summaryrefslogtreecommitdiff
path: root/Documentation/power/regulator/machine.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/power/regulator/machine.txt')
-rw-r--r--Documentation/power/regulator/machine.txt11
1 files changed, 9 insertions, 2 deletions
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
index 311c61f2feaa..ce63af0a8e35 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.txt
@@ -43,6 +43,7 @@ to their supply regulator :-
static struct regulator_init_data regulator1_data = {
.constraints = {
+ .name = "Regulator-1",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
@@ -51,13 +52,19 @@ static struct regulator_init_data regulator1_data = {
.consumer_supplies = regulator1_consumers,
};
+The name field should be set to something that is usefully descriptive
+for the board for configuration of supplies for other regulators and
+for use in logging and other diagnostic output. Normally the name
+used for the supply rail in the schematic is a good choice. If no
+name is provided then the subsystem will choose one.
+
Regulator-1 supplies power to Regulator-2. This relationship must be registered
with the core so that Regulator-1 is also enabled when Consumer A enables its
supply (Regulator-2). The supply regulator is set by the supply_regulator
-field below:-
+field below and co:-
static struct regulator_init_data regulator2_data = {
- .supply_regulator = "regulator_name",
+ .supply_regulator = "Regulator-1",
.constraints = {
.min_uV = 1800000,
.max_uV = 2000000,