summaryrefslogtreecommitdiff
path: root/arch/cris/arch-v32/kernel/kgdb.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/arch-v32/kernel/kgdb.c')
-rw-r--r--arch/cris/arch-v32/kernel/kgdb.c1593
1 files changed, 0 insertions, 1593 deletions
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
deleted file mode 100644
index 3d6f516763a5..000000000000
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ /dev/null
@@ -1,1593 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/cris/arch-v32/kernel/kgdb.c
- *
- * CRIS v32 version by Orjan Friberg, Axis Communications AB.
- *
- * S390 version
- * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
- *
- * Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- * Contributed by HP Systems
- *
- * Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- * Copyright (C) 1995 Andreas Busse
- */
-
-/* FIXME: Check the documentation. */
-
-/*
- * kgdb usage notes:
- * -----------------
- *
- * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be
- * built with different gcc flags: "-g" is added to get debug infos, and
- * "-fomit-frame-pointer" is omitted to make debugging easier. Since the
- * resulting kernel will be quite big (approx. > 7 MB), it will be stripped
- * before compresion. Such a kernel will behave just as usually, except if
- * given a "debug=<device>" command line option. (Only serial devices are
- * allowed for <device>, i.e. no printers or the like; possible values are
- * machine depedend and are the same as for the usual debug device, the one
- * for logging kernel messages.) If that option is given and the device can be
- * initialized, the kernel will connect to the remote gdb in trap_init(). The
- * serial parameters are fixed to 8N1 and 115200 bps, for easyness of
- * implementation.
- *
- * To start a debugging session, start that gdb with the debugging kernel
- * image (the one with the symbols, vmlinux.debug) named on the command line.
- * This file will be used by gdb to get symbol and debugging infos about the
- * kernel. Next, select remote debug mode by
- * target remote <device>
- * where <device> is the name of the serial device over which the debugged
- * machine is connected. Maybe you have to adjust the baud rate by
- * set remotebaud <rate>
- * or also other parameters with stty:
- * shell stty ... </dev/...
- * If the kernel to debug has already booted, it waited for gdb and now
- * connects, and you'll see a breakpoint being reported. If the kernel isn't
- * running yet, start it now. The order of gdb and the kernel doesn't matter.
- * Another thing worth knowing about in the getting-started phase is how to
- * debug the remote protocol itself. This is activated with
- * set remotedebug 1
- * gdb will then print out each packet sent or received. You'll also get some
- * messages about the gdb stub on the console of the debugged machine.
- *
- * If all that works, you can use lots of the usual debugging techniques on
- * the kernel, e.g. inspecting and changing variables/memory, setting
- * breakpoints, single stepping and so on. It's also possible to interrupt the
- * debugged kernel by pressing C-c in gdb. Have fun! :-)
- *
- * The gdb stub is entered (and thus the remote gdb gets control) in the
- * following situations:
- *
- * - If breakpoint() is called. This is just after kgdb initialization, or if
- * a breakpoint() call has been put somewhere into the kernel source.
- * (Breakpoints can of course also be set the usual way in gdb.)
- * In eLinux, we call breakpoint() in init/main.c after IRQ initialization.
- *
- * - If there is a kernel exception, i.e. bad_super_trap() or die_if_kernel()
- * are entered. All the CPU exceptions are mapped to (more or less..., see
- * the hard_trap_info array below) appropriate signal, which are reported
- * to gdb. die_if_kernel() is usually called after some kind of access
- * error and thus is reported as SIGSEGV.
- *
- * - When panic() is called. This is reported as SIGABRT.
- *
- * - If C-c is received over the serial line, which is treated as
- * SIGINT.
- *
- * Of course, all these signals are just faked for gdb, since there is no
- * signal concept as such for the kernel. It also isn't possible --obviously--
- * to set signal handlers from inside gdb, or restart the kernel with a
- * signal.
- *
- * Current limitations:
- *
- * - While the kernel is stopped, interrupts are disabled for safety reasons
- * (i.e., variables not changing magically or the like). But this also
- * means that the clock isn't running anymore, and that interrupts from the
- * hardware may get lost/not be served in time. This can cause some device
- * errors...
- *
- * - When single-stepping, only one instruction of the current thread is
- * executed, but interrupts are allowed for that time and will be serviced
- * if pending. Be prepared for that.
- *
- * - All debugging happens in kernel virtual address space. There's no way to
- * access physical memory not mapped in kernel space, or to access user
- * space. A way to work around this is using get_user_long & Co. in gdb
- * expressions, but only for the current process.
- *
- * - Interrupting the kernel only works if interrupts are currently allowed,
- * and the interrupt of the serial line isn't blocked by some other means
- * (IPL too high, disabled, ...)
- *
- * - The gdb stub is currently not reentrant, i.e. errors that happen therein
- * (e.g. accessing invalid memory) may not be caught correctly. This could
- * be removed in future by introducing a stack of struct registers.
- *
- */
-
-/*
- * To enable debugger support, two things need to happen. One, a
- * call to kgdb_init() is necessary in order to allow any breakpoints
- * or error conditions to be properly intercepted and reported to gdb.
- * Two, a breakpoint needs to be generated to begin communication. This
- * is most easily accomplished by a call to breakpoint().
