summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-ata171
-rw-r--r--Documentation/ABI/testing/sysfs-block-device58
-rw-r--r--Documentation/ABI/testing/sysfs-class-scsi_host89
-rw-r--r--Documentation/ABI/testing/sysfs-devices-platform-dock39
-rw-r--r--Documentation/ABI/testing/sysfs-devices-system-cpu77
-rw-r--r--Documentation/ABI/testing/sysfs-platform-dptf40
-rw-r--r--Documentation/PCI/pci.txt4
-rw-r--r--Documentation/accelerators/ocxl.rst5
-rw-r--r--Documentation/atomic_bitops.txt7
-rw-r--r--Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt (renamed from Documentation/devicetree/bindings/misc/arm-charlcd.txt)0
-rw-r--r--Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt58
-rw-r--r--Documentation/devicetree/bindings/display/connector/dvi-connector.txt1
-rw-r--r--Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt24
-rw-r--r--Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt1
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi.txt26
-rw-r--r--Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt12
-rw-r--r--Documentation/devicetree/bindings/display/panel/display-timing.txt5
-rw-r--r--Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt25
-rw-r--r--Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt2
-rw-r--r--Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt25
-rw-r--r--Documentation/devicetree/bindings/display/panel/simple-panel.txt4
-rw-r--r--Documentation/devicetree/bindings/display/renesas,du.txt35
-rw-r--r--Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt45
-rw-r--r--Documentation/devicetree/bindings/dma/mv-xor-v2.txt6
-rw-r--r--Documentation/devicetree/bindings/eeprom/at24.txt2
-rw-r--r--Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt4
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt1
-rw-r--r--Documentation/devicetree/bindings/net/dsa/marvell.txt48
-rw-r--r--Documentation/devicetree/bindings/net/renesas,ravb.txt7
-rw-r--r--Documentation/devicetree/bindings/power/mti,mips-cpc.txt8
-rw-r--r--Documentation/devicetree/bindings/power/wakeup-source.txt2
-rw-r--r--Documentation/devicetree/bindings/thermal/imx-thermal.txt25
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/renesas_usb3.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/renesas_usbhs.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/usb-xhci.txt1
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--Documentation/devicetree/overlay-notes.txt4
-rw-r--r--Documentation/features/sched/membarrier-sync-core/arch-support.txt62
-rw-r--r--Documentation/gpu/drivers.rst21
-rw-r--r--Documentation/gpu/drm-kms.rst3
-rw-r--r--Documentation/gpu/index.rst9
-rw-r--r--Documentation/gpu/tve200.rst2
-rw-r--r--Documentation/i2c/busses/i2c-i8012
-rw-r--r--Documentation/ia64/serial.txt2
-rw-r--r--Documentation/locking/mutex-design.txt49
-rw-r--r--Documentation/media/dmx.h.rst.exceptions14
-rw-r--r--Documentation/media/uapi/dvb/dmx-qbuf.rst7
-rw-r--r--Documentation/networking/segmentation-offloads.txt52
-rw-r--r--Documentation/sphinx/kerneldoc.py3
-rw-r--r--Documentation/virtual/kvm/api.txt40
-rw-r--r--Documentation/virtual/kvm/cpuid.txt4
-rw-r--r--Documentation/virtual/kvm/msr.txt3
-rw-r--r--Documentation/x86/intel_rdt_ui.txt2
-rw-r--r--Documentation/x86/topology.txt2
55 files changed, 913 insertions, 230 deletions
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata
index aa4296498859..9ab0ef1dd1c7 100644
--- a/Documentation/ABI/testing/sysfs-ata
+++ b/Documentation/ABI/testing/sysfs-ata
@@ -1,110 +1,139 @@
What: /sys/class/ata_...
-Date: August 2008
-Contact: Gwendal Grignou<gwendal@google.com>
Description:
-
-Provide a place in sysfs for storing the ATA topology of the system. This allows
-retrieving various information about ATA objects.
+ Provide a place in sysfs for storing the ATA topology of the
+ system. This allows retrieving various information about ATA
+ objects.
Files under /sys/class/ata_port
-------------------------------
- For each port, a directory ataX is created where X is the ata_port_id of
- the port. The device parent is the ata host device.
+For each port, a directory ataX is created where X is the ata_port_id of the
+port. The device parent is the ata host device.
-idle_irq (read)
- Number of IRQ received by the port while idle [some ata HBA only].
+What: /sys/class/ata_port/ataX/nr_pmp_links
+What: /sys/class/ata_port/ataX/idle_irq
+Date: May, 2010
+KernelVersion: v2.6.37
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ nr_pmp_links: (RO) If a SATA Port Multiplier (PM) is
+ connected, the number of links behind it.
-nr_pmp_links (read)
+ idle_irq: (RO) Number of IRQ received by the port while
+ idle [some ata HBA only].
- If a SATA Port Multiplier (PM) is connected, number of link behind it.
+
+What: /sys/class/ata_port/ataX/port_no
+Date: May, 2013
+KernelVersion: v3.11
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ (RO) Host local port number. While registering host controller,
+ port numbers are tracked based upon number of ports available on
+ the controller. This attribute is needed by udev for composing
+ persistent links in /dev/disk/by-path.
Files under /sys/class/ata_link
-------------------------------
- Behind each port, there is a ata_link. If there is a SATA PM in the
- topology, 15 ata_link objects are created.
-
- If a link is behind a port, the directory name is linkX, where X is
- ata_port_id of the port.
- If a link is behind a PM, its name is linkX.Y where X is ata_port_id
- of the parent port and Y the PM port.
+Behind each port, there is a ata_link. If there is a SATA PM in the topology, 15
+ata_link objects are created.
-hw_sata_spd_limit
+If a link is behind a port, the directory name is linkX, where X is ata_port_id
+of the port. If a link is behind a PM, its name is linkX.Y where X is
+ata_port_id of the parent port and Y the PM port.
- Maximum speed supported by the connected SATA device.
-sata_spd_limit
+What: /sys/class/ata_link/linkX[.Y]/hw_sata_spd_limit
+What: /sys/class/ata_link/linkX[.Y]/sata_spd_limit
+What: /sys/class/ata_link/linkX[.Y]/sata_spd
+Date: May, 2010
+KernelVersion: v2.6.37
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ hw_sata_spd_limit: (RO) Maximum speed supported by the
+ connected SATA device.
- Maximum speed imposed by libata.
+ sata_spd_limit: (RO) Maximum speed imposed by libata.
-sata_spd
+ sata_spd: (RO) Current speed of the link
+ eg. 1.5, 3 Gbps etc.
- Current speed of the link [1.5, 3Gps,...].
Files under /sys/class/ata_device
---------------------------------
- Behind each link, up to two ata device are created.
- The name of the directory is devX[.Y].Z where:
- - X is ata_port_id of the port where the device is connected,
- - Y the port of the PM if any, and
- - Z the device id: for PATA, there is usually 2 devices [0,1],
- only 1 for SATA.
-
-class
- Device class. Can be "ata" for disk, "atapi" for packet device,
- "pmp" for PM, or "none" if no device was found behind the link.
-
-dma_mode
+Behind each link, up to two ata devices are created.
+The name of the directory is devX[.Y].Z where:
+- X is ata_port_id of the port where the device is connected,
+- Y the port of the PM if any, and
+- Z the device id: for PATA, there is usually 2 devices [0,1], only 1 for SATA.
+
+
+What: /sys/class/ata_device/devX[.Y].Z/spdn_cnt
+What: /sys/class/ata_device/devX[.Y].Z/gscr
+What: /sys/class/ata_device/devX[.Y].Z/ering
+What: /sys/class/ata_device/devX[.Y].Z/id
+What: /sys/class/ata_device/devX[.Y].Z/pio_mode
+What: /sys/class/ata_device/devX[.Y].Z/xfer_mode
+What: /sys/class/ata_device/devX[.Y].Z/dma_mode
+What: /sys/class/ata_device/devX[.Y].Z/class
+Date: May, 2010
+KernelVersion: v2.6.37
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ spdn_cnt: (RO) Number of times libata decided to lower the
+ speed of link due to errors.
- Transfer modes supported by the device when in DMA mode.
- Mostly used by PATA device.
+ gscr: (RO) Cached result of the dump of PM GSCR
+ register. Valid registers are:
-pio_mode
+ 0: SATA_PMP_GSCR_PROD_ID,
+ 1: SATA_PMP_GSCR_REV,
+ 2: SATA_PMP_GSCR_PORT_INFO,
+ 32: SATA_PMP_GSCR_ERROR,
+ 33: SATA_PMP_GSCR_ERROR_EN,
+ 64: SATA_PMP_GSCR_FEAT,
+ 96: SATA_PMP_GSCR_FEAT_EN,
+ 130: SATA_PMP_GSCR_SII_GPIO
- Transfer modes supported by the device when in PIO mode.
