diff options
Diffstat (limited to 'arch')
235 files changed, 7247 insertions, 2518 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c5408bf1bf43..b725280d0760 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -42,6 +42,11 @@ config GENERIC_GPIO config GENERIC_TIME bool + default y + +config ARCH_USES_GETTIMEOFFSET + bool + default n config GENERIC_CLOCKEVENTS bool @@ -231,6 +236,7 @@ config ARCH_AAEC2000 select CPU_ARM920T select ARM_AMBA select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Agilent AAEC-2000 @@ -238,21 +244,24 @@ config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA select ARCH_HAS_CPUFREQ - select HAVE_CLK select COMMON_CLKDEV - select ICST525 + select ICST + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select PLAT_VERSATILE help Support for ARM's Integrator platform. config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA - select HAVE_CLK select COMMON_CLKDEV - select ICST307 + select ICST select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select PLAT_VERSATILE + select ARM_TIMER_SP804 help This enables support for ARM Ltd RealView boards. @@ -260,20 +269,36 @@ config ARCH_VERSATILE bool "ARM Ltd. Versatile family" select ARM_AMBA select ARM_VIC - select HAVE_CLK select COMMON_CLKDEV - select ICST307 + select ICST select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select PLAT_VERSATILE + select ARM_TIMER_SP804 help This enables support for ARM Ltd Versatile board. +config ARCH_VEXPRESS + bool "ARM Ltd. Versatile Express family" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_TIMER_SP804 + select COMMON_CLKDEV + select GENERIC_CLOCKEVENTS + select GENERIC_TIME + select HAVE_CLK + select ICST + select PLAT_VERSATILE + help + This enables support for the ARM Ltd Versatile Express boards. + config ARCH_AT91 bool "Atmel AT91" select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -293,6 +318,7 @@ config ARCH_BCMRING config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x-based" select CPU_ARM720T + select ARCH_USES_GETTIMEOFFSET help Support for Cirrus Logic 711x/721x based boards. @@ -301,6 +327,7 @@ config ARCH_GEMINI select CPU_FA526 select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET help Support for the Cortina Systems Gemini family SoCs @@ -309,6 +336,7 @@ config ARCH_EBSA110 select CPU_SA110 select ISA select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -321,10 +349,10 @@ config ARCH_EP93XX select ARM_AMBA select ARM_VIC select GENERIC_GPIO - select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_USES_GETTIMEOFFSET help This enables support for the Cirrus EP93xx series of CPUs. @@ -332,6 +360,7 @@ config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 select FOOTBRIDGE + select ARCH_USES_GETTIMEOFFSET help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -341,7 +370,6 @@ config ARCH_MXC select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select COMMON_CLKDEV help Support for Freescale MXC/iMX-based family of processors @@ -349,7 +377,6 @@ config ARCH_MXC config ARCH_STMP3XXX bool "Freescale STMP3xxx" select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME @@ -372,6 +399,7 @@ config ARCH_H720X bool "Hynix HMS720x-based" select CPU_ARM720T select ISA_DMA_API + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Hynix HMS720x @@ -414,6 +442,7 @@ config ARCH_IXP23XX depends on MMU select CPU_XSC3 select PCI + select ARCH_USES_GETTIMEOFFSET help Support for Intel's IXP23xx (XScale) family of processors. @@ -422,6 +451,7 @@ config ARCH_IXP2000 depends on MMU select CPU_XSCALE select PCI + select ARCH_USES_GETTIMEOFFSET help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -440,6 +470,7 @@ config ARCH_L7200 bool "LinkUp-L7200" select CPU_ARM720T select FIQ + select ARCH_USES_GETTIMEOFFSET help Say Y here if you intend to run this kernel on a LinkUp Systems L7200 Software Development Board which uses an ARM720T processor. @@ -516,7 +547,6 @@ config ARCH_MMP depends on MMU select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -530,6 +560,7 @@ config ARCH_KS8695 select CPU_ARM922T select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -552,7 +583,6 @@ config ARCH_W90X900 select CPU_ARM926T select ARCH_REQUIRE_GPIOLIB select GENERIC_GPIO - select HAVE_CLK select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -568,7 +598,6 @@ config ARCH_W90X900 config ARCH_NUC93X bool "Nuvoton NUC93X CPU" select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV help Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a @@ -577,8 +606,8 @@ config ARCH_NUC93X config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV + select ARCH_USES_GETTIMEOFFSET help This enables support for Philips PNX4008 mobile platform. @@ -588,7 +617,6 @@ config ARCH_PXA select ARCH_MTD_XIP select ARCH_HAS_CPUFREQ select GENERIC_GPIO - select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME @@ -624,6 +652,7 @@ config ARCH_RPC select ISA_DMA_API select NO_IOPORT select ARCH_SPARSEMEM_ENABLE + select ARCH_USES_GETTIMEOFFSET help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -650,6 +679,7 @@ config ARCH_S3C2410 select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or @@ -663,6 +693,7 @@ config ARCH_S3C64XX select ARM_VIC select HAVE_CLK select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select SAMSUNG_CLKSRC @@ -719,6 +750,7 @@ config ARCH_SHARK select ISA_DMA select ZONE_DMA select PCI + select ARCH_USES_GETTIMEOFFSET help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -728,6 +760,7 @@ config ARCH_LH7A40X select CPU_ARM922T select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM + select ARCH_USES_GETTIMEOFFSET help Say Y here for systems based on one of the Sharp LH7A40X System on a Chip processors. These CPUs include an ARM922T @@ -743,7 +776,6 @@ config ARCH_U300 select ARM_VIC select GENERIC_TIME select GENERIC_CLOCKEVENTS - select HAVE_CLK select COMMON_CLKDEV select GENERIC_GPIO help @@ -756,6 +788,7 @@ config ARCH_U8500 select GENERIC_TIME select GENERIC_CLOCKEVENTS select COMMON_CLKDEV + select ARCH_REQUIRE_GPIOLIB help Support for ST-Ericsson's Ux500 architecture @@ -764,7 +797,6 @@ config ARCH_NOMADIK select ARM_AMBA select ARM_VIC select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -780,7 +812,6 @@ config ARCH_DAVINCI select GENERIC_CLOCKEVENTS select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select ZONE_DMA select HAVE_IDE select COMMON_CLKDEV @@ -919,6 +950,8 @@ source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" +source "arch/arm/mach-vexpress/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier @@ -936,6 +969,12 @@ config PLAT_ORION config PLAT_PXA bool +config PLAT_VERSATILE + bool + +config ARM_TIMER_SP804 + bool + source arch/arm/mm/Kconfig config IWMMXT @@ -1092,10 +1131,11 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500) + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ + ARCH_U8500 || ARCH_VEXPRESS_CA9X4) depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500) + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ed820e737a8a..67c92efa3112 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -175,6 +175,7 @@ machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_U8500) := ux500 machine-$(CONFIG_ARCH_VERSATILE) := versatile +machine-$(CONFIG_ARCH_VEXPRESS) := vexpress machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_ARCH_NUC93X) := nuc93x machine-$(CONFIG_FOOTBRIDGE) := footbridge @@ -192,6 +193,7 @@ plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung plat-$(CONFIG_PLAT_S5P) := s5p samsung +plat-$(CONFIG_PLAT_VERSATILE) := versatile ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 4efbb9df0444..eb99891297cc 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -12,10 +12,7 @@ config ARM_VIC_NR The maximum number of VICs available in the system, for power management. -config ICST525 - bool - -config ICST307 +config ICST bool config SA1111 @@ -40,3 +37,4 @@ config SHARP_SCOOP config COMMON_CLKDEV bool + select HAVE_CLK diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 76be7ff2a7ca..5e8ad0d6c917 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -4,8 +4,7 @@ obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ARM_VIC) += vic.o -obj-$(CONFIG_ICST525) += icst525.o -obj-$(CONFIG_ICST307) += icst307.o +obj-$(CONFIG_ICST) += icst.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 6416d5b5020d..4f8390dd6cac 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -52,12 +52,13 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) continue; match += 1; } - if (match == 0) - continue; if (match > best) { clk = p->clk; - best = match; + if (match != 3) + best = match; + else + break; } } return clk; diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c new file mode 100644 index 000000000000..9a7f09cff300 --- /dev/null +++ b/arch/arm/common/icst.c @@ -0,0 +1,100 @@ +/* + * linux/arch/arm/common/icst307.c + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST307 + * clock generators. See http://www.icst.com/ for more information + * on these devices. + * + * This is an almost identical implementation to the ICST525 clock generator. + * The s2div and idx2s files are different + */ +#include <linux/module.h> +#include <linux/kernel.h> + +#include <asm/hardware/icst.h> + +/* + * Divisors for each OD setting. + */ +const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 }; +const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 }; +EXPORT_SYMBOL(icst307_s2div); +EXPORT_SYMBOL(icst525_s2div); + +unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco) +{ + return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]); +} + +EXPORT_SYMBOL(icst_hz); + +/* + * Ascending divisor S values. + */ +const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 }; +const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 }; +EXPORT_SYMBOL(icst307_idx2s); +EXPORT_SYMBOL(icst525_idx2s); + +struct icst_vco +icst_hz_to_vco(const struct icst_params *p, unsigned long freq) +{ + struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; + unsigned long f; + unsigned int i = 0, rd, best = (unsigned int)-1; + + /* + * First, find the PLL output divisor such + * that the PLL output is within spec. + */ + do { + f = freq * p->s2div[p->idx2s[i]]; + + if (f > p->vco_min && f <= p->vco_max) + break; + } while (i < 8); + + if (i >= 8) + return vco; + + vco.s = p->idx2s[i]; + + /* + * Now find the closest divisor combination + * which gives a PLL output of 'f'. + */ + for (rd = p->rd_min; rd <= p->rd_max; rd++) { + unsigned long fref_div, f_pll; + unsigned int vd; + int f_diff; + + fref_div = (2 * p->ref) / rd; + + vd = (f + fref_div / 2) / fref_div; + if (vd < p->vd_min || vd > p->vd_max) + continue; + + f_pll = fref_div * vd; + f_diff = f_pll - f; + if (f_diff < 0) + f_diff = -f_diff; + + if ((unsigned)f_diff < best) { + vco.v = vd - 8; + vco.r = rd - 2; + if (f_diff == 0) + break; + best = f_diff; + } + } + + return vco; +} + +EXPORT_SYMBOL(icst_hz_to_vco); diff --git a/arch/arm/common/icst307.c b/arch/arm/common/icst307.c deleted file mode 100644 index 6d094c157540..000000000000 --- a/arch/arm/common/icst307.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * linux/arch/arm/common/icst307.c - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This is an almost identical implementation to the ICST525 clock generator. - * The s2div and idx2s files are different - */ -#include <linux/module.h> -#include <linux/kernel.h> - -#include <asm/hardware/icst307.h> - -/* - * Divisors for each OD setting. - */ -static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 }; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco) -{ - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]); -} - -EXPORT_SYMBOL(icst307_khz); - -/* - * Ascending divisor S values. - */ -static unsigned char idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 }; - -struct icst307_vco -icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq) -{ - struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f; - unsigned int i = 0, rd, best = (unsigned int)-1; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = freq * s2div[idx2s[i]]; - - /* - * f must be between 6MHz and 200MHz (3.3 or 5V) - */ - if (f > 6000 && f <= p->vco_max) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long fref_div, f_pll; - unsigned int vd; - int f_diff; - - fref_div = (2 * p->ref) / rd; - - vd = (f + fref_div / 2) / fref_div; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = fref_div * vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst307_khz_to_vco); - -struct icst307_vco -icst307_ps_to_vco(const struct icst307_params *p, unsigned long period) -{ - struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f, ps; - unsigned int i = 0, rd, best = (unsigned int)-1; - - ps = 1000000000UL / p->vco_max; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = period / s2div[idx2s[i]]; - - /* - * f must be between 6MHz and 200MHz (3.3 or 5V) - */ - if (f >= ps && f < 1000000000UL / 6000 + 1) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - ps = 500000000UL / p->ref; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long f_in_div, f_pll; - unsigned int vd; - int f_diff; - - f_in_div = ps * rd; - - vd = (f_in_div + f / 2) / f; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = (f_in_div + vd / 2) / vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst307_ps_to_vco); diff --git a/arch/arm/common/icst525.c b/arch/arm/common/icst525.c deleted file mode 100644 index 3d377c5bdef6..000000000000 --- a/arch/arm/common/icst525.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * linux/arch/arm/common/icst525.c - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#include <linux/module.h> -#include <linux/kernel.h> - -#include <asm/hardware/icst525.h> - -/* - * Divisors for each OD setting. - */ -static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 }; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco) -{ - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]); -} - -EXPORT_SYMBOL(icst525_khz); - -/* - * Ascending divisor S values. - */ -static unsigned char idx2s[] = { 1, 3, 4, 7, 5, 2, 6, 0 }; - -struct icst525_vco -icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq) -{ - struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f; - unsigned int i = 0, rd, best = (unsigned int)-1; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = freq * s2div[idx2s[i]]; - - /* - * f must be between 10MHz and - * 320MHz (5V) or 200MHz (3V) - */ - if (f > 10000 && f <= p->vco_max) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long fref_div, f_pll; - unsigned int vd; - int f_diff; - - fref_div = (2 * p->ref) / rd; - - vd = (f + fref_div / 2) / fref_div; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = fref_div * vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst525_khz_to_vco); - -struct icst525_vco -icst525_ps_to_vco(const struct icst525_params *p, unsigned long period) -{ - struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f, ps; - unsigned int i = 0, rd, best = (unsigned int)-1; - - ps = 1000000000UL / p->vco_max; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = period / s2div[idx2s[i]]; - - /* - * f must be between 10MHz and - * 320MHz (5V) or 200MHz (3V) - */ - if (f >= ps && f < 100000) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - ps = 500000000UL / p->ref; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long f_in_div, f_pll; - unsigned int vd; - int f_diff; - - f_in_div = ps * rd; - - vd = (f_in_div + f / 2) / f; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = (f_in_div + vd / 2) / vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst525_ps_to_vco); diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index f5c6e11cf189..881faea03d79 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -661,7 +661,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index ea9a5012d332..5e55b550a408 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -680,7 +680,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 72da7e045c6b..0d08d4170b64 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -15,6 +15,7 @@ #include <asm/glue.h> #include <asm/shmparam.h> #include <asm/cachetype.h> +#include <asm/outercache.h> #define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) @@ -219,12 +220,6 @@ struct cpu_cache_fns { void (*dma_flush_range)(const void *, const void *); }; -struct outer_cache_fns { - void (*inv_range)(unsigned long, unsigned long); - void (*clean_range)(unsigned long, unsigned long); - void (*flush_range)(unsigned long, unsigned long); -}; - /* * Select the calling method */ @@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *); #endif -#ifdef CONFIG_OUTER_CACHE - -extern struct outer_cache_fns outer_cache; - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ - if (outer_cache.inv_range) - outer_cache.inv_range(start, end); -} -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ - if (outer_cache.clean_range) - outer_cache.clean_range(start, end); -} -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ - if (outer_cache.flush_range) - outer_cache.flush_range(start, end); -} - -#else - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ } -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ } -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ } - -#endif - /* * Copy user data from/to a page which is mapped into a different * processes address space. Really, we want to allow our "user diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h index 7a0690da5e63..b56c1389b6fa 100644 --- a/arch/arm/include/asm/clkdev.h +++ b/arch/arm/include/asm/clkdev.h @@ -13,6 +13,7 @@ #define __ASM_CLKDEV_H struct clk; +struct device; struct clk_lookup { struct list_head node; diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h index 04be3bdf46b8..c0f4e7bf22de 100644 --- a/arch/arm/include/asm/hardware/arm_timer.h +++ b/arch/arm/include/asm/hardware/arm_timer.h @@ -1,21 +1,30 @@ #ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H #define __ASM_ARM_HARDWARE_ARM_TIMER_H -#define TIMER_LOAD 0x00 -#define TIMER_VALUE 0x04 -#define TIMER_CTRL 0x08 -#define TIMER_CTRL_ONESHOT (1 << 0) -#define TIMER_CTRL_32BIT (1 << 1) -#define TIMER_CTRL_DIV1 (0 << 2) -#define TIMER_CTRL_DIV16 (1 << 2) -#define TIMER_CTRL_DIV256 (2 << 2) -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ -#define TIMER_CTRL_PERIODIC (1 << 6) -#define TIMER_CTRL_ENABLE (1 << 7) +/* + * ARM timer implementation, found in Integrator, Versatile and Realview + * platforms. Not all platforms support all registers and bits in these + * registers, so we mark them with A for Integrator AP, C for Integrator + * CP, V for Versatile and R for Realview. + * + * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview + * can have 16-bit or 32-bit selectable via a bit in the control register. + */ +#define TIMER_LOAD 0x00 /* ACVR rw */ +#define TIMER_VALUE 0x04 /* ACVR ro */ +#define TIMER_CTRL 0x08 /* ACVR rw */ +#define TIMER_CTRL_ONESHOT (1 << 0) /* CVR */ +#define TIMER_CTRL_32BIT (1 << 1) /* CVR */ +#define TIMER_CTRL_DIV1 (0 << 2) /* ACVR */ +#define TIMER_CTRL_DIV16 (1 << 2) /* ACVR */ +#define TIMER_CTRL_DIV256 (2 << 2) /* ACVR */ +#define TIMER_CTRL_IE (1 << 5) /* VR */ +#define TIMER_CTRL_PERIODIC (1 << 6) /* ACVR */ +#define TIMER_CTRL_ENABLE (1 << 7) /* ACVR */ -#define TIMER_INTCLR 0x0c -#define TIMER_RIS 0x10 -#define TIMER_MIS 0x14 -#define TIMER_BGLOAD 0x18 +#define TIMER_INTCLR 0x0c /* ACVR wo */ +#define TIMER_RIS 0x10 /* CVR ro */ +#define TIMER_MIS 0x14 /* CVR ro */ +#define TIMER_BGLOAD 0x18 /* CVR rw */ #endif diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h new file mode 100644 index 000000000000..10382a3dcec9 --- /dev/null +++ b/arch/arm/include/asm/hardware/icst.h @@ -0,0 +1,59 @@ +/* + * arch/arm/include/asm/hardware/icst.h + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST + * clock generators. See http://www.icst.com/ for more information + * on these devices. + */ +#ifndef ASMARM_HARDWARE_ICST_H +#define ASMARM_HARDWARE_ICST_H + +struct icst_params { + unsigned long ref; + unsigned long vco_max; /* inclusive */ + unsigned long vco_min; /* exclusive */ + unsigned short vd_min; /* inclusive */ + unsigned short vd_max; /* inclusive */ + unsigned char rd_min; /* inclusive */ + unsigned char rd_max; /* inclusive */ + const unsigned char *s2div; /* chip specific s2div array */ + const unsigned char *idx2s; /* chip specific idx2s array */ +}; + +struct icst_vco { + unsigned short v; + unsigned char r; + unsigned char s; +}; + +unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco); +struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq); + +/* + * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V). + * This frequency is pre-output divider. + */ +#define ICST307_VCO_MIN 6000000 +#define ICST307_VCO_MAX 200000000 + +extern const unsigned char icst307_s2div[]; +extern const unsigned char icst307_idx2s[]; + +/* + * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V). + * This frequency is pre-output divider. + */ +#define ICST525_VCO_MIN 10000000 +#define ICST525_VCO_MAX_3V 200000000 +#define ICST525_VCO_MAX_5V 320000000 + +extern const unsigned char icst525_s2div[]; +extern const unsigned char icst525_idx2s[]; + +#endif diff --git a/arch/arm/include/asm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h deleted file mode 100644 index 554f128a1046..000000000000 --- a/arch/arm/include/asm/hardware/icst307.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/arm/include/asm/hardware/icst307.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICS307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This file is similar to the icst525.h file - */ -#ifndef ASMARM_HARDWARE_ICST307_H -#define ASMARM_HARDWARE_ICST307_H - -struct icst307_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst307_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco); -struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq); -struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period); - -#endif diff --git a/arch/arm/include/asm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h deleted file mode 100644 index 58f0dc43e2ed..000000000000 --- a/arch/arm/include/asm/hardware/icst525.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/include/asm/hardware/icst525.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#ifndef ASMARM_HARDWARE_ICST525_H -#define ASMARM_HARDWARE_ICST525_H - -struct icst525_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst525_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco); -struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq); -struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period); - -#endif diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 328f14a8b790..237282f7c762 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -17,6 +17,7 @@ #ifndef __ASSEMBLY__ struct irqaction; +struct pt_regs; extern void migrate_irqs(void); extern void asm_do_IRQ(unsigned int, struct pt_regs *); diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index 8bffc3ff3acf..35d408f6dccf 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -38,7 +38,7 @@ struct sys_timer { void (*init)(void); void (*suspend)(void); void (*resume)(void); -#ifndef CONFIG_GENERIC_TIME +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET unsigned long (*offset)(void); #endif }; diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h new file mode 100644 index 000000000000..25f76bae57ab --- /dev/null +++ b/arch/arm/include/asm/outercache.h @@ -0,0 +1,75 @@ +/* + * arch/arm/include/asm/outercache.h + * + * Copyright (C) 2010 ARM Ltd. + * Written by Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_OUTERCACHE_H +#define __ASM_OUTERCACHE_H + +struct outer_cache_fns { + void (*inv_range)(unsigned long, unsigned long); + void (*clean_range)(unsigned long, unsigned long); + void (*flush_range)(unsigned long, unsigned long); +#ifdef CONFIG_OUTER_CACHE_SYNC + void (*sync)(void); +#endif +}; + +#ifdef CONFIG_OUTER_CACHE + +extern struct outer_cache_fns outer_cache; + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ + if (outer_cache.inv_range) + outer_cache.inv_range(start, end); +} +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ + if (outer_cache.clean_range) + outer_cache.clean_range(start, end); +} +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ + if (outer_cache.flush_range) + outer_cache.flush_range(start, end); +} + +#else + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ } +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ } +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ } + +#endif + +#ifdef CONFIG_OUTER_CACHE_SYNC +static inline void outer_sync(void) +{ + if (outer_cache.sync) + outer_cache.sync(); +} +#else +static inline void outer_sync(void) +{ } +#endif + +#endif /* __ASM_OUTERCACHE_H */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index ca88e6a84707..4ace45ec3ef8 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -60,6 +60,8 @@ #include <linux/linkage.h> #include <linux/irqflags.h> +#include <asm/outercache.h> + #define __exception __attribute__((section(".exception.text"))) struct thread_info; @@ -137,10 +139,12 @@ extern unsigned int user_debug; #define dmb() __asm__ __volatile__ ("" : : : "memory") #endif -#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) -#define mb() dmb() +#ifdef CONFIG_ARCH_HAS_BARRIERS +#include <mach/barriers.h> +#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) +#define mb() do { dsb(); outer_sync(); } while (0) #define rmb() dmb() -#define wmb() dmb() +#define wmb() mb() #else #define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) @@ -152,9 +156,9 @@ extern unsigned int user_debug; #define smp_rmb() barrier() #define smp_wmb() barrier() #else -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() +#define smp_mb() dmb() +#define smp_rmb() dmb() +#define smp_wmb() dmb() #endif #define read_barrier_depends() do { } while(0) diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 60c62c377fa9..610e0f561c32 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -393,6 +393,14 @@ void __kprobes jprobe_return(void) /* * Setup an empty pt_regs. Fill SP and PC fields as * they're needed by longjmp_break_handler. + * + * We allocate some slack between the original SP and start of + * our fabricated regs. To be precise we want to have worst case + * covered which is STMFD with all 16 regs so we allocate 2 * + * sizeof(struct_pt_regs)). + * + * This is to prevent any simulated instruction from writing + * over the regs when they are accessing the stack. */ "sub sp, %0, %1 \n\t" "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t" @@ -410,7 +418,7 @@ void __kprobes jprobe_return(void) "ldmia sp, {r0 - pc} \n\t" : : "r" (kcb->jprobe_saved_regs.ARM_sp), - "I" (sizeof(struct pt_regs)), + "I" (sizeof(struct pt_regs) * 2), "J" (offsetof(struct pt_regs, ARM_sp)), "J" (offsetof(struct pt_regs, ARM_pc)), "J" (offsetof(struct pt_regs, ARM_cpsr)) diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 28753805d2d1..38c261f9951c 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -72,12 +72,15 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); #endif -#ifndef CONFIG_GENERIC_TIME -static unsigned long dummy_gettimeoffset(void) +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET +u32 arch_gettimeoffset(void) { + if (system_timer->offset != NULL) + return system_timer->offset() * 1000; + return 0; } -#endif +#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ #ifdef CONFIG_LEDS_TIMER static inline void do_leds(void) @@ -93,63 +96,6 @@ static inline void do_leds(void) #define do_leds() #endif -#ifndef CONFIG_GENERIC_TIME -void do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = system_timer->offset(); - sec = xtime.tv_sec; - usec += xtime.tv_nsec / 1000; - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - /* usec may have gone up a lot: be safe */ - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * done, and then undo it! - */ - nsec -= system_timer->offset() * NSEC_PER_USEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); -#endif /* !CONFIG_GENERIC_TIME */ #ifndef CONFIG_GENERIC_CLOCKEVENTS /* @@ -214,10 +160,6 @@ device_initcall(timer_init_sysfs); void __init time_init(void) { -#ifndef CONFIG_GENERIC_TIME - if (system_timer->offset == NULL) - system_timer->offset = dummy_gettimeoffset; -#endif system_timer->init(); } diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S index 5025c863713d..938fc14f962d 100644 --- a/arch/arm/lib/memmove.S +++ b/arch/arm/lib/memmove.S @@ -74,7 +74,7 @@ ENTRY(memmove) rsb ip, ip, #32 addne pc, pc, ip @ C is always clear here b 7f -6: nop +6: W(nop) W(ldr) r3, [r1, #-4]! W(ldr) r4, [r1, #-4]! W(ldr) r5, [r1, #-4]! @@ -85,7 +85,7 @@ ENTRY(memmove) add pc, pc, ip nop - nop + W(nop) W(str) r3, [r0, #-4]! W(str) r4, [r0, #-4]! W(str) r5, [r0, #-4]! diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2db43a5ddd9b..8a5e8e9fe448 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -97,6 +97,7 @@ config ARCH_AT572D940HF config ARCH_AT91X40 bool "AT91x40" + select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index dc19870b23cd..ea293b8a596a 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -229,15 +229,22 @@ static const short da830_evm_mmc_sd_pins[] = { }; #define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) +#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) static int da830_evm_mmc_get_ro(int index) { return gpio_get_value(DA830_MMCSD_WP_PIN); } +static int da830_evm_mmc_get_cd(int index) +{ + return !gpio_get_value(DA830_MMCSD_CD_PIN); +} + static struct davinci_mmc_config da830_evm_mmc_config = { .get_ro = da830_evm_mmc_get_ro, - .wires = 4, + .get_cd = da830_evm_mmc_get_cd, + .wires = 8, .max_freq = 50000000, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .version = MMC_CTLR_VERSION_2, @@ -262,6 +269,14 @@ static inline void da830_evm_init_mmc(void) } gpio_direction_input(DA830_MMCSD_WP_PIN); + ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n"); + if (ret) { + pr_warning("da830_evm_init: can not open GPIO %d\n", + DA830_MMCSD_CD_PIN); + return; + } + gpio_direction_input(DA830_MMCSD_CD_PIN); + ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); if (ret) { pr_warning("da830_evm_init: mmc/sd registration failed: %d\n", diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 976e11b7fa4a..95cef1f46ef2 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -111,7 +111,7 @@ static struct platform_device davinci_evm_norflash_device = { * It may used instead of the (default) NOR chip to boot, using TI's * tools to install the secondary boot loader (UBL) and U-Boot. */ -struct mtd_partition davinci_evm_nandflash_partition[] = { +static struct mtd_partition davinci_evm_nandflash_partition[] = { /* Bootloader layout depends on whose u-boot is installed, but we * can hide all the details. * - block 0 for u-boot environment ... in mainline u-boot diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index bd9ca079b69d..1fadc68d9fbb 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -60,7 +60,7 @@ #define NAND_BLOCK_SIZE SZ_128K -struct mtd_partition davinci_ntosd2_nandflash_partition[] = { +static struct mtd_partition davinci_ntosd2_nandflash_partition[] = { { /* UBL (a few copies) plus U-Boot */ .name = "bootloader", diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 08d373bfcc8a..a7cf810bb13e 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -48,7 +48,7 @@ #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -struct mtd_partition davinci_sffsdr_nandflash_partition[] = { +static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 * UBL: Block 1 * U-Boot: Blocks 6-7 (256 kb) diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c index aec375690543..ba8b12b2913b 100644 --- a/arch/arm/mach-davinci/cdce949.c +++ b/arch/arm/mach-davinci/cdce949.c @@ -19,6 +19,7 @@ #include <linux/i2c.h> #include <mach/clock.h> +#include <mach/cdce949.h> #include "clock.h" diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index bf6218ee94e1..058c77f72a07 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -22,6 +22,7 @@ #include <mach/hardware.h> +#include <mach/clock.h> #include <mach/psc.h> #include <mach/cputype.h> #include "clock.h" diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 147949650c25..ef28080b1fda 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -23,6 +23,8 @@ #include <mach/mmc.h> #include <mach/time.h> +#include "clock.h" + #define DAVINCI_I2C_BASE 0x01C21000 #define DAVINCI_MMCSD0_BASE 0x01E10000 #define DM355_MMCSD0_BASE 0x01E11000 diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 3dc0a88712eb..5efce70ccdd0 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -798,7 +798,7 @@ static void __iomem *dm355_psc_bases[] = { * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) * T1_TOP: Timer 1, top : <unused> */ -struct davinci_timer_info dm355_timer_info = { +static struct davinci_timer_info dm355_timer_info = { .timers = davinci_timer_instance, .clockevent_id = T0_BOT, .clocksource_id = T0_TOP, diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 27772e18e45b..871be5af2735 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_MMCINT] = 7, [IRQ_DM365_MMCINT1] = 7, [IRQ_DM365_PWMINT3] = 7, - [IRQ_DDRINT] = 4, [IRQ_AEMIFINT] = 2, [IRQ_DM365_SDIOINT1] = 2, [IRQ_TINT0_TINT12] = 7, @@ -1011,7 +1010,7 @@ static void __iomem *dm365_psc_bases[] = { IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), }; -struct davinci_timer_info dm365_timer_info = { +static struct davinci_timer_info dm365_timer_info = { .timers = davinci_timer_instance, .clockevent_id = T0_BOT, .clocksource_id = T0_TOP, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 2f2ae8bc77bb..23cbe9d04bc5 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -277,7 +277,7 @@ static struct clk timer2_clk = { .usecount = 1, /* REVISIT: why cant' this be disabled? */ }; -struct clk_lookup dm644x_clks[] = { +static struct clk_lookup dm644x_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll1", &pll1_clk), CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), @@ -687,7 +687,7 @@ static void __iomem *dm644x_psc_bases[] = { * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) * T1_TOP: Timer 1, top : <unused> */ -struct davinci_timer_info dm644x_timer_info = { +static struct davinci_timer_info dm644x_timer_info = { .timers = davinci_timer_instance, .clockevent_id = T0_BOT, .clocksource_id = T0_TOP, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 893baf4ad37d..b67b997d0bbc 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -311,7 +311,7 @@ static struct clk vpif1_clk = { .flags = ALWAYS_ENABLED, }; -struct clk_lookup dm646x_clks[] = { +static struct clk_lookup dm646x_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "aux", &aux_clkin), CLK(NULL, "pll1", &pll1_clk), @@ -797,7 +797,7 @@ static void __iomem *dm646x_psc_bases[] = { * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) * T1_TOP: Timer 1, top : <unused> */ -struct davinci_timer_info dm646x_timer_info = { +static struct davinci_timer_info dm646x_timer_info = { .timers = davinci_timer_instance, .clockevent_id = T0_BOT, .clocksource_id = T0_TOP, @@ -867,7 +867,7 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .sram_len = SZ_32K, }; -void __init dm646x_init_ide() +void __init dm646x_init_ide(void) { davinci_cfg_reg(DM646X_ATAEN); platform_device_register(&ide_dev); diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 15dd886df04c..77839876c942 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -358,9 +358,11 @@ static irqreturn_t dma_irq_handler(int irq, void *data) while (1) { int j; - if (edma_shadow0_read_array(ctlr, SH_IPR, 0)) + if (edma_shadow0_read_array(ctlr, SH_IPR, 0) & + edma_shadow0_read_array(ctlr, SH_IER, 0)) j = 0; - else if (edma_shadow0_read_array(ctlr, SH_IPR, 1)) + else if (edma_shadow0_read_array(ctlr, SH_IPR, 1) & + edma_shadow0_read_array(ctlr, SH_IER, 1)) j = 1; else break; @@ -368,8 +370,9 @@ static irqreturn_t dma_irq_handler(int irq, void *data) edma_shadow0_read_array(ctlr, SH_IPR, j)); for (i = 0; i < 32; i++) { int k = (j << 5) + i; - if (edma_shadow0_read_array(ctlr, SH_IPR, j) & - (1 << i)) { + if ((edma_shadow0_read_array(ctlr, SH_IPR, j) & BIT(i)) + && (edma_shadow0_read_array(ctlr, + SH_IER, j) & BIT(i))) { /* Clear the corresponding IPR bits */ edma_shadow0_write_array(ctlr, SH_ICR, j, (1 << i)); @@ -1266,7 +1269,8 @@ int edma_start(unsigned channel) /* EDMA channel with event association */ pr_debug("EDMA: ER%d %08x\n", j, edma_shadow0_read_array(ctlr, SH_ER, j)); - /* Clear any pending error */ + /* Clear any pending event or error */ + edma_write_array(ctlr, EDMA_ECR, j, mask); edma_write_array(ctlr, EDMA_EMCR, j, mask); /* Clear any SER */ edma_shadow0_write_array(ctlr, SH_SECR, j, mask); diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index 744755b53236..5476ad132044 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -24,18 +24,27 @@ static DEFINE_SPINLOCK(gpio_lock); struct davinci_gpio { struct gpio_chip chip; - struct gpio_controller *__iomem regs; + struct gpio_controller __iomem *regs; int irq_base; }; static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; /* create a non-inlined version */ -static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) +static struct gpio_controller __iomem __init *gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } +static inline struct gpio_controller __iomem *irq2controller(int irq) +{ + struct gpio_controller __iomem *g; + + g = (__force struct gpio_controller __iomem *)get_irq_chip_data(irq); + + return g; +} + static int __init davinci_gpio_irq_setup(void); /*--------------------------------------------------------------------------*/ @@ -48,7 +57,7 @@ static int __init davinci_gpio_irq_setup(void); static int davinci_direction_in(struct gpio_chip *chip, unsigned offset) { struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip); - struct gpio_controller *__iomem g = d->regs; + struct gpio_controller __iomem *g = d->regs; u32 temp; spin_lock(&gpio_lock); @@ -70,7 +79,7 @@ static int davinci_direction_in(struct gpio_chip *chip, unsigned offset) static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset) { struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip); - struct gpio_controller *__iomem g = d->regs; + struct gpio_controller __iomem *g = d->regs; return (1 << offset) & __raw_readl(&g->in_data); } @@ -79,7 +88,7 @@ static int davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value) { struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip); - struct gpio_controller *__iomem g = d->regs; + struct gpio_controller __iomem *g = d->regs; u32 temp; u32 mask = 1 << offset; @@ -99,7 +108,7 @@ static void davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip); - struct gpio_controller *__iomem g = d->regs; + struct gpio_controller __iomem *g = d->regs; __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data); } @@ -161,7 +170,7 @@ pure_initcall(davinci_gpio_setup); static void gpio_irq_disable(unsigned irq) { - struct gpio_controller *__iomem g = get_irq_chip_data(irq); + struct gpio_controller __iomem *g = irq2controller(irq); u32 mask = (u32) get_irq_data(irq); __raw_writel(mask, &g->clr_falling); @@ -170,7 +179,7 @@ static void gpio_irq_disable(unsigned irq) static void gpio_irq_enable(unsigned irq) { - struct gpio_controller *__iomem g = get_irq_chip_data(irq); + struct gpio_controller __iomem *g = irq2controller(irq); u32 mask = (u32) get_irq_data(irq); unsigned status = irq_desc[irq].status; @@ -186,7 +195,7 @@ static void gpio_irq_enable(unsigned irq) static int gpio_irq_type(unsigned irq, unsigned trigger) { - struct gpio_controller *__iomem g = get_irq_chip_data(irq); + struct gpio_controller __iomem *g = irq2controller(irq); u32 mask = (u32) get_irq_data(irq); if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) @@ -215,7 +224,7 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { - struct gpio_controller *__iomem g = get_irq_chip_data(irq); + struct gpio_controller __iomem *g = irq2controller(irq); u32 mask = 0xffff; /* we only care about one bank */ @@ -276,7 +285,7 @@ static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) static int gpio_irq_type_unbanked(unsigned irq, unsigned trigger) { - struct gpio_controller *__iomem g = get_irq_chip_data(irq); + struct gpio_controller __iomem *g = irq2controller(irq); u32 mask = (u32) get_irq_data(irq); if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) @@ -305,7 +314,7 @@ static int __init davinci_gpio_irq_setup(void) u32 binten = 0; unsigned ngpio, bank_irq; struct davinci_soc_info *soc_info = &davinci_soc_info; - struct gpio_controller *__iomem g; + struct gpio_controller __iomem *g; ngpio = soc_info->gpio_num; @@ -362,7 +371,7 @@ static int __init davinci_gpio_irq_setup(void) for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) { set_irq_chip(irq, &gpio_irqchip_unbanked); set_irq_data(irq, (void *) __gpio_mask(gpio)); - set_irq_chip_data(irq, g); + set_irq_chip_data(irq, (__force void *) g); irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH; } @@ -385,12 +394,12 @@ static int __init davinci_gpio_irq_setup(void) /* set up all irqs in this bank */ set_irq_chained_handler(bank_irq, gpio_irq_handler); - set_irq_chip_data(bank_irq, g); - set_irq_data(bank_irq, (void *)irq); + set_irq_chip_data(bank_irq, (__force void *) g); + set_irq_data(bank_irq, (void *) irq); for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); - set_irq_chip_data(irq, g); + set_irq_chip_data(irq, (__force void *) g); set_irq_data(irq, (void *) __gpio_mask(gpio)); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index cc9be7fee627..b87a6ba0de3c 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -144,6 +144,10 @@ extern const short da850_mmcsd0_pins[]; extern const short da850_nand_pins[]; extern const short da850_nor_pins[]; +#ifdef CONFIG_DAVINCI_MUX int da8xx_pinmux_setup(const short pins[]); +#else +static inline int da8xx_pinmux_setup(const short pins[]) { return 0; } +#endif #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index f3b8ef878158..0099e6e5aff8 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -67,10 +67,10 @@ struct gpio_controller { * * These are NOT part of the cross-platform GPIO interface */ -static inline struct gpio_controller *__iomem +static inline struct gpio_controller __iomem * __gpio_to_controller(unsigned gpio) { - void *__iomem ptr; + void __iomem *ptr; void __iomem *base = davinci_soc_info.gpio_base; if (gpio < 32 * 1) @@ -102,7 +102,7 @@ static inline u32 __gpio_mask(unsigned gpio) static inline void gpio_set_value(unsigned gpio, int value) { if (__builtin_constant_p(value) && gpio < DAVINCI_N_GPIO) { - struct gpio_controller *__iomem g; + struct gpio_controller __iomem *g; u32 mask; g = __gpio_to_controller(gpio); @@ -128,7 +128,7 @@ static inline void gpio_set_value(unsigned gpio, int value) */ static inline int gpio_get_value(unsigned gpio) { - struct gpio_controller *__iomem g; + struct gpio_controller __iomem *g; if (!__builtin_constant_p(gpio) || gpio >= DAVINCI_N_GPIO) return __gpio_get_value(gpio); diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index f757e83415f3..c942c893a2eb 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -21,6 +21,7 @@ #include <mach/mux.h> #include <mach/common.h> +#include <mach/da8xx.h> /* * Sets the DAVINCI MUX register based on the table diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 42d985beece5..9e0b106b4f5f 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -253,8 +253,6 @@ static void __init timer_init(void) irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq; setup_irq(irq, &t->irqaction); } - - timer32_config(&timers[i]); } } @@ -331,6 +329,7 @@ static void __init davinci_timer_init(void) unsigned int clocksource_id; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; + int i; clockevent_id = soc_info->timer_info->clockevent_id; clocksource_id = soc_info->timer_info->clocksource_id; @@ -389,6 +388,9 @@ static void __init davinci_timer_init(void) clockevent_davinci.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_davinci); + + for (i=0; i< ARRAY_SIZE(timers); i++) + timer32_config(&timers[i]); } struct sys_timer davinci_timer = { diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index df97d16390e3..27db275b367c 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -11,6 +11,7 @@ config ARCH_INTEGRATOR_AP config ARCH_INTEGRATOR_CP bool "Support Integrator/CP platform" select ARCH_CINTEGRATOR + select ARM_TIMER_SP804 help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 6a5ef8d30b10..ebeef966e1f5 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := clock.o core.o lm.o +obj-y := core.o lm.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h deleted file mode 100644 index 609c49de3d47..000000000000 --- a/arch/arm/mach-integrator/common.h +++ /dev/null @@ -1,2 +0,0 @@ -extern void integrator_time_init(unsigned long, unsigned int); -extern unsigned long integrator_gettimeoffset(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 8b390e36ba69..b02cfc06e0ae 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -24,15 +24,13 @@ #include <asm/clkdev.h> #include <mach/clkdev.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/irq.h> -#include <asm/hardware/arm_timer.h> #include <mach/cm.h> #include <asm/system.h> #include <asm/leds.h> #include <asm/mach/time.h> -#include "common.h" - static struct amba_pl010_data integrator_uart_data; static struct amba_device rtc_device = { @@ -163,8 +161,8 @@ arch_initcall(integrator_init); * UART0 7 6 * UART1 5 4 */ -#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET) -#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET) +#define SC_CTRLC IO_ADDRESS(INTEGRATOR_SC_CTRLC) +#define SC_CTRLS IO_ADDRESS(INTEGRATOR_SC_CTRLS) static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) { @@ -196,7 +194,7 @@ static struct amba_pl010_data integrator_uart_data = { .set_mctrl = integrator_uart_set_mctrl, }; -#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET +#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) static DEFINE_SPINLOCK(cm_lock); @@ -217,120 +215,3 @@ void cm_control(u32 mask, u32 set) } EXPORT_SYMBOL(cm_control); - -/* - * Where is the timer (VA)? - */ -#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000) -#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100) -#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200) -#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) - -/* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static unsigned long timer_reload; - -/* - * Returns number of ms since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -unsigned long integrator_gettimeoffset(void) -{ - unsigned long ticks1, ticks2, status; - - /* - * Get the current number of ticks. Note that there is a race - * condition between us reading the timer and checking for - * an interrupt. We get around this by ensuring that the - * counter has not reloaded between our two reads. - */ - ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; - do { - ticks1 = ticks2; - status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS); - ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; - } while (ticks2 > ticks1); - - /* - * Number of ticks since last interrupt. - */ - ticks1 = timer_reload - ticks2; - - /* - * Interrupt pending? If so, we've reloaded once already. - */ - if (status & (1 << IRQ_TIMERINT1)) - ticks1 += timer_reload; - - /* - * Convert the ticks to usecs - */ - return TICKS2USECS(ticks1); -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t -integrator_timer_interrupt(int irq, void *dev_id) -{ - /* - * clear the interrupt - */ - writel(1, TIMER1_VA_BASE + TIMER_INTCLR); - - timer_tick(); - - return IRQ_HANDLED; -} - -static struct irqaction integrator_timer_irq = { - .name = "Integrator Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = integrator_timer_interrupt, -}; - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -void __init integrator_time_init(unsigned long reload, unsigned int ctrl) -{ - unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; - - timer_reload = reload; - timer_ctrl |= ctrl; - - if (timer_reload > 0x100000) { - timer_reload >>= 8; - timer_ctrl |= TIMER_CTRL_DIV256; - } else if (timer_reload > 0x010000) { - timer_reload >>= 4; - timer_ctrl |= TIMER_CTRL_DIV16; - } - - /* - * Initialise to a known state (all timers off) - */ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - - writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD); - writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE); - writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL); - - /* - * Make irqs happen for the system timer - */ - setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); -} diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c index 44d4c2e8207b..1cb222daa06d 100644 --- a/arch/arm/mach-integrator/cpu.c +++ b/arch/arm/mach-integrator/cpu.c @@ -20,32 +20,39 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/mach-types.h> -#include <asm/hardware/icst525.h> +#include <asm/hardware/icst.h> static struct cpufreq_driver integrator_driver; -#define CM_ID (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_ID_OFFSET) -#define CM_OSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_OSC_OFFSET) -#define CM_STAT (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_STAT_OFFSET) -#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) +#define CM_ID IO_ADDRESS(INTEGRATOR_HDR_ID) +#define CM_OSC IO_ADDRESS(INTEGRATOR_HDR_OSC) +#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT) +#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK) -static const struct icst525_params lclk_params = { - .ref = 24000, - .vco_max = 320000, +static const struct icst_params lclk_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, .vd_min = 8, .vd_max = 132, .rd_min = 24, .rd_max = 24, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; -static const struct icst525_params cclk_params = { - .ref = 24000, - .vco_max = 320000, +static const struct icst_params cclk_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, .vd_min = 12, .vd_max = 160, .rd_min = 24, .rd_max = 24, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; /* @@ -53,17 +60,17 @@ static const struct icst525_params cclk_params = { */ static int integrator_verify_policy(struct cpufreq_policy *policy) { - struct icst525_vco vco; + struct icst_vco vco; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - vco = icst525_khz_to_vco(&cclk_params, policy->max); - policy->max = icst525_khz(&cclk_params, vco); + vco = icst_hz_to_vco(&cclk_params, policy->max * 1000); + policy->max = icst_hz(&cclk_params, vco) / 1000; - vco = icst525_khz_to_vco(&cclk_params, policy->min); - policy->min = icst525_khz(&cclk_params, vco); + vco = icst_hz_to_vco(&cclk_params, policy->min * 1000); + policy->min = icst_hz(&cclk_params, vco) / 1000; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, @@ -79,7 +86,7 @@ static int integrator_set_target(struct cpufreq_policy *policy, { cpumask_t cpus_allowed; int cpu = policy->cpu; - struct icst525_vco vco; + struct icst_vco vco; struct cpufreq_freqs freqs; u_int cm_osc; @@ -105,17 +112,17 @@ static int integrator_set_target(struct cpufreq_policy *policy, } vco.v = cm_osc & 255; vco.r = 22; - freqs.old = icst525_khz(&cclk_params, vco); + freqs.old = icst_hz(&cclk_params, vco) / 1000; - /* icst525_khz_to_vco rounds down -- so we need the next + /* icst_hz_to_vco rounds down -- so we need the next * larger freq in case of CPUFREQ_RELATION_L. */ if (relation == CPUFREQ_RELATION_L) target_freq += 999; if (target_freq > policy->max) target_freq = policy->max; - vco = icst525_khz_to_vco(&cclk_params, target_freq); - freqs.new = icst525_khz(&cclk_params, vco); + vco = icst_hz_to_vco(&cclk_params, target_freq * 1000); + freqs.new = icst_hz(&cclk_params, vco) / 1000; freqs.cpu = policy->cpu; @@ -155,7 +162,7 @@ static unsigned int integrator_get(unsigned int cpu) cpumask_t cpus_allowed; unsigned int current_freq; u_int cm_osc; - struct icst525_vco vco; + struct icst_vco vco; cpus_allowed = current->cpus_allowed; @@ -173,7 +180,7 @@ static unsigned int integrator_get(unsigned int cpu) vco.v = cm_osc & 255; vco.r = 22; - current_freq = icst525_khz(&cclk_params, vco); /* current freq */ + current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */ set_cpus_allowed(current, cpus_allowed); diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 0058c937719e..1a0ee93e4519 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -24,7 +24,7 @@ #include <asm/clkdev.h> #include <mach/clkdev.h> -#include <asm/hardware/icst525.h> +#include <asm/hardware/icst.h> #include <mach/lm.h> #include <mach/impd1.h> #include <asm/sizes.h> @@ -40,32 +40,25 @@ struct impd1_module { struct clk_lookup *clks[3]; }; -static const struct icst525_params impd1_vco_params = { - .ref = 24000, /* 24 MHz */ - .vco_max = 200000, /* 200 MHz */ +static const struct icst_params impd1_vco_params = { + .ref = 24000000, /* 24 MHz */ + .vco_max = ICST525_VCO_MAX_3V, + .vco_min = ICST525_VCO_MIN, .vd_min = 12, .vd_max = 519, .rd_min = 3, .rd_max = 120, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; -static void impd1_setvco(struct clk *clk, struct icst525_vco vco) +static void impd1_setvco(struct clk *clk, struct icst_vco vco) { struct impd1_module *impd1 = clk->data; - int vconr = clk - impd1->vcos; - u32 val; - - val = vco.v | (vco.r << 9) | (vco.s << 16); + u32 val = vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, impd1->base + IMPD1_LOCK); - switch (vconr) { - case 0: - writel(val, impd1->base + IMPD1_OSC1); - break; - case 1: - writel(val, impd1->base + IMPD1_OSC2); - break; - } + writel(val, clk->vcoreg); writel(0, impd1->base + IMPD1_LOCK); #ifdef DEBUG @@ -73,11 +66,17 @@ static void impd1_setvco(struct clk *clk, struct icst525_vco vco) vco.r = (val >> 9) & 0x7f; vco.s = (val >> 16) & 7; - pr_debug("IM-PD1: VCO%d clock is %ld kHz\n", - vconr, icst525_khz(&impd1_vco_params, vco)); + pr_debug("IM-PD1: VCO%d clock is %ld Hz\n", + vconr, icst525_hz(&impd1_vco_params, vco)); #endif } +static const struct clk_ops impd1_clk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = impd1_setvco, +}; + void impd1_tweak_control(struct device *dev, u32 mask, u32 val) { struct impd1_module *impd1 = dev_get_drvdata(dev); @@ -373,11 +372,13 @@ static int impd1_probe(struct lm_device *dev) (unsigned long)dev->resource.start); for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { + impd1->vcos[i].ops = &impd1_clk_ops, impd1->vcos[i].owner = THIS_MODULE, impd1->vcos[i].params = &impd1_vco_params, - impd1->vcos[i].data = impd1, - impd1->vcos[i].setvco = impd1_setvco; + impd1->vcos[i].data = impd1; } + impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1; + impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2; impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000", dev->id); diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h index 9293e410832a..bfe07679faec 100644 --- a/arch/arm/mach-integrator/include/mach/clkdev.h +++ b/arch/arm/mach-integrator/include/mach/clkdev.h @@ -2,14 +2,15 @@ #define __ASM_MACH_CLKDEV_H #include <linux/module.h> -#include <asm/hardware/icst525.h> +#include <plat/clock.h> struct clk { unsigned long rate; + const struct clk_ops *ops; struct module *owner; - const struct icst525_params *params; + const struct icst_params *params; + void __iomem *vcoreg; void *data; - void (*setvco)(struct clk *, struct icst525_vco vco); }; static inline int __clk_get(struct clk *clk) diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S index 7649c57acb53..3d029c9f3ef6 100644 --- a/arch/arm/mach-integrator/include/mach/entry-macro.S +++ b/arch/arm/mach-integrator/include/mach/entry-macro.S @@ -8,6 +8,7 @@ * warranty of any kind, whether express or implied. */ #include <mach/hardware.h> +#include <mach/platform.h> #include <mach/irqs.h> .macro disable_fiq diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h index d795642fad22..8e26360ce9a3 100644 --- a/arch/arm/mach-integrator/include/mach/hardware.h +++ b/arch/arm/mach-integrator/include/mach/hardware.h @@ -23,7 +23,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <mach/platform.h> /* * Where in virtual memory the IO devices (timers, system controllers @@ -36,17 +35,19 @@ #define PCIO_BASE PCI_IO_VADDR #define PCIMEM_BASE PCI_MEMORY_VADDR -#ifdef CONFIG_MMU -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) -#else -#define IO_ADDRESS(x) (x) -#endif - #define pcibios_assign_all_busses() 1 #define PCIBIOS_MIN_IO 0x6000 #define PCIBIOS_MIN_MEM 0x00100000 +/* macro to get at IO space when running virtually */ +#ifdef CONFIG_MMU +#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) +#else +#define IO_ADDRESS(x) (x) +#endif + +#define __io_address(n) ((void __iomem *)IO_ADDRESS(n)) + #endif diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index e00a2624f269..5e6ea5cfea6e 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -23,9 +23,6 @@ * * Integrator address map * - * NOTE: This is a multi-hosted header file for use with uHAL and - * supported debuggers. - * * ***********************************************************************/ #ifndef __address_h @@ -290,12 +287,14 @@ #define INTEGRATOR_DBG_LEDS (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET) #define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET) +#define INTEGRATOR_AP_GPIO_BASE 0x1B000000 /* GPIO */ -#if defined(CONFIG_ARCH_INTEGRATOR_AP) -#define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */ -#elif defined(CONFIG_ARCH_INTEGRATOR_CP) -#define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */ -#endif +#define INTEGRATOR_CP_MMC_BASE 0x1C000000 /* MMC */ +#define INTEGRATOR_CP_AACI_BASE 0x1D000000 /* AACI */ +#define INTEGRATOR_CP_ETH_BASE 0xC8000000 /* Ethernet */ +#define INTEGRATOR_CP_GPIO_BASE 0xC9000000 /* GPIO */ +#define INTEGRATOR_CP_SIC_BASE 0xCA000000 /* SIC */ +#define INTEGRATOR_CP_CTL_BASE 0xCB000000 /* CP system control */ /* ------------------------------------------------------------------------ * KMI keyboard/mouse definitions @@ -328,20 +327,6 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 -#define PCI_DRAMSIZE INTEGRATOR_SSRAM_SIZE - -/* 'export' these to UHAL */ -#define UHAL_PCI_IO PCI_IO_BASE -#define UHAL_PCI_MEM PCI_MEM_BASE -#define UHAL_PCI_ALLOC_IO_BASE 0x00004000 -#define UHAL_PCI_ALLOC_MEM_BASE PCI_MEM_BASE -#define UHAL_PCI_MAX_SLOT 20 - -/* ======================================================================== - * Start of uHAL definitions - * ======================================================================== - */ - /* ------------------------------------------------------------------------ * Integrator Interrupt Controllers * ------------------------------------------------------------------------ @@ -389,7 +374,7 @@ */ /* ------------------------------------------------------------------------ - * LED's - The header LED is not accessible via the uHAL API + * LED's * ------------------------------------------------------------------------ * */ @@ -402,34 +387,18 @@ #define LED_BANK INTEGRATOR_DBG_LEDS /* - * Memory definitions - run uHAL out of SSRAM. - * - */ -#define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE - -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE INTEGRATOR_BOOT_ROM_HI - -/* * Timer definitions * * Only use timer 1 & 2 * (both run at 24MHz and will need the clock divider set to 16). * - * Timer 0 runs at bus frequency and therefore could vary and currently - * uHAL can't handle that. - * + * Timer 0 runs at bus frequency */ #define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE #define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) #define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 #define TICKS_PER_uSEC 24 /* @@ -437,14 +406,9 @@ * */ #define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) #define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) #define INTEGRATOR_CSR_BASE 0x10000000 #define INTEGRATOR_CSR_SIZE 0x10000000 #endif - -/* END */ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 8138a7e24562..227cf4d05088 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -27,9 +27,14 @@ #include <linux/sysdev.h> #include <linux/amba/bus.h> #include <linux/amba/kmi.