summaryrefslogtreecommitdiff
path: root/arch/v850/kernel/ptrace.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/v850/kernel/ptrace.c')
-rw-r--r--arch/v850/kernel/ptrace.c235
1 files changed, 0 insertions, 235 deletions
diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c
deleted file mode 100644
index a458ac941b25..000000000000
--- a/arch/v850/kernel/ptrace.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * arch/v850/kernel/ptrace.c -- `ptrace' system call
- *
- * Copyright (C) 2002,03,04 NEC Electronics Corporation
- * Copyright (C) 2002,03,04 Miles Bader <miles@gnu.org>
- *
- * Derived from arch/mips/kernel/ptrace.c:
- *
- * Copyright (C) 1992 Ross Biro
- * Copyright (C) Linus Torvalds
- * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
- * Copyright (C) 1996 David S. Miller
- * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999 MIPS Technologies, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-/* Returns the address where the register at REG_OFFS in P is stashed away. */
-static v850_reg_t *reg_save_addr (unsigned reg_offs, struct task_struct *t)
-{
- struct pt_regs *regs;
-
- /* Three basic cases:
-
- (1) A register normally saved before calling the scheduler, is
- available in the kernel entry pt_regs structure at the top
- of the kernel stack. The kernel trap/irq exit path takes
- care to save/restore almost all registers for ptrace'd
- processes.
-
- (2) A call-clobbered register, where the process P entered the
- kernel via [syscall] trap, is not stored anywhere; that's
- OK, because such registers are not expected to be preserved
- when the trap returns anyway (so we don't actually bother to
- test for this case).
-
- (3) A few registers not used at all by the kernel, and so
- normally never saved except by context-switches, are in the
- context switch state. */
-
- if (reg_offs == PT_CTPC || reg_offs == PT_CTPSW || reg_offs == PT_CTBP)
- /* Register saved during context switch. */
- regs = thread_saved_regs (t);
- else
- /* Register saved during kernel entry (or not available). */
- regs = task_pt_regs (t);
-
- return (v850_reg_t *)((char *)regs + reg_offs);
-}
-
-/* Set the bits SET and clear the bits CLEAR in the v850e DIR
- (`debug information register'). Returns the new value of DIR. */
-static inline v850_reg_t set_dir (v850_reg_t set, v850_reg_t clear)
-{
- register v850_reg_t rval asm ("r10");
- register v850_reg_t arg0 asm ("r6") = set;
- register v850_reg_t arg1 asm ("r7") = clear;
-
- /* The dbtrap handler has exactly this functionality when called
- from kernel mode. 0xf840 is a `dbtrap' insn. */
- asm (".short 0xf840" : "=r" (rval) : "r" (arg0), "r" (arg1));
-
- return rval;
-}
-
-/* Makes sure hardware single-stepping is (globally) enabled.
- Returns true if successful. */
-static inline int enable_single_stepping (void)
-{
- static int enabled = 0; /* Remember whether we already did it. */
- if (! enabled) {
- /* Turn on the SE (`single-step enable') bit, 0x100, in the
- DIR (`debug information register'). This may fail if a
- processor doesn't support it or something. We also try
- to clear bit 0x40 (`INI'), which is necessary to use the
- debug stuff on the v850e2; on the v850e, clearing 0x40
- shouldn't cause any problem. */
- v850_reg_t dir = set_dir (0x100, 0x40);
- /* Make sure it really got set. */
- if (dir & 0x100)
- enabled = 1;
- }
- return enabled;
-}
-
-/* Try to set CHILD's single-step flag to VAL. Returns true if successful. */
-static int set_single_step (struct task_struct *t, int val)
-{
- v850_reg_t *psw_addr = reg_save_addr(PT_PSW, t);
- if (val) {
- /* Make sure single-stepping is enabled. */
- if (! enable_single_stepping ())
- return 0;
- /* Set T's single-step flag. */
- *psw_addr |= 0x800;
- } else
- *psw_addr &= ~0x800;
- return 1;
-}
-
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
- int rval;
-
- switch (request) {
- unsigned long val;
-
- case PTRACE_PEEKTEXT: /* read word at location addr. */
- case PTRACE_PEEKDATA:
- rval = generic_ptrace_peekdata(child, addr, data);
- goto out;
-
- case PTRACE_POKETEXT: /* write the word at location addr. */
- case PTRACE_POKEDATA:
- rval = generic_ptrace_pokedata(child, addr, data);
- goto out;
-
- /* Read/write the word at location ADDR in the registers. */
- case PTRACE_PEEKUSR:
- case PTRACE_POKEUSR:
- rval = 0;
- if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
- /* Special requests that don't actually correspond
- to offsets in struct pt_regs. */
- if (addr == PT_TEXT_ADDR)
- val = child->mm->start_code;
- else if (addr == PT_DATA_ADDR)
- val = child->mm->start_data;
- else if (addr == PT_TEXT_LEN)
- val = child->mm->end_code
- - child->mm->start_code;
- else
- rval = -EIO;
- } else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
- v850_reg_t *reg_addr = reg_save_addr(addr, child);
- if (request == PTRACE_PEEKUSR)
- val = *reg_addr;
- else
- *reg_addr = data;
- } else
- rval = -EIO;
-
- if (rval == 0 && request == PTRACE_PEEKUSR)
- rval = put_user (val, (unsigned long *)data);
- goto out;
-
- /* Continue and stop at next (return from) syscall */
- case PTRACE_SYSCALL:
- /* Restart after a signal. */
- case PTRACE_CONT:
- /* Execute a single instruction. */
- case PTRACE_SINGLESTEP:
- rval = -EIO;
- if (!valid_signal(data))
- break;
-
- /* Turn CHILD's single-step flag on or off. */
- if (! set_single_step (child, request == PTRACE_SINGLESTEP))
- break;
-
- if (request == PTRACE_SYSCALL)
- set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- else
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
- child->exit_code = data;
- wake_up_process(child);
- rval = 0;
- break;
-
- /*
- * make the child exit. Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
- case PTRACE_KILL:
- rval = 0;
- if (child->exit_state == EXIT_ZOMBIE) /* already dead */
- break;
- child->exit_code = SIGKILL;
- wake_up_process(child);
- break;
-
- case PTRACE_DETACH: /* detach a process that was attached. */
- set_single_step (child, 0); /* Clear single-step flag */
- rval = ptrace_detach(child, data);
- break;
-
- default:
- rval = -EIO;
- goto out;
- }
- out:
- return rval;
-}
-
-asmlinkage void syscall_trace(void)
-{
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
- if (!(current->ptrace & PT_PTRACED))
- return;
- /* The 0x80 provides a way for the tracing parent to distinguish
- between a syscall stop and SIGTRAP delivery */
- ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (current->exit_code) {
- send_sig(current->exit_code, current, 1);
- current->exit_code = 0;
- }
-}
-
-void ptrace_disable (struct task_struct *child)
-{
- /* nothing to do */
-}