diff options
50 files changed, 2151 insertions, 146 deletions
diff --git a/Documentation/i2c/busses/i2c-diolan-u2c b/Documentation/i2c/busses/i2c-diolan-u2c new file mode 100644 index 000000000000..30fe4bb9a069 --- /dev/null +++ b/Documentation/i2c/busses/i2c-diolan-u2c @@ -0,0 +1,26 @@ +Kernel driver i2c-diolan-u2c + +Supported adapters: + * Diolan U2C-12 I2C-USB adapter + Documentation: + http://www.diolan.com/i2c/u2c12.html + +Author: Guenter Roeck <guenter.roeck@ericsson.com> + +Description +----------- + +This is the driver for the Diolan U2C-12 USB-I2C adapter. + +The Diolan U2C-12 I2C-USB Adapter provides a low cost solution to connect +a computer to I2C slave devices using a USB interface. It also supports +connectivity to SPI devices. + +This driver only supports the I2C interface of U2C-12. The driver does not use +interrupts. + + +Module parameters +----------------- + +* frequency: I2C bus frequency diff --git a/MAINTAINERS b/MAINTAINERS index 4d5227447a47..565ebb89573e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2112,6 +2112,12 @@ F: Documentation/serial/digiepca.txt F: drivers/char/epca* F: drivers/char/digi* +DIOLAN U2C-12 I2C DRIVER +M: Guenter Roeck <guenter.roeck@ericsson.com> +L: linux-i2c@vger.kernel.org +S: Maintained +F: drivers/i2c/busses/i2c-diolan-u2c.c + DIRECTORY NOTIFICATION (DNOTIFY) M: Eric Paris <eparis@parisplace.org> S: Maintained diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 4aec493640b4..2cbf6df09b82 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -11,8 +11,8 @@ extern void __init mmp2_init_irq(void); extern void mmp2_clear_pmic_int(void); #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> -#include <plat/i2c.h> extern struct pxa_device_desc mmp2_device_uart1; extern struct pxa_device_desc mmp2_device_uart2; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 1801e4206232..a52b3d2f325c 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -8,8 +8,8 @@ extern void __init pxa168_init_irq(void); extern void pxa168_clear_keypad_wakeup(void); #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <video/pxa168fb.h> #include <plat/pxa27x_keypad.h> diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index f13c49d6f8dc..91be75591398 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -7,8 +7,8 @@ extern struct sys_timer pxa910_timer; extern void __init pxa910_init_irq(void); #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> extern struct pxa_device_desc pxa910_device_uart1; diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index e194d928cdaa..d2af73321dae 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -27,6 +27,7 @@ #include <linux/mtd/partitions.h> #include <linux/types.h> #include <linux/i2c/pcf857x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mtd/nand.h> #include <linux/mtd/physmap.h> #include <linux/regulator/max1586.h> @@ -51,8 +52,6 @@ #include <mach/irda.h> #include <mach/ohci.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 7984268508b6..bfca7ed2fea3 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -29,6 +29,7 @@ #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mfd/da903x.h> #include <linux/regulator/machine.h> @@ -48,7 +49,6 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/ohci.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/audio.h> #include <mach/pxa3xx-u2d.h> diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 28f667e52ef9..81c3c433e2d6 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -20,6 +20,7 @@ #include <mach/hardware.h> #include <asm/mach/arch.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/pxa27x.h> #include <mach/colibri.h> @@ -27,8 +28,6 @@ #include <mach/ohci.h> #include <mach/pxa27x-udc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index 07b62a096f17..ee797397dc5b 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/pwm_backlight.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/sysdev.h> #include <asm/irq.h> @@ -33,8 +34,6 @@ #include <mach/pxa27x-udc.h> #include <mach/pxafb.h> -#include <plat/i2c.h> - #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index a5452a3a276d..d4e705caefea 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/backlight.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/io.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -45,7 +46,6 @@ #include <asm/mach/irq.h> #include <mach/pxa25x.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index a305424a967d..0481c29a70e8 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -17,12 +17,12 @@ #include <linux/mtd/partitions.h> #include <linux/sm501.h> #include <linux/smsc911x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/csb726.h> #include <mach/mfp-pxa27x.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pxa2xx-regs.h> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 4c766e3b4af3..c4bf08b3eb61 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,6 +4,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/spi/pxa2xx_spi.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/pmu.h> #include <mach/udc.h> @@ -16,7 +17,6 @@ #include <mach/camera.h> #include <mach/audio.h> #include <mach/hardware.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index a78bb3097739..b411d7cbf5a1 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -31,6 +31,7 @@ #include <linux/apm-emulation.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/regulator/userspace-consumer.h> #include <media/soc_camera.h> @@ -45,7 +46,6 @@ #include <mach/ohci.h> #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> -#include <plat/i2c.h> #include <mach/camera.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 87cec0abe5b0..93f05e024313 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -20,6 +20,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/leds-lp3944.h> +#include <linux/i2c/pxa-i2c.h> #include <media/soc_camera.h> @@ -30,7 +31,6 @@ #include <mach/pxa27x.h> #include <mach/pxafb.h> #include <mach/ohci.h> -#include <plat/i2c.h> #include <mach/hardware.h> #include <plat/pxa27x_keypad.h> #include <mach/camera.h> diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index a908e0a5f396..6de0ad0eea65 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -35,6 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -42,7 +43,6 @@ #include <mach/pxa27x.h> #include <mach/hx4700.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index ccb7bfad17ca..87c1ed9ccd2f 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -28,6 +28,7 @@ #include <linux/leds.h> #include <linux/mfd/da903x.h> #include <linux/i2c/max732x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -45,7 +46,6 @@ #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> #include <mach/littleton.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 41198f0dc3ac..5535991c4a3c 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -28,6 +28,7 @@ #include <linux/regulator/bq24022.h> #include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> +#include <linux/i2c/pxa-i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -36,7 +37,6 @@ #include <mach/pxa27x.h> #include <mach/magician.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d4b6f2375f2c..f9542220595a 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -27,6 +27,7 @@ #include <linux/gpio_keys.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -46,7 +47,6 @@ #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/irda.h> #include <mach/ohci.h> diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index faafea3542fb..78d98a8607ec 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -39,6 +39,7 @@ #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> #include <linux/slab.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -50,7 +51,6 @@ #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> -#include <plat/i2c.h> #include <mach/camera.h> #include <mach/audio.h> #include <media/soc_camera.h> diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index cdf7f41e2bb3..b5a8fd3fce04 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -22,8 +22,8 @@ #include <linux/serial_8250.h> #include <linux/dm9000.h> #include <linux/gpio.h> +#include <linux/i2c/pxa-i2c.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 35572c427fa8..72adb3ae2b43 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -22,6 +22,7 @@ #include <linux/power_supply.h> #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -36,8 +37,6 @@ #include <mach/palmasoc.h> #include <mach/palm27x.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 90820faa711a..9dbf3ccd4150 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -23,12 +23,12 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/pwm_backlight.h> #include <media/soc_camera.h> #include <asm/gpio.h> -#include <plat/i2c.h> #include <mach/camera.h> #include <asm/mach/map.h> #include <mach/pxa27x.h> diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 4f0ff1ab623d..35353af345d5 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -23,6 +23,7 @@ #include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/pxa2xx_spi.h> @@ -44,7 +45,6 @@ #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 28b11be00b3f..1cb5d0f9723f 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -19,6 +19,7 @@ #include <linux/sysdev.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -32,8 +33,6 @@ #include <mach/dma.h> #include <mach/smemc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" #include "clock.h" diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 1230343d9c70..f374247b8466 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -21,6 +21,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/sysdev.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -32,7 +33,6 @@ #include <mach/dma.h> #include <mach/regs-intc.h> #include <mach/smemc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index 437980f72710..23b229bd06e9 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/pm.h> #include <linux/platform_device.