summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-platform.txt22
-rw-r--r--Documentation/devicetree/bindings/ata/apm-xgene.txt76
-rw-r--r--arch/arm/mach-davinci/da850.c2
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c99
-rw-r--r--arch/arm64/boot/dts/apm-storm.dtsi152
-rw-r--r--drivers/ata/Kconfig56
-rw-r--r--drivers/ata/Makefile8
-rw-r--r--drivers/ata/acard-ahci.c1
-rw-r--r--drivers/ata/ahci.c7
-rw-r--r--drivers/ata/ahci.h14
-rw-r--r--drivers/ata/ahci_da850.c114
-rw-r--r--drivers/ata/ahci_imx.c333
-rw-r--r--drivers/ata/ahci_platform.c291
-rw-r--r--drivers/ata/ahci_st.c245
-rw-r--r--drivers/ata/ahci_sunxi.c249
-rw-r--r--drivers/ata/ahci_xgene.c486
-rw-r--r--drivers/ata/ata_generic.c1
-rw-r--r--drivers/ata/libahci.c38
-rw-r--r--drivers/ata/libahci_platform.c541
-rw-r--r--drivers/ata/libata-acpi.c1
-rw-r--r--drivers/ata/libata-core.c135
-rw-r--r--drivers/ata/libata-eh.c18
-rw-r--r--drivers/ata/libata-zpodd.c21
-rw-r--r--drivers/ata/pata_acpi.c1
-rw-r--r--drivers/ata/pata_amd.c1
-rw-r--r--drivers/ata/pata_arasan_cf.c2
-rw-r--r--drivers/ata/pata_artop.c1
-rw-r--r--drivers/ata/pata_at91.c1
-rw-r--r--drivers/ata/pata_atiixp.c1
-rw-r--r--drivers/ata/pata_atp867x.c1
-rw-r--r--drivers/ata/pata_cmd640.c1
-rw-r--r--drivers/ata/pata_cmd64x.c1
-rw-r--r--drivers/ata/pata_cs5520.c1
-rw-r--r--drivers/ata/pata_cs5530.c1
-rw-r--r--drivers/ata/pata_cs5535.c1
-rw-r--r--drivers/ata/pata_cs5536.c1
-rw-r--r--drivers/ata/pata_cypress.c1
-rw-r--r--drivers/ata/pata_efar.c1
-rw-r--r--drivers/ata/pata_ep93xx.c1
-rw-r--r--drivers/ata/pata_hpt366.c1
-rw-r--r--drivers/ata/pata_hpt37x.c1
-rw-r--r--drivers/ata/pata_hpt3x2n.c1
-rw-r--r--drivers/ata/pata_hpt3x3.c1
-rw-r--r--drivers/ata/pata_imx.c18
-rw-r--r--drivers/ata/pata_it8213.c1
-rw-r--r--drivers/ata/pata_it821x.c1
-rw-r--r--drivers/ata/pata_jmicron.c1
-rw-r--r--drivers/ata/pata_legacy.c1
-rw-r--r--drivers/ata/pata_marvell.c1
-rw-r--r--drivers/ata/pata_mpiix.c1
-rw-r--r--drivers/ata/pata_netcell.c1
-rw-r--r--drivers/ata/pata_ninja32.c1
-rw-r--r--drivers/ata/pata_ns87410.c1
-rw-r--r--drivers/ata/pata_ns87415.c1
-rw-r--r--drivers/ata/pata_oldpiix.c1
-rw-r--r--drivers/ata/pata_opti.c1
-rw-r--r--drivers/ata/pata_optidma.c1
-rw-r--r--drivers/ata/pata_pcmcia.c1
-rw-r--r--drivers/ata/pata_pdc2027x.c1
-rw-r--r--drivers/ata/pata_pdc202xx_old.c1
-rw-r--r--drivers/ata/pata_piccolo.c1
-rw-r--r--drivers/ata/pata_platform.c1
-rw-r--r--drivers/ata/pata_pxa.c1
-rw-r--r--drivers/ata/pata_radisys.c1
-rw-r--r--drivers/ata/pata_rdc.c1
-rw-r--r--drivers/ata/pata_rz1000.c1
-rw-r--r--drivers/ata/pata_sc1200.c1
-rw-r--r--drivers/ata/pata_scc.c1
-rw-r--r--drivers/ata/pata_sch.c1
-rw-r--r--drivers/ata/pata_serverworks.c1
-rw-r--r--drivers/ata/pata_sil680.c1
-rw-r--r--drivers/ata/pata_sis.c1
-rw-r--r--drivers/ata/pata_sl82c105.c1
-rw-r--r--drivers/ata/pata_triflex.c1
-rw-r--r--drivers/ata/pata_via.c1
-rw-r--r--drivers/ata/pdc_adma.c1
-rw-r--r--drivers/ata/sata_dwc_460ex.c4
-rw-r--r--drivers/ata/sata_highbank.c6
-rw-r--r--drivers/ata/sata_nv.c1
-rw-r--r--drivers/ata/sata_promise.c1
-rw-r--r--drivers/ata/sata_qstor.c1
-rw-r--r--drivers/ata/sata_sil.c1
-rw-r--r--drivers/ata/sata_sis.c1
-rw-r--r--drivers/ata/sata_svw.c1
-rw-r--r--drivers/ata/sata_sx4.c10
-rw-r--r--drivers/ata/sata_uli.c1
-rw-r--r--drivers/ata/sata_via.c1
-rw-r--r--drivers/ata/sata_vsc.c1
-rw-r--r--drivers/scsi/libsas/sas_ata.c35
-rw-r--r--include/linux/ahci_platform.h28
-rw-r--r--include/linux/libata.h11
-rw-r--r--include/scsi/libsas.h1
92 files changed, 2249 insertions, 836 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 89de1564950c..48b285ffa3a6 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -4,17 +4,33 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
-- compatible : compatible list, contains "snps,spear-ahci"
+- compatible : compatible list, one of "snps,spear-ahci",
+ "snps,exynos5440-ahci", "ibm,476gtr-ahci",
+ "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci"
+ "fsl,imx6q-ahci" or "snps,dwc-ahci"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
Optional properties:
- dma-coherent : Present if dma operations are coherent
+- clocks : a list of phandle + clock specifier pairs
+- target-supply : regulator for SATA target power
-Example:
+"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties:
+- clocks : must contain the sata, sata_ref and ahb clocks
+- clock-names : must contain "ahb" for the ahb clock
+
+Examples:
sata@ffe08000 {
compatible = "snps,spear-ahci";
reg = <0xffe08000 0x1000>;
interrupts = <115>;
-
};
+
+ ahci: sata@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <56>;
+ clocks = <&pll6 0>, <&ahb_gates 25>;
+ target-supply = <&reg_ahci_5v>;
+ };
diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt
new file mode 100644
index 000000000000..7bcfbf59810e
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt
@@ -0,0 +1,76 @@
+* APM X-Gene 6.0 Gb/s SATA host controller nodes
+
+SATA host controller nodes are defined to describe on-chip Serial ATA
+controllers. Each SATA controller (pair of ports) have its own node.
+
+Required properties:
+- compatible : Shall contain:
+ * "apm,xgene-ahci"
+- reg : First memory resource shall be the AHCI memory
+ resource.
+ Second memory resource shall be the host controller
+ core memory resource.
+ Third memory resource shall be the host controller
+ diagnostic memory resource.
+ 4th memory resource shall be the host controller
+ AXI memory resource.
+ 5th optional memory resource shall be the host
+ controller MUX memory resource if required.
+- interrupts : Interrupt-specifier for SATA host controller IRQ.
+- clocks : Reference to the clock entry.
+- phys : A list of phandles + phy-specifiers, one for each
+ entry in phy-names.
+- phy-names : Should contain:
+ * "sata-phy" for the SATA 6.0Gbps PHY
+
+Optional properties:
+- status : Shall be "ok" if enabled or "disabled" if disabled.
+ Default is "ok".
+
+Example:
+ sataclk: sataclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sataclk";
+ };
+
+ phy2: phy@1f22a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f22a000 0x0 0x100>;
+ #phy-cells = <1>;
+ };
+
+ phy3: phy@1f23a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f23a000 0x0 0x100>;
+ #phy-cells = <1>;
+ };
+
+ sata2: sata@1a400000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x1000>,
+ <0x0 0x1f22d000 0x0 0x1000>,
+ <0x0 0x1f22e000 0x0 0x1000>,
+ <0x0 0x1f227000 0x0 0x1000>;
+ interrupts = <0x0 0x87 0x4>;
+ status = "ok";
+ clocks = <&sataclk 0>;
+ phys = <&phy2 0>;
+ phy-names = "sata-phy";
+ };
+
+ sata3: sata@1a800000 {
+ compatible = "apm,xgene-ahci-pcie";
+ reg = <0x0 0x1a800000 0x0 0x1000>,
+ <0x0 0x1f230000 0x0 0x1000>,
+ <0x0 0x1f23d000 0x0 0x1000>,
+ <0x0 0x1f23e000 0x0 0x1000>,
+ <0x0 0x1f237000 0x0 0x1000>;
+ interrupts = <0x0 0x88 0x4>;
+ status = "ok";
+ clocks = <&sataclk 0>;
+ phys = <&phy3 0>;
+ phy-names = "sata-phy";
+ };
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 2ab00434b2eb..85399c98f84a 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -472,7 +472,7 @@ static struct clk_lookup da850_clks[] = {
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("vpif", NULL, &vpif_clk),
- CLK("ahci", NULL, &sata_clk),
+ CLK("ahci_da850", NULL, &sata_clk),
CLK("davinci-rproc.0", NULL, &dsp_clk),
CLK("ehrpwm", "fck", &ehrpwm_clk),
CLK("ehrpwm", "tbclk", &ehrpwm_tbclk),
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 0486cdf28c8d..56ea41d5f849 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -1020,7 +1020,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
}
#ifdef CONFIG_ARCH_DAVINCI_DA850
-
static struct resource da850_sata_resources[] = {
{
.start = DA850_SATA_BASE,
@@ -1028,103 +1027,22 @@ static struct resource da850_sata_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG,
+ .end = DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
.start = IRQ_DA850_SATAINT,
.flags = IORESOURCE_IRQ,
},
};
-/* SATA PHY Control Register offset from AHCI base */
-#define SATA_P0PHYCR_REG 0x178
-
-#define SATA_PHY_MPY(x) ((x) << 0)
-#define SATA_PHY_LOS(x) ((x) << 6)
-#define SATA_PHY_RXCDR(x) ((x) << 10)
-#define SATA_PHY_RXEQ(x) ((x) << 13)
-#define SATA_PHY_TXSWING(x) ((x) << 19)
-#define SATA_PHY_ENPLL(x) ((x) << 31)
-
-static struct clk *da850_sata_clk;
-static unsigned long da850_sata_refclkpn;
-
-/* Supported DA850 SATA crystal frequencies */
-#define KHZ_TO_HZ(freq) ((freq) * 1000)
-static unsigned long da850_sata_xtal[] = {
- KHZ_TO_HZ(300000),
- KHZ_TO_HZ(250000),
- 0, /* Reserved */
- KHZ_TO_HZ(187500),
- KHZ_TO_HZ(150000),
- KHZ_TO_HZ(125000),
- KHZ_TO_HZ(120000),
- KHZ_TO_HZ(100000),
- KHZ_TO_HZ(75000),
- KHZ_TO_HZ(60000),
-};
-
-static int da850_sata_init(struct device *dev, void __iomem *addr)
-{
- int i, ret;
- unsigned int val;
-
- da850_sata_clk = clk_get(dev, NULL);
- if (IS_ERR(da850_sata_clk))
- return PTR_ERR(da850_sata_clk);
-
- ret = clk_prepare_enable(da850_sata_clk);
- if (ret)
- goto err0;
-
- /* Enable SATA clock receiver */
- val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
- val &= ~BIT(0);
- __raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-
- /* Get the multiplier needed for 1.5GHz PLL output */
- for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
- if (da850_sata_xtal[i] == da850_sata_refclkpn)
- break;
-
- if (i == ARRAY_SIZE(da850_sata_xtal)) {
- ret = -EINVAL;
- goto err1;
- }
-
- val = SATA_PHY_MPY(i + 1) |
- SATA_PHY_LOS(1) |
- SATA_PHY_RXCDR(4) |
- SATA_PHY_RXEQ(1) |
- SATA_PHY_TXSWING(3) |
- SATA_PHY_ENPLL(1);
-
- __raw_writel(val, addr + SATA_P0PHYCR_REG);
-
- return 0;
-
-err1:
- clk_disable_unprepare(da850_sata_clk);
-err0:
- clk_put(da850_sata_clk);
- return ret;
-}
-
-static void da850_sata_exit(struct device *dev)
-{
- clk_disable_unprepare(da850_sata_clk);
- clk_put(da850_sata_clk);
-}
-
-static struct ahci_platform_data da850_sata_pdata = {
- .init = da850_sata_init,
- .exit = da850_sata_exit,
-};
-
static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
static struct platform_device da850_sata_device = {
- .name = "ahci",
+ .name = "ahci_da850",
.id = -1,
.dev = {
- .platform_data = &da850_sata_pdata,
.dma_mask = &da850_sata_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
@@ -1134,9 +1052,8 @@ static struct platform_device da850_sata_device = {
int __init da850_register_sata(unsigned long refclkpn)
{
- da850_sata_refclkpn = refclkpn;
- if (!da850_sata_refclkpn)
- return -EINVAL;
+ /* please see comment in drivers/ata/ahci_da850.c */
+ BUG_ON(refclkpn != 100 * 1000 * 1000);
return platform_device_register(&da850_sata_device);
}
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index d37d7369e260..93f4b2dd9248 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -176,6 +176,87 @@
reg-names = "csr-reg";
clock-output-names = "eth8clk";
};
+
+ sataphy1clk: sataphy1clk@1f21c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f21c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sataphy1clk";
+ status = "disabled";
+ csr-offset = <0x4>;
+ csr-mask = <0x00>;
+ enable-offset = <0x0>;
+ enable-mask = <0x06>;
+ };
+
+ sataphy2clk: sataphy1clk@1f22c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f22c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sataphy2clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3a>;
+ enable-offset = <0x0>;
+ enable-mask = <0x06>;
+ };
+
+ sataphy3clk: sataphy1clk@1f23c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f23c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sataphy3clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3a>;
+ enable-offset = <0x0>;
+ enable-mask = <0x06>;
+ };
+
+ sata01clk: sata01clk@1f21c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f21c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata01clk";
+ csr-offset = <0x4>;
+ csr-mask = <0x05>;
+ enable-offset = <0x0>;
+ enable-mask = <0x39>;
+ };
+
+ sata23clk: sata23clk@1f22c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f22c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata23clk";
+ csr-offset = <0x4>;
+ csr-mask = <0x05>;
+ enable-offset = <0x0>;
+ enable-mask = <0x39>;
+ };
+
+ sata45clk: sata45clk@1f23c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f23c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata45clk";
+ csr-offset = <0x4>;
+ csr-mask = <0x05>;
+ enable-offset = <0x0>;
+ enable-mask = <0x39>;
+ };
};
serial0: serial@1c020000 {
@@ -187,5 +268,76 @@
interrupt-parent = <&gic>;
interrupts = <0x0 0x4c 0x4>;