- Mostly used by PATA device.
+ Only valid if the device is a PM.
-xfer_mode
+ ering: (RO) Formatted output of the error ring of the
+ device.
- Current transfer mode.
+ id: (RO) Cached result of IDENTIFY command, as
+ described in ATA8 7.16 and 7.17. Only valid if
+ the device is not a PM.
-id
+ pio_mode: (RO) Transfer modes supported by the device when
+ in PIO mode. Mostly used by PATA device.
- Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
- Only valid if the device is not a PM.
+ xfer_mode: (RO) Current transfer mode
-gscr
+ dma_mode: (RO) Transfer modes supported by the device when
+ in DMA mode. Mostly used by PATA device.
- Cached result of the dump of PM GSCR register.
- Valid registers are:
- 0: SATA_PMP_GSCR_PROD_ID,
- 1: SATA_PMP_GSCR_REV,
- 2: SATA_PMP_GSCR_PORT_INFO,
- 32: SATA_PMP_GSCR_ERROR,
- 33: SATA_PMP_GSCR_ERROR_EN,
- 64: SATA_PMP_GSCR_FEAT,
- 96: SATA_PMP_GSCR_FEAT_EN,
- 130: SATA_PMP_GSCR_SII_GPIO
- Only valid if the device is a PM.
+ class: (RO) Device class. Can be "ata" for disk,
+ "atapi" for packet device, "pmp" for PM, or
+ "none" if no device was found behind the link.
-trim
- Shows the DSM TRIM mode currently used by the device. Valid
- values are:
- unsupported: Drive does not support DSM TRIM
- unqueued: Drive supports unqueued DSM TRIM only
- queued: Drive supports queued DSM TRIM
- forced_unqueued: Drive's queued DSM support is known to be
- buggy and only unqueued TRIM commands
- are sent
+What: /sys/class/ata_device/devX[.Y].Z/trim
+Date: May, 2015
+KernelVersion: v4.10
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ (RO) Shows the DSM TRIM mode currently used by the device. Valid
+ values are:
-spdn_cnt
+ unsupported: Drive does not support DSM TRIM
- Number of time libata decided to lower the speed of link due to errors.
+ unqueued: Drive supports unqueued DSM TRIM only
-ering
+ queued: Drive supports queued DSM TRIM
- Formatted output of the error ring of the device.
+ forced_unqueued: Drive's queued DSM support is known to
+ be buggy and only unqueued TRIM commands
+ are sent
diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device
new file mode 100644
index 000000000000..82ef6eab042d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-block-device
@@ -0,0 +1,58 @@
+What: /sys/block/*/device/sw_activity
+Date: Jun, 2008
+KernelVersion: v2.6.27
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) Used by drivers which support software controlled activity
+ LEDs.
+
+ It has the following valid values:
+
+ 0 OFF - the LED is not activated on activity
+ 1 BLINK_ON - the LED blinks on every 10ms when activity is
+ detected.
+ 2 BLINK_OFF - the LED is on when idle, and blinks off
+ every 10ms when activity is detected.
+
+ Note that the user must turn sw_activity OFF it they wish to
+ control the activity LED via the em_message file.
+
+
+What: /sys/block/*/device/unload_heads
+Date: Sep, 2008
+KernelVersion: v2.6.28
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) Hard disk shock protection
+
+ Writing an integer value to this file will take the heads of the
+ respective drive off the platter and block all I/O operations
+ for the specified number of milliseconds.
+
+ - If the device does not support the unload heads feature,
+ access is denied with -EOPNOTSUPP.
+ - The maximal value accepted for a timeout is 30000
+ milliseconds.
+ - A previously set timeout can be cancelled and disk can resume
+ normal operation immediately by specifying a timeout of 0.
+ - Some hard drives only comply with an earlier version of the
+ ATA standard, but support the unload feature nonetheless.
+ There is no safe way Linux can detect these devices, so this
+ is not enabled by default. If it is known that your device
+ does support the unload feature, then you can tell the kernel
+ to enable it by writing -1. It can be disabled again by
+ writing -2.
+ - Values below -2 are rejected with -EINVAL
+
+ For more information, see
+ Documentation/laptops/disk-shock-protection.txt
+
+
+What: /sys/block/*/device/ncq_prio_enable
+Date: Oct, 2016
+KernelVersion: v4.10
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) Write to the file to turn on or off the SATA ncq (native
+ command queueing) support. By default this feature is turned
+ off.
diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host
index 0eb255e7db12..bafc59fd7b69 100644
--- a/Documentation/ABI/testing/sysfs-class-scsi_host
+++ b/Documentation/ABI/testing/sysfs-class-scsi_host
@@ -27,3 +27,92 @@ Description: This file contains the current status of the "SSD Smart Path"
the direct i/o path to physical devices. This setting is
controller wide, affecting all configured logical drives on the
controller. This file is readable and writable.
+
+What: /sys/class/scsi_host/hostX/link_power_management_policy
+Date: Oct, 2007
+KernelVersion: v2.6.24
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) This parameter allows the user to read and set the link
+ (interface) power management.
+
+ There are four possible options:
+
+ min_power: Tell the controller to try to make the link use the
+ least possible power when possible. This may sacrifice some
+ performance due to increased latency when coming out of lower
+ power states.
+
+ max_performance: Generally, this means no power management.
+ Tell the controller to have performance be a priority over power
+ management.
+
+ medium_power: Tell the controller to enter a lower power state
+ when possible, but do not enter the lowest power state, thus
+ improving latency over min_power setting.
+
+ med_power_with_dipm: Identical to the existing medium_power
+ setting except that it enables dipm (device initiated power
+ management) on top, which makes it match the Windows IRST (Intel
+ Rapid Storage Technology) driver settings. This setting is also
+ close to min_power, except that:
+ a) It does not use host-initiated slumber mode, but it does
+ allow device-initiated slumber
+ b) It does not enable low power device sleep mode (DevSlp).
+
+What: /sys/class/scsi_host/hostX/em_message
+What: /sys/class/scsi_host/hostX/em_message_type
+Date: Jun, 2008
+KernelVersion: v2.6.27
+Contact: linux-ide@vger.kernel.org
+Description:
+ em_message: (RW) Enclosure management support. For the LED
+ protocol, writes and reads correspond to the LED message format
+ as defined in the AHCI spec.
+
+ The user must turn sw_activity (under /sys/block/*/device/) OFF
+ it they wish to control the activity LED via the em_message
+ file.
+
+ em_message_type: (RO) Displays the current enclosure management
+ protocol that is being used by the driver (for eg. LED, SAF-TE,
+ SES-2, SGPIO etc).
+
+What: /sys/class/scsi_host/hostX/ahci_port_cmd
+What: /sys/class/scsi_host/hostX/ahci_host_caps
+What: /sys/class/scsi_host/hostX/ahci_host_cap2
+Date: Mar, 2010
+KernelVersion: v2.6.35
+Contact: linux-ide@vger.kernel.org
+Description:
+ [to be documented]
+
+What: /sys/class/scsi_host/hostX/ahci_host_version
+Date: Mar, 2010
+KernelVersion: v2.6.35
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RO) Display the version of the AHCI spec implemented by the
+ host.
+
+What: /sys/class/scsi_host/hostX/em_buffer
+Date: Apr, 2010
+KernelVersion: v2.6.35
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) Allows access to AHCI EM (enclosure management) buffer
+ directly if the host supports EM.
+
+ For eg. the AHCI driver supports SGPIO EM messages but the
+ SATA/AHCI specs do not define the SGPIO message format of the EM
+ buffer. Different hardware(HW) vendors may have different
+ definitions. With the em_buffer attribute, this issue can be
+ solved by allowing HW vendors to provide userland drivers and
+ tools for their SGPIO initiators.
+
+What: /sys/class/scsi_host/hostX/em_message_supported
+Date: Oct, 2009
+KernelVersion: v2.6.39
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RO) Displays supported enclosure management message types.
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-dock b/Documentation/ABI/testing/sysfs-devices-platform-dock
new file mode 100644
index 000000000000..1d8c18f905c7
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-dock
@@ -0,0 +1,39 @@
+What: /sys/devices/platform/dock.N/docked
+Date: Dec, 2006
+KernelVersion: 2.6.19
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RO) Value 1 or 0 indicates whether the software believes the
+ laptop is docked in a docking station.
