diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
207 files changed, 2108 insertions, 1818 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml index 192ded470e32..f0daf990e077 100644 --- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml @@ -67,9 +67,9 @@ patternProperties: compatible: items: - enum: - - arm,integrator-ap-syscon - - arm,integrator-cp-syscon - - arm,integrator-sp-syscon + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml index d6e85d198afe..1d0b4e2bc7d2 100644 --- a/Documentation/devicetree/bindings/arm/arm,realview.yaml +++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml @@ -55,20 +55,20 @@ properties: compatible: oneOf: - items: - - const: arm,realview-eb-soc - - const: simple-bus + - const: arm,realview-eb-soc + - const: simple-bus - items: - - const: arm,realview-pb1176-soc - - const: simple-bus + - const: arm,realview-pb1176-soc + - const: simple-bus - items: - - const: arm,realview-pb11mp-soc - - const: simple-bus + - const: arm,realview-pb11mp-soc + - const: simple-bus - items: - - const: arm,realview-pba8-soc - - const: simple-bus + - const: arm,realview-pba8-soc + - const: simple-bus - items: - - const: arm,realview-pbx-soc - - const: simple-bus + - const: arm,realview-pbx-soc + - const: simple-bus patternProperties: "^.*syscon@[0-9a-f]+$": @@ -79,35 +79,35 @@ properties: compatible: oneOf: - items: - - const: arm,realview-eb11mp-revb-syscon - - const: arm,realview-eb-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-eb11mp-revb-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-eb11mp-revc-syscon - - const: arm,realview-eb-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-eb11mp-revc-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-eb-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-pb1176-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-pb1176-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-pb11mp-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-pb11mp-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-pba8-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-pba8-syscon + - const: syscon + - const: simple-mfd - items: - - const: arm,realview-pbx-syscon - - const: syscon - - const: simple-mfd + - const: arm,realview-pbx-syscon + - const: syscon + - const: simple-mfd required: - compatible diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index a3420c81cf35..26829a803fda 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -165,10 +165,10 @@ patternProperties: compatible: oneOf: - items: - - enum: - - arm,vexpress,v2m-p1 - - arm,vexpress,v2p-p1 - - const: simple-bus + - enum: + - arm,vexpress,v2m-p1 + - arm,vexpress,v2p-p1 + - const: simple-bus - const: simple-bus motherboard: type: object @@ -186,8 +186,8 @@ patternProperties: compatible: items: - enum: - - arm,vexpress,v2m-p1 - - arm,vexpress,v2p-p1 + - arm,vexpress,v2m-p1 + - arm,vexpress,v2p-p1 - const: simple-bus arm,v2m-memory-map: description: This describes the memory map type. diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml index b5ef2666e6b2..497600a2ffb9 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml @@ -15,7 +15,7 @@ properties: compatible: items: - enum: - - brcm,bcm28155-ap + - brcm,bcm28155-ap - const: brcm,bcm11351 ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml index aafbd6a27708..e0ee931723dc 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml @@ -15,7 +15,7 @@ properties: compatible: items: - enum: - - brcm,bcm21664-garnet + - brcm,bcm21664-garnet - const: brcm,bcm21664 ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml index c4b4efd28a55..40d12ea56e54 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml @@ -15,7 +15,7 @@ properties: compatible: items: - enum: - - brcm,bcm23550-sparrow + - brcm,bcm23550-sparrow - const: brcm,bcm23550 ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml index fe111e72dac3..9ba7b16e1fc4 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Broadcom Cygnus device tree bindings maintainers: - - Ray Jui <rjui@broadcom.com> - - Scott Branden <sbranden@broadcom.com> + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> properties: $nodename: @@ -16,14 +16,14 @@ properties: compatible: items: - enum: - - brcm,bcm11300 - - brcm,bcm11320 - - brcm,bcm11350 - - brcm,bcm11360 - - brcm,bcm58300 - - brcm,bcm58302 - - brcm,bcm58303 - - brcm,bcm58305 + - brcm,bcm11300 + - brcm,bcm11320 + - brcm,bcm11350 + - brcm,bcm11360 + - brcm,bcm58300 + - brcm,bcm58302 + - brcm,bcm58303 + - brcm,bcm58305 - const: brcm,cygnus ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml index 1158f49b0b83..ae614b6722c2 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml @@ -21,7 +21,7 @@ properties: compatible: items: - enum: - - ubnt,unifi-switch8 + - ubnt,unifi-switch8 - const: brcm,bcm53342 - const: brcm,hr2 diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml index 2451704f87f0..0749adf94c28 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml @@ -16,8 +16,8 @@ properties: compatible: items: - enum: - - brcm,ns2-svk - - brcm,ns2-xmc + - brcm,ns2-svk + - brcm,ns2-xmc - const: brcm,ns2 ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml index fe364cebf57f..8c2cacb2bb4f 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -24,13 +24,13 @@ properties: compatible: items: - enum: - - brcm,bcm58522 - - brcm,bcm58525 - - brcm,bcm58535 - - brcm,bcm58622 - - brcm,bcm58623 - - brcm,bcm58625 - - brcm,bcm88312 + - brcm,bcm58522 + - brcm,bcm58525 + - brcm,bcm58535 + - brcm,bcm58622 + - brcm,bcm58623 + - brcm,bcm58625 + - brcm,bcm88312 - const: brcm,nsp ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml index 4ad2b2124ab4..c13cb96545a2 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml @@ -16,9 +16,9 @@ properties: compatible: items: - enum: - - brcm,bcm958742k - - brcm,bcm958742t - - brcm,bcm958802a802x + - brcm,bcm958742k + - brcm,bcm958742t + - brcm,bcm958802a802x - const: brcm,stingray ... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml index c5b6f31c20b9..ccdf9f99cb2b 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml @@ -15,8 +15,8 @@ properties: compatible: items: - enum: - - brcm,vulcan-eval - - cavium,thunderx2-cn9900 + - brcm,vulcan-eval + - cavium,thunderx2-cn9900 - const: brcm,vulcan-soc ... diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index b48ed875eb8e..17e4f20c8d39 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -10,6 +10,15 @@ maintainers: - Eric Anholt <eric@anholt.net> - Stefan Wahren <wahrenst@gmx.net> +select: + properties: + compatible: + contains: + const: raspberrypi,bcm2835-firmware + + required: + - compatible + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml index 17df5cd12d8d..e42ff69d8bfb 100644 --- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -82,12 +82,12 @@ properties: compatible: oneOf: - items: - - const: arm,coresight-cti - - const: arm,primecell + - const: arm,coresight-cti + - const: arm,primecell - items: - - const: arm,coresight-cti-v8-arch - - const: arm,coresight-cti - - const: arm,primecell + - const: arm,coresight-cti-v8-arch + - const: arm,coresight-cti + - const: arm,primecell reg: maxItems: 1 @@ -191,16 +191,16 @@ patternProperties: anyOf: - required: - - arm,trig-in-sigs + - arm,trig-in-sigs - required: - - arm,trig-out-sigs + - arm,trig-out-sigs oneOf: - required: - - arm,trig-conn-name + - arm,trig-conn-name - required: - - cpu + - cpu - required: - - arm,cs-dev-assoc + - arm,cs-dev-assoc required: - reg diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 40f692c846f0..1222bf1831fa 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -330,8 +330,8 @@ if: - enable-method then: - required: - - secondary-boot-reg + required: + - secondary-boot-reg required: - device_type diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index f63895c8ce2d..6da9d734cdb7 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -273,8 +273,8 @@ properties: - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board - kontron,imx6ull-n6411-som # Kontron N6411 SOM - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board - const: fsl,imx6ull - description: Kontron N6411 S Board @@ -312,9 +312,12 @@ properties: - toradex,colibri-imx7d # Colibri iMX7 Dual Module - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module - - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on Aster Carrier Board - - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3 - - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on + # Aster Carrier Board + - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on + # Colibri Evaluation Board V3 + - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on + # Colibri Evaluation Board V3 - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml index 4d925785f504..06a7b05f435f 100644 --- a/Documentation/devicetree/bindings/arm/intel,keembay.yaml +++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml @@ -14,6 +14,6 @@ properties: compatible: items: - enum: - - intel,keembay-evm + - intel,keembay-evm - const: intel,keembay ... diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index e271c4682ebc..1af30174b2d0 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -17,22 +17,22 @@ properties: compatible: oneOf: - items: - - enum: - - mediatek,mt2701-pericfg - - mediatek,mt2712-pericfg - - mediatek,mt6765-pericfg - - mediatek,mt7622-pericfg - - mediatek,mt7629-pericfg - - mediatek,mt8135-pericfg - - mediatek,mt8173-pericfg - - mediatek,mt8183-pericfg - - mediatek,mt8516-pericfg - - const: syscon + - enum: + - mediatek,mt2701-pericfg + - mediatek,mt2712-pericfg + - mediatek,mt6765-pericfg + - mediatek,mt7622-pericfg + - mediatek,mt7629-pericfg + - mediatek,mt8135-pericfg + - mediatek,mt8173-pericfg + - mediatek,mt8183-pericfg + - mediatek,mt8516-pericfg + - const: syscon - items: - # Special case for mt7623 for backward compatibility - - const: mediatek,mt7623-pericfg - - const: mediatek,mt2701-pericfg - - const: syscon + # Special case for mt7623 for backward compatibility + - const: mediatek,mt7623-pericfg + - const: mediatek,mt2701-pericfg + - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml index 68b0131a31d0..37ba3337f944 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml @@ -19,7 +19,7 @@ description: | reported to the APB terminator (APB Errors Handler Block). allOf: - - $ref: /schemas/simple-bus.yaml# + - $ref: /schemas/simple-bus.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml index 29e1aaea132b..0bee4694578a 100644 --- a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml @@ -23,7 +23,7 @@ description: | accessible by means of the Baikal-T1 System Controller. allOf: - - $ref: /schemas/simple-bus.yaml# + - $ref: /schemas/simple-bus.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt deleted file mode 100644 index 6165b6ddb1a9..000000000000 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt +++ /dev/null @@ -1,125 +0,0 @@ -Binding for IDT VersaClock 5,6 programmable i2c clock generators. - -The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock -generators providing from 3 to 12 output clocks. - -==I2C device node== - -Required properties: -- compatible: shall be one of - "idt,5p49v5923" - "idt,5p49v5925" - "idt,5p49v5933" - "idt,5p49v5935" - "idt,5p49v6901" - "idt,5p49v6965" -- reg: i2c device address, shall be 0x68 or 0x6a. -- #clock-cells: from common clock binding; shall be set to 1. -- clocks: from common clock binding; list of parent clock handles, - - 5p49v5923 and - 5p49v5925 and - 5p49v6901: (required) either or both of XTAL or CLKIN - reference clock. - - 5p49v5933 and - - 5p49v5935: (optional) property not present (internal - Xtal used) or CLKIN reference - clock. -- clock-names: from common clock binding; clock input names, can be - - 5p49v5923 and - 5p49v5925 and - 5p49v6901: (required) either or both of "xin", "clkin". - - 5p49v5933 and - - 5p49v5935: (optional) property not present or "clkin". - -For all output ports, a corresponding, optional child node named OUT1, -OUT2, etc. can represent a each output, and the node can be used to -specify the following: - -- itd,mode: can be one of the following: - - VC5_LVPECL - - VC5_CMOS - - VC5_HCSL33 - - VC5_LVDS - - VC5_CMOS2 - - VC5_CMOSD - - VC5_HCSL25 - -- idt,voltage-microvolts: can be one of the following - - 1800000 - - 2500000 - - 3300000 -- idt,slew-percent: Percent of normal, can be one of - - 80 - - 85 - - 90 - - 100 - -==Mapping between clock specifier and physical pins== - -When referencing the provided clock in the DT using phandle and -clock specifier, the following mapping applies: - -5P49V5923: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT2 - -5P49V5933: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT4 - -5P49V5925 and -5P49V5935: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT2 - 3 -- OUT3 - 4 -- OUT4 - -5P49V6901: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT2 - 3 -- OUT3 - 4 -- OUT4 - -==Example== - -/* 25MHz reference crystal */ -ref25: ref25m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; -}; - -i2c-master-node { - - /* IDT 5P49V5923 i2c clock generator */ - vc5: clock-generator@6a { - compatible = "idt,5p49v5923"; - reg = <0x6a>; - #clock-cells = <1>; - - /* Connect XIN input to 25MHz reference */ - clocks = <&ref25m>; - clock-names = "xin"; - - OUT1 { - itd,mode = <VC5_CMOS>; - idt,voltage-microvolts = <1800000>; - idt,slew-percent = <80>; - }; - OUT2 { - ... - }; - ... - }; -}; - -/* Consumer referencing the 5P49V5923 pin OUT1 */ -consumer { - ... - clocks = <&vc5 1>; - ... -} diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml new file mode 100644 index 000000000000..28c6461b9a9a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators + +description: | + The IDT VersaClock 5 and VersaClock 6 are programmable I2C + clock generators providing from 3 to 12 output clocks. + + When referencing the provided clock in the DT using phandle and clock + specifier, the following mapping applies: + + - 5P49V5923: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + + - 5P49V5933: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT4 + + - other parts: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + 3 -- OUT3 + 4 -- OUT4 + +maintainers: + - Luca Ceresoli <luca@lucaceresoli.net> + +properties: + compatible: + enum: + - idt,5p49v5923 + - idt,5p49v5925 + - idt,5p49v5933 + - idt,5p49v5935 + - idt,5p49v6901 + - idt,5p49v6965 + + reg: + description: I2C device address + enum: [ 0x68, 0x6a ] + + '#clock-cells': + const: 1 + +patternProperties: + "^OUT[1-4]$": + type: object + description: + Description of one of the outputs (OUT1..OUT4). See "Clock1 Output + Configuration" in the Versaclock 5/6/6E Family Register Description + and Programming Guide. + properties: + idt,mode: + description: + The output drive mode. Values defined in dt-bindings/clk/versaclock.h + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 6 + idt,voltage-microvolt: + description: The output drive voltage. + enum: [ 1800000, 2500000, 3300000 ] + idt,slew-percent: + description: The Slew rate control for CMOS single-ended. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 80, 85, 90, 100 ] + +required: + - compatible + - reg + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + enum: + - idt,5p49v5933 + - idt,5p49v5935 + then: + # Devices with builtin crystal + optional external input + properties: + clock-names: + const: clkin + clocks: + maxItems: 1 + else: + # Devices without builtin crystal + properties: + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: [ xin, clkin ] + clocks: + minItems: 1 + maxItems: 2 + required: + - clock-names + - clocks + +examples: + - | + #include <dt-bindings/clk/versaclock.h> + + /* 25MHz reference crystal */ + ref25: ref25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + /* IDT 5P49V5923 I2C clock generator */ + vc5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + + /* Connect XIN input to 25MHz reference */ + clocks = <&ref25m>; + clock-names = "xin"; + + OUT1 { + idt,drive-mode = <VC5_CMOSD>; + idt,voltage-microvolts = <1800000>; + idt,slew-percent = <80>; + }; + + OUT4 { + idt,drive-mode = <VC5_LVDS>; + }; + }; + }; + + /* Consumer referencing the 5P49V5923 pin OUT1 */ + consumer { + /* ... */ + clocks = <&vc5 1>; + /* ... */ + }; + +... diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml index a952d5811823..5dd7ea8a78e4 100644 --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml @@ -47,12 +47,12 @@ properties: compatible: items: - enum: - - ingenic,jz4740-cgu - - ingenic,jz4725b-cgu - - ingenic,jz4770-cgu - - ingenic,jz4780-cgu - - ingenic,x1000-cgu - - ingenic,x1830-cgu + - ingenic,jz4740-cgu + - ingenic,jz4725b-cgu + - ingenic,jz4770-cgu + - ingenic,jz4780-cgu + - ingenic,x1000-cgu + - ingenic,x1830-cgu - const: simple-mfd minItems: 1 @@ -68,8 +68,8 @@ properties: items: - const: ext - enum: - - rtc - - osc32k # Different name, same clock + - rtc + - osc32k # Different name, same clock assigned-clocks: minItems: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml index 8a0c576ba8b3..df943c4c3234 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml @@ -1,23 +1,31 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/clock/qcom,sdm845-gpucc.yaml# +$id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Graphics Clock & Reset Controller Binding for SDM845 +title: Qualcomm Graphics Clock & Reset Controller Binding maintainers: - Taniya Das <tdas@codeaurora.org> description: | Qualcomm graphics clock control module which supports the clocks, resets and - power domains on SDM845. + power domains on SDM845/SC7180/SM8150/SM8250. - See also dt-bindings/clock/qcom,gpucc-sdm845.h. + See also: + dt-bindings/clock/qcom,gpucc-sdm845.h + dt-bindings/clock/qcom,gpucc-sc7180.h + dt-bindings/clock/qcom,gpucc-sm8150.h + dt-bindings/clock/qcom,gpucc-sm8250.h properties: compatible: - const: qcom,sdm845-gpucc + enum: + - qcom,sdm845-gpucc + - qcom,sc7180-gpucc + - qcom,sm8150-gpucc + - qcom,sm8250-gpucc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index 1b16a863b355..af32dee14fc6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -65,7 +65,7 @@ properties: protected-clocks: description: - Protected clock specifier list as per common clock binding + Protected clock specifier list as per common clock binding vdd-gfx-supply: description: diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml index d673edeed98d..a20cb10636dd 100644 --- a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- -$id: http://devicetree.org/schemas/clock/qcom,kryocc.yaml# +$id: http://devicetree.org/schemas/clock/qcom,msm8996-apcc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm clock controller for MSM8996 CPUs @@ -46,11 +46,9 @@ required: additionalProperties: false examples: - # Example for msm8996 - | kryocc: clock-controller@6400000 { compatible = "qcom,msm8996-apcc"; reg = <0x6400000 0x90000>; #clock-cells = <1>; - }; -... + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml deleted file mode 100644 index fe08461fce05..000000000000 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml +++ /dev/null @@ -1,74 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/qcom,sc7180-gpucc.