- *
- * The following gdb commands are supported:
- *
- * command function Return value
- *
- * g return the value of the CPU registers hex data or ENN
- * G set the value of the CPU registers OK or ENN
- *
- * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
- * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
- *
- * c Resume at current address SNN ( signal NN)
- * cAA..AA Continue at address AA..AA SNN
- *
- * s Step one instruction SNN
- * sAA..AA Step one instruction from AA..AA SNN
- *
- * k kill
- *
- * ? What was the last sigval ? SNN (signal NN)
- *
- * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
- * baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum. A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer. '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host: Reply:
- * $m0,10#2a +$00010203040506070809101112131415#42
- *
- */
-
-
-#include <linux/string.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/linkage.h>
-#include <linux/reboot.h>
-
-#include <asm/setup.h>
-#include <asm/ptrace.h>
-
-#include <asm/irq.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/intr_vect_defs.h>
-#include <hwregs/ser_defs.h>
-
-/* From entry.S. */
-extern void gdb_handle_exception(void);
-/* From kgdb_asm.S. */
-extern void kgdb_handle_exception(void);
-
-static int kgdb_started = 0;
-
-/********************************* Register image ****************************/
-
-typedef
-struct register_image
-{
- /* Offset */
- unsigned int r0; /* 0x00 */
- unsigned int r1; /* 0x04 */
- unsigned int r2; /* 0x08 */
- unsigned int r3; /* 0x0C */
- unsigned int r4; /* 0x10 */
- unsigned int r5; /* 0x14 */
- unsigned int r6; /* 0x18 */
- unsigned int r7; /* 0x1C */
- unsigned int r8; /* 0x20; Frame pointer (if any) */
- unsigned int r9; /* 0x24 */
- unsigned int r10; /* 0x28 */
- unsigned int r11; /* 0x2C */
- unsigned int r12; /* 0x30 */
- unsigned int r13; /* 0x34 */
- unsigned int sp; /* 0x38; R14, Stack pointer */
- unsigned int acr; /* 0x3C; R15, Address calculation register. */
-
- unsigned char bz; /* 0x40; P0, 8-bit zero register */
- unsigned char vr; /* 0x41; P1, Version register (8-bit) */
- unsigned int pid; /* 0x42; P2, Process ID */
- unsigned char srs; /* 0x46; P3, Support register select (8-bit) */
- unsigned short wz; /* 0x47; P4, 16-bit zero register */
- unsigned int exs; /* 0x49; P5, Exception status */
- unsigned int eda; /* 0x4D; P6, Exception data address */
- unsigned int mof; /* 0x51; P7, Multiply overflow register */
- unsigned int dz; /* 0x55; P8, 32-bit zero register */
- unsigned int ebp; /* 0x59; P9, Exception base pointer */
- unsigned int erp; /* 0x5D; P10, Exception return pointer. Contains the PC we are interested in. */
- unsigned int srp; /* 0x61; P11, Subroutine return pointer */
- unsigned int nrp; /* 0x65; P12, NMI return pointer */
- unsigned int ccs; /* 0x69; P13, Condition code stack */
- unsigned int usp; /* 0x6D; P14, User mode stack pointer */
- unsigned int spc; /* 0x71; P15, Single step PC */
- unsigned int pc; /* 0x75; Pseudo register (for the most part set to ERP). */
-
-} registers;
-
-typedef
-struct bp_register_image
-{
- /* Support register bank 0. */
- unsigned int s0_0;
- unsigned int s1_0;
- unsigned int s2_0;
- unsigned int s3_0;
- unsigned int s4_0;
- unsigned int s5_0;
- unsigned int s6_0;
- unsigned int s7_0;
- unsigned int s8_0;
- unsigned int s9_0;
- unsigned int s10_0;
- unsigned int s11_0;
- unsigned int s12_0;
- unsigned int s13_0;
- unsigned int s14_0;
- unsigned int s15_0;
-
- /* Support register bank 1. */
- unsigned int s0_1;
- unsigned int s1_1;
- unsigned int s2_1;
- unsigned int s3_1;
- unsigned int s4_1;
- unsigned int s5_1;
- unsigned int s6_1;
- unsigned int s7_1;
- unsigned int s8_1;
- unsigned int s9_1;
- unsigned int s10_1;
- unsigned int s11_1;
- unsigned int s12_1;
- unsigned int s13_1;
- unsigned int s14_1;
- unsigned int s15_1;
-
- /* Support register bank 2. */
- unsigned int s0_2;
- unsigned int s1_2;
- unsigned int s2_2;
- unsigned int s3_2;
- unsigned int s4_2;
- unsigned int s5_2;
- unsigned int s6_2;
- unsigned int s7_2;
- unsigned int s8_2;
- unsigned int s9_2;
- unsigned int s10_2;
- unsigned int s11_2;
- unsigned int s12_2;
- unsigned int s13_2;
- unsigned int s14_2;
- unsigned int s15_2;
-
- /* Support register bank 3. */
- unsigned int s0_3; /* BP_CTRL */
- unsigned int s1_3; /* BP_I0_START */
- unsigned int s2_3; /* BP_I0_END */
- unsigned int s3_3; /* BP_D0_START */
- unsigned int s4_3; /* BP_D0_END */
- unsigned int s5_3; /* BP_D1_START */
- unsigned int s6_3; /* BP_D1_END */
- unsigned int s7_3; /* BP_D2_START */
- unsigned int s8_3; /* BP_D2_END */
- unsigned int s9_3; /* BP_D3_START */
- unsigned int s10_3; /* BP_D3_END */
- unsigned int s11_3; /* BP_D4_START */
- unsigned int s12_3; /* BP_D4_END */
- unsigned int s13_3; /* BP_D5_START */
- unsigned int s14_3; /* BP_D5_END */
- unsigned int s15_3; /* BP_RESERVED */
-
-} support_registers;
-
-enum register_name
-{
- R0, R1, R2, R3,
- R4, R5, R6, R7,
- R8, R9, R10, R11,
- R12, R13, SP, ACR,
-
- BZ, VR, PID, SRS,
- WZ, EXS, EDA, MOF,
- DZ, EBP, ERP, SRP,
- NRP, CCS, USP, SPC,
- PC,
-
- S0, S1, S2, S3,
- S4, S5, S6, S7,
- S8, S9, S10, S11,
- S12, S13, S14, S15
-
-};
-
-/* The register sizes of the registers in register_name. An unimplemented register
- is designated by size 0 in this array. */
-static int register_size[] =
-{
- 4, 4, 4, 4,
- 4, 4, 4, 4,
- 4, 4, 4, 4,
- 4, 4, 4, 4,
-
- 1, 1, 4, 1,
- 2, 4, 4, 4,
- 4, 4, 4, 4,
- 4, 4, 4, 4,
-
- 4,
-
- 4, 4, 4, 4,
- 4, 4, 4, 4,
- 4, 4, 4, 4,
- 4, 4, 4
-
-};
-
-/* Contains the register image of the kernel.
- (Global so that they can be reached from assembler code.) */
-registers reg;
-support_registers sreg;
-
-/************** Prototypes for local library functions ***********************/
-
-/* Copy of strcpy from libc. */
-static char *gdb_cris_strcpy(char *s1, const char *s2);
-
-/* Copy of strlen from libc. */
-static int gdb_cris_strlen(const char *s);
-
-/* Copy of memchr from libc. */
-static void *gdb_cris_memchr(const void *s, int c, int n);
-
-/* Copy of strtol from libc. Does only support base 16. */
-static int gdb_cris_strtol(const char *s, char **endptr, int base);
-
-/********************** Prototypes for local functions. **********************/
-
-/* Write a value to a specified register regno in the register image
- of the current thread. */
-static int write_register(int regno, char *val);
-
-/* Read a value from a specified register in the register image. Returns the
- status of the read operation. The register value is returned in valptr. */
-static int read_register(char regno, unsigned int *valptr);
-
-/* Serial port, reads one character. ETRAX 100 specific. from debugport.c */
-int getDebugChar(void);
-
-/* Serial port, writes one character. ETRAX 100 specific. from debugport.c */
-void putDebugChar(int val);
-
-/* Convert the memory, pointed to by mem into hexadecimal representation.
