diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt | 72 |
1 files changed, 70 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index ac63ae4a3861..8a6d3e1ee306 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -20,6 +20,10 @@ Required properties: - reset-names: Must include the following entries: - host1x +Each host1x client module having to perform DMA through the Memory Controller +should have the interconnect endpoints set to the Memory Client and External +Memory respectively. + The host1x top-level node defines a number of children, each representing one of the following host1x client modules: @@ -36,6 +40,12 @@ of the following host1x client modules: - reset-names: Must include the following entries: - mpe + Optional properties: + - interconnects: Must contain entry for the MPE memory clients. + - interconnect-names: Must include name of the interconnect path for each + interconnect entry. Consult TRM documentation for information about + available memory clients, see MEMORY CONTROLLER section. + - vi: video input Required properties: @@ -101,8 +111,8 @@ of the following host1x client modules: endpoint (required node) Required properties: - - data-lanes: an array of data lane from 1 to 4. Valid array - lengths are 1/2/4. + - data-lanes: an array of data lane from 1 to 8. Valid array + lengths are 1/2/4/8. - remote-endpoint: phandle to sensor 'endpoint' node. port@1 (required node) @@ -113,6 +123,12 @@ of the following host1x client modules: Required properties: - remote-endpoint: phandle to vi port 'endpoint' node. + Optional properties: + - interconnects: Must contain entry for the VI memory clients. + - interconnect-names: Must include name of the interconnect path for each + interconnect entry. Consult TRM documentation for information about + available memory clients, see MEMORY CONTROLLER section. + - epp: encoder pre-processor Required properties: @@ -126,6 +142,12 @@ of the following host1x client modules: - reset-names: Must include the following entries: - epp + Optional properties: + - interconnects: Must contain entry for the EPP memory clients. + - interconnect-names: Must include name of the interconnect path for each + interconnect entry. Consult TRM documentation for information about + available memory clients, see MEMORY CONTROLLER section. + - isp: image signal processor Required properties: @@ -139,6 +161,12 @@ of the following host1x client modules: - reset-names: Must include the following entries: - isp + Optional properties: + - interconnects: Must contain entry for the ISP memory clients. + - interconnect-names: Must include name of the interconnect path for each + interconnect entry. Consult TRM documentation for information about + available memory clients, see MEMORY CONTROLLER section. + - gr2d: 2D graphics engine Required properties: @@ -152,6 +180,12 @@ of the following host1x client modules: - reset-names: Must include the following entries: - 2d + Optional properties: + - interconnects: Must contain entry for the GR2D memory clients. + - interconnect-names: Must include name of the interconnect path for each + interconnect entry. Consult TRM documentation for information about + available memory clients, see MEMORY CONTROLLER section. + - gr3d: 3D graphics engine Required properties: @@ -170,6 +204,12 @@ of the following host1x client modules: - 3d - 3d2 (Only required on SoCs with two 3D clocks) + Optional properties: + - interconnects: Must contain entry for the GR3D memory clients. + - interconnect-names: Must include name of the interconnect path for each + interconnect entry. Consult TRM documentation for information about + available memory clients, see MEMORY CONTROLLER section. + - dc: display controller Required properties: @@ -197,6 +237,10 @@ of the following host1x client modules: - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - nvidia,edid: supplies a binary EDID blob - nvidia,panel: phandle of a display panel + - interconnects: Must contain entry for the DC memory clients. + - interconnect-names: Must include name of the interconnect path for each + interconnect entry. Consult TRM documentation for information about + available memory clients, see MEMORY CONTROLLER section. - hdmi: High Definition Multimedia Interface @@ -345,6 +389,12 @@ of the following host1x client modules: - reset-names: Must include the following entries: - vic + Optional properties: + - interconnects: Must contain entry for the VIC memory clients. + - interconnect-names: Must include name of the interconnect path for each + interconnect entry. Consult TRM documentation for information about + available memory clients, see MEMORY CONTROLLER section. + Example: / { @@ -498,6 +548,15 @@ Example: resets = <&tegra_car 27>; reset-names = "dc"; + interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>, + <&mc TEGRA20_MC_DISPLAY0B &emc>, + <&mc TEGRA20_MC_DISPLAY0C &emc>, + <&mc TEGRA20_MC_DISPLAYHC &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor"; + rgb { status = "disabled"; }; @@ -513,6 +572,15 @@ Example: resets = <&tegra_car 26>; reset-names = "dc"; + interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>, + <&mc TEGRA20_MC_DISPLAY0BB &emc>, + <&mc TEGRA20_MC_DISPLAY0CB &emc>, + <&mc TEGRA20_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor"; + rgb { status = "disabled"; }; |