+
+What: /sys/devices/platform/dock.N/undock
+Date: Dec, 2006
+KernelVersion: 2.6.19
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (WO) Writing to this file causes the software to initiate an
+ undock request to the firmware.
+
+What: /sys/devices/platform/dock.N/uid
+Date: Feb, 2007
+KernelVersion: v2.6.21
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RO) Displays the docking station the laptop is docked to.
+
+What: /sys/devices/platform/dock.N/flags
+Date: May, 2007
+KernelVersion: v2.6.21
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RO) Show dock station flags, useful for checking if undock
+ request has been made by the user (from the immediate_undock
+ option).
+
+What: /sys/devices/platform/dock.N/type
+Date: Aug, 2008
+KernelVersion: v2.6.27
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RO) Display the dock station type- dock_station, ata_bay or
+ battery_bay.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index bfd29bc8d37a..4ed63b6cfb15 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -108,6 +108,8 @@ Description: CPU topology files that describe a logical CPU's relationship
What: /sys/devices/system/cpu/cpuidle/current_driver
/sys/devices/system/cpu/cpuidle/current_governer_ro
+ /sys/devices/system/cpu/cpuidle/available_governors
+ /sys/devices/system/cpu/cpuidle/current_governor
Date: September 2007
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Discover cpuidle policy and mechanism
@@ -119,13 +121,84 @@ Description: Discover cpuidle policy and mechanism
Idle policy (governor) is differentiated from idle mechanism
(driver)
- current_driver: displays current idle mechanism
+ current_driver: (RO) displays current idle mechanism
- current_governor_ro: displays current idle policy
+ current_governor_ro: (RO) displays current idle policy
+
+ With the cpuidle_sysfs_switch boot option enabled (meant for
+ developer testing), the following three attributes are visible
+ instead:
+
+ current_driver: same as described above
+
+ available_governors: (RO) displays a space separated list of
+ available governors
+
+ current_governor: (RW) displays current idle policy. Users can
+ switch the governor at runtime by writing to this file.
See files in Documentation/cpuidle/ for more information.
+What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/name
+ /sys/devices/system/cpu/cpuX/cpuidle/stateN/latency
+ /sys/devices/system/cpu/cpuX/cpuidle/stateN/power
+ /sys/devices/system/cpu/cpuX/cpuidle/stateN/time
+ /sys/devices/system/cpu/cpuX/cpuidle/stateN/usage
+Date: September 2007
+KernelVersion: v2.6.24
+Contact: Linux power management list <linux-pm@vger.kernel.org>
+Description:
+ The directory /sys/devices/system/cpu/cpuX/cpuidle contains per
+ logical CPU specific cpuidle information for each online cpu X.
+ The processor idle states which are available for use have the
+ following attributes:
+
+ name: (RO) Name of the idle state (string).
+
+ latency: (RO) The latency to exit out of this idle state (in
+ microseconds).
+
+ power: (RO) The power consumed while in this idle state (in
+ milliwatts).
+
+ time: (RO) The total time spent in this idle state (in microseconds).
+
+ usage: (RO) Number of times this state was entered (a count).
+
+
+What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/desc
+Date: February 2008
+KernelVersion: v2.6.25
+Contact: Linux power management list <linux-pm@vger.kernel.org>
+Description:
+ (RO) A small description about the idle state (string).
+
+
+What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/disable
+Date: March 2012
+KernelVersion: v3.10
+Contact: Linux power management list <linux-pm@vger.kernel.org>
+Description:
+ (RW) Option to disable this idle state (bool). The behavior and
+ the effect of the disable variable depends on the implementation
+ of a particular governor. In the ladder governor, for example,
+ it is not coherent, i.e. if one is disabling a light state, then
+ all deeper states are disabled as well, but the disable variable
+ does not reflect it. Likewise, if one enables a deep state but a
+ lighter state still is disabled, then this has no effect.
+
+
+What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/residency
+Date: March 2014
+KernelVersion: v3.15
+Contact: Linux power management list <linux-pm@vger.kernel.org>
+Description:
+ (RO) Display the target residency i.e. the minimum amount of
+ time (in microseconds) this cpu should spend in this idle state
+ to make the transition worth the effort.
+
+
What: /sys/devices/system/cpu/cpu#/cpufreq/*
Date: pre-git history
Contact: linux-pm@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf
new file mode 100644
index 000000000000..325dc0667dbb
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-dptf
@@ -0,0 +1,40 @@
+What: /sys/bus/platform/devices/INT3407:00/dptf_power/charger_type
+Date: Jul, 2016
+KernelVersion: v4.10
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RO) The charger type - Traditional, Hybrid or NVDC.
+
+What: /sys/bus/platform/devices/INT3407:00/dptf_power/adapter_rating_mw
+Date: Jul, 2016
+KernelVersion: v4.10
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RO) Adapter rating in milliwatts (the maximum Adapter power).
+ Must be 0 if no AC Adaptor is plugged in.
+
+What: /sys/bus/platform/devices/INT3407:00/dptf_power/max_platform_power_mw
+Date: Jul, 2016
+KernelVersion: v4.10
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RO) Maximum platform power that can be supported by the battery
+ in milliwatts.
+
+What: /sys/bus/platform/devices/INT3407:00/dptf_power/platform_power_source
+Date: Jul, 2016
+KernelVersion: v4.10
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RO) Display the platform power source
+ 0x00 = DC
+ 0x01 = AC
+ 0x02 = USB
+ 0x03 = Wireless Charger
+
+What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power
+Date: Jul, 2016
+KernelVersion: v4.10
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RO) The maximum sustained power for battery in milliwatts.
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index 611a75e4366e..badb26ac33dc 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -570,7 +570,9 @@ your driver if they're helpful, or just use plain hex constants.
The device IDs are arbitrary hex numbers (vendor controlled) and normally used
only in a single location, the pci_device_id table.
-Please DO submit new vendor/device IDs to http://pciids.sourceforge.net/.
+Please DO submit new vendor/device IDs to http://pci-ids.ucw.cz/.
+There are mirrors of the pci.ids file at http://pciids.sourceforge.net/
+and https://github.com/pciutils/pciids.
diff --git a/Documentation/accelerators/ocxl.rst b/Documentation/accelerators/ocxl.rst
index 4f7af841d935..ddcc58d01cfb 100644
--- a/Documentation/accelerators/ocxl.rst
+++ b/Documentation/accelerators/ocxl.rst
@@ -152,6 +152,11 @@ OCXL_IOCTL_IRQ_SET_FD:
Associate an event fd to an AFU interrupt so that the user process
can be notified when the AFU sends an interrupt.
+OCXL_IOCTL_GET_METADATA:
+
+ Obtains configuration information from the card, such at the size of
+ MMIO areas, the AFU version, and the PASID for the current context.
+
mmap
----
diff --git a/Documentation/atomic_bitops.txt b/Documentation/atomic_bitops.txt
index 5550bfdcce5f..be70b32c95d9 100644
--- a/Documentation/atomic_bitops.txt
+++ b/Documentation/atomic_bitops.txt
@@ -58,7 +58,12 @@ Like with atomic_t, the rule of thumb is:
- RMW operations that have a return value are fully ordered.
-Except for test_and_set_bit_lock() which has ACQUIRE semantics and
+ - RMW operations that are conditional are unordered on FAILURE,
+ otherwise the above rules apply. In the case of test_and_{}_bit() operations,
+ if the bit in memory is unchanged by the operation then it is deemed to have
+ failed.
+
+Except for a successful test_and_set_bit_lock() which has ACQUIRE semantics and
clear_bit_unlock() which has RELEASE semantics.
Since a platform only has a single means of achieving atomic operations
diff --git a/Documentation/devicetree/bindings/misc/arm-charlcd.txt b/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
index e28e2aac47f1..e28e2aac47f1 100644
--- a/Documentation/devicetree/bindings/misc/arm-charlcd.txt
+++ b/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
new file mode 100644
index 000000000000..4f0ab3ed3b6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -0,0 +1,58 @@
+Renesas R-Car LVDS Encoder
+==========================
+
+These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
+Gen2, R-Car Gen3 and RZ/G SoCs.
+
+Required properties:
+
+- compatible : Shall contain one of
+ - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
+ - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
+ - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
+ - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
+ - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
+ - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
+ - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders
+ - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders
+
+- reg: Base address and length for the memory-mapped registers
+- clocks: A phandle + clock-specifier pair for the functional clock
+- resets: A phandle + reset specifier for the module reset
+
+Required nodes:
+
+The LVDS encoder has two video ports. Their connections are modelled using the
+OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 corresponds to the parallel RGB input
+- Video port 1 corresponds to the LVDS output
+
+Each port shall have a single endpoint.
