summaryrefslogtreecommitdiff
path: root/arch/tile/kernel/traps.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile/kernel/traps.c')
-rw-r--r--arch/tile/kernel/traps.c317
1 files changed, 317 insertions, 0 deletions
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
new file mode 100644
index 000000000000..3870abbeeaa2
--- /dev/null
+++ b/arch/tile/kernel/traps.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/ptrace.h>
+#include <asm/opcode-tile.h>
+#include <asm/opcode_constants.h>
+#include <asm/stack.h>
+#include <asm/traps.h>
+
+#include <arch/interrupts.h>
+#include <arch/spr_def.h>
+
+void __init trap_init(void)
+{
+ /* Nothing needed here since we link code at .intrpt1 */
+}
+
+int unaligned_fixup = 1;
+
+static int __init setup_unaligned_fixup(char *str)
+{
+ /*
+ * Say "=-1" to completely disable it. If you just do "=0", we
+ * will still parse the instruction, then fire a SIGBUS with
+ * the correct address from inside the single_step code.
+ */
+ long val;
+ if (strict_strtol(str, 0, &val) != 0)
+ return 0;
+ unaligned_fixup = val;
+ pr_info("Fixups for unaligned data accesses are %s\n",
+ unaligned_fixup >= 0 ?
+ (unaligned_fixup ? "enabled" : "disabled") :
+ "completely disabled");
+ return 1;
+}
+__setup("unaligned_fixup=", setup_unaligned_fixup);
+
+#if CHIP_HAS_TILE_DMA()
+
+static int dma_disabled;
+
+static int __init nodma(char *str)
+{
+ pr_info("User-space DMA is disabled\n");
+ dma_disabled = 1;
+ return 1;
+}
+__setup("nodma", nodma);
+
+/* How to decode SPR_GPV_REASON */
+#define IRET_ERROR (1U << 31)
+#define MT_ERROR (1U << 30)
+#define MF_ERROR (1U << 29)
+#define SPR_INDEX ((1U << 15) - 1)
+#define SPR_MPL_SHIFT 9 /* starting bit position for MPL encoded in SPR */
+
+/*
+ * See if this GPV is just to notify the kernel of SPR use and we can
+ * retry the user instruction after adjusting some MPLs suitably.
+ */
+static int retry_gpv(unsigned int gpv_reason)
+{
+ int mpl;
+
+ if (gpv_reason & IRET_ERROR)
+ return 0;
+
+ BUG_ON((gpv_reason & (MT_ERROR|MF_ERROR)) == 0);
+ mpl = (gpv_reason & SPR_INDEX) >> SPR_MPL_SHIFT;
+ if (mpl == INT_DMA_NOTIFY && !dma_disabled) {
+ /* User is turning on DMA. Allow it and retry. */
+ printk(KERN_DEBUG "Process %d/%s is now enabled for DMA\n",
+ current->pid, current->comm);
+ BUG_ON(current->thread.tile_dma_state.enabled);
+ current->thread.tile_dma_state.enabled = 1;
+ grant_dma_mpls();
+ return 1;
+ }
+
+ return 0;
+}
+
+#endif /* CHIP_HAS_TILE_DMA() */
+
+#ifdef __tilegx__
+#define bundle_bits tilegx_bundle_bits
+#else
+#define bundle_bits tile_bundle_bits
+#endif
+
+extern bundle_bits bpt_code;
+
+asm(".pushsection .rodata.bpt_code,\"a\";"
+ ".align 8;"
+ "bpt_code: bpt;"
+ ".size bpt_code,.-bpt_code;"
+ ".popsection");
+
+static int special_ill(bundle_bits bundle, int *sigp, int *codep)
+{
+ int sig, code, maxcode;
+
+ if (bundle == bpt_code) {
+ *sigp = SIGTRAP;
+ *codep = TRAP_BRKPT;
+ return 1;
+ }
+
+ /* If it's a "raise" bundle, then "ill" must be in pipe X1. */
+#ifdef __tilegx__
+ if ((bundle & TILEGX_BUNDLE_MODE_MASK) != 0)
+ return 0;
+ if (get_Opcode_X1(bundle) != UNARY_OPCODE_X1)
+ return 0;
+ if (get_UnaryOpcodeExtension_X1(bundle) != ILL_UNARY_OPCODE_X1)
+ return 0;
+#else
+ if (bundle & TILE_BUNDLE_Y_ENCODING_MASK)
+ return 0;
+ if (get_Opcode_X1(bundle) != SHUN_0_OPCODE_X1)
+ return 0;
+ if (get_UnShOpcodeExtension_X1(bundle) != UN_0_SHUN_0_OPCODE_X1)
+ return 0;
+ if (get_UnOpcodeExtension_X1(bundle) != ILL_UN_0_SHUN_0_OPCODE_X1)
+ return 0;
+#endif
+
+ /* Check that the magic distinguishers are set to mean "raise". */
+ if (get_Dest_X1(bundle) != 29 || get_SrcA_X1(bundle) != 37)
+ return 0;
+
+ /* There must be an "addli zero, zero, VAL" in X0. */
+ if (get_Opcode_X0(bundle) != ADDLI_OPCODE_X0)
+ return 0;
+ if (get_Dest_X0(bundle) != TREG_ZERO)
+ return 0;
+ if (get_SrcA_X0(bundle) != TREG_ZERO)
+ return 0;
+
+ /*
+ * Validate the proposed signal number and si_code value.
