summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS4
-rw-r--r--arch/arm/Kconfig14
-rw-r--r--arch/arm/Kconfig.debug7
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/configs/netx_defconfig80
-rw-r--r--arch/arm/include/debug/netx.S32
-rw-r--r--arch/arm/lib/Makefile1
-rw-r--r--arch/arm/mach-at91/pm.c1
-rw-r--r--arch/arm/mach-bcm/Kconfig2
-rw-r--r--arch/arm/mach-bcm/Makefile3
-rw-r--r--arch/arm/mach-bcm/bcm63xx_smp.c1
-rw-r--r--arch/arm/mach-bcm/bcm_kona_smc.c2
-rw-r--r--arch/arm/mach-bcm/board_bcm281xx.c1
-rw-r--r--arch/arm/mach-bcm/platsmp-brcmstb.c7
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c43
-rw-r--r--arch/arm/mach-exynos/Kconfig7
-rw-r--r--arch/arm/mach-exynos/Makefile6
-rw-r--r--arch/arm/mach-exynos/exynos-smc.S3
-rw-r--r--arch/arm/mach-exynos/sleep.S3
-rw-r--r--arch/arm/mach-exynos/suspend.c8
-rw-r--r--arch/arm/mach-highbank/Makefile3
-rw-r--r--arch/arm/mach-highbank/smc.S3
-rw-r--r--arch/arm/mach-imx/cpuidle-imx6q.c10
-rw-r--r--arch/arm/mach-imx/mach-imx7d.c7
-rw-r--r--arch/arm/mach-keystone/Makefile3
-rw-r--r--arch/arm/mach-keystone/smc.S1
-rw-r--r--arch/arm/mach-omap2/Makefile13
-rw-r--r--arch/arm/mach-omap2/omap-headsmp.S2
-rw-r--r--arch/arm/mach-omap2/omap-smc.S3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c8
-rw-r--r--arch/arm/mach-omap2/sleep33xx.S1
-rw-r--r--arch/arm/mach-omap2/sleep34xx.S2
-rw-r--r--arch/arm/mach-omap2/sleep43xx.S2
-rw-r--r--arch/arm/mach-omap2/sleep44xx.S3
-rw-r--r--arch/arm/mach-pxa/include/mach/lubbock.h4
-rw-r--r--arch/arm/mach-pxa/lubbock.c3
-rw-r--r--arch/arm/mach-rockchip/platsmp.c12
-rw-r--r--arch/arm/mach-rockchip/pm.c2
-rw-r--r--arch/arm/mach-rpc/Makefile3
-rw-r--r--arch/arm/mach-rpc/dma.c97
-rw-r--r--arch/arm/mach-rpc/ecard-loader.S (renamed from arch/arm/lib/ecard.S)0
-rw-r--r--arch/arm/mach-rpc/ecard.c32
-rw-r--r--arch/arm/mach-rpc/floppydma.S (renamed from arch/arm/lib/floppydma.S)0
-rw-r--r--arch/arm/mach-rpc/include/mach/uncompress.h23
-rw-r--r--arch/arm/mach-rpc/io-acorn.S (renamed from arch/arm/lib/io-acorn.S)0
-rw-r--r--arch/arm/mach-rpc/irq.c136
-rw-r--r--arch/arm/mach-rpc/time.c38
-rw-r--r--arch/arm/mach-sa1100/assabet.c91
-rw-r--r--arch/arm/mach-sa1100/badge4.c2
-rw-r--r--arch/arm/mach-sa1100/clock.c220
-rw-r--r--arch/arm/mach-sa1100/h3xxx.c64
-rw-r--r--arch/arm/mach-sa1100/hackkit.c48
-rw-r--r--arch/arm/mach-sa1100/neponset.c109
-rw-r--r--arch/arm/mach-shmobile/setup-rcar-gen2.c17
-rw-r--r--arch/arm/mach-stm32/Kconfig3
-rw-r--r--arch/arm/mach-tango/Makefile3
-rw-r--r--arch/arm/mach-tango/smc.S2
-rw-r--r--arch/arm/mach-versatile/versatile_dt.c164
-rw-r--r--arch/arm64/Kconfig.platforms3
-rw-r--r--drivers/soc/renesas/Kconfig4
-rw-r--r--drivers/soc/ti/pm33xx.c1
-rw-r--r--drivers/tty/serial/Kconfig1
-rw-r--r--drivers/tty/serial/sa1100.c46
-rw-r--r--include/linux/platform_data/video-clcd-versatile.h28
64 files changed, 492 insertions, 951 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index a63d465d3e2d..9bd4c3b154e8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1264,7 +1264,7 @@ F: include/uapi/drm/panfrost_drm.h
ARM MFM AND FLOPPY DRIVERS
M: Ian Molton <spyro@f2s.com>
S: Maintained
-F: arch/arm/lib/floppydma.S
+F: arch/arm/mach-rpc/floppydma.S
F: arch/arm/include/asm/floppy.h
ARM PMU PROFILING AND DEBUGGING
@@ -1863,6 +1863,7 @@ F: arch/arm/mach-orion5x/
F: arch/arm/plat-orion/
F: arch/arm/boot/dts/dove*
F: arch/arm/boot/dts/orion5x*
+T: git git://git.infradead.org/linux-mvebu.git
ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support
M: Jason Cooper <jason@lakedaemon.net>
@@ -1883,6 +1884,7 @@ F: drivers/irqchip/irq-armada-370-xp.c
F: drivers/irqchip/irq-mvebu-*
F: drivers/pinctrl/mvebu/
F: drivers/rtc/rtc-armada38x.c
+T: git git://git.infradead.org/linux-mvebu.git
ARM/Mediatek RTC DRIVER
M: Eddie Huang <eddie.huang@mediatek.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 600c5ba1af41..33b00579beff 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -377,15 +377,6 @@ config ARCH_FOOTBRIDGE
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-config ARCH_NETX
- bool "Hilscher NetX based"
- select ARM_VIC
- select CLKSRC_MMIO
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- help
- This enables support for systems based on the Hilscher NetX Soc
-
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
@@ -531,7 +522,7 @@ config ARCH_RPC
select ARCH_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ARCH_SPARSEMEM_ENABLE
- select ARCH_USES_GETTIMEOFFSET
+ select ARM_HAS_SG_CHAIN
select CPU_SA110
select FIQ
select HAVE_IDE
@@ -552,6 +543,7 @@ config ARCH_SA1100
select CLKSRC_MMIO
select CLKSRC_PXA
select TIMER_OF if OF
+ select COMMON_CLK
select CPU_FREQ
select CPU_SA1100
select GENERIC_CLOCKEVENTS
@@ -770,8 +762,6 @@ source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/mach-mxs/Kconfig"
-source "arch/arm/mach-netx/Kconfig"
-
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/mach-npcm/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9a8862fee738..c929bea9a9ff 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -638,13 +638,6 @@ choice
Say Y here if you want kernel low-level debugging support
for Mediatek mt8135 based platforms on UART3.
- config DEBUG_NETX_UART
- bool "Kernel low-level debugging messages via NetX UART"
- depends on ARCH_NETX
- help
- Say Y here if you want kernel low-level debugging support
- on Hilscher NetX based platforms.
