kb for kernel stack instead of 16kb"
+ def_bool n
+ prompt "Use 8kb for kernel stack instead of 16kb"
depends on PACK_STACK && 64BIT && !LOCKDEP
help
If you say Y here and the compiler supports the -mkernel-backchain
@@ -326,7 +317,8 @@ config SMALL_STACK
Say N if you are unsure.
config CHECK_STACK
- bool "Detect kernel stack overflow"
+ def_bool y
+ prompt "Detect kernel stack overflow"
help
This option enables the compiler option -mstack-guard and
-mstack-size if they are available. If the compiler supports them
@@ -350,7 +342,8 @@ config STACK_GUARD
512 for 64 bit.
config WARN_STACK
- bool "Emit compiler warnings for function with broken stack usage"
+ def_bool n
+ prompt "Emit compiler warnings for function with broken stack usage"
help
This option enables the compiler options -mwarn-framesize and
-mwarn-dynamicstack. If the compiler supports these options it
@@ -385,24 +378,24 @@ config ARCH_SPARSEMEM_DEFAULT
def_bool y
config ARCH_SELECT_MEMORY_MODEL
- def_bool y
+ def_bool y
config ARCH_ENABLE_MEMORY_HOTPLUG
- def_bool y
- depends on SPARSEMEM
+ def_bool y if SPARSEMEM
config ARCH_ENABLE_MEMORY_HOTREMOVE
def_bool y
config ARCH_HIBERNATION_POSSIBLE
- def_bool y if 64BIT
+ def_bool y if 64BIT
source "mm/Kconfig"
comment "I/O subsystem configuration"
config QDIO
- tristate "QDIO support"
+ def_tristate y
+ prompt "QDIO support"
---help---
This driver provides the Queued Direct I/O base support for
IBM System z.
@@ -413,7 +406,8 @@ config QDIO
If unsure, say Y.
config CHSC_SCH
- tristate "Support for CHSC subchannels"
+ def_tristate y
+ prompt "Support for CHSC subchannels"
help
This driver allows usage of CHSC subchannels. A CHSC subchannel
is usually present on LPAR only.
@@ -431,7 +425,8 @@ config CHSC_SCH
comment "Misc"
config IPL
- bool "Builtin IPL record support"
+ def_bool y
+ prompt "Builtin IPL record support"
help
If you want to use the produced kernel to IPL directly from a
device, you have to merge a bootsector specific to the device
@@ -463,7 +458,8 @@ config FORCE_MAX_ZONEORDER
default "9"
config PFAULT
- bool "Pseudo page fault support"
+ def_bool y
+ prompt "Pseudo page fault support"
help
Select this option, if you want to use PFAULT pseudo page fault
handling under VM. If running native or in LPAR, this option
@@ -475,7 +471,8 @@ config PFAULT
this option.
config SHARED_KERNEL
- bool "VM shared kernel support"
+ def_bool y
+ prompt "VM shared kernel support"
help
Select this option, if you want to share the text segment of the
Linux kernel between different VM guests. This reduces memory
@@ -486,7 +483,8 @@ config SHARED_KERNEL
doing and want to exploit this feature.
config CMM
- tristate "Cooperative memory management"
+ def_tristate n
+ prompt "Cooperative memory management"
help
Select this option, if you want to enable the kernel interface
to reduce the memory size of the system. This is accomplished
@@ -498,14 +496,16 @@ config CMM
option.
config CMM_IUCV
- bool "IUCV special message interface to cooperative memory management"
+ def_bool y
+ prompt "IUCV special message interface to cooperative memory management"
depends on CMM && (SMSGIUCV=y || CMM=SMSGIUCV)
help
Select this option to enable the special message interface to
the cooperative memory management.
