summaryrefslogtreecommitdiff
path: root/arch/cris/arch-v10/kernel/debugport.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/arch-v10/kernel/debugport.c')
-rw-r--r--arch/cris/arch-v10/kernel/debugport.c560
1 files changed, 0 insertions, 560 deletions
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
deleted file mode 100644
index d30834d4dd7e..000000000000
--- a/arch/cris/arch-v10/kernel/debugport.c
+++ /dev/null
@@ -1,560 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Serialport functions for debugging
- *
- * Copyright (c) 2000-2007 Axis Communications AB
- *
- * Authors: Bjorn Wesen
- *
- * Exports:
- * console_print_etrax(char *buf)
- * int getDebugChar()
- * putDebugChar(int)
- * enableDebugIRQ()
- * init_etrax_debug()
- *
- */
-
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <arch/svinto.h>
-
-extern void reset_watchdog(void);
-
-struct dbg_port
-{
- unsigned int index;
- const volatile unsigned* read;
- volatile char* write;
- volatile unsigned* xoff;
- volatile char* baud;
- volatile char* tr_ctrl;
- volatile char* rec_ctrl;
- unsigned long irq;
- unsigned int started;
- unsigned long baudrate;
- unsigned char parity;
- unsigned int bits;
-};
-
-struct dbg_port ports[]=
-{
- {
- 0,
- R_SERIAL0_READ,
- R_SERIAL0_TR_DATA,
- R_SERIAL0_XOFF,
- R_SERIAL0_BAUD,
- R_SERIAL0_TR_CTRL,
- R_SERIAL0_REC_CTRL,
- IO_STATE(R_IRQ_MASK1_SET, ser0_data, set),
- 0,
- 115200,
- 'N',
- 8
- },
- {
- 1,
- R_SERIAL1_READ,
- R_SERIAL1_TR_DATA,
- R_SERIAL1_XOFF,
- R_SERIAL1_BAUD,
- R_SERIAL1_TR_CTRL,
- R_SERIAL1_REC_CTRL,
- IO_STATE(R_IRQ_MASK1_SET, ser1_data, set),
- 0,
- 115200,
- 'N',
- 8
- },
- {
- 2,
- R_SERIAL2_READ,
- R_SERIAL2_TR_DATA,
- R_SERIAL2_XOFF,
- R_SERIAL2_BAUD,
- R_SERIAL2_TR_CTRL,
- R_SERIAL2_REC_CTRL,
- IO_STATE(R_IRQ_MASK1_SET, ser2_data, set),
- 0,
- 115200,
- 'N',
- 8
- },
- {
- 3,
- R_SERIAL3_READ,
- R_SERIAL3_TR_DATA,
- R_SERIAL3_XOFF,
- R_SERIAL3_BAUD,
- R_SERIAL3_TR_CTRL,
- R_SERIAL3_REC_CTRL,
- IO_STATE(R_IRQ_MASK1_SET, ser3_data, set),
- 0,
- 115200,
- 'N',
- 8
- }
-};
-
-#ifdef CONFIG_ETRAX_SERIAL
-extern struct tty_driver *serial_driver;
-#endif
-
-struct dbg_port* port =
-#if defined(CONFIG_ETRAX_DEBUG_PORT0)
- &ports[0];
-#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
- &ports[1];
-#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
- &ports[2];
-#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
- &ports[3];
-#else
- NULL;
-#endif
-
-static struct dbg_port* kgdb_port =
-#if defined(CONFIG_ETRAX_KGDB_PORT0)
- &ports[0];
-#elif defined(CONFIG_ETRAX_KGDB_PORT1)
- &ports[1];
-#elif defined(CONFIG_ETRAX_KGDB_PORT2)
- &ports[2];
-#elif defined(CONFIG_ETRAX_KGDB_PORT3)
- &ports[3];
-#else
- NULL;
-#endif
-
-static void
-start_port(struct dbg_port* p)
-{
- unsigned long rec_ctrl = 0;
- unsigned long tr_ctrl = 0;
-
- if (!p)
- return;
-
- if (p->started)
- return;
- p->started = 1;
-
- if (p->index == 0)
- {
- genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6);
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused);
- }
- else if (p->index == 1)
- {
- genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8);
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb);
- }
- else if (p->index == 2)
- {
- genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2);
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0);
- genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3);
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0);
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, ser2, select);
- }
- else
- {
- genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4);
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1);
- genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5);
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1);
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, ser3, select);
- }
-
- *R_GEN_CONFIG = genconfig_shadow;
-
- *p->xoff =
- IO_STATE(R_SERIAL0_XOFF, tx_stop, enable) |
- IO_STATE(R_SERIAL0_XOFF, auto_xoff, disable) |
- IO_FIELD(R_SERIAL0_XOFF, xoff_char, 0);
-
- switch (p->baudrate)
- {
- case 0:
- case 115200:
- *p->baud =
- IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) |
- IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz);
- break;
- case 1200:
- *p->baud =
- IO_STATE(R_SERIAL0_BAUD, tr_baud, c1200Hz) |
- IO_STATE(R_SERIAL0_BAUD, rec_baud, c1200Hz);
- break;
- case 2400:
- *p->baud =
- IO_STATE(R_SERIAL0_BAUD, tr_baud, c2400Hz) |
- IO_STATE(R_SERIAL0_BAUD, rec_baud, c2400Hz);
- break;
- case 4800:
- *p->baud =
- IO_STATE(R_SERIAL0_BAUD, tr_baud, c4800Hz) |
- IO_STATE(R_SERIAL0_BAUD, rec_baud, c4800Hz);
- break;
- case 9600:
- *p->baud =
- IO_STATE(R_SERIAL0_BAUD, tr_baud, c9600Hz) |
- IO_STATE(R_SERIAL0_BAUD, rec_baud, c9600Hz);
- break;
- case 19200:
- *p->baud =
- IO_STATE(R_SERIAL0_BAUD, tr_baud, c19k2Hz) |
- IO_STATE(R_SERIAL0_BAUD, rec_baud, c19k2Hz);