-
config DEBUG_NOMADIK_UART
bool "Kernel low-level debugging messages via NOMADIK UART"
depends on ARCH_NOMADIK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f863c6935d0e..c3624ca6c0bc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -191,7 +191,6 @@ machine-$(CONFIG_ARCH_MXC) += imx
machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MILBEAUT) += milbeaut
machine-$(CONFIG_ARCH_MXS) += mxs
-machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
machine-$(CONFIG_ARCH_NPCM) += npcm
machine-$(CONFIG_ARCH_NSPIRE) += nspire
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
deleted file mode 100644
index cc5c5f9ef720..000000000000
--- a/arch/arm/configs/netx_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_NETX=y
-CONFIG_MACH_NXDKN=y
-CONFIG_MACH_NXDB500=y
-CONFIG_MACH_NXEB500HMI=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,115200"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_NETFILTER=y
-CONFIG_NET_PKTGEN=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_NETX=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_NETX=y
-CONFIG_SERIAL_NETX_CONSOLE=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_RTC_CLASS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC_CCITT=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/include/debug/netx.S b/arch/arm/include/debug/netx.S
deleted file mode 100644
index 08afc58885d3..000000000000
--- a/arch/arm/include/debug/netx.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
-*/
-
-#define UART_DATA 0
-#define UART_FLAG 0x18
-#define UART_FLAG_BUSY (1 << 3)
-
- .macro addruart, rp, rv, tmp
- ldr \rp, =CONFIG_DEBUG_UART_PHYS
- ldr \rv, =CONFIG_DEBUG_UART_VIRT
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #UART_DATA]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #UART_FLAG]
- tst \rd, #UART_FLAG_BUSY
- bne 1002b
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #UART_FLAG]
- tst \rd, #UART_FLAG_BUSY
- bne 1001b
- .endm
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 0bff0176db2c..b25c54585048 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -31,7 +31,6 @@ else
endif
ifeq ($(CONFIG_ARCH_RPC),y)
- lib-y += ecard.o io-acorn.o floppydma.o
AFLAGS_delay-loop.o += -march=armv4
endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index da85e64143e9..d5af6aedc02c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -15,6 +15,7 @@
#include <linux/suspend.h>
#include <linux/clk/at91_pmc.h>
+#include <linux/platform_data/atmel.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 4ef1e55f4a0b..5e5f1fabc3d4 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -208,6 +208,7 @@ config ARCH_BCM_63XX
config ARCH_BRCMSTB
bool "Broadcom BCM7XXX based boards"
depends on ARCH_MULTI_V7
+ select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
@@ -217,6 +218,7 @@ config ARCH_BRCMSTB
select ZONE_DMA if ARM_LPAE
select SOC_BRCMSTB
select SOC_BUS
+ select PINCTRL
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 8fd23b263c60..b59c813b1af4 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -40,9 +40,6 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
# Support for secure monitor traps
obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
-ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec)
-CFLAGS_bcm_kona_smc.o += -Wa,-march=armv7-a+sec -DREQUIRES_SEC
-endif
# BCM2835
obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c
index 83dd0c10fa47..641e1f8fcf5e 100644
--- a/arch/arm/mach-bcm/bcm63xx_smp.c
+++ b/arch/arm/mach-bcm/bcm63xx_smp.c
@@ -141,6 +141,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu,
* return
*/
ret = bcm63xx_pmb_power_on_cpu(dn);
+ of_node_put(dn);
if (ret)
goto out;
out:
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index a55a7ecf146a..541e850a736c 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -125,9 +125,7 @@ static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys)
__asmeq("%2", "r4")
__asmeq("%3", "r5")
__asmeq("%4", "r6")
-#ifdef REQUIRES_SEC
".arch_extension sec\n"
-#endif
" smc #0\n"
: "=r" (ip), "=r" (r0)
: "r" (r4), "r" (r5), "r" (r6)
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index b81bb386951d..1238ac801530 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -38,6 +38,7 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
return;
}
base = of_iomap(np_wdog, 0);
+ of_node_put(np_wdog);
if (!base) {
pr_emerg("Couldn't map brcm,kona-wdt\n");
return;
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
index 12379960e982..4555f21e7077 100644
--- a/arch/arm/mach-bcm/platsmp-brcmstb.c
+++ b/arch/arm/mach-bcm/platsmp-brcmstb.c
@@ -334,11 +334,14 @@ static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
rc = setup_hifcpubiuctrl_regs(np);
if (rc)
- return;
+ goto out_put_node;
rc = setup_hifcont_regs(np);
if (rc)
- return;
+ goto out_put_node;
+
+out_put_node:
+ of_node_put(np);
}
static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 31ae3be5741d..0628e7d7dcf3 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -631,13 +631,12 @@ static void da850_evm_bb_keys_init(unsigned gpio)
}
}
-#define DA850_N_BB_USER_LED 2
-
static struct gpio_led da850_evm_bb_leds[] = {
- [0 ... DA850_N_BB_USER_LED - 1] = {
- .active_low = 1,
- .gpio = -1, /* assigned at runtime */
- .name = NULL, /* assigned at runtime */
+ {
+ .name = "user_led2",
+ },
+ {
+ .name = "user_led1",
},
};
@@ -646,6 +645,20 @@ static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
};
+static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("i2c-bb-expander",
+ DA850_EVM_BB_EXP_USER_LED2, NULL,
+ 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("i2c-bb-expander",
+ DA850_EVM_BB_EXP_USER_LED2 + 1, NULL,
+ 1, GPIO_ACTIVE_LOW),
+
+ { },
+ },
+};
+
static struct platform_device da850_evm_bb_leds_device = {
.name = "leds-gpio",
.id = -1,
@@ -654,20 +667,6 @@ static struct platform_device da850_evm_bb_leds_device = {
}
};
-static void da850_evm_bb_leds_init(unsigned gpio)
-{
- int i;
- struct gpio_led *led;
-
- for (i = 0; i < DA850_N_BB_USER_LED; i++) {
- led = &da850_evm_bb_leds[i];
-
- led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i;
- led->name =
- da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i];
- }
-}
-
static int da850_evm_bb_expander_setup(struct i2c_client *client,
unsigned gpio, unsigned ngpio,
void *c)
@@ -685,7 +684,7 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client,
goto io_exp_setup_sw_fail;
}
- da850_evm_bb_leds_init(gpio);
+ gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table);
ret = platform_device_register(&da850_evm_bb_leds_device);
if (ret) {
pr_warn("Could not register baseboard GPIO expander LEDs");
@@ -729,10 +728,12 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
},
{
I2C_BOARD_INFO("tca6416", 0x20),
+ .dev_name = "ui-expander",
.platform_data = &da850_evm_ui_expander_info,
},
{
I2C_BOARD_INFO("tca6416", 0x21),
+ .dev_name = "bb-expander",
.platform_data = &da850_evm_bb_expander_info,
},
};
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 1c518b8ee520..d7422233a130 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -49,6 +49,7 @@ config S5P_DEV_MFC
config ARCH_EXYNOS3
bool "SAMSUNG EXYNOS3"
+ default y
select ARM_CPU_SUSPEND if PM
help
Samsung EXYNOS3 (Cortex-A7) SoC based systems
@@ -106,7 +107,7 @@ config SOC_EXYNOS5420
bool "SAMSUNG EXYNOS5420"
default y
depends on ARCH_EXYNOS5
- select MCPM if SMP
+ select EXYNOS_MCPM if SMP
select ARM_CCI400_PORT_CTRL
select ARM_CPU_SUSPEND
@@ -115,6 +116,10 @@ config SOC_EXYNOS5800
default y
depends on SOC_EXYNOS5420
+config EXYNOS_MCPM
+ bool
+ select MCPM
+
config EXYNOS_CPU_SUSPEND
bool
select ARM_CPU_SUSPEND
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 264dbaa89c3d..0fd3fcf8bfb0 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -14,9 +14,5 @@ obj-$(CONFIG_PM_SLEEP) += suspend.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec)
-
-obj-$(CONFIG_MCPM) += mcpm-exynos.o
+obj-$(CONFIG_EXYNOS_MCPM) += mcpm-exynos.o
CFLAGS_mcpm-exynos.o += -march=armv7-a
diff --git a/arch/arm/mach-exynos/exynos-smc.S b/arch/arm/mach-exynos/exynos-smc.S
index d259532ba937..6da31e6a7acb 100644
--- a/arch/arm/mach-exynos/exynos-smc.S
+++ b/arch/arm/mach-exynos/exynos-smc.S
@@ -10,7 +10,8 @@
/*
* Function signature: void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3)
*/
-
+ .arch armv7-a
+ .arch_extension sec
ENTRY(exynos_smc)
stmfd sp!, {r4-r11, lr}
dsb
diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S
index 2783c3a0c06a..ed93f91853b8 100644
--- a/arch/arm/mach-exynos/sleep.S
+++ b/arch/arm/mach-exynos/sleep.S
@@ -44,7 +44,8 @@ ENTRY(exynos_cpu_resume)
ENDPROC(exynos_cpu_resume)
.align
-
+ .arch armv7-a
+ .arch_extension sec
ENTRY(exynos_cpu_resume_ns)
mrc p15, 0, r0, c0, c0, 0
ldr r1, =CPU_MASK
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index be122af0de8f..6a0d3448ea00 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -268,7 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- if (IS_ENABLED(CONFIG_MCPM)) {
+ if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) {
mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
mcpm_cpu_suspend();
}
@@ -285,7 +285,7 @@ static void exynos_pm_set_wakeup_mask(void)
* Set wake-up mask registers
* EXYNOS_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend.
*/
- pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
+ pmu_raw_writel(exynos_irqwake_intmask & ~BIT(31), S5P_WAKEUP_MASK);
}
static void exynos_pm_enter_sleep_mode(void)
@@ -351,7 +351,7 @@ static void exynos5420_pm_prepare(void)
exynos_pm_enter_sleep_mode();
/* ensure at least INFORM0 has the resume address */
- if (IS_ENABLED(CONFIG_MCPM))
+ if (IS_ENABLED(CONFIG_EXYNOS_MCPM))
pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0);
tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0));
@@ -455,7 +455,7 @@ static void exynos5420_prepare_pm_resume(void)
mpidr = read_cpuid_mpidr();
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
- if (IS_ENABLED(CONFIG_MCPM))
+ if (IS_ENABLED(CONFIG_EXYNOS_MCPM))
WARN_ON(mcpm_cpu_powered_up());
if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) {
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index 7e6732c16862..71cc68041d92 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-y := highbank.o system.o smc.o
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
-
obj-$(CONFIG_PM_SLEEP) += pm.o
diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S
index b16c0442e812..78b3f19e7f37 100644
--- a/arch/arm/mach-highbank/smc.S
+++ b/arch/arm/mach-highbank/smc.S
@@ -13,7 +13,8 @@
* the monitor API number.
* Function signature : void highbank_smc1(u32 fn, u32 arg)
*/
-
+ .arch armv7-a
+ .arch_extension sec
ENTRY(highbank_smc1)
stmfd sp!, {r4-r11, lr}
mov r12, r0
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index a2441ed6b673..39a7d9393641 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -14,22 +14,22 @@
#include "hardware.h"
static int num_idle_cpus = 0;
-static DEFINE_SPINLOCK(cpuidle_lock);
+static DEFINE_RAW_SPINLOCK(cpuidle_lock);
static int imx6q_enter_wait(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
- spin_lock(&cpuidle_lock);
+ raw_spin_lock(&cpuidle_lock);
if (++num_idle_cpus == num_online_cpus())
imx6_set_lpm(WAIT_UNCLOCKED);
- spin_unlock(&cpuidle_lock);
+ raw_spin_unlock(&cpuidle_lock);
cpu_do_idle();
- spin_lock(&cpuidle_lock);
+ raw_spin_lock(&cpuidle_lock);
if (num_idle_cpus-- == num_online_cpus())
imx6_set_lpm(WAIT_CLOCKED);
- spin_unlock(&cpuidle_lock);
+ raw_spin_unlock(&cpuidle_lock);
return index;
}
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index dec5d90a66ce..95713450591a 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -94,6 +94,12 @@ static void __init imx7d_init_machine(void)
imx7d_enet_init();
}
+static void __init imx7d_init_late(void)
+{
+ if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
+ platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
+}
+
static void __init imx7d_init_irq(void)
{
imx_init_revision_from_anatop();
@@ -110,5 +116,6 @@ static const char *const imx7d_dt_compat[] __initconst = {
DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
.init_irq = imx7d_init_irq,
.init_machine = imx7d_init_machine,
+ .init_late = imx7d_init_late,
.dt_compat = imx7d_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index f8b0dccac8dc..739b38be5696 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -1,9 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-y := keystone.o smc.o
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
-
obj-$(CONFIG_SMP) += platsmp.o
# PM domain driver for Keystone SOCs
diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S
index 76d0bf6ac73c..21ef75cf5370 100644
--- a/arch/arm/mach-keystone/smc.S
+++ b/arch/arm/mach-keystone/smc.S
@@ -18,6 +18,7 @@
*
* Return: Non zero value on failure
*/
+ .arch_extension sec
ENTRY(keystone_cpu_smc)
stmfd sp!, {r4-r11, lr}
smc #0
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 85d1b13c9215..600650551621 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -41,18 +41,10 @@ obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o
obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common)
obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-common) $(smp-y) sleep44xx.o
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec)
-
# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
-AFLAGS_sram242x.o :=-Wa,-march=armv6
-AFLAGS_sram243x.o :=-Wa,-march=armv6
-
# Restart code (OMAP4/5 currently in omap4-common.c)
obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o
@@ -94,11 +86,6 @@ obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
-AFLAGS_sleep24xx.o :=-Wa,-march=armv6
-AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep33xx.o :=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep43xx.o :=-Wa,-march=armv7-a$(plus_sec)
-
endif
ifeq ($(CONFIG_CPU_IDLE),y)
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 7d0db77ab8cb..1762f919941f 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -55,6 +55,8 @@ ENDPROC(omap5_secondary_startup)
* omap5_secondary_startup if the primary CPU was put into HYP mode by
* the boot loader.