config APPLDATA_BASE
- bool "Linux - VM Monitor Stream, base infrastructure"
+ def_bool n
+ prompt "Linux - VM Monitor Stream, base infrastructure"
depends on PROC_FS
help
This provides a kernel interface for creating and updating z/VM APPLDATA
@@ -520,7 +520,8 @@ config APPLDATA_BASE
The /proc entries can also be read from, showing the current settings.
config APPLDATA_MEM
- tristate "Monitor memory management statistics"
+ def_tristate m
+ prompt "Monitor memory management statistics"
depends on APPLDATA_BASE && VM_EVENT_COUNTERS
help
This provides memory management related data to the Linux - VM Monitor
@@ -536,7 +537,8 @@ config APPLDATA_MEM
appldata_mem.o.
config APPLDATA_OS
- tristate "Monitor OS statistics"
+ def_tristate m
+ prompt "Monitor OS statistics"
depends on APPLDATA_BASE
help
This provides OS related data to the Linux - VM Monitor Stream, like
@@ -550,7 +552,8 @@ config APPLDATA_OS
appldata_os.o.
config APPLDATA_NET_SUM
- tristate "Monitor overall network statistics"
+ def_tristate m
+ prompt "Monitor overall network statistics"
depends on APPLDATA_BASE && NET
help
This provides network related data to the Linux - VM Monitor Stream,
@@ -567,30 +570,32 @@ config APPLDATA_NET_SUM
source kernel/Kconfig.hz
config S390_HYPFS_FS
- bool "s390 hypervisor file system support"
+ def_bool y
+ prompt "s390 hypervisor file system support"
select SYS_HYPERVISOR
- default y
help
This is a virtual file system intended to provide accounting
information in an s390 hypervisor environment.
config KEXEC
- bool "kexec system call"
+ def_bool n
+ prompt "kexec system call"
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but is independent of hardware/microcode support.
config ZFCPDUMP
- bool "zfcpdump support"
+ def_bool n
+ prompt "zfcpdump support"
select SMP
- default n
help
Select this option if you want to build an zfcpdump enabled kernel.
Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
config S390_GUEST
-bool "s390 guest support for KVM (EXPERIMENTAL)"
+ def_bool y
+ prompt "s390 guest support for KVM (EXPERIMENTAL)"
depends on 64BIT && EXPERIMENTAL
select VIRTIO
select VIRTIO_RING
@@ -602,9 +607,9 @@ bool "s390 guest support for KVM (EXPERIMENTAL)"
the default console.
config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
+ def_bool y
+ prompt "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
- default y
help
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug
index 05221b13ffb1..2b380df95606 100644
--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -1,8 +1,7 @@
menu "Kernel hacking"
config TRACE_IRQFLAGS_SUPPORT
- bool
- default y
+ def_bool y
source "lib/Kconfig.debug"
@@ -19,7 +18,8 @@ config STRICT_DEVMEM
If you are unsure, say Y.
config DEBUG_STRICT_USER_COPY_CHECKS
- bool "Strict user copy size checks"
+ def_bool n
+ prompt "Strict user copy size checks"
---help---
Enabling this option turns a certain set of sanity checks for user
copy operations into compile time warnings.
