summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/sparc/kernel/setup.c5
-rw-r--r--arch/sparc/mm/fault.c61
-rw-r--r--arch/sparc/prom/memory.c144
-rw-r--r--include/asm-sparc/oplib.h7
-rw-r--r--include/asm-sparc/page.h5
5 files changed, 71 insertions, 151 deletions
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index 3c13137685da..8a55c4f0df84 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -180,11 +180,9 @@ static void __init boot_flags_init(char *commands)
/* This routine will in the future do all the nasty prom stuff
* to probe for the mmu type and its parameters, etc. This will
- * also be where SMP things happen plus the Sparc specific memory
- * physical memory probe as on the alpha.
+ * also be where SMP things happen.
*/
-extern int prom_probe_memory(void);
extern void sun4c_probe_vac(void);
extern char cputypval;
extern unsigned long start, end;
@@ -268,7 +266,6 @@ void __init setup_arch(char **cmdline_p)
if (ARCH_SUN4C_SUN4)
sun4c_probe_vac();
load_mmu();
- (void) prom_probe_memory();
phys_base = 0xffffffffUL;
highest_paddr = 0UL;
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index f25876a56fe6..abd50795a7b6 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -47,64 +47,15 @@ int vac_size, vac_linesize, vac_do_hw_vac_flushes;
int vac_entries_per_context, vac_entries_per_segment;
int vac_entries_per_page;
-/* Nice, simple, prom library does all the sweating for us. ;) */
-int prom_probe_memory (void)
+/* Return how much physical memory we have. */
+unsigned long probe_memory(void)
{
- register struct linux_mlist_v0 *mlist;
- register unsigned long bytes, base_paddr, tally;
- register int i;
-
- i = 0;
- mlist= prom_meminfo();
- bytes = tally = mlist->num_bytes;
- base_paddr = (unsigned long) mlist->start_adr;
-
- sp_banks[0].base_addr = base_paddr;
- sp_banks[0].num_bytes = bytes;
-
- while (mlist->theres_more != (void *) 0){
- i++;
- mlist = mlist->theres_more;
- bytes = mlist->num_bytes;
- tally += bytes;
- if (i > SPARC_PHYS_BANKS-1) {
- printk ("The machine has more banks than "
- "this kernel can support\n"
- "Increase the SPARC_PHYS_BANKS "
- "setting (currently %d)\n",
- SPARC_PHYS_BANKS);
- i = SPARC_PHYS_BANKS-1;
- break;
- }
-
- sp_banks[i].base_addr = (unsigned long) mlist->start_adr;
- sp_banks[i].num_bytes = mlist->num_bytes;
- }
-
- i++;
- sp_banks[i].base_addr = 0xdeadbeef;
- sp_banks[i].num_bytes = 0;
-
- /* Now mask all bank sizes on a page boundary, it is all we can
- * use anyways.
- */
- for(i=0; sp_banks[i].num_bytes != 0; i++)
- sp_banks[i].num_bytes &= PAGE_MASK;
-
- return tally;
-}
-
-/* Traverse the memory lists in the prom to see how much physical we
- * have.
- */
-unsigned long
-probe_memory(void)
-{
- int total;
+ unsigned long total = 0;
+ int i;
- total = prom_probe_memory();
+ for (i = 0; sp_banks[i].num_bytes; i++)
+ total += sp_banks[i].num_bytes;
- /* Oh man, much nicer, keep the dirt in promlib. */
return total;
}
diff --git a/arch/sparc/prom/memory.c b/arch/sparc/prom/memory.c
index 08ac1bf2e588..947f047dc95a 100644
--- a/arch/sparc/prom/memory.c
+++ b/arch/sparc/prom/memory.c
@@ -1,120 +1,100 @@
/* memory.c: Prom routine for acquiring various bits of information
* about RAM on the machine, both virtual and physical.
