summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/video/fbdev/Kconfig33
-rw-r--r--drivers/video/fbdev/Makefile3
-rw-r--r--drivers/video/fbdev/auo_k1900fb.c204
-rw-r--r--drivers/video/fbdev/auo_k1901fb.c257
-rw-r--r--drivers/video/fbdev/auo_k190x.c1190
-rw-r--r--drivers/video/fbdev/auo_k190x.h129
-rw-r--r--include/video/auo_k190xfb.h107
7 files changed, 0 insertions, 1923 deletions
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 434e95b9320e..381a9c588792 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2253,39 +2253,6 @@ config FB_BROADSHEET
and could also have been called by other names when coupled with
a bridge adapter.
-config FB_AUO_K190X
- tristate "AUO-K190X EPD controller support"
- depends on FB
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- help
- Provides support for epaper controllers from the K190X series
- of AUO. These controllers can be used to drive epaper displays
- from Sipix.
-
- This option enables the common support, shared by the individual
- controller drivers. You will also have to enable the driver
- for the controller type used in your device.
-
-config FB_AUO_K1900
- tristate "AUO-K1900 EPD controller support"
- depends on FB && FB_AUO_K190X
- help
- This driver implements support for the AUO K1900 epd-controller.
- This controller can drive Sipix epaper displays but can only do
- serial updates, reducing the number of possible frames per second.
-
-config FB_AUO_K1901
- tristate "AUO-K1901 EPD controller support"
- depends on FB && FB_AUO_K190X
- help
- This driver implements support for the AUO K1901 epd-controller.
- This controller can drive Sipix epaper displays and supports
- concurrent updates, making higher frames per second possible.
-
config FB_JZ4740
tristate "JZ4740 LCD framebuffer support"
depends on FB && MACH_JZ4740
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 55282a21b500..317a6fd0e54e 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -100,9 +100,6 @@ obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
-obj-$(CONFIG_FB_AUO_K190X) += auo_k190x.o
-obj-$(CONFIG_FB_AUO_K1900) += auo_k1900fb.o
-obj-$(CONFIG_FB_AUO_K1901) += auo_k1901fb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
diff --git a/drivers/video/fbdev/auo_k1900fb.c b/drivers/video/fbdev/auo_k1900fb.c
deleted file mode 100644
index 7637c60eae3d..000000000000
--- a/drivers/video/fbdev/auo_k1900fb.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * auok190xfb.c -- FB driver for AUO-K1900 controllers
- *
- * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
- *
- * based on broadsheetfb.c
- *
- * Copyright (C) 2008, Jaya Kumar
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
- *
- * This driver is written to be used with the AUO-K1900 display controller.
- *
- * It is intended to be architecture independent. A board specific driver
- * must be used to perform all the physical IO interactions.
- *
- * The controller supports different update modes:
- * mode0+1 16 step gray (4bit)
- * mode2 4 step gray (2bit) - FIXME: add strange refresh
- * mode3 2 step gray (1bit) - FIXME: add strange refresh
- * mode4 handwriting mode (strange behaviour)
- * mode5 automatic selection of update mode
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/list.h>
-#include <linux/firmware.h>
-#include <linux/gpio.h>
-#include <linux/pm_runtime.h>
-
-#include <video/auo_k190xfb.h>
-
-#include "auo_k190x.h"
-
-/*
- * AUO-K1900 specific commands
- */
-
-#define AUOK1900_CMD_PARTIALDISP 0x1001
-#define AUOK1900_CMD_ROTATION 0x1006
-#define AUOK1900_CMD_LUT_STOP 0x1009
-
-#define AUOK1900_INIT_TEMP_AVERAGE (1 << 13)
-#define AUOK1900_INIT_ROTATE(_x) ((_x & 0x3) << 10)
-#define AUOK1900_INIT_RESOLUTION(_res) ((_res & 0x7) << 2)
-
-static void auok1900_init(struct auok190xfb_par *par)
-{
- struct device *dev = par->info->device;
- struct auok190x_board *board = par->board;
- u16 init_param = 0;
-
- pm_runtime_get_sync(dev);
-
- init_param |= AUOK1900_INIT_TEMP_AVERAGE;
- init_param |= AUOK1900_INIT_ROTATE(par->rotation);
- init_param |= AUOK190X_INIT_INVERSE_WHITE;
- init_param |= AUOK190X_INIT_FORMAT0;
- init_param |= AUOK1900_INIT_RESOLUTION(par->resolution);
- init_param |= AUOK190X_INIT_SHIFT_RIGHT;
-
- auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);
-
- /* let the controller finish */
- board->wait_for_rdy(par);
-
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
-}
-
-static void auok1900_update_region(struct auok190xfb_par *par, int mode,
- u16 y1, u16 y2)
-{
- struct device *dev = par->info->device;
- unsigned char *buf = (unsigned char *)par->info->screen_base;
- int xres = par->info->var.xres;
- int line_length = par->info->fix.line_length;
- u16 args[4];
-
- pm_runtime_get_sync(dev);
-
- mutex_lock(&(par->io_lock));
-
- /* y1 and y2 must be a multiple of 2 so drop the lowest bit */
- y1 &= 0xfffe;
- y2 &= 0xfffe;
-
- dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
- 1, y1+1, xres, y2-y1, mode);
-
- /* to FIX handle different partial update modes */
- args[0] = mode | 1;
- args[1] = y1 + 1;
- args[2] = xres;
- args[3] = y2 - y1;
- buf += y1 * line_length;
- auok190x_send_cmdargs_pixels(par, AUOK1900_CMD_PARTIALDISP, 4, args,
- ((y2 - y1) * line_length)/2, (u16 *) buf);
- auok190x_send_command(par, AUOK190X_CMD_DATA_STOP);
-
- par->update_cnt++;
-
- mutex_unlock(&(par->io_lock));
-
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
-}
-
-static void auok1900fb_dpy_update_pages(struct auok190xfb_par *par,
- u16 y1, u16 y2)
-{
- int mode;
-
- if (par->update_mode < 0) {
- mode = AUOK190X_UPDATE_MODE(1);
- par->last_mode = -1;
- } else {
- mode = AUOK190X_UPDATE_MODE(par->update_mode);
- par->last_mode = par->update_mode;
- }
-
- if (par->flash)
- mode |= AUOK190X_UPDATE_NONFLASH;
-
- auok1900_update_region(par, mode, y1, y2);
-}
-
-static void auok1900fb_dpy_update(struct auok190xfb_par *par)
-{
- int mode;
-
- if (par->update_mode < 0) {
- mode = AUOK190X_UPDATE_MODE(0);
- par->last_mode = -1;
- } else {
- mode = AUOK190X_UPDATE_MODE(par->update_mode);
- par->last_mode = par->update_mode;
- }
-
- if (par->flash)
- mode |= AUOK190X_UPDATE_NONFLASH;
-
- auok1900_update_region(par, mode, 0, par->info->var.yres);
- par->update_cnt = 0;
-}
-
-static bool auok1900fb_need_refresh(struct auok190xfb_par *par)
-{
- return (par->update_cnt > 10);
-}
-
-static int auok1900fb_probe(struct platform_device *pdev)
-{
- struct auok190x_init_data init;
- struct auok190x_board *board;
-
- /* pick up board specific routines */
- board = pdev->dev.platform_data;
- if (!board)
- return -EINVAL;
-
- /* fill temporary init struct for common init */
- init.id = "auo_k1900fb";
- init.board = board;
- init.update_partial = auok1900fb_dpy_update_pages;
- init.update_all = auok1900fb_dpy_update;
- init.need_refresh = auok1900fb_need_refresh;
- init.init = auok1900_init;
-
- return auok190x_common_probe(pdev, &init);
-}
-
-static int auok1900fb_remove(struct platform_device *pdev)
-{
- return auok190x_common_remove(pdev);
-}
-
-static struct platform_driver auok1900fb_driver = {
- .probe = auok1900fb_probe,
- .remove = auok1900fb_remove,
- .driver = {
- .name = "auo_k1900fb",
- .pm = &auok190x_pm,
- },
-};
-module_platform_driver(auok1900fb_driver);
-
-MODULE_DESCRIPTION("framebuffer driver for the AUO-K1900 EPD controller");
-MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/auo_k1901fb.c b/drivers/video/fbdev/auo_k1901fb.c
deleted file mode 100644
index 681fe61957b6..000000000000
--- a/drivers/video/fbdev/auo_k1901fb.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * auok190xfb.c -- FB driver for AUO-K1901 controllers
- *
- * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
- *
- * based on broadsheetfb.c
- *
- * Copyright (C) 2008, Jaya Kumar
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
- *
- * This driver is written to be used with the AUO-K1901 display controller.