*/
+ .arch armv7-a
+ .arch_extension sec
ENTRY(omap5_secondary_hyp_startup)
wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
ldr r0, [r2]
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index 630b9bd099e0..fd2bcd91f4a1 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -20,7 +20,8 @@
* link register "lr".
* Function signature : void omap_smc1(u32 fn, u32 arg)
*/
-
+ .arch armv7-a
+ .arch_extension sec
ENTRY(omap_smc1)
stmfd sp!, {r2-r12, lr}
mov r12, r0
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 4c3543bae562..adb6271f819b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -529,7 +529,7 @@ static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
.sysc_fields = &omap_hwmod_sysc_type1,
};
-struct omap_hwmod_class am33xx_gpio_hwmod_class = {
+static struct omap_hwmod_class am33xx_gpio_hwmod_class = {
.name = "gpio",
.sysc = &am33xx_gpio_sysc,
};
@@ -539,7 +539,7 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio1_dbclk" },
};
-struct omap_hwmod am33xx_gpio1_hwmod = {
+static struct omap_hwmod am33xx_gpio1_hwmod = {
.name = "gpio2",
.class = &am33xx_gpio_hwmod_class,
.clkdm_name = "l4ls_clkdm",
@@ -559,7 +559,7 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio2_dbclk" },
};
-struct omap_hwmod am33xx_gpio2_hwmod = {
+static struct omap_hwmod am33xx_gpio2_hwmod = {
.name = "gpio3",
.class = &am33xx_gpio_hwmod_class,
.clkdm_name = "l4ls_clkdm",
@@ -579,7 +579,7 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio3_dbclk" },
};
-struct omap_hwmod am33xx_gpio3_hwmod = {
+static struct omap_hwmod am33xx_gpio3_hwmod = {
.name = "gpio4",
.class = &am33xx_gpio_hwmod_class,
.clkdm_name = "l4ls_clkdm",
diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
index 47a816468cdb..68fee339d3f1 100644
--- a/arch/arm/mach-omap2/sleep33xx.S
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -24,6 +24,7 @@
#define BIT(nr) (1 << (nr))
.arm
+ .arch armv7-a
.align 3
ENTRY(am33xx_do_wfi)
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 75ea4723ec0e..ac1324c6453b 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -83,6 +83,8 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore)
*
* r0 = physical address of the parameters
*/
+ .arch armv7-a
+ .arch_extension sec
ENTRY(save_secure_ram_context)
stmfd sp!, {r4 - r11, lr} @ save registers on stack
mov r3, r0 @ physical address of parameters
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
index 0c1031442571..c1f4e4852644 100644
--- a/arch/arm/mach-omap2/sleep43xx.S
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -56,6 +56,8 @@
#define RTC_PMIC_EXT_WAKEUP_EN BIT(0)
.arm
+ .arch armv7-a
+ .arch_extension sec
.align 3
ENTRY(am43xx_do_wfi)
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 934033ad847f..f60f6a9aed73 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -18,8 +18,11 @@
#include "omap44xx.h"
#include "omap4-sar-layout.h"
+ .arch armv7-a
+
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
+ .arch_extension sec
.macro DO_SMC
dsb
smc #0
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 72b5c3db37dc..a3af4a2f9446 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -47,7 +47,3 @@
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32)
-
-#ifndef __ASSEMBLY__
-extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
-#endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a3ecccc24ec5..742d18a1f7dc 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -116,12 +116,11 @@ void lubbock_set_hexled(uint32_t value)
static struct gpio_chip *lubbock_misc_wr_gc;
-void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
+static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
{
unsigned long m = mask, v = set;
lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
}
-EXPORT_SYMBOL(lubbock_set_misc_wr);
static int lubbock_udc_is_connected(void)
{
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 909fffee0240..649e0a54784c 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -269,19 +269,25 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
sram_base_addr = of_iomap(node, 0);
if (!sram_base_addr) {
pr_err("%s: could not map sram registers\n", __func__);
+ of_node_put(node);
return;
}
- if (has_pmu && rockchip_smp_prepare_pmu())
+ if (has_pmu && rockchip_smp_prepare_pmu()) {
+ of_node_put(node);
return;
+ }
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
- if (rockchip_smp_prepare_sram(node))
+ if (rockchip_smp_prepare_sram(node)) {
+ of_node_put(node);
return;
+ }
/* enable the SCU power domain */
pmu_set_power_domain(PMU_PWRDN_SCU, true);
+ of_node_put(node);
node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
if (!node) {
pr_err("%s: missing scu\n", __func__);
@@ -291,6 +297,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
scu_base_addr = of_iomap(node, 0);
if (!scu_base_addr) {
pr_err("%s: could not map scu registers\n", __func__);
+ of_node_put(node);
return;
}
@@ -309,6 +316,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
ncores = ((l2ctlr >> 24) & 0x3) + 1;
}
+ of_node_put(node);
/* Make sure that all cores except the first are really off */
for (i = 1; i < ncores; i++)
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index 744b5b332e42..87389d9456b9 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -257,12 +257,14 @@ static int __init rk3288_suspend_init(struct device_node *np)
rk3288_bootram_base = of_iomap(sram_np, 0);
if (!rk3288_bootram_base) {
pr_err("%s: could not map bootram base\n", __func__);
+ of_node_put(sram_np);
return -ENOMEM;
}
ret = of_address_to_resource(sram_np, 0, &res);
if (ret) {
pr_err("%s: could not get bootram phy addr\n", __func__);
+ of_node_put(sram_np);
return ret;
}
rk3288_bootram_phy = res.start;
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index 056ef5460290..90a645a18444 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -5,4 +5,5 @@
# Object file lists.
-obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o
+obj-y :=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \
+ riscpc.o time.o
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 488d5c3b37f4..50e0f97afd75 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -24,10 +24,11 @@
struct iomd_dma {
struct dma_struct dma;
- unsigned int state;
- unsigned long base; /* Controller base address */
+ void __iomem *base; /* Controller base address */
int irq; /* Controller IRQ */
- struct scatterlist cur_sg; /* Current controller buffer */
+ unsigned int state;
+ dma_addr_t cur_addr;
+ unsigned int cur_len;
dma_addr_t dma_addr;
unsigned int dma_len;
};
@@ -50,13 +51,13 @@ typedef enum {
#define CR (IOMD_IO0CR - IOMD_IO0CURA)
#define ST (IOMD_IO0ST - IOMD_IO0CURA)
-static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
+static void iomd_get_next_sg(struct iomd_dma *idma)
{
unsigned long end, offset, flags = 0;
if (idma->dma.sg) {
- sg->dma_address = idma->dma_addr;
- offset = sg->dma_address & ~PAGE_MASK;
+ idma->cur_addr = idma->dma_addr;
+ offset = idma->cur_addr & ~PAGE_MASK;
end = offset + idma->dma_len;
@@ -66,7 +67,7 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
if (offset + TRANSFER_SIZE >= end)
flags |= DMA_END_L;
- sg->length = end - TRANSFER_SIZE;
+ idma->cur_len = end - TRANSFER_SIZE;
idma->dma_len -= end - offset;
idma->dma_addr += end - offset;
@@ -84,52 +85,49 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
}
} else {
flags = DMA_END_S | DMA_END_L;
- sg->dma_address = 0;
- sg->length = 0;
+ idma->cur_addr = 0;
+ idma->cur_len = 0;
}
- sg->length |= flags;
+ idma->cur_len |= flags;
}
static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
{
struct iomd_dma *idma = dev_id;
- unsigned long base = idma->base;
+ void __iomem *base = idma->base;
+ unsigned int state = idma->state;
+ unsigned int status, cur, end;
do {
- unsigned int status;
-
- status = iomd_readb(base + ST);
+ status = readb(base + ST);
if (!(status & DMA_ST_INT))
- return IRQ_HANDLED;
-
- if ((idma->state ^ status) & DMA_ST_AB)
- iomd_get_next_sg(&idma->cur_sg, idma);
-
- switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
- case DMA_ST_OFL: /* OIA */
- case DMA_ST_AB: /* .IB */
- iomd_writel(idma->cur_sg.dma_address, base + CURA);
- iomd_writel(idma->cur_sg.length, base + ENDA);
- idma->state = DMA_ST_AB;
- break;
-
- case DMA_ST_OFL | DMA_ST_AB: /* OIB */
