diff options
Diffstat (limited to 'Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst')
| -rw-r--r-- | Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 886 |
1 files changed, 75 insertions, 811 deletions
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index ce728c757eaf..00944e97d638 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -1,6 +1,6 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later -.. _mpeg-controls: +.. _codec-controls: *********************** Codec Control Reference @@ -26,7 +26,7 @@ Generic Codec Controls Codec Control IDs ----------------- -``V4L2_CID_MPEG_CLASS (class)`` +``V4L2_CID_CODEC_CLASS (class)`` The Codec class descriptor. Calling :ref:`VIDIOC_QUERYCTRL` for this control will return a description of this control class. This description can be @@ -1182,6 +1182,18 @@ enum v4l2_mpeg_video_h264_entropy_mode - V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter should be chosen to meet both requirements. +``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the H264 B frame to limit B frame + quality to a range. Valid range: from 0 to 51. If + V4L2_CID_MPEG_VIDEO_H264_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the H264 B frame to limit B frame + quality to a range. Valid range: from 0 to 51. If + V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + ``V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (integer)`` Quantization parameter for an I frame for MPEG4. Valid range: from 1 to 31. @@ -1501,698 +1513,26 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - * - Bit 16:32 - Layer number +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L0_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 0 for H264 encoder. -.. _v4l2-mpeg-h264: - -``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)`` - Specifies the sequence parameter set (as extracted from the - bitstream) for the associated H264 slice data. This includes the - necessary parameters for configuring a stateless hardware decoding - pipeline for H264. The bitstream parameters are defined according - to :ref:`h264`, section 7.4.2.1.1 "Sequence Parameter Set Data - Semantics". For further documentation, refer to the above - specification, unless there is an explicit comment stating - otherwise. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_h264_sps - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_h264_sps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``profile_idc`` - - - * - __u8 - - ``constraint_set_flags`` - - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>` - * - __u8 - - ``level_idc`` - - - * - __u8 - - ``seq_parameter_set_id`` - - - * - __u8 - - ``chroma_format_idc`` - - - * - __u8 - - ``bit_depth_luma_minus8`` - - - * - __u8 - - ``bit_depth_chroma_minus8`` - - - * - __u8 - - ``log2_max_frame_num_minus4`` - - - * - __u8 - - ``pic_order_cnt_type`` - - - * - __u8 - - ``log2_max_pic_order_cnt_lsb_minus4`` - - - * - __u8 - - ``max_num_ref_frames`` - - - * - __u8 - - ``num_ref_frames_in_pic_order_cnt_cycle`` - - - * - __s32 - - ``offset_for_ref_frame[255]`` - - - * - __s32 - - ``offset_for_non_ref_pic`` - - - * - __s32 - - ``offset_for_top_to_bottom_field`` - - - * - __u16 - - ``pic_width_in_mbs_minus1`` - - - * - __u16 - - ``pic_height_in_map_units_minus1`` - - - * - __u32 - - ``flags`` - - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>` - -.. _h264_sps_constraints_set_flags: - -``Sequence Parameter Set Constraints Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG`` - - 0x00000001 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG`` - - 0x00000002 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG`` - - 0x00000004 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG`` - - 0x00000008 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG`` - - 0x00000010 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG`` - - 0x00000020 - - - -.. _h264_sps_flags: - -``Sequence Parameter Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE`` - - 0x00000001 - - - * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS`` - - 0x00000002 - - - * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO`` - - 0x00000004 - - - * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED`` - - 0x00000008 - - - * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY`` - - 0x00000010 - - - * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD`` - - 0x00000020 - - - * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE`` - - 0x00000040 - - - -``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)`` - Specifies the picture parameter set (as extracted from the - bitstream) for the associated H264 slice data. This includes the - necessary parameters for configuring a stateless hardware decoding - pipeline for H264. The bitstream parameters are defined according - to :ref:`h264`, section 7.4.2.2 "Picture Parameter Set RBSP - Semantics". For further documentation, refer to the above - specification, unless there is an explicit comment stating - otherwise. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_h264_pps - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_h264_pps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``pic_parameter_set_id`` - - - * - __u8 - - ``seq_parameter_set_id`` - - - * - __u8 - - ``num_slice_groups_minus1`` - - - * - __u8 - - ``num_ref_idx_l0_default_active_minus1`` - - - * - __u8 - - ``num_ref_idx_l1_default_active_minus1`` - - - * - __u8 - - ``weighted_bipred_idc`` - - - * - __s8 - - ``pic_init_qp_minus26`` - - - * - __s8 - - ``pic_init_qs_minus26`` - - - * - __s8 - - ``chroma_qp_index_offset`` - - - * - __s8 - - ``second_chroma_qp_index_offset`` - - - * - __u16 - - ``flags`` - - See :ref:`Picture Parameter Set Flags <h264_pps_flags>` - -.. _h264_pps_flags: - -``Picture Parameter Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE`` - - 0x00000001 - - - * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT`` - - 0x00000002 - - - * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED`` - - 0x00000004 - - - * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT`` - - 0x00000008 - - - * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED`` - - 0x00000010 - - - * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT`` - - 0x00000020 - - - * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE`` - - 0x00000040 - - - * - ``V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT`` - - 0x00000080 - - Indicates that ``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX`` - must be used for this picture. - -``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)`` - Specifies the scaling matrix (as extracted from the bitstream) for - the associated H264 slice data. The bitstream parameters are - defined according to :ref:`h264`, section 7.4.2.1.1.1 "Scaling - List Semantics". For further documentation, refer to the above - specification, unless there is an explicit comment stating - otherwise. - - .. note:: +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L1_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 1 for H264 encoder. - This compound control is not yet part of the public kernel API and - it is expected to change. +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L2_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 2 for H264 encoder. -.. c:type:: v4l2_ctrl_h264_scaling_matrix +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L3_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 3 for H264 encoder. -.. cssclass:: longtable +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L4_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 4 for H264 encoder. -.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L5_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 5 for H264 encoder. - * - __u8 - - ``scaling_list_4x4[6][16]`` - - Scaling matrix after applying the inverse scanning process. - Expected list order is Intra Y, Intra Cb, Intra Cr, Inter Y, - Inter Cb, Inter Cr. The values on each scaling list are - expected in raster scan order. - * - __u8 - - ``scaling_list_8x8[6][64]`` - - Scaling matrix after applying the inverse scanning process. - Expected list order is Intra Y, Inter Y, Intra Cb, Inter Cb, - Intra Cr, Inter Cr. The values on each scaling list are - expected in raster scan order. - -``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)`` - Specifies the slice parameters (as extracted from the bitstream) - for the associated H264 slice data. This includes the necessary - parameters for configuring a stateless hardware decoding pipeline - for H264. The bitstream parameters are defined according to - :ref:`h264`, section 7.4.3 "Slice Header Semantics". For further - documentation, refer to the above specification, unless there is - an explicit comment stating otherwise. - - .. note:: - - This compound control is not yet part of the public kernel API - and it is expected to change. - -.. c:type:: v4l2_ctrl_h264_slice_params - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_h264_slice_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u32 - - ``header_bit_size`` - - Offset in bits to slice_data() from the beginning of this slice. - * - __u32 - - ``first_mb_in_slice`` - - - * - __u8 - - ``slice_type`` - - - * - __u8 - - ``colour_plane_id`` - - - * - __u8 - - ``redundant_pic_cnt`` - - - * - __u8 - - ``cabac_init_idc`` - - - * - __s8 - - ``slice_qp_delta`` - - - * - __s8 - - ``slice_qs_delta`` - - - * - __u8 - - ``disable_deblocking_filter_idc`` - - - * - __s8 - - ``slice_alpha_c0_offset_div2`` - - - * - __s8 - - ``slice_beta_offset_div2`` - - - * - __u8 - - ``num_ref_idx_l0_active_minus1`` - - If