diff options
| -rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml | 67 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt | 44 |
2 files changed, 67 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml new file mode 100644 index 000000000000..27d36173366a --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/st,spear300-shirq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPEAr3xx Shared IRQ controller + +maintainers: + - Viresh Kumar <vireshk@kernel.org> + - Shiraz Hashim <shiraz.linux.kernel@gmail.com> + +description: | + SPEAr3xx architecture includes shared/multiplexed irqs for certain set of + devices. The multiplexor provides a single interrupt to parent interrupt + controller (VIC) on behalf of a group of devices. + + There can be multiple groups available on SPEAr3xx variants but not exceeding + 4. The number of devices in a group can differ, further they may share same + set of status/mask registers spanning across different bit masks. Also in some + cases the group may not have enable or other registers. This makes software + little complex. + + A single node in the device tree is used to describe the shared interrupt + multiplexer (one node for all groups). A group in the interrupt controller + shares config/control registers with other groups. For example, a 32-bit + interrupt enable/disable config register can accommodate up to 4 interrupt + groups. + +properties: + compatible: + enum: + - st,spear300-shirq + - st,spear310-shirq + - st,spear320-shirq + + reg: + maxItems: 1 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + interrupts: + description: Interrupt specifier array for SHIRQ groups + minItems: 1 + maxItems: 4 + +required: + - compatible + - reg + - '#interrupt-cells' + - interrupt-controller + - interrupts + +additionalProperties: false + +examples: + - | + interrupt-controller@b3000000 { + compatible = "st,spear320-shirq"; + reg = <0xb3000000 0x1000>; + interrupts = <28 29 30 1>; + #interrupt-cells = <1>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt deleted file mode 100644 index a407c499b3cc..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt +++ /dev/null @@ -1,44 +0,0 @@ -* SPEAr Shared IRQ layer (shirq) - -SPEAr3xx architecture includes shared/multiplexed irqs for certain set -of devices. The multiplexor provides a single interrupt to parent -interrupt controller (VIC) on behalf of a group of devices. - -There can be multiple groups available on SPEAr3xx variants but not -exceeding 4. The number of devices in a group can differ, further they -may share same set of status/mask registers spanning across different -bit masks. Also in some cases the group may not have enable or other -registers. This makes software little complex. - -A single node in the device tree is used to describe the shared -interrupt multiplexor (one node for all groups). A group in the -interrupt controller shares config/control registers with other groups. -For example, a 32-bit interrupt enable/disable config register can -accommodate up to 4 interrupt groups. - -Required properties: - - compatible: should be, either of - - "st,spear300-shirq" - - "st,spear310-shirq" - - "st,spear320-shirq" - - interrupt-controller: Identifies the node as an interrupt controller. - - #interrupt-cells: should be <1> which basically contains the offset - (starting from 0) of interrupts for all the groups. - - reg: Base address and size of shirq registers. - - interrupts: The list of interrupts generated by the groups which are - then connected to a parent interrupt controller. Each group is - associated with one of the interrupts, hence number of interrupts (to - parent) is equal to number of groups. The format of the interrupt - specifier depends in the interrupt parent controller. - -Example: - -The following is an example from the SPEAr320 SoC dtsi file. - -shirq: interrupt-controller@b3000000 { - compatible = "st,spear320-shirq"; - reg = <0xb3000000 0x1000>; - interrupts = <28 29 30 1>; - #interrupt-cells = <1>; - interrupt-controller; -}; |