diff options
Diffstat (limited to 'Documentation')
5 files changed, 15 insertions, 40 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty new file mode 100644 index 000000000000..2bf6b24e781b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty @@ -0,0 +1,6 @@ +What: /sys/class/leds/<led>/ttyname +Date: Dec 2020 +KernelVersion: 5.10 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the tty device name of the triggering tty diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index c139c5edb93e..512a84942f78 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -51,6 +51,7 @@ properties: - renesas,hscif-r8a77980 # R-Car V3H - renesas,hscif-r8a77990 # R-Car E3 - renesas,hscif-r8a77995 # R-Car D3 + - renesas,hscif-r8a779a0 # R-Car V3U - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2 - const: renesas,hscif # generic HSCIF compatible UART diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt deleted file mode 100644 index 1e48bbbeecc6..000000000000 --- a/Documentation/devicetree/bindings/serial/sirf-uart.txt +++ /dev/null @@ -1,34 +0,0 @@ -* CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter * - -Required properties: -- compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart", - "sirf,atlas7-uart" or "sirf,atlas7-usp-uart". -- reg : Offset and length of the register set for the device -- interrupts : Should contain uart interrupt -- fifosize : Should define hardware rx/tx fifo size -- clocks : Should contain uart clock number - -Optional properties: -- uart-has-rtscts: we have hardware flow controller pins in hardware -- rts-gpios: RTS pin for USP-based UART if uart-has-rtscts is true -- cts-gpios: CTS pin for USP-based UART if uart-has-rtscts is true - -Example: - -uart0: uart@b0050000 { - cell-index = <0>; - compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x1000>; - interrupts = <17>; - fifosize = <128>; - clocks = <&clks 13>; -}; - -On the board-specific dts, we can put rts-gpios and cts-gpios like - -usp@b0090000 { - compatible = "sirf,prima2-usp-uart"; - uart-has-rtscts; - rts-gpios = <&gpio 15 0>; - cts-gpios = <&gpio 46 0>; -}; diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 06d5f251ec88..8631678283f9 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -50,11 +50,14 @@ properties: minItems: 1 maxItems: 2 - cts-gpios: - maxItems: 1 - - rts-gpios: - maxItems: 1 +# cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts' +# or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow +# control instead of dedicated pins. +# +# It should be noted that both cts-gpios/rts-gpios and 'uart-has-rtscts' or +# 'st,hw-flow-ctrl' (deprecated) properties cannot co-exist in a design. + cts-gpios: true + rts-gpios: true wakeup-source: true diff --git a/Documentation/networking/caif/caif.rst b/Documentation/networking/caif/caif.rst index a07213030ccf..81a14373d780 100644 --- a/Documentation/networking/caif/caif.rst +++ b/Documentation/networking/caif/caif.rst @@ -68,7 +68,6 @@ There are debugfs parameters provided for serial communication. * tty_status: Prints the bit-mask tty status information - 0x01 - tty->warned is on. - - 0x02 - tty->low_latency is on. - 0x04 - tty->packed is on. - 0x08 - tty->flow_stopped is on. - 0x10 - tty->hw_stopped is on. |