diff options
| -rw-r--r-- | drivers/i2c/busses/i2c-mlxbf.c | 34 |
1 files changed, 16 insertions, 18 deletions
diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c index c035e5941fc8..39359942e4d7 100644 --- a/drivers/i2c/busses/i2c-mlxbf.c +++ b/drivers/i2c/busses/i2c-mlxbf.c @@ -198,6 +198,7 @@ #define MLXBF_I2C_MASK_8 GENMASK(7, 0) #define MLXBF_I2C_MASK_16 GENMASK(15, 0) +#define MLXBF_I2C_MASK_32 GENMASK(31, 0) #define MLXBF_I2C_MST_ADDR_OFFSET 0x200 @@ -1149,7 +1150,8 @@ static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv, MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16); writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_THIGH_MAX_TBUF); - timer = timings->timeout; + timer = mlxbf_i2c_set_timer(priv, timings->timeout, false, + MLXBF_I2C_MASK_32, MLXBF_I2C_SHIFT_0); writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT); } @@ -1159,11 +1161,7 @@ enum mlxbf_i2c_timings_config { MLXBF_I2C_TIMING_CONFIG_1000KHZ, }; -/* - * Note that the mlxbf_i2c_timings->timeout value is not related to the - * bus frequency, it is impacted by the time it takes the driver to - * complete data transmission before transaction abort. - */ +/* Timing values are in nanoseconds */ static const struct mlxbf_i2c_timings mlxbf_i2c_timings[] = { [MLXBF_I2C_TIMING_CONFIG_100KHZ] = { .scl_high = 4810, @@ -1178,8 +1176,8 @@ static const struct mlxbf_i2c_timings mlxbf_i2c_timings[] = { .scl_fall = 50, .hold_data = 300, .buf = 20000, - .thigh_max = 5000, - .timeout = 106500 + .thigh_max = 50000, + .timeout = 35000000 }, [MLXBF_I2C_TIMING_CONFIG_400KHZ] = { .scl_high = 1011, @@ -1194,24 +1192,24 @@ static const struct mlxbf_i2c_timings mlxbf_i2c_timings[] = { .scl_fall = 50, .hold_data = 300, .buf = 20000, - .thigh_max = 5000, - .timeout = 106500 + .thigh_max = 50000, + .timeout = 35000000 }, [MLXBF_I2C_TIMING_CONFIG_1000KHZ] = { - .scl_high = 600, - .scl_low = 1300, + .scl_high = 383, + .scl_low = 460, .hold_start = 600, - .setup_start = 600, - .setup_stop = 600, - .setup_data = 100, + .setup_start = 260, + .setup_stop = 260, + .setup_data = 50, .sda_rise = 50, .sda_fall = 50, .scl_rise = 50, .scl_fall = 50, .hold_data = 300, - .buf = 20000, - .thigh_max = 5000, - .timeout = 106500 + .buf = 500, + .thigh_max = 50000, + .timeout = 35000000 } }; |