summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/mips/Kconfig32
-rw-r--r--arch/mips/alchemy/Kconfig2
-rw-r--r--arch/mips/pic32/Kconfig2
3 files changed, 17 insertions, 19 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2018c2b0e078..512b5def854d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -79,7 +79,7 @@ config MIPS_ALCHEMY
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select SYS_SUPPORTS_ZBOOT
select COMMON_CLK
@@ -98,7 +98,7 @@ config AR7
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT_UART16550
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select VLYNQ
select HAVE_CLK
help
@@ -122,11 +122,11 @@ config ATH25
config ATH79
bool "Atheros AR71XX/AR724X/AR913X based boards"
select ARCH_HAS_RESET_CONTROLLER
- select ARCH_REQUIRE_GPIOLIB
select BOOT_RAW
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
+ select GPIOLIB
select HAVE_CLK
select COMMON_CLK
select CLKDEV_LOOKUP
@@ -170,7 +170,6 @@ config BMIPS_GENERIC
select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
- select ARCH_WANT_OPTIONAL_GPIOLIB
help
Build a generic DT-based kernel image that boots on select
BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
@@ -179,7 +178,6 @@ config BMIPS_GENERIC
config BCM47XX
bool "Broadcom BCM47XX based boards"
- select ARCH_WANT_OPTIONAL_GPIOLIB
select BOOT_RAW
select CEVT_R4K
select CSRC_R4K
@@ -211,7 +209,7 @@ config BCM63XX
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
select SWAP_IO_SPACE
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select HAVE_CLK
select MIPS_L1_CACHE_SHIFT_4
help
@@ -305,7 +303,7 @@ config MACH_INGENIC
select SYS_SUPPORTS_ZBOOT_UART16550
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select COMMON_CLK
select GENERIC_IRQ_CHIP
select BUILTIN_DTB
@@ -325,7 +323,7 @@ config LANTIQ
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_MULTITHREADING
select SYS_HAS_EARLY_PRINTK
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select SWAP_IO_SPACE
select BOOT_RAW
select CLKDEV_LOOKUP
@@ -377,7 +375,6 @@ config MACH_LOONGSON64
config MACH_PISTACHIO
bool "IMG Pistachio SoC based boards"
- select ARCH_REQUIRE_GPIOLIB
select BOOT_ELF32
select BOOT_RAW
select CEVT_R4K
@@ -385,6 +382,7 @@ config MACH_PISTACHIO
select COMMON_CLK
select CSRC_R4K
select DMA_MAYBE_COHERENT
+ select GPIOLIB
select IRQ_MIPS_CPU
select LIBFDT
select MFD_SYSCON
@@ -406,13 +404,13 @@ config MACH_PISTACHIO
config MACH_XILFPGA
bool "MIPSfpga Xilinx based boards"
- select ARCH_REQUIRE_GPIOLIB
select BOOT_ELF32
select BOOT_RAW
select BUILTIN_DTB
select CEVT_R4K
select COMMON_CLK
select CSRC_R4K
+ select GPIOLIB
select IRQ_MIPS_CPU
select LIBFDT
select MIPS_CPU_SCACHE
@@ -536,7 +534,7 @@ config MACH_VR41XX
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
select SYS_SUPPORTS_MIPS16
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
config NXP_STB220
bool "NXP STB220 board"
@@ -856,7 +854,7 @@ config MIKROTIK_RB532
select SYS_SUPPORTS_LITTLE_ENDIAN
select SWAP_IO_SPACE
select BOOT_RAW
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select MIPS_L1_CACHE_SHIFT_4
help
Support the Mikrotik(tm) RouterBoard 532 series,
@@ -879,7 +877,7 @@ config CAVIUM_OCTEON_SOC
select HW_HAS_PCI
select ZONE_DMA32
select HOLES_IN_ZONE
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select LIBFDT
select USE_OF
select ARCH_SPARSEMEM_ENABLE
@@ -937,7 +935,7 @@ config NLM_XLP_BOARD
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select ARCH_PHYS_ADDR_T_64BIT
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_HIGHMEM
@@ -1077,7 +1075,7 @@ config MIPS_CLOCK_VSYSCALL
def_bool CSRC_R4K || CLKSRC_MIPS_GIC
config GPIO_TXX9
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
bool
config FW_CFE
@@ -1342,7 +1340,7 @@ config CPU_LOONGSON3
select CPU_SUPPORTS_HUGEPAGES
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
help
The Loongson 3 processor implements the MIPS64R2 instruction
set with many extensions.
@@ -1362,7 +1360,7 @@ config CPU_LOONGSON2F
bool "Loongson 2F"
depends on SYS_HAS_CPU_LOONGSON2F
select CPU_LOONGSON2
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
help
The Loongson 2F processor implements the MIPS III instruction set
with many extensions.
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 7fa24881b708..88b4d6a792c1 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -20,7 +20,7 @@ config MIPS_MTX1
config MIPS_DB1XXX
bool "Alchemy DB1XXX / PB1XXX boards"
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select HW_HAS_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig
index 1985971b9890..527d37da05ac 100644
--- a/arch/mips/pic32/Kconfig
+++ b/arch/mips/pic32/Kconfig
@@ -14,7 +14,7 @@ config PIC32MZDA
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
select COMMON_CLK
select CLKDEV_LOOKUP
select LIBFDT