summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--net/ipv4/netfilter/Kconfig78
-rw-r--r--net/ipv6/netfilter/Kconfig44
-rw-r--r--net/netfilter/Kconfig100
3 files changed, 111 insertions, 111 deletions
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index 07757ac8d5d8..087b82906848 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -62,15 +62,16 @@ config IP_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
# The matches.
-config IP_NF_MATCH_ECN
- tristate '"ecn" match support'
+config IP_NF_MATCH_ADDRTYPE
+ tristate '"addrtype" address type match support'
depends on IP_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
- This option adds a `ECN' match, which allows you to match against
- the IPv4 and TCP header ECN fields.
+ This option allows you to match what routing thinks of an address,
+ eg. UNICAST, LOCAL, BROADCAST, ...
- To compile it as a module, choose M here. If unsure, say N.
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config IP_NF_MATCH_AH
tristate '"ah" match support'
@@ -82,26 +83,25 @@ config IP_NF_MATCH_AH
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_MATCH_TTL
- tristate '"ttl" match support'
+config IP_NF_MATCH_ECN
+ tristate '"ecn" match support'
depends on IP_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
- This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
- to match packets by their TTL value.
+ This option adds a `ECN' match, which allows you to match against
+ the IPv4 and TCP header ECN fields.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_MATCH_ADDRTYPE
- tristate '"addrtype" address type match support'
+config IP_NF_MATCH_TTL
+ tristate '"ttl" match support'
depends on IP_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
- This option allows you to match what routing thinks of an address,
- eg. UNICAST, LOCAL, BROADCAST, ...
+ This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
+ to match packets by their TTL value.
- If you want to compile it as a module, say M here and read
- <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
+ To compile it as a module, choose M here. If unsure, say N.
# `filter', generic and specific targets
config IP_NF_FILTER
@@ -186,26 +186,26 @@ config IP_NF_TARGET_MASQUERADE
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_REDIRECT
- tristate "REDIRECT target support"
+config IP_NF_TARGET_NETMAP
+ tristate "NETMAP target support"
depends on NF_NAT
depends on NETFILTER_ADVANCED
help
- REDIRECT is a special case of NAT: all incoming connections are
- mapped onto the incoming interface's address, causing the packets to
- come to the local machine instead of passing through. This is
- useful for transparent proxies.
+ NETMAP is an implementation of static 1:1 NAT mapping of network
+ addresses. It maps the network address part, while keeping the host
+ address part intact.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_NETMAP
- tristate "NETMAP target support"
+config IP_NF_TARGET_REDIRECT
+ tristate "REDIRECT target support"
depends on NF_NAT
depends on NETFILTER_ADVANCED
help
- NETMAP is an implementation of static 1:1 NAT mapping of network
- addresses. It maps the network address part, while keeping the host
- address part intact.
+ REDIRECT is a special case of NAT: all incoming connections are
+ mapped onto the incoming interface's address, causing the packets to
+ come to the local machine instead of passing through. This is
+ useful for transparent proxies.
To compile it as a module, choose M here. If unsure, say N.
@@ -300,6 +300,19 @@ config IP_NF_MANGLE
To compile it as a module, choose M here. If unsure, say N.
+config IP_NF_TARGET_CLUSTERIP
+ tristate "CLUSTERIP target support (EXPERIMENTAL)"
+ depends on IP_NF_MANGLE && EXPERIMENTAL
+ depends on NF_CONNTRACK_IPV4
+ depends on NETFILTER_ADVANCED
+ select NF_CONNTRACK_MARK
+ help
+ The CLUSTERIP target allows you to build load-balancing clusters of
+ network servers without having a dedicated load-balancing
+ router/server/switch.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config IP_NF_TARGET_ECN
tristate "ECN target support"
depends on IP_NF_MANGLE
@@ -330,19 +343,6 @@ config IP_NF_TARGET_TTL
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_CLUSTERIP
- tristate "CLUSTERIP target support (EXPERIMENTAL)"
- depends on IP_NF_MANGLE && EXPERIMENTAL
- depends on NF_CONNTRACK_IPV4
- depends on NETFILTER_ADVANCED
- select NF_CONNTRACK_MARK
- help
- The CLUSTERIP target allows you to build load-balancing clusters of
- network servers without having a dedicated load-balancing
- router/server/switch.