- case 0: /* .IA */
- iomd_writel(idma->cur_sg.dma_address, base + CURB);
- iomd_writel(idma->cur_sg.length, base + ENDB);
- idma->state = 0;
- break;
+ goto out;
+
+ if ((state ^ status) & DMA_ST_AB)
+ iomd_get_next_sg(idma);
+
+ // This efficiently implements state = OFL != AB ? AB : 0
+ state = ((status >> 2) ^ status) & DMA_ST_AB;
+ if (state) {
+ cur = CURA;
+ end = ENDA;
+ } else {
+ cur = CURB;
+ end = ENDB;
}
+ writel(idma->cur_addr, base + cur);
+ writel(idma->cur_len, base + end);
if (status & DMA_ST_OFL &&
- idma->cur_sg.length == (DMA_END_S|DMA_END_L))
+ idma->cur_len == (DMA_END_S|DMA_END_L))
break;
} while (1);
- idma->state = ~DMA_ST_AB;
- disable_irq(irq);
-
+ state = ~DMA_ST_AB;
+ disable_irq_nosync(irq);
+out:
+ idma->state = state;
return IRQ_HANDLED;
}
@@ -157,7 +155,7 @@ static struct device isa_dma_dev = {
static void iomd_enable_dma(unsigned int chan, dma_t *dma)
{
struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
- unsigned long dma_base = idma->base;
+ void __iomem *base = idma->base;
unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
if (idma->dma.invalid) {
@@ -177,27 +175,30 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma)
DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
- iomd_writeb(DMA_CR_C, dma_base + CR);
+ idma->dma_addr = idma->dma.sg->dma_address;
+ idma->dma_len = idma->dma.sg->length;
+
+ writeb(DMA_CR_C, base + CR);
idma->state = DMA_ST_AB;
}
if (idma->dma.dma_mode == DMA_MODE_READ)
ctrl |= DMA_CR_D;
- iomd_writeb(ctrl, dma_base + CR);
+ writeb(ctrl, base + CR);
enable_irq(idma->irq);
}
static void iomd_disable_dma(unsigned int chan, dma_t *dma)
{
struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
- unsigned long dma_base = idma->base;
+ void __iomem *base = idma->base;
unsigned long flags;
local_irq_save(flags);
if (idma->state != ~DMA_ST_AB)
disable_irq(idma->irq);
- iomd_writeb(0, dma_base + CR);
+ writeb(0, base + CR);
local_irq_restore(flags);
}
@@ -360,17 +361,17 @@ static int __init rpc_dma_init(void)
*/
iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
- iomd_dma[DMA_0].base = IOMD_IO0CURA;
+ iomd_dma[DMA_0].base = IOMD_BASE + IOMD_IO0CURA;
iomd_dma[DMA_0].irq = IRQ_DMA0;
- iomd_dma[DMA_1].base = IOMD_IO1CURA;
+ iomd_dma[DMA_1].base = IOMD_BASE + IOMD_IO1CURA;
iomd_dma[DMA_1].irq = IRQ_DMA1;
- iomd_dma[DMA_2].base = IOMD_IO2CURA;
+ iomd_dma[DMA_2].base = IOMD_BASE + IOMD_IO2CURA;
iomd_dma[DMA_2].irq = IRQ_DMA2;
- iomd_dma[DMA_3].base = IOMD_IO3CURA;
+ iomd_dma[DMA_3].base = IOMD_BASE + IOMD_IO3CURA;
iomd_dma[DMA_3].irq = IRQ_DMA3;
- iomd_dma[DMA_S0].base = IOMD_SD0CURA;
+ iomd_dma[DMA_S0].base = IOMD_BASE + IOMD_SD0CURA;
iomd_dma[DMA_S0].irq = IRQ_DMAS0;
- iomd_dma[DMA_S1].base = IOMD_SD1CURA;
+ iomd_dma[DMA_S1].base = IOMD_BASE + IOMD_SD1CURA;
iomd_dma[DMA_S1].irq = IRQ_DMAS1;
for (i = DMA_0; i <= DMA_S1; i++) {
diff --git a/arch/arm/lib/ecard.S b/arch/arm/mach-rpc/ecard-loader.S
index eb8ac0412da6..eb8ac0412da6 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/mach-rpc/ecard-loader.S
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index cf0593bc42d2..75cfad2cb143 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -67,17 +67,21 @@ struct expcard_blacklist {
unsigned short manufacturer;
unsigned short product;
const char *type;
+ void (*init)(ecard_t *ec);
};
static ecard_t *cards;
static ecard_t *slot_to_expcard[MAX_ECARDS];
static unsigned int ectcr;
+static void atomwide_3p_quirk(ecard_t *ec);
+
/* List of descriptions of cards which don't have an extended
* identification, or chunk directories containing a description.
*/
static struct expcard_blacklist __initdata blacklist[] = {
- { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }
+ { MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" },
+ { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk },
};
asmlinkage extern int
@@ -493,18 +497,21 @@ static void ecard_dump_irq_state(void)
printk("Expansion card IRQ state:\n");
for (ec = cards; ec; ec = ec->next) {
+ const char *claimed;
+
if (ec->slot_no == 8)
continue;
- printk(" %d: %sclaimed, ",
- ec->slot_no, ec->claimed ? "" : "not ");
+ claimed = ec->claimed ? "" : "not ";
if (ec->ops && ec->ops->irqpending &&
ec->ops != &ecard_default_ops)
- printk("irq %spending\n",
+ printk(" %d: %sclaimed irq %spending\n",
+ ec->slot_no, claimed,
ec->ops->irqpending(ec) ? "" : "not ");
else
- printk("irqaddr %p, mask = %02X, status = %02X\n",
+ printk(" %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n",
+ ec->slot_no, claimed,
ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
}
}
@@ -865,6 +872,16 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
}
EXPORT_SYMBOL(ecardm_iomap);
+static void atomwide_3p_quirk(ecard_t *ec)
+{
+ void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC);
+ unsigned int i;
+
+ /* Disable interrupts on each port */
+ for (i = 0x2000; i <= 0x2800; i += 0x0400)
+ writeb(0, addr + i + 4);
+}
+
/*
* Probe for an expansion card.
*
@@ -921,7 +938,10 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
for (i = 0; i < ARRAY_SIZE(blacklist); i++)
if (blacklist[i].manufacturer == ec->cid.manufacturer &&
blacklist[i].product == ec->cid.product) {
- ec->card_desc = blacklist[i].type;
+ if (blacklist[i].type)
+ ec->card_desc = blacklist[i].type;
+ if (blacklist[i].init)
+ blacklist[i].init(ec);
break;
}
diff --git a/arch/arm/lib/floppydma.S b/arch/arm/mach-rpc/floppydma.S
index 6698b83050dc..6698b83050dc 100644
--- a/arch/arm/lib/floppydma.S
+++ b/arch/arm/mach-rpc/floppydma.S
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index a023b5f9bbbb..1fbe7eb956fd 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -115,29 +115,22 @@ static void arch_decomp_setup(void)
struct tag *t = (struct tag *)params;
unsigned int nr_pages = 0, page_size = PAGE_SIZE;
- if (t->hdr.tag == ATAG_CORE)
- {
- for (; t->hdr.size; t = tag_next(t))
- {
- if (t->hdr.tag == ATAG_VIDEOTEXT)
- {
+ if (t->hdr.tag == ATAG_CORE) {
+ for (; t->hdr.size; t = tag_next(t)) {
+ if (t->hdr.tag == ATAG_VIDEOTEXT) {
video_num_rows = t->u.videotext.video_lines;
video_num_cols = t->u.videotext.video_cols;
- bytes_per_char_h = t->u.videotext.video_points;
- bytes_per_char_v = t->u.videotext.video_points;
video_x = t->u.videotext.x;
video_y = t->u.videotext.y;
- }
-
- if (t->hdr.tag == ATAG_MEM)
- {
+ } else if (t->hdr.tag == ATAG_VIDEOLFB) {
+ bytes_per_char_h = t->u.videolfb.lfb_depth;
+ bytes_per_char_v = 8;
+ } else if (t->hdr.tag == ATAG_MEM) {
page_size = PAGE_SIZE;
nr_pages += (t->u.mem.size / PAGE_SIZE);
}
}
- }
- else
- {
+ } else {
nr_pages = params->nr_pages;
page_size = params->page_size;
video_num_rows = params->video_num_rows;
diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S
index b9082a2a2a01..b9082a2a2a01 100644
--- a/arch/arm/lib/io-acorn.S
+++ b/arch/arm/mach-rpc/io-acorn.S
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index b8a61cb11207..803aeb126f0e 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -8,117 +8,71 @@
#include <asm/irq.h>
#include <asm/fiq.h>
-static void iomd_ack_irq_a(struct irq_data *d)
-{
- unsigned int val, mask;
-
- mask = 1 << d->irq;
- val = iomd_readb(IOMD_IRQMASKA);
- iomd_writeb(val & ~mask, IOMD_IRQMASKA);
- iomd_writeb(mask, IOMD_IRQCLRA);
-}
-
-static void iomd_mask_irq_a(struct irq_data *d)
-{
- unsigned int val, mask;
+// These are offsets from the stat register for each IRQ bank
+#define STAT 0x00
+#define REQ 0x04
+#define CLR 0x04
+#define MASK 0x08
- mask = 1 << d->irq;
- val = iomd_readb(IOMD_IRQMASKA);
- iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-}
-
-static void iomd_unmask_irq_a(struct irq_data *d)
+static void __iomem *iomd_get_base(struct irq_data *d)
{
- unsigned int val, mask;
+ void *cd = irq_data_get_irq_chip_data(d);
- mask = 1 << d->irq;
- val = iomd_readb(IOMD_IRQMASKA);
- iomd_writeb(val | mask, IOMD_IRQMASKA);
+ return (void __iomem *)(unsigned long)cd;
}
-static struct irq_chip iomd_a_chip = {
- .irq_ack = iomd_ack_irq_a,
- .irq_mask = iomd_mask_irq_a,
- .irq_unmask = iomd_unmask_irq_a,
-};
-
-static void iomd_mask_irq_b(struct irq_data *d)
+static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask)
{
- unsigned int val, mask;
+ struct irq_data *d = irq_get_irq_data(irq);
- mask = 1 << (d->irq & 7);
- val = iomd_readb(IOMD_IRQMASKB);
