diff options
39 files changed, 559 insertions, 72 deletions
diff --git a/Documentation/sound/codecs/cs35l56.rst b/Documentation/sound/codecs/cs35l56.rst new file mode 100644 index 000000000000..98c6f6c74394 --- /dev/null +++ b/Documentation/sound/codecs/cs35l56.rst @@ -0,0 +1,292 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +===================================================================== +Audio drivers for Cirrus Logic CS35L54/56/57 Boosted Smart Amplifiers +===================================================================== +:Copyright: 2025 Cirrus Logic, Inc. and + Cirrus Logic International Semiconductor Ltd. + +Contact: patches@opensource.cirrus.com + +Summary +======= + +The high-level summary of this document is: + +**If you have a laptop that uses CS35L54/56/57 amplifiers but audio is not +working, DO NOT ATTEMPT TO USE FIRMWARE AND SETTINGS FROM ANOTHER LAPTOP, +EVEN IF THAT LAPTOP SEEMS SIMILAR.** + +The CS35L54/56/57 amplifiers must be correctly configured for the power +supply voltage, speaker impedance, maximum speaker voltage/current, and +other external hardware connections. + +The amplifiers feature advanced boost technology that increases the voltage +used to drive the speakers, while proprietary speaker protection algorithms +allow these boosted amplifiers to push the limits of the speakers without +causing damage. These **must** be configured correctly. + +Supported Cirrus Logic amplifiers +--------------------------------- + +The cs35l56 drivers support: + +* CS35L54 +* CS35L56 +* CS35L57 + +There are two drivers in the kernel + +*For systems using SoundWire*: sound/soc/codecs/cs35l56.c and associated files + +*For systems using HDA*: sound/pci/hda/cs35l56_hda.c + +Firmware +======== + +The amplifier is controlled and managed by firmware running on the internal +DSP. Firmware files are essential to enable the full capabilities of the +amplifier. + +Firmware is distributed in the linux-firmware repository: +https://gitlab.com/kernel-firmware/linux-firmware.git + +On most SoundWire systems the amplifier has a default minimum capability to +produce audio. However this will be + +* at low volume, to protect the speakers, since the speaker specifications + and power supply voltages are unknown. +* a mono mix of left and right channels. + +On some SoundWire systems that have both CS42L43 and CS35L56/57 the CS35L56/57 +receive their audio from the CS42L43 instead of directly from the host +SoundWire interface. These systems can be identified by the CS42L43 showing +in dmesg as a SoundWire device, but the CS35L56/57 as SPI. On these systems +the firmware is *mandatory* to enable receiving the audio from the CS42L43. + +On HDA systems the firmware is *mandatory* to enable HDA bridge mode. There +will not be any audio from the amplifiers without firmware. + +Cirrus Logic firmware files +--------------------------- + +Each amplifier requires two firmware files. One file has a .wmfw suffix, the +other has a .bin suffix. + +The firmware is customized by the OEM to match the hardware of each laptop, +and the firmware is specific to that laptop. Because of this, there are many +firmware files in linux-firmware for these amplifiers. Firmware files are +**not interchangeable between laptops**. + +Cirrus Logic submits files for known laptops to the upstream linux-firmware +repository. Providing Cirrus Logic is aware of a particular laptop and has +permission from the manufacturer to publish the firmware, it will be pushed +to linux-firmware. You may need to upgrade to a newer release of +linux-firmware to obtain the firmware for your laptop. + +**Important:** the Makefile for linux-firmware creates symlinks that are listed +in the WHENCE file. These symlinks are required for the CS35L56 driver to be +able to load the firmware. + +How do I know which firmware file I should have? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +All firmware file names are qualified with a unique "system ID". On normal +x86 PCs with PCI audio this is the Vendor Subsystem ID (SSID) of the host +PCI audio interface. + +The SSID can be viewed using the lspci tool:: + + lspci -v -nn | grep -A2 -i audio + 0000:00:1f.3 Audio device [0403]: Intel Corporation Meteor Lake-P HD Audio Controller [8086:7e28] + Subsystem: Dell Meteor Lake-P HD Audio Controller [1028:0c63] + +In this example the SSID is 10280c63. + +The format of the firmware file names is: + + cs35lxx-b0-dsp1-misc-SSID[-spkidX]-ampN + +Where: + + * cs35lxx-b0 is the amplifier model and silicon revision. This information + is logged by the driver during initialization. + * SSID is the 8-digit hexadecimal SSID value. + * ampN is the amplifier number (for example amp1). This is the same as + the prefix on the ALSA control names except that it is always lower-case + in the file name. + * spkidX is an optional part, used for laptops that have firmware + configurations for different makes and models of internal speakers. + +Sound Open Firmware and ALSA topology files +------------------------------------------- + +All SoundWire systems will require a Sound Open Firmware (SOF) for the +host CPU audio DSP, together with an ALSA topology file (.tplg). + +The SOF firmware will usually be provided by the manufacturer of the host +CPU (i.e. Intel or AMD). The .tplg file is normally part of the SOF firmware +release. + +SOF binary builds are available from: https://github.com/thesofproject/sof-bin/releases + +The main SOF source is here: https://github.com/thesofproject + +ALSA-ucm configurations +----------------------- +Typically an appropriate ALSA-ucm configuration file is needed for +use-case managers and audio servers such as PipeWire. + +Configuration files are available from the alsa-ucm-conf repository: +https://git.alsa-project.org/?p=alsa-ucm-conf.git + +Kernel log messages +=================== + +SoundWire +--------- +A successful initialization will look like this (this will be repeated for +each amplifier):: + + [ 7.568374] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_P not found, using dummy regulator + [ 