1 files changed, 77 insertions, 5 deletions

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 289fe1b7d25a..38e9033d2e86 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -37,6 +37,8 @@
 #include <mach/nand.h>
 #include <mach/keyscan.h>
 
+#include <media/tvp514x.h>
+
 static inline int have_imager(void)
 {
 	/* REVISIT when it's supported, trigger via Kconfig */
@@ -192,7 +194,11 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
-#ifdef CONFIG_KEYBOARD_DAVINCI
+static int dm365evm_keyscan_enable(struct device *dev)
+{
+	return davinci_cfg_reg(DM365_KEYSCAN);
+}
+
 static unsigned short dm365evm_keymap[] = {
 	KEY_KP2,
 	KEY_LEFT,
@@ -214,6 +220,7 @@ static unsigned short dm365evm_keymap[] = {
 };
 
 static struct davinci_ks_platform_data dm365evm_ks_data = {
+	.device_enable	= dm365evm_keyscan_enable,
 	.keymap		= dm365evm_keymap,
 	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
 	.rep		= 1,
@@ -222,7 +229,6 @@ static struct davinci_ks_platform_data dm365evm_ks_data = {
 	.interval	= 0x2,
 	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
 };
-#endif
 
 static int cpld_mmc_get_cd(int module)
 {
@@ -302,6 +308,73 @@ static void dm365evm_mmc_configure(void)
 	davinci_cfg_reg(DM365_SD1_DATA0);
 }
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL        (V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.i2c_adapter_id = 1,
+	.card_name = "DM365 EVM",
+	.ccdc = "ISIF",
+};
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
@@ -493,6 +566,8 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm365_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm365_set_vpfe_config(&vpfe_cfg);
 	dm365_init();
 }
 
@@ -511,10 +586,7 @@ static __init void dm365_evm_init(void)
 
 	dm365_init_asp(&dm365_evm_snd_data);
 	dm365_init_rtc();
-
-#ifdef CONFIG_KEYBOARD_DAVINCI
 	dm365_init_ks(&dm365evm_ks_data);
-#endif
 }
 
 static __init void dm365_evm_irq_init(void)