- iomd_writeb(val & ~mask, IOMD_IRQMASKB);
+ d->mask = mask;
+ irq_set_chip_data(irq, (void *)(unsigned long)base);
}
-static void iomd_unmask_irq_b(struct irq_data *d)
+static void iomd_irq_mask_ack(struct irq_data *d)
{
- unsigned int val, mask;
+ void __iomem *base = iomd_get_base(d);
+ unsigned int val, mask = d->mask;
- mask = 1 << (d->irq & 7);
- val = iomd_readb(IOMD_IRQMASKB);
- iomd_writeb(val | mask, IOMD_IRQMASKB);
+ val = readb(base + MASK);
+ writeb(val & ~mask, base + MASK);
+ writeb(mask, base + CLR);
}
-static struct irq_chip iomd_b_chip = {
- .irq_ack = iomd_mask_irq_b,
- .irq_mask = iomd_mask_irq_b,
- .irq_unmask = iomd_unmask_irq_b,
-};
-
-static void iomd_mask_irq_dma(struct irq_data *d)
+static void iomd_irq_mask(struct irq_data *d)
{
- unsigned int val, mask;
+ void __iomem *base = iomd_get_base(d);
+ unsigned int val, mask = d->mask;
- mask = 1 << (d->irq & 7);
- val = iomd_readb(IOMD_DMAMASK);
- iomd_writeb(val & ~mask, IOMD_DMAMASK);
+ val = readb(base + MASK);
+ writeb(val & ~mask, base + MASK);
}
-static void iomd_unmask_irq_dma(struct irq_data *d)
+static void iomd_irq_unmask(struct irq_data *d)
{
- unsigned int val, mask;
+ void __iomem *base = iomd_get_base(d);
+ unsigned int val, mask = d->mask;
- mask = 1 << (d->irq & 7);
- val = iomd_readb(IOMD_DMAMASK);
- iomd_writeb(val | mask, IOMD_DMAMASK);
+ val = readb(base + MASK);
+ writeb(val | mask, base + MASK);
}
-static struct irq_chip iomd_dma_chip = {
- .irq_ack = iomd_mask_irq_dma,
- .irq_mask = iomd_mask_irq_dma,
- .irq_unmask = iomd_unmask_irq_dma,
+static struct irq_chip iomd_chip_clr = {
+ .irq_mask_ack = iomd_irq_mask_ack,
+ .irq_mask = iomd_irq_mask,
+ .irq_unmask = iomd_irq_unmask,
};
-static void iomd_mask_irq_fiq(struct irq_data *d)
-{
- unsigned int val, mask;
-
- mask = 1 << (d->irq & 7);
- val = iomd_readb(IOMD_FIQMASK);
- iomd_writeb(val & ~mask, IOMD_FIQMASK);
-}
-
-static void iomd_unmask_irq_fiq(struct irq_data *d)
-{
- unsigned int val, mask;
-
- mask = 1 << (d->irq & 7);
- val = iomd_readb(IOMD_FIQMASK);
- iomd_writeb(val | mask, IOMD_FIQMASK);
-}
-
-static struct irq_chip iomd_fiq_chip = {
- .irq_ack = iomd_mask_irq_fiq,
- .irq_mask = iomd_mask_irq_fiq,
- .irq_unmask = iomd_unmask_irq_fiq,
+static struct irq_chip iomd_chip_noclr = {
+ .irq_mask = iomd_irq_mask,
+ .irq_unmask = iomd_irq_unmask,
};
extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
void __init rpc_init_irq(void)
{
- unsigned int irq, clr, set = 0;
+ unsigned int irq, clr, set;
iomd_writeb(0, IOMD_IRQMASKA);
iomd_writeb(0, IOMD_IRQMASKB);
@@ -130,6 +84,7 @@ void __init rpc_init_irq(void)
for (irq = 0; irq < NR_IRQS; irq++) {
clr = IRQ_NOREQUEST;
+ set = 0;
if (irq <= 6 || (irq >= 9 && irq <= 15))
clr |= IRQ_NOPROBE;
@@ -140,30 +95,37 @@ void __init rpc_init_irq(void)
switch (irq) {
case 0 ... 7:
- irq_set_chip_and_handler(irq, &iomd_a_chip,
+ irq_set_chip_and_handler(irq, &iomd_chip_clr,
handle_level_irq);
irq_modify_status(irq, clr, set);
+ iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA,
+ BIT(irq));
break;
case 8 ... 15:
- irq_set_chip_and_handler(irq, &iomd_b_chip,
+ irq_set_chip_and_handler(irq, &iomd_chip_noclr,
handle_level_irq);
irq_modify_status(irq, clr, set);
+ iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB,
+ BIT(irq - 8));
break;
case 16 ... 21:
- irq_set_chip_and_handler(irq, &iomd_dma_chip,
+ irq_set_chip_and_handler(irq, &iomd_chip_noclr,
handle_level_irq);
irq_modify_status(irq, clr, set);
+ iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT,
+ BIT(irq - 16));
break;
case 64 ... 71:
- irq_set_chip(irq, &iomd_fiq_chip);
+ irq_set_chip(irq, &iomd_chip_noclr);
irq_modify_status(irq, clr, set);
+ iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT,
+ BIT(irq - 64));
break;
}
}
init_FIQ(FIQ_START);
}
-
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index e97f93a0af1d..1d750152b160 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -10,7 +10,7 @@
* 04-Dec-1997 RMK Updated for new arch/arm/time.c
* 13=Jun-2004 DS Moved to arch/arm/common b/c shared w/CLPS7500
*/
-#include <linux/timex.h>
+#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -24,11 +24,15 @@
#define RPC_CLOCK_FREQ 2000000
#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
-static u32 ioc_timer_gettimeoffset(void)
+static u32 ioc_time;
+
+static u64 ioc_timer_read(struct clocksource *cs)
{
unsigned int count1, count2, status;
- long offset;
+ unsigned long flags;
+ u32 ticks;
+ local_irq_save(flags);
ioc_writeb (0, IOC_T0LATCH);
barrier ();
count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
@@ -38,27 +42,34 @@ static u32 ioc_timer_gettimeoffset(void)
ioc_writeb (0, IOC_T0LATCH);
barrier ();
count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
+ ticks = ioc_time + RPC_LATCH - count2;
+ local_irq_restore(flags);
- offset = count2;
if (count2 < count1) {
/*
- * We have not had an interrupt between reading count1
- * and count2.
+ * The timer has not reloaded between reading count1 and
+ * count2, check whether an interrupt was actually pending.
*/
if (status & (1 << 5))
- offset -= RPC_LATCH;
+ ticks += RPC_LATCH;
} else if (count2 > count1) {
/*
- * We have just had another interrupt between reading
- * count1 and count2.
+ * The timer has reloaded, so count2 indicates the new
+ * count since the wrap. The interrupt would not have
+ * been processed, so add the missed ticks.
*/
- offset -= RPC_LATCH;
+ ticks += RPC_LATCH;
}
- offset = (RPC_LATCH - offset) * (tick_nsec / 1000);
- return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000;
+ return ticks;
}
+static struct clocksource ioctime_clocksource = {
+ .read = ioc_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .rating = 100,
+};
+
void __init ioctime_init(void)
{
ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
@@ -69,6 +80,7 @@ void __init ioctime_init(void)
static irqreturn_t
ioc_timer_interrupt(int irq, void *dev_id)
{
+ ioc_time += RPC_LATCH;
timer_tick();
return IRQ_HANDLED;
}
@@ -83,7 +95,7 @@ static struct irqaction ioc_timer_irq = {
*/
void __init ioc_timer_init(void)
{
- arch_gettimeoffset = ioc_timer_gettimeoffset;
+ WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
ioctime_init();
setup_irq(IRQ_TIMER0, &ioc_timer_irq);
}
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index dd8d13fb8450..d96a101e5504 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -519,6 +519,29 @@ static const struct gpio_keys_platform_data assabet_keys_pdata = {
.rep = 0,
};
+static struct gpiod_lookup_table assabet_uart1_gpio_table = {
+ .dev_id = "sa11x0-uart.1",
+ .table = {
+ GPIO_LOOKUP("assabet", 16, "dtr", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("assabet", 17, "rts", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("assabet", 25, "dcd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("assabet", 26, "cts", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("assabet", 27, "dsr", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table assabet_uart3_gpio_table = {
+ .dev_id = "sa11x0-uart.3",
+ .table = {
+ GPIO_LOOKUP("assabet", 28, "cts", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("assabet", 29, "dsr", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("assabet", 30, "dcd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("assabet", 31, "rng", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init assabet_init(void)
{
/*
@@ -565,7 +588,10 @@ static void __init assabet_init(void)
neponset_resources, ARRAY_SIZE(neponset_resources));
#endif
} else {
+ gpiod_add_lookup_table(&assabet_uart1_gpio_table);
+ gpiod_add_lookup_table(&assabet_uart3_gpio_table);
gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table);
+
sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata,
assabet_cf_vcc_consumers,
ARRAY_SIZE(assabet_cf_vcc_consumers),
@@ -655,74 +681,13 @@ static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
if (port->mapbase == _Ser1UTCR0) {
if (state)
- ASSABET_BCR_clear(ASSABET_BCR_RS232EN |
- ASSABET_BCR_COM_RTS |
- ASSABET_BCR_COM_DTR);
- else
- ASSABET_BCR_set(ASSABET_BCR_RS232EN |
- ASSABET_BCR_COM_RTS |
- ASSABET_BCR_COM_DTR);
- }
-}
-
-/*
- * Assabet uses COM_RTS and COM_DTR for both UART1 (com port)
- * and UART3 (radio module). We only handle them for UART1 here.