- Put the result in buf, and return a pointer to the last character
- in buf (null). */
-static char *mem2hex(char *buf, unsigned char *mem, int count);
-
-/* Put the content of the array, in binary representation, pointed to by buf
- into memory pointed to by mem, and return a pointer to
- the character after the last byte written. */
-static unsigned char *bin2mem(unsigned char *mem, unsigned char *buf, int count);
-
-/* Await the sequence $<data>#<checksum> and store <data> in the array buffer
- returned. */
-static void getpacket(char *buffer);
-
-/* Send $<data>#<checksum> from the <data> in the array buffer. */
-static void putpacket(char *buffer);
-
-/* Build and send a response packet in order to inform the host the
- stub is stopped. */
-static void stub_is_stopped(int sigval);
-
-/* All expected commands are sent from remote.c. Send a response according
- to the description in remote.c. Not static since it needs to be reached
- from assembler code. */
-void handle_exception(int sigval);
-
-/* Performs a complete re-start from scratch. ETRAX specific. */
-static void kill_restart(void);
-
-/******************** Prototypes for global functions. ***********************/
-
-/* The string str is prepended with the GDB printout token and sent. */
-void putDebugString(const unsigned char *str, int len);
-
-/* A static breakpoint to be used at startup. */
-void breakpoint(void);
-
-/* Avoid warning as the internal_stack is not used in the C-code. */
-#define USEDVAR(name) { if (name) { ; } }
-#define USEDFUN(name) { void (*pf)(void) = (void *)name; USEDVAR(pf) }
-
-/********************************** Packet I/O ******************************/
-/* BUFMAX defines the maximum number of characters in
- inbound/outbound buffers */
-/* FIXME: How do we know it's enough? */
-#define BUFMAX 512
-
-/* Run-length encoding maximum length. Send 64 at most. */
-#define RUNLENMAX 64
-
-/* The inbound/outbound buffers used in packet I/O */
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-
-/* Error and warning messages. */
-enum error_type
-{
- SUCCESS, E01, E02, E03, E04, E05, E06, E07, E08
-};
-
-static char *error_message[] =
-{
- "",
- "E01 Set current or general thread - H[c,g] - internal error.",
- "E02 Change register content - P - cannot change read-only register.",
- "E03 Thread is not alive.", /* T, not used. */
- "E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.",
- "E05 Change register content - P - the register is not implemented..",
- "E06 Change memory content - M - internal error.",
- "E07 Change register content - P - the register is not stored on the stack",
- "E08 Invalid parameter"
-};
-
-/********************************** Breakpoint *******************************/
-/* Use an internal stack in the breakpoint and interrupt response routines.
- FIXME: How do we know the size of this stack is enough?
- Global so it can be reached from assembler code. */
-#define INTERNAL_STACK_SIZE 1024
-char internal_stack[INTERNAL_STACK_SIZE];
-
-/* Due to the breakpoint return pointer, a state variable is needed to keep
- track of whether it is a static (compiled) or dynamic (gdb-invoked)
- breakpoint to be handled. A static breakpoint uses the content of register
- ERP as it is whereas a dynamic breakpoint requires subtraction with 2
- in order to execute the instruction. The first breakpoint is static; all
- following are assumed to be dynamic. */
-static int dynamic_bp = 0;
-
-/********************************* String library ****************************/
-/* Single-step over library functions creates trap loops. */
-
-/* Copy char s2[] to s1[]. */
-static char*
-gdb_cris_strcpy(char *s1, const char *s2)
-{
- char *s = s1;
-
- for (s = s1; (*s++ = *s2++) != '\0'; )
- ;
- return s1;
-}
-
-/* Find length of s[]. */
-static int
-gdb_cris_strlen(const char *s)
-{
- const char *sc;
-
- for (sc = s; *sc != '\0'; sc++)
- ;
- return (sc - s);
-}
-
-/* Find first occurrence of c in s[n]. */
-static void*
-gdb_cris_memchr(const void *s, int c, int n)
-{
- const unsigned char uc = c;
- const unsigned char *su;
-
- for (su = s; 0 < n; ++su, --n)
- if (*su == uc)
- return (void *)su;
- return NULL;
-}
-/******************************* Standard library ****************************/
-/* Single-step over library functions creates trap loops. */
-/* Convert string to long. */
-static int
-gdb_cris_strtol(const char *s, char **endptr, int base)
-{
- char *s1;
- char *sd;
- int x = 0;
-
- for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
- x = x * base + (sd - hex_asc);
-
- if (endptr) {
- /* Unconverted suffix is stored in endptr unless endptr is NULL. */
- *endptr = s1;
- }
-
- return x;
-}
-
-/********************************* Register image ****************************/
-
-/* Write a value to a specified register in the register image of the current
- thread. Returns status code SUCCESS, E02, E05 or E08. */
-static int
-write_register(int regno, char *val)
-{
- int status = SUCCESS;
-
- if (regno >= R0 && regno <= ACR) {
- /* Consecutive 32-bit registers. */
- if (hex2bin((unsigned char *)&reg.r0 + (regno - R0) * sizeof(unsigned int),
- val, sizeof(unsigned int)))
- status = E08;
-
- } else if (regno == BZ || regno == VR || regno == WZ || regno == DZ) {
- /* Read-only registers. */
- status = E02;
-
- } else if (regno == PID) {
- /* 32-bit register. (Even though we already checked SRS and WZ, we cannot
- combine this with the EXS - SPC write since SRS and WZ have different size.) */
- if (hex2bin((unsigned char *)&reg.pid, val, sizeof(unsigned int)))
- status = E08;
-
- } else if (regno == SRS) {
- /* 8-bit register. */
- if (hex2bin((unsigned char *)&reg.srs, val, sizeof(unsigned char)))
- status = E08;
-
- } else if (regno >= EXS && regno <= SPC) {
- /* Consecutive 32-bit registers. */
- if (hex2bin((unsigned char *)&reg.exs + (regno - EXS) * sizeof(unsigned int),
- val, sizeof(unsigned int)))
- status = E08;
-
- } else if (regno == PC) {
- /* Pseudo-register. Treat as read-only. */
- status = E02;
-
- } else if (regno >= S0 && regno <= S15) {
- /* 32-bit registers. */
- if (hex2bin((unsigned char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int),
