summaryrefslogtreecommitdiff
path: root/arch/mn10300/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mn10300/Kconfig')
-rw-r--r--arch/mn10300/Kconfig499
1 files changed, 0 insertions, 499 deletions
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
deleted file mode 100644
index e9d8d60bd28b..000000000000
--- a/arch/mn10300/Kconfig
+++ /dev/null
@@ -1,499 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config MN10300
- def_bool y
- select HAVE_EXIT_THREAD
- select HAVE_OPROFILE
- select HAVE_UID16
- select GENERIC_IRQ_SHOW
- select ARCH_WANT_IPC_PARSE_VERSION
- select HAVE_ARCH_TRACEHOOK
- select HAVE_ARCH_KGDB
- select GENERIC_ATOMIC64
- select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
- select VIRT_TO_BUS
- select GENERIC_CLOCKEVENTS
- select MODULES_USE_ELF_RELA
- select OLD_SIGSUSPEND3
- select OLD_SIGACTION
- select HAVE_DEBUG_STACKOVERFLOW
- select ARCH_NO_COHERENT_DMA_MMAP
-
-config AM33_2
- def_bool n
-
-config AM33_3
- def_bool n
-
-config AM34_2
- def_bool n
- select MN10300_HAS_ATOMIC_OPS_UNIT
- select MN10300_HAS_CACHE_SNOOP
-
-config ERRATUM_NEED_TO_RELOAD_MMUCTR
- def_bool y if AM33_3 || AM34_2
-
-config MMU
- def_bool y
-
-config HIGHMEM
- def_bool n
-
-config NUMA
- def_bool n
-
-config RWSEM_GENERIC_SPINLOCK
- def_bool y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
-
-config GENERIC_CALIBRATE_DELAY
- def_bool y
-
-config GENERIC_HWEIGHT
- def_bool y
-
-config GENERIC_BUG
- def_bool y
- depends on BUG
-
-config QUICKLIST
- def_bool y
-
-config ARCH_HAS_ILOG2_U32
- def_bool y
-
-config HOTPLUG_CPU
- def_bool n
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-
-menu "Panasonic MN10300 system setup"
-
-choice
- prompt "Unit type"
- default MN10300_UNIT_ASB2303
- help
- This option specifies board for which the kernel will be
- compiled. It affects the external peripherals catered for.
-
-config MN10300_UNIT_ASB2303
- bool "ASB2303"
-
-config MN10300_UNIT_ASB2305
- bool "ASB2305"
-
-config MN10300_UNIT_ASB2364
- bool "ASB2364"
- select SMSC911X_ARCH_HOOKS if SMSC911X
-
-endchoice
-
-choice
- prompt "Processor support"
- default MN10300_PROC_MN103E010
- help
- This option specifies the processor for which the kernel will be
- compiled. It affects the on-chip peripherals catered for.
-
-config MN10300_PROC_MN103E010
- bool "MN103E010"
- depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
- select AM33_2
- select MN10300_PROC_HAS_TTYSM0
- select MN10300_PROC_HAS_TTYSM1
- select MN10300_PROC_HAS_TTYSM2
-
-config MN10300_PROC_MN2WS0050
- bool "MN2WS0050"
- depends on MN10300_UNIT_ASB2364
- select AM34_2
- select MN10300_PROC_HAS_TTYSM0
- select MN10300_PROC_HAS_TTYSM1
- select MN10300_PROC_HAS_TTYSM2
-
-endchoice
-
-config MN10300_HAS_ATOMIC_OPS_UNIT
- def_bool n
- help
- This should be enabled if the processor has an atomic ops unit
- capable of doing LL/SC equivalent operations.
-
-config FPU
- bool "FPU present"
- default y
- depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
-
-config LAZY_SAVE_FPU
- bool "Save FPU state lazily"
- default y
- depends on FPU && !SMP
- help
- Enable this to be lazy in the saving of the FPU state to the owning
- task's thread struct. This is useful if most tasks on the system
- don't use the FPU as only those tasks that use it will pass it
- between them, and the state needn't be saved for a task that isn't
- using it.
-
- This can't be so easily used on SMP as the process that owns the FPU
- state on a CPU may be currently running on another CPU, so for the
- moment, it is disabled.
-
-source "arch/mn10300/mm/Kconfig.cache"
-
-config MN10300_TLB_USE_PIDR
- def_bool y
-
-menu "Memory layout options"
-
-config KERNEL_RAM_BASE_ADDRESS
- hex "Base address of kernel RAM"
- default "0x90000000"
-
-config INTERRUPT_VECTOR_BASE
- hex "Base address of vector table"
- default "0x90000000"
- help
- The base address of the vector table will be programmed into
- the TBR register. It must be on 16MiB address boundary.