- */
-static void assabet_set_mctrl(struct uart_port *port, u_int mctrl)
-{
- if (port->mapbase == _Ser1UTCR0) {
- u_int set = 0, clear = 0;
-
- if (mctrl & TIOCM_RTS)
- clear |= ASSABET_BCR_COM_RTS;
+ ASSABET_BCR_clear(ASSABET_BCR_RS232EN);
else
- set |= ASSABET_BCR_COM_RTS;
-
- if (mctrl & TIOCM_DTR)
- clear |= ASSABET_BCR_COM_DTR;
- else
- set |= ASSABET_BCR_COM_DTR;
-
- ASSABET_BCR_clear(clear);
- ASSABET_BCR_set(set);
- }
-}
-
-static u_int assabet_get_mctrl(struct uart_port *port)
-{
- u_int ret = 0;
- u_int bsr = ASSABET_BSR;
-
- /* need 2 reads to read current value */
- bsr = ASSABET_BSR;
-
- if (port->mapbase == _Ser1UTCR0) {
- if (bsr & ASSABET_BSR_COM_DCD)
- ret |= TIOCM_CD;
- if (bsr & ASSABET_BSR_COM_CTS)
- ret |= TIOCM_CTS;
- if (bsr & ASSABET_BSR_COM_DSR)
- ret |= TIOCM_DSR;
- } else if (port->mapbase == _Ser3UTCR0) {
- if (bsr & ASSABET_BSR_RAD_DCD)
- ret |= TIOCM_CD;
- if (bsr & ASSABET_BSR_RAD_CTS)
- ret |= TIOCM_CTS;
- if (bsr & ASSABET_BSR_RAD_DSR)
- ret |= TIOCM_DSR;
- if (bsr & ASSABET_BSR_RAD_RI)
- ret |= TIOCM_RI;
- } else {
- ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+ ASSABET_BCR_set(ASSABET_BCR_RS232EN);
}
-
- return ret;
}
static struct sa1100_port_fns assabet_port_fns __initdata = {
- .set_mctrl = assabet_set_mctrl,
- .get_mctrl = assabet_get_mctrl,
.pm = assabet_uart_pm,
};
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index bc0e0e24ecb7..de79f3502045 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -311,8 +311,6 @@ badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
}
static struct sa1100_port_fns badge4_port_fns __initdata = {
- //.get_mctrl = badge4_get_mctrl,
- //.set_mctrl = badge4_set_mctrl,
.pm = badge4_uart_pm,
};
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index 6199e87447ca..e8691921c69a 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -2,176 +2,144 @@
/*
* linux/arch/arm/mach-sa1100/clock.c
*/
-#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/string.h>
#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <mach/generic.h>
-struct clkops {
- void (*enable)(struct clk *);
- void (*disable)(struct clk *);
- unsigned long (*get_rate)(struct clk *);
+static const char * const clk_tucr_parents[] = {
+ "clk32768", "clk3686400",
};
-struct clk {
- const struct clkops *ops;
- unsigned int enabled;
-};
-
-#define DEFINE_CLK(_name, _ops) \
-struct clk clk_##_name = { \
- .ops = _ops, \
- }
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-/* Dummy clk routine to build generic kernel parts that may be using them */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk_get_rate(clk);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
+static DEFINE_SPINLOCK(tucr_lock);
-struct clk *clk_get_parent(struct clk *clk)
+static int clk_gpio27_enable(struct clk_hw *hw)
{
- return NULL;
-}
-EXPORT_SYMBOL(clk_get_parent);
+ unsigned long flags;
-static void clk_gpio27_enable(struct clk *clk)
-{
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
* (SA-1110 Developer's Manual, section 9.1.2.1)
*/
+ local_irq_save(flags);
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
- TUCR = TUCR_3_6864MHz;
+ local_irq_restore(flags);
+
+ return 0;
}
-static void clk_gpio27_disable(struct clk *clk)
+static void clk_gpio27_disable(struct clk_hw *hw)
{
- TUCR = 0;
+ unsigned long flags;
+
+ local_irq_save(flags);
GPDR &= ~GPIO_32_768kHz;
GAFR &= ~GPIO_32_768kHz;
+ local_irq_restore(flags);
}
-static void clk_cpu_enable(struct clk *clk)
-{
-}
+static const struct clk_ops clk_gpio27_ops = {
+ .enable = clk_gpio27_enable,
+ .disable = clk_gpio27_disable,
+};
-static void clk_cpu_disable(struct clk *clk)
-{
-}
+static const char * const clk_gpio27_parents[] = {
+ "tucr-mux",
+};
-static unsigned long clk_cpu_get_rate(struct clk *clk)
+static const struct clk_init_data clk_gpio27_init_data __initconst = {
+ .name = "gpio27",
+ .ops = &clk_gpio27_ops,
+ .parent_names = clk_gpio27_parents,
+ .num_parents = ARRAY_SIZE(clk_gpio27_parents),
+};
+
+/*
+ * Derived from the table 8-1 in the SA1110 manual, the MPLL appears to
+ * multiply its input rate by 4 x (4 + PPCR). This calculation gives
+ * the exact rate. The figures given in the table are the rates rounded
+ * to 100kHz. Stick with sa11x0_getspeed() for the time being.
+ */
+static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
{
return sa11x0_getspeed(0) * 1000;
}
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- if (clk) {
- spin_lock_irqsave(&clocks_lock, flags);
- if (clk->enabled++ == 0)
- clk->ops->enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
+static const struct clk_ops clk_mpll_ops = {
+ .recalc_rate = clk_mpll_recalc_rate,
+};
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
+static const char * const clk_mpll_parents[] = {
+ "clk3686400",
+};
- if (clk) {
- WARN_ON(clk->enabled == 0);
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->enabled == 0)
- clk->ops->disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- }
-}
-EXPORT_SYMBOL(clk_disable);
+static const struct clk_init_data clk_mpll_init_data __initconst = {
+ .name = "mpll",
+ .ops = &clk_mpll_ops,
+ .parent_names = clk_mpll_parents,
+ .num_parents = ARRAY_SIZE(clk_mpll_parents),
+ .flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL,
+};
-unsigned long clk_get_rate(struct clk *clk)
+int __init sa11xx_clk_init(void)
{
- if (clk && clk->ops && clk->ops->get_rate)
- return clk->ops->get_rate(clk);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_get_rate);
+ struct clk_hw *hw;
+ int ret;
-const struct clkops clk_gpio27_ops = {
- .enable = clk_gpio27_enable,
- .disable = clk_gpio27_disable,
-};
+ hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
-const struct clkops clk_cpu_ops = {
- .enable = clk_cpu_enable,
- .disable = clk_cpu_disable,
- .get_rate = clk_cpu_get_rate,
-};
+ clk_hw_register_clkdev(hw, NULL, "sa1100-rtc");
-static DEFINE_CLK(gpio27, &clk_gpio27_ops);
+ hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
-static DEFINE_CLK(cpu, &clk_cpu_ops);
+ clk_hw_register_clkdev(hw, "OSTIMER0", NULL);
-static unsigned long clk_36864_get_rate(struct clk *clk)
-{
- return 3686400;
-}
+ hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+ if (!hw)
+ return -ENOMEM;
+ hw->init = &clk_mpll_init_data;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ kfree(hw);
+ return ret;
+ }
-static struct clkops clk_36864_ops = {
- .enable = clk_cpu_enable,
- .disable = clk_cpu_disable,
- .get_rate = clk_36864_get_rate,
-};
+ clk_hw_register_clkdev(hw, NULL, "sa11x0-fb");
+ clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia");
+ clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0");
+ clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1");
+ clk_hw_register_clkdev(hw, NULL, "1800");
+
+ hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents,
+ ARRAY_SIZE(clk_tucr_parents), 0,
+ (void __iomem *)&TUCR, FShft(TUCR_TSEL),
+ FAlnMsk(TUCR_TSEL), 0, &tucr_lock);
+ clk_set_rate(hw->clk, 3686400);
+
+ hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+ if (!hw)
+ return -ENOMEM;
+ hw->init = &clk_gpio27_init_data;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ kfree(hw);
+ return ret;
+ }
-static DEFINE_CLK(36864, &clk_36864_ops);
-
-static struct clk_lookup sa11xx_clkregs[] = {
- CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27),
- CLKDEV_INIT("sa1100-rtc", NULL, NULL),
- CLKDEV_INIT("sa11x0-fb", NULL, &clk_cpu),
- CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu),
- CLKDEV_INIT("sa11x0-pcmcia.0", NULL, &clk_cpu),
- CLKDEV_INIT("sa11x0-pcmcia.1", NULL, &clk_cpu),
- /* sa1111 names devices using internal offsets, PCMCIA is at 0x1800 */
- CLKDEV_INIT("1800", NULL, &clk_cpu),
- CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
-};
+ clk_hw_register_clkdev(hw, NULL, "sa1111.0");
-int __init sa11xx_clk_init(void)
-{
- clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
return 0;
}
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index e93e3a1d60d5..d685f03f51f3 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -83,57 +83,6 @@ static struct resource h3xxx_flash_resource =
/*
* H3xxx uart support
*/
-static struct gpio h3xxx_uart_gpio[] = {
- { H3XXX_GPIO_COM_DCD, GPIOF_IN, "COM DCD" },
- { H3XXX_GPIO_COM_CTS, GPIOF_IN, "COM CTS" },
- { H3XXX_GPIO_COM_RTS, GPIOF_OUT_INIT_LOW, "COM RTS" },
-};
-
-static bool h3xxx_uart_request_gpios(void)
-{
- static bool h3xxx_uart_gpio_ok;
- int rc;
-
- if (h3xxx_uart_gpio_ok)
- return true;
-
- rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio));
- if (rc)
- pr_err("h3xxx_uart_request_gpios: error %d\n", rc);
- else
- h3xxx_uart_gpio_ok = true;
-
- return h3xxx_uart_gpio_ok;
-}
-
-static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
-{
- if (port->mapbase == _Ser3UTCR0) {
- if (!h3xxx_uart_request_gpios())
- return;
- gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
- }
-}
-
-static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
-{
- u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
- if (port->mapbase == _Ser3UTCR0) {
- if (!h3xxx_uart_request_gpios())
- return ret;
- /*
- * DCD and CTS bits are inverted in GPLR by RS232 transceiver
- */
- if (gpio_get_value(H3XXX_GPIO_COM_DCD))
- ret &= ~TIOCM_CD;
- if (gpio_get_value(H3XXX_GPIO_COM_CTS))
- ret &= ~TIOCM_CTS;
- }
-
- return ret;
-}
-
static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
if (port->mapbase == _Ser3UTCR0) {
@@ -166,12 +115,20 @@ static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
}
static struct sa1100_port_fns h3xxx_port_fns __initdata = {
- .set_mctrl = h3xxx_uart_set_mctrl,
- .get_mctrl = h3xxx_uart_get_mctrl,
.pm = h3xxx_uart_pm,
.set_wake = h3xxx_uart_set_wake,
};
+static struct gpiod_lookup_table h3xxx_uart3_gpio_table = {
+ .dev_id = "sa11x0-uart.3",
+ .table = {
+ GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_DCD, "dcd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_CTS, "cts", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_RTS, "rts", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
/*
* EGPIO
*/
@@ -279,6 +236,7 @@ static struct gpiod_lookup_table h3xxx_pcmcia_gpio_table = {
void __init h3xxx_mach_init(void)
{
gpiod_add_lookup_table(&h3xxx_pcmcia_gpio_table);
+ gpiod_add_lookup_table(&h3xxx_uart3_gpio_table);
sa1100_register_uart_fns(&h3xxx_port_fns);
sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 4f4c1bb890e0..6d37d263e0d2 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -45,8 +45,6 @@
/* init funcs */
static void __init hackkit_map_io(void);
-static u_int hackkit_get_mctrl(struct uart_port *port);
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl);
static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
/**********************************************************************
@@ -67,8 +65,6 @@ static struct map_desc hackkit_io_desc[] __initdata = {
};
static struct sa1100_port_fns hackkit_port_fns __initdata = {
- .set_mctrl = hackkit_set_mctrl,
- .get_mctrl = hackkit_get_mctrl,
.pm = hackkit_uart_pm,
};
@@ -101,50 +97,6 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
/* TODO: switch on/off uart in powersave mode */
}
-/*
- * Note! this can be called from IRQ context.