+
+
+Example:
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7790-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ resets = <&cpg 726>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
index fc53f7c60bc6..207e42e9eba0 100644
--- a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
+++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
@@ -10,6 +10,7 @@ Optional properties:
- analog: the connector has DVI analog pins
- digital: the connector has DVI digital pins
- dual-link: the connector has pins for DVI dual-link
+- hpd-gpios: HPD GPIO number
Required nodes:
- Video port for DVI input
diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
index 05176f1ae108..8def11b16a24 100644
--- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
+++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
@@ -1,23 +1,3 @@
-Etnaviv DRM master device
-=========================
-
-The Etnaviv DRM master device is a virtual device needed to list all
-Vivante GPU cores that comprise the GPU subsystem.
-
-Required properties:
-- compatible: Should be one of
- "fsl,imx-gpu-subsystem"
- "marvell,dove-gpu-subsystem"
-- cores: Should contain a list of phandles pointing to Vivante GPU devices
-
-example:
-
-gpu-subsystem {
- compatible = "fsl,imx-gpu-subsystem";
- cores = <&gpu_2d>, <&gpu_3d>;
-};
-
-
Vivante GPU core devices
========================
@@ -32,7 +12,9 @@ Required properties:
- clocks: should contain one clock for entry in clock-names
see Documentation/devicetree/bindings/clock/clock-bindings.txt
- clock-names:
- - "bus": AXI/register clock
+ - "bus": AXI/master interface clock
+ - "reg": AHB/slave interface clock
+ (only required if GPU can gate slave interface independently)
- "core": GPU core clock
- "shader": Shader clock (only required if GPU has feature PIPE_3D)
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
index 6394ea9e3b9e..58b12e25bbb1 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
@@ -16,6 +16,7 @@ Required properties:
- ddc: phandle to the hdmi ddc node
- phy: phandle to the hdmi phy node
- samsung,syscon-phandle: phandle for system controller node for PMU.
+- #sound-dai-cells: should be 0.
Required properties for Exynos 4210, 4212, 5420 and 5433:
- clocks: list of clock IDs from SoC clock driver.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index a6671bd2c85a..518e9cdf0d4b 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -7,8 +7,6 @@ Required properties:
- reg: Physical base address and length of the registers of controller
- reg-names: The names of register regions. The following regions are required:
* "dsi_ctrl"
-- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
- be 0 or 1, since we have 2 DSI controllers at most for now.
- interrupts: The interrupt signal from the DSI block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks.
@@ -22,6 +20,8 @@ Required properties:
* "core"
For DSIv2, we need an additional clock:
* "src"
+ For DSI6G v2.0 onwards, we need also need the clock:
+ * "byte_intf"
- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
by a DSI PHY block. See [1] for details on clock bindings.
@@ -88,21 +88,35 @@ Required properties:
* "qcom,dsi-phy-28nm-lp"
* "qcom,dsi-phy-20nm"
* "qcom,dsi-phy-28nm-8960"
-- reg: Physical base address and length of the registers of PLL, PHY and PHY
- regulator
+ * "qcom,dsi-phy-14nm"
+ * "qcom,dsi-phy-10nm"
+- reg: Physical base address and length of the registers of PLL, PHY. Some
+ revisions require the PHY regulator base address, whereas others require the
+ PHY lane base address. See below for each PHY revision.
- reg-names: The names of register regions. The following regions are required:
+ For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
* "dsi_pll"
* "dsi_phy"
* "dsi_phy_regulator"
+ For DSI 14nm and 10nm PHYs:
+ * "dsi_pll"
+ * "dsi_phy"
+ * "dsi_phy_lane"
- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
2 clocks: A byte clock (index 0), and a pixel clock (index 1).
-- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
- be 0 or 1, since we have 2 DSI PHYs at most for now.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks. See [1] for details on clock bindings.
- clock-names: the following clocks are required:
* "iface"
+ For 28nm HPM/LP, 28nm 8960 PHYs:
+- vddio-supply: phandle to vdd-io regulator device node
+ For 20nm PHY:
- vddio-supply: phandle to vdd-io regulator device node
+- vcca-supply: phandle to vcca regulator device node
+ For 14nm PHY:
+- vcca-supply: phandle to vcca regulator device node
+ For 10nm PHY:
+- vdds-supply: phandle to vdds regulator device node
Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt b/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt
new file mode 100644
index 000000000000..85626edf63e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,g104sn02.txt
@@ -0,0 +1,12 @@
+AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g104sn02"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt
index 58fa3e48481d..78222ced1874 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timing.txt
+++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt
@@ -80,6 +80,11 @@ The parameters are defined as:
| | v | | |
+----------+-------------------------------------+----------+-------+
+Note: In addition to being used as subnode(s) of display-timings, the timing
+ subnode may also be used on its own. This is appropriate if only one mode
+ need be conveyed. In this case, the node should be named 'panel-timing'.
+
+
Example:
display-timings {
diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
new file mode 100644
index 000000000000..6a036ede3e28
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/koe,tx31d200vm0baa.txt
@@ -0,0 +1,25 @@
+Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "koe,tx31d200vm0baa"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LVDS panel input.
+
+Example:
+ panel {
+ compatible = "koe,tx31d200vm0baa";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
index 6862028e7b2e..203b03eefb68 100644
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
@@ -9,6 +9,7 @@ Required properties:
Optional properties:
- reset-gpios: a GPIO spec for the reset pin (active low).
+ - power-supply: phandle of the regulator that provides the supply voltage.
Example:
&dsi {
@@ -17,5 +18,6 @@ Example:
compatible = "orisetech,otm8009a";
reg = <0>;
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+ power-supply = <&v1v8>;
};
};
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
new file mode 100644
index 000000000000..cbb79ef3bfc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
@@ -0,0 +1,25 @@
+Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
+
+The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+panel connected using a MIPI-DSI video interface.
+
+Required properties:
+ - compatible: "raydium,rm68200"
+ - reg: the virtual channel number of a DSI peripheral
+
+Optional properties:
+ - reset-gpios: a GPIO spec for the reset pin (active low).
+ - power-supply: phandle of the regulator that provides the supply voltage.
+ - backlight: phandle of the backlight device attached to the panel.
+
+Example:
+&dsi {
+ ...
+ panel@0 {
+ compatible = "raydium,rm68200";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+ power-supply = <&v1v8>;
+ backlight = <&pwm_backlight>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
index 16d8ff088b7d..45a457ad38f0 100644
--- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
+++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
@@ -1,4 +1,8 @@
Simple display panel
+====================
+
+panel node
+----------
Required properties:
- power-supply: See panel-common.txt
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index cd48aba3bc8c..c9cd17f99702 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -13,13 +13,10 @@ Required Properties:
- "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
- "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
- "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
+ - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
+ - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU
- - reg: A list of base address and length of each memory resource, one for
- each entry in the reg-names property.
- - reg-names: Name of the memory resources. The DU requires one memory
- resource for the DU core (named "du") and one memory resource for each
- LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
- index).
+ - reg: the memory-mapped I/O registers base address and length
- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifiers for the DU interrupts.
@@ -29,14 +26,13 @@ Required Properties:
- clock-names: Name of the clocks. This property is model-dependent.
- R8A7779 uses a single functional clock. The clock doesn't need to be
named.
- - All other DU instances use one functional clock per channel and one
- clock per LVDS encoder (if available). The functional clocks must be
- named "du.x" with "x" being the channel numerical index. The LVDS clocks
- must be named "lvds.x" with "x" being the LVDS encoder numerical index.
- - In addition to the functional and encoder clocks, all DU versions also
- support externally supplied pixel clocks. Those clocks are optional.
- When supplied they must be named "dclkin.x" with "x" being the input
- clock numerical index.
+ - All other DU instances use one functional clock per channel The
+ functional clocks must be named "du.x" with "x" being the channel
+ numerical index.
+ - In addition to the functional clocks, all DU versions also support
+ externally supplied pixel clocks. Those clocks are optional. When
+ supplied they must be named "dclkin.x" with "x" being the input clock
+ numerical index.
- vsps: A list of phandle and channel index tuples to the VSPs that handle
the memory interfaces for the DU channels. The phandle identifies the VSP
@@ -63,15 +59,15 @@ corresponding to each DU output.