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sysdev.h> @@ -27,7 +28,6 @@ #include <mach/pm.h> #include <mach/dma.h> #include <mach/regs-intc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8361151be054..47094188e029 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -32,6 +32,7 @@ #include <linux/sched.h> #include <linux/pwm_backlight.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> #include <linux/lis3lv02d.h> @@ -53,7 +54,6 @@ #include <mach/ohci.h> #include <mach/pxafb.h> #include <mach/mmc.h> -#include <plat/i2c.h> #include <plat/pxa3xx_nand.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index c1ca8cb467fc..eb83c89428ef 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/fb.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/smc91x.h> #include <linux/mfd/da903x.h> #include <linux/mtd/mtd.h> @@ -31,7 +32,6 @@ #include <asm/mach/flash.h> #include <mach/pxa930.h> -#include <plat/i2c.h> #include <mach/pxafb.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index e497922f761a..9322fe527c7f 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> #include <asm/mach-types.h> @@ -24,8 +25,6 @@ #include <mach/mfp-pxa930.h> #include <mach/gpio.h> -#include <plat/i2c.h> - #include "generic.h" #define SAARB_NR_IRQS (IRQ_BOARD_START + 40) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index b49a2c21124c..38e2c0912b9a 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/leds.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -47,8 +48,6 @@ #include <mach/sharpsl_pm.h> #include <mach/smemc.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 9a14fdb83c82..cb5611daf5fe 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -25,6 +25,7 @@ #include <linux/mtd/plat-ram.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> #include <linux/smc91x.h> @@ -43,7 +44,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index 70191a9450eb..79f4422f12f4 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/gpio.h> #include <linux/mfd/88pm860x.h> @@ -23,8 +24,6 @@ #include <mach/pxa930.h> -#include <plat/i2c.h> - #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index f2582ec300d9..5ad3807af334 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -34,6 +34,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/input/matrix_keypad.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -41,7 +42,6 @@ #include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/irda.h> -#include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/tosa_bt.h> diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 423261d63d07..857bb2e63486 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -26,6 +26,7 @@ #include <linux/dm9000.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/types.h> #include <asm/setup.h> @@ -47,7 +48,6 @@ #include <mach/irda.h> #include <mach/ohci.h> #include <mach/smemc.h> -#include <plat/i2c.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 49eeeab23689..12279214c875 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -36,6 +36,7 @@ #include <linux/gpio.h> #include <linux/jiffies.h> #include <linux/i2c-gpio.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/serial_8250.h> #include <linux/smc91x.h> #include <linux/pwm_backlight.h> @@ -47,7 +48,6 @@ #include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <plat/i2c.h> #include <mach/regs-uart.h> #include <mach/arcom-pcmcia.h> #include <mach/viper.h> diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index b9b579715ff6..e709fd459268 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -26,6 +26,7 @@ #include <linux/ucb1400.h> #include <linux/ata_platform.h> #include <linux/regulator/max1586.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,8 +41,6 @@ #include <mach/udc.h> #include <mach/pata_pxa.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 51c0281c6e0a..f55f8f2e0db3 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/smc91x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -26,8 +27,6 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <plat/i2c.h> - #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa25x.h> diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index a323e076129e..aaf883754ef4 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -29,6 +29,7 @@ #include <linux/gpio_keys.h> #include <linux/delay.h> #include <linux/regulator/machine.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -40,8 +41,6 @@ #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> -#include <plat/i2c.h> - #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index b92aa3b8c4f7..730f51e57c17 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -25,6 +25,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/apm-emulation.h> #include <linux/can/platform/mcp251x.h> @@ -33,8 +34,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/i2c.h> - #include <mach/pxa2xx-regs.h> #include <mach/regs-uart.h> #include <mach/ohci.h> diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 3aa73b3e33f2..93c64d8d7de9 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -17,11 +17,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> +#include <linux/i2c/pxa-i2c.h> #include <linux/i2c/pca953x.h> #include <linux/gpio.h> #include <mach/pxa300.h> -#include <plat/i2c.h> #include <mach/zylonite.h> #include "generic.h" diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index cbfcf6fb4a61..14abb7bde741 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -452,6 +452,16 @@ config I2C_MV64XXX This driver can also be built as a module. If so, the module will be called i2c-mv64xxx. +config I2C_MXS + tristate "Freescale i.MX28 I2C interface" + depends on SOC_IMX28 + help + Say Y here if you want to use the I2C bus controller on + the Freescale i.MX28 processors. + + This driver can also be built as a module. If so, the module + will be called i2c-mxs. + config I2C_NOMADIK tristate "ST-Ericsson Nomadik/Ux500 I2C Controller" depends on PLAT_NOMADIK @@ -536,15 +546,18 @@ config I2C_PUV3 config I2C_PXA tristate "Intel PXA2XX I2C adapter" - depends on ARCH_PXA || ARCH_MMP + depends on ARCH_PXA || ARCH_MMP || (X86_32 && PCI && OF) help If you have devices in the PXA I2C bus, say yes to this option. This driver can also be built as a module. If so, the module will be called i2c-pxa. +config I2C_PXA_PCI + def_bool I2C_PXA && X86_32 && PCI && OF + config I2C_PXA_SLAVE bool "Intel PXA2XX I2C Slave comms support" - depends on I2C_PXA + depends on I2C_PXA && !X86_32 help Support I2C slave mode communications on the PXA I2C bus. This is necessary for systems where the PXA may be a target on the @@ -618,6 +631,13 @@ config I2C_STU300 This driver can also be built as a module. If so, the module will be called i2c-stu300. +config I2C_TEGRA + tristate "NVIDIA Tegra internal I2C controller" + depends on ARCH_TEGRA + help + If you say yes to this option, support will be included for the + I2C controller embedded in NVIDIA Tegra SOCs + config I2C_VERSATILE tristate "ARM Versatile/Realview I2C bus support" depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS @@ -650,15 +670,28 @@ config I2C_XILINX will be called xilinx_i2c. config I2C_EG20T - tristate "PCH I2C of Intel EG20T" - depends on PCI - help - This driver is for PCH(Platform controller Hub) I2C of EG20T which - is an IOH(Input/Output Hub) for x86 embedded processor. - This driver can access PCH I2C bus device. + tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH" + depends on PCI + help + This driver is for PCH(Platform controller Hub) I2C of EG20T which + is an IOH(Input/Output Hub) for x86 embedded processor. + This driver can access PCH I2C bus device. + + This driver also supports the ML7213, a companion chip for the + Atom E6xx series and compatible with the Intel EG20T PCH. comment "External I2C/SMBus adapter drivers" +config I2C_DIOLAN_U2C + tristate "Diolan U2C-12 USB adapter" + depends on USB + help + If you say yes to this option, support will be included for Diolan + U2C-12, a USB to I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-diolan-u2c. + config I2C_PARPORT tristate "Parallel port adapter" depends on PARPORT diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index a83966acc5ab..e6cf294d3729 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o +obj-$(CONFIG_I2C_MXS) += i2c-mxs.o obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o obj-$(CONFIG_I2C_NUC900) += i2c-nuc900.o obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o @@ -53,18 +54,21 @@ obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o +obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_S6000) += i2c-s6000.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o obj-$(CONFIG_I2C_STU300) += i2c-stu300.o +obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o # External I2C/SMBus adapter drivers +obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c new file mode 100644 index 000000000000..76366716a854 --- /dev/null +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -0,0 +1,535 @@ +/* + * Driver for the Diolan u2c-12 USB-I2C adapter + * + * Copyright (c) 2010-2011 Ericsson AB + * + * Derived from: + * i2c-tiny-usb.c + * Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/i2c.h> + +#define DRIVER_NAME "i2c-diolan-u2c" + +#define USB_VENDOR_ID_DIOLAN 0x0abf +#define USB_DEVICE_ID_DIOLAN_U2C 0x3370 + +#define DIOLAN_OUT_EP 0x02 +#define DIOLAN_IN_EP 0x84 + +/* commands via USB, must match command ids in the firmware */ +#define CMD_I2C_READ 0x01 +#define CMD_I2C_WRITE 0x02 +#define CMD_I2C_SCAN 0x03 /* Returns list of detected devices */ +#define CMD_I2C_RELEASE_SDA 0x04 +#define CMD_I2C_RELEASE_SCL 0x05 +#define CMD_I2C_DROP_SDA 0x06 +#define CMD_I2C_DROP_SCL 0x07 +#define CMD_I2C_READ_SDA 0x08 +#define CMD_I2C_READ_SCL 0x09 +#define CMD_GET_FW_VERSION 0x0a +#define CMD_GET_SERIAL 0x0b +#define CMD_I2C_START 0x0c +#define CMD_I2C_STOP 0x0d +#define CMD_I2C_REPEATED_START 0x0e +#define CMD_I2C_PUT_BYTE 0x0f +#define CMD_I2C_GET_BYTE 0x10 +#define CMD_I2C_PUT_ACK 0x11 +#define CMD_I2C_GET_ACK 0x12 +#define CMD_I2C_PUT_BYTE_ACK 0x13 +#define CMD_I2C_GET_BYTE_ACK 0x14 +#define CMD_I2C_SET_SPEED 0x1b +#define CMD_I2C_GET_SPEED 0x1c +#define CMD_I2C_SET_CLK_SYNC 0x24 +#define CMD_I2C_GET_CLK_SYNC 0x25 +#define CMD_I2C_SET_CLK_SYNC_TO 0x26 +#define