summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/s390/Kconfig49
-rw-r--r--drivers/block/Kconfig4
-rw-r--r--drivers/char/Kconfig2
-rw-r--r--drivers/crypto/Kconfig22
-rw-r--r--drivers/s390/block/Kconfig11
-rw-r--r--drivers/s390/char/Kconfig (renamed from drivers/s390/Kconfig)111
-rw-r--r--drivers/s390/net/Kconfig8
-rw-r--r--include/asm-s390/param.h2
8 files changed, 70 insertions, 139 deletions
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1a84719be264..098c62c29f9c 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -4,27 +4,23 @@
#
config MMU
- bool
- default y
+ def_bool y
config ZONE_DMA
def_bool y
depends on 64BIT
config LOCKDEP_SUPPORT
- bool
- default y
+ def_bool y
config STACKTRACE_SUPPORT
- bool
- default y
+ def_bool y
config RWSEM_GENERIC_SPINLOCK
bool
config RWSEM_XCHGADD_ALGORITHM
- bool
- default y
+ def_bool y
config ARCH_HAS_ILOG2_U32
bool
@@ -35,8 +31,7 @@ config ARCH_HAS_ILOG2_U64
default n
config GENERIC_HWEIGHT
- bool
- default y
+ def_bool y
config GENERIC_TIME
def_bool y
@@ -55,8 +50,7 @@ config NO_DMA
mainmenu "Linux Kernel Configuration"
config S390
- bool
- default y
+ def_bool y
source "init/Kconfig"
@@ -280,6 +274,10 @@ config WARN_STACK_SIZE
config ARCH_POPULATES_NODE_MAP
def_bool y
+comment "Kernel preemption"
+
+source "kernel/Kconfig.preempt"
+
source "mm/Kconfig"
config HOLES_IN_ZONE
@@ -320,17 +318,6 @@ config QDIO_DEBUG
comment "Misc"
-config PREEMPT
- bool "Preemptible Kernel"
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
-
- Say N if you are unsure.
-
config IPL
bool "Builtin IPL record support"
help
@@ -488,6 +475,8 @@ config APPLDATA_NET_SUM
This can also be compiled as a module, which will be called
appldata_net_sum.o.
+source kernel/Kconfig.hz
+
config NO_IDLE_HZ
bool "No HZ timer ticks in idle"
help
@@ -535,18 +524,12 @@ endmenu
source "net/Kconfig"
config PCMCIA
- bool
- default n
-
-source "drivers/base/Kconfig"
+ def_bool n
-source "drivers/connector/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/s390/Kconfig"
+config CCW
+ def_bool y
-source "drivers/net/Kconfig"
+source "drivers/Kconfig"
source "fs/Kconfig"
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 17ee97f3a99b..b4c8319138b2 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -444,8 +444,6 @@ config CDROM_PKTCDVD_WCACHE
this option is dangerous unless the CD-RW media is known good, as we
don't do deferred write error handling yet.
-source "drivers/s390/block/Kconfig"
-
config ATA_OVER_ETH
tristate "ATA over Ethernet support"
depends on NET
@@ -453,6 +451,8 @@ config ATA_OVER_ETH
This driver provides Support for ATA over Ethernet block
devices like the Coraid EtherDrive (R) Storage Blade.
+source "drivers/s390/block/Kconfig"
+
endmenu
endif
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 7ff85ad62806..abcafac64738 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1081,5 +1081,7 @@ config DEVPORT
depends on ISA || PCI
default y
+source "drivers/s390/char/Kconfig"
+
endmenu
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index f4c634504d1a..e678a33ea672 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -56,4 +56,26 @@ config CRYPTO_DEV_GEODE
To compile this driver as a module, choose M here: the module
will be called geode-aes.