7.605208] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_IO not found, using dummy regulator + [ 7.605313] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_A not found, using dummy regulator + [ 7.939279] cs35l56 sdw:0:0:01fa:3556:01:0: Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0) + [ 7.947844] cs35l56 sdw:0:0:01fa:3556:01:0: Slave 4 state check1: UNATTACHED, status was 1 + [ 8.740280] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_B not found, using dummy regulator + [ 8.740552] cs35l56 sdw:0:0:01fa:3556:01:0: supply VDD_AMP not found, using dummy regulator + [ 9.242164] cs35l56 sdw:0:0:01fa:3556:01:0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw: format 3 timestamp 0x66b2b872 + [ 9.242173] cs35l56 sdw:0:0:01fa:3556:01:0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw: Tue 05 Dec 2023 21:37:21 GMT Standard Time + [ 9.991709] cs35l56 sdw:0:0:01fa:3556:01:0: DSP1: Firmware: 1a00d6 vendor: 0x2 v3.11.23, 41 algorithms + [10.039098] cs35l56 sdw:0:0:01fa:3556:01:0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx-amp1.bin: v3.11.23 + [10.879235] cs35l56 sdw:0:0:01fa:3556:01:0: Slave 4 state check1: UNATTACHED, status was 1 + [11.401536] cs35l56 sdw:0:0:01fa:3556:01:0: Calibration applied + +HDA +--- +A successful initialization will look like this (this will be repeated for +each amplifier):: + + [ 6.306475] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0) + [ 6.613892] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP system name: 'xxxxxxxx', amp name: 'AMP1' + [ 8.266660] snd_hda_codec_cs8409 ehdaudio0D0: bound i2c-CSC3556:00-cs35l56-hda.0 (ops cs35l56_hda_comp_ops [snd_hda_scodec_cs35l56]) + [ 8.287525] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw: format 3 timestamp 0x66b2b872 + [ 8.287528] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw: Tue 05 Dec 2023 21:37:21 GMT Standard Time + [ 9.984335] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP1: Firmware: 1a00d6 vendor: 0x2 v3.11.23, 41 algorithms + [10.085797] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx-amp1.bin: v3.11.23 + [10.655237] cs35l56-hda i2c-CSC3556:00-cs35l56-hda.0: Calibration applied + +Important messages +~~~~~~~~~~~~~~~~~~ +Cirrus Logic CS35L56 Rev B0 OTP3 fw:3.4.4 (patched=0) + Shows that the driver has been able to read device ID registers from the + amplifier. + + * The actual amplifier type and silicon revision (CS35L56 B0 in this + example) is shown, as read from the amplifier identification registers. + * (patched=0) is normal, and indicates that the amplifier has been hard + reset and is running default ROM firmware. + * (patched=1) means that something has previously downloaded firmware + to the amplifier and the driver does not have control of the RESET + signal to be able to replace this preloaded firmware. This is normal + for systems where the BIOS downloads firmware to the amplifiers + before OS boot. + This status can also be seen if the cs35l56 kernel module is unloaded + and reloaded on a system where the driver does not have control of + RESET. SoundWire systems typically do not give the driver control of + RESET and only a BIOS (re)boot can reset the amplifiers. + +DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx.wmfw + Shows that a .wmfw firmware file was found and downloaded. + +DSP1: cirrus/cs35l56-b0-dsp1-misc-xxxxxxxx-amp1.bin + Shows that a .bin firmware file was found and downloaded. + +Calibration applied + Factory calibration data in EFI was written to the amplifier. + +Error messages +============== +This section explains some of the error messages that the driver can log. + +Algorithm coefficient version %d.%d.%d but expected %d.%d.%d + The version of the .bin file content does not match the loaded firmware. + Caused by mismatched .wmfw and .bin file, or .bin file was found but + .wmfw was not. + +No %s for algorithm %x + The version of the .bin file content does not match the loaded firmware. + Caused by mismatched .wmfw and .bin file, or .bin file was found but + .wmfw was not. + +.bin file required but not found + HDA driver did not find a .bin file that matches this hardware. + +Calibration disabled due to missing firmware controls + Driver was not able to write EFI calibration data to firmware registers. + This typically means that either: + + * The driver did not find a suitable wmfw for this hardware, or + * The amplifier has already been patched with firmware by something + previously, and the driver does not have control of a hard RESET line + to be able to reset the amplifier and download the firmware files it + found. This situation is indicated by the device identification + string in the kernel log shows "(patched=1)" + +Failed to write calibration + Same meaning and cause as "Calibration disabled due to missing firmware + controls" + +Failed to read calibration data from EFI + Factory calibration data in EFI is missing, empty or corrupt. + This is most likely to be cause by accidentally deleting the file from + the EFI filesystem. + +No calibration for silicon ID + The factory calibration data in EFI does not match this hardware. + The most likely cause is that an amplifier has been replaced on the + motherboard without going through manufacturer calibration process to + generate calibration data for the new amplifier. + +Did not find any buses for CSCxxxx + Only on HDA systems. The HDA codec driver found an ACPI entry for + Cirrus Logic companion amps, but could not enumerate the ACPI entries for + the I2C/SPI buses. The most likely cause of this is that: + + * The relevant bus driver (I2C or SPI) is not part of the kernel. + * The HDA codec driver was built-in to the kernel but the I2C/SPI + bus driver is a module and so the HDA codec driver cannot call the + bus driver functions. + +init_completion timed out + The SoundWire bus controller (host end) did not enumerate the amplifier. + In other words, the ACPI says there is an amplifier but for some reason + it was not detected on the bus. + +No AF01 node + Indicates an error in ACPI. A SoundWire system should have a Device() + node named "AF01" but it was