- break;
- case 38400:
- *p->baud =
- IO_STATE(R_SERIAL0_BAUD, tr_baud, c38k4Hz) |
- IO_STATE(R_SERIAL0_BAUD, rec_baud, c38k4Hz);
- break;
- case 57600:
- *p->baud =
- IO_STATE(R_SERIAL0_BAUD, tr_baud, c57k6Hz) |
- IO_STATE(R_SERIAL0_BAUD, rec_baud, c57k6Hz);
- break;
- default:
- *p->baud =
- IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) |
- IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz);
- break;
- }
-
- if (p->parity == 'E') {
- rec_ctrl =
- IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) |
- IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
- tr_ctrl =
- IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) |
- IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
- } else if (p->parity == 'O') {
- rec_ctrl =
- IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd) |
- IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
- tr_ctrl =
- IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd) |
- IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
- } else {
- rec_ctrl =
- IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) |
- IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, disable);
- tr_ctrl =
- IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) |
- IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, disable);
- }
- if (p->bits == 7)
- {
- rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit);
- tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit);
- }
- else
- {
- rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_8bit);
- tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_8bit);
- }
-
- *p->rec_ctrl =
- IO_STATE(R_SERIAL0_REC_CTRL, dma_err, stop) |
- IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable) |
- IO_STATE(R_SERIAL0_REC_CTRL, rts_, active) |
- IO_STATE(R_SERIAL0_REC_CTRL, sampling, middle) |
- IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, normal) |
- rec_ctrl;
-
- *p->tr_ctrl =
- IO_FIELD(R_SERIAL0_TR_CTRL, txd, 0) |
- IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable) |
- IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, disabled) |
- IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, one_bit) |
- IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, normal) |
- tr_ctrl;
-}
-
-static void
-console_write_direct(struct console *co, const char *buf, unsigned int len)
-{
- int i;
- unsigned long flags;
-
- if (!port)
- return;
-
- local_irq_save(flags);
-
- /* Send data */
- for (i = 0; i < len; i++) {
- /* LF -> CRLF */
- if (buf[i] == '\n') {
- while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
- ;
- *port->write = '\r';
- }
- /* Wait until transmitter is ready and send.*/
- while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
- ;
- *port->write = buf[i];
- }
-
- /*
- * Feed the watchdog, otherwise it will reset the chip during boot.
- * The time to send an ordinary boot message line (10-90 chars)
- * varies between 1-8ms at 115200. What makes up for the additional
- * 90ms that allows the watchdog to bite?
- */
- reset_watchdog();
-
- local_irq_restore(flags);
-}
-
-static void
-console_write(struct console *co, const char *buf, unsigned int len)
-{
- if (!port)
- return;
-
- console_write_direct(co, buf, len);
-}
-
-/* legacy function */
-
-void
-console_print_etrax(const char *buf)
-{
- console_write(NULL, buf, strlen(buf));
-}
-
-/* Use polling to get a single character FROM the debug port */
-
-int
-getDebugChar(void)
-{
- unsigned long readval;
-
- if (!kgdb_port)
- return 0;
-
- do {
- readval = *kgdb_port->read;
- } while (!(readval & IO_MASK(R_SERIAL0_READ, data_avail)));
-
- return (readval & IO_MASK(R_SERIAL0_READ, data_in));
-}
-
-/* Use polling to put a single character to the debug port */
-
-void
-putDebugChar(int val)
-{
- if (!kgdb_port)
- return;
-
- while (!(*kgdb_port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
- ;
- *kgdb_port->write = val;
-}
-
-/* Enable irq for receiving chars on the debug port, used by kgdb */
-
-void
-enableDebugIRQ(void)
-{
- if (!kgdb_port)
- return;
-
- *R_IRQ_MASK1_SET = kgdb_port->irq;
- /* use R_VECT_MASK directly, since we really bypass Linux normal
- * IRQ handling in kgdb anyway, we don't need to use enable_irq
- */
- *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
-
- *kgdb_port->rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable);
-}
-
-static int __init
-console_setup(struct console *co, char *options)
-{
- char* s;
-
- if (options) {
- port = &ports[co->index];
- port->baudrate = 115200;
- port->parity = 'N';
- port->bits = 8;
- port->baudrate = simple_strtoul(options, NULL, 10);
- s = options;
- while(*s >= '0' && *s <= '9')
- s++;
- if (*s) port->parity = *s++;
- if (*s) port->bits = *s++ - '0';
- port->started = 0;
- start_port(0);
- }
- return 0;
-}
-
-
-/* This is a dummy serial device that throws away anything written to it.
