diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml | 75 | ||||
| -rw-r--r-- | drivers/spi/spi-meson-spicc.c | 39 |
2 files changed, 85 insertions, 29 deletions
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 0c10f7678178..53eb6562b979 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -10,9 +10,6 @@ title: Amlogic Meson SPI Communication Controller maintainers: - Neil Armstrong <neil.armstrong@linaro.org> -allOf: - - $ref: "spi-controller.yaml#" - description: | The Meson SPICC is a generic SPI controller for general purpose Full-Duplex communications with dedicated 16 words RX/TX PIO FIFOs. @@ -43,31 +40,53 @@ properties: minItems: 1 maxItems: 2 -if: - properties: - compatible: - contains: - enum: - - amlogic,meson-g12a-spicc - -then: - properties: - clocks: - minItems: 2 - - clock-names: - items: - - const: core - - const: pclk - -else: - properties: - clocks: - maxItems: 1 - - clock-names: - items: - - const: core +allOf: + - $ref: "spi-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-spicc + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: core + - const: pclk + + else: + properties: + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-gx-spicc + + then: + properties: + pinctrl-0: true + pinctrl-1: true + pinctrl-2: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: idle-high + - const: idle-low required: - compatible diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index bad201510a99..ffea38e2339c 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -21,6 +21,7 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/reset.h> +#include <linux/pinctrl/consumer.h> /* * The Meson SPICC controller could support DMA based transfers, but is not @@ -167,6 +168,9 @@ struct meson_spicc_device { unsigned long tx_remain; unsigned long rx_remain; unsigned long xfer_remain; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_idle_high; + struct pinctrl_state *pins_idle_low; }; #define pow2_clk_to_spicc(_div) container_of(_div, struct meson_spicc_device, pow2_div) @@ -175,8 +179,22 @@ static void meson_spicc_oen_enable(struct meson_spicc_device *spicc) { u32 conf; - if (!spicc->data->has_oen) + if (!spicc->data->has_oen) { + /* Try to get pinctrl states for idle high/low */ + spicc->pins_idle_high = pinctrl_lookup_state(spicc->pinctrl, + "idle-high"); + if (IS_ERR(spicc->pins_idle_high)) { + dev_warn(&spicc->pdev->dev, "can't get idle-high pinctrl\n"); + spicc->pins_idle_high = NULL; + } + spicc->pins_idle_low = pinctrl_lookup_state(spicc->pinctrl, + "idle-low"); + if (IS_ERR(spicc->pins_idle_low)) { + dev_warn(&spicc->pdev->dev, "can't get idle-low pinctrl\n"); + spicc->pins_idle_low = NULL; + } return; + } conf = readl_relaxed(spicc->base + SPICC_ENH_CTL0) | SPICC_ENH_MOSI_OEN | SPICC_ENH_CLK_OEN | SPICC_ENH_CS_OEN; @@ -441,6 +459,16 @@ static int meson_spicc_prepare_message(struct spi_master *master, else conf &= ~SPICC_POL; + if (!spicc->data->has_oen) { + if (spi->mode & SPI_CPOL) { + if (spicc->pins_idle_high) + pinctrl_select_state(spicc->pinctrl, spicc->pins_idle_high); + } else { + if (spicc->pins_idle_low) + pinctrl_select_state(spicc->pinctrl, spicc->pins_idle_low); + } + } + if (spi->mode & SPI_CPHA) conf |= SPICC_PHA; else @@ -487,6 +515,9 @@ static int meson_spicc_unprepare_transfer(struct spi_master *master) /* Set default configuration, keeping datarate field */ writel_relaxed(conf, spicc->base + SPICC_CONREG); + if (!spicc->data->has_oen) + pinctrl_select_default_state(&spicc->pdev->dev); + return 0; } @@ -798,6 +829,12 @@ static int meson_spicc_probe(struct platform_device *pdev) goto out_core_clk; } + spicc->pinctrl = devm_pinctrl_get(&pdev->dev); + if (IS_ERR(spicc->pinctrl)) { + ret = PTR_ERR(spicc->pinctrl); + goto out_clk; + } + device_reset_optional(&pdev->dev); master->num_chipselect = 4; |