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Graphics Clock & Reset Controller Binding for SC7180 - -maintainers: - - Taniya Das <tdas@codeaurora.org> - -description: | - Qualcomm graphics clock control module which supports the clocks, resets and - power domains on SC7180. - - See also dt-bindings/clock/qcom,gpucc-sc7180.h. - -properties: - compatible: - const: qcom,sc7180-gpucc - - clocks: - items: - - description: Board XO source - - description: GPLL0 main branch source - - description: GPLL0 div branch source - - clock-names: - items: - - const: bi_tcxo - - const: gcc_gpu_gpll0_clk_src - - const: gcc_gpu_gpll0_div_clk_src - - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - -required: - - compatible - - reg - - clocks - - clock-names - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sc7180.h> - #include <dt-bindings/clock/qcom,rpmh.h> - clock-controller@5090000 { - compatible = "qcom,sc7180-gpucc"; - reg = <0x05090000 0x9000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; - clock-names = "bi_tcxo", - "gcc_gpu_gpll0_clk_src", - "gcc_gpu_gpll0_div_clk_src"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; -... diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml new file mode 100644 index 000000000000..c54172fbf29f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core Clock Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm LPASS core clock control module which supports the clocks and + power domains on SC7180. + + See also: + - dt-bindings/clock/qcom,lpasscorecc-sc7180.h + +properties: + compatible: + enum: + - qcom,sc7180-lpasshm + - qcom,sc7180-lpasscorecc + + clocks: + items: + - description: gcc_lpass_sway clock from GCC + - description: Board XO source + + clock-names: + items: + - const: iface + - const: bi_tcxo + + power-domains: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + minItems: 1 + items: + - description: lpass core cc register + - description: lpass audio cc register + + reg-names: + items: + - const: lpass_core_cc + - const: lpass_audio_cc + +if: + properties: + compatible: + contains: + const: qcom,sc7180-lpasshm +then: + properties: + reg: + maxItems: 1 + +else: + properties: + reg: + minItems: 2 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h> + clock-controller@63000000 { + compatible = "qcom,sc7180-lpasshm"; + reg = <0x63000000 0x28>; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h> + clock-controller@62d00000 { + compatible = "qcom,sc7180-lpasscorecc"; + reg = <0x62d00000 0x50000>, <0x62780000 0x30000>; + reg-names = "lpass_core_cc", "lpass_audio_cc"; + clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml index b83f4138f2f8..9185d101737e 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml @@ -19,15 +19,15 @@ description: properties: compatible: oneOf: - - const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6 - - const: renesas,r8a7740-cpg-clocks # R-Mobile A1 - - const: renesas,r8a7778-cpg-clocks # R-Car M1 - - const: renesas,r8a7779-cpg-clocks # R-Car H1 + - const: renesas,r8a73a4-cpg-clocks # R-Mobile APE6 + - const: renesas,r8a7740-cpg-clocks # R-Mobile A1 + - const: renesas,r8a7778-cpg-clocks # R-Car M1 + - const: renesas,r8a7779-cpg-clocks # R-Car H1 - items: - - enum: - - renesas,r7s72100-cpg-clocks # RZ/A1H - - const: renesas,rz-cpg-clocks # RZ/A1 - - const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5 + - enum: + - renesas,r7s72100-cpg-clocks # RZ/A1H + - const: renesas,rz-cpg-clocks # RZ/A1 + - const: renesas,sh73a0-cpg-clocks # SH-Mobile AG5 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt index 8cb47c39ba53..bf3a9ec19241 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt @@ -4,9 +4,15 @@ The RK3288 clock controller generates and supplies clock to various controllers within the SoC and also implements a reset controller for SoC peripherals. +A revision of this SoC is available: rk3288w. The clock tree is a bit +different so another dt-compatible is available. Noticed that it is only +setting the difference but there is no automatic revision detection. This +should be performed by bootloaders. + Required Properties: -- compatible: should be "rockchip,rk3288-cru" +- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in + case of this revision of Rockchip rk3288. - reg: physical base address of the controller and length of memory mapped region. - #clock-cells: should be 1. diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index 29813873cfbc..c6d091518650 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -16,7 +16,7 @@ properties: "#clock-cells": const: 1 - compatible : + compatible: enum: - sprd,sc9863a-ap-clk - sprd,sc9863a-aon-clk diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml index 52b3cdac0bdf..f54b4e4808f0 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -32,8 +32,7 @@ properties: - const: hdmi ddc: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: > Phandle of the I2C controller used for DDC EDID probing diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml index 2c4c34e3bc29..04099f5bea3f 100644 --- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -162,14 +162,13 @@ required: additionalProperties: false examples: - - | + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/imx8mq-reset.h> - #include <dt-bindings/clock/imx8mq-clock.h> - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/reset/imx8mq-reset.h> - - mipi_dsi: mipi_dsi@30a00000 { + mipi_dsi: mipi_dsi@30a00000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx8mq-nwl-dsi"; @@ -224,4 +223,4 @@ examples: }; }; }; - }; + }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml index 98c7330a9485..baaf2a2a6fed 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -119,17 +119,17 @@ then: # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. # These clocks are optional. - enum: - - extal - - dclkin.0 - - dclkin.1 + - extal + - dclkin.0 + - dclkin.1 - enum: - - extal - - dclkin.0 - - dclkin.1 + - extal + - dclkin.0 + - dclkin.1 - enum: - - extal - - dclkin.0 - - dclkin.1 + - extal + - dclkin.0 + - dclkin.1 required: - clock-names diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 0880cbf217d5..3ddb35fcf0a2 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -18,16 +18,16 @@ properties: compatible: oneOf: - items: - - enum: - - ti,ths8134a - - ti,ths8134b - - const: ti,ths8134 + - enum: + - ti,ths8134a + - ti,ths8134b + - const: ti,ths8134 - enum: - - adi,adv7123 - - dumb-vga-dac - - ti,opa362 - - ti,ths8134 - - ti,ths8135 + - adi,adv7123 + - dumb-vga-dac + - ti,opa362 + - ti,ths8134 + - ti,ths8135 ports: type: object diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml index 85b71b1fd28a..a02039e3aca0 100644 --- a/Documentation/devicetree/bindings/display/dsi-controller.yaml +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml @@ -55,11 +55,11 @@ patternProperties: clock-master: type: boolean description: - Should be enabled if the host is being used in conjunction with - another DSI host to drive the same peripheral. Hardware supporting - such a configuration generally requires the data on both the busses - to be driven by the same clock. Only the DSI host instance - controlling this clock should contain this property. + Should be enabled if the host is being used in conjunction with + another DSI host to drive the same peripheral. Hardware supporting + such a configuration generally requires the data on both the busses + to be driven by the same clock. Only the DSI host instance + controlling this clock should contain this property. enforce-video-mode: type: boolean diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml index 66e93e563653..aecff34f505d 100644 --- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml +++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml @@ -21,9 +21,9 @@ properties: items: - enum: # Waveshare 3.5" 320x480 Color TFT LCD - - waveshare,rpi-lcd-35 + - waveshare,rpi-lcd-35 # Ozzmaker 3.5" 320x480 Color TFT LCD - - ozzmaker,piscreen + - ozzmaker,piscreen - const: ilitek,ili9486 spi-max-frequency: diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml index 5bfc33eb32c9..12064a8e7a92 100644 --- a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml +++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml @@ -13,11 +13,11 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4725b-ipu - - ingenic,jz4760-ipu + - ingenic,jz4725b-ipu + - ingenic,jz4760-ipu - items: - - const: ingenic,jz4770-ipu - - const: ingenic,jz4760-ipu + - const: ingenic,jz4770-ipu + - const: ingenic,jz4760-ipu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml index d56db1802fad..768050f30dba 100644 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml @@ -58,11 +58,11 @@ properties: - port@0 required: - - compatible - - reg - - interrupts - - clocks - - clock-names + - compatible + - reg + - interrupts + - clocks + - clock-names if: properties: diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 0b8736a9384e..53056dd02597 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -38,10 +38,10 @@ properties: clocks: items: - - description: GMU clock - - description: GPU CX clock - - description: GPU AXI clock - - description: GPU MEMNOC clock + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock clock-names: items: @@ -52,8 +52,8 @@ properties: interrupts: items: - - description: GMU HFI interrupt - - description: GMU interrupt + - description: GMU HFI interrupt + - description: GMU interrupt interrupt-names: @@ -62,14 +62,14 @@ properties: - const: gmu power-domains: - items: - - description: CX power domain - - description: GX power domain + items: + - description: CX power domain + - description: GX power domain power-domain-names: - items: - - const: cx - - const: gx + items: + - const: cx + - const: gx iommus: maxItems: 1 @@ -90,13 +90,13 @@ required: - operating-points-v2 examples: - - | - #include <dt-bindings/clock/qcom,gpucc-sdm845.h> - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> + - | + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> - gmu: gmu@506a000 { + gmu: gmu@506a000 { compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; reg = <0x506a000 0x30000>, @@ -120,4 +120,4 @@ examples: iommus = <&adreno_smmu 5>; operating-points-v2 = <&gmu_opp_table>; - }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml index 083d2b9d0c69..75a09df68ba0 100644 --- a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml +++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml @@ -24,9 +24,9 @@ properties: reg: true reset-gpios: true vdd-supply: - description: core voltage supply + description: core voltage supply vddio-supply: - description: vddio supply + description: vddio supply required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index 7f5df5851017..38bc1d1b511e 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -48,12 +48,12 @@ properties: port: true required: - - compatible - - reg - - enable-gpios - - pp1800-supply - - avdd-supply - - avee-supply + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml index aa761f697b7a..7adb83e2e8d9 100644 --- a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml +++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml @@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vdd-supply: - description: regulator that supplies the vdd voltage + description: regulator that supplies the vdd voltage required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml index 927f1eea18d2..81adb82f061d 100644 --- a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml +++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml @@ -19,11 +19,11 @@ properties: backlight: true reset-gpios: true avdd-supply: - description: regulator that supplies the AVDD voltage + description: regulator that supplies the AVDD voltage dvdd-supply: - description: regulator that supplies the DVDD voltage + description: regulator that supplies the DVDD voltage cvdd-supply: - description: regulator that supplies the CVDD voltage + description: regulator that supplies the CVDD voltage required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml index 177d48c5bd97..e89c1ea62ffa 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml @@ -25,8 +25,7 @@ properties: compatible: items: - enum: - - dlink,dir-685-panel - + - dlink,dir-685-panel - const: ilitek,ili9322 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index a39332276bab..76a9068a85dd 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -13,8 +13,7 @@ properties: compatible: items: - enum: - - bananapi,lhr050h41 - + - bananapi,lhr050h41 - const: ilitek,ili9881c backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml index a372bdc5bde1..3715882b63b6 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -21,9 +21,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vci-supply: - description: regulator that supplies the vci voltage + description: regulator that supplies the vci voltage required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index b900973b5f7b..c5944b4d636c 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -19,9 +19,9 @@ properties: backlight: true reset-gpios: true iovcc-supply: - description: regulator that supplies the iovcc voltage + description: regulator that supplies the iovcc voltage vcc-supply: - description: regulator that supplies the vcc voltage + description: regulator that supplies the vcc voltage required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml index 73d2ff3baaff..bc92928c805b 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -25,9 +25,9 @@ properties: reg: true reset-gpios: true vdd-supply: - description: regulator that supplies the vdd voltage + description: regulator that supplies the vdd voltage vddi-supply: - description: regulator that supplies the vddi voltage + description: regulator that supplies the vddi voltage backlight: true required: diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml index d766c949c622..4a36aa64c716 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml @@ -27,10 +27,10 @@ properties: compatible: items: - enum: - - motorola,droid4-panel # Panel from Motorola Droid4 phone - - nokia,himalaya # Panel from Nokia N950 phone - - tpo,taal # Panel from OMAP4 SDP board - - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback + - motorola,droid4-panel # Panel from Motorola Droid4 phone + - nokia,himalaya # Panel from Nokia N950 phone + - tpo,taal # Panel from OMAP4 SDP board + - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index 182c19cb7fdd..9bf592dc3033 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -59,7 +59,7 @@ description: | properties: clock-frequency: - description: Panel clock in Hz + description: Panel clock in Hz hactive: $ref: /schemas/types.yaml#/definitions/uint32 @@ -200,15 +200,15 @@ properties: description: Enable double clock mode required: - - clock-frequency - - hactive - - vactive - - hfront-porch - - hback-porch - - hsync-len - - vfront-porch - - vback-porch - - vsync-len + - clock-frequency + - hactive + - vactive + - hfront-porch + - hback-porch + - hsync-len + - vfront-porch + - vback-porch + - vsync-len additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml index a35ba16fc000..39477793d289 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml @@ -10,8 +10,8 @@ maintainers: - Philippe CORNU <philippe.cornu@st.com> description: | - The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD - panel connected using a MIPI-DSI video interface. + The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD + panel connected using a MIPI-DSI video interface. allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml index 7a685d0428b3..44ce98f68705 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -18,9 +18,9 @@ properties: reg: true reset-gpios: true vdd3-supply: - description: core voltage supply + description: core voltage supply vci-supply: - description: voltage supply for analog circuits + description: voltage supply for analog circuits required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index b36f39f6b233..076b057b4af5 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Visionox model RM69299 Panels Device Tree Bindings. maintainers: - - Harigovindan P <harigovi@codeaurora.org> + - Harigovindan P <harigovi@codeaurora.org> description: | This binding is for display panels using a Visionox RM692999 panel. diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index 3be76d15bf6c..69cc7e8bf15a 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -45,7 +45,7 @@ properties: phy-dsi-supply: description: - Phandle of the regulator that provides the supply voltage. + Phandle of the regulator that provides the supply voltage. ports: type: object @@ -147,4 +147,3 @@ examples: ... - diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml index bbd76591c180..173730d56334 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -78,7 +78,7 @@ properties: - const: vp4 interrupts: - items: + items: - description: common_m DSS Master common - description: common_s0 DSS Shared common 0 - description: common_s1 DSS Shared common 1 diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml index 3bbe9521c0bc..4cc011230153 100644 --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml @@ -56,8 +56,8 @@ properties: memory-region: description: - phandle to a node describing reserved memory (System RAM memory) - used by DSP (see bindings/reserved-memory/reserved-memory.txt) + phandle to a node describing reserved memory (System RAM memory) + used by DSP (see bindings/reserved-memory/reserved-memory.txt) maxItems: 1 required: diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index c9534d2164a2..822975dbeafa 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -177,10 +177,10 @@ properties: dependencies: # 'vendor,bool-property' is only allowed when 'vendor,string-array-property' # is present - vendor,bool-property: [ vendor,string-array-property ] + vendor,bool-property: [ 'vendor,string-array-property' ] # Expressing 2 properties in both orders means all of the set of properties # must be present or none of them. - vendor,string-array-property: [ vendor,bool-property ] + vendor,string-array-property: [ 'vendor,bool-property' ] required: - compatible diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml index 893d81e54caa..b26d4b4be743 100644 --- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: IBM FSI-attached SPI controllers maintainers: - - Eddie James <eajames@linux.ibm.com> + - Eddie James <eajames@linux.ibm.com> description: | This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml index 4f2cbd8307a7..c213cb9ddb9f 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml @@ -19,10 +19,8 @@ properties: reg: items: - - description: the I/O address containing the GPIO controller - registers. - - description: the I/O address containing the Chip Common A interrupt - registers. + - description: the I/O address containing the GPIO controller registers. + - description: the I/O address containing the Chip Common A interrupt registers. gpio-controller: true diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml index 397d9383d15a..3ad229307bd5 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml @@ -13,39 +13,39 @@ properties: compatible: oneOf: - items: - - enum: - - renesas,gpio-r8a7778 # R-Car M1 - - renesas,gpio-r8a7779 # R-Car H1 - - const: renesas,rcar-gen1-gpio # R-Car Gen1 + - enum: + - renesas,gpio-r8a7778 # R-Car M1 + - renesas,gpio-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-gpio # R-Car Gen1 - items: - - enum: - - renesas,gpio-r8a7742 # RZ/G1H - - renesas,gpio-r8a7743 # RZ/G1M - - renesas,gpio-r8a7744 # RZ/G1N - - renesas,gpio-r8a7745 # RZ/G1E - - renesas,gpio-r8a77470 # RZ/G1C - - renesas,gpio-r8a7790 # R-Car H2 - - renesas,gpio-r8a7791 # R-Car M2-W - - renesas,gpio-r8a7792 # R-Car V2H - - renesas,gpio-r8a7793 # R-Car M2-N - - renesas,gpio-r8a7794 # R-Car E2 - - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1 + - enum: + - renesas,gpio-r8a7742 # RZ/G1H + - renesas,gpio-r8a7743 # RZ/G1M + - renesas,gpio-r8a7744 # RZ/G1N + - renesas,gpio-r8a7745 # RZ/G1E + - renesas,gpio-r8a77470 # RZ/G1C + - renesas,gpio-r8a7790 # R-Car H2 + - renesas,gpio-r8a7791 # R-Car M2-W + - renesas,gpio-r8a7792 # R-Car V2H + - renesas,gpio-r8a7793 # R-Car M2-N + - renesas,gpio-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1 - items: - - enum: - - renesas,gpio-r8a774a1 # RZ/G2M - - renesas,gpio-r8a774b1 # RZ/G2N - - renesas,gpio-r8a774c0 # RZ/G2E - - renesas,gpio-r8a7795 # R-Car H3 - - renesas,gpio-r8a7796 # R-Car M3-W - - renesas,gpio-r8a77961 # R-Car M3-W+ - - renesas,gpio-r8a77965 # R-Car M3-N - - renesas,gpio-r8a77970 # R-Car V3M - - renesas,gpio-r8a77980 # R-Car V3H - - renesas,gpio-r8a77990 # R-Car E3 - - renesas,gpio-r8a77995 # R-Car D3 - - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2 + - enum: + - renesas,gpio-r8a774a1 # RZ/G2M + - renesas,gpio-r8a774b1 # RZ/G2N + - renesas,gpio-r8a774c0 # RZ/G2E + - renesas,gpio-r8a7795 # R-Car H3 + - renesas,gpio-r8a7796 # R-Car M3-W + - renesas,gpio-r8a77961 # R-Car M3-W+ + - renesas,gpio-r8a77965 # R-Car M3-N + - renesas,gpio-r8a77970 # R-Car V3M + - renesas,gpio-r8a77980 # R-Car V3H + - renesas,gpio-r8a77990 # R-Car E3 + - renesas,gpio-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml index e1ac6ff5a230..4843df1ddbb6 100644 --- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -26,7 +26,8 @@ properties: - description: AXI/master interface clock - description: GPU core clock - description: Shader clock (only required if GPU has feature PIPE_3D) - - description: AHB/slave interface clock (only required if GPU can gate slave interface independently) + - description: AHB/slave interface clock (only required if GPU can gate + slave interface independently) minItems: 1 maxItems: 4 diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index af35b77053df..7898b9dba5a5 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -19,7 +19,7 @@ description: |+ properties: compatible: enum: - - adi,axi-fan-control-1.00.a + - adi,axi-fan-control-1.00.a reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml index 869f2ae3d5b3..810536953177 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml @@ -20,22 +20,22 @@ properties: - const: fsl,imx1-i2c - items: - enum: - - fsl,imx25-i2c - - fsl,imx27-i2c - - fsl,imx31-i2c - - fsl,imx50-i2c - - fsl,imx51-i2c - - fsl,imx53-i2c - - fsl,imx6q-i2c - - fsl,imx6sl-i2c - - fsl,imx6sx-i2c - - fsl,imx6sll-i2c - - fsl,imx6ul-i2c - - fsl,imx7s-i2c - - fsl,imx8mq-i2c - - fsl,imx8mm-i2c - - fsl,imx8mn-i2c - - fsl,imx8mp-i2c + - fsl,imx25-i2c + - fsl,imx27-i2c + - fsl,imx31-i2c + - fsl,imx50-i2c + - fsl,imx51-i2c + - fsl,imx53-i2c + - fsl,imx6q-i2c + - fsl,imx6sl-i2c + - fsl,imx6sx-i2c + - fsl,imx6sll-i2c + - fsl,imx6ul-i2c + - fsl,imx7s-i2c + - fsl,imx8mq-i2c + - fsl,imx8mm-i2c + - fsl,imx8mn-i2c + - fsl,imx8mp-i2c - const: fsl,imx21-i2c reg: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt index 88b71c1b32c9..7f0194fdd0cc 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt @@ -14,6 +14,7 @@ Required properties: "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 "mediatek,mt8173-i2c": for MediaTek MT8173 "mediatek,mt8183-i2c": for MediaTek MT8183 + "mediatek,mt8192-i2c": for MediaTek MT8192 "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516 - reg: physical base address of the controller and dma base, length of memory mapped region. diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml index da6e8bdc4037..015885dd02d3 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml @@ -16,8 +16,8 @@ allOf: required: - mrvl,i2c-polling then: - required: - - interrupts + required: + - interrupts properties: compatible: diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index 438ae123107e..a21c359b9f02 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -72,6 +72,16 @@ wants to support one of the below features, it should adapt these bindings. this information to adapt power management to keep the arbitration awake all the time, for example. Can not be combined with 'single-master'. +- pinctrl + add extra pinctrl to configure SCL/SDA pins to GPIO function for bus + recovery, call it "gpio" or "recovery" (deprecated) state + +- scl-gpios + specify the gpio related to SCL pin. Used for GPIO bus recovery. + +- sda-gpios + specify the gpio related to SDA pin. Optional for GPIO bus recovery. + - single-master states that there is no other master active on this bus. The OS can use this information to detect a stalled bus more reliably, for example. diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml index 2ceb05ba2df5..5b5ae402f97a 100644 --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -27,6 +27,9 @@ properties: - const: allwinner,sun50i-a64-i2c - const: allwinner,sun6i-a31-i2c - items: + - const: allwinner,sun50i-a100-i2c + - const: allwinner,sun6i-a31-i2c + - items: - const: allwinner,sun50i-h6-i2c - const: allwinner,sun6i-a31-i2c diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt index a03f9f5cb378..96d869ac3839 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt @@ -10,6 +10,7 @@ Required properties: "renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC. "renesas,i2c-r8a774b1" if the device is a part of a R8A774B1 SoC. "renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC. + "renesas,i2c-r8a774e1" if the device is a part of a R8A774E1 SoC. "renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC. "renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC. "renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC. diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt index 89facb09337a..93d412832e66 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,iic.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt @@ -11,6 +11,7 @@ Required properties: - "renesas,iic-r8a774a1" (RZ/G2M) - "renesas,iic-r8a774b1" (RZ/G2N) - "renesas,iic-r8a774c0" (RZ/G2E) + - "renesas,iic-r8a774e1" (RZ/G2H) - "renesas,iic-r8a7790" (R-Car H2) - "renesas,iic-r8a7791" (R-Car M2-W) - "renesas,iic-r8a7792" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 5117ad68a584..cbb8819d7069 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -53,10 +53,10 @@ properties: standby-gpios: description: - Must be the device tree identifier of the STBY pin. This pin is used - to place the AD7606 into one of two power-down modes, Standby mode or - Shutdown mode. As the line is active low, it should be marked - GPIO_ACTIVE_LOW. + Must be the device tree identifier of the STBY pin. This pin is used + to place the AD7606 into one of two power-down modes, Standby mode or + Shutdown mode. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. maxItems: 1 adi,first-data-gpios: diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml index a0ebb4680140..cccd3033a55b 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml @@ -10,7 +10,7 @@ maintainers: - Jonathan Cameron <jic23@kernel.org> description: | - Family of simple ADCs with i2c inteface and internal references. + Family of simple ADCs with i2c inteface and internal references. properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index e6263b617941..0ca992465a21 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -24,11 +24,11 @@ properties: - const: qcom,spmi-adc-rev2 - items: - - enum: - - qcom,spmi-vadc - - qcom,spmi-adc5 - - qcom,spmi-adc-rev2 - - qcom,spmi-adc7 + - enum: + - qcom,spmi-vadc + - qcom,spmi-adc5 + - qcom,spmi-adc-rev2 + - qcom,spmi-adc7 reg: description: VADC base address in the SPMI PMIC register map @@ -97,16 +97,14 @@ patternProperties: input signal is multiplied. For example, <1 3> indicates the signal is scaled down to 1/3 of its value before ADC measurement. If property is not found default value depending on chip will be used. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array oneOf: - items: - - const: 1 - - enum: [ 1, 3, 4, 6, 20, 8, 10 ] - + - const: 1 + - enum: [ 1, 3, 4, 6, 20, 8, 10 ] - items: - - const: 10 - - const: 81 + - const: 10 + - const: 81 qcom,ratiometric: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml index bcff82a423bc..1bb76197787b 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -17,10 +17,10 @@ properties: - const: rockchip,rk3399-saradc - items: - enum: - - rockchip,px30-saradc - - rockchip,rk3308-saradc - - rockchip,rk3328-saradc - - rockchip,rv1108-saradc + - rockchip,px30-saradc + - rockchip,rk3308-saradc + - rockchip,rk3328-saradc + - rockchip,rv1108-saradc - const: rockchip,rk3399-saradc reg: diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 1c6d49685e9f..5342360e96b1 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: HMC425A 6-bit Digital Step Attenuator maintainers: -- Michael Hennerich <michael.hennerich@analog.com> -- Beniamin Bia <beniamin.bia@analog.com> + - Michael Hennerich <michael.hennerich@analog.com> + - Beniamin Bia <beniamin.bia@analog.com> description: | Digital Step Attenuator IIO device with gpio interface. diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml index 69e8931e0ae8..9a89b34bdd8f 100644 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml @@ -31,10 +31,10 @@ properties: - atlas,co2-ezo reg: - maxItems: 1 + maxItems: 1 interrupts: - maxItems: 1 + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index 58d81ca43460..82424e06be27 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -61,17 +61,17 @@ properties: const: 0 adi,range-microamp: - description: Output range of the channel. - oneOf: - - items: - - const: 0 - - const: 300000 - - items: - - const: -60000 - - const: 0 - - items: - - const: -60000 - - const: 300000 + description: Output range of the channel. + oneOf: + - items: + - const: 0 + - const: 300000 + - items: + - const: -60000 + - const: 0 + - items: + - const: -60000 + - const: 300000 channel@1: description: Represents an external channel which are @@ -84,10 +84,10 @@ properties: const: 1 adi,range-microamp: - description: Output range of the channel. - items: - - const: 0 - - enum: [ 140000, 250000 ] + description: Output range of the channel. + items: + - const: 0 + - enum: [140000, 250000] channel@2: description: Represents an external channel which are @@ -100,10 +100,10 @@ properties: const: 2 adi,range-microamp: - description: Output range of the channel. - items: - - const: 0 - - enum: [ 55000, 150000 ] + description: Output range of the channel. + items: + - const: 0 + - enum: [55000, 150000] patternProperties: "^channel@([3-5])$": @@ -116,19 +116,19 @@ patternProperties: maximum: 5 adi,range-microamp: - description: Output range of the channel. - items: - - const: 0 - - enum: [ 45000, 100000 ] + description: Output range of the channel. + items: + - const: 0 + - enum: [45000, 100000] required: -- reg -- channel@0 -- channel@1 -- channel@2 -- channel@3 -- channel@4 -- channel@5 + - reg + - channel@0 + - channel@1 + - channel@2 + - channel@3 + - channel@4 + - channel@5 examples: - | diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml index da8f2e872535..58887a4f9c15 100644 --- a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml +++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml @@ -36,15 +36,15 @@ required: additionalProperties: false examples: -- | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - light-sensor@51 { - compatible = "vishay,vcnl4200"; - reg = <0x51>; - proximity-near-level = <220>; - }; - }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@51 { + compatible = "vishay,vcnl4200"; + reg = <0x51>; + proximity-near-level = <220>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index f4393bfbf355..f0b336ac39c9 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -13,15 +13,15 @@ properties: compatible: oneOf: - enum: - - asahi-kasei,ak8975 - - asahi-kasei,ak8963 - - asahi-kasei,ak09911 - - asahi-kasei,ak09912 + - asahi-kasei,ak8975 + - asahi-kasei,ak8963 + - asahi-kasei,ak09911 + - asahi-kasei,ak09912 - enum: - - ak8975 - - ak8963 - - ak09911 - - ak09912 + - ak8975 + - ak8963 + - ak09911 + - ak09912 deprecated: true reg: diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml index 4190253336ec..51dba64037f6 100644 --- a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml @@ -39,8 +39,8 @@ properties: description: The driver current for the LED used in proximity sensing. enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000, - 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000, - 180000, 190000, 200000] + 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000, + 180000, 190000, 200000] default: 20000 required: diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 40ccbe7b5c13..0f79d9a01c49 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -307,7 +307,7 @@ patternProperties: mode. $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, - 500000, 1000000] + 500000, 1000000] adi,custom-thermistor: description: diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml index 7432c6e8cf3a..f21db81206b4 100644 --- a/Documentation/devicetree/bindings/input/imx-keypad.yaml +++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml @@ -24,19 +24,19 @@ properties: - const: fsl,imx21-kpp - items: - enum: - - fsl,imx25-kpp - - fsl,imx27-kpp - - fsl,imx31-kpp - - fsl,imx35-kpp - - fsl,imx51-kpp - - fsl,imx53-kpp - - fsl,imx50-kpp - - fsl,imx6q-kpp - - fsl,imx6sx-kpp - - fsl,imx6sl-kpp - - fsl,imx6sll-kpp - - fsl,imx6ul-kpp - - fsl,imx7d-kpp + - fsl,imx25-kpp + - fsl,imx27-kpp + - fsl,imx31-kpp + - fsl,imx35-kpp + - fsl,imx51-kpp + - fsl,imx53-kpp + - fsl,imx50-kpp + - fsl,imx6q-kpp + - fsl,imx6sx-kpp + - fsl,imx6sl-kpp + - fsl,imx6sll-kpp + - fsl,imx6ul-kpp + - fsl,imx7d-kpp - const: fsl,imx21-kpp reg: diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml index 8c73e5264312..3225c8d1fdaf 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml @@ -51,7 +51,7 @@ required: - touchscreen-max-pressure examples: -- | + - | #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 024b262a2ef7..4ce109476a0e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -20,11 +20,11 @@ maintainers: allOf: - $ref: touchscreen.yaml# - if: - properties: - compatible: - contains: - enum: - - evervision,ev-ft5726 + properties: + compatible: + contains: + enum: + - evervision,ev-ft5726 then: properties: diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index e81cfa56f25a..da5b0d87e16d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -35,9 +35,8 @@ properties: maxItems: 1 irq-gpios: - description: GPIO pin used for IRQ. - The driver uses the interrupt gpio pin as - output to reset the device. + description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin + as output to reset the device. maxItems: 1 reset-gpios: diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index d7dac16a3960..36dc7b56a453 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -33,8 +33,8 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-min-pressure: - description: minimum pressure on the touchscreen to be achieved in order for the - touchscreen driver to report a touch event. + description: minimum pressure on the touchscreen to be achieved in order + for the touchscreen driver to report a touch event. $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-fuzz-x: @@ -46,13 +46,13 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-fuzz-pressure: - description: pressure noise value of the absolute input device (arbitrary range - dependent on the controller) + description: pressure noise value of the absolute input device (arbitrary + range dependent on the controller) $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-average-samples: - description: Number of data samples which are averaged for each read (valid values - dependent on the controller) + description: Number of data samples which are averaged for each read (valid + values dependent on the controller) $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-inverted-x: diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml index ff09550ad959..a8873739d61a 100644 --- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml +++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml @@ -25,17 +25,17 @@ properties: compatible: oneOf: - items: - - enum: - - fsl,imx8mn-nic - - fsl,imx8mm-nic - - fsl,imx8mq-nic - - const: fsl,imx8m-nic + - enum: + - fsl,imx8mn-nic + - fsl,imx8mm-nic + - fsl,imx8mq-nic + - const: fsl,imx8m-nic - items: - - enum: - - fsl,imx8mn-noc - - fsl,imx8mm-noc - - fsl,imx8mq-noc - - const: fsl,imx8m-noc + - enum: + - fsl,imx8mn-noc + - fsl,imx8mm-noc + - fsl,imx8mq-noc + - const: fsl,imx8m-noc - const: fsl,imx8m-nic reg: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml index d01bac80d416..8659048f92a7 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7180.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/interconnect/qcom,sc7180.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm SC7180 Network-On-Chip Interconnect +title: Qualcomm SC7180 Network-On-Chip Interconnect maintainers: - Odelu Kukatla <okukatla@codeaurora.org> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml index 74536747b51d..dab17c0716ce 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/interconnect/qcom,sdm845.