+ * Note that we embed these in the static instruction itself
+ * so that we perturb the register state as little as possible
+ * at the time of the actual fault; it's unlikely you'd ever
+ * need to dynamically choose which kind of fault to raise
+ * from user space.
+ */
+ sig = get_Imm16_X0(bundle) & 0x3f;
+ switch (sig) {
+ case SIGILL:
+ maxcode = NSIGILL;
+ break;
+ case SIGFPE:
+ maxcode = NSIGFPE;
+ break;
+ case SIGSEGV:
+ maxcode = NSIGSEGV;
+ break;
+ case SIGBUS:
+ maxcode = NSIGBUS;
+ break;
+ case SIGTRAP:
+ maxcode = NSIGTRAP;
+ break;
+ default:
+ return 0;
+ }
+ code = (get_Imm16_X0(bundle) >> 6) & 0xf;
+ if (code <= 0 || code > maxcode)
+ return 0;
+
+ /* Make it the requested signal. */
+ *sigp = sig;
+ *codep = code | __SI_FAULT;
+ return 1;
+}
+
+void __kprobes do_trap(struct pt_regs *regs, int fault_num,
+ unsigned long reason)
+{
+ siginfo_t info = { 0 };
+ int signo, code;
+ unsigned long address;
+ bundle_bits instr;
+
+ /* Re-enable interrupts. */
+ local_irq_enable();
+
+ /*
+ * If it hits in kernel mode and we can't fix it up, just exit the
+ * current process and hope for the best.
+ */
+ if (!user_mode(regs)) {
+ if (fixup_exception(regs)) /* only UNALIGN_DATA in practice */
+ return;
+ pr_alert("Kernel took bad trap %d at PC %#lx\n",
+ fault_num, regs->pc);
+ if (fault_num == INT_GPV)
+ pr_alert("GPV_REASON is %#lx\n", reason);
+ show_regs(regs);
+ do_exit(SIGKILL); /* FIXME: implement i386 die() */
+ return;
+ }
+
+ switch (fault_num) {
+ case INT_ILL:
+ if (copy_from_user(&instr, (void __user *)regs->pc,
+ sizeof(instr))) {
+ pr_err("Unreadable instruction for INT_ILL:"
+ " %#lx\n", regs->pc);
+ do_exit(SIGKILL);
+ return;
+ }
+ if (!special_ill(instr, &signo, &code)) {
+ signo = SIGILL;
+ code = ILL_ILLOPC;
+ }
+ address = regs->pc;
+ break;
+ case INT_GPV:
+#if CHIP_HAS_TILE_DMA()
+ if (retry_gpv(reason))
+ return;
+#endif
+ /*FALLTHROUGH*/
+ case INT_UDN_ACCESS:
+ case INT_IDN_ACCESS:
+#if CHIP_HAS_SN()
+ case INT_SN_ACCESS:
+#endif
+ signo = SIGILL;
+ code = ILL_PRVREG;
+ address = regs->pc;
+ break;
+ case INT_SWINT_3:
+ case INT_SWINT_2:
+ case INT_SWINT_0:
+ signo = SIGILL;
+ code = ILL_ILLTRP;
+ address = regs->pc;
+ break;
+ case INT_UNALIGN_DATA:
+#ifndef __tilegx__ /* FIXME: GX: no single-step yet */
+ if (unaligned_fixup >= 0) {
+ struct single_step_state *state =
+ current_thread_info()->step_state;
+ if (!state ||
+ (void __user *)(regs->pc) != state->buffer) {
+ single_step_once(regs);
+ return;
+ }
+ }
+#endif
+ signo = SIGBUS;
+ code = BUS_ADRALN;
+ address = 0;
+ break;
+ case INT_DOUBLE_FAULT:
+ /*
+ * For double fault, "reason" is actually passed as
+ * SYSTEM_SAVE_1_2, the hypervisor's double-fault info, so
+ * we can provide the original fault number rather than
+ * the uninteresting "INT_DOUBLE_FAULT" so the user can
+ * learn what actually struck while PL0 ICS was set.
+ */
+ fault_num = reason;
+ signo = SIGILL;
+ code = ILL_DBLFLT;
+ address = regs->pc;
+ break;
+#ifdef __tilegx__
+ case INT_ILL_TRANS:
+ signo = SIGSEGV;
+ code = SEGV_MAPERR;
+ if (reason & SPR_ILL_TRANS_REASON__I_STREAM_VA_RMASK)
+ address = regs->pc;
+ else
+ address = 0; /* FIXME: GX: single-step for address */
+ break;
+#endif
+ default:
+ panic("Unexpected do_trap interrupt number %d", fault_num);
+ return;
+ }
+
+ info.si_signo = signo;
+ info.si_code = code;
+ info.si_addr = (void __user *)address;
+ if (signo == SIGILL)
+ info.si_trapno = fault_num;
+ force_sig_info(signo, &info, current);
+}
+
+void kernel_double_fault(int dummy, ulong pc, ulong lr, ulong sp, ulong r52)
+{
+ _dump_stack(dummy, pc, lr, sp, r52);
+ pr_emerg("Double fault: exiting\n");
+ machine_halt();
+}