not found. + +Failed to get spk-id-gpios + ACPI says that the driver should request a GPIO but the driver was not + able to get that GPIO. The most likely cause is that the kernel does not + include the correct GPIO or PINCTRL driver for this system. + +Failed to read spk-id + ACPI says that the driver should request a GPIO but the driver was not + able to read that GPIO. + +Unexpected spk-id element count + AF01 contains more speaker ID GPIO entries than the driver supports + +Overtemp error + Amplifier overheat protection was triggered and the amplifier shut down + to protect itself. + +Amp short error + Amplifier detected a short-circuit on the speaker output pins and shut + down for protection. This would normally indicate a damaged speaker. + +Hibernate wake failed + The driver tried to wake the amplifier from its power-saving state but + did not see the expected responses from the amplifier. This can be caused + by using firmware that does not match the hardware. diff --git a/Documentation/sound/codecs/index.rst b/Documentation/sound/codecs/index.rst new file mode 100644 index 000000000000..2cb95d87bbef --- /dev/null +++ b/Documentation/sound/codecs/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Codec-Specific Information +========================== + +.. toctree:: + :maxdepth: 2 + + cs35l56 diff --git a/Documentation/sound/index.rst b/Documentation/sound/index.rst index c437f2a4bc85..51cd736f65b5 100644 --- a/Documentation/sound/index.rst +++ b/Documentation/sound/index.rst @@ -13,6 +13,7 @@ Sound Subsystem Documentation alsa-configuration hd-audio/index cards/index + codecs/index utimers .. only:: subproject and html diff --git a/MAINTAINERS b/MAINTAINERS index a87ddad78e26..0fa7c5728f1e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5465,6 +5465,7 @@ L: linux-sound@vger.kernel.org L: patches@opensource.cirrus.com S: Maintained F: Documentation/devicetree/bindings/sound/cirrus,cs* +F: Documentation/sound/codecs/cs* F: drivers/mfd/cs42l43* F: drivers/pinctrl/cirrus/pinctrl-cs42l43* F: drivers/spi/spi-cs42l43* @@ -21988,6 +21989,7 @@ W: https://github.com/thesofproject/linux/ F: sound/soc/sof/ SOUND - GENERIC SOUND CARD (Simple-Audio-Card, Audio-Graph-Card) +M: Mark Brown <broonie@kernel.org> M: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> S: Supported L: linux-sound@vger.kernel.org diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index c6d29f283001..62aa4d66a032 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -1080,7 +1080,8 @@ struct execmem_info __init *execmem_arch_setup(void) start = MODULES_VADDR + offset; - if (IS_ENABLED(CONFIG_ARCH_HAS_EXECMEM_ROX)) { + if (IS_ENABLED(CONFIG_ARCH_HAS_EXECMEM_ROX) && + cpu_feature_enabled(X86_FEATURE_PSE)) { pgprot = PAGE_KERNEL_ROX; flags = EXECMEM_KASAN_SHADOW | EXECMEM_ROX_CACHE; } else { diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 45df5eeabc5e..7903a4da40ac 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -1468,6 +1468,7 @@ static bool zram_meta_alloc(struct zram *zram, u64 disksize) zram->mem_pool = zs_create_pool(zram->disk->disk_name); if (!zram->mem_pool) { vfree(zram->table); + zram->table = NULL; return false; } diff --git a/drivers/pci/pcie/bwctrl.c b/drivers/pci/pcie/bwctrl.c index b59cacc740fa..0a5e7efbce2c 100644 --- a/drivers/pci/pcie/bwctrl.c +++ b/drivers/pci/pcie/bwctrl.c @@ -303,14 +303,17 @@ static int pcie_bwnotif_probe(struct pcie_device *srv) if (ret) return ret; - ret = devm_request_irq(&srv->device, srv->irq, pcie_bwnotif_irq, - IRQF_SHARED, "PCIe bwctrl", srv); - if (ret) - return ret; - scoped_guard(rwsem_write, &pcie_bwctrl_setspeed_rwsem) { scoped_guard(rwsem_write, &pcie_bwctrl_lbms_rwsem) { - port->link_bwctrl = no_free_ptr(data); + port->link_bwctrl = data; + + ret = request_irq(srv->irq, pcie_bwnotif_irq, + IRQF_SHARED, "PCIe bwctrl", srv); + if (ret) { + port->link_bwctrl = NULL; + return ret; + } + pcie_bwnotif_enable(srv); } } @@ -331,11 +334,15 @@ static void pcie_bwnotif_remove(struct pcie_device *srv) pcie_cooling_device_unregister(data->cdev); - pcie_bwnotif_disable(srv->port); + scoped_guard(rwsem_write, &pcie_bwctrl_setspeed_rwsem) { + scoped_guard(rwsem_write, &pcie_bwctrl_lbms_rwsem) { + pcie_bwnotif_disable(srv->port); + + free_irq(srv->irq, srv); - scoped_guard(rwsem_write, &pcie_bwctrl_setspeed_rwsem) - scoped_guard(rwsem_write, &pcie_bwctrl_lbms_rwsem) srv->port->link_bwctrl = NULL; + } + } } static int pcie_bwnotif_suspend(struct pcie_device *srv) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index adee6f60c966..0cc6a0f77b09 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -210,6 +210,9 @@ static int scsi_check_passthrough(struct scsi_cmnd *scmd, struct scsi_sense_hdr sshdr; enum sam_status status; + if (!scmd->result) + return 0; + if (!failures) return 0; diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index fde7de3b1e55..9b47f91c5b97 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -4104,7 +4104,7 @@ iscsi_if_rx(struct sk_buff *skb) } do { /* - * special case for GET_STATS: + * special case for GET_STATS, GET_CHAP and GET_HOST_STATS: * on success - sending reply and stats from * inside of if_recv_msg(), * on error - fall through. @@ -4113,6 +4113,8 @@ iscsi_if_rx(struct sk_buff *skb) break; if (ev->type == ISCSI_UEVENT_GET_CHAP && !err) break; + if (ev->type == ISCSI_UEVENT_GET_HOST_STATS && !err) + break; err = iscsi_if_send_reply(portid, nlh->nlmsg_type, ev, sizeof(*ev)); if (err == -EAGAIN && --retries < 0) { diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 1cccaf9c2b0d..3d0ac8bdb21f 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -797,6 +797,10 @@ static int get_canonical_dev_path(const char *dev_path, char *canonical) if (ret) goto out; resolved_path = d_path(&path, path_buf, PATH_MAX); + if (IS_ERR(resolved_path)) { + ret = PTR_ERR(resolved_path); + goto out; + } ret = strscpy(canonical, resolved_path, PATH_MAX); out: kfree(path_buf); diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c index 3d8a82cee63e..658bf199d424 100644 --- a/fs/proc/vmcore.c +++ b/fs/proc/vmcore.c @@ -404,6 +404,8 @@ static