R8A7794 (R-Car E2) DPAD 0 DPAD 1 - -
R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0
R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 -
+ R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - -
+ R8A77995 (R-Car D3) DPAD 0 LVDS 0 LVDS 1 -
Example: R8A7795 (R-Car H3) ES2.0 DU
du: display@feb00000 {
compatible = "renesas,du-r8a7795";
- reg = <0 0xfeb00000 0 0x80000>,
- <0 0xfeb90000 0 0x14>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x80000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
@@ -79,9 +75,8 @@ Example: R8A7795 (R-Car H3) ES2.0 DU
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+ <&cpg CPG_MOD 721>;
+ clock-names = "du.0", "du.1", "du.2", "du.3";
vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
ports {
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index b995bfee734a..3346c1e2a7a0 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -102,6 +102,7 @@ DWC HDMI PHY
Required properties:
- compatible: value must be one of:
* allwinner,sun8i-a83t-hdmi-phy
+ * allwinner,sun8i-h3-hdmi-phy
- reg: base address and size of memory-mapped region
- clocks: phandles to the clocks feeding the HDMI PHY
* bus: the HDMI PHY interface clock
@@ -110,6 +111,9 @@ Required properties:
- resets: phandle to the reset controller driving the PHY
- reset-names: must be "phy"
+H3 HDMI PHY requires additional clock:
+ - pll-0: parent of phy clock
+
TV Encoder
----------
@@ -142,13 +146,16 @@ Required properties:
* allwinner,sun8i-a83t-tcon-lcd
* allwinner,sun8i-a83t-tcon-tv
* allwinner,sun8i-v3s-tcon
+ * allwinner,sun9i-a80-tcon-lcd
+ * allwinner,sun9i-a80-tcon-tv
- reg: base address and size of memory-mapped region
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the TCON.
- 'ahb': the interface clocks
- - 'tcon-ch0': The clock driving the TCON channel 0, except for A83T TV TCON
+ - 'tcon-ch0': The clock driving the TCON channel 0, if supported
- resets: phandles to the reset controllers driving the encoder
- - "lcd": the reset line for the TCON channel 0
+ - "lcd": the reset line for the TCON
+ - "edp": the reset line for the eDP block (A80 only)
- clock-names: the clock names mentioned above
- reset-names: the reset names mentioned above
@@ -167,7 +174,9 @@ Required properties:
channel the endpoint is associated to. If that property is not
present, the endpoint number will be used as the channel number.
-On SoCs other than the A33 and V3s, there is one more clock required:
+For TCONs with channel 0, there is one more clock required:
+ - 'tcon-ch0': The clock driving the TCON channel 0
+For TCONs with channel 1, there is one more clock required:
- 'tcon-ch1': The clock driving the TCON channel 1
When TCON support LVDS (all TCONs except TV TCON on A83T and those found
@@ -182,7 +191,7 @@ DRC
---
The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs
-(A31, A23, A33), allows to dynamically adjust pixel
+(A31, A23, A33, A80), allows to dynamically adjust pixel
brightness/contrast based on histogram measurements for LCD content
adaptive backlight control.
@@ -192,6 +201,7 @@ Required properties:
* allwinner,sun6i-a31-drc
* allwinner,sun6i-a31s-drc
* allwinner,sun8i-a33-drc
+ * allwinner,sun9i-a80-drc
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the DRC
@@ -218,6 +228,7 @@ Required properties:
* allwinner,sun6i-a31-display-backend
* allwinner,sun7i-a20-display-backend
* allwinner,sun8i-a33-display-backend
+ * allwinner,sun9i-a80-display-backend
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the frontend and backend
@@ -239,6 +250,28 @@ On the A33, some additional properties are required:
- resets and reset-names need to have a phandle to the SAT bus
resets, whose name will be "sat"
+DEU
+---
+
+The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
+can sharpen the display content in both luma and chroma channels.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun9i-a80-deu
+ - reg: base address and size of the memory-mapped region.
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the DEU
+ * ahb: the DEU interface clock
+ * mod: the DEU module clock
+ * ram: the DEU DRAM clock
+ - clock-names: the clock names mentioned above
+ - resets: phandles to the reset line driving the DEU
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoints, the second one the outputs
+
Display Engine Frontend
-----------------------
@@ -252,6 +285,7 @@ Required properties:
* allwinner,sun6i-a31-display-frontend
* allwinner,sun7i-a20-display-frontend
* allwinner,sun8i-a33-display-frontend
+ * allwinner,sun9i-a80-display-frontend
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the frontend and backend
@@ -275,6 +309,7 @@ Required properties:
- compatible: value must be one of:
* allwinner,sun8i-a83t-de2-mixer-0
* allwinner,sun8i-a83t-de2-mixer-1
+ * allwinner,sun8i-h3-de2-mixer-0
* allwinner,sun8i-v3s-de2-mixer
- reg: base address and size of the memory-mapped region.
- clocks: phandles to the clocks feeding the mixer
@@ -305,7 +340,9 @@ Required properties:
* allwinner,sun7i-a20-display-engine
* allwinner,sun8i-a33-display-engine
* allwinner,sun8i-a83t-display-engine
+ * allwinner,sun8i-h3-display-engine
* allwinner,sun8i-v3s-display-engine
+ * allwinner,sun9i-a80-display-engine
- allwinner,pipelines: list of phandle to the display engine
frontends (DE 1.0) or mixers (DE 2.0) available.
diff --git a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
index 217a90eaabe7..9c38bbe7e6d7 100644
--- a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
+++ b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
@@ -11,7 +11,11 @@ Required properties:
interrupts.
Optional properties:
-- clocks: Optional reference to the clock used by the XOR engine.
+- clocks: Optional reference to the clocks used by the XOR engine.
+- clock-names: mandatory if there is a second clock, in this case the
+ name must be "core" for the first clock and "reg" for the second
+ one
+
Example:
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
index 1812c848e369..abfae1beca2b 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ b/Documentation/devicetree/bindings/eeprom/at24.txt
@@ -38,9 +38,9 @@ Required properties:
"catalyst",
"microchip",
+ "nxp",
"ramtron",
"renesas",
- "nxp",
"st",
Some vendors use different model names for chips which are just
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
index e9ebb8a20e0d..ba24ca7ba95e 100644
--- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
@@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator
Required properties:
- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
as a generic SD modulator if modulator not specified in compatible list.
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers".
Example node:
ads1202: adc@0 {
compatible = "sd-modulator";
- #io-channel-cells = <1>;
+ #io-channel-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
index 33c9a10fdc91..20f121daa910 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
@@ -14,6 +14,7 @@ Required properties:
- "renesas,irqc-r8a7794" (R-Car E2)
- "renesas,intc-ex-r8a7795" (R-Car H3)
- "renesas,intc-ex-r8a7796" (R-Car M3-W)
+ - "renesas,intc-ex-r8a77965" (R-Car M3-N)
- "renesas,intc-ex-r8a77970" (R-Car V3M)
- "renesas,intc-ex-r8a77995" (R-Car D3)
- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 1d4d0f49c9d0..8c033d48e2ba 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -50,14 +50,15 @@ Example:
compatible = "marvell,mv88e6085";
reg = <0>;
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
- };
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy0: switch1phy0@0 {
- reg = <0>;
- interrupt-parent = <&switch0>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch1phy0: switch1phy0@0 {
+ reg = <0>;
+ interrupt-parent = <&switch0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
};
};
@@ -74,23 +75,24 @@ Example:
compatible = "marvell,mv88e6390";
reg = <0>;
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
- };
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy0: switch1phy0@0 {
- reg = <0>;
- interrupt-parent = <&switch0>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch1phy0: switch1phy0@0 {
+ reg = <0>;
+ interrupt-parent = <&switch0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- };
- mdio1 {
- compatible = "marvell,mv88e6xxx-mdio-external";
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy9: switch1phy0@9 {
- reg = <9>;
+ mdio1 {
+ compatible = "marvell,mv88e6xxx-mdio-external";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch1phy9: switch1phy0@9 {
+ reg = <9>;
+ };
};
};
};
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index c902261893b9..b4dc455eb155 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -18,6 +18,7 @@ Required properties:
- "renesas,etheravb-r8a7795" for the R8A7795 SoC.
- "renesas,etheravb-r8a7796" for the R8A7796 SoC.
- "renesas,etheravb-r8a77970" for the R8A77970 SoC.
+ - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
- "renesas,etheravb-r8a77995" for the R8A77995 SoC.
- "renesas,etheravb-rcar-gen3" as a fallback for the above
R-Car Gen3 devices.
