summaryrefslogtreecommitdiff
path: root/arch/frv/kernel/gdb-io.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/frv/kernel/gdb-io.h')
-rw-r--r--arch/frv/kernel/gdb-io.h55
1 files changed, 0 insertions, 55 deletions
diff --git a/arch/frv/kernel/gdb-io.h b/arch/frv/kernel/gdb-io.h
deleted file mode 100644
index 138714bacc40..000000000000
--- a/arch/frv/kernel/gdb-io.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* gdb-io.h: FR403 GDB I/O port defs
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _GDB_IO_H
-#define _GDB_IO_H
-
-#include <asm/serial-regs.h>
-
-#undef UART_RX
-#undef UART_TX
-#undef UART_DLL
-#undef UART_DLM
-#undef UART_IER
-#undef UART_IIR
-#undef UART_FCR
-#undef UART_LCR
-#undef UART_MCR
-#undef UART_LSR
-#undef UART_MSR
-#undef UART_SCR
-
-#define UART_RX 0*8 /* In: Receive buffer (DLAB=0) */
-#define UART_TX 0*8 /* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL 0*8 /* Out: Divisor Latch Low (DLAB=1) */
-#define UART_DLM 1*8 /* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER 1*8 /* Out: Interrupt Enable Register */
-#define UART_IIR 2*8 /* In: Interrupt ID Register */
-#define UART_FCR 2*8 /* Out: FIFO Control Register */
-#define UART_LCR 3*8 /* Out: Line Control Register */
-#define UART_MCR 4*8 /* Out: Modem Control Register */
-#define UART_LSR 5*8 /* In: Line Status Register */
-#define UART_MSR 6*8 /* In: Modem Status Register */
-#define UART_SCR 7*8 /* I/O: Scratch Register */
-
-#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-#define UART_LCR_SBC 0x40 /* Set break control */
-#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
-#define UART_LCR_EPAR 0x10 /* Even parity select */
-#define UART_LCR_PARITY 0x08 /* Parity Enable */
-#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
-#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
-#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
-#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-
-
-#endif /* _GDB_IO_H */