ssize_t __read_vmcore(struct iov_iter *iter, loff_t *fpos) if (!iov_iter_count(iter)) return acc; } + + cond_resched(); } return acc; diff --git a/include/linux/module.h b/include/linux/module.h index 94acbacdcdf1..b3a643435357 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -773,7 +773,8 @@ void *__module_writable_address(struct module *mod, void *loc); static inline void *module_writable_address(struct module *mod, void *loc) { - if (!IS_ENABLED(CONFIG_ARCH_HAS_EXECMEM_ROX) || !mod) + if (!IS_ENABLED(CONFIG_ARCH_HAS_EXECMEM_ROX) || !mod || + mod->state != MODULE_STATE_UNFORMED) return loc; return __module_writable_address(mod, loc); } diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h index 341980599c71..e45531455d3b 100644 --- a/include/linux/seccomp.h +++ b/include/linux/seccomp.h @@ -55,10 +55,10 @@ struct seccomp_data; #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER static inline int secure_computing(void) { return 0; } -static inline int __secure_computing(const struct seccomp_data *sd) { return 0; } #else static inline void secure_computing_strict(int this_syscall) { return; } #endif +static inline int __secure_computing(const struct seccomp_data *sd) { return 0; } static inline long prctl_get_seccomp(void) { diff --git a/include/linux/userfaultfd_k.h b/include/linux/userfaultfd_k.h index cb40f1a1d081..75342022d144 100644 --- a/include/linux/userfaultfd_k.h +++ b/include/linux/userfaultfd_k.h @@ -247,6 +247,13 @@ static inline bool vma_can_userfault(struct vm_area_struct *vma, vma_is_shmem(vma); } +static inline bool vma_has_uffd_without_event_remap(struct vm_area_struct *vma) +{ + struct userfaultfd_ctx *uffd_ctx = vma->vm_userfaultfd_ctx.ctx; + + return uffd_ctx && (uffd_ctx->features & UFFD_FEATURE_EVENT_REMAP) == 0; +} + extern int dup_userfaultfd(struct vm_area_struct *, struct list_head *); extern void dup_userfaultfd_complete(struct list_head *); void dup_userfaultfd_fail(struct list_head *); @@ -402,6 +409,11 @@ static inline bool userfaultfd_wp_async(struct vm_area_struct *vma) return false; } +static inline bool vma_has_uffd_without_event_remap(struct vm_area_struct *vma) +{ + return false; +} + #endif /* CONFIG_USERFAULTFD */ static inline bool userfaultfd_wp_use_markers(struct vm_area_struct *vma) diff --git a/include/trace/events/hugetlbfs.h b/include/trace/events/hugetlbfs.h index 8331c904a9ba..59605dfaeeb4 100644 --- a/include/trace/events/hugetlbfs.h +++ b/include/trace/events/hugetlbfs.h @@ -23,7 +23,7 @@ TRACE_EVENT(hugetlbfs_alloc_inode, TP_fast_assign( __entry->dev = inode->i_sb->s_dev; __entry->ino = inode->i_ino; - __entry->dir = dir->i_ino; + __entry->dir = dir ? dir->i_ino : 0; __entry->mode = mode; ), diff --git a/mm/filemap.c b/mm/filemap.c index 33b60d448fca..4f476411a9a2 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1523,7 +1523,7 @@ void folio_end_read(struct folio *folio, bool success) /* Must be in bottom byte for x86 to work */ BUILD_BUG_ON(PG_uptodate > 7); VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio); - VM_BUG_ON_FOLIO(folio_test_uptodate(folio), folio); + VM_BUG_ON_FOLIO(success && folio_test_uptodate(folio), folio); if (likely(success)) mask |= 1 << PG_uptodate; @@ -2996,7 +2996,7 @@ static inline loff_t folio_seek_hole_data(struct xa_state *xas, if (ops->is_partially_uptodate(folio, offset, bsz) == seek_data) break; - start = (start + bsz) & ~(bsz - 1); + start = (start + bsz) & ~((u64)bsz - 1); offset += bsz; } while (offset < folio_size(folio)); unlock: diff --git a/mm/huge_memory.c b/mm/huge_memory.c index e53d83b3e5cf..db64116a4f84 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2206,6 +2206,16 @@ static pmd_t move_soft_dirty_pmd(pmd_t pmd) return pmd; } +static pmd_t clear_uffd_wp_pmd(pmd_t pmd) +{ + if (pmd_present(pmd)) + pmd = pmd_clear_uffd_wp(pmd); + else if (is_swap_pmd(pmd)) + pmd = pmd_swp_clear_uffd_wp(pmd); + + return pmd; +} + bool move_huge_pmd(struct vm_area_struct *vma, unsigned long old_addr, unsigned long new_addr, pmd_t *old_pmd, pmd_t *new_pmd) { @@ -2244,6 +2254,8 @@ bool move_huge_pmd(struct vm_area_struct *vma, unsigned long old_addr, pgtable_trans_huge_deposit(mm, new_pmd, pgtable); } pmd = move_soft_dirty_pmd(pmd); + if (vma_has_uffd_without_event_remap(vma)) + pmd = clear_uffd_wp_pmd(pmd); set_pmd_at(mm, new_addr, new_pmd, pmd); if (force_flush) flush_pmd_tlb_range(vma, old_addr, old_addr + PMD_SIZE); diff --git a/mm/hugetlb.c b/mm/hugetlb.c index c498874a7170..eaaec19caa7c 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -5402,6 +5402,7 @@ static void move_huge_pte(struct vm_area_struct *vma, unsigned long old_addr, unsigned long new_addr, pte_t *src_pte, pte_t *dst_pte, unsigned long sz) { + bool need_clear_uffd_wp = vma_has_uffd_without_event_remap(vma); struct hstate *h = hstate_vma(vma); struct mm_struct *mm = vma->vm_mm; spinlock_t *src_ptl, *dst_ptl; @@ -5418,7 +5419,18 @@ static void move_huge_pte(struct vm_area_struct *vma, unsigned long old_addr, spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING); pte = huge_ptep_get_and_clear(mm, old_addr, src_pte); - set_huge_pte_at(mm, new_addr, dst_pte, pte, sz); + + if (need_clear_uffd_wp && pte_marker_uffd_wp(pte)) + huge_pte_clear(mm, new_addr, dst_pte, sz); + else { + if (need_clear_uffd_wp) { + if (pte_present(pte)) + pte = huge_pte_clear_uffd_wp(pte); + else if (is_swap_pte(pte)) + pte = pte_swp_clear_uffd_wp(pte); + } + set_huge_pte_at(mm, new_addr, dst_pte, pte, sz); + } if (src_ptl != dst_ptl) spin_unlock(src_ptl); diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 737af23f4f4e..820ba3b5cbfc 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1093,7 +1093,7 @@ void __ref kmemleak_alloc_percpu(const void __percpu *ptr, size_t size, pr_debug("%s(0x%px, %zu)\n", __func__, ptr, size); if (kmemleak_enabled && ptr && !IS_ERR_PCPU(ptr)) - create_object_percpu((__force unsigned long)ptr, size, 0, gfp); + create_object_percpu((__force unsigned long)ptr, size, 1, gfp); } EXPORT_SYMBOL_GPL(kmemleak_alloc_percpu); diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 04f35659717a..162407fbf2bc 