summaryrefslogtreecommitdiff
path: root/Documentation/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/acpi')
-rw-r--r--Documentation/acpi/apei/einj.txt177
1 files changed, 0 insertions, 177 deletions
diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt
deleted file mode 100644
index e550c8b98139..000000000000
--- a/Documentation/acpi/apei/einj.txt
+++ /dev/null
@@ -1,177 +0,0 @@
- APEI Error INJection
- ~~~~~~~~~~~~~~~~~~~~
-
-EINJ provides a hardware error injection mechanism. It is very useful
-for debugging and testing APEI and RAS features in general.
-
-You need to check whether your BIOS supports EINJ first. For that, look
-for early boot messages similar to this one:
-
-ACPI: EINJ 0x000000007370A000 000150 (v01 INTEL 00000001 INTL 00000001)
-
-which shows that the BIOS is exposing an EINJ table - it is the
-mechanism through which the injection is done.
-
-Alternatively, look in /sys/firmware/acpi/tables for an "EINJ" file,
-which is a different representation of the same thing.
-
-It doesn't necessarily mean that EINJ is not supported if those above
-don't exist: before you give up, go into BIOS setup to see if the BIOS
-has an option to enable error injection. Look for something called WHEA
-or similar. Often, you need to enable an ACPI5 support option prior, in
-order to see the APEI,EINJ,... functionality supported and exposed by
-the BIOS menu.
-
-To use EINJ, make sure the following are options enabled in your kernel
-configuration:
-
-CONFIG_DEBUG_FS
-CONFIG_ACPI_APEI
-CONFIG_ACPI_APEI_EINJ
-
-The EINJ user interface is in <debugfs mount point>/apei/einj.
-
-The following files belong to it:
-
-- available_error_type
-
- This file shows which error types are supported:
-
- Error Type Value Error Description
- ================ =================
- 0x00000001 Processor Correctable
- 0x00000002 Processor Uncorrectable non-fatal
- 0x00000004 Processor Uncorrectable fatal
- 0x00000008 Memory Correctable
- 0x00000010 Memory Uncorrectable non-fatal
- 0x00000020 Memory Uncorrectable fatal
- 0x00000040 PCI Express Correctable
- 0x00000080 PCI Express Uncorrectable fatal
- 0x00000100 PCI Express Uncorrectable non-fatal
- 0x00000200 Platform Correctable
- 0x00000400 Platform Uncorrectable non-fatal
- 0x00000800 Platform Uncorrectable fatal
-
- The format of the file contents are as above, except present are only
- the available error types.
-
-- error_type
-
- Set the value of the error type being injected. Possible error types
- are defined in the file available_error_type above.
-
-- error_inject
-
- Write any integer to this file to trigger the error injection. Make
- sure you have specified all necessary error parameters, i.e. this
- write should be the last step when injecting errors.
-
-- flags
-
- Present for kernel versions 3.13 and above. Used to specify which
- of param{1..4} are valid and should be used by the firmware during
- injection. Value is a bitmask as specified in ACPI5.0 spec for the
- SET_ERROR_TYPE_WITH_ADDRESS data structure:
-
- Bit 0 - Processor APIC field valid (see param3 below).
- Bit 1 - Memory address and mask valid (param1 and param2).
- Bit 2 - PCIe (seg,bus,dev,fn) valid (see param4 below).
-
- If set to zero, legacy behavior is mimicked where the type of
- injection specifies just one bit set, and param1 is multiplexed.
-
-- param1
-
- This file is used to set the first error parameter value. Its effect
- depends on the error type specified in error_type. For example, if
- error type is memory related type, the param1 should be a valid
- physical memory address. [Unless "flag" is set - see above]
-
-- param2
-
- Same use as param1 above. For example, if error type is of memory
- related type, then param2 should be a physical memory address mask.
- Linux requires page or narrower granularity, say, 0xfffffffffffff000.
-
-- param3
-
- Used when the 0x1 bit is set in "flags" to specify the APIC id
-
-- param4
- Used when the 0x4 bit is set in "flags" to specify target PCIe device
-
-- notrigger
-
- The error injection mechanism is a two-step process. First inject the
- error, then perform some actions to trigger it. Setting "notrigger"
- to 1 skips the trigger phase, which *may* allow the user to cause the
- error in some other context by a simple access to the CPU, memory
- location, or device that is the target of the error injection. Whether
- this actually works depends on what operations the BIOS actually
- includes in the trigger phase.
-
-BIOS versions based on the ACPI 4.0 specification have limited options
-in controlling where the errors are injected. Your BIOS may support an
-extension (enabled with the param_extension=1 module parameter, or boot
-command line einj.param_extension=1). This allows the address and mask
-for memory injections to be specified by the param1 and param2 files in
-apei/einj.
-
-BIOS versions based on the ACPI 5.0 specification have more control over
-the target of the injection. For processor-related errors (type 0x1, 0x2
-and 0x4), you can set flags to 0x3 (param3 for bit 0, and param1 and
-param2 for bit 1) so that you have more information added to the error
-signature being injected. The actual data passed is this:
-
- memory_address = param1;
- memory_address_range = param2;
- apicid = param3;
- pcie_sbdf = param4;
-
-For memory errors (type 0x8, 0x10 and 0x20) the address is set using
-param1 with a mask in param2 (0x0 is equivalent to all ones). For PCI
-express errors (type 0x40, 0x80 and 0x100) the segment, bus, device and
-function are specified using param1:
-
- 31 24 23 16 15 11 10 8 7 0
- +-------------------------------------------------+
- | segment | bus | device | function | reserved |
- +-------------------------------------------------+
-
-Anyway, you get the idea, if there's doubt just take a look at the code
-in drivers/acpi/apei/einj.c.
-
-An ACPI 5.0 BIOS may also allow vendor-specific errors to be injected.
-In this case a file named vendor will contain identifying information
-from the BIOS that hopefully will allow an application wishing to use
-the vendor-specific extension to tell that they are running on a BIOS
-that supports it. All vendor extensions have the 0x80000000 bit set in
-error_type. A file vendor_flags controls the interpretation of param1
-and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor
-documentation for details (and expect changes to this API if vendors
-creativity in using this feature expands beyond our expectations).
-
-
-An error injection example:
-
-# cd /sys/kernel/debug/apei/einj
-# cat available_error_type # See which errors can be injected
-0x00000002 Processor Uncorrectable non-fatal
-0x00000008 Memory Correctable
-0x00000010 Memory Uncorrectable non-fatal
-# echo 0x12345000 > param1 # Set memory address for injection
-# echo $((-1 << 12)) > param2 # Mask 0xfffffffffffff000 - anywhere in this page
-# echo 0x8 > error_type # Choose correctable memory error
-# echo 1 > error_inject # Inject now
-
-You should see something like this in dmesg:
-
-[22715.830801] EDAC sbridge MC3: HANDLING MCE MEMORY ERROR
-[22715.834759] EDAC sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090
-[22715.834759] EDAC sbridge MC3: TSC 0
-[22715.834759] EDAC sbridge MC3: ADDR 12345000 EDAC sbridge MC3: MISC 144780c86
-[22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0
-[22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0)
-
-For more information about EINJ, please refer to ACPI specification
-version 4.0, section 17.5 and ACPI 5.0, section 18.6.