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> +#include <asm/hardware/arm_timer.h> #include <asm/irq.h> #include <asm/setup.h> #include <asm/param.h> /* HZ */ @@ -43,8 +48,6 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include "common.h" - /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx * is the (PA >> 12). @@ -55,7 +58,7 @@ #define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) #define VA_SC_BASE IO_ADDRESS(INTEGRATOR_SC_BASE) #define VA_EBI_BASE IO_ADDRESS(INTEGRATOR_EBI_BASE) -#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_IC_OFFSET +#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_IC) /* * Logical Physical @@ -117,8 +120,8 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .virtual = IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE), .length = SZ_4K, .type = MT_DEVICE }, { @@ -334,14 +337,163 @@ static void __init ap_init(void) } } +/* + * Where is the timer (VA)? + */ +#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE) +#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE) +#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE) + +/* + * How long is the timer interval? + */ +#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) +#if TIMER_INTERVAL >= 0x100000 +#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) +#elif TIMER_INTERVAL >= 0x10000 +#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) +#else +#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) +#endif + +static unsigned long timer_reload; + +static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE; + +static cycle_t timersp_read(struct clocksource *cs) +{ + return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff); +} + +static struct clocksource clocksource_timersp = { + .name = "timer2", + .rating = 200, + .read = timersp_read, + .mask = CLOCKSOURCE_MASK(16), + .shift = 16, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void integrator_clocksource_init(u32 khz) +{ + struct clocksource *cs = &clocksource_timersp; + void __iomem *base = clksrc_base; + u32 ctrl = TIMER_CTRL_ENABLE; + + if (khz >= 1500) { + khz /= 16; + ctrl = TIMER_CTRL_DIV16; + } + + writel(ctrl, base + TIMER_CTRL); + writel(0xffff, base + TIMER_LOAD); + + cs->mult = clocksource_khz2mult(khz, cs->shift); + clocksource_register(cs); +} + +static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE; + +/* + * IRQ handler for the timer + */ +static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* clear the interrupt */ + writel(1, clkevt_base + TIMER_INTCLR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) +{ + u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; + + BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT); + + if (mode == CLOCK_EVT_MODE_PERIODIC) { + writel(ctrl, clkevt_base + TIMER_CTRL); + writel(timer_reload, clkevt_base + TIMER_LOAD); + ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + } + + writel(ctrl, clkevt_base + TIMER_CTRL); +} + +static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) +{ + unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); + + writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + writel(next, clkevt_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + + return 0; +} + +static struct clock_event_device integrator_clockevent = { + .name = "timer1", + .shift = 34, + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = clkevt_set_mode, + .set_next_event = clkevt_set_next_event, + .rating = 300, + .cpumask = cpu_all_mask, +}; + +static struct irqaction integrator_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = integrator_timer_interrupt, + .dev_id = &integrator_clockevent, +}; + +static void integrator_clockevent_init(u32 khz) +{ + struct clock_event_device *evt = &integrator_clockevent; + unsigned int ctrl = 0; + + if (khz * 1000 > 0x100000 * HZ) { + khz /= 256; + ctrl |= TIMER_CTRL_DIV256; + } else if (khz * 1000 > 0x10000 * HZ) { + khz /= 16; + ctrl |= TIMER_CTRL_DIV16; + } + + timer_reload = khz * 1000 / HZ; + writel(ctrl, clkevt_base + TIMER_CTRL); + + evt->irq = IRQ_TIMERINT1; + evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(0xffff, evt); + evt->min_delta_ns = clockevent_delta2ns(0xf, evt); + + setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); + clockevents_register_device(evt); +} + +/* + * Set up timer(s). + */ static void __init ap_init_timer(void) { - integrator_time_init(1000000 * TICKS_PER_uSEC / HZ, 0); + u32 khz = TICKS_PER_uSEC * 1000; + + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + + integrator_clocksource_init(khz); + integrator_clockevent_init(khz); } static struct sys_timer ap_timer = { .init = ap_init_timer, - .offset = integrator_gettimeoffset, }; MACHINE_START(INTEGRATOR, "ARM-Integrator") diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 66ef86d6d9e3..54edb6b8504f 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -25,10 +25,12 @@ #include <asm/clkdev.h> #include <mach/clkdev.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/irq.h> #include <asm/setup.h> #include <asm/mach-types.h> -#include <asm/hardware/icst525.h> +#include <asm/hardware/arm_timer.h> +#include <asm/hardware/icst.h> #include <mach/cm.h> #include <mach/lm.h> @@ -39,24 +41,20 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include "common.h" - -#define INTCP_PA_MMC_BASE 0x1c000000 -#define INTCP_PA_AACI_BASE 0x1d000000 +#include <plat/timer-sp.h> #define INTCP_PA_FLASH_BASE 0x24000000 #define INTCP_FLASH_SIZE SZ_32M #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40 +#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40) #define INTCP_VA_PIC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE IO_ADDRESS(0xca000000) +#define INTCP_VA_SIC_BASE IO_ADDRESS(INTEGRATOR_CP_SIC_BASE) -#define INTCP_PA_ETH_BASE 0xc8000000 #define INTCP_ETH_SIZE 0x10 -#define INTCP_VA_CTRL_BASE IO_ADDRESS(0xcb000000) +#define INTCP_VA_CTRL_BASE IO_ADDRESS(INTEGRATOR_CP_CTL_BASE) #define INTCP_FLASHPROG 0x04 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0) #define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1) @@ -71,7 +69,9 @@ * f1600000 16000000 UART 0 * f1700000 17000000 UART 1 * f1a00000 1a000000 Debug LEDs - * f1b00000 1b000000 GPIO + * fc900000 c9000000 GPIO + * fca00000 ca000000 SIC + * fcb00000 cb000000 CP system control */ static struct map_desc intcp_io_desc[] __initdata = { @@ -116,18 +116,18 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .virtual = IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE), .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(0xca000000), - .pfn = __phys_to_pfn(0xca000000), + .virtual = IO_ADDRESS(INTEGRATOR_CP_SIC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE), .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(0xcb000000), - .pfn = __phys_to_pfn(0xcb000000), + .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), .length = SZ_4K, .type = MT_DEVICE } @@ -266,33 +266,43 @@ static void __init intcp_init_irq(void) /* * Clock handling */ -#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) -#define CM_AUXOSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+0x1c) +#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) +#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c) -static const struct icst525_params cp_auxvco_params = { - .ref = 24000, - .vco_max = 320000, +static const struct icst_params cp_auxvco_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, .vd_min = 8, .vd_max = 263, .rd_min = 3, .rd_max = 65, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; -static void cp_auxvco_set(struct clk *clk, struct icst525_vco vco) +static void cp_auxvco_set(struct clk *clk, struct icst_vco vco) { u32 val; - val = readl(CM_AUXOSC) & ~0x7ffff; + val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, CM_LOCK); - writel(val, CM_AUXOSC); + writel(val, clk->vcoreg); writel(0, CM_LOCK); } +static const struct clk_ops cp_auxclk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = cp_auxvco_set, +}; + static struct clk cp_auxclk = { + .ops = &cp_auxclk_ops, .params = &cp_auxvco_params, - .setvco = cp_auxvco_set, + .vcoreg = CM_AUXOSC, }; static struct clk_lookup cp_lookups[] = { @@ -363,8 +373,8 @@ static struct platform_device intcp_flash_device = { static struct resource smc91x_resources[] = { [0] = { - .start = INTCP_PA_ETH_BASE, - .end = INTCP_PA_ETH_BASE + INTCP_ETH_SIZE - 1, + .start = INTEGRATOR_CP_ETH_BASE, + .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -394,8 +404,8 @@ static struct platform_device *intcp_devs[] __initdata = { */ static unsigned int mmc_status(struct device *dev) { - unsigned int status = readl(IO_ADDRESS(0xca000000) + 4); - writel(8, IO_ADDRESS(0xcb000000) + 8); + unsigned int status = readl(IO_ADDRESS(0xca000000 + 4)); + writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8)); return status & 8; } @@ -413,8 +423,8 @@ static struct amba_device mmc_device = { .platform_data = &mmc_data, }, .res = { - .start = INTCP_PA_MMC_BASE, - .end = INTCP_PA_MMC_BASE + SZ_4K - 1, + .start = INTEGRATOR_CP_MMC_BASE, + .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }, @@ -426,8 +436,8 @@ static struct amba_device aaci_device = { .init_name = "mb:1d", }, .res = { - .start = INTCP_PA_AACI_BASE, - .end = INTCP_PA_AACI_BASE + SZ_4K - 1, + .start = INTEGRATOR_CP_AACI_BASE, + .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, .irq = { IRQ_CP_AACIINT, NO_IRQ }, @@ -567,16 +577,22 @@ static void __init intcp_init(void) } } -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */ +#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) +#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE) +#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE) static void __init intcp_timer_init(void) { - integrator_time_init(1000000 / HZ, TIMER_CTRL_IE); + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + + sp804_clocksource_init(TIMER2_VA_BASE); + sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1); } static struct sys_timer cp_timer = { .init = intcp_timer_init, - .offset = integrator_gettimeoffset, }; MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index 8dcc823f4135..28be186adb89 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/leds.h> #include <asm/system.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 148d25fc636f..e5491629c6da 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -30,6 +30,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/irq.h> #include <asm/signal.h> #include <asm/system.h> @@ -390,9 +391,9 @@ static int __init pci_v3_setup_resources(struct resource **resource) * means I can't get additional information on the reason for the pm2fb * problems. I suppose I'll just have to mind-meld with the machine. ;) */ -#define SC_PCI (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_PCIENABLE_OFFSET) -#define SC_LBFADDR (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x20) -#define SC_LBFCODE (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x24) +#define SC_PCI IO_ADDRESS(INTEGRATOR_SC_PCIENABLE) +#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20) +#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24) static int v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 91e6f5c95dc1..86bad4f0dc7b 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -2,8 +2,9 @@ obj-y += io.o idle.o irq.o timer.o dma.o obj-y += devices.o obj-y += proc_comm.o obj-y += vreg.o +obj-y += acpuclock-arm11.o obj-y += clock.o clock-7x01a.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o -obj-$(CONFIG_MACH_TROUT) += board-dream.o +obj-$(CONFIG_MACH_TROUT) += board-trout.o diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c new file mode 100644 index 000000000000..af5e85b91d02 --- /dev/null +++ b/arch/arm/mach-msm/acpuclock-arm11.c @@ -0,0 +1,526 @@ +/* arch/arm/mach-msm/acpuclock.c + * + * MSM architecture clock driver + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2007 QUALCOMM Incorporated + * Author: San Mehat <san@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/mutex.h> +#include <linux/io.h> +#include <mach/board.h> +#include <mach/msm_iomap.h> + +#include "proc_comm.h" +#include "acpuclock.h" + + +#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100) +#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104) +#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124) + +/* + * ARM11 clock configuration for specific ACPU speeds + */ + +#define ACPU_PLL_TCXO -1 +#define ACPU_PLL_0 0 +#define ACPU_PLL_1 1 +#define ACPU_PLL_2 2 +#define ACPU_PLL_3 3 + +#define PERF_SWITCH_DEBUG 0 +#define PERF_SWITCH_STEP_DEBUG 0 + +struct clock_state +{ + struct clkctl_acpu_speed *current_speed; + struct mutex lock; + uint32_t acpu_switch_time_us; + uint32_t max_speed_delta_khz; + uint32_t vdd_switch_time_us; + unsigned long power_collapse_khz; + unsigned long wait_for_irq_khz; +}; + +static struct clk *ebi1_clk; +static struct clock_state drv_state = { 0 }; + +static void __init acpuclk_init(void); + +/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */ +enum { + VDD_0 = 0, + VDD_1 = 1, + VDD_2 = 2, + VDD_3 = 3, + VDD_4 = 3, + VDD_5 = 3, + VDD_6 = 3, + VDD_7 = 7, + VDD_END +}; + +struct clkctl_acpu_speed { + unsigned int a11clk_khz; + int pll; + unsigned int a11clk_src_sel; + unsigned int a11clk_src_div; + unsigned int ahbclk_khz; + unsigned int ahbclk_div; + int vdd; + unsigned int axiclk_khz; + unsigned long lpj; /* loops_per_jiffy */ +/* Index in acpu_freq_tbl[] for steppings. */ + short down; + short up; +}; + +/* + * ACPU speed table. Complete table is shown but certain speeds are commented + * out to optimized speed switching. Initalize loops_per_jiffy to 0. + * + * Table stepping up/down is optimized for 256mhz jumps while staying on the + * same PLL. + */ +#if (0) +static struct clkctl_acpu_speed acpu_freq_tbl[] = { + { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 }, + { 61440, ACPU_PLL_0, 4, 3, 61440, 0, VDD_0, 30720, 0, 0, 8 }, + { 81920, ACPU_PLL_0, 4, 2, 40960, 1, VDD_0, 61440, 0, 0, 8 }, + { 96000, ACPU_PLL_1, 1, 7, 48000, 1, VDD_0, 61440, 0, 0, 9 }, + { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 8 }, + { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 12 }, + { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 11 }, + { 192000, ACPU_PLL_1, 1, 3, 64000, 2, VDD_3, 61440, 0, 0, 12 }, + { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 12 }, + { 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 }, + { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_5, 128000, 0, 6, 13 }, + { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 6, 13 }, + { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 }, + { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 }, + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, +}; +#else /* Table of freq we currently use. */ +static struct clkctl_acpu_speed acpu_freq_tbl[] = { + { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 }, + { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 }, + { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 }, + { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 }, + { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 }, + { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 }, + { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 }, + { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 }, + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, +}; +#endif + + +#ifdef CONFIG_CPU_FREQ_TABLE +static struct cpufreq_frequency_table freq_table[] = { + { 0, 122880 }, + { 1, 128000 }, + { 2, 245760 }, + { 3, 384000 }, + { 4, 528000 }, + { 5, CPUFREQ_TABLE_END }, +}; +#endif + +static int pc_pll_request(unsigned id, unsigned on) +{ + int res; + on = !!on; + +#if PERF_SWITCH_DEBUG + if (on) + printk(KERN_DEBUG "Enabling PLL %d\n", id); + else + printk(KERN_DEBUG "Disabling PLL %d\n", id); +#endif + + res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on); + if (res < 0) + return res; + +#if PERF_SWITCH_DEBUG + if (on) + printk(KERN_DEBUG "PLL %d enabled\n", id); + else + printk(KERN_DEBUG "PLL %d disabled\n", id); +#endif + return res; +} + + +/*---------------------------------------------------------------------------- + * ARM11 'owned' clock control + *---------------------------------------------------------------------------*/ + +unsigned long acpuclk_power_collapse(void) { + int ret = acpuclk_get_rate(); + ret *= 1000; + if (ret > drv_state.power_collapse_khz) + acpuclk_set_rate(drv_state.power_collapse_khz, 1); + return ret; +} + +unsigned long acpuclk_get_wfi_rate(void) +{ + return drv_state.wait_for_irq_khz; +} + +unsigned long acpuclk_wait_for_irq(void) { + int ret = acpuclk_get_rate(); + ret *= 1000; + if (ret > drv_state.wait_for_irq_khz) + acpuclk_set_rate(drv_state.wait_for_irq_khz, 1); + return ret; +} + +static int acpuclk_set_vdd_level(int vdd) +{ + uint32_t current_vdd; + + current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07; + +#if PERF_SWITCH_DEBUG + printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n", + current_vdd, vdd); +#endif + writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR); + udelay(drv_state.vdd_switch_time_us); + if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) { +#if PERF_SWITCH_DEBUG + printk(KERN_ERR "acpuclock: VDD set failed\n"); +#endif + return -EIO; + } + +#if PERF_SWITCH_DEBUG + printk(KERN_DEBUG "acpuclock: VDD switched\n"); +#endif + return 0; +} + +/* Set proper dividers for the given clock speed. */ +static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) { + uint32_t reg_clkctl, reg_clksel, clk_div; + + /* AHB_CLK_DIV */ + clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03; + /* + * If the new clock divider is higher than the previous, then + * program the divider before switching the clock + */ + if (hunt_s->ahbclk_div > clk_div) { + reg_clksel = readl(A11S_CLK_SEL_ADDR); + reg_clksel &= ~(0x3 << 1); + reg_clksel |= (hunt_s->ahbclk_div << 1); + writel(reg_clksel, A11S_CLK_SEL_ADDR); + } + if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) { + /* SRC0 */ + + /* Program clock source */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl &= ~(0x07 << 4); + reg_clkctl |= (hunt_s->a11clk_src_sel << 4); + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + + /* Program clock divider */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl &= ~0xf; + reg_clkctl |= hunt_s->a11clk_src_div; + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + + /* Program clock source selection */ + reg_clksel = readl(A11S_CLK_SEL_ADDR); + reg_clksel |= 1; /* CLK_SEL_SRC1NO == SRC1 */ + writel(reg_clksel, A11S_CLK_SEL_ADDR); + } else { + /* SRC1 */ + + /* Program clock source */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl &= ~(0x07 << 12); + reg_clkctl |= (hunt_s->a11clk_src_sel << 12); + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + + /* Program clock divider */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl &= ~(0xf << 8); + reg_clkctl |= (hunt_s->a11clk_src_div << 8); + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + + /* Program clock source selection */ + reg_clksel = readl(A11S_CLK_SEL_ADDR); + reg_clksel &= ~1; /* CLK_SEL_SRC1NO == SRC0 */ + writel(reg_clksel, A11S_CLK_SEL_ADDR); + } + + /* + * If the new clock divider is lower than the previous, then + * program the divider after switching the clock + */ + if (hunt_s->ahbclk_div < clk_div) { + reg_clksel = readl(A11S_CLK_SEL_ADDR); + reg_clksel &= ~(0x3 << 1); + reg_clksel |= (hunt_s->ahbclk_div << 1); + writel(reg_clksel, A11S_CLK_SEL_ADDR); + } +} + +int acpuclk_set_rate(unsigned long rate, int for_power_collapse) +{ + uint32_t reg_clkctl; + struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s; + int rc = 0; + unsigned int plls_enabled = 0, pll; + + strt_s = cur_s = drv_state.current_speed; + + WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n"); + if (cur_s == NULL) + return -ENOENT; + + if (rate == (cur_s->a11clk_khz * 1000)) + return 0; + + for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) { + if (tgt_s->a11clk_khz == (rate / 1000)) + break; + } + + if (tgt_s->a11clk_khz == 0) + return -EINVAL; + + /* Choose the highest speed speed at or below 'rate' with same PLL. */ + if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) { + while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll) + tgt_s--; + } + + if (strt_s->pll != ACPU_PLL_TCXO) + plls_enabled |= 1 << strt_s->pll; + + if (!for_power_collapse) { + mutex_lock(&drv_state.lock); + if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) { + rc = pc_pll_request(tgt_s->pll, 1); + if (rc < 0) { + pr_err("PLL%d enable failed (%d)\n", + tgt_s->pll, rc); + goto out; + } + plls_enabled |= 1 << tgt_s->pll; + } + /* Increase VDD if needed. */ + if (tgt_s->vdd > cur_s->vdd) { + if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) { + printk(KERN_ERR "Unable to switch ACPU vdd\n"); + goto out; + } + } + } + + /* Set wait states for CPU inbetween frequency changes */ + reg_clkctl = readl(A11S_CLK_CNTL_ADDR); + reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ + writel(reg_clkctl, A11S_CLK_CNTL_ADDR); + +#if PERF_SWITCH_DEBUG + printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n", + strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000); +#endif + + while (cur_s != tgt_s) { + /* + * Always jump to target freq if within 256mhz, regulardless of + * PLL. If differnece is greater, use the predefinied + * steppings in the table. + */ + int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz)); + if (d > drv_state.max_speed_delta_khz) { + /* Step up or down depending on target vs current. */ + int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ? + cur_s->up : cur_s->down; + if (clk_index < 0) { /* This should not happen. */ + printk(KERN_ERR "cur:%u target: %u\n", + cur_s->a11clk_khz, tgt_s->a11clk_khz); + rc = -EINVAL; + goto out; + } + cur_s = &acpu_freq_tbl[clk_index]; + } else { + cur_s = tgt_s; + } +#if PERF_SWITCH_STEP_DEBUG + printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n", + __FUNCTION__, cur_s->a11clk_khz, cur_s->pll); +#endif + if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO + && !(plls_enabled & (1 << cur_s->pll))) { + rc = pc_pll_request(cur_s->pll, 1); + if (rc < 0) { + pr_err("PLL%d enable failed (%d)\n", + cur_s->pll, rc); + goto out; + } + plls_enabled |= 1 << cur_s->pll; + } + + acpuclk_set_div(cur_s); + drv_state.current_speed = cur_s; + /* Re-adjust lpj for the new clock speed. */ + loops_per_jiffy = cur_s->lpj; + udelay(drv_state.acpu_switch_time_us); + } + + /* Nothing else to do for power collapse. */ + if (for_power_collapse) + return 0; + + /* Disable PLLs we are not using anymore. */ + plls_enabled &= ~(1 << tgt_s->pll); + for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++) + if (plls_enabled & (1 << pll)) { + rc = pc_pll_request(pll, 0); + if (rc < 0) { + pr_err("PLL%d disable failed (%d)\n", pll, rc); + goto out; + } + } + + /* Change the AXI bus frequency if we can. */ + if (strt_s->axiclk_khz != tgt_s->axiclk_khz) { + rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000); + if (rc < 0) + pr_err("Setting AXI min rate failed!\n"); + } + + /* Drop VDD level if we can. */ + if (tgt_s->vdd < strt_s->vdd) { + if (acpuclk_set_vdd_level(tgt_s->vdd) < 0) + printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n"); + } + +#if PERF_SWITCH_DEBUG + printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__); +#endif +out: + if (!for_power_collapse) + mutex_unlock(&drv_state.lock); + return rc; +} + +static void __init acpuclk_init(void) +{ + struct clkctl_acpu_speed *speed; + uint32_t div, sel; + int rc; + + /* + * Determine the rate of ACPU clock + */ + + if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */ + /* CLK_SRC0_SEL */ + sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7; + /* CLK_SRC0_DIV */ + div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f; + } else { + /* CLK_SRC1_SEL */ + sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07; + /* CLK_SRC1_DIV */ + div = readl(A11S_CLK_CNTL_ADDR) & 0x0f; + } + + for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) { + if (speed->a11clk_src_sel == sel + && (speed->a11clk_src_div == div)) + break; + } + if (speed->a11clk_khz == 0) { + printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n"); + return; + } + + drv_state.current_speed = speed; + + rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000); + if (rc < 0) + pr_err("Setting AXI min rate failed!\n"); + + printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz); +} + +unsigned long acpuclk_get_rate(void) +{ + WARN_ONCE(drv_state.current_speed == NULL, + "acpuclk_get_rate: not initialized\n"); + if (drv_state.current_speed) + return drv_state.current_speed->a11clk_khz; + else + return 0; +} + +uint32_t acpuclk_get_switch_time(void) +{ + return drv_state.acpu_switch_time_us; +} + +/*---------------------------------------------------------------------------- + * Clock driver initialization + *---------------------------------------------------------------------------*/ + +/* Initalize the lpj field in the acpu_freq_tbl. */ +static void __init lpj_init(void) +{ + int i; + const struct clkctl_acpu_speed *base_clk = drv_state.current_speed; + for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) { + acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy, + base_clk->a11clk_khz, + acpu_freq_tbl[i].a11clk_khz); + } +} + +void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata) +{ + pr_info("acpu_clock_init()\n"); + + ebi1_clk = clk_get(NULL, "ebi1_clk"); + + mutex_init(&drv_state.lock); + drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us; + drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz; + drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us; + drv_state.power_collapse_khz = clkdata->power_collapse_khz; + drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz; + acpuclk_init(); + lpj_init(); +#ifdef CONFIG_CPU_FREQ_TABLE + cpufreq_frequency_table_get_attr(freq_table, smp_processor_id()); +#endif +} diff --git a/arch/arm/mach-msm/acpuclock.h b/arch/arm/mach-msm/acpuclock.h new file mode 100644 index 000000000000..415de2eb9a5e --- /dev/null +++ b/arch/arm/mach-msm/acpuclock.h @@ -0,0 +1,32 @@ +/* arch/arm/mach-msm/acpuclock.h + * + * MSM architecture clock driver header + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2007 QUALCOMM Incorporated + * Author: San Mehat <san@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H +#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H + +int acpuclk_set_rate(unsigned long rate, int for_power_collapse); +unsigned long acpuclk_get_rate(void); +uint32_t acpuclk_get_switch_time(void); +unsigned long acpuclk_wait_for_irq(void); +unsigned long acpuclk_power_collapse(void); +unsigned long acpuclk_get_wfi_rate(void); + + +#endif + diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index e61967dde9a1..acc22886e340 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -26,6 +26,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> +#include <asm/setup.h> #include <mach/irqs.h> #include <mach/board.h> @@ -77,6 +78,15 @@ static void __init halibut_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); } +static void __init halibut_fixup(struct machine_desc *desc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + mi->nr_banks=1; + mi->bank[0].start = PHYS_OFFSET; + mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); + mi->bank[0].size = (101*1024*1024); +} + static void __init halibut_map_io(void) { msm_map_common_io(); @@ -84,7 +94,12 @@ static void __init halibut_map_io(void) } MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif .boot_params = 0x10000100, + .fixup = halibut_fixup, .map_io = halibut_map_io, .init_irq = halibut_init_irq, .init_machine = halibut_init, diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c new file mode 100644 index 000000000000..bcbefdfe7b5e --- /dev/null +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -0,0 +1,87 @@ +/* linux/arch/arm/mach-msm/board-mahimahi.c + * + * Copyright (C) 2009 Google, Inc. + * Copyright (C) 2009 HTC Corporation. + * Author: Dima Zavin <dima@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> + +#include <mach/board.h> +#include <mach/hardware.h> +#include <mach/system.h> + +#include "board-mahimahi.h" +#include "devices.h" +#include "proc_comm.h" + +static uint debug_uart; + +module_param_named(debug_uart, debug_uart, uint, 0); + +static struct platform_device *devices[] __initdata = { +#if !defined(CONFIG_MSM_SERIAL_DEBUGGER) + &msm_device_uart1, +#endif + &msm_device_uart_dm1, + &msm_device_nand, +}; + +static void __init mahimahi_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init mahimahi_fixup(struct machine_desc *desc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + mi->nr_banks = 2; + mi->bank[0].start = PHYS_OFFSET; + mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); + mi->bank[0].size = (219*1024*1024); + mi->bank[1].start = MSM_HIGHMEM_BASE; + mi->bank[1].node = PHYS_TO_NID(MSM_HIGHMEM_BASE); + mi->bank[1].size = MSM_HIGHMEM_SIZE; +} + +static void __init mahimahi_map_io(void) +{ + msm_map_common_io(); + msm_clock_init(); +} + +extern struct sys_timer msm_timer; + +MACHINE_START(MAHIMAHI, "mahimahi") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = 0x20000100, + .fixup = mahimahi_fixup, + .map_io = mahimahi_map_io, + .init_irq = msm_init_irq, + .init_machine = mahimahi_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c new file mode 100644 index 000000000000..cccb9f3c9d01 --- /dev/null +++ b/arch/arm/mach-msm/board-msm7x27.c @@ -0,0 +1,179 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/power_supply.