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -2268,7 +2268,8 @@ struct page *alloc_pages_mpol_noprof(gfp_t gfp, unsigned int order, page = __alloc_pages_noprof(gfp, order, nid, nodemask); - if (unlikely(pol->mode == MPOL_INTERLEAVE) && page) { + if (unlikely(pol->mode == MPOL_INTERLEAVE || + pol->mode == MPOL_WEIGHTED_INTERLEAVE) && page) { /* skip NUMA_INTERLEAVE_HIT update if numa stats is disabled */ if (static_branch_likely(&vm_numa_stat_key) && page_to_nid(page) == nid) { diff --git a/mm/mremap.c b/mm/mremap.c index 60473413836b..cff7f552f909 100644 --- a/mm/mremap.c +++ b/mm/mremap.c @@ -138,6 +138,7 @@ static int move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd, struct vm_area_struct *new_vma, pmd_t *new_pmd, unsigned long new_addr, bool need_rmap_locks) { + bool need_clear_uffd_wp = vma_has_uffd_without_event_remap(vma); struct mm_struct *mm = vma->vm_mm; pte_t *old_pte, *new_pte, pte; pmd_t dummy_pmdval; @@ -216,7 +217,18 @@ static int move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd, force_flush = true; pte = move_pte(pte, old_addr, new_addr); pte = move_soft_dirty_pte(pte); - set_pte_at(mm, new_addr, new_pte, pte); + + if (need_clear_uffd_wp && pte_marker_uffd_wp(pte)) + pte_clear(mm, new_addr, new_pte); + else { + if (need_clear_uffd_wp) { + if (pte_present(pte)) + pte = pte_clear_uffd_wp(pte); + else if (is_swap_pte(pte)) + pte = pte_swp_clear_uffd_wp(pte); + } + set_pte_at(mm, new_addr, new_pte, pte); + } } arch_leave_lazy_mmu_mode(); @@ -278,6 +290,15 @@ static bool move_normal_pmd(struct vm_area_struct *vma, unsigned long old_addr, if (WARN_ON_ONCE(!pmd_none(*new_pmd))) return false; + /* If this pmd belongs to a uffd vma with remap events disabled, we need + * to ensure that the uffd-wp state is cleared from all pgtables. This + * means recursing into lower page tables in move_page_tables(), and we + * can reuse the existing code if we simply treat the entry as "not + * moved". + */ + if (vma_has_uffd_without_event_remap(vma)) + return false; + /* * We don't have to worry about the ordering of src and dst * ptlocks because exclusive mmap_lock prevents deadlock. @@ -333,6 +354,15 @@ static bool move_normal_pud(struct vm_area_struct *vma, unsigned long old_addr, if (WARN_ON_ONCE(!pud_none(*new_pud))) return false; + /* If this pud belongs to a uffd vma with remap events disabled, we need + * to ensure that the uffd-wp state is cleared from all pgtables. This + * means recursing into lower page tables in move_page_tables(), and we + * can reuse the existing code if we simply treat the entry as "not + * moved". + */ + if (vma_has_uffd_without_event_remap(vma)) + return false; + /* * We don't have to worry about the ordering of src and dst * ptlocks because exclusive mmap_lock prevents deadlock. diff --git a/mm/page-writeback.c b/mm/page-writeback.c index d213ead95675..d9861e42b2bd 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -692,6 +692,8 @@ static unsigned long bdi_ratio_from_pages(unsigned long pages) unsigned long ratio; global_dirty_limits(&background_thresh, &dirty_thresh); + if (!dirty_thresh) + return -EINVAL; ratio = div64_u64(pages * 100ULL * BDI_RATIO_SCALE, dirty_thresh); return ratio; @@ -790,13 +792,15 @@ int bdi_set_min_bytes(struct backing_dev_info *bdi, u64 min_bytes) { int ret; unsigned long pages = min_bytes >> PAGE_SHIFT; - unsigned long min_ratio; + long min_ratio; ret = bdi_check_pages_limit(pages); if (ret) return ret; min_ratio = bdi_ratio_from_pages(pages); + if (min_ratio < 0) + return min_ratio; return __bdi_set_min_ratio(bdi, min_ratio); } @@ -809,13 +813,15 @@ int bdi_set_max_bytes(struct backing_dev_info *bdi, u64 max_bytes) { int ret; unsigned long pages = max_bytes >> PAGE_SHIFT; - unsigned long max_ratio; + long max_ratio; ret = bdi_check_pages_limit(pages); if (ret) return ret; max_ratio = bdi_ratio_from_pages(pages); + if (max_ratio < 0) + return max_ratio; return __bdi_set_max_ratio(bdi, max_ratio); } diff --git a/mm/vmscan.c b/mm/vmscan.c index 9a859b7d18d7..b1ec5ece067e 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -4642,6 +4642,9 @@ retry: reset_batch_size(walk); } + __mod_lruvec_state(lruvec, PGDEMOTE_KSWAPD + reclaimer_offset(), + stat.nr_demoted); + item = PGSTEAL_KSWAPD + reclaimer_offset(); if (!cgroup_reclaim(sc)) __count_vm_events(item, reclaimed); diff --git a/mm/vmstat.c b/mm/vmstat.c index 4d016314a56c..16bfe1c694dd 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -2122,10 +2122,20 @@ static void __init start_shepherd_timer(void) { int cpu; - for_each_possible_cpu(cpu) + for_each_possible_cpu(cpu) { INIT_DEFERRABLE_WORK(per_cpu_ptr(&vmstat_work, cpu), vmstat_update); + /* + * For secondary CPUs during CPU hotplug scenarios, + * vmstat_cpu_online() will enable the work. + * mm/vmstat:online enables and disables vmstat_work + * symmetrically during CPU hotplug events. + */ + if (!cpu_online(cpu)) + disable_delayed_work_sync(&per_cpu(vmstat_work, cpu)); + } + schedule_delayed_work(&shepherd, round_jiffies_relative(sysctl_stat_interval)); } @@ -2148,13 +2158,14 @@ static int vmstat_cpu_online(unsigned int cpu) if (!node_state(cpu_to_node(cpu), N_CPU)) { node_set_state(cpu_to_node(cpu), N_CPU); } + enable_delayed_work(&per_cpu(vmstat_work, cpu)); return 0; } static int vmstat_cpu_down_prep(unsigned int cpu) { - cancel_delayed_work_sync(&per_cpu(vmstat_work, cpu)); + disable_delayed_work_sync(&per_cpu(vmstat_work, cpu)); return 0; } diff --git a/mm/zswap.c b/mm/zswap.c index 5a27af8d86ea..30f5a27a6862 100644 --- a/mm/zswap.c +++ b/mm/zswap.c @@ -251,7 +251,7 @@ static struct zswap_pool *zswap_pool_create(char *type, char *compressor) struct zswap_pool *pool; char name[38]; /* 'zswap' + 32 char (max) num + \0 */ gfp_t gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM; - int ret; + int ret, cpu; if (!zswap_has_pool) { /* if either are unset, pool initialization failed, and we @@ -285,6 +285,9 @@ static struct zswap_pool *zswap_pool_create(char *type, char *compressor) goto error; } + for_each_possible_cpu(cpu) + mutex_init(&per_cpu_ptr(pool->acomp_ctx, cpu)->mutex); + ret = cpuhp_state_add_instance(CPUHP_MM_ZSWP_POOL_PREPARE, &pool->node); if (ret) @@ -821,11 +824,12 @@ static int zswap_cpu_comp_prepare(unsigned int cpu, struct hlist_node *node) struct acomp_req *req; int ret; - mutex_init(&acomp_ctx->mutex); - + mutex_lock(&acomp_ctx->mutex); acomp_ctx->buffer = kmalloc_node(PAGE_SIZE * 2, GFP_KERNEL, cpu_to_node(cpu)); - if (!acomp_ctx->buffer) - return -ENOMEM; + if (!acomp_ctx->buffer) { + ret = -ENOMEM; + goto buffer_fail; + } acomp = crypto_alloc_acomp_node(pool->tfm_name, 0, 0, cpu_to_node(cpu)); if (IS_ERR(acomp)) { @@ -855,12 +859,15 @@ static int zswap_cpu_comp_prepare(unsigned int cpu, struct hlist_node *node) acomp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, crypto_req_done, &acomp_ctx->wait); + mutex_unlock(&acomp_ctx->mutex); return 0; req_fail: crypto_free_acomp(acomp_ctx->acomp); acomp_fail: kfree(acomp_ctx->buffer); +buffer_fail: + mutex_unlock(&acomp_ctx->mutex); return ret; } @@ -869,27 +876,43 @@ static int zswap_cpu_comp_dead(unsigned int cpu, struct hlist_node *node) struct zswap_pool *pool = hlist_entry(node, struct zswap_pool, node); struct crypto_acomp_ctx *acomp_ctx = per_cpu_ptr(pool->acomp_ctx, cpu); + mutex_lock(&acomp_ctx->mutex); if (!IS_ERR_OR_NULL(acomp_ctx)) { if (!IS_ERR_OR_NULL(acomp_ctx->req)) acomp_request_free(acomp_ctx->req); + acomp_ctx->req = NULL; if (!IS_ERR_OR_NULL(acomp_ctx->acomp)) crypto_free_acomp(acomp_ctx->acomp); kfree(acomp_ctx->buffer); } + mutex_unlock(&acomp_ctx->mutex); return 0; } -/* Prevent CPU hotplug from freeing up the per-CPU acomp_ctx resources */ -static struct crypto_acomp_ctx *acomp_ctx_get_cpu(struct crypto_acomp_ctx __percpu *acomp_ctx) +static struct crypto_acomp_ctx *acomp_ctx_get_cpu_lock(struct zswap_pool *pool) { - cpus_read_lock(); - return raw_cpu_ptr(acomp_ctx); + struct crypto_acomp_ctx *acomp_ctx; + + for (;;) { + acomp_ctx = raw_cpu_ptr(pool->acomp_ctx); + mutex_lock(&acomp_ctx->mutex); + if (likely(acomp_ctx->req)) + return acomp_ctx; + /* + * It is possible that we were migrated to a different CPU after + * getting the per-CPU ctx but before the mutex was acquired. If + * the old CPU got offlined, zswap_cpu_comp_dead() could have + * already freed ctx->req (among other things) and set it to + * NULL. Just try again on the new CPU that we ended up on. + */ + mutex_unlock(&acomp_ctx->mutex); + } } -static void acomp_ctx_put_cpu(void) +static void acomp_ctx_put_unlock(struct crypto_acomp_ctx *acomp_ctx) { - cpus_read_unlock(); + mutex_unlock(&acomp_ctx->mutex); } static bool zswap_compress(struct page *page, struct zswap_entry *entry, @@ -905,9 +928,7 @@ static bool zswap_compress(struct page *page, struct zswap_entry *entry, gfp_t gfp; u8 *dst; - acomp_ctx = acomp_ctx_get_cpu(pool->acomp_ctx); - mutex_lock(&acomp_ctx->mutex); - + acomp_ctx = acomp_ctx_get_cpu_lock(pool); dst = acomp_ctx->buffer; sg_init_table(&input, 1); sg_set_page(&input, page, PAGE_SIZE, 0); @@ -960,8 +981,7 @@ unlock: else if (alloc_ret) zswap_reject_alloc_fail++; - mutex_unlock(&acomp_ctx->mutex); - acomp_ctx_put_cpu(); + acomp_ctx_put_unlock(acomp_ctx); return comp_ret == 0 && alloc_ret == 0; } @@ -972,9 +992,7 @@ static void zswap_decompress(struct zswap_entry *entry, struct folio *folio) struct crypto_acomp_ctx *acomp_ctx; u8 *src; - acomp_ctx = acomp_ctx_get_cpu(entry->pool->acomp_ctx); - mutex_lock(&acomp_ctx->mutex); - + acomp_ctx = acomp_ctx_get_cpu_lock(entry->pool); src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO); /* * If zpool_map_handle is atomic, we cannot reliably utilize its mapped buffer @@ -998,11 +1016,10 @@ static void zswap_decompress(struct zswap_entry *entry, struct folio *folio) acomp_request_set_params(acomp_ctx->req, &input, &output, entry->length, PAGE_SIZE); BUG_ON(crypto_wait_req(crypto_acomp_decompress(acomp_ctx->req), &acomp_ctx->wait)); BUG_ON(acomp_ctx->req->dlen != PAGE_SIZE); - mutex_unlock(&acomp_ctx->mutex); if (src != acomp_ctx->buffer) zpool_unmap_handle(zpool, entry->handle); - acomp_ctx_put_cpu(); + acomp_ctx_put_unlock(acomp_ctx); } /********************************* diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh index 46fa18b80fc1..17abc4e7a985 100755 --- a/scripts/decode_stacktrace.sh +++ b/scripts/decode_stacktrace.sh @@ -286,6 +286,18 @@ handle_line() { last=$(( $last - 1 )) fi + # Extract info after the symbol if present. E.g.: + # func_name+0x54/0x80 (P) + # ^^^ + # The regex assumes only uppercase letters will be used. To be + # extended if needed. + local info_str="" + if [[ ${words[$last]} =~ \([A-Z]*\) ]]; then + info_str=${words[$last]} + unset words[$last] + last=$(( $last - 1 )) + fi + if [[ ${words[$last]} =~ \[([^]]+)\] ]]; then module=${words[$last]} # some traces format is "(%pS)", which like "(foo+0x0/0x1 [bar])" @@ -313,9 +325,9 @@ handle_line() { # Add up the line number to the symbol if [[ -z ${module} ]] then - echo "${words[@]}" "$symbol" + echo "${words[@]}" "$symbol ${info_str}" else - echo "${words[@]}" "$symbol $module" + echo "${words[@]}" "$symbol $module ${info_str}" fi } diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b74b566f675e..ad66378d7321 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10641,6 +10641,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1e1f, "ASUS Vivobook 15 X1504VAP", ALC2XX_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS), + SND_PCI_QUIRK(0x1043, 0x1e63, "ASUS H7606W", ALC285_FIXUP_ASUS_GU605_SPI_SPEAKER2_TO_DAC1), + SND_PCI_QUIRK(0x1043, 0x1e83, "ASUS GA605W", ALC285_FIXUP_ASUS_GU605_SPI_SPEAKER2_TO_DAC1), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1eb3, "ASUS Ally RCLA72", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x1043, 0x1ed3, "ASUS HN7306W", ALC287_FIXUP_CS35L41_I2C_2), @@ -10930,8 +10932,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x38e0, "Yoga Y990 Intel VECO Dual", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x38f8, "Yoga Book 9i", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x38df, "Y990 YG DUAL", ALC287_FIXUP_TAS2781_I2C), - SND_PCI_QUIRK(0x17aa, 0x38f9, "Thinkbook 16P Gen5", ALC287_FIXUP_CS35L41_I2C_2), - SND_PCI_QUIRK(0x17aa, 