-
- To compile it as a module, choose M here. If unsure, say N.
-
# raw + specific targets
config IP_NF_RAW
tristate 'raw table support (required for NOTRACK/TRACE)'
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index fee881bd31ff..91ffba08c29f 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -56,23 +56,23 @@ config IP6_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
# The simple matches.
-config IP6_NF_MATCH_RT
- tristate '"rt" Routing header match support'
+config IP6_NF_MATCH_AH
+ tristate '"ah" match support'
depends on IP6_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
- rt matching allows you to match packets based on the routing
- header of the packet.
+ This module allows one to match AH packets.
To compile it as a module, choose M here. If unsure, say N.
-config IP6_NF_MATCH_OPTS
- tristate '"hbh" hop-by-hop and "dst" opts header match support'
+config IP6_NF_MATCH_EUI64
+ tristate '"eui64" address check'
depends on IP6_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
- This allows one to match packets based on the hop-by-hop
- and destination options headers of a packet.
+ This module performs checking on the IPv6 source address
+ Compares the last 64 bits with the EUI64 (delivered
+ from the MAC address) address
To compile it as a module, choose M here. If unsure, say N.
@@ -86,6 +86,16 @@ config IP6_NF_MATCH_FRAG
To compile it as a module, choose M here. If unsure, say N.
+config IP6_NF_MATCH_OPTS
+ tristate '"hbh" hop-by-hop and "dst" opts header match support'
+ depends on IP6_NF_IPTABLES
+ depends on NETFILTER_ADVANCED
+ help
+ This allows one to match packets based on the hop-by-hop
+ and destination options headers of a packet.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config IP6_NF_MATCH_HL
tristate '"hl" match support'
depends on IP6_NF_IPTABLES
@@ -106,15 +116,6 @@ config IP6_NF_MATCH_IPV6HEADER
To compile it as a module, choose M here. If unsure, say N.
-config IP6_NF_MATCH_AH
- tristate '"ah" match support'
- depends on IP6_NF_IPTABLES
- depends on NETFILTER_ADVANCED
- help
- This module allows one to match AH packets.
-
- To compile it as a module, choose M here. If unsure, say N.
-
config IP6_NF_MATCH_MH
tristate '"mh" match support'
depends on IP6_NF_IPTABLES
@@ -124,14 +125,13 @@ config IP6_NF_MATCH_MH
To compile it as a module, choose M here. If unsure, say N.
-config IP6_NF_MATCH_EUI64
- tristate '"eui64" address check'
+config IP6_NF_MATCH_RT
+ tristate '"rt" Routing header match support'
depends on IP6_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
- This module performs checking on the IPv6 source address
- Compares the last 64 bits with the EUI64 (delivered
- from the MAC address) address
+ rt matching allows you to match packets based on the routing
+ header of the packet.
To compile it as a module, choose M here. If unsure, say N.
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index de18bba619f2..9ad74e8bc5bd 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -340,6 +340,18 @@ config NETFILTER_XT_TARGET_CONNMARK
<file:Documentation/kbuild/modules.txt>. The module will be called
ipt_CONNMARK.ko. If unsure, say `N'.
+config NETFILTER_XT_TARGET_CONNSECMARK
+ tristate '"CONNSECMARK" target support'
+ depends on NETFILTER_XTABLES && NF_CONNTRACK && NF_CONNTRACK_SECMARK
+ default m if NETFILTER_ADVANCED=n
+ help
+ The CONNSECMARK target copies security markings from packets
+ to connections, and restores security markings from connections
+ to packets (if the packets are not already marked). This would
+ normally be used in conjunction with the SECMARK target.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config NETFILTER_XT_TARGET_DSCP
tristate '"DSCP" and "TOS" target support'
depends on NETFILTER_XTABLES
@@ -371,18 +383,6 @@ config NETFILTER_XT_TARGET_MARK
To compile it as a module, choose M here. If unsure, say N.
-config NETFILTER_XT_TARGET_NFQUEUE
- tristate '"NFQUEUE" target Support'
- depends on NETFILTER_XTABLES
- depends on NETFILTER_ADVANCED
- help
- This target replaced the old obsolete QUEUE target.
-
- As opposed to QUEUE, it supports 65535 different queues,
- not just one.
-
- To compile it as a module, choose M here. If unsure, say N.