- *
- * It is intended to be architecture independent. A board specific driver
- * must be used to perform all the physical IO interactions.
- *
- * The controller supports different update modes:
- * mode0+1 16 step gray (4bit)
- * mode2+3 4 step gray (2bit)
- * mode4+5 2 step gray (1bit)
- * - mode4 is described as "without LUT"
- * mode7 automatic selection of update mode
- *
- * The most interesting difference to the K1900 is the ability to do screen
- * updates in an asynchronous fashion. Where the K1900 needs to wait for the
- * current update to complete, the K1901 can process later updates already.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/list.h>
-#include <linux/firmware.h>
-#include <linux/gpio.h>
-#include <linux/pm_runtime.h>
-
-#include <video/auo_k190xfb.h>
-
-#include "auo_k190x.h"
-
-/*
- * AUO-K1901 specific commands
- */
-
-#define AUOK1901_CMD_LUT_INTERFACE 0x0005
-#define AUOK1901_CMD_DMA_START 0x1001
-#define AUOK1901_CMD_CURSOR_START 0x1007
-#define AUOK1901_CMD_CURSOR_STOP AUOK190X_CMD_DATA_STOP
-#define AUOK1901_CMD_DDMA_START 0x1009
-
-#define AUOK1901_INIT_GATE_PULSE_LOW (0 << 14)
-#define AUOK1901_INIT_GATE_PULSE_HIGH (1 << 14)
-#define AUOK1901_INIT_SINGLE_GATE (0 << 13)
-#define AUOK1901_INIT_DOUBLE_GATE (1 << 13)
-
-/* Bits to pixels
- * Mode 15-12 11-8 7-4 3-0
- * format2 2 T 1 T
- * format3 1 T 2 T
- * format4 T 2 T 1
- * format5 T 1 T 2
- *
- * halftone modes:
- * format6 2 2 1 1
- * format7 1 1 2 2
- */
-#define AUOK1901_INIT_FORMAT2 (1 << 7)
-#define AUOK1901_INIT_FORMAT3 ((1 << 7) | (1 << 6))
-#define AUOK1901_INIT_FORMAT4 (1 << 8)
-#define AUOK1901_INIT_FORMAT5 ((1 << 8) | (1 << 6))
-#define AUOK1901_INIT_FORMAT6 ((1 << 8) | (1 << 7))
-#define AUOK1901_INIT_FORMAT7 ((1 << 8) | (1 << 7) | (1 << 6))
-
-/* res[4] to bit 10
- * res[3-0] to bits 5-2
- */
-#define AUOK1901_INIT_RESOLUTION(_res) (((_res & (1 << 4)) << 6) \
- | ((_res & 0xf) << 2))
-
-/*
- * portrait / landscape orientation in AUOK1901_CMD_DMA_START
- */
-#define AUOK1901_DMA_ROTATE90(_rot) ((_rot & 1) << 13)
-
-/*
- * equivalent to 1 << 11, needs the ~ to have same rotation like K1900
- */
-#define AUOK1901_DDMA_ROTATE180(_rot) ((~_rot & 2) << 10)
-
-static void auok1901_init(struct auok190xfb_par *par)
-{
- struct device *dev = par->info->device;
- struct auok190x_board *board = par->board;
- u16 init_param = 0;
-
- pm_runtime_get_sync(dev);
-
- init_param |= AUOK190X_INIT_INVERSE_WHITE;
- init_param |= AUOK190X_INIT_FORMAT0;
- init_param |= AUOK1901_INIT_RESOLUTION(par->resolution);
- init_param |= AUOK190X_INIT_SHIFT_LEFT;
-
- auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);
-
- /* let the controller finish */
- board->wait_for_rdy(par);
-
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
-}
-
-static void auok1901_update_region(struct auok190xfb_par *par, int mode,
- u16 y1, u16 y2)
-{
- struct device *dev = par->info->device;
- unsigned char *buf = (unsigned char *)par->info->screen_base;
- int xres = par->info->var.xres;
- int line_length = par->info->fix.line_length;
- u16 args[5];
-
- pm_runtime_get_sync(dev);
-
- mutex_lock(&(par->io_lock));
-
- /* y1 and y2 must be a multiple of 2 so drop the lowest bit */
- y1 &= 0xfffe;
- y2 &= 0xfffe;
-
- dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
- 1, y1+1, xres, y2-y1, mode);
-
- /* K1901: first transfer the region data */
- args[0] = AUOK1901_DMA_ROTATE90(par->rotation) | 1;
- args[1] = y1 + 1;
- args[2] = xres;
- args[3] = y2 - y1;
- buf += y1 * line_length;
- auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4,
- args, ((y2 - y1) * line_length)/2,
- (u16 *) buf);
- auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP);
-
- /* K1901: second tell the controller to update the region with mode */
- args[0] = mode | AUOK1901_DDMA_ROTATE180(par->rotation);
- args[1] = 1;
- args[2] = y1 + 1;
- args[3] = xres;
- args[4] = y2 - y1;
- auok190x_send_cmdargs_nowait(par, AUOK1901_CMD_DDMA_START, 5, args);
-
- par->update_cnt++;
-
- mutex_unlock(&(par->io_lock));
-
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
-}
-
-static void auok1901fb_dpy_update_pages(struct auok190xfb_par *par,
- u16 y1, u16 y2)
-{
- int mode;
-
- if (par->update_mode < 0) {
- mode = AUOK190X_UPDATE_MODE(1);
- par->last_mode = -1;
- } else {
- mode = AUOK190X_UPDATE_MODE(par->update_mode);
- par->last_mode = par->update_mode;
- }
-
- if (par->flash)
- mode |= AUOK190X_UPDATE_NONFLASH;
-
- auok1901_update_region(par, mode, y1, y2);
-}
-
-static void auok1901fb_dpy_update(struct auok190xfb_par *par)
-{
- int mode;
-
- /* When doing full updates, wait for the controller to be ready
- * This will hopefully catch some hangs of the K1901
- */
- par->board->wait_for_rdy(par);
-
- if (par->update_mode < 0) {
- mode = AUOK190X_UPDATE_MODE(0);
- par->last_mode = -1;
- } else {
- mode = AUOK190X_UPDATE_MODE(par->update_mode);
- par->last_mode = par->update_mode;
- }
-
- if (par->flash)
- mode |= AUOK190X_UPDATE_NONFLASH;
-
- auok1901_update_region(par, mode, 0, par->info->var.yres);
- par->update_cnt = 0;
-}
-
-static bool auok1901fb_need_refresh(struct auok190xfb_par *par)
-{
- return (par->update_cnt > 10);
-}
-
-static int auok1901fb_probe(struct platform_device *pdev)
-{
- struct auok190x_init_data init;
- struct auok190x_board *board;
-
- /* pick up board specific routines */
- board = pdev->dev.platform_data;
- if (!board)
- return -EINVAL;
-
- /* fill temporary init struct for common init */
- init.id = "auo_k1901fb";
- init.board = board;
- init.update_partial = auok1901fb_dpy_update_pages;
- init.update_all = auok1901fb_dpy_update;
- init.need_refresh = auok1901fb_need_refresh;
- init.init = auok1901_init;