};
+
+ phy1: phy@1f21a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f21a000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&sataphy1clk 0>;
+ status = "disabled";
+ apm,tx-boost-gain = <30 30 30 30 30 30>;
+ apm,tx-eye-tuning = <2 10 10 2 10 10>;
+ };
+
+ phy2: phy@1f22a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f22a000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&sataphy2clk 0>;
+ status = "ok";
+ apm,tx-boost-gain = <30 30 30 30 30 30>;
+ apm,tx-eye-tuning = <1 10 10 2 10 10>;
+ };
+
+ phy3: phy@1f23a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f23a000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&sataphy3clk 0>;
+ status = "ok";
+ apm,tx-boost-gain = <31 31 31 31 31 31>;
+ apm,tx-eye-tuning = <2 10 10 2 10 10>;
+ };
+
+ sata1: sata@1a000000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a000000 0x0 0x1000>,
+ <0x0 0x1f210000 0x0 0x1000>,
+ <0x0 0x1f21d000 0x0 0x1000>,
+ <0x0 0x1f21e000 0x0 0x1000>,
+ <0x0 0x1f217000 0x0 0x1000>;
+ interrupts = <0x0 0x86 0x4>;
+ status = "disabled";
+ clocks = <&sata01clk 0>;
+ phys = <&phy1 0>;
+ phy-names = "sata-phy";
+ };
+
+ sata2: sata@1a400000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x1000>,
+ <0x0 0x1f22d000 0x0 0x1000>,
+ <0x0 0x1f22e000 0x0 0x1000>,
+ <0x0 0x1f227000 0x0 0x1000>;
+ interrupts = <0x0 0x87 0x4>;
+ status = "ok";
+ clocks = <&sata23clk 0>;
+ phys = <&phy2 0>;
+ phy-names = "sata-phy";
+ };
+
+ sata3: sata@1a800000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a800000 0x0 0x1000>,
+ <0x0 0x1f230000 0x0 0x1000>,
+ <0x0 0x1f23d000 0x0 0x1000>,
+ <0x0 0x1f23e000 0x0 0x1000>;
+ interrupts = <0x0 0x88 0x4>;
+ status = "ok";
+ clocks = <&sata45clk 0>;
+ phys = <&phy3 0>;
+ phy-names = "sata-phy";
+ };
};
};
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 868429a47be4..20e03a7eb8b4 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -11,13 +11,13 @@ config HAVE_PATA_PLATFORM
to update the PATA_PLATFORM entry.
menuconfig ATA
- tristate "Serial ATA and Parallel ATA drivers"
+ tristate "Serial ATA and Parallel ATA drivers (libata)"
depends on HAS_IOMEM
depends on BLOCK
depends on !(M32R || M68K || S390) || BROKEN
select SCSI
---help---
- If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
+ If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
any other ATA device under Linux, say Y and make sure that you know
the name of your ATA host adapter (the card inside your computer
that "speaks" the ATA protocol, also called ATA controller),
@@ -60,7 +60,7 @@ config ATA_ACPI
config SATA_ZPODD
bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
- depends on ATA_ACPI
+ depends on ATA_ACPI && PM_RUNTIME
default n
help
This option adds support for SATA Zero Power Optical Disc
@@ -97,15 +97,48 @@ config SATA_AHCI_PLATFORM
If unsure, say N.
+config AHCI_DA850
+ tristate "DaVinci DA850 AHCI SATA support"
+ depends on ARCH_DAVINCI_DA850
+ help
+ This option enables support for the DaVinci DA850 SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_ST
+ tristate "ST AHCI SATA support"
+ depends on ARCH_STI
+ help
+ This option enables support for ST AHCI SATA controller.
+
+ If unsure, say N.
+
config AHCI_IMX
tristate "Freescale i.MX AHCI SATA support"
- depends on SATA_AHCI_PLATFORM && MFD_SYSCON
+ depends on MFD_SYSCON
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
If unsure, say N.
+config AHCI_SUNXI
+ tristate "Allwinner sunxi AHCI SATA support"
+ depends on ARCH_SUNXI
+ help
+ This option enables support for the Allwinner sunxi SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
+config AHCI_XGENE
+ tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
+ depends on ARM64 || COMPILE_TEST
+ select PHY_XGENE
+ help
+ This option enables support for APM X-Gene SoC SATA host controller.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
@@ -239,6 +272,7 @@ config SATA_DWC_VDEBUG
config SATA_HIGHBANK
tristate "Calxeda Highbank SATA support"
+ depends on ARCH_HIGHBANK || COMPILE_TEST
help
This option enables support for the Calxeda Highbank SoC's
onboard SATA.
@@ -247,6 +281,8 @@ config SATA_HIGHBANK
config SATA_MV
tristate "Marvell SATA support"
+ depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
+ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
select GENERIC_PHY
help
This option enables support for the Marvell Serial ATA family.
@@ -273,6 +309,7 @@ config SATA_PROMISE
config SATA_RCAR
tristate "Renesas R-Car SATA support"
+ depends on ARCH_SHMOBILE || COMPILE_TEST
help
This option enables support for Renesas R-Car Serial ATA.
@@ -352,6 +389,7 @@ config PATA_AMD
config PATA_ARASAN_CF
tristate "ARASAN CompactFlash PATA Controller Support"
+ depends on ARCH_SPEAR13XX || COMPILE_TEST
depends on DMADEVICES
select DMA_ENGINE
help
@@ -403,7 +441,7 @@ config PATA_CMD64X
config PATA_CS5520
tristate "CS5510/5520 PATA support"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
This option enables support for the Cyrix 5510/5520
companion chip used with the MediaGX/Geode processor family.
@@ -412,7 +450,7 @@ config PATA_CS5520
config PATA_CS5530
tristate "CS5530 PATA support"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
This option enables support for the Cyrix/NatSemi/AMD CS5530
companion chip used with the MediaGX/Geode processor family.
@@ -421,7 +459,7 @@ config PATA_CS5530
config PATA_CS5535
tristate "CS5535 PATA support (Experimental)"
- depends on PCI && X86 && !X86_64
+ depends on PCI && X86_32
help
This option enables support for the NatSemi/AMD CS5535
companion chip used with the Geode processor family.
@@ -430,7 +468,7 @@ config PATA_CS5535
config PATA_CS5536
tristate "CS5536 PATA support"
- depends on PCI
+ depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
help
This option enables support for the AMD CS5536
companion chip used with the Geode LX processor family.
@@ -666,7 +704,7 @@ config PATA_RDC
config PATA_SC1200
tristate "SC1200 PATA support"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
This option enables support for the NatSemi/AMD SC1200 SoC
companion chip used with the Geode processor family.
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 46518c622460..44c8016e565c 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -4,13 +4,17 @@ obj-$(CONFIG_ATA) += libata.o
# non-SFF interface
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o
-obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
+obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
-obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
+obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index fd665d919df2..b51605ac5974 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -36,7 +36,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c81d809c111b..a52a5b662f35 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -35,7 +35,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
@@ -578,6 +577,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
bool online;
int rc;
@@ -588,7 +588,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
@@ -603,6 +603,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
{
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -618,7 +619,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* The pseudo configuration device on SIMG4726 attached to
* ASUS P5W-DH Deluxe doesn't send signature FIS after
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 2289efdf8203..51af275b3388 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,8 @@
#include <linux/clk.h>
#include <linux/libata.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
/* Enclosure Management Control */
#define EM_CTRL_MSG_TYPE 0x000f0000
@@ -51,6 +53,7 @@
enum {
AHCI_MAX_PORTS = 32,
+ AHCI_MAX_CLKS = 3,
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_MAX_CMDS = 32,
@@ -321,8 +324,17 @@ struct ahci_host_priv {
u32 em_loc; /* enclosure management location */
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
- struct clk *clk; /* Only for platforms supporting clk */
+ bool got_runtime_pm; /* Did we do pm_runtime_get? */
+ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
+ struct regulator *target_pwr; /* Optional */
+ struct phy *phy; /* If platform uses phy */
void *plat_data; /* Other platform data */
+ /*
+ * Optional ahci_start_engine override, if not set this gets set to the
+ * default ahci_start_engine during ahci_save_initial_config, this can
+ * be overridden anytime before the host is activated.
+ */
+ void (*start_engine)(struct ata_port *ap);
};
extern int ahci_ignore_sss;
diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
new file mode 100644
index 000000000000..2c83613ce2db
--- /dev/null
+++ b/drivers/ata/ahci_da850.c
@@ -0,0 +1,114 @@
+/*
+ * DaVinci DA850 AHCI SATA platform driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+/* SATA PHY Control Register offset from AHCI base */
+#define SATA_P0PHYCR_REG 0x178
+
+#define SATA_PHY_MPY(x) ((x) << 0)
+#define SATA_PHY_LOS(x) ((x) << 6)
+#define SATA_PHY_RXCDR(x) ((x) << 10)
+#define SATA_PHY_RXEQ(x) ((x) << 13)
+#define SATA_PHY_TXSWING(x) ((x) << 19)
+#define SATA_PHY_ENPLL(x) ((x) << 31)
+
+/*
+ * The multiplier needed for 1.5GHz PLL output.
+ *
+ * NOTE: This is currently hardcoded to be suitable for 100MHz crystal
+ * frequency (which is used by DA850 EVM board) and may need to be changed
+ * if you would like to use this driver on some other board.
+ */
+#define DA850_SATA_CLK_MULTIPLIER 7
+
+static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg,
+ void __iomem *ahci_base)
+{
+ unsigned int val;
+
+ /* Enable SATA clock receiver */
+ val = readl(pwrdn_reg);
+ val &= ~BIT(0);
+ writel(val, pwrdn_reg);
+
+ val = SATA_PHY_MPY(DA850_SATA_CLK_MULTIPLIER + 1) | SATA_PHY_LOS(1) |
+ SATA_PHY_RXCDR(4) | SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) |
+ SATA_PHY_ENPLL(1);
+
+ writel(val, ahci_base + SATA_P0PHYCR_REG);
+}
+
+static const struct ata_port_info ahci_da850_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
+static int ahci_da850_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct resource *res;
+ void __iomem *pwrdn_reg;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res)
+ goto disable_resources;
+
+ pwrdn_reg = devm_ioremap(dev, res->start, resource_size(res));
+ if (!pwrdn_reg)
+ goto disable_resources;
+
+ da850_sata_init(dev, pwrdn_reg, hpriv->mmio);
+
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, 0, 0);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
+ ahci_platform_resume);
+
+static struct platform_driver ahci_da850_driver = {
+ .probe = ahci_da850_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = "ahci_da850",
+ .owner = THIS_MODULE,
+ .pm = &ahci_da850_pm_ops,
+ },
+};
+module_platform_driver(ahci_da850_driver);
+
+MODULE_DESCRIPTION("DaVinci DA850 AHCI SATA platform driver");
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index dd4d6f74d7bd..497c7abe1c7d 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -42,13 +42,7 @@ enum ahci_imx_type {
struct imx_ahci_priv {
struct platform_device *ahci_pdev;
enum ahci_imx_type type;
-
- /* i.MX53 clock */
- struct clk *sata_gate_clk;
- /* Common clock */
- struct clk *sata_ref_clk;
struct clk *ahb_clk;
-
struct regmap *gpr;
bool no_device;
bool first_time;
@@ -58,28 +52,52 @@ static int ahci_imx_hotplug;
module_param_named(hotplug, ahci_imx_hotplug, int, 0644);
MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)");
-static int imx_sata_clock_enable(struct device *dev)
+static void ahci_imx_host_stop(struct ata_host *host);
+
+static int imx_sata_enable(struct ahci_host_priv *hpriv)
{
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
int ret;
- if (imxpriv->type == AHCI_IMX53) {
- ret = clk_prepare_enable(imxpriv->sata_gate_clk);
- if (ret < 0) {
- dev_err(dev, "prepare-enable sata_gate clock err:%d\n",
- ret);
+ if (imxpriv->no_device)
+ return 0;
+
+ if (hpriv->target_pwr) {
+ ret = regulator_enable(hpriv->target_pwr);
+ if (ret)
return ret;
- }
}
- ret = clk_prepare_enable(imxpriv->sata_ref_clk);
- if (ret < 0) {
- dev_err(dev, "prepare-enable sata_ref clock err:%d\n",
- ret);
- goto clk_err;
- }
+ ret = ahci_platform_enable_clks(hpriv);
+ if (ret < 0)
+ goto disable_regulator;
if (imxpriv->type == AHCI_IMX6Q) {
+ /*
+ * set PHY Paremeters, two steps to configure the GPR13,
+ * one write for rest of parameters, mask of first write
+ * is 0x07ffffff, and the other one write for setting
+ * the mpll_clk_en.