- val, sizeof(unsigned int)))
- status = E08;
- } else {
- /* Non-existing register. */
- status = E05;
- }
- return status;
-}
-
-/* Read a value from a specified register in the register image. Returns the
- value in the register or -1 for non-implemented registers. */
-static int
-read_register(char regno, unsigned int *valptr)
-{
- int status = SUCCESS;
-
- /* We read the zero registers from the register struct (instead of just returning 0)
- to catch errors. */
-
- if (regno >= R0 && regno <= ACR) {
- /* Consecutive 32-bit registers. */
- *valptr = *(unsigned int *)((char *)&reg.r0 + (regno - R0) * sizeof(unsigned int));
-
- } else if (regno == BZ || regno == VR) {
- /* Consecutive 8-bit registers. */
- *valptr = (unsigned int)(*(unsigned char *)
- ((char *)&reg.bz + (regno - BZ) * sizeof(char)));
-
- } else if (regno == PID) {
- /* 32-bit register. */
- *valptr = *(unsigned int *)((char *)&reg.pid);
-
- } else if (regno == SRS) {
- /* 8-bit register. */
- *valptr = (unsigned int)(*(unsigned char *)((char *)&reg.srs));
-
- } else if (regno == WZ) {
- /* 16-bit register. */
- *valptr = (unsigned int)(*(unsigned short *)(char *)&reg.wz);
-
- } else if (regno >= EXS && regno <= PC) {
- /* Consecutive 32-bit registers. */
- *valptr = *(unsigned int *)((char *)&reg.exs + (regno - EXS) * sizeof(unsigned int));
-
- } else if (regno >= S0 && regno <= S15) {
- /* Consecutive 32-bit registers, located elsewhere. */
- *valptr = *(unsigned int *)((char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int));
-
- } else {
- /* Non-existing register. */
- status = E05;
- }
- return status;
-
-}
-
-/********************************** Packet I/O ******************************/
-/* Convert the memory, pointed to by mem into hexadecimal representation.
- Put the result in buf, and return a pointer to the last character
- in buf (null). */
-
-static char *
-mem2hex(char *buf, unsigned char *mem, int count)
-{
- int i;
- int ch;
-
- if (mem == NULL) {
- /* Invalid address, caught by 'm' packet handler. */
- for (i = 0; i < count; i++) {
- *buf++ = '0';
- *buf++ = '0';
- }
- } else {
- /* Valid mem address. */
- for (i = 0; i < count; i++) {
- ch = *mem++;
- buf = hex_byte_pack(buf, ch);
- }
- }
- /* Terminate properly. */
- *buf = '\0';
- return buf;
-}
-
-/* Same as mem2hex, but puts it in network byte order. */
-static char *
-mem2hex_nbo(char *buf, unsigned char *mem, int count)
-{
- int i;
- int ch;
-
- mem += count - 1;
- for (i = 0; i < count; i++) {
- ch = *mem--;
- buf = hex_byte_pack(buf, ch);
- }
-
- /* Terminate properly. */
- *buf = '\0';
- return buf;
-}
-
-/* Put the content of the array, in binary representation, pointed to by buf
- into memory pointed to by mem, and return a pointer to the character after
- the last byte written.
- Gdb will escape $, #, and the escape char (0x7d). */
-static unsigned char*
-bin2mem(unsigned char *mem, unsigned char *buf, int count)
-{
- int i;
- unsigned char *next;
- for (i = 0; i < count; i++) {
- /* Check for any escaped characters. Be paranoid and
- only unescape chars that should be escaped. */
- if (*buf == 0x7d) {
- next = buf + 1;
- if (*next == 0x3 || *next == 0x4 || *next == 0x5D) {
- /* #, $, ESC */
- buf++;
- *buf += 0x20;
- }
- }
- *mem++ = *buf++;
- }
- return mem;
-}
-
-/* Await the sequence $<data>#<checksum> and store <data> in the array buffer
- returned. */
-static void
-getpacket(char *buffer)
-{
- unsigned char checksum;
- unsigned char xmitcsum;
- int i;
- int count;
- char ch;
-
- do {
- while((ch = getDebugChar ()) != '$')
- /* Wait for the start character $ and ignore all other characters */;
- checksum = 0;
- xmitcsum = -1;
- count = 0;
- /* Read until a # or the end of the buffer is reached */
- while (count < BUFMAX) {
- ch = getDebugChar();
- if (ch == '#')
- break;
- checksum = checksum + ch;
- buffer[count] = ch;
- count = count + 1;
- }
-
- if (count >= BUFMAX)
- continue;
-
- buffer[count] = 0;
-
- if (ch == '#') {
- xmitcsum = hex_to_bin(getDebugChar()) << 4;
- xmitcsum += hex_to_bin(getDebugChar());
- if (checksum != xmitcsum) {
- /* Wrong checksum */
- putDebugChar('-');
- } else {
- /* Correct checksum */
- putDebugChar('+');
- /* If sequence characters are received, reply with them */
- if (buffer[2] == ':') {
- putDebugChar(buffer[0]);
- putDebugChar(buffer[1]);
- /* Remove the sequence characters from the buffer */
- count = gdb_cris_strlen(buffer);
- for (i = 3; i <= count; i++)
- buffer[i - 3] = buffer[i];
- }
- }
- }
- } while (checksum != xmitcsum);
-}
-
-/* Send $<data>#<checksum> from the <data> in the array buffer. */
-
-static void
-putpacket(char *buffer)
-{
- int checksum;
- int runlen;
- int encode;
-
- do {
- char *src = buffer;
- putDebugChar('$');
- checksum = 0;
- while (*src) {
- /* Do run length encoding */
- putDebugChar(*src);
- checksum += *src;
- runlen = 0;
- while (runlen < RUNLENMAX && *src == src[runlen]) {
- runlen++;
- }
- if (runlen > 3) {
- /* Got a useful amount */
- putDebugChar ('*');
- checksum += '*';
- encode = runlen + ' ' - 4;
- putDebugChar(encode);
- checksum += encode;
- src += runlen;
- } else {
- src++;
- }
- }
- putDebugChar('#');
- putDebugChar(hex_asc_hi(checksum));
- putDebugChar(hex_asc_lo(checksum));
- } while(kgdb_started && (getDebugChar() != '+'));
-}
-
-/* The string str is prepended with the GDB printout token and sent. Required
- in traditional implementations. */
-void
-putDebugString(const unsigned char *str, int len)
-{
- /* Move SPC forward if we are single-stepping. */
- asm("spchere:");
- asm("move $spc, $r10");
- asm("cmp.d spchere, $r10");
- asm("bne nosstep");
- asm("nop");
- asm("move.d spccont, $r10");
- asm("move $r10, $spc");
- asm("nosstep:");
-
- output_buffer[0] = 'O';
- mem2hex(&output_buffer[1], (unsigned char *)str, len);
- putpacket(output_buffer);
-
- asm("spccont:");
-}
-
-/********************************** Handle exceptions ************************/
-/* Build and send a response packet in order to inform the host the
- stub is stopped. TAAn...:r...;n...:r...;n...:r...;
- AA = signal number
- n... = register number (hex)
- r... = register contents
- n... = `thread'
- r... = thread process ID. This is a hex integer.
