diff options
Diffstat (limited to 'Documentation')
4 files changed, 195 insertions, 7 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes index 8ea59fea4709..3348bf80a37c 100644 --- a/Documentation/ABI/testing/sysfs-class-firmware-attributes +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes @@ -197,8 +197,24 @@ Description: Drivers may emit a CHANGE uevent when a password is set or unset userspace may check it again. - On Dell systems, if Admin password is set, then all BIOS attributes + On Dell and Lenovo systems, if Admin password is set, then all BIOS attributes require password validation. + On Lenovo systems if you change the Admin password the new password is not active until + the next boot. + + Lenovo specific class extensions + ------------------------------ + + On Lenovo systems the following additional settings are available: + + lenovo_encoding: + The encoding method that is used. This can be either "ascii" + or "scancode". Default is set to "ascii" + + lenovo_kbdlang: + The keyboard language method that is used. This is generally a + two char code (e.g. "us", "fr", "gr") and may vary per platform. + Default is set to "us" What: /sys/class/firmware-attributes/*/attributes/pending_reboot Date: February 2021 diff --git a/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi new file mode 100644 index 000000000000..7f9e18705861 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi @@ -0,0 +1,55 @@ +What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type +Date: Apr 2021 +KernelVersion: 5.13 +Contact: "perry.yuan@dell.com>" +Description: + Display which dell hardware level privacy devices are supported + “Dell Privacy” is a set of HW, FW, and SW features to enhance + Dell’s commitment to platform privacy for MIC, Camera, and + ePrivacy screens. + The supported hardware privacy devices are: +Attributes: + Microphone Mute: + Identifies the local microphone can be muted by hardware, no applications + is available to capture system mic sound + + Camera Shutter: + Identifies camera shutter controlled by hardware, which is a micromechanical + shutter assembly that is built onto the camera module to block capturing images + from outside the laptop + + supported: + The privacy device is supported by this system + + unsupported: + The privacy device is not supported on this system + + For example to check which privacy devices are supported: + + # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type + [Microphone Mute] [supported] + [Camera Shutter] [supported] + [ePrivacy Screen] [unsupported] + +What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state +Date: Apr 2021 +KernelVersion: 5.13 +Contact: "perry.yuan@dell.com>" +Description: + Allow user space to check current dell privacy device state. + Describes the Device State class exposed by BIOS which can be + consumed by various applications interested in knowing the Privacy + feature capabilities +Attributes: + muted: + Identifies the privacy device is turned off and cannot send stream to OS applications + + unmuted: + Identifies the privacy device is turned on ,audio or camera driver can get + stream from mic and camera module to OS applications + + For example to check all supported current privacy device states: + + # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state + [Microphone] [unmuted] + [Camera Shutter] [unmuted] diff --git a/Documentation/driver-api/surface_aggregator/clients/cdev.rst b/Documentation/driver-api/surface_aggregator/clients/cdev.rst index 248c1372d879..0134a841a079 100644 --- a/Documentation/driver-api/surface_aggregator/clients/cdev.rst +++ b/Documentation/driver-api/surface_aggregator/clients/cdev.rst @@ -1,9 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0+ -.. |u8| replace:: :c:type:`u8 <u8>` -.. |u16| replace:: :c:type:`u16 <u16>` .. |ssam_cdev_request| replace:: :c:type:`struct ssam_cdev_request <ssam_cdev_request>` .. |ssam_cdev_request_flags| replace:: :c:type:`enum ssam_cdev_request_flags <ssam_cdev_request_flags>` +.. |ssam_cdev_event| replace:: :c:type:`struct ssam_cdev_event <ssam_cdev_event>` ============================== User-Space EC Interface (cdev) @@ -23,6 +22,40 @@ These IOCTLs and their respective input/output parameter structs are defined in A small python library and scripts for accessing this interface can be found at https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam. +.. contents:: + + +Receiving Events +================ + +Events can be received by reading from the device-file. The are represented by +the |ssam_cdev_event| datatype. + +Before events are available to be read, however, the desired notifiers must be +registered via the ``SSAM_CDEV_NOTIF_REGISTER`` IOCTL. Notifiers are, in +essence, callbacks, called when the EC sends an event. They are, in this +interface, associated with a specific target category and device-file-instance. +They forward any event of this category to the buffer of the corresponding +instance, from which it can then be read. + +Notifiers themselves do not enable events on the EC. Thus, it may additionally +be necessary to