- * FIXME: No modem ctrl lines yet.
- */
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-#if 0
- if (port->mapbase == _Ser1UTCR0) {
- u_int set = 0, clear = 0;
-
- if (mctrl & TIOCM_RTS)
- set |= PT_CTRL2_RS1_RTS;
- else
- clear |= PT_CTRL2_RS1_RTS;
-
- if (mctrl & TIOCM_DTR)
- set |= PT_CTRL2_RS1_DTR;
- else
- clear |= PT_CTRL2_RS1_DTR;
-
- PTCTRL2_clear(clear);
- PTCTRL2_set(set);
- }
-#endif
-}
-
-static u_int hackkit_get_mctrl(struct uart_port *port)
-{
- u_int ret = 0;
-#if 0
- u_int irqsr = PT_IRQSR;
-
- /* need 2 reads to read current value */
- irqsr = PT_IRQSR;
-
- /* TODO: check IRQ source register for modem/com
- status lines and set them correctly. */
-#endif
-
- ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
- return ret;
-}
-
static struct mtd_partition hackkit_partitions[] = {
{
.name = "BLOB",
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index a671e4c994cf..6876bc1e33b4 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -11,7 +11,6 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/platform_data/sa11x0-serial.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/serial_core.h>
@@ -49,23 +48,8 @@
#define IRR_SA1111 (1 << 2)
#define NCR_NGPIO 7
-
-#define MDM_CTL0_RTS1 (1 << 0)
-#define MDM_CTL0_DTR1 (1 << 1)
-#define MDM_CTL0_RTS2 (1 << 2)
-#define MDM_CTL0_DTR2 (1 << 3)
#define MDM_CTL0_NGPIO 4
-
-#define MDM_CTL1_CTS1 (1 << 0)
-#define MDM_CTL1_DSR1 (1 << 1)
-#define MDM_CTL1_DCD1 (1 << 2)
-#define MDM_CTL1_CTS2 (1 << 3)
-#define MDM_CTL1_DSR2 (1 << 4)
-#define MDM_CTL1_DCD2 (1 << 5)
#define MDM_CTL1_NGPIO 6
-
-#define AUD_SEL_1341 (1 << 0)
-#define AUD_MUTE_1341 (1 << 1)
#define AUD_NGPIO 2
extern void sa1110_mb_disable(void);
@@ -97,6 +81,30 @@ struct neponset_drvdata {
struct gpio_chip *gpio[4];
};
+static struct gpiod_lookup_table neponset_uart1_gpio_table = {
+ .dev_id = "sa11x0-uart.1",
+ .table = {
+ GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table neponset_uart3_gpio_table = {
+ .dev_id = "sa11x0-uart.3",
+ .table = {
+ GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct gpiod_lookup_table neponset_pcmcia_table = {
.dev_id = "1800",
.table = {
@@ -124,69 +132,6 @@ void neponset_ncr_frob(unsigned int mask, unsigned int val)
}
EXPORT_SYMBOL(neponset_ncr_frob);
-static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
-{
- struct neponset_drvdata *n = nep;
- unsigned long mask, val = 0;
-
- if (!n)
- return;
-
- if (port->mapbase == _Ser1UTCR0) {
- mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2;
-
- if (!(mctrl & TIOCM_RTS))
- val |= MDM_CTL0_RTS2;
-
- if (!(mctrl & TIOCM_DTR))
- val |= MDM_CTL0_DTR2;
- } else if (port->mapbase == _Ser3UTCR0) {
- mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1;
-
- if (!(mctrl & TIOCM_RTS))
- val |= MDM_CTL0_RTS1;
-
- if (!(mctrl & TIOCM_DTR))
- val |= MDM_CTL0_DTR1;
- }
-
- n->gpio[1]->set_multiple(n->gpio[1], &mask, &val);
-}
-
-static u_int neponset_get_mctrl(struct uart_port *port)
-{
- void __iomem *base = nep->base;
- u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
- u_int mdm_ctl1;
-
- if (!base)
- return ret;
-
- mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
- if (port->mapbase == _Ser1UTCR0) {
- if (mdm_ctl1 & MDM_CTL1_DCD2)
- ret &= ~TIOCM_CD;
- if (mdm_ctl1 & MDM_CTL1_CTS2)
- ret &= ~TIOCM_CTS;
- if (mdm_ctl1 & MDM_CTL1_DSR2)
- ret &= ~TIOCM_DSR;
- } else if (port->mapbase == _Ser3UTCR0) {
- if (mdm_ctl1 & MDM_CTL1_DCD1)
- ret &= ~TIOCM_CD;
- if (mdm_ctl1 & MDM_CTL1_CTS1)
- ret &= ~TIOCM_CTS;
- if (mdm_ctl1 & MDM_CTL1_DSR1)
- ret &= ~TIOCM_DSR;
- }
-
- return ret;
-}
-
-static struct sa1100_port_fns neponset_port_fns = {
- .set_mctrl = neponset_set_mctrl,
- .get_mctrl = neponset_get_mctrl,
-};
-
/*
* Install handler for Neponset IRQ. Note that we have to loop here
* since the ETHERNET and USAR IRQs are level based, and we need to
@@ -388,6 +333,8 @@ static int neponset_probe(struct platform_device *dev)
d->base + AUD_CTL, AUD_NGPIO, false,
neponset_aud_names);
+ gpiod_add_lookup_table(&neponset_uart1_gpio_table);
+ gpiod_add_lookup_table(&neponset_uart3_gpio_table);
gpiod_add_lookup_table(&neponset_pcmcia_table);
/*
@@ -402,8 +349,6 @@ static int neponset_probe(struct platform_device *dev)
d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
nep = d;
- sa1100_register_uart_fns(&neponset_port_fns);
-
/* Ensure that the memory bus request/grant signals are setup */
sa1110_mb_disable();
@@ -442,6 +387,8 @@ static int neponset_remove(struct platform_device *dev)
platform_device_unregister(d->smc91x);
gpiod_remove_lookup_table(&neponset_pcmcia_table);
+ gpiod_remove_lookup_table(&neponset_uart3_gpio_table);
+ gpiod_remove_lookup_table(&neponset_uart1_gpio_table);
irq_set_chained_handler(irq, NULL);
irq_free_descs(d->irq_base, NEP_IRQ_NR);
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index eea60b20c6b4..9e4bc1865f84 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -17,6 +17,7 @@
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
+#include <linux/psci.h>
#include <asm/mach/arch.h>
#include <asm/secure_cntvoff.h>
#include "common.h"
@@ -60,9 +61,24 @@ static unsigned int __init get_extal_freq(void)
void __init rcar_gen2_timer_init(void)
{
+ bool need_update = true;
void __iomem *base;
u32 freq;
+ /*
+ * If PSCI is available then most likely we are running on PSCI-enabled
+ * U-Boot which, we assume, has already taken care of resetting CNTVOFF
+ * and updating counter module before switching to non-secure mode
+ * and we don't need to.
+ */
+#ifdef CONFIG_ARM_PSCI_FW
+ if (psci_ops.cpu_on)
+ need_update = false;
+#endif
+
+ if (need_update == false)
+ goto skip_update;
+
secure_cntvoff_init();
if (of_machine_is_compatible("renesas,r8a7745") ||
@@ -102,6 +118,7 @@ void __init rcar_gen2_timer_init(void)
iounmap(base);
+skip_update:
of_clk_init(NULL);
timer_probe();
}
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 05d6b5aada80..57699bd8f107 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig ARCH_STM32
- bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
+ bool "STMicroelectronics STM32 family"
+ depends on ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
select ARM_GIC if ARCH_MULTI_V7
diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile
index da6c633d3cc0..97cd04508fa1 100644
--- a/arch/arm/mach-tango/Makefile
+++ b/arch/arm/mach-tango/Makefile
@@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
-
obj-y += setup.o smc.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_SUSPEND) += pm.o
diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S
index 361a8dc89804..b1752aaa72bc 100644
--- a/arch/arm/mach-tango/smc.S
+++ b/arch/arm/mach-tango/smc.S
@@ -1,6 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/linkage.h>
+ .arch armv7-a
+ .arch_extension sec
ENTRY(tango_smc)
push {lr}
mov ip, r1
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 0b763239c0f8..c00ea4f77af6 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -16,8 +16,6 @@
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/mmci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -34,14 +32,12 @@
*/
#define VERSATILE_SYS_PCICTL_OFFSET 0x44
#define VERSATILE_SYS_MCI_OFFSET 0x48
-#define VERSATILE_SYS_CLCD_OFFSET 0x50
/*
* VERSATILE peripheral addresses
*/
#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */
#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */
-#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */
#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */
#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000)
@@ -84,158 +80,6 @@ static struct mmci_platform_data mmc1_plat_data = {
};
/*
- * CLCD support.