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index e40ac6ee6526..d79697157ac0 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -2,16 +2,12 @@ CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_AUDIT=y
+CONFIG_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_NS=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_COMPAT_BRK is not set
+CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
@@ -20,24 +16,12 @@ CONFIG_MODVERSIONS=y
CONFIG_DEFAULT_DEADLINE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
-CONFIG_64BIT=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_COMPAT=y
-CONFIG_S390_EXEC_PROTECT=y
-CONFIG_PACK_STACK=y
-CONFIG_CHECK_STACK=y
CONFIG_PREEMPT=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_QDIO=y
-CONFIG_CHSC_SCH=m
-CONFIG_IPL=y
CONFIG_BINFMT_MISC=m
-CONFIG_PFAULT=y
CONFIG_HZ_100=y
CONFIG_KEXEC=y
-CONFIG_S390_GUEST=y
CONFIG_PM=y
CONFIG_HIBERNATION=y
CONFIG_PACKET=y
@@ -46,16 +30,15 @@ CONFIG_NET_KEY=y
CONFIG_AFIUCV=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
+# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
+CONFIG_NET_SCTPPROBE=m
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_VLAN_8021Q=y
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
@@ -69,28 +52,14 @@ CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_NAT=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_XIP=y
-CONFIG_BLK_DEV_XPRAM=m
-CONFIG_DASD=y
-CONFIG_DASD_PROFILE=y
-CONFIG_DASD_ECKD=y
-CONFIG_DASD_FBA=y
-CONFIG_DASD_DIAG=y
-CONFIG_DASD_EER=y
-CONFIG_VIRTIO_BLK=m
+CONFIG_VIRTIO_BLK=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
@@ -102,101 +71,92 @@ CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_ZFCP=y
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-CONFIG_DM_MULTIPATH=m
+CONFIG_ZFCP_DIF=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
-CONFIG_VETH=m
CONFIG_NET_ETHERNET=y
-CONFIG_LCS=m
-CONFIG_CTCM=m
-CONFIG_QETH=y
-CONFIG_QETH_L2=y
-CONFIG_QETH_L3=y
-CONFIG_VIRTIO_NET=m
-CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_VIRTIO_NET=y
CONFIG_RAW_DRIVER=m
-CONFIG_TN3270=y
-CONFIG_TN3270_TTY=y
-CONFIG_TN3270_FS=m
-CONFIG_TN3270_CONSOLE=y
-CONFIG_TN3215=y
-CONFIG_TN3215_CONSOLE=y
-CONFIG_SCLP_TTY=y
-CONFIG_SCLP_CONSOLE=y
-CONFIG_SCLP_VT220_TTY=y
-CONFIG_SCLP_VT220_CONSOLE=y
-CONFIG_SCLP_CPI=m
-CONFIG_SCLP_ASYNC=m
-CONFIG_S390_TAPE=m
-CONFIG_S390_TAPE_BLOCK=y
-CONFIG_S390_TAPE_34XX=m
-CONFIG_ACCESSIBILITY=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_DLM=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
+CONFIG_LOCK_STAT=y
+CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+CONFIG_KPROBES_SANITY_TEST=y
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_SAMPLES=y
-CONFIG_CRYPTO_FIPS=y
+CONFIG_DEBUG_PAGEALLOC=y
+# CONFIG_FTRACE is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_ZCRYPT=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
CONFIG_CRYPTO_SHA512_S390=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC32=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
CONFIG_CRC7=m
-CONFIG_KVM=m
-CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_BALLOON=y
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index a7251580891c..f66a1bdbb61d 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -4,8 +4,8 @@
source "virt/kvm/Kconfig"
menuconfig VIRTUALIZATION
- bool "Virtualization"
- default y
+ def_bool y
+ prompt "Virtualization"
---help---
Say Y here to get to see options for using your Linux host to run other
operating systems inside virtual machines (guests).
@@ -16,7 +16,8 @@ menuconfig VIRTUALIZATION
if VIRTUALIZATION
config KVM
- tristate "Kernel-based Virtual Machine (KVM) support"
+ def_tristate y
+ prompt "Kernel-based Virtual Machine (KVM) support"
depends on HAVE_KVM && EXPERIMENTAL
select PREEMPT_NOTIFIERS
select ANON_INODES
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index 07883197f474..8e477bb1f3f6 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -2,7 +2,8 @@ comment "S/390 block device drivers"
depends on S390 && BLOCK
config BLK_DEV_XPRAM
- tristate "XPRAM disk support"
+ def_tristate m
+ prompt "XPRAM disk support"
depends on S390 && BLOCK
help
Select this option if you want to use your expanded storage on S/390
@@ -12,13 +13,15 @@ config BLK_DEV_XPRAM
xpram. If unsure, say "N".
