summaryrefslogtreecommitdiff
path: root/arch/cris/arch-v32/lib/usercopy.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/arch-v32/lib/usercopy.c')
-rw-r--r--arch/cris/arch-v32/lib/usercopy.c458
1 files changed, 0 insertions, 458 deletions
diff --git a/arch/cris/arch-v32/lib/usercopy.c b/arch/cris/arch-v32/lib/usercopy.c
deleted file mode 100644
index 04e78b6ffa22..000000000000
--- a/arch/cris/arch-v32/lib/usercopy.c
+++ /dev/null
@@ -1,458 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * User address space access functions.
- * The non-inlined parts of asm-cris/uaccess.h are here.
- *
- * Copyright (C) 2000, 2003 Axis Communications AB.
- *
- * Written by Hans-Peter Nilsson.
- * Pieces used from memcpy, originally by Kenny Ranerup long time ago.
- */
-
-#include <linux/uaccess.h>
-
-/* Asm:s have been tweaked (within the domain of correctness) to give
- satisfactory results for "gcc version 3.2.1 Axis release R53/1.53-v32".
-
- Check regularly...
-
- Note that for CRISv32, the PC saved at a bus-fault is the address
- *at* the faulting instruction, with a special case for instructions
- in delay slots: then it's the address of the branch. Note also that
- in contrast to v10, a postincrement in the instruction is *not*
- performed at a bus-fault; the register is seen having the original
- value in fault handlers. */
-
-
-/* Copy to userspace. This is based on the memcpy used for
- kernel-to-kernel copying; see "string.c". */
-
-unsigned long __copy_user(void __user *pdst, const void *psrc, unsigned long pn)
-{
- /* We want the parameters put in special registers.
- Make sure the compiler is able to make something useful of this.
- As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
-
- FIXME: Comment for old gcc version. Check.
- If gcc was alright, it really would need no temporaries, and no
- stack space to save stuff on. */
-
- register char *dst __asm__ ("r13") = pdst;
- register const char *src __asm__ ("r11") = psrc;
- register int n __asm__ ("r12") = pn;
- register int retn __asm__ ("r10") = 0;
-
-
- /* When src is aligned but not dst, this makes a few extra needless
- cycles. I believe it would take as many to check that the
- re-alignment was unnecessary. */
- if (((unsigned long) dst & 3) != 0
- /* Don't align if we wouldn't copy more than a few bytes; so we
- don't have to check further for overflows. */
- && n >= 3)
- {
- if ((unsigned long) dst & 1)
- {
- __asm_copy_to_user_1 (dst, src, retn);
- n--;
- }
-
- if ((unsigned long) dst & 2)
- {
- __asm_copy_to_user_2 (dst, src, retn);
- n -= 2;
- }
- }
-
- /* Movem is dirt cheap. The overheap is low enough to always use the
- minimum possible block size as the threshold. */
- if (n >= 44)
- {
- /* For large copies we use 'movem'. */
-
- /* It is not optimal to tell the compiler about clobbering any
- registers; that will move the saving/restoring of those registers
- to the function prologue/epilogue, and make non-movem sizes
- suboptimal. */
- __asm__ volatile ("\
- ;; Check that the register asm declaration got right. \n\
- ;; The GCC manual explicitly says TRT will happen. \n\
- .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\
- .err \n\
- .endif \n\
- \n\
- ;; Save the registers we'll use in the movem process \n\
- ;; on the stack. \n\
- subq 11*4,$sp \n\
- movem $r10,[$sp] \n\
- \n\
- ;; Now we've got this: \n\
- ;; r11 - src \n\
- ;; r13 - dst \n\
- ;; r12 - n \n\
- \n\
- ;; Update n for the first loop \n\
- subq 44,$r12 \n\
-0: \n\
- movem [$r11+],$r10 \n\
- subq 44,$r12 \n\
-1: bge 0b \n\
- movem $r10,[$r13+] \n\
-3: \n\
- addq 44,$r12 ;; compensate for last loop underflowing n \n\
- \n\
- ;; Restore registers from stack \n\
- movem [$sp+],$r10 \n\
-2: \n\
- .section .fixup,\"ax\" \n\
-4: \n\
-; When failing on any of the 1..44 bytes in a chunk, we adjust back the \n\
-; source pointer and just drop through to the by-16 and by-4 loops to \n\
-; get the correct number of failing bytes. This necessarily means a \n\
-; few extra exceptions, but invalid user pointers shouldn't happen in \n\
-; time-critical code anyway. \n\
- jump 3b \n\
- subq 44,$r11 \n\
- \n\
- .previous \n\
- .section __ex_table,\"a\" \n\
- .dword 1b,4b \n\
- .previous"
-
- /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
- /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
-
- }
-
- while (n >= 16)
- {
- __asm_copy_to_user_16 (dst, src, retn);
- n -= 16;
- }
-
- /* Having a separate by-four loops cuts down on cache footprint.
