diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml index fda0b45ee577..72987f0326a1 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml @@ -99,53 +99,53 @@ properties: The DQS trim values are only used on controllers which support HS400 timing. Only SDMMC4 on Tegra210 and Tegra186 supports HS400. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,default-trim: description: Specify the default outbound clock trimmer value. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,dqs-trim: description: Specify DQS trim value for HS400 timing. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-1v8: description: Specify drive strength calibration offsets for 1.8 V signaling modes. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-1v8-timeout: description: Specify drive strength used as a fallback in case the automatic calibration times out on a 1.8 V signaling mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-3v3: description: Specify drive strength calibration offsets for 3.3 V signaling modes. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-3v3-timeout: description: Specify drive strength used as a fallback in case the automatic calibration times out on a 3.3 V signaling mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-sdr104: description: Specify drive strength calibration offsets for SDR104 mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-down-offset-hs400: description: Specify drive strength calibration offsets for HS400 mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-1v8: description: Specify drive strength calibration offsets for 1.8 V signaling modes. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-1v8-timeout: description: Specify drive strength used as a fallback in case the automatic calibration times out on a 1.8 V signaling mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-3v3: description: Specify drive strength calibration offsets for 3.3 V @@ -157,25 +157,25 @@ properties: refer to the reference manual of the SoC for correct values. The SDR104 and HS400 timing specific values are used in corresponding modes if specified. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-3v3-timeout: description: Specify drive strength used as a fallback in case the automatic calibration times out on a 3.3 V signaling mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-sdr104: description: Specify drive strength calibration offsets for SDR104 mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,pad-autocal-pull-up-offset-hs400: description: Specify drive strength calibration offsets for HS400 mode. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,only-1-8v: description: The presence of this property indicates that the controller operates at a 1.8 V fixed I/O voltage. - $ref: "/schemas/types.yaml#/definitions/flag" + $ref: /schemas/types.yaml#/definitions/flag required: - compatible @@ -186,7 +186,7 @@ required: - reset-names allOf: - - $ref: "mmc-controller.yaml" + - $ref: mmc-controller.yaml - if: properties: compatible: |