diff options
| -rw-r--r-- | drivers/pci/controller/cadence/pci-j721e.c | 26 |
1 files changed, 12 insertions, 14 deletions
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index c9f3103d68e1..dc10d51c1352 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -583,15 +583,14 @@ static int j721e_pcie_probe(struct platform_device *pdev) pcie->refclk = clk; /* - * The "Power Sequencing and Reset Signal Timings" table of the - * PCI Express Card Electromechanical Specification, Revision - * 5.1, Section 2.9.2, Symbol "T_PERST-CLK", indicates PERST# - * should be deasserted after minimum of 100us once REFCLK is - * stable. The REFCLK to the connector in RC mode is selected - * while enabling the PHY. So deassert PERST# after 100 us. + * Section 2.2 of the PCI Express Card Electromechanical + * Specification (Revision 5.1) mandates that the deassertion + * of the PERST# signal should be delayed by 100 ms (TPVPERL). + * This shall ensure that the power and the reference clock + * are stable. */ if (gpiod) { - fsleep(PCIE_T_PERST_CLK_US); + msleep(PCIE_T_PVPERL_MS); gpiod_set_value_cansleep(gpiod, 1); } @@ -682,15 +681,14 @@ static int j721e_pcie_resume_noirq(struct device *dev) return ret; /* - * The "Power Sequencing and Reset Signal Timings" table of the - * PCI Express Card Electromechanical Specification, Revision - * 5.1, Section 2.9.2, Symbol "T_PERST-CLK", indicates PERST# - * should be deasserted after minimum of 100us once REFCLK is - * stable. The REFCLK to the connector in RC mode is selected - * while enabling the PHY. So deassert PERST# after 100 us. + * Section 2.2 of the PCI Express Card Electromechanical + * Specification (Revision 5.1) mandates that the deassertion + * of the PERST# signal should be delayed by 100 ms (TPVPERL). + * This shall ensure that the power and the reference clock + * are stable. */ if (pcie->reset_gpio) { - fsleep(PCIE_T_PERST_CLK_US); + msleep(PCIE_T_PVPERL_MS); gpiod_set_value_cansleep(pcie->reset_gpio, 1); } |