- FIXME: Test with and without; increasing switch to be 0..15. */
- while (n >= 4)
- {
- __asm_copy_to_user_4 (dst, src, retn);
- n -= 4;
- }
-
- switch (n)
- {
- case 0:
- break;
- case 1:
- __asm_copy_to_user_1 (dst, src, retn);
- break;
- case 2:
- __asm_copy_to_user_2 (dst, src, retn);
- break;
- case 3:
- __asm_copy_to_user_3 (dst, src, retn);
- break;
- }
-
- return retn;
-}
-EXPORT_SYMBOL(__copy_user);
-
-/* Copy from user to kernel. The return-value is the number of bytes that were
- inaccessible. */
-unsigned long __copy_user_in(void *pdst, const void __user *psrc,
- unsigned long pn)
-{
- /* We want the parameters put in special registers.
- Make sure the compiler is able to make something useful of this.
- As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
-
- FIXME: Comment for old gcc version. Check.
- If gcc was alright, it really would need no temporaries, and no
- stack space to save stuff on. */
-
- register char *dst __asm__ ("r13") = pdst;
- register const char *src __asm__ ("r11") = psrc;
- register int n __asm__ ("r12") = pn;
- register int retn __asm__ ("r10") = 0;
-
- /* The best reason to align src is that we then know that a read-fault
- was for aligned bytes; there's no 1..3 remaining good bytes to
- pickle. */
- if (((unsigned long) src & 3) != 0)
- {
- if (((unsigned long) src & 1) && n != 0)
- {
- __asm_copy_from_user_1 (dst, src, retn);
- n--;
- if (retn != 0)
- goto exception;
- }
-
- if (((unsigned long) src & 2) && n >= 2)
- {
- __asm_copy_from_user_2 (dst, src, retn);
- n -= 2;
- if (retn != 0)
- goto exception;
- }
-
- }
-
- /* Movem is dirt cheap. The overheap is low enough to always use the
- minimum possible block size as the threshold. */
- if (n >= 44)
- {
- /* It is not optimal to tell the compiler about clobbering any
- registers; that will move the saving/restoring of those registers
- to the function prologue/epilogue, and make non-movem sizes
- suboptimal. */
- __asm__ volatile ("\
- .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\
- .err \n\
- .endif \n\
- \n\
- ;; Save the registers we'll use in the movem process \n\
- ;; on the stack. \n\
- subq 11*4,$sp \n\
- movem $r10,[$sp] \n\
- \n\
- ;; Now we've got this: \n\
- ;; r11 - src \n\
- ;; r13 - dst \n\
- ;; r12 - n \n\
- \n\
- ;; Update n for the first loop \n\
- subq 44,$r12 \n\
-0: \n\
- movem [$r11+],$r10 \n\
- \n\
- subq 44,$r12 \n\
- bge 0b \n\
- movem $r10,[$r13+] \n\
- \n\
-4: \n\
- addq 44,$r12 ;; compensate for last loop underflowing n \n\
- \n\
- ;; Restore registers from stack \n\
- movem [$sp+],$r10 \n\
- .section .fixup,\"ax\" \n\
- \n\
-;; Do not jump back into the loop if we fail. For some uses, we get a \n\
-;; page fault somewhere on the line. Without checking for page limits, \n\
-;; we don't know where, but we need to copy accurately and keep an \n\
-;; accurate count; not just clear the whole line. To do that, we fall \n\
-;; down in the code below, proceeding with smaller amounts. It should \n\
-;; be kept in mind that we have to cater to code like what at one time \n\
-;; was in fs/super.c: \n\
-;; i = size - copy_from_user((void *)page, data, size); \n\
-;; which would cause repeated faults while clearing the remainder of \n\
-;; the SIZE bytes at PAGE after the first fault. \n\
-;; A caveat here is that we must not fall through from a failing page \n\
-;; to a valid page. \n\
- \n\
-3: \n\
- jump 4b ;; Fall through, pretending the fault didn't happen. \n\
- nop \n\
- \n\
- .previous \n\
- .section __ex_table,\"a\" \n\
- .dword 0b,3b \n\
- .previous"
-
- /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
- /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
- }
-
- /* Either we directly start copying here, using dword copying in a loop,
- or we copy as much as possible with 'movem' and then the last block
- (<44 bytes) is copied here. This will work since 'movem' will have
- updated src, dst and n. (Except with failing src.)
