diff options
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64s.S')
| -rw-r--r-- | arch/powerpc/kernel/exceptions-64s.S | 581 |
1 files changed, 266 insertions, 315 deletions
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 3afd3915921a..02eab0fa3d74 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -132,12 +132,12 @@ BEGIN_FTR_SECTION #endif beq cr1,2f - b .power7_wakeup_noloss -2: b .power7_wakeup_loss + b power7_wakeup_noloss +2: b power7_wakeup_loss /* Fast Sleep wakeup on PowerNV */ 8: GET_PACA(r13) - b .power7_wakeup_tb_loss + b power7_wakeup_tb_loss 9: END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) @@ -211,16 +211,16 @@ data_access_slb_pSeries: #endif /* __DISABLED__ */ mfspr r12,SPRN_SRR1 #ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode + b slb_miss_realmode #else /* - * We can't just use a direct branch to .slb_miss_realmode + * We can't just use a direct branch to slb_miss_realmode * because the distance from here to there depends on where * the kernel ends up being put. */ mfctr r11 ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) + LOAD_HANDLER(r10, slb_miss_realmode) mtctr r10 bctr #endif @@ -243,11 +243,11 @@ instruction_access_slb_pSeries: #endif /* __DISABLED__ */ mfspr r12,SPRN_SRR1 #ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode + b slb_miss_realmode #else mfctr r11 ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) + LOAD_HANDLER(r10, slb_miss_realmode) mtctr r10 bctr #endif @@ -524,7 +524,7 @@ do_stab_bolted_pSeries: std r12,PACA_EXSLB+EX_R12(r13) GET_SCRATCH0(r10) std r10,PACA_EXSLB+EX_R13(r13) - EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD) + EXCEPTION_PROLOG_PSERIES_1(do_stab_bolted, EXC_STD) KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300) KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380) @@ -533,70 +533,6 @@ do_stab_bolted_pSeries: KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x900) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x982) -#ifdef CONFIG_PPC_DENORMALISATION -denorm_assist: -BEGIN_FTR_SECTION -/* - * To denormalise we need to move a copy of the register to itself. - * For POWER6 do that here for all FP regs. - */ - mfmsr r10 - ori r10,r10,(MSR_FP|MSR_FE0|MSR_FE1) - xori r10,r10,(MSR_FE0|MSR_FE1) - mtmsrd r10 - sync - -#define FMR2(n) fmr (n), (n) ; fmr n+1, n+1 -#define FMR4(n) FMR2(n) ; FMR2(n+2) -#define FMR8(n) FMR4(n) ; FMR4(n+4) -#define FMR16(n) FMR8(n) ; FMR8(n+8) -#define FMR32(n) FMR16(n) ; FMR16(n+16) - FMR32(0) - -FTR_SECTION_ELSE -/* - * To denormalise we need to move a copy of the register to itself. - * For POWER7 do that here for the first 32 VSX registers only. - */ - mfmsr r10 - oris r10,r10,MSR_VSX@h - mtmsrd r10 - sync - -#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1) -#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2) -#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4) -#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8) -#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16) - XVCPSGNDP32(0) - -ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) - -BEGIN_FTR_SECTION - b denorm_done -END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) -/* - * To denormalise we need to move a copy of the register to itself. - * For POWER8 we need to do that for all 64 VSX registers - */ - XVCPSGNDP32(32) -denorm_done: - mtspr SPRN_HSRR0,r11 - mtcrf 0x80,r9 - ld r9,PACA_EXGEN+EX_R9(r13) - RESTORE_PPR_PACA(PACA_EXGEN, r10) -BEGIN_FTR_SECTION - ld r10,PACA_EXGEN+EX_CFAR(r13) - mtspr SPRN_CFAR,r10 -END_FTR_SECTION_IFSET(CPU_FTR_CFAR) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - HRFID - b . -#endif - .align 7 /* moved from 0xe00 */ STD_EXCEPTION_HV_OOL(0xe02, h_data_storage) @@ -623,43 +559,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xf82) /* - * An interrupt came in while soft-disabled. We set paca->irq_happened, then: - * - If it was a decrementer interrupt, we bump the dec to max and and return. - * - If it was a doorbell we return immediately since doorbells are edge - * triggered and won't automatically refire. - * - else we hard disable and