+ */
+ regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
+ IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK |
+ IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK |
+ IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK |
+ IMX6Q_GPR13_SATA_SPD_MODE_MASK |
+ IMX6Q_GPR13_SATA_MPLL_SS_EN |
+ IMX6Q_GPR13_SATA_TX_ATTEN_MASK |
+ IMX6Q_GPR13_SATA_TX_BOOST_MASK |
+ IMX6Q_GPR13_SATA_TX_LVL_MASK |
+ IMX6Q_GPR13_SATA_MPLL_CLK_EN |
+ IMX6Q_GPR13_SATA_TX_EDGE_RATE,
+ IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB |
+ IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M |
+ IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F |
+ IMX6Q_GPR13_SATA_SPD_MODE_3P0G |
+ IMX6Q_GPR13_SATA_MPLL_SS_EN |
+ IMX6Q_GPR13_SATA_TX_ATTEN_9_16 |
+ IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB |
+ IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
IMX6Q_GPR13_SATA_MPLL_CLK_EN,
IMX6Q_GPR13_SATA_MPLL_CLK_EN);
@@ -89,15 +107,19 @@ static int imx_sata_clock_enable(struct device *dev)
return 0;
-clk_err:
- if (imxpriv->type == AHCI_IMX53)
- clk_disable_unprepare(imxpriv->sata_gate_clk);
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+
return ret;
}
-static void imx_sata_clock_disable(struct device *dev)
+static void imx_sata_disable(struct ahci_host_priv *hpriv)
{
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
+
+ if (imxpriv->no_device)
+ return;
if (imxpriv->type == AHCI_IMX6Q) {
regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
@@ -105,10 +127,10 @@ static void imx_sata_clock_disable(struct device *dev)
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
}
- clk_disable_unprepare(imxpriv->sata_ref_clk);
+ ahci_platform_disable_clks(hpriv);
- if (imxpriv->type == AHCI_IMX53)
- clk_disable_unprepare(imxpriv->sata_gate_clk);
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
}
static void ahci_imx_error_handler(struct ata_port *ap)
@@ -118,7 +140,7 @@ static void ahci_imx_error_handler(struct ata_port *ap)
struct ata_host *host = dev_get_drvdata(ap->dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(ap->dev->parent);
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
ahci_error_handler(ap);
@@ -136,7 +158,7 @@ static void ahci_imx_error_handler(struct ata_port *ap)
*/
reg_val = readl(mmio + PORT_PHY_CTL);
writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL);
- imx_sata_clock_disable(ap->dev);
+ imx_sata_disable(hpriv);
imxpriv->no_device = true;
}
@@ -144,7 +166,9 @@ static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(ap->dev->parent);
+ struct ata_host *host = dev_get_drvdata(ap->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
int ret = -EIO;
if (imxpriv->type == AHCI_IMX53)
@@ -156,7 +180,8 @@ static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
}
static struct ata_port_operations ahci_imx_ops = {
- .inherits = &ahci_platform_ops,
+ .inherits = &ahci_ops,
+ .host_stop = ahci_imx_host_stop,
.error_handler = ahci_imx_error_handler,
.softreset = ahci_imx_softreset,
};
@@ -168,79 +193,6 @@ static const struct ata_port_info ahci_imx_port_info = {
.port_ops = &ahci_imx_ops,
};
-static int imx_sata_init(struct device *dev, void __iomem *mmio)
-{
- int ret = 0;
- unsigned int reg_val;
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
-
- ret = imx_sata_clock_enable(dev);
- if (ret < 0)
- return ret;
-
- /*
- * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
- * and IP vendor specific register HOST_TIMER1MS.
- * Configure CAP_SSS (support stagered spin up).
- * Implement the port0.
- * Get the ahb clock rate, and configure the TIMER1MS register.
- */
- reg_val = readl(mmio + HOST_CAP);
- if (!(reg_val & HOST_CAP_SSS)) {
- reg_val |= HOST_CAP_SSS;
- writel(reg_val, mmio + HOST_CAP);
- }
- reg_val = readl(mmio + HOST_PORTS_IMPL);
- if (!(reg_val & 0x1)) {
- reg_val |= 0x1;
- writel(reg_val, mmio + HOST_PORTS_IMPL);
- }
-
- reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
- writel(reg_val, mmio + HOST_TIMER1MS);
-
- return 0;
-}
-
-static void imx_sata_exit(struct device *dev)
-{
- imx_sata_clock_disable(dev);
-}
-
-static int imx_ahci_suspend(struct device *dev)
-{
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
-
- /*
- * If no_device is set, The CLKs had been gated off in the
- * initialization so don't do it again here.
- */
- if (!imxpriv->no_device)
- imx_sata_clock_disable(dev);
-
- return 0;
-}
-
-static int imx_ahci_resume(struct device *dev)
-{
- struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
- int ret = 0;
-
- if (!imxpriv->no_device)
- ret = imx_sata_clock_enable(dev);
-
- return ret;
-}
-
-static struct ahci_platform_data imx_sata_pdata = {
- .init = imx_sata_init,
- .exit = imx_sata_exit,
- .ata_port_info = &ahci_imx_port_info,
- .suspend = imx_ahci_suspend,
- .resume = imx_ahci_resume,
-
-};
-
static const struct of_device_id imx_ahci_of_match[] = {
{ .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 },
{ .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q },
@@ -251,151 +203,124 @@ MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
static int imx_ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct resource *mem, *irq, res[2];
const struct of_device_id *of_id;
- enum ahci_imx_type type;
- const struct ahci_platform_data *pdata = NULL;
+ struct ahci_host_priv *hpriv;
struct imx_ahci_priv *imxpriv;
- struct device *ahci_dev;
- struct platform_device *ahci_pdev;
+ unsigned int reg_val;
int ret;
of_id = of_match_device(imx_ahci_of_match, dev);
if (!of_id)
return -EINVAL;
- type = (enum ahci_imx_type)of_id->data;
- pdata = &imx_sata_pdata;
-
imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
- if (!imxpriv) {
- dev_err(dev, "can't alloc ahci_host_priv\n");
+ if (!imxpriv)
return -ENOMEM;
- }
-
- ahci_pdev = platform_device_alloc("ahci", -1);
- if (!ahci_pdev)
- return -ENODEV;
-
- ahci_dev = &ahci_pdev->dev;
- ahci_dev->parent = dev;
imxpriv->no_device = false;
imxpriv->first_time = true;
- imxpriv->type = type;
-
+ imxpriv->type = (enum ahci_imx_type)of_id->data;
imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
if (IS_ERR(imxpriv->ahb_clk)) {
dev_err(dev, "can't get ahb clock.\n");
- ret = PTR_ERR(imxpriv->ahb_clk);
- goto err_out;
+ return PTR_ERR(imxpriv->ahb_clk);
}
- if (type == AHCI_IMX53) {
- imxpriv->sata_gate_clk = devm_clk_get(dev, "sata_gate");
- if (IS_ERR(imxpriv->sata_gate_clk)) {
- dev_err(dev, "can't get sata_gate clock.\n");
- ret = PTR_ERR(imxpriv->sata_gate_clk);
- goto err_out;
+ if (imxpriv->type == AHCI_IMX6Q) {
+ imxpriv->gpr = syscon_regmap_lookup_by_compatible(
+ "fsl,imx6q-iomuxc-gpr");
+ if (IS_ERR(imxpriv->gpr)) {
+ dev_err(dev,
+ "failed to find fsl,imx6q-iomux-gpr regmap\n");
+ return PTR_ERR(imxpriv->gpr);
}
}
- imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
- if (IS_ERR(imxpriv->sata_ref_clk)) {
- dev_err(dev, "can't get sata_ref clock.\n");
- ret = PTR_ERR(imxpriv->sata_ref_clk);
- goto err_out;
- }
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ hpriv->plat_data = imxpriv;
- imxpriv->ahci_pdev = ahci_pdev;
- platform_set_drvdata(pdev, imxpriv);
+ ret = imx_sata_enable(hpriv);
+ if (ret)
+ return ret;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!mem || !irq) {
- dev_err(dev, "no mmio/irq resource\n");
- ret = -ENOMEM;
- goto err_out;
+ /*
+ * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
+ * and IP vendor specific register HOST_TIMER1MS.
+ * Configure CAP_SSS (support stagered spin up).
+ * Implement the port0.
+ * Get the ahb clock rate, and configure the TIMER1MS register.
+ */
+ reg_val = readl(hpriv->mmio + HOST_CAP);
+ if (!(reg_val & HOST_CAP_SSS)) {
+ reg_val |= HOST_CAP_SSS;
+ writel(reg_val, hpriv->mmio + HOST_CAP);
+ }
+ reg_val = readl(hpriv->mmio + HOST_PORTS_IMPL);
+ if (!(reg_val & 0x1)) {
+ reg_val |= 0x1;
+ writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL);
}
- res[0] = *mem;
- res[1] = *irq;
+ reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
+ writel(reg_val, hpriv->mmio + HOST_TIMER1MS);
- ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32);
- ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask;
- ahci_dev->of_node = dev->of_node;
+ ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info, 0, 0);
+ if (ret)
+ imx_sata_disable(hpriv);
- if (type == AHCI_IMX6Q) {
- imxpriv->gpr = syscon_regmap_lookup_by_compatible(
- "fsl,imx6q-iomuxc-gpr");
- if (IS_ERR(imxpriv->gpr)) {
- dev_err(dev,
- "failed to find fsl,imx6q-iomux-gpr regmap\n");
- ret = PTR_ERR(imxpriv->gpr);
- goto err_out;
- }
+ return ret;
+}
- /*
- * Set PHY Paremeters, two steps to configure the GPR13,
- * one write for rest of parameters, mask of first write
- * is 0x07fffffe, and the other one write for setting
- * the mpll_clk_en happens in imx_sata_clock_enable().
- */
- regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
- IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK |
- IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK |
- IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK |
- IMX6Q_GPR13_SATA_SPD_MODE_MASK |
- IMX6Q_GPR13_SATA_MPLL_SS_EN |
- IMX6Q_GPR13_SATA_TX_ATTEN_MASK |
- IMX6Q_GPR13_SATA_TX_BOOST_MASK |
- IMX6Q_GPR13_SATA_TX_LVL_MASK |
- IMX6Q_GPR13_SATA_MPLL_CLK_EN |
- IMX6Q_GPR13_SATA_TX_EDGE_RATE,
- IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB |
- IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M |
- IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F |
- IMX6Q_GPR13_SATA_SPD_MODE_3P0G |
- IMX6Q_GPR13_SATA_MPLL_SS_EN |
- IMX6Q_GPR13_SATA_TX_ATTEN_9_16 |
- IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB |
- IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
- }
+static void ahci_imx_host_stop(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
- ret = platform_device_add_resources(ahci_pdev, res, 2);
- if (ret)
- goto err_out;
+ imx_sata_disable(hpriv);
+}
- ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
- if (ret)
- goto err_out;
+#ifdef CONFIG_PM_SLEEP
+static int imx_ahci_suspend(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int ret;
- ret = platform_device_add(ahci_pdev);
- if (ret) {
-err_out:
- platform_device_put(ahci_pdev);
+ ret = ahci_platform_suspend_host(dev);
+ if (ret)
return ret;
- }
+
+ imx_sata_disable(hpriv);
return 0;
}
-static int imx_ahci_remove(struct platform_device *pdev)
+static int imx_ahci_resume(struct device *dev)
{
- struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev);
- struct platform_device *ahci_pdev = imxpriv->ahci_pdev;
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int ret;
- platform_device_unregister(ahci_pdev);
- return 0;
+ ret = imx_sata_enable(hpriv);
+ if (ret)
+ return ret;
+
+ return ahci_platform_resume_host(dev);
}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume);
static struct platform_driver imx_ahci_driver = {
.probe = imx_ahci_probe,
- .remove = imx_ahci_remove,
+ .remove = ata_platform_remove_one,
.driver = {
.name = "ahci-imx",
.owner = THIS_MODULE,
.of_match_table = imx_ahci_of_match,
+ .pm = &ahci_imx_pm_ops,
},
};
module_platform_driver(imx_ahci_driver);
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 4b231baceb09..ef67e79944f9 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -12,135 +12,36 @@
* any later version.