-
- return auok190x_common_probe(pdev, &init);
-}
-
-static int auok1901fb_remove(struct platform_device *pdev)
-{
- return auok190x_common_remove(pdev);
-}
-
-static struct platform_driver auok1901fb_driver = {
- .probe = auok1901fb_probe,
- .remove = auok1901fb_remove,
- .driver = {
- .name = "auo_k1901fb",
- .pm = &auok190x_pm,
- },
-};
-module_platform_driver(auok1901fb_driver);
-
-MODULE_DESCRIPTION("framebuffer driver for the AUO-K1901 EPD controller");
-MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/auo_k190x.c b/drivers/video/fbdev/auo_k190x.c
deleted file mode 100644
index b39681e6f4fd..000000000000
--- a/drivers/video/fbdev/auo_k190x.c
+++ /dev/null
@@ -1,1190 +0,0 @@
-/*
- * Common code for AUO-K190X framebuffer drivers
- *
- * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/sched/mm.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/uaccess.h>
-#include <linux/vmalloc.h>
-#include <linux/regulator/consumer.h>
-
-#include <video/auo_k190xfb.h>
-
-#include "auo_k190x.h"
-
-struct panel_info {
- int w;
- int h;
-};
-
-/* table of panel specific parameters to be indexed into by the board drivers */
-static struct panel_info panel_table[] = {
- /* standard 6" */
- [AUOK190X_RESOLUTION_800_600] = {
- .w = 800,
- .h = 600,
- },
- /* standard 9" */
- [AUOK190X_RESOLUTION_1024_768] = {
- .w = 1024,
- .h = 768,
- },
- [AUOK190X_RESOLUTION_600_800] = {
- .w = 600,
- .h = 800,
- },
- [AUOK190X_RESOLUTION_768_1024] = {
- .w = 768,
- .h = 1024,
- },
-};
-
-/*
- * private I80 interface to the board driver
- */
-
-static void auok190x_issue_data(struct auok190xfb_par *par, u16 data)
-{
- par->board->set_ctl(par, AUOK190X_I80_WR, 0);
- par->board->set_hdb(par, data);
- par->board->set_ctl(par, AUOK190X_I80_WR, 1);
-}
-
-static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data)
-{
- par->board->set_ctl(par, AUOK190X_I80_DC, 0);
- auok190x_issue_data(par, data);
- par->board->set_ctl(par, AUOK190X_I80_DC, 1);
-}
-
-/**
- * Conversion of 16bit color to 4bit grayscale
- * does roughly (0.3 * R + 0.6 G + 0.1 B) / 2
- */
-static inline int rgb565_to_gray4(u16 data, struct fb_var_screeninfo *var)
-{
- return ((((data & 0xF800) >> var->red.offset) * 77 +
- ((data & 0x07E0) >> (var->green.offset + 1)) * 151 +
- ((data & 0x1F) >> var->blue.offset) * 28) >> 8 >> 1);
-}
-
-static int auok190x_issue_pixels_rgb565(struct auok190xfb_par *par, int size,
- u16 *data)
-{
- struct fb_var_screeninfo *var = &par->info->var;
- struct device *dev = par->info->device;
- int i;
- u16 tmp;
-
- if (size & 7) {
- dev_err(dev, "issue_pixels: size %d must be a multiple of 8\n",
- size);
- return -EINVAL;
- }
-
- for (i = 0; i < (size >> 2); i++) {
- par->board->set_ctl(par, AUOK190X_I80_WR, 0);
-
- tmp = (rgb565_to_gray4(data[4*i], var) & 0x000F);
- tmp |= (rgb565_to_gray4(data[4*i+1], var) << 4) & 0x00F0;
- tmp |= (rgb565_to_gray4(data[4*i+2], var) << 8) & 0x0F00;
- tmp |= (rgb565_to_gray4(data[4*i+3], var) << 12) & 0xF000;
-
- par->board->set_hdb(par, tmp);
- par->board->set_ctl(par, AUOK190X_I80_WR, 1);
- }
-
- return 0;
-}
-
-static int auok190x_issue_pixels_gray8(struct auok190xfb_par *par, int size,
- u16 *data)
-{
- struct device *dev = par->info->device;
- int i;
- u16 tmp;
-
- if (size & 3) {
- dev_err(dev, "issue_pixels: size %d must be a multiple of 4\n",
- size);
- return -EINVAL;
- }
-
- for (i = 0; i < (size >> 1); i++) {
- par->board->set_ctl(par, AUOK190X_I80_WR, 0);
-
- /* simple reduction of 8bit staticgray to 4bit gray
- * combines 4 * 4bit pixel values into a 16bit value
- */
- tmp = (data[2*i] & 0xF0) >> 4;
- tmp |= (data[2*i] & 0xF000) >> 8;
- tmp |= (data[2*i+1] & 0xF0) << 4;
- tmp |= (data[2*i+1] & 0xF000);
-
- par->board->set_hdb(par, tmp);
- par->board->set_ctl(par, AUOK190X_I80_WR, 1);
- }
-
- return 0;
-}
-
-static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
- u16 *data)
-{
- struct fb_info *info = par->info;
- struct device *dev = par->info->device;
-
- if (info->var.bits_per_pixel == 8 && info->var.grayscale)
- auok190x_issue_pixels_gray8(par, size, data);
- else if (info->var.bits_per_pixel == 16)
- auok190x_issue_pixels_rgb565(par, size, data);
- else
- dev_err(dev, "unsupported color mode (bits: %d, gray: %d)\n",
- info->var.bits_per_pixel, info->var.grayscale);
-
- return 0;
-}
-
-static u16 auok190x_read_data(struct auok190xfb_par *par)
-{
- u16 data;
-
- par->board->set_ctl(par, AUOK190X_I80_OE, 0);
- data = par->board->get_hdb(par);
- par->board->set_ctl(par, AUOK190X_I80_OE, 1);
-
- return data;
-}
-
-/*
- * Command interface for the controller drivers
- */
-
-void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data)
-{
- par->board->set_ctl(par, AUOK190X_I80_CS, 0);
- auok190x_issue_cmd(par, data);
- par->board->set_ctl(par, AUOK190X_I80_CS, 1);
-}
-EXPORT_SYMBOL_GPL(auok190x_send_command_nowait);
-
-void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd,
- int argc, u16 *argv)
-{
- int i;
-
- par->board->set_ctl(par, AUOK190X_I80_CS, 0);
- auok190x_issue_cmd(par, cmd);
-
- for (i = 0; i < argc; i++)
- auok190x_issue_data(par, argv[i]);
- par->board->set_ctl(par, AUOK190X_I80_CS, 1);
-}
-EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_nowait);
-
-int auok190x_send_command(struct auok190xfb_par *par, u16 data)
-{
- int ret;
-
- ret = par->board->wait_for_rdy(par);
- if (ret)
- return ret;
-
- auok190x_send_command_nowait(par, data);
- return 0;
-}
-EXPORT_SYMBOL_GPL(auok190x_send_command);
-
-int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd,
- int argc, u16 *argv)
-{
- int ret;
-
- ret = par->board->wait_for_rdy(par);
- if (ret)
- return ret;
-
- auok190x_send_cmdargs_nowait(par, cmd, argc, argv);
