diff options
Diffstat (limited to 'arch/tile/kernel/intvec_64.S')
| -rw-r--r-- | arch/tile/kernel/intvec_64.S | 118 |
1 files changed, 72 insertions, 46 deletions
diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S index 49d9d6621682..7c06d597ffd0 100644 --- a/arch/tile/kernel/intvec_64.S +++ b/arch/tile/kernel/intvec_64.S @@ -220,7 +220,9 @@ intvec_\vecname: * This routine saves just the first four registers, plus the * stack context so we can do proper backtracing right away, * and defers to handle_interrupt to save the rest. - * The backtracer needs pc, ex1, lr, sp, r52, and faultnum. + * The backtracer needs pc, ex1, lr, sp, r52, and faultnum, + * and needs sp set to its final location at the bottom of + * the stack frame. */ addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP) wh64 r0 /* cache line 7 */ @@ -450,23 +452,6 @@ intvec_\vecname: push_reg r5, r52 st r52, r4 - /* Load tp with our per-cpu offset. */ -#ifdef CONFIG_SMP - { - mfspr r20, SPR_SYSTEM_SAVE_K_0 - moveli r21, hw2_last(__per_cpu_offset) - } - { - shl16insli r21, r21, hw1(__per_cpu_offset) - bfextu r20, r20, 0, LOG2_THREAD_SIZE-1 - } - shl16insli r21, r21, hw0(__per_cpu_offset) - shl3add r20, r20, r21 - ld tp, r20 -#else - move tp, zero -#endif - /* * If we will be returning to the kernel, we will need to * reset the interrupt masks to the state they had before. @@ -489,6 +474,44 @@ intvec_\vecname: .endif st r21, r32 + /* + * we've captured enough state to the stack (including in + * particular our EX_CONTEXT state) that we can now release + * the interrupt critical section and replace it with our + * standard "interrupts disabled" mask value. This allows + * synchronous interrupts (and profile interrupts) to punch + * through from this point onwards. + * + * It's important that no code before this point touch memory + * other than our own stack (to keep the invariant that this + * is all that gets touched under ICS), and that no code after + * this point reference any interrupt-specific SPR, in particular + * the EX_CONTEXT_K_ values. + */ + .ifc \function,handle_nmi + IRQ_DISABLE_ALL(r20) + .else + IRQ_DISABLE(r20, r21) + .endif + mtspr INTERRUPT_CRITICAL_SECTION, zero + + /* Load tp with our per-cpu offset. */ +#ifdef CONFIG_SMP + { + mfspr r20, SPR_SYSTEM_SAVE_K_0 + moveli r21, hw2_last(__per_cpu_offset) + } + { + shl16insli r21, r21, hw1(__per_cpu_offset) + bfextu r20, r20, 0, LOG2_THREAD_SIZE-1 + } + shl16insli r21, r21, hw0(__per_cpu_offset) + shl3add r20, r20, r21 + ld tp, r20 +#else + move tp, zero +#endif + #ifdef __COLLECT_LINKER_FEEDBACK__ /* * Notify the feedback routines that we were in the @@ -513,21 +536,6 @@ intvec_\vecname: #endif /* - * we've captured enough state to the stack (including in - * particular our EX_CONTEXT state) that we can now release - * the interrupt critical section and replace it with our - * standard "interrupts disabled" mask value. This allows - * synchronous interrupts (and profile interrupts) to punch - * through from this point onwards. - */ - .ifc \function,handle_nmi - IRQ_DISABLE_ALL(r20) - .else - IRQ_DISABLE(r20, r21) - .endif - mtspr INTERRUPT_CRITICAL_SECTION, zero - - /* * Prepare the first 256 stack bytes to be rapidly accessible * without having to fetch the background data. */ @@ -647,6 +655,20 @@ STD_ENTRY(interrupt_return) FEEDBACK_REENTER(interrupt_return) /* + * Use r33 to hold whether we have already loaded the callee-saves + * into ptregs. We don't want to do it twice in this loop, since + * then we'd clobber whatever changes are made by ptrace, etc. + */ + { + movei r33, 0 + move r32, sp + } + + /* Get base of stack in r32. */ + EXTRACT_THREAD_INFO(r32) + +.Lretry_work_pending: + /* * Disable interrupts so as to make sure we don't * miss an interrupt that sets any of the thread flags (like * need_resched or sigpending) between sampling and the iret. @@ -656,9 +678,6 @@ STD_ENTRY(interrupt_return) IRQ_DISABLE(r20, r21) TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */ - /* Get base of stack in r32; note r30/31 are used as arguments here. */ - GET_THREAD_INFO(r32) - /* Check to see if there is any work to do before returning to user. */ { @@ -674,16 +693,18 @@ STD_ENTRY(interrupt_return) /* * Make sure we have all the registers saved for signal - * handling or single-step. Call out to C code to figure out + * handling or notify-resume. Call out to C code to figure out * exactly what we need to do for each flag bit, then if * necessary, reload the flags and recheck. */ - push_extra_callee_saves r0 { PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - jal do_work_pending + bnez r33, 1f } - bnez r0, .Lresume_userspace + push_extra_callee_saves r0 + movei r33, 1 +1: jal do_work_pending + bnez r0, .Lretry_work_pending /* * In the NMI case we @@ -723,9 +744,10 @@ STD_ENTRY(interrupt_return) beqzt r30, .Lrestore_regs j 3f 2: TRACE_IRQS_ON + IRQ_ENABLE_LOAD(r20, r21) movei r0, 1 mtspr INTERRUPT_CRITICAL_SECTION, r0 - IRQ_ENABLE(r20, r21) + IRQ_ENABLE_APPLY(r20, r21) beqzt r30, .Lrestore_regs 3: @@ -742,7 +764,6 @@ STD_ENTRY(interrupt_return) * that will save some cycles if this turns out to be a syscall. */ .Lrestore_regs: - FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */ /* * Rotate so we have one high bit and one low bit to test. @@ -968,11 +989,16 @@ handle_syscall: shl16insli r20, r20, hw0(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) add r20, r20, tp ld4s r21, r20 - addi r21, r21, 1 - st4 r20, r21 + { + addi r21, r21, 1 + move r31, sp + } + { + st4 r20, r21 + EXTRACT_THREAD_INFO(r31) + } /* Trace syscalls, if requested. */ - GET_THREAD_INFO(r31) addi r31, r31, THREAD_INFO_FLAGS_OFFSET ld r30, r31 andi r30, r30, _TIF_SYSCALL_TRACE @@ -1231,7 +1257,7 @@ STD_ENTRY(fill_ra_stack) int_hand INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign int_hand INT_DTLB_MISS, DTLB_MISS, do_page_fault int_hand INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault - int_hand INT_IDN_FIREWALL, IDN_FIREWALL, bad_intr + int_hand INT_IDN_FIREWALL, IDN_FIREWALL, do_hardwall_trap int_hand INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap int_hand INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt int_hand INT_IDN_TIMER, IDN_TIMER, bad_intr |