diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
164 files changed, 3476 insertions, 1854 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 3341788d1096..5f6769bf45bd 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -151,6 +151,7 @@ properties: - description: Boards with the Amlogic Meson G12B S922X SoC items: - enum: + - azw,gsking-x - azw,gtking - azw,gtking-pro - hardkernel,odroid-n2 @@ -163,9 +164,10 @@ properties: - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC items: - enum: - - seirobotics,sei610 - - khadas,vim3l - hardkernel,odroid-c4 + - hardkernel,odroid-hc4 + - khadas,vim3l + - seirobotics,sei610 - const: amlogic,sm1 - description: Boards with the Amlogic Meson A1 A113L SoC diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml new file mode 100644 index 000000000000..eee7cda9f91b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson8/Meson8b/Meson8m2 SECBUS2 register interface + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +description: | + The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which + contains registers for various IP blocks such as pin-controller bits for + the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits. + The registers can be accessed directly when not running in "secure mode". + When "secure mode" is enabled then these registers have to be accessed + through secure monitor calls. + +properties: + compatible: + items: + - enum: + - amlogic,meson8-secbus2 + - amlogic,meson8b-secbus2 + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + secbus2: system-controller@4000 { + compatible = "amlogic,meson8-secbus2", "syscon"; + reg = <0x4000 0x2000>; + }; diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index b5ce5b39bb9c..667d58e0a659 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -31,6 +31,14 @@ Optional properties: - mbox-names: shall be "tx" or "rx" depending on mboxes entries. +- interrupts : when using smc or hvc transports, this optional + property indicates that msg completion by the platform is indicated + by an interrupt rather than by the return of the smc call. This + should not be used except when the platform requires such behavior. + +- interrupt-names : if "interrupts" is present, interrupt-names must also + be present and have the value "a2p". + See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details about the generic mailbox controller and client driver bindings. diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index 62cd4e89817c..67719f15eb4c 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -1,7 +1,7 @@ Atmel system registers Chipid required properties: -- compatible: Should be "atmel,sama5d2-chipid" +- compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid" - reg : Should contain registers location and length PIT Timer required properties: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml index 5fec063d9a13..e55731f43c84 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml @@ -19,6 +19,8 @@ properties: oneOf: - description: BCM4906 based boards items: + - enum: + - netgear,r8000p - const: brcm,bcm4906 - const: brcm,bcm4908 diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 14cd727d3c4b..26b886b20b27 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -169,6 +169,7 @@ properties: - qcom,kryo385 - qcom,kryo468 - qcom,kryo485 + - qcom,kryo685 - qcom,scorpion enable-method: @@ -232,7 +233,6 @@ properties: by this cpu (see ./idle-states.yaml). capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' description: u32 value representing CPU capacity (see ./cpu-capacity.txt) in DMIPS/MHz, relative to highest capacity-dmips-mhz diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 34000f7fbe02..297c87f45db8 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -210,6 +210,7 @@ properties: - kiebackpeter,imx6q-tpc # K+P i.MX6 Quad TPC Board - kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module - kosagi,imx6q-novena # Kosagi Novena Dual/Quad + - kvg,vicut1q # Kverneland UT1Q board - logicpd,imx6q-logicpd - lwn,display5 # Liebherr Display5 i.MX6 Quad Board - lwn,mccmon6 # Liebherr Monitor6 i.MX6 Quad Board @@ -331,6 +332,7 @@ properties: - fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board - karo,imx6qp-tx6qp # Ka-Ro electronics TX6QP-8037 Module + - kvg,vicutp # Kverneland UT1P board - prt,prtwd3 # Protonic WD3 board - wand,imx6qp-wandboard # Wandboard i.MX6 QuadPlus Board - zii,imx6qp-zii-rdu2 # ZII RDU2+ Board @@ -364,7 +366,12 @@ properties: - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board - karo,imx6dl-tx6dl # Ka-Ro electronics TX6U Modules - kontron,imx6dl-samx6i # Kontron i.MX6 Solo SMARC Module + - kvg,victgo # Kverneland TGO + - kvg,vicut1 # Kverneland UT1 board + - ply,plybas # Plymovent BAS board + - ply,plym2m # Plymovent M2M board - poslab,imx6dl-savageboard # Poslab SavageBoard Dual + - prt,prtmvt # Protonic MVT board - prt,prtrvt # Protonic RVT board - prt,prtvt7 # Protonic VT7 board - rex,imx6dl-rex-basic # Rex Basic i.MX6 Dual Lite Board @@ -488,6 +495,7 @@ properties: - karo,imx6ul-tx6ul # Ka-Ro electronics TXUL-0010 Module - kontron,imx6ul-n6310-som # Kontron N6310 SOM - kontron,imx6ul-n6311-som # Kontron N6311 SOM + - prt,prti6g # Protonic PRTI6G Board - technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf - technexion,imx6ul-pico-hobbit # TechNexion i.MX6UL Pico-Hobbit - technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi @@ -670,8 +678,12 @@ properties: items: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit + - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board + - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit + - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit + - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM - variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module - const: fsl,imx8mm @@ -691,6 +703,7 @@ properties: - description: i.MX8MN based Boards items: - enum: + - beacon,imx8mn-beacon-kit # i.MX8MN Beacon Development Kit - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - const: fsl,imx8mn @@ -707,6 +720,12 @@ properties: - fsl,imx8mp-evk # i.MX8MP EVK Board - const: fsl,imx8mp + - description: PHYTEC phyCORE-i.MX8MP SoM based boards + items: + - const: phytec,imx8mp-phyboard-pollux-rdk # phyBOARD-Pollux RDK + - const: phytec,imx8mp-phycore-som # phyCORE-i.MX8MP SoM + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -724,6 +743,7 @@ properties: - enum: - purism,librem5r2 # Purism Librem5 phone "Chestnut" - purism,librem5r3 # Purism Librem5 phone "Dogwood" + - purism,librem5r4 # Purism Librem5 phone "Evergreen" - const: purism,librem5 - const: fsl,imx8mq @@ -834,10 +854,12 @@ properties: Kontron SMARC-sAL28 board on the SMARC Eval Carrier 2.0 items: - enum: + - kontron,sl28-var1-ads2 - kontron,sl28-var2-ads2 - kontron,sl28-var3-ads2 - kontron,sl28-var4-ads2 - enum: + - kontron,sl28-var1 - kontron,sl28-var2 - kontron,sl28-var3 - kontron,sl28-var4 @@ -848,6 +870,7 @@ properties: Kontron SMARC-sAL28 board (on a generic/undefined carrier) items: - enum: + - kontron,sl28-var1 - kontron,sl28-var2 - kontron,sl28-var3 - kontron,sl28-var4 diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 53f0d4e3ea98..93b3bdf6eaeb 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -120,7 +120,9 @@ properties: - const: mediatek,mt8183 - description: Google Krane (Lenovo IdeaPad Duet, 10e,...) items: - - const: google,krane-sku176 + - enum: + - google,krane-sku0 + - google,krane-sku176 - const: google,krane - const: mediatek,mt8183 diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml index 0a9889debc7c..c299dc907f6c 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -24,6 +24,7 @@ properties: - qcom,sc7180-llcc - qcom,sdm845-llcc - qcom,sm8150-llcc + - qcom,sm8250-llcc reg: items: diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index c97d4a580f47..174134f920e1 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -40,7 +40,9 @@ description: | sdm630 sdm660 sdm845 + sdx55 sm8250 + sm8350 The 'board' element must be one of the following strings: @@ -169,6 +171,11 @@ properties: - items: - enum: + - qcom,sdx55-mtp + - const: qcom,sdx55 + + - items: + - enum: - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 @@ -178,6 +185,11 @@ properties: - qcom,sm8250-mtp - const: qcom,sm8250 + - items: + - enum: + - qcom,sm8350-mtp + - const: qcom,sm8350 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index fe11be65039a..5fd0696a9f91 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -130,6 +130,7 @@ properties: - description: RZ/G2N (R8A774B1) items: - enum: + - beacon,beacon-rzg2n # Beacon EmbeddedWorks RZ/G2N Kit - hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform - const: renesas,r8a774b1 @@ -154,6 +155,7 @@ properties: - description: RZ/G2H (R8A774E1) items: - enum: + - beacon,beacon-rzg2h # Beacon EmbeddedWorks RZ/G2H Kit - hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform - const: renesas,r8a774e1 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index ef4544ad6f82..8a2dd9f1cff2 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -467,6 +467,11 @@ properties: - const: radxa,rockpi4 - const: rockchip,rk3399 + - description: Radxa ROCK Pi E + items: + - const: radxa,rockpi-e + - const: rockchip,rk3328 + - description: Radxa ROCK Pi N8 items: - const: radxa,rockpi-n8 diff --git a/Documentation/devicetree/bindings/arm/sirf.yaml b/Documentation/devicetree/bindings/arm/sirf.yaml deleted file mode 100644 index b25eb35d1b66..000000000000 --- a/Documentation/devicetree/bindings/arm/sirf.yaml +++ /dev/null @@ -1,30 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/sirf.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: CSR SiRFprimaII and SiRFmarco device tree bindings. - -maintainers: - - Binghua Duan <binghua.duan@csr.com> - - Barry Song <Baohua.Song@csr.com> - -properties: - $nodename: - const: '/' - compatible: - oneOf: - - items: - - const: sirf,atlas6-cb - - const: sirf,atlas6 - - items: - - const: sirf,atlas7-cb - - const: sirf,atlas7 - - items: - - const: sirf,prima2-cb - - const: sirf,prima2 - -additionalProperties: true - -... diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt deleted file mode 100644 index d11d80006a19..000000000000 --- a/Documentation/devicetree/bindings/arm/ste-u300.txt +++ /dev/null @@ -1,46 +0,0 @@ -ST-Ericsson U300 Device Tree Bindings - -For various board the "board" node may contain specific properties -that pertain to this particular board, such as board-specific GPIOs -or board power regulator supplies. - -Required root node property: - -compatible="stericsson,u300"; - -Required node: syscon -This contains the system controller. -- compatible: must be "stericsson,u300-syscon". -- reg: the base address and size of the system controller. - -Boards with the U300 SoC include: - -S365 "Small Board U365": - -Required node: s365 -This contains the board-specific information. -- compatible: must be "stericsson,s365". -- vana15-supply: the regulator supplying the 1.5V to drive the - board. -- syscon: a pointer to the syscon node so we can access the - syscon registers to set the board as self-powered. - -Example: - -/ { - model = "ST-Ericsson U300"; - compatible = "stericsson,u300"; - #address-cells = <1>; - #size-cells = <1>; - - s365 { - compatible = "stericsson,s365"; - vana15-supply = <&ab3100_ldo_d_reg>; - syscon = <&syscon>; - }; - - syscon: syscon@c0011000 { - compatible = "stericsson,u300-syscon"; - reg = <0xc0011000 0x1000>; - }; -}; diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 6db32fbf813f..08607c7ec1bf 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -657,7 +657,8 @@ properties: - description: Pine64 PineCube items: - const: pine64,pinecube - - const: allwinner,sun8i-s3 + - const: sochip,s3 + - const: allwinner,sun8i-v3 - description: Pine64 PineH64 model A items: @@ -683,23 +684,31 @@ properties: - description: Pine64 PinePhone Developer Batch (1.0) items: - const: pine64,pinephone-1.0 + - const: pine64,pinephone - const: allwinner,sun50i-a64 - description: Pine64 PinePhone Braveheart (1.1) items: - const: pine64,pinephone-1.1 + - const: pine64,pinephone - const: allwinner,sun50i-a64 - description: Pine64 PinePhone (1.2) items: - const: pine64,pinephone-1.2 + - const: pine64,pinephone - const: allwinner,sun50i-a64 - - description: Pine64 PineTab + - description: Pine64 PineTab, Development Sample items: - const: pine64,pinetab - const: allwinner,sun50i-a64 + - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones) + items: + - const: pine64,pinetab-early-adopter + - const: allwinner,sun50i-a64 + - description: Pine64 SoPine Baseboard items: - const: pine64,sopine-baseboard @@ -777,6 +786,12 @@ properties: - const: sinlinx,sina33 - const: allwinner,sun8i-a33 + - description: SL631 Action Camera with IMX179 + items: + - const: allwinner,sl631-imx179 + - const: allwinner,sl631 + - const: allwinner,sun8i-v3 + - description: Tanix TX6 items: - const: oranth,tanix-tx6 diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index c5fbf869aa93..b9f75e20fef5 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -120,10 +120,18 @@ properties: items: - const: nvidia,p3668-0000 - const: nvidia,tegra194 + - description: Jetson Xavier NX (eMMC) + items: + - const: nvidia,p3668-0001 + - const: nvidia,tegra194 - description: Jetson Xavier NX Developer Kit items: - const: nvidia,p3509-0000+p3668-0000 - const: nvidia,tegra194 + - description: Jetson Xavier NX Developer Kit (eMMC) + items: + - const: nvidia,p3509-0000+p3668-0001 + - const: nvidia,tegra194 - items: - enum: - nvidia,tegra234-vdk diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml index e0c6787f6e94..f52c7e8ce654 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -22,6 +22,9 @@ properties: - adapteva,parallella - digilent,zynq-zybo - digilent,zynq-zybo-z7 + - ebang,ebaz4205 + - myir,zynq-zturn-v5 + - myir,zynq-zturn - xlnx,zynq-cc108 - xlnx,zynq-zc702 - xlnx,zynq-zc706 @@ -91,6 +94,7 @@ properties: items: - enum: - xlnx,zynqmp-zcu104-revA + - xlnx,zynqmp-zcu104-revC - xlnx,zynqmp-zcu104-rev1.0 - const: xlnx,zynqmp-zcu104 - const: xlnx,zynqmp @@ -107,7 +111,7 @@ properties: items: - enum: - xlnx,zynqmp-zcu111-revA - - xlnx,zynqmp-zcu11-rev1.0 + - xlnx,zynqmp-zcu111-rev1.0 - const: xlnx,zynqmp-zcu111 - const: xlnx,zynqmp diff --git a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt deleted file mode 100644 index 7e66b7f7ba96..000000000000 --- a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt +++ /dev/null @@ -1,30 +0,0 @@ -ZTE sysctrl Registers - -Registers for 'zte,zx296702' SoC: - -System management required properties: - - compatible = "zte,sysctrl" - -Low power management required properties: - - compatible = "zte,zx296702-pcu" - -Bus matrix required properties: - - compatible = "zte,zx-bus-matrix" - - -Registers for 'zte,zx296718' SoC: - -System management required properties: - - compatible = "zte,zx296718-aon-sysctrl" - - compatible = "zte,zx296718-sysctrl" - -Example: -aon_sysctrl: aon-sysctrl@116000 { - compatible = "zte,zx296718-aon-sysctrl", "syscon"; - reg = <0x116000 0x1000>; -}; - -sysctrl: sysctrl@1463000 { - compatible = "zte,zx296718-sysctrl", "syscon"; - reg = <0x1463000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml deleted file mode 100644 index 672f8129cd31..000000000000 --- a/Documentation/devicetree/bindings/arm/zte.yaml +++ /dev/null @@ -1,28 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/zte.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: ZTE platforms device tree bindings - -maintainers: - - Jun Nie <jun.nie@linaro.org> - -properties: - $nodename: - const: '/' - compatible: - oneOf: - - items: - - enum: - - zte,zx296702-ad1 - - const: zte,zx296702 - - items: - - enum: - - zte,zx296718-evb - - const: zte,zx296718 - -additionalProperties: true - -... diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index 32d33b983d66..3d719f468a5b 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -21,7 +21,9 @@ properties: oneOf: - const: allwinner,sun8i-a23-rsb - items: - - const: allwinner,sun8i-a83t-rsb + - enum: + - allwinner,sun8i-a83t-rsb + - allwinner,sun50i-h616-rsb - const: allwinner,sun8i-a23-rsb reg: diff --git a/Documentation/devicetree/bindings/c6x/clocks.txt b/Documentation/devicetree/bindings/c6x/clocks.txt deleted file mode 100644 index a04f5fd30122..000000000000 --- a/Documentation/devicetree/bindings/c6x/clocks.txt +++ /dev/null @@ -1,40 +0,0 @@ -C6X PLL Clock Controllers -------------------------- - -This is a first-cut support for the SoC clock controllers. This is still -under development and will probably change as the common device tree -clock support is added to the kernel. - -Required properties: - -- compatible: "ti,c64x+pll" - May also have SoC-specific value to support SoC-specific initialization - in the driver. One of: - "ti,c6455-pll" - "ti,c6457-pll" - "ti,c6472-pll" - "ti,c6474-pll" - -- reg: base address and size of register area -- clock-frequency: input clock frequency in hz - - -Optional properties: - -- ti,c64x+pll-bypass-delay: CPU cycles to delay when entering bypass mode - -- ti,c64x+pll-reset-delay: CPU cycles to delay after PLL reset - -- ti,c64x+pll-lock-delay: CPU cycles to delay after PLL frequency change - -Example: - - clock-controller@29a0000 { - compatible = "ti,c6472-pll", "ti,c64x+pll"; - reg = <0x029a0000 0x200>; - clock-frequency = <25000000>; - - ti,c64x+pll-bypass-delay = <200>; - ti,c64x+pll-reset-delay = <12000>; - ti,c64x+pll-lock-delay = <80000>; - }; diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt deleted file mode 100644 index 92672235de57..000000000000 --- a/Documentation/devicetree/bindings/c6x/dscr.txt +++ /dev/null @@ -1,127 +0,0 @@ -Device State Configuration Registers ------------------------------------- - -TI C6X SoCs contain a region of miscellaneous registers which provide various -function for SoC control or status. Details vary considerably among from SoC -to SoC with no two being alike. - -In general, the Device State Configuration Registers (DSCR) will provide one or -more configuration registers often protected by a lock register where one or -more key values must be written to a lock register in order to unlock the -configuration register for writes. These configuration register may be used to -enable (and disable in some cases) SoC pin drivers, select peripheral clock -sources (internal or pin), etc. In some cases, a configuration register is -write once or the individual bits are write once. In addition to device config, -the DSCR block may provide registers which are used to reset peripherals, -provide device ID information, provide ethernet MAC addresses, as well as other -miscellaneous functions. - -For device state control (enable/disable), each device control is assigned an -id which is used by individual device drivers to control the state as needed. - -Required properties: - -- compatible: must be "ti,c64x+dscr" -- reg: register area base and size - -Optional properties: - - NOTE: These are optional in that not all SoCs will have all properties. For - SoCs which do support a given property, leaving the property out of the - device tree will result in reduced functionality or possibly driver - failure. - -- ti,dscr-devstat - offset of the devstat register - -- ti,dscr-silicon-rev - offset, start bit, and bitsize of silicon revision field - -- ti,dscr-rmii-resets - offset and bitmask of RMII reset field. May have multiple tuples if more - than one ethernet port is available. - -- ti,dscr-locked-regs - possibly multiple tuples describing registers which are write protected by - a lock register. Each tuple consists of the register offset, lock register - offsset, and the key value used to unlock the register. - -- ti,dscr-kick-regs - offset and key values of two "kick" registers used to write protect other - registers in DSCR. On SoCs using kick registers, the first key must be - written to the first kick register and the second key must be written to - the second register before other registers in the area are write-enabled. - -- ti,dscr-mac-fuse-regs - MAC addresses are contained in two registers. Each element of a MAC address - is contained in a single byte. This property has two tuples. Each tuple has - a register offset and four cells representing bytes in the register from - most significant to least. The value of these four cells is the MAC byte - index (1-6) of the byte within the register. A value of 0 means the byte - is unused in the MAC address. - -- ti,dscr-devstate-ctl-regs - This property describes the bitfields used to control the state of devices. - Each tuple describes a range of identical bitfields used to control one or - more devices (one bitfield per device). The layout of each tuple is: - - start_id num_ids reg enable disable start_bit nbits - - Where: - start_id is device id for the first device control in the range - num_ids is the number of device controls in the range - reg is the offset of the register holding the control bits - enable is the value to enable a device - disable is the value to disable a device (0xffffffff if cannot disable) - start_bit is the bit number of the first bit in the range - nbits is the number of bits per device control - -- ti,dscr-devstate-stat-regs - This property describes the bitfields used to provide device state status - for device states controlled by the DSCR. Each tuple describes a range of - identical bitfields used to provide status for one or more devices (one - bitfield per device). The layout of each tuple is: - - start_id num_ids reg enable disable start_bit nbits - - Where: - start_id is device id for the first device status in the range - num_ids is the number of devices covered by the range - reg is the offset of the register holding the status bits - enable is the value indicating device is enabled - disable is the value indicating device is disabled - start_bit is the bit number of the first bit in the range - nbits is the number of bits per device status - -- ti,dscr-privperm - Offset and default value for register used to set access privilege for - some SoC devices. - - -Example: - - device-state-config-regs@2a80000 { - compatible = "ti,c64x+dscr"; - reg = <0x02a80000 0x41000>; - - ti,dscr-devstat = <0>; - ti,dscr-silicon-rev = <8 28 0xf>; - ti,dscr-rmii-resets = <0x40020 0x00040000>; - - ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>; - ti,dscr-devstate-ctl-regs = - <0 12 0x40008 1 0 0 2 - 12 1 0x40008 3 0 30 2 - 13 2 0x4002c 1 0xffffffff 0 1>; - ti,dscr-devstate-stat-regs = - <0 10 0x40014 1 0 0 3 - 10 2 0x40018 1 0 0 3>; - - ti,dscr-mac-fuse-regs = <0x700 1 2 3 4 - 0x704 5 6 0 0>; - - ti,dscr-privperm = <0x41c 0xaaaaaaaa>; - - ti,dscr-kick-regs = <0x38 0x83E70B13 - 0x3c 0x95A4F1E0>; - }; diff --git a/Documentation/devicetree/bindings/c6x/emifa.txt b/Documentation/devicetree/bindings/c6x/emifa.txt deleted file mode 100644 index 0ff6e9b9a13f..000000000000 --- a/Documentation/devicetree/bindings/c6x/emifa.txt +++ /dev/null @@ -1,62 +0,0 @@ -External Memory Interface -------------------------- - -The emifa node describes a simple external bus controller found on some C6X -SoCs. This interface provides external busses with a number of chip selects. - -Required properties: - -- compatible: must be "ti,c64x+emifa", "simple-bus" -- reg: register area base and size -- #address-cells: must be 2 (chip-select + offset) -- #size-cells: must be 1 -- ranges: mapping from EMIFA space to parent space - - -Optional properties: - -- ti,dscr-dev-enable: Device ID if EMIF is enabled/disabled from DSCR - -- ti,emifa-burst-priority: - Number of memory transfers after which the EMIF will elevate the priority - of the oldest command in the command FIFO. Setting this field to 255 - disables this feature, thereby allowing old commands to stay in the FIFO - indefinitely. - -- ti,emifa-ce-config: - Configuration values for each of the supported chip selects. - -Example: - - emifa@70000000 { - compatible = "ti,c64x+emifa", "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0x70000000 0x100>; - ranges = <0x2 0x0 0xa0000000 0x00000008 - 0x3 0x0 0xb0000000 0x00400000 - 0x4 0x0 0xc0000000 0x10000000 - 0x5 0x0 0xD0000000 0x10000000>; - - ti,dscr-dev-enable = <13>; - ti,emifa-burst-priority = <255>; - ti,emifa-ce-config = <0x00240120 - 0x00240120 - 0x00240122 - 0x00240122>; - - flash@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x3 0x0 0x400000>; - bank-width = <1>; - device-width = <1>; - partition@0 { - reg = <0x0 0x400000>; - label = "NOR"; - }; - }; - }; - -This shows a flash chip attached to chip select 3. diff --git a/Documentation/devicetree/bindings/c6x/soc.txt b/Documentation/devicetree/bindings/c6x/soc.txt deleted file mode 100644 index b1e4973b5769..000000000000 --- a/Documentation/devicetree/bindings/c6x/soc.txt +++ /dev/null @@ -1,28 +0,0 @@ -C6X System-on-Chip ------------------- - -Required properties: - -- compatible: "simple-bus" -- #address-cells: must be 1 -- #size-cells: must be 1 -- ranges - -Optional properties: - -- model: specific SoC model - -- nodes for IP blocks within SoC - - -Example: - - soc { - compatible = "simple-bus"; - model = "tms320c6455"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - ... - }; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 4286ed767a0a..ce11b2027199 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -137,6 +137,18 @@ properties: maxItems: 7 $ref: /schemas/types.yaml#/definitions/uint32-array + sink-vdos: + description: An array of u32 with each entry, a Vendor Defined Message Object (VDO), + providing additional information corresponding to the product, the detailed bit + definitions and the order of each VDO can be found in + "USB Power Delivery Specification Revision 3.0, Version 2.0 + ECNs 2020-12-10" + chapter 6.4.4.3.1 Discover Identity. User can specify the VDO array via + VDO_IDH/_CERT/_PRODUCT/_UFP/_DFP/_PCABLE/_ACABLE(1/2)/_VPD() defined in + dt-bindings/usb/pd.h. + minItems: 3 + maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + op-sink-microwatt: description: Sink required operating power in microwatt, if source can't offer the power, Capability Mismatch is set. Required for power sink and diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt index 02c21b584741..3bc760cc31cb 100644 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt @@ -40,7 +40,7 @@ Optional properties: documents on how to describe the way the sii902x device is connected to the rest of the audio system: Documentation/devicetree/bindings/sound/simple-card.yaml - Documentation/devicetree/bindings/sound/audio-graph-card.txt + Documentation/devicetree/bindings/sound/audio-graph-card.yaml Note: In case of the audio-graph-card binding the used port index should be 3. diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt index 33977e15bebd..ed76332ec01e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -23,7 +23,7 @@ connected to. For a description of the display interface sink function blocks, see Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and -Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt. +Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml. Required properties (all function blocks): - compatible: "mediatek,<chip>-disp-<function>", one of @@ -61,7 +61,7 @@ Required properties (DMA function blocks): "mediatek,<chip>-disp-wdma" the supported chips are mt2701, mt8167 and mt8173. - larb: Should contain a phandle pointing to the local arbiter device as defined - in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml - iommus: Should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 27fffafe5b5c..3207608d1178 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -105,26 +105,27 @@ properties: - dlc,dlc1010gig # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel - edt,et035012dm6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel + - edt,et057090dhu + - edt,et070080dh6 # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch - edt,etm043080dh6gp # Emerging Display Technology Corp. 480x272 TFT Display - edt,etm0430g0dh6 - # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel - - edt,et057090dhu - # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - - edt,etm070080dh6 - # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - - edt,etm0700g0dh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same as ETM0700G0DH6 but with inverted pixel clock. - edt,etm070080bdh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same timings as the ETM0700G0DH6, but with resistive touch. + - edt,etm070080dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same display as the ETM0700G0BDH6, but with changed hardware for the # backlight and the touch interface. - edt,etm070080edh6 + - edt,etm0700g0bdh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - # Same timings as the ETM0700G0DH6, but with resistive touch. - - edt,etm070080dh6 + - edt,etm0700g0dh6 + - edt,etm0700g0edh6 # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel - evervision,vgg804821 # Foxlink Group 5" WVGA TFT LCD panel @@ -173,6 +174,8 @@ properties: - koe,tx26d202vm0bwa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel - koe,tx31d200vm0baa + # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT + - kyo,tcg070wvlq # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel - kyo,tcg121xglp # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml index b15f68c499cb..df29d59d13a8 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The Block Copy DMA (BCDMA) is intended to perform similar functions as the TR diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml index b13ab60cd740..ea19d12a9337 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/dma/ti/k3-pktdma.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K3 DMSS PKTDMA Device Tree Bindings maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The Packet DMA (PKTDMA) is intended to perform similar functions as the packet diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 9a87fd9041eb..6a09bbf83d46 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The UDMA-P is intended to perform similar (but significantly upgraded) diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml index 5fe784f487c5..efdf59abb2e1 100644 --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -85,7 +85,6 @@ properties: wlf,micd-timeout-ms: description: Timeout for microphone detection, specified in milliseconds. - $ref: "/schemas/types.yaml#/definitions/uint32" wlf,micd-force-micbias: description: diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 78456437df5f..a884955f861e 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -22,6 +22,8 @@ Required properties: * "qcom,scm-sc7180" * "qcom,scm-sdm845" * "qcom,scm-sm8150" + * "qcom,scm-sm8250" + * "qcom,scm-sm8350" and: * "qcom,scm" - clocks: Specifies clocks needed by the SCM interface, if any: diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml index 4db3b8a3332c..9cf6137dd524 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml @@ -82,8 +82,7 @@ properties: '#gpio-cells': const: 2 - gpio-ranges: - maxItems: 1 + gpio-ranges: true interrupts: true diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index eef614962b10..bf04151b63d2 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -49,7 +49,6 @@ properties: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0 diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml index 00a6511354e6..5d3ce641fcde 100644 --- a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml +++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml @@ -73,11 +73,9 @@ properties: description: | Temperature sensor trimming factor. It can be used to manually adjust the temperature measurements within 7.130 degrees Celsius. - maxItems: 1 - items: - default: 0 - minimum: 0 - maximum: 7130 + default: 0 + minimum: 0 + maximum: 7130 additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 8020d739a078..1502b22c77cc 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -52,7 +52,6 @@ properties: ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt - $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000 diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml index cc3aa2a5e70b..ff99344788ab 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -39,11 +39,9 @@ properties: i2c-gpio,delay-us: description: delay between GPIO operations (may depend on each platform) - $ref: /schemas/types.yaml#/definitions/uint32 i2c-gpio,timeout-ms: description: timeout to get data - $ref: /schemas/types.yaml#/definitions/uint32 # Deprecated properties, do not use in new device tree sources: gpios: diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml index c22b66b6219e..d9293c57f573 100644 --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml @@ -66,21 +66,18 @@ properties: default: 400000 i2c-sda-hold-time-ns: - maxItems: 1 description: | The property should contain the SDA hold time in nanoseconds. This option is only supported in hardware blocks version 1.11a or newer or on Microsemi SoCs. i2c-scl-falling-time-ns: - maxItems: 1 description: | The property should contain the SCL falling time in nanoseconds. This value is used to compute the tLOW period. default: 300 i2c-sda-falling-time-ns: - maxItems: 1 description: | The property should contain the SDA falling time in nanoseconds. This value is used to compute the tHIGH period. diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml index 6eef3480ea8f..c2efbb813ca2 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml @@ -16,8 +16,8 @@ description: properties: compatible: enum: - - bosch,bmc150 - - bosch,bmi055 + - bosch,bmc150_accel + - bosch,bmi055_accel - bosch,bma255 - bosch,bma250e - bosch,bma222 diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml index 5667d09dfe6a..fbb714431e3d 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml @@ -20,6 +20,9 @@ properties: reg: maxItems: 1 + vdd-supply: true + vddio-supply: true + mount-matrix: description: an optional 3x3 mounting rotation matrix. diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index e0cc3b2e8957..22b7ed3723f6 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -80,7 +80,7 @@ properties: type: boolean bipolar: - description: see Documentation/devicetree/bindings/iio/adc/adc.txt + description: see Documentation/devicetree/bindings/iio/adc/adc.yaml type: boolean required: diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml index 9475a9e6e920..95774a55629d 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml @@ -23,7 +23,6 @@ properties: maxItems: 1 shunt-resistor-micro-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: | Value in micro Ohms of the shunt resistor connected between the RS+ and RS- inputs, across which the current is measured. Value needed to compute diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 28417b31b558..517e32976c30 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -246,7 +246,6 @@ patternProperties: Resolution (bits) to use for conversions: - can be 6, 8, 10 or 12 on stm32f4 - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 - $ref: /schemas/types.yaml#/definitions/uint32 st,adc-channels: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml index 692dacd0fee5..7b895784e008 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml @@ -42,7 +42,6 @@ properties: const: 1 ti,channel0-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Channel 0 current in uA. enum: - 0 @@ -51,7 +50,6 @@ properties: - 20 ti,channel3-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Channel 3 current in uA. enum: - 0 diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml index 5ccbb1f81960..e759a5da708d 100644 --- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml @@ -46,10 +46,14 @@ description: | properties: compatible: - enum: - - x-powers,axp209-adc - - x-powers,axp221-adc - - x-powers,axp813-adc + oneOf: + - const: x-powers,axp209-adc + - const: x-powers,axp221-adc + - const: x-powers,axp813-adc + + - items: + - const: x-powers,axp803-adc + - const: x-powers,axp813-adc "#io-channel-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt index e0e0755cabd8..f42e18078376 100644 --- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt @@ -1,13 +1,22 @@ Xilinx XADC device driver -This binding document describes the bindings for both of them since the -bindings are very similar. The Xilinx XADC is a ADC that can be found in the -series 7 FPGAs from Xilinx. The XADC has a DRP interface for communication. -Currently two different frontends for the DRP interface exist. One that is only -available on the ZYNQ family as a hardmacro in the SoC portion of the ZYNQ. The -other one is available on all series 7 platforms and is a softmacro with a AXI -interface. This binding document describes the bindings for both of them since -the bindings are very similar. +This binding document describes the bindings for the Xilinx 7 Series XADC as well +as the UltraScale/UltraScale+ System Monitor. + +The Xilinx XADC is an ADC that can be found in the Series 7 FPGAs from Xilinx. +The XADC has a DRP interface for communication. Currently two different +frontends for the DRP interface exist. One that is only available on the ZYNQ +family as a hardmacro in the SoC portion of the ZYNQ. The other one is available +on all series 7 platforms and is a softmacro with a AXI interface. This binding +document describes the bindings for both of them since the bindings are very +similar. + +The Xilinx System Monitor is an ADC that is found in the UltraScale and +UltraScale+ FPGAs from Xilinx. The System Monitor provides a DRP interface for +communication. Xilinx provides a standard IP core that can be used to access the +System Monitor through an AXI interface in the FPGA fabric. This IP core is +called the Xilinx System Management Wizard. This document describes the bindings +for this IP. Required properties: - compatible: Should be one of @@ -15,11 +24,14 @@ Required properties: configuration interface to interface to the XADC hardmacro. * "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to interface to the XADC hardmacro. + * "xlnx,system-management-wiz-1.3": When using the + Xilinx System Management Wizard fabric IP core to access the + UltraScale and UltraScale+ System Monitor. - reg: Address and length of the register set for the device - interrupts: Interrupt for the XADC control interface. - clocks: When using the ZYNQ this must be the ZYNQ PCAP clock, - when using the AXI-XADC pcore this must be the clock that provides the - clock to the AXI bus interface of the core. + when using the axi-xadc or the axi-system-management-wizard this must be + the clock that provides the clock to the AXI bus interface of the core. Optional properties: - xlnx,external-mux: @@ -110,3 +122,20 @@ Examples: }; }; }; + + adc@80000000 { + compatible = "xlnx,system-management-wiz-1.3"; + reg = <0x80000000 0x1000>; + interrupts = <0 81 4>; + interrupt-parent = <&gic>; + clocks = <&fpga1_clk>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + xlnx,bipolar; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml index 626ccb6fe21e..fd4edca34a28 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml @@ -46,31 +46,42 @@ properties: two properties must be present: adi,range-microvolt: - $ref: /schemas/types.yaml#/definitions/int32-array description: | Voltage output range specified as <minimum, maximum> - enum: - - [[0, 5000000]] - - [[0, 10000000]] - - [[-5000000, 5000000]] - - [[-10000000, 10000000]] + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 adi,range-microamp: - $ref: /schemas/types.yaml#/definitions/int32-array description: | Current output range specified as <minimum, maximum> - enum: - - [[0, 20000]] - - [[0, 24000]] - - [[4, 24000]] - - [[-20000, 20000]] - - [[-24000, 24000]] - - [[-1000, 22000]] + oneOf: + - items: + - const: 0 + - enum: [20000, 24000] + - items: + - const: 4 + - const: 24000 + - items: + - const: -20000 + - const: 20000 + - items: + - const: -24000 + - const: 24000 + - items: + - const: -1000 + - const: 22000 reset-gpios: true adi,dc-dc-ilim-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 enum: [150000, 200000, 250000, 300000, 350000, 400000] description: | The dc-to-dc converter current limit. diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml new file mode 100644 index 000000000000..d5c54813ce87 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad5766.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD5766 DAC device driver + +maintainers: + - Cristian Pop <cristian.pop@analog.com> + +description: | + Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad5766-5767.pdf + +properties: + compatible: + enum: + - adi,ad5766 + - adi,ad5767 + + output-range-microvolts: + description: Select converter output range. + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 1000000 + + spi-cpol: true + + reset-gpios: + description: GPIO spec for the RESET pin. As the line is active low, it + should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + +required: + - compatible + - output-range-microvolts + - reg + - spi-max-frequency + - spi-cpol + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad5766@0 { + compatible = "adi,ad5766"; + output-range-microvolts = <(-5000) 5000>; + reg = <0>; + spi-cpol; + spi-max-frequency = <1000000>; + reset-gpios = <&gpio 22 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml index 271998610ceb..5f5b578316bc 100644 --- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml +++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml @@ -39,20 +39,39 @@ properties: allOf: - if: - not: - properties: - compatible: - contains: - const: microchip,mcp4726 + properties: + compatible: + contains: + const: microchip,mcp4725 then: properties: vref-supply: false + required: + - vdd-supply + + - if: + properties: + compatible: + contains: + const: microchip,mcp4726 + then: + anyOf: + - required: + - vdd-supply + - required: + - vref-supply + + - if: + not: + required: + - vref-supply + then: + properties: microchip,vref-buffered: false required: - compatible - reg - - vdd-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml index 0466483be6bb..b6bbc312a7cf 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml @@ -19,6 +19,9 @@ properties: reg: maxItems: 1 + vdd-supply: true + vddio-supply: true + interrupts: minItems: 1 description: diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt deleted file mode 100644 index 233fe207aded..000000000000 --- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt +++ /dev/null @@ -1,45 +0,0 @@ -Invensense MPU-3050 Gyroscope device tree bindings - -Required properties: - - compatible : should be "invensense,mpu3050" - - reg : the I2C address of the sensor - -Optional properties: - - interrupts : interrupt mapping for the trigger interrupt from the - internal oscillator. The following IRQ modes are supported: - IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and - IRQ_TYPE_LEVEL_LOW. The driver should detect and configure the hardware - for the desired interrupt type. - - vdd-supply : supply regulator for the main power voltage. - - vlogic-supply : supply regulator for the signal voltage. - - mount-matrix : see iio/mount-matrix.txt - -Optional subnodes: - - The MPU-3050 will pass through and forward the I2C signals from the - incoming I2C bus, alternatively drive traffic to a slave device (usually - an accelerometer) on its own initiative. Therefore is supports a subnode - i2c gate node. For details see: i2c/i2c-gate.txt - -Example: - -mpu3050@68 { - compatible = "invensense,mpu3050"; - reg = <0x68>; - interrupt-parent = <&foo>; - interrupts = <12 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&bar>; - vlogic-supply = <&baz>; - - /* External I2C interface */ - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - - fnord@18 { - compatible = "fnord"; - reg = <0x18>; - interrupt-parent = <&foo>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml new file mode 100644 index 000000000000..7e2accc3d5ce --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/gyroscope/invensense,mpu3050.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Invensense MPU-3050 Gyroscope + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + const: invensense,mpu3050 + + reg: + maxItems: 1 + + vdd-supply: true + + vlogic-supply: true + + interrupts: + minItems: 1 + description: + Interrupt mapping for the trigger interrupt from the internal oscillator. + + mount-matrix: true + + i2c-gate: + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + description: | + The MPU-3050 will pass through and forward the I2C signals from the + incoming I2C bus, alternatively drive traffic to a slave device (usually + an accelerometer) on its own initiative. Therefore is supports an + i2c-gate subnode. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + gyroscope@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + interrupt-parent = <&foo>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&bar>; + vlogic-supply = <&baz>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml index 64b862637039..967778fb0ce8 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml @@ -21,7 +21,6 @@ properties: description: Connected to ADC_RDY pin. maxim,led-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 description: | diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt deleted file mode 100644 index f2f64749e818..000000000000 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ /dev/null @@ -1,67 +0,0 @@ -InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device - -http://www.invensense.com/mems/gyro/mpu6050.html - -Required properties: - - compatible : should be one of - "invensense,mpu6000" - "invensense,mpu6050" - "invensense,mpu6500" - "invensense,mpu6515" - "invensense,mpu9150" - "invensense,mpu9250" - "invensense,mpu9255" - "invensense,icm20608" - "invensense,icm20609" - "invensense,icm20689" - "invensense,icm20602" - "invensense,icm20690" - "invensense,iam20680" - - reg : the I2C address of the sensor - - interrupts: interrupt mapping for IRQ. It should be configured with flags - IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or - IRQ_TYPE_EDGE_FALLING. - - Refer to interrupt-controller/interrupts.txt for generic interrupt client node - bindings. - -Optional properties: - - vdd-supply: regulator phandle for VDD supply - - vddio-supply: regulator phandle for VDDIO supply - - mount-matrix: an optional 3x3 mounting rotation matrix - - i2c-gate node. These devices also support an auxiliary i2c bus. This is - simple enough to be described using the i2c-gate binding. See - i2c/i2c-gate.txt for more details. - -Example: - mpu6050@68 { - compatible = "invensense,mpu6050"; - reg = <0x68>; - interrupt-parent = <&gpio1>; - interrupts = <18 IRQ_TYPE_EDGE_RISING>; - mount-matrix = "-0.984807753012208", /* x0 */ - "0", /* y0 */ - "-0.173648177666930", /* z0 */ - "0", /* x1 */ - "-1", /* y1 */ - "0", /* z1 */ - "-0.173648177666930", /* x2 */ - "0", /* y2 */ - "0.984807753012208"; /* z2 */ - }; - - - mpu9250@68 { - compatible = "invensense,mpu9250"; - reg = <0x68>; - interrupt-parent = <&gpio3>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - ax8975@c { - compatible = "ak,ak8975"; - reg = <0x0c>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml new file mode 100644 index 000000000000..edbc2921aabd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/invensense,mpu6050.