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> +#include <asm/setup.h> +#ifdef CONFIG_CACHE_L2X0 +#include <asm/hardware/cache-l2x0.h> +#endif + +#include <mach/vreg.h> +#include <mach/mpp.h> +#include <mach/gpio.h> +#include <mach/board.h> +#include <mach/msm_iomap.h> + +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#include "devices.h" +#include "socinfo.h" +#include "clock.h" + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x9C004300, + .end = 0x9C0043ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSM_GPIO_TO_INT(132), + .end = MSM_GPIO_TO_INT(132), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device *devices[] __initdata = { + &msm_device_uart3, + &msm_device_smd, + &msm_device_dmov, + &msm_device_nand, + &smc91x_device, +}; + +extern struct sys_timer msm_timer; + +static void __init msm7x2x_init_irq(void) +{ + msm_init_irq(); +} + +static void __init msm7x2x_init(void) +{ + if (socinfo_init() < 0) + BUG(); + + if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) { + smc91x_resources[0].start = 0x98000300; + smc91x_resources[0].end = 0x980003ff; + smc91x_resources[1].start = MSM_GPIO_TO_INT(85); + smc91x_resources[1].end = MSM_GPIO_TO_INT(85); + if (gpio_tlmm_config(GPIO_CFG(85, 0, + GPIO_INPUT, + GPIO_PULL_DOWN, + GPIO_2MA), + GPIO_ENABLE)) { + printk(KERN_ERR + "%s: Err: Config GPIO-85 INT\n", + __func__); + } + } + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init msm7x2x_map_io(void) +{ + msm_map_common_io(); + /* Technically dependent on the SoC but using machine_is + * macros since socinfo is not available this early and there + * are plans to restructure the code which will eliminate the + * need for socinfo. + */ + if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) + msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27); + + if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa()) + msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25); + +#ifdef CONFIG_CACHE_L2X0 + if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) { + /* 7x27 has 256KB L2 cache: + 64Kb/Way and 4-Way Associativity; + R/W latency: 3 cycles; + evmon/parity/share disabled. */ + l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000); + } +#endif +} + +MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = msm7x2x_map_io, + .init_irq = msm7x2x_init_irq, + .init_machine = msm7x2x_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = msm7x2x_map_io, + .init_irq = msm7x2x_init_irq, + .init_machine = msm7x2x_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = msm7x2x_map_io, + .init_irq = msm7x2x_init_irq, + .init_machine = msm7x2x_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = msm7x2x_map_io, + .init_irq = msm7x2x_init_irq, + .init_machine = msm7x2x_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c new file mode 100644 index 000000000000..af132ebd86c5 --- /dev/null +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -0,0 +1,196 @@ +/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/io.h> +#include <linux/smsc911x.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/setup.h> + +#include <mach/gpio.h> +#include <mach/board.h> +#include <mach/camera.h> +#include <mach/memory.h> +#include <mach/msm_iomap.h> +#include <mach/msm_hsusb.h> +#include <mach/dma.h> + +#include <mach/vreg.h> + +#include "devices.h" +#include "timer.h" +#include "socinfo.h" + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x8A000300, + .end = 0x8A0003ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSM_GPIO_TO_INT(156), + .end = MSM_GPIO_TO_INT(156), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = 0x8D000000, + .end = 0x8D000100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSM_GPIO_TO_INT(88), + .end = MSM_GPIO_TO_INT(88), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct msm_gpio smsc911x_gpios[] = { + { GPIO_CFG(172, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr6" }, + { GPIO_CFG(173, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr5" }, + { GPIO_CFG(174, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr4" }, + { GPIO_CFG(175, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr3" }, + { GPIO_CFG(176, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr2" }, + { GPIO_CFG(177, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr1" }, + { GPIO_CFG(178, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr0" }, + { GPIO_CFG(88, 2, GPIO_INPUT, GPIO_PULL_UP, GPIO_2MA), "smsc911x_irq" }, +}; + +static void msm7x30_cfg_smsc911x(void) +{ + int rc; + + rc = msm_gpios_request_enable(smsc911x_gpios, + ARRAY_SIZE(smsc911x_gpios)); + if (rc) + pr_err("%s: unable to enable gpios\n", __func__); +} + +static struct platform_device *devices[] __initdata = { + &msm_device_smd, + &msm_device_dmov, + &smc91x_device, + &smsc911x_device, + &msm_device_nand, + &msm_device_uart_dm1, +}; + +static void __init msm7x30_init_irq(void) +{ + msm_init_irq(); +} + +static void __init msm_7x30_init_nand(void) +{ + int rc; + /* Enable GPIO 86 & 115 */ + rc = msm_gpios_request_enable(msm_nand_ebi2_cfg_data, + ARRAY_SIZE(msm_nand_ebi2_cfg_data)); + if (rc) + printk(KERN_ERR "%s: Failed to enable GPIO 86 & 115\n", + __func__); +} + +static void __init msm7x30_init(void) +{ + if (socinfo_init() < 0) + printk(KERN_ERR "%s: socinfo_init() failed!\n", + __func__); + msm_acpu_clock_init(&msm7x30_clock_data); + if (machine_is_msm7x30_surf() || machine_is_msm7x30_fluid()) + msm7x30_cfg_smsc911x(); + platform_add_devices(devices, ARRAY_SIZE(devices)); + msm_7x30_init_nand(); + buses_init(); +} + +static void __init msm7x30_map_io(void) +{ + msm_shared_ram_phys = 0x00000000; + msm_map_msm7x30_io(); + msm7x30_allocate_memory_regions(); + msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30); +} + +MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = msm7x30_map_io, + .init_irq = msm7x30_init_irq, + .init_machine = msm7x30_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = msm7x30_map_io, + .init_irq = msm7x30_init_irq, + .init_machine = msm7x30_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = msm7x30_map_io, + .init_irq = msm7x30_init_irq, + .init_machine = msm7x30_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c new file mode 100644 index 000000000000..a5e862c6ef7b --- /dev/null +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -0,0 +1,176 @@ +/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/bootmem.h> +#include <linux/delay.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/io.h> +#include <asm/setup.h> + +#include <mach/vreg.h> +#include <mach/mpp.h> +#include <mach/gpio.h> +#include <mach/board.h> +#include <mach/dma.h> +#include <mach/memory.h> + +#include "devices.h" +#include "timer.h" +#include "socinfo.h" +#include "proc_comm.h" + +#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000) + +static struct resource smc91x_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device *devices[] __initdata = { + &smc91x_device, + &msm_device_smd, + &msm_device_dmov, + &msm_device_nand, +}; + +static void __init qsd8x50_init_irq(void) +{ + msm_init_irq(); +} + +static void __init qsd8x50_init_host(void) +{ + if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) + return; + + vreg_usb = vreg_get(NULL, "boost"); + + if (IS_ERR(vreg_usb)) { + printk(KERN_ERR "%s: vreg get failed (%ld)\n", + __func__, PTR_ERR(vreg_usb)); + return; + } + + platform_device_register(&msm_device_hsusb_otg); +} + +static void __init qsd8x50_cfg_smc91x(void) +{ + int rc = 0; + + if (machine_is_qsd8x50_surf() || machine_is_qsd8x50a_surf()) { + smc91x_resources[0].start = 0x70000300; + smc91x_resources[0].end = 0x700003ff; + smc91x_resources[1].start = MSM_GPIO_TO_INT(156); + smc91x_resources[1].end = MSM_GPIO_TO_INT(156); + } else if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) { + smc91x_resources[0].start = 0x84000300; + smc91x_resources[0].end = 0x840003ff; + smc91x_resources[1].start = MSM_GPIO_TO_INT(87); + smc91x_resources[1].end = MSM_GPIO_TO_INT(87); + + rc = gpio_tlmm_config(GPIO_CFG(87, 0, GPIO_INPUT, + GPIO_PULL_DOWN, GPIO_2MA), + GPIO_ENABLE); + if (rc) { + printk(KERN_ERR "%s: gpio_tlmm_config=%d\n", + __func__, rc); + } + } else + printk(KERN_ERR "%s: invalid machine type\n", __func__); +} + +static void __init qsd8x50_init(void) +{ + if (socinfo_init() < 0) + printk(KERN_ERR "%s: socinfo_init() failed!\n", + __func__); + qsd8x50_cfg_smc91x(); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init qsd8x50_map_io(void) +{ + msm_shared_ram_phys = MSM_SHARED_RAM_PHYS; + msm_map_qsd8x50_io(); + msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50); +} + +MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = qsd8x50_map_io, + .init_irq = qsd8x50_init_irq, + .init_machine = qsd8x50_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(QSD8X50_FFA, "QCT QSD8X50 FFA") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = qsd8x50_map_io, + .init_irq = qsd8x50_init_irq, + .init_machine = qsd8x50_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(QSD8X50A_SURF, "QCT QSD8X50A SURF") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = qsd8x50_map_io, + .init_irq = qsd8x50_init_irq, + .init_machine = qsd8x50_init, + .timer = &msm_timer, +MACHINE_END + +MACHINE_START(QSD8X50A_FFA, "QCT QSD8X50A FFA") +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .map_io = qsd8x50_map_io, + .init_irq = qsd8x50_init_irq, + .init_machine = qsd8x50_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c new file mode 100644 index 000000000000..2bc1b9d5623e --- /dev/null +++ b/arch/arm/mach-msm/board-sapphire.c @@ -0,0 +1,118 @@ +/* linux/arch/arm/mach-msm/board-sapphire.c + * Copyright (C) 2007-2009 HTC Corporation. + * Author: Thomas Tsai <thomas_tsai@htc.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/sysdev.h> + +#include <linux/delay.h> + +#include <asm/gpio.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> +#include <asm/system.h> +#include <mach/system.h> +#include <mach/vreg.h> +#include <mach/board.h> + +#include <asm/io.h> +#include <asm/delay.h> +#include <asm/setup.h> + +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#include "gpio_chip.h" +#include "board-sapphire.h" +#include "proc_comm.h" +#include "devices.h" + +void msm_init_irq(void); +void msm_init_gpio(void); + +static struct platform_device *devices[] __initdata = { + &msm_device_smd, + &msm_device_dmov, + &msm_device_nand, + &msm_device_uart1, + &msm_device_uart3, +}; + +extern struct sys_timer msm_timer; + +static void __init sapphire_init_irq(void) +{ + msm_init_irq(); +} + +static void __init sapphire_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static struct map_desc sapphire_io_desc[] __initdata = { + { + .virtual = SAPPHIRE_CPLD_BASE, + .pfn = __phys_to_pfn(SAPPHIRE_CPLD_START), + .length = SAPPHIRE_CPLD_SIZE, + .type = MT_DEVICE_NONSHARED + } +}; + +static void __init sapphire_fixup(struct machine_desc *desc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + int smi_sz = parse_tag_smi((const struct tag *)tags); + + mi->nr_banks = 1; + mi->bank[0].start = PHYS_OFFSET; + mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); + if (smi_sz == 32) { + mi->bank[0].size = (84*1024*1024); + } else if (smi_sz == 64) { + mi->bank[0].size = (101*1024*1024); + } else { + /* Give a default value when not get smi size */ + smi_sz = 64; + mi->bank[0].size = (101*1024*1024); + } +} + +static void __init sapphire_map_io(void) +{ + msm_map_common_io(); + iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc)); + msm_clock_init(); +} + +MACHINE_START(SAPPHIRE, "sapphire") +/* Maintainer: Brian Swetland <swetland@google.com> */ +#ifdef CONFIG_MSM_DEBUG_UART + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, +#endif + .boot_params = PHYS_OFFSET + 0x100, + .fixup = sapphire_fixup, + .map_io = sapphire_map_io, + .init_irq = sapphire_init_irq, + .init_machine = sapphire_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/board-dream.c b/arch/arm/mach-msm/board-trout.c index 21afa8513168..9793ff45deb4 100644 --- a/arch/arm/mach-msm/board-dream.c +++ b/arch/arm/mach-msm/board-trout.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-msm/board-dream.c +/* linux/arch/arm/mach-msm/board-trout.c * * Copyright (C) 2009 Google, Inc. * Author: Brian Swetland <swetland@google.com> @@ -28,7 +28,7 @@ #include <mach/msm_iomap.h> #include "devices.h" -#include "board-dream.h" +#include "board-trout.h" static struct platform_device *devices[] __initdata = { &msm_device_uart3, diff --git a/arch/arm/mach-msm/board-dream.h b/arch/arm/mach-msm/board-trout.h index 4f345a5a0a61..4f345a5a0a61 100644 --- a/arch/arm/mach-msm/board-dream.h +++ b/arch/arm/mach-msm/board-trout.h diff --git a/arch/arm/mach-msm/devices.c b/arch/arm/mach-msm/devices.c index 31b6b30e98bf..982f1da60160 100644 --- a/arch/arm/mach-msm/devices.c +++ b/arch/arm/mach-msm/devices.c @@ -24,6 +24,8 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <mach/mmc.h> + static struct resource resources_uart1[] = { { .start = INT_UART1, @@ -163,8 +165,19 @@ static struct resource resources_sdc1[] = { }, { .start = INT_SDC1_0, + .end = INT_SDC1_0, + .flags = IORESOURCE_IRQ, + .name = "cmd_irq", + }, + { + .start = INT_SDC1_1, .end = INT_SDC1_1, .flags = IORESOURCE_IRQ, + .name = "pio_irq", + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, + .name = "status_irq" }, { .start = 8, @@ -181,8 +194,19 @@ static struct resource resources_sdc2[] = { }, { .start = INT_SDC2_0, + .end = INT_SDC2_0, + .flags = IORESOURCE_IRQ, + .name = "cmd_irq", + }, + { + .start = INT_SDC2_1, .end = INT_SDC2_1, .flags = IORESOURCE_IRQ, + .name = "pio_irq", + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, + .name = "status_irq" }, { .start = 8, @@ -199,8 +223,19 @@ static struct resource resources_sdc3[] = { }, { .start = INT_SDC3_0, + .end = INT_SDC3_0, + .flags = IORESOURCE_IRQ, + .name = "cmd_irq", + }, + { + .start = INT_SDC3_1, .end = INT_SDC3_1, .flags = IORESOURCE_IRQ, + .name = "pio_irq", + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, + .name = "status_irq" }, { .start = 8, @@ -217,8 +252,19 @@ static struct resource resources_sdc4[] = { }, { .start = INT_SDC4_0, + .end = INT_SDC4_0, + .flags = IORESOURCE_IRQ, + .name = "cmd_irq", + }, + { + .start = INT_SDC4_1, .end = INT_SDC4_1, .flags = IORESOURCE_IRQ, + .name = "pio_irq", + }, + { + .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, + .name = "status_irq" }, { .start = 8, @@ -266,3 +312,35 @@ struct platform_device msm_device_sdc4 = { .coherent_dma_mask = 0xffffffff, }, }; + +static struct platform_device *msm_sdcc_devices[] __initdata = { + &msm_device_sdc1, + &msm_device_sdc2, + &msm_device_sdc3, + &msm_device_sdc4, +}; + +int __init msm_add_sdcc(unsigned int controller, struct mmc_platform_data *plat, + unsigned int stat_irq, unsigned long stat_irq_flags) +{ + struct platform_device *pdev; + struct resource *res; + + if (controller < 1 || controller > 4) + return -EINVAL; + + pdev = msm_sdcc_devices[controller-1]; + pdev->dev.platform_data = plat; + + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq"); + if (!res) + return -EINVAL; + else if (stat_irq) { + res->start = res->end = stat_irq; + res->flags &= ~IORESOURCE_DISABLED; + res->flags |= stat_irq_flags; + } + + return platform_device_register(pdev); +} + diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index f5420f9585c5..d029d1f5f9e2 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -13,6 +13,8 @@ * */ +#include <linux/clk.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/interrupt.h> #include <mach/dma.h> @@ -26,6 +28,7 @@ enum { }; static DEFINE_SPINLOCK(msm_dmov_lock); +static struct clk *msm_dmov_clk; static unsigned int channel_active; static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT]; static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT]; @@ -54,6 +57,9 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) unsigned int status; spin_lock_irqsave(&msm_dmov_lock, irq_flags); + if (!channel_active) + clk_enable(msm_dmov_clk); + dsb(); status = readl(DMOV_STATUS(id)); if (list_empty(&ready_commands[id]) && (status & DMOV_STATUS_CMD_PTR_RDY)) { @@ -63,6 +69,8 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id)); } #endif + if (cmd->execute_func) + cmd->execute_func(cmd); PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status); list_add_tail(&cmd->list, &active_commands[id]); if (!channel_active) @@ -70,6 +78,8 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) channel_active |= 1U << id; writel(cmd->cmdptr, DMOV_CMD_PTR(id)); } else { + if (!channel_active) + clk_disable(msm_dmov_clk); if (list_empty(&active_commands[id])) PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status); @@ -108,6 +118,7 @@ int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) cmd.dmov_cmd.cmdptr = cmdptr; cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func; + cmd.dmov_cmd.execute_func = NULL; cmd.id = id; init_completion(&cmd.complete); @@ -165,6 +176,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) "for %p, result %x\n", id, cmd, ch_result); if (cmd) { list_del(&cmd->list); + dsb(); cmd->complete_func(cmd, ch_result, NULL); } } @@ -181,6 +193,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]); if (cmd) { list_del(&cmd->list); + dsb(); cmd->complete_func(cmd, ch_result, &errdata); } } @@ -198,6 +211,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]); if (cmd) { list_del(&cmd->list); + dsb(); cmd->complete_func(cmd, ch_result, &errdata); } /* this does not seem to work, once we get an error */ @@ -210,6 +224,8 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); list_del(&cmd->list); list_add_tail(&cmd->list, &active_commands[id]); + if (cmd->execute_func) + cmd->execute_func(cmd); PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); writel(cmd->cmdptr, DMOV_CMD_PTR(id)); } @@ -219,8 +235,10 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); } - if (!channel_active) - disable_irq(INT_ADM_AARM); + if (!channel_active) { + disable_irq_nosync(INT_ADM_AARM); + clk_disable(msm_dmov_clk); + } spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); return IRQ_HANDLED; @@ -230,11 +248,17 @@ static int __init msm_init_datamover(void) { int i; int ret; + struct clk *clk; + for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) { INIT_LIST_HEAD(&ready_commands[i]); INIT_LIST_HEAD(&active_commands[i]); writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i)); } + clk = clk_get(NULL, "adm_clk"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + msm_dmov_clk = clk; ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL); if (ret) return ret; diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 264d62e519f3..fb12fd87bb81 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -27,6 +27,16 @@ struct msm_mddi_platform_data unsigned has_vsync_irq:1; }; +struct msm_acpu_clock_platform_data +{ + uint32_t acpu_switch_time_us; + uint32_t max_speed_delta_khz; + uint32_t vdd_switch_time_us; + unsigned long power_collapse_khz; + unsigned long wait_for_irq_khz; +}; + + /* common init routines for use by arch/arm/mach-msm/board-*.c */ void __init msm_add_devices(void); @@ -34,5 +44,6 @@ void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); void __init msm_clock_init(void); +void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *); #endif diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h index 5ab5bdffab07..78b0ffdf27e8 100644 --- a/arch/arm/mach-msm/include/mach/dma.h +++ b/arch/arm/mach-msm/include/mach/dma.h @@ -28,6 +28,8 @@ struct msm_dmov_cmd { void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result, struct msm_dmov_errdata *err); + void (*execute_func)(struct msm_dmov_cmd *cmd); + void *data; }; void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h index 9f9e25cb718e..6626e7864e28 100644 --- a/arch/arm/mach-msm/include/mach/vreg.h +++ b/arch/arm/mach-msm/include/mach/vreg.h @@ -23,7 +23,7 @@ struct vreg *vreg_get(struct device *dev, const char *id); void vreg_put(struct vreg *vreg); int vreg_enable(struct vreg *vreg); -void vreg_disable(struct vreg *vreg); +int vreg_disable(struct vreg *vreg); int vreg_set_level(struct vreg *vreg, unsigned mv); #endif diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c index 69ca0dd79bdf..6c8d5f8caef3 100644 --- a/arch/arm/mach-msm/irq.c +++ b/arch/arm/mach-msm/irq.c @@ -101,11 +101,11 @@ static int msm_irq_set_type(unsigned int irq, unsigned int flow_type) if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { writel(readl(treg) | b, treg); - set_irq_handler(irq, handle_edge_irq); + irq_desc[irq].handle_irq = handle_edge_irq; } if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { writel(readl(treg) & (~b), treg); - set_irq_handler(irq, handle_level_irq); + irq_desc[irq].handle_irq = handle_level_irq; } return 0; } diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h index 834760f25692..235076533c03 100644 --- a/arch/arm/mach-msm/proc_comm.h +++ b/arch/arm/mach-msm/proc_comm.h @@ -62,19 +62,104 @@ enum { PCOM_RESET_CHIP_IMM, PCOM_PM_VID_EN, PCOM_VREG_PULLDOWN, + PCOM_GET_MODEM_VERSION, + PCOM_CLK_REGIME_SEC_RESET, + PCOM_CLK_REGIME_SEC_RESET_ASSERT, + PCOM_CLK_REGIME_SEC_RESET_DEASSERT, + PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP, + PCOM_CLK_REGIME_SEC_ENABLE, + PCOM_CLK_REGIME_SEC_DISABLE, + PCOM_CLK_REGIME_SEC_IS_ON, + PCOM_CLK_REGIME_SEC_SEL_CLK_INV, + PCOM_CLK_REGIME_SEC_SEL_CLK_SRC, + PCOM_CLK_REGIME_SEC_SEL_CLK_DIV, + PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE, + PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE, + PCOM_CLK_REGIME_SEC_SEL_SPEED, + PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP, + PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP, + PCOM_CLK_REGIME_SEC_USB_XTAL_ON, + PCOM_CLK_REGIME_SEC_USB_XTAL_OFF, + PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE, + PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK, + PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ, + PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ, + PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ, + PCOM_CLK_REGIME_SEC_SEL_VFE_SRC, + PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK, + PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK, + PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF, + PCOM_CLK_REGIME_SEC_VFE_RAIL_ON, + PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF, + PCOM_CLK_REGIME_SEC_GRP_RAIL_ON, + PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF, + PCOM_CLK_REGIME_SEC_VDC_RAIL_ON, + PCOM_CLK_REGIME_SEC_LCD_CTRL, + PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE, + PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE, + PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP, + PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER, + PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP, + PCOM_GPIO_CONFIG, + PCOM_GPIO_CONFIGURE_GROUP, + PCOM_GPIO_TLMM_SET_PORT, + PCOM_GPIO_TLMM_CONFIG_EX, + PCOM_SET_FTM_BOOT_COUNT, + PCOM_RESERVED0, + PCOM_RESERVED1, + PCOM_CUSTOMER_CMD1, + PCOM_CUSTOMER_CMD2, + PCOM_CUSTOMER_CMD3, + PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE, + PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE, + PCOM_CLK_REGIME_SEC_RAIL_DISABLE, + PCOM_CLK_REGIME_SEC_RAIL_ENABLE, + PCOM_CLK_REGIME_SEC_RAIL_CONTROL, + PCOM_SET_SW_WATCHDOG_STATE, + PCOM_PM_MPP_CONFIG_DIGITAL_INPUT, + PCOM_PM_MPP_CONFIG_I_SINK, + PCOM_RESERVED_101, + PCOM_MSM_HSUSB_PHY_RESET, + PCOM_GET_BATT_MV_LEVEL, + PCOM_CHG_USB_IS_PC_CONNECTED, + PCOM_CHG_USB_IS_CHARGER_CONNECTED, + PCOM_CHG_USB_IS_DISCONNECTED, + PCOM_CHG_USB_IS_AVAILABLE, + PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ, + PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY, + PCOM_CLKCTL_RPC_RESET_ASSERT, + PCOM_CLKCTL_RPC_RESET_DEASSERT, + PCOM_CLKCTL_RPC_RAIL_ON, + PCOM_CLKCTL_RPC_RAIL_OFF, + PCOM_CLKCTL_RPC_RAIL_ENABLE, + PCOM_CLKCTL_RPC_RAIL_DISABLE, + PCOM_CLKCTL_RPC_RAIL_CONTROL, + PCOM_CLKCTL_RPC_MIN_MSMC1, PCOM_NUM_CMDS, }; enum { - PCOM_INVALID_STATUS = 0x0, - PCOM_READY, - PCOM_CMD_RUNNING, - PCOM_CMD_SUCCESS, - PCOM_CMD_FAIL, + PCOM_INVALID_STATUS = 0x0, + PCOM_READY, + PCOM_CMD_RUNNING, + PCOM_CMD_SUCCESS, + PCOM_CMD_FAIL, + PCOM_CMD_FAIL_FALSE_RETURNED, + PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER, + PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT, + PCOM_CMD_FAIL_CMD_UNREGISTERED, + PCOM_CMD_FAIL_CMD_LOCKED, + PCOM_CMD_FAIL_SERVER_NOT_YET_READY, + PCOM_CMD_FAIL_BAD_DESTINATION, + PCOM_CMD_FAIL_SERVER_RESET, + PCOM_CMD_FAIL_SMSM_NOT_INIT, + PCOM_CMD_FAIL_PROC_COMM_BUSY, + PCOM_CMD_FAIL_PROC_COMM_NOT_INIT, + }; /* List of VREGs that support the Pull Down Resistor setting. */ -enum { +enum vreg_pdown_id { PM_VREG_PDOWN_MSMA_ID, PM_VREG_PDOWN_MSMP_ID, PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */ @@ -131,6 +216,11 @@ enum { PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID }; +enum { + PCOM_CLKRGM_APPS_RESET_USB_PHY = 34, + PCOM_CLKRGM_APPS_RESET_USBH = 37, +}; + /* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */ #define GPIO_ENABLE 0 diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c index fcb0b9f25684..a9103bc6615f 100644 --- a/arch/arm/mach-msm/vreg.c +++ b/arch/arm/mach-msm/vreg.c @@ -1,6 +1,7 @@ /* arch/arm/mach-msm/vreg.c * * Copyright (C) 2008 Google, Inc. + * Copyright (c) 2009, Code Aurora Forum. All rights reserved. * Author: Brian Swetland <swetland@google.com> * * This software is licensed under the terms of the GNU General Public @@ -18,6 +19,7 @@ #include <linux/device.h> #include <linux/init.h> #include <linux/debugfs.h> +#include <linux/string.h> #include <mach/vreg.h> #include "proc_comm.h" @@ -25,42 +27,62 @@ struct vreg { const char *name; unsigned id; + int status; + unsigned refcnt; }; -#define VREG(_name, _id) { .name = _name, .id = _id, } +#define VREG(_name, _id, _status, _refcnt) \ + { .name = _name, .id = _id, .status = _status, .refcnt = _refcnt } static struct vreg vregs[] = { - VREG("msma", 0), - VREG("msmp", 1), - VREG("msme1", 2), - VREG("msmc1", 3), - VREG("msmc2", 4), - VREG("gp3", 5), - VREG("msme2", 6), - VREG("gp4", 7), - VREG("gp1", 8), - VREG("tcxo", 9), - VREG("pa", 10), - VREG("rftx", 11), - VREG("rfrx1", 12), - VREG("rfrx2", 13), - VREG("synt", 14), - VREG("wlan", 15), - VREG("usb", 16), - VREG("boost", 17), - VREG("mmc", 18), - VREG("ruim", 19), - VREG("msmc0", 20), - VREG("gp2", 21), - VREG("gp5", 22), - VREG("gp6", 23), - VREG("rf", 24), - VREG("rf_vco", 26), - VREG("mpll", 27), - VREG("s2", 28), - VREG("s3", 29), - VREG("rfubm", 30), - VREG("ncp", 31), + VREG("msma", 0, 0, 0), + VREG("msmp", 1, 0, 0), + VREG("msme1", 2, 0, 0), + VREG("msmc1", 3, 0, 0), + VREG("msmc2", 4, 0, 0), + VREG("gp3", 5, 0, 0), + VREG("msme2", 6, 0, 0), + VREG("gp4", 7, 0, 0), + VREG("gp1", 8, 0, 0), + VREG("tcxo", 9, 0, 0), + VREG("pa", 10, 0, 0), + VREG("rftx", 11, 0, 0), + VREG("rfrx1", 12, 0, 0), + VREG("rfrx2", 13, 0, 0), + VREG("synt", 14, 0, 0), + VREG("wlan", 15, 0, 0), + VREG("usb", 16, 0, 0), + VREG("boost", 17, 0, 0), + VREG("mmc", 18, 0, 0), + VREG("ruim", 19, 0, 0), + VREG("msmc0", 20, 0, 0), + VREG("gp2", 21, 0, 0), + VREG("gp5", 22, 0, 0), + VREG("gp6", 23, 0, 0), + VREG("rf", 24, 0, 0), + VREG("rf_vco", 26, 0, 0), + VREG("mpll", 27, 0, 0), + VREG("s2", 28, 0, 0), + VREG("s3", 29, 0, 0), + VREG("rfubm", 30, 0, 0), + VREG("ncp", 31, 0, 0), + VREG("gp7", 32, 0, 0), + VREG("gp8", 33, 0, 0), + VREG("gp9", 34, 0, 0), + VREG("gp10", 35, 0, 0), + VREG("gp11", 36, 0, 0), + VREG("gp12", 37, 0, 0), + VREG("gp13", 38, 0, 0), + VREG("gp14", 39, 0, 0), + VREG("gp15", 40, 0, 0), + VREG("gp16", 41, 0, 0), + VREG("gp17", 42, 0, 0), + VREG("s4", 43, 0, 0), + VREG("usb2", 44, 0, 0), + VREG("wlan2", 45, 0, 0), + VREG("xo_out", 46, 0, 0), + VREG("lvsw0", 47, 0, 0), + VREG("lvsw1", 48, 0, 0), }; struct vreg *vreg_get(struct device *dev, const char *id) @@ -70,7 +92,7 @@ struct vreg *vreg_get(struct device *dev, const char *id) if (!strcmp(vregs[n].name, id)) return vregs + n; } - return 0; + return ERR_PTR(-ENOENT); } void vreg_put(struct vreg *vreg) @@ -81,20 +103,39 @@ int vreg_enable(struct vreg *vreg) { unsigned id = vreg->id; unsigned enable = 1; - return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); + + if (vreg->refcnt == 0) + vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); + + if ((vreg->refcnt < UINT_MAX) && (!vreg->status)) + vreg->refcnt++; + + return vreg->status; } -void vreg_disable(struct vreg *vreg) +int vreg_disable(struct vreg *vreg) { unsigned id = vreg->id; unsigned enable = 0; - msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); + + if (!vreg->refcnt) + return 0; + + if (vreg->refcnt == 1) + vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); + + if (!vreg->status) + vreg->refcnt--; + + return vreg->status; } int vreg_set_level(struct vreg *vreg, unsigned mv) { unsigned id = vreg->id; - return msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv); + + vreg->status = msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv); + return vreg->status; } #if defined(CONFIG_DEBUG_FS) @@ -118,24 +159,59 @@ static int vreg_debug_set(void *data, u64 val) static int vreg_debug_get(void *data, u64 *val) { - return -ENOSYS; + struct vreg *vreg = data; + + if (!vreg->status) + *val = 0; + else + *val = 1; + + return 0; +} + +static int vreg_debug_count_set(void *data, u64 val) +{ + struct vreg *vreg = data; + if (val > UINT_MAX) + val = UINT_MAX; + vreg->refcnt = val; + return 0; +} + +static int vreg_debug_count_get(void *data, u64 *val) +{ + struct vreg *vreg = data; + + *val = vreg->refcnt; + + return 0; } DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n"); +DEFINE_SIMPLE_ATTRIBUTE(vreg_count_fops, vreg_debug_count_get, + vreg_debug_count_set, "%llu\n"); static int __init vreg_debug_init(void) { struct dentry *dent; int n; + char name[32]; + const char *refcnt_name = "_refcnt"; dent = debugfs_create_dir("vreg", 0); if (IS_ERR(dent)) return 0; - for (n = 0; n < ARRAY_SIZE(vregs); n++) + for (n = 0; n < ARRAY_SIZE(vregs); n++) { (void) debugfs_create_file(vregs[n].name, 0644, dent, vregs + n, &vreg_fops); + strlcpy(name, vregs[n].name, sizeof(name)); + strlcat(name, refcnt_name, sizeof(name)); + (void) debugfs_create_file(name, 0644, + dent, vregs + n, &vreg_count_fops); + } + return 0; } diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 3872af1cf2c3..9a2911e004a3 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -62,6 +62,15 @@ config MACH_MX31_3DS Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. +config MACH_MX31_3DS_MXC_NAND_USE_BBT + bool "Make the MXC NAND driver use the in flash Bad Block Table" + depends on MACH_MX31_3DS + depends on MTD_NAND_MXC + help + Enable this if you want that the MXC NAND driver uses the in flash + Bad Block Table to know what blocks are bad instead of scanning the + entire flash looking for bad block markers. + config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c index 80dba9966b5e..9a9eb6de6127 100644 --- a/arch/arm/mach-mx3/clock-imx31.c +++ b/arch/arm/mach-mx3/clock-imx31.c @@ -468,6 +468,7 @@ static struct clk ahb_clk = { } DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL); DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk); DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk); @@ -490,7 +491,7 @@ DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk); DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk); DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk); DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk); -DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk); DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk); DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk); DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk); @@ -514,7 +515,6 @@ DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk) DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk); DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); -DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -572,7 +572,6 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "iim", iim_clk) _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk) _REGISTER_CLOCK(NULL, "mbx", mbx_clk) - _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk) }; int __init mx31_clocks_init(unsigned long fref) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 6adb586515ea..1ffed283d6cd 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -575,11 +575,45 @@ struct platform_device imx_ssi_device1 = { .resource = imx_ssi_resources1, }; -static int mx3_devices_init(void) +static struct resource imx_wdt_resources[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device imx_wdt_device0 = { + .name = "imx-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(imx_wdt_resources), + .resource = imx_wdt_resources, +}; + +static struct resource imx_rtc_resources[] = { + { + .start = MX31_RTC_BASE_ADDR, + .end = MX31_RTC_BASE_ADDR + 0x3fff, + .flags = IORESOURCE_MEM, + }, + { + .start = MX31_INT_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_rtc_device0 = { + .name = "mxc_rtc", + .id = -1, + .num_resources = ARRAY_SIZE(imx_rtc_resources), + .resource = imx_rtc_resources, +}; + +static int __init mx3_devices_init(void) { if (cpu_is_mx31()) { mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; + imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR; + imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff; mxc_register_device(&mxc_rnga_device, NULL); } if (cpu_is_mx35()) { @@ -597,6 +631,8 @@ static int mx3_devices_init(void) imx_ssi_resources0[1].end = MX35_INT_SSI1; imx_ssi_resources1[1].start = MX35_INT_SSI2; imx_ssi_resources1[1].end = MX35_INT_SSI2; + imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; + imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } return 0; diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 42cf175eac6b..b1687ad72052 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -25,4 +25,6 @@ extern struct platform_device mxc_spi_device1; extern struct platform_device mxc_spi_device2; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; - +extern struct platform_device imx_ssi_device1; +extern struct platform_device imx_wdt_device0; +extern struct platform_device imx_rtc_device0; diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index b88c18ad7698..f54af1e29ca4 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -23,6 +23,9 @@ #include <linux/gpio.h> #include <linux/smsc911x.h> #include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/regulator/machine.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -31,26 +34,96 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31pdk.h> +#include <mach/board-mx31_3ds.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/mxc_nand.h> +#include <mach/spi.h> #include "devices.h" /*! - * @file mx31pdk.c + * @file mx31_3ds.c * * @brief This file contains the board-specific initialization routines. * * @ingroup System */ -static int mx31pdk_pins[] = { +static int mx31_3ds_pins[] = { /* UART1 */ MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), + /* SPI 1 */ + MX31_PIN_CSPI2_SCLK__SCLK, + MX31_PIN_CSPI2_MOSI__MOSI, + MX31_PIN_CSPI2_MISO__MISO, + MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS0__SS0, + MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */ + /* MC13783 IRQ */ + IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), +}; + +/* Regulators */ +static struct regulator_init_data pwgtx_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + }, +}; + +static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { + { + .id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */ + .init_data = &pwgtx_init, + }, { + .id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */ + .init_data = &pwgtx_init, + }, +}; + +/* MC13783 */ +static struct mc13783_platform_data mc13783_pdata __initdata = { + .regulators = mx31_3ds_regulators, + .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), + .flags = MC13783_USE_REGULATOR, +}; + +/* SPI */ +static int spi1_internal_chipselect[] = { + MXC_SPI_CS(0), + MXC_SPI_CS(2), +}; + +static struct spi_imx_master spi1_pdata = { + .chipselect = spi1_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect), +}; + +static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { + { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 1, /* SS2 */ + .platform_data = &mc13783_pdata, + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + .mode = SPI_CS_HIGH, + }, +}; + +/* + * NAND Flash + */ +static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = { + .width = 1, + .hw_ecc = 1, +#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT + .flash_bbt = 1, +#endif }; static struct imxuart_platform_data uart_pdata = { @@ -95,7 +168,7 @@ static struct platform_device smsc911x_device = { * LEDs, switches, interrupts for Ethernet. */ -static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc) +static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc) { uint32_t imr_val; uint32_t int_valid; @@ -163,7 +236,7 @@ static struct irq_chip expio_irq_chip = { .unmask = expio_unmask_irq, }; -static int __init mx31pdk_init_expio(void) +static int __init mx31_3ds_init_expio(void) { int i; int ret; @@ -176,7 +249,7 @@ static int __init mx31pdk_init_expio(void) return -ENODEV; } - pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n", + pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n", __raw_readw(CPLD_CODE_VER_REG)); /* @@ -201,7 +274,7 @@ static int __init mx31pdk_init_expio(void) set_irq_flags(i, IRQF_VALID); } set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler); + set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler); return 0; } @@ -209,7 +282,7 @@ static int __init mx31pdk_init_expio(void) /* * This structure defines the MX31 memory map. */ -static struct map_desc mx31pdk_io_desc[] __initdata = { +static struct map_desc mx31_3ds_io_desc[] __initdata = { { .virtual = MX31_CS5_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), @@ -221,10 +294,10 @@ static struct map_desc mx31pdk_io_desc[] __initdata = { /* * Set up static virtual mappings. */ -static void __init mx31pdk_map_io(void) +static void __init mx31_3ds_map_io(void) { mx31_map_io(); - iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc)); + iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc)); } /*! @@ -232,35 +305,40 @@ static void __init mx31pdk_map_io(void) */ static void __init mxc_board_init(void) { - mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins), - "mx31pdk"); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), + "mx31_3ds"); mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata); + + mxc_register_device(&mxc_spi_device1, &spi1_pdata); + spi_register_board_info(mx31_3ds_spi_devs, + ARRAY_SIZE(mx31_3ds_spi_devs)); - if (!mx31pdk_init_expio()) + if (!mx31_3ds_init_expio()) platform_device_register(&smsc911x_device); } -static void __init mx31pdk_timer_init(void) +static void __init mx31_3ds_timer_init(void) { mx31_clocks_init(26000000); } -static struct sys_timer mx31pdk_timer = { - .init = mx31pdk_timer_init, +static struct sys_timer mx31_3ds_timer = { + .init = mx31_3ds_timer_init, }; /* * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31PDK data structure. + * initialize __mach_desc_MX31_3DS data structure. */ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .phys_io = MX31_AIPS1_BASE_ADDR, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31pdk_map_io, + .map_io = mx31_3ds_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, - .timer = &mx31pdk_timer, + .timer = &mx31_3ds_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c index ccd874225c3b..466996ecd92b 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -206,5 +206,7 @@ void __init mx31lite_db_init(void) mxc_register_device(&mxcsdhc_device0, &mmc_pdata); mxc_register_device(&mxc_spi_device0, &spi0_pdata); platform_device_register(&litekit_led_device); + mxc_register_device(&imx_wdt_device0, NULL); + mxc_register_device(&imx_rtc_device0, NULL); } diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index be90c03101cd..8f85f73b83a8 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -757,7 +757,7 @@ DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, /* GPT */ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, - NULL, NULL, &ipg_perclk, NULL); + NULL, NULL, &ipg_clk, NULL); DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_clk, NULL); diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 41c769f08c4d..2d37785e3857 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -14,9 +14,62 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/module.h> #include <mach/hardware.h> #include <asm/io.h> +static int cpu_silicon_rev = -1; + +#define SI_REV 0x48 + +static void query_silicon_parameter(void) +{ + void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE); + u32 rev; + + if (!rom) { + cpu_silicon_rev = -EINVAL; + return; + } + + rev = readl(rom + SI_REV); + switch (rev) { + case 0x1: + cpu_silicon_rev = MX51_CHIP_REV_1_0; + break; + case 0x2: + cpu_silicon_rev = MX51_CHIP_REV_1_1; + break; + case 0x10: + cpu_silicon_rev = MX51_CHIP_REV_2_0; + break; + case 0x20: + cpu_silicon_rev = MX51_CHIP_REV_3_0; + break; + default: + cpu_silicon_rev = 0; + } + + iounmap(rom); +} + +/* + * Returns: + * the silicon revision of the cpu + * -EINVAL - not a mx51 + */ +int mx51_revision(void) +{ + if (!cpu_is_mx51()) + return -EINVAL; + + if (cpu_silicon_rev == -1) + query_silicon_parameter(); + + return cpu_silicon_rev; +} +EXPORT_SYMBOL(mx51_revision); + static int __init post_cpu_init(void) { unsigned int reg; diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index c21e18be7af8..b7677ef80cc4 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -35,11 +35,6 @@ static struct map_desc mxc_io_desc[] __initdata = { .length = MX51_DEBUG_SIZE, .type = MT_DEVICE }, { - .virtual = MX51_TZIC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR), - .length = MX51_TZIC_SIZE, - .type = MT_DEVICE - }, { .virtual = MX51_AIPS1_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR), .length = MX51_AIPS1_SIZE, @@ -54,11 +49,6 @@ static struct map_desc mxc_io_desc[] __initdata = { .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR), .length = MX51_AIPS2_SIZE, .type = MT_DEVICE - }, { - .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR), - .length = MX51_NFC_AXI_SIZE, - .type = MT_DEVICE }, }; @@ -69,14 +59,6 @@ static struct map_desc mxc_io_desc[] __initdata = { */ void __init mx51_map_io(void) { - u32 tzic_addr; - - if (mx51_revision() < MX51_CHIP_REV_2_0) - tzic_addr = 0x8FFFC000; - else - tzic_addr = 0xE0003000; - mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr); - mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR)); @@ -85,5 +67,17 @@ void __init mx51_map_io(void) void __init mx51_init_irq(void) { - tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR)); + unsigned long tzic_addr; + void __iomem *tzic_virt; + + if (mx51_revision() < MX51_CHIP_REV_2_0) + tzic_addr = MX51_TZIC_BASE_ADDR_TO1; + else + tzic_addr = MX51_TZIC_BASE_ADDR; + + tzic_virt = ioremap(tzic_addr, SZ_16K); + if (!tzic_virt) + panic("unable to map TZIC interrupt controller\n"); + + tzic_init_irq(tzic_virt); } diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 3c5e0f522e9c..71f3ea623974 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,6 +6,7 @@ config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" select NOMADIK_8815 select HAS_MTU + select NOMADIK_GPIO endmenu diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index 36f67fb207d2..a6bbd1a7b4e7 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,7 +7,7 @@ # Object file lists. -obj-y += clock.o gpio.o +obj-y += clock.o # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 9bf33b30a025..91c3c901b469 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/amba/bus.h> +#include <linux/platform_device.h> #include <linux/gpio.h> #include <mach/hardware.h> @@ -30,60 +31,66 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + /* The 8815 has 4 GPIO blocks, let's register them immediately */ + +#define GPIO_RESOURCE(block) \ + { \ + .start = NOMADIK_GPIO##block##_BASE, \ + .end = NOMADIK_GPIO##block##_BASE + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = IRQ_GPIO##block, \ + .end = IRQ_GPIO##block, \ + .flags = IORESOURCE_IRQ, \ + } + +#define GPIO_DEVICE(block) \ + { \ + .name = "gpio", \ + .id = block, \ + .num_resources = 2, \ + .resource = &cpu8815_gpio_resources[block * 2], \ + .dev = { \ + .platform_data = &cpu8815_gpio[block], \ + }, \ + } + static struct nmk_gpio_platform_data cpu8815_gpio[] = { { .name = "GPIO-0-31", .first_gpio = 0, .first_irq = NOMADIK_GPIO_TO_IRQ(0), - .parent_irq = IRQ_GPIO0, }, { .name = "GPIO-32-63", .first_gpio = 32, .first_irq = NOMADIK_GPIO_TO_IRQ(32), - .parent_irq = IRQ_GPIO1, }, { .name = "GPIO-64-95", .first_gpio = 64, .first_irq = NOMADIK_GPIO_TO_IRQ(64), - .parent_irq = IRQ_GPIO2, }, { .name = "GPIO-96-127", /* 124..127 not routed to pin */ .first_gpio = 96, .first_irq = NOMADIK_GPIO_TO_IRQ(96), - .parent_irq = IRQ_GPIO3, } }; -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} +static struct resource cpu8815_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), +}; -static struct amba_device cpu8815_amba_gpio[] = { - { - .dev = { - .init_name = "gpio0", - .platform_data = cpu8815_gpio + 0, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE), - }, { - .dev = { - .init_name = "gpio1", - .platform_data = cpu8815_gpio + 1, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE), - }, { - .dev = { - .init_name = "gpio2", - .platform_data = cpu8815_gpio + 2, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE), - }, { - .dev = { - .init_name = "gpio3", - .platform_data = cpu8815_gpio + 3, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE), - }, +static struct platform_device cpu8815_platform_gpio[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), }; static struct amba_device cpu8815_amba_rng = { @@ -93,11 +100,14 @@ static struct amba_device cpu8815_amba_rng = { __MEM_4K_RESOURCE(NOMADIK_RNG_BASE), }; +static struct platform_device *platform_devs[] __initdata = { + cpu8815_platform_gpio + 0, + cpu8815_platform_gpio + 1, + cpu8815_platform_gpio + 2, + cpu8815_platform_gpio + 3, +}; + static struct amba_device *amba_devs[] __initdata = { - cpu8815_amba_gpio + 0, - cpu8815_amba_gpio + 1, - cpu8815_amba_gpio + 2, - cpu8815_amba_gpio + 3, &cpu8815_amba_rng }; @@ -105,6 +115,7 @@ static int __init cpu8815_init(void) { int i; + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) amba_device_register(amba_devs[i], &iomem_resource); return 0; diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h index 61577c9f9a7d..7a81a0420343 100644 --- a/arch/arm/mach-nomadik/include/mach/gpio.h +++ b/arch/arm/mach-nomadik/include/mach/gpio.h @@ -1,71 +1,6 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -#include <asm-generic/gpio.h> - -/* - * These currently cause a function call to happen, they may be optimized - * if needed by adding cpu-specific defines to identify blocks - * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -extern int nmk_gpio_get_mode(int gpio); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int parent_irq; -}; +#include <plat/gpio.h> #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index a0a2a113465c..504d2bd222fe 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -96,6 +96,7 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); + omap_serial_init(); zoom_peripherals_init(); board_smc91x_init(); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index da9bcb898991..3ccc34ebdcc7 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -216,7 +216,7 @@ static void __init n8x0_onenand_init(void) {} */ #define N8X0_SLOT_SWITCH_GPIO 96 #define N810_EMMC_VSD_GPIO 23 -#define NN810_EMMC_VIO_GPIO 9 +#define N810_EMMC_VIO_GPIO 9 static int n8x0_mmc_switch_slot(struct device *dev, int slot) { @@ -304,10 +304,10 @@ static void n810_set_power_emmc(struct device *dev, if (power_on) { gpio_set_value(N810_EMMC_VSD_GPIO, 1); msleep(1); - gpio_set_value(NN810_EMMC_VIO_GPIO, 1); + gpio_set_value(N810_EMMC_VIO_GPIO, 1); msleep(1); } else { - gpio_set_value(NN810_EMMC_VIO_GPIO, 0); + gpio_set_value(N810_EMMC_VIO_GPIO, 0); msleep(50); gpio_set_value(N810_EMMC_VSD_GPIO, 0); msleep(50); @@ -468,7 +468,7 @@ static void n8x0_mmc_cleanup(struct device *dev) if (machine_is_nokia_n810()) { gpio_free(N810_EMMC_VSD_GPIO); - gpio_free(NN810_EMMC_VIO_GPIO); + gpio_free(N810_EMMC_VIO_GPIO); } } @@ -529,7 +529,7 @@ void __init n8x0_mmc_init(void) err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch"); if (err) - return err; + return; gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0); @@ -537,17 +537,17 @@ void __init n8x0_mmc_init(void) err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf"); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); - return err; + return; } gpio_direction_output(N810_EMMC_VSD_GPIO, 0); - err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); + err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); gpio_free(N810_EMMC_VSD_GPIO); - return err; + return; } - gpio_direction_output(NN810_EMMC_VIO_GPIO, 0); + gpio_direction_output(N810_EMMC_VIO_GPIO, 0); } mmc_data[0] = &mmc1_data; diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index bb4018b60642..e15d2e87cfc1 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = { static struct platform_device zoom_debugboard_serial_device = { .name = "serial8250", - .id = 3, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = serial_platform_data, }, diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index ca95d8d64136..6b3984964cc5 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -280,7 +280,6 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { omap_i2c_init(); - omap_serial_init(); usb_musb_init(&musb_board_data); enable_board_wakeup_source(); } diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index ff25c7e4e606..50fd74916643 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -52,7 +52,7 @@ omap_irq_base: .word 0 mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision and \tmp, \tmp, #0x000f0000 @ only check architecture - cmp \tmp, #0x00060000 @ is v6? + cmp \tmp, #0x00070000 @ is v6? beq 2400f @ found v6 so it's omap24xx mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9 diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index da77930480e9..3771254dfa81 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -115,7 +115,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { } }; -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static struct plat_serial8250_port serial_platform_data3[] = { { .irq = 70, @@ -128,23 +127,12 @@ static struct plat_serial8250_port serial_platform_data3[] = { } }; -static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals) -{ - serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; -} -#else -static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals) -{ -} -#endif - void __init omap2_set_globals_uart(struct omap_globals *omap2_globals) { serial_platform_data0[0].mapbase = omap2_globals->uart1_phys; serial_platform_data1[0].mapbase = omap2_globals->uart2_phys; serial_platform_data2[0].mapbase = omap2_globals->uart3_phys; - if (cpu_is_omap3630() || cpu_is_omap44xx()) - omap2_set_globals_uart4(omap2_globals); + serial_platform_data3[0].mapbase = omap2_globals->uart4_phys; } static inline unsigned int __serial_read_reg(struct uart_port *up, @@ -550,7 +538,7 @@ static ssize_t sleep_timeout_store(struct device *dev, unsigned int value; if (sscanf(buf, "%u", &value) != 1) { - printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); + dev_err(dev, "sleep_timeout_store: Invalid value\n"); return -EINVAL; } @@ -664,27 +652,33 @@ void __init omap_serial_early_init(void) struct device *dev = &pdev->dev; struct plat_serial8250_port *p = dev->platform_data; + /* Don't map zero-based physical address */ + if (p->mapbase == 0) { + dev_warn(dev, "no physical address for uart#%d," + " so skipping early_init...\n", i); + continue; + } /* * Module 4KB + L4 interconnect 4KB * Static mapping, never released */ p->membase = ioremap(p->mapbase, SZ_8K); if (!p->membase) { - printk(KERN_ERR "ioremap failed for uart%i\n", i + 1); + dev_err(dev, "ioremap failed for uart%i\n", i + 1); continue; } sprintf(name, "uart%d_ick", i + 1); uart->ick = clk_get(NULL, name); if (IS_ERR(uart->ick)) { - printk(KERN_ERR "Could not get uart%d_ick\n", i + 1); + dev_err(dev, "Could not get uart%d_ick\n", i + 1); uart->ick = NULL; } sprintf(name, "uart%d_fck", i+1); uart->fck = clk_get(NULL, name); if (IS_ERR(uart->fck)) { - printk(KERN_ERR "Could not get uart%d_fck\n", i + 1); + dev_err(dev, "Could not get uart%d_fck\n", i + 1); uart->fck = NULL; } @@ -727,6 +721,13 @@ void __init omap_serial_init_port(int port) pdev = &uart->pdev; dev = &pdev->dev; + /* Don't proceed if there's no clocks available */ + if (unlikely(!uart->ick || !uart->fck)) { + WARN(1, "%s: can't init uart%d, no clocks available\n", + kobject_name(&dev->kobj), port); + return; + } + omap_uart_enable_clocks(uart); omap_uart_reset(uart); diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index e704edb733c0..a01b76b7c956 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c deleted file mode 100644 index a7043115de72..000000000000 --- a/arch/arm/mach-realview/clock.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * linux/arch/arm/mach-realview/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/hardware/icst307.h> - -#include "clock.h" - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - struct icst307_vco vco; - vco = icst307_khz_to_vco(clk->params, rate / 1000); - return icst307_khz(clk->params, vco) * 1000; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - - if (clk->setvco) { - struct icst307_vco vco; - - vco = icst307_khz_to_vco(clk->params, rate / 1000); - clk->rate = icst307_khz(clk->params, vco) * 1000; - clk->setvco(clk, vco); - ret = 0; - } - return ret; -} -EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h deleted file mode 100644 index ebbb0f06b600..000000000000 --- a/arch/arm/mach-realview/clock.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/arch/arm/mach-realview/clock.h - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct module; -struct icst307_params; - -struct clk { - unsigned long rate; - const struct icst307_params *params; - void *data; - void (*setvco)(struct clk *, struct icst307_vco vco); -}; diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 90bd4ef71b2c..1b468bd490af 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -25,8 +25,6 @@ #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/ata_platform.h> @@ -39,7 +37,7 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/hardware/arm_timer.h> -#include <asm/hardware/icst307.h> +#include <asm/hardware/icst.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> @@ -48,13 +46,12 @@ #include <asm/hardware/gic.h> +#include <mach/clkdev.h> #include <mach/platform.h> #include <mach/irqs.h> +#include <plat/timer-sp.h> #include "core.h" -#include "clock.h" - -#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) /* used by entry-macro.S and platsmp.c */ void __iomem *gic_cpu_base_addr; @@ -78,20 +75,6 @@ void __init realview_adjust_zones(int node, unsigned long *size, } #endif -/* - * This is the RealView sched_clock implementation. This has - * a resolution of 41.7ns, and a maximum value of about 179s. - */ -unsigned long long sched_clock(void) -{ - unsigned long long v; - - v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125; - do_div(v, 3); - - return v; -} - #define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET) @@ -273,37 +256,40 @@ struct mmci_platform_data realview_mmc1_plat_data = { /* * Clock handling */ -static const struct icst307_params realview_oscvco_params = { - .ref = 24000, - .vco_max = 200000, +static const struct icst_params realview_oscvco_params = { + .ref = 24000000, + .vco_max = ICST307_VCO_MAX, + .vco_min = ICST307_VCO_MIN, .vd_min = 4 + 8, .vd_max = 511 + 8, .rd_min = 1 + 2, .rd_max = 127 + 2, + .s2div = icst307_s2div, + .idx2s = icst307_idx2s, }; -static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) +static void realview_oscvco_set(struct clk *clk, struct icst_vco vco) { void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; - void __iomem *sys_osc; u32 val; - if (machine_is_realview_pb1176()) - sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; - else - sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; - - val = readl(sys_osc) & ~0x7ffff; + val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, sys_lock); - writel(val, sys_osc); + writel(val, clk->vcoreg); writel(0, sys_lock); } +static const struct clk_ops oscvco_clk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = realview_oscvco_set, +}; + static struct clk oscvco_clk = { + .ops = &oscvco_clk_ops, .params = &realview_oscvco_params, - .setvco = realview_oscvco_set, }; /* @@ -346,7 +332,13 @@ static struct clk_lookup lookups[] = { static int __init clk_init(void) { + if (machine_is_realview_pb1176()) + oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; + else + oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + return 0; } arch_initcall(clk_init); @@ -643,133 +635,6 @@ void __iomem *timer2_va_base; void __iomem *timer3_va_base; /* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) -#define TIMER_DIVISOR (TIMER_CTRL_DIV256) -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_DIVISOR (TIMER_CTRL_DIV16) -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_DIVISOR (TIMER_CTRL_DIV1) -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static void timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD); - - ctrl = TIMER_CTRL_PERIODIC; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TIMER_CTRL_ONESHOT; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - writel(ctrl, timer0_va_base + TIMER_CTRL); -} - -static int timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL); - - writel(evt, timer0_va_base + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL); - - return 0; -} - -static struct clock_event_device timer0_clockevent = { - .name = "timer0", - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = timer_set_mode, - .set_next_event = timer_set_next_event, - .rating = 300, - .cpumask = cpu_all_mask, -}; - -static void __init realview_clockevents_init(unsigned int timer_irq) -{ - timer0_clockevent.irq = timer_irq; - timer0_clockevent.mult = - div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift); - timer0_clockevent.max_delta_ns = - clockevent_delta2ns(0xffffffff, &timer0_clockevent); - timer0_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &timer0_clockevent); - - clockevents_register_device(&timer0_clockevent); -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &timer0_clockevent; - - /* clear the interrupt */ - writel(1, timer0_va_base + TIMER_INTCLR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction realview_timer_irq = { - .name = "RealView Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = realview_timer_interrupt, -}; - -static cycle_t realview_get_cycles(struct clocksource *cs) -{ - return ~readl(timer3_va_base + TIMER_VALUE); -} - -static struct clocksource clocksource_realview = { - .name = "timer3", - .rating = 200, - .read = realview_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void __init realview_clocksource_init(void) -{ - /* setup timer 0 as free-running clocksource */ - writel(0, timer3_va_base + TIMER_CTRL); - writel(0xffffffff, timer3_va_base + TIMER_LOAD); - writel(0xffffffff, timer3_va_base + TIMER_VALUE); - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - timer3_va_base + TIMER_CTRL); - - clocksource_realview.mult = - clocksource_khz2mult(1000, clocksource_realview.shift); - clocksource_register(&clocksource_realview); -} - -/* * Set