config DCSSBLK
- tristate "DCSSBLK support"
+ def_tristate m
+ prompt "DCSSBLK support"
depends on S390 && BLOCK
help
Support for dcss block device
config DASD
- tristate "Support for DASD devices"
+ def_tristate y
+ prompt "Support for DASD devices"
depends on CCW && BLOCK
select IOSCHED_DEADLINE
help
@@ -27,28 +30,32 @@ config DASD
natively on a single image or an LPAR.
config DASD_PROFILE
- bool "Profiling support for dasd devices"
+ def_bool y
+ prompt "Profiling support for dasd devices"
depends on DASD
help
Enable this option if you want to see profiling information
in /proc/dasd/statistics.
config DASD_ECKD
- tristate "Support for ECKD Disks"
+ def_tristate y
+ prompt "Support for ECKD Disks"
depends on DASD
help
ECKD devices are the most commonly used devices. You should enable
this option unless you are very sure to have no ECKD device.
config DASD_FBA
- tristate "Support for FBA Disks"
+ def_tristate y
+ prompt "Support for FBA Disks"
depends on DASD
help
Select this option to be able to access FBA devices. It is safe to
say "Y".
config DASD_DIAG
- tristate "Support for DIAG access to Disks"
+ def_tristate y
+ prompt "Support for DIAG access to Disks"
depends on DASD
help
Select this option if you want to use Diagnose250 command to access
@@ -56,7 +63,8 @@ config DASD_DIAG
say "N".
config DASD_EER
- bool "Extended error reporting (EER)"
+ def_bool y
+ prompt "Extended error reporting (EER)"
depends on DASD
help
This driver provides a character device interface to the
diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig
index 40834f18754c..dcee3c5c8954 100644
--- a/drivers/s390/char/Kconfig
+++ b/drivers/s390/char/Kconfig
@@ -2,76 +2,85 @@ comment "S/390 character device drivers"
depends on S390
config TN3270
- tristate "Support for locally attached 3270 terminals"
+ def_tristate y
+ prompt "Support for locally attached 3270 terminals"
depends on CCW
help
Include support for IBM 3270 terminals.
config TN3270_TTY
- tristate "Support for tty input/output on 3270 terminals"
+ def_tristate y
+ prompt "Support for tty input/output on 3270 terminals"
depends on TN3270
help
Include support for using an IBM 3270 terminal as a Linux tty.
config TN3270_FS
- tristate "Support for fullscreen applications on 3270 terminals"
+ def_tristate m
+ prompt "Support for fullscreen applications on 3270 terminals"
depends on TN3270
help
Include support for fullscreen applications on an IBM 3270 terminal.
config TN3270_CONSOLE
- bool "Support for console on 3270 terminal"
+ def_bool y
+ prompt "Support for console on 3270 terminal"
depends on TN3270=y && TN3270_TTY=y
help
Include support for using an IBM 3270 terminal as a Linux system
console. Available only if 3270 support is compiled in statically.
config TN3215
- bool "Support for 3215 line mode terminal"
+ def_bool y
+ prompt "Support for 3215 line mode terminal"
depends on CCW
help
Include support for IBM 3215 line-mode terminals.
config TN3215_CONSOLE
- bool "Support for console on 3215 line mode terminal"
+ def_bool y
+ prompt "Support for console on 3215 line mode terminal"
depends on TN3215
help
Include support for using an IBM 3215 line-mode terminal as a
Linux system console.
config CCW_CONSOLE
- bool
- depends on TN3215_CONSOLE || TN3270_CONSOLE
- default y
+ def_bool y if TN3215_CONSOLE || TN3270_CONSOLE
config SCLP_TTY
- bool "Support for SCLP line mode terminal"
+ def_bool y
+ prompt "Support for SCLP line mode terminal"
depends on S390
help
Include support for IBM SCLP line-mode terminals.
