summaryrefslogtreecommitdiff
path: root/arch/i386/kernel/quirks.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/quirks.c')
-rw-r--r--arch/i386/kernel/quirks.c69
1 files changed, 59 insertions, 10 deletions
diff --git a/arch/i386/kernel/quirks.c b/arch/i386/kernel/quirks.c
index 9f6ab1789bb0..34874c398b44 100644
--- a/arch/i386/kernel/quirks.c
+++ b/arch/i386/kernel/quirks.c
@@ -3,10 +3,12 @@
*/
#include <linux/pci.h>
#include <linux/irq.h>
+#include <asm/pci-direct.h>
+#include <asm/genapic.h>
+#include <asm/cpu.h>
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
-
-static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
+static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev)
{
u8 config, rev;
u32 word;
@@ -14,14 +16,12 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
/* BIOS may enable hardware IRQ balancing for
* E7520/E7320/E7525(revision ID 0x9 and below)
* based platforms.
- * Disable SW irqbalance/affinity on those platforms.
+ * For those platforms, make sure that the genapic is set to 'flat'
*/
pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
if (rev > 0x9)
return;
- printk(KERN_INFO "Intel E7520/7320/7525 detected.");
-
/* enable access to config space*/
pci_read_config_byte(dev, 0xf4, &config);
pci_write_config_byte(dev, 0xf4, config|0x2);
@@ -30,6 +30,44 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
if (!(word & (1 << 13))) {
+#ifdef CONFIG_X86_64
+ if (genapic != &apic_flat)
+ panic("APIC mode must be flat on this system\n");
+#elif defined(CONFIG_X86_GENERICARCH)
+ if (genapic != &apic_default)
+ panic("APIC mode must be default(flat) on this system. Use apic=default\n");
+#endif
+ }
+
+ /* put back the original value for config space*/
+ if (!(config & 0x2))
+ pci_write_config_byte(dev, 0xf4, config);
+}
+
+void __init quirk_intel_irqbalance(void)
+{
+ u8 config, rev;
+ u32 word;
+
+ /* BIOS may enable hardware IRQ balancing for
+ * E7520/E7320/E7525(revision ID 0x9 and below)
+ * based platforms.
+ * Disable SW irqbalance/affinity on those platforms.
+ */
+ rev = read_pci_config_byte(0, 0, 0, PCI_CLASS_REVISION);
+ if (rev > 0x9)
+ return;
+
+ printk(KERN_INFO "Intel E7520/7320/7525 detected.");
+
+ /* enable access to config space */
+ config = read_pci_config_byte(0, 0, 0, 0xf4);
+ write_pci_config_byte(0, 0, 0, 0xf4, config|0x2);
+
+ /* read xTPR register */
+ word = read_pci_config_16(0, 0, 0x40, 0x4c);
+
+ if (!(word & (1 << 13))) {
printk(KERN_INFO "Disabling irq balancing and affinity\n");
#ifdef CONFIG_IRQBALANCE
irqbalance_disable("");
@@ -38,13 +76,24 @@ static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
#ifdef CONFIG_PROC_FS
no_irq_affinity = 1;
#endif
+#ifdef CONFIG_HOTPLUG_CPU
+ printk(KERN_INFO "Disabling cpu hotplug control\n");
+ enable_cpu_hotplug = 0;
+#endif
+#ifdef CONFIG_X86_64
+ /* force the genapic selection to flat mode so that
+ * interrupts can be redirected to more than one CPU.
+ */
+ genapic_force = &apic_flat;
+#endif
}
- /* put back the original value for config space*/
+ /* put back the original value for config space */
if (!(config & 0x2))
- pci_write_config_byte(dev, 0xf4, config);
+ write_pci_config_byte(0, 0, 0, 0xf4, config);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, verify_quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, verify_quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, verify_quirk_intel_irqbalance);
+
#endif