up the clock source and clock events devices */ void __init realview_timer_init(unsigned int timer_irq) @@ -796,13 +661,8 @@ void __init realview_timer_init(unsigned int timer_irq) writel(0, timer2_va_base + TIMER_CTRL); writel(0, timer3_va_base + TIMER_CTRL); - /* - * Make irqs happen for the system timer - */ - setup_irq(timer_irq, &realview_timer_irq); - - realview_clocksource_init(); - realview_clockevents_init(timer_irq); + sp804_clocksource_init(timer3_va_base); + sp804_clockevents_init(timer0_va_base, timer_irq); } /* diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h index 04b37a89801c..e58d0771b64e 100644 --- a/arch/arm/mach-realview/include/mach/clkdev.h +++ b/arch/arm/mach-realview/include/mach/clkdev.h @@ -1,6 +1,15 @@ #ifndef __ASM_MACH_CLKDEV_H #define __ASM_MACH_CLKDEV_H +#include <plat/clock.h> + +struct clk { + unsigned long rate; + const struct clk_ops *ops; + const struct icst_params *params; + void __iomem *vcoreg; +}; + #define __clk_get(clk) ({ 1; }) #define __clk_put(clk) do { } while (0) diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 2410d4f8ddd3..830055bb8628 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -31,6 +31,7 @@ #define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ #define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ #define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_CORE_PMU (IRQ_DC1176_GIC_START + 7) /* Core PMU interrupt */ #define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ #define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ #define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h index 86792a9f2ab6..4a88a4edb651 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pba8.h +++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h @@ -23,12 +23,6 @@ #define IRQ_PBA8_GIC_START 32 -/* L220 -#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) -#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) -#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) -*/ - /* * PB-A8 on-board gic irq sources */ @@ -65,6 +59,8 @@ #define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ #define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ +#define IRQ_PBA8_PMU (IRQ_PBA8_GIC_START + 47) /* Cortex-A8 PMU */ + /* ... */ #define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) #define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h index deaad4302b17..206a3001f46b 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pbx.h +++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h @@ -22,12 +22,6 @@ #define IRQ_PBX_GIC_START 32 -/* L220 -#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29) -#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30) -#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31) -*/ - /* * PBX on-board gic irq sources */ @@ -77,10 +71,10 @@ #define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ #define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ /* ... */ -#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ -#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45) -#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46) -#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47) +#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ +#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 45) +#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 46) +#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 47) /* ... */ #define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index 86c0c4435a46..1b77a27badaf 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -231,12 +231,6 @@ #define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ #define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE REALVIEW_BOOT_ROM_HI - /* * System controller bit assignment */ @@ -249,20 +243,6 @@ #define REALVIEW_TIMER4_EnSel 21 -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - #define REALVIEW_CSR_BASE 0x10000000 #define REALVIEW_CSR_SIZE 0x10000000 diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 7d857d300558..006765fd204c 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -32,7 +32,6 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> #include <asm/localtimer.h> @@ -44,7 +43,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_eb_io_desc[] __initdata = { { diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 44392e51dd50..217f7c19551e 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -32,7 +32,6 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> @@ -44,7 +43,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_pb1176_io_desc[] __initdata = { { diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 3e02731af959..9ef2ecc3c098 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -32,7 +32,6 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> #include <asm/localtimer.h> @@ -45,7 +44,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_pb11mp_io_desc[] __initdata = { { diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index fe4e25c4201a..2fab3a6d566b 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -31,7 +31,6 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -42,7 +41,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_pba8_io_desc[] __initdata = { { diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 03625d744857..cd412a3e0ab8 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -8,6 +8,7 @@ config MACH_U8500_MOP default y select ARM_GIC select HAS_MTU + select NOMADIK_GPIO help Include support for mop500 development platform based on U8500 architecture. The platform is based diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 803aec1d6728..4335186135e4 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -17,11 +17,9 @@ #include <linux/amba/pl022.h> #include <linux/spi/spi.h> -#include <asm/localtimer.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/mtu.h> #include <plat/i2c.h> #include <mach/hardware.h> @@ -96,7 +94,7 @@ static struct pl022_ssp_controller ssp0_platform_data = { static struct amba_device pl022_device = { .dev = { .coherent_dma_mask = ~0, - .init_name = "pl022", + .init_name = "ssp0", .platform_data = &ssp0_platform_data, }, .res = { @@ -201,22 +199,6 @@ static struct platform_device *platform_devs[] __initdata = { &i2c_controller3, }; -static void __init u8500_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - /* Setup the local timer base */ - twd_base = __io_address(U8500_TWD_BASE); -#endif - /* Setup the MTU base */ - mtu_base = __io_address(U8500_MTU0_BASE); - - nmdk_timer_init(); -} - -static struct sys_timer u8500_timer = { - .init = u8500_timer_init, -}; - static void __init u8500_init_machine(void) { int i; diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 8359a73d0041..d16b8b5ca8c7 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2009 ST-Ericsson - * heavily based on realview platform + * Copyright (C) 2009 STMicroelectronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,33 +12,130 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/mutex.h> +#include <linux/io.h> #include <asm/clkdev.h> -/* currently the clk structure - * just supports rate. This would - * be extended as and when new devices are - * added - TODO - */ -struct clk { - unsigned long rate; -}; +#include <mach/hardware.h> +#include "clock.h" + +#define PRCC_PCKEN 0x00 +#define PRCC_PCKDIS 0x04 +#define PRCC_KCKEN 0x08 +#define PRCC_KCKDIS 0x0C + +#define PRCM_YYCLKEN0_MGT_SET 0x510 +#define PRCM_YYCLKEN1_MGT_SET 0x514 +#define PRCM_YYCLKEN0_MGT_CLR 0x518 +#define PRCM_YYCLKEN1_MGT_CLR 0x51C +#define PRCM_YYCLKEN0_MGT_VAL 0x520 +#define PRCM_YYCLKEN1_MGT_VAL 0x524 + +#define PRCM_SVAMMDSPCLK_MGT 0x008 +#define PRCM_SIAMMDSPCLK_MGT 0x00C +#define PRCM_SGACLK_MGT 0x014 +#define PRCM_UARTCLK_MGT 0x018 +#define PRCM_MSP02CLK_MGT 0x01C +#define PRCM_MSP1CLK_MGT 0x288 +#define PRCM_I2CCLK_MGT 0x020 +#define PRCM_SDMMCCLK_MGT 0x024 +#define PRCM_SLIMCLK_MGT 0x028 +#define PRCM_PER1CLK_MGT 0x02C +#define PRCM_PER2CLK_MGT 0x030 +#define PRCM_PER3CLK_MGT 0x034 +#define PRCM_PER5CLK_MGT 0x038 +#define PRCM_PER6CLK_MGT 0x03C +#define PRCM_PER7CLK_MGT 0x040 +#define PRCM_LCDCLK_MGT 0x044 +#define PRCM_BMLCLK_MGT 0x04C +#define PRCM_HSITXCLK_MGT 0x050 +#define PRCM_HSIRXCLK_MGT 0x054 +#define PRCM_HDMICLK_MGT 0x058 +#define PRCM_APEATCLK_MGT 0x05C +#define PRCM_APETRACECLK_MGT 0x060 +#define PRCM_MCDECLK_MGT 0x064 +#define PRCM_IPI2CCLK_MGT 0x068 +#define PRCM_DSIALTCLK_MGT 0x06C +#define PRCM_DMACLK_MGT 0x074 +#define PRCM_B2R2CLK_MGT 0x078 +#define PRCM_TVCLK_MGT 0x07C +#define PRCM_UNIPROCLK_MGT 0x278 +#define PRCM_SSPCLK_MGT 0x280 +#define PRCM_RNGCLK_MGT 0x284 +#define PRCM_UICCCLK_MGT 0x27C + +#define PRCM_MGT_ENABLE (1 << 8) + +static DEFINE_SPINLOCK(clocks_lock); + +static void __clk_enable(struct clk *clk) +{ + if (clk->enabled++ == 0) { + if (clk->parent_cluster) + __clk_enable(clk->parent_cluster); + + if (clk->parent_periph) + __clk_enable(clk->parent_periph); + + if (clk->ops && clk->ops->enable) + clk->ops->enable(clk); + } +} int clk_enable(struct clk *clk) { + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; } EXPORT_SYMBOL(clk_enable); +static void __clk_disable(struct clk *clk) +{ + if (--clk->enabled == 0) { + if (clk->ops && clk->ops->disable) + clk->ops->disable(clk); + + if (clk->parent_periph) + __clk_disable(clk->parent_periph); + + if (clk->parent_cluster) + __clk_disable(clk->parent_cluster); + } +} + void clk_disable(struct clk *clk) { + unsigned long flags; + + WARN_ON(!clk->enabled); + + spin_lock_irqsave(&clocks_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - return clk->rate; + unsigned long rate; + + if (clk->ops && clk->ops->get_rate) + return clk->ops->get_rate(clk); + + rate = clk->rate; + if (!rate) { + if (clk->parent_periph) + rate = clk_get_rate(clk->parent_periph); + else if (clk->parent_cluster) + rate = clk_get_rate(clk->parent_cluster); + } + + return rate; } EXPORT_SYMBOL(clk_get_rate); @@ -56,37 +153,363 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); -/* ssp clock */ -static struct clk ssp_clk = { - .rate = 48000000, +static void clk_prcmu_enable(struct clk *clk) +{ + void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE) + + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off; + + writel(1 << clk->prcmu_cg_bit, cg_set_reg); +} + +static void clk_prcmu_disable(struct clk *clk) +{ + void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE) + + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off; + + writel(1 << clk->prcmu_cg_bit, cg_clr_reg); +} + +/* ED doesn't have the combined set/clr registers */ +static void clk_prcmu_ed_enable(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + clk->prcmu_cg_mgt; + + writel(readl(addr) | PRCM_MGT_ENABLE, addr); +} + +static void clk_prcmu_ed_disable(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + clk->prcmu_cg_mgt; + + writel(readl(addr) & ~PRCM_MGT_ENABLE, addr); +} + +static struct clkops clk_prcmu_ops = { + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, }; -/* fixed clock */ -static struct clk f38_clk = { - .rate = 38400000, +static unsigned int clkrst_base[] = { + [1] = U8500_CLKRST1_BASE, + [2] = U8500_CLKRST2_BASE, + [3] = U8500_CLKRST3_BASE, + [5] = U8500_CLKRST5_BASE, + [6] = U8500_CLKRST6_BASE, + [7] = U8500_CLKRST7_BASE_ED, }; -static struct clk_lookup lookups[] = { - { - /* UART0 */ - .dev_id = "uart0", - .clk = &f38_clk, - }, { /* UART1 */ - .dev_id = "uart1", - .clk = &f38_clk, - }, { /* UART2 */ - .dev_id = "uart2", - .clk = &f38_clk, - }, { /* SSP */ - .dev_id = "pl022", - .clk = &ssp_clk, - } +static void clk_prcc_enable(struct clk *clk) +{ + void __iomem *addr = __io_address(clkrst_base[clk->cluster]); + + if (clk->prcc_kernel != -1) + writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN); + + if (clk->prcc_bus != -1) + writel(1 << clk->prcc_bus, addr + PRCC_PCKEN); +} + +static void clk_prcc_disable(struct clk *clk) +{ + void __iomem *addr = __io_address(clkrst_base[clk->cluster]); + + if (clk->prcc_bus != -1) + writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS); + + if (clk->prcc_kernel != -1) + writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS); +} + +static struct clkops clk_prcc_ops = { + .enable = clk_prcc_enable, + .disable = clk_prcc_disable, +}; + +static struct clk clk_32khz = { + .rate = 32000, +}; + +/* + * PRCMU level clock gating + */ + +/* Bank 0 */ +static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK); +static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK); +static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK); +static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000); +static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK); +static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */ +static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000); +static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 50000000); +static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK); +static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK); +static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK); +static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK); +static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK); +static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000); +static DEFINE_PRCMU_CLK_RATE(per7clk, 0x0, 16, PER7CLK, 100000000); +static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK); +static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK); +static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK); +static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK); +static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK); +static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK); +static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK); +static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK); +static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK); +static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */ +static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK); +static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK); +static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK); +static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */ +static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */ + +/* Bank 1 */ +static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */ +static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ + +/* + * PRCC level clock gating + * Format: per#, clk, PCKEN bit, KCKEN bit, parent + */ + +/* Peripheral Cluster #1 */ +static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); +static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); +static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL); +static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk); +static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk); +static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk); + +/* Peripheral Cluster #2 */ + +static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL); +static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL); +static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL); +static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk); + +static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL); +static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL); +static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL); +static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk); + +/* Peripheral Cluster #3 */ +static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL); +static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk); +static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz); +static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk); +static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk); +static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL); + +/* Peripheral Cluster #4 is in the always on domain */ + +/* Peripheral Cluster #5 */ +static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL); +static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL); + +/* Peripheral Cluster #6 */ + +static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL); +static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); +static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk); +static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL); +static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL); +static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL); +static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk); + +/* Peripheral Cluster #7 */ + +static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL); +static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL); +static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); + +static struct clk_lookup u8500_common_clks[] = { + /* Peripheral Cluster #1 */ + CLK(gpio0, "gpioblock0", NULL), + CLK(slimbus0, "slimbus0", NULL), + CLK(i2c2, "nmk-i2c.2", NULL), + CLK(sdi0, "sdi0", NULL), + CLK(msp0, "msp0", NULL), + CLK(i2c1, "nmk-i2c.1", NULL), + CLK(uart1, "uart1", NULL), + CLK(uart0, "uart0", NULL), + + /* Peripheral Cluster #3 */ + CLK(gpio2, "gpioblock2", NULL), + CLK(sdi5, "sdi5", NULL), + CLK(uart2, "uart2", NULL), + CLK(ske, "ske", NULL), + CLK(sdi2, "sdi2", NULL), + CLK(i2c0, "nmk-i2c.0", NULL), + CLK(fsmc, "fsmc", NULL), + + /* Peripheral Cluster #5 */ + CLK(gpio3, "gpioblock3", NULL), + + /* Peripheral Cluster #6 */ + CLK(hash1, "hash1", NULL), + CLK(pka, "pka", NULL), + CLK(hash0, "hash0", NULL), + CLK(cryp0, "cryp0", NULL), + + /* PRCMU level clock gating */ + + /* Bank 0 */ + CLK(svaclk, "sva", NULL), + CLK(siaclk, "sia", NULL), + CLK(sgaclk, "sga", NULL), + CLK(slimclk, "slim", NULL), + CLK(lcdclk, "lcd", NULL), + CLK(bmlclk, "bml", NULL), + CLK(hsitxclk, "stm-hsi.0", NULL), + CLK(hsirxclk, "stm-hsi.1", NULL), + CLK(hdmiclk, "hdmi", NULL), + CLK(apeatclk, "apeat", NULL), + CLK(apetraceclk, "apetrace", NULL), + CLK(mcdeclk, "mcde", NULL), + CLK(ipi2clk, "ipi2", NULL), + CLK(dmaclk, "dma40", NULL), + CLK(b2r2clk, "b2r2", NULL), + CLK(tvclk, "tv", NULL), +}; + +static struct clk_lookup u8500_ed_clks[] = { + /* Peripheral Cluster #1 */ + CLK(spi3_ed, "spi3", NULL), + CLK(msp1_ed, "msp1", NULL), + + /* Peripheral Cluster #2 */ + CLK(gpio1_ed, "gpioblock1", NULL), + CLK(ssitx_ed, "ssitx", NULL), + CLK(ssirx_ed, "ssirx", NULL), + CLK(spi0_ed, "spi0", NULL), + CLK(sdi3_ed, "sdi3", NULL), + CLK(sdi1_ed, "sdi1", NULL), + CLK(msp2_ed, "msp2", NULL), + CLK(sdi4_ed, "sdi4", NULL), + CLK(pwl_ed, "pwl", NULL), + CLK(spi1_ed, "spi1", NULL), + CLK(spi2_ed, "spi2", NULL), + CLK(i2c3_ed, "nmk-i2c.3", NULL), + + /* Peripheral Cluster #3 */ + CLK(ssp1_ed, "ssp1", NULL), + CLK(ssp0_ed, "ssp0", NULL), + + /* Peripheral Cluster #5 */ + CLK(usb_ed, "musb_hdrc.0", "usb"), + + /* Peripheral Cluster #6 */ + CLK(dmc_ed, "dmc", NULL), + CLK(cryp1_ed, "cryp1", NULL), + CLK(rng_ed, "rng", NULL), + + /* Peripheral Cluster #7 */ + CLK(tzpc0_ed, "tzpc0", NULL), + CLK(mtu1_ed, "mtu1", NULL), + CLK(mtu0_ed, "mtu0", NULL), + CLK(wdg_ed, "wdg", NULL), + CLK(cfgreg_ed, "cfgreg", NULL), +}; + +static struct clk_lookup u8500_v1_clks[] = { + /* Peripheral Cluster #1 */ + CLK(i2c4, "nmk-i2c.4", NULL), + CLK(spi3_v1, "spi3", NULL), + CLK(msp1_v1, "msp1", NULL), + + /* Peripheral Cluster #2 */ + CLK(gpio1_v1, "gpioblock1", NULL), + CLK(ssitx_v1, "ssitx", NULL), + CLK(ssirx_v1, "ssirx", NULL), + CLK(spi0_v1, "spi0", NULL), + CLK(sdi3_v1, "sdi3", NULL), + CLK(sdi1_v1, "sdi1", NULL), + CLK(msp2_v1, "msp2", NULL), + CLK(sdi4_v1, "sdi4", NULL), + CLK(pwl_v1, "pwl", NULL), + CLK(spi1_v1, "spi1", NULL), + CLK(spi2_v1, "spi2", NULL), + CLK(i2c3_v1, "nmk-i2c.3", NULL), + + /* Peripheral Cluster #3 */ + CLK(ssp1_v1, "ssp1", NULL), + CLK(ssp0_v1, "ssp0", NULL), + + /* Peripheral Cluster #5 */ + CLK(usb_v1, "musb_hdrc.0", "usb"), + + /* Peripheral Cluster #6 */ + CLK(mtu1_v1, "mtu1", NULL), + CLK(mtu0_v1, "mtu0", NULL), + CLK(cfgreg_v1, "cfgreg", NULL), + CLK(hash1, "hash1", NULL), + CLK(unipro_v1, "unipro", NULL), + CLK(rng_v1, "rng", NULL), + + /* PRCMU level clock gating */ + + /* Bank 0 */ + CLK(uniproclk, "uniproclk", NULL), + CLK(dsialtclk, "dsialt", NULL), + + /* Bank 1 */ + CLK(rngclk, "rng", NULL), + CLK(uiccclk, "uicc", NULL), }; static int __init clk_init(void) { - /* register the clock lookups */ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + if (cpu_is_u8500ed()) { + clk_prcmu_ops.enable = clk_prcmu_ed_enable; + clk_prcmu_ops.disable = clk_prcmu_ed_disable; + } + + clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); + if (cpu_is_u8500ed()) + clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks)); + else + clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); + return 0; } arch_initcall(clk_init); diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h new file mode 100644 index 000000000000..e4f99b65026f --- /dev/null +++ b/arch/arm/mach-ux500/clock.h @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2010 ST-Ericsson + * Copyright (C) 2009 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/** + * struct clkops - ux500 clock operations + * @enable: function to enable the clock + * @disable: function to disable the clock + * @get_rate: function to get the current clock rate + * + * This structure contains function pointers to functions that will be used to + * control the clock. All of these functions are optional. If get_rate is + * NULL, the rate in the struct clk will be used. + */ +struct clkops { + void (*enable) (struct clk *); + void (*disable) (struct clk *); + unsigned long (*get_rate) (struct clk *); +}; + +/** + * struct clk - ux500 clock structure + * @ops: pointer to clkops struct used to control this clock + * @name: name, for debugging + * @enabled: refcount. positive if enabled, zero if disabled + * @rate: fixed rate for clocks which don't implement + * ops->getrate + * @prcmu_cg_off: address offset of the combined enable/disable register + * (used on u8500v1) + * @prcmu_cg_bit: bit in the combined enable/disable register (used on + * u8500v1) + * @prcmu_cg_mgt: address of the enable/disable register (used on + * u8500ed) + * @cluster: peripheral cluster number + * @prcc_bus: bit for the bus clock in the peripheral's CLKRST + * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST. + * -1 if no kernel clock exists. + * @parent_cluster: pointer to parent's cluster clk struct + * @parent_periph: pointer to parent's peripheral clk struct + * + * Peripherals are organised into clusters, and each cluster has an associated + * bus clock. Some peripherals also have a parent peripheral clock. + * + * In order to enable a clock for a peripheral, we need to enable: + * (1) the parent cluster (bus) clock at the PRCMU level + * (2) the parent peripheral clock (if any) at the PRCMU level + * (3) the peripheral's bus & kernel clock at the PRCC level + * + * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each + * of the cluster and peripheral clocks, and hooking these as the parents of + * the individual peripheral clocks. + * + * (3) is handled by specifying the bits in the PRCC control registers required + * to enable these clocks and modifying them in the ->enable and + * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK). + * + * This structure describes both the PRCMU-level clocks and PRCC-level clocks. + * The prcmu_* fields are only used for the PRCMU clocks, and the cluster, + * prcc, and parent pointers are only used for the PRCC-level clocks. + */ +struct clk { + const struct clkops *ops; + const char *name; + unsigned int enabled; + + unsigned long rate; + struct list_head list; + + /* These three are only for PRCMU clks */ + + unsigned int prcmu_cg_off; + unsigned int prcmu_cg_bit; + unsigned int prcmu_cg_mgt; + + /* The rest are only for PRCC clks */ + + int cluster; + unsigned int prcc_bus; + unsigned int prcc_kernel; + + struct clk *parent_cluster; + struct clk *parent_periph; +}; + +#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcmu_ops, \ + .prcmu_cg_off = _cg_off, \ + .prcmu_cg_bit = _cg_bit, \ + .prcmu_cg_mgt = PRCM_##_reg##_MGT \ + } + +#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcmu_ops, \ + .prcmu_cg_off = _cg_off, \ + .prcmu_cg_bit = _cg_bit, \ + .rate = _rate, \ + .prcmu_cg_mgt = PRCM_##_reg##_MGT \ + } + +#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcc_ops, \ + .cluster = _pclust, \ + .prcc_bus = _bus_en, \ + .prcc_kernel = _kernel_en, \ + .parent_cluster = &clk_per##_pclust##clk, \ + .parent_periph = _kernclk \ + } + +#define CLK(_clk, _devname, _conname) \ + { \ + .clk = &clk_##_clk, \ + .dev_id = _devname, \ + .con_id = _conname, \ + } diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c index 397bc1f9ed94..5fb44661adaf 100644 --- a/arch/arm/mach-ux500/cpu-u8500.c +++ b/arch/arm/mach-ux500/cpu-u8500.c @@ -13,15 +13,93 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <linux/platform_device.h> +#include <linux/io.h> +#include <asm/localtimer.h> #include <asm/hardware/gic.h> #include <asm/mach/map.h> +#include <plat/mtu.h> #include <mach/hardware.h> +#include <mach/setup.h> + +#define GPIO_RESOURCE(block) \ + { \ + .start = U8500_GPIOBANK##block##_BASE, \ + .end = U8500_GPIOBANK##block##_BASE + 127, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = IRQ_GPIO##block, \ + .end = IRQ_GPIO##block, \ + .flags = IORESOURCE_IRQ, \ + } + +#define GPIO_DEVICE(block) \ + { \ + .name = "gpio", \ + .id = block, \ + .num_resources = 2, \ + .resource = &u8500_gpio_resources[block * 2], \ + .dev = { \ + .platform_data = &u8500_gpio_data[block], \ + }, \ + } + +#define GPIO_DATA(_name, first) \ + { \ + .name = _name, \ + .first_gpio = first, \ + .first_irq = NOMADIK_GPIO_TO_IRQ(first), \ + } + +static struct nmk_gpio_platform_data u8500_gpio_data[] = { + GPIO_DATA("GPIO-0-31", 0), + GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */ + GPIO_DATA("GPIO-64-95", 64), + GPIO_DATA("GPIO-96-127", 96), /* 97..127 not routed to pin */ + GPIO_DATA("GPIO-128-159", 128), + GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */ + GPIO_DATA("GPIO-192-223", 192), + GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */ + GPIO_DATA("GPIO-256-288", 256), /* 258..288 not routed to pin */ +}; + +static struct resource u8500_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), + GPIO_RESOURCE(4), + GPIO_RESOURCE(5), + GPIO_RESOURCE(6), + GPIO_RESOURCE(7), + GPIO_RESOURCE(8), +}; + +static struct platform_device u8500_gpio_devs[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), + GPIO_DEVICE(4), + GPIO_DEVICE(5), + GPIO_DEVICE(6), + GPIO_DEVICE(7), + GPIO_DEVICE(8), +}; -/* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { - /* yet to be added, add i2c0, gpio.. */ + &u8500_gpio_devs[0], + &u8500_gpio_devs[1], + &u8500_gpio_devs[2], + &u8500_gpio_devs[3], + &u8500_gpio_devs[4], + &u8500_gpio_devs[5], + &u8500_gpio_devs[6], + &u8500_gpio_devs[7], + &u8500_gpio_devs[8], }; #define __IO_DEV_DESC(x, sz) { \ @@ -36,15 +114,38 @@ static struct map_desc u8500_io_desc[] __initdata = { __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), - __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO5_BASE, SZ_4K), +}; + +static struct map_desc u8500ed_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K), +}; + +static struct map_desc u8500v1_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_MTU0_BASE_V1, SZ_4K), }; void __init u8500_map_io(void) { iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); + + if (cpu_is_u8500ed()) + iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc)); + else + iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc)); } void __init u8500_init_irq(void) @@ -63,3 +164,22 @@ void __init u8500_init_devices(void) return ; } + +static void __init u8500_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + /* Setup the local timer base */ + twd_base = __io_address(U8500_TWD_BASE); +#endif + /* Setup the MTU base */ + if (cpu_is_u8500ed()) + mtu_base = __io_address(U8500_MTU0_BASE_ED); + else + mtu_base = __io_address(U8500_MTU0_BASE_V1); + + nmdk_timer_init(); +} + +struct sys_timer u8500_timer = { + .init = u8500_timer_init, +}; diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h new file mode 100644 index 000000000000..3c4cd31ad9f7 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -0,0 +1,12 @@ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +/* + * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough + * room for a couple of GPIO expanders. + */ +#define ARCH_NR_GPIOS 350 + +#include <plat/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 04ea836969b3..99ca89fe9b30 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -23,6 +23,8 @@ /* typesafe io address */ #define __io_address(n) __io(IO_ADDRESS(n)) +/* used by some plat-nomadik code */ +#define io_p2v(n) __io_address(n) /* * Base address definitions for U8500 Onchip IPs. All the @@ -56,16 +58,19 @@ #define U8500_TWD_SIZE 0x100 /* per7 base addressess */ -#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000) -#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000) -#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000) -#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000) -#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) +#define U8500_CR_BASE_ED (U8500_PER7_BASE + 0x8000) +#define U8500_MTU0_BASE_ED (U8500_PER7_BASE + 0xa000) +#define U8500_MTU1_BASE_ED (U8500_PER7_BASE + 0xb000) +#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE + 0xc000) +#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE + 0xf000) /* per6 base addressess */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) #define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) #define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_MTU0_BASE_V1 (U8500_PER6_BASE + 0x6000) +#define U8500_MTU1_BASE_V1 (U8500_PER6_BASE + 0x7000) +#define U8500_CR_BASE_V1 (U8500_PER6_BASE + 0x8000) #define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) #define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) @@ -125,7 +130,33 @@ #define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000) #define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) +#define U8500_GPIOBANK0_BASE U8500_GPIO1_BASE +#define U8500_GPIOBANK1_BASE (U8500_GPIO1_BASE + 0x80) +#define U8500_GPIOBANK2_BASE U8500_GPIO3_BASE +#define U8500_GPIOBANK3_BASE (U8500_GPIO3_BASE + 0x80) +#define U8500_GPIOBANK4_BASE (U8500_GPIO3_BASE + 0x100) +#define U8500_GPIOBANK5_BASE (U8500_GPIO3_BASE + 0x180) +#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE +#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) +#define U8500_GPIOBANK8_BASE U8500_GPIO5_BASE + /* ST-Ericsson modified pl022 id */ #define SSP_PER_ID 0x01080022 +#ifndef __ASSEMBLY__ + +#include <asm/cputype.h> + +static inline bool cpu_is_u8500ed(void) +{ + return (read_cpuid_id() & 15) == 0; +} + +static inline bool cpu_is_u8500v1(void) +{ + return (read_cpuid_id() & 15) == 1; +} + +#endif + #endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 394b5dd2200f..8a1f6976c245 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -66,6 +66,12 @@ /* There are 128 shared peripheral interrupts assigned to * INTID[160:32]. The first 32 interrupts are reserved. */ -#define NR_IRQS 161 +#define U8500_SOC_NR_IRQS 161 + +/* After chip-specific IRQ numbers we have the GPIO ones */ +#define NOMADIK_NR_GPIO 288 +#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS) +#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS) +#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) #endif /*ASM_ARCH_IRQS_H*/ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index cf0ce1687f24..65112bfd7a0c 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -20,4 +20,7 @@ extern void u8500_init_irq(void); /* We re-use nomadik_timer for this platform */ extern void nmdk_timer_init(void); +struct sys_timer; +extern struct sys_timer u8500_timer; + #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index ba81e70ed813..97cf4d831b0c 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c deleted file mode 100644 index c50a44ea7ee6..000000000000 --- a/arch/arm/mach-versatile/clock.