CMD_I2C_GET_CLK_SYNC_TO 0x27 + +#define RESP_OK 0x00 +#define RESP_FAILED 0x01 +#define RESP_BAD_MEMADDR 0x04 +#define RESP_DATA_ERR 0x05 +#define RESP_NOT_IMPLEMENTED 0x06 +#define RESP_NACK 0x07 +#define RESP_TIMEOUT 0x09 + +#define U2C_I2C_SPEED_FAST 0 /* 400 kHz */ +#define U2C_I2C_SPEED_STD 1 /* 100 kHz */ +#define U2C_I2C_SPEED_2KHZ 242 /* 2 kHz, minimum speed */ +#define U2C_I2C_SPEED(f) ((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1) + +#define U2C_I2C_FREQ_FAST 400000 +#define U2C_I2C_FREQ_STD 100000 +#define U2C_I2C_FREQ(s) (1000000 / (2 * (s - 1) + 10)) + +#define DIOLAN_USB_TIMEOUT 100 /* in ms */ +#define DIOLAN_SYNC_TIMEOUT 20 /* in ms */ + +#define DIOLAN_OUTBUF_LEN 128 +#define DIOLAN_FLUSH_LEN (DIOLAN_OUTBUF_LEN - 4) +#define DIOLAN_INBUF_LEN 256 /* Maximum supported receive length */ + +/* Structure to hold all of our device specific stuff */ +struct i2c_diolan_u2c { + u8 obuffer[DIOLAN_OUTBUF_LEN]; /* output buffer */ + u8 ibuffer[DIOLAN_INBUF_LEN]; /* input buffer */ + struct usb_device *usb_dev; /* the usb device for this device */ + struct usb_interface *interface;/* the interface for this device */ + struct i2c_adapter adapter; /* i2c related things */ + int olen; /* Output buffer length */ + int ocount; /* Number of enqueued messages */ +}; + +static uint frequency = U2C_I2C_FREQ_STD; /* I2C clock frequency in Hz */ + +module_param(frequency, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz"); + +/* usb layer */ + +/* Send command to device, and get response. */ +static int diolan_usb_transfer(struct i2c_diolan_u2c *dev) +{ + int ret = 0; + int actual; + int i; + + if (!dev->olen || !dev->ocount) + return -EINVAL; + + ret = usb_bulk_msg(dev->usb_dev, + usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP), + dev->obuffer, dev->olen, &actual, + DIOLAN_USB_TIMEOUT); + if (!ret) { + for (i = 0; i < dev->ocount; i++) { + int tmpret; + + tmpret = usb_bulk_msg(dev->usb_dev, + usb_rcvbulkpipe(dev->usb_dev, + DIOLAN_IN_EP), + dev->ibuffer, + sizeof(dev->ibuffer), &actual, + DIOLAN_USB_TIMEOUT); + /* + * Stop command processing if a previous command + * returned an error. + * Note that we still need to retrieve all messages. + */ + if (ret < 0) + continue; + ret = tmpret; + if (ret == 0 && actual > 0) { + switch (dev->ibuffer[actual - 1]) { + case RESP_NACK: + /* + * Return ENXIO if NACK was received as + * response to the address phase, + * EIO otherwise + */ + ret = i == 1 ? -ENXIO : -EIO; + break; + case RESP_TIMEOUT: + ret = -ETIMEDOUT; + break; + case RESP_OK: + /* strip off return code */ + ret = actual - 1; + break; + default: + ret = -EIO; + break; + } + } + } + } + dev->olen = 0; + dev->ocount = 0; + return ret; +} + +static int diolan_write_cmd(struct i2c_diolan_u2c *dev, bool flush) +{ + if (flush || dev->olen >= DIOLAN_FLUSH_LEN) + return diolan_usb_transfer(dev); + return 0; +} + +/* Send command (no data) */ +static int diolan_usb_cmd(struct i2c_diolan_u2c *dev, u8 command, bool flush) +{ + dev->obuffer[dev->olen++] = command; + dev->ocount++; + return diolan_write_cmd(dev, flush); +} + +/* Send command with one byte of data */ +static int diolan_usb_cmd_data(struct i2c_diolan_u2c *dev, u8 command, u8 data, + bool flush) +{ + dev->obuffer[dev->olen++] = command; + dev->obuffer[dev->olen++] = data; + dev->ocount++; + return diolan_write_cmd(dev, flush); +} + +/* Send command with two bytes of data */ +static int diolan_usb_cmd_data2(struct i2c_diolan_u2c *dev, u8 command, u8 d1, + u8 d2, bool flush) +{ + dev->obuffer[dev->olen++] = command; + dev->obuffer[dev->olen++] = d1; + dev->obuffer[dev->olen++] = d2; + dev->ocount++; + return diolan_write_cmd(dev, flush); +} + +/* + * Flush input queue. + * If we don't do this at startup and the controller has queued up + * messages which were not retrieved, it will stop responding + * at some point. + */ +static void diolan_flush_input(struct i2c_diolan_u2c *dev) +{ + int i; + + for (i = 0; i < 10; i++) { + int actual = 0; + int ret; + + ret = usb_bulk_msg(dev->usb_dev, + usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP), + dev->ibuffer, sizeof(dev->ibuffer), &actual, + DIOLAN_USB_TIMEOUT); + if (ret < 0 || actual == 0) + break; + } + if (i == 10) + dev_err(&dev->interface->dev, "Failed to flush input buffer\n"); +} + +static int diolan_i2c_start(struct i2c_diolan_u2c *dev) +{ + return diolan_usb_cmd(dev, CMD_I2C_START, false); +} + +static int diolan_i2c_repeated_start(struct i2c_diolan_u2c *dev) +{ + return diolan_usb_cmd(dev, CMD_I2C_REPEATED_START, false); +} + +static int diolan_i2c_stop(struct i2c_diolan_u2c *dev) +{ + return diolan_usb_cmd(dev, CMD_I2C_STOP, true); +} + +static int diolan_i2c_get_byte_ack(struct i2c_diolan_u2c *dev, bool ack, + u8 *byte) +{ + int ret; + + ret = diolan_usb_cmd_data(dev, CMD_I2C_GET_BYTE_ACK, ack, true); + if (ret > 0) + *byte = dev->ibuffer[0]; + else if (ret == 0) + ret = -EIO; + + return ret; +} + +static int diolan_i2c_put_byte_ack(struct i2c_diolan_u2c *dev, u8 byte) +{ + return diolan_usb_cmd_data(dev, CMD_I2C_PUT_BYTE_ACK, byte, false); +} + +static int diolan_set_speed(struct i2c_diolan_u2c *dev, u8 speed) +{ + return diolan_usb_cmd_data(dev, CMD_I2C_SET_SPEED, speed, true); +} + +/* Enable or disable clock synchronization (stretching) */ +static int diolan_set_clock_synch(struct i2c_diolan_u2c *dev, bool enable) +{ + return diolan_usb_cmd_data(dev, CMD_I2C_SET_CLK_SYNC, enable, true); +} + +/* Set clock synchronization timeout in ms */ +static int diolan_set_clock_synch_timeout(struct i2c_diolan_u2c *dev, int ms) +{ + int to_val = ms * 10; + + return diolan_usb_cmd_data2(dev, CMD_I2C_SET_CLK_SYNC_TO, + to_val & 0xff, (to_val >> 8) & 0xff, true); +} + +static void diolan_fw_version(struct i2c_diolan_u2c *dev) +{ + int ret; + + ret = diolan_usb_cmd(dev, CMD_GET_FW_VERSION, true); + if (ret >= 2) + dev_info(&dev->interface->dev, + "Diolan U2C firmware version %u.%u\n", + (unsigned int)dev->ibuffer[0], + (unsigned int)dev->ibuffer[1]); +} + +static void diolan_get_serial(struct i2c_diolan_u2c *dev) +{ + int ret; + u32 serial; + + ret = diolan_usb_cmd(dev, CMD_GET_SERIAL, true); + if (ret >= 4) { + serial = le32_to_cpu(*(u32 *)dev->ibuffer); + dev_info(&dev->interface->dev, + "Diolan U2C serial number %u\n", serial); + } +} + +static int diolan_init(struct i2c_diolan_u2c *dev) +{ + int speed, ret; + + if (frequency >= 200000) { + speed = U2C_I2C_SPEED_FAST; + frequency = U2C_I2C_FREQ_FAST; + } else if (frequency >= 100000 || frequency == 0) { + speed = U2C_I2C_SPEED_STD; + frequency = U2C_I2C_FREQ_STD; + } else { + speed = U2C_I2C_SPEED(frequency); + if (speed > U2C_I2C_SPEED_2KHZ) + speed = U2C_I2C_SPEED_2KHZ; + frequency = U2C_I2C_FREQ(speed); + } + + dev_info(&dev->interface->dev, + "Diolan U2C at USB bus %03d address %03d speed %d Hz\n", + dev->usb_dev->bus->busnum, dev->usb_dev->devnum, frequency); + + diolan_flush_input(dev); + diolan_fw_version(dev); + diolan_get_serial(dev); + + /* Set I2C speed */ + ret = diolan_set_speed(dev, speed); + if (ret < 0) + return ret; + + /* Configure I2C clock synchronization */ + ret = diolan_set_clock_synch(dev, speed != U2C_I2C_SPEED_FAST); + if (ret < 0) + return ret; + + if (speed != U2C_I2C_SPEED_FAST) + ret = diolan_set_clock_synch_timeout(dev, DIOLAN_SYNC_TIMEOUT); + + return ret; +} + +/* i2c layer */ + +static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, + int num) +{ + struct i2c_diolan_u2c *dev = i2c_get_adapdata(adapter); + struct i2c_msg *pmsg; + int i, j; + int ret, sret; + + ret = diolan_i2c_start(dev); + if (ret < 0) + return ret; + + for (i = 0; i < num; i++) { + pmsg = &msgs[i]; + if (i) { + ret = diolan_i2c_repeated_start(dev); + if (ret < 0) + goto abort; + } + if (pmsg->flags & I2C_M_RD) { + ret = + diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1); + if (ret < 0) + goto abort; + for (j = 0; j < pmsg->len; j++) { + u8 byte; + bool ack = j < pmsg->len - 1; + + /* + * Don't send NACK if this is the first byte + * of a SMBUS_BLOCK message. + */ + if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) + ack = true; + + ret = diolan_i2c_get_byte_ack(dev, ack, &byte); + if (ret < 0) + goto abort; + /* + * Adjust count if first received byte is length + */ + if (j == 0 && (pmsg->flags & I2C_M_RECV_LEN)) { + if (byte == 0 + || byte > I2C_SMBUS_BLOCK_MAX) { + ret = -EPROTO; + goto abort; + } + pmsg->len += byte; + } + pmsg->buf[j] = byte; + } + } else { + ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1); + if (ret < 0) + goto abort; + for (j = 0; j < pmsg->len; j++) { + ret = diolan_i2c_put_byte_ack(dev, + pmsg->buf[j]); + if (ret < 0) + goto abort; + } + } + } +abort: + sret = diolan_i2c_stop(dev); + if (sret < 0 && ret >= 0) + ret = sret; + return ret; +} + +/* + * Return list of supported functionality. + */ +static u32 diolan_usb_func(struct i2c_adapter *a) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; +} + +static const struct i2c_algorithm diolan_usb_algorithm = { + .master_xfer = diolan_usb_xfer, + .functionality = diolan_usb_func, +}; + +/* device layer */ + +static const struct usb_device_id diolan_u2c_table[] = { + { USB_DEVICE(USB_VENDOR_ID_DIOLAN, USB_DEVICE_ID_DIOLAN_U2C) }, + { } +}; + +MODULE_DEVICE_TABLE(usb, diolan_u2c_table); + +static void diolan_u2c_free(struct i2c_diolan_u2c *dev) +{ + usb_put_dev(dev->usb_dev); + kfree(dev); +} + +static int diolan_u2c_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct i2c_diolan_u2c *dev; + int ret; + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + dev_err(&interface->dev, "no memory for device state\n"); + ret = -ENOMEM; + goto error; + } + + dev->usb_dev = usb_get_dev(interface_to_usbdev(interface)); + dev->interface = interface; + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + /* setup i2c adapter description */ + dev->adapter.owner = THIS_MODULE; + dev->adapter.class = I2C_CLASS_HWMON; + dev->adapter.algo = &diolan_usb_algorithm; + i2c_set_adapdata(&dev->adapter, dev); + snprintf(dev->adapter.name, sizeof(dev->adapter.name), + DRIVER_NAME " at bus %03d device %03d", + dev->usb_dev->bus->busnum, dev->usb_dev->devnum); + + dev->adapter.dev.parent = &dev->interface->dev; + + /* initialize diolan i2c interface */ + ret = diolan_init(dev); + if (ret < 0) { + dev_err(&interface->dev, "failed to initialize adapter\n"); + goto error_free; + } + + /* and finally attach to i2c layer */ + ret = i2c_add_adapter(&dev->adapter); + if (ret < 0) { + dev_err(&interface->dev, "failed to add I2C adapter\n"); + goto error_free; + } + + dev_dbg(&interface->dev, "connected " DRIVER_NAME "\n"); + + return 0; + +error_free: + usb_set_intfdata(interface, NULL); + diolan_u2c_free(dev); +error: + return ret; +} + +static void diolan_u2c_disconnect(struct usb_interface *interface) +{ + struct i2c_diolan_u2c *dev = usb_get_intfdata(interface); + + i2c_del_adapter(&dev->adapter); + usb_set_intfdata(interface, NULL); + diolan_u2c_free(dev); + + dev_dbg(&interface->dev, "disconnected\n"); +} + +static struct usb_driver diolan_u2c_driver = { + .name = DRIVER_NAME, + .probe = diolan_u2c_probe, + .disconnect = diolan_u2c_disconnect, + .id_table = diolan_u2c_table, +}; + +static int __init diolan_u2c_init(void) +{ + /* register this driver with the USB subsystem */ + return usb_register(&diolan_u2c_driver); +} + +static void __exit diolan_u2c_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&diolan_u2c_driver); +} + +module_init(diolan_u2c_init); +module_exit(diolan_u2c_exit); + +MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); +MODULE_DESCRIPTION(DRIVER_NAME " driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 50ea1f43bdc1..878a12026af2 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -132,6 +132,13 @@ #define pch_pci_dbg(pdev, fmt, arg...) \ dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg) +/* +Set the number of I2C instance max +Intel EG20T PCH : 1ch +OKI SEMICONDUCTOR ML7213 IOH : 2ch +*/ +#define PCH_I2C_MAX_DEV 2 + /** * struct i2c_algo_pch_data - for I2C driver functionalities * @pch_adapter: stores the reference to i2c_adapter structure @@ -156,12 +163,14 @@ struct i2c_algo_pch_data { * @pch_data: stores a list of i2c_algo_pch_data * @pch_i2c_suspended: specifies whether the system is suspended or not * perhaps with more lines and words. + * @ch_num: specifies the number of i2c instance * * pch_data has as many elements as maximum I2C channels */ struct adapter_info { - struct i2c_algo_pch_data pch_data; + struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV]; bool pch_i2c_suspended; + int ch_num; }; @@ -170,8 +179,13 @@ static int pch_clk = 50000; /* specifies I2C clock speed in KHz */ static wait_queue_head_t pch_event; static DEFINE_MUTEX(pch_mutex); +/* Definition for ML7213 by OKI SEMICONDUCTOR */ +#define PCI_VENDOR_ID_ROHM 0x10DB +#define PCI_DEVICE_ID_ML7213_I2C 0x802D + static struct pci_device_id __devinitdata pch_pcidev_id[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_I2C)}, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, }, {0,} }; @@ -212,8 +226,7 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap) /* Initialize I2C registers */ iowrite32(0x21, p + PCH_I2CNF); - pch_setbit(adap->pch_base_address, PCH_I2CCTL, - PCH_I2CCTL_I2CMEN); + pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN); if (pch_i2c_speed != 400) pch_i2c_speed = 100; @@ -255,7 +268,7 @@ static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2) * @timeout: waiting time counter (us). */ static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap, - s32 timeout) + s32 timeout) { void __iomem *p = adap->pch_base_address; @@ -475,8 +488,8 @@ static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap) * @last: specifies whether last message or not. * @first: specifies whether first message or not. */ -s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, - u32 last, u32 first) +static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, + u32 last, u32 first) { struct i2c_algo_pch_data *adap = i2c_adap->algo_data; @@ -569,10 +582,10 @@ s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, } /** - * pch_i2c_cb_ch0() - Interrupt handler Call back function + * pch_i2c_cb() - Interrupt handler Call back function * @adap: Pointer to struct i2c_algo_pch_data. */ -static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap) +static void pch_i2c_cb(struct i2c_algo_pch_data *adap) { u32 sts; void __iomem *p = adap->pch_base_address; @@ -600,24 +613,30 @@ static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap) */ static irqreturn_t pch_i2c_handler(int irq, void *pData) { - s32 reg_val; - - struct i2c_algo_pch_data *adap_data = (struct i2c_algo_pch_data *)pData; - void __iomem *p = adap_data->pch_base_address; - u32 mode = ioread32(p + PCH_I2CMOD) & (BUFFER_MODE | EEPROM_SR_MODE); - - if (mode != NORMAL_MODE) { - pch_err(adap_data, "I2C mode is not supported\n"); - return IRQ_NONE; + u32 reg_val; + int flag; + int i; + struct adapter_info *adap_info = pData; + void __iomem *p; + u32 mode; + + for (i = 0, flag = 0; i < adap_info->ch_num; i++) { + p = adap_info->pch_data[i].pch_base_address; + mode = ioread32(p + PCH_I2CMOD); + mode &= BUFFER_MODE | EEPROM_SR_MODE; + if (mode != NORMAL_MODE) { + pch_err(adap_info->pch_data, + "I2C-%d mode(%d) is not supported\n", mode, i); + continue; + } + reg_val = ioread32(p + PCH_I2CSR); + if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) { + pch_i2c_cb(&adap_info->pch_data[i]); + flag = 1; + } } - reg_val = ioread32(p + PCH_I2CSR); - if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) - pch_i2c_cb_ch0(adap_data); - else - return IRQ_NONE; - - return IRQ_HANDLED; + return flag ? IRQ_HANDLED : IRQ_NONE; } /** @@ -627,7 +646,7 @@ static irqreturn_t pch_i2c_handler(int irq, void *pData) * @num: number of messages. */ static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap, - struct i2c_msg *msgs, s32 num) + struct i2c_msg *msgs, s32 num) { struct i2c_msg *pmsg; u32 i = 0; @@ -710,11 +729,13 @@ static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap) } static int __devinit pch_i2c_probe(struct pci_dev *pdev, - const struct pci_device_id *id) + const struct pci_device_id *id) { void __iomem *base_addr; - s32 ret; + int ret; + int i, j; struct adapter_info *adap_info; + struct i2c_adapter *pch_adap; pch_pci_dbg(pdev, "Entered.\n"); @@ -744,44 +765,48 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, goto err_pci_iomap; } - adap_info->pch_i2c_suspended = false; + /* Set the number of I2C channel instance */ + adap_info->ch_num = id->driver_data; - adap_info->pch_data.p_adapter_info = adap_info; + for (i = 0; i < adap_info->ch_num; i++) { + pch_adap = &adap_info->pch_data[i].pch_adapter; + adap_info->pch_i2c_suspended = false; - adap_info->pch_data.pch_adapter.owner = THIS_MODULE; - adap_info->pch_data.pch_adapter.class = I2C_CLASS_HWMON; - strcpy(adap_info->pch_data.pch_adapter.name, KBUILD_MODNAME); - adap_info->pch_data.pch_adapter.algo = &pch_algorithm; - adap_info->pch_data.pch_adapter.algo_data = - &adap_info->pch_data; + adap_info->pch_data[i].p_adapter_info = adap_info; - /* (i * 0x80) + base_addr; */ - adap_info->pch_data.pch_base_address = base_addr; + pch_adap->owner = THIS_MODULE; + pch_adap->class = I2C_CLASS_HWMON; + strcpy(pch_adap->name, KBUILD_MODNAME); + pch_adap->algo = &pch_algorithm; + pch_adap->algo_data = &adap_info->pch_data[i]; - adap_info->pch_data.pch_adapter.dev.parent = &pdev->dev; + /* base_addr + offset; */ + adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i; - ret = i2c_add_adapter(&(adap_info->pch_data.pch_adapter)); + pch_adap->dev.parent = &pdev->dev; - if (ret) { - pch_pci_err(pdev, "i2c_add_adapter FAILED\n"); - goto err_i2c_add_adapter; - } + ret = i2c_add_adapter(pch_adap); + if (ret) { + pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i); + goto err_i2c_add_adapter; + } - pch_i2c_init(&adap_info->pch_data); + pch_i2c_init(&adap_info->pch_data[i]); + } ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, - KBUILD_MODNAME, &adap_info->pch_data); + KBUILD_MODNAME, adap_info); if (ret) { pch_pci_err(pdev, "request_irq FAILED\n"); - goto err_request_irq; + goto err_i2c_add_adapter; } pci_set_drvdata(pdev, adap_info); pch_pci_dbg(pdev, "returns %d.\n", ret); return 0; -err_request_irq: - i2c_del_adapter(&(adap_info->pch_data.pch_adapter)); err_i2c_add_adapter: + for (j = 0; j < i; j++) + i2c_del_adapter(&adap_info->pch_data[j].pch_adapter); pci_iounmap(pdev, base_addr); err_pci_iomap: pci_release_regions(pdev); @@ -794,17 +819,22 @@ err_pci_enable: static void __devexit pch_i2c_remove(struct pci_dev *pdev) { + int i; struct adapter_info *adap_info = pci_get_drvdata(pdev); - pch_i2c_disbl_int(&adap_info->pch_data); - free_irq(pdev->irq, &adap_info->pch_data); - i2c_del_adapter(&(adap_info->pch_data.pch_adapter)); + free_irq(pdev->irq, adap_info); - if (adap_info->pch_data.pch_base_address) { - pci_iounmap(pdev, adap_info->pch_data.pch_base_address); - adap_info->pch_data.pch_base_address = 0; + for (i = 0; i < adap_info->ch_num; i++) { + pch_i2c_disbl_int(&adap_info->pch_data[i]); + i2c_del_adapter(&adap_info->pch_data[i].pch_adapter); } + if (adap_info->pch_data[0].pch_base_address) + pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address); + + for (i = 0; i < adap_info->ch_num; i++) + adap_info->pch_data[i].pch_base_address = 0; + pci_set_drvdata(pdev, NULL); pci_release_regions(pdev); @@ -817,17 +847,22 @@ static void __devexit pch_i2c_remove(struct pci_dev *pdev) static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state) { int ret; + int i; struct adapter_info *adap_info = pci_get_drvdata(pdev); - void __iomem *p = adap_info->pch_data.pch_base_address; + void __iomem *p = adap_info->pch_data[0].pch_base_address; adap_info->pch_i2c_suspended = true; - while ((adap_info->pch_data.pch_i2c_xfer_in_progress)) { - /* Wait until all channel transfers are completed */ - msleep(20); + for (i = 0; i < adap_info->ch_num; i++) { + while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) { + /* Wait until all channel transfers are completed */ + msleep(20); + } } + /* Disable the i2c interrupts */ - pch_i2c_disbl_int(&adap_info->pch_data); + for (i = 0; i < adap_info->ch_num; i++) + pch_i2c_disbl_int(&adap_info->pch_data[i]); pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x " "invoked function pch_i2c_disbl_int successfully\n", @@ -850,6 +885,7 @@ static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state) static int pch_i2c_resume(struct pci_dev *pdev) { + int i; struct adapter_info *adap_info = pci_get_drvdata(pdev); pci_set_power_state(pdev, PCI_D0); @@ -862,7 +898,8 @@ static int pch_i2c_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3hot, 0); - pch_i2c_init(&adap_info->pch_data); + for (i = 0; i < adap_info->ch_num; i++) + pch_i2c_init(&adap_info->pch_data[i]); adap_info->pch_i2c_suspended = false; @@ -894,7 +931,7 @@ static void __exit pch_pci_exit(void) } module_exit(pch_pci_exit); -MODULE_DESCRIPTION("PCH I2C PCI Driver"); +MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH I2C Driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.okisemi.com>"); module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR)); diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c new file mode 100644 index 000000000000..8022e2390a5a --- /dev/null +++ b/drivers/i2c/busses/i2c-mxs.c @@ -0,0 +1,412 @@ +/* + * Freescale MXS I2C bus driver + * + * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K. + * + * based on a (non-working) driver which was: + * + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * TODO: add dma-support if platform-support for it is available + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/completion.h> +#include <linux/platform_device.h> +#include <linux/jiffies.h> +#include <linux/io.h> + +#include <mach/common.h> + +#define DRIVER_NAME "mxs-i2c" + +#define MXS_I2C_CTRL0 (0x00) +#define MXS_I2C_CTRL0_SET (0x04) + +#define MXS_I2C_CTRL0_SFTRST 0x80000000 +#define MXS_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000 +#define MXS_I2C_CTRL0_RETAIN_CLOCK 0x00200000 +#define MXS_I2C_CTRL0_POST_SEND_STOP 0x00100000 +#define MXS_I2C_CTRL0_PRE_SEND_START 0x00080000 +#define MXS_I2C_CTRL0_MASTER_MODE 0x00020000 +#define MXS_I2C_CTRL0_DIRECTION 0x00010000 +#define MXS_I2C_CTRL0_XFER_COUNT(v) ((v) & 0x0000FFFF) + +#define MXS_I2C_CTRL1 (0x40) +#define MXS_I2C_CTRL1_SET (0x44) +#define MXS_I2C_CTRL1_CLR (0x48) + +#define MXS_I2C_CTRL1_BUS_FREE_IRQ 0x80 +#define MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x40 +#define MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x20 +#define MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x10 +#define MXS_I2C_CTRL1_EARLY_TERM_IRQ 0x08 +#define MXS_I2C_CTRL1_MASTER_LOSS_IRQ 0x04 +#define MXS_I2C_CTRL1_SLAVE_STOP_IRQ 0x02 +#define MXS_I2C_CTRL1_SLAVE_IRQ 0x01 + +#define MXS_I2C_IRQ_MASK (MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | \ + MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ | \ + MXS_I2C_CTRL1_EARLY_TERM_IRQ | \ + MXS_I2C_CTRL1_MASTER_LOSS_IRQ | \ + MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \ + MXS_I2C_CTRL1_SLAVE_IRQ) + +#define MXS_I2C_QUEUECTRL (0x60) +#define MXS_I2C_QUEUECTRL_SET (0x64) +#define MXS_I2C_QUEUECTRL_CLR (0x68) + +#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20 +#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04 + +#define MXS_I2C_QUEUESTAT (0x70) +#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 + +#define MXS_I2C_QUEUECMD (0x80) + +#define MXS_I2C_QUEUEDATA (0x90) + +#define MXS_I2C_DATA (0xa0) + + +#define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \ + MXS_I2C_CTRL0_PRE_SEND_START | \ + MXS_I2C_CTRL0_MASTER_MODE | \ + MXS_I2C_CTRL0_DIRECTION | \ + MXS_I2C_CTRL0_XFER_COUNT(1)) + +#define MXS_CMD_I2C_WRITE (MXS_I2C_CTRL0_PRE_SEND_START | \ + MXS_I2C_CTRL0_MASTER_MODE | \ + MXS_I2C_CTRL0_DIRECTION) + +#define MXS_CMD_I2C_READ (MXS_I2C_CTRL0_SEND_NAK_ON_LAST | \ + MXS_I2C_CTRL0_MASTER_MODE) + +/** + * struct mxs_i2c_dev - per device, private MXS-I2C data + * + * @dev: driver model device node + * @regs: IO registers pointer + * @cmd_complete: completion object for transaction wait + * @cmd_err: error code for last transaction + * @adapter: i2c subsystem adapter node + */ +struct mxs_i2c_dev { + struct device *dev; + void __iomem *regs; + struct completion cmd_complete; + u32 cmd_err; + struct i2c_adapter adapter; +}; + +/* + * TODO: check if calls to here are really needed. If not, we could get rid of + * mxs_reset_block and the mach-dependency. Needs an I2C analyzer, probably. + */ +static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) +{ + mxs_reset_block(i2c->regs); + writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); +} + +static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len, + int flags) +{ + u32 data; + + writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD); + + data = (addr << 1) | I2C_SMBUS_READ; + writel(data, i2c->regs + MXS_I2C_DATA); + + data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags; + writel(data, i2c->regs + MXS_I2C_QUEUECMD); +} + +static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c, + u8 addr, u8 *buf, int len, int flags) +{ + u32 data; + int i, shifts_left; + + data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags; + writel(data, i2c->regs + MXS_I2C_QUEUECMD); + + /* + * We have to copy the slave address (u8) and buffer (arbitrary number + * of u8) into the data register (u32). To achieve that, the u8 are put + * into the MSBs of 'data' which is then shifted for the next u8. When + * apropriate, 'data' is written to MXS_I2C_DATA. So, the first u32 + * looks like this: + * + * 3 2 1 0 + * 10987654|32109876|54321098|76543210 + * --------+--------+--------+-------- + * buffer+2|buffer+1|buffer+0|slave_addr + */ + + data = ((addr << 1) | I2C_SMBUS_WRITE) << 24; + + for (i = 0; i < len; i++) { + data >>= 8; + data |= buf[i] << 24; + if ((i & 3) == 2) + writel(data, i2c->regs + MXS_I2C_DATA); + } + + /* Write out the remaining bytes if any */ + shifts_left = 24 - (i & 3) * 8; + if (shifts_left) + writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA); +} + +/* + * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the + * rd_threshold to 1). Couldn't get this to work, though. + */ +static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + while (readl(i2c->regs + MXS_I2C_QUEUESTAT) + & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) { + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + cond_resched(); + } + + return 0; +} + +static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len) +{ + u32 data; + int i; + + for (i = 0; i < len; i++) { + if ((i & 3) == 0) { + if (mxs_i2c_wait_for_data(i2c)) + return -ETIMEDOUT; + data = readl(i2c->regs + MXS_I2C_QUEUEDATA); + } + buf[i] = data & 0xff; + data >>= 8; + } + + return 0; +} + +/* + * Low level master read/write transaction. + */ +static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, + int stop) +{ + struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap); + int ret; + int flags; + + init_completion(&i2c->cmd_complete); + + dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", + msg->addr, msg->len, msg->flags, stop); + + if (msg->len == 0) + return -EINVAL; + + flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; + + if (msg->flags & I2C_M_RD) + mxs_i2c_pioq_setup_read(i2c, msg->addr, msg->len, flags); + else + mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf, msg->len, + flags); + + writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, + i2c->regs + MXS_I2C_QUEUECTRL_SET); + + ret = wait_for_completion_timeout(&i2c->cmd_complete, + msecs_to_jiffies(1000)); + if (ret == 0) + goto timeout; + + if ((!i2c->cmd_err) && (msg->flags & I2C_M_RD)) { + ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len); + if (ret) + goto timeout; + } + + if (i2c->cmd_err == -ENXIO) + mxs_i2c_reset(i2c); + + dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err); + + return i2c->cmd_err; + +timeout: + dev_dbg(i2c->dev, "Timeout!\n"); + mxs_i2c_reset(i2c); + return -ETIMEDOUT; +} + +static int mxs_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + int num) +{ + int i; + int err; + + for (i = 0; i < num; i++) { + err = mxs_i2c_xfer_msg(adap, &msgs[i], i == (num - 1)); + if (err) + return err; + } + + return num; +} + +static u32 mxs_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); +} + +static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) +{ + struct mxs_i2c_dev *i2c = dev_id; + u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; + + if (!stat) + return IRQ_NONE; + + if (stat & MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ) + i2c->cmd_err = -ENXIO; + else if (stat & (MXS_I2C_CTRL1_EARLY_TERM_IRQ | + MXS_I2C_CTRL1_MASTER_LOSS_IRQ | + MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ)) + /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ + i2c->cmd_err = -EIO; + else + i2c->cmd_err = 0; + + complete(&i2c->cmd_complete); + + writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); + return IRQ_HANDLED; +} + +static const struct i2c_algorithm mxs_i2c_algo = { + .master_xfer = mxs_i2c_xfer, + .functionality = mxs_i2c_func, +}; + +static int __devinit mxs_i2c_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mxs_i2c_dev *i2c; + struct i2c_adapter *adap; + struct resource *res; + resource_size_t res_size; + int err, irq; + + i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOENT; + + res_size = resource_size(res); + if (!devm_request_mem_region(dev, res->start, res_size, res->name)) + return -EBUSY; + + i2c->regs = devm_ioremap_nocache(dev, res->start, res_size); + if (!i2c->regs) + return -EBUSY; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c); + if (err) + return err; + + i2c->dev = dev; + platform_set_drvdata(pdev, i2c); + + /* Do reset to enforce correct startup after pinmuxing */ + mxs_i2c_reset(i2c); + writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, + i2c->regs + MXS_I2C_QUEUECTRL_SET); + + adap = &i2c->adapter; + strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name)); + adap->owner = THIS_MODULE; + adap->algo = &mxs_i2c_algo; + adap->dev.parent = dev; + adap->nr = pdev->id; + i2c_set_adapdata(adap, i2c); + err = i2c_add_numbered_adapter(adap); + if (err) { + dev_err(dev, "Failed to add adapter (%d)\n", err); + writel(MXS_I2C_CTRL0_SFTRST, + i2c->regs + MXS_I2C_CTRL0_SET); + return err; + } + + return 0; +} + +static int __devexit mxs_i2c_remove(struct platform_device *pdev) +{ + struct mxs_i2c_dev *i2c = platform_get_drvdata(pdev); + int ret; + + ret = i2c_del_adapter(&i2c->adapter); + if (ret) + return -EBUSY; + + writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, + i2c->regs + MXS_I2C_QUEUECTRL_CLR); + writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver mxs_i2c_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .remove = __devexit_p(mxs_i2c_remove), +}; + +static int __init mxs_i2c_init(void) +{ + return platform_driver_probe(&mxs_i2c_driver, mxs_i2c_probe); +} +subsys_initcall(mxs_i2c_init); + +static void __exit mxs_i2c_exit(void) +{ + platform_driver_unregister(&mxs_i2c_driver); +} +module_exit(mxs_i2c_exit); + +MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>"); +MODULE_DESCRIPTION("MXS I2C Bus Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c new file mode 100644 index 000000000000..6659d269b841 --- /dev/null +++ b/drivers/i2c/busses/i2c-pxa-pci.c @@ -0,0 +1,176 @@ +/* + * The CE4100's I2C device is more or less the same one as found on PXA. + * It does not support slave mode, the register slightly moved. This PCI + * device provides three bars, every contains a single I2C controller. + */ +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/i2c/pxa-i2c.