-
-config KERNEL_TEXT_ADDRESS
- hex "Base address of kernel"
- default "0x90001000"
-
-config KERNEL_ZIMAGE_BASE_ADDRESS
- hex "Base address of compressed vmlinux image"
- default "0x50700000"
-
-config BOOT_STACK_OFFSET
- hex
- default "0xF00" if SMP
- default "0xFF0" if !SMP
-
-config BOOT_STACK_SIZE
- hex
- depends on SMP
- default "0x100"
-endmenu
-
-config SMP
- bool "Symmetric multi-processing support"
- default y
- depends on MN10300_PROC_MN2WS0050
- ---help---
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, say N. If you have a system with more
- than one CPU, say Y.
-
- If you say N here, the kernel will run on uni- and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- uniprocessor machines. On a uniprocessor machine, the kernel
- will run faster if you say N here.
-
- See also <file:Documentation/x86/i386/IO-APIC.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
- <http://www.tldp.org/docs.html#howto>.
-
- If you don't know what to do here, say N.
-
-config NR_CPUS
- int
- depends on SMP
- default "2"
-
-source "kernel/Kconfig.preempt"
-
-config MN10300_CURRENT_IN_E2
- bool "Hold current task address in E2 register"
- depends on !SMP
- default y
- help
- This option removes the E2/R2 register from the set available to gcc
- for normal use and instead uses it to store the address of the
- current process's task_struct whilst in the kernel.
-
- This means the kernel doesn't need to calculate the address each time
- "current" is used (take SP, AND with mask and dereference pointer
- just to get the address), and instead can just use E2+offset
- addressing each time.
-
- This has no effect on userspace.
-
-config MN10300_USING_JTAG
- bool "Using JTAG to debug kernel"
- default y
- help
- This options indicates that JTAG will be used to debug the kernel. It
- suppresses the use of certain hardware debugging features, such as
- single-stepping, which are taken over completely by the JTAG unit.
-
-source "kernel/Kconfig.hz"
-
-config MN10300_RTC
- bool "Using MN10300 RTC"
- depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
- select RTC_CLASS
- select RTC_DRV_CMOS
- select RTC_SYSTOHC
- default n
- help
- This option enables support for the RTC, thus enabling time to be
- tracked, even when system is powered down. This is available on-chip
- on the MN103E010.
-
-config MN10300_WD_TIMER
- bool "Using MN10300 watchdog timer"
- default y
- help
- This options indicates that the watchdog timer will be used.
-
-config PCI
- bool "Use PCI"
- depends on MN10300_UNIT_ASB2305
- default y
- select GENERIC_PCI_IOMAP
- help
- Some systems (such as the ASB2305) have PCI onboard. If you have one
- of these boards and you wish to use the PCI facilities, say Y here.
-
- The PCI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, contains valuable
- information about which PCI hardware does work under Linux and which
- doesn't.
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-menu "MN10300 internal serial options"
-
-config MN10300_PROC_HAS_TTYSM0
- bool
- default n
-
-config MN10300_PROC_HAS_TTYSM1
- bool
- default n
-
-config MN10300_PROC_HAS_TTYSM2
- bool
- default n
-
-config MN10300_TTYSM
- bool "Support for ttySM serial ports"
- depends on MN10300
- default y
- select SERIAL_CORE
- help
- This option enables support for the on-chip serial ports that the
- MN10300 has available.
-
-config MN10300_TTYSM_CONSOLE
- bool "Support for console on ttySM serial ports"
- depends on MN10300_TTYSM
- select SERIAL_CORE_CONSOLE
- help
- This option enables support for a console on the on-chip serial ports
- that the MN10300 has available.