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm SDM845 Network-On-Chip Interconnect +title: Qualcomm SDM845 Network-On-Chip Interconnect maintainers: - Georgi Djakov <georgi.djakov@linaro.org> diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml index 96f8803ff4e6..06889963dfb7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -42,8 +42,8 @@ properties: - items: - const: arm,gic-400 - enum: - - arm,cortex-a15-gic - - arm,cortex-a7-gic + - arm,cortex-a15-gic + - arm,cortex-a7-gic - items: - const: arm,arm1176jzf-devchip-gic diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml index 28b27e1a6e9d..02a3cf470518 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml @@ -16,20 +16,20 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-intc - - ingenic,jz4760-intc - - ingenic,jz4780-intc + - ingenic,jz4740-intc + - ingenic,jz4760-intc + - ingenic,jz4780-intc - items: - - enum: - - ingenic,jz4775-intc - - ingenic,jz4770-intc - - const: ingenic,jz4760-intc + - enum: + - ingenic,jz4775-intc + - ingenic,jz4770-intc + - const: ingenic,jz4760-intc - items: - - const: ingenic,x1000-intc - - const: ingenic,jz4780-intc + - const: ingenic,x1000-intc + - const: ingenic,jz4780-intc - items: - - const: ingenic,jz4725b-intc - - const: ingenic,jz4740-intc + - const: ingenic,jz4725b-intc + - const: ingenic,jz4740-intc "#interrupt-cells": const: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml index 9f0eb3addac4..ce6aaff15214 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml @@ -42,14 +42,13 @@ properties: Specifies the list of CPU interrupt vectors to which the GIC may not route interrupts. This property is ignored if the CPU is started in EIC mode. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 1 - maxItems: 6 - uniqueItems: true - items: - minimum: 2 - maximum: 7 + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 1 + maxItems: 6 + uniqueItems: true + items: + minimum: 2 + maximum: 7 mti,reserved-ipi-vectors: description: | @@ -57,13 +56,12 @@ properties: It accepts two values: the 1st is the starting interrupt and the 2nd is the size of the reserved range. If not specified, the driver will allocate the last (2 * number of VPEs in the system). - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - items: - - minimum: 0 - maximum: 254 - - minimum: 2 - maximum: 254 + $ref: /schemas/types.yaml#definitions/uint32-array + items: + - minimum: 0 + maximum: 254 + - minimum: 2 + maximum: 254 timer: type: object diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt deleted file mode 100644 index 7841cb099e13..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt +++ /dev/null @@ -1,66 +0,0 @@ -Texas Instruments K3 Interrupt Aggregator -========================================= - -The Interrupt Aggregator (INTA) provides a centralized machine -which handles the termination of system events to that they can -be coherently processed by the host(s) in the system. A maximum -of 64 events can be mapped to a single interrupt. - - - Interrupt Aggregator - +-----------------------------------------+ - | Intmap VINT | - | +--------------+ +------------+ | - m ------>| | vint | bit | | 0 |.....|63| vint0 | - . | +--------------+ +------------+ | +------+ - . | . . | | HOST | -Globalevents ------>| . . |------>| IRQ | - . | . . | | CTRL | - . | . . | +------+ - n ------>| +--------------+ +------------+ | - | | vint | bit | | 0 |.....|63| vintx | - | +--------------+ +------------+ | - | | - +-----------------------------------------+ - -Configuration of these Intmap registers that maps global events to vint is done -by a system controller (like the Device Memory and Security Controller on K3 -AM654 SoC). Driver should request the system controller to get the range -of global events and vints assigned to the requesting host. Management -of these requested resources should be handled by driver and requests -system controller to map specific global event to vint, bit pair. - -Communication between the host processor running an OS and the system -controller happens through a protocol called TI System Control Interface -(TISCI protocol). For more details refer: -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TISCI Interrupt Aggregator Node: -------------------------------- -- compatible: Must be "ti,sci-inta". -- reg: Should contain registers location and length. -- interrupt-controller: Identifies the node as an interrupt controller -- msi-controller: Identifies the node as an MSI controller. -- interrupt-parent: phandle of irq parent. -- ti,sci: Phandle to TI-SCI compatible System controller node. -- ti,sci-dev-id: TISCI device ID of the Interrupt Aggregator. -- ti,sci-rm-range-vint: Array of TISCI subtype ids representing vints(inta - outputs) range within this INTA, assigned to the - requesting host context. -- ti,sci-rm-range-global-event: Array of TISCI subtype ids representing the - global events range reaching this IA and are assigned - to the requesting host context. - -Example: --------- -main_udmass_inta: interrupt-controller@33d00000 { - compatible = "ti,sci-inta"; - reg = <0x0 0x33d00000 0x0 0x100000>; - interrupt-controller; - msi-controller; - interrupt-parent = <&main_navss_intr>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <179>; - ti,sci-rm-range-vint = <0x0>; - ti,sci-rm-range-global-event = <0x1>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml new file mode 100644 index 000000000000..c7cd05656a3e --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Aggregator + +maintainers: + - Lokesh Vutla <lokeshvutla@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Aggregator (INTA) provides a centralized machine + which handles the termination of system events to that they can + be coherently processed by the host(s) in the system. A maximum + of 64 events can be mapped to a single interrupt. + + Interrupt Aggregator + +-----------------------------------------+ + | Intmap VINT | + | +--------------+ +------------+ | + m ------>| | vint | bit | | 0 |.....|63| vint0 | + . | +--------------+ +------------+ | +------+ + . | . . | | HOST | + Globalevents ------>| . . |----->| IRQ | + . | . . | | CTRL | + . | . . | +------+ + n ------>| +--------------+ +------------+ | + | | vint | bit | | 0 |.....|63| vintx | + | +--------------+ +------------+ | + | | + +-----------------------------------------+ + + Configuration of these Intmap registers that maps global events to vint is + done by a system controller (like the Device Memory and Security Controller + on AM654 SoC). Driver should request the system controller to get the range + of global events and vints assigned to the requesting host. Management + of these requested resources should be handled by driver and requests + system controller to map specific global event to vint, bit pair. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-inta + + reg: + maxItems: 1 + + interrupt-controller: true + + msi-controller: true + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTA output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for inta output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + main_udmass_inta: msi-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + interrupt-parent = <&main_navss_intr>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <179>; + ti,interrupt-ranges = <0 0 256>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt deleted file mode 100644 index 178fca08278f..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt +++ /dev/null @@ -1,82 +0,0 @@ -Texas Instruments K3 Interrupt Router -===================================== - -The Interrupt Router (INTR) module provides a mechanism to mux M -interrupt inputs to N interrupt outputs, where all M inputs are selectable -to be driven per N output. An Interrupt Router can either handle edge triggered -or level triggered interrupts and that is fixed in hardware. - - Interrupt Router - +----------------------+ - | Inputs Outputs | - +-------+ | +------+ +-----+ | - | GPIO |----------->| | irq0 | | 0 | | Host IRQ - +-------+ | +------+ +-----+ | controller - | . . | +-------+ - +-------+ | . . |----->| IRQ | - | INTA |----------->| . . | +-------+ - +-------+ | . +-----+ | - | +------+ | N | | - | | irqM | +-----+ | - | +------+ | - | | - +----------------------+ - -There is one register per output (MUXCNTL_N) that controls the selection. -Configuration of these MUXCNTL_N registers is done by a system controller -(like the Device Memory and Security Controller on K3 AM654 SoC). System -controller will keep track of the used and unused registers within the Router. -Driver should request the system controller to get the range of GIC IRQs -assigned to the requesting hosts. It is the drivers responsibility to keep -track of Host IRQs. - -Communication between the host processor running an OS and the system -controller happens through a protocol called TI System Control Interface -(TISCI protocol). For more details refer: -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TISCI Interrupt Router Node: ----------------------------- -Required Properties: -- compatible: Must be "ti,sci-intr". -- ti,intr-trigger-type: Should be one of the following: - 1: If intr supports edge triggered interrupts. - 4: If intr supports level triggered interrupts. -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value should be 2. - First cell should contain the TISCI device ID of source - Second cell should contain the interrupt source offset - within the device. -- ti,sci: Phandle to TI-SCI compatible System controller node. -- ti,sci-dst-id: TISCI device ID of the destination IRQ controller. -- ti,sci-rm-range-girq: Array of TISCI subtype ids representing the host irqs - assigned to this interrupt router. Each subtype id - corresponds to a range of host irqs. - -For more details on TISCI IRQ resource management refer: -https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html - -Example: --------- -The following example demonstrates both interrupt router node and the consumer -node(main gpio) on the AM654 SoC: - -main_intr: interrupt-controller0 { - compatible = "ti,sci-intr"; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <2>; - ti,sci = <&dmsc>; - ti,sci-dst-id = <56>; - ti,sci-rm-range-girq = <0x1>; -}; - -main_gpio0: gpio@600000 { - ... - interrupt-parent = <&main_intr>; - interrupts = <57 256>, <57 257>, <57 258>, - <57 259>, <57 260>, <57 261>; - ... -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml new file mode 100644 index 000000000000..cff6a956afb4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Router + +maintainers: + - Lokesh Vutla <lokeshvutla@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Router (INTR) module provides a mechanism to mux M + interrupt inputs to N interrupt outputs, where all M inputs are selectable + to be driven per N output. An Interrupt Router can either handle edge + triggered or level triggered interrupts and that is fixed in hardware. + + Interrupt Router + +----------------------+ + | Inputs Outputs | + +-------+ | +------+ +-----+ | + | GPIO |----------->| | irq0 | | 0 | | Host IRQ + +-------+ | +------+ +-----+ | controller + | . . | +-------+ + +-------+ | . . |----->| IRQ | + | INTA |----------->| . . | +-------+ + +-------+ | . +-----+ | + | +------+ | N | | + | | irqM | +-----+ | + | +------+ | + | | + +----------------------+ + + There is one register per output (MUXCNTL_N) that controls the selection. + Configuration of these MUXCNTL_N registers is done by a system controller + (like the Device Memory and Security Controller on K3 AM654 SoC). System + controller will keep track of the used and unused registers within the Router. + Driver should request the system controller to get the range of GIC IRQs + assigned to the requesting hosts. It is the drivers responsibility to keep + track of Host IRQs. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-intr + + ti,intr-trigger-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4] + description: | + Should be one of the following. + 1 = If intr supports edge triggered interrupts. + 4 = If intr supports level triggered interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: | + The 1st cell should contain interrupt router input hw number. + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTR output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for intr output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - ti,intr-trigger-type + - interrupt-controller + - '#interrupt-cells' + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +examples: + - | + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <131>; + ti,interrupt-ranges = <0 360 32>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml index 32e0896c6bc1..47938e372987 100644 --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml @@ -79,7 +79,8 @@ properties: description: | kHz; switching frequency. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ] + enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, + 2400, 3200, 4800, 9600 ] qcom,ovp: description: | diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml index 3b35eb5ac3f9..8a3470b64d06 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -29,12 +29,12 @@ properties: - const: fsl,imx8-mu-scu - items: - enum: - - fsl,imx7s-mu - - fsl,imx8mq-mu - - fsl,imx8mm-mu - - fsl,imx8mn-mu - - fsl,imx8mp-mu - - fsl,imx8qxp-mu + - fsl,imx7s-mu + - fsl,imx8mq-mu + - fsl,imx8mm-mu + - fsl,imx8mn-mu + - fsl,imx8mp-mu + - fsl,imx8qxp-mu - const: fsl,imx6sx-mu - description: To communicate with i.MX8 SCU with fast IPC items: diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml index 4ac2123d9193..168beeb7e9f7 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -24,7 +24,7 @@ properties: compatible: items: - enum: - - qcom,sm8250-ipcc + - qcom,sm8250-ipcc - const: qcom,ipcc reg: diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml index 75196d11da58..a258832d520c 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml @@ -20,8 +20,8 @@ properties: oneOf: - const: allwinner,sun8i-a83t-de2-rotate - items: - - const: allwinner,sun50i-a64-de2-rotate - - const: allwinner,sun8i-a83t-de2-rotate + - const: allwinner,sun50i-a64-de2-rotate + - const: allwinner,sun8i-a83t-de2-rotate reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml index 8707df613f6c..6a56214c6cfd 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml @@ -20,8 +20,8 @@ properties: oneOf: - const: allwinner,sun8i-h3-deinterlace - items: - - const: allwinner,sun50i-a64-deinterlace - - const: allwinner,sun8i-h3-deinterlace + - const: allwinner,sun50i-a64-deinterlace + - const: allwinner,sun8i-h3-deinterlace reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml index e0084b272b25..d8c54f9d9506 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml @@ -17,17 +17,17 @@ properties: compatible: items: - enum: - - adi,adv7180 - - adi,adv7180cp - - adi,adv7180st - - adi,adv7182 - - adi,adv7280 - - adi,adv7280-m - - adi,adv7281 - - adi,adv7281-m - - adi,adv7281-ma - - adi,adv7282 - - adi,adv7282-m + - adi,adv7180 + - adi,adv7180cp + - adi,adv7180st + - adi,adv7182 + - adi,adv7280 + - adi,adv7280-m + - adi,adv7281 + - adi,adv7281-m + - adi,adv7281-ma + - adi,adv7282 + - adi,adv7282-m reg: maxItems: 1 @@ -58,17 +58,16 @@ allOf: - if: properties: compatible: - items: - - enum: - - adi,adv7180 - - adi,adv7182 - - adi,adv7280 - - adi,adv7280-m - - adi,adv7281 - - adi,adv7281-m - - adi,adv7281-ma - - adi,adv7282 - - adi,adv7282-m + enum: + - adi,adv7180 + - adi,adv7182 + - adi,adv7280 + - adi,adv7280-m + - adi,adv7281 + - adi,adv7281-m + - adi,adv7281-ma + - adi,adv7282 + - adi,adv7282-m then: required: - port diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml index cb96e95d7e81..21864ab86ec4 100644 --- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml @@ -38,39 +38,36 @@ properties: dongwoon,aac-mode: description: Indication of AAC mode select. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: - - 1 # AAC2 mode(operation time# 0.48 x Tvib) - - 2 # AAC3 mode(operation time# 0.70 x Tvib) - - 3 # AAC4 mode(operation time# 0.75 x Tvib) - - 5 # AAC8 mode(operation time# 1.13 x Tvib) - default: 2 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: + - 1 # AAC2 mode(operation time# 0.48 x Tvib) + - 2 # AAC3 mode(operation time# 0.70 x Tvib) + - 3 # AAC4 mode(operation time# 0.75 x Tvib) + - 5 # AAC8 mode(operation time# 1.13 x Tvib) + default: 2 dongwoon,aac-timing: description: Number of AAC Timing count that controlled by one 6-bit period of vibration register AACT[5:0], the unit of which is 100 us. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - default: 0x20 - minimum: 0x00 - maximum: 0x3f + $ref: "/schemas/types.yaml#/definitions/uint32" + default: 0x20 + minimum: 0x00 + maximum: 0x3f dongwoon,clock-presc: description: Indication of VCM internal clock dividing rate select, as one multiple factor to calculate VCM ring periodic time Tvib. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: - - 0 # Dividing Rate - 2 - - 1 # Dividing Rate - 1 - - 2 # Dividing Rate - 1/2 - - 3 # Dividing Rate - 1/4 - - 4 # Dividing Rate - 8 - - 5 # Dividing Rate - 4 - default: 1 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: + - 0 # Dividing Rate - 2 + - 1 # Dividing Rate - 1 + - 2 # Dividing Rate - 1/2 + - 3 # Dividing Rate - 1/4 + - 4 # Dividing Rate - 8 + - 5 # Dividing Rate - 4 + default: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml index 5ad4b8c356cf..107c862a7fc7 100644 --- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms +title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms maintainers: - Jacopo Mondi <jacopo+renesas@jmondi.org> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index e7b543159d15..9ea827092fdd 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -49,7 +49,7 @@ properties: gpio-controller: true '#gpio-cells': - const: 2 + const: 2 ports: type: object diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml index 1956b2a32bf4..cde85553fd01 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml @@ -138,4 +138,5 @@ examples: }; }; }; -...
