summaryrefslogtreecommitdiff
path: root/arch/x86
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86')
-rw-r--r--arch/x86/kernel/geode_32.c5
-rw-r--r--arch/x86/kernel/pci-dma.c14
-rw-r--r--arch/x86/kernel/process_32.c1
-rw-r--r--arch/x86/kernel/process_64.c1
-rw-r--r--arch/x86/kernel/setup_32.c10
-rw-r--r--arch/x86/kernel/tsc_32.c18
-rw-r--r--arch/x86/lib/copy_user_64.S25
-rw-r--r--arch/x86/lib/copy_user_nocache_64.S25
-rw-r--r--arch/x86/pci/common.c8
9 files changed, 58 insertions, 49 deletions
diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c
index e8edd63ab000..9b08e852fd1a 100644
--- a/arch/x86/kernel/geode_32.c
+++ b/arch/x86/kernel/geode_32.c
@@ -166,6 +166,8 @@ int geode_has_vsa2(void)
static int has_vsa2 = -1;
if (has_vsa2 == -1) {
+ u16 val;
+
/*
* The VSA has virtual registers that we can query for a
* signature.
@@ -173,7 +175,8 @@ int geode_has_vsa2(void)
outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
- has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG);
+ val = inw(VSA_VRC_DATA);
+ has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG);
}
return has_vsa2;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index c5ef1af8e79d..dc00a1331ace 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -378,6 +378,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
struct page *page;
unsigned long dma_mask = 0;
dma_addr_t bus;
+ int noretry = 0;
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
@@ -397,20 +398,25 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
if (dev->dma_mask == NULL)
return NULL;
- /* Don't invoke OOM killer */
- gfp |= __GFP_NORETRY;
+ /* Don't invoke OOM killer or retry in lower 16MB DMA zone */
+ if (gfp & __GFP_DMA)
+ noretry = 1;
#ifdef CONFIG_X86_64
/* Why <=? Even when the mask is smaller than 4GB it is often
larger than 16MB and in this case we have a chance of
finding fitting memory in the next higher zone first. If
not retry with true GFP_DMA. -AK */
- if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA))
+ if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
gfp |= GFP_DMA32;
+ if (dma_mask < DMA_32BIT_MASK)
+ noretry = 1;
+ }
#endif
again:
- page = dma_alloc_pages(dev, gfp, get_order(size));
+ page = dma_alloc_pages(dev,
+ noretry ? gfp | __GFP_NORETRY : gfp, get_order(size));
if (page == NULL)
return NULL;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 2e8edce73b53..267f3f7d07f5 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -333,6 +333,7 @@ void flush_thread(void)
/*
* Forget coprocessor state..
*/
+ tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 93ea156bba6d..594cb95d8a99 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -298,6 +298,7 @@ void flush_thread(void)
/*
* Forget coprocessor state..
*/
+ tsk->fpu_counter = 0;
clear_fpu(tsk);
clear_used_math();
}
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 2c5f8b213e86..5a2f8e063887 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -532,10 +532,16 @@ static void __init reserve_crashkernel(void)
(unsigned long)(crash_size >> 20),
(unsigned long)(crash_base >> 20),
(unsigned long)(total_mem >> 20));
+
+ if (reserve_bootmem(crash_base, crash_size,
+ BOOTMEM_EXCLUSIVE) < 0) {
+ printk(KERN_INFO "crashkernel reservation "
+ "failed - memory is in use\n");
+ return;
+ }
+
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
- reserve_bootmem(crash_base, crash_size,
- BOOTMEM_DEFAULT);
} else
printk(KERN_INFO "crashkernel reservation failed - "
"you have to specify a base address\n");
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index 068759db63dd..65b70637ad97 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -14,7 +14,10 @@
#include "mach_timer.h"
-static int tsc_disabled;
+/* native_sched_clock() is called before tsc_init(), so
+ we must start with the TSC soft disabled to prevent
+ erroneous rdtsc usage on !cpu_has_tsc processors */
+static int tsc_disabled = -1;
/*
* On some systems the TSC frequency does not
@@ -402,25 +405,20 @@ void __init tsc_init(void)
{
int cpu;
- if (!cpu_has_tsc || tsc_disabled) {
- /* Disable the TSC in case of !cpu_has_tsc */
- tsc_disabled = 1;
+ if (!cpu_has_tsc || tsc_disabled > 0)
return;
- }
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
if (!cpu_khz) {
mark_tsc_unstable("could not calculate TSC khz");
- /*
- * We need to disable the TSC completely in this case
- * to prevent sched_clock() from using it.