@@ -26,7 +27,11 @@ Required properties:
SoC-specific version corresponding to the platform first followed by
the generic version.
-- reg: offset and length of (1) the register block and (2) the stream buffer.
+- reg: Offset and length of (1) the register block and (2) the stream buffer.
+ The region for the register block is mandatory.
+ The region for the stream buffer is optional, as it is only present on
+ R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796),
+ and M3-N (R8A77965).
- interrupts: A list of interrupt-specifiers, one for each entry in
interrupt-names.
If interrupt-names is not present, an interrupt specifier
diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
new file mode 100644
index 000000000000..c6b82511ae8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
@@ -0,0 +1,8 @@
+Binding for MIPS Cluster Power Controller (CPC).
+
+This binding allows a system to specify where the CPC registers are
+located.
+
+Required properties:
+compatible : Should be "mti,mips-cpc".
+regs: Should describe the address & size of the CPC register region.
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
index 3c81f78b5c27..5d254ab13ebf 100644
--- a/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -60,7 +60,7 @@ Examples
#size-cells = <0>;
button@1 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <116>;
label = "POWER";
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
index 28be51afdb6a..379eb763073e 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
@@ -22,7 +22,32 @@ Optional properties:
- clocks : thermal sensor's clock source.
Example:
+ocotp: ocotp@21bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6sx-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SX_CLK_OCOTP>;
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
+};
+
+tempmon: tempmon {
+ compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+};
+
+Legacy method (Deprecated):
tempmon {
compatible = "fsl,imx6q-tempmon";
fsl,tempmon = <&anatop>;
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index e64d903bcbe8..46da5f184460 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -19,7 +19,7 @@ Required properties:
configured in FS mode;
- "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
configured in HS mode;
- - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs
+ - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs
configured in HS mode;
- reg : Should contain 1 register range (address and length)
- interrupts : Should contain 1 interrupt
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index 87a45e2f9b7f..2c071bb5801e 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Must contain one of the following:
- "renesas,r8a7795-usb3-peri"
- "renesas,r8a7796-usb3-peri"
+ - "renesas,r8a77965-usb3-peri"
- "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible
device
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index d060172f1529..43960faf5a88 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -12,6 +12,7 @@ Required properties:
- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
+ - "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device
- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index e2ea59bbca93..1651483a7048 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -13,6 +13,7 @@ Required properties:
- "renesas,xhci-r8a7793" for r8a7793 SoC
- "renesas,xhci-r8a7795" for r8a7795 SoC
- "renesas,xhci-r8a7796" for r8a7796 SoC
+ - "renesas,xhci-r8a77965" for r8a77965 SoC
- "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
device
- "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ae850d6c0ad3..12e8b3e576b0 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -104,6 +104,7 @@ eeti eGalax_eMPIA Technology Inc
elan Elan Microelectronic Corp.
embest Shenzhen Embest Technology Co., Ltd.
emmicro EM Microelectronic
+emtrion emtrion GmbH
energymicro Silicon Laboratories (formerly Energy Micro AS)
engicam Engicam S.r.l.
epcos EPCOS AG
diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt
index c4aa0adf13ec..5175a24d387e 100644
--- a/Documentation/devicetree/overlay-notes.txt
+++ b/Documentation/devicetree/overlay-notes.txt
@@ -87,8 +87,8 @@ Overlay in-kernel API
The API is quite easy to use.
-1. Call of_overlay_apply() to create and apply an overlay changeset. The return
-value is an error or a cookie identifying this overlay.
+1. Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
+return value is an error or a cookie identifying this overlay.
2. Call of_overlay_remove() to remove and cleanup the overlay changeset
previously created via the call to of_overlay_apply(). Removal of an overlay
diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
new file mode 100644
index 000000000000..2c815a7f1ba7
--- /dev/null
+++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt
@@ -0,0 +1,62 @@
+#
+# Feature name: membarrier-sync-core
+# Kconfig: ARCH_HAS_MEMBARRIER_SYNC_CORE
+# description: arch supports core serializing membarrier
+#
+# Architecture requirements
+#
+# * arm64
+#
+# Rely on eret context synchronization when returning from IPI handler, and
+# when returning to user-space.
+#
+# * x86
+#
+# x86-32 uses IRET as return from interrupt, which takes care of the IPI.
+# However, it uses both IRET and SYSEXIT to go back to user-space. The IRET
+# instruction is core serializing, but not SYSEXIT.
+#
+# x86-64 uses IRET as return from interrupt, which takes care of the IPI.
+# However, it can return to user-space through either SYSRETL (compat code),
+# SYSRETQ, or IRET.
+#
+# Given that neither SYSRET{L,Q}, nor SYSEXIT, are core serializing, we rely
+# instead on write_cr3() performed by switch_mm() to provide core serialization
+# after changing the current mm, and deal with the special case of kthread ->
+# uthread (temporarily keeping current mm into active_mm) by issuing a
+# sync_core_before_usermode() in that specific case.
+#
+ -----------------------
+ | arch |status|
+ -----------------------
+ | alpha: | TODO |
+ | arc: | TODO |
+ | arm: | TODO |
+ | arm64: | ok |
+ | blackfin: | TODO |
+ | c6x: | TODO |
+ | cris: | TODO |
+ | frv: | TODO |
+ | h8300: | TODO |
+ | hexagon: | TODO |
+ | ia64: | TODO |
+ | m32r: | TODO |
+ | m68k: | TODO |
+ | metag: | TODO |
+ | microblaze: | TODO |
+ | mips: | TODO |
+ | mn10300: | TODO |
+ | nios2: | TODO |
+ | openrisc: | TODO |
+ | parisc: | TODO |
+ | powerpc: | TODO |
+ | s390: | TODO |
+ | score: | TODO |
+ | sh: | TODO |
+ | sparc: | TODO |
+ | tile: | TODO |
+ | um: | TODO |
+ | unicore32: | TODO |
+ | x86: | ok |
+ | xtensa: | TODO |
+ -----------------------
diff --git a/Documentation/gpu/drivers.rst b/Documentation/gpu/drivers.rst
new file mode 100644
index 000000000000..e8c84419a2a1
--- /dev/null
+++ b/Documentation/gpu/drivers.rst
@@ -0,0 +1,21 @@
+========================
+GPU Driver Documentation
+========================
+
+.. toctree::
+
+ i915
+ meson
+ pl111
+ tegra
+ tinydrm
+ tve200
+ vc4
+ bridge/dw-hdmi
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index 56a3780e39b8..1dffd1ac4cd4 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -286,6 +286,9 @@ Atomic Mode Setting Function Reference
.. kernel-doc:: drivers/gpu/drm/drm_atomic.c
:export:
+.. kernel-doc:: drivers/gpu/drm/drm_atomic.c
+ :internal:
+
CRTC Abstraction
================
diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst
index c36586dad29d..00288f34c5a6 100644
--- a/Documentation/gpu/index.rst
+++ b/Documentation/gpu/index.rst
@@ -10,16 +10,9 @@ Linux GPU Driver Developer's Guide
drm-kms
drm-kms-helpers
drm-uapi
- i915
- meson
- pl111
- tegra
- tinydrm
- tve200
- vc4
+ drivers
vga-switcheroo
vgaarbiter
- bridge/dw-hdmi
todo
.. only:: subproject and html
diff --git a/Documentation/gpu/tve200.rst b/Documentation/gpu/tve200.rst
index 69b17b324e12..152ea9398f7e 100644
--- a/Documentation/gpu/tve200.rst
+++ b/Documentation/gpu/tve200.rst
@@ -3,4 +3,4 @@
==================================
.. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c
- :doc: Faraday TV Encoder 200
+ :doc: Faraday TV Encoder TVE200 DRM Driver
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index d47702456926..65514c251318 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -28,8 +28,10 @@ Supported adapters:
* Intel Wildcat Point (PCH)
* Intel Wildcat Point-LP (PCH)
* Intel BayTrail (SOC)
+ * Intel Braswell (SOC)
* Intel Sunrise Point-H (PCH)
* Intel Sunrise Point-LP (PCH)
+ * Intel Kaby Lake-H (PCH)
* Intel DNV (SOC)
* Intel Broxton (SOC)
* Intel Lewisburg (PCH)
diff --git a/Documentation/ia64/serial.txt b/Documentation/ia64/serial.txt
index 6869c73de4e2..a63d2c54329b 100644
--- a/Documentation/ia64/serial.txt
+++ b/Documentation/ia64/serial.txt
@@ -111,7 +111,7 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
- If you don't have an HCDP, the kernel doesn't know where
your console lives until the driver discovers serial
- devices. Use "console=uart, io,0x3f8" (or appropriate
+ devices. Use "console=uart,io,0x3f8" (or appropriate
address for your machine).