*/
-#include <linux/clk.h>
#include <linux/kernel.h>
-#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/pm.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include "ahci.h"
-static void ahci_host_stop(struct ata_host *host);
-
-enum ahci_type {
- AHCI, /* standard platform ahci */
- IMX53_AHCI, /* ahci on i.mx53 */
- STRICT_AHCI, /* delayed DMA engine start */
-};
-
-static struct platform_device_id ahci_devtype[] = {
- {
- .name = "ahci",
- .driver_data = AHCI,
- }, {
- .name = "imx53-ahci",
- .driver_data = IMX53_AHCI,
- }, {
- .name = "strict-ahci",
- .driver_data = STRICT_AHCI,
- }, {
- /* sentinel */
- }
-};
-MODULE_DEVICE_TABLE(platform, ahci_devtype);
-
-struct ata_port_operations ahci_platform_ops = {
- .inherits = &ahci_ops,
- .host_stop = ahci_host_stop,
-};
-EXPORT_SYMBOL_GPL(ahci_platform_ops);
-
-static struct ata_port_operations ahci_platform_retry_srst_ops = {
- .inherits = &ahci_pmp_retry_srst_ops,
- .host_stop = ahci_host_stop,
-};
-
-static const struct ata_port_info ahci_port_info[] = {
- /* by features */
- [AHCI] = {
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_platform_ops,
- },
- [IMX53_AHCI] = {
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_platform_retry_srst_ops,
- },
- [STRICT_AHCI] = {
- AHCI_HFLAGS (AHCI_HFLAG_DELAY_ENGINE),
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_platform_ops,
- },
-};
-
-static struct scsi_host_template ahci_platform_sht = {
- AHCI_SHT("ahci_platform"),
+static const struct ata_port_info ahci_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
};
static int ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev_get_platdata(dev);
- const struct platform_device_id *id = platform_get_device_id(pdev);
- struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
- const struct ata_port_info *ppi[] = { &pi, NULL };
struct ahci_host_priv *hpriv;
- struct ata_host *host;
- struct resource *mem;
- int irq;
- int n_ports;
- int i;
int rc;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(dev, "no mmio space\n");
- return -EINVAL;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "no irq\n");
- return -EINVAL;
- }
-
- if (pdata && pdata->ata_port_info)
- pi = *pdata->ata_port_info;
-
- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv) {
- dev_err(dev, "can't alloc ahci_host_priv\n");
- return -ENOMEM;
- }
-
- hpriv->flags |= (unsigned long)pi.private_data;
-
- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
- if (!hpriv->mmio) {
- dev_err(dev, "can't map %pR\n", mem);
- return -ENOMEM;
- }
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
- hpriv->clk = clk_get(dev, NULL);
- if (IS_ERR(hpriv->clk)) {
- dev_err(dev, "can't get clock\n");
- } else {
- rc = clk_prepare_enable(hpriv->clk);
- if (rc) {
- dev_err(dev, "clock prepare enable failed");
- goto free_clk;
- }
- }
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
/*
* Some platforms might need to prepare for mmio region access,
@@ -151,69 +52,10 @@ static int ahci_probe(struct platform_device *pdev)
if (pdata && pdata->init) {
rc = pdata->init(dev, hpriv->mmio);
if (rc)
- goto disable_unprepare_clk;
- }
-
- ahci_save_initial_config(dev, hpriv,
- pdata ? pdata->force_port_map : 0,
- pdata ? pdata->mask_port_map : 0);
-
- /* prepare host */
- if (hpriv->cap & HOST_CAP_NCQ)
- pi.flags |= ATA_FLAG_NCQ;
-
- if (hpriv->cap & HOST_CAP_PMP)
- pi.flags |= ATA_FLAG_PMP;
-
- ahci_set_em_messages(hpriv, &pi);
-
- /* CAP.NP sometimes indicate the index of the last enabled
- * port, at other times, that of the last possible port, so
- * determining the maximum port number requires looking at
- * both CAP.NP and port_map.
- */
- n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-
- host = ata_host_alloc_pinfo(dev, ppi, n_ports);
- if (!host) {
- rc = -ENOMEM;
- goto pdata_exit;
- }
-
- host->private_data = hpriv;
-
- if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
- host->flags |= ATA_HOST_PARALLEL_SCAN;
- else
- dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
-
- if (pi.flags & ATA_FLAG_EM)
- ahci_reset_em(host);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- ata_port_desc(ap, "mmio %pR", mem);
- ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
-
- /* set enclosure management message type */
- if (ap->flags & ATA_FLAG_EM)
- ap->em_message_type = hpriv->em_msg_type;
-
- /* disabled/not-implemented port */
- if (!(hpriv->port_map & (1 << i)))
- ap->ops = &ata_dummy_port_ops;
+ goto disable_resources;
}
- rc = ahci_reset_controller(host);
- if (rc)
- goto pdata_exit;
-
- ahci_init_controller(host);
- ahci_print_info(host, "platform");
-
- rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
- &ahci_platform_sht);
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info, 0, 0);
if (rc)
goto pdata_exit;
@@ -221,115 +63,19 @@ static int ahci_probe(struct platform_device *pdev)
pdata_exit:
if (pdata && pdata->exit)
pdata->exit(dev);
-disable_unprepare_clk:
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
-free_clk:
- if (!IS_ERR(hpriv->clk))
- clk_put(hpriv->clk);
- return rc;
-}
-
-static void ahci_host_stop(struct ata_host *host)
-{
- struct device *dev = host->dev;
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
-
- if (pdata && pdata->exit)
- pdata->exit(dev);
-
- if (!IS_ERR(hpriv->clk)) {
- clk_disable_unprepare(hpriv->clk);
- clk_put(hpriv->clk);
- }
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int ahci_suspend(struct device *dev)
-{
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = hpriv->mmio;
- u32 ctl;
- int rc;
-
- if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
- dev_err(dev, "firmware update required for suspend/resume\n");
- return -EIO;
- }
-
- /*
- * AHCI spec rev1.1 section 8.3.3:
- * Software must disable interrupts prior to requesting a
- * transition of the HBA to D3 state.
- */
- ctl = readl(mmio + HOST_CTL);
- ctl &= ~HOST_IRQ_EN;
- writel(ctl, mmio + HOST_CTL);
- readl(mmio + HOST_CTL); /* flush */
-
- rc = ata_host_suspend(host, PMSG_SUSPEND);
- if (rc)
- return rc;
-
- if (pdata && pdata->suspend)
- return pdata->suspend(dev);
-
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
-
- return 0;
-}
-
-static int ahci_resume(struct device *dev)
-{
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- int rc;
-
- if (!IS_ERR(hpriv->clk)) {
- rc = clk_prepare_enable(hpriv->clk);
- if (rc) {
- dev_err(dev, "clock prepare enable failed");
- return rc;
- }
- }
-
- if (pdata && pdata->resume) {
- rc = pdata->resume(dev);
- if (rc)
- goto disable_unprepare_clk;
- }
-
- if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_reset_controller(host);
- if (rc)
- goto disable_unprepare_clk;
-
- ahci_init_controller(host);
- }
-
- ata_host_resume(host);
-
- return 0;
-
-disable_unprepare_clk:
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
-
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
return rc;
}
-#endif
-static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+ ahci_platform_resume);
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
{ .compatible = "snps,exynos5440-ahci", },
{ .compatible = "ibm,476gtr-ahci", },
+ { .compatible = "snps,dwc-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
@@ -343,7 +89,6 @@ static struct platform_driver ahci_driver = {
.of_match_table = ahci_of_match,
.pm = &ahci_pm_ops,
},
- .id_table = ahci_devtype,
};
module_platform_driver(ahci_driver);
diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c
new file mode 100644
index 000000000000..633222226c19
--- /dev/null
+++ b/drivers/ata/ahci_st.c
@@ -0,0 +1,245 @@
+/*
+ * Copyright (C) 2012 STMicroelectronics Limited
+ *
+ * Authors: Francesco Virlinzi <francesco.virlinzi@st.com>
+ * Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/ahci_platform.h>
+#include <linux/libata.h>
+#include <linux/reset.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ahci.h"
+
+#define ST_AHCI_OOBR 0xbc
+#define ST_AHCI_OOBR_WE BIT(31)
+#define ST_AHCI_OOBR_CWMIN_SHIFT 24
+#define ST_AHCI_OOBR_CWMAX_SHIFT 16
+#define ST_AHCI_OOBR_CIMIN_SHIFT 8
+#define ST_AHCI_OOBR_CIMAX_SHIFT 0
+
+struct st_ahci_drv_data {
+ struct platform_device *ahci;
+ struct reset_control *pwr;
+ struct reset_control *sw_rst;
+ struct reset_control *pwr_rst;
+ struct ahci_host_priv *hpriv;
+};
+
+static void st_ahci_configure_oob(void __iomem *mmio)
+{
+ unsigned long old_val, new_val;
+
+ new_val = (0x02 << ST_AHCI_OOBR_CWMIN_SHIFT) |
+ (0x04 << ST_AHCI_OOBR_CWMAX_SHIFT) |
+ (0x08 << ST_AHCI_OOBR_CIMIN_SHIFT) |
+ (0x0C << ST_AHCI_OOBR_CIMAX_SHIFT);
+
+ old_val = readl(mmio + ST_AHCI_OOBR);
+ writel(old_val | ST_AHCI_OOBR_WE, mmio + ST_AHCI_OOBR);
+ writel(new_val | ST_AHCI_OOBR_WE, mmio + ST_AHCI_OOBR);
+ writel(new_val, mmio + ST_AHCI_OOBR);
+}
+
+static int st_ahci_deassert_resets(struct device *dev)
+{
+ struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
+ int err;
+
+ if (drv_data->pwr) {
+ err = reset_control_deassert(drv_data->pwr);
+ if (err) {
+ dev_err(dev, "unable to bring out of pwrdwn\n");
+ return err;
+ }
+ }
+
+ st_ahci_configure_oob(drv_data->hpriv->mmio);
+
+ if (drv_data->sw_rst) {
+ err = reset_control_deassert(drv_data->sw_rst);
+ if (err) {
+ dev_err(dev, "unable to bring out of sw-rst\n");
+ return err;
+ }
+ }
+
+ if (drv_data->pwr_rst) {
+ err = reset_control_deassert(drv_data->pwr_rst);
+ if (err) {
+ dev_err(dev, "unable to bring out of pwr-rst\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static void st_ahci_host_stop(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct device *dev = host->dev;
+ struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
+ int err;
+
+ if (drv_data->pwr) {
+ err = reset_control_assert(drv_data->pwr);
+ if (err)
+ dev_err(dev, "unable to pwrdwn\n");
+ }
+
+ ahci_platform_disable_resources(hpriv);
+}
+
+static int st_ahci_probe_resets(struct platform_device *pdev)
+{
+ struct st_ahci_drv_data *drv_data = platform_get_drvdata(pdev);
+
+ drv_data->pwr = devm_reset_control_get(&pdev->dev, "pwr-dwn");
+ if (IS_ERR(drv_data->pwr)) {
+ dev_info(&pdev->dev, "power reset control not defined\n");
+ drv_data->pwr = NULL;
+ }
+
+ drv_data->sw_rst = devm_reset_control_get(&pdev->dev, "sw-rst");
+ if (IS_ERR(drv_data->sw_rst)) {
+ dev_info(&pdev->dev, "soft reset control not defined\n");
+ drv_data->sw_rst = NULL;
+ }
+
+ drv_data->pwr_rst = devm_reset_control_get(&pdev->dev, "pwr-rst");
+ if (IS_ERR(drv_data->pwr_rst)) {
+ dev_dbg(&pdev->dev, "power soft reset control not defined\n");
+ drv_data->pwr_rst = NULL;
+ }
+
+ return st_ahci_deassert_resets(&pdev->dev);
+}
+
+static struct ata_port_operations st_ahci_port_ops = {
+ .inherits = &ahci_platform_ops,
+ .host_stop = st_ahci_host_stop,
+};
+
+static const struct ata_port_info st_ahci_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &st_ahci_port_ops,
+};
+
+static int st_ahci_probe(struct platform_device *pdev)
+{
+ struct st_ahci_drv_data *drv_data;
+ struct ahci_host_priv *hpriv;
+ int err;
+
+ drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL);
+ if (!drv_data)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, drv_data);
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ drv_data->hpriv = hpriv;
+
+ err = st_ahci_probe_resets(pdev);
+ if (err)
+ return err;
+
+ err = ahci_platform_enable_resources(hpriv);
+ if (err)
+ return err;
+
+ err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info, 0, 0);
+ if (err) {
+ ahci_platform_disable_resources(hpriv);
+ return err;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int st_ahci_suspend(struct device *dev)
+{
+ struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = drv_data->hpriv;
+ int err;
+
+ err = ahci_platform_suspend_host(dev);
+ if (err)
+ return err;
+
+ if (drv_data->pwr) {
+ err = reset_control_assert(drv_data->pwr);
+ if (err) {
+ dev_err(dev, "unable to pwrdwn");
+ return err;
+ }
+ }
+
+ ahci_platform_disable_resources(hpriv);
+
+ return 0;
+}
+
+static int st_ahci_resume(struct device *dev)
+{
+ struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = drv_data->hpriv;
+ int err;
+
+ err = ahci_platform_enable_resources(hpriv);
+ if (err)
+ return err;
+
+ err = st_ahci_deassert_resets(dev);