-
- Since we want to keep src accurate, we can't use
- __asm_copy_from_user_N with N != (1, 2, 4); it updates dst and
- retn, but not src (by design; it's value is ignored elsewhere). */
-
- while (n >= 4)
- {
- __asm_copy_from_user_4 (dst, src, retn);
- n -= 4;
-
- if (retn)
- goto exception;
- }
-
- /* If we get here, there were no memory read faults. */
- switch (n)
- {
- /* These copies are at least "naturally aligned" (so we don't have
- to check each byte), due to the src alignment code before the
- movem loop. The *_3 case *will* get the correct count for retn. */
- case 0:
- /* This case deliberately left in (if you have doubts check the
- generated assembly code). */
- break;
- case 1:
- __asm_copy_from_user_1 (dst, src, retn);
- break;
- case 2:
- __asm_copy_from_user_2 (dst, src, retn);
- break;
- case 3:
- __asm_copy_from_user_3 (dst, src, retn);
- break;
- }
-
- /* If we get here, retn correctly reflects the number of failing
- bytes. */
- return retn;
-
-exception:
- return retn + n;
-}
-EXPORT_SYMBOL(__copy_user_in);
-
-/* Zero userspace. */
-unsigned long __do_clear_user(void __user *pto, unsigned long pn)
-{
- /* We want the parameters put in special registers.
- Make sure the compiler is able to make something useful of this.
- As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
-
- FIXME: Comment for old gcc version. Check.
- If gcc was alright, it really would need no temporaries, and no
- stack space to save stuff on. */
-
- register char *dst __asm__ ("r13") = pto;
- register int n __asm__ ("r12") = pn;
- register int retn __asm__ ("r10") = 0;
-
-
- if (((unsigned long) dst & 3) != 0
- /* Don't align if we wouldn't copy more than a few bytes. */
- && n >= 3)
- {
- if ((unsigned long) dst & 1)
- {
- __asm_clear_1 (dst, retn);
- n--;
- }
-
- if ((unsigned long) dst & 2)
- {
- __asm_clear_2 (dst, retn);
- n -= 2;
- }
- }
-
- /* Decide which copying method to use.
- FIXME: This number is from the "ordinary" kernel memset. */
- if (n >= 48)
- {
- /* For large clears we use 'movem' */
-
- /* It is not optimal to tell the compiler about clobbering any
- call-saved registers; that will move the saving/restoring of
- those registers to the function prologue/epilogue, and make
- non-movem sizes suboptimal.
-
- This method is not foolproof; it assumes that the "asm reg"
- declarations at the beginning of the function really are used
- here (beware: they may be moved to temporary registers).
- This way, we do not have to save/move the registers around into
- temporaries; we can safely use them straight away.
-
- If you want to check that the allocation was right; then
- check the equalities in the first comment. It should say
- something like "r13=r13, r11=r11, r12=r12". */
- __asm__ volatile ("\
- .ifnc %0%1%2,$r13$r12$r10 \n\
- .err \n\
- .endif \n\
- \n\
- ;; Save the registers we'll clobber in the movem process \n\
- ;; on the stack. Don't mention them to gcc, it will only be \n\
- ;; upset. \n\
- subq 11*4,$sp \n\
- movem $r10,[$sp] \n\
- \n\
- clear.d $r0 \n\
- clear.d $r1 \n\
- clear.d $r2 \n\
- clear.d $r3 \n\
- clear.d $r4 \n\
- clear.d $r5 \n\
- clear.d $r6 \n\
- clear.d $r7 \n\
- clear.d $r8 \n\
- clear.d $r9 \n\
- clear.d $r10 \n\
- clear.d $r11 \n\
- \n\
- ;; Now we've got this: \n\
- ;; r13 - dst \n\
- ;; r12 - n \n\
- \n\
- ;; Update n for the first loop \n\
- subq 12*4,$r12 \n\
-0: \n\
- subq 12*4,$r12 \n\
-1: \n\
- bge 0b \n\
- movem $r11,[$r13+] \n\
- \n\
- addq 12*4,$r12 ;; compensate for last loop underflowing n \n\
- \n\
- ;; Restore registers from stack \n\
- movem [$sp+],$r10 \n\
-2: \n\
- .section .fixup,\"ax\" \n\
-3: \n\
- movem [$sp],$r10 \n\
- addq 12*4,$r10 \n\
- addq 12*4,$r13 \n\
- movem $r10,[$sp] \n\
- jump 0b \n\
- clear.d $r10 \n\
- \n\
- .previous \n\
- .section __ex_table,\"a\" \n\
- .dword 1b,3b \n\
- .previous"
-
- /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn)
- /* Inputs */ : "0" (dst), "1" (n), "2" (retn)
- /* Clobber */ : "r11");
- }
-
- while (n >= 16)
- {
- __asm_clear_16 (dst, retn);
- n -= 16;
- }
-
- /* Having a separate by-four loops cuts down on cache footprint.
- FIXME: Test with and without; increasing switch to be 0..15. */
- while (n >= 4)
- {
- __asm_clear_4 (dst, retn);
- n -= 4;
- }
-
- switch (n)
- {
- case 0:
- break;
- case 1:
- __asm_clear_1 (dst, retn);
- break;
- case 2:
- __asm_clear_2 (dst, retn);
- break;
- case 3:
- __asm_clear_3 (dst, retn);
- break;
- }
-
- return retn;
-}
-EXPORT_SYMBOL(__do_clear_user);