summaryrefslogtreecommitdiff
path: root/arch/arm/mach-kirkwood/netspace_v2-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-kirkwood/netspace_v2-setup.c')
-rw-r--r--arch/arm/mach-kirkwood/netspace_v2-setup.c128
1 files changed, 10 insertions, 118 deletions
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index d26bf324738b..5e286441b8f4 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -24,56 +24,19 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/leds-ns2.h>
-#include <plat/time.h>
#include "common.h"
#include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netspace_v2_flash_parts[] = {
- {
- .name = "u-boot",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static const struct flash_platform_data netspace_v2_flash = {
- .type = "mx25l4005a",
- .name = "spi_flash",
- .parts = netspace_v2_flash_parts,
- .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &netspace_v2_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
+#include "lacie_v2-common.h"
/*****************************************************************************
* Ethernet
@@ -84,27 +47,6 @@ static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
};
/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
- .byte_len = SZ_4K / 8,
- .page_size = 16,
-};
-
-/*
- * i2c addr | chip | description
- * 0x50 | HT24LC04 | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
- {
- I2C_BOARD_INFO("24c04", 0x50),
- .platform_data = &at24c04,
- }
-};
-
-/*****************************************************************************
* SATA
****************************************************************************/
@@ -112,35 +54,6 @@ static struct mv_sata_platform_data netspace_v2_sata_data = {
.n_ports = 2,
};
-#define NETSPACE_V2_GPIO_SATA0_POWER 16
-#define NETSPACE_V2_GPIO_SATA1_POWER 17
-
-static void __init netspace_v2_sata_power_init(void)
-{
- int err;
-
- err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
- if (err == 0) {
- err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
- if (err)
- gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
- }
- if (err)
- pr_err("netspace_v2: failed to setup SATA0 power\n");
-
- if (machine_is_netspace_max_v2()) {
- err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
- if (err == 0) {
- err = gpio_direction_output(
- NETSPACE_V2_GPIO_SATA1_POWER, 1);
- if (err)
- gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
- }
- if (err)
- pr_err("netspace_v2: failed to setup SATA1 power\n");
- }
-}
-
/*****************************************************************************
* GPIO keys
****************************************************************************/
@@ -224,20 +137,6 @@ static struct platform_device netspace_v2_leds = {
};
/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void netspace_v2_timer_init(void)
-{
- kirkwood_tclk = 166666667;
- orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer netspace_v2_timer = {
- .init = netspace_v2_timer_init,
-};
-
-/*****************************************************************************
* General Setup
****************************************************************************/
@@ -291,18 +190,17 @@ static void __init netspace_v2_init(void)
kirkwood_init();
kirkwood_mpp_conf(netspace_v2_mpp_config);
- netspace_v2_sata_power_init();
+ if (machine_is_netspace_max_v2())
+ lacie_v2_hdd_power_init(2);
+ else
+ lacie_v2_hdd_power_init(1);
kirkwood_ehci_init();
kirkwood_ge00_init(&netspace_v2_ge00_data);
kirkwood_sata_init(&netspace_v2_sata_data);
kirkwood_uart0_init();
- spi_register_board_info(netspace_v2_spi_slave_info,
- ARRAY_SIZE(netspace_v2_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_i2c_init();
- i2c_register_board_info(0, netspace_v2_i2c_info,
- ARRAY_SIZE(netspace_v2_i2c_info));
+ lacie_v2_register_flash();
+ lacie_v2_register_i2c_devices();
platform_device_register(&netspace_v2_leds);
platform_device_register(&netspace_v2_gpio_leds);
@@ -317,36 +215,30 @@ static void __init netspace_v2_init(void)
#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netspace_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_INETSPACE_V2
MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netspace_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_NETSPACE_MAX_V2
MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &netspace_v2_timer,
+ .timer = &lacie_v2_timer,
MACHINE_END
#endif