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
* Copyright (C) 1997 Michael A. Griffith (grif@acm.org)
*/
#include <linux/kernel.h>
+#include <linux/sort.h>
#include <linux/init.h>
#include <asm/openprom.h>
#include <asm/sun4prom.h>
#include <asm/oplib.h>
+#include <asm/page.h>
-/* This routine, for consistency, returns the ram parameters in the
- * V0 prom memory descriptor format. I choose this format because I
- * think it was the easiest to work with. I feel the religious
- * arguments now... ;) Also, I return the linked lists sorted to
- * prevent paging_init() upset stomach as I have not yet written
- * the pepto-bismol kernel module yet.
- */
+static int __init prom_meminit_v0(void)
+{
+ struct linux_mlist_v0 *p;
+ int index;
-struct linux_prom_registers prom_reg_memlist[64];
+ index = 0;
+ for (p = *(romvec->pv_v0mem.v0_available); p; p = p->theres_more) {
+ sp_banks[index].base_addr = (unsigned long) p->start_adr;
+ sp_banks[index].num_bytes = p->num_bytes;
+ index++;
+ }
-struct linux_mlist_v0 prom_phys_avail[64];
+ return index;
+}
-/* Internal Prom library routine to sort a linux_mlist_v0 memory
- * list. Used below in initialization.
- */
-static void __init
-prom_sortmemlist(struct linux_mlist_v0 *thislist)
+static int __init prom_meminit_v2(void)
{
- int swapi = 0;
- int i, mitr, tmpsize;
- char *tmpaddr;
- char *lowest;
-
- for(i=0; thislist[i].theres_more; i++) {
- lowest = thislist[i].start_adr;
- for(mitr = i+1; thislist[mitr-1].theres_more; mitr++)
- if(thislist[mitr].start_adr < lowest) {
- lowest = thislist[mitr].start_adr;
- swapi = mitr;
- }
- if(lowest == thislist[i].start_adr) continue;
- tmpaddr = thislist[swapi].start_adr;
- tmpsize = thislist[swapi].num_bytes;
- for(mitr = swapi; mitr > i; mitr--) {
- thislist[mitr].start_adr = thislist[mitr-1].start_adr;
- thislist[mitr].num_bytes = thislist[mitr-1].num_bytes;
- }
- thislist[i].start_adr = tmpaddr;
- thislist[i].num_bytes = tmpsize;
+ struct linux_prom_registers reg[64];
+ int node, size, num_ents, i;
+
+ node = prom_searchsiblings(prom_getchild(prom_root_node), "memory");
+ size = prom_getproperty(node, "available", (char *) reg, sizeof(reg));
+ num_ents = size / sizeof(struct linux_prom_registers);
+
+ for (i = 0; i < num_ents; i++) {
+ sp_banks[i].base_addr = reg[i].phys_addr;
+ sp_banks[i].num_bytes = reg[i].reg_size;
}
- return;
+ return num_ents;
+}
+
+static int __init prom_meminit_sun4(void)
+{
+#ifdef CONFIG_SUN4
+ sp_banks[0].base_addr = 0;
+ sp_banks[0].num_bytes = *(sun4_romvec->memoryavail);
+#endif
+ return 1;
+}
+
+static int sp_banks_cmp(const void *a, const void *b)
+{
+ const struct sparc_phys_banks *x = a, *y = b;
+
+ if (x->base_addr > y->base_addr)
+ return 1;
+ if (x->base_addr < y->base_addr)
+ return -1;
+ return 0;
}
/* Initialize the memory lists based upon the prom version. */
void __init prom_meminit(void)
{
- int node = 0;
- unsigned int iter, num_regs;
- struct linux_mlist_v0 *mptr; /* ptr for traversal */
+ int i, num_ents = 0;
- switch(prom_vers) {
+ switch (prom_vers) {
case PROM_V0:
- /* Nice, kind of easier to do in this case. */
- for(mptr = (*(romvec->pv_v0mem.v0_available)), iter=0;