+ if (err) {
+ ahci_platform_disable_resources(hpriv);
+ return err;
+ }
+
+ return ahci_platform_resume_host(dev);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(st_ahci_pm_ops, st_ahci_suspend, st_ahci_resume);
+
+static struct of_device_id st_ahci_match[] = {
+ { .compatible = "st,ahci", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, st_ahci_match);
+
+static struct platform_driver st_ahci_driver = {
+ .driver = {
+ .name = "st_ahci",
+ .owner = THIS_MODULE,
+ .pm = &st_ahci_pm_ops,
+ .of_match_table = of_match_ptr(st_ahci_match),
+ },
+ .probe = st_ahci_probe,
+ .remove = ata_platform_remove_one,
+};
+module_platform_driver(st_ahci_driver);
+
+MODULE_AUTHOR("Alexandre Torgue <alexandre.torgue@st.com>");
+MODULE_AUTHOR("Francesco Virlinzi <francesco.virlinzi@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics SATA AHCI Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
new file mode 100644
index 000000000000..42d3f64e74b3
--- /dev/null
+++ b/drivers/ata/ahci_sunxi.c
@@ -0,0 +1,249 @@
+/*
+ * Allwinner sunxi AHCI SATA platform driver
+ * Copyright 2013 Olliver Schinagl <oliver@schinagl.nl>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ * Based on code from Allwinner Technology Co., Ltd. <www.allwinnertech.com>,
+ * Daniel Wang <danielwang@allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include "ahci.h"
+
+#define AHCI_BISTAFR 0x00a0
+#define AHCI_BISTCR 0x00a4
+#define AHCI_BISTFCTR 0x00a8
+#define AHCI_BISTSR 0x00ac
+#define AHCI_BISTDECR 0x00b0
+#define AHCI_DIAGNR0 0x00b4
+#define AHCI_DIAGNR1 0x00b8
+#define AHCI_OOBR 0x00bc
+#define AHCI_PHYCS0R 0x00c0
+#define AHCI_PHYCS1R 0x00c4
+#define AHCI_PHYCS2R 0x00c8
+#define AHCI_TIMER1MS 0x00e0
+#define AHCI_GPARAM1R 0x00e8
+#define AHCI_GPARAM2R 0x00ec
+#define AHCI_PPARAMR 0x00f0
+#define AHCI_TESTR 0x00f4
+#define AHCI_VERSIONR 0x00f8
+#define AHCI_IDR 0x00fc
+#define AHCI_RWCR 0x00fc
+#define AHCI_P0DMACR 0x0170
+#define AHCI_P0PHYCR 0x0178
+#define AHCI_P0PHYSR 0x017c
+
+static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ writel(reg_val, reg);
+}
+
+static void sunxi_setbits(void __iomem *reg, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
+{
+ return (readl(reg) >> shift) & mask;
+}
+
+static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
+{
+ u32 reg_val;
+ int timeout;
+
+ /* This magic is from the original code */
+ writel(0, reg_base + AHCI_RWCR);
+ msleep(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+ (0x7 << 24),
+ (0x5 << 24) | BIT(23) | BIT(18));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
+ (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
+ (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
+ sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+ (0x7 << 20), (0x3 << 20));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
+ (0x1f << 5), (0x19 << 5));
+ msleep(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
+
+ timeout = 250; /* Power up takes aprox 50 us */
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
+ if (reg_val == 0x02)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(dev, "PHY power up failed.\n");
+ return -EIO;
+ }
+ udelay(1);
+ } while (1);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
+
+ timeout = 100; /* Calibration takes aprox 10 us */
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
+ if (reg_val == 0x00)
+ break;
+
+ if (--timeout == 0) {
+ dev_err(dev, "PHY calibration failed.\n");
+ return -EIO;
+ }
+ udelay(1);
+ } while (1);
+
+ msleep(15);
+
+ writel(0x7, reg_base + AHCI_RWCR);
+
+ return 0;
+}
+
+static void ahci_sunxi_start_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ /* Setup DMA before DMA start */
+ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400);
+
+ /* Start DMA */
+ sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START);
+}
+
+static const struct ata_port_info ahci_sunxi_port_info = {
+ AHCI_HFLAGS(AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
+ AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
+static int ahci_sunxi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ hpriv->start_engine = ahci_sunxi_start_engine;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info, 0, 0);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ahci_sunxi_resume(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend,
+ ahci_sunxi_resume);
+
+static const struct of_device_id ahci_sunxi_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-ahci", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);
+
+static struct platform_driver ahci_sunxi_driver = {
+ .probe = ahci_sunxi_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = "ahci-sunxi",
+ .owner = THIS_MODULE,
+ .of_match_table = ahci_sunxi_of_match,
+ .pm = &ahci_sunxi_pm_ops,
+ },
+};
+module_platform_driver(ahci_sunxi_driver);
+
+MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver");
+MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
new file mode 100644
index 000000000000..77c89bf171f1
--- /dev/null
+++ b/drivers/ata/ahci_xgene.c
@@ -0,0 +1,486 @@
+/*
+ * AppliedMicro X-Gene SoC SATA Host Controller Driver
+ *
+ * Copyright (c) 2014, Applied Micro Circuits Corporation
+ * Author: Loc Ho <lho@apm.com>
+ * Tuan Phan <tphan@apm.com>
+ * Suman Tripathi <stripathi@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * NOTE: PM support is not currently available.
+ *
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/ahci_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/phy/phy.h>
+#include "ahci.h"
+
+/* Max # of disk per a controller */
+#define MAX_AHCI_CHN_PERCTR 2
+
+/* MUX CSR */
+#define SATA_ENET_CONFIG_REG 0x00000000
+#define CFG_SATA_ENET_SELECT_MASK 0x00000001
+
+/* SATA core host controller CSR */
+#define SLVRDERRATTRIBUTES 0x00000000
+#define SLVWRERRATTRIBUTES 0x00000004
+#define MSTRDERRATTRIBUTES 0x00000008
+#define MSTWRERRATTRIBUTES 0x0000000c
+#define BUSCTLREG 0x00000014
+#define IOFMSTRWAUX 0x00000018
+#define INTSTATUSMASK 0x0000002c
+#define ERRINTSTATUS 0x00000030
+#define ERRINTSTATUSMASK 0x00000034
+
+/* SATA host AHCI CSR */
+#define PORTCFG 0x000000a4
+#define PORTADDR_SET(dst, src) \
+ (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f))
+#define PORTPHY1CFG 0x000000a8
+#define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \
+ (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000))
+#define PORTPHY2CFG 0x000000ac
+#define PORTPHY3CFG 0x000000b0
+#define PORTPHY4CFG 0x000000b4
+#define PORTPHY5CFG 0x000000b8
+#define SCTL0 0x0000012C
+#define PORTPHY5CFG_RTCHG_SET(dst, src) \
+ (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000))
+#define PORTAXICFG_EN_CONTEXT_SET(dst, src) \
+ (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000))
+#define PORTAXICFG 0x000000bc
+#define PORTAXICFG_OUTTRANS_SET(dst, src) \
+ (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000))
+
+/* SATA host controller AXI CSR */
+#define INT_SLV_TMOMASK 0x00000010
+
+/* SATA diagnostic CSR */
+#define CFG_MEM_RAM_SHUTDOWN 0x00000070
+#define BLOCK_MEM_RDY 0x00000074
+
+struct xgene_ahci_context {
+ struct ahci_host_priv *hpriv;
+ struct device *dev;
+ void __iomem *csr_core; /* Core CSR address of IP */
+ void __iomem *csr_diag; /* Diag CSR address of IP */
+ void __iomem *csr_axi; /* AXI CSR address of IP */
+ void __iomem *csr_mux; /* MUX CSR address of IP */
+};
+
+static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx)
+{
+ dev_dbg(ctx->dev, "Release memory from shutdown\n");
+ writel(0x0, ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN);
+ readl(ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */
+ msleep(1); /* reset may take up to 1ms */
+ if (readl(ctx->csr_diag + BLOCK_MEM_RDY) != 0xFFFFFFFF) {
+ dev_err(ctx->dev, "failed to release memory from shutdown\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/**
+ * xgene_ahci_read_id - Read ID data from the specified device
+ * @dev: device
+ * @tf: proposed taskfile
+ * @id: data buffer
+ *
+ * This custom read ID function is required due to the fact that the HW
+ * does not support DEVSLP and the controller state machine may get stuck
+ * after processing the ID query command.
+ */
+static unsigned int xgene_ahci_read_id(struct ata_device *dev,
+ struct ata_taskfile *tf, u16 *id)
+{
+ u32 err_mask;
+ void __iomem *port_mmio = ahci_port_base(dev->link->ap);
+
+ err_mask = ata_do_dev_read_id(dev, tf, id);
+ if (err_mask)
+ return err_mask;
+
+ /*
+ * Mask reserved area. Word78 spec of Link Power Management
+ * bit15-8: reserved
+ * bit7: NCQ autosence
+ * bit6: Software settings preservation supported
+ * bit5: reserved
+ * bit4: In-order sata delivery supported
+ * bit3: DIPM requests supported
+ * bit2: DMA Setup FIS Auto-Activate optimization supported
+ * bit1: DMA Setup FIX non-Zero buffer offsets supported
+ * bit0: Reserved
+ *
+ * Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP
+ */
+ id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8);
+
+ /*
+ * Due to HW errata, restart the port if no other command active.
+ * Otherwise the controller may get stuck.
+ */
+ if (!readl(port_mmio + PORT_CMD_ISSUE)) {
+ writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* Force a barrier */
+ writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* Force a barrier */
+ }
+ return 0;
+}
+
+static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel)
+{
+ void __iomem *mmio = ctx->hpriv->mmio;
+ u32 val;
+
+ dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n",
+ mmio, channel);
+ val = readl(mmio + PORTCFG);
+ val = PORTADDR_SET(val, channel == 0 ? 2 : 3);
+ writel(val, mmio + PORTCFG);
+ readl(mmio + PORTCFG); /* Force a barrier */
+ /* Disable fix rate */
+ writel(0x0001fffe, mmio + PORTPHY1CFG);
+ readl(mmio + PORTPHY1CFG); /* Force a barrier */
+ writel(0x5018461c, mmio + PORTPHY2CFG);
+ readl(mmio + PORTPHY2CFG); /* Force a barrier */
+ writel(0x1c081907, mmio + PORTPHY3CFG);
+ readl(mmio + PORTPHY3CFG); /* Force a barrier */
+ writel(0x1c080815, mmio + PORTPHY4CFG);
+ readl(mmio + PORTPHY4CFG); /* Force a barrier */
+ /* Set window negotiation */
+ val = readl(mmio + PORTPHY5CFG);
+ val = PORTPHY5CFG_RTCHG_SET(val, 0x300);
+ writel(val, mmio + PORTPHY5CFG);
+ readl(mmio + PORTPHY5CFG); /* Force a barrier */
+ val = readl(mmio + PORTAXICFG);
+ val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */
+ val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */
+ writel(val, mmio + PORTAXICFG);
+ readl(mmio + PORTAXICFG); /* Force a barrier */
+}
+
+/**
+ * xgene_ahci_do_hardreset - Issue the actual COMRESET
+ * @link: link to reset
+ * @deadline: deadline jiffies for the operation
+ * @online: Return value to indicate if device online
+ *
+ * Due to the limitation of the hardware PHY, a difference set of setting is
+ * required for each supported disk speed - Gen3 (6.0Gbps), Gen2 (3.0Gbps),
+ * and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will
+ * report disparity error and etc. In addition, during COMRESET, there can
+ * be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and
+ * SERR_10B_8B_ERR, the PHY receiver line must be reseted. The following
+ * algorithm is followed to proper configure the hardware PHY during COMRESET:
+ *
+ * Alg Part 1:
+ * 1. Start the PHY at Gen3 speed (default setting)
+ * 2. Issue the COMRESET
+ * 3. If no link, go to Alg Part 3
+ * 4. If link up, determine if the negotiated speed matches the PHY
+ * configured speed
+ * 5. If they matched, go to Alg Part 2
+ * 6. If they do not matched and first time, configure the PHY for the linked
+ * up disk speed and repeat step 2
+ * 7. Go to Alg Part 2
+ *
+ * Alg Part 2:
+ * 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error
+ * reported in the register PORT_SCR_ERR, then reset the PHY receiver line
+ * 2. Go to Alg Part 3
+ *
+ * Alg Part 3:
+ * 1. Clear any pending from register PORT_SCR_ERR.
+ *
+ * NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition
+ * and until the underlying PHY supports an method to reset the receiver
+ * line, on detection of SERR_DISPARITY or SERR_10B_8B_ERR errors,
+ * an warning message will be printed.