0x38fa, "Thinkbook 16P Gen5", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x38f9, "Thinkbook 16P Gen5", ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD), + SND_PCI_QUIRK(0x17aa, 0x38fa, "Thinkbook 16P Gen5", ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x38fd, "ThinkBook plus Gen5 Hybrid", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3913, "Lenovo 145", ALC236_FIXUP_LENOVO_INV_DMIC), @@ -10995,6 +10997,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1945, "Redmi G", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1947, "RedmiBook Air", ALC255_FIXUP_XIAOMI_HEADSET_MIC), + SND_PCI_QUIRK(0x1f66, 0x0105, "Ayaneo Portable Game Player", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x2782, 0x0214, "VAIO VJFE-CL", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x2782, 0x0228, "Infinix ZERO BOOK 13", ALC269VB_FIXUP_INFINIX_ZERO_BOOK_13), SND_PCI_QUIRK(0x2782, 0x0232, "CHUWI CoreBook XPro", ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO), diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0f2df7c91e18..0b9e87dc2b6c 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -2451,6 +2451,7 @@ config SND_SOC_WM8993 config SND_SOC_WM8994 tristate + depends on MFD_WM8994 config SND_SOC_WM8995 tristate diff --git a/sound/soc/codecs/cs42l43.c b/sound/soc/codecs/cs42l43.c index 4236f78beec0..83c21c17fb80 100644 --- a/sound/soc/codecs/cs42l43.c +++ b/sound/soc/codecs/cs42l43.c @@ -2404,6 +2404,7 @@ static int cs42l43_codec_runtime_resume(struct device *dev) static const struct dev_pm_ops cs42l43_codec_pm_ops = { RUNTIME_PM_OPS(NULL, cs42l43_codec_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) }; static const struct platform_device_id cs42l43_codec_id_table[] = { diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c index 61729e5b50a8..f508df01145b 100644 --- a/sound/soc/codecs/es8316.c +++ b/sound/soc/codecs/es8316.c @@ -39,7 +39,9 @@ struct es8316_priv { struct snd_soc_jack *jack; int irq; unsigned int sysclk; - unsigned int allowed_rates[ARRAY_SIZE(supported_mclk_lrck_ratios)]; + /* ES83xx supports halving the MCLK so it supports twice as many rates + */ + unsigned int allowed_rates[ARRAY_SIZE(supported_mclk_lrck_ratios) * 2]; struct snd_pcm_hw_constraint_list sysclk_constraints; bool jd_inverted; }; @@ -386,6 +388,12 @@ static int es8316_set_dai_sysclk(struct snd_soc_dai *codec_dai, if (freq % ratio == 0) es8316->allowed_rates[count++] = freq / ratio; + + /* We also check if the halved MCLK produces a valid rate + * since the codec supports halving the MCLK. + */ + if ((freq / ratio) % 2 == 0) + es8316->allowed_rates[count++] = freq / ratio / 2; } if (count) { diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index a5603b617688..b06eead7e0f6 100644 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -616,7 +616,7 @@ static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction) 0x0F, 0x0F); if (es8326->version > ES8326_VERSION_B) { regmap_update_bits(es8326->regmap, ES8326_VMIDSEL, 0x40, 0x40); - regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x10); + regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x30); } } } else { @@ -631,6 +631,8 @@ static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction) regmap_write(es8326->regmap, ES8326_HPR_OFFSET_INI, offset_r); es8326->calibrated = true; } + regmap_update_bits(es8326->regmap, ES8326_CLK_INV, 0xc0, 0x00); + regmap_update_bits(es8326->regmap, ES8326_CLK_MUX, 0x80, 0x00); if (direction == SNDRV_PCM_STREAM_PLAYBACK) { regmap_update_bits(es8326->regmap, ES8326_DAC_DSM, 0x01, 0x01); usleep_range(1000, 5000); @@ -645,7 +647,7 @@ static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction) } else { msleep(300); if (es8326->version > ES8326_VERSION_B) { - regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x50); + regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x70); regmap_update_bits(es8326->regmap, ES8326_VMIDSEL, 0x40, 0x00); } regmap_update_bits(es8326->regmap, ES8326_ADC_MUTE, @@ -676,6 +678,10 @@ static int es8326_set_bias_level(struct snd_soc_component *codec, regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x00); regmap_update_bits(es8326->regmap, ES8326_CLK_CTL, 0x20, 0x20); regmap_update_bits(es8326->regmap, ES8326_RESET, 0x02, 0x00); + if (es8326->version > ES8326_VERSION_B) { + regmap_update_bits(es8326->regmap, ES8326_VMIDSEL, 0x40, 0x40); + regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x30); + } break; case SND_SOC_BIAS_PREPARE: break; @@ -683,6 +689,12 @@ static int es8326_set_bias_level(struct snd_soc_component *codec, regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x3b); regmap_update_bits(es8326->regmap, ES8326_CLK_CTL, 0x20, 0x00); regmap_write(es8326->regmap, ES8326_SDINOUT1_IO, ES8326_IO_INPUT); + if (es8326->version > ES8326_VERSION_B) { + regmap_update_bits(es8326->regmap, ES8326_VMIDSEL, 0x40, 0x40); + regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x70, 0x10); + } + regmap_update_bits(es8326->regmap, ES8326_CLK_INV, 0xc0, 0xc0); + regmap_update_bits(es8326->regmap, ES8326_CLK_MUX, 0x80, 0x80); break; case SND_SOC_BIAS_OFF: clk_disable_unprepare(es8326->mclk); @@ -773,7 +785,10 @@ static void es8326_jack_button_handler(struct work_struct *work) case 0x6f: case 0x4b: /* button volume up */ - cur_button = SND_JACK_BTN_1; + if ((iface == 0x6f) && (es8326->version > ES8326_VERSION_B)) + cur_button = SND_JACK_BTN_0; + else + cur_button = SND_JACK_BTN_1; break; case 0x27: /* button volume down */ @@ -1082,7 +1097,7 @@ static void es8326_init(struct snd_soc_component *component) regmap_write(es8326->regmap, ES8326_ADC2_SRC, 0x66); es8326_disable_micbias(es8326->component); if (es8326->version > ES8326_VERSION_B) { - regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x73, 0x13); + regmap_update_bits(es8326->regmap, ES8326_ANA_MICBIAS, 0x73, 0x10); regmap_update_bits(es8326->regmap, ES8326_VMIDSEL, 0x40, 0x40); } diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index fb8cd2284fe8..728bf78ae71f 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -78,7 +78,7 @@ static const struct bulk_reg_val