\ No newline at end of file +... + diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml index c9e068231d4b..6d282585d0b9 100644 --- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml +++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml @@ -19,15 +19,15 @@ properties: compatible: items: - enum: - - renesas,r8a774a1-csi2 # RZ/G2M - - renesas,r8a774b1-csi2 # RZ/G2N - - renesas,r8a774c0-csi2 # RZ/G2E - - renesas,r8a7795-csi2 # R-Car H3 - - renesas,r8a7796-csi2 # R-Car M3-W - - renesas,r8a77965-csi2 # R-Car M3-N - - renesas,r8a77970-csi2 # R-Car V3M - - renesas,r8a77980-csi2 # R-Car V3H - - renesas,r8a77990-csi2 # R-Car E3 + - renesas,r8a774a1-csi2 # RZ/G2M + - renesas,r8a774b1-csi2 # RZ/G2N + - renesas,r8a774c0-csi2 # RZ/G2E + - renesas,r8a7795-csi2 # R-Car H3 + - renesas,r8a7796-csi2 # R-Car M3-W + - renesas,r8a77965-csi2 # R-Car M3-N + - renesas,r8a77970-csi2 # R-Car V3M + - renesas,r8a77980-csi2 # R-Car V3H + - renesas,r8a77990-csi2 # R-Car E3 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index 2b629456d75f..c81dbc3e8960 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -31,8 +31,8 @@ properties: oneOf: - const: vdpu - items: - - const: vepu - - const: vdpu + - const: vepu + - const: vdpu clocks: maxItems: 2 diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml index 7b9407c0520e..2961a5b6872f 100644 --- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml @@ -25,7 +25,7 @@ properties: compatible: items: - enum: - - xlnx,mipi-csi2-rx-subsystem-5.0 + - xlnx,mipi-csi2-rx-subsystem-5.0 reg: maxItems: 1 @@ -65,13 +65,12 @@ properties: 0x2d - RAW14 0x2e - RAW16 0x2f - RAW20 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - anyOf: - - minimum: 0x1e - - maximum: 0x24 - - minimum: 0x28 - - maximum: 0x2f + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - minimum: 0x1e + maximum: 0x24 + - minimum: 0x28 + maximum: 0x2f xlnx,vfb: type: boolean diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml index dee5131c0361..68484136a510 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml @@ -15,12 +15,12 @@ properties: - const: fsl,imx6q-mmdc - items: - enum: - - fsl,imx6qp-mmdc - - fsl,imx6sl-mmdc - - fsl,imx6sll-mmdc - - fsl,imx6sx-mmdc - - fsl,imx6ul-mmdc - - fsl,imx7ulp-mmdc + - fsl,imx6qp-mmdc + - fsl,imx6sl-mmdc + - fsl,imx6sll-mmdc + - fsl,imx6sx-mmdc + - fsl,imx6ul-mmdc + - fsl,imx7ulp-mmdc - const: fsl,imx6q-mmdc reg: diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml index 17ba45a6c260..fe0ce191a851 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml @@ -16,11 +16,11 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-nemc - - ingenic,jz4780-nemc + - ingenic,jz4740-nemc + - ingenic,jz4780-nemc - items: - - const: ingenic,jz4725b-nemc - - const: ingenic,jz4740-nemc + - const: ingenic,jz4725b-nemc + - const: ingenic,jz4740-nemc "#address-cells": const: 2 diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml index 660005601a7f..7bfe120e14c3 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -26,10 +26,10 @@ properties: compatible: items: - enum: - - renesas,r8a77970-rpc-if # R-Car V3M - - renesas,r8a77980-rpc-if # R-Car V3H - - renesas,r8a77995-rpc-if # R-Car D3 - - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device + - renesas,r8a77970-rpc-if # R-Car V3M + - renesas,r8a77980-rpc-if # R-Car V3H + - renesas,r8a77995-rpc-if # R-Car D3 + - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device reg: items: diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml index a5531f6caf12..499c62c04daa 100644 --- a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml @@ -98,11 +98,11 @@ allOf: description: Databus power supply. - if: - properties: - compatible: - contains: - enum: - - cirrus,cs47l15 + properties: + compatible: + contains: + enum: + - cirrus,cs47l15 then: required: - MICVDD-supply @@ -174,24 +174,24 @@ properties: "mclk3" For the clock supplied on MCLK3. oneOf: - items: - - const: mclk1 + - const: mclk1 - items: - - const: mclk2 + - const: mclk2 - items: - - const: mclk3 + - const: mclk3 - items: - - const: mclk1 - - const: mclk2 + - const: mclk1 + - const: mclk2 - items: - - const: mclk1 - - const: mclk3 + - const: mclk1 + - const: mclk3 - items: - - const: mclk2 - - const: mclk3 + - const: mclk2 + - const: mclk3 - items: - - const: mclk1 - - const: mclk2 - - const: mclk3 + - const: mclk1 + - const: mclk2 + - const: mclk3 AVDD-supply: description: diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt deleted file mode 100644 index 4860eabd0f72..000000000000 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ /dev/null @@ -1,76 +0,0 @@ -ChromeOS Embedded Controller - -Google's ChromeOS EC is a Cortex-M device which talks to the AP and -implements various function such as keyboard and battery charging. - -The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the -compatible string used depends on the interface. Each connection method has -its own driver which connects to the top level interface-agnostic EC driver. -Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to -the top-level driver. - -Required properties (I2C): -- compatible: "google,cros-ec-i2c" -- reg: I2C slave address - -Required properties (SPI): -- compatible: "google,cros-ec-spi" -- reg: SPI chip select - -Required properties (RPMSG): -- compatible: "google,cros-ec-rpmsg" - -Optional properties (SPI): -- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little - time to wake up from sleep before they can receive SPI transfers at a high - clock rate. This property specifies the delay, in usecs, between the - assertion of the CS to the start of the first clock pulse. -- google,cros-ec-spi-msg-delay: Some implementations of the EC require some - additional processing time in order to accept new transactions. If the delay - between transactions is not long enough the EC may not be able to respond - properly to subsequent transactions and cause them to hang. This property - specifies the delay, in usecs, introduced between transactions to account - for the time required by the EC to get back into a state in which new data - can be accepted. - -Required properties (LPC): -- compatible: "google,cros-ec-lpc" -- reg: List of (IO address, size) pairs defining the interface uses - -Optional properties (all): -- google,has-vbc-nvram: Some implementations of the EC include a small - nvram space used to store verified boot context data. This boolean flag - is used to specify whether this nvram is present or not. - -Example for I2C: - -i2c@12ca0000 { - cros-ec@1e { - reg = <0x1e>; - compatible = "google,cros-ec-i2c"; - interrupts = <14 0>; - interrupt-parent = <&wakeup_eint>; - wakeup-source; - }; - - -Example for SPI: - -spi@131b0000 { - ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0x0>; - interrupts = <14 0>; - interrupt-parent = <&wakeup_eint>; - wakeup-source; - spi-max-frequency = <5000000>; - controller-data { - cs-gpio = <&gpf0 3 4 3 0>; - samsung,spi-cs; - samsung,spi-feedback-delay = <2>; - }; - }; -}; - - -Example for LPC is not supplied as it is not yet implemented. diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index 487a8445722e..9b6eb50606e8 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -79,18 +79,19 @@ properties: description: | conversion mode: 0 - temperature, in C*10 - 1 - pre-scaled voltage value + 1 - pre-scaled 24-bit voltage value 2 - scaled voltage based on an optional resistor divider and optional offset + 3 - pre-scaled 16-bit voltage value $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2] + enum: [0, 1, 2, 3] gw,voltage-divider-ohms: description: Values of resistors for divider on raw ADC input maxItems: 2 items: - minimum: 1000 - maximum: 1000000 + minimum: 1000 + maximum: 1000000 gw,voltage-offset-microvolt: description: | diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml new file mode 100644 index 000000000000..6a7279a85ec1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS Embedded Controller + +maintainers: + - Benson Leung <bleung@chromium.org> + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + - Guenter Roeck <groeck@chromium.org> + +description: + Google's ChromeOS EC is a microcontroller which talks to the AP and + implements various functions such as keyboard and battery charging. + The EC can be connected through various interfaces (I2C, SPI, and others) + and the compatible string specifies which interface is being used. + +properties: + compatible: + oneOf: + - description: + For implementations of the EC is connected through I2C. + const: google,cros-ec-i2c + - description: + For implementations of the EC is connected through SPI. + const: google,cros-ec-spi + - description: + For implementations of the EC is connected through RPMSG. + const: google,cros-ec-rpmsg + + google,cros-ec-spi-pre-delay: + description: + This property specifies the delay in usecs between the + assertion of the CS and the first clock pulse. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 0 + - minimum: 0 + + google,cros-ec-spi-msg-delay: + description: + This property specifies the delay in usecs between messages. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 0 + - minimum: 0 + + google,has-vbc-nvram: + description: + Some implementations of the EC include a small nvram space used to + store verified boot context data. This boolean flag is used to specify + whether this nvram is present or not. + type: boolean + + spi-max-frequency: + description: Maximum SPI frequency of the device in Hz. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + +if: + properties: + compatible: + contains: + enum: + - google,cros-ec-i2c + - google,cros-ec-rpmsg +then: + properties: + google,cros-ec-spi-pre-delay: false + google,cros-ec-spi-msg-delay: false + spi-max-frequency: false + +additionalProperties: false + +examples: + # Example for I2C + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@1e { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpio0>; + }; + }; + + # Example for SPI + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + google,cros-ec-spi-msg-delay = <30>; + google,cros-ec-spi-pre-delay = <10>; + interrupts = <99 0>; + interrupt-parent = <&gpio7>; + spi-max-frequency = <5000000>; + }; + }; + + # Example for RPMSG + - | + scp0 { + cros-ec { + compatible = "google,cros-ec-rpmsg"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml new file mode 100644 index 000000000000..a3b976f101e8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Khadas on-board Microcontroller Device Tree Bindings + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + Khadas embeds a microcontroller on their VIM and Edge boards adding some + system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory + storage, IR/Key resume control, system power LED control and more. + +properties: + compatible: + enum: + - khadas,mcu # MCU revision is discoverable + + "#cooling-cells": # Only needed for boards having FAN control feature + const: 2 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + khadas_mcu: system-controller@18 { + compatible = "khadas,mcu"; + reg = <0x18>; + #cooling-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index e675611f80d0..8bcea8dd7d90 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -33,6 +33,9 @@ properties: items: - const: mux + interrupts: + maxItems: 1 + "#address-cells": const: 1 @@ -106,11 +109,13 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> timer@40002400 { compatible = "st,stm32-lptimer"; reg = <0x40002400 0x400>; clocks = <&timer_clk>; clock-names = "mux"; + interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml new file mode 100644 index 000000000000..888ab4b5df45 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Multi-Function eXpander (STMFX) bindings + +description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for + communication with the main MCU. Its main features are GPIO expansion, + main MCU IDD measurement (IDD is the amount of current that flows + through VDD) and resistive touchscreen controller. + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +properties: + compatible: + const: st,stmfx-0300 + + reg: + enum: [ 0x42, 0x43 ] + + interrupts: + maxItems: 1 + + drive-open-drain: true + + vdd-supply: + maxItems: 1 + + pinctrl: + type: object + + properties: + compatible: + const: st,stmfx-0300-pinctrl + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + gpio-ranges: + description: if all STMFX pins[24:0] are available (no other STMFX function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; + if agpio[3:0] are not available (STMFX Touchscreen function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; + if agpio[7:4] are not available (STMFX IDD function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; + maxItems: 1 + + patternProperties: + "^[a-zA-Z]*-pins$": + type: object + + allOf: + - $ref: ../pinctrl/pinmux-node.yaml + + properties: + pins: true + bias-disable: true + bias-pull-up: true + bias-pull-pin-default: true + bias-pull-down: true + drive-open-drain: true + drive-push-pull: true + output-high: true + output-low: true + + additionalProperties: false + + required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller + - gpio-ranges + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx_pinctrl: pinctrl { + compatible = "st,stmfx-0300-pinctrl"; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick-pins { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index dd995d7dc1a6..305123e74a58 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -113,8 +113,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -135,8 +135,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -154,8 +154,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -172,8 +172,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -198,8 +198,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true @@ -220,8 +220,8 @@ properties: maxItems: 1 st,mask-reset: - description: mask reset for this regulator, - the regulator configuration is maintained during pmic reset. + description: mask reset for this regulator, the regulator configuration + is maintained during pmic reset. $ref: /schemas/types.yaml#/definitions/flag regulator-name: true diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt deleted file mode 100644 index f0c2f7fcf5c7..000000000000 --- a/Documentation/devicetree/bindings/mfd/stmfx.txt +++ /dev/null @@ -1,28 +0,0 @@ -STMicroelectonics Multi-Function eXpander (STMFX) Core bindings - -ST Multi-Function eXpander (STMFX) is a slave controller using I2C for -communication with the main MCU. Its main features are GPIO expansion, main -MCU IDD measurement (IDD is the amount of current that flows through VDD) and -resistive touchscreen controller. - -Required properties: -- compatible: should be "st,stmfx-0300". -- reg: I2C slave address of the device. -- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal. - Please refer to ../interrupt-controller/interrupt.txt - -Optional properties: -- drive-open-drain: configure MFX_IRQ_OUT as open drain. -- vdd-supply: phandle of the regulator supplying STMFX. - -Example: - - stmfx: stmfx@42 { - compatible = "st,stmfx-0300"; - reg = <0x42>; - interrupts = <8 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpioi>; - vdd-supply = <&v3v3>; - }; - -Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml index 03d0a232c75e..c8fd5d3e3071 100644 --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -24,12 +24,11 @@ maintainers: properties: compatible: - anyOf: - - items: - - enum: - - ti,j721e-system-controller - - const: syscon - - const: simple-mfd + items: + - enum: + - ti,j721e-system-controller + - const: syscon + - const: simple-mfd "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/mfd/twl-family.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt index 56f244b5d8a4..c2f9302965de 100644 --- a/Documentation/devicetree/bindings/mfd/twl-family.txt +++ b/Documentation/devicetree/bindings/mfd/twl-family.txt @@ -26,7 +26,7 @@ Optional node: Example: /* * Integrated Power Management Chip - * http://www.ti.com/lit/ds/symlink/twl6030.pdf + * https://www.ti.com/lit/ds/symlink/twl6030.pdf */ twl@48 { compatible = "ti,twl6030"; diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml index 4c0106cea36d..9e762d474218 100644 --- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml @@ -73,13 +73,13 @@ allOf: required: - DBVDD3-supply - if: - properties: - compatible: - contains: - enum: - - cirrus,cs47l24 - - wlf,wm1831 - - wlf,wm8997 + properties: + compatible: + contains: + enum: + - cirrus,cs47l24 + - wlf,wm1831 + - wlf,wm8997 then: properties: SPKVDD-supply: @@ -183,12 +183,12 @@ properties: clock supplied on MCLK2, recommended to be an always on 32k clock. oneOf: - items: - - const: mclk1 + - const: mclk1 - items: - - const: mclk2 + - const: mclk2 - items: - - const: mclk1 - - const: mclk2 + - const: mclk1 + - const: mclk2 reset-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml index 7a386a5b8fcb..0cd74c3116f8 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml @@ -21,9 +21,9 @@ properties: compatible: items: - enum: - - amlogic,meson8-sdhc - - amlogic,meson8b-sdhc - - amlogic,meson8m2-sdhc + - amlogic,meson8-sdhc + - amlogic,meson8b-sdhc + - amlogic,meson8m2-sdhc - const: amlogic,meson-mx-sdhc reg: diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml index e60bfe980ab3..9b63df1c22fb 100644 --- a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml @@ -16,14 +16,14 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-mmc - - ingenic,jz4725b-mmc - - ingenic,jz4760-mmc - - ingenic,jz4780-mmc - - ingenic,x1000-mmc + - ingenic,jz4740-mmc + - ingenic,jz4725b-mmc + - ingenic,jz4760-mmc + - ingenic,jz4780-mmc + - ingenic,x1000-mmc - items: - - const: ingenic,jz4770-mmc - - const: ingenic,jz4760-mmc + - const: ingenic,jz4770-mmc + - const: ingenic,jz4760-mmc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index e5dbc20456e5..b4c3fd40caeb 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -130,9 +130,9 @@ then: required: - clock-names description: - The internal card detection logic that exists in these controllers is - sectioned off to be run by a separate second clock source to allow - the main core clock to be turned off to save power. + The internal card detection logic that exists in these controllers is + sectioned off to be run by a separate second clock source to allow + the main core clock to be turned off to save power. unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml index cb9794edff24..b32876933269 100644 --- a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml @@ -14,12 +14,10 @@ maintainers: properties: compatible: - oneOf: - - items: - - enum: + items: + - enum: - xlnx,zynqmp-nand-controller - - enum: - - arasan,nfc-v3p10 + - const: arasan,nfc-v3p10 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml index 354cb63feea3..3201372b7f85 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale General-Purpose Media Interface (GPMI) binding +title: Freescale General-Purpose Media Interface (GPMI) binding maintainers: - Han Xu <han.xu@nxp.com> diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml index ee4d1d026fd8..73b86f2226c7 100644 --- a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mtd/mxc-nand.