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/clkdev.h> -#include <asm/hardware/icst307.h> - -#include "clock.h" - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - struct icst307_vco vco; - vco = icst307_khz_to_vco(clk->params, rate / 1000); - return icst307_khz(clk->params, vco) * 1000; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - - if (clk->setvco) { - struct icst307_vco vco; - - vco = icst307_khz_to_vco(clk->params, rate / 1000); - clk->rate = icst307_khz(clk->params, vco) * 1000; - clk->setvco(clk, vco); - ret = 0; - } - return ret; -} -EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-versatile/clock.h b/arch/arm/mach-versatile/clock.h deleted file mode 100644 index 03468fdc3e58..000000000000 --- a/arch/arm/mach-versatile/clock.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/clock.h - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct module; -struct icst307_params; - -struct clk { - unsigned long rate; - const struct icst307_params *params; - u32 oscoff; - void *data; - void (*setvco)(struct clk *, struct icst307_vco vco); -}; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 9ddb49b1cb71..60baba65635e 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -28,18 +28,14 @@ #include <linux/amba/clcd.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/cnt32_to_63.h> #include <linux/io.h> #include <asm/clkdev.h> #include <asm/system.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/leds.h> #include <asm/hardware/arm_timer.h> -#include <asm/hardware/icst307.h> +#include <asm/hardware/icst.h> #include <asm/hardware/vic.h> #include <asm/mach-types.h> @@ -48,9 +44,12 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <mach/clkdev.h> +#include <mach/hardware.h> +#include <mach/platform.h> +#include <plat/timer-sp.h> #include "core.h" -#include "clock.h" /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx @@ -58,7 +57,6 @@ * * Setup a VA for the Versatile Vectored Interrupt Controller. */ -#define __io_address(n) __io(IO_ADDRESS(n)) #define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) #define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) @@ -228,27 +226,6 @@ void __init versatile_map_io(void) iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc)); } -#define VERSATILE_REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET) - -/* - * This is the Versatile sched_clock implementation. This has - * a resolution of 41.7ns, and a maximum value of about 35583 days. - * - * The return value is guaranteed to be monotonic in that range as - * long as there is always less than 89 seconds between successive - * calls to this function. - */ -unsigned long long sched_clock(void) -{ - unsigned long long v = cnt32_to_63(readl(VERSATILE_REFCOUNTER)); - - /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ - v *= 125<<1; - do_div(v, 3<<1); - - return v; -} - #define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET) @@ -379,33 +356,40 @@ static struct mmci_platform_data mmc0_plat_data = { /* * Clock handling */ -static const struct icst307_params versatile_oscvco_params = { - .ref = 24000, - .vco_max = 200000, +static const struct icst_params versatile_oscvco_params = { + .ref = 24000000, + .vco_max = ICST307_VCO_MAX, + .vco_min = ICST307_VCO_MIN, .vd_min = 4 + 8, .vd_max = 511 + 8, .rd_min = 1 + 2, .rd_max = 127 + 2, + .s2div = icst307_s2div, + .idx2s = icst307_idx2s, }; -static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco) +static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco) { - void __iomem *sys = __io_address(VERSATILE_SYS_BASE); - void __iomem *sys_lock = sys + VERSATILE_SYS_LOCK_OFFSET; + void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET; u32 val; - val = readl(sys + clk->oscoff) & ~0x7ffff; + val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, sys_lock); - writel(val, sys + clk->oscoff); + writel(val, clk->vcoreg); writel(0, sys_lock); } +static const struct clk_ops osc4_clk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = versatile_oscvco_set, +}; + static struct clk osc4_clk = { + .ops = &osc4_clk_ops, .params = &versatile_oscvco_params, - .oscoff = VERSATILE_SYS_OSCCLCD_OFFSET, - .setvco = versatile_oscvco_set, }; /* @@ -851,6 +835,8 @@ void __init versatile_init(void) { int i; + osc4_clk.vcoreg = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET; + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); platform_device_register(&versatile_flash_device); @@ -874,120 +860,6 @@ void __init versatile_init(void) #define TIMER1_VA_BASE (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20) #define TIMER2_VA_BASE __io_address(VERSATILE_TIMER2_3_BASE) #define TIMER3_VA_BASE (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20) -#define VA_IC_BASE __io_address(VERSATILE_VIC_BASE) - -/* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) -#define TIMER_DIVISOR (TIMER_CTRL_DIV256) -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_DIVISOR (TIMER_CTRL_DIV16) -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_DIVISOR (TIMER_CTRL_DIV1) -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static void timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); - - ctrl = TIMER_CTRL_PERIODIC; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TIMER_CTRL_ONESHOT; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL); -} - -static int timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL); - - writel(evt, TIMER0_VA_BASE + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL); - - return 0; -} - -static struct clock_event_device timer0_clockevent = { - .name = "timer0", - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = timer_set_mode, - .set_next_event = timer_set_next_event, -}; - -/* - * IRQ handler for the timer - */ -static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &timer0_clockevent; - - writel(1, TIMER0_VA_BASE + TIMER_INTCLR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction versatile_timer_irq = { - .name = "Versatile Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = versatile_timer_interrupt, -}; - -static cycle_t versatile_get_cycles(struct clocksource *cs) -{ - return ~readl(TIMER3_VA_BASE + TIMER_VALUE); -} - -static struct clocksource clocksource_versatile = { - .name = "timer3", - .rating = 200, - .read = versatile_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init versatile_clocksource_init(void) -{ - /* setup timer3 as free-running clocksource */ - writel(0, TIMER3_VA_BASE + TIMER_CTRL); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE); - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - TIMER3_VA_BASE + TIMER_CTRL); - - clocksource_versatile.mult = - clocksource_khz2mult(1000, clocksource_versatile.shift); - clocksource_register(&clocksource_versatile); - - return 0; -} /* * Set up timer interrupt, and return the current time in seconds. @@ -1016,22 +888,8 @@ static void __init versatile_timer_init(void) writel(0, TIMER2_VA_BASE + TIMER_CTRL); writel(0, TIMER3_VA_BASE + TIMER_CTRL); - /* - * Make irqs happen for the system timer - */ - setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq); - - versatile_clocksource_init(); - - timer0_clockevent.mult = - div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift); - timer0_clockevent.max_delta_ns = - clockevent_delta2ns(0xffffffff, &timer0_clockevent); - timer0_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &timer0_clockevent); - - timer0_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&timer0_clockevent); + sp804_clocksource_init(TIMER3_VA_BASE); + sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1); } struct sys_timer versatile_timer = { diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h index 04b37a89801c..e58d0771b64e 100644 --- a/arch/arm/mach-versatile/include/mach/clkdev.h +++ b/arch/arm/mach-versatile/include/mach/clkdev.h @@ -1,6 +1,15 @@ #ifndef __ASM_MACH_CLKDEV_H #define __ASM_MACH_CLKDEV_H +#include <plat/clock.h> + +struct clk { + unsigned long rate; + const struct clk_ops *ops; + const struct icst_params *params; + void __iomem *vcoreg; +}; + #define __clk_get(clk) ({ 1; }) #define __clk_put(clk) do { } while (0) diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S index 8c8020980585..e6f7c1663160 100644 --- a/arch/arm/mach-versatile/include/mach/entry-macro.S +++ b/arch/arm/mach-versatile/include/mach/entry-macro.S @@ -8,6 +8,7 @@ * warranty of any kind, whether express or implied. */ #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/hardware/vic.h> .macro disable_fiq diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 7aa906c93154..4f8f99aac938 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -23,7 +23,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <mach/platform.h> /* * PCI space virtual addresses @@ -49,4 +48,6 @@ /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) +#define __io_address(n) __io(IO_ADDRESS(n)) + #endif diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h index 83207395191a..ec087407b163 100644 --- a/arch/arm/mach-versatile/include/mach/platform.h +++ b/arch/arm/mach-versatile/include/mach/platform.h @@ -205,7 +205,7 @@ #define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */ #define VERSATILE_DMAC_BASE 0x10130000 /* DMA controller */ #define VERSATILE_VIC_BASE 0x10140000 /* Vectored interrupt controller */ -#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */ +#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */ /* 0x10000000 - 0x100FFFFF */ #define VERSATILE_AHBM_BASE 0x101D0000 /* AHB monitor */ #define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ @@ -213,7 +213,7 @@ #define VERSATILE_TIMER0_1_BASE 0x101E2000 /* Timer 0 and 1 */ #define VERSATILE_TIMER2_3_BASE 0x101E3000 /* Timer 2 and 3 */ #define VERSATILE_GPIO0_BASE 0x101E4000 /* GPIO port 0 */ -#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */ +#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */ #define VERSATILE_GPIO2_BASE 0x101E6000 /* GPIO port 2 */ #define VERSATILE_GPIO3_BASE 0x101E7000 /* GPIO port 3 */ #define VERSATILE_RTC_BASE 0x101E8000 /* Real Time Clock */ @@ -379,12 +379,6 @@ #define SIC_INT_PCI3 30 -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE VERSATILE_BOOT_ROM_HI - /* * System controller bit assignment */ @@ -397,20 +391,6 @@ #define VERSATILE_TIMER4_EnSel 21 -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - #define VERSATILE_CSR_BASE 0x10000000 #define VERSATILE_CSR_SIZE 0x10000000 @@ -432,5 +412,3 @@ #endif #endif - -/* END */ diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig new file mode 100644 index 000000000000..3f19b660a165 --- /dev/null +++ b/arch/arm/mach-vexpress/Kconfig @@ -0,0 +1,9 @@ +menu "Versatile Express platform type" + depends on ARCH_VEXPRESS + +config ARCH_VEXPRESS_CA9X4 + bool "Versatile Express Cortex-A9x4 tile" + select CPU_V7 + select ARM_GIC + +endmenu diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile new file mode 100644 index 000000000000..1b71b77ade22 --- /dev/null +++ b/arch/arm/mach-vexpress/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-y := v2m.o +obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot new file mode 100644 index 000000000000..07c2d9c457ec --- /dev/null +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x60008000 +params_phys-y := 0x60000100 +initrd_phys-y := 0x60800000 diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h new file mode 100644 index 000000000000..57dd95ce41f9 --- /dev/null +++ b/arch/arm/mach-vexpress/core.h @@ -0,0 +1,26 @@ +#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000) +#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x)) + +#define AMBA_DEVICE(name,busid,base,plat) \ +struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0UL, \ + .init_name = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = base, \ + .end = base + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0UL, \ + .irq = IRQ_##base, \ + /* .dma = DMA_##base,*/ \ +} + +struct map_desc; + +void v2m_map_io(struct map_desc *tile, size_t num); +extern struct sys_timer v2m_timer; + +extern void __iomem *gic_cpu_base_addr; diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c new file mode 100644 index 000000000000..b4b0bb47c54a --- /dev/null +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -0,0 +1,216 @@ +/* + * Versatile Express Core Tile Cortex A9x4 Support + */ +#include <linux/init.h> +#include <linux/gfp.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> + +#include <asm/clkdev.h> +#include <asm/hardware/arm_timer.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach-types.h> + +#include <mach/clkdev.h> +#include <mach/ct-ca9x4.h> + +#include <plat/timer-sp.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include "core.h" + +#include <mach/motherboard.h> + +#define V2M_PA_CS7 0x10000000 + +static struct map_desc ct_ca9x4_io_desc[] __initdata = { + { + .virtual = __MMIO_P2V(CT_CA9X4_MPIC), + .pfn = __phys_to_pfn(CT_CA9X4_MPIC), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = __MMIO_P2V(CT_CA9X4_SP804_TIMER), + .pfn = __phys_to_pfn(CT_CA9X4_SP804_TIMER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = __MMIO_P2V(CT_CA9X4_L2CC), + .pfn = __phys_to_pfn(CT_CA9X4_L2CC), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init ct_ca9x4_map_io(void) +{ + v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); +} + +void __iomem *gic_cpu_base_addr; + +static void __init ct_ca9x4_init_irq(void) +{ + gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU); + gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29); + gic_cpu_init(0, gic_cpu_base_addr); +} + +#if 0 +static void ct_ca9x4_timer_init(void) +{ + writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL); + writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL); + + sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1)); + sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0); +} + +static struct sys_timer ct_ca9x4_timer = { + .init = ct_ca9x4_timer_init, +}; +#endif + +static struct clcd_panel xvga_panel = { + .mode = { + .name = "XVGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15384, + .left_margin = 168, + .right_margin = 8, + .upper_margin = 29, + .lower_margin = 3, + .hsync_len = 144, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) +{ + v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); + v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2); +} + +static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) +{ + unsigned long framesize = 1024 * 768 * 2; + dma_addr_t dma; + + fb->panel = &xvga_panel; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map frame buffer\n"); + return -ENOMEM; + } + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); +} + +static void ct_ca9x4_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +static struct clcd_board ct_ca9x4_clcd_data = { + .name = "CT-CA9X4", + .check = clcdfb_check, + .decode = clcdfb_decode, + .enable = ct_ca9x4_clcd_enable, + .setup = ct_ca9x4_clcd_setup, + .mmap = ct_ca9x4_clcd_mmap, + .remove = ct_ca9x4_clcd_remove, +}; + +static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); +static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL); +static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL); +static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL); + +static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { + &clcd_device, + &dmc_device, + &smc_device, + &gpio_device, +}; + + +static long ct_round(struct clk *clk, unsigned long rate) +{ + return rate; +} + +static int ct_set(struct clk *clk, unsigned long rate) +{ + return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate); +} + +static const struct clk_ops osc1_clk_ops = { + .round = ct_round, + .set = ct_set, +}; + +static struct clk osc1_clk = { + .ops = &osc1_clk_ops, + .rate = 24000000, +}; + +static struct clk_lookup lookups[] = { + { /* CLCD */ + .dev_id = "ct:clcd", + .clk = &osc1_clk, + }, +}; + +static void ct_ca9x4_init(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff); +#endif + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) + amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); +} + +MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") + .phys_io = V2M_UART0, + .io_pg_offst = (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = ct_ca9x4_map_io, + .init_irq = ct_ca9x4_init_irq, +#if 0 + .timer = &ct_ca9x4_timer, +#else + .timer = &v2m_timer, +#endif + .init_machine = ct_ca9x4_init, +MACHINE_END diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S new file mode 100644 index 000000000000..8a78ff68e1ee --- /dev/null +++ b/arch/arm/mach-vexpress/headsmp.S @@ -0,0 +1,39 @@ +/* + * linux/arch/arm/mach-vexpress/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Versatile Express specific entry point for secondary CPUs. This + * provides a "holding pen" into which all secondary cores are held + * until we're ready for them to initialise. + */ +ENTRY(vexpress_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-vexpress/include/mach/clkdev.h b/arch/arm/mach-vexpress/include/mach/clkdev.h new file mode 100644 index 000000000000..3f8307d73cad --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/clkdev.h @@ -0,0 +1,15 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#include <plat/clock.h> + +struct clk { + const struct clk_ops *ops; + unsigned long rate; + const struct icst_params *params; +}; + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h new file mode 100644 index 000000000000..10718e654c6a --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -0,0 +1,43 @@ +#ifndef __MACH_CT_CA9X4_H +#define __MACH_CT_CA9X4_H + +/* + * Physical base addresses + */ +#define CT_CA9X4_CLCDC (0x10020000) +#define CT_CA9X4_AXIRAM (0x10060000) +#define CT_CA9X4_DMC (0x100e0000) +#define CT_CA9X4_SMC (0x100e1000) +#define CT_CA9X4_SCC (0x100e2000) +#define CT_CA9X4_SP804_TIMER (0x100e4000) +#define CT_CA9X4_SP805_WDT (0x100e5000) +#define CT_CA9X4_TZPC (0x100e6000) +#define CT_CA9X4_GPIO (0x100e8000) +#define CT_CA9X4_FASTAXI (0x100e9000) +#define CT_CA9X4_SLOWAXI (0x100ea000) +#define CT_CA9X4_TZASC (0x100ec000) +#define CT_CA9X4_CORESIGHT (0x10200000) +#define CT_CA9X4_MPIC (0x1e000000) +#define CT_CA9X4_SYSTIMER (0x1e004000) +#define CT_CA9X4_SYSWDT (0x1e007000) +#define CT_CA9X4_L2CC (0x1e00a000) + +#define CT_CA9X4_TIMER0 (CT_CA9X4_SP804_TIMER + 0x000) +#define CT_CA9X4_TIMER1 (CT_CA9X4_SP804_TIMER + 0x020) + +#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000) +#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100) +#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200) +#define A9_MPCORE_GIC_DIST (CT_CA9X4_MPIC + 0x1000) + +/* + * Interrupts. Those in {} are for AMBA devices + */ +#define IRQ_CT_CA9X4_CLCDC { 76 } +#define IRQ_CT_CA9X4_DMC { -1 } +#define IRQ_CT_CA9X4_SMC { 77, 78 } +#define IRQ_CT_CA9X4_TIMER0 80 +#define IRQ_CT_CA9X4_TIMER1 81 +#define IRQ_CT_CA9X4_GPIO { 82 } + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S new file mode 100644 index 000000000000..5167e2aceeba --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -0,0 +1,23 @@ +/* arch/arm/mach-realview/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define DEBUG_LL_UART_OFFSET 0x00009000 + + .macro addruart,rx,tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x10000000 + movne \rx, #0xf8000000 @ virtual base + orr \rx, \rx, #DEBUG_LL_UART_OFFSET + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S new file mode 100644 index 000000000000..20e9fb514f0a --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S @@ -0,0 +1,67 @@ +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + ldr \tmp, =1021 + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm + diff --git a/arch/arm/mach-vexpress/include/mach/hardware.h b/arch/arm/mach-vexpress/include/mach/hardware.h new file mode 100644 index 000000000000..40a8c178f10d --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/hardware.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h new file mode 100644 index 000000000000..748bb524ee71 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/io.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-vexpress/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h new file mode 100644 index 000000000000..7054cbfc9de5 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/irqs.h @@ -0,0 +1,4 @@ +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 + +#define NR_IRQS 128 diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h new file mode 100644 index 000000000000..be28232ae639 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/memory.h @@ -0,0 +1,25 @@ +/* + * arch/arm/mach-vexpress/include/mach/memory.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x60000000) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h new file mode 100644 index 000000000000..98a8ded055bf --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -0,0 +1,121 @@ +#ifndef __MACH_MOTHERBOARD_H +#define __MACH_MOTHERBOARD_H + +/* + * Physical addresses, offset from V2M_PA_CS0-3 + */ +#define V2M_NOR0 (V2M_PA_CS0) +#define V2M_NOR1 (V2M_PA_CS1) +#define V2M_SRAM (V2M_PA_CS2) +#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000) +#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000) +#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000) + +/* + * Physical addresses, offset from V2M_PA_CS7 + */ +#define V2M_SYSREGS (V2M_PA_CS7 + 0x00000000) +#define V2M_SYSCTL (V2M_PA_CS7 + 0x00001000) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + 0x00002000) + +#define V2M_AACI (V2M_PA_CS7 + 0x00004000) +#define V2M_MMCI (V2M_PA_CS7 + 0x00005000) +#define V2M_KMI0 (V2M_PA_CS7 + 0x00006000) +#define V2M_KMI1 (V2M_PA_CS7 + 0x00007000) + +#define V2M_UART0 (V2M_PA_CS7 + 0x00009000) +#define V2M_UART1 (V2M_PA_CS7 + 0x0000a000) +#define V2M_UART2 (V2M_PA_CS7 + 0x0000b000) +#define V2M_UART3 (V2M_PA_CS7 + 0x0000c000) + +#define V2M_WDT (V2M_PA_CS7 + 0x0000f000) + +#define V2M_TIMER01 (V2M_PA_CS7 + 0x00011000) +#define V2M_TIMER23 (V2M_PA_CS7 + 0x00012000) + +#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + 0x00016000) +#define V2M_RTC (V2M_PA_CS7 + 0x00017000) + +#define V2M_CF (V2M_PA_CS7 + 0x0001a000) +#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000) + +#define V2M_SYS_ID (V2M_SYSREGS + 0x000) +#define V2M_SYS_SW (V2M_SYSREGS + 0x004) +#define V2M_SYS_LED (V2M_SYSREGS + 0x008) +#define V2M_SYS_100HZ (V2M_SYSREGS + 0x024) +#define V2M_SYS_FLAGS (V2M_SYSREGS + 0x030) +#define V2M_SYS_FLAGSSET (V2M_SYSREGS + 0x030) +#define V2M_SYS_FLAGSCLR (V2M_SYSREGS + 0x034) +#define V2M_SYS_NVFLAGS (V2M_SYSREGS + 0x038) +#define V2M_SYS_NVFLAGSSET (V2M_SYSREGS + 0x038) +#define V2M_SYS_NVFLAGSCLR (V2M_SYSREGS + 0x03c) +#define V2M_SYS_MCI (V2M_SYSREGS + 0x048) +#define V2M_SYS_FLASH (V2M_SYSREGS + 0x03c) +#define V2M_SYS_CFGSW (V2M_SYSREGS + 0x058) +#define V2M_SYS_24MHZ (V2M_SYSREGS + 0x05c) +#define V2M_SYS_MISC (V2M_SYSREGS + 0x060) +#define V2M_SYS_DMA (V2M_SYSREGS + 0x064) +#define V2M_SYS_PROCID0 (V2M_SYSREGS + 0x084) +#define V2M_SYS_PROCID1 (V2M_SYSREGS + 0x088) +#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) +#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) +#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) + +#define V2M_TIMER0 (V2M_TIMER01 + 0x000) +#define V2M_TIMER1 (V2M_TIMER01 + 0x020) + +#define V2M_TIMER2 (V2M_TIMER23 + 0x000) +#define V2M_TIMER3 (V2M_TIMER23 + 0x020) + + +/* + * Interrupts. Those in {} are for AMBA devices + */ +#define IRQ_V2M_WDT { (32 + 0) } +#define IRQ_V2M_TIMER0 (32 + 2) +#define IRQ_V2M_TIMER1 (32 + 2) +#define IRQ_V2M_TIMER2 (32 + 3) +#define IRQ_V2M_TIMER3 (32 + 3) +#define IRQ_V2M_RTC { (32 + 4) } +#define IRQ_V2M_UART0 { (32 + 5) } +#define IRQ_V2M_UART1 { (32 + 6) } +#define IRQ_V2M_UART2 { (32 + 7) } +#define IRQ_V2M_UART3 { (32 + 8) } +#define IRQ_V2M_MMCI { (32 + 9), (32 + 10) } +#define IRQ_V2M_AACI { (32 + 11) } +#define IRQ_V2M_KMI0 { (32 + 12) } +#define IRQ_V2M_KMI1 { (32 + 13) } +#define IRQ_V2M_CLCD { (32 + 14) } +#define IRQ_V2M_LAN9118 (32 + 15) +#define IRQ_V2M_ISP1761 (32 + 16) +#define IRQ_V2M_PCIE (32 + 17) + + +/* + * Configuration + */ +#define SYS_CFG_START (1 << 31) +#define SYS_CFG_WRITE (1 << 30) +#define SYS_CFG_OSC (1 << 20) +#define SYS_CFG_VOLT (2 << 20) +#define SYS_CFG_AMP (3 << 20) +#define SYS_CFG_TEMP (4 << 20) +#define SYS_CFG_RESET (5 << 20) +#define SYS_CFG_SCC (6 << 20) +#define SYS_CFG_MUXFPGA (7 << 20) +#define SYS_CFG_SHUTDOWN (8 << 20) +#define SYS_CFG_REBOOT (9 << 20) +#define SYS_CFG_DVIMODE (11 << 20) +#define SYS_CFG_POWER (12 << 20) +#define SYS_CFG_SITE_MB (0 << 16) +#define SYS_CFG_SITE_DB1 (1 << 16) +#define SYS_CFG_SITE_DB2 (2 << 16) +#define SYS_CFG_STACK(n) ((n) << 12) + +#define SYS_CFG_ERR (1 << 1) +#define SYS_CFG_COMPLETE (1 << 0) + +int v2m_cfg_write(u32 devfn, u32 data); +int v2m_cfg_read(u32 devfn, u32 *data); + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h new file mode 100644 index 000000000000..72a9621ed087 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/smp.h @@ -0,0 +1,21 @@ +#ifndef __MACH_SMP_H +#define __MACH_SMP_H + +#include <asm/hardware/gic.h> + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +/* + * We use IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} +#endif diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h new file mode 100644 index 000000000000..899a4e628a4c --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/system.h @@ -0,0 +1,37 @@ +/* + * arch/arm/mach-vexpress/include/mach/system.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ +} + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/timex.h b/arch/arm/mach-vexpress/include/mach/timex.h new file mode 100644 index 000000000000..00029bacd43c --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/timex.h @@ -0,0 +1,23 @@ +/* + * arch/arm/mach-vexpress/include/mach/timex.h + * + * RealView architecture timex specifications + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h new file mode 100644 index 000000000000..7972c5748d0e --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/uncompress.h @@ -0,0 +1,52 @@ +/* + * arch/arm/mach-vexpress/include/mach/uncompress.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +#define get_uart_base() (0x10000000 + 0x00009000) + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) + barrier(); + + AMBA_UART_DR(base) = c; +} + +static inline void flush(void) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-vexpress/include/mach/vmalloc.h b/arch/arm/mach-vexpress/include/mach/vmalloc.h new file mode 100644 index 000000000000..f43a36ef678b --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/vmalloc.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-vexpress/include/mach/vmalloc.