diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/boot/dts/meson8.dtsi | 57 | ||||
| -rw-r--r-- | arch/arm/boot/dts/meson8b.dtsi | 12 | ||||
| -rw-r--r-- | arch/arm/configs/u8500_defconfig | 3 | ||||
| -rw-r--r-- | arch/arm/mach-uniphier/platsmp.c | 2 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/broadcom/vulcan.dtsi | 15 |
5 files changed, 55 insertions, 34 deletions
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index a2ddcb8c545a..45619f6162c5 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -91,8 +91,8 @@ clock-frequency = <141666666>; }; - pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8-pinctrl"; + pinctrl_cbus: pinctrl@c1109880 { + compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -108,29 +108,6 @@ #gpio-cells = <2>; }; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; - - i2c_ao_pins: i2c_mst_ao { - mux { - groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; - function = "i2c_mst_ao"; - }; - }; - spi_nor_pins: nor { mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; @@ -157,4 +134,34 @@ }; }; + pinctrl_aobus: pinctrl@c8100084 { + compatible = "amlogic,meson8-aobus-pinctrl"; + reg = <0xc8100084 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio_ao: ao-bank@c1108030 { + reg = <0xc8100014 0x4>, + <0xc810002c 0x4>, + <0xc8100024 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + i2c_ao_pins: i2c_mst_ao { + mux { + groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; + function = "i2c_mst_ao"; + }; + }; + }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 8bad5571af46..2bfe401a4da9 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -155,8 +155,8 @@ reg = <0xc1108000 0x4>, <0xc1104000 0x460>; }; - pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8b-pinctrl"; + pinctrl_cbus: pinctrl@c1109880 { + compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -171,6 +171,14 @@ gpio-controller; #gpio-cells = <2>; }; + }; + + pinctrl_aobus: pinctrl@c8100084 { + compatible = "amlogic,meson8b-aobus-pinctrl"; + reg = <0xc8100084 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; gpio_ao: ao-bank@c1108030 { reg = <0xc8100014 0x4>, diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 07055eacbb0f..a691d590fbd1 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_BU21013=y CONFIG_INPUT_MISC=y CONFIG_INPUT_AB8500_PONKEY=y +CONFIG_RMI4_CORE=y +CONFIG_RMI4_I2C=y +CONFIG_RMI4_F11=y # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index 69141357afe8..db04142f88bc 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus) if (ret) return ret; - uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4)); + uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4); if (!uniphier_smp_rom_boot_rsv2) { pr_err("failed to map ROM_BOOT_RSV2 register\n"); return -ENOMEM; diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/broadcom/vulcan.dtsi index c49b5a85809c..85820e2bca9d 100644 --- a/arch/arm64/boot/dts/broadcom/vulcan.dtsi +++ b/arch/arm64/boot/dts/broadcom/vulcan.dtsi @@ -108,12 +108,15 @@ reg = <0x0 0x30000000 0x0 0x10000000>; reg-names = "PCI ECAM"; - /* IO 0x4000_0000 - 0x4001_0000 */ - ranges = <0x01000000 0 0x40000000 0 0x40000000 0 0x00010000 - /* MEM 0x4800_0000 - 0x5000_0000 */ - 0x02000000 0 0x48000000 0 0x48000000 0 0x08000000 - /* MEM64 pref 0x6_0000_0000 - 0x7_0000_0000 */ - 0x43000000 6 0x00000000 6 0x00000000 1 0x00000000>; + /* + * PCI ranges: + * IO no supported + * MEM 0x4000_0000 - 0x6000_0000 + * MEM64 pref 0x40_0000_0000 - 0x60_0000_0000 + */ + ranges = + <0x02000000 0 0x40000000 0 0x40000000 0 0x20000000 + 0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>; interrupt-map-mask = <0 0 0 7>; interrupt-map = /* addr pin ic icaddr icintr */ |