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale's mxc_nand binding +title: Freescale's mxc_nand binding maintainers: - Uwe Kleine-König <u.kleine-koenig@pengutronix.de> diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml index 6ae7de15d172..28a08ff407db 100644 --- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml @@ -42,7 +42,7 @@ patternProperties: const: 512 nand-ecc-strength: - enum: [1, 4 ,8 ] + enum: [1, 4, 8] allOf: - $ref: "nand-controller.yaml#" diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index faea214339ca..6a1ec50ad4fd 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -85,8 +85,8 @@ patternProperties: oneOf: - required: - - ports + - ports - required: - - ethernet-ports + - ethernet-ports ... diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index a3561276e609..8594f114f016 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -43,7 +43,7 @@ description: properties: compatible: - const: "qcom,sdm845-ipa" + const: "qcom,sdm845-ipa" reg: items: @@ -64,7 +64,7 @@ properties: maxItems: 1 clock-names: - const: core + const: core interrupts: items: @@ -96,8 +96,8 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. items: - - description: Whether the "ipa-clock-enabled" state bit is valid - - description: Whether the IPA clock is enabled (if valid) + - description: Whether the "ipa-clock-enabled" state bit is valid + - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: $ref: /schemas/types.yaml#/definitions/string-array @@ -140,9 +140,9 @@ required: oneOf: - required: - - modem-init + - modem-init - required: - - memory-region + - memory-region examples: - | diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index 7d84a863b9b9..cbacc04fc9e6 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -46,10 +46,10 @@ properties: clock-names: oneOf: - items: # for Pro4 - - const: gio - - const: ether - - const: ether-gb - - const: ether-phy + - const: gio + - const: ether + - const: ether-gb + - const: ether-phy - const: ether # for others resets: @@ -59,8 +59,8 @@ properties: reset-names: oneOf: - items: # for Pro4 - - const: gio - - const: ether + - const: gio + - const: ether - const: ether # for others socionext,syscon-phy-mode: diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index fafa34cebdb1..e5dff66df481 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -48,11 +48,11 @@ properties: minItems: 3 maxItems: 5 items: - - description: GMAC main clock - - description: MAC TX clock - - description: MAC RX clock - - description: For MPU family, used for power mode - - description: For MPU family, used for PHY without quartz + - description: GMAC main clock + - description: MAC TX clock + - description: MAC RX clock + - description: For MPU family, used for power mode + - description: For MPU family, used for PHY without quartz clock-names: minItems: 3 @@ -89,7 +89,7 @@ required: - st,syscon examples: - - | + - | #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/stm32mp1-clks.h> #include <dt-bindings/reset/stm32mp1-resets.h> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 3ea0e1290dbb..dadeb8f811c0 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -35,7 +35,7 @@ properties: reg: maxItems: 1 description: - The physical base address and size of full the CPSW module IO range + The physical base address and size of full the CPSW module IO range '#address-cells': const: 1 @@ -85,36 +85,36 @@ properties: patternProperties: "^port@[0-9]+$": - type: object - description: CPSW external ports - - allOf: - - $ref: ethernet-controller.yaml# - - properties: - reg: - items: - - enum: [1, 2] - description: CPSW port number - - phys: - maxItems: 1 - description: phandle on phy-gmii-sel PHY - - label: - description: label associated with this port - - ti,dual-emac-pvid: - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 1 - maximum: 1024 - description: - Specifies default PORT VID to be used to segregate - ports. Default value - CPSW port number. - - required: - - reg - - phys + type: object + description: CPSW external ports + + allOf: + - $ref: ethernet-controller.yaml# + + properties: + reg: + items: + - enum: [1, 2] + description: CPSW port number + + phys: + maxItems: 1 + description: phandle on phy-gmii-sel PHY + + label: + description: label associated with this port + + ti,dual-emac-pvid: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 1024 + description: + Specifies default PORT VID to be used to segregate + ports. Default value - CPSW port number. + + required: + - reg + - phys cpts: type: object diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 174579370a22..227270cbf892 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -55,7 +55,7 @@ properties: reg: maxItems: 1 description: - The physical base address and size of full the CPSW2G NUSS IO range + The physical base address and size of full the CPSW2G NUSS IO range reg-names: items: @@ -100,38 +100,38 @@ properties: patternProperties: port@1: - type: object - description: CPSW2G NUSS external ports - - $ref: ethernet-controller.yaml# - - properties: - reg: - items: - - const: 1 - description: CPSW port number - - phys: - maxItems: 1 - description: phandle on phy-gmii-sel PHY - - label: - description: label associated with this port - - ti,mac-only: - $ref: /schemas/types.yaml#definitions/flag - description: - Specifies the port works in mac-only mode. - - ti,syscon-efuse: - $ref: /schemas/types.yaml#definitions/phandle-array - description: - Phandle to the system control device node which provides access - to efuse IO range with MAC addresses - - required: - - reg - - phys + type: object + description: CPSW2G NUSS external ports + + $ref: ethernet-controller.yaml# + + properties: + reg: + items: + - const: 1 + description: CPSW port number + + phys: + maxItems: 1 + description: phandle on phy-gmii-sel PHY + + label: + description: label associated with this port + + ti,mac-only: + $ref: /schemas/types.yaml#definitions/flag + description: + Specifies the port works in mac-only mode. + + ti,syscon-efuse: + $ref: /schemas/types.yaml#definitions/phandle-array + description: + Phandle to the system control device node which provides access + to efuse IO range with MAC addresses + + required: + - reg + - phys additionalProperties: false diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index fe9c7df78ea1..1c9d7f05f173 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -21,18 +21,18 @@ properties: compatible: items: - enum: - - fsl,imx6q-ocotp - - fsl,imx6sl-ocotp - - fsl,imx6sx-ocotp - - fsl,imx6ul-ocotp - - fsl,imx6ull-ocotp - - fsl,imx7d-ocotp - - fsl,imx6sll-ocotp - - fsl,imx7ulp-ocotp - - fsl,imx8mq-ocotp - - fsl,imx8mm-ocotp - - fsl,imx8mn-ocotp - - fsl,imx8mp-ocotp + - fsl,imx6q-ocotp + - fsl,imx6sl-ocotp + - fsl,imx6sx-ocotp + - fsl,imx6ul-ocotp + - fsl,imx6ull-ocotp + - fsl,imx7d-ocotp + - fsl,imx6sll-ocotp + - fsl,imx7ulp-ocotp + - fsl,imx8mq-ocotp + - fsl,imx8mm-ocotp + - fsl,imx8mn-ocotp + - fsl,imx8mp-ocotp - const: syscon reg: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index d10a0cf91ba7..59aca6d22ff9 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -46,8 +46,8 @@ properties: const: 1 required: - - compatible - - reg + - compatible + - reg examples: - | diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml index cfe25cface21..b3c3d0c3c390 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -31,8 +31,7 @@ properties: ti,syscon-pcie-ctrl: description: Phandle to the SYSCON entry required for configuring PCIe mode and link speed. - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml index d7b60487c6c3..8200ba00bc09 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -31,8 +31,7 @@ properties: ti,syscon-pcie-ctrl: description: Phandle to the SYSCON entry required for configuring PCIe mode and link speed. - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml index 9e32cb43fb21..0d2557bb0bcc 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -37,9 +37,9 @@ properties: const: 0 phy-supply: - description: - Phandle to a regulator that provides power to the PHY. This - regulator will be managed during the PHY power on/off sequence. + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. required: - compatible diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml index cb71561a21b4..fb29ad807b68 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml @@ -100,9 +100,9 @@ properties: - const: linestate - const: otg-mux - items: - - const: otg-bvalid - - const: otg-id - - const: linestate + - const: otg-bvalid + - const: otg-id + - const: linestate phy-supply: description: diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index e4cd4a1deae9..185cdea9cf81 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -37,7 +37,7 @@ properties: - description: Address and length of PHY's common serdes block. "#clock-cells": - enum: [ 1, 2 ] + enum: [ 1, 2 ] "#address-cells": enum: [ 1, 2 ] @@ -65,16 +65,15 @@ properties: vdda-phy-supply: description: - Phandle to a regulator supply to PHY core block. + Phandle to a regulator supply to PHY core block. vdda-pll-supply: description: - Phandle to 1.8V regulator supply to PHY refclk pll block. + Phandle to 1.8V regulator supply to PHY refclk pll block. vddp-ref-clk-supply: description: - Phandle to a regulator supply to any specific refclk - pll block. + Phandle to a regulator supply to any specific refclk pll block. #Required nodes: patternProperties: @@ -184,8 +183,8 @@ allOf: - description: phy common block reset. reset-names: items: - - const: phy - - const: common + - const: phy + - const: common - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index 6e2487501457..ef8ae9f73092 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -26,7 +26,7 @@ properties: - const: dp_com "#clock-cells": - enum: [ 1, 2 ] + enum: [ 1, 2 ] "#address-cells": enum: [ 1, 2 ] @@ -62,16 +62,15 @@ properties: vdda-phy-supply: description: - Phandle to a regulator supply to PHY core block. + Phandle to a regulator supply to PHY core block. vdda-pll-supply: description: - Phandle to 1.8V regulator supply to PHY refclk pll block. + Phandle to 1.8V regulator supply to PHY refclk pll block. vddp-ref-clk-supply: description: - Phandle to a regulator supply to any specific refclk - pll block. + Phandle to a regulator supply to any specific refclk pll block. #Required nodes: patternProperties: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 9ba62dcb1e5d..ccda92859eca 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -17,15 +17,15 @@ properties: compatible: oneOf: - items: - - enum: - - qcom,ipq8074-qusb2-phy - - qcom,msm8996-qusb2-phy - - qcom,msm8998-qusb2-phy + - enum: + - qcom,ipq8074-qusb2-phy + - qcom,msm8996-qusb2-phy + - qcom,msm8998-qusb2-phy - items: - - enum: - - qcom,sc7180-qusb2-phy - - qcom,sdm845-qusb2-phy - - const: qcom,qusb2-v2-phy + - enum: + - qcom,sc7180-qusb2-phy + - qcom,sdm845-qusb2-phy + - const: qcom,qusb2-v2-phy reg: maxItems: 1 @@ -49,12 +49,12 @@ properties: - const: iface vdda-pll-supply: - description: - Phandle to 1.8V regulator supply to PHY refclk pll block. + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. vdda-phy-dpdm-supply: - description: - Phandle to 3.1V regulator supply to Dp/Dm port signals. + description: + Phandle to 3.1V regulator supply to Dp/Dm port signals. resets: maxItems: 1 @@ -64,12 +64,12 @@ properties: nvmem-cells: maxItems: 1 description: - Phandle to nvmem cell that contains 'HS Tx trim' - tuning parameter value for qusb2 phy. + Phandle to nvmem cell that contains 'HS Tx trim' + tuning parameter value for qusb2 phy. qcom,tcsr-syscon: description: - Phandle to TCSR syscon register region. + Phandle to TCSR syscon register region. $ref: /schemas/types.yaml#/definitions/phandle if: diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml index 86f49093b65f..a06831fd64b9 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -33,8 +33,8 @@ properties: clock-names: oneOf: - items: # for Pro5 - - const: gio - - const: link + - const: gio + - const: link - const: link # for others resets: @@ -44,8 +44,8 @@ properties: reset-names: oneOf: - items: # for Pro5 - - const: gio - - const: link + - const: gio + - const: link - const: link # for others socionext,syscon: diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml index c871d462c952..6fa5caab1487 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -37,12 +37,12 @@ properties: oneOf: - const: link # for PXs2 - items: # for PXs3 with phy-ext - - const: link - - const: phy - - const: phy-ext + - const: link + - const: phy + - const: phy-ext - items: # for others - - const: link - - const: phy + - const: link + - const: phy resets: maxItems: 2 diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml index edff2c95c9ae..9d46715ed036 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -37,15 +37,15 @@ properties: clock-names: oneOf: - items: # for Pro4, Pro5 - - const: gio - - const: link + - const: gio + - const: link - items: # for PXs3 with phy-ext - - const: link - - const: phy - - const: phy-ext + - const: link + - const: phy + - const: phy-ext - items: # for others - - const: link - - const: phy + - const: link + - const: phy resets: maxItems: 2 @@ -53,11 +53,11 @@ properties: reset-names: oneOf: - items: # for Pro4,Pro5 - - const: gio - - const: link + - const: gio + - const: link - items: # for others - - const: link - - const: phy + - const: link + - const: phy vbus-supply: description: A phandle to the regulator for USB VBUS diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 3f913d6d1c3d..5ffc95c62909 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -203,7 +203,8 @@ examples: }; refclk-dig { - clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, + <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz0_refclk_dig>; assigned-clock-parents = <&k3_clks 292 11>; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 017d9593573b..54631dc1adb0 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -34,22 +34,22 @@ patternProperties: patternProperties: "^function|groups$": $ref: "/schemas/types.yaml#/definitions/string" - enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index c643d6d44415..a90c0fe0495f 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -43,24 +43,24 @@ patternProperties: patternProperties: "^function|groups$": $ref: "/schemas/types.yaml#/definitions/string" - enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 1506726c7fea..c78ab7e2eee7 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -31,57 +31,57 @@ patternProperties: properties: function: $ref: "/schemas/types.yaml#/definitions/string" - enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, - SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4] + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, + SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] groups: $ref: "/schemas/types.yaml#/definitions/string" - enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, - SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, + SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index 18163fb69ce7..44c04d11ae4c 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -32,20 +32,20 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-pinctrl - - ingenic,jz4725b-pinctrl - - ingenic,jz4760-pinctrl - - ingenic,jz4770-pinctrl - - ingenic,jz4780-pinctrl - - ingenic,x1000-pinctrl - - ingenic,x1500-pinctrl - - ingenic,x1830-pinctrl + - ingenic,jz4740-pinctrl + - ingenic,jz4725b-pinctrl + - ingenic,jz4760-pinctrl + - ingenic,jz4770-pinctrl + - ingenic,jz4780-pinctrl + - ingenic,x1000-pinctrl + - ingenic,x1500-pinctrl + - ingenic,x1830-pinctrl - items: - - const: ingenic,jz4760b-pinctrl - - const: ingenic,jz4760-pinctrl + - const: ingenic,jz4760b-pinctrl + - const: ingenic,jz4760-pinctrl - items: - - const: ingenic,x1000e-pinctrl - - const: ingenic,x1000-pinctrl + - const: ingenic,x1000e-pinctrl + - const: ingenic,x1000-pinctrl reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt deleted file mode 100644 index c1b4c1819b84..