num_ref_idx_active_override_flag is not set, this field must be - set to the value of num_ref_idx_l0_default_active_minus1. - * - __u8 - - ``num_ref_idx_l1_active_minus1`` - - If num_ref_idx_active_override_flag is not set, this field must be - set to the value of num_ref_idx_l1_default_active_minus1. - * - __u8 - - ``reserved`` - - Applications and drivers must set this to zero. - * - struct :c:type:`v4l2_h264_reference` - - ``ref_pic_list0[32]`` - - Reference picture list after applying the per-slice modifications - * - struct :c:type:`v4l2_h264_reference` - - ``ref_pic_list1[32]`` - - Reference picture list after applying the per-slice modifications - * - __u32 - - ``flags`` - - See :ref:`Slice Parameter Flags <h264_slice_flags>` - -.. _h264_slice_flags: - -``Slice Parameter Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED`` - - 0x00000001 - - - * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH`` - - 0x00000002 - - - -``V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS (struct)`` - Prediction weight table defined according to :ref:`h264`, - section 7.4.3.2 "Prediction Weight Table Semantics". - The prediction weight table must be passed by applications - under the conditions explained in section 7.3.3 "Slice header - syntax". - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_h264_pred_weights - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_h264_pred_weights - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u16 - - ``luma_log2_weight_denom`` - - - * - __u16 - - ``chroma_log2_weight_denom`` - - - * - struct :c:type:`v4l2_h264_weight_factors` - - ``weight_factors[2]`` - - The weight factors at index 0 are the weight factors for the reference - list 0, the one at index 1 for the reference list 1. - -.. c:type:: v4l2_h264_weight_factors - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_h264_weight_factors - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s16 - - ``luma_weight[32]`` - - - * - __s16 - - ``luma_offset[32]`` - - - * - __s16 - - ``chroma_weight[32][2]`` - - - * - __s16 - - ``chroma_offset[32][2]`` - - - -``Picture Reference`` - -.. c:type:: v4l2_h264_reference - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_h264_reference - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``fields`` - - Specifies how the picture is referenced. See :ref:`Reference Fields <h264_ref_fields>` - * - __u8 - - ``index`` - - Index into the :c:type:`v4l2_ctrl_h264_decode_params`.dpb array. - -.. _h264_ref_fields: - -``Reference Fields`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_TOP_FIELD_REF`` - - 0x1 - - The top field in field pair is used for short-term reference. - * - ``V4L2_H264_BOTTOM_FIELD_REF`` - - 0x2 - - The bottom field in field pair is used for short-term reference. - * - ``V4L2_H264_FRAME_REF`` - - 0x3 - - The frame (or the top/bottom fields, if it's a field pair) - is used for short-term reference. - -``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)`` - Specifies the decode parameters (as extracted from the bitstream) - for the associated H264 slice data. This includes the necessary - parameters for configuring a stateless hardware decoding pipeline - for H264. The bitstream parameters are defined according to - :ref:`h264`. For further documentation, refer to the above - specification, unless there is an explicit comment stating - otherwise. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_h264_decode_params - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_h264_decode_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - struct :c:type:`v4l2_h264_dpb_entry` - - ``dpb[16]`` - - - * - __u16 - - ``nal_ref_idc`` - - NAL reference ID value coming from the NAL Unit header - * - __u16 - - ``frame_num`` - - - * - __s32 - - ``top_field_order_cnt`` - - Picture Order Count for the coded top field - * - __s32 - - ``bottom_field_order_cnt`` - - Picture Order Count for the coded bottom field - * - __u16 - - ``idr_pic_id`` - - - * - __u16 - - ``pic_order_cnt_lsb`` - - - * - __s32 - - ``delta_pic_order_cnt_bottom`` - - - * - __s32 - - ``delta_pic_order_cnt0`` - - - * - __s32 - - ``delta_pic_order_cnt1`` - - - * - __u32 - - ``dec_ref_pic_marking_bit_size`` - - Size in bits of the dec_ref_pic_marking() syntax element. - * - __u32 - - ``pic_order_cnt_bit_size`` - - Combined size in bits of the picture order count related syntax - elements: pic_order_cnt_lsb, delta_pic_order_cnt_bottom, - delta_pic_order_cnt0, and delta_pic_order_cnt1. - * - __u32 - - ``slice_group_change_cycle`` - - - * - __u32 - - ``reserved`` - - Applications and drivers must set this to zero. - * - __u32 - - ``flags`` - - See :ref:`Decode Parameters Flags <h264_decode_params_flags>` - -.. _h264_decode_params_flags: - -``Decode Parameters Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC`` - - 0x00000001 - - That picture is an IDR picture - * - ``V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC`` - - 0x00000002 - - - * - ``V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD`` - - 0x00000004 - - - -.. c:type:: v4l2_h264_dpb_entry - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_h264_dpb_entry - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u64 - - ``reference_ts`` - - Timestamp of the V4L2 capture buffer to use as reference, used - with B-coded and P-coded frames. The timestamp refers to the - ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the - :c:func:`v4l2_timeval_to_ns()` function to convert the struct - :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. - * - __u32 - - ``pic_num`` - - - * - __u16 - - ``frame_num`` - - - * - __u8 - - ``fields`` - - Specifies how the DPB entry is referenced. See :ref:`Reference Fields <h264_ref_fields>` - * - __u8 - - ``reserved[5]`` - - Applications and drivers must set this to zero. - * - __s32 - - ``top_field_order_cnt`` - - - * - __s32 - - ``bottom_field_order_cnt`` - - - * - __u32 - - ``flags`` - - See :ref:`DPB Entry Flags <h264_dpb_flags>` - -.. _h264_dpb_flags: - -``DPB Entries Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID`` - - 0x00000001 - - The DPB entry is valid (non-empty) and should be considered. - * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE`` - - 0x00000002 - - The DPB entry is used for reference. - * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM`` - - 0x00000004 - - The DPB entry is used for long-term reference. - * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD`` - - 0x00000008 - - The DPB entry is a single field or a complementary field pair. - -``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)`` - Specifies the decoding mode to use. Currently exposes slice-based and - frame-based decoding but new modes might be added later on. - This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE - pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE - are required to set this control in order to specify the decoding mode - that is expected for the buffer. - Drivers may expose a single or multiple decoding modes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_mpeg_video_h264_decode_mode - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED`` - - 0 - - Decoding is done at the slice granularity. - The OUTPUT buffer must contain a single slice. - When this mode is selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` - control shall be set. When multiple slices compose a frame, - use of ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` flag - is required. - * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED`` - - 1 - - Decoding is done at the frame granularity, - The OUTPUT buffer must contain all slices needed to decode the - frame. The OUTPUT buffer must also contain both fields. - This mode will be supported by devices that - parse the slice(s) header(s) in hardware. When this mode is - selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` - control shall not be set. - -``V4L2_CID_MPEG_VIDEO_H264_START_CODE (enum)`` - Specifies the H264 slice start code expected for each slice. - This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE - pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE - are required to set this control in order to specify the start code - that is expected for the buffer. - Drivers may expose a single or multiple start codes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_mpeg_video_h264_start_code - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_MPEG_VIDEO_H264_START_CODE_NONE`` - - 0 - - Selecting this value specifies that H264 slices are passed - to the driver without any start code. - * - ``V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B`` - - 1 - - Selecting this value specifies that H264 slices are expected - to be prefixed by Annex B start codes. According to :ref:`h264` - valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L6_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 6 for H264 encoder. .. _v4l2-mpeg-mpeg2: @@ -2905,127 +2245,6 @@ enum v4l2_mpeg_mfc51_video_force_frame_type - - Force a non-coded frame. -.. _v4l2-mpeg-fwht: - -``V4L2_CID_MPEG_VIDEO_FWHT_PARAMS (struct)`` - Specifies the fwht parameters (as extracted from the bitstream) for the - associated FWHT data. This includes the necessary parameters for - configuring a stateless hardware decoding pipeline for FWHT. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_fwht_params - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.4cm}|p{4.3cm}|p{11.8cm}| - -.. flat-table:: struct v4l2_ctrl_fwht_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u64 - - ``backward_ref_ts`` - - Timestamp of the V4L2 capture buffer to use as backward reference, used - with P-coded frames. The timestamp refers to the - ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the - :c:func:`v4l2_timeval_to_ns()` function to convert the struct - :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. - * - __u32 - - ``version`` - - The version of the codec - * - __u32 - - ``width`` - - The width of the frame - * - __u32 - - ``height`` - - The height of the frame - * - __u32 - - ``flags`` - - The flags of the frame, see :ref:`fwht-flags`. - * - __u32 - - ``colorspace`` - - The colorspace of the frame, from enum :c:type:`v4l2_colorspace`. - * - __u32 - - ``xfer_func`` - - The transfer function, from enum :c:type:`v4l2_xfer_func`. - * - __u32 - - ``ycbcr_enc`` - - The Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`. - * - __u32 - - ``quantization`` - - The quantization range, from enum :c:type:`v4l2_quantization`. - - - -.. _fwht-flags: - -FWHT Flags -============ - -.. cssclass:: longtable - -.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.3cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 3 1 4 - - * - ``FWHT_FL_IS_INTERLACED`` - - 0x00000001 - - Set if this is an interlaced format - * - ``FWHT_FL_IS_BOTTOM_FIRST`` - - 0x00000002 - - Set if this is a bottom-first (NTSC) interlaced format - * - ``FWHT_FL_IS_ALTERNATE`` - - 0x00000004 - - Set if each 'frame' contains just one field - * - ``FWHT_FL_IS_BOTTOM_FIELD`` - - 0x00000008 - - If FWHT_FL_IS_ALTERNATE was set, then this is set if this 'frame' is the - bottom field, else it is the top field. - * - ``FWHT_FL_LUMA_IS_UNCOMPRESSED`` - - 0x00000010 - - Set if the luma plane is uncompressed - * - ``FWHT_FL_CB_IS_UNCOMPRESSED`` - - 0x00000020 - - Set if the cb plane is uncompressed - * - ``FWHT_FL_CR_IS_UNCOMPRESSED`` - - 0x00000040 - - Set if the cr plane is uncompressed - * - ``FWHT_FL_CHROMA_FULL_HEIGHT`` - - 0x00000080 - - Set if the chroma plane has the same height as the luma plane, - else the chroma plane is half the height of the luma plane - * - ``FWHT_FL_CHROMA_FULL_WIDTH`` - - 0x00000100 - - Set if the chroma plane has the same width as the luma plane, - else the chroma plane is half the width of the luma plane - * - ``FWHT_FL_ALPHA_IS_UNCOMPRESSED`` - - 0x00000200 - - Set if the alpha plane is uncompressed - * - ``FWHT_FL_I_FRAME`` - - 0x00000400 - - Set if this is an I-frame - * - ``FWHT_FL_COMPONENTS_NUM_MSK`` - - 0x00070000 - - A 4-values flag - the number of components - 1 - * - ``FWHT_FL_PIXENC_YUV`` - - 0x00080000 - - Set if the pixel encoding is YUV - * - ``FWHT_FL_PIXENC_RGB`` - - 0x00100000 - - Set if the pixel encoding is RGB - * - ``FWHT_FL_PIXENC_HSV`` - - 0x00180000 - - Set if the pixel encoding is HSV - - CX2341x MPEG Controls ===================== @@ -3441,11 +2660,11 @@ HEVC/H.265 Control IDs ``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)`` Minimum quantization parameter for HEVC. - Valid range: from 0 to 51. + Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. ``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)`` Maximum quantization parameter for HEVC. - Valid range: from 0 to 51. + Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. ``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)`` Quantization parameter for an I frame for HEVC. @@ -3462,6 +2681,42 @@ HEVC/H.265 Control IDs Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the HEVC I frame to limit I frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the HEVC I frame to limit I frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the HEVC P frame to limit P frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the HEVC P frame to limit P frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the HEVC B frame to limit B frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the HEVC B frame to limit B frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + ``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)`` HIERARCHICAL_QP allows the host to specify the quantization parameter values for each temporal layer through HIERARCHICAL_QP_LAYER. This is @@ -4382,3 +3637,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - - Selecting this value specifies that HEVC slices are expected to be prefixed by Annex B start codes. According to :ref:`hevc` valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. + +``V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (integer)`` + Specifies a priority identifier for the NAL unit, which will be applied to + the base layer. By default this value is set to 0 for the base layer, + and the next layer will have the priority ID assigned as 1, 2, 3 and so on. + The video encoder can't decide the priority id to be applied to a layer, + so this has to come from client. + This is applicable to H264 and valid Range is from 0 to 63. + Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1. |