+config ZCRYPT
+ tristate "Support for PCI-attached cryptographic adapters"
+ depends on S390
+ select ZCRYPT_MONOLITHIC if ZCRYPT="y"
+ default "m"
+ help
+ Select this option if you want to use a PCI-attached cryptographic
+ adapter like:
+ + PCI Cryptographic Accelerator (PCICA)
+ + PCI Cryptographic Coprocessor (PCICC)
+ + PCI-X Cryptographic Coprocessor (PCIXCC)
+ + Crypto Express2 Coprocessor (CEX2C)
+ + Crypto Express2 Accelerator (CEX2A)
+
+config ZCRYPT_MONOLITHIC
+ bool "Monolithic zcrypt module"
+ depends on ZCRYPT="m"
+ help
+ Select this option if you want to have a single module z90crypt.ko
+ that contains all parts of the crypto device driver (ap bus,
+ request router and all the card drivers).
+
endmenu
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index b250c5354503..e879b212cf43 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -1,11 +1,9 @@
-if S390 && BLOCK
-
comment "S/390 block device drivers"
- depends on S390
+ depends on S390 && BLOCK
config BLK_DEV_XPRAM
tristate "XPRAM disk support"
- depends on S390
+ depends on S390 && BLOCK
help
Select this option if you want to use your expanded storage on S/390
or zSeries as a disk. This is useful as a _fast_ swap device if you
@@ -15,12 +13,13 @@ config BLK_DEV_XPRAM
config DCSSBLK
tristate "DCSSBLK support"
+ depends on S390 && BLOCK
help
Support for dcss block device
config DASD
tristate "Support for DASD devices"
- depends on CCW
+ depends on CCW && BLOCK
help
Enable this option if you want to access DASDs directly utilizing
S/390s channel subsystem commands. This is necessary for running
@@ -62,5 +61,3 @@ config DASD_EER
This driver provides a character device interface to the
DASD extended error reporting. This is only needed if you want to
use applications written for the EER facility.
-
-endif
diff --git a/drivers/s390/Kconfig b/drivers/s390/char/Kconfig
index 165af398fdea..66102a184322 100644
--- a/drivers/s390/Kconfig
+++ b/drivers/s390/char/Kconfig
@@ -1,69 +1,9 @@
-config CCW
- bool
- default y
-
-source "drivers/block/Kconfig"
-
-source "drivers/md/Kconfig"
-
-
-menu "Character device drivers"
-
-config UNIX98_PTYS
- bool "Unix98 PTY support"
- ---help---
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- The entries in /dev/pts/ are created on the fly by a virtual
- file system; therefore, if you say Y here you should say Y to
- "/dev/pts file system for Unix98 PTYs" as well.
-
- If you want to say Y here, you need to have the C library glibc 2.1
- or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
- Read the instructions in <file:Documentation/Changes> pertaining to
- pseudo terminals. It's safe to say N.
-
-config UNIX98_PTY_COUNT
- int "Maximum number of Unix98 PTYs in use (0-2048)"
- depends on UNIX98_PTYS
- default "256"
- help
- The maximum number of Unix98 PTYs that can be used at any one time.
- The default is 256, and should be enough for desktop systems. Server
- machines which support incoming telnet/rlogin/ssh connections and/or
- serve several X terminals may want to increase this: every incoming
- connection and every xterm uses up one PTY.
-
- When not in use, each additional set of 256 PTYs occupy
- approximately 8 KB of kernel memory on 32-bit architectures.
-
-config HANGCHECK_TIMER
- tristate "Hangcheck timer"
- help
- The hangcheck-timer module detects when the system has gone
- out to lunch past a certain margin. It can reboot the system
- or merely print a warning.
-
-source "drivers/char/watchdog/Kconfig"
-
comment "S/390 character device drivers"
+ depends on S390
config TN3270
tristate "Support for locally attached 3270 terminals"
+ depends on CCW
help
Include support for IBM 3270 terminals.
@@ -88,6 +28,7 @@ config TN3270_CONSOLE
config TN3215
bool "Support for 3215 line mode terminal"
+ depends on CCW
help
Include support for IBM 3215 line-mode terminals.
@@ -99,12 +40,19 @@ config TN3215_CONSOLE
Linux system console.
config CCW_CONSOLE
- bool
- depends on TN3215_CONSOLE || TN3270_CONSOLE
- default y
-
+ bool
+ depends on TN3215_CONSOLE || TN3270_CONSOLE
+ default y
+
+config SCLP
+ bool "Support for SCLP"
+ depends on S390
+ help
+ Include support for the SCLP interface to the service element.