return. - * This is called with r10 containing the value to OR to the paca field. - */ -#define MASKED_INTERRUPT(_H) \ -masked_##_H##interrupt: \ - std r11,PACA_EXGEN+EX_R11(r13); \ - lbz r11,PACAIRQHAPPENED(r13); \ - or r11,r11,r10; \ - stb r11,PACAIRQHAPPENED(r13); \ - cmpwi r10,PACA_IRQ_DEC; \ - bne 1f; \ - lis r10,0x7fff; \ - ori r10,r10,0xffff; \ - mtspr SPRN_DEC,r10; \ - b 2f; \ -1: cmpwi r10,PACA_IRQ_DBELL; \ - beq 2f; \ - mfspr r10,SPRN_##_H##SRR1; \ - rldicl r10,r10,48,1; /* clear MSR_EE */ \ - rotldi r10,r10,16; \ - mtspr SPRN_##_H##SRR1,r10; \ -2: mtcrf 0x80,r9; \ - ld r9,PACA_EXGEN+EX_R9(r13); \ - ld r10,PACA_EXGEN+EX_R10(r13); \ - ld r11,PACA_EXGEN+EX_R11(r13); \ - GET_SCRATCH0(r13); \ - ##_H##rfid; \ - b . - - MASKED_INTERRUPT() - MASKED_INTERRUPT(H) - -/* * Called from arch_local_irq_enable when an interrupt needs * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate * which kind of interrupt. MSR:EE is already off. We generate a @@ -759,50 +658,6 @@ kvmppc_skip_Hinterrupt: b . #endif -/* - * Code from here down to __end_handlers is invoked from the - * exception prologs above. Because the prologs assemble the - * addresses of these handlers using the LOAD_HANDLER macro, - * which uses an ori instruction, these handlers must be in - * the first 64k of the kernel image. - */ - -/*** Common interrupt handlers ***/ - - STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) - - STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) - STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) - STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) -#ifdef CONFIG_PPC_DOORBELL - STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .doorbell_exception) -#else - STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .unknown_exception) -#endif - STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) - STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) - STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt) - STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception) -#ifdef CONFIG_PPC_DOORBELL - STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception) -#else - STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .unknown_exception) -#endif - STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception) - STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) - STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception) -#ifdef CONFIG_ALTIVEC - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) -#else - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception) -#endif -#ifdef CONFIG_CBE_RAS - STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception) - STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception) - STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception) -#endif /* CONFIG_CBE_RAS */ - /* * Relocation-on interrupts: A subset of the interrupts can be delivered * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering @@ -829,16 +684,16 @@ data_access_slb_relon_pSeries: mfspr r3,SPRN_DAR mfspr r12,SPRN_SRR1 #ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode + b slb_miss_realmode #else /* - * We can't just use a direct branch to .slb_miss_realmode + * We can't just use a direct branch to slb_miss_realmode * because the distance from here to there depends on where * the kernel ends up being put. */ mfctr r11 ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) + LOAD_HANDLER(r10, slb_miss_realmode) mtctr r10 bctr #endif @@ -854,11 +709,11 @@ instruction_access_slb_relon_pSeries: mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ mfspr r12,SPRN_SRR1 #ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode + b slb_miss_realmode #else mfctr r11 ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) + LOAD_HANDLER(r10, slb_miss_realmode) mtctr r10 bctr #endif @@ -949,6 +804,17 @@ hv_facility_unavailable_relon_trampoline: #endif STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist) + /* Equivalents to the above handlers for relocation-on interrupt vectors */ + STD_RELON_EXCEPTION_HV_OOL(0xe40, emulation_assist) + MASKABLE_RELON_EXCEPTION_HV_OOL(0xe80, h_doorbell) + + STD_RELON_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor) + STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable) + STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable) + STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable) + STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable) + + /* Other future vectors */ .align 7 .globl __end_interrupts @@ -966,7 +832,7 @@ system_call_entry: b system_call_common ppc64_runlatch_on_trampoline: - b .