config SCLP_CONSOLE
- bool "Support for console on SCLP line mode terminal"
+ def_bool y
+ prompt "Support for console on SCLP line mode terminal"
depends on SCLP_TTY
help
Include support for using an IBM HWC line-mode terminal as the Linux
system console.
config SCLP_VT220_TTY
- bool "Support for SCLP VT220-compatible terminal"
+ def_bool y
+ prompt "Support for SCLP VT220-compatible terminal"
depends on S390
help
Include support for an IBM SCLP VT220-compatible terminal.
config SCLP_VT220_CONSOLE
- bool "Support for console on SCLP VT220-compatible terminal"
+ def_bool y
+ prompt "Support for console on SCLP VT220-compatible terminal"
depends on SCLP_VT220_TTY
help
Include support for using an IBM SCLP VT220-compatible terminal as a
Linux system console.
config SCLP_CPI
- tristate "Control-Program Identification"
+ def_tristate m
+ prompt "Control-Program Identification"
depends on S390
help
This option enables the hardware console interface for system
@@ -83,7 +92,8 @@ config SCLP_CPI
need this feature and intend to run your kernel in LPAR.
config SCLP_ASYNC
- tristate "Support for Call Home via Asynchronous SCLP Records"
+ def_tristate m
+ prompt "Support for Call Home via Asynchronous SCLP Records"
depends on S390
help
This option enables the call home function, which is able to inform
@@ -93,7 +103,8 @@ config SCLP_ASYNC
need this feature and intend to run your kernel in LPAR.
config S390_TAPE
- tristate "S/390 tape device support"
+ def_tristate m
+ prompt "S/390 tape device support"
depends on CCW
help
Select this option if you want to access channel-attached tape
@@ -109,7 +120,8 @@ comment "S/390 tape interface support"
depends on S390_TAPE
config S390_TAPE_BLOCK
- bool "Support for tape block devices"
+ def_bool y
+ prompt "Support for tape block devices"
depends on S390_TAPE && BLOCK
help
Select this option if you want to access your channel-attached tape
@@ -123,7 +135,8 @@ comment "S/390 tape hardware support"
depends on S390_TAPE
config S390_TAPE_34XX
- tristate "Support for 3480/3490 tape hardware"
+ def_tristate m
+ prompt "Support for 3480/3490 tape hardware"
depends on S390_TAPE
help
Select this option if you want to access IBM 3480/3490 magnetic
@@ -131,7 +144,8 @@ config S390_TAPE_34XX
It is safe to say "Y" here.
config S390_TAPE_3590
- tristate "Support for 3590 tape hardware"
+ def_tristate m
+ prompt "Support for 3590 tape hardware"
depends on S390_TAPE
help
Select this option if you want to access IBM 3590 magnetic
@@ -139,7 +153,8 @@ config S390_TAPE_3590
It is safe to say "Y" here.
config VMLOGRDR
- tristate "Support for the z/VM recording system services (VM only)"
+ def_tristate m
+ prompt "Support for the z/VM recording system services (VM only)"
depends on IUCV
help
Select this option if you want to be able to receive records collected
@@ -148,29 +163,31 @@ config VMLOGRDR
This driver depends on the IUCV support driver.
config VMCP
- bool "Support for the z/VM CP interface"
+ def_bool y
+ prompt "Support for the z/VM CP interface"
depends on S390
help
Select this option if you want to be able to interact with the control
program on z/VM
config MONREADER
- tristate "API for reading z/VM monitor service records"
+ def_tristate m
+ prompt "API for reading z/VM monitor service records"
depends on IUCV
help
Character device driver for reading z/VM monitor service records
config MONWRITER
- tristate "API for writing z/VM monitor service records"
+ def_tristate m
+ prompt "API for writing z/VM monitor service records"
depends on S390
- default "m"
help
Character device driver for writing z/VM monitor service records
config S390_VMUR
- tristate "z/VM unit record device driver"
+ def_tristate m
+ prompt "z/VM unit record device driver"
depends on S390
- default "m"
help
Character device driver for z/VM reader, puncher and printer.