+ */
+static int xgene_ahci_do_hardreset(struct ata_link *link,
+ unsigned long deadline, bool *online)
+{
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct xgene_ahci_context *ctx = hpriv->plat_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_taskfile tf;
+ int rc;
+ u32 val;
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = ATA_BUSY;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+ rc = sata_link_hardreset(link, timing, deadline, online,
+ ahci_check_ready);
+
+ val = readl(port_mmio + PORT_SCR_ERR);
+ if (val & (SERR_DISPARITY | SERR_10B_8B_ERR))
+ dev_warn(ctx->dev, "link has error\n");
+
+ /* clear all errors if any pending */
+ val = readl(port_mmio + PORT_SCR_ERR);
+ writel(val, port_mmio + PORT_SCR_ERR);
+
+ return rc;
+}
+
+static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ bool online;
+ int rc;
+ u32 portcmd_saved;
+ u32 portclb_saved;
+ u32 portclbhi_saved;
+ u32 portrxfis_saved;
+ u32 portrxfishi_saved;
+
+ /* As hardreset resets these CSR, save it to restore later */
+ portcmd_saved = readl(port_mmio + PORT_CMD);
+ portclb_saved = readl(port_mmio + PORT_LST_ADDR);
+ portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI);
+ portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR);
+ portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI);
+
+ ahci_stop_engine(ap);
+
+ rc = xgene_ahci_do_hardreset(link, deadline, &online);
+
+ /* As controller hardreset clears them, restore them */
+ writel(portcmd_saved, port_mmio + PORT_CMD);
+ writel(portclb_saved, port_mmio + PORT_LST_ADDR);
+ writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI);
+ writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR);
+ writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI);
+
+ hpriv->start_engine(ap);
+
+ if (online)
+ *class = ahci_dev_classify(ap);
+
+ return rc;
+}
+
+static void xgene_ahci_host_stop(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+
+ ahci_platform_disable_resources(hpriv);
+}
+
+static struct ata_port_operations xgene_ahci_ops = {
+ .inherits = &ahci_ops,
+ .host_stop = xgene_ahci_host_stop,
+ .hardreset = xgene_ahci_hardreset,
+ .read_id = xgene_ahci_read_id,
+};
+
+static const struct ata_port_info xgene_ahci_port_info = {
+ AHCI_HFLAGS(AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &xgene_ahci_ops,
+};
+
+static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv)
+{
+ struct xgene_ahci_context *ctx = hpriv->plat_data;
+ int i;
+ int rc;
+ u32 val;
+
+ /* Remove IP RAM out of shutdown */
+ rc = xgene_ahci_init_memram(ctx);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++)
+ xgene_ahci_set_phy_cfg(ctx, i);
+
+ /* AXI disable Mask */
+ writel(0xffffffff, hpriv->mmio + HOST_IRQ_STAT);
+ readl(hpriv->mmio + HOST_IRQ_STAT); /* Force a barrier */
+ writel(0, ctx->csr_core + INTSTATUSMASK);
+ val = readl(ctx->csr_core + INTSTATUSMASK); /* Force a barrier */
+ dev_dbg(ctx->dev, "top level interrupt mask 0x%X value 0x%08X\n",
+ INTSTATUSMASK, val);
+
+ writel(0x0, ctx->csr_core + ERRINTSTATUSMASK);
+ readl(ctx->csr_core + ERRINTSTATUSMASK); /* Force a barrier */
+ writel(0x0, ctx->csr_axi + INT_SLV_TMOMASK);
+ readl(ctx->csr_axi + INT_SLV_TMOMASK);
+
+ /* Enable AXI Interrupt */
+ writel(0xffffffff, ctx->csr_core + SLVRDERRATTRIBUTES);
+ writel(0xffffffff, ctx->csr_core + SLVWRERRATTRIBUTES);
+ writel(0xffffffff, ctx->csr_core + MSTRDERRATTRIBUTES);
+ writel(0xffffffff, ctx->csr_core + MSTWRERRATTRIBUTES);
+
+ /* Enable coherency */
+ val = readl(ctx->csr_core + BUSCTLREG);
+ val &= ~0x00000002; /* Enable write coherency */
+ val &= ~0x00000001; /* Enable read coherency */
+ writel(val, ctx->csr_core + BUSCTLREG);
+
+ val = readl(ctx->csr_core + IOFMSTRWAUX);
+ val |= (1 << 3); /* Enable read coherency */
+ val |= (1 << 9); /* Enable write coherency */
+ writel(val, ctx->csr_core + IOFMSTRWAUX);
+ val = readl(ctx->csr_core + IOFMSTRWAUX);
+ dev_dbg(ctx->dev, "coherency 0x%X value 0x%08X\n",
+ IOFMSTRWAUX, val);
+
+ return rc;
+}
+
+static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx)
+{
+ u32 val;
+
+ /* Check for optional MUX resource */
+ if (IS_ERR(ctx->csr_mux))
+ return 0;
+
+ val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG);
+ val &= ~CFG_SATA_ENET_SELECT_MASK;
+ writel(val, ctx->csr_mux + SATA_ENET_CONFIG_REG);
+ val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG);
+ return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0;
+}
+
+static int xgene_ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct xgene_ahci_context *ctx;
+ struct resource *res;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ hpriv->plat_data = ctx;
+ ctx->hpriv = hpriv;
+ ctx->dev = dev;
+
+ /* Retrieve the IP core resource */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ ctx->csr_core = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctx->csr_core))
+ return PTR_ERR(ctx->csr_core);
+
+ /* Retrieve the IP diagnostic resource */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ ctx->csr_diag = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctx->csr_diag))
+ return PTR_ERR(ctx->csr_diag);
+
+ /* Retrieve the IP AXI resource */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+ ctx->csr_axi = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctx->csr_axi))
+ return PTR_ERR(ctx->csr_axi);
+
+ /* Retrieve the optional IP mux resource */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 4);
+ ctx->csr_mux = devm_ioremap_resource(dev, res);
+
+ dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core,
+ hpriv->mmio);
+
+ /* Select ATA */
+ if ((rc = xgene_ahci_mux_select(ctx))) {
+ dev_err(dev, "SATA mux selection failed error %d\n", rc);
+ return -ENODEV;
+ }
+
+ /* Due to errata, HW requires full toggle transition */
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ goto disable_resources;
+ ahci_platform_disable_clks(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ goto disable_resources;
+
+ /* Configure the host controller */
+ xgene_ahci_hw_init(hpriv);
+
+ /*
+ * Setup DMA mask. This is preliminary until the DMA range is sorted
+ * out.
+ */
+ rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ if (rc) {
+ dev_err(dev, "Unable to set dma mask\n");
+ goto disable_resources;
+ }
+
+ rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info, 0, 0);
+ if (rc)
+ goto disable_resources;
+
+ dev_dbg(dev, "X-Gene SATA host controller initialized\n");
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+
+static const struct of_device_id xgene_ahci_of_match[] = {
+ {.compatible = "apm,xgene-ahci"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, xgene_ahci_of_match);
+
+static struct platform_driver xgene_ahci_driver = {
+ .probe = xgene_ahci_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = "xgene-ahci",
+ .owner = THIS_MODULE,
+ .of_match_table = xgene_ahci_of_match,
+ },
+};
+
+module_platform_driver(xgene_ahci_driver);
+
+MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver");
+MODULE_AUTHOR("Loc Ho <lho@apm.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.4");
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 7d196656adb5..9498a7d3846f 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 36605abe5a67..6bd4f660b4e1 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -35,7 +35,6 @@
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
@@ -394,6 +393,9 @@ static ssize_t ahci_show_em_supported(struct device *dev,
*
* If inconsistent, config values are fixed up by this function.
*
+ * If it is not set already this function sets hpriv->start_engine to
+ * ahci_start_engine.
+ *
* LOCKING:
* None.
*/
@@ -500,6 +502,9 @@ void ahci_save_initial_config(struct device *dev,
hpriv->cap = cap;
hpriv->cap2 = cap2;
hpriv->port_map = port_map;
+
+ if (!hpriv->start_engine)
+ hpriv->start_engine = ahci_start_engine;
}
EXPORT_SYMBOL_GPL(ahci_save_initial_config);
@@ -766,7 +771,7 @@ static void ahci_start_port(struct ata_port *ap)
/* enable DMA */
if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE))
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* turn on LEDs */
if (ap->flags & ATA_FLAG_EM) {
@@ -1032,12 +1037,13 @@ static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
size_t size)
{
- int state;
+ unsigned int state;
int pmp;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_em_priv *emp;
- state = simple_strtoul(buf, NULL, 0);
+ if (kstrtouint(buf, 0, &state) < 0)
+ return -EINVAL;
/* get the slot number from the message */
pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap)
/* restart engine */
out_restart:
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_kick_engine);
@@ -1387,8 +1393,8 @@ static int ahci_bad_pmp_check_ready(struct ata_link *link)
return ata_check_ready(status);
}
-int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
void __iomem *port_mmio = ahci_port_base(ap);
@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
rc = sata_link_hardreset(link, timing, deadline, &online,
ahci_check_ready);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
@@ -1629,7 +1636,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
}
if (irq_stat & PORT_IRQ_UNK_FIS) {
- u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
+ u32 *unk = pp->rx_fis + RX_FIS_UNK;
active_ehi->err_mask |= AC_ERR_HSM;
active_ehi->action |= ATA_EH_RESET;
@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *ap)
void ahci_error_handler(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
ahci_stop_engine(ap);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
sata_pmp_error_handler(ap);
@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_device *dev = ap->link.device;
u32 devslp, dm, dito, mdat, deto;
@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
PORT_DEVSLP_ADSE);
writel(devslp, port_mmio + PORT_DEVSLP);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* enable device sleep feature for the drive */
err_mask = ata_dev_set_feature(dev,
@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
static void ahci_enable_fbs(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_port *ap)
} else
dev_err(ap->host->dev, "Failed to enable FBS\n");
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
static void ahci_disable_fbs(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_port *ap)
pp->fbs_enabled = false;
}
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
static void ahci_pmp_attach(struct ata_port *ap)
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
new file mode 100644
index 000000000000..7cb3a85719c0
--- /dev/null
+++ b/drivers/ata/libahci_platform.c
@@ -0,0 +1,541 @@
+/*
+ * AHCI SATA platform library
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ * Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010 MontaVista Software, LLC.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
+#include "ahci.h"
+
+static void ahci_host_stop(struct ata_host *host);
+
+struct ata_port_operations ahci_platform_ops = {
+ .inherits = &ahci_ops,
+ .host_stop = ahci_host_stop,
+};
+EXPORT_SYMBOL_GPL(ahci_platform_ops);
+
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT("ahci_platform"),
+};
+
+/**
+ * ahci_platform_enable_clks - Enable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the clks found in hpriv->clks, starting at
+ * index 0. If any clk fails to enable it disables all the clks already
+ * enabled in reverse order, and then returns an error.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
+{
+ int c, rc;
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
+ rc = clk_prepare_enable(hpriv->clks[c]);
+ if (rc)
+ goto disable_unprepare_clk;
+ }
+ return 0;
+
+disable_unprepare_clk:
+ while (--c >= 0)
+ clk_disable_unprepare(hpriv->clks[c]);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
+
+/**
+ * ahci_platform_disable_clks - Disable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all the clks found in hpriv->clks, in reverse
+ * order of ahci_platform_enable_clks (starting at the end of the array).
+ */
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+{
+ int c;
+
+ for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
+ if (hpriv->clks[c])
+ clk_disable_unprepare(hpriv->clks[c]);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all ahci_platform managed resources in the
+ * following order:
+ * 1) Regulator
+ * 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
+ *
+ * If resource enabling fails at any point the previous enabled resources
+ * are disabled in reverse order.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+{
+ int rc;
+
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ return rc;
+ }
+
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ goto disable_regulator;
+
+ if (hpriv->phy) {
+ rc = phy_init(hpriv->phy);
+ if (rc)
+ goto disable_clks;
+
+ rc = phy_power_on(hpriv->phy);
+ if (rc) {
+ phy_exit(hpriv->phy);
+ goto disable_clks;
+ }
+ }
+
+ return 0;
+
+disable_clks:
+ ahci_platform_disable_clks(hpriv);
+
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+
+/**
+ * ahci_platform_disable_resources - Disable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all ahci_platform managed resources in the
+ * following order:
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
+ */
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+{
+ if (hpriv->phy) {
+ phy_power_off(hpriv->phy);
+ phy_exit(hpriv->phy);
+ }
+
+ ahci_platform_disable_clks(hpriv);
+
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
+
+static void ahci_platform_put_resources(struct device *dev, void *res)
+{
+ struct ahci_host_priv *hpriv = res;
+ int c;
+
+ if (hpriv->got_runtime_pm) {
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+ }
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
+ clk_put(hpriv->clks[c]);
+}
+
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ *
+ * This function allocates an ahci_host_priv struct, and gets the following
+ * resources, storing a reference to them inside the returned struct:
+ *
+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
+ * 2) regulator for controlling the targets power (optional)
+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
+ * or for non devicetree enabled platforms a single clock
+ * 4) phy (optional)
+ *
+ * RETURNS:
+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
+ */
+struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct clk *clk;
+ int i, rc = -ENOMEM;
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return ERR_PTR(-ENOMEM);
+
+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+ GFP_KERNEL);
+ if (!hpriv)
+ goto err_out;
+
+ devres_add(dev, hpriv);
+
+ hpriv->mmio = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
+ if (IS_ERR(hpriv->mmio)) {
+ dev_err(dev, "no mmio space\n");
+ rc = PTR_ERR(hpriv->mmio);
+ goto err_out;
+ }
+
+ hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
+ if (IS_ERR(hpriv->target_pwr)) {
+ rc = PTR_ERR(hpriv->target_pwr);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ hpriv->target_pwr = NULL;
+ }
+
+ for (i = 0; i < AHCI_MAX_CLKS; i++) {
+ /*
+ * For now we must use clk_get(dev, NULL) for the first clock,
+ * because some platforms (da850, spear13xx) are not yet
+ * converted to use devicetree for clocks. For new platforms
+ * this is equivalent to of_clk_get(dev->of_node, 0).