- mptr; mptr=mptr->theres_more, iter++) {
- prom_phys_avail[iter].start_adr = mptr->start_adr;
- prom_phys_avail[iter].num_bytes = mptr->num_bytes;
- prom_phys_avail[iter].theres_more = &prom_phys_avail[iter+1];
- }
- prom_phys_avail[iter-1].theres_more = NULL;
- prom_sortmemlist(prom_phys_avail);
+ num_ents = prom_meminit_v0();
break;
+
case PROM_V2:
case PROM_V3:
- /* Grrr, have to traverse the prom device tree ;( */
- node = prom_getchild(prom_root_node);
- node = prom_searchsiblings(node, "memory");
- num_regs = prom_getproperty(node, "available",
- (char *) prom_reg_memlist,
- sizeof(prom_reg_memlist));
- num_regs = (num_regs/sizeof(struct linux_prom_registers));
- for(iter=0; iter<num_regs; iter++) {
- prom_phys_avail[iter].start_adr =
- (char *) prom_reg_memlist[iter].phys_addr;
- prom_phys_avail[iter].num_bytes =
- (unsigned long) prom_reg_memlist[iter].reg_size;
- prom_phys_avail[iter].theres_more =
- &prom_phys_avail[iter+1];
- }
- prom_phys_avail[iter-1].theres_more = NULL;
- prom_sortmemlist(prom_phys_avail);
+ num_ents = prom_meminit_v2();
break;
case PROM_SUN4:
-#ifdef CONFIG_SUN4
- /* how simple :) */
- prom_phys_avail[0].start_adr = NULL;
- prom_phys_avail[0].num_bytes = *(sun4_romvec->memoryavail);
- prom_phys_avail[0].theres_more = NULL;
-#endif
+ num_ents = prom_meminit_sun4();
break;
default:
break;
- };
-}
+ }
+ sort(sp_banks, num_ents, sizeof(struct sparc_phys_banks),
+ sp_banks_cmp, NULL);
-/* This returns a pointer to our libraries internal v0 format
- * available memory list.
- */
-struct linux_mlist_v0 *
-prom_meminfo(void)
-{
- return prom_phys_avail;
+ /* Sentinel. */
+ sp_banks[num_ents].base_addr = 0xdeadbeef;
+ sp_banks[num_ents].num_bytes = 0;
+
+ for (i = 0; i < num_ents; i++)
+ sp_banks[i].num_bytes &= PAGE_MASK;
}
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
index 6ff1a3bb15bc..22dc39d97b4e 100644
--- a/include/asm-sparc/oplib.h
+++ b/include/asm-sparc/oplib.h
@@ -84,13 +84,6 @@ extern int prom_devclose(int device_handle);
extern void prom_seek(int device_handle, unsigned int seek_hival,
unsigned int seek_lowval);
-/* Machine memory configuration routine. */
-
-/* This function returns a V0 format available memory descriptor entry.
- * This list is pre-sorted,
- */
-extern struct linux_mlist_v0 *prom_meminfo(void);
-
/* Miscellaneous routines, don't really fit in any category per se. */
/* Reboot the machine with the command line passed. */
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
index 39ccf2da297c..1625a8c3e0d2 100644
--- a/include/asm-sparc/page.h
+++ b/include/asm-sparc/page.h
@@ -38,12 +38,11 @@
/* The following structure is used to hold the physical
* memory configuration of the machine. This is filled in
- * probe_memory() and is later used by mem_init() to set up
- * mem_map[]. We statically allocate SPARC_PHYS_BANKS of
+ * prom_meminit() and is later used by mem_init() to set up
+ * mem_map[]. We statically allocate SPARC_PHYS_BANKS+1 of
* these structs, this is arbitrary. The entry after the
* last valid one has num_bytes==0.
*/
-
struct sparc_phys_banks {
unsigned long base_addr;
unsigned long num_bytes;