tas2781_cali_start_reg[] = { X2781_CL_STT_VAL(TAS2781_PRM_INT_MASK_REG, 0xfe, false), X2781_CL_STT_VAL(TAS2781_PRM_CLK_CFG_REG, 0xdd, false), X2781_CL_STT_VAL(TAS2781_PRM_RSVD_REG, 0x20, false), - X2781_CL_STT_VAL(TAS2781_PRM_TEST_57_REG, 0x14, false), + X2781_CL_STT_VAL(TAS2781_PRM_TEST_57_REG, 0x14, true), X2781_CL_STT_VAL(TAS2781_PRM_TEST_62_REG, 0x45, true), X2781_CL_STT_VAL(TAS2781_PRM_PVDD_UVLO_REG, 0x03, false), X2781_CL_STT_VAL(TAS2781_PRM_CHNL_0_REG, 0xa8, false), diff --git a/sound/soc/renesas/rcar/adg.c b/sound/soc/renesas/rcar/adg.c index 0f190abf00e7..191f212d338c 100644 --- a/sound/soc/renesas/rcar/adg.c +++ b/sound/soc/renesas/rcar/adg.c @@ -374,12 +374,12 @@ int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *ssi_mod, unsigned int rate) return 0; } -void rsnd_adg_clk_control(struct rsnd_priv *priv, int enable) +int rsnd_adg_clk_control(struct rsnd_priv *priv, int enable) { struct rsnd_adg *adg = rsnd_priv_to_adg(priv); struct rsnd_mod *adg_mod = rsnd_mod_get(adg); struct clk *clk; - int i; + int ret = 0, i; if (enable) { rsnd_mod_bset(adg_mod, BRGCKR, 0x80770000, adg->ckr); @@ -389,18 +389,33 @@ void rsnd_adg_clk_control(struct rsnd_priv *priv, int enable) for_each_rsnd_clkin(clk, adg, i) { if (enable) { - clk_prepare_enable(clk); + ret = clk_prepare_enable(clk); /* * We shouldn't use clk_get_rate() under * atomic context. Let's keep it when * rsnd_adg_clk_enable() was called */ + if (ret < 0) + break; + adg->clkin_rate[i] = clk_get_rate(clk); } else { - clk_disable_unprepare(clk); + if (adg->clkin_rate[i]) + clk_disable_unprepare(clk); + + adg->clkin_rate[i] = 0; } } + + /* + * rsnd_adg_clk_enable() might return error (_disable() will not). + * We need to rollback in such case + */ + if (ret < 0) + rsnd_adg_clk_disable(priv); + + return ret; } static struct clk *rsnd_adg_create_null_clk(struct rsnd_priv *priv, @@ -753,7 +768,10 @@ int rsnd_adg_probe(struct rsnd_priv *priv) if (ret) return ret; - rsnd_adg_clk_enable(priv); + ret = rsnd_adg_clk_enable(priv); + if (ret) + return ret; + rsnd_adg_clk_dbg_info(priv, NULL); return 0; diff --git a/sound/soc/renesas/rcar/core.c b/sound/soc/renesas/rcar/core.c index e2234928c9e8..d3709fd0409e 100644 --- a/sound/soc/renesas/rcar/core.c +++ b/sound/soc/renesas/rcar/core.c @@ -2086,9 +2086,7 @@ static int __maybe_unused rsnd_resume(struct device *dev) { struct rsnd_priv *priv = dev_get_drvdata(dev); - rsnd_adg_clk_enable(priv); - - return 0; + return rsnd_adg_clk_enable(priv); } static const struct dev_pm_ops rsnd_pm_ops = { diff --git a/sound/soc/renesas/rcar/rsnd.h b/sound/soc/renesas/rcar/rsnd.h index 3c164d8e3b16..a5f54b65313c 100644 --- a/sound/soc/renesas/rcar/rsnd.h +++ b/sound/soc/renesas/rcar/rsnd.h @@ -608,7 +608,7 @@ int rsnd_adg_set_cmd_timsel_gen2(struct rsnd_mod *cmd_mod, struct rsnd_dai_stream *io); #define rsnd_adg_clk_enable(priv) rsnd_adg_clk_control(priv, 1) #define rsnd_adg_clk_disable(priv) rsnd_adg_clk_control(priv, 0) -void rsnd_adg_clk_control(struct rsnd_priv *priv, int enable); +int rsnd_adg_clk_control(struct rsnd_priv *priv, int enable); void rsnd_adg_clk_dbg_info(struct rsnd_priv *priv, struct seq_file *m); /* diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 4b1ea7b2c796..60b4b7b75215 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -127,8 +127,9 @@ config SND_SOC_SAMSUNG_TM2_WM5110 config SND_SOC_SAMSUNG_ARIES_WM8994 tristate "SoC I2S Audio support for WM8994 on Aries" - depends on SND_SOC_SAMSUNG && MFD_WM8994 && IIO && EXTCON + depends on SND_SOC_SAMSUNG && I2C && IIO && EXTCON select SND_SOC_BT_SCO + select MFD_WM8994 select SND_SOC_WM8994 select SND_SAMSUNG_I2S help @@ -140,8 +141,9 @@ config SND_SOC_SAMSUNG_ARIES_WM8994 config SND_SOC_SAMSUNG_MIDAS_WM1811 tristate "SoC I2S Audio support for Midas boards" - depends on SND_SOC_SAMSUNG && IIO + depends on SND_SOC_SAMSUNG && I2C && IIO select SND_SAMSUNG_I2S + select MFD_WM8994 select SND_SOC_WM8994 help Say Y if you want to add support for SoC audio on the Midas boards. diff --git a/tools/testing/selftests/mm/cow.c b/tools/testing/selftests/mm/cow.c index 32c6ccc2a6be..1238e1c5aae1 100644 --- a/tools/testing/selftests/mm/cow.c +++ b/tools/testing/selftests/mm/cow.c @@ -758,7 +758,7 @@ static void do_run_with_base_page(test_fn fn, bool swapout) } /* Populate a base page. */ - memset(mem, 0, pagesize); + memset(mem, 1, pagesize); if (swapout) { madvise(mem, pagesize, MADV_PAGEOUT); @@ -824,12 +824,12 @@ static void do_run_with_thp(test_fn fn, enum thp_run thp_run, size_t thpsize) * Try to populate a THP. Touch the first sub-page and test if * we get the last sub-page populated automatically. */ - mem[0] = 0; + mem[0] = 1; if (!pagemap_is_populated(pagemap_fd, mem + thpsize - pagesize)) { ksft_test_result_skip("Did not get a THP populated\n"); goto munmap; } - memset(mem, 0, thpsize); + memset(mem, 1, thpsize); size = thpsize; switch (thp_run) { @@ -1012,7 +1012,7 @@ static void run_with_hugetlb(test_fn fn, const char *desc, size_t hugetlbsize) } /* Populate an huge page. */ - memset(mem, 0, hugetlbsize); + memset(mem, 1, hugetlbsize); /* * We need a total of two hugetlb pages to handle COW/unsharing diff --git a/tools/testing/shared/linux/maple_tree.h b/tools/testing/shared/linux/maple_tree.h index 06c89bdcc515..f67d47d32857 100644 --- a/tools/testing/shared/linux/maple_tree.h +++ b/tools/testing/shared/linux/maple_tree.h @@ -2,6 +2,6 @@ #define atomic_t int32_t #define atomic_inc(x) uatomic_inc(x) #define atomic_read(x) uatomic_read(x) -#define atomic_set(x, y) do {} while (0) +#define atomic_set(x, y) uatomic_set(x, y) #define U8_MAX UCHAR_MAX #include "../../../../include/linux/maple_tree.h" diff --git a/tools/testing/vma/linux/atomic.h b/tools/testing/vma/linux/atomic.h index e01f66f98982..3e1b6adc027b 100644 --- a/tools/testing/vma/linux/atomic.h +++ b/tools/testing/vma/linux/atomic.h @@ -6,7 +6,7 @@ #define atomic_t int32_t #define atomic_inc(x) uatomic_inc(x) #define atomic_read(x) uatomic_read(x) -#define atomic_set(x, y) do {} while (0) +#define atomic_set(x, y) uatomic_set(x, y) #define U8_MAX UCHAR_MAX #endif /* _LINUX_ATOMIC_H */ |