- * This is used when no debug output is wanted.
- */
-static struct tty_driver dummy_driver;
-
-static int dummy_open(struct tty_struct *tty, struct file * filp)
-{
- return 0;
-}
-
-static void dummy_close(struct tty_struct *tty, struct file * filp)
-{
-}
-
-static int dummy_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
-{
- return count;
-}
-
-static int dummy_write_room(struct tty_struct *tty)
-{
- return 8192;
-}
-
-static const struct tty_operations dummy_ops = {
- .open = dummy_open,
- .close = dummy_close,
- .write = dummy_write,
- .write_room = dummy_write_room,
-};
-
-void __init
-init_dummy_console(void)
-{
- memset(&dummy_driver, 0, sizeof(struct tty_driver));
- dummy_driver.driver_name = "serial";
- dummy_driver.name = "ttyS";
- dummy_driver.major = TTY_MAJOR;
- dummy_driver.minor_start = 68;
- dummy_driver.num = 1; /* etrax100 has 4 serial ports */
- dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
- dummy_driver.subtype = SERIAL_TYPE_NORMAL;
- dummy_driver.init_termios = tty_std_termios;
- /* Normally B9600 default... */
- dummy_driver.init_termios.c_cflag =
- B115200 | CS8 | CREAD | HUPCL | CLOCAL;
- dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- dummy_driver.init_termios.c_ispeed = 115200;
- dummy_driver.init_termios.c_ospeed = 115200;
-
- dummy_driver.ops = &dummy_ops;
- if (tty_register_driver(&dummy_driver))
- panic("Couldn't register dummy serial driver\n");
-}
-
-static struct tty_driver*
-etrax_console_device(struct console* co, int *index)
-{
- if (port)
- *index = port->index;
- else
- *index = 0;
-#ifdef CONFIG_ETRAX_SERIAL
- return port ? serial_driver : &dummy_driver;
-#else
- return &dummy_driver;
-#endif
-}
-
-static struct console ser_console = {
- name : "ttyS",
- write: console_write,
- read : NULL,
- device : etrax_console_device,
- unblank : NULL,
- setup : console_setup,
- flags : CON_PRINTBUFFER,
- index : -1,
- cflag : 0,
- next : NULL
-};
-static struct console ser0_console = {
- name : "ttyS",
- write: console_write,
- read : NULL,
- device : etrax_console_device,
- unblank : NULL,
- setup : console_setup,
- flags : CON_PRINTBUFFER,
- index : 0,
- cflag : 0,
- next : NULL
-};
-
-static struct console ser1_console = {
- name : "ttyS",
- write: console_write,
- read : NULL,
- device : etrax_console_device,
- unblank : NULL,
- setup : console_setup,
- flags : CON_PRINTBUFFER,
- index : 1,
- cflag : 0,
- next : NULL
-};
-static struct console ser2_console = {
- name : "ttyS",
- write: console_write,
- read : NULL,
- device : etrax_console_device,
- unblank : NULL,
- setup : console_setup,
- flags : CON_PRINTBUFFER,
- index : 2,
- cflag : 0,
- next : NULL
-};
-static struct console ser3_console = {
- name : "ttyS",
- write: console_write,
- read : NULL,
- device : etrax_console_device,
- unblank : NULL,
- setup : console_setup,
- flags : CON_PRINTBUFFER,
- index : 3,
- cflag : 0,
- next : NULL
-};
-/*
- * Register console (for printk's etc)
- */
-
-int __init
-init_etrax_debug(void)
-{
- static int first = 1;
-
- if (!first) {
- unregister_console(&ser_console);
- register_console(&ser0_console);
- register_console(&ser1_console);
- register_console(&ser2_console);
- register_console(&ser3_console);
- init_dummy_console();
- return 0;
- }
-
- first = 0;
- register_console(&ser_console);
- start_port(port);
-#ifdef CONFIG_ETRAX_KGDB
- start_port(kgdb_port);
-#endif
- return 0;
-}
-__initcall(init_etrax_debug);