enable events via the ``SSAM_CDEV_EVENT_ENABLE`` IOCTL. While +notifiers work per-client (i.e. per-device-file-instance), events are enabled +globally, for the EC and all of its clients (regardless of userspace or +non-userspace). The ``SSAM_CDEV_EVENT_ENABLE`` and ``SSAM_CDEV_EVENT_DISABLE`` +IOCTLs take care of reference counting the events, such that an event is +enabled as long as there is a client that has requested it. + +Note that enabled events are not automatically disabled once the client +instance is closed. Therefore any client process (or group of processes) should +balance their event enable calls with the corresponding event disable calls. It +is, however, perfectly valid to enable and disable events on different client +instances. For example, it is valid to set up notifiers and read events on +client instance ``A``, enable those events on instance ``B`` (note that these +will also be received by A since events are enabled/disabled globally), and +after no more events are desired, disable the previously enabled events via +instance ``C``. + Controller IOCTLs ================= @@ -45,9 +78,33 @@ The following IOCTLs are provided: - ``REQUEST`` - Perform synchronous SAM request. + * - ``0xA5`` + - ``2`` + - ``W`` + - ``NOTIF_REGISTER`` + - Register event notifier. -``REQUEST`` ------------ + * - ``0xA5`` + - ``3`` + - ``W`` + - ``NOTIF_UNREGISTER`` + - Unregister event notifier. + + * - ``0xA5`` + - ``4`` + - ``W`` + - ``EVENT_ENABLE`` + - Enable event source. + + * - ``0xA5`` + - ``5`` + - ``W`` + - ``EVENT_DISABLE`` + - Disable event source. + + +``SSAM_CDEV_REQUEST`` +--------------------- Defined as ``_IOWR(0xA5, 1, struct ssam_cdev_request)``. @@ -82,6 +139,66 @@ submitted, and completed (i.e. handed back to user-space) successfully from inside the IOCTL, but the request ``status`` member may still be negative in case the actual execution of the request failed after it has been submitted. -A full definition of the argument struct is provided below: +A full definition of the argument struct is provided below. + +``SSAM_CDEV_NOTIF_REGISTER`` +---------------------------- + +Defined as ``_IOW(0xA5, 2, struct ssam_cdev_notifier_desc)``. + +Register a notifier for the event target category specified in the given +notifier description with the specified priority. Notifiers registration is +required to receive events, but does not enable events themselves. After a +notifier for a specific target category has been registered, all events of that +category will be forwarded to the userspace client and can then be read from +the device file instance. Note that events may have to be enabled, e.g. via the +``SSAM_CDEV_EVENT_ENABLE`` IOCTL, before the EC will send them. + +Only one notifier can be registered per target category and client instance. If +a notifier has already been registered, this IOCTL will fail with ``-EEXIST``. + +Notifiers will automatically be removed when the device file instance is +closed. + +``SSAM_CDEV_NOTIF_UNREGISTER`` +------------------------------ + +Defined as ``_IOW(0xA5, 3, struct ssam_cdev_notifier_desc)``. + +Unregisters the notifier associated with the specified target category. The +priority field will be ignored by this IOCTL. If no notifier has been +registered for this client instance and the given category, this IOCTL will +fail with ``-ENOENT``. + +``SSAM_CDEV_EVENT_ENABLE`` +-------------------------- + +Defined as ``_IOW(0xA5, 4, struct ssam_cdev_event_desc)``. + +Enable the event associated with the given event descriptor. + +Note that this call will not register a notifier itself, it will only enable +events on the controller. If you want to receive events by reading from the +device file, you will need to register the corresponding notifier(s) on that +instance. + +Events are not automatically disabled when the device file is closed. This must +be done manually, via a call to the ``SSAM_CDEV_EVENT_DISABLE`` IOCTL. + +``SSAM_CDEV_EVENT_DISABLE`` +--------------------------- + +Defined as ``_IOW(0xA5, 5, struct ssam_cdev_event_desc)``. + +Disable the event associated with the given event descriptor. + +Note that this will not unregister any notifiers. Events may still be received +and forwarded to user-space after this call. The only safe way of stopping +events from being received is unregistering all previously registered +notifiers. + + +Structures and Enums +==================== .. kernel-doc:: include/uapi/linux/surface_aggregator/cdev.h diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 9bfc2b510c64..1409e40e6345 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -325,7 +325,7 @@ Code Seq# Include File Comments 0xA3 90-9F linux/dtlk.h 0xA4 00-1F uapi/linux/tee.h Generic TEE subsystem 0xA4 00-1F uapi/asm/sgx.h <mailto:linux-sgx@vger.kernel.org> -0xA5 01 linux/surface_aggregator/cdev.h Microsoft Surface Platform System Aggregator +0xA5 01-05 linux/surface_aggregator/cdev.h Microsoft Surface Platform System Aggregator <mailto:luzmaximilian@gmail.com> 0xA5 20-2F linux/surface_aggregator/dtx.h Microsoft Surface DTX driver <mailto:luzmaximilian@gmail.com> |