+ */
+ if (i == 0)
+ clk = clk_get(dev, NULL);
+ else
+ clk = of_clk_get(dev->of_node, i);
+
+ if (IS_ERR(clk)) {
+ rc = PTR_ERR(clk);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ break;
+ }
+ hpriv->clks[i] = clk;
+ }
+
+ hpriv->phy = devm_phy_get(dev, "sata-phy");
+ if (IS_ERR(hpriv->phy)) {
+ rc = PTR_ERR(hpriv->phy);
+ switch (rc) {
+ case -ENODEV:
+ case -ENOSYS:
+ /* continue normally */
+ hpriv->phy = NULL;
+ break;
+
+ case -EPROBE_DEFER:
+ goto err_out;
+
+ default:
+ dev_err(dev, "couldn't get sata-phy\n");
+ goto err_out;
+ }
+ }
+
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+ hpriv->got_runtime_pm = true;
+
+ devres_remove_group(dev, NULL);
+ return hpriv;
+
+err_out:
+ devres_release_group(dev, NULL);
+ return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
+
+/**
+ * ahci_platform_init_host - Bring up an ahci-platform host
+ * @pdev: platform device pointer for the host
+ * @hpriv: ahci-host private data for the host
+ * @pi_template: template for the ata_port_info to use
+ * @force_port_map: param passed to ahci_save_initial_config
+ * @mask_port_map: param passed to ahci_save_initial_config
+ *
+ * This function does all the usual steps needed to bring up an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_port_info pi = *pi_template;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ata_host *host;
+ int i, irq, n_ports, rc;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -EINVAL;
+ }
+
+ /* prepare host */
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
+
+ if (hpriv->cap & HOST_CAP_NCQ)
+ pi.flags |= ATA_FLAG_NCQ;
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ ahci_set_em_messages(hpriv, &pi);
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
+
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
+
+ if (pi.flags & ATA_FLAG_EM)
+ ahci_reset_em(host);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ata_port_desc(ap, "mmio %pR",
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
+ ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = hpriv->em_msg_type;
+
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ ahci_print_info(host, "platform");
+
+ return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_platform_sht);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
+
+static void ahci_host_stop(struct ata_host *host)
+{
+ struct device *dev = host->dev;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+
+ if (pdata && pdata->exit)
+ pdata->exit(dev);
+
+ ahci_platform_disable_resources(hpriv);
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * ahci_platform_suspend_host - Suspend an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to suspend an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be disabled after calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend_host(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+
+ if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_err(dev, "firmware update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ /*
+ * AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+
+ return ata_host_suspend(host, PMSG_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
+
+/**
+ * ahci_platform_resume_host - Resume an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to resume an ahci-platform
+ * host, note any necessary resources (ie clks, phy, etc.) must be
+ * initialized / enabled before calling this.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume_host(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ int rc;
+
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
+
+/**
+ * ahci_platform_suspend - Suspend an ahci-platform device
+ * @dev: the platform device to suspend
+ *
+ * This function suspends the host associated with the device, followed by
+ * disabling all the resources of the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_suspend_host(dev);
+ if (rc)
+ return rc;
+
+ if (pdata && pdata->suspend) {
+ rc = pdata->suspend(dev);
+ if (rc)
+ goto resume_host;
+ }
+
+ ahci_platform_disable_resources(hpriv);
+
+ return 0;
+
+resume_host:
+ ahci_platform_resume_host(dev);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
+
+/**
+ * ahci_platform_resume - Resume an ahci-platform device
+ * @dev: the platform device to resume
+ *
+ * This function enables all the resources of the device followed by
+ * resuming the host associated with the device.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ if (pdata && pdata->resume) {
+ rc = pdata->resume(dev);
+ if (rc)
+ goto disable_resources;
+ }
+
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
+
+ /* We resumed so update PM runtime state */
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume);
+#endif
+
+MODULE_DESCRIPTION("AHCI SATA platform library");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 9e69a5308693..b4f7cc2522d9 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -835,6 +835,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
ata_for_each_dev(dev, &ap->link, ALL) {
ata_acpi_clear_gtf(dev);
if (ata_dev_enabled(dev) &&
+ ata_dev_acpi_handle(dev) &&
ata_dev_get_GTF(dev, NULL) >= 0)
dev->flags |= ATA_DFLAG_ACPI_PENDING;
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8cb2522d592a..34406f7fdd7a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5352,22 +5352,17 @@ bool ata_link_offline(struct ata_link *link)
}
#ifdef CONFIG_PM
-static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
- unsigned int action, unsigned int ehi_flags,
- int *async)
+static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
+ unsigned int action, unsigned int ehi_flags,
+ bool async)
{
struct ata_link *link;
unsigned long flags;
- int rc = 0;
/* Previous resume operation might still be in
* progress. Wait for PM_PENDING to clear.
*/
if (ap->pflags & ATA_PFLAG_PM_PENDING) {
- if (async) {
- *async = -EAGAIN;
- return 0;
- }
ata_port_wait_eh(ap);
WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
}
@@ -5376,11 +5371,6 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
spin_lock_irqsave(ap->lock, flags);
ap->pm_mesg = mesg;
- if (async)
- ap->pm_result = async;
- else
- ap->pm_result = &rc;
-
ap->pflags |= ATA_PFLAG_PM_PENDING;
ata_for_each_link(link, ap, HOST_FIRST) {
link->eh_info.action |= action;
@@ -5391,87 +5381,81 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
spin_unlock_irqrestore(ap->lock, flags);
- /* wait and check result */
if (!async) {
ata_port_wait_eh(ap);
WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
}
-
- return rc;
}
-static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int *async)
+/*
+ * On some hardware, device fails to respond after spun down for suspend. As
+ * the device won't be used before being resumed, we don't need to touch the
+ * device. Ask EH to skip the usual stuff and proceed directly to suspend.
+ *
+ * http://thread.gmane.org/gmane.linux.ide/46764
+ */
+static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET
+ | ATA_EHI_NO_AUTOPSY
+ | ATA_EHI_NO_RECOVERY;
+
+static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg)
{
- /*
- * On some hardware, device fails to respond after spun down
- * for suspend. As the device won't be used before being
- * resumed, we don't need to touch the device. Ask EH to skip
- * the usual stuff and proceed directly to suspend.
- *
- * http://thread.gmane.org/gmane.linux.ide/46764
- */
- unsigned int ehi_flags = ATA_EHI_QUIET | ATA_EHI_NO_AUTOPSY |
- ATA_EHI_NO_RECOVERY;
- return ata_port_request_pm(ap, mesg, 0, ehi_flags, async);
+ ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false);
}
-static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
+static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg)
{
- struct ata_port *ap = to_ata_port(dev);
-
- return __ata_port_suspend_common(ap, mesg, NULL);
+ ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true);
}
-static int ata_port_suspend(struct device *dev)
+static int ata_port_pm_suspend(struct device *dev)
{
+ struct ata_port *ap = to_ata_port(dev);
+
if (pm_runtime_suspended(dev))
return 0;
- return ata_port_suspend_common(dev, PMSG_SUSPEND);
+ ata_port_suspend(ap, PMSG_SUSPEND);
+ return 0;
}
-static int ata_port_do_freeze(struct device *dev)
+static int ata_port_pm_freeze(struct device *dev)
{
+ struct ata_port *ap = to_ata_port(dev);
+
if (pm_runtime_suspended(dev))
return 0;
- return ata_port_suspend_common(dev, PMSG_FREEZE);
+ ata_port_suspend(ap, PMSG_FREEZE);
+ return 0;
}
-static int ata_port_poweroff(struct device *dev)
+static int ata_port_pm_poweroff(struct device *dev)
{
- return ata_port_suspend_common(dev, PMSG_HIBERNATE);
+ ata_port_suspend(to_ata_port(dev), PMSG_HIBERNATE);
+ return 0;
}
-static int __ata_port_resume_common(struct ata_port *ap, pm_message_t mesg,
- int *async)
-{
- int rc;
+static const unsigned int ata_port_resume_ehi = ATA_EHI_NO_AUTOPSY
+ | ATA_EHI_QUIET;
- rc = ata_port_request_pm(ap, mesg, ATA_EH_RESET,
- ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, async);
- return rc;
+static void ata_port_resume(struct ata_port *ap, pm_message_t mesg)
+{
+ ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, false);
}
-static int ata_port_resume_common(struct device *dev, pm_message_t mesg)
+static void ata_port_resume_async(struct ata_port *ap, pm_message_t mesg)
{
- struct ata_port *ap = to_ata_port(dev);
-
- return __ata_port_resume_common(ap, mesg, NULL);
+ ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, true);
}
-static int ata_port_resume(struct device *dev)
+static int ata_port_pm_resume(struct device *dev)
{
- int rc;
-
- rc = ata_port_resume_common(dev, PMSG_RESUME);
- if (!rc) {
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- }
-
- return rc;
+ ata_port_resume_async(to_ata_port(dev), PMSG_RESUME);
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ return 0;
}
/*
@@ -5500,21 +5484,23 @@ static int ata_port_runtime_idle(struct device *dev)
static int ata_port_runtime_suspend(struct device *dev)
{
- return ata_port_suspend_common(dev, PMSG_AUTO_SUSPEND);
+ ata_port_suspend(to_ata_port(dev), PMSG_AUTO_SUSPEND);
+ return 0;
}
static int ata_port_runtime_resume(struct device *dev)
{
- return ata_port_resume_common(dev, PMSG_AUTO_RESUME);
+ ata_port_resume(to_ata_port(dev), PMSG_AUTO_RESUME);
+ return 0;
}
static const struct dev_pm_ops ata_port_pm_ops = {
- .suspend = ata_port_suspend,
- .resume = ata_port_resume,
- .freeze = ata_port_do_freeze,
- .thaw = ata_port_resume,
- .poweroff = ata_port_poweroff,
- .restore = ata_port_resume,
+ .suspend = ata_port_pm_suspend,
+ .resume = ata_port_pm_resume,
+ .freeze = ata_port_pm_freeze,
+ .thaw = ata_port_pm_resume,
+ .poweroff = ata_port_pm_poweroff,
+ .restore = ata_port_pm_resume,
.runtime_suspend = ata_port_runtime_suspend,
.runtime_resume = ata_port_runtime_resume,
@@ -5526,18 +5512,17 @@ static const struct dev_pm_ops ata_port_pm_ops = {
* level. sas suspend/resume is async to allow parallel port recovery
* since sas has multiple ata_port instances per Scsi_Host.
*/
-int ata_sas_port_async_suspend(struct ata_port *ap, int *async)
+void ata_sas_port_suspend(struct ata_port *ap)
{
- return __ata_port_suspend_common(ap, PMSG_SUSPEND, async);
+ ata_port_suspend_async(ap, PMSG_SUSPEND);
}
-EXPORT_SYMBOL_GPL(ata_sas_port_async_suspend);
+EXPORT_SYMBOL_GPL(ata_sas_port_suspend);
-int ata_sas_port_async_resume(struct ata_port *ap, int *async)
+void ata_sas_port_resume(struct ata_port *ap)
{
- return __ata_port_resume_common(ap, PMSG_RESUME, async);
+ ata_port_resume_async(ap, PMSG_RESUME);
}
-EXPORT_SYMBOL_GPL(ata_sas_port_async_resume);
-
+EXPORT_SYMBOL_GPL(ata_sas_port_resume);
/**
* ata_host_suspend - suspend host
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 6d8757008318..6760fc4e85b8 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -95,12 +95,13 @@ enum {
* represents timeout for that try. The first try can be soft or
* hardreset. All others are hardreset if available. In most cases
* the first reset w/ 10sec timeout should succeed. Following entries
- * are mostly for error handling, hotplug and retarded devices.
+ * are mostly for error handling, hotplug and those outlier devices that
+ * take an exceptionally long time to recover from reset.