- */
-#define SYS_CLCD_MODE_MASK (3 << 0)
-#define SYS_CLCD_MODE_888 (0 << 0)
-#define SYS_CLCD_MODE_5551 (1 << 0)
-#define SYS_CLCD_MODE_565_RLSB (2 << 0)
-#define SYS_CLCD_MODE_565_BLSB (3 << 0)
-#define SYS_CLCD_NLCDIOON (1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
-#define SYS_CLCD_ID_MASK (0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
-#define SYS_CLCD_ID_VGA (0x1f << 8)
-
-static bool is_sanyo_2_5_lcd;
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void versatile_clcd_disable(struct clcd_fb *fb)
-{
- void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
- u32 val;
-
- val = readl(sys_clcd);
- val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
- writel(val, sys_clcd);
-
- /*
- * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
- */
- if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
- unsigned long ctrl;
-
- ctrl = readl(versatile_ib2_ctrl);
- ctrl &= ~0x01;
- writel(ctrl, versatile_ib2_ctrl);
- }
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void versatile_clcd_enable(struct clcd_fb *fb)
-{
- struct fb_var_screeninfo *var = &fb->fb.var;
- void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
- u32 val;
-
- val = readl(sys_clcd);
- val &= ~SYS_CLCD_MODE_MASK;
-
- switch (var->green.length) {
- case 5:
- val |= SYS_CLCD_MODE_5551;
- break;
- case 6:
- if (var->red.offset == 0)
- val |= SYS_CLCD_MODE_565_RLSB;
- else
- val |= SYS_CLCD_MODE_565_BLSB;
- break;
- case 8:
- val |= SYS_CLCD_MODE_888;
- break;
- }
-
- /*
- * Set the MUX
- */
- writel(val, sys_clcd);
-
- /*
- * And now enable the PSUs
- */
- val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
- writel(val, sys_clcd);
-
- /*
- * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
- */
- if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
- unsigned long ctrl;
-
- ctrl = readl(versatile_ib2_ctrl);
- ctrl |= 0x01;
- writel(ctrl, versatile_ib2_ctrl);
- }
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure. Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int versatile_clcd_setup(struct clcd_fb *fb)
-{
- void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
- const char *panel_name;
- u32 val;
-
- is_sanyo_2_5_lcd = false;
-
- val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
- if (val == SYS_CLCD_ID_SANYO_3_8)
- panel_name = "Sanyo TM38QV67A02A";
- else if (val == SYS_CLCD_ID_SANYO_2_5) {
- panel_name = "Sanyo QVGA Portrait";
- is_sanyo_2_5_lcd = true;
- } else if (val == SYS_CLCD_ID_EPSON_2_2)
- panel_name = "Epson L2F50113T00";
- else if (val == SYS_CLCD_ID_VGA)
- panel_name = "VGA";
- else {
- printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
- val);
- panel_name = "VGA";
- }
-
- fb->panel = versatile_clcd_get_panel(panel_name);
- if (!fb->panel)
- return -EINVAL;
-
- return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
- clcdfb_decode(fb, regs);
-
- /* Always clear BGR for RGB565: we do the routing externally */
- if (fb->fb.var.green.length == 6)
- regs->cntl &= ~CNTL_BGR;
-}
-
-static struct clcd_board clcd_plat_data = {
- .name = "Versatile",
- .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
- .check = clcdfb_check,
- .decode = versatile_clcd_decode,
- .disable = versatile_clcd_disable,
- .enable = versatile_clcd_enable,
- .setup = versatile_clcd_setup,
- .mmap = versatile_clcd_mmap_dma,
- .remove = versatile_clcd_remove_dma,
-};
-
-/*
* Lookup table for attaching a specific name and platform_data pointer to
* devices as they get created by of_platform_populate(). Ideally this table
* would not exist, but the current clock implementation depends on some devices
@@ -244,7 +88,6 @@ static struct clcd_board clcd_plat_data = {
struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data),
- OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
{}
};
@@ -299,12 +142,12 @@ static void __init versatile_dt_pci_init(void)
* driver had it so we will keep it.
*/
writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
- return;
+ goto out_put_node;
}
newprop = kzalloc(sizeof(*newprop), GFP_KERNEL);
if (!newprop)
- return;
+ goto out_put_node;
newprop->name = kstrdup("status", GFP_KERNEL);
newprop->value = kstrdup("disabled", GFP_KERNEL);
@@ -312,6 +155,9 @@ static void __init versatile_dt_pci_init(void)
of_update_property(np, newprop);
pr_info("Not plugged into PCI backplane!\n");
+
+out_put_node:
+ of_node_put(np);
}
static void __init versatile_dt_init(void)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index d07fc063c930..4778c775de1b 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -66,8 +66,11 @@ config ARCH_BITMAIN
config ARCH_BRCMSTB
bool "Broadcom Set-Top-Box SoCs"
+ select ARCH_HAS_RESET_CONTROLLER
+ select BCM7038_L1_IRQ
select BRCMSTB_L2_IRQ
select GENERIC_IRQ_CHIP
+ select PINCTRL
help
This enables support for Broadcom's ARMv8 Set Top Box SoCs
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 68bfca6f20dd..2bbf49e5d441 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -57,14 +57,16 @@ config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select PM
select PM_GENERIC_DOMAINS
- select SYS_SUPPORTS_SH_MTU2
select RENESAS_OSTM
+ select RENESAS_RZA1_IRQC
+ select SYS_SUPPORTS_SH_MTU2
config ARCH_R7S9210
bool "RZ/A2 (R7S9210)"
select PM
select PM_GENERIC_DOMAINS
select RENESAS_OSTM
+ select RENESAS_RZA1_IRQC
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
index fc5802ccb1c0..bb77c220b6f8 100644
--- a/drivers/soc/ti/pm33xx.c
+++ b/drivers/soc/ti/pm33xx.c
@@ -178,6 +178,7 @@ static int am33xx_pm_suspend(suspend_state_t suspend_state)
suspend_wfi_flags);
suspend_wfi_flags &= ~WFI_FLAG_RTC_ONLY;
+ dev_info(pm33xx_dev, "Entering RTC Only mode with DDR in self-refresh\n");
if (!ret) {
clk_restore_context();
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 04c23951b831..fd385c8c53a5 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -497,6 +497,7 @@ config SERIAL_SA1100
bool "SA1100 serial port support"
depends on ARCH_SA1100
select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO if GPIOLIB
help
If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
can enable its onboard serial port by enabling this option.
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index a399772be3fc..8e618129e65c 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -28,6 +28,8 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
+#include "serial_mctrl_gpio.h"
+
/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_SA1100_MAJOR 204
#define MINOR_START 5
@@ -77,6 +79,7 @@ struct sa1100_port {
struct uart_port port;
struct timer_list timer;
unsigned int old_status;
+ struct mctrl_gpios *gpios;
};
/*
@@ -174,6 +177,8 @@ static void sa1100_enable_ms(struct uart_port *port)
container_of(port, struct sa1100_port, port);
mod_timer(&sport->timer, jiffies);
+
+ mctrl_gpio_enable_ms(sport->gpios);
}
static void
@@ -322,11 +327,21 @@ static unsigned int sa1100_tx_empty(struct uart_port *port)
static unsigned int sa1100_get_mctrl(struct uart_port *port)
{
- return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+ struct sa1100_port *sport =
+ container_of(port, struct sa1100_port, port);
+ int ret = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+ mctrl_gpio_get(sport->gpios, &ret);
+
+ return ret;
}
static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
+ struct sa1100_port *sport =
+ container_of(port, struct sa1100_port, port);
+
+ mctrl_gpio_set(sport->gpios, mctrl);
}
/*
@@ -842,6 +857,31 @@ static int sa1100_serial_resume(struct platform_device *dev)
return 0;
}
+static int sa1100_serial_add_one_port(struct sa1100_port *sport, struct platform_device *dev)
+{
+ sport->port.dev = &dev->dev;
+
+ // mctrl_gpio_init() requires that the GPIO driver supports interrupts,
+ // but we need to support GPIO drivers for hardware that has no such
+ // interrupts. Use mctrl_gpio_init_noauto() instead.
+ sport->gpios = mctrl_gpio_init_noauto(sport->port.dev, 0);
+ if (IS_ERR(sport->gpios)) {
+ int err = PTR_ERR(sport->gpios);
+
+ dev_err(sport->port.dev, "failed to get mctrl gpios: %d\n",
+ err);
+
+ if (err == -EPROBE_DEFER)
+ return err;
+
+ sport->gpios = NULL;
+ }
+
+ platform_set_drvdata(dev, sport);
+
+ return uart_add_one_port(&sa1100_reg, &sport->port);
+}
+
static int sa1100_serial_probe(struct platform_device *dev)
{
struct resource *res = dev->resource;
@@ -856,9 +896,7 @@ static int sa1100_serial_probe(struct platform_device *dev)
if (sa1100_ports[i].port.mapbase != res->start)
continue;
- sa1100_ports[i].port.dev = &dev->dev;
- uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port);
- platform_set_drvdata(dev, &sa1100_ports[i]);
+ sa1100_serial_add_one_port(&sa1100_ports[i], dev);
break;
}
}
diff --git a/include/linux/platform_data/video-clcd-versatile.h b/include/linux/platform_data/video-clcd-versatile.h
deleted file mode 100644
index 305ebaec3afd..000000000000
--- a/include/linux/platform_data/video-clcd-versatile.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef PLAT_CLCD_H
-#define PLAT_CLCD_H
-
-#ifdef CONFIG_PLAT_VERSATILE_CLCD
-struct clcd_panel *versatile_clcd_get_panel(const char *);
-int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long);
-int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *);
-void versatile_clcd_remove_dma(struct clcd_fb *);
-#else
-static inline struct clcd_panel *versatile_clcd_get_panel(const char *s)
-{
- return NULL;
-}
-static inline int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize)
-{
- return -ENODEV;
-}
-static inline int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vm)
-{
- return -ENODEV;
-}
-static inline void versatile_clcd_remove_dma(struct clcd_fb *fb)
-{
-}
-#endif
-
-#endif