1 files changed, 0 insertions, 161 deletions
diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h
deleted file mode 100644
index 5ba5df47f91b..000000000000
--- a/arch/arm/mach-omap2/omap-pm.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * omap-pm.h - OMAP power management interface
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- * Paul Walmsley
- *
- * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
- * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
- * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
- * Richard Woodruff
- */
-
-#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
-#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
-
-#include <linux/device.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/pm_opp.h>
-
-/*
- * agent_id values for use with omap_pm_set_min_bus_tput():
- *
- * OCP_INITIATOR_AGENT is only valid for devices that can act as
- * initiators -- it represents the device's L3 interconnect
- * connection.  OCP_TARGET_AGENT represents the device's L4
- * interconnect connection.
- */
-#define OCP_TARGET_AGENT		1
-#define OCP_INITIATOR_AGENT		2
-
-/**
- * omap_pm_if_early_init - OMAP PM init code called before clock fw init
- * @mpu_opp_table: array ptr to struct omap_opp for MPU
- * @dsp_opp_table: array ptr to struct omap_opp for DSP
- * @l3_opp_table : array ptr to struct omap_opp for CORE
- *
- * Initialize anything that must be configured before the clock
- * framework starts.  The "_if_" is to avoid name collisions with the
- * PM idle-loop code.
- */
-int __init omap_pm_if_early_init(void);
-
-/**
- * omap_pm_if_init - OMAP PM init code called after clock fw init
- *
- * The main initialization code.  OPP tables are passed in here.  The
- * "_if_" is to avoid name collisions with the PM idle-loop code.
- */
-int __init omap_pm_if_init(void);
-
-/*
- * Device-driver-originated constraints (via board-*.c files, platform_data)
- */
-
-
-/**
- * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
- * @dev: struct device * requesting the constraint
- * @t: maximum MPU wakeup latency in microseconds
- *
- * Request that the maximum interrupt latency for the MPU to be no
- * greater than @t microseconds. "Interrupt latency" in this case is
- * defined as the elapsed time from the occurrence of a hardware or
- * timer interrupt to the time when the device driver's interrupt
- * service routine has been entered by the MPU.
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the MPU powerdomain into, and
- * possibly the CORE powerdomain as well, since interrupt handling
- * code currently runs from SDRAM.  Advanced PM or board*.c code may
- * also configure interrupt controller priorities, OCP bus priorities,
- * CPU speed(s), etc.
- *
- * This function will not affect device wakeup latency, e.g., time
- * elapsed from when a device driver enables a hardware device with
- * clk_enable(), to when the device is ready for register access or
- * other use.  To control this device wakeup latency, use
- * omap_pm_set_max_dev_wakeup_lat()
- *
- * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
- * previous t value.  To remove the latency target for the MPU, call
- * with t = -1.
- *
- * XXX This constraint will be deprecated soon in favor of the more
- * general omap_pm_set_max_dev_wakeup_lat()
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
-
-
-/**
- * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
- * @dev: struct device * requesting the constraint
- * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
- * @r: minimum throughput (in KiB/s)
- *
- * Request that the minimum data throughput on the OCP interconnect
- * attached to device @dev interconnect agent @tbus_id be no less
- * than @r KiB/s.
- *
- * It is expected that the OMAP PM or bus code will use this
- * information to set the interconnect clock to run at the lowest
- * possible speed that satisfies all current system users.  The PM or
- * bus code will adjust the estimate based on its model of the bus, so
- * device driver authors should attempt to specify an accurate
- * quantity for their device use case, and let the PM or bus code
- * overestimate the numbers as necessary to handle request/response
- * latency, other competing users on the system, etc.  On OMAP2/3, if
- * a driver requests a minimum L4 interconnect speed constraint, the
- * code will also need to add an minimum L3 interconnect speed
- * constraint,
- *
- * Multiple calls to omap_pm_set_min_bus_tput() will replace the
- * previous rate value for this device.  To remove the interconnect
- * throughput restriction for this device, call with r = 0.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
-
-
-/*
- * CPUFreq-originated constraint
- *
- * In the future, this should be handled by custom OPP clocktype
- * functions.
- */
-
-
-/*
- * Device context loss tracking
- */
-
-/**
- * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
- * @dev: struct device *
- *
- * This function returns the number of times that the device @dev has
- * lost its internal context.  This generally occurs on a powerdomain
- * transition to OFF.  Drivers use this as an optimization to avoid restoring
- * context if the device hasn't lost it.  To use, drivers should initially
- * call this in their context save functions and store the result.  Early in
- * the driver's context restore function, the driver should call this function
- * again, and compare the result to the stored counter.  If they differ, the
- * driver must restore device context.   If the number of context losses
- * exceeds the maximum positive integer, the function will wrap to 0 and
- * continue counting.  Returns the number of context losses for this device,
- * or negative value upon error.
- */
-int omap_pm_get_dev_context_loss_count(struct device *dev);
-
-void omap_pm_enable_off_mode(void);
-void omap_pm_disable_off_mode(void);
-
-#endif