summaryrefslogtreecommitdiff
path: root/Documentation/hwmon/ina2xx.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/ina2xx.rst')
-rw-r--r--Documentation/hwmon/ina2xx.rst19
1 files changed, 19 insertions, 0 deletions
diff --git a/Documentation/hwmon/ina2xx.rst b/Documentation/hwmon/ina2xx.rst
index 94b9a260c518..ed81f5416331 100644
--- a/Documentation/hwmon/ina2xx.rst
+++ b/Documentation/hwmon/ina2xx.rst
@@ -99,6 +99,25 @@ Sysfs entries for ina226, ina230 and ina231 only
------------------------------------------------
======================= ====================================================
+in0_lcrit Critical low shunt voltage
+in0_crit Critical high shunt voltage
+in0_lcrit_alarm Shunt voltage critical low alarm
+in0_crit_alarm Shunt voltage critical high alarm
+in1_lcrit Critical low bus voltage
+in1_crit Critical high bus voltage
+in1_lcrit_alarm Bus voltage critical low alarm
+in1_crit_alarm Bus voltage critical high alarm
+power1_crit Critical high power
+power1_crit_alarm Power critical high alarm
update_interval data conversion time; affects number of samples used
to average results for shunt and bus voltages.
======================= ====================================================
+
+.. note::
+
+ - Configure `shunt_resistor` before configure `power1_crit`, because power
+ value is calculated based on `shunt_resistor` set.
+ - Because of the underlying register implementation, only one `*crit` setting
+ and its `alarm` can be active. Writing to one `*crit` setting clears other
+ `*crit` settings and alarms. Writing 0 to any `*crit` setting clears all
+ `*crit` settings and alarms.