- n... = other string not starting with valid hex digit.
- gdb should ignore this n,r pair and go on to the next.
- This way we can extend the protocol. */
-static void
-stub_is_stopped(int sigval)
-{
- char *ptr = output_buffer;
- unsigned int reg_cont;
-
- /* Send trap type (converted to signal) */
-
- *ptr++ = 'T';
- ptr = hex_byte_pack(ptr, sigval);
-
- if (((reg.exs & 0xff00) >> 8) == 0xc) {
-
- /* Some kind of hardware watchpoint triggered. Find which one
- and determine its type (read/write/access). */
- int S, bp, trig_bits = 0, rw_bits = 0;
- int trig_mask = 0;
- unsigned int *bp_d_regs = &sreg.s3_3;
- /* In a lot of cases, the stopped data address will simply be EDA.
- In some cases, we adjust it to match the watched data range.
- (We don't want to change the actual EDA though). */
- unsigned int stopped_data_address;
- /* The S field of EXS. */
- S = (reg.exs & 0xffff0000) >> 16;
-
- if (S & 1) {
- /* Instruction watchpoint. */
- /* FIXME: Check against, and possibly adjust reported EDA. */
- } else {
- /* Data watchpoint. Find the one that triggered. */
- for (bp = 0; bp < 6; bp++) {
-
- /* Dx_RD, Dx_WR in the S field of EXS for this BP. */
- int bitpos_trig = 1 + bp * 2;
- /* Dx_BPRD, Dx_BPWR in BP_CTRL for this BP. */
- int bitpos_config = 2 + bp * 4;
-
- /* Get read/write trig bits for this BP. */
- trig_bits = (S & (3 << bitpos_trig)) >> bitpos_trig;
-
- /* Read/write config bits for this BP. */
- rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config;
- if (trig_bits) {
- /* Sanity check: the BP shouldn't trigger for accesses
- that it isn't configured for. */
- if ((rw_bits == 0x1 && trig_bits != 0x1) ||
- (rw_bits == 0x2 && trig_bits != 0x2))
- panic("Invalid r/w trigging for this BP");
-
- /* Mark this BP as trigged for future reference. */
- trig_mask |= (1 << bp);
-
- if (reg.eda >= bp_d_regs[bp * 2] &&
- reg.eda <= bp_d_regs[bp * 2 + 1]) {
- /* EDA within range for this BP; it must be the one
- we're looking for. */
- stopped_data_address = reg.eda;
- break;
- }
- }
- }
- if (bp < 6) {
- /* Found a trigged BP with EDA within its configured data range. */
- } else if (trig_mask) {
- /* Something triggered, but EDA doesn't match any BP's range. */
- for (bp = 0; bp < 6; bp++) {
- /* Dx_BPRD, Dx_BPWR in BP_CTRL for this BP. */
- int bitpos_config = 2 + bp * 4;
-
- /* Read/write config bits for this BP (needed later). */
- rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config;
-
- if (trig_mask & (1 << bp)) {
- /* EDA within 31 bytes of the configured start address? */
- if (reg.eda + 31 >= bp_d_regs[bp * 2]) {
- /* Changing the reported address to match
- the start address of the first applicable BP. */
- stopped_data_address = bp_d_regs[bp * 2];
- break;
- } else {
- /* We continue since we might find another useful BP. */
- printk("EDA doesn't match trigged BP's range");
- }
- }
- }
- }
-
- /* No match yet? */
- BUG_ON(bp >= 6);
- /* Note that we report the type according to what the BP is configured
- for (otherwise we'd never report an 'awatch'), not according to how
- it trigged. We did check that the trigged bits match what the BP is
- configured for though. */
- if (rw_bits == 0x1) {
- /* read */
- strncpy(ptr, "rwatch", 6);
- ptr += 6;
- } else if (rw_bits == 0x2) {
- /* write */
- strncpy(ptr, "watch", 5);
- ptr += 5;
- } else if (rw_bits == 0x3) {
- /* access */
- strncpy(ptr, "awatch", 6);
- ptr += 6;
- } else {
- panic("Invalid r/w bits for this BP.");
- }
-
- *ptr++ = ':';
- /* Note that we don't read_register(EDA, ...) */
- ptr = mem2hex_nbo(ptr, (unsigned char *)&stopped_data_address, register_size[EDA]);
- *ptr++ = ';';
- }
- }
- /* Only send PC, frame and stack pointer. */
- read_register(PC, &reg_cont);
- ptr = hex_byte_pack(ptr, PC);
- *ptr++ = ':';
- ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
- *ptr++ = ';';
-
- read_register(R8, &reg_cont);
- ptr = hex_byte_pack(ptr, R8);
- *ptr++ = ':';
- ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
- *ptr++ = ';';
-
- read_register(SP, &reg_cont);
- ptr = hex_byte_pack(ptr, SP);
- *ptr++ = ':';
- ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
- *ptr++ = ';';
-
- /* Send ERP as well; this will save us an entire register fetch in some cases. */
- read_register(ERP, &reg_cont);
- ptr = hex_byte_pack(ptr, ERP);
- *ptr++ = ':';
- ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
- *ptr++ = ';';
-
- /* null-terminate and send it off */
- *ptr = 0;
- putpacket(output_buffer);
-}
-
-/* Returns the size of an instruction that has a delay slot. */
-
-int insn_size(unsigned long pc)
-{
- unsigned short opcode = *(unsigned short *)pc;
- int size = 0;
-
- switch ((opcode & 0x0f00) >> 8) {
- case 0x0:
- case 0x9:
- case 0xb:
- size = 2;
- break;
- case 0xe:
- case 0xf:
- size = 6;
- break;
- case 0xd:
- /* Could be 4 or 6; check more bits. */
- if ((opcode & 0xff) == 0xff)
- size = 4;
- else
- size = 6;
- break;
- default:
- panic("Couldn't find size of opcode 0x%x at 0x%lx\n", opcode, pc);
- }
-
- return size;
-}
-
-void register_fixup(int sigval)
-{
- /* Compensate for ACR push at the beginning of exception handler. */
- reg.sp += 4;
-
- /* Standard case. */
- reg.pc = reg.erp;
- if (reg.erp & 0x1) {
- /* Delay slot bit set. Report as stopped on proper instruction. */
- if (reg.spc) {
- /* Rely on SPC if set. */
- reg.pc = reg.spc;
- } else {
- /* Calculate the PC from the size of the instruction
- that the delay slot we're in belongs to. */
- reg.pc += insn_size(reg.erp & ~1) - 1 ;
- }
- }
-
- if ((reg.exs & 0x3) == 0x0) {
- /* Bits 1 - 0 indicate the type of memory operation performed
- by the interrupted instruction. 0 means no memory operation,
- and EDA is undefined in that case. We zero it to avoid confusion. */
- reg.eda = 0;
- }
-
- if (sigval == SIGTRAP) {
- /* Break 8, single step or hardware breakpoint exception. */
-
- /* Check IDX field of EXS. */
- if (((reg.exs & 0xff00) >> 8) == 0x18) {
-
- /* Break 8. */
-