Kernel and init script output works fine, but no "login:" prompt:
diff --git a/Documentation/locking/mutex-design.txt b/Documentation/locking/mutex-design.txt
index 60c482df1a38..818aca19612f 100644
--- a/Documentation/locking/mutex-design.txt
+++ b/Documentation/locking/mutex-design.txt
@@ -21,37 +21,23 @@ Implementation
--------------
Mutexes are represented by 'struct mutex', defined in include/linux/mutex.h
-and implemented in kernel/locking/mutex.c. These locks use a three
-state atomic counter (->count) to represent the different possible
-transitions that can occur during the lifetime of a lock:
-
- 1: unlocked
- 0: locked, no waiters
- negative: locked, with potential waiters
-
-In its most basic form it also includes a wait-queue and a spinlock
-that serializes access to it. CONFIG_SMP systems can also include
-a pointer to the lock task owner (->owner) as well as a spinner MCS
-lock (->osq), both described below in (ii).
+and implemented in kernel/locking/mutex.c. These locks use an atomic variable
+(->owner) to keep track of the lock state during its lifetime. Field owner
+actually contains 'struct task_struct *' to the current lock owner and it is
+therefore NULL if not currently owned. Since task_struct pointers are aligned
+at at least L1_CACHE_BYTES, low bits (3) are used to store extra state (e.g.,
+if waiter list is non-empty). In its most basic form it also includes a
+wait-queue and a spinlock that serializes access to it. Furthermore,
+CONFIG_MUTEX_SPIN_ON_OWNER=y systems use a spinner MCS lock (->osq), described
+below in (ii).
When acquiring a mutex, there are three possible paths that can be
taken, depending on the state of the lock:
-(i) fastpath: tries to atomically acquire the lock by decrementing the
- counter. If it was already taken by another task it goes to the next
- possible path. This logic is architecture specific. On x86-64, the
- locking fastpath is 2 instructions:
-
- 0000000000000e10 <mutex_lock>:
- e21: f0 ff 0b lock decl (%rbx)
- e24: 79 08 jns e2e <mutex_lock+0x1e>
-
- the unlocking fastpath is equally tight:
-
- 0000000000000bc0 <mutex_unlock>:
- bc8: f0 ff 07 lock incl (%rdi)
- bcb: 7f 0a jg bd7 <mutex_unlock+0x17>
-
+(i) fastpath: tries to atomically acquire the lock by cmpxchg()ing the owner with
+ the current task. This only works in the uncontended case (cmpxchg() checks
+ against 0UL, so all 3 state bits above have to be 0). If the lock is
+ contended it goes to the next possible path.
(ii) midpath: aka optimistic spinning, tries to spin for acquisition
while the lock owner is running and there are no other tasks ready
@@ -143,11 +129,10 @@ Test if the mutex is taken:
Disadvantages
-------------
-Unlike its original design and purpose, 'struct mutex' is larger than
-most locks in the kernel. E.g: on x86-64 it is 40 bytes, almost twice
-as large as 'struct semaphore' (24 bytes) and tied, along with rwsems,
-for the largest lock in the kernel. Larger structure sizes mean more
-CPU cache and memory footprint.
+Unlike its original design and purpose, 'struct mutex' is among the largest
+locks in the kernel. E.g: on x86-64 it is 32 bytes, where 'struct semaphore'
+is 24 bytes and rw_semaphore is 40 bytes. Larger structure sizes mean more CPU
+cache and memory footprint.
When to use mutexes
-------------------
diff --git a/Documentation/media/dmx.h.rst.exceptions b/Documentation/media/dmx.h.rst.exceptions
index 63f55a9ae2b1..a8c4239ed95b 100644
--- a/Documentation/media/dmx.h.rst.exceptions
+++ b/Documentation/media/dmx.h.rst.exceptions
@@ -50,9 +50,15 @@ replace typedef dmx_filter_t :c:type:`dmx_filter`
replace typedef dmx_pes_type_t :c:type:`dmx_pes_type`
replace typedef dmx_input_t :c:type:`dmx_input`
-ignore symbol DMX_OUT_DECODER
-ignore symbol DMX_OUT_TAP
-ignore symbol DMX_OUT_TS_TAP
-ignore symbol DMX_OUT_TSDEMUX_TAP
+replace symbol DMX_BUFFER_FLAG_HAD_CRC32_DISCARD :c:type:`dmx_buffer_flags`
+replace symbol DMX_BUFFER_FLAG_TEI :c:type:`dmx_buffer_flags`
+replace symbol DMX_BUFFER_PKT_COUNTER_MISMATCH :c:type:`dmx_buffer_flags`
+replace symbol DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED :c:type:`dmx_buffer_flags`
+replace symbol DMX_BUFFER_FLAG_DISCONTINUITY_INDICATOR :c:type:`dmx_buffer_flags`
+
+replace symbol DMX_OUT_DECODER :c:type:`dmx_output`
+replace symbol DMX_OUT_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TS_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TSDEMUX_TAP :c:type:`dmx_output`
replace ioctl DMX_DQBUF dmx_qbuf
diff --git a/Documentation/media/uapi/dvb/dmx-qbuf.rst b/Documentation/media/uapi/dvb/dmx-qbuf.rst
index b48c4931658e..be5a4c6f1904 100644
--- a/Documentation/media/uapi/dvb/dmx-qbuf.rst
+++ b/Documentation/media/uapi/dvb/dmx-qbuf.rst
@@ -51,9 +51,10 @@ out to disk. Buffers remain locked until dequeued, until the
the device is closed.
Applications call the ``DMX_DQBUF`` ioctl to dequeue a filled
-(capturing) buffer from the driver's outgoing queue. They just set the ``reserved`` field array to zero. When ``DMX_DQBUF`` is called with a
-pointer to this structure, the driver fills the remaining fields or
-returns an error code.
+(capturing) buffer from the driver's outgoing queue.
+They just set the ``index`` field withe the buffer ID to be queued.
+When ``DMX_DQBUF`` is called with a pointer to struct :c:type:`dmx_buffer`,
+the driver fills the remaining fields or returns an error code.
By default ``DMX_DQBUF`` blocks when no buffer is in the outgoing
queue. When the ``O_NONBLOCK`` flag was given to the
diff --git a/Documentation/networking/segmentation-offloads.txt b/Documentation/networking/segmentation-offloads.txt
index 2f09455a993a..aca542ec125c 100644
--- a/Documentation/networking/segmentation-offloads.txt
+++ b/Documentation/networking/segmentation-offloads.txt
@@ -13,14 +13,15 @@ The following technologies are described:
* Generic Segmentation Offload - GSO
* Generic Receive Offload - GRO
* Partial Generic Segmentation Offload - GSO_PARTIAL
+ * SCTP accelleration with GSO - GSO_BY_FRAGS
TCP Segmentation Offload
========================
TCP segmentation allows a device to segment a single frame into multiple
frames with a data payload size specified in skb_shinfo()->gso_size.
-When TCP segmentation requested the bit for either SKB_GSO_TCP or
-SKB_GSO_TCP6 should be set in skb_shinfo()->gso_type and
+When TCP segmentation requested the bit for either SKB_GSO_TCPV4 or
+SKB_GSO_TCPV6 should be set in skb_shinfo()->gso_type and
skb_shinfo()->gso_size should be set to a non-zero value.
TCP segmentation is dependent on support for the use of partial checksum
@@ -49,6 +50,10 @@ datagram into multiple IPv4 fragments. Many of the requirements for UDP
fragmentation offload are the same as TSO. However the IPv4 ID for
fragments should not increment as a single IPv4 datagram is fragmented.
+UFO is deprecated: modern kernels will no longer generate UFO skbs, but can
+still receive them from tuntap and similar devices. Offload of UDP-based
+tunnel protocols is still supported.
+
IPIP, SIT, GRE, UDP Tunnel, and Remote Checksum Offloads
========================================================
@@ -83,10 +88,10 @@ SKB_GSO_UDP_TUNNEL_CSUM. These two additional tunnel types reflect the
fact that the outer header also requests to have a non-zero checksum
included in the outer header.
-Finally there is SKB_GSO_REMCSUM which indicates that a given tunnel header
-has requested a remote checksum offload. In this case the inner headers
-will be left with a partial checksum and only the outer header checksum
-will be computed.