+
config SCLP_TTY
bool "Support for SCLP line mode terminal"
+ depends on SCLP
help
Include support for IBM SCLP line-mode terminals.
@@ -117,6 +65,7 @@ config SCLP_CONSOLE
config SCLP_VT220_TTY
bool "Support for SCLP VT220-compatible terminal"
+ depends on SCLP
help
Include support for an IBM SCLP VT220-compatible terminal.
@@ -129,6 +78,7 @@ config SCLP_VT220_CONSOLE
config SCLP_CPI
tristate "Control-Program Identification"
+ depends on SCLP
help
This option enables the hardware console interface for system
identification. This is commonly used for workload management and
@@ -140,6 +90,7 @@ config SCLP_CPI
config S390_TAPE
tristate "S/390 tape device support"
+ depends on CCW
help
Select this option if you want to access channel-attached tape
devices on IBM S/390 or zSeries.
@@ -194,6 +145,7 @@ config VMLOGRDR
config VMCP
tristate "Support for the z/VM CP interface (VM only)"
+ depends on S390
help
Select this option if you want to be able to interact with the control
program on z/VM
@@ -207,33 +159,8 @@ config MONREADER
config MONWRITER
tristate "API for writing z/VM monitor service records"
+ depends on S390
default "m"
help
Character device driver for writing z/VM monitor service records
-endmenu
-
-menu "Cryptographic devices"
-
-config ZCRYPT
- tristate "Support for PCI-attached cryptographic adapters"
- select ZCRYPT_MONOLITHIC if ZCRYPT="y"
- default "m"
- help
- Select this option if you want to use a PCI-attached cryptographic
- adapter like:
- + PCI Cryptographic Accelerator (PCICA)
- + PCI Cryptographic Coprocessor (PCICC)
- + PCI-X Cryptographic Coprocessor (PCIXCC)
- + Crypto Express2 Coprocessor (CEX2C)
- + Crypto Express2 Accelerator (CEX2A)
-
-config ZCRYPT_MONOLITHIC
- bool "Monolithic zcrypt module"
- depends on ZCRYPT="m"
- help
- Select this option if you want to have a single module z90crypt.ko
- that contains all parts of the crypto device driver (ap bus,
- request router and all the card drivers).
-
-endmenu
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index f98fa465df0a..eada69dec4fe 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -3,7 +3,7 @@ menu "S/390 network device drivers"
config LCS
tristate "Lan Channel Station Interface"
- depends on NETDEVICES && (NET_ETHERNET || TR || FDDI)
+ depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
help
Select this option if you want to use LCS networking on IBM S/390
or zSeries. This device driver supports Token Ring (IEEE 802.5),
@@ -13,7 +13,7 @@ config LCS
config CTC
tristate "CTC device support"
- depends on NETDEVICES
+ depends on CCW && NETDEVICES
help
Select this option if you want to use channel-to-channel networking
on IBM S/390 or zSeries. This device driver supports real CTC
@@ -42,7 +42,7 @@ config SMSGIUCV
config CLAW
tristate "CLAW device support"
- depends on NETDEVICES
+ depends on CCW && NETDEVICES
help
This driver supports channel attached CLAW devices.
CLAW is Common Link Access for Workstation. Common devices
@@ -52,7 +52,7 @@ config CLAW
config QETH
tristate "Gigabit Ethernet device support"
- depends on NETDEVICES && IP_MULTICAST && QDIO
+ depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
help
This driver supports the IBM S/390 and zSeries OSA Express adapters
in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN
diff --git a/include/asm-s390/param.h b/include/asm-s390/param.h
index 085a7e229b23..34aaa4603347 100644
--- a/include/asm-s390/param.h
+++ b/include/asm-s390/param.h
@@ -10,7 +10,7 @@
#define _ASMS390_PARAM_H
#ifdef __KERNEL__
-# define HZ 100 /* Internal kernel timer frequency */
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif