summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi')
-rw-r--r--arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi61
1 files changed, 61 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 88a7938017aa..959a0ad1d367 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -41,6 +41,15 @@
regulator-always-on;
};
+ reg_1p1v: regulator-vdd-core {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
@@ -84,6 +93,18 @@
clock-frequency = <24000000>;
};
+&gpu {
+ mali-supply = <&reg_1p1v>;
+};
+
+&ostm1 {
+ status = "okay";
+};
+
+&ostm2 {
+ status = "okay";
+};
+
&pinctrl {
eth0_pins: eth0 {
pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
@@ -110,6 +131,18 @@
line-name = "gpio_sd0_pwr_en";
};
+ qspi0_pins: qspi0 {
+ qspi0-data {
+ pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+ power-source = <1800>;
+ };
+
+ qspi0-ctrl {
+ pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
+ power-source = <1800>;
+ };
+ };
+
/*
* SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
* The below switch logic can be used to select the device between
@@ -175,6 +208,34 @@
};
};
+&sbc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ compatible = "micron,mt25qu512a", "jedec,spi-nor";
+ reg = <0>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ reg = <0x00000000 0x2000000>;
+ read-only;
+ };
+ user@2000000 {
+ reg = <0x2000000 0x2000000>;
+ };
+ };
+ };
+};
+
#if (!SW_SD0_DEV_SEL)
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;