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> + +#define CE4100_PCI_I2C_DEVS 3 + +struct ce4100_devices { + struct platform_device *pdev[CE4100_PCI_I2C_DEVS]; +}; + +static struct platform_device *add_i2c_device(struct pci_dev *dev, int bar) +{ + struct platform_device *pdev; + struct i2c_pxa_platform_data pdata; + struct resource res[2]; + struct device_node *child; + static int devnum; + int ret; + + memset(&pdata, 0, sizeof(struct i2c_pxa_platform_data)); + memset(&res, 0, sizeof(res)); + + res[0].flags = IORESOURCE_MEM; + res[0].start = pci_resource_start(dev, bar); + res[0].end = pci_resource_end(dev, bar); + + res[1].flags = IORESOURCE_IRQ; + res[1].start = dev->irq; + res[1].end = dev->irq; + + for_each_child_of_node(dev->dev.of_node, child) { + const void *prop; + struct resource r; + int ret; + + ret = of_address_to_resource(child, 0, &r); + if (ret < 0) + continue; + if (r.start != res[0].start) + continue; + if (r.end != res[0].end) + continue; + if (r.flags != res[0].flags) + continue; + + prop = of_get_property(child, "fast-mode", NULL); + if (prop) + pdata.fast_mode = 1; + + break; + } + + if (!child) { + dev_err(&dev->dev, "failed to match a DT node for bar %d.\n", + bar); + ret = -EINVAL; + goto out; + } + + pdev = platform_device_alloc("ce4100-i2c", devnum); + if (!pdev) { + of_node_put(child); + ret = -ENOMEM; + goto out; + } + pdev->dev.parent = &dev->dev; + pdev->dev.of_node = child; + + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); + if (ret) + goto err; + + ret = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (ret) + goto err; + + ret = platform_device_add(pdev); + if (ret) + goto err; + devnum++; + return pdev; +err: + platform_device_put(pdev); +out: + return ERR_PTR(ret); +} + +static int __devinit ce4100_i2c_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int ret; + int i; + struct ce4100_devices *sds; + + ret = pci_enable_device_mem(dev); + if (ret) + return ret; + + if (!dev->dev.of_node) { + dev_err(&dev->dev, "Missing device tree node.\n"); + return -EINVAL; + } + sds = kzalloc(sizeof(*sds), GFP_KERNEL); + if (!sds) + goto err_mem; + + for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) { + sds->pdev[i] = add_i2c_device(dev, i); + if (IS_ERR(sds->pdev[i])) { + while (--i >= 0) + platform_device_unregister(sds->pdev[i]); + goto err_dev_add; + } + } + pci_set_drvdata(dev, sds); + return 0; + +err_dev_add: + pci_set_drvdata(dev, NULL); + kfree(sds); +err_mem: + pci_disable_device(dev); + return ret; +} + +static void __devexit ce4100_i2c_remove(struct pci_dev *dev) +{ + struct ce4100_devices *sds; + unsigned int i; + + sds = pci_get_drvdata(dev); + pci_set_drvdata(dev, NULL); + + for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) + platform_device_unregister(sds->pdev[i]); + + pci_disable_device(dev); + kfree(sds); +} + +static struct pci_device_id ce4100_i2c_devices[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)}, + { }, +}; +MODULE_DEVICE_TABLE(pci, ce4100_i2c_devices); + +static struct pci_driver ce4100_i2c_driver = { + .name = "ce4100_i2c", + .id_table = ce4100_i2c_devices, + .probe = ce4100_i2c_probe, + .remove = __devexit_p(ce4100_i2c_remove), +}; + +static int __init ce4100_i2c_init(void) +{ + return pci_register_driver(&ce4100_i2c_driver); +} +module_init(ce4100_i2c_init); + +static void __exit ce4100_i2c_exit(void) +{ + pci_unregister_driver(&ce4100_i2c_driver); +} +module_exit(ce4100_i2c_exit); + +MODULE_DESCRIPTION("CE4100 PCI-I2C glue code for PXA's driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index f4c19a97e0b3..cab529d12d2f 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -29,38 +29,75 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/i2c-pxa.h> +#include <linux/of_i2c.h> #include <linux/platform_device.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/slab.h> #include <linux/io.h> +#include <linux/i2c/pxa-i2c.h> #include <asm/irq.h> -#include <plat/i2c.h> + +#ifdef CONFIG_X86 +#define clk_get(dev, id) NULL +#define clk_put(clk) do { } while (0) +#define clk_disable(clk) do { } while (0) +#define clk_enable(clk) do { } while (0) +#endif + +struct pxa_reg_layout { + u32 ibmr; + u32 idbr; + u32 icr; + u32 isr; + u32 isar; +}; + +enum pxa_i2c_types { + REGS_PXA2XX, + REGS_PXA3XX, + REGS_CE4100, +}; /* - * I2C register offsets will be shifted 0 or 1 bit left, depending on - * different SoCs + * I2C registers definitions */ -#define REG_SHIFT_0 (0 << 0) -#define REG_SHIFT_1 (1 << 0) -#define REG_SHIFT(d) ((d) & 0x1) +static struct pxa_reg_layout pxa_reg_layout[] = { + [REGS_PXA2XX] = { + .ibmr = 0x00, + .idbr = 0x08, + .icr = 0x10, + .isr = 0x18, + .isar = 0x20, + }, + [REGS_PXA3XX] = { + .ibmr = 0x00, + .idbr = 0x04, + .icr = 0x08, + .isr = 0x0c, + .isar = 0x10, + }, + [REGS_CE4100] = { + .ibmr = 0x14, + .idbr = 0x0c, + .icr = 0x00, + .isr = 0x04, + /* no isar register */ + }, +}; static const struct platform_device_id i2c_pxa_id_table[] = { - { "pxa2xx-i2c", REG_SHIFT_1 }, - { "pxa3xx-pwri2c", REG_SHIFT_0 }, + { "pxa2xx-i2c", REGS_PXA2XX }, + { "pxa3xx-pwri2c", REGS_PXA3XX }, + { "ce4100-i2c", REGS_CE4100 }, { }, }; MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); /* - * I2C registers and bit definitions + * I2C bit definitions */ -#define IBMR (0x00) -#define IDBR (0x08) -#define ICR (0x10) -#define ISR (0x18) -#define ISAR (0x20) #define ICR_START (1 << 0) /* start bit */ #define ICR_STOP (1 << 1) /* stop bit */ @@ -111,7 +148,11 @@ struct pxa_i2c { u32 icrlog[32]; void __iomem *reg_base; - unsigned int reg_shift; + void __iomem *reg_ibmr; + void __iomem *reg_idbr; + void __iomem *reg_icr; + void __iomem *reg_isr; + void __iomem *reg_isar; unsigned long iobase; unsigned long iosize; @@ -121,11 +162,11 @@ struct pxa_i2c { unsigned int fast_mode :1; }; -#define _IBMR(i2c) ((i2c)->reg_base + (0x0 << (i2c)->reg_shift)) -#define _IDBR(i2c) ((i2c)->reg_base + (0x4 << (i2c)->reg_shift)) -#define _ICR(i2c) ((i2c)->reg_base + (0x8 << (i2c)->reg_shift)) -#define _ISR(i2c) ((i2c)->reg_base + (0xc << (i2c)->reg_shift)) -#define _ISAR(i2c) ((i2c)->reg_base + (0x10 << (i2c)->reg_shift)) +#define _IBMR(i2c) ((i2c)->reg_ibmr) +#define _IDBR(i2c) ((i2c)->reg_idbr) +#define _ICR(i2c) ((i2c)->reg_icr) +#define _ISR(i2c) ((i2c)->reg_isr) +#define _ISAR(i2c) ((i2c)->reg_isar) /* * I2C Slave mode address @@ -418,7 +459,8 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) writel(I2C_ISR_INIT, _ISR(i2c)); writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); - writel(i2c->slave_addr, _ISAR(i2c)); + if (i2c->reg_isar) + writel(i2c->slave_addr, _ISAR(i2c)); /* set control register values */ writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c)); @@ -729,8 +771,10 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) */ ret = i2c->msg_idx; - if (timeout == 0) + if (!timeout && i2c->msg_num) { i2c_pxa_scream_blue_murder(i2c, "timeout"); + ret = I2C_RETRY; + } out: return ret; @@ -915,11 +959,16 @@ static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) writel(icr, _ICR(i2c)); } +#define VALID_INT_SOURCE (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \ + ISR_SAD | ISR_BED) static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) { struct pxa_i2c *i2c = dev_id; u32 isr = readl(_ISR(i2c)); + if (!