- return 0;
-}
-EXPORT_SYMBOL_GPL(auok190x_send_cmdargs);
-
-int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd,
- int argc, u16 *argv)
-{
- int i, ret;
-
- ret = par->board->wait_for_rdy(par);
- if (ret)
- return ret;
-
- par->board->set_ctl(par, AUOK190X_I80_CS, 0);
- auok190x_issue_cmd(par, cmd);
-
- for (i = 0; i < argc; i++)
- argv[i] = auok190x_read_data(par);
- par->board->set_ctl(par, AUOK190X_I80_CS, 1);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(auok190x_read_cmdargs);
-
-void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par, u16 cmd,
- int argc, u16 *argv, int size, u16 *data)
-{
- int i;
-
- par->board->set_ctl(par, AUOK190X_I80_CS, 0);
-
- auok190x_issue_cmd(par, cmd);
-
- for (i = 0; i < argc; i++)
- auok190x_issue_data(par, argv[i]);
-
- auok190x_issue_pixels(par, size, data);
-
- par->board->set_ctl(par, AUOK190X_I80_CS, 1);
-}
-EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels_nowait);
-
-int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd,
- int argc, u16 *argv, int size, u16 *data)
-{
- int ret;
-
- ret = par->board->wait_for_rdy(par);
- if (ret)
- return ret;
-
- auok190x_send_cmdargs_pixels_nowait(par, cmd, argc, argv, size, data);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels);
-
-/*
- * fbdefio callbacks - common on both controllers.
- */
-
-static void auok190xfb_dpy_first_io(struct fb_info *info)
-{
- /* tell runtime-pm that we wish to use the device in a short time */
- pm_runtime_get(info->device);
-}
-
-/* this is called back from the deferred io workqueue */
-static void auok190xfb_dpy_deferred_io(struct fb_info *info,
- struct list_head *pagelist)
-{
- struct fb_deferred_io *fbdefio = info->fbdefio;
- struct auok190xfb_par *par = info->par;
- u16 line_length = info->fix.line_length;
- u16 yres = info->var.yres;
- u16 y1 = 0, h = 0;
- int prev_index = -1;
- struct page *cur;
- int h_inc;
- int threshold;
-
- if (!list_empty(pagelist))
- /* the device resume should've been requested through first_io,
- * if the resume did not finish until now, wait for it.
- */
- pm_runtime_barrier(info->device);
- else
- /* We reached this via the fsync or some other way.
- * In either case the first_io function did not run,
- * so we runtime_resume the device here synchronously.
- */
- pm_runtime_get_sync(info->device);
-
- /* Do a full screen update every n updates to prevent
- * excessive darkening of the Sipix display.
- * If we do this, there is no need to walk the pages.
- */
- if (par->need_refresh(par)) {
- par->update_all(par);
- goto out;
- }
-
- /* height increment is fixed per page */
- h_inc = DIV_ROUND_UP(PAGE_SIZE , line_length);
-
- /* calculate number of pages from pixel height */
- threshold = par->consecutive_threshold / h_inc;
- if (threshold < 1)
- threshold = 1;
-
- /* walk the written page list and swizzle the data */
- list_for_each_entry(cur, &fbdefio->pagelist, lru) {
- if (prev_index < 0) {
- /* just starting so assign first page */
- y1 = (cur->index << PAGE_SHIFT) / line_length;
- h = h_inc;
- } else if ((cur->index - prev_index) <= threshold) {
- /* page is within our threshold for single updates */
- h += h_inc * (cur->index - prev_index);
- } else {
- /* page not consecutive, issue previous update first */
- par->update_partial(par, y1, y1 + h);
-
- /* start over with our non consecutive page */
- y1 = (cur->index << PAGE_SHIFT) / line_length;
- h = h_inc;
- }
- prev_index = cur->index;
- }
-
- /* if we still have any pages to update we do so now */
- if (h >= yres)
- /* its a full screen update, just do it */
- par->update_all(par);
- else
- par->update_partial(par, y1, min((u16) (y1 + h), yres));
-
-out:
- pm_runtime_mark_last_busy(info->device);
- pm_runtime_put_autosuspend(info->device);
-}
-
-/*
- * framebuffer operations
- */
-
-/*
- * this is the slow path from userspace. they can seek and write to
- * the fb. it's inefficient to do anything less than a full screen draw
- */
-static ssize_t auok190xfb_write(struct fb_info *info, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct auok190xfb_par *par = info->par;
- unsigned long p = *ppos;
- void *dst;
- int err = 0;
- unsigned long total_size;
-
- if (info->state != FBINFO_STATE_RUNNING)
- return -EPERM;
-
- total_size = info->fix.smem_len;
-
- if (p > total_size)
- return -EFBIG;
-
- if (count > total_size) {
- err = -EFBIG;
- count = total_size;
- }
-
- if (count + p > total_size) {
- if (!err)
- err = -ENOSPC;
-
- count = total_size - p;
- }
-
- dst = (void *)(info->screen_base + p);
-
- if (copy_from_user(dst, buf, count))
- err = -EFAULT;
-
- if (!err)
- *ppos += count;
-
- par->update_all(par);
-
- return (err) ? err : count;
-}
-
-static void auok190xfb_fillrect(struct fb_info *info,
- const struct fb_fillrect *rect)
-{
- struct auok190xfb_par *par = info->par;
-
- sys_fillrect(info, rect);
-
- par->update_all(par);
-}
-
-static void auok190xfb_copyarea(struct fb_info *info,
- const struct fb_copyarea *area)
-{
- struct auok190xfb_par *par = info->par;
-
- sys_copyarea(info, area);
-
- par->update_all(par);
-}
-
-static void auok190xfb_imageblit(struct fb_info *info,
- const struct fb_image *image)
-{
- struct auok190xfb_par *par = info->par;
-
- sys_imageblit(info, image);
-
- par->update_all(par);
-}
-
-static int auok190xfb_check_var(struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- struct device *dev = info->device;
- struct auok190xfb_par *par = info->par;
- struct panel_info *panel = &panel_table[par->resolution];
- int size;
-
- /*
- * Color depth
- */
-
- if (var->bits_per_pixel == 8 && var->grayscale == 1) {
- /*
- * For 8-bit grayscale, R, G, and B offset are equal.