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt +++ /dev/null @@ -1,116 +0,0 @@ -STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings - -ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion. -Please refer to ../mfd/stmfx.txt for STMFX Core bindings. - -Required properties: -- compatible: should be "st,stmfx-0300-pinctrl". -- #gpio-cells: should be <2>, the first cell is the GPIO number and the second - cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>. -- gpio-controller: marks the device as a GPIO controller. -- #interrupt-cells: should be <2>, the first cell is the GPIO number and the - second cell is the interrupt flags in accordance with - <dt-bindings/interrupt-controller/irq.h>. -- interrupt-controller: marks the device as an interrupt controller. -- gpio-ranges: specifies the mapping between gpio controller and pin - controller pins. Check "Concerning gpio-ranges property" below. -Please refer to ../gpio/gpio.txt. - -Please refer to pinctrl-bindings.txt for pin configuration. - -Required properties for pin configuration sub-nodes: -- pins: list of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes (pinconf-generic ones): -- bias-disable: disable any bias on the pin. -- bias-pull-up: the pin will be pulled up. -- bias-pull-pin-default: use the pin-default pull state. -- bias-pull-down: the pin will be pulled down. -- drive-open-drain: the pin will be driven with open drain. -- drive-push-pull: the pin will be driven actively high and low. -- output-high: the pin will be configured as an output driving high level. -- output-low: the pin will be configured as an output driving low level. - -Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are -called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2". - -Concerning gpio-ranges property: -- if all STMFX pins[24:0] are available (no other STMFX function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; -- if agpio[3:0] are not available (STMFX Touchscreen function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; -- if agpio[7:4] are not available (STMFX IDD function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; - - -Example: - - stmfx: stmfx@42 { - ... - - stmfx_pinctrl: stmfx-pin-controller { - compatible = "st,stmfx-0300-pinctrl"; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - gpio-ranges = <&stmfx_pinctrl 0 0 24>; - - joystick_pins: joystick { - pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; - bias-pull-up; - }; - }; - }; - -Example of STMFX GPIO consumers: - - joystick { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&joystick_pins>; - pinctrl-names = "default"; - button-0 { - label = "JoySel"; - linux,code = <KEY_ENTER>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - }; - button-1 { - label = "JoyDown"; - linux,code = <KEY_DOWN>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; - }; - button-2 { - label = "JoyLeft"; - linux,code = <KEY_LEFT>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <2 IRQ_TYPE_EDGE_RISING>; - }; - button-3 { - label = "JoyRight"; - linux,code = <KEY_RIGHT>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - }; - button-4 { - label = "JoyUp"; - linux,code = <KEY_UP>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; - }; - }; - - leds { - compatible = "gpio-leds"; - orange { - gpios = <&stmfx_pinctrl 17 1>; - }; - - blue { - gpios = <&stmfx_pinctrl 19 1>; - }; - } diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index b2de3992d484..c64c93206817 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -60,8 +60,8 @@ patternProperties: oneOf: - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, - sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, - qdsd_data3 ] + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] minItems: 1 maxItems: 4 @@ -70,31 +70,31 @@ patternProperties: Specify the alternative function to be configured for the specified pins. enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, - atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, - atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, - atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, - blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, - blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, - blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, - blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, - blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, - cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, - dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, - flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, - gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, - gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, - ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, - nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, - pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, - pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, - pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, - qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, - qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, - qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, - qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, - sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, - uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, + blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, + blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, + blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index 6dc3b52f47cd..8508c57522fd 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -76,22 +76,22 @@ patternProperties: pins. enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, - mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, - mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, - mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, - pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, - pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, - qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, - qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, - qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, - sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, - tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, - tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, - tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, + mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, + pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, + pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, + qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, + qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, + tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 0857cbeeb43c..72877544ca78 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -48,8 +48,8 @@ properties: st,package: description: - Indicates the SOC package used. - More details in include/dt-bindings/pinctrl/stm32-pinfunc.h + Indicates the SOC package used. + More details in include/dt-bindings/pinctrl/stm32-pinfunc.h $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index ff5936e4a215..dd564349aa53 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -58,13 +58,13 @@ properties: power-domains: description: - A phandle and PM domain specifier as defined by bindings of the power - controller specified by phandle. Some power domains might be powered - from another power domain (or have other hardware specific - dependencies). For representing such dependency a standard PM domain - consumer binding is used. When provided, all domains created - by the given provider should be subdomains of the domain specified - by this binding. + A phandle and PM domain specifier as defined by bindings of the power + controller specified by phandle. Some power domains might be powered + from another power domain (or have other hardware specific + dependencies). For representing such dependency a standard PM domain + consumer binding is used. When provided, all domains created + by the given provider should be subdomains of the domain specified + by this binding. required: - "#power-domain-cells" diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml index 30eabbb14ef3..6244b8ee9402 100644 --- a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml @@ -44,9 +44,9 @@ required: anyOf: - required: - - gpios + - gpios - required: - - charge-status-gpios + - charge-status-gpios additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index d2022206081f..c0d7700afee7 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -76,8 +76,7 @@ patternProperties: "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$": description: List of regulators and its properties - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml index 085cbd1ad8d0..fb111e2d5b99 100644 --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -29,7 +29,7 @@ properties: Short-circuit interrupt for lab. required: - - interrupts + - interrupts ibb: type: object @@ -42,7 +42,7 @@ properties: Short-circuit interrupt for lab. required: - - interrupts + - interrupts required: - compatible diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml index 24b0c50fa436..6070456a7b67 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml @@ -118,16 +118,16 @@ else: - const: l1dram required: - - compatible - - reg - - reg-names - - ti,sci - - ti,sci-dev-id - - ti,sci-proc-ids - - resets - - firmware-name - - mboxes - - memory-region + - compatible + - reg + - reg-names + - ti,sci + - ti,sci-dev-id + - ti,sci-proc-ids + - resets + - firmware-name + - mboxes + - memory-region unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml index b1a71c1bb05b..569cd3bd3a70 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml @@ -24,9 +24,9 @@ properties: compatible: items: - enum: - - fsl,imx7d-src - - fsl,imx8mq-src - - fsl,imx8mp-src + - fsl,imx7d-src + - fsl,imx8mq-src + - fsl,imx8mp-src - const: syscon reg: diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml index 4206bf8a2469..bc2c7e53a28e 100644 --- a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml @@ -16,16 +16,16 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-rtc - - ingenic,jz4760-rtc + - ingenic,jz4740-rtc + - ingenic,jz4760-rtc - items: - - const: ingenic,jz4725b-rtc - - const: ingenic,jz4740-rtc + - const: ingenic,jz4725b-rtc + - const: ingenic,jz4740-rtc - items: - - enum: - - ingenic,jz4770-rtc - - ingenic,jz4780-rtc - - const: ingenic,jz4760-rtc + - enum: + - ingenic,jz4770-rtc + - ingenic,jz4780-rtc + - const: ingenic,jz4760-rtc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml index 18cb456752f6..c7d14de214c4 100644 --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml @@ -52,6 +52,8 @@ properties: - nxp,pcf2127 # Real-time clock - nxp,pcf2129 + # Real-time clock + - nxp,pca2129 # Real-time Clock Module - pericom,pt7c4338 # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml index c023d650e9c1..dc8349322c83 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml @@ -16,18 +16,18 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-uart - - ingenic,jz4760-uart - - ingenic,jz4780-uart - - ingenic,x1000-uart + - ingenic,jz4740-uart + - ingenic,jz4760-uart + - ingenic,jz4780-uart + - ingenic,x1000-uart - items: - - enum: - - ingenic,jz4770-uart - - ingenic,jz4775-uart - - const: ingenic,jz4760-uart + - enum: + - ingenic,jz4770-uart + - ingenic,jz4775-uart + - const: ingenic,jz4760-uart - items: - - const: ingenic,jz4725b-uart - - const: ingenic,jz4740-uart + - const: ingenic,jz4725b-uart + - const: ingenic,jz4740-uart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml index 3cd0b70cd6cf..55fffae05dcf 100644 --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -97,13 +97,13 @@ allOf: clock-names: oneOf: - items: - - const: t0_clk - - const: slow_clk + - const: t0_clk + - const: slow_clk - items: - - const: t0_clk - - const: t1_clk - - const: t2_clk - - const: slow_clk + - const: t0_clk + - const: t1_clk + - const: t2_clk + - const: slow_clk required: - compatible diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index a2b29cc3e93b..bd04fdb57414 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -7,8 +7,8 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: GENI Serial Engine QUP Wrapper Controller maintainers: - - Mukesh Savaliya <msavaliy@codeaurora.org> - - Akash Asthana <akashast@codeaurora.org> + - Mukesh Savaliya <msavaliy@codeaurora.org> + - Akash Asthana <akashast@codeaurora.org> description: | Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper @@ -38,10 +38,10 @@ properties: - description: Slave AHB Clock "#address-cells": - const: 2 + const: 2 "#size-cells": - const: 2 + const: 2 ranges: true @@ -79,15 +79,15 @@ patternProperties: maxItems: 1 interconnects: - minItems: 2 - maxItems: 3 + minItems: 2 + maxItems: 3 interconnect-names: - minItems: 2 - items: - - const: qup-core - - const: qup-config - - const: qup-memory + minItems: 2 + items: + - const: qup-core + - const: qup-config + - const: qup-memory required: - reg @@ -111,10 +111,10 @@ patternProperties: maxItems: 1 "#address-cells": - const: 1 + const: 1 "#size-cells": - const: 0 + const: 0 required: - compatible @@ -136,10 +136,10 @@ patternProperties: maxItems: 1 "#address-cells": - const: 1 + const: 1 "#size-cells": - const: 0 + const: 0 clock-frequency: description: Desired I2C bus clock frequency in Hz. diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml index f9344adaf6c2..7a7f28469624 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml @@ -19,12 +19,11 @@ properties: compatible: items: - enum: - - amlogic,aiu-gxbb - - amlogic,aiu-gxl - - amlogic,aiu-meson8 - - amlogic,aiu-meson8b - - const: - amlogic,aiu + - amlogic,aiu-gxbb + - amlogic,aiu-gxl + - amlogic,aiu-meson8 + - amlogic,aiu-meson8b + - const: amlogic,aiu clocks: items: diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml index 51a0c30e10f9..b4b3828c40af 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml @@ -19,13 +19,11 @@ properties: compatible: oneOf: - items: - - const: - amlogic,g12a-toacodec + - const: amlogic,g12a-toacodec - items: - - enum: - - amlogic,sm1-toacodec - - const: - amlogic,g12a-toacodec + - enum: + - amlogic,sm1-toacodec + - const: amlogic,g12a-toacodec reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml index 83f44f07ac3f..5bcb643c288f 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml @@ -11,7 +11,7 @@ maintainers: properties: compatible: - const: cirrus,cs42l51 + const: cirrus,cs42l51 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml index 44f49bebb267..cdc0fdaab30a 100644 --- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml +++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml @@ -16,13 +16,13 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4740-i2s - - ingenic,jz4760-i2s - - ingenic,jz4770-i2s - - ingenic,jz4780-i2s + - ingenic,jz4740-i2s + - ingenic,jz4760-i2s + - ingenic,jz4770-i2s + - ingenic,jz4780-i2s - items: - - const: ingenic,jz4725b-i2s - - const: ingenic,jz4740-i2s + - const: ingenic,jz4725b-i2s + - const: ingenic,jz4740-i2s '#sound-dai-cells': const: 0 diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml index e5ac35280da3..fea9a1b6619a 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml @@ -11,23 +11,21 @@ maintainers: properties: compatible: - const: maxim,max98390 + const: maxim,max98390 reg: maxItems: 1 description: I2C address of the device. maxim,temperature_calib: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The calculated temperature data was measured while doing the calibration. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 65535 maxim,r0_calib: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: This is r0 calibration data which was measured in factory mode. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 8388607 diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index e620c77d0728..2f2fcffa65cb 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -48,8 +48,7 @@ properties: sound-name-prefix: pattern: "^DSPK[1-9]$" - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string description: Used as prefix for sink/source names of the component. Must be a unique string among multiple instances of the same component. diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index 1c14e83f67c7..8689d9f18c11 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -49,8 +49,7 @@ properties: sound-name-prefix: pattern: "^DMIC[1-9]$" - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string description: used as prefix for sink/source names of the component. Must be a unique string among multiple instances of the same component. diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 795797001843..9bbf18153d63 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -67,8 +67,7 @@ properties: sound-name-prefix: pattern: "^I2S[1-9]$" - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string description: Used as prefix for sink/source names of the component. Must be a unique string among multiple instances of the same component. diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index acb2b888dbfc..245895b58a2f 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -19,16 +19,16 @@ properties: - const: rockchip,rk3066-i2s - items: - enum: - - rockchip,px30-i2s - - rockchip,rk3036-i2s - - rockchip,rk3188-i2s - - rockchip,rk3228-i2s - - rockchip,rk3288-i2s - - rockchip,rk3308-i2s - - rockchip,rk3328-i2s - - rockchip,rk3366-i2s - - rockchip,rk3368-i2s - - rockchip,rk3399-i2s + - rockchip,px30-i2s + - rockchip,rk3036-i2s + - rockchip,rk3188-i2s + - rockchip,rk3228-i2s + - rockchip,rk3288-i2s + - rockchip,rk3308-i2s + - rockchip,rk3328-i2s + - rockchip,rk3366-i2s + - rockchip,rk3368-i2s + - rockchip,rk3399-i2s - const: rockchip,rk3066-i2s reg: @@ -55,8 +55,8 @@ properties: oneOf: - const: rx - items: - - const: tx - - const: rx + - const: tx + - const: rx power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml index c467152656f7..7bad6f16fe60 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml @@ -25,8 +25,8 @@ properties: - const: rockchip,rk3399-spdif - items: - enum: - - rockchip,rk3188-spdif - - rockchip,rk3288-spdif + - rockchip,rk3188-spdif + - rockchip,rk3288-spdif - const: rockchip,rk3066-spdif reg: diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 8192450d72dc..33a90f829c80 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -44,8 +44,8 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: Sets TDM RX capture edge. enum: - - 0 # Rising edge - - 1 # Falling edge + - 0 # Rising edge + - 1 # Falling edge '#sound-dai-cells': const: 1 diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml index 6f2be6503401..d52cfbeb2d07 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml @@ -37,13 +37,11 @@ properties: ti,cpb-mcasp: description: phandle to McASP used on CPB - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,cpb-codec: description: phandle to the pcm3168a codec used on the CPB - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle clocks: items: diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml index e0b88470a502..bb780f621628 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml @@ -50,28 +50,23 @@ properties: ti,cpb-mcasp: description: phandle to McASP used on CPB - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,cpb-codec: description: phandle to the pcm3168a codec used on the CPB - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,ivi-mcasp: description: phandle to McASP used on IVI - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,ivi-codec-a: description: phandle to the pcm3168a-A codec on the expansion board - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,ivi-codec-b: description: phandle to the pcm3168a-B codec on the expansion board - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle clocks: items: diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index e84d4a20c633..f578f17f3e04 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -32,32 +32,32 @@ properties: reg: maxItems: 1 description: | - I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f reset-gpios: description: | - GPIO used for hardware reset. + GPIO used for hardware reset. areg-supply: - description: | - Regulator with AVDD at 3.3V. If not defined then the internal regulator - is enabled. + description: | + Regulator with AVDD at 3.3V. If not defined then the internal regulator + is enabled. ti,mic-bias-source: description: | - Indicates the source for MIC Bias. - 0 - Mic bias is set to VREF - 1 - Mic bias is set to VREF × 1.096 - 6 - Mic bias is set to AVDD + Indicates the source for MIC Bias. + 0 - Mic bias is set to VREF + 1 - Mic bias is set to VREF × 1.096 + 6 - Mic bias is set to AVDD $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 6] ti,vref-source: description: | - Indicates the source for MIC Bias. - 0 - Set VREF to 2.75V - 1 - Set VREF to 2.5V - 2 - Set VREF to 1.375V + Indicates the source for MIC Bias. + 0 - Set VREF to 2.75V + 1 - Set VREF to 2.5V + 2 - Set VREF to 1.375V $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] @@ -109,7 +109,7 @@ properties: default: [0, 0, 0, 0] patternProperties: - '^ti,gpo-config-[1-4]$': + '^ti,gpo-config-[1-4]$': $ref: /schemas/types.yaml#/definitions/uint32-array description: | Defines the configuration and output driver for the general purpose diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 243a6b1e66ea..7866a655d81c 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -22,10 +22,10 @@ properties: - const: allwinner,sun6i-a31-spi - const: allwinner,sun8i-h3-spi - items: - - enum: - - allwinner,sun8i-r40-spi - - allwinner,sun50i-h6-spi - - const: allwinner,sun8i-h3-spi + - enum: + - allwinner,sun8i-r40-spi + - allwinner,sun50i-h6-spi + - const: allwinner,sun8i-h3-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 6e44c9c2aeba..1b50cedbfb3e 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -23,19 +23,19 @@ properties: - const: fsl,imx51-ecspi - const: fsl,imx53-ecspi - items: - - enum: - - fsl,imx50-ecspi - - fsl,imx6q-ecspi - - fsl,imx6sx-ecspi - - fsl,imx6sl-ecspi - - fsl,imx6sll-ecspi - - fsl,imx6ul-ecspi - - fsl,imx7d-ecspi - - fsl,imx8mq-ecspi - - fsl,imx8mm-ecspi - - fsl,imx8mn-ecspi - - fsl,imx8mp-ecspi - - const: fsl,imx51-ecspi + - enum: + - fsl,imx50-ecspi + - fsl,imx6q-ecspi + - fsl,imx6sx-ecspi + - fsl,imx6sl-ecspi + - fsl,imx6sll-ecspi + - fsl,imx6ul-ecspi + - fsl,imx7d-ecspi + - fsl,imx8mq-ecspi + - fsl,imx8mm-ecspi + - fsl,imx8mn-ecspi + - fsl,imx8mp-ecspi + - const: fsl,imx51-ecspi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml index 4ddb42a4ae05..e0c55dd235d8 100644 --- a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml +++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml @@ -33,4 +33,4 @@ examples: reg = <0x1f000000 0x10>; }; -...