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index 456b18743397..fa80ba1f0344 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -2,7 +2,8 @@ menu "S/390 network device drivers"
depends on NETDEVICES && S390
config LCS
- tristate "Lan Channel Station Interface"
+ def_tristate m
+ prompt "Lan Channel Station Interface"
depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
help
Select this option if you want to use LCS networking on IBM System z.
@@ -12,7 +13,8 @@ config LCS
If you do not know what it is, it's safe to choose Y.
config CTCM
- tristate "CTC and MPC SNA device support"
+ def_tristate m
+ prompt "CTC and MPC SNA device support"
depends on CCW && NETDEVICES
help
Select this option if you want to use channel-to-channel
@@ -26,7 +28,8 @@ config CTCM
If you do not need any channel-to-channel connection, choose N.
config NETIUCV
- tristate "IUCV network device support (VM only)"
+ def_tristate m
+ prompt "IUCV network device support (VM only)"
depends on IUCV && NETDEVICES
help
Select this option if you want to use inter-user communication
@@ -37,14 +40,16 @@ config NETIUCV
The module name is netiucv. If unsure, choose Y.
config SMSGIUCV
- tristate "IUCV special message support (VM only)"
+ def_tristate m
+ prompt "IUCV special message support (VM only)"
depends on IUCV
help
Select this option if you want to be able to receive SMSG messages
from other VM guest systems.
config SMSGIUCV_EVENT
- tristate "Deliver IUCV special messages as uevents (VM only)"
+ def_tristate m
+ prompt "Deliver IUCV special messages as uevents (VM only)"
depends on SMSGIUCV
help
Select this option to deliver CP special messages (SMSGs) as
@@ -54,7 +59,8 @@ config SMSGIUCV_EVENT
To compile as a module, choose M. The module name is "smsgiucv_app".
config CLAW
- tristate "CLAW device support"
+ def_tristate m
+ prompt "CLAW device support"
depends on CCW && NETDEVICES
help
This driver supports channel attached CLAW devices.
@@ -64,7 +70,8 @@ config CLAW
To compile into the kernel, choose Y.
config QETH
- tristate "Gigabit Ethernet device support"
+ def_tristate y
+ prompt "Gigabit Ethernet device support"
depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
help
This driver supports the IBM System z OSA Express adapters
@@ -78,25 +85,25 @@ config QETH
The module name is qeth.
config QETH_L2
- tristate "qeth layer 2 device support"
- depends on QETH
- help
- Select this option to be able to run qeth devices in layer 2 mode.
- To compile as a module, choose M. The module name is qeth_l2.
- If unsure, choose y.
+ def_tristate y
+ prompt "qeth layer 2 device support"
+ depends on QETH
+ help
+ Select this option to be able to run qeth devices in layer 2 mode.
+ To compile as a module, choose M. The module name is qeth_l2.
+ If unsure, choose y.
config QETH_L3
- tristate "qeth layer 3 device support"
- depends on QETH
- help
- Select this option to be able to run qeth devices in layer 3 mode.
- To compile as a module choose M. The module name is qeth_l3.
- If unsure, choose Y.
+ def_tristate y
+ prompt "qeth layer 3 device support"
+ depends on QETH
+ help
+ Select this option to be able to run qeth devices in layer 3 mode.
+ To compile as a module choose M. The module name is qeth_l3.
+ If unsure, choose Y.
config QETH_IPV6
- bool
- depends on (QETH_L3 = IPV6) || (QETH_L3 && IPV6 = 'y')
- default y
+ def_bool y if (QETH_L3 = IPV6) || (QETH_L3 && IPV6 = 'y')
config CCWGROUP
tristate