- */
- var->red.length = 8;
- var->red.offset = 0;
- var->red.msb_right = 0;
-
- var->green.length = 8;
- var->green.offset = 0;
- var->green.msb_right = 0;
-
- var->blue.length = 8;
- var->blue.offset = 0;
- var->blue.msb_right = 0;
-
- var->transp.length = 0;
- var->transp.offset = 0;
- var->transp.msb_right = 0;
- } else if (var->bits_per_pixel == 16) {
- var->red.length = 5;
- var->red.offset = 11;
- var->red.msb_right = 0;
-
- var->green.length = 6;
- var->green.offset = 5;
- var->green.msb_right = 0;
-
- var->blue.length = 5;
- var->blue.offset = 0;
- var->blue.msb_right = 0;
-
- var->transp.length = 0;
- var->transp.offset = 0;
- var->transp.msb_right = 0;
- } else {
- dev_warn(dev, "unsupported color mode (bits: %d, grayscale: %d)\n",
- info->var.bits_per_pixel, info->var.grayscale);
- return -EINVAL;
- }
-
- /*
- * Dimensions
- */
-
- switch (var->rotate) {
- case FB_ROTATE_UR:
- case FB_ROTATE_UD:
- var->xres = panel->w;
- var->yres = panel->h;
- break;
- case FB_ROTATE_CW:
- case FB_ROTATE_CCW:
- var->xres = panel->h;
- var->yres = panel->w;
- break;
- default:
- dev_dbg(dev, "Invalid rotation request\n");
- return -EINVAL;
- }
-
- var->xres_virtual = var->xres;
- var->yres_virtual = var->yres;
-
- /*
- * Memory limit
- */
-
- size = var->xres_virtual * var->yres_virtual * var->bits_per_pixel / 8;
- if (size > info->fix.smem_len) {
- dev_err(dev, "Memory limit exceeded, requested %dK\n",
- size >> 10);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static int auok190xfb_set_fix(struct fb_info *info)
-{
- struct fb_fix_screeninfo *fix = &info->fix;
- struct fb_var_screeninfo *var = &info->var;
-
- fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
-
- fix->type = FB_TYPE_PACKED_PIXELS;
- fix->accel = FB_ACCEL_NONE;
- fix->visual = (var->grayscale) ? FB_VISUAL_STATIC_PSEUDOCOLOR
- : FB_VISUAL_TRUECOLOR;
- fix->xpanstep = 0;
- fix->ypanstep = 0;
- fix->ywrapstep = 0;
-
- return 0;
-}
-
-static int auok190xfb_set_par(struct fb_info *info)
-{
- struct auok190xfb_par *par = info->par;
-
- par->rotation = info->var.rotate;
- auok190xfb_set_fix(info);
-
- /* reinit the controller to honor the rotation */
- par->init(par);
-
- /* wait for init to complete */
- par->board->wait_for_rdy(par);
-
- return 0;
-}
-
-static struct fb_ops auok190xfb_ops = {
- .owner = THIS_MODULE,
- .fb_read = fb_sys_read,
- .fb_write = auok190xfb_write,
- .fb_fillrect = auok190xfb_fillrect,
- .fb_copyarea = auok190xfb_copyarea,
- .fb_imageblit = auok190xfb_imageblit,
- .fb_check_var = auok190xfb_check_var,
- .fb_set_par = auok190xfb_set_par,
-};
-
-/*
- * Controller-functions common to both K1900 and K1901
- */
-
-static int auok190x_read_temperature(struct auok190xfb_par *par)
-{
- struct device *dev = par->info->device;
- u16 data[4];
- int temp;
-
- pm_runtime_get_sync(dev);
-
- mutex_lock(&(par->io_lock));
-
- auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data);
-
- mutex_unlock(&(par->io_lock));
-
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
-
- /* sanitize and split of half-degrees for now */
- temp = ((data[0] & AUOK190X_VERSION_TEMP_MASK) >> 1);
-
- /* handle positive and negative temperatures */
- if (temp >= 201)
- return (255 - temp + 1) * (-1);
- else
- return temp;
-}
-
-static void auok190x_identify(struct auok190xfb_par *par)
-{
- struct device *dev = par->info->device;
- u16 data[4];
-
- pm_runtime_get_sync(dev);
-
- mutex_lock(&(par->io_lock));
-
- auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data);
-
- mutex_unlock(&(par->io_lock));
-
- par->epd_type = data[1] & AUOK190X_VERSION_TEMP_MASK;
-
- par->panel_size_int = AUOK190X_VERSION_SIZE_INT(data[2]);
- par->panel_size_float = AUOK190X_VERSION_SIZE_FLOAT(data[2]);
- par->panel_model = AUOK190X_VERSION_MODEL(data[2]);
-
- par->tcon_version = AUOK190X_VERSION_TCON(data[3]);
- par->lut_version = AUOK190X_VERSION_LUT(data[3]);
-
- dev_dbg(dev, "panel %d.%din, model 0x%x, EPD 0x%x TCON-rev 0x%x, LUT-rev 0x%x",
- par->panel_size_int, par->panel_size_float, par->panel_model,
- par->epd_type, par->tcon_version, par->lut_version);
-
- pm_runtime_mark_last_busy(dev);
- pm_runtime_put_autosuspend(dev);
-}
-
-/*
- * Sysfs functions
- */
-
-static ssize_t update_mode_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct fb_info *info = dev_get_drvdata(dev);
- struct auok190xfb_par *par = info->par;
-
- return sprintf(buf, "%d\n", par->update_mode);
-}
-
-static ssize_t update_mode_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct fb_info *info = dev_get_drvdata(dev);
- struct auok190xfb_par *par = info->par;
- int mode, ret;
-
- ret = kstrtoint(buf, 10, &mode);
- if (ret)
- return ret;
-
- par->update_mode = mode;
-
- /* if we enter a better mode, do a full update */
- if (par->last_mode > 1 && mode < par->last_mode)
- par->update_all(par);
-
- return count;
-}
-
-static ssize_t flash_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct fb_info *info = dev_get_drvdata(dev);
- struct auok190xfb_par *par = info->par;
-
- return sprintf(buf, "%d\n", par->flash);
-}
-
-static ssize_t flash_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct fb_info *info = dev_get_drvdata(dev);
- struct auok190xfb_par *par = info->par;
- int flash, ret;
-
- ret = kstrtoint(buf, 10, &flash);
- if (ret)
- return ret;
-
- if (flash > 0)
- par->flash = 1;
- else
- par->flash = 0;
-
- return count;
-}
-
-static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct fb_info *info = dev_get_drvdata(dev);