\ No newline at end of file +... diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index 0ae692dc28b5..3d3fed63409b 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -43,47 +43,47 @@ properties: maxItems: 1 required: - - compatible - - reg - - spi-max-frequency - - mux-controls + - compatible + - reg + - spi-max-frequency + - mux-controls examples: - - | - #include <dt-bindings/gpio/gpio.h> - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; + - | + #include <dt-bindings/gpio/gpio.h> + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; - mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; - }; + mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; - spi { - #address-cells = <1>; - #size-cells = <0>; - spi@0 { - compatible = "spi-mux"; - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <100000000>; + spi { + #address-cells = <1>; + #size-cells = <0>; + spi@0 { + compatible = "spi-mux"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <100000000>; - mux-controls = <&mux>; + mux-controls = <&mux>; - spi-flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <40000000>; - }; + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <40000000>; + }; - spi-device@1 { - compatible = "lineartechnology,ltc2488"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <10000000>; - }; - }; - }; + spi-device@1 { + compatible = "lineartechnology,ltc2488"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <10000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index 81ad4b761502..74dc6185eced 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -26,13 +26,13 @@ properties: - const: rockchip,rv1108-spi - items: - enum: - - rockchip,px30-spi - - rockchip,rk3188-spi - - rockchip,rk3288-spi - - rockchip,rk3308-spi - - rockchip,rk3328-spi - - rockchip,rk3368-spi - - rockchip,rk3399-spi + - rockchip,px30-spi + - rockchip,rk3188-spi + - rockchip,rk3288-spi + - rockchip,rk3308-spi + - rockchip,rk3328-spi + - rockchip,rk3368-spi + - rockchip,rk3399-spi - const: rockchip,rk3066-spi reg: diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml index 5145883d932e..ad4beaf02842 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml @@ -44,9 +44,9 @@ select: true properties: "#cooling-cells": description: - Must be 2, in order to specify minimum and maximum cooling state used in - the cooling-maps reference. The first cell is the minimum cooling state - and the second cell is the maximum cooling state requested. + Must be 2, in order to specify minimum and maximum cooling state used in + the cooling-maps reference. The first cell is the minimum cooling state + and the second cell is the maximum cooling state requested. const: 2 examples: diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml index 7a922f540934..a832d427e9d5 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml @@ -18,29 +18,28 @@ description: | This binding describes the thermal idle node. properties: - $nodename: - const: thermal-idle - description: | - A thermal-idle node describes the idle cooling device properties to - cool down efficiently the attached thermal zone. - - '#cooling-cells': - const: 2 - description: | - Must be 2, in order to specify minimum and maximum cooling state used in - the cooling-maps reference. The first cell is the minimum cooling state - and the second cell is the maximum cooling state requested. - - duration-us: - description: | - The idle duration in microsecond the device should cool down. - - exit-latency-us: - description: | - The exit latency constraint in microsecond for the injected - idle state for the device. It is the latency constraint to - apply when selecting an idle state from among all the present - ones. + $nodename: + const: thermal-idle + description: | + A thermal-idle node describes the idle cooling device properties to + cool down efficiently the attached thermal zone. + + '#cooling-cells': + const: 2 + description: | + Must be 2, in order to specify minimum and maximum cooling state used in + the cooling-maps reference. The first cell is the minimum cooling state + and the second cell is the maximum cooling state requested. + + duration-us: + description: | + The idle duration in microsecond the device should cool down. + + exit-latency-us: + description: | + The exit latency constraint in microsecond for the injected idle state + for the device. It is the latency constraint to apply when selecting an + idle state from among all the present ones. required: - '#cooling-cells' diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml index 883f7f46650b..a4f51f46b7a1 100644 --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml @@ -20,17 +20,17 @@ properties: - const: fsl,imx31-gpt - items: - enum: - - fsl,imx25-gpt - - fsl,imx50-gpt - - fsl,imx51-gpt - - fsl,imx53-gpt - - fsl,imx6q-gpt + - fsl,imx25-gpt + - fsl,imx50-gpt + - fsl,imx51-gpt + - fsl,imx53-gpt + - fsl,imx6q-gpt - const: fsl,imx31-gpt - const: fsl,imx6dl-gpt - items: - enum: - - fsl,imx6sl-gpt - - fsl,imx6sx-gpt + - fsl,imx6sl-gpt + - fsl,imx6sx-gpt - const: fsl,imx6dl-gpt reg: diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml index 371fb02a4351..024bcad75101 100644 --- a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml @@ -49,16 +49,16 @@ properties: compatible: oneOf: - items: - - enum: - - ingenic,jz4740-tcu - - ingenic,jz4725b-tcu - - ingenic,jz4770-tcu - - ingenic,x1000-tcu - - const: simple-mfd + - enum: + - ingenic,jz4740-tcu + - ingenic,jz4725b-tcu + - ingenic,jz4770-tcu + - ingenic,x1000-tcu + - const: simple-mfd - items: - - const: ingenic,jz4780-tcu - - const: ingenic,jz4770-tcu - - const: simple-mfd + - const: ingenic,jz4780-tcu + - const: ingenic,jz4770-tcu + - const: simple-mfd reg: maxItems: 1 @@ -113,13 +113,13 @@ patternProperties: compatible: oneOf: - enum: - - ingenic,jz4740-watchdog - - ingenic,jz4780-watchdog + - ingenic,jz4740-watchdog + - ingenic,jz4780-watchdog - items: - - enum: - - ingenic,jz4770-watchdog - - ingenic,jz4725b-watchdog - - const: ingenic,jz4740-watchdog + - enum: + - ingenic,jz4770-watchdog + - ingenic,jz4725b-watchdog + - const: ingenic,jz4740-watchdog reg: maxItems: 1 @@ -143,13 +143,13 @@ patternProperties: compatible: oneOf: - enum: - - ingenic,jz4740-pwm - - ingenic,jz4725b-pwm + - ingenic,jz4740-pwm + - ingenic,jz4725b-pwm - items: - - enum: - - ingenic,jz4770-pwm - - ingenic,jz4780-pwm - - const: ingenic,jz4740-pwm + - enum: + - ingenic,jz4770-pwm + - ingenic,jz4780-pwm + - const: ingenic,jz4740-pwm reg: maxItems: 1 @@ -182,11 +182,11 @@ patternProperties: compatible: oneOf: - enum: - - ingenic,jz4725b-ost - - ingenic,jz4770-ost + - ingenic,jz4725b-ost + - ingenic,jz4770-ost - items: - - const: ingenic,jz4780-ost - - const: ingenic,jz4770-ost + - const: ingenic,jz4780-ost + - const: ingenic,jz4770-ost reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml index 5d300efdf0ca..7b39e3204fb3 100644 --- a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml +++ b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml @@ -27,8 +27,8 @@ properties: clocks: minItems: 1 items: - - description: Timer ticks reference clock source - - description: APB interface clock source + - description: Timer ticks reference clock source + - description: APB interface clock source clock-names: minItems: 1 diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index b7e94fe8643f..4ace8039840a 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -298,7 +298,7 @@ properties: - national,lm80 # Temperature sensor with integrated fan control - national,lm85 - # ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface + # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator - national,lm92 # i2c trusted platform module (TPM) - nuvoton,npct501 diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 4ff632d82858..ffa157a0fce7 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -19,24 +19,24 @@ properties: - const: snps,dwc2 - items: - enum: - - rockchip,px30-usb - - rockchip,rk3036-usb - - rockchip,rk3188-usb - - rockchip,rk3228-usb - - rockchip,rk3288-usb - - rockchip,rk3328-usb - - rockchip,rk3368-usb - - rockchip,rv1108-usb + - rockchip,px30-usb + - rockchip,rk3036-usb + - rockchip,rk3188-usb + - rockchip,rk3228-usb + - rockchip,rk3288-usb + - rockchip,rk3328-usb + - rockchip,rk3368-usb + - rockchip,rv1108-usb - const: rockchip,rk3066-usb - const: snps,dwc2 - const: lantiq,arx100-usb - const: lantiq,xrx200-usb - items: - enum: - - amlogic,meson8-usb - - amlogic,meson8b-usb - - amlogic,meson-gxbb-usb - - amlogic,meson-g12a-usb + - amlogic,meson8-usb + - amlogic,meson8b-usb + - amlogic,meson-gxbb-usb + - amlogic,meson-g12a-usb - const: snps,dwc2 - const: amcc,dwc-otg - const: snps,dwc2 @@ -116,12 +116,13 @@ properties: snps,need-phy-for-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that the phy needs to be left on for remote wakeup during suspend. + description: If present indicates that the phy needs to be left on for + remote wakeup during suspend. snps,reset-phy-on-wake: $ref: /schemas/types.yaml#/definitions/flag - description: If present indicates that we need to reset the PHY when we detect a wakeup. - This is due to a hardware errata. + description: If present indicates that we need to reset the PHY when we + detect a wakeup. This is due to a hardware errata. required: - compatible diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 69f3f26d1207..247ef00381ea 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -80,7 +80,7 @@ properties: companion: $ref: /schemas/types.yaml#/definitions/phandle description: - Phandle of a companion. + Phandle of a companion. phys: description: PHY specifier for the USB PHY diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml index c334aea6b59d..678396eeeb78 100644 --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -16,11 +16,11 @@ properties: compatible: oneOf: - enum: - - ingenic,jz4770-musb - - ingenic,jz4740-musb + - ingenic,jz4770-musb + - ingenic,jz4740-musb - items: - - const: ingenic,jz4725b-musb - - const: ingenic,jz4740-musb + - const: ingenic,jz4725b-musb + - const: ingenic,jz4740-musb reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index 0073763a30d8..196589c93373 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -57,11 +57,11 @@ properties: minItems: 4 maxItems: 5 items: - - const: dev - - const: ss - - const: ss_src - - const: fs_src - - const: hs_src + - const: dev + - const: ss + - const: ss_src + - const: fs_src + - const: hs_src power-domains: items: diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 90750255792f..484fc1091d7c 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -19,9 +19,9 @@ properties: power-domains: description: - PM domain provider node and an args specifier containing - the USB device id value. See, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + PM domain provider node and an args specifier containing + the USB device id value. See, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt clocks: description: Clock phandles to usb2_refclk and lpm_clk diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index 804b9b4f6654..c1b19fc5d0a2 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -13,8 +13,8 @@ properties: compatible: items: - enum: - - ti,keystone-dwc3 - - ti,am654-dwc3 + - ti,keystone-dwc3 + - ti,am654-dwc3 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f3d847832fdc..2baee2c817c1 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -993,7 +993,8 @@ patternProperties: "^sst,.*": description: Silicon Storage Technology, Inc. "^sstar,.*": - description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.) + description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. + (formerly part of MStar Semiconductor, Inc.) "^st,.*": description: STMicroelectronics "^starry,.*": diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt index e60b9a13bdcb..aa10b8ec36e2 100644 --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt @@ -11,8 +11,8 @@ Optional properties: See clock-bindings.txt Documentation: -Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf -Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf +Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf +Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf Examples: diff --git a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt deleted file mode 100644 index eb0914420c7c..000000000000 --- a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt +++ /dev/null @@ -1,24 +0,0 @@ -Synopsys Designware Watchdog Timer - -Required Properties: - -- compatible : Should contain "snps,dw-wdt" -- reg : Base address and size of the watchdog timer registers. -- clocks : phandle + clock-specifier for the clock that drives the - watchdog timer. - -Optional Properties: - -- interrupts : The interrupt used for the watchdog timeout warning. -- resets : phandle pointing to the system reset controller with - line index for the watchdog. - -Example: - - watchdog0: wd@ffd02000 { - compatible = "snps,dw-wdt"; - reg = <0xffd02000 0x1000>; - interrupts = <0 171 4>; - clocks = <&per_base_clk>; - resets = <&rst WDT0_RESET>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt deleted file mode 100644 index 41aeaa2ff0f8..000000000000 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt +++ /dev/null @@ -1,28 +0,0 @@ -Qualcomm Krait Processor Sub-system (KPSS) Watchdog ---------------------------------------------------- - -Required properties : -- compatible : shall contain only one of the following: - - "qcom,kpss-wdt-msm8960" - "qcom,kpss-wdt-apq8064" - "qcom,kpss-wdt-ipq8064" - "qcom,kpss-wdt-ipq4019" - "qcom,kpss-timer" - "qcom,scss-timer" - "qcom,kpss-wdt" - -- reg : shall contain base register location and length -- clocks : shall contain the input clock - -Optional properties : -- timeout-sec : shall contain the default watchdog timeout in seconds, - if unset, the default timeout is 30 seconds - -Example: - watchdog@208a038 { - compatible = "qcom,kpss-wdt-ipq8064"; - reg = <0x0208a038 0x40>; - clocks = <&sleep_clk>; - timeout-sec = <10>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml new file mode 100644 index 000000000000..0709ddf0b6a5 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/qcom-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer + +maintainers: + - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - qcom,apss-wdt-qcs404 + - qcom,apss-wdt-sc7180 + - qcom,apss-wdt-sdm845 + - qcom,apss-wdt-sm8150 + - qcom,kpss-timer + - qcom,kpss-wdt + - qcom,kpss-wdt-apq8064 + - qcom,kpss-wdt-ipq4019 + - qcom,kpss-wdt-ipq8064 + - qcom,kpss-wdt-msm8960 + - qcom,scss-timer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +examples: + - | + watchdog@208a038 { + compatible = "qcom,kpss-wdt-ipq8064"; + reg = <0x0208a038 0x40>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml index 572f4c912fef..6933005b52bd 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml @@ -41,6 +41,7 @@ properties: - renesas,r8a774a1-wdt # RZ/G2M - renesas,r8a774b1-wdt # RZ/G2N - renesas,r8a774c0-wdt # RZ/G2E + - renesas,r8a774e1-wdt # RZ/G2H - renesas,r8a7795-wdt # R-Car H3 - renesas,r8a7796-wdt # R-Car M3-W - renesas,r8a77961-wdt # R-Car M3-W+ diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml new file mode 100644 index 000000000000..d9fc7bb851b1 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/snps,dw-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys Designware Watchdog Timer + +allOf: + - $ref: "watchdog.yaml#" + +maintainers: + - Jamie Iles <jamie@jamieiles.com> + +properties: + compatible: + const: snps,dw-wdt + + reg: + maxItems: 1 + + interrupts: + description: DW Watchdog pre-timeout interrupt + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: Watchdog timer reference clock + - description: APB3 interface clock + + clock-names: + minItems: 1 + items: + - const: tclk + - const: pclk + + resets: + description: Phandle to the DW Watchdog reset lane + maxItems: 1 + + snps,watchdog-tops: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + DW APB Watchdog custom timer intervals - Timeout Period ranges (TOPs). + Each TOP is a number loaded into the watchdog counter at the moment of + the timer restart. The counter decrementing happens each tick of the + reference clock. Therefore the TOPs array is equivalent to an array of + the timer expiration intervals supported by the DW APB Watchdog. Note + DW APB Watchdog IP-core might be synthesized with fixed TOP values, + in which case this property is unnecessary with default TOPs utilized. + default: [0x0001000 0x0002000 0x0004000 0x0008000 + 0x0010000 0x0020000 0x0040000 0x0080000 + 0x0100000 0x0200000 0x0400000 0x0800000 + 0x1000000 0x2000000 0x4000000 0x8000000] + minItems: 16 + maxItems: 16 + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + +examples: + - | + watchdog@ffd02000 { + compatible = "snps,dw-wdt"; + reg = <0xffd02000 0x1000>; + interrupts = <0 171 4>; + clocks = <&per_base_clk>; + resets = <&wdt_rst>; + }; + + - | + watchdog@ffd02000 { + compatible = "snps,dw-wdt"; + reg = <0xffd02000 0x1000>; + interrupts = <0 171 4>; + clocks = <&per_base_clk>; + clock-names = "tclk"; + snps,watchdog-tops = <0x000000FF 0x000001FF 0x000003FF + 0x000007FF 0x0000FFFF 0x0001FFFF + 0x0003FFFF 0x0007FFFF 0x000FFFFF + 0x001FFFFF 0x003FFFFF 0x007FFFFF + 0x00FFFFFF 0x01FFFFFF 0x03FFFFFF + 0x07FFFFFF>; + }; +... |