- /* Static (compiled) breakpoints must return to the next instruction
- in order to avoid infinite loops (default value of ERP). Dynamic
- (gdb-invoked) must subtract the size of the break instruction from
- the ERP so that the instruction that was originally in the break
- instruction's place will be run when we return from the exception. */
- if (!dynamic_bp) {
- /* Assuming that all breakpoints are dynamic from now on. */
- dynamic_bp = 1;
- } else {
-
- /* Only if not in a delay slot. */
- if (!(reg.erp & 0x1)) {
- reg.erp -= 2;
- reg.pc -= 2;
- }
- }
-
- } else if (((reg.exs & 0xff00) >> 8) == 0x3) {
- /* Single step. */
- /* Don't fiddle with S1. */
-
- } else if (((reg.exs & 0xff00) >> 8) == 0xc) {
-
- /* Hardware watchpoint exception. */
-
- /* SPC has been updated so that we will get a single step exception
- when we return, but we don't want that. */
- reg.spc = 0;
-
- /* Don't fiddle with S1. */
- }
-
- } else if (sigval == SIGINT) {
- /* Nothing special. */
- }
-}
-
-static void insert_watchpoint(char type, int addr, int len)
-{
- /* Breakpoint/watchpoint types (GDB terminology):
- 0 = memory breakpoint for instructions
- (not supported; done via memory write instead)
- 1 = hardware breakpoint for instructions (supported)
- 2 = write watchpoint (supported)
- 3 = read watchpoint (supported)
- 4 = access watchpoint (supported) */
-
- if (type < '1' || type > '4') {
- output_buffer[0] = 0;
- return;
- }
-
- /* Read watchpoints are set as access watchpoints, because of GDB's
- inability to deal with pure read watchpoints. */
- if (type == '3')
- type = '4';
-
- if (type == '1') {
- /* Hardware (instruction) breakpoint. */
- /* Bit 0 in BP_CTRL holds the configuration for I0. */
- if (sreg.s0_3 & 0x1) {
- /* Already in use. */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- return;
- }
- /* Configure. */
- sreg.s1_3 = addr;
- sreg.s2_3 = (addr + len - 1);
- sreg.s0_3 |= 1;
- } else {
- int bp;
- unsigned int *bp_d_regs = &sreg.s3_3;
-
- /* The watchpoint allocation scheme is the simplest possible.
- For example, if a region is watched for read and
- a write watch is requested, a new watchpoint will
- be used. Also, if a watch for a region that is already
- covered by one or more existing watchpoints, a new
- watchpoint will be used. */
-
- /* First, find a free data watchpoint. */
- for (bp = 0; bp < 6; bp++) {
- /* Each data watchpoint's control registers occupy 2 bits
- (hence the 3), starting at bit 2 for D0 (hence the 2)
- with 4 bits between for each watchpoint (yes, the 4). */
- if (!(sreg.s0_3 & (0x3 << (2 + (bp * 4))))) {
- break;
- }
- }
-
- if (bp > 5) {
- /* We're out of watchpoints. */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- return;
- }
-
- /* Configure the control register first. */
- if (type == '3' || type == '4') {
- /* Trigger on read. */
- sreg.s0_3 |= (1 << (2 + bp * 4));
- }
- if (type == '2' || type == '4') {
- /* Trigger on write. */
- sreg.s0_3 |= (2 << (2 + bp * 4));
- }
-
- /* Ugly pointer arithmetics to configure the watched range. */
- bp_d_regs[bp * 2] = addr;
- bp_d_regs[bp * 2 + 1] = (addr + len - 1);
- }
-
- /* Set the S1 flag to enable watchpoints. */
- reg.ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
- gdb_cris_strcpy(output_buffer, "OK");
-}
-
-static void remove_watchpoint(char type, int addr, int len)
-{
- /* Breakpoint/watchpoint types:
- 0 = memory breakpoint for instructions
- (not supported; done via memory write instead)
- 1 = hardware breakpoint for instructions (supported)
- 2 = write watchpoint (supported)
- 3 = read watchpoint (supported)
- 4 = access watchpoint (supported) */
- if (type < '1' || type > '4') {
- output_buffer[0] = 0;
- return;
- }
-
- /* Read watchpoints are set as access watchpoints, because of GDB's
- inability to deal with pure read watchpoints. */
- if (type == '3')
- type = '4';
-
- if (type == '1') {
- /* Hardware breakpoint. */
- /* Bit 0 in BP_CTRL holds the configuration for I0. */
- if (!(sreg.s0_3 & 0x1)) {
- /* Not in use. */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- return;
- }
- /* Deconfigure. */
- sreg.s1_3 = 0;
- sreg.s2_3 = 0;
- sreg.s0_3 &= ~1;
- } else {
- int bp;
- unsigned int *bp_d_regs = &sreg.s3_3;
- /* Try to find a watchpoint that is configured for the
- specified range, then check that read/write also matches. */
-
- /* Ugly pointer arithmetic, since I cannot rely on a
- single switch (addr) as there may be several watchpoints with
- the same start address for example. */
-
- for (bp = 0; bp < 6; bp++) {
- if (bp_d_regs[bp * 2] == addr &&
- bp_d_regs[bp * 2 + 1] == (addr + len - 1)) {
- /* Matching range. */
- int bitpos = 2 + bp * 4;
- int rw_bits;
-
- /* Read/write bits for this BP. */
- rw_bits = (sreg.s0_3 & (0x3 << bitpos)) >> bitpos;
-
- if ((type == '3' && rw_bits == 0x1) ||
- (type == '2' && rw_bits == 0x2) ||
- (type == '4' && rw_bits == 0x3)) {
- /* Read/write matched. */
- break;
- }
- }
- }
-
- if (bp > 5) {
- /* No watchpoint matched. */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- return;
- }
-
- /* Found a matching watchpoint. Now, deconfigure it by
- both disabling read/write in bp_ctrl and zeroing its
- start/end addresses. */
- sreg.s0_3 &= ~(3 << (2 + (bp * 4)));
- bp_d_regs[bp * 2] = 0;
- bp_d_regs[bp * 2 + 1] = 0;
- }
-
- /* Note that we don't clear the S1 flag here. It's done when continuing. */
- gdb_cris_strcpy(output_buffer, "OK");
-}
-
-
-
-/* All expected commands are sent from remote.c. Send a response according
- to the description in remote.c. */
-void
-handle_exception(int sigval)
-{
- /* Avoid warning of not used. */
-
- USEDFUN(handle_exception);
- USEDVAR(internal_stack[0]);
-
- register_fixup(sigval);
-
- /* Send response. */
- stub_is_stopped(sigval);
-
- for (;;) {
- output_buffer[0] = '\0';
- getpacket(input_buffer);
- switch (input_buffer[0]) {
- case 'g':
- /* Read registers: g
- Success: Each byte of register data is described by two hex digits.