- struct auok190xfb_par *par = info->par;
- int temp;
-
- temp = auok190x_read_temperature(par);
- return sprintf(buf, "%d\n", temp);
-}
-
-static DEVICE_ATTR_RW(update_mode);
-static DEVICE_ATTR_RW(flash);
-static DEVICE_ATTR(temp, 0644, temp_show, NULL);
-
-static struct attribute *auok190x_attributes[] = {
- &dev_attr_update_mode.attr,
- &dev_attr_flash.attr,
- &dev_attr_temp.attr,
- NULL
-};
-
-static const struct attribute_group auok190x_attr_group = {
- .attrs = auok190x_attributes,
-};
-
-static int auok190x_power(struct auok190xfb_par *par, bool on)
-{
- struct auok190x_board *board = par->board;
- int ret;
-
- if (on) {
- /* We should maintain POWER up for at least 80ms before set
- * RST_N and SLP_N to high (TCON spec 20100803_v35 p59)
- */
- ret = regulator_enable(par->regulator);
- if (ret)
- return ret;
-
- msleep(200);
- gpio_set_value(board->gpio_nrst, 1);
- gpio_set_value(board->gpio_nsleep, 1);
- msleep(200);
- } else {
- regulator_disable(par->regulator);
- gpio_set_value(board->gpio_nrst, 0);
- gpio_set_value(board->gpio_nsleep, 0);
- }
-
- return 0;
-}
-
-/*
- * Recovery - powercycle the controller
- */
-
-static void auok190x_recover(struct auok190xfb_par *par)
-{
- struct device *dev = par->info->device;
-
- auok190x_power(par, 0);
- msleep(100);
- auok190x_power(par, 1);
-
- /* after powercycling the device, it's always active */
- pm_runtime_set_active(dev);
- par->standby = 0;
-
- par->init(par);
-
- /* wait for init to complete */
- par->board->wait_for_rdy(par);
-}
-
-/*
- * Power-management
- */
-static int __maybe_unused auok190x_runtime_suspend(struct device *dev)
-{
- struct fb_info *info = dev_get_drvdata(dev);
- struct auok190xfb_par *par = info->par;
- struct auok190x_board *board = par->board;
- u16 standby_param;
-
- /* take and keep the lock until we are resumed, as the controller
- * will never reach the non-busy state when in standby mode
- */
- mutex_lock(&(par->io_lock));
-
- if (par->standby) {
- dev_warn(dev, "already in standby, runtime-pm pairing mismatch\n");
- mutex_unlock(&(par->io_lock));
- return 0;
- }
-
- /* according to runtime_pm.txt runtime_suspend only means, that the
- * device will not process data and will not communicate with the CPU
- * As we hold the lock, this stays true even without standby
- */
- if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
- dev_dbg(dev, "runtime suspend without standby\n");
- goto finish;
- } else if (board->quirks & AUOK190X_QUIRK_STANDBYPARAM) {
- /* for some TCON versions STANDBY expects a parameter (0) but
- * it seems the real tcon version has to be determined yet.
- */
- dev_dbg(dev, "runtime suspend with additional empty param\n");
- standby_param = 0;
- auok190x_send_cmdargs(par, AUOK190X_CMD_STANDBY, 1,
- &standby_param);
- } else {
- dev_dbg(dev, "runtime suspend without param\n");
- auok190x_send_command(par, AUOK190X_CMD_STANDBY);
- }
-
- msleep(64);
-
-finish:
- par->standby = 1;
-
- return 0;
-}
-
-static int __maybe_unused auok190x_runtime_resume(struct device *dev)
-{
- struct fb_info *info = dev_get_drvdata(dev);
- struct auok190xfb_par *par = info->par;
- struct auok190x_board *board = par->board;
-
- if (!par->standby) {
- dev_warn(dev, "not in standby, runtime-pm pairing mismatch\n");
- return 0;
- }
-
- if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
- dev_dbg(dev, "runtime resume without standby\n");
- } else {
- /* when in standby, controller is always busy
- * and only accepts the wakeup command
- */
- dev_dbg(dev, "runtime resume from standby\n");
- auok190x_send_command_nowait(par, AUOK190X_CMD_WAKEUP);
-
- msleep(160);
-
- /* wait for the controller to be ready and release the lock */
- board->wait_for_rdy(par);
- }
-
- par->standby = 0;
-
- mutex_unlock(&(par->io_lock));
-
- return 0;
-}
-
-static int __maybe_unused auok190x_suspend(struct device *dev)
-{
- struct fb_info *info = dev_get_drvdata(dev);
- struct auok190xfb_par *par = info->par;
- struct auok190x_board *board = par->board;
- int ret;
-
- dev_dbg(dev, "suspend\n");
- if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
- /* suspend via powering off the ic */
- dev_dbg(dev, "suspend with broken standby\n");
-
- auok190x_power(par, 0);
- } else {
- dev_dbg(dev, "suspend using sleep\n");
-
- /* the sleep state can only be entered from the standby state.
- * pm_runtime_get_noresume gets called before the suspend call.
- * So the devices usage count is >0 but it is not necessarily
- * active.
- */
- if (!pm_runtime_status_suspended(dev)) {
- ret = auok190x_runtime_suspend(dev);
- if (ret < 0) {
- dev_err(dev, "auok190x_runtime_suspend failed with %d\n",
- ret);
- return ret;
- }
- par->manual_standby = 1;
- }
-
- gpio_direction_output(board->gpio_nsleep, 0);
- }
-
- msleep(100);
-
- return 0;
-}
-
-static int __maybe_unused auok190x_resume(struct device *dev)
-{
- struct fb_info *info = dev_get_drvdata(dev);
- struct auok190xfb_par *par = info->par;
- struct auok190x_board *board = par->board;
-
- dev_dbg(dev, "resume\n");
- if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
- dev_dbg(dev, "resume with broken standby\n");
-
- auok190x_power(par, 1);
-
- par->init(par);
- } else {
- dev_dbg(dev, "resume from sleep\n");
-
- /* device should be in runtime suspend when we were suspended
- * and pm_runtime_put_sync gets called after this function.
- * So there is no need to touch the standby mode here at all.