+Finally there is SKB_GSO_TUNNEL_REMCSUM which indicates that a given tunnel
+header has requested a remote checksum offload. In this case the inner
+headers will be left with a partial checksum and only the outer header
+checksum will be computed.
Generic Segmentation Offload
============================
@@ -128,3 +133,38 @@ values for if the header was simply duplicated. The one exception to this
is the outer IPv4 ID field. It is up to the device drivers to guarantee
that the IPv4 ID field is incremented in the case that a given header does
not have the DF bit set.
+
+SCTP accelleration with GSO
+===========================
+
+SCTP - despite the lack of hardware support - can still take advantage of
+GSO to pass one large packet through the network stack, rather than
+multiple small packets.
+
+This requires a different approach to other offloads, as SCTP packets
+cannot be just segmented to (P)MTU. Rather, the chunks must be contained in
+IP segments, padding respected. So unlike regular GSO, SCTP can't just
+generate a big skb, set gso_size to the fragmentation point and deliver it
+to IP layer.
+
+Instead, the SCTP protocol layer builds an skb with the segments correctly
+padded and stored as chained skbs, and skb_segment() splits based on those.
+To signal this, gso_size is set to the special value GSO_BY_FRAGS.
+
+Therefore, any code in the core networking stack must be aware of the
+possibility that gso_size will be GSO_BY_FRAGS and handle that case
+appropriately.
+
+There are some helpers to make this easier:
+
+ - skb_is_gso(skb) && skb_is_gso_sctp(skb) is the best way to see if
+ an skb is an SCTP GSO skb.
+
+ - For size checks, the skb_gso_validate_*_len family of helpers correctly
+ considers GSO_BY_FRAGS.
+
+ - For manipulating packets, skb_increase_gso_size and skb_decrease_gso_size
+ will check for GSO_BY_FRAGS and WARN if asked to manipulate these skbs.
+
+This also affects drivers with the NETIF_F_FRAGLIST & NETIF_F_GSO_SCTP bits
+set. Note also that NETIF_F_GSO_SCTP is included in NETIF_F_GSO_SOFTWARE.
diff --git a/Documentation/sphinx/kerneldoc.py b/Documentation/sphinx/kerneldoc.py
index 39aa9e8697cc..fbedcc39460b 100644
--- a/Documentation/sphinx/kerneldoc.py
+++ b/Documentation/sphinx/kerneldoc.py
@@ -36,8 +36,7 @@ import glob
from docutils import nodes, statemachine
from docutils.statemachine import ViewList
-from docutils.parsers.rst import directives
-from sphinx.util.compat import Directive
+from docutils.parsers.rst import directives, Directive
from sphinx.ext.autodoc import AutodocReporter
__version__ = '1.0'
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 792fa8717d13..d6b3ff51a14f 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -123,14 +123,15 @@ memory layout to fit in user mode), check KVM_CAP_MIPS_VZ and use the
flag KVM_VM_MIPS_VZ.
-4.3 KVM_GET_MSR_INDEX_LIST
+4.3 KVM_GET_MSR_INDEX_LIST, KVM_GET_MSR_FEATURE_INDEX_LIST
-Capability: basic
+Capability: basic, KVM_CAP_GET_MSR_FEATURES for KVM_GET_MSR_FEATURE_INDEX_LIST
Architectures: x86
-Type: system
+Type: system ioctl
Parameters: struct kvm_msr_list (in/out)
Returns: 0 on success; -1 on error
Errors:
+ EFAULT: the msr index list cannot be read from or written to
E2BIG: the msr index list is to be to fit in the array specified by
the user.
@@ -139,16 +140,23 @@ struct kvm_msr_list {
__u32 indices[0];
};
-This ioctl returns the guest msrs that are supported. The list varies
-by kvm version and host processor, but does not change otherwise. The
-user fills in the size of the indices array in nmsrs, and in return
-kvm adjusts nmsrs to reflect the actual number of msrs and fills in
-the indices array with their numbers.
+The user fills in the size of the indices array in nmsrs, and in return
+kvm adjusts nmsrs to reflect the actual number of msrs and fills in the
+indices array with their numbers.
+
+KVM_GET_MSR_INDEX_LIST returns the guest msrs that are supported. The list
+varies by kvm version and host processor, but does not change otherwise.
Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
not returned in the MSR list, as different vcpus can have a different number
of banks, as set via the KVM_X86_SETUP_MCE ioctl.
+KVM_GET_MSR_FEATURE_INDEX_LIST returns the list of MSRs that can be passed
+to the KVM_GET_MSRS system ioctl. This lets userspace probe host capabilities
+and processor features that are exposed via MSRs (e.g., VMX capabilities).
+This list also varies by kvm version and host processor, but does not change
+otherwise.
+
4.4 KVM_CHECK_EXTENSION
@@ -475,14 +483,22 @@ Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead.
4.18 KVM_GET_MSRS
-Capability: basic
+Capability: basic (vcpu), KVM_CAP_GET_MSR_FEATURES (system)
Architectures: x86
-Type: vcpu ioctl
+Type: system ioctl, vcpu ioctl
Parameters: struct kvm_msrs (in/out)
-Returns: 0 on success, -1 on error
+Returns: number of msrs successfully returned;
+ -1 on error
+
+When used as a system ioctl:
+Reads the values of MSR-based features that are available for the VM. This
+is similar to KVM_GET_SUPPORTED_CPUID, but it returns MSR indices and values.
+The list of msr-based features can be obtained using KVM_GET_MSR_FEATURE_INDEX_LIST
+in a system ioctl.
+When used as a vcpu ioctl:
Reads model-specific registers from the vcpu. Supported msr indices can
-be obtained using KVM_GET_MSR_INDEX_LIST.
+be obtained using KVM_GET_MSR_INDEX_LIST in a system ioctl.
struct kvm_msrs {
__u32 nmsrs; /* number of msrs in entries */
diff --git a/Documentation/virtual/kvm/cpuid.txt b/Documentation/virtual/kvm/cpuid.txt
index dcab6dc11e3b..87a7506f31c2 100644
--- a/Documentation/virtual/kvm/cpuid.txt
+++ b/Documentation/virtual/kvm/cpuid.txt
@@ -58,6 +58,10 @@ KVM_FEATURE_PV_TLB_FLUSH || 9 || guest checks this feature bit
|| || before enabling paravirtualized
|| || tlb flush.
------------------------------------------------------------------------------
+KVM_FEATURE_ASYNC_PF_VMEXIT || 10 || paravirtualized async PF VM exit
+ || || can be enabled by setting bit 2
+ || || when writing to msr 0x4b564d02
+------------------------------------------------------------------------------
KVM_FEATURE_CLOCKSOURCE_STABLE_BIT || 24 || host will warn if no guest-side
|| || per-cpu warps are expected in
|| || kvmclock.
diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt
index 1ebecc115dc6..f3f0d57ced8e 100644
--- a/Documentation/virtual/kvm/msr.txt
+++ b/Documentation/virtual/kvm/msr.txt
@@ -170,7 +170,8 @@ MSR_KVM_ASYNC_PF_EN: 0x4b564d02
when asynchronous page faults are enabled on the vcpu 0 when
disabled. Bit 1 is 1 if asynchronous page faults can be injected
when vcpu is in cpl == 0. Bit 2 is 1 if asynchronous page faults
- are delivered to L1 as #PF vmexits.
+ are delivered to L1 as #PF vmexits. Bit 2 can be set only if
+ KVM_FEATURE_ASYNC_PF_VMEXIT is present in CPUID.
First 4 byte of 64 byte memory location will be written to by
the hypervisor at the time of asynchronous page fault (APF)
diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/intel_rdt_ui.txt
index 756fd76b78a6..71c30984e94d 100644
--- a/Documentation/x86/intel_rdt_ui.txt
+++ b/Documentation/x86/intel_rdt_ui.txt
@@ -671,7 +671,7 @@ occupancy of the real time threads on these cores.
# mkdir p1
Move the cpus 4-7 over to p1
-# echo f0 > p0/cpus
+# echo f0 > p1/cpus
View the llc occupancy snapshot
diff --git a/Documentation/x86/topology.txt b/Documentation/x86/topology.txt
index f3e9d7e9ed6c..2953e3ec9a02 100644
--- a/Documentation/x86/topology.txt
+++ b/Documentation/x86/topology.txt
@@ -108,7 +108,7 @@ The topology of a system is described in the units of:
The number of online threads is also printed in /proc/cpuinfo "siblings."
- - topology_sibling_mask():
+ - topology_sibling_cpumask():
The cpumask contains all online threads in the core to which a thread
belongs.