*/
static const unsigned long ata_eh_reset_timeouts[] = {
10000, /* most drives spin up by 10sec */
10000, /* > 99% working drives spin up before 20sec */
- 35000, /* give > 30 secs of idleness for retarded devices */
+ 35000, /* give > 30 secs of idleness for outlier devices */
5000, /* and sweet one last chance */
ULONG_MAX, /* > 1 min has elapsed, give up */
};
@@ -4069,7 +4070,7 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
ata_acpi_set_state(ap, ap->pm_mesg);
out:
- /* report result */
+ /* update the flags */
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~ATA_PFLAG_PM_PENDING;
@@ -4078,11 +4079,6 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
else if (ap->pflags & ATA_PFLAG_FROZEN)
ata_port_schedule_eh(ap);
- if (ap->pm_result) {
- *ap->pm_result = rc;
- ap->pm_result = NULL;
- }
-
spin_unlock_irqrestore(ap->lock, flags);
return;
@@ -4134,13 +4130,9 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
/* tell ACPI that we're resuming */
ata_acpi_on_resume(ap);
- /* report result */
+ /* update the flags */
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
- if (ap->pm_result) {
- *ap->pm_result = rc;
- ap->pm_result = NULL;
- }
spin_unlock_irqrestore(ap->lock, flags);
}
#endif /* CONFIG_PM */
diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index 88949c6d55dd..f3a65a3140d3 100644
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -85,21 +85,6 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
return ODD_MECH_TYPE_UNSUPPORTED;
}
-static bool odd_can_poweroff(struct ata_device *ata_dev)
-{
- acpi_handle handle;
- struct acpi_device *acpi_dev;
-
- handle = ata_dev_acpi_handle(ata_dev);
- if (!handle)
- return false;
-
- if (acpi_bus_get_device(handle, &acpi_dev))
- return false;
-
- return acpi_device_can_poweroff(acpi_dev);
-}
-
/* Test if ODD is zero power ready by sense code */
static bool zpready(struct ata_device *dev)
{
@@ -267,13 +252,11 @@ static void ata_acpi_remove_pm_notifier(struct ata_device *dev)
void zpodd_init(struct ata_device *dev)
{
+ struct acpi_device *adev = ACPI_COMPANION(&dev->tdev);
enum odd_mech_type mech_type;
struct zpodd *zpodd;
- if (dev->zpodd)
- return;
-
- if (!odd_can_poweroff(dev))
+ if (dev->zpodd || !adev || !acpi_device_can_poweroff(adev))
return;
mech_type = zpodd_get_mech_type(dev);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 62c9ac80c6e9..5108b8744dce 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -7,7 +7,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index d23e2b3ca0b6..1206fa6b62ca 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 73492dd4a4bc..6fac524c2f50 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -356,7 +356,7 @@ static void cf_exit(struct arasan_cf_dev *acdev)
static void dma_callback(void *dev)
{
- struct arasan_cf_dev *acdev = (struct arasan_cf_dev *) dev;
+ struct arasan_cf_dev *acdev = dev;
complete(&acdev->dma_completion);
}
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 1581dee2967a..3aa4e655e3c6 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index d63ee8f41a4f..e9c87274a781 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -18,7 +18,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/gfp.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 24e51056ac26..30fa4ca4cef6 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index 2ca5026f2c15..7e73a0f1e323 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -29,7 +29,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 8fb69e5ca1b7..57f1be64dbf2 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/gfp.h>
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 1275a8d4dedc..6bca3505b9e9 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -26,7 +26,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index f10baabbf5db..bcde4b786807 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -34,7 +34,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index f07f2296acdc..8afe854a5a50 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -26,7 +26,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 997e16a3a63f..2c0986fa4bb2 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -31,7 +31,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 0448860a2077..32ddcae5a360 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -33,7 +33,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/libata.h>
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 810bc9964dde..3435bd6a5cc9 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 3c12fd7acd41..f440892225f4 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index 980b88e109fc..cad9d45749c4 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -34,7 +34,6 @@
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 35b521348d31..8e76f79689d3 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index a9d74eff5fc4..3ba843f5cdc0 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 4be0398c153d..b93c0f0729e7 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 85cf2861e0b7..255c5aaff3a8 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c
index b0b18ec5465f..e0872db913d6 100644
--- a/drivers/ata/pata_imx.c
+++ b/drivers/ata/pata_imx.c
@@ -15,7 +15,6 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
@@ -100,13 +99,9 @@ static int pata_imx_probe(struct platform_device *pdev)
struct resource *io_res;
int ret;
- io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (io_res == NULL)
- return -EINVAL;
-
irq = platform_get_irq(pdev, 0);
- if (irq <= 0)
- return -EINVAL;
+ if (irq < 0)
+ return irq;
priv = devm_kzalloc(&pdev->dev,
sizeof(struct pata_imx_priv), GFP_KERNEL);
@@ -136,11 +131,10 @@ static int pata_imx_probe(struct platform_device *pdev)
ap->pio_mask = ATA_PIO0;
ap->flags |= ATA_FLAG_SLAVE_POSS;
- priv->host_regs = devm_ioremap(&pdev->dev, io_res->start,
- resource_size(io_res));
- if (!priv->host_regs) {
- dev_err(&pdev->dev, "failed to map IO/CTL base\n");
- ret = -EBUSY;
+ io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->host_regs = devm_ioremap_resource(&pdev->dev, io_res);
+ if (IS_ERR(priv->host_regs)) {
+ ret = PTR_ERR(priv->host_regs);
goto err;
}
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 2a8dd9527ecc..81369d187a5c 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 581e04d80367..dc3d7877f29d 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -72,7 +72,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/slab.h>
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 76e739b031b6..b1cfa0258fd3 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index be816428b430..bce2a8ca4678 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -916,7 +916,6 @@ static __init int probe_chip_type(struct legacy_probe *probe)
local_irq_restore(flags);
return BIOS;
}
- local_irq_restore(flags);
}
if (ht6560a & mask)
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index a4f5e781c8c2..6bad3df3a13c 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 1f5f28bb0bb8..f39a5379e816 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -28,7 +28,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index ad1a0febd620..e3b97093ef9a 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -7,7 +7,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 9513e071040d..56201a69af12 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -37,7 +37,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 0c424dae56e7..6154c3ee11a5 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 16dc3a63a23d..d44df7ccfe43 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index d77b2e1054ef..319b64491b7b 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -16,7 +16,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 4ea70cd22aee..fb042e0519d0 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -26,7 +26,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 78ede3fd1875..bb71ea214b99 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 40254f4df584..bcc4b968c049 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -26,7 +26,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/slab.h>
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 9d874c85d64d..1151f23177bb 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index c34fc50070a6..defa050e1784 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
index 2beb6b5045f8..0b46be117051 100644
--- a/drivers/ata/pata_piccolo.c
+++ b/drivers/ata/pata_piccolo.c
@@ -18,7 +18,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 02794885de10..a5579b55e332 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -13,7 +13,6 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
index a6f05acad61e..73259bfda1e3 100644
--- a/drivers/ata/pata_pxa.c
+++ b/drivers/ata/pata_pxa.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/ata.h>
#include <linux/libata.h>
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index f582ba180a7d..be3f10240dca 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index 79a970f05a2e..521b2137ea3e 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -24,7 +24,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 040b093617a4..caedc90855b2 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index ce2f828c17b3..96a232fffae6 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -32,7 +32,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index f35f15f4d83e..f1f5b5ae3382 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -35,7 +35,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index d3830c45a369..5a1cde0ea360 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -27,7 +27,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 96c6a79ef606..e27f31fe1b67 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -34,7 +34,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index c4b0b073ba8e..73fe362d9716 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 1e8363640bf5..78d913aa93c8 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -26,7 +26,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 6816911ac422..900f0e4a1faf 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 94473da68c02..7bc78e264f9e 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -36,7 +36,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index c3ab9a6c3965..f6c9632bdff6 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -55,7 +55,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/gfp.h>
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 8ea6e6afd041..f10631beffa8 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -36,7 +36,6 @@
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 523524b68022..0bb2cabd2197 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -29,7 +29,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/device.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -462,8 +461,7 @@ static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
int chan;
u32 tfr_reg, err_reg;
unsigned long flags;
- struct sata_dwc_device *hsdev =
- (struct sata_dwc_device *)hsdev_instance;
+ struct sata_dwc_device *hsdev = hsdev_instance;
struct ata_host *host = (struct ata_host *)hsdev->host;
struct ata_port *ap;
struct sata_dwc_device_port *hsdevp;
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 870b11eadc6d..65965cf5af06 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/types.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -142,7 +141,7 @@ static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state,
ssize_t size)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
- struct ecx_plat_data *pdata = (struct ecx_plat_data *) hpriv->plat_data;
+ struct ecx_plat_data *pdata = hpriv->plat_data;
struct ahci_port_priv *pp = ap->private_data;
unsigned long flags;
int pmp, i;
@@ -403,6 +402,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
static const unsigned long timing[] = { 5, 100, 500};
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -431,7 +431,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
break;
} while (!online && retry--);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index d74def823d3e..ba5f27120332 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -40,7 +40,6 @@
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 97f4acb54ad6..3638887476f6 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -35,7 +35,6 @@
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 3b0dd57984e1..9a6bd4cd29a0 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -31,7 +31,6 @@
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index b7695e804635..3062f8605b29 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -37,7 +37,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 1ad2f62d34b9..b513428171b3 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -33,7 +33,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index dc4f70179e7d..c630fa812624 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -39,7 +39,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 9947010afc0f..39b5de60a1f9 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -82,7 +82,6 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
@@ -1021,8 +1020,7 @@ static void pdc20621_get_from_dimm(struct ata_host *host, void *psource,
idx++;
dist = ((long) (window_size - (offset + size))) >= 0 ? size :
(long) (window_size - offset);
- memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4),
- dist);
+ memcpy_fromio(psource, dimm_mmio + offset / 4, dist);
psource += dist;
size -= dist;
@@ -1031,8 +1029,7 @@ static void pdc20621_get_from_dimm(struct ata_host *host, void *psource,
readl(mmio + PDC_GENERAL_CTLR);
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- memcpy_fromio((char *) psource, (char *) (dimm_mmio),
- window_size / 4);
+ memcpy_fromio(psource, dimm_mmio, window_size / 4);
psource += window_size;
size -= window_size;
idx++;
@@ -1043,8 +1040,7 @@ static void pdc20621_get_from_dimm(struct ata_host *host, void *psource,
readl(mmio + PDC_GENERAL_CTLR);
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- memcpy_fromio((char *) psource, (char *) (dimm_mmio),
- size / 4);
+ memcpy_fromio(psource, dimm_mmio, size / 4);
}
}
#endif
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 6d6489118873..08f98c3ed5c8 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -28,7 +28,6 @@
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 87f056e54a9d..f72e84228c5c 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -36,7 +36,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 44f304b3de63..29e847aac34b 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -37,7 +37,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index d2895836f9fa..766098af4eb7 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -700,46 +700,26 @@ void sas_probe_sata(struct asd_sas_port *port)
}
-static bool sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func)
+static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func)
{
struct domain_device *dev, *n;
- bool retry = false;
list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) {
- int rc;
-
if (!dev_is_sata(dev))
continue;
sas_ata_wait_eh(dev);
- rc = dev->sata_dev.pm_result;
- if (rc == -EAGAIN)
- retry = true;
- else if (rc) {
- /* since we don't have a
- * ->port_{suspend|resume} routine in our
- * ata_port ops, and no entanglements with
- * acpi, suspend should just be mechanical trip
- * through eh, catch cases where these
- * assumptions are invalidated
- */
- WARN_ONCE(1, "failed %s %s error: %d\n", func,
- dev_name(&dev->rphy->dev), rc);
- }
/* if libata failed to power manage the device, tear it down */
if (ata_dev_disabled(sas_to_ata_dev(dev)))
sas_fail_probe(dev, func, -ENODEV);
}
-
- return retry;
}
void sas_suspend_sata(struct asd_sas_port *port)
{
struct domain_device *dev;
- retry:
mutex_lock(&port->ha->disco_mutex);
list_for_each_entry(dev, &port->dev_list, dev_list_node) {
struct sata_device *sata;
@@ -751,20 +731,17 @@ void sas_suspend_sata(struct asd_sas_port *port)
if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND)
continue;
- sata->pm_result = -EIO;
- ata_sas_port_async_suspend(sata->ap, &sata->pm_result);
+ ata_sas_port_suspend(sata->ap);
}
mutex_unlock(&port->ha->disco_mutex);
- if (sas_ata_flush_pm_eh(port, __func__))
- goto retry;
+ sas_ata_flush_pm_eh(port, __func__);
}
void sas_resume_sata(struct asd_sas_port *port)
{
struct domain_device *dev;
- retry:
mutex_lock(&port->ha->disco_mutex);
list_for_each_entry(dev, &port->dev_list, dev_list_node) {
struct sata_device *sata;
@@ -776,13 +753,11 @@ void sas_resume_sata(struct asd_sas_port *port)
if (sata->ap->pm_mesg.event == PM_EVENT_ON)
continue;
- sata->pm_result = -EIO;
- ata_sas_port_async_resume(sata->ap, &sata->pm_result);
+ ata_sas_port_resume(sata->ap);
}
mutex_unlock(&port->ha->disco_mutex);
- if (sas_ata_flush_pm_eh(port, __func__))
- goto retry;
+ sas_ata_flush_pm_eh(port, __func__);
}
/**
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index 73a25005d88a..1f16d502600c 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -19,15 +19,37 @@
struct device;
struct ata_port_info;
+struct ahci_host_priv;
+struct platform_device;
+/*
+ * Note ahci_platform_data is deprecated, it is only kept around for use
+ * by the old da850 and spear13xx ahci code.
+ * New drivers should instead declare their own platform_driver struct, and
+ * use ahci_platform* functions in their own probe, suspend and resume methods.
+ */
struct ahci_platform_data {
int (*init)(struct device *dev, void __iomem *addr);
void (*exit)(struct device *dev);
int (*suspend)(struct device *dev);
int (*resume)(struct device *dev);
- const struct ata_port_info *ata_port_info;
- unsigned int force_port_map;
- unsigned int mask_port_map;
};
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev);
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map);
+
+int ahci_platform_suspend_host(struct device *dev);
+int ahci_platform_resume_host(struct device *dev);
+int ahci_platform_suspend(struct device *dev);
+int ahci_platform_resume(struct device *dev);
+
#endif /* _AHCI_PLATFORM_H */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bec6dbe939a0..1de36be64df4 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -848,7 +848,6 @@ struct ata_port {
struct completion park_req_pending;
pm_message_t pm_mesg;
- int *pm_result;
enum ata_lpm_policy target_lpm_policy;
struct timer_list fastdrain_timer;
@@ -1140,16 +1139,14 @@ extern bool ata_link_offline(struct ata_link *link);
#ifdef CONFIG_PM
extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
extern void ata_host_resume(struct ata_host *host);
-extern int ata_sas_port_async_suspend(struct ata_port *ap, int *async);
-extern int ata_sas_port_async_resume(struct ata_port *ap, int *async);
+extern void ata_sas_port_suspend(struct ata_port *ap);
+extern void ata_sas_port_resume(struct ata_port *ap);
#else
-static inline int ata_sas_port_async_suspend(struct ata_port *ap, int *async)
+static inline void ata_sas_port_suspend(struct ata_port *ap)
{
- return 0;
}
-static inline int ata_sas_port_async_resume(struct ata_port *ap, int *async)
+static inline void ata_sas_port_resume(struct ata_port *ap)
{
- return 0;
}
#endif
extern int ata_ratelimit(void);
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index f843dd8722a9..ef7872c20da9 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -172,7 +172,6 @@ struct sata_device {
enum ata_command_set command_set;
struct smp_resp rps_resp; /* report_phy_sata_resp */
u8 port_no; /* port number, if this is a PM (Port) */
- int pm_result;
struct ata_port *ap;
struct ata_host ata_host;