-
config NETFILTER_XT_TARGET_NFLOG
tristate '"NFLOG" target support'
depends on NETFILTER_XTABLES
@@ -395,6 +395,18 @@ config NETFILTER_XT_TARGET_NFLOG
To compile it as a module, choose M here. If unsure, say N.
+config NETFILTER_XT_TARGET_NFQUEUE
+ tristate '"NFQUEUE" target Support'
+ depends on NETFILTER_XTABLES
+ depends on NETFILTER_ADVANCED
+ help
+ This target replaced the old obsolete QUEUE target.
+
+ As opposed to QUEUE, it supports 65535 different queues,
+ not just one.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config NETFILTER_XT_TARGET_NOTRACK
tristate '"NOTRACK" target support'
depends on NETFILTER_XTABLES
@@ -459,18 +471,6 @@ config NETFILTER_XT_TARGET_SECMARK
To compile it as a module, choose M here. If unsure, say N.
-config NETFILTER_XT_TARGET_CONNSECMARK
- tristate '"CONNSECMARK" target support'
- depends on NETFILTER_XTABLES && NF_CONNTRACK && NF_CONNTRACK_SECMARK
- default m if NETFILTER_ADVANCED=n
- help
- The CONNSECMARK target copies security markings from packets
- to connections, and restores security markings from connections
- to packets (if the packets are not already marked). This would
- normally be used in conjunction with the SECMARK target.
-
- To compile it as a module, choose M here. If unsure, say N.
-
config NETFILTER_XT_TARGET_TCPMSS
tristate '"TCPMSS" target support'
depends on NETFILTER_XTABLES && (IPV6 || IPV6=n)
@@ -607,6 +607,21 @@ config NETFILTER_XT_MATCH_ESP
To compile it as a module, choose M here. If unsure, say N.
+config NETFILTER_XT_MATCH_HASHLIMIT
+ tristate '"hashlimit" match support'
+ depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n)
+ depends on NETFILTER_ADVANCED
+ help
+ This option adds a `hashlimit' match.
+
+ As opposed to `limit', this match dynamically creates a hash table
+ of limit buckets, based on your selection of source/destination
+ addresses and/or ports.
+
+ It enables you to express policies like `10kpps for any given
+ destination address' or `500pps from any given source address'
+ with a single rule.
+
config NETFILTER_XT_MATCH_HELPER
tristate '"helper" match support'
depends on NETFILTER_XTABLES
@@ -671,6 +686,17 @@ config NETFILTER_XT_MATCH_MARK
To compile it as a module, choose M here. If unsure, say N.
+config NETFILTER_XT_MATCH_MULTIPORT
+ tristate '"multiport" Multiple port match support'
+ depends on NETFILTER_XTABLES
+ depends on NETFILTER_ADVANCED
+ help
+ Multiport matching allows you to match TCP or UDP packets based on
+ a series of source or destination ports: normally a rule can only
+ match a single range of ports.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config NETFILTER_XT_MATCH_OWNER
tristate '"owner" match support'
depends on NETFILTER_XTABLES
@@ -691,17 +717,6 @@ config NETFILTER_XT_MATCH_POLICY
To compile it as a module, choose M here. If unsure, say N.
-config NETFILTER_XT_MATCH_MULTIPORT
- tristate '"multiport" Multiple port match support'
- depends on NETFILTER_XTABLES
- depends on NETFILTER_ADVANCED
- help
- Multiport matching allows you to match TCP or UDP packets based on
- a series of source or destination ports: normally a rule can only
- match a single range of ports.
-
- To compile it as a module, choose M here. If unsure, say N.
-
config NETFILTER_XT_MATCH_PHYSDEV
tristate '"physdev" match support'
depends on NETFILTER_XTABLES && BRIDGE && BRIDGE_NETFILTER
@@ -884,20 +899,5 @@ config NETFILTER_XT_MATCH_U32
Details and examples are in the kernel module source.
-config NETFILTER_XT_MATCH_HASHLIMIT
- tristate '"hashlimit" match support'
- depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n)
- depends on NETFILTER_ADVANCED
- help
- This option adds a `hashlimit' match.
-
- As opposed to `limit', this match dynamically creates a hash table
- of limit buckets, based on your selection of source/destination
- addresses and/or ports.
-
- It enables you to express policies like `10kpps for any given
- destination address' or `500pps from any given source address'
- with a single rule.
-
endmenu