diff options
| -rw-r--r-- | drivers/mmc/host/mtk-sd.c | 16 |
1 files changed, 12 insertions, 4 deletions
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index a9bd0bc4d4eb..31eb90536bce 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -84,6 +84,7 @@ #define EMMC51_CFG0 0x204 #define EMMC50_CFG0 0x208 #define EMMC50_CFG1 0x20c +#define EMMC50_CFG2 0x21c #define EMMC50_CFG3 0x220 #define SDC_FIFO_CFG 0x228 #define CQHCI_SETTING 0x7fc @@ -306,7 +307,10 @@ /* EMMC50_CFG1 mask */ #define EMMC50_CFG1_DS_CFG BIT(28) /* RW */ -#define EMMC50_CFG3_OUTS_WR GENMASK(4, 0) /* RW */ +/* EMMC50_CFG2 mask */ +#define EMMC50_CFG2_AXI_SET_LEN GENMASK(27, 24) /* RW */ + +#define EMMC50_CFG3_OUTS_WR GENMASK(4, 0) /* RW */ #define SDC_FIFO_CFG_WRVALIDSEL BIT(24) /* RW */ #define SDC_FIFO_CFG_RDVALIDSEL BIT(25) /* RW */ @@ -1917,9 +1921,13 @@ static void msdc_init_hw(struct msdc_host *host) pb1_val |= FIELD_PREP(MSDC_PATCH_BIT1_CMDTA, 1); pb1_val |= MSDC_PB1_DDR_CMD_FIX_SEL; - /* Set single burst mode, auto sync state clear, block gap stop clk */ - pb1_val |= MSDC_PB1_SINGLE_BURST | MSDC_PB1_RSVD20 | - MSDC_PB1_AUTO_SYNCST_CLR | MSDC_PB1_MARK_POP_WATER; + /* Support 'single' burst type only when AXI_LEN is 0 */ + sdr_get_field(host->base + EMMC50_CFG2, EMMC50_CFG2_AXI_SET_LEN, &val); + if (!val) + pb1_val |= MSDC_PB1_SINGLE_BURST; + + /* Set auto sync state clear, block gap stop clk */ + pb1_val |= MSDC_PB1_RSVD20 | MSDC_PB1_AUTO_SYNCST_CLR | MSDC_PB1_MARK_POP_WATER; /* Set low power DCM, use HCLK for GDMA, use MSDC CLK for everything else */ pb1_val |= MSDC_PB1_LP_DCM_EN | MSDC_PB1_RSVD3 | |