- Registers are in the internal order for GDB, and the bytes
- in a register are in the same order the machine uses.
- Failure: void. */
- {
- char *buf;
- /* General and special registers. */
- buf = mem2hex(output_buffer, (char *)&reg, sizeof(registers));
- /* Support registers. */
- /* -1 because of the null termination that mem2hex adds. */
- mem2hex(buf,
- (char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)),
- 16 * sizeof(unsigned int));
- break;
- }
- case 'G':
- /* Write registers. GXX..XX
- Each byte of register data is described by two hex digits.
- Success: OK
- Failure: E08. */
- /* General and special registers. */
- if (hex2bin((char *)&reg, &input_buffer[1], sizeof(registers)))
- gdb_cris_strcpy(output_buffer, error_message[E08]);
- /* Support registers. */
- else if (hex2bin((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)),
- &input_buffer[1] + sizeof(registers),
- 16 * sizeof(unsigned int)))
- gdb_cris_strcpy(output_buffer, error_message[E08]);
- else
- gdb_cris_strcpy(output_buffer, "OK");
- break;
-
- case 'P':
- /* Write register. Pn...=r...
- Write register n..., hex value without 0x, with value r...,
- which contains a hex value without 0x and two hex digits
- for each byte in the register (target byte order). P1f=11223344 means
- set register 31 to 44332211.
- Success: OK
- Failure: E02, E05 */
- {
- char *suffix;
- int regno = gdb_cris_strtol(&input_buffer[1], &suffix, 16);
- int status;
-
- status = write_register(regno, suffix+1);
-
- switch (status) {
- case E02:
- /* Do not support read-only registers. */
- gdb_cris_strcpy(output_buffer, error_message[E02]);
- break;
- case E05:
- /* Do not support non-existing registers. */
- gdb_cris_strcpy(output_buffer, error_message[E05]);
- break;
- case E08:
- /* Invalid parameter. */
- gdb_cris_strcpy(output_buffer, error_message[E08]);
- break;
- default:
- /* Valid register number. */
- gdb_cris_strcpy(output_buffer, "OK");
- break;
- }
- }
- break;
-
- case 'm':
- /* Read from memory. mAA..AA,LLLL
- AA..AA is the address and LLLL is the length.
- Success: XX..XX is the memory content. Can be fewer bytes than
- requested if only part of the data may be read. m6000120a,6c means
- retrieve 108 byte from base address 6000120a.
- Failure: void. */
- {
- char *suffix;
- unsigned char *addr = (unsigned char *)gdb_cris_strtol(&input_buffer[1],
- &suffix, 16);
- int len = gdb_cris_strtol(suffix+1, 0, 16);
-
- /* Bogus read (i.e. outside the kernel's
- segment)? . */
- if (!((unsigned int)addr >= 0xc0000000 &&
- (unsigned int)addr < 0xd0000000))
- addr = NULL;
-
- mem2hex(output_buffer, addr, len);
- }
- break;
-
- case 'X':
- /* Write to memory. XAA..AA,LLLL:XX..XX
- AA..AA is the start address, LLLL is the number of bytes, and
- XX..XX is the binary data.
- Success: OK
- Failure: void. */
- case 'M':
- /* Write to memory. MAA..AA,LLLL:XX..XX
- AA..AA is the start address, LLLL is the number of bytes, and
- XX..XX is the hexadecimal data.
- Success: OK
- Failure: E08. */
- {
- char *lenptr;
- char *dataptr;
- unsigned char *addr = (unsigned char *)gdb_cris_strtol(&input_buffer[1],
- &lenptr, 16);
- int len = gdb_cris_strtol(lenptr+1, &dataptr, 16);
- if (*lenptr == ',' && *dataptr == ':') {
- if (input_buffer[0] == 'M') {
- if (hex2bin(addr, dataptr + 1, len))
- gdb_cris_strcpy(output_buffer, error_message[E08]);
- else
- gdb_cris_strcpy(output_buffer, "OK");
- } else /* X */ {
- bin2mem(addr, dataptr + 1, len);
- gdb_cris_strcpy(output_buffer, "OK");
- }
- } else {
- gdb_cris_strcpy(output_buffer, error_message[E06]);
- }
- }
- break;
-
- case 'c':
- /* Continue execution. cAA..AA
- AA..AA is the address where execution is resumed. If AA..AA is
- omitted, resume at the present address.
- Success: return to the executing thread.