(isr & VALID_INT_SOURCE)) + return IRQ_NONE; + if (i2c_debug > 2 && 0) { dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n", __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c))); @@ -934,7 +983,7 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) /* * Always clear all pending IRQs. */ - writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c)); + writel(isr & VALID_INT_SOURCE, _ISR(i2c)); if (isr & ISR_SAD) i2c_pxa_slave_start(i2c, isr); @@ -1001,6 +1050,7 @@ static int i2c_pxa_probe(struct platform_device *dev) struct resource *res; struct i2c_pxa_platform_data *plat = dev->dev.platform_data; const struct platform_device_id *id = platform_get_device_id(dev); + enum pxa_i2c_types i2c_type = id->driver_data; int ret; int irq; @@ -1044,7 +1094,13 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = -EIO; goto eremap; } - i2c->reg_shift = REG_SHIFT(id->driver_data); + + i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr; + i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr; + i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr; + i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr; + if (i2c_type != REGS_CE4100) + i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar; i2c->iobase = res->start; i2c->iosize = resource_size(res); @@ -1072,7 +1128,7 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.algo = &i2c_pxa_pio_algorithm; } else { i2c->adap.algo = &i2c_pxa_algorithm; - ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED, + ret = request_irq(irq, i2c_pxa_handler, IRQF_SHARED, i2c->adap.name, i2c); if (ret) goto ereqirq; @@ -1082,12 +1138,19 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &dev->dev; +#ifdef CONFIG_OF + i2c->adap.dev.of_node = dev->dev.of_node; +#endif - ret = i2c_add_numbered_adapter(&i2c->adap); + if (i2c_type == REGS_CE4100) + ret = i2c_add_adapter(&i2c->adap); + else + ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { printk(KERN_INFO "I2C: Failed to add bus\n"); goto eadapt; } + of_i2c_register_devices(&i2c->adap); platform_set_drvdata(dev, i2c); diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c new file mode 100644 index 000000000000..3921f664c9c3 --- /dev/null +++ b/drivers/i2c/busses/i2c-tegra.c @@ -0,0 +1,700 @@ +/* + * drivers/i2c/busses/i2c-tegra.c + * + * Copyright (C) 2010 Google, Inc. + * Author: Colin Cross <ccross@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/i2c-tegra.h> + +#include <asm/unaligned.h> + +#include <mach/clk.h> + +#define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000)) +#define BYTES_PER_FIFO_WORD 4 + +#define I2C_CNFG 0x000 +#define I2C_CNFG_PACKET_MODE_EN (1<<10) +#define I2C_CNFG_NEW_MASTER_FSM (1<<11) +#define I2C_SL_CNFG 0x020 +#define I2C_SL_CNFG_NEWSL (1<<2) +#define I2C_SL_ADDR1 0x02c +#define I2C_TX_FIFO 0x050 +#define I2C_RX_FIFO 0x054 +#define I2C_PACKET_TRANSFER_STATUS 0x058 +#define I2C_FIFO_CONTROL 0x05c +#define I2C_FIFO_CONTROL_TX_FLUSH (1<<1) +#define I2C_FIFO_CONTROL_RX_FLUSH (1<<0) +#define I2C_FIFO_CONTROL_TX_TRIG_SHIFT 5 +#define I2C_FIFO_CONTROL_RX_TRIG_SHIFT 2 +#define I2C_FIFO_STATUS 0x060 +#define I2C_FIFO_STATUS_TX_MASK 0xF0 +#define I2C_FIFO_STATUS_TX_SHIFT 4 +#define I2C_FIFO_STATUS_RX_MASK 0x0F +#define I2C_FIFO_STATUS_RX_SHIFT 0 +#define I2C_INT_MASK 0x064 +#define I2C_INT_STATUS 0x068 +#define I2C_INT_PACKET_XFER_COMPLETE (1<<7) +#define I2C_INT_ALL_PACKETS_XFER_COMPLETE (1<<6) +#define I2C_INT_TX_FIFO_OVERFLOW (1<<5) +#define I2C_INT_RX_FIFO_UNDERFLOW (1<<4) +#define I2C_INT_NO_ACK (1<<3) +#define I2C_INT_ARBITRATION_LOST (1<<2) +#define I2C_INT_TX_FIFO_DATA_REQ (1<<1) +#define I2C_INT_RX_FIFO_DATA_REQ (1<<0) +#define I2C_CLK_DIVISOR 0x06c + +#define DVC_CTRL_REG1 0x000 +#define DVC_CTRL_REG1_INTR_EN (1<<10) +#define DVC_CTRL_REG2 0x004 +#define DVC_CTRL_REG3 0x008 +#define DVC_CTRL_REG3_SW_PROG (1<<26) +#define DVC_CTRL_REG3_I2C_DONE_INTR_EN (1<<30) +#define DVC_STATUS 0x00c +#define DVC_STATUS_I2C_DONE_INTR (1<<30) + +#define I2C_ERR_NONE 0x00 +#define I2C_ERR_NO_ACK 0x01 +#define I2C_ERR_ARBITRATION_LOST 0x02 + +#define PACKET_HEADER0_HEADER_SIZE_SHIFT 28 +#define PACKET_HEADER0_PACKET_ID_SHIFT 16 +#define PACKET_HEADER0_CONT_ID_SHIFT 12 +#define PACKET_HEADER0_PROTOCOL_I2C (1<<4) + +#define I2C_HEADER_HIGHSPEED_MODE (1<<22) +#define I2C_HEADER_CONT_ON_NAK (1<<21) +#define I2C_HEADER_SEND_START_BYTE (1<<20) +#define I2C_HEADER_READ (1<<19) +#define I2C_HEADER_10BIT_ADDR (1<<18) +#define I2C_HEADER_IE_ENABLE (1<<17) +#define I2C_HEADER_REPEAT_START (1<<16) +#define I2C_HEADER_MASTER_ADDR_SHIFT 12 +#define I2C_HEADER_SLAVE_ADDR_SHIFT 1 + +/** + * struct tegra_i2c_dev - per device i2c context + * @dev: device reference for power management + * @adapter: core i2c layer adapter information + * @clk: clock reference for i2c controller + * @i2c_clk: clock reference for i2c bus + * @iomem: memory resource for registers + * @base: ioremapped registers cookie + * @cont_id: i2c controller id, used for for packet header + * @irq: irq number of transfer complete interrupt + * @is_dvc: identifies the DVC i2c controller, has a different register layout + * @msg_complete: transfer completion notifier + * @msg_err: error code for completed message + * @msg_buf: pointer to current message data + * @msg_buf_remaining: size of unsent data in the message buffer + * @msg_read: identifies read transfers + * @bus_clk_rate: current i2c bus clock rate + * @is_suspended: prevents i2c controller accesses after suspend is called + */ +struct tegra_i2c_dev { + struct device *dev; + struct i2c_adapter adapter; + struct clk *clk; + struct clk *i2c_clk; + struct resource *iomem; + void __iomem *base; + int cont_id; + int irq; + int is_dvc; + struct completion msg_complete; + int msg_err; + u8 *msg_buf; + size_t msg_buf_remaining; + int msg_read; + unsigned long bus_clk_rate; + bool is_suspended; +}; + +static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg) +{ + writel(val, i2c_dev->base + reg); +} + +static u32 dvc_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg) +{ + return readl(i2c_dev->base + reg); +} + +/* + * i2c_writel and i2c_readl will offset the register if necessary to talk + * to the I2C block inside the DVC block + */ +static unsigned long tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev, + unsigned long reg) +{ + if (i2c_dev->is_dvc) + reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40; + return reg; +} + +static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, + unsigned long reg) +{ + writel(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg)); +} + +static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg) +{ + return readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg)); +} + +static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data, + unsigned long reg, int len) +{ + writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len); +} + +static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data, + unsigned long reg, int len) +{ + readsl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len); +} + +static void tegra_i2c_mask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask) +{ + u32 int_mask = i2c_readl(i2c_dev, I2C_INT_MASK); + int_mask &= ~mask; + i2c_writel(i2c_dev, int_mask, I2C_INT_MASK); +} + +static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask) +{ + u32 int_mask = i2c_readl(i2c_dev, I2C_INT_MASK); + int_mask |= mask; + i2c_writel(i2c_dev, int_mask, I2C_INT_MASK); +} + +static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev) +{ + unsigned long timeout = jiffies + HZ; + u32 val = i2c_readl(i2c_dev, I2C_FIFO_CONTROL); + val |= I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH; + i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL); + + while (i2c_readl(i2c_dev, I2C_FIFO_CONTROL) & + (I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH)) { + if (time_after(jiffies, timeout)) { + dev_warn(i2c_dev->dev, "timeout waiting for fifo flush\n"); + return -ETIMEDOUT; + } + msleep(1); + } + return 0; +} + +static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev) +{ + u32 val; + int rx_fifo_avail; + u8 *buf = i2c_dev->msg_buf; + size_t buf_remaining = i2c_dev->msg_buf_remaining; + int words_to_transfer; + + val = i2c_readl(i2c_dev, I2C_FIFO_STATUS); + rx_fifo_avail = (val & I2C_FIFO_STATUS_RX_MASK) >> + I2C_FIFO_STATUS_RX_SHIFT; + + /* Rounds down to not include partial word at the end of buf */ + words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD; + if (words_to_transfer > rx_fifo_avail) + words_to_transfer = rx_fifo_avail; + + i2c_readsl(i2c_dev, buf, I2C_RX_FIFO, words_to_transfer); + + buf += words_to_transfer * BYTES_PER_FIFO_WORD; + buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD; + rx_fifo_avail -= words_to_transfer; + + /* + * If there is a partial word at the end of buf, handle it manually to + * prevent overwriting past the end of buf + */ + if (rx_fifo_avail > 0 && buf_remaining > 0) { + BUG_ON(buf_remaining > 3); + val = i2c_readl(i2c_dev, I2C_RX_FIFO); + memcpy(buf, &val, buf_remaining); + buf_remaining = 0; + rx_fifo_avail--; + } + + BUG_ON(rx_fifo_avail > 0 && buf_remaining > 0); + i2c_dev->msg_buf_remaining = buf_remaining; + i2c_dev->msg_buf = buf; + return 0; +} + +static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev) +{ + u32 val; + int tx_fifo_avail; + u8 *buf = i2c_dev->msg_buf; + size_t buf_remaining = i2c_dev->msg_buf_remaining; + int words_to_transfer; + + val = i2c_readl(i2c_dev, I2C_FIFO_STATUS); + tx_fifo_avail = (val & I2C_FIFO_STATUS_TX_MASK) >> + I2C_FIFO_STATUS_TX_SHIFT; + + /* Rounds down to not include partial word at the end of buf */ + words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD; + if (words_to_transfer > tx_fifo_avail) + words_to_transfer = tx_fifo_avail; + + i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer); + + buf += words_to_transfer * BYTES_PER_FIFO_WORD; + buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD; + tx_fifo_avail -= words_to_transfer; + + /* + * If there is a partial word at the end of buf, handle it manually to + * prevent reading past the end of buf, which could cross a page + * boundary and fault. + */ + if (tx_fifo_avail > 0 && buf_remaining > 0) { + BUG_ON(buf_remaining > 3); + memcpy(&val, buf, buf_remaining); + i2c_writel(i2c_dev, val, I2C_TX_FIFO); + buf_remaining = 0; + tx_fifo_avail--; + } + + BUG_ON(tx_fifo_avail > 0 && buf_remaining > 0); + i2c_dev->msg_buf_remaining = buf_remaining; + i2c_dev->msg_buf = buf; + return 0; +} + +/* + * One of the Tegra I2C blocks is inside the DVC (Digital Voltage Controller) + * block. This block is identical to the rest of the I2C blocks, except that + * it only supports master mode, it has registers moved around, and it needs + * some extra init to get it into I2C mode. The register moves are handled + * by i2c_readl and i2c_writel + */ +static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev) +{ + u32 val = 0; + val = dvc_readl(i2c_dev, DVC_CTRL_REG3); + val |= DVC_CTRL_REG3_SW_PROG; + val |= DVC_CTRL_REG3_I2C_DONE_INTR_EN; + dvc_writel(i2c_dev, val, DVC_CTRL_REG3); + + val = dvc_readl(i2c_dev, DVC_CTRL_REG1); + val |= DVC_CTRL_REG1_INTR_EN; + dvc_writel(i2c_dev, val, DVC_CTRL_REG1); +} + +static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) +{ + u32 val; + int err = 0; + + clk_enable(i2c_dev->clk); + + tegra_periph_reset_assert(i2c_dev->clk); + udelay(2); + tegra_periph_reset_deassert(i2c_dev->clk); + + if (i2c_dev->is_dvc) + tegra_dvc_init(i2c_dev); + + val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN; + i2c_writel(i2c_dev, val, I2C_CNFG); + i2c_writel(i2c_dev, 0, I2C_INT_MASK); + clk_set_rate(i2c_dev->clk, i2c_dev->bus_clk_rate * 8); + + val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT | + 0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT; + i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL); + + if (tegra_i2c_flush_fifos(i2c_dev)) + err = -ETIMEDOUT; + + clk_disable(i2c_dev->clk); + return err; +} + +static irqreturn_t tegra_i2c_isr(int irq, void *dev_id) +{ + u32 status; + const u32 status_err = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST; + struct tegra_i2c_dev *i2c_dev = dev_id; + + status = i2c_readl(i2c_dev, I2C_INT_STATUS); + + if (status == 0) { + dev_warn(i2c_dev->dev, "interrupt with no status\n"); + return IRQ_NONE; + } + + if (unlikely(status & status_err)) { + if (status & I2C_INT_NO_ACK) + i2c_dev->msg_err |= I2C_ERR_NO_ACK; + if (status & I2C_INT_ARBITRATION_LOST) + i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST; + complete(&i2c_dev->msg_complete); + goto err; + } + + if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) { + if (i2c_dev->msg_buf_remaining) + tegra_i2c_empty_rx_fifo(i2c_dev); + else + BUG(); + } + + if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) { + if (i2c_dev->msg_buf_remaining) + tegra_i2c_fill_tx_fifo(i2c_dev); + else + tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ); + } + + if ((status & I2C_INT_PACKET_XFER_COMPLETE) && + !i2c_dev->msg_buf_remaining) + complete(&i2c_dev->msg_complete); + + i2c_writel(i2c_dev, status, I2C_INT_STATUS); + if (i2c_dev->is_dvc) + dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); + return IRQ_HANDLED; +err: + /* An error occured, mask all interrupts */ + tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST | + I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ | + I2C_INT_RX_FIFO_DATA_REQ); + i2c_writel(i2c_dev, status, I2C_INT_STATUS); + return IRQ_HANDLED; +} + +static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, + struct i2c_msg *msg, int stop) +{ + u32 packet_header; + u32 int_mask; + int ret; + + tegra_i2c_flush_fifos(i2c_dev); + i2c_writel(i2c_dev, 0xFF, I2C_INT_STATUS); + + if (msg->len == 0) + return -EINVAL; + + i2c_dev->msg_buf = msg->buf; + i2c_dev->msg_buf_remaining = msg->len; + i2c_dev->msg_err = I2C_ERR_NONE; + i2c_dev->msg_read = (msg->flags & I2C_M_RD); + INIT_COMPLETION(i2c_dev->msg_complete); + + packet_header = (0 << PACKET_HEADER0_HEADER_SIZE_SHIFT) | + PACKET_HEADER0_PROTOCOL_I2C | + (i2c_dev->cont_id << PACKET_HEADER0_CONT_ID_SHIFT) | + (1 << PACKET_HEADER0_PACKET_ID_SHIFT); + i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); + + packet_header = msg->len - 1; + i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); + + packet_header = msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT; + packet_header |= I2C_HEADER_IE_ENABLE; + if (msg->flags & I2C_M_TEN) + packet_header |= I2C_HEADER_10BIT_ADDR; + if (msg->flags & I2C_M_IGNORE_NAK) + packet_header |= I2C_HEADER_CONT_ON_NAK; + if (msg->flags & I2C_M_NOSTART) + packet_header |= I2C_HEADER_REPEAT_START; + if (msg->flags & I2C_M_RD) + packet_header |= I2C_HEADER_READ; + i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); + + if (!(msg->flags & I2C_M_RD)) + tegra_i2c_fill_tx_fifo(i2c_dev); + + int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST; + if (msg->flags & I2C_M_RD) + int_mask |= I2C_INT_RX_FIFO_DATA_REQ; + else if (i2c_dev->msg_buf_remaining) + int_mask |= I2C_INT_TX_FIFO_DATA_REQ; + tegra_i2c_unmask_irq(i2c_dev, int_mask); + dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n", + i2c_readl(i2c_dev, I2C_INT_MASK)); + + ret = wait_for_completion_timeout(&i2c_dev->msg_complete, TEGRA_I2C_TIMEOUT); + tegra_i2c_mask_irq(i2c_dev, int_mask); + + if (WARN_ON(ret == 0)) { + dev_err(i2c_dev->dev, "i2c transfer timed out\n"); + + tegra_i2c_init(i2c_dev); + return -ETIMEDOUT; + } + + dev_dbg(i2c_dev->dev, "transfer complete: %d %d %d\n", + ret, completion_done(&i2c_dev->msg_complete), i2c_dev->msg_err); + + if (likely(i2c_dev->msg_err == I2C_ERR_NONE)) + return 0; + + tegra_i2c_init(i2c_dev); + if (i2c_dev->msg_err == I2C_ERR_NO_ACK) { + if (msg->flags & I2C_M_IGNORE_NAK) + return 0; + return -EREMOTEIO; + } + + return -EIO; +} + +static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + int num) +{ + struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap); + int i; + int ret = 0; + + if (i2c_dev->is_suspended) + return -EBUSY; + + clk_enable(i2c_dev->clk); + for (i = 0; i < num; i++) { + int stop = (i == (num - 1)) ? 1 : 0; + ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], stop); + if (ret) + break; + } + clk_disable(i2c_dev->clk); + return ret ?: i; +} + +static u32 tegra_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static const struct i2c_algorithm tegra_i2c_algo = { + .master_xfer = tegra_i2c_xfer, + .functionality = tegra_i2c_func, +}; + +static int tegra_i2c_probe(struct platform_device *pdev) +{ + struct tegra_i2c_dev *i2c_dev; + struct tegra_i2c_platform_data *pdata = pdev->dev.platform_data; + struct resource *res; + struct resource *iomem; + struct clk *clk; + struct clk *i2c_clk; + void *base; + int irq; + int ret = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no mem resource\n"); + return -EINVAL; + } + iomem = request_mem_region(res->start, resource_size(res), pdev->name); + if (!iomem) { + dev_err(&pdev->dev, "I2C region already claimed\n"); + return -EBUSY; + } + + base = ioremap(iomem->start, resource_size(iomem)); + if (!base) { + dev_err(&pdev->dev, "Cannot ioremap I2C region\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(&pdev->dev, "no irq resource\n"); + ret = -EINVAL; + goto err_iounmap; + } + irq = res->start; + + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "missing controller clock"); + ret = PTR_ERR(clk); + goto err_release_region; + } + + i2c_clk = clk_get(&pdev->dev, "i2c"); + if (IS_ERR(i2c_clk)) { + dev_err(&pdev->dev, "missing bus clock"); + ret = PTR_ERR(i2c_clk); + goto err_clk_put; + } + + i2c_dev = kzalloc(sizeof(struct tegra_i2c_dev), GFP_KERNEL); + if (!i2c_dev) { + ret = -ENOMEM; + goto err_i2c_clk_put; + } + + i2c_dev->base = base; + i2c_dev->clk = clk; + i2c_dev->i2c_clk = i2c_clk; + i2c_dev->iomem = iomem; + i2c_dev->adapter.algo = &tegra_i2c_algo; + i2c_dev->irq = irq; + i2c_dev->cont_id = pdev->id; + i2c_dev->dev = &pdev->dev; + i2c_dev->bus_clk_rate = pdata ? pdata->bus_clk_rate : 100000; + + if (pdev->id == 3) + i2c_dev->is_dvc = 1; + init_completion(&i2c_dev->msg_complete); + + platform_set_drvdata(pdev, i2c_dev); + + ret = tegra_i2c_init(i2c_dev); + if (ret) { + dev_err(&pdev->dev, "Failed to initialize i2c controller"); + goto err_free; + } + + ret = request_irq(i2c_dev->irq, tegra_i2c_isr, 0, pdev->name, i2c_dev); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq); + goto err_free; + } + + clk_enable(i2c_dev->i2c_clk); + + i2c_set_adapdata(&i2c_dev->adapter, i2c_dev); + i2c_dev->adapter.owner = THIS_MODULE; + i2c_dev->adapter.class = I2C_CLASS_HWMON; + strlcpy(i2c_dev->adapter.name, "Tegra I2C adapter", + sizeof(i2c_dev->adapter.name)); + i2c_dev->adapter.algo = &tegra_i2c_algo; + i2c_dev->adapter.dev.parent = &pdev->dev; + i2c_dev->adapter.nr = pdev->id; + + ret = i2c_add_numbered_adapter(&i2c_dev->adapter); + if (ret) { + dev_err(&pdev->dev, "Failed to add I2C adapter\n"); + goto err_free_irq; + } + + return 0; +err_free_irq: + free_irq(i2c_dev->irq, i2c_dev); +err_free: + kfree(i2c_dev); +err_i2c_clk_put: + clk_put(i2c_clk); +err_clk_put: + clk_put(clk); +err_release_region: + release_mem_region(iomem->start, resource_size(iomem)); +err_iounmap: + iounmap(base); + return ret; +} + +static int tegra_i2c_remove(struct platform_device *pdev) +{ + struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + i2c_del_adapter(&i2c_dev->adapter); + free_irq(i2c_dev->irq, i2c_dev); + clk_put(i2c_dev->i2c_clk); + clk_put(i2c_dev->clk); + release_mem_region(i2c_dev->iomem->start, + resource_size(i2c_dev->iomem)); + iounmap(i2c_dev->base); + kfree(i2c_dev); + return 0; +} + +#ifdef CONFIG_PM +static int tegra_i2c_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + + i2c_lock_adapter(&i2c_dev->adapter); + i2c_dev->is_suspended = true; + i2c_unlock_adapter(&i2c_dev->adapter); + + return 0; +} + +static int tegra_i2c_resume(struct platform_device *pdev) +{ + struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + int ret; + + i2c_lock_adapter(&i2c_dev->adapter); + + ret = tegra_i2c_init(i2c_dev); + + if (ret) { + i2c_unlock_adapter(&i2c_dev->adapter); + return ret; + } + + i2c_dev->is_suspended = false; + + i2c_unlock_adapter(&i2c_dev->adapter); + + return 0; +} +#endif + +static struct platform_driver tegra_i2c_driver = { + .probe = tegra_i2c_probe, + .remove = tegra_i2c_remove, +#ifdef CONFIG_PM + .suspend = tegra_i2c_suspend, + .resume = tegra_i2c_resume, +#endif + .driver = { + .name = "tegra-i2c", + .owner = THIS_MODULE, + }, +}; + +static int __init tegra_i2c_init_driver(void) +{ + return platform_driver_register(&tegra_i2c_driver); +} + +static void __exit tegra_i2c_exit_driver(void) +{ + platform_driver_unregister(&tegra_i2c_driver); +} + +subsys_initcall(tegra_i2c_init_driver); +module_exit(tegra_i2c_exit_driver); + +MODULE_DESCRIPTION("nVidia Tegra2 I2C Bus Controller driver"); +MODULE_AUTHOR("Colin Cross"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/i2c-tegra.h b/include/linux/i2c-tegra.h new file mode 100644 index 000000000000..9c85da49857a --- /dev/null +++ b/include/linux/i2c-tegra.h @@ -0,0 +1,25 @@ +/* + * drivers/i2c/busses/i2c-tegra.c + * + * Copyright (C) 2010 Google, Inc. + * Author: Colin Cross <ccross@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _LINUX_I2C_TEGRA_H +#define _LINUX_I2C_TEGRA_H + +struct tegra_i2c_platform_data { + unsigned long bus_clk_rate; +}; + +#endif /* _LINUX_I2C_TEGRA_H */ diff --git a/arch/arm/plat-pxa/include/plat/i2c.h b/include/linux/i2c/pxa-i2c.h index 1a9f65e6ec0f..1a9f65e6ec0f 100644 --- a/arch/arm/plat-pxa/include/plat/i2c.h +++ b/include/linux/i2c/pxa-i2c.h |