summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/clock/idt,versaclock5.yaml2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mpc.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml1
-rw-r--r--Documentation/devicetree/bindings/input/input.yaml1
-rw-r--r--Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml1
-rw-r--r--Documentation/devicetree/bindings/leds/leds-bcm6328.txt4
-rw-r--r--Documentation/devicetree/bindings/leds/leds-bcm6358.txt2
-rw-r--r--Documentation/devicetree/bindings/media/renesas,drif.yaml20
-rw-r--r--Documentation/devicetree/bindings/net/qcom,ipa.yaml1
-rw-r--r--Documentation/devicetree/bindings/net/renesas,ether.yaml2
-rw-r--r--Documentation/devicetree/bindings/nvmem/mtk-efuse.txt1
-rw-r--r--Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml2
-rw-r--r--Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml2
-rw-r--r--Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-mux.yaml2
15 files changed, 22 insertions, 28 deletions
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index c268debe5b8d..28675b0b80f1 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -60,7 +60,6 @@ properties:
maxItems: 2
idt,xtal-load-femtofarads:
- $ref: /schemas/types.yaml#/definitions/uint32
minimum: 9000
maximum: 22760
description: Optional load capacitor for XTAL1 and XTAL2
@@ -84,7 +83,6 @@ patternProperties:
enum: [ 1800000, 2500000, 3300000 ]
idt,slew-percent:
description: The Slew rate control for CMOS single-ended.
- $ref: /schemas/types.yaml#/definitions/uint32
enum: [ 80, 85, 90, 100 ]
required:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
index 7b553d559c83..98c6fcf7bf26 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -46,6 +46,13 @@ properties:
description: |
I2C bus timeout in microseconds
+ fsl,i2c-erratum-a004447:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Indicates the presence of QorIQ erratum A-004447, which
+ says that the standard i2c recovery scheme mechanism does
+ not work and an alternate implementation is needed.
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 6f2398cdc82d..1e7894e524f9 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -102,7 +102,6 @@ patternProperties:
st,adc-channel-names:
description: List of single-ended channel names.
- $ref: /schemas/types.yaml#/definitions/string-array
st,filter-order:
description: |
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
index 74244d21d2b3..d41d8743aad4 100644
--- a/Documentation/devicetree/bindings/input/input.yaml
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -38,6 +38,5 @@ properties:
Duration in seconds which the key should be kept pressed for device to
reset automatically. Device with key pressed reset feature can specify
this property.
- $ref: /schemas/types.yaml#/definitions/uint32
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index cb6498108b78..36c955965d90 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -92,7 +92,6 @@ properties:
this interconnect to send RPMh commands.
qcom,bcm-voter-names:
- $ref: /schemas/types.yaml#/definitions/string-array
description: |
Names for each of the qcom,bcm-voters specified.
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
index ccebce597f37..a555d94084b7 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
@@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
However, on some devices there are Serial LEDs (LEDs connected to a 74x164
controller), which can either be controlled by software (exporting the 74x164
-as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
-by hardware using this driver.
+as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
+or by hardware using this driver.
Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
controlled, so the only chance to keep them working is by using this driver.
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
index da5708e7b43b..6e51c6b91ee5 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller
This controller is present on BCM6358 and BCM6368.
In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
which can either be controlled by software (exporting the 74x164 as spi-gpio.
-See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
+See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or
by hardware using this driver.
Required properties:
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index f1bdaeab4053..ce505a7c006a 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -99,32 +99,26 @@ properties:
Indicates that the channel acts as primary among the bonded channels.
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
description:
- Child port node corresponding to the data input, in accordance with the
- video interface bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
- The port node must contain at least one endpoint.
+ Child port node corresponding to the data input. The port node must
+ contain at least one endpoint.
properties:
endpoint:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
properties:
- remote-endpoint:
- description:
- A phandle to the remote tuner endpoint subnode in remote node
- port.
-
sync-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
description:
Indicates sync signal polarity, 0/1 for low/high respectively.
This property maps to SYNCAC bit in the hardware manual. The
default is 1 (active high).
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 7443490d4cc6..5fe6d3dceb08 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -105,7 +105,6 @@ properties:
- description: Whether the IPA clock is enabled (if valid)
qcom,smem-state-names:
- $ref: /schemas/types.yaml#/definitions/string-array
description: The names of the state bits used for SMP2P output
items:
- const: ipa-clock-enabled-valid
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
index 8ce5ed8a58dd..c101a1ec846e 100644
--- a/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -10,7 +10,7 @@ allOf:
- $ref: ethernet-controller.yaml#
maintainers:
- - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+ - Sergei Shtylyov <sergei.shtylyov@gmail.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
index d479ad977e24..b6791702bcfc 100644
--- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
@@ -9,7 +9,6 @@ Required properties:
"mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173
"mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
"mediatek,mt8516-efuse", "mediatek,efuse": for MT8516
- "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
- reg: Should contain registers location and length
= Data cells =
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index 01dcd14e7b2a..320a232c7208 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -118,7 +118,7 @@ patternProperties:
description:
Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
EXTERNAL_SSC or INTERNAL_SSC.
- Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used.
+ Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
default: 0
diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
index db1aa238cda5..b62c2431f94e 100644
--- a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
@@ -20,7 +20,7 @@ properties:
maxItems: 1
phys:
- $ref: /schemas/types.yaml#/definitions/phandle
+ maxItems: 1
description: phandle to the USB phy
monitored-battery:
diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
index b4c190bddd84..61802a11baf4 100644
--- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
@@ -49,7 +49,7 @@ properties:
maxItems: 1
memory-region:
- $ref: /schemas/types.yaml#/definitions/phandle
+ maxItems: 1
description:
phandle to a node describing reserved memory (System RAM memory)
The M core can't access all the DDR memory space on some platform,
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
index d09c6355e22d..51c7622dc20b 100644
--- a/Documentation/devicetree/bindings/spi/spi-mux.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -72,7 +72,7 @@ examples:
mux-controls = <&mux>;
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;