- Failure: will never know. */
-
- if (input_buffer[1] != '\0') {
- /* FIXME: Doesn't handle address argument. */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- break;
- }
-
- /* Before continuing, make sure everything is set up correctly. */
-
- /* Set the SPC to some unlikely value. */
- reg.spc = 0;
- /* Set the S1 flag to 0 unless some watchpoint is enabled (since setting
- S1 to 0 would also disable watchpoints). (Note that bits 26-31 in BP_CTRL
- are reserved, so don't check against those). */
- if ((sreg.s0_3 & 0x3fff) == 0) {
- reg.ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT));
- }
-
- return;
-
- case 's':
- /* Step. sAA..AA
- AA..AA is the address where execution is resumed. If AA..AA is
- omitted, resume at the present address. Success: return to the
- executing thread. Failure: will never know. */
-
- if (input_buffer[1] != '\0') {
- /* FIXME: Doesn't handle address argument. */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- break;
- }
-
- /* Set the SPC to PC, which is where we'll return
- (deduced previously). */
- reg.spc = reg.pc;
-
- /* Set the S1 (first stacked, not current) flag, which will
- kick into action when we rfe. */
- reg.ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
- return;
-
- case 'Z':
-
- /* Insert breakpoint or watchpoint, Ztype,addr,length.
- Remote protocol says: A remote target shall return an empty string
- for an unrecognized breakpoint or watchpoint packet type. */
- {
- char *lenptr;
- char *dataptr;
- int addr = gdb_cris_strtol(&input_buffer[3], &lenptr, 16);
- int len = gdb_cris_strtol(lenptr + 1, &dataptr, 16);
- char type = input_buffer[1];
-
- insert_watchpoint(type, addr, len);
- break;
- }
-
- case 'z':
- /* Remove breakpoint or watchpoint, Ztype,addr,length.
- Remote protocol says: A remote target shall return an empty string
- for an unrecognized breakpoint or watchpoint packet type. */
- {
- char *lenptr;
- char *dataptr;
- int addr = gdb_cris_strtol(&input_buffer[3], &lenptr, 16);
- int len = gdb_cris_strtol(lenptr + 1, &dataptr, 16);
- char type = input_buffer[1];
-
- remove_watchpoint(type, addr, len);
- break;
- }
-
-
- case '?':
- /* The last signal which caused a stop. ?
- Success: SAA, where AA is the signal number.
- Failure: void. */
- output_buffer[0] = 'S';
- output_buffer[1] = hex_asc_hi(sigval);
- output_buffer[2] = hex_asc_lo(sigval);
- output_buffer[3] = 0;
- break;
-
- case 'D':
- /* Detach from host. D
- Success: OK, and return to the executing thread.
- Failure: will never know */
- putpacket("OK");
- return;
-
- case 'k':
- case 'r':
- /* kill request or reset request.
- Success: restart of target.
- Failure: will never know. */
- kill_restart();
- break;
-
- case 'C':
- case 'S':
- case '!':
- case 'R':
- case 'd':
- /* Continue with signal sig. Csig;AA..AA
- Step with signal sig. Ssig;AA..AA
- Use the extended remote protocol. !
- Restart the target system. R0
- Toggle debug flag. d
- Search backwards. tAA:PP,MM
- Not supported: E04 */
-
- /* FIXME: What's the difference between not supported
- and ignored (below)? */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- break;
-
- default:
- /* The stub should ignore other request and send an empty
- response ($#<checksum>). This way we can extend the protocol and GDB
- can tell whether the stub it is talking to uses the old or the new. */
- output_buffer[0] = 0;
- break;
- }
- putpacket(output_buffer);
- }
-}
-
-void
-kgdb_init(void)
-{
- reg_intr_vect_rw_mask intr_mask;
- reg_ser_rw_intr_mask ser_intr_mask;
-
- /* Configure the kgdb serial port. */
-#if defined(CONFIG_ETRAX_KGDB_PORT0)
- /* Note: no shortcut registered (not handled by multiple_interrupt).
- See entry.S. */
- set_exception_vector(SER0_INTR_VECT, kgdb_handle_exception);
- /* Enable the ser irq in the global config. */
- intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
- intr_mask.ser0 = 1;
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
-
- ser_intr_mask = REG_RD(ser, regi_ser0, rw_intr_mask);
- ser_intr_mask.dav = regk_ser_yes;
- REG_WR(ser, regi_ser0, rw_intr_mask, ser_intr_mask);
-#elif defined(CONFIG_ETRAX_KGDB_PORT1)
- /* Note: no shortcut registered (not handled by multiple_interrupt).
- See entry.S. */
- set_exception_vector(SER1_INTR_VECT, kgdb_handle_exception);
- /* Enable the ser irq in the global config. */
- intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
- intr_mask.ser1 = 1;
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
-
- ser_intr_mask = REG_RD(ser, regi_ser1, rw_intr_mask);
- ser_intr_mask.dav = regk_ser_yes;
- REG_WR(ser, regi_ser1, rw_intr_mask, ser_intr_mask);
-#elif defined(CONFIG_ETRAX_KGDB_PORT2)
- /* Note: no shortcut registered (not handled by multiple_interrupt).
- See entry.S. */
- set_exception_vector(SER2_INTR_VECT, kgdb_handle_exception);
- /* Enable the ser irq in the global config. */
- intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
- intr_mask.ser2 = 1;
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
-
- ser_intr_mask = REG_RD(ser, regi_ser2, rw_intr_mask);
- ser_intr_mask.dav = regk_ser_yes;
- REG_WR(ser, regi_ser2, rw_intr_mask, ser_intr_mask);
-#elif defined(CONFIG_ETRAX_KGDB_PORT3)
- /* Note: no shortcut registered (not handled by multiple_interrupt).
- See entry.S. */
- set_exception_vector(SER3_INTR_VECT, kgdb_handle_exception);
- /* Enable the ser irq in the global config. */
- intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
- intr_mask.ser3 = 1;
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
-
- ser_intr_mask = REG_RD(ser, regi_ser3, rw_intr_mask);
- ser_intr_mask.dav = regk_ser_yes;
- REG_WR(ser, regi_ser3, rw_intr_mask, ser_intr_mask);
-#endif
-
-}
-/* Performs a complete re-start from scratch. */
-static void
-kill_restart(void)
-{
- machine_restart("");
-}
-
-/* Use this static breakpoint in the start-up only. */
-
-void
-breakpoint(void)
-{
- kgdb_started = 1;
- dynamic_bp = 0; /* This is a static, not a dynamic breakpoint. */
- __asm__ volatile ("break 8"); /* Jump to kgdb_handle_breakpoint. */
-}
-
-/****************************** End of file **********************************/