__ppc64_runlatch_on + b __ppc64_runlatch_on /* * Here we have detected that the kernel stack pointer is bad. @@ -1025,14 +891,186 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) std r12,RESULT(r1) std r11,STACK_FRAME_OVERHEAD-16(r1) 1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_bad_stack + bl kernel_bad_stack b 1b + +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* - * Here r13 points to the paca, r9 contains the saved CR, - * SRR0 and SRR1 are saved in r11 and r12, - * r9 - r13 are saved in paca->exgen. + * Data area reserved for FWNMI option. + * This address (0x7000) is fixed by the RPA. */ + .= 0x7000 + .globl fwnmi_data_area +fwnmi_data_area: + + /* pseries and powernv need to keep the whole page from + * 0x7000 to 0x8000 free for use by the firmware + */ + . = 0x8000 +#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ + +/* + * Denorm interrupt assist moved out of line to here, where it remains + * close enough to the call site which uses a small conditional branch + */ +#ifdef CONFIG_PPC_DENORMALISATION +denorm_assist: +BEGIN_FTR_SECTION +/* + * To denormalise we need to move a copy of the register to itself. + * For POWER6 do that here for all FP regs. + */ + mfmsr r10 + ori r10,r10,(MSR_FP|MSR_FE0|MSR_FE1) + xori r10,r10,(MSR_FE0|MSR_FE1) + mtmsrd r10 + sync + +#define FMR2(n) fmr (n), (n) ; fmr n+1, n+1 +#define FMR4(n) FMR2(n) ; FMR2(n+2) +#define FMR8(n) FMR4(n) ; FMR4(n+4) +#define FMR16(n) FMR8(n) ; FMR8(n+8) +#define FMR32(n) FMR16(n) ; FMR16(n+16) + FMR32(0) + +FTR_SECTION_ELSE +/* + * To denormalise we need to move a copy of the register to itself. + * For POWER7 do that here for the first 32 VSX registers only. + */ + mfmsr r10 + oris r10,r10,MSR_VSX@h + mtmsrd r10 + sync + +#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1) +#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2) +#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4) +#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8) +#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16) + XVCPSGNDP32(0) + +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) + +BEGIN_FTR_SECTION + b denorm_done +END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) +/* + * To denormalise we need to move a copy of the register to itself. + * For POWER8 we need to do that for all 64 VSX registers + */ + XVCPSGNDP32(32) +denorm_done: + mtspr SPRN_HSRR0,r11 + mtcrf 0x80,r9 + ld r9,PACA_EXGEN+EX_R9(r13) + RESTORE_PPR_PACA(PACA_EXGEN, r10) +BEGIN_FTR_SECTION + ld r10,PACA_EXGEN+EX_CFAR(r13) + mtspr SPRN_CFAR,r10 +END_FTR_SECTION_IFSET(CPU_FTR_CFAR) + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) + ld r13,PACA_EXGEN+EX_R13(r13) + HRFID + b . +#endif + +/* + * An interrupt came in while soft-disabled. We set paca->irq_happened, then: + * - If it was a decrementer interrupt, we bump the dec to max and and return. + * - If it was a doorbell we return immediately since doorbells are edge + * triggered and won't automatically refire. + * - else we hard disable and return. + * This is called with r10 containing the value to OR to the paca field. + * + * Warning: This code is reached using a (small) conditional branch from both + * the 1st level exception handlers below 0x8000 and the alternate feature + * sections of that file which the linker puts right after the text in here. + * + * For that to work, we thus need this code to be roughly near the "middle" + * so that we can reach it with <32k offsets. Here works... for now. + */ +#define MASKED_INTERRUPT(_H) \ +masked_##_H##interrupt: \ + std r11,PACA_EXGEN+EX_R11(r13); \ + lbz r11,PACAIRQHAPPENED(r13); \ + or r11,r11,r10; \ + stb r11,PACAIRQHAPPENED(r13); \ + cmpwi r10,PACA_IRQ_DEC; \ + bne 1f; \ + lis r10,0x7fff; \ + ori r10,r10,0xffff; \ + mtspr SPRN_DEC,r10; \ + b 2f; \ +1: cmpwi r10,PACA_IRQ_DBELL; \ + beq 2f; \ + mfspr r10,SPRN_##_H##SRR1; \ + rldicl r10,r10,48,1; /* clear MSR_EE */ \ + rotldi r10,r10,16; \ + mtspr SPRN_##_H##SRR1,r10; \ +2: mtcrf 0x80,r9; \ + ld r9,PACA_EXGEN+EX_R9(r13); \ + ld r10,PACA_EXGEN+EX_R10(r13); \ + ld r11,PACA_EXGEN+EX_R11(r13); \ + GET_SCRATCH0(r13); \ + ##_H##rfid; \ + b . + + MASKED_INTERRUPT() + MASKED_INTERRUPT(H) + +/* + * Code from here down to __end_handlers is invoked from the + * exception prologs above. Because the prologs assemble the + * addresses of these handlers using the LOAD_HANDLER macro, + * which uses an ori instruction, these handlers must be in + * the first 64k of the kernel image. + */ + +/*** Common interrupt handlers ***/ + + STD_EXCEPTION_COMMON(0x100, system_reset, system_reset_exception) + + STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) + STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, timer_interrupt) + STD_EXCEPTION_COMMON(0x980, hdecrementer, hdec_interrupt) +#ifdef CONFIG_PPC_DOORBELL + STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, doorbell_exception) +#else + STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, unknown_exception) +#endif + STD_EXCEPTION_COMMON(0xb00, trap_0b, unknown_exception) + STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception) + STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception) + STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt) + STD_EXCEPTION_COMMON(0xe60, hmi_exception, unknown_exception) +#ifdef CONFIG_PPC_DOORBELL + STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception) +#else + STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, unknown_exception) +#endif + STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, performance_monitor_exception) + STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, instruction_breakpoint_exception) + STD_EXCEPTION_COMMON(0x1502, denorm, unknown_exception) +#ifdef CONFIG_ALTIVEC + STD_EXCEPTION_COMMON(0x1700, altivec_assist, altivec_assist_exception) +#else + STD_EXCEPTION_COMMON(0x1700, altivec_assist, unknown_exception) +#endif +#ifdef CONFIG_CBE_RAS + STD_EXCEPTION_COMMON(0x1200, cbe_system_error, cbe_system_error_exception) + STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, cbe_maintenance_exception) + STD_EXCEPTION_COMMON(0x1800, cbe_thermal, cbe_thermal_exception) +#endif /* CONFIG_CBE_RAS */ + + /* + * Here r13 points to the paca, r9 contains the saved CR, + * SRR0 and SRR1 are saved in r11 and r12, + * r9 - r13 are saved in paca->exgen. + */ .align 7 .globl data_access_common data_access_common: @@ -1046,7 +1084,7 @@ data_access_common: ld r3,PACA_EXGEN+EX_DAR(r13) lwz r4,PACA_EXGEN+EX_DSISR(r13) li r5,0x300 - b .do_hash_page /* Try to handle as hpte fault */ + b do_hash_page /* Try to handle as hpte fault */ .align 7 .globl h_data_storage_common @@ -1056,11 +1094,11 @@ h_data_storage_common: mfspr r10,SPRN_HDSISR stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN) - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .unknown_exception - b .ret_from_except + bl unknown_exception + b ret_from_except .align 7 .globl instruction_access_common @@ -1071,72 +1109,9 @@ instruction_access_common: ld r3,_NIP(r1) andis. r4,r12,0x5820 li r5,0x400 - b .do_hash_page /* Try to handle as hpte fault */ + b do_hash_page /* Try to handle as hpte fault */ - STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception) - -/* - * Here is the common SLB miss user that is used when going to virtual - * mode for SLB misses, that is currently not used - */ -#ifdef __DISABLED__ - .align 7 - .globl slb_miss_user_common -slb_miss_user_common: - mflr r10 - std r3,PACA_EXGEN+EX_DAR(r13) - stw r9,PACA_EXGEN+EX_CCR(r13) - std r10,PACA_EXGEN+EX_LR(r13) - std r11,PACA_EXGEN+EX_SRR0(r13) - bl .slb_allocate_user - - ld r10,PACA_EXGEN+EX_LR(r13) - ld r3,PACA_EXGEN+EX_R3(r13) - lwz r9,PACA_EXGEN+EX_CCR(r13) - ld r11,PACA_EXGEN+EX_SRR0(r13) - mtlr