-
-#
-# /dev/ttySM0
-#
-config MN10300_TTYSM0
- bool "Enable SIF0 (/dev/ttySM0)"
- depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0
- help
- Enable access to SIF0 through /dev/ttySM0 or gdb-stub
-
-choice
- prompt "Select the timer to supply the clock for SIF0"
- default MN10300_TTYSM0_TIMER8
- depends on MN10300_TTYSM0
-
-config MN10300_TTYSM0_TIMER8
- bool "Use timer 8 (16-bit)"
-
-config MN10300_TTYSM0_TIMER2
- bool "Use timer 2 (8-bit)"
-
-endchoice
-
-#
-# /dev/ttySM1
-#
-config MN10300_TTYSM1
- bool "Enable SIF1 (/dev/ttySM1)"
- depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1
- help
- Enable access to SIF1 through /dev/ttySM1 or gdb-stub
-
-choice
- prompt "Select the timer to supply the clock for SIF1"
- default MN10300_TTYSM1_TIMER12 \
- if !(AM33_2 || AM33_3)
- default MN10300_TTYSM1_TIMER9 \
- if AM33_2 || AM33_3
- depends on MN10300_TTYSM1
-
-config MN10300_TTYSM1_TIMER12
- bool "Use timer 12 (16-bit)"
- depends on !(AM33_2 || AM33_3)
-
-config MN10300_TTYSM1_TIMER9
- bool "Use timer 9 (16-bit)"
- depends on AM33_2 || AM33_3
-
-config MN10300_TTYSM1_TIMER3
- bool "Use timer 3 (8-bit)"
- depends on AM33_2 || AM33_3
-
-endchoice
-
-#
-# /dev/ttySM2
-#
-config MN10300_TTYSM2
- bool "Enable SIF2 (/dev/ttySM2)"
- depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2
- help
- Enable access to SIF2 through /dev/ttySM2 or gdb-stub
-
-choice
- prompt "Select the timer to supply the clock for SIF2"
- default MN10300_TTYSM2_TIMER3 \
- if !(AM33_2 || AM33_3)
- default MN10300_TTYSM2_TIMER10 \
- if AM33_2 || AM33_3
- depends on MN10300_TTYSM2
-
-config MN10300_TTYSM2_TIMER9
- bool "Use timer 9 (16-bit)"
- depends on !(AM33_2 || AM33_3)
-
-config MN10300_TTYSM2_TIMER1
- bool "Use timer 1 (8-bit)"
- depends on !(AM33_2 || AM33_3)
-
-config MN10300_TTYSM2_TIMER3
- bool "Use timer 3 (8-bit)"
- depends on !(AM33_2 || AM33_3)
-
-config MN10300_TTYSM2_TIMER10
- bool "Use timer 10 (16-bit)"
- depends on AM33_2 || AM33_3
-
-endchoice
-
-config MN10300_TTYSM2_CTS
- bool "Enable the use of the CTS line /dev/ttySM2"
- depends on MN10300_TTYSM2 && AM33_2
-
-endmenu
-
-menu "Interrupt request priority options"
-
-comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)"
-
-comment "____Non-maskable interrupt levels____"
-comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial"
-
-config DEBUGGER_IRQ_LEVEL
- int "DEBUGGER interrupt priority"
- depends on KERNEL_DEBUGGER
- range 0 1 if LINUX_CLI_LEVEL = 2
- range 0 2 if LINUX_CLI_LEVEL = 3
- range 0 3 if LINUX_CLI_LEVEL = 4
- range 0 4 if LINUX_CLI_LEVEL = 5
- range 0 5 if LINUX_CLI_LEVEL = 6
- default 0
-
-comment "The following must be set to a higher priority than local_irq_disable()"
-
-config MN10300_SERIAL_IRQ_LEVEL
- int "MN10300 on-chip serial interrupt priority"
- depends on MN10300_TTYSM
- range 1 1 if LINUX_CLI_LEVEL = 2
- range 1 2 if LINUX_CLI_LEVEL = 3
- range 1 3 if LINUX_CLI_LEVEL = 4
- range 1 4 if LINUX_CLI_LEVEL = 5
- range 1 5 if LINUX_CLI_LEVEL = 6
- default 1
-
-comment "-"
-comment "____Maskable interrupt levels____"
-
-config LINUX_CLI_LEVEL
- int "The highest interrupt priority excluded by local_irq_disable() (2-6)"
- range 2 6
- default 2
- help
- local_irq_disable() doesn't actually disable maskable interrupts -
- what it does is restrict the levels of interrupt which are permitted
- (a lower level indicates a higher priority) by lowering the value in
- EPSW.IM from 7. Any interrupt is permitted for which the level is
- lower than EPSW.IM.
-
- Certain interrupts, such as DEBUGGER and virtual MN10300 on-chip
- serial DMA interrupts are allowed to interrupt normal disabled
- sections.
-
-comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL"
-
-config TIMER_IRQ_LEVEL
- int "Kernel timer interrupt priority"
- range LINUX_CLI_LEVEL 6
- default 4
-
-config PCI_IRQ_LEVEL
- int "PCI interrupt priority"
- depends on PCI
- range LINUX_CLI_LEVEL 6
- default 5
-
-config ETHERNET_IRQ_LEVEL
- int "Ethernet interrupt priority"
- depends on SMC91X || SMC911X || SMSC911X
- range LINUX_CLI_LEVEL 6
- default 6
-
-config EXT_SERIAL_IRQ_LEVEL
- int "External serial port interrupt priority"
- depends on SERIAL_8250
- range LINUX_CLI_LEVEL 6
- default 6
-
-endmenu
-
-source "mm/Kconfig"
-
-menu "Power management options"
-source kernel/power/Kconfig
-endmenu
-
-endmenu
-
-
-menu "Executable formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/mn10300/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"