- */
- gpio_direction_output(board->gpio_nsleep, 1);
- msleep(100);
-
- /* an additional init call seems to be necessary after sleep */
- auok190x_runtime_resume(dev);
- par->init(par);
-
- /* if we were runtime-suspended before, suspend again*/
- if (!par->manual_standby)
- auok190x_runtime_suspend(dev);
- else
- par->manual_standby = 0;
- }
-
- return 0;
-}
-
-const struct dev_pm_ops auok190x_pm = {
- SET_RUNTIME_PM_OPS(auok190x_runtime_suspend, auok190x_runtime_resume,
- NULL)
- SET_SYSTEM_SLEEP_PM_OPS(auok190x_suspend, auok190x_resume)
-};
-EXPORT_SYMBOL_GPL(auok190x_pm);
-
-/*
- * Common probe and remove code
- */
-
-int auok190x_common_probe(struct platform_device *pdev,
- struct auok190x_init_data *init)
-{
- struct auok190x_board *board = init->board;
- struct auok190xfb_par *par;
- struct fb_info *info;
- struct panel_info *panel;
- int videomemorysize, ret;
- unsigned char *videomemory;
-
- /* check board contents */
- if (!board->init || !board->cleanup || !board->wait_for_rdy
- || !board->set_ctl || !board->set_hdb || !board->get_hdb
- || !board->setup_irq)
- return -EINVAL;
-
- info = framebuffer_alloc(sizeof(struct auok190xfb_par), &pdev->dev);
- if (!info)
- return -ENOMEM;
-
- par = info->par;
- par->info = info;
- par->board = board;
- par->recover = auok190x_recover;
- par->update_partial = init->update_partial;
- par->update_all = init->update_all;
- par->need_refresh = init->need_refresh;
- par->init = init->init;
-
- /* init update modes */
- par->update_cnt = 0;
- par->update_mode = -1;
- par->last_mode = -1;
- par->flash = 0;
-
- par->regulator = regulator_get(info->device, "vdd");
- if (IS_ERR(par->regulator)) {
- ret = PTR_ERR(par->regulator);
- dev_err(info->device, "Failed to get regulator: %d\n", ret);
- goto err_reg;
- }
-
- ret = board->init(par);
- if (ret) {
- dev_err(info->device, "board init failed, %d\n", ret);
- goto err_board;
- }
-
- ret = gpio_request(board->gpio_nsleep, "AUOK190x sleep");
- if (ret) {
- dev_err(info->device, "could not request sleep gpio, %d\n",
- ret);
- goto err_gpio1;
- }
-
- ret = gpio_direction_output(board->gpio_nsleep, 0);
- if (ret) {
- dev_err(info->device, "could not set sleep gpio, %d\n", ret);
- goto err_gpio2;
- }
-
- ret = gpio_request(board->gpio_nrst, "AUOK190x reset");
- if (ret) {
- dev_err(info->device, "could not request reset gpio, %d\n",
- ret);
- goto err_gpio2;
- }
-
- ret = gpio_direction_output(board->gpio_nrst, 0);
- if (ret) {
- dev_err(info->device, "could not set reset gpio, %d\n", ret);
- goto err_gpio3;
- }
-
- ret = auok190x_power(par, 1);
- if (ret) {
- dev_err(info->device, "could not power on the device, %d\n",
- ret);
- goto err_gpio3;
- }
-
- mutex_init(&par->io_lock);
-
- init_waitqueue_head(&par->waitq);
-
- ret = par->board->setup_irq(par->info);
- if (ret) {
- dev_err(info->device, "could not setup ready-irq, %d\n", ret);
- goto err_irq;
- }
-
- /* wait for init to complete */
- par->board->wait_for_rdy(par);
-
- /*
- * From here on the controller can talk to us
- */
-
- /* initialise fix, var, resolution and rotation */
-
- strlcpy(info->fix.id, init->id, 16);
- info->var.bits_per_pixel = 8;
- info->var.grayscale = 1;
-
- panel = &panel_table[board->resolution];
-
- par->resolution = board->resolution;
- par->rotation = 0;
-
- /* videomemory handling */
-
- videomemorysize = roundup((panel->w * panel->h) * 2, PAGE_SIZE);
- videomemory = vzalloc(videomemorysize);
- if (!videomemory) {
- ret = -ENOMEM;
- goto err_irq;
- }
-
- info->screen_base = (char *)videomemory;
- info->fix.smem_len = videomemorysize;
-
- info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
- info->fbops = &auok190xfb_ops;
-
- ret = auok190xfb_check_var(&info->var, info);
- if (ret)
- goto err_defio;
-
- auok190xfb_set_fix(info);
-
- /* deferred io init */
-
- info->fbdefio = devm_kzalloc(info->device,
- sizeof(struct fb_deferred_io),
- GFP_KERNEL);
- if (!info->fbdefio) {
- ret = -ENOMEM;
- goto err_defio;
- }
-
- dev_dbg(info->device, "targeting %d frames per second\n", board->fps);
- info->fbdefio->delay = HZ / board->fps;
- info->fbdefio->first_io = auok190xfb_dpy_first_io,
- info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io,
- fb_deferred_io_init(info);
-
- /* color map */
-
- ret = fb_alloc_cmap(&info->cmap, 256, 0);
- if (ret < 0) {
- dev_err(info->device, "Failed to allocate colormap\n");
- goto err_cmap;
- }
-
- /* controller init */
-
- par->consecutive_threshold = 100;
- par->init(par);
- auok190x_identify(par);
-
- platform_set_drvdata(pdev, info);
-
- ret = register_framebuffer(info);
- if (ret < 0)
- goto err_regfb;
-
- ret = sysfs_create_group(&info->device->kobj, &auok190x_attr_group);
- if (ret)
- goto err_sysfs;
-
- dev_info(info->device, "fb%d: %dx%d using %dK of video memory\n",
- info->node, info->var.xres, info->var.yres,
- videomemorysize >> 10);
-
- /* increase autosuspend_delay when we use alternative methods
- * for runtime_pm
- */
- par->autosuspend_delay = (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN)
- ? 1000 : 200;
-
- pm_runtime_set_active(info->device);
- pm_runtime_enable(info->device);
- pm_runtime_set_autosuspend_delay(info->device, par->autosuspend_delay);
- pm_runtime_use_autosuspend(info->device);
-
- return 0;
-
-err_sysfs:
- unregister_framebuffer(info);
-err_regfb:
- fb_dealloc_cmap(&info->cmap);
-err_cmap:
- fb_deferred_io_cleanup(info);
-err_defio:
- vfree((void *)info->screen_base);
-err_irq:
- auok190x_power(par, 0);
-err_gpio3:
- gpio_free(board->gpio_nrst);
-err_gpio2:
- gpio_free(board->gpio_nsleep);
-err_gpio1:
- board->cleanup(par);
-err_board:
- regulator_put(par->regulator);
-err_reg:
- framebuffer_release(info);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(auok190x_common_probe);
-
-int auok190x_common_remove(struct platform_device *pdev)
-{
- struct fb_info *info = platform_get_drvdata(pdev);
- struct auok190xfb_par *par = info->par;
- struct auok190x_board *board = par->board;
-
- pm_runtime_disable(info->device);
-
- sysfs_remove_group(&info->device->kobj, &auok190x_attr_group);
-
- unregister_framebuffer(info);
-
- fb_dealloc_cmap(&info->cmap);
-
- fb_deferred_io_cleanup(info);
-
- vfree((void *)info->screen_base);
-
- auok190x_power(par, 0);
-
- gpio_free(board->gpio_nrst);
- gpio_free(board->gpio_nsleep);
-
- board->cleanup(par);
-
- regulator_put(par->regulator);
-
- framebuffer_release(info);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(auok190x_common_remove);
-
-MODULE_DESCRIPTION("Common code for AUO-K190X controllers");
-MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/auo_k190x.h b/drivers/video/fbdev/auo_k190x.h
deleted file mode 100644
index e35af1f51b28..000000000000