r10 - beq- slb_miss_fault - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_user_slb - mfmsr r10 - -.machine push -.machine "power4" - mtcrf 0x80,r9 -.machine pop - - clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ - mtmsrd r10,1 - - mtspr SRR0,r11 - mtspr SRR1,r12 - - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . - -slb_miss_fault: - EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) - ld r4,PACA_EXGEN+EX_DAR(r13) - li r5,0 - std r4,_DAR(r1) - std r5,_DSISR(r1) - b handle_page_fault - -unrecov_user_slb: - EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -#endif /* __DISABLED__ */ + STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception) /* @@ -1158,10 +1133,10 @@ machine_check_common: lwz r4,PACA_EXGEN+EX_DSISR(r13) std r3,_DAR(r1) std r4,_DSISR(r1) - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_exception - b .ret_from_except + bl machine_check_exception + b ret_from_except .align 7 .globl alignment_common @@ -1175,31 +1150,31 @@ alignment_common: lwz r4,PACA_EXGEN+EX_DSISR(r13) std r3,_DAR(r1) std r4,_DSISR(r1) - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .alignment_exception - b .ret_from_except + bl alignment_exception + b ret_from_except .align 7 .globl program_check_common program_check_common: EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .program_check_exception - b .ret_from_except + bl program_check_exception + b ret_from_except .align 7 .globl fp_unavailable_common fp_unavailable_common: EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) bne 1f /* if from user, just load it up */ - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_fp_unavailable_exception + bl kernel_fp_unavailable_exception BUG_OPCODE 1: #ifdef CONFIG_PPC_TRANSACTIONAL_MEM @@ -1211,15 +1186,15 @@ BEGIN_FTR_SECTION bne- 2f END_FTR_SECTION_IFSET(CPU_FTR_TM) #endif - bl .load_up_fpu + bl load_up_fpu b fast_exception_return #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .fp_unavailable_tm - b .ret_from_except + bl fp_unavailable_tm + b ret_from_except #endif .align 7 .globl altivec_unavailable_common @@ -1237,24 +1212,24 @@ BEGIN_FTR_SECTION bne- 2f END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) #endif - bl .load_up_altivec + bl load_up_altivec b fast_exception_return #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .altivec_unavailable_tm - b .ret_from_except + bl altivec_unavailable_tm + b ret_from_except #endif 1: END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .altivec_unavailable_exception - b .ret_from_except + bl altivec_unavailable_exception + b ret_from_except .align 7 .globl vsx_unavailable_common @@ -1272,55 +1247,31 @@ BEGIN_FTR_SECTION bne- 2f END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) #endif - b .load_up_vsx + b load_up_vsx #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .vsx_unavailable_tm - b .ret_from_except + bl vsx_unavailable_tm + b ret_from_except #endif 1: END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .vsx_unavailable_exception - b .ret_from_except + bl vsx_unavailable_exception + b ret_from_except - STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception) - STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception) + STD_EXCEPTION_COMMON(0xf60, facility_unavailable, facility_unavailable_exception) + STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, facility_unavailable_exception) .align 7 .globl __end_handlers __end_handlers: - /* Equivalents to the above handlers for relocation-on interrupt vectors */ - STD_RELON_EXCEPTION_HV_OOL(0xe40, emulation_assist) - MASKABLE_RELON_EXCEPTION_HV_OOL(0xe80, h_doorbell) - - STD_RELON_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor) - STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable) - STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable) - STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable) - STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable) - -#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) -/* - * Data area reserved for FWNMI option. - * This address (0x7000) is fixed by the RPA. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - - /* pseries and powernv need to keep the whole page from - * 0x7000 to 0x8000 free for use by the firmware - */ - . = 0x8000 -#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ /* Space for CPU0's segment table */ .balign 4096 @@ -1386,9 +1337,9 @@ _GLOBAL(opal_mc_secondary_handler) machine_check_handle_early: std r0,GPR0(r1) /* Save r0 */ EXCEPTION_PROLOG_COMMON_3(0x200) - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_early + bl machine_check_early ld r12,_MSR(r1) #ifdef CONFIG_PPC_P7_NAP /* @@ -1408,11 +1359,11 @@ machine_check_handle_early: /* Supervisor state loss */ li r0,1 stb r0,PACA_NAPSTATELOST(r13) -3: bl .machine_check_queue_event +3: bl machine_check_queue_event MACHINE_CHECK_HANDLER_WINDUP GET_PACA(r13) ld r1,PACAR1(r13) - b .power7_enter_nap_mode + b power7_enter_nap_mode 4: #endif /* @@ -1444,7 +1395,7 @@ machine_check_handle_early: andi. r11,r12,MSR_RI bne 2f 1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception + bl unrecoverable_exception b 1b 2: /* @@ -1452,7 +1403,7 @@ machine_check_handle_early: * Queue up the MCE event so that we can log it later, while * returning from kernel or opal call. */ - bl .machine_check_queue_event + bl machine_check_queue_event MACHINE_CHECK_HANDLER_WINDUP rfid 9: @@ -1468,7 +1419,7 @@ machine_check_handle_early: * r3 is saved in paca->slb_r3 * We assume we aren't going to take any exceptions during this procedure. */ -_GLOBAL(slb_miss_realmode) +slb_miss_realmode: mflr r10 #ifdef CONFIG_RELOCATABLE mtctr r11 @@ -1477,7 +1428,7 @@ _GLOBAL(slb_miss_realmode) stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - bl .slb_allocate_realmode + bl slb_allocate_realmode /* All done -- return from exception. */ @@ -1517,9 +1468,9 @@ _GLOBAL(slb_miss_realmode) unrecov_slb: EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) DISABLE_INTS - bl .save_nvgprs + bl save_nvgprs 1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception + bl unrecoverable_exception b 1b @@ -1536,7 +1487,7 @@ power4_fixup_nap: * Hash table stuff */ .align 7 -_STATIC(do_hash_page) +do_hash_page: std r3,_DAR(r1) std r4,_DSISR(r1) @@ -1573,7 +1524,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) * * at return r3 = 0 for success, 1 for page fault, negative for error */ - bl .hash_page /* build HPTE if possible */ + bl hash_page /* build HPTE if possible */ cmpdi r3,0 /* see if hash_page succeeded */ /* Success */ @@ -1587,35 +1538,35 @@ handle_page_fault: 11: ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_page_fault + bl do_page_fault cmpdi r3,0 beq+ 12f - bl .save_nvgprs + bl save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD lwz r4,_DAR(r1) - bl .bad_page_fault - b .ret_from_except + bl bad_page_fault + b ret_from_except /* We have a data breakpoint exception - handle it */ handle_dabr_fault: - bl .save_nvgprs + bl save_nvgprs ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_break -12: b .ret_from_except_lite + bl do_break +12: b ret_from_except_lite /* We have a page fault that hash_page could handle but HV refused * the PTE insertion */ -13: bl .save_nvgprs +13: bl save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD ld r4,_DAR(r1) - bl .low_hash_fault - b .ret_from_except + bl low_hash_fault + b ret_from_except /* * We come here as a result of a DSI at a point where we don't want @@ -1624,16 +1575,16 @@ handle_dabr_fault: * were soft-disabled. We want to invoke the exception handler for * the access, or panic if there isn't a handler. */ -77: bl .save_nvgprs +77: bl save_nvgprs mr r4,r3 addi r3,r1,STACK_FRAME_OVERHEAD li r5,SIGSEGV - bl .bad_page_fault - b .ret_from_except + bl bad_page_fault + b ret_from_except /* here we have a segment miss */ do_ste_alloc: - bl .ste_allocate /* try to insert stab entry */ + bl ste_allocate /* try to insert stab entry */ cmpdi r3,0 bne- handle_page_fault b fast_exception_return @@ -1646,7 +1597,7 @@ do_ste_alloc: * We assume (DAR >> 60) == 0xc. */ .align 7 -_GLOBAL(do_stab_bolted) +do_stab_bolted: stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ mfspr r11,SPRN_DAR /* ea */ |