- */
- tsc_disabled = 1;
return;
}
+ /* now allow native_sched_clock() to use rdtsc */
+ tsc_disabled = 0;
+
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 70bebd310408..ee1c3f635157 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -217,19 +217,19 @@ ENTRY(copy_user_generic_unrolled)
/* table sorted by exception address */
.section __ex_table,"a"
.align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
+ .quad .Ls1,.Ls1e /* Ls1-Ls4 have copied zero bytes */
+ .quad .Ls2,.Ls1e
+ .quad .Ls3,.Ls1e
+ .quad .Ls4,.Ls1e
+ .quad .Ld1,.Ls1e /* Ld1-Ld4 have copied 0-24 bytes */
.quad .Ld2,.Ls2e
.quad .Ld3,.Ls3e
.quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
+ .quad .Ls5,.Ls5e /* Ls5-Ls8 have copied 32 bytes */
+ .quad .Ls6,.Ls5e
+ .quad .Ls7,.Ls5e
+ .quad .Ls8,.Ls5e
+ .quad .Ld5,.Ls5e /* Ld5-Ld8 have copied 32-56 bytes */
.quad .Ld6,.Ls6e
.quad .Ld7,.Ls7e
.quad .Ld8,.Ls8e
@@ -244,11 +244,8 @@ ENTRY(copy_user_generic_unrolled)
.quad .Le5,.Le_zero
.previous
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
/* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
+.Ls1e: addl $8,%eax /* eax is bytes left uncopied within the loop (Ls1e: 64 .. Ls8e: 8) */
.Ls2e: addl $8,%eax
.Ls3e: addl $8,%eax
.Ls4e: addl $8,%eax
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 5196762b3b0e..9d3d1ab83763 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -145,19 +145,19 @@ ENTRY(__copy_user_nocache)
/* table sorted by exception address */
.section __ex_table,"a"
.align 8
- .quad .Ls1,.Ls1e
- .quad .Ls2,.Ls2e
- .quad .Ls3,.Ls3e
- .quad .Ls4,.Ls4e
- .quad .Ld1,.Ls1e
+ .quad .Ls1,.Ls1e /* .Ls[1-4] - 0 bytes copied */
+ .quad .Ls2,.Ls1e
+ .quad .Ls3,.Ls1e
+ .quad .Ls4,.Ls1e
+ .quad .Ld1,.Ls1e /* .Ld[1-4] - 0..24 bytes coped */
.quad .Ld2,.Ls2e
.quad .Ld3,.Ls3e
.quad .Ld4,.Ls4e
- .quad .Ls5,.Ls5e
- .quad .Ls6,.Ls6e
- .quad .Ls7,.Ls7e
- .quad .Ls8,.Ls8e
- .quad .Ld5,.Ls5e
+ .quad .Ls5,.Ls5e /* .Ls[5-8] - 32 bytes copied */
+ .quad .Ls6,.Ls5e
+ .quad .Ls7,.Ls5e
+ .quad .Ls8,.Ls5e
+ .quad .Ld5,.Ls5e /* .Ld[5-8] - 32..56 bytes copied */
.quad .Ld6,.Ls6e
.quad .Ld7,.Ls7e
.quad .Ld8,.Ls8e
@@ -172,11 +172,8 @@ ENTRY(__copy_user_nocache)
.quad .Le5,.Le_zero
.previous
- /* compute 64-offset for main loop. 8 bytes accuracy with error on the
- pessimistic side. this is gross. it would be better to fix the
- interface. */
/* eax: zero, ebx: 64 */
-.Ls1e: addl $8,%eax
+.Ls1e: addl $8,%eax /* eax: bytes left uncopied: Ls1e: 64 .. Ls8e: 8 */
.Ls2e: addl $8,%eax
.Ls3e: addl $8,%eax
.Ls4e: addl $8,%eax
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 6e64aaf00d1d..940185ecaeda 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -328,18 +328,18 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
#endif
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL385 G2",
+ .ident = "HP ProLiant DL360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
},
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL585 G2",
+ .ident = "HP ProLiant DL380",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
},
},
{}
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-30 17:43:08 +0000