--- a/drivers/video/fbdev/auo_k190x.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Private common definitions for AUO-K190X framebuffer drivers
- *
- * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * I80 interface specific defines
- */
-
-#define AUOK190X_I80_CS 0x01
-#define AUOK190X_I80_DC 0x02
-#define AUOK190X_I80_WR 0x03
-#define AUOK190X_I80_OE 0x04
-
-/*
- * AUOK190x commands, common to both controllers
- */
-
-#define AUOK190X_CMD_INIT 0x0000
-#define AUOK190X_CMD_STANDBY 0x0001
-#define AUOK190X_CMD_WAKEUP 0x0002
-#define AUOK190X_CMD_TCON_RESET 0x0003
-#define AUOK190X_CMD_DATA_STOP 0x1002
-#define AUOK190X_CMD_LUT_START 0x1003
-#define AUOK190X_CMD_DISP_REFRESH 0x1004
-#define AUOK190X_CMD_DISP_RESET 0x1005
-#define AUOK190X_CMD_PRE_DISPLAY_START 0x100D
-#define AUOK190X_CMD_PRE_DISPLAY_STOP 0x100F
-#define AUOK190X_CMD_FLASH_W 0x2000
-#define AUOK190X_CMD_FLASH_E 0x2001
-#define AUOK190X_CMD_FLASH_STS 0x2002
-#define AUOK190X_CMD_FRAMERATE 0x3000
-#define AUOK190X_CMD_READ_VERSION 0x4000
-#define AUOK190X_CMD_READ_STATUS 0x4001
-#define AUOK190X_CMD_READ_LUT 0x4003
-#define AUOK190X_CMD_DRIVERTIMING 0x5000
-#define AUOK190X_CMD_LBALANCE 0x5001
-#define AUOK190X_CMD_AGINGMODE 0x6000
-#define AUOK190X_CMD_AGINGEXIT 0x6001
-
-/*
- * Common settings for AUOK190X_CMD_INIT
- */
-
-#define AUOK190X_INIT_DATA_FILTER (0 << 12)
-#define AUOK190X_INIT_DATA_BYPASS (1 << 12)
-#define AUOK190X_INIT_INVERSE_WHITE (0 << 9)
-#define AUOK190X_INIT_INVERSE_BLACK (1 << 9)
-#define AUOK190X_INIT_SCAN_DOWN (0 << 1)
-#define AUOK190X_INIT_SCAN_UP (1 << 1)
-#define AUOK190X_INIT_SHIFT_LEFT (0 << 0)
-#define AUOK190X_INIT_SHIFT_RIGHT (1 << 0)
-
-/* Common bits to pixels
- * Mode 15-12 11-8 7-4 3-0
- * format0 4 3 2 1
- * format1 3 4 1 2
- */
-
-#define AUOK190X_INIT_FORMAT0 0
-#define AUOK190X_INIT_FORMAT1 (1 << 6)
-
-/*
- * settings for AUOK190X_CMD_RESET
- */
-
-#define AUOK190X_RESET_TCON (0 << 0)
-#define AUOK190X_RESET_NORMAL (1 << 0)
-#define AUOK190X_RESET_PON (1 << 1)
-
-/*
- * AUOK190X_CMD_VERSION
- */
-
-#define AUOK190X_VERSION_TEMP_MASK (0x1ff)
-#define AUOK190X_VERSION_EPD_MASK (0xff)
-#define AUOK190X_VERSION_SIZE_INT(_val) ((_val & 0xfc00) >> 10)
-#define AUOK190X_VERSION_SIZE_FLOAT(_val) ((_val & 0x3c0) >> 6)
-#define AUOK190X_VERSION_MODEL(_val) (_val & 0x3f)
-#define AUOK190X_VERSION_LUT(_val) (_val & 0xff)
-#define AUOK190X_VERSION_TCON(_val) ((_val & 0xff00) >> 8)
-
-/*
- * update modes for CMD_PARTIALDISP on K1900 and CMD_DDMA on K1901
- */
-
-#define AUOK190X_UPDATE_MODE(_res) ((_res & 0x7) << 12)
-#define AUOK190X_UPDATE_NONFLASH (1 << 15)
-
-/*
- * track panel specific parameters for common init
- */
-
-struct auok190x_init_data {
- char *id;
- struct auok190x_board *board;
-
- void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2);
- void (*update_all)(struct auok190xfb_par *par);
- bool (*need_refresh)(struct auok190xfb_par *par);
- void (*init)(struct auok190xfb_par *par);
-};
-
-
-extern void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data);
-extern int auok190x_send_command(struct auok190xfb_par *par, u16 data);
-extern void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd,
- int argc, u16 *argv);
-extern int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd,
- int argc, u16 *argv);
-extern void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par,
- u16 cmd, int argc, u16 *argv,
- int size, u16 *data);
-extern int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd,
- int argc, u16 *argv, int size,
- u16 *data);
-extern int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd,
- int argc, u16 *argv);
-
-extern int auok190x_common_probe(struct platform_device *pdev,
- struct auok190x_init_data *init);
-extern int auok190x_common_remove(struct platform_device *pdev);
-
-extern const struct dev_pm_ops auok190x_pm;
diff --git a/include/video/auo_k190xfb.h b/include/video/auo_k190xfb.h
deleted file mode 100644
index ac329ee1d753..000000000000
--- a/include/video/auo_k190xfb.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Definitions for AUO-K190X framebuffer drivers
- *
- * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _LINUX_VIDEO_AUO_K190XFB_H_
-#define _LINUX_VIDEO_AUO_K190XFB_H_
-
-/* Controller standby command needs a param */
-#define AUOK190X_QUIRK_STANDBYPARAM (1 << 0)
-
-/* Controller standby is completely broken */
-#define AUOK190X_QUIRK_STANDBYBROKEN (1 << 1)
-
-/*
- * Resolutions for the displays
- */
-#define AUOK190X_RESOLUTION_800_600 0
-#define AUOK190X_RESOLUTION_1024_768 1
-#define AUOK190X_RESOLUTION_600_800 4
-#define AUOK190X_RESOLUTION_768_1024 5
-
-/*
- * struct used by auok190x. board specific stuff comes from *board
- */
-struct auok190xfb_par {
- struct fb_info *info;
- struct auok190x_board *board;
-
- struct regulator *regulator;
-
- struct mutex io_lock;
- struct delayed_work work;
- wait_queue_head_t waitq;
- int resolution;
- int rotation;
- int consecutive_threshold;
- int update_cnt;
-
- /* panel and controller informations */
- int epd_type;
- int panel_size_int;
- int panel_size_float;
- int panel_model;
- int tcon_version;
- int lut_version;
-
- /* individual controller callbacks */
- void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2);
- void (*update_all)(struct auok190xfb_par *par);
- bool (*need_refresh)(struct auok190xfb_par *par);
- void (*init)(struct auok190xfb_par *par);
- void (*recover)(struct auok190xfb_par *par);
-
- int update_mode; /* mode to use for updates */
- int last_mode; /* update mode last used */
- int flash;
-
- /* power management */
- int autosuspend_delay;
- bool standby;
- bool manual_standby;
-};
-
-/**
- * Board specific platform-data
- * @init: initialize the controller interface
- * @cleanup: cleanup the controller interface
- * @wait_for_rdy: wait until the controller is not busy anymore
- * @set_ctl: change an interface control
- * @set_hdb: write a value to the data register
- * @get_hdb: read a value from the data register
- * @setup_irq: method to setup the irq handling on the busy gpio
- * @gpio_nsleep: sleep gpio
- * @gpio_nrst: reset gpio
- * @gpio_nbusy: busy gpio
- * @resolution: one of the AUOK190X_RESOLUTION constants
- * @rotation: rotation of the framebuffer
- * @quirks: controller quirks to honor
- * @fps: frames per second for defio
- */
-struct auok190x_board {
- int (*init)(struct auok190xfb_par *);
- void (*cleanup)(struct auok190xfb_par *);
- int (*wait_for_rdy)(struct auok190xfb_par *);
-
- void (*set_ctl)(struct auok190xfb_par *, unsigned char, u8);
- void (*set_hdb)(struct auok190xfb_par *, u16);
- u16 (*get_hdb)(struct auok190xfb_par *);
-
- int (*setup_irq)(struct fb_info *);
-
- int gpio_nsleep;
- int gpio_nrst;
- int gpio_nbusy;
-
- int resolution;
- int quirks;
- int fps;
-};
-
-#endif