summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt33
1 files changed, 0 insertions, 33 deletions
diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
deleted file mode 100644
index f3ab02b0dd41..000000000000
--- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Texas Instruments LMP91000 series of potentiostats
-
-LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
-LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
-
-Required properties:
-
- - compatible: should be one of the following:
- "ti,lmp91000"
- "ti,lmp91002"
- - reg: the I2C address of the device
- - io-channels: the phandle of the iio provider
-
- - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this
- needs to be set to signal that an external resistor value is being used.
-
-Optional properties:
-
- - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance
- amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms.
-
- - ti,rload-ohm: ohm value of the internal resistor load applied to the gas
- sensor. Must be 10, 33, 50, or 100 (default) ohms.
-
-Example:
-
-lmp91000@48 {
- compatible = "ti,lmp91000";
- reg = <0x48>;
- ti,tia-gain-ohm = <7500>;
- ti,rload = <100>;
- io-channels = <&adc>;
-};