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device + +maintainers: + - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> + +description: | + These devices support both I2C and SPI bus interfaces. + +properties: + compatible: + enum: + - invensense,iam20680 + - invensense,icm20608 + - invensense,icm20609 + - invensense,icm20689 + - invensense,icm20602 + - invensense,icm20690 + - invensense,mpu6000 + - invensense,mpu6050 + - invensense,mpu6500 + - invensense,mpu6515 + - invensense,mpu6880 + - invensense,mpu9150 + - invensense,mpu9250 + - invensense,mpu9255 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: true + + vdd-supply: true + vddio-supply: true + + mount-matrix: true + + i2c-gate: + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + description: | + These devices also support an auxiliary i2c bus via an i2c-gate. + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - invensense,mpu9150 + - invensense,mpu9250 + - invensense,mpu9255 + then: + properties: + i2c-gate: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@68 { + compatible = "invensense,mpu9250"; + reg = <0x68>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + mount-matrix = "-0.984807753012208", /* x0 */ + "0", /* y0 */ + "-0.173648177666930", /* z0 */ + "0", /* x1 */ + "-1", /* y1 */ + "0", /* z1 */ + "-0.173648177666930", /* x2 */ + "0", /* y2 */ + "0.984807753012208"; /* z2 */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + magnetometer@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml index cdef7aeba708..2867ab6bf9b0 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml @@ -30,6 +30,9 @@ properties: reg: maxItems: 1 + vdd-supply: true + vddio-supply: true + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml new file mode 100644 index 000000000000..4b0ef1ef5445 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas530.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Yamaha YAS530 family of magnetometer sensors + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + The Yamaha YAS530 magnetometers is a line of 3-axis magnetometers + first introduced by Yamaha in 2009 with the YAS530. They are successors + of Yamaha's first magnetometer YAS529. Over the years this magnetometer + has been miniaturized and appeared in a number of different variants. + +properties: + $nodename: + pattern: '^magnetometer@[0-9a-f]+$' + + compatible: + items: + - enum: + - yamaha,yas530 + - yamaha,yas532 + - yamaha,yas533 + - yamaha,yas535 + - yamaha,yas536 + - yamaha,yas537 + - yamaha,yas539 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: The YAS530 sensor has a RSTN pin used to reset + the logic inside the sensor. This GPIO line should connect + to that pin and be marked as GPIO_ACTIVE_LOW. + + interrupts: + maxItems: 1 + description: Interrupt for INT pin for interrupt generation. + The polarity, whether the interrupt is active on the rising + or the falling edge, is software-configurable in the hardware. + + vdd-supply: + description: An optional regulator providing core power supply + on the VDD pin, typically 1.8 V or 3.0 V. + + iovdd-supply: + description: An optional regulator providing I/O power supply + for the I2C interface on the IOVDD pin, typically 1.8 V. + + mount-matrix: + description: An optional 3x3 mounting rotation matrix. + +allOf: + - if: + not: + properties: + compatible: + items: + const: yamaha,yas530 + then: + properties: + reset-gpios: false + + - if: + properties: + compatible: + items: + const: yamaha,yas539 + then: + properties: + interrupts: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c-0 { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@2e { + compatible = "yamaha,yas530"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + iovdd-supply = <&ldo2_reg>; + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + interrupts = <&gpio6 13 IRQ_TYPE_EDGE_RISING>; + }; + }; + + i2c-1 { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@2e { + compatible = "yamaha,yas539"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/adc-keys.txt b/Documentation/devicetree/bindings/input/adc-keys.txt index e551814629b4..6c8be6a9ace2 100644 --- a/Documentation/devicetree/bindings/input/adc-keys.txt +++ b/Documentation/devicetree/bindings/input/adc-keys.txt @@ -5,7 +5,8 @@ Required properties: - compatible: "adc-keys" - io-channels: Phandle to an ADC channel - io-channel-names = "buttons"; - - keyup-threshold-microvolt: Voltage at which all the keys are considered up. + - keyup-threshold-microvolt: Voltage above or equal to which all the keys are + considered up. Optional properties: - poll-interval: Poll interval time in milliseconds @@ -17,7 +18,12 @@ Each button (key) is represented as a sub-node of "adc-keys": Required subnode-properties: - label: Descriptive name of the key. - linux,code: Keycode to emit. - - press-threshold-microvolt: Voltage ADC input when this key is pressed. + - press-threshold-microvolt: voltage above or equal to which this key is + considered pressed. + +No two values of press-threshold-microvolt may be the same. +All values of press-threshold-microvolt must be less than +keyup-threshold-microvolt. Example: @@ -47,3 +53,15 @@ Example: press-threshold-microvolt = <500000>; }; }; + ++--------------------------------+------------------------+ +| 2.000.000 <= value | no key pressed | ++--------------------------------+------------------------+ +| 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed | ++--------------------------------+------------------------+ +| 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed | ++--------------------------------+------------------------+ +| 500.000 <= value < 1.000.000 | KEY_ENTER pressed | ++--------------------------------+------------------------+ +| value < 500.000 | no key pressed | ++--------------------------------+------------------------+ diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index da5b0d87e16d..93f2ce3130ae 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -26,6 +26,7 @@ properties: - goodix,gt927 - goodix,gt9271 - goodix,gt928 + - goodix,gt9286 - goodix,gt967 reg: diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index a771a15f053f..046ace461cc9 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -70,11 +70,9 @@ properties: touchscreen-x-mm: description: horizontal length in mm of the touchscreen - $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-y-mm: description: vertical length in mm of the touchscreen - $ref: /schemas/types.yaml#/definitions/uint32 dependencies: touchscreen-size-x: [ touchscreen-size-y ] diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml index 8acca0ae3129..4fd1e2780026 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -29,6 +29,9 @@ properties: - items: - const: allwinner,sun8i-a83t-r-intc - const: allwinner,sun6i-a31-r-intc + - items: + - const: allwinner,sun8i-v3s-nmi + - const: allwinner,sun9i-a80-nmi - const: allwinner,sun9i-a80-nmi - items: - const: allwinner,sun50i-a64-r-intc diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt deleted file mode 100644 index ee3f9c351501..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt +++ /dev/null @@ -1,103 +0,0 @@ -C6X Interrupt Chips -------------------- - -* C64X+ Core Interrupt Controller - - The core interrupt controller provides 16 prioritized interrupts to the - C64X+ core. Priority 0 and 1 are used for reset and NMI respectively. - Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt - sources coming from outside the core. - - Required properties: - -------------------- - - compatible: Should be "ti,c64x+core-pic"; - - #interrupt-cells: <1> - - Interrupt Specifier Definition - ------------------------------ - Single cell specifying the core interrupt priority level (4-15) where - 4 is highest priority and 15 is lowest priority. - - Example - ------- - core_pic: interrupt-controller@0 { - interrupt-controller; - #interrupt-cells = <1>; - compatible = "ti,c64x+core-pic"; - }; - - - -* C64x+ Megamodule Interrupt Controller - - The megamodule PIC consists of four interrupt mupliplexers each of which - combine up to 32 interrupt inputs into a single interrupt output which - may be cascaded into the core interrupt controller. The megamodule PIC - has a total of 12 outputs cascading into the core interrupt controller. - One for each core interrupt priority level. In addition to the combined - interrupt sources, individual megamodule interrupts may be cascaded to - the core interrupt controller. When an individual interrupt is cascaded, - it is no longer handled through a megamodule interrupt combiner and is - considered to have the core interrupt controller as the parent. - - Required properties: - -------------------- - - compatible: "ti,c64x+megamod-pic" - - interrupt-controller - - #interrupt-cells: <1> - - reg: base address and size of register area - - interrupts: This should have four cells; one for each interrupt combiner. - The cells contain the core priority interrupt to which the - corresponding combiner output is wired. - - Optional properties: - -------------------- - - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core - priority interrupts. The first cell corresponds to - core priority 4 and the last cell corresponds to - core priority 15. The value of each cell is the - megamodule interrupt source which is MUXed to - the core interrupt corresponding to the cell - position. Allowed values are 4 - 127. Mapping for - interrupts 0 - 3 (combined interrupt sources) are - ignored. - - Interrupt Specifier Definition - ------------------------------ - Single cell specifying the megamodule interrupt source (4-127). Note that - interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will - use the core interrupt controller as their parent and the specifier will - be the core priority level, not the megamodule interrupt number. - - Examples - -------- - megamod_pic: interrupt-controller@1800000 { - compatible = "ti,c64x+megamod-pic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x1800000 0x1000>; - interrupt-parent = <&core_pic>; - interrupts = < 12 13 14 15 >; - }; - - This is a minimal example where all individual interrupts go through a - combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped - to interrupt 13, etc. - - - megamod_pic: interrupt-controller@1800000 { - compatible = "ti,c64x+megamod-pic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x1800000 0x1000>; - interrupt-parent = <&core_pic>; - interrupts = < 12 13 14 15 >; - ti,c64x+megamod-pic-mux = < 0 0 0 0 - 32 0 0 0 - 0 0 0 0 >; - }; - - This the same as the first example except that megamodule interrupt 32 is - mapped directly to core priority interrupt 8. The node using this interrupt - must set the core controller as its interrupt parent and use 8 in the - interrupt specifier value. diff --git a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml new file mode 100644 index 000000000000..68c328eec03b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT8515 1.5A dual channel LED driver + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Richtek RT8515 is a dual channel (two mode) LED driver that + supports driving a white LED in flash or torch mode. The maximum + current for each mode is defined in hardware using two resistors + RFS and RTS. + +properties: + compatible: + const: richtek,rt8515 + + enf-gpios: + maxItems: 1 + description: A connection to the 'ENF' (enable flash) pin. + + ent-gpios: + maxItems: 1 + description: A connection to the 'ENT' (enable torch) pin. + + richtek,rfs-ohms: + minimum: 7680 + maximum: 367000 + description: The resistance value of the RFS resistor. This + resistors limits the maximum flash current. This must be set + for the property flash-max-microamp to work, the RFS resistor + defines the range of the dimmer setting (brightness) of the + flash LED. + + richtek,rts-ohms: + minimum: 7680 + maximum: 367000 + description: The resistance value of the RTS resistor. This + resistors limits the maximum torch current. This must be set + for the property torch-max-microamp to work, the RTS resistor + defines the range of the dimmer setting (brightness) of the + torch LED. + + led: + type: object + $ref: common.yaml# + properties: + function: true + color: true + flash-max-timeout-us: true + + flash-max-microamp: + maximum: 700000 + description: The maximum current for flash mode + is hardwired to the component using the RFS resistor to + ground. The maximum hardware current setting is calculated + according to the formula Imax = 5500 / RFS. The lowest + allowed resistance value is 7.86 kOhm giving an absolute + maximum current of 700mA. By setting this attribute in + the device tree, you can further restrict the maximum + current below the hardware limit. This requires the RFS + to be defined as it defines the maximum range. + + led-max-microamp: + maximum: 700000 + description: The maximum current for torch mode + is hardwired to the component using the RTS resistor to + ground. The maximum hardware current setting is calculated + according to the formula Imax = 5500 / RTS. The lowest + allowed resistance value is 7.86 kOhm giving an absolute + maximum current of 700mA. By setting this attribute in + the device tree, you can further restrict the maximum + current below the hardware limit. This requires the RTS + to be defined as it defines the maximum range. + + additionalProperties: false + +required: + - compatible + - ent-gpios + - enf-gpios + - led + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "richtek,rt8515"; + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <150000>; + led-max-microamp = <25000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml index 6a56214c6cfd..b80980b1908e 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml @@ -20,6 +20,9 @@ properties: oneOf: - const: allwinner,sun8i-h3-deinterlace - items: + - const: allwinner,sun8i-r40-deinterlace + - const: allwinner,sun8i-h3-deinterlace + - items: - const: allwinner,sun50i-a64-deinterlace - const: allwinner,sun8i-h3-deinterlace diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml index 49bff738aca5..52eab686a177 100644 --- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml +++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml @@ -23,6 +23,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + port: type: object additionalProperties: false @@ -75,6 +78,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/marvell,mmp2.h> + #include <dt-bindings/power/marvell,mmp2.h> camera@d420a000 { compatible = "marvell,mmp2-ccic"; @@ -84,6 +88,7 @@ examples: clock-names = "axi"; #clock-cells = <0>; clock-output-names = "mclk"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; port { camera0_0: endpoint { diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt index 044b11913c49..cf60c5acc0e4 100644 --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt @@ -16,7 +16,7 @@ Required properties: - power-domains: a phandle to the power domain, see Documentation/devicetree/bindings/power/power_domain.txt for details. - mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. - iommus: should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt index 736be7cad385..acfb50375b8a 100644 --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt @@ -14,7 +14,7 @@ Required properties: - power-domains: a phandle to the power domain, see Documentation/devicetree/bindings/power/power_domain.txt for details. - mediatek,larb: must contain the local arbiters in the current SoCs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. - iommus: should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt index 0d03e3ae2be2..f4798d04e925 100644 --- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt +++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt @@ -28,7 +28,7 @@ Required properties (DMA function blocks, child node): argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. - mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. Example: diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml index 6d6ba608fd22..990489fdd2ac 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -26,10 +26,14 @@ properties: compatible: items: - enum: + - renesas,r8a774a1-rpc-if # RZ/G2M + - renesas,r8a774b1-rpc-if # RZ/G2N + - renesas,r8a774c0-rpc-if # RZ/G2E + - renesas,r8a774e1-rpc-if # RZ/G2H - renesas,r8a77970-rpc-if # R-Car V3M - renesas,r8a77980-rpc-if # R-Car V3H - renesas,r8a77995-rpc-if # R-Car D3 - - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device + - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 or RZ/G2 device reg: items: diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 186f04ba9357..e674bba52ee9 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -259,7 +259,6 @@ properties: waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. - $ref: /schemas/types.yaml#/definitions/uint32 default: 10 supports-cqe: diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml index 6cd57863c1db..226fb191913d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml @@ -41,13 +41,11 @@ properties: description: Delay in ms after powering the card and de-asserting the reset-gpios (if any). - $ref: /schemas/types.yaml#/definitions/uint32 power-off-delay-us: description: Delay in us after asserting the reset-gpios (if any) during power off of the card. - $ref: /schemas/types.yaml#/definitions/uint32 required: - compatible diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 1f133f4a2924..0467441d7037 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -74,17 +74,60 @@ allOf: Any configuration is ignored when the phy-mode is set to "rmii". amlogic,rx-delay-ns: + deprecated: true enum: - 0 - 2 default: 0 description: - The internal RGMII RX clock delay (provided by this IP block) in - nanoseconds. When phy-mode is set to "rgmii" then the RX delay - should be explicitly configured. When the phy-mode is set to - either "rgmii-id" or "rgmii-rxid" the RX clock delay is already - provided by the PHY. Any configuration is ignored when the - phy-mode is set to "rmii". + The internal RGMII RX clock delay in nanoseconds. Deprecated, use + rx-internal-delay-ps instead. + + rx-internal-delay-ps: + default: 0 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8b-dwmac + - amlogic,meson8m2-dwmac + - amlogic,meson-gxbb-dwmac + - amlogic,meson-axg-dwmac + then: + properties: + rx-internal-delay-ps: + enum: + - 0 + - 2000 + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-dwmac + then: + properties: + rx-internal-delay-ps: + enum: + - 0 + - 200 + - 400 + - 600 + - 800 + - 1000 + - 1200 + - 1400 + - 1600 + - 1800 + - 2000 + - 2200 + - 2400 + - 2600 + - 2800 + - 3000 properties: compatible: diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml new file mode 100644 index 000000000000..79c38ea14237 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,bcm4908-enet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4908 Ethernet controller + +description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: brcm,bcm4908-enet + + reg: + maxItems: 1 + + interrupts: + description: RX interrupt + + interrupt-names: + const: rx + +required: + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@80002000 { + compatible = "brcm,bcm4908-enet"; + reg = <0x80002000 0x1000>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx"; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 97ca62b0e14d..d0935d2afef8 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -1,108 +1,13 @@ * Broadcom Starfighter 2 integrated swich -Required properties: +See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation. -- compatible: should be one of - "brcm,bcm7445-switch-v4.0" - "brcm,bcm7278-switch-v4.0" - "brcm,bcm7278-switch-v4.8" -- reg: addresses and length of the register sets for the device, must be 6 - pairs of register addresses and lengths -- interrupts: interrupts for the devices, must be two interrupts -- #address-cells: must be 1, see dsa/dsa.txt -- #size-cells: must be 0, see dsa/dsa.txt - -Deprecated binding required properties: +*Deprecated* binding required properties: - dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt - dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt - #address-cells: must be 2, see dsa/dsa.txt -Subnodes: - -The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. - -Optional properties: - -- reg-names: litteral names for the device base register addresses, when present - must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" - -- interrupt-names: litternal names for the device interrupt lines, when present - must be: "switch_0" and "switch_1" - -- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the - switch - -- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported - by the switch - -- brcm,fcb-pause-override: boolean property, if present indicates that the switch - supports Failover Control Block pause override capability - -- brcm,acb-packets-inflight: boolean property, if present indicates that the switch - Admission Control Block supports reporting the number of packets in-flight in a - switch queue - -- resets: a single phandle and reset identifier pair. See - Documentation/devicetree/bindings/reset/reset.txt for details. - -- reset-names: If the "reset" property is specified, this property should have - the value "switch" to denote the switch reset line. - -- clocks: when provided, the first phandle is to the switch's main clock and - is valid for both BCM7445 and BCM7278. The second phandle is only applicable - to BCM7445 and is to support dividing the switch core clock. - -- clock-names: when provided, the first phandle must be "sw_switch", and the - second must be named "sw_switch_mdiv". - -Port subnodes: - -Optional properties: - -- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch - port has Broadcom tags enabled (per-packet metadata) - -Example: - -switch_top@f0b00000 { - compatible = "simple-bus"; - #size-cells = <1>; - #address-cells = <1>; - ranges = <0 0xf0b00000 0x40804>; - - ethernet_switch@0 { - compatible = "brcm,bcm7445-switch-v4.0"; - #size-cells = <0>; - #address-cells = <1>; - reg = <0x0 0x40000 - 0x40000 0x110 - 0x40340 0x30 - 0x40380 0x30 - 0x40400 0x34 - 0x40600 0x208>; - reg-names = "core", "reg", intrl2_0", "intrl2_1", - "fcb, "acb"; - interrupts = <0 0x18 0 - 0 0x19 0>; - brcm,num-gphy = <1>; - brcm,num-rgmii-ports = <2>; - brcm,fcb-pause-override; - brcm,acb-packets-inflight; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - label = "gphy"; - reg = <0>; - }; - }; - }; -}; - Example using the old DSA DeviceTree binding: switch_top@f0b00000 { @@ -132,7 +37,7 @@ switch_top@f0b00000 { switch@0 { reg = <0 0>; #size-cells = <0>; - #address-cells <1>; + #address-cells = <1>; port@0 { label = "gphy"; diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index b1ad6ee68e90..f546b1f7dd6d 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -4,7 +4,7 @@ Generic Bluetooth controller over USB (btusb driver) Required properties: - compatible : should comply with the format "usbVID,PID" specified in - Documentation/devicetree/bindings/usb/usb-device.txt + Documentation/devicetree/bindings/usb/usb-device.yaml At the time of writing, the only OF supported devices (more may be added later) are: @@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt: compatible = "usb1286,204e"; reg = <1>; interrupt-parent = <&gpio0>; - interrupt-name = "wakeup"; + interrupt-names = "wakeup"; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 0d2df30f19db..fe6a949a2eab 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -110,6 +110,16 @@ properties: description: Enable CAN remote wakeup. + fsl,scu-index: + description: | + The scu index of CAN instance. + For SoCs with SCU support, need setup stop mode via SCU firmware, so this + property can help indicate a resource. It supports up to 3 CAN instances + now. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 0 + maximum: 2 + required: - compatible - reg @@ -137,4 +147,5 @@ examples: clocks = <&clks 1>, <&clks 2>; clock-names = "ipg", "per"; fsl,stop-mode = <&gpr 0x34 28>; + fsl,scu-index = /bits/ 8 <1>; }; diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml new file mode 100644 index 000000000000..3f01b65f3b22 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/arrow,xrs700x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arrow SpeedChips XRS7000 Series Switch Device Tree Bindings + +allOf: + - $ref: dsa.yaml# + +maintainers: + - George McCollister <george.mccollister@gmail.com> + +description: + The Arrow SpeedChips XRS7000 Series of single chip gigabit Ethernet switches + are designed for critical networking applications. They have up to three + RGMII ports and one RMII port and are managed via i2c or mdio. + +properties: + compatible: + oneOf: + - enum: + - arrow,xrs7003e + - arrow,xrs7003f + - arrow,xrs7004e + - arrow,xrs7004f + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + switch@8 { + compatible = "arrow,xrs7004e"; + reg = <0x8>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + ethernet-port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&swphy0>; + phy-mode = "rgmii-id"; + }; + ethernet-port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&swphy1>; + phy-mode = "rgmii-id"; + }; + ethernet-port@3 { + reg = <3>; + label = "cpu"; + ethernet = <&fec1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml new file mode 100644 index 000000000000..d730fe5a4355 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Starfighter 2 integrated swich + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm4908-switch + - brcm,bcm7278-switch-v4.0 + - brcm,bcm7278-switch-v4.8 + - brcm,bcm7445-switch-v4.0 + + reg: + minItems: 6 + maxItems: 6 + + reg-names: + items: + - const: core + - const: reg + - const: intrl2_0 + - const: intrl2_1 + - const: fcb + - const: acb + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: switch_0 + - const: switch_1 + + resets: + maxItems: 1 + + reset-names: + const: switch + + clocks: + minItems: 1 + maxItems: 2 + items: + - description: switch's main clock + - description: dividing of the switch core clock + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: sw_switch + - const: sw_switch_mdiv + + brcm,num-gphy: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum number of integrated gigabit PHYs in the switch + + brcm,num-rgmii-ports: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum number of RGMII interfaces supported by the switch + + brcm,fcb-pause-override: + description: if present indicates that the switch supports Failover Control + Block pause override capability + type: boolean + + brcm,acb-packets-inflight: + description: if present indicates that the switch Admission Control Block + supports reporting the number of packets in-flight in a switch queue + type: boolean + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + ports: + type: object + + properties: + brcm,use-bcm-hdr: + description: if present, indicates that the switch port has Broadcom + tags enabled (per-packet metadata) + type: boolean + +required: + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +allOf: + - $ref: "dsa.yaml#" + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm7278-switch-v4.0 + - brcm,bcm7278-switch-v4.8 + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + minItems: 1 + maxItems: 1 + required: + - clocks + - clock-names + - if: + properties: + compatible: + contains: + const: brcm,bcm7445-switch-v4.0 + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + minItems: 2 + maxItems: 2 + required: + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + switch@f0b00000 { + compatible = "brcm,bcm7445-switch-v4.0"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xf0b00000 0x40000>, + <0xf0b40000 0x110>, + <0xf0b40340 0x30>, + <0xf0b40380 0x30>, + <0xf0b40400 0x34>, + <0xf0b40600 0x208>; + reg-names = "core", "reg", "intrl2_0", "intrl2_1", + "fcb", "acb"; + interrupts = <0 0x18 0>, + <0 0x19 0>; + clocks = <&sw_switch>, <&sw_switch_mdiv>; + clock-names = "sw_switch", "sw_switch_mdiv"; + brcm,num-gphy = <1>; + brcm,num-rgmii-ports = <2>; + brcm,fcb-pause-override; + brcm,acb-packets-inflight; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "gphy"; + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index 560369efad6c..de04626a8e9d 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -76,6 +76,12 @@ phy-mode must be set, see also example 2 below! * mt7621: phy-mode = "rgmii-txid"; * mt7623: phy-mode = "rgmii"; +Optional properties: + +- gpio-controller: Boolean; if defined, MT7530's LED controller will run on + GPIO mode. +- #gpio-cells: Must be 2 if gpio-controller is defined. + See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must be specified. diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 0965f6515f9e..f599c1d9c961 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -89,6 +89,7 @@ properties: - trgmii - 1000base-x - 2500base-x + - 5gbase-r - rxaui - xaui @@ -122,7 +123,6 @@ properties: such as flow control thresholds. rx-internal-delay-ps: - $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Receive Clock Delay defined in pico seconds. This is used for controllers that have configurable RX internal delays. @@ -140,7 +140,6 @@ properties: is used for components that can have configurable fifo sizes. tx-internal-delay-ps: - $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Transmit Clock Delay defined in pico seconds. This is used for controllers that have configurable TX internal delays. diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index b78397669320..ce15c173f43f 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -1,5 +1,6 @@ * Marvell Armada 375 Ethernet Controller (PPv2.1) Marvell Armada 7K/8K Ethernet Controller (PPv2.2) + Marvell CN913X Ethernet Controller (PPv2.3) Required properties: @@ -12,10 +13,11 @@ Required properties: - common controller registers - LMS registers - one register area per Ethernet port - For "marvell,armada-7k-pp2", must contain the following register + For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register sets: - packet processor registers - networking interfaces registers + - CM3 address space used for TX Flow Control - clocks: pointers to the reference clocks for this device, consequently: - main controller clock (for both armada-375-pp2 and armada-7k-pp2) @@ -81,7 +83,7 @@ Example for marvell,armada-7k-pp2: cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; + reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>; clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>; clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk"; diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 64b3357ade8a..b3d4013b7ca6 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -28,6 +28,10 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] + qca,disable-smarteee: + description: Disable Atheros SmartEEE feature. + type: boolean + qca,keep-pll-enabled: description: | If set, keep the PLL enabled even if there is no link. Useful if you @@ -36,6 +40,18 @@ properties: Only supported on the AR8031. type: boolean + qca,smarteee-tw-us-100m: + description: EEE Tw parameter for 100M links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + + qca,smarteee-tw-us-1g: + description: EEE Tw parameter for gigabit links. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 255 + vddio-supply: description: | RGMII I/O voltage regulator (see regulator/regulator.yaml). diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 8a2d12644675..8f86084bf12e 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -113,13 +113,6 @@ properties: performing early IPA initialization, including loading and validating firwmare used by the GSI. - modem-remoteproc: - $ref: /schemas/types.yaml#/definitions/phandle - description: - This defines the phandle to the remoteproc node representing - the modem subsystem. This is requied so the IPA driver can - receive and act on notifications of modem up/down events. - memory-region: maxItems: 1 description: @@ -135,7 +128,6 @@ required: - interrupts - interconnects - qcom,smem-states - - modem-remoteproc oneOf: - required: @@ -147,7 +139,7 @@ additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,sdm845.h> @@ -168,7 +160,6 @@ examples: compatible = "qcom,sdm845-ipa"; modem-init; - modem-remoteproc = <&mss_pil>; iommus = <&apps_smmu 0x720 0x3>; reg = <0x1e40000 0x7000>, @@ -178,8 +169,8 @@ examples: "ipa-shared", "gsi"; - interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index 244befb6402a..91ba96d43c6c 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -40,6 +40,7 @@ properties: - renesas,etheravb-r8a77980 # R-Car V3H - renesas,etheravb-r8a77990 # R-Car E3 - renesas,etheravb-r8a77995 # R-Car D3 + - renesas,etheravb-r8a779a0 # R-Car V3U - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2 reg: true @@ -163,12 +164,14 @@ allOf: enum: - renesas,etheravb-r8a774a1 - renesas,etheravb-r8a774b1 + - renesas,etheravb-r8a774e1 - renesas,etheravb-r8a7795 - renesas,etheravb-r8a7796 - renesas,etheravb-r8a77961 - renesas,etheravb-r8a77965 - renesas,etheravb-r8a77970 - renesas,etheravb-r8a77980 + - renesas,etheravb-r8a779a0 then: required: - tx-internal-delay-ps diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index b2f6083f556a..0642b0f59491 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -161,7 +161,8 @@ properties: * snps,route-dcbcp, DCB Control Packets * snps,route-up, Untagged Packets * snps,route-multi-broad, Multicast & Broadcast Packets - * snps,priority, RX queue priority (Range 0x0 to 0xF) + * snps,priority, bitmask of the tagged frames priorities assigned to + the queue snps,mtl-tx-config: $ref: /schemas/types.yaml#/definitions/phandle @@ -188,7 +189,10 @@ properties: * snps,idle_slope, unlock on WoL * snps,high_credit, max write outstanding req. limit * snps,low_credit, max read outstanding req. limit - * snps,priority, TX queue priority (Range 0x0 to 0xF) + * snps,priority, bitmask of the priorities assigned to the queue. + When a PFC frame is received with priorities matching the bitmask, + the queue is blocked from transmitting for the pause time specified + in the PFC frame. snps,reset-gpio: deprecated: true @@ -208,7 +212,6 @@ properties: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 3 maxItems: 3 diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index c47b58f3e3f6..3fae9a5f0c6a 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: The TI AM654x/J721E SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings +title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings maintainers: - Grygorii Strashko <grygorii.strashko@ti.com> @@ -13,19 +13,16 @@ maintainers: description: The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports (one external) and provides Ethernet packet communication for the device. - CPSW2G NUSS features - the Reduced Gigabit Media Independent Interface (RGMII), - Reduced Media Independent Interface (RMII), the Management Data - Input/Output (MDIO) interface for physical layer device (PHY) management, - new version of Common Platform Time Sync (CPTS), updated Address Lookup - Engine (ALE). - One external Ethernet port (port 1) with selectable RGMII/RMII interfaces and - an internal Communications Port Programming Interface (CPPI5) (Host port 0). + The TI AM642x SoC Gigabit Ethernet MAC (CPSW3G NUSS) has three ports + (two external) and provides Ethernet packet communication and switching. + + The internal Communications Port Programming Interface (CPPI5) (Host port 0). Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels - and one RX channels and operating by TI AM654x/J721E NAVSS Unified DMA - Peripheral Root Complex (UDMA-P) controller. - The CPSW2G NUSS is integrated into device MCU domain named MCU_CPSW0. + and one RX channels and operating by NAVSS Unified DMA Peripheral Root + Complex (UDMA-P) controller. - Additional features + CPSWxG features + updated Address Lookup Engine (ALE). priority level Quality Of Service (QOS) support (802.1p) Support for Audio/Video Bridging (P802.1Qav/D6.0) Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F) @@ -38,10 +35,18 @@ description: VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on ingress, Auto VLAN removal on egress and auto pad to minimum frame size. RX/TX csum offload + Management Data Input/Output (MDIO) interface for PHYs management + RMII/RGMII Interfaces support + new version of Common Platform Time Sync (CPTS) + + The CPSWxG NUSS is integrated into + device MCU domain named MCU_CPSW0 on AM654x/J721E SoC. + device MAIN domain named CPSW0 on AM642x SoC. Specifications can be found at - http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf - http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf + https://www.ti.com/lit/pdf/spruid7 + https://www.ti.com/lit/zip/spruil1 + https://www.ti.com/lit/pdf/spruim2 properties: "#address-cells": true @@ -51,11 +56,12 @@ properties: oneOf: - const: ti,am654-cpsw-nuss - const: ti,j721e-cpsw-nuss + - const: ti,am642-cpsw-nuss reg: maxItems: 1 description: - The physical base address and size of full the CPSW2G NUSS IO range + The physical base address and size of full the CPSWxG NUSS IO range reg-names: items: @@ -66,12 +72,16 @@ properties: dma-coherent: true clocks: - description: CPSW2G NUSS functional clock + description: CPSWxG NUSS functional clock clock-names: items: - const: fck + assigned-clock-parents: true + + assigned-clocks: true + power-domains: maxItems: 1 @@ -99,16 +109,16 @@ properties: const: 0 patternProperties: - port@1: + port@[1-2]: type: object - description: CPSW2G NUSS external ports + description: CPSWxG NUSS external ports $ref: ethernet-controller.yaml# properties: reg: - items: - - const: 1 + minimum: 1 + maximum: 2 description: CPSW port number phys: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index 9b7117920d90..ce43a1c58a57 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -73,6 +73,13 @@ properties: items: - const: cpts + assigned-clock-parents: true + + assigned-clocks: true + + power-domains: + maxItems: 1 + ti,cpts-ext-ts-inputs: $ref: /schemas/types.yaml#/definitions/uint32 maximum: 8 diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml new file mode 100644 index 000000000000..59724d18e6f3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Toshiba Visconti DWMAC Ethernet controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +select: + properties: + compatible: + contains: + enum: + - toshiba,visconti-dwmac + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - toshiba,visconti-dwmac + - const: snps,dwmac-4.20a + + reg: + maxItems: 1 + + clocks: + items: + - description: main clock + - description: PHY reference clock + + clock-names: + items: + - const: stmmaceth + - const: phy_ref_clk + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + piether: ethernet@28000000 { + compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a"; + reg = <0 0x28000000 0 0x10000>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clk300mhz>, <&clk125mhz>; + clock-names = "stmmaceth", "phy_ref_clk"; + snps,txpbl = <4>; + snps,rxpbl = <4>; + snps,tso; + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <0x1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index 7360617cdedb..2cd452419ed0 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -38,6 +38,10 @@ Optional properties: 1 to enable partial TX checksum offload, 2 to enable full TX checksum offload - xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload +- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to + support both 1000BaseX and SGMII modes. If set, the phy-mode + should be set to match the mode selected on core reset (i.e. + by the basex_or_sgmii core input line). - clocks : AXI bus clock for the device. Refer to common clock bindings. Used to calculate MDIO clock divisor. If not specified, it is auto-detected from the CPU clock (but only on platforms where diff --git a/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml new file mode 100644 index 000000000000..40b08d83c80b --- /dev/null +++ b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom PMB (Power Management Bus) controller + +description: This document describes Broadcom's PMB controller. It supports + powering various types of connected devices (e.g. PCIe, USB, SATA). + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + enum: + - brcm,bcm4908-pmb + + reg: + description: register space of one or more buses + maxItems: 1 + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: Flag to use for block working in big endian mode. + + "#power-domain-cells": + description: cell specifies device ID (see bcm-pmb.h) + const: 1 + +required: + - reg + - "#power-domain-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/bcm-pmb.h> + + pmb: power-controller@802800e0 { + compatible = "brcm,bcm4908-pmb"; + reg = <0x802800e0 0x40>; + #power-domain-cells = <1>; + }; + + foo { + power-domains = <&pmb BCM_PMB_PCIE0>; + }; diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml index d14cb9bac849..f234a756c193 100644 --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -23,6 +23,7 @@ properties: compatible: enum: + - mediatek,mt8167-power-controller - mediatek,mt8173-power-controller - mediatek,mt8183-power-controller - mediatek,mt8192-power-controller @@ -59,6 +60,7 @@ patternProperties: reg: description: | Power domain index. Valid values are defined in: + "include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain. "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain. "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain. "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain. @@ -82,6 +84,9 @@ patternProperties: be specified by order, adding first the BASIC clocks followed by the SUSBSYS clocks. + domain-supply: + description: domain regulator supply. + mediatek,infracfg: $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the INFRACFG register range. @@ -130,6 +135,9 @@ patternProperties: be specified by order, adding first the BASIC clocks followed by the SUSBSYS clocks. + domain-supply: + description: domain regulator supply. + mediatek,infracfg: $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the INFRACFG register range. @@ -178,6 +186,9 @@ patternProperties: be specified by order, adding first the BASIC clocks followed by the SUSBSYS clocks. + domain-supply: + description: domain regulator supply. + mediatek,infracfg: $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the INFRACFG register range. diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 64825128ee97..1ea21acbbd55 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -19,6 +19,7 @@ properties: - qcom,msm8916-rpmpd - qcom,msm8939-rpmpd - qcom,msm8976-rpmpd + - qcom,msm8994-rpmpd - qcom,msm8996-rpmpd - qcom,msm8998-rpmpd - qcom,qcs404-rpmpd diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml index 0c7e2e44793b..c3b4b7543591 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -83,21 +83,18 @@ properties: for each of the battery capacity lookup table. operating-range-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: operating temperature range of a battery items: - description: minimum temperature at which battery can operate - description: maximum temperature at which battery can operate ambient-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: safe range of ambient temperature items: - description: alert when ambient temperature is lower than this value - description: alert when ambient temperature is higher than this value alert-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: safe range of battery temperature items: - description: alert when battery temperature is lower than this value diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml index 75a56773be4a..813d6afde606 100644 --- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml @@ -50,7 +50,6 @@ properties: maxItems: 1 input-current-limit-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum input current in micro Amps. minimum: 50000 maximum: 500000 diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml index 6f2164f7bc57..228018c87bea 100644 --- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml +++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml @@ -62,7 +62,6 @@ properties: description: IRQ line information. dlg,irq-polling-delay-passive-ms: - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 1000 maximum: 10000 description: | diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index d3d0dc13dd8b..8850c01bd470 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -72,11 +72,9 @@ properties: startup-delay-us: description: startup time in microseconds - $ref: /schemas/types.yaml#/definitions/uint32 off-on-delay-us: description: off delay time in microseconds - $ref: /schemas/types.yaml#/definitions/uint32 enable-active-high: description: diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml index a6c259ce9785..956156fe52a3 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml @@ -19,7 +19,9 @@ description: | properties: compatible: enum: - - nxp,pf8x00 + - nxp,pf8100 + - nxp,pf8121a + - nxp,pf8200 reg: maxItems: 1 @@ -118,7 +120,7 @@ examples: #size-cells = <0>; pmic@8 { - compatible = "nxp,pf8x00"; + compatible = "nxp,pf8100"; reg = <0x08>; regulators { diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index b8f0b7809c02..7d462b899473 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -44,6 +44,7 @@ First Level Nodes - PMIC Definition: Must be one of below: "qcom,pm8005-rpmh-regulators" "qcom,pm8009-rpmh-regulators" + "qcom,pm8009-1-rpmh-regulators" "qcom,pm8150-rpmh-regulators" "qcom,pm8150l-rpmh-regulators" "qcom,pm8350-rpmh-regulators" diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml new file mode 100644 index 000000000000..88aebb370838 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom MISC block PCIe reset controller + +description: This document describes reset controller handling PCIe PERST# + signals. On BCM4908 it's a part of the MISC block. + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + const: brcm,bcm4908-misc-pcie-reset + + reg: + maxItems: 1 + + "#reset-cells": + description: PCIe core id + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@ff802644 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0xff802644 0x04>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt deleted file mode 100644 index 2df4bddeb688..000000000000 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt +++ /dev/null @@ -1,44 +0,0 @@ -Hisilicon System Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -The reset controller registers are part of the system-ctl block on -hi3660 and hi3670 SoCs. - -Required properties: -- compatible: should be one of the following: - "hisilicon,hi3660-reset" for HI3660 - "hisilicon,hi3670-reset", "hisilicon,hi3660-reset" for HI3670 -- hisi,rst-syscon: phandle of the reset's syscon. -- #reset-cells : Specifies the number of cells needed to encode a - reset source. The type shall be a <u32> and the value shall be 2. - - Cell #1 : offset of the reset assert control - register from the syscon register base - offset + 4: deassert control register - offset + 8: status control register - Cell #2 : bit position of the reset in the reset control register - -Example: - iomcu: iomcu@ffd7e000 { - compatible = "hisilicon,hi3660-iomcu", "syscon"; - reg = <0x0 0xffd7e000 0x0 0x1000>; - }; - - iomcu_rst: iomcu_rst_controller { - compatible = "hisilicon,hi3660-reset"; - hisi,rst-syscon = <&iomcu>; - #reset-cells = <2>; - }; - -Specifying reset lines connected to IP modules -============================================== -example: - - i2c0: i2c@..... { - ... - resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */ - ... - }; diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml new file mode 100644 index 000000000000..9bf40952e5b7 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/hisilicon,hi3660-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon System Reset Controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + Please also refer to reset.txt in this directory for common reset + controller binding usage. + The reset controller registers are part of the system-ctl block on + hi3660 and hi3670 SoCs. + +properties: + compatible: + oneOf: + - items: + - const: hisilicon,hi3660-reset + - items: + - const: hisilicon,hi3670-reset + - const: hisilicon,hi3660-reset + + hisilicon,rst-syscon: + description: phandle of the reset's syscon. + $ref: /schemas/types.yaml#/definitions/phandle + + '#reset-cells': + description: | + Specifies the number of cells needed to encode a reset source. + Cell #1 : offset of the reset assert control register from the syscon + register base + offset + 4: deassert control register + offset + 8: status control register + Cell #2 : bit position of the reset in the reset control register + const: 2 + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/hi3660-clock.h> + + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0xffd7e000 0x1000>; + }; + + iomcu_rst: iomcu_rst_controller { + compatible = "hisilicon,hi3660-reset"; + hisilicon,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + + /* Specifying reset lines connected to IP modules */ + i2c@ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0xffd71000 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; +... diff --git a/Documentation/devicetree/bindings/reset/sirf,rstc.txt b/Documentation/devicetree/bindings/reset/sirf,rstc.txt deleted file mode 100644 index 0505de742d30..000000000000 --- a/Documentation/devicetree/bindings/reset/sirf,rstc.txt +++ /dev/null @@ -1,42 +0,0 @@ -CSR SiRFSoC Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "sirf,prima2-rstc" or "sirf,marco-rstc" -- reg: should be register base and length as documented in the - datasheet -- #reset-cells: 1, see below - -example: - -rstc: reset-controller@88010000 { - compatible = "sirf,prima2-rstc"; - reg = <0x88010000 0x1000>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== - -The reset controller(rstc) manages various reset sources. This module provides -reset signals for most blocks in system. Those device nodes should specify the -reset line on the rstc in their resets property, containing a phandle to the -rstc device node and a RESET_INDEX specifying which module to reset, as described -in reset.txt. - -For SiRFSoC, RESET_INDEX is just reset_bit defined in SW_RST0 and SW_RST1 registers. -For modules whose rest_bit is in SW_RST0, its RESET_INDEX is 0~31. For modules whose -rest_bit is in SW_RST1, its RESET_INDEX is 32~63. - -example: - -vpp@90020000 { - compatible = "sirf,prima2-vpp"; - reg = <0x90020000 0x10000>; - interrupts = <31>; - clocks = <&clks 35>; - resets = <&rstc 6>; -}; diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt deleted file mode 100644 index b015508f9780..000000000000 --- a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt +++ /dev/null @@ -1,20 +0,0 @@ -ZTE zx2967 SoCs Reset Controller -======================================= - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: should be one of the following. - * zte,zx296718-reset -- reg: physical base address of the controller and length of memory mapped - region. -- #reset-cells: must be 1. - -example: - - reset: reset-controller@1461060 { - compatible = "zte,zx296718-reset"; - reg = <0x01461060 0x8>; - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml index 37c2a601c3fa..b1b0ee769b71 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml @@ -128,7 +128,6 @@ required: - compatible - reg - interrupts - - clocks - clock-output-names additionalProperties: false diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml index d30dc045aac6..0ec3551f12dd 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -27,7 +27,6 @@ properties: 1: chargeable quartz-load-femtofarads: - $ref: /schemas/types.yaml#/definitions/uint32 description: The capacitive load of the quartz(x-tal), expressed in femto Farad (fF). The default value shall be listed (if optional), @@ -47,7 +46,6 @@ properties: deprecated: true trickle-resistor-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: Selected resistor for trickle charger. Should be given if trickle charger should be enabled. diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 9702c07a6b6c..2b06c6ce4a75 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART) maintainers: - - Fabio Estevam <fabio.estevam@nxp.com> + - Fabio Estevam <festevam@gmail.com> allOf: - $ref: "serial.yaml" diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml index ce1d89496342..14c7594c88c6 100644 --- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS Application UART (AUART) maintainers: - - Fabio Estevam <fabio.estevam@nxp.com> + - Fabio Estevam <festevam@gmail.com> allOf: - $ref: "serial.yaml" diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index c23c93b400f0..1f8e9f2644b6 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -19,7 +19,6 @@ select: contains: enum: - arm,pl011 - - zte,zx296702-uart required: - compatible @@ -30,7 +29,6 @@ properties: - const: arm,pl011 - const: arm,primecell - items: - - const: zte,zx296702-uart - const: arm,primecell reg: @@ -88,14 +86,12 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms. - $ref: /schemas/types.yaml#/definitions/uint32 default: 100 poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms. - $ref: /schemas/types.yaml#/definitions/uint32 default: 3000 required: diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index c139c5edb93e..512a84942f78 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -51,6 +51,7 @@ properties: - renesas,hscif-r8a77980 # R-Car V3H - renesas,hscif-r8a77990 # R-Car E3 - renesas,hscif-r8a77995 # R-Car D3 + - renesas,hscif-r8a779a0 # R-Car V3U - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2 - const: renesas,hscif # generic HSCIF compatible UART diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt deleted file mode 100644 index 1e48bbbeecc6..000000000000 --- a/Documentation/devicetree/bindings/serial/sirf-uart.txt +++ /dev/null @@ -1,34 +0,0 @@ -* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter * - -Required properties: -- compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart", - "sirf,atlas7-uart" or "sirf,atlas7-usp-uart". -- reg : Offset and length of the register set for the device -- interrupts : Should contain uart interrupt -- fifosize : Should define hardware rx/tx fifo size -- clocks : Should contain uart clock number - -Optional properties: -- uart-has-rtscts: we have hardware flow controller pins in hardware -- rts-gpios: RTS pin for USP-based UART if uart-has-rtscts is true -- cts-gpios: CTS pin for USP-based UART if uart-has-rtscts is true - -Example: - -uart0: uart@b0050000 { - cell-index = <0>; - compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x1000>; - interrupts = <17>; - fifosize = <128>; - clocks = <&clks 13>; -}; - -On the board-specific dts, we can put rts-gpios and cts-gpios like - -usp@b0090000 { - compatible = "sirf,prima2-usp-uart"; - uart-has-rtscts; - rts-gpios = <&gpio 15 0>; - cts-gpios = <&gpio 46 0>; -}; diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 06d5f251ec88..8631678283f9 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -50,11 +50,14 @@ properties: minItems: 1 maxItems: 2 - cts-gpios: - maxItems: 1 - - rts-gpios: - maxItems: 1 +# cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts' +# or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow +# control instead of dedicated pins. +# +# It should be noted that both cts-gpios/rts-gpios and 'uart-has-rtscts' or +# 'st,hw-flow-ctrl' (deprecated) properties cannot co-exist in a design. + cts-gpios: true + rts-gpios: true wakeup-source: true diff --git a/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml new file mode 100644 index 000000000000..effcc72f9425 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/imx8m-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Series SoC + +maintainers: + - Alice Guo <alice.guo@nxp.com> + +description: | + NXP i.MX8M series SoCs contain fuse entries from which SoC Unique ID can be + obtained. + +select: + properties: + compatible: + contains: + enum: + - fsl,imx8mm + - fsl,imx8mn + - fsl,imx8mp + - fsl,imx8mq + required: + - compatible + +patternProperties: + "^soc@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - enum: + - fsl,imx8mm-soc + - fsl,imx8mn-soc + - fsl,imx8mp-soc + - fsl,imx8mq-soc + - const: simple-bus + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + dma-ranges: true + + nvmem-cells: + maxItems: 1 + description: Phandle to the SOC Unique ID provided by a nvmem node + + nvmem-cell-names: + const: soc_unique_id + + required: + - compatible + - nvmem-cells + - nvmem-cell-names + + additionalProperties: + type: object + +additionalProperties: true + +examples: + - | + / { + model = "FSL i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + #address-cells = <2>; + #size-cells = <2>; + + soc@0 { + compatible = "fsl,imx8mm-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + nvmem-cells = <&imx8mm_uid>; + nvmem-cell-names = "soc_unique_id"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt index 953add19e937..19c059e44681 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt @@ -20,6 +20,7 @@ power-domains. "qcom,sdm845-aoss-qmp" "qcom,sm8150-aoss-qmp" "qcom,sm8250-aoss-qmp" + "qcom,sm8350-aoss-qmp" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt deleted file mode 100644 index 9326cdf6e1b1..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt +++ /dev/null @@ -1,57 +0,0 @@ -Qualcomm Shared Memory Manager binding - -This binding describes the Qualcomm Shared Memory Manager, used to share data -between various subsystems and OSes in Qualcomm platforms. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be: - "qcom,smem" - -- memory-region: - Usage: required - Value type: <prop-encoded-array> - Definition: handle to memory reservation for main SMEM memory region. - -- qcom,rpm-msg-ram: - Usage: required - Value type: <prop-encoded-array> - Definition: handle to RPM message memory resource - -- hwlocks: - Usage: required - Value type: <prop-encoded-array> - Definition: reference to a hwspinlock used to protect allocations from - the shared memory - -= EXAMPLE -The following example shows the SMEM setup for MSM8974, with a main SMEM region -at 0xfa00000 and the RPM message ram at 0xfc428000: - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - smem_region: smem@fa00000 { - reg = <0xfa00000 0x200000>; - no-map; - }; - }; - - smem@fa00000 { - compatible = "qcom,smem"; - - memory-region = <&smem_region>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - - hwlocks = <&tcsr_mutex 3>; - }; - - soc { - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; - }; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml new file mode 100644 index 000000000000..f7e17713b3d8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,smem.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Shared Memory Manager binding + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + This binding describes the Qualcomm Shared Memory Manager, used to share data + between various subsystems and OSes in Qualcomm platforms. + +properties: + compatible: + const: qcom,smem + + memory-region: + maxItems: 1 + description: handle to memory reservation for main SMEM memory region. + + hwlocks: + maxItems: 1 + + qcom,rpm-msg-ram: + $ref: /schemas/types.yaml#/definitions/phandle + description: handle to RPM message memory resource + +required: + - compatible + - memory-region + - hwlocks + +additionalProperties: false + +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rpm_msg_ram: sram@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index 037c51b2f972..dbc62821c60b 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -81,6 +81,9 @@ properties: ranges: maxItems: 1 + dma-ranges: + maxItems: 1 + power-domains: description: | This property is as per sci-pm-domain.txt. @@ -278,6 +281,9 @@ patternProperties: that is common to all the PRU cores. This should be represented as an interrupt-controller node. + allOf: + - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml# + type: object mdio@[a-f0-9]+$: @@ -299,6 +305,9 @@ patternProperties: present on K3 SoCs have additional auxiliary PRU cores with slightly different IP integration. + allOf: + - $ref: /schemas/remoteproc/ti,pru-rproc.yaml# + type: object required: @@ -371,6 +380,36 @@ examples: reg = <0x32000 0x58>; }; + pruss_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <20 21 22 23 24 25 26 27>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru0: pru@34000 { + compatible = "ti,am3356-pru"; + reg = <0x34000 0x2000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am335x-pru0-fw"; + }; + + pru1: pru@38000 { + compatible = "ti,am3356-pru"; + reg = <0x38000 0x2000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am335x-pru1-fw"; + }; + pruss_mdio: mdio@32400 { compatible = "ti,davinci_mdio"; reg = <0x32400 0x90>; @@ -425,6 +464,43 @@ examples: reg = <0x32000 0x58>; }; + pruss1_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", + "host_intr6", "host_intr7"; + ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */ + }; + + pru1_0: pru@34000 { + compatible = "ti,am4376-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am437x-pru1_0-fw"; + }; + + pru1_1: pru@38000 { + compatible = "ti,am4376-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am437x-pru1_1-fw"; + }; + pruss1_mdio: mdio@32400 { compatible = "ti,davinci_mdio"; reg = <0x32400 0x90>; diff --git a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt b/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt deleted file mode 100644 index 7629de1c2c72..000000000000 --- a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt +++ /dev/null @@ -1,19 +0,0 @@ -* ZTE zx2967 family Power Domains - -zx2967 family includes support for multiple power domains which are used -to gate power to one or more peripherals on the processor. - -Required Properties: - - compatible: should be one of the following. - * zte,zx296718-pcu - for zx296718 power domain. - - reg: physical base address of the controller and length of memory mapped - region. - - #power-domain-cells: Must be 1. - -Example: - - pcu_domain: pcu@117000 { - compatible = "zte,zx296718-pcu"; - reg = <0x00117000 0x1000>; - #power-domain-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml index bf8c8ba25009..54650823b29a 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Mediatek MT8192 with MT6359, RT1015 and RT5682 ASoC sound card driver maintainers: - - Jiaxin Yu <jiaxin.yu@mediatek.com> - - Shane Chien <shane.chien@mediatek.com> + - Jiaxin Yu <jiaxin.yu@mediatek.com> + - Shane Chien <shane.chien@mediatek.com> description: This binding describes the MT8192 sound card. diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml index d116c174b545..70b4a8831073 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml @@ -41,14 +41,12 @@ properties: values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not mentioned or if the value is unknown, then micbias resistor is set to 4k. - $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 0, 2, 4, 8 ] micbias-voltage-m-volts: description: The bias voltage to be used in mVolts. The voltage can take values from 1.25V to 3V by 250mV steps. If this node is not mentioned or the value is unknown, then the value is set to 1.25V. - $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ] lrclk-strength: diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml index 805da4d6a88e..ec06789b21df 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/sound/ti,j721e-cpb-audio.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments J721e Common Processor Board Audio Support maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The audio support on the board is using pcm3168a codec connected to McASP10 diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml index bb780f621628..ee9f960de36b 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/sound/ti,j721e-cpb-ivi-audio.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments J721e Common Processor Board Audio Support maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The Infotainment board plugs into the Common Processor Board, the support of the diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt deleted file mode 100644 index 16b734ad3102..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt +++ /dev/null @@ -1,25 +0,0 @@ -Xilinx Zynq QSPI controller Device Tree Bindings -------------------------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,zynq-qspi-1.0". -- reg : Physical base address and size of QSPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - -Example: - qspi: spi@e000d000 { - compatible = "xlnx,zynq-qspi-1.0"; - reg = <0xe000d000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <0 19 4>; - clock-names = "ref_clk", "pclk"; - clocks = <&clkc 10>, <&clkc 43>; - num-cs = <1>; - }; diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml new file mode 100644 index 000000000000..1f1c40a9f320 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/xlnx,zynq-qspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq QSPI controller + +description: + The Xilinx Zynq QSPI controller is used to access multi-bit serial flash + memory devices. + +allOf: + - $ref: "spi-controller.yaml#" + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +# Everything else is described in the common file +properties: + compatible: + const: xlnx,zynq-qspi-1.0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: reference clock + - description: peripheral clock + + clock-names: + items: + - const: ref_clk + - const: pclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + spi@e000d000 { + compatible = "xlnx,zynq-qspi-1.0"; + reg = <0xe000d000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <0 19 4>; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 10>, <&clkc 43>; + num-cs = <1>; + }; diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index b66a07e21d1e..1c426c211e36 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -49,6 +49,7 @@ properties: - items: - const: allwinner,suniv-f1c100s-system-control - const: allwinner,sun4i-a10-system-control + - const: allwinner,sun50i-h616-system-control reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml index 19d116ff9ddc..6d65771e979c 100644 --- a/Documentation/devicetree/bindings/sram/sram.yaml +++ b/Documentation/devicetree/bindings/sram/sram.yaml @@ -72,6 +72,8 @@ patternProperties: - allwinner,sun4i-a10-sram-d - allwinner,sun9i-a80-smp-sram - allwinner,sun50i-a64-sram-c + - amlogic,meson8-ao-arc-sram + - amlogic,meson8b-ao-arc-sram - amlogic,meson8-smp-sram - amlogic,meson8b-smp-sram - amlogic,meson-gxbb-scp-shmem diff --git a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt b/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt deleted file mode 100644 index d96c1e283e73..000000000000 --- a/Documentation/devicetree/bindings/timer/ti,c64x+timer64.txt +++ /dev/null @@ -1,25 +0,0 @@ -Timer64 -------- - -The timer64 node describes C6X event timers. - -Required properties: - -- compatible: must be "ti,c64x+timer64" -- reg: base address and size of register region -- interrupts: interrupt id - -Optional properties: - -- ti,dscr-dev-enable: Device ID used to enable timer IP through DSCR interface. - -- ti,core-mask: on multi-core SoCs, bitmask of cores allowed to use this timer. - -Example: - timer0: timer@25e0000 { - compatible = "ti,c64x+timer64"; - ti,core-mask = < 0x01 >; - reg = <0x25e0000 0x40>; - interrupt-parent = <&megamod_pic>; - interrupts = < 16 >; - }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index bdc2dc318178..a327130d1faa 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -148,15 +148,13 @@ properties: - maxim,max31730 # mCube 3-axis 8-bit digital accelerometer - mcube,mc3230 - # MEMSIC magnetometer - - memsic,mmc35240 - # MEMSIC 2-axis 8-bit digital accelerometer - - memsic,mxc6225 # Measurement Specialities I2C temperature and humidity sensor - meas,htu21 # Measurement Specialities I2C pressure and temperature sensor - meas,ms5637 # Measurement Specialities I2C pressure and temperature sensor + - meas,ms5803 + # Measurement Specialities I2C pressure and temperature sensor - meas,ms5805 # Measurement Specialities I2C pressure and temperature sensor - meas,ms5837 @@ -166,6 +164,10 @@ properties: - meas,ms8607-temppressure # Measurement Specialties temperature sensor - meas,tsys01 + # MEMSIC magnetometer + - memsic,mmc35240 + # MEMSIC 2-axis 8-bit digital accelerometer + - memsic,mxc6225 # Microchip differential I2C ADC, 1 Channel, 18 bit - microchip,mcp3421 # Microchip differential I2C ADC, 2 Channel, 18 bit diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index c0058332b967..e349fa5de606 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -79,7 +79,9 @@ properties: patternProperties: "^usb@[0-9a-f]+$": - type: object + oneOf: + - $ref: dwc2.yaml# + - $ref: snps,dwc3.yaml# additionalProperties: false @@ -229,6 +231,6 @@ examples: interrupts = <30>; dr_mode = "host"; snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment; + snps,quirk-frame-length-adjustment = <0x20>; }; }; diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt index df0e02e1ee43..bf73de0d5b4a 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -31,13 +31,13 @@ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Sub-nodes: The dwc3 core should be added as subnode to ST DWC3 glue as shown in the example below. The DT binding details of dwc3 can be found in: -Documentation/devicetree/bindings/usb/dwc3.txt +Documentation/devicetree/bindings/usb/snps,dwc3.yaml NB: The dr_mode property described in [1] is NOT optional for this driver, as the default value is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host" or "device". -[1] Documentation/devicetree/bindings/usb/generic.txt +[1] Documentation/devicetree/bindings/usb/usb-drd.yaml Example: diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt index 4aae5b2cef56..a668f43bedf5 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt @@ -19,7 +19,7 @@ Example device node: #address-cells = <0x2>; #size-cells = <0x1>; compatible = "xlnx,zynqmp-dwc3"; - clock-names = "bus_clk" "ref_clk"; + clock-names = "bus_clk", "ref_clk"; clocks = <&clk125>, <&clk125>; ranges; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt deleted file mode 100644 index 1aae2b6160c1..000000000000 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ /dev/null @@ -1,128 +0,0 @@ -synopsys DWC3 CORE - -DWC3- USB3 CONTROLLER. Complies to the generic USB binding properties - as described in 'usb/generic.txt' - -Required properties: - - compatible: must be "snps,dwc3" - - reg : Address and length of the register set for the device - - interrupts: Interrupts used by the dwc3 controller. - - clock-names: list of clock names. Ideally should be "ref", - "bus_early", "suspend" but may be less or more. - - clocks: list of phandle and clock specifier pairs corresponding to - entries in the clock-names property. - -Exception for clocks: - clocks are optional if the parent node (i.e. glue-layer) is compatible to - one of the following: - "cavium,octeon-7130-usb-uctl" - "qcom,dwc3" - "samsung,exynos5250-dwusb3" - "samsung,exynos5433-dwusb3" - "samsung,exynos7-dwusb3" - "sprd,sc9860-dwc3" - "st,stih407-dwc3" - "ti,am437x-dwc3" - "ti,dwc3" - "ti,keystone-dwc3" - "rockchip,rk3399-dwc3" - "xlnx,zynqmp-dwc3" - -Optional properties: - - usb-phy : array of phandle for the PHY device. The first element - in the array is expected to be a handle to the USB2/HS PHY and - the second element is expected to be a handle to the USB3/SS PHY - - phys: from the *Generic PHY* bindings - - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" - or "usb3-phy". - - resets: set of phandle and reset specifier pairs - - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command - failure SW work-around for DWC_usb31 version 1.70a-ea06 - and prior. - - snps,disable_scramble_quirk: true when SW should disable data scrambling. - Only really useful for FPGA builds. - - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled - - snps,lpm-nyet-threshold: LPM NYET threshold - - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk - - snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk - - snps,req_p1p2p3_quirk: when set, the core will always request for - P1/P2/P3 transition sequence. - - snps,del_p1p2p3_quirk: when set core will delay P1/P2/P3 until a certain - amount of 8B10B errors occur. - - snps,del_phy_power_chg_quirk: when set core will delay PHY power change - from P0 to P1/P2/P3. - - snps,lfps_filter_quirk: when set core will filter LFPS reception. - - snps,rx_detect_poll_quirk: when set core will disable a 400us delay to start - Polling LFPS after RX.Detect. - - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value. - - snps,tx_de_emphasis: the value driven to the PHY is controlled by the - LTSSM during USB3 Compliance mode. - - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy. - - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy. - - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG, - disabling the suspend signal to the PHY. - - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled. - - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled. - - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection - in PHY P3 power state. - - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists - in GUSB2PHYCFG, specify that USB2 PHY doesn't provide - a free-running PHY clock. - - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power - from P0 to P1/P2/P3 without delay. - - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check - during HS transmit. - - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in - park mode are disabled. - - snps,dis_metastability_quirk: when set, disable metastability workaround. - CAUTION: use only if you are absolutely sure of it. - - snps,dis-split-quirk: when set, change the way URBs are handled by the - driver. Needed to avoid -EPROTO errors with usbhid - on some devices (Hikey 970). - - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal - utmi_l1_suspend_n, false when asserts utmi_sleep_n - - snps,hird-threshold: HIRD threshold - - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for - UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. - - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ - register for post-silicon frame length adjustment when the - fladj_30mhz_sdbnd signal is invalid or incorrect. - - snps,rx-thr-num-pkt-prd: periodic ESS RX packet threshold count - host mode - only. Set this and rx-max-burst-prd to a valid, - non-zero value 1-16 (DWC_usb31 programming guide - section 1.2.4) to enable periodic ESS RX threshold. - - snps,rx-max-burst-prd: max periodic ESS RX burst size - host mode only. Set - this and rx-thr-num-pkt-prd to a valid, non-zero value - 1-16 (DWC_usb31 programming guide section 1.2.4) to - enable periodic ESS RX threshold. - - snps,tx-thr-num-pkt-prd: periodic ESS TX packet threshold count - host mode - only. Set this and tx-max-burst-prd to a valid, - non-zero value 1-16 (DWC_usb31 programming guide - section 1.2.3) to enable periodic ESS TX threshold. - - snps,tx-max-burst-prd: max periodic ESS TX burst size - host mode only. Set - this and tx-thr-num-pkt-prd to a valid, non-zero value - 1-16 (DWC_usb31 programming guide section 1.2.3) to - enable periodic ESS TX threshold. - - - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. - - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0 - register, undefined length INCR burst type enable and INCRx type. - When just one value, which means INCRX burst mode enabled. When - more than one value, which means undefined length INCR burst type - enabled. The values can be 1, 4, 8, 16, 32, 64, 128 and 256. - - - in addition all properties from usb-xhci.txt from the current directory are - supported as well - - -This is usually a subnode to DWC3 glue to which it is connected. - -dwc3@4a030000 { - compatible = "snps,dwc3"; - reg = <0x4a030000 0xcfff>; - interrupts = <0 92 4> - usb-phy = <&usb2_phy>, <&usb3,phy>; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; -}; diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 6aae1544f240..f7ae79825d7d 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -93,7 +93,7 @@ Sub-nodes: The dwc3 core should be added as subnode to Exynos dwc3 glue. - dwc3 : The binding details of dwc3 can be found in: - Documentation/devicetree/bindings/usb/dwc3.txt + Documentation/devicetree/bindings/usb/snps,dwc3.yaml Example: usb@12000000 { diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml new file mode 100644 index 000000000000..cb4c6f6d3a33 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX8MP Soc USB Controller + +maintainers: + - Li Jun <jun.li@nxp.com> + +properties: + compatible: + const: fsl,imx8mp-dwc3 + + reg: + maxItems: 1 + description: Address and length of the register set for the wrapper of + dwc3 core on the SOC. + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + dma-ranges: + description: + See section 2.3.9 of the DeviceTree Specification. + + ranges: true + + interrupts: + maxItems: 1 + description: The interrupt that is asserted when a wakeup event is + received. + + clocks: + description: + A list of phandle and clock-specifier pairs for the clocks + listed in clock-names. + items: + - description: system hsio root clock. + - description: suspend clock, used for usb wakeup logic. + + clock-names: + items: + - const: hsio + - const: suspend + +# Required child node: + +patternProperties: + "^dwc3@[0-9a-f]+$": + type: object + description: + A child node must exist to represent the core DWC3 IP block + The content of the node is defined in dwc3.txt. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - dma-ranges + - ranges + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + usb3_0: usb@32f10100 { + compatible = "fsl,imx8mp-dwc3"; + reg = <0x32f10100 0x8>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "hsio", "suspend"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x40000000 0x40000000 0xc0000000>; + ranges; + + dwc3@38100000 { + compatible = "snps,dwc3"; + reg = <0x38100000 0x10000>; + clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_USB_CORE_REF>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy0>, <&usb3_phy0>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis-u2-freeclk-exists-quirk; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 247ef00381ea..6816de7dfc00 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -24,8 +24,53 @@ allOf: properties: compatible: - contains: - const: generic-ehci + oneOf: + - items: + - enum: + - allwinner,sun4i-a10-ehci + - allwinner,sun50i-a64-ehci + - allwinner,sun50i-h6-ehci + - allwinner,sun5i-a13-ehci + - allwinner,sun6i-a31-ehci + - allwinner,sun7i-a20-ehci + - allwinner,sun8i-a23-ehci + - allwinner,sun8i-h3-ehci + - allwinner,sun8i-r40-ehci + - allwinner,sun9i-a80-ehci + - aspeed,ast2400-ehci + - aspeed,ast2500-ehci + - aspeed,ast2600-ehci + - brcm,bcm3384-ehci + - brcm,bcm63268-ehci + - brcm,bcm6328-ehci + - brcm,bcm6358-ehci + - brcm,bcm6362-ehci + - brcm,bcm6368-ehci + - brcm,bcm7125-ehci + - brcm,bcm7346-ehci + - brcm,bcm7358-ehci + - brcm,bcm7360-ehci + - brcm,bcm7362-ehci + - brcm,bcm7420-ehci + - brcm,bcm7425-ehci + - brcm,bcm7435-ehci + - ibm,476gtr-ehci + - nxp,lpc1850-ehci + - qca,ar7100-ehci + - snps,hsdk-v1.0-ehci + - socionext,uniphier-ehci + - const: generic-ehci + - items: + - enum: + - cavium,octeon-6335-ehci + - ibm,usb-ehci-440epx + - ibm,usb-ehci-460ex + - nintendo,hollywood-usb-ehci + - st,spear600-ehci + - const: usb-ehci + - enum: + - generic-ehci + - usb-ehci reg: minItems: 1 @@ -101,7 +146,7 @@ additionalProperties: false examples: - | usb@e0000300 { - compatible = "ibm,usb-ehci-440epx", "generic-ehci"; + compatible = "ibm,usb-ehci-440epx", "usb-ehci"; interrupt-parent = <&UIC0>; interrupts = <0x1a 4>; reg = <0xe0000300 90>, <0xe0000390 70>; diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index 2178bcc401bc..53df281f618c 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -14,8 +14,38 @@ maintainers: properties: compatible: - contains: - const: generic-ohci + oneOf: + - items: + - enum: + - allwinner,sun4i-a10-ohci + - allwinner,sun50i-a64-ohci + - allwinner,sun50i-h6-ohci + - allwinner,sun5i-a13-ohci + - allwinner,sun6i-a31-ohci + - allwinner,sun7i-a20-ohci + - allwinner,sun8i-a23-ohci + - allwinner,sun8i-h3-ohci + - allwinner,sun8i-r40-ohci + - allwinner,sun9i-a80-ohci + - brcm,bcm3384-ohci + - brcm,bcm63268-ohci + - brcm,bcm6328-ohci + - brcm,bcm6358-ohci + - brcm,bcm6362-ohci + - brcm,bcm6368-ohci + - brcm,bcm7125-ohci + - brcm,bcm7346-ohci + - brcm,bcm7358-ohci + - brcm,bcm7360-ohci + - brcm,bcm7362-ohci + - brcm,bcm7420-ohci + - brcm,bcm7425-ohci + - brcm,bcm7435-ohci + - ibm,476gtr-ohci + - ingenic,jz4740-ohci + - snps,hsdk-v1.0-ohci + - const: generic-ohci + - const: generic-ohci reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml new file mode 100644 index 000000000000..23d73df96ea3 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/generic-xhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB xHCI Controller Device Tree Bindings + +maintainers: + - Mathias Nyman <mathias.nyman@intel.com> + +allOf: + - $ref: "usb-xhci.yaml#" + +properties: + compatible: + oneOf: + - description: Generic xHCI device + const: generic-xhci + - description: Armada 37xx/375/38x/8k SoCs + items: + - enum: + - marvell,armada3700-xhci + - marvell,armada-375-xhci + - marvell,armada-380-xhci + - marvell,armada-8k-xhci + - const: generic-xhci + - description: Broadcom STB SoCs with xHCI + enum: + - brcm,xhci-brcm-v2 + - brcm,bcm7445-xhci + - description: Generic xHCI device + const: xhci-platform + deprecated: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: reg + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + usb@f0931000 { + compatible = "generic-xhci"; + reg = <0xf0931000 0x8c8>; + interrupts = <0x0 0x4e 0x0>; + }; diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt deleted file mode 100644 index ba472e7aefc9..000000000000 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ /dev/null @@ -1,57 +0,0 @@ -Generic USB Properties - -Optional properties: - - maximum-speed: tells USB controllers we want to work up to a certain - speed. Valid arguments are "super-speed-plus", - "super-speed", "high-speed", "full-speed" and - "low-speed". In case this isn't passed via DT, USB - controllers should default to their maximum HW - capability. - - dr_mode: tells Dual-Role USB controllers that we want to work on a - particular mode. Valid arguments are "host", - "peripheral" and "otg". In case this attribute isn't - passed via DT, USB DRD controllers should default to - OTG. - - phy_type: tells USB controllers that we want to configure the core to support - a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is - selected. Valid arguments are "utmi" and "utmi_wide". - In case this isn't passed via DT, USB controllers should - default to HW capability. - - otg-rev: tells usb driver the release number of the OTG and EH supplement - with which the device and its descriptors are compliant, - in binary-coded decimal (i.e. 2.0 is 0200H). This - property is used if any real OTG features(HNP/SRP/ADP) - is enabled, if ADP is required, otg-rev should be - 0x0200 or above. - - companion: phandle of a companion - - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP - is the basic function of real OTG except you want it - to be a srp-capable only B device. - - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is - optional for OTG device. - - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is - optional for OTG device. - - usb-role-switch: boolean, indicates that the device is capable of assigning - the USB data role (USB host or USB device) for a given - USB connector, such as Type-C, Type-B(micro). - see connector/usb-connector.yaml. - - role-switch-default-mode: indicating if usb-role-switch is enabled, the - device default operation mode of controller while usb - role is USB_ROLE_NONE. Valid arguments are "host" and - "peripheral". Defaults to "peripheral" if not - specified. - - -This is an attribute to a USB controller such as: - -dwc3@4a030000 { - compatible = "synopsys,dwc3"; - reg = <0x4a030000 0xcfff>; - interrupts = <0 92 4> - usb-phy = <&usb2_phy>, <&usb3,phy>; - maximum-speed = "super-speed"; - dr_mode = "otg"; - phy_type = "utmi_wide"; - otg-rev = <0x0200>; - adp-disable; -}; diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml index dd32c10ce6c7..43b91ab62004 100644 --- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml @@ -34,11 +34,8 @@ properties: # Required child node: patternProperties: - "^dwc3@[0-9a-f]+$": - type: object - description: - A child node must exist to represent the core DWC3 IP block. - The content of the node is defined in dwc3.txt. + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# required: - compatible @@ -68,7 +65,7 @@ examples: #address-cells = <1>; #size-cells = <1>; - dwc3@34000000 { + usb@34000000 { compatible = "snps,dwc3"; reg = <0x34000000 0x10000>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt deleted file mode 100644 index 42d8814f903a..000000000000 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ /dev/null @@ -1,121 +0,0 @@ -MT8173 xHCI - -The device node for Mediatek SOC USB3.0 host controller - -There are two scenarios: the first one only supports xHCI driver; -the second one supports dual-role mode, and the host is based on xHCI -driver. Take account of backward compatibility, we divide bindings -into two parts. - -1st: only supports xHCI driver ------------------------------------------------------------------------- - -Required properties: - - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci", - soc-model is the name of SoC, such as mt8173, mt2712 etc, when using - "mediatek,mtk-xhci" compatible string, you need SoC specific ones in - addition, one of: - - "mediatek,mt8173-xhci" - - reg : specifies physical base address and size of the registers - - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control - - interrupts : interrupt used by the controller - - power-domains : a phandle to USB power domain node to control USB's - mtcmos - - vusb33-supply : regulator of USB avdd3.3v - - - clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names - - clock-names : must contain - "sys_ck": controller clock used by normal mode, - the following ones are optional: - "ref_ck": reference clock used by low power mode etc, - "mcu_ck": mcu_bus clock for register access, - "dma_ck": dma_bus clock for data transfer by DMA, - "xhci_ck": controller clock - - - phys : see usb-hcd.yaml in the current directory - -Optional properties: - - wakeup-source : enable USB remote wakeup; - - mediatek,syscon-wakeup : phandle to syscon used to access the register - of the USB wakeup glue layer between xHCI and SPM; it depends on - "wakeup-source", and has two arguments: - - the first one : register base address of the glue layer in syscon; - - the second one : hardware version of the glue layer - - 1 : used by mt8173 etc - - 2 : used by mt2712 etc - - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, - bit1 for u3port1, ... etc; - - vbus-supply : reference to the VBUS regulator; - - usb3-lpm-capable : supports USB3.0 LPM - - pinctrl-names : a pinctrl state named "default" must be defined - - pinctrl-0 : pin control group - See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - - imod-interval-ns: default interrupt moderation interval is 5000ns - -additionally the properties from usb-hcd.yaml (in the current directory) are -supported. - -Example: -usb30: usb@11270000 { - compatible = "mediatek,mt8173-xhci"; - reg = <0 0x11270000 0 0x1000>, - <0 0x11280700 0 0x0100>; - reg-names = "mac", "ippc"; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, - <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck"; - phys = <&phy_port0 PHY_TYPE_USB3>, - <&phy_port1 PHY_TYPE_USB2>; - vusb33-supply = <&mt6397_vusb_reg>; - vbus-supply = <&usb_p1_vbus>; - usb3-lpm-capable; - mediatek,syscon-wakeup = <&pericfg 0x400 1>; - wakeup-source; - imod-interval-ns = <10000>; -}; - -2nd: dual-role mode with xHCI driver ------------------------------------------------------------------------- - -In the case, xhci is added as subnode to mtu3. An example and the DT binding -details of mtu3 can be found in: -Documentation/devicetree/bindings/usb/mediatek,mtu3.txt - -Required properties: - - compatible : should be "mediatek,<soc-model>-xhci", "mediatek,mtk-xhci", - soc-model is the name of SoC, such as mt8173, mt2712 etc, when using - "mediatek,mtk-xhci" compatible string, you need SoC specific ones in - addition, one of: - - "mediatek,mt8173-xhci" - - reg : specifies physical base address and size of the registers - - reg-names: should be "mac" for xHCI MAC - - interrupts : interrupt used by the host controller - - power-domains : a phandle to USB power domain node to control USB's - mtcmos - - vusb33-supply : regulator of USB avdd3.3v - - - clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names - - clock-names : must contain "sys_ck", and the following ones are optional: - "ref_ck", "mcu_ck" and "dma_ck", "xhci_ck" - -Optional properties: - - vbus-supply : reference to the VBUS regulator; - - usb3-lpm-capable : supports USB3.0 LPM - -Example: -usb30: usb@11270000 { - compatible = "mediatek,mt8173-xhci"; - reg = <0 0x11270000 0 0x1000>; - reg-names = "mac"; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; - clock-names = "sys_ck", "ref_ck"; - vusb33-supply = <&mt6397_vusb_reg>; - usb3-lpm-capable; -}; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml new file mode 100644 index 000000000000..14f40efb3b22 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek USB3 xHCI Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +allOf: + - $ref: "usb-xhci.yaml" + +description: | + There are two scenarios: + case 1: only supports xHCI driver; + case 2: supports dual-role mode, and the host is based on xHCI driver. + +properties: + # common properties for both case 1 and case 2 + compatible: + items: + - enum: + - mediatek,mt2701-xhci + - mediatek,mt2712-xhci + - mediatek,mt7622-xhci + - mediatek,mt7623-xhci + - mediatek,mt7629-xhci + - mediatek,mt8173-xhci + - mediatek,mt8183-xhci + - const: mediatek,mtk-xhci + + reg: + minItems: 1 + items: + - description: the registers of xHCI MAC + - description: the registers of IP Port Control + + reg-names: + minItems: 1 + items: + - const: mac + - const: ippc # optional, only needed for case 1. + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle to USB power domain node to control USB's MTCMOS + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: Controller clock used by normal mode + - description: Reference clock used by low power mode etc + - description: Mcu bus clock for register access + - description: DMA bus clock for data transfer + - description: controller clock + + clock-names: + minItems: 1 + items: + - const: sys_ck # required, the following ones are optional + - const: ref_ck + - const: mcu_ck + - const: dma_ck + - const: xhci_ck + + assigned-clocks: + minItems: 1 + maxItems: 5 + + assigned-clock-parents: + minItems: 1 + maxItems: 5 + + phys: + description: + List of all PHYs used on this HCD, it's better to keep PHYs in order + as the hardware layout + minItems: 1 + items: + - description: USB2/HS PHY # required, others are optional + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + + vusb33-supply: + description: Regulator of USB AVDD3.3v + + vbus-supply: + description: Regulator of USB VBUS5v + + usb3-lpm-capable: + description: supports USB3.0 LPM + type: boolean + + imod-interval-ns: + description: + Interrupt moderation interval value, it is 8 times as much as that + defined in the xHCI spec on MTK's controller. + default: 5000 + + # the following properties are only used for case 1 + wakeup-source: + description: enable USB remote wakeup, see power/wakeup-source.txt + type: boolean + + mediatek,syscon-wakeup: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to syscon used to access the register of the USB wakeup glue + layer between xHCI and SPM, the field should always be 3 cells long. + items: + items: + - description: + The first cell represents a phandle to syscon + - description: + The second cell represents the register base address of the glue + layer in syscon + - description: + The third cell represents the hardware version of the glue layer, + 1 is used by mt8173 etc, 2 is used by mt2712 etc + enum: [1, 2] + + mediatek,u3p-dis-msk: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "@[0-9a-f]{1}$": + type: object + description: The hard wired USB devices. + +dependencies: + wakeup-source: [ 'mediatek,syscon-wakeup' ] + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt8173-power.h> + + usb@11270000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; + reg = <0x11270000 0x1000>, <0x11280700 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>; + vusb33-supply = <&mt6397_vusb_reg>; + vbus-supply = <&usb_p1_vbus>; + imod-interval-ns = <10000>; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; + wakeup-source; + usb3-lpm-capable; + }; +... diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt deleted file mode 100644 index a82ca438aec1..000000000000 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ /dev/null @@ -1,108 +0,0 @@ -The device node for Mediatek USB3.0 DRD controller - -Required properties: - - compatible : should be "mediatek,<soc-model>-mtu3", "mediatek,mtu3", - soc-model is the name of SoC, such as mt8173, mt2712 etc, - when using "mediatek,mtu3" compatible string, you need SoC specific - ones in addition, one of: - - "mediatek,mt8173-mtu3" - - reg : specifies physical base address and size of the registers - - reg-names: should be "mac" for device IP and "ippc" for IP port control - - interrupts : interrupt used by the device IP - - power-domains : a phandle to USB power domain node to control USB's - mtcmos - - vusb33-supply : regulator of USB avdd3.3v - - clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names - - clock-names : must contain "sys_ck" for clock of controller, - the following clocks are optional: - "ref_ck", "mcu_ck" and "dma_ck"; - - phys : see usb-hcd.yaml in the current directory - - dr_mode : should be one of "host", "peripheral" or "otg", - refer to usb/generic.txt - -Optional properties: - - #address-cells, #size-cells : should be '2' if the device has sub-nodes - with 'reg' property - - ranges : allows valid 1:1 translation between child's address space and - parent's address space - - extcon : external connector for vbus and idpin changes detection, needed - when supports dual-role mode. - it's considered valid for compatibility reasons, not allowed for - new bindings, and use "usb-role-switch" property instead. - - vbus-supply : reference to the VBUS regulator, needed when supports - dual-role mode. - it's considered valid for compatibility reasons, not allowed for - new bindings, and put into a usb-connector node. - see connector/usb-connector.yaml. - - pinctrl-names : a pinctrl state named "default" is optional, and need be - defined if auto drd switch is enabled, that means the property dr_mode - is set as "otg", and meanwhile the property "mediatek,enable-manual-drd" - is not set. - - pinctrl-0 : pin control group - See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - - - maximum-speed : valid arguments are "super-speed", "high-speed" and - "full-speed"; refer to usb/generic.txt - - usb-role-switch : use USB Role Switch to support dual-role switch, but - not extcon; see usb/generic.txt. - - enable-manual-drd : supports manual dual-role switch via debugfs; usually - used when receptacle is TYPE-A and also wants to support dual-role - mode. - - wakeup-source: enable USB remote wakeup of host mode. - - mediatek,syscon-wakeup : phandle to syscon used to access the register - of the USB wakeup glue layer between SSUSB and SPM; it depends on - "wakeup-source", and has two arguments: - - the first one : register base address of the glue layer in syscon; - - the second one : hardware version of the glue layer - - 1 : used by mt8173 etc - - 2 : used by mt2712 etc - - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, - bit1 for u3port1, ... etc; - -additionally the properties from usb-hcd.yaml (in the current directory) are -supported. - -Sub-nodes: -The xhci should be added as subnode to mtu3 as shown in the following example -if host mode is enabled. The DT binding details of xhci can be found in: -Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt - -The port would be added as subnode if use "usb-role-switch" property. - see graph.txt - -Example: -ssusb: usb@11271000 { - compatible = "mediatek,mt8173-mtu3"; - reg = <0 0x11271000 0 0x3000>, - <0 0x11280700 0 0x0100>; - reg-names = "mac", "ippc"; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>; - phys = <&phy_port0 PHY_TYPE_USB3>, - <&phy_port1 PHY_TYPE_USB2>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, - <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck"; - vusb33-supply = <&mt6397_vusb_reg>; - vbus-supply = <&usb_p0_vbus>; - extcon = <&extcon_usb>; - dr_mode = "otg"; - wakeup-source; - mediatek,syscon-wakeup = <&pericfg 0x400 1>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - usb_host: xhci@11270000 { - compatible = "mediatek,mt8173-xhci"; - reg = <0 0x11270000 0 0x1000>; - reg-names = "mac"; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; - clock-names = "sys_ck", "ref_ck"; - vusb33-supply = <&mt6397_vusb_reg>; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml new file mode 100644 index 000000000000..f5c04b9d2de9 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -0,0 +1,287 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek USB3 DRD Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +allOf: + - $ref: "usb-drd.yaml" + +description: | + The DRD controller has a glue layer IPPC (IP Port Control), and its host is + based on xHCI. + +properties: + compatible: + items: + - enum: + - mediatek,mt2712-mtu3 + - mediatek,mt8173-mtu3 + - mediatek,mt8183-mtu3 + - const: mediatek,mtu3 + + reg: + items: + - description: the registers of device MAC + - description: the registers of IP Port Control + + reg-names: + items: + - const: mac + - const: ippc + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle to USB power domain node to control USB's MTCMOS + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: Controller clock used by normal mode + - description: Reference clock used by low power mode etc + - description: Mcu bus clock for register access + - description: DMA bus clock for data transfer + + clock-names: + minItems: 1 + items: + - const: sys_ck # required, others are optional + - const: ref_ck + - const: mcu_ck + - const: dma_ck + + phys: + description: + List of all the USB PHYs used, it's better to keep the sequence + as the hardware layout. + minItems: 1 + items: + - description: USB2/HS PHY # required, others are optional + - description: USB3/SS(P) PHY + - description: USB2/HS PHY # the following for backward compatible + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + - description: USB3/SS(P) PHY + - description: USB2/HS PHY + + vusb33-supply: + description: Regulator of USB AVDD3.3v + + vbus-supply: + deprecated: true + description: | + Regulator of USB VBUS5v, needed when supports dual-role mode. + Particularly, if use an output GPIO to control a VBUS regulator, should + model it as a regulator. See bindings/regulator/fixed-regulator.yaml + It's considered valid for compatibility reasons, not allowed for + new bindings, and put into a usb-connector node. + + dr_mode: + enum: [host, peripheral, otg] + default: otg + + maximum-speed: + enum: [super-speed-plus, super-speed, high-speed, full-speed] + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + ranges: true + + extcon: + deprecated: true + description: | + Phandle to the extcon device detecting the IDDIG/VBUS state, neede + when supports dual-role mode. + It's considered valid for compatibility reasons, not allowed for + new bindings, and use "usb-role-switch" property instead. + + usb-role-switch: + $ref: /schemas/types.yaml#/definitions/flag + description: Support role switch. + type: boolean + + connector: + $ref: /connector/usb-connector.yaml# + description: + Connector for dual role switch, especially for "gpio-usb-b-connector" + type: object + + port: + description: + Any connector to the data bus of this controller should be modelled + using the OF graph bindings specified, if the "usb-role-switch" + property is used. See graph.txt + type: object + + enable-manual-drd: + $ref: /schemas/types.yaml#/definitions/flag + description: + supports manual dual-role switch via debugfs; usually used when + receptacle is TYPE-A and also wants to support dual-role mode. + type: boolean + + wakeup-source: + description: enable USB remote wakeup, see power/wakeup-source.txt + type: boolean + + mediatek,syscon-wakeup: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to syscon used to access the register of the USB wakeup glue + layer between xHCI and SPM, the field should always be 3 cells long. + items: + items: + - description: + The first cell represents a phandle to syscon + - description: + The second cell represents the register base address of the glue + layer in syscon + - description: + The third cell represents the hardware version of the glue layer, + 1 is used by mt8173 etc, 2 is used by mt2712 etc + enum: [1, 2] + + mediatek,u3p-dis-msk: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc + +# Required child node when support dual-role +patternProperties: + "^usb@[0-9a-f]+$": + type: object + $ref: /usb/mediatek,mtk-xhci.yaml# + description: + The xhci should be added as subnode to mtu3 as shown in the following + example if the host mode is enabled. + +dependencies: + connector: [ 'usb-role-switch' ] + port: [ 'usb-role-switch' ] + wakeup-source: [ 'mediatek,syscon-wakeup' ] + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + # Dual role switch by extcon + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt8173-power.h> + + usb@11271000 { + compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3"; + reg = <0x11271000 0x3000>, <0x11280700 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>; + phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + vusb33-supply = <&mt6397_vusb_reg>; + vbus-supply = <&usb_p0_vbus>; + extcon = <&extcon_usb>; + dr_mode = "otg"; + wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + xhci: usb@11270000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; + reg = <0x11270000 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + vusb33-supply = <&mt6397_vusb_reg>; + }; + }; + + # Enable/disable device by an input gpio for VBUS pin + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/power/mt2712-power.h> + + usb@112c1000 { + compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3"; + reg = <0x112c1000 0x3000>, <0x112d0700 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port2 PHY_TYPE_USB2>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + dr_mode = "peripheral"; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + vbus-gpios = <&pio 13 GPIO_ACTIVE_HIGH>; + }; + }; + + # Dual role switch with type-c + - | + usb@11201000 { + compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port0 PHY_TYPE_USB2>; + clocks = <&clk26m>; + clock-names = "sys_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; + wakeup-source; + dr_mode = "otg"; + usb-role-switch; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + host: usb@11200000 { + compatible = "mediatek,mt8183-xhci", "mediatek,mtk-xhci"; + reg = <0x11200000 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>; + clock-names = "sys_ck"; + }; + + port { + usb_role_sw: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt deleted file mode 100644 index 5eedb0296562..000000000000 --- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt +++ /dev/null @@ -1,57 +0,0 @@ -MediaTek musb DRD/OTG controller -------------------------------------------- - -Required properties: - - compatible : should be one of: - "mediatek,mt2701-musb" - ... - followed by "mediatek,mtk-musb" - - reg : specifies physical base address and size of - the registers - - interrupts : interrupt used by musb controller - - interrupt-names : must be "mc" - - phys : PHY specifier for the OTG phy - - dr_mode : should be one of "host", "peripheral" or "otg", - refer to usb/generic.txt - - clocks : a list of phandle + clock-specifier pairs, one for - each entry in clock-names - - clock-names : must contain "main", "mcu", "univpll" - for clocks of controller - -Optional properties: - - power-domains : a phandle to USB power domain node to control USB's - MTCMOS - -Required child nodes: - usb connector node as defined in bindings/connector/usb-connector.yaml -Optional properties: - - id-gpios : input GPIO for USB ID pin. - - vbus-gpios : input GPIO for USB VBUS pin. - - vbus-supply : reference to the VBUS regulator, needed when supports - dual-role mode - - usb-role-switch : use USB Role Switch to support dual-role switch, see - usb/generic.txt. - -Example: - -usb2: usb@11200000 { - compatible = "mediatek,mt2701-musb", - "mediatek,mtk-musb"; - reg = <0 0x11200000 0 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "mc"; - phys = <&u2port2 PHY_TYPE_USB2>; - dr_mode = "otg"; - clocks = <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB0_MCU>, - <&pericfg CLK_PERI_USB_SLV>; - clock-names = "main","mcu","univpll"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; - usb-role-switch; - connector{ - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; - vbus-supply = <&usb_vbus>; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.yaml b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml new file mode 100644 index 000000000000..84ddacfdbe9b --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,musb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MUSB DRD/OTG Controller Device Tree Bindings + +maintainers: + - Min Guo <min.guo@mediatek.com> + +properties: + $nodename: + pattern: '^usb@[0-9a-f]+$' + + compatible: + items: + - enum: + - mediatek,mt8516-musb + - mediatek,mt2701-musb + - const: mediatek,mtk-musb + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: mc + + clocks: + items: + - description: The main/core clock + - description: The system bus clock + - description: The 48Mhz clock + + clock-names: + items: + - const: main + - const: mcu + - const: univpll + + phys: + maxItems: 1 + + usb-role-switch: + $ref: /schemas/types.yaml#/definitions/flag + description: Support role switch. See usb/generic.txt + type: boolean + + dr_mode: + enum: + - host + - otg + - peripheral + + power-domains: + description: A phandle to USB power domain node to control USB's MTCMOS + maxItems: 1 + + connector: + $ref: /connector/usb-connector.yaml# + description: Connector for dual role switch + type: object + +dependencies: + usb-role-switch: [ 'connector' ] + connector: [ 'usb-role-switch' ] + +required: + - compatible + - reg + - interrupts + - interrupt-names + - phys + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt2701-power.h> + + usb@11200000 { + compatible = "mediatek,mt2701-musb", "mediatek,mtk-musb"; + reg = <0x11200000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_vbus>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 38d9bb8507cf..f0dbc5ae45ae 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -65,7 +65,7 @@ Sub-nodes: The dwc3 core should be added as subnode to omap dwc3 glue. - dwc3 : The binding details of dwc3 can be found in: - Documentation/devicetree/bindings/usb/dwc3.txt + Documentation/devicetree/bindings/usb/snps,dwc3.yaml omap_dwc3 { compatible = "ti,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 2cf525d21e05..c3cbd1fa9944 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -17,6 +17,10 @@ properties: - qcom,msm8998-dwc3 - qcom,sc7180-dwc3 - qcom,sdm845-dwc3 + - qcom,sdx55-dwc3 + - qcom,sm8150-dwc3 + - qcom,sm8250-dwc3 + - qcom,sm8350-dwc3 - const: qcom,dwc3 reg: @@ -103,11 +107,8 @@ properties: # Required child node: patternProperties: - "^dwc3@[0-9a-f]+$": - type: object - description: - A child node must exist to represent the core DWC3 IP block - The content of the node is defined in dwc3.txt. + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# required: - compatible @@ -162,7 +163,7 @@ examples: resets = <&gcc GCC_USB30_PRIM_BCR>; - dwc3@a600000 { + usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml index 22603256ddf8..4c5efaf02308 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml @@ -11,7 +11,7 @@ maintainers: - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> allOf: - - $ref: "usb-hcd.yaml" + - $ref: "usb-xhci.yaml" properties: compatible: @@ -68,7 +68,7 @@ required: - power-domains - resets -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt deleted file mode 100644 index 94520493233b..000000000000 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ /dev/null @@ -1,56 +0,0 @@ -Rockchip SuperSpeed DWC3 USB SoC controller - -Required properties: -- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC -- clocks: A list of phandle + clock-specifier pairs for the - clocks listed in clock-names -- clock-names: Should contain the following: - "ref_clk" Controller reference clk, have to be 24 MHz - "suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz - "bus_clk" Master/Core clock, have to be >= 62.5 MHz for SS - operation and >= 30MHz for HS operation - "grf_clk" Controller grf clk - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY -Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY - -Example device nodes: - - usbdrd3_0: usb@fe800000 { - compatible = "rockchip,rk3399-dwc3"; - clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, - <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - usbdrd_dwc3_0: dwc3@fe800000 { - compatible = "snps,dwc3"; - reg = <0x0 0xfe800000 0x0 0x100000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "otg"; - }; - }; - - usbdrd3_1: usb@fe900000 { - compatible = "rockchip,rk3399-dwc3"; - clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, - <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>; - clock-names = "ref_clk", "suspend_clk", - "bus_clk", "grf_clk"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - usbdrd_dwc3_1: dwc3@fe900000 { - compatible = "snps,dwc3"; - reg = <0x0 0xfe900000 0x0 0x100000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "otg"; - }; - }; diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml new file mode 100644 index 000000000000..04077f2d7faf --- /dev/null +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/rockchip,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SuperSpeed DWC3 USB SoC controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: + The common content of the node is defined in snps,dwc3.yaml. + + Phy documentation is provided in the following places. + + USB2.0 PHY + Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml + + Type-C PHY + Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt + +allOf: + - $ref: snps,dwc3.yaml# + +select: + properties: + compatible: + contains: + enum: + - rockchip,rk3328-dwc3 + - rockchip,rk3399-dwc3 + required: + - compatible + +properties: + compatible: + items: + - enum: + - rockchip,rk3328-dwc3 + - rockchip,rk3399-dwc3 + - const: snps,dwc3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + items: + - description: + Controller reference clock, must to be 24 MHz + - description: + Controller suspend clock, must to be 24 MHz or 32 KHz + - description: + Master/Core clock, must to be >= 62.5 MHz for SS + operation and >= 30MHz for HS operation + - description: + Controller grf clock + + clock-names: + minItems: 3 + items: + - const: ref_clk + - const: suspend_clk + - const: bus_clk + - const: grf_clk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: usb3-otg + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + usbdrd3_0: usb@fe800000 { + compatible = "rockchip,rk3399-dwc3", "snps,dwc3"; + reg = <0x0 0xfe800000 0x0 0x100000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + dr_mode = "otg"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml new file mode 100644 index 000000000000..2247da77eac1 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -0,0 +1,332 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/snps,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare USB3 Controller + +maintainers: + - Felipe Balbi <balbi@kernel.org> + +description: + This is usually a subnode to DWC3 glue to which it is connected, but can also + be presented as a standalone DT node with an optional vendor-specific + compatible string. + +allOf: + - $ref: usb-drd.yaml# + - if: + properties: + dr_mode: + const: peripheral + + required: + - dr_mode + then: + $ref: usb.yaml# + else: + $ref: usb-xhci.yaml# + +properties: + compatible: + contains: + oneOf: + - const: snps,dwc3 + - const: synopsys,dwc3 + deprecated: true + + interrupts: + description: + It's either a single common DWC3 interrupt (dwc_usb3) or individual + interrupts for the host, gadget and DRD modes. + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 3 + oneOf: + - const: dwc_usb3 + - items: + enum: [host, peripheral, otg] + + clocks: + description: + In general the core supports three types of clocks. bus_early is a + SoC Bus Clock (AHB/AXI/Native). ref generates ITP when the UTMI/ULPI + PHY is suspended. suspend clocks a small part of the USB3 core when + SS PHY in P3. But particular cases may differ from that having less + or more clock sources with another names. + + clock-names: + contains: + anyOf: + - enum: [bus_early, ref, suspend] + - true + + usb-phy: + minItems: 1 + items: + - description: USB2/HS PHY + - description: USB3/SS PHY + + phys: + minItems: 1 + items: + - description: USB2/HS PHY + - description: USB3/SS PHY + + phy-names: + minItems: 1 + items: + - const: usb2-phy + - const: usb3-phy + + resets: + minItems: 1 + + snps,usb2-lpm-disable: + description: Indicate if we don't want to enable USB2 HW LPM + type: boolean + + snps,usb3_lpm_capable: + description: Determines if platform is USB3 LPM capable + type: boolean + + snps,dis-start-transfer-quirk: + description: + When set, disable isoc START TRANSFER command failure SW work-around + for DWC_usb31 version 1.70a-ea06 and prior. + type: boolean + + snps,disable_scramble_quirk: + description: + True when SW should disable data scrambling. Only really useful for FPGA + builds. + type: boolean + + snps,has-lpm-erratum: + description: True when DWC3 was configured with LPM Erratum enabled + type: boolean + + snps,lpm-nyet-threshold: + description: LPM NYET threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,u2exit_lfps_quirk: + description: Set if we want to enable u2exit lfps quirk + type: boolean + + snps,u2ss_inp3_quirk: + description: Set if we enable P3 OK for U2/SS Inactive quirk + type: boolean + + snps,req_p1p2p3_quirk: + description: + When set, the core will always request for P1/P2/P3 transition sequence. + type: boolean + + snps,del_p1p2p3_quirk: + description: + When set core will delay P1/P2/P3 until a certain amount of 8B10B errors + occur. + type: boolean + + snps,del_phy_power_chg_quirk: + description: When set core will delay PHY power change from P0 to P1/P2/P3. + type: boolean + + snps,lfps_filter_quirk: + description: When set core will filter LFPS reception. + type: boolean + + snps,rx_detect_poll_quirk: + description: + when set core will disable a 400us delay to start Polling LFPS after + RX.Detect. + type: boolean + + snps,tx_de_emphasis_quirk: + description: When set core will set Tx de-emphasis value + type: boolean + + snps,tx_de_emphasis: + description: + The value driven to the PHY is controlled by the LTSSM during USB3 + Compliance mode. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: + - 0 # -6dB de-emphasis + - 1 # -3.5dB de-emphasis + - 2 # No de-emphasis + + snps,dis_u3_susphy_quirk: + description: When set core will disable USB3 suspend phy + type: boolean + + snps,dis_u2_susphy_quirk: + description: When set core will disable USB2 suspend phy + type: boolean + + snps,dis_enblslpm_quirk: + description: + When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal + to the PHY. + type: boolean + + snps,dis-u1-entry-quirk: + description: Set if link entering into U1 needs to be disabled + type: boolean + + snps,dis-u2-entry-quirk: + description: Set if link entering into U2 needs to be disabled + type: boolean + + snps,dis_rxdet_inp3_quirk: + description: + When set core will disable receiver detection in PHY P3 power state. + type: boolean + + snps,dis-u2-freeclk-exists-quirk: + description: + When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 + PHY doesn't provide a free-running PHY clock. + type: boolean + + snps,dis-del-phy-power-chg-quirk: + description: + When set core will change PHY power from P0 to P1/P2/P3 without delay. + type: boolean + + snps,dis-tx-ipgap-linecheck-quirk: + description: When set, disable u2mac linestate check during HS transmit + type: boolean + + snps,parkmode-disable-ss-quirk: + description: + When set, all SuperSpeed bus instances in park mode are disabled. + type: boolean + + snps,dis_metastability_quirk: + description: + When set, disable metastability workaround. CAUTION! Use only if you are + absolutely sure of it. + type: boolean + + snps,dis-split-quirk: + description: + When set, change the way URBs are handled by the driver. Needed to + avoid -EPROTO errors with usbhid on some devices (Hikey 970). + type: boolean + + snps,is-utmi-l1-suspend: + description: + True when DWC3 asserts output signal utmi_l1_suspend_n, false when + asserts utmi_sleep_n. + type: boolean + + snps,hird-threshold: + description: HIRD threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,hsphy_interface: + description: + High-Speed PHY interface selection between UTMI+ and ULPI when the + DWC_USB3_HSPHY_INTERFACE has value 3. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [utmi, ulpi] + + snps,quirk-frame-length-adjustment: + description: + Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame + length adjustment when the fladj_30mhz_sdbnd signal is invalid or + incorrect. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x3f + + snps,rx-thr-num-pkt-prd: + description: + Periodic ESS RX packet threshold count (host mode only). Set this and + snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,rx-max-burst-prd: + description: + Max periodic ESS RX burst size (host mode only). Set this and + snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt-prd: + description: + Periodic ESS TX packet threshold count (host mode only). Set this and + snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-max-burst-prd: + description: + Max periodic ESS TX burst size (host mode only). Set this and + snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + tx-fifo-resize: + description: Determines if the FIFO *has* to be reallocated + deprecated: true + type: boolean + + snps,incr-burst-type-adjustment: + description: + Value for INCR burst type of GSBUSCFG0 register, undefined length INCR + burst type enable and INCRx type. A single value means INCRX burst mode + enabled. If more than one value specified, undefined length INCR burst + type will be enabled with burst lengths utilized up to the maximum + of the values passed in this property. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + enum: [1, 4, 8, 16, 32, 64, 128, 256] + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + usb@4a030000 { + compatible = "snps,dwc3"; + reg = <0x4a030000 0xcfff>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + - | + usb@4a000000 { + compatible = "snps,dwc3"; + reg = <0x4a000000 0xcfff>; + interrupts = <0 92 4>; + clocks = <&clk 1>, <&clk 2>, <&clk 3>; + clock-names = "bus_early", "ref", "suspend"; + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + }; +... diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 388245b91a55..c80a83571919 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -11,12 +11,18 @@ maintainers: properties: compatible: - items: + oneOf: - const: ti,j721e-usb + - const: ti,am64-usb + - items: + - const: ti,j721e-usb + - const: ti,am64-usb reg: description: module registers + ranges: true + power-domains: description: PM domain provider node and an args specifier containing @@ -58,6 +64,8 @@ properties: '#size-cells': const: 2 + dma-coherent: true + patternProperties: "^usb@": type: object diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index c1b19fc5d0a2..ca7fbe3ed22e 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -64,9 +64,7 @@ properties: patternProperties: "usb@[a-f0-9]+$": - type: object - description: This is the node representing the DWC3 controller instance - Documentation/devicetree/bindings/usb/dwc3.txt + $ref: snps,dwc3.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt deleted file mode 100644 index 036be172b1ae..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ /dev/null @@ -1,102 +0,0 @@ -Generic USB Device Properties - -Usually, we only use device tree for hard wired USB device. -The reference binding doc is from: -http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps - -Four types of device-tree nodes are defined: "host-controller nodes" -representing USB host controllers, "device nodes" representing USB devices, -"interface nodes" representing USB interfaces and "combined nodes" -representing simple USB devices. - -A combined node shall be used instead of a device node and an interface node -for devices of class 0 or 9 (hub) with a single configuration and a single -interface. - -A "hub node" is a combined node or an interface node that represents a USB -hub. - - -Required properties for device nodes: -- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. - The textual representation of VID and PID shall be in lower case hexadecimal - with leading zeroes suppressed. The other compatible strings from the above - standard binding could also be used, but a device adhering to this binding - may leave out all except for "usbVID,PID". -- reg: the number of the USB hub port or the USB host-controller port to which - this device is attached. The range is 1-255. - - -Required properties for device nodes with interface nodes: -- #address-cells: shall be 2 -- #size-cells: shall be 0 - - -Required properties for interface nodes: -- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is - the product id, CN is the configuration value and IN is the interface - number. The textual representation of VID, PID, CN and IN shall be in lower - case hexadecimal with leading zeroes suppressed. The other compatible - strings from the above standard binding could also be used, but a device - adhering to this binding may leave out all except for - "usbifVID,PID.configCN.IN". -- reg: the interface number and configuration value - -The configuration component is not included in the textual representation of -an interface-node unit address for configuration 1. - - -Required properties for combined nodes: -- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. - The textual representation of VID and PID shall be in lower case hexadecimal - with leading zeroes suppressed. The other compatible strings from the above - standard binding could also be used, but a device adhering to this binding - may leave out all except for "usbVID,PID". -- reg: the number of the USB hub port or the USB host-controller port to which - this device is attached. The range is 1-255. - - -Required properties for hub nodes with device nodes: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - - -Required properties for host-controller nodes with device nodes: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - - -Example: - -&usb1 { /* host controller */ - #address-cells = <1>; - #size-cells = <0>; - - hub@1 { /* hub connected to port 1 */ - compatible = "usb5e3,608"; - reg = <1>; - }; - - device@2 { /* device connected to port 2 */ - compatible = "usb123,4567"; - reg = <2>; - }; - - device@3 { /* device connected to port 3 */ - compatible = "usb123,abcd"; - reg = <3>; - - #address-cells = <2>; - #size-cells = <0>; - - interface@0 { /* interface 0 of configuration 1 */ - compatible = "usbif123,abcd.config1.0"; - reg = <0 1>; - }; - - interface@0,2 { /* interface 0 of configuration 2 */ - compatible = "usbif123,abcd.config2.0"; - reg = <0 2>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml new file mode 100644 index 000000000000..d4c99809ee9a --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-device.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-device.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The device tree bindings for the Generic USB Device + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: | + Usually, we only use device tree for hard wired USB device. + The reference binding doc is from: + http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps + + Four types of device-tree nodes are defined: "host-controller nodes" + representing USB host controllers, "device nodes" representing USB devices, + "interface nodes" representing USB interfaces and "combined nodes" + representing simple USB devices. + + A combined node shall be used instead of a device node and an interface node + for devices of class 0 or 9 (hub) with a single configuration and a single + interface. + + A "hub node" is a combined node or an interface node that represents a USB + hub. + +properties: + compatible: + pattern: "^usb[0-9a-f]{1,4},[0-9a-f]{1,4}$" + description: Device nodes or combined nodes. + "usbVID,PID", where VID is the vendor id and PID the product id. + The textual representation of VID and PID shall be in lower case + hexadecimal with leading zeroes suppressed. The other compatible + strings from the above standard binding could also be used, + but a device adhering to this binding may leave out all except + for "usbVID,PID". + + reg: + description: the number of the USB hub port or the USB host-controller + port to which this device is attached. The range is 1-255. + maxItems: 1 + + "#address-cells": + description: should be 1 for hub nodes with device nodes, + should be 2 for device nodes with interface nodes. + enum: [1, 2] + + "#size-cells": + const: 0 + +patternProperties: + "^interface@[0-9a-f]{1,2}(,[0-9a-f]{1,2})$": + type: object + description: USB interface nodes. + The configuration component is not included in the textual + representation of an interface-node unit address for configuration 1. + + properties: + compatible: + pattern: "^usbif[0-9a-f]{1,4},[0-9a-f]{1,4}.config[0-9a-f]{1,2}.[0-9a-f]{1,2}$" + description: Interface nodes. + "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is + the product id, CN is the configuration value and IN is the interface + number. The textual representation of VID, PID, CN and IN shall be + in lower case hexadecimal with leading zeroes suppressed. + The other compatible strings from the above standard binding could + also be used, but a device adhering to this binding may leave out + all except for "usbifVID,PID.configCN.IN". + + reg: + description: should be 2 cells long, the first cell represents + the interface number and the second cell represents the + configuration value. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: true + +examples: + #hub connected to port 1 + #device connected to port 2 + #device connected to port 3 + # interface 0 of configuration 1 + # interface 0 of configuration 2 + - | + usb@11270000 { + reg = <0x11270000 0x1000>; + interrupts = <0x0 0x4e 0x0>; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb5e3,608"; + reg = <1>; + }; + + device@2 { + compatible = "usb123,4567"; + reg = <2>; + }; + + device@3 { + compatible = "usb123,abcd"; + reg = <3>; + + #address-cells = <2>; + #size-cells = <0>; + + interface@0 { + compatible = "usbif123,abcd.config1.0"; + reg = <0 1>; + }; + + interface@0,2 { + compatible = "usbif123,abcd.config2.0"; + reg = <0 2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-drd.yaml b/Documentation/devicetree/bindings/usb/usb-drd.yaml new file mode 100644 index 000000000000..f229fc8068d9 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-drd.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-drd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic USB OTG Controller Device Tree Bindings + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +properties: + otg-rev: + description: + Tells usb driver the release number of the OTG and EH supplement with + which the device and its descriptors are compliant, in binary-coded + decimal (i.e. 2.0 is 0200H). This property is used if any real OTG + features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be + 0x0200 or above. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0x0100, 0x0120, 0x0130, 0x0200] + + dr_mode: + description: + Tells Dual-Role USB controllers that we want to work on a particular + mode. In case this attribute isn't passed via DT, USB DRD controllers + should default to OTG. + $ref: /schemas/types.yaml#/definitions/string + enum: [host, peripheral, otg] + + hnp-disable: + description: + Tells OTG controllers we want to disable OTG HNP. Normally HNP is the + basic function of real OTG except you want it to be a srp-capable only B + device. + type: boolean + + srp-disable: + description: + Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG + device. + type: boolean + + adp-disable: + description: + Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG + device. + type: boolean + + usb-role-switch: + description: + Indicates that the device is capable of assigning the USB data role + (USB host or USB device) for a given USB connector, such as Type-C, + Type-B(micro). See connector/usb-connector.yaml. + + role-switch-default-mode: + description: + Indicates if usb-role-switch is enabled, the device default operation + mode of controller while usb role is USB_ROLE_NONE. + $ref: /schemas/types.yaml#/definitions/string + enum: [host, peripheral] + default: peripheral + +additionalProperties: true + +examples: + - | + usb@4a030000 { + compatible = "snps,dwc3"; + reg = <0x4a030000 0xcfff>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + maximum-speed = "super-speed"; + dr_mode = "otg"; + phy_type = "utmi_wide"; + otg-rev = <0x0200>; + adp-disable; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index b545b087b342..56853c17af66 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -9,18 +9,31 @@ title: Generic USB Host Controller Device Tree Bindings maintainers: - Greg Kroah-Hartman <gregkh@linuxfoundation.org> +allOf: + - $ref: usb.yaml# + properties: - $nodename: - pattern: "^usb(@.*)?" + companion: + description: Phandle of a companion device + $ref: /schemas/types.yaml#/definitions/phandle - phys: - $ref: /schemas/types.yaml#/definitions/phandle-array + tpl-support: description: - List of all the USB PHYs on this HCD + Indicates if the Targeted Peripheral List is supported for given + targeted hosts (non-PC hosts). + type: boolean - phy-names: - description: - Name specifier for the USB PHY + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^.*@[0-9a-f]{1,2}$": + description: The hard wired USB devices + type: object + $ref: /usb/usb-device.yaml additionalProperties: true @@ -29,4 +42,11 @@ examples: usb { phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb"; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + }; }; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt deleted file mode 100644 index 0c5cff84a969..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ /dev/null @@ -1,41 +0,0 @@ -USB xHCI controllers - -Required properties: - - compatible: should be one or more of - - - "generic-xhci" for generic XHCI device - - "marvell,armada3700-xhci" for Armada 37xx SoCs - - "marvell,armada-375-xhci" for Armada 375 SoCs - - "marvell,armada-380-xhci" for Armada 38x SoCs - - "brcm,bcm7445-xhci" for Broadcom STB SoCs with XHCI - - "xhci-platform" (deprecated) - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - - - reg: should contain address and length of the standard XHCI - register set for the device. - - interrupts: one XHCI interrupt should be described here. - -Optional properties: - - clocks: reference to the clocks - - clock-names: mandatory if there is a second clock, in this case - the name must be "core" for the first clock and "reg" for the - second one - - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - - usb3-lpm-capable: determines if platform is USB3 LPM capable - - quirk-broken-port-ped: set if the controller has broken port disable mechanism - - imod-interval-ns: default interrupt moderation interval is 5000ns - - phys : see usb-hcd.yaml in the current directory - -additionally the properties from usb-hcd.yaml (in the current directory) are -supported. - - -Example: - usb@f0931000 { - compatible = "generic-xhci"; - reg = <0xf0931000 0x8c8>; - interrupts = <0x0 0x4e 0x0>; - }; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.yaml b/Documentation/devicetree/bindings/usb/usb-xhci.yaml new file mode 100644 index 000000000000..965f87fef702 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-xhci.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-xhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic USB xHCI Controller Device Tree Bindings + +maintainers: + - Mathias Nyman <mathias.nyman@intel.com> + +allOf: + - $ref: "usb-hcd.yaml#" + +properties: + usb2-lpm-disable: + description: Indicates if we don't want to enable USB2 HW LPM + type: boolean + + usb3-lpm-capable: + description: Determines if platform is USB3 LPM capable + type: boolean + + quirk-broken-port-ped: + description: Set if the controller has broken port disable mechanism + type: boolean + + imod-interval-ns: + description: Interrupt moderation interval + default: 5000 + +additionalProperties: true + +examples: + - | + usb@f0930000 { + compatible = "generic-xhci"; + reg = <0xf0930000 0x8c8>; + interrupts = <0x0 0x4e 0x0>; + usb2-lpm-disable; + usb3-lpm-capable; + }; diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml new file mode 100644 index 000000000000..78491e66ed24 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic USB Controller Device Tree Bindings + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +select: false + +properties: + $nodename: + pattern: "^usb(@.*)?" + + phys: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of all the USB PHYs on this HCD + + phy-names: + description: + Name specifier for the USB PHY + + usb-phy: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of all the USB PHYs on this HCD to be accepted by the legacy USB + Physical Layer subsystem. + deprecated: true + + phy_type: + description: + Tells USB controllers that we want to configure the core to support a + UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected, UTMI+ low + pin interface if ULPI is specified, Serial core/PHY interconnect if + serial is specified and High-Speed Inter-Chip feature if HSIC is + selected. In case this isn't passed via DT, USB controllers should + default to HW capability. + $ref: /schemas/types.yaml#/definitions/string + enum: [utmi, utmi_wide, ulpi, serial, hsic] + + maximum-speed: + description: + Tells USB controllers we want to work up to a certain speed. In case this + isn't passed via DT, USB controllers should default to their maximum HW + capability. + $ref: /schemas/types.yaml#/definitions/string + enum: + - low-speed + - full-speed + - high-speed + - super-speed + - super-speed-plus + - super-speed-plus-gen2x1 + - super-speed-plus-gen1x2 + - super-speed-plus-gen2x2 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index b353b9816487..b796836d2ce7 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -1,7 +1,7 @@ * Freescale i.MX non-core registers Required properties: -- #index-cells: Cells used to descibe usb controller index. Should be <1> +- #index-cells: Cells used to describe usb controller index. Should be <1> - compatible: Should be one of below: "fsl,imx6q-usbmisc" for imx6q "fsl,vf610-usbmisc" for Vybrid vf610 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 041ae90b0d8f..f3134f44c80c 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -59,6 +59,8 @@ patternProperties: description: Aeroflex Gaisler AB "^al,.*": description: Annapurna Labs + "^alcatel,.*": + description: Alcatel "^allegro,.*": description: Allegro DVT "^allo,.*": @@ -311,6 +313,8 @@ patternProperties: description: Dyna-Image "^ea,.*": description: Embedded Artists AB + "^ebang,.*": + description: Zhejiang Ebang Communication Co., Ltd "^ebs-systart,.*": description: EBS-SYSTART GmbH "^ebv,.*": @@ -467,10 +471,10 @@ patternProperties: description: Hitex Development Tools "^holt,.*": description: Holt Integrated Circuits, Inc. - "^honeywell,.*": - description: Honeywell "^honestar,.*": description: Honestar Technologies Co., Ltd. + "^honeywell,.*": + description: Honeywell "^hoperun,.*": description: Jiangsu HopeRun Software Co., Ltd. "^hp,.*": @@ -581,6 +585,8 @@ patternProperties: description: Kontron S&T AG "^kosagi,.*": description: Sutajio Ko-Usagi PTE Ltd. + "^kvg,.*": + description: Kverneland Group "^kyo,.*": description: Kyocera Corporation "^lacie,.*": @@ -866,6 +872,8 @@ patternProperties: description: PLDA "^plx,.*": description: Broadcom Corporation (formerly PLX Technology) + "^ply,.*": + description: Plymovent Group BV "^pni,.*": description: PNI Sensor Corporation "^pocketbook,.*": @@ -1252,6 +1260,8 @@ patternProperties: description: Shenzhen Xunlong Software CO.,Limited "^xylon,.*": description: Xylon + "^yamaha,.*": + description: Yamaha Corporation "^yes-optoelectronics,.*": description: Yes Optoelectronics Co.,Ltd. "^ylm,.*": diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index 8e3760a3822b..b8e4118945a0 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -18,6 +18,7 @@ properties: - qcom,apss-wdt-qcs404 - qcom,apss-wdt-sc7180 - qcom,apss-wdt-sdm845 + - qcom,apss-wdt-sdx55 - qcom,apss-wdt-sm8150 - qcom,kpss-timer - qcom,kpss-wdt diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index 4e2c26cd981d..e3dfb02f0ca5 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -19,7 +19,6 @@ properties: pattern: "^watchdog(@.*|-[0-9a-f])?$" timeout-sec: - $ref: /schemas/types.yaml#/definitions/uint32 description: Contains the watchdog timeout in seconds. |