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END 0xf8000000UL diff --git a/arch/arm/mach-vexpress/localtimer.c b/arch/arm/mach-vexpress/localtimer.c new file mode 100644 index 000000000000..c0e3a59a0bfc --- /dev/null +++ b/arch/arm/mach-vexpress/localtimer.c @@ -0,0 +1,26 @@ +/* + * linux/arch/arm/mach-vexpress/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/clockchips.h> + +#include <asm/smp_twd.h> +#include <asm/localtimer.h> +#include <mach/irqs.h> + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); +} diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c new file mode 100644 index 000000000000..670970699ba9 --- /dev/null +++ b/arch/arm/mach-vexpress/platsmp.c @@ -0,0 +1,190 @@ +/* + * linux/arch/arm/mach-vexpress/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <asm/localtimer.h> +#include <asm/smp_scu.h> +#include <asm/unified.h> + +#include <mach/ct-ca9x4.h> +#include <mach/motherboard.h> +#define V2M_PA_CS7 0x10000000 + +#include "core.h" + +extern void vexpress_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +static void __iomem *scu_base_addr(void) +{ + return MMIO_P2V(A9_MPCORE_SCU); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_cpu_init(0, gic_cpu_base_addr); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + smp_wmb(); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * This is really belt and braces; we hold unintended secondary + * CPUs in the holding pen until we're ready for them. However, + * since we haven't sent them a soft interrupt, they shouldn't + * be there. + */ + pen_release = cpu; + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + void __iomem *scu_base = scu_base_addr(); + unsigned int i, ncores; + + ncores = scu_base ? scu_get_core_count(scu_base) : 1; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "vexpress: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "vexpress: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = num_possible_cpus(); + unsigned int cpu = smp_processor_id(); + int i; + + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + /* + * Initialise the SCU if there are more than one CPU and let + * them know where to start. + */ + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + scu_enable(scu_base_addr()); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); + writel(BSYM(virt_to_phys(vexpress_secondary_startup)), + MMIO_P2V(V2M_SYS_FLAGSSET)); + } +} diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c new file mode 100644 index 000000000000..d250711b8c7a --- /dev/null +++ b/arch/arm/mach-vexpress/v2m.c @@ -0,0 +1,361 @@ +/* + * Versatile Express V2M Motherboard Support + */ +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/amba/mmci.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> +#include <linux/spinlock.h> +#include <linux/sysdev.h> +#include <linux/usb/isp1760.h> + +#include <asm/clkdev.h> +#include <asm/sizes.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/hardware/arm_timer.h> + +#include <mach/clkdev.h> +#include <mach/motherboard.h> + +#include <plat/timer-sp.h> + +#include "core.h" + +#define V2M_PA_CS0 0x40000000 +#define V2M_PA_CS1 0x44000000 +#define V2M_PA_CS2 0x48000000 +#define V2M_PA_CS3 0x4c000000 +#define V2M_PA_CS7 0x10000000 + +static struct map_desc v2m_io_desc[] __initdata = { + { + .virtual = __MMIO_P2V(V2M_PA_CS7), + .pfn = __phys_to_pfn(V2M_PA_CS7), + .length = SZ_128K, + .type = MT_DEVICE, + }, +}; + +void __init v2m_map_io(struct map_desc *tile, size_t num) +{ + iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); + iotable_init(tile, num); +} + + +static void v2m_timer_init(void) +{ + writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); + writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); + + sp804_clocksource_init(MMIO_P2V(V2M_TIMER1)); + sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0); +} + +struct sys_timer v2m_timer = { + .init = v2m_timer_init, +}; + + +static DEFINE_SPINLOCK(v2m_cfg_lock); + +int v2m_cfg_write(u32 devfn, u32 data) +{ + /* Configuration interface broken? */ + u32 val; + + printk("%s: writing %08x to %08x\n", __func__, data, devfn); + + devfn |= SYS_CFG_START | SYS_CFG_WRITE; + + spin_lock(&v2m_cfg_lock); + val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT)); + + writel(data, MMIO_P2V(V2M_SYS_CFGDATA)); + writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + + do { + val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + } while (val == 0); + spin_unlock(&v2m_cfg_lock); + + return !!(val & SYS_CFG_ERR); +} + +int v2m_cfg_read(u32 devfn, u32 *data) +{ + u32 val; + + devfn |= SYS_CFG_START; + + spin_lock(&v2m_cfg_lock); + writel(0, MMIO_P2V(V2M_SYS_CFGSTAT)); + writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + + mb(); + + do { + cpu_relax(); + val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + } while (val == 0); + + *data = readl(MMIO_P2V(V2M_SYS_CFGDATA)); + spin_unlock(&v2m_cfg_lock); + + return !!(val & SYS_CFG_ERR); +} + + +static struct resource v2m_pcie_i2c_resource = { + .start = V2M_SERIAL_BUS_PCI, + .end = V2M_SERIAL_BUS_PCI + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device v2m_pcie_i2c_device = { + .name = "versatile-i2c", + .id = 0, + .num_resources = 1, + .resource = &v2m_pcie_i2c_resource, +}; + +static struct resource v2m_ddc_i2c_resource = { + .start = V2M_SERIAL_BUS_DVI, + .end = V2M_SERIAL_BUS_DVI + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device v2m_ddc_i2c_device = { + .name = "versatile-i2c", + .id = 1, + .num_resources = 1, + .resource = &v2m_ddc_i2c_resource, +}; + +static struct resource v2m_eth_resources[] = { + { + .start = V2M_LAN9118, + .end = V2M_LAN9118 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_V2M_LAN9118, + .end = IRQ_V2M_LAN9118, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config v2m_eth_config = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device v2m_eth_device = { + .name = "smsc911x", + .id = -1, + .resource = v2m_eth_resources, + .num_resources = ARRAY_SIZE(v2m_eth_resources), + .dev.platform_data = &v2m_eth_config, +}; + +static struct resource v2m_usb_resources[] = { + { + .start = V2M_ISP1761, + .end = V2M_ISP1761 + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_V2M_ISP1761, + .end = IRQ_V2M_ISP1761, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct isp1760_platform_data v2m_usb_config = { + .is_isp1761 = true, + .bus_width_16 = false, + .port1_otg = true, + .analog_oc = false, + .dack_polarity_high = false, + .dreq_polarity_high = false, +}; + +static struct platform_device v2m_usb_device = { + .name = "isp1760", + .id = -1, + .resource = v2m_usb_resources, + .num_resources = ARRAY_SIZE(v2m_usb_resources), + .dev.platform_data = &v2m_usb_config, +}; + +static int v2m_flash_init(void) +{ + writel(0, MMIO_P2V(V2M_SYS_FLASH)); + return 0; +} + +static void v2m_flash_exit(void) +{ + writel(0, MMIO_P2V(V2M_SYS_FLASH)); +} + +static void v2m_flash_set_vpp(int on) +{ + writel(on != 0, MMIO_P2V(V2M_SYS_FLASH)); +} + +static struct flash_platform_data v2m_flash_data = { + .map_name = "cfi_probe", + .width = 4, + .init = v2m_flash_init, + .exit = v2m_flash_exit, + .set_vpp = v2m_flash_set_vpp, +}; + +static struct resource v2m_flash_resources[] = { + { + .start = V2M_NOR0, + .end = V2M_NOR0 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = V2M_NOR1, + .end = V2M_NOR1 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_flash_device = { + .name = "armflash", + .id = -1, + .resource = v2m_flash_resources, + .num_resources = ARRAY_SIZE(v2m_flash_resources), + .dev.platform_data = &v2m_flash_data, +}; + + +static unsigned int v2m_mmci_status(struct device *dev) +{ + return !(readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0)); +} + +static struct mmci_platform_data v2m_mmci_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = v2m_mmci_status, +}; + +static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL); +static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data); +static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL); +static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL); +static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL); +static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL); +static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL); +static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL); +static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL); +static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL); + +static struct amba_device *v2m_amba_devs[] __initdata = { + &aaci_device, + &mmci_device, + &kmi0_device, + &kmi1_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &wdt_device, + &rtc_device, +}; + + +static long v2m_osc_round(struct clk *clk, unsigned long rate) +{ + return rate; +} + +static int v2m_osc1_set(struct clk *clk, unsigned long rate) +{ + return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate); +} + +static const struct clk_ops osc1_clk_ops = { + .round = v2m_osc_round, + .set = v2m_osc1_set, +}; + +static struct clk osc1_clk = { + .ops = &osc1_clk_ops, + .rate = 24000000, +}; + +static struct clk osc2_clk = { + .rate = 24000000, +}; + +static struct clk_lookup v2m_lookups[] = { + { /* UART0 */ + .dev_id = "mb:uart0", + .clk = &osc2_clk, + }, { /* UART1 */ + .dev_id = "mb:uart1", + .clk = &osc2_clk, + }, { /* UART2 */ + .dev_id = "mb:uart2", + .clk = &osc2_clk, + }, { /* UART3 */ + .dev_id = "mb:uart3", + .clk = &osc2_clk, + }, { /* KMI0 */ + .dev_id = "mb:kmi0", + .clk = &osc2_clk, + }, { /* KMI1 */ + .dev_id = "mb:kmi1", + .clk = &osc2_clk, + }, { /* MMC0 */ + .dev_id = "mb:mmci", + .clk = &osc2_clk, + }, { /* CLCD */ + .dev_id = "mb:clcd", + .clk = &osc1_clk, + }, +}; + +static void v2m_power_off(void) +{ + if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0)) + printk(KERN_EMERG "Unable to shutdown\n"); +} + +static void v2m_restart(char str, const char *cmd) +{ + if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0)) + printk(KERN_EMERG "Unable to reboot\n"); +} + +static int __init v2m_init(void) +{ + int i; + + clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); + + platform_device_register(&v2m_pcie_i2c_device); + platform_device_register(&v2m_ddc_i2c_device); + platform_device_register(&v2m_flash_device); + platform_device_register(&v2m_eth_device); + platform_device_register(&v2m_usb_device); + + for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) + amba_device_register(v2m_amba_devs[i], &iomem_resource); + + pm_power_off = v2m_power_off; + arm_pm_restart = v2m_restart; + + return 0; +} +arch_initcall(v2m_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c4ed9f93f646..dd0a79eacbb7 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -736,6 +736,12 @@ config NEEDS_SYSCALL_FOR_CMPXCHG config OUTER_CACHE bool +config OUTER_CACHE_SYNC + bool + help + The outer cache has a outer_cache_fns.sync function pointer + that can be used to drain the write buffer of the outer cache. + config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" depends on ARCH_KIRKWOOD || ARCH_MV78XX0 @@ -754,9 +760,11 @@ config CACHE_FEROCEON_L2_WRITETHROUGH config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4 + REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \ + ARCH_NOMADIK || ARCH_OMAP4 || ARCH_VEXPRESS_CA9X4 default y select OUTER_CACHE + select OUTER_CACHE_SYNC help This option enables the L2x0 PrimeCell. @@ -781,3 +789,9 @@ config ARM_L1_CACHE_SHIFT int default 6 if ARM_L1_CACHE_SHIFT_6 default 5 + +config ARCH_HAS_BARRIERS + bool + help + This option allows the use of custom mandatory barriers + included via the mach/barriers.h file. diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 07334632d3e2..21ad68ba22ba 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -93,6 +93,15 @@ static inline void l2x0_flush_line(unsigned long addr) } #endif +static void l2x0_cache_sync(void) +{ + unsigned long flags; + + spin_lock_irqsave(&l2x0_lock, flags); + cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); +} + static inline void l2x0_inv_all(void) { unsigned long flags; @@ -225,6 +234,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) outer_cache.inv_range = l2x0_inv_range; outer_cache.clean_range = l2x0_clean_range; outer_cache.flush_range = l2x0_flush_range; + outer_cache.sync = l2x0_cache_sync; printk(KERN_INFO "L2X0 cache controller enabled\n"); } diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h index 2bbd6ed17f50..da92933a233b 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__ +#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ +#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ /* Definitions for components on the Debug board */ @@ -56,4 +56,4 @@ #define MXC_MAX_EXP_IO_LINES 16 -#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */ +#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 771532b6b4a6..5aad344d5651 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -14,7 +14,7 @@ * FB100000 70000000 1M SPBA 0 * FB000000 73F00000 1M AIPS 1 * FB200000 83F00000 1M AIPS 2 - * FA100000 8FFFC000 16K TZIC (interrupt controller) + * 8FFFC000 16K TZIC (interrupt controller) * 90000000 256M CSD0 SDRAM/DDR * A0000000 256M CSD1 SDRAM/DDR * B0000000 128M CS0 Flash @@ -23,11 +23,17 @@ * C8000000 64M CS3 Flash * CC000000 32M CS4 SRAM * CE000000 32M CS5 SRAM - * F9000000 CFFF0000 64K NFC (NAND Flash AXI) + * CFFF0000 64K NFC (NAND Flash AXI) * */ /* + * IROM + */ +#define MX51_IROM_BASE_ADDR 0x0 +#define MX51_IROM_SIZE SZ_64K + +/* * IRAM */ #define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ @@ -40,7 +46,6 @@ * NFC */ #define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ -#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000 #define MX51_NFC_AXI_SIZE SZ_64K /* @@ -49,9 +54,8 @@ #define MX51_GPU_BASE_ADDR 0x20000000 #define MX51_GPU2D_BASE_ADDR 0xD0000000 -#define MX51_TZIC_BASE_ADDR 0x8FFFC000 -#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000 -#define MX51_TZIC_SIZE SZ_16K +#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000 +#define MX51_TZIC_BASE_ADDR 0xE0000000 #define MX51_DEBUG_BASE_ADDR 0x60000000 #define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 @@ -232,12 +236,10 @@ #define MX51_IO_ADDRESS(x) \ (void __iomem *) \ (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \ MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ 0xDEADBEEF) /* @@ -246,9 +248,6 @@ #define MX51_IRAM_IO_ADDRESS(x) \ (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) -#define MX51_TZIC_IO_ADDRESS(x) \ - (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT) - #define MX51_DEBUG_IO_ADDRESS(x) \ (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) @@ -261,9 +260,6 @@ #define MX51_AIPS2_IO_ADDRESS(x) \ (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) -#define MX51_NFC_AXI_IO_ADDRESS(x) \ - (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT) - #define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 /* @@ -443,12 +439,7 @@ #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) -extern unsigned int system_rev; - -static inline unsigned int mx51_revision(void) -{ - return system_rev; -} +extern int mx51_revision(void); #endif #endif /* __ASM_ARCH_MXC_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 52e476a150ca..b6d3d0fddc48 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -66,6 +66,7 @@ static inline void flush(void) #define MX2X_UART1_BASE_ADDR 0x1000a000 #define MX3X_UART1_BASE_ADDR 0x43F90000 #define MX3X_UART2_BASE_ADDR 0x43F94000 +#define MX51_UART1_BASE_ADDR 0x73fbc000 static __inline__ void __arch_decomp_setup(unsigned long arch_id) { @@ -101,6 +102,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MAGX_ZN5: uart_base = MX3X_UART2_BASE_ADDR; break; + case MACH_TYPE_MX51_BABBAGE: + uart_base = MX51_UART1_BASE_ADDR; + break; default: break; } diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index 159daf583f85..5da3f97c537b 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -19,4 +19,9 @@ config HAS_MTU to multiple interrupt generating programmable 32-bit free running decrementing counters. +config NOMADIK_GPIO + bool + help + Support for the Nomadik GPIO controller. + endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile index 37c7cdd0f8f0..c33547361bd7 100644 --- a/arch/arm/plat-nomadik/Makefile +++ b/arch/arm/plat-nomadik/Makefile @@ -3,3 +3,4 @@ # Licensed under GPLv2 obj-$(CONFIG_HAS_MTU) += timer.o +obj-$(CONFIG_NOMADIK_GPIO) += gpio.o diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 9a09b2791e03..092f380063b3 100644 --- a/arch/arm/mach-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -13,7 +13,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/device.h> -#include <linux/amba/bus.h> +#include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/spinlock.h> @@ -36,7 +36,7 @@ struct nmk_gpio_chip { struct gpio_chip chip; void __iomem *addr; unsigned int parent_irq; - spinlock_t *lock; + spinlock_t lock; /* Keep track of configured edges */ u32 edge_rising; u32 edge_falling; @@ -211,21 +211,27 @@ static struct irq_chip nmk_gpio_irq_chip = { static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { struct nmk_gpio_chip *nmk_chip; - struct irq_chip *host_chip; + struct irq_chip *host_chip = get_irq_chip(irq); unsigned int gpio_irq; u32 pending; unsigned int first_irq; + if (host_chip->mask_ack) + host_chip->mask_ack(irq); + else { + host_chip->mask(irq); + if (host_chip->ack) + host_chip->ack(irq); + } + nmk_chip = get_irq_data(irq); first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) { gpio_irq = first_irq + __ffs(pending); generic_handle_irq(gpio_irq); } - if (0) {/* don't ack parent irq, as ack == disable */ - host_chip = get_irq_chip(irq); - host_chip->ack(irq); - } + + host_chip->unmask(irq); } static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) @@ -297,30 +303,49 @@ static struct gpio_chip nmk_gpio_template = { .can_sleep = 0, }; -static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) +static int __init nmk_gpio_probe(struct platform_device *dev) { - struct nmk_gpio_platform_data *pdata; + struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; struct nmk_gpio_chip *nmk_chip; struct gpio_chip *chip; + struct resource *res; + int irq; int ret; - pdata = dev->dev.platform_data; - ret = amba_request_regions(dev, pdata->name); - if (ret) - return ret; + if (!pdata) + return -ENODEV; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENOENT; + goto out; + } + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + ret = irq; + goto out; + } + + if (request_mem_region(res->start, resource_size(res), + dev_name(&dev->dev)) == NULL) { + ret = -EBUSY; + goto out; + } nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); if (!nmk_chip) { ret = -ENOMEM; - goto out_amba; + goto out_release; } /* * The virt address in nmk_chip->addr is in the nomadik register space, * so we can simply convert the resource address, without remapping */ - nmk_chip->addr = io_p2v(dev->res.start); + nmk_chip->addr = io_p2v(res->start); nmk_chip->chip = nmk_gpio_template; - nmk_chip->parent_irq = pdata->parent_irq; + nmk_chip->parent_irq = irq; + spin_lock_init(&nmk_chip->lock); chip = &nmk_chip->chip; chip->base = pdata->first_gpio; @@ -332,7 +357,7 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) if (ret) goto out_free; - amba_set_drvdata(dev, nmk_chip); + platform_set_drvdata(dev, nmk_chip); nmk_gpio_init_irq(nmk_chip); @@ -340,51 +365,45 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); return 0; - out_free: +out_free: kfree(nmk_chip); - out_amba: - amba_release_regions(dev); +out_release: + release_mem_region(res->start, resource_size(res)); +out: dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, pdata->first_gpio, pdata->first_gpio+31); return ret; } -static int nmk_gpio_remove(struct amba_device *dev) +static int __exit nmk_gpio_remove(struct platform_device *dev) { struct nmk_gpio_chip *nmk_chip; + struct resource *res; - nmk_chip = amba_get_drvdata(dev); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + + nmk_chip = platform_get_drvdata(dev); gpiochip_remove(&nmk_chip->chip); kfree(nmk_chip); - amba_release_regions(dev); + release_mem_region(res->start, resource_size(res)); return 0; } -/* We have 0x1f080060 and 0x1f180060, accept both using the mask */ -static struct amba_id nmk_gpio_ids[] = { - { - .id = 0x1f080060, - .mask = 0xffefffff, - }, - {0, 0}, -}; - -static struct amba_driver nmk_gpio_driver = { - .drv = { +static struct platform_driver nmk_gpio_driver = { + .driver = { .owner = THIS_MODULE, .name = "gpio", }, .probe = nmk_gpio_probe, - .remove = nmk_gpio_remove, + .remove = __exit_p(nmk_gpio_remove), .suspend = NULL, /* to be done */ .resume = NULL, - .id_table = nmk_gpio_ids, }; static int __init nmk_gpio_init(void) { - return amba_driver_register(&nmk_gpio_driver); + return platform_driver_register(&nmk_gpio_driver); } arch_initcall(nmk_gpio_init); diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h new file mode 100644 index 000000000000..4200811249ca --- /dev/null +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -0,0 +1,70 @@ +/* + * Structures and registers for GPIO access in the Nomadik SoC + * + * Copyright (C) 2008 STMicroelectronics + * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> + * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PLAT_GPIO_H +#define __ASM_PLAT_GPIO_H + +#include <asm-generic/gpio.h> + +/* + * These currently cause a function call to happen, they may be optimized + * if needed by adding cpu-specific defines to identify blocks + * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) + */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* + * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving + * the "gpio" namespace for generic and cross-machine functions + */ + +/* Register in the logic block */ +#define NMK_GPIO_DAT 0x00 +#define NMK_GPIO_DATS 0x04 +#define NMK_GPIO_DATC 0x08 +#define NMK_GPIO_PDIS 0x0c +#define NMK_GPIO_DIR 0x10 +#define NMK_GPIO_DIRS 0x14 +#define NMK_GPIO_DIRC 0x18 +#define NMK_GPIO_SLPC 0x1c +#define NMK_GPIO_AFSLA 0x20 +#define NMK_GPIO_AFSLB 0x24 + +#define NMK_GPIO_RIMSC 0x40 +#define NMK_GPIO_FIMSC 0x44 +#define NMK_GPIO_IS 0x48 +#define NMK_GPIO_IC 0x4c +#define NMK_GPIO_RWIMSC 0x50 +#define NMK_GPIO_FWIMSC 0x54 +#define NMK_GPIO_WKS 0x58 + +/* Alternate functions: function C is set in hw by setting both A and B */ +#define NMK_GPIO_ALT_GPIO 0 +#define NMK_GPIO_ALT_A 1 +#define NMK_GPIO_ALT_B 2 +#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) + +extern int nmk_gpio_set_mode(int gpio, int gpio_mode); +extern int nmk_gpio_get_mode(int gpio); + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ +struct nmk_gpio_platform_data { + char *name; + int first_gpio; + int first_irq; +}; + +#endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index fa7cb3a57cbf..db67402518a6 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -2,7 +2,7 @@ * linux/arch/arm/mach-nomadik/timer.c * * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x + * Copyright (C) 2010 Alessandro Rubini * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as @@ -18,123 +18,124 @@ #include <plat/mtu.h> -static u32 nmdk_count; /* accumulated count */ -static u32 nmdk_cycle; /* write-once */ +void __iomem *mtu_base; /* ssigned by machine code */ -/* setup by the platform code */ -void __iomem *mtu_base; - -/* - * clocksource: the MTU device is a decrementing counters, so we negate - * the value being read. - */ +/* clocksource: MTU decrements, so we negate the value being read. */ static cycle_t nmdk_read_timer(struct clocksource *cs) { - u32 count = readl(mtu_base + MTU_VAL(0)); - return nmdk_count + nmdk_cycle - count; - + return -readl(mtu_base + MTU_VAL(0)); } static struct clocksource nmdk_clksrc = { .name = "mtu_0", - .rating = 120, + .rating = 200, .read = nmdk_read_timer, + .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -/* - * Clockevent device: currently only periodic mode is supported - */ +/* Clockevent device: use one-shot mode */ static void nmdk_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) { + u32 cr; + switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* count current value? */ - writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC); + pr_err("%s: periodic mode not supported\n", __func__); break; case CLOCK_EVT_MODE_ONESHOT: - BUG(); /* Not supported, yet */ - /* FALLTHROUGH */ + /* Load highest value, enable device, enable interrupts */ + cr = readl(mtu_base + MTU_CR(1)); + writel(0, mtu_base + MTU_LR(1)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); + writel(0x2, mtu_base + MTU_IMSC); + break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: - writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC); + /* disable irq */ + writel(0, mtu_base + MTU_IMSC); break; case CLOCK_EVT_MODE_RESUME: break; } } +static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) +{ + /* writing the value has immediate effect */ + writel(evt, mtu_base + MTU_LR(1)); + return 0; +} + static struct clock_event_device nmdk_clkevt = { - .name = "mtu_0", - .features = CLOCK_EVT_FEAT_PERIODIC, + .name = "mtu_1", + .features = CLOCK_EVT_FEAT_ONESHOT, .shift = 32, - .rating = 100, + .rating = 200, .set_mode = nmdk_clkevt_mode, + .set_next_event = nmdk_clkevt_next, }; /* - * IRQ Handler for the timer 0 of the MTU block. The irq is not shared - * as we are the only users of mtu0 by now. + * IRQ Handler for timer 1 of the MTU block. */ static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) { - /* ack: "interrupt clear register" */ - writel(1 << 0, mtu_base + MTU_ICR); - - /* we can't count lost ticks, unfortunately */ - nmdk_count += nmdk_cycle; - nmdk_clkevt.event_handler(&nmdk_clkevt); + struct clock_event_device *evdev = dev_id; + writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */ + evdev->event_handler(evdev); return IRQ_HANDLED; } -/* - * Set up timer interrupt, and return the current time in seconds. - */ static struct irqaction nmdk_timer_irq = { .name = "Nomadik Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER, .handler = nmdk_timer_interrupt, + .dev_id = &nmdk_clkevt, }; -static void nmdk_timer_reset(void) -{ - u32 cr; - - writel(0, mtu_base + MTU_CR(0)); /* off */ - - /* configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS; - writel(cr, mtu_base + MTU_CR(0)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); -} - void __init nmdk_timer_init(void) { unsigned long rate; - int bits; - - rate = CLOCK_TICK_RATE; /* 2.4MHz */ - nmdk_cycle = (rate + HZ/2) / HZ; + u32 cr = MTU_CRn_32BITS;; + + /* + * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: + * use a divide-by-16 counter if it's more than 16MHz + */ + rate = CLOCK_TICK_RATE; + if (rate > 16 << 20) { + rate /= 16; + cr |= MTU_CRn_PRESCALE_16; + } else { + cr |= MTU_CRn_PRESCALE_1; + } - /* Init the timer and register clocksource */ - nmdk_timer_reset(); + /* Timer 0 is the free running clocksource */ + writel(cr, mtu_base + MTU_CR(0)); + writel(0, mtu_base + MTU_LR(0)); + writel(0, mtu_base + MTU_BGLR(0)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); - bits = 8*sizeof(nmdk_count); - nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits); if (clocksource_register(&nmdk_clksrc)) - printk(KERN_ERR "timer: failed to initialize clock " - "source %s\n", nmdk_clksrc.name); + pr_err("timer: failed to initialize clock source %s\n", + nmdk_clksrc.name); + + /* Timer 1 is used for events, fix according to rate */ + writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ + nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); + nmdk_clkevt.max_delta_ns = + clockevent_delta2ns(0xffffffff, &nmdk_clkevt); + nmdk_clkevt.min_delta_ns = + clockevent_delta2ns(0x00000002, &nmdk_clkevt); + nmdk_clkevt.cpumask = cpumask_of(0); /* Register irq and clockevents */ setup_irq(IRQ_MTU0, &nmdk_timer_irq); - nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); - nmdk_clkevt.cpumask = cpumask_of(0); clockevents_register_device(&nmdk_clkevt); } diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile new file mode 100644 index 000000000000..9b1a66816aa6 --- /dev/null +++ b/arch/arm/plat-versatile/Makefile @@ -0,0 +1,4 @@ +obj-y := clock.o +obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o +obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o +obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/plat-versatile/clock.c index 989ecf5f5c46..5c8b6564fdc2 100644 --- a/arch/arm/mach-integrator/clock.c +++ b/arch/arm/plat-versatile/clock.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-integrator/clock.c + * linux/arch/arm/plat-versatile/clock.c * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. @@ -14,7 +14,8 @@ #include <linux/clk.h> #include <linux/mutex.h> -#include <asm/clkdev.h> +#include <asm/hardware/icst.h> + #include <mach/clkdev.h> int clk_enable(struct clk *clk) @@ -36,24 +37,38 @@ EXPORT_SYMBOL(clk_get_rate); long clk_round_rate(struct clk *clk, unsigned long rate) { - struct icst525_vco vco; - vco = icst525_khz_to_vco(clk->params, rate / 1000); - return icst525_khz(clk->params, vco) * 1000; + long ret = -EIO; + if (clk->ops && clk->ops->round) + ret = clk->ops->round(clk, rate); + return ret; } EXPORT_SYMBOL(clk_round_rate); int clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EIO; - - if (clk->setvco) { - struct icst525_vco vco; - - vco = icst525_khz_to_vco(clk->params, rate / 1000); - clk->rate = icst525_khz(clk->params, vco) * 1000; - clk->setvco(clk, vco); - ret = 0; - } + if (clk->ops && clk->ops->set) + ret = clk->ops->set(clk, rate); return ret; } EXPORT_SYMBOL(clk_set_rate); + +long icst_clk_round(struct clk *clk, unsigned long rate) +{ + struct icst_vco vco; + vco = icst_hz_to_vco(clk->params, rate); + return icst_hz(clk->params, vco); +} +EXPORT_SYMBOL(icst_clk_round); + +int icst_clk_set(struct clk *clk, unsigned long rate) +{ + struct icst_vco vco; + + vco = icst_hz_to_vco(clk->params, rate); + clk->rate = icst_hz(clk->params, vco); + clk->ops->setvco(clk, vco); + + return 0; +} +EXPORT_SYMBOL(icst_clk_set); diff --git a/arch/arm/plat-versatile/include/plat/clock.h b/arch/arm/plat-versatile/include/plat/clock.h new file mode 100644 index 000000000000..3cfb024ccd70 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/clock.h @@ -0,0 +1,15 @@ +#ifndef PLAT_CLOCK_H +#define PLAT_CLOCK_H + +#include <asm/hardware/icst.h> + +struct clk_ops { + long (*round)(struct clk *, unsigned long); + int (*set)(struct clk *, unsigned long); + void (*setvco)(struct clk *, struct icst_vco); +}; + +int icst_clk_set(struct clk *, unsigned long); +long icst_clk_round(struct clk *, unsigned long); + +#endif diff --git a/arch/arm/plat-versatile/include/plat/timer-sp.h b/arch/arm/plat-versatile/include/plat/timer-sp.h new file mode 100644 index 000000000000..21e75e30d497 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/timer-sp.h @@ -0,0 +1,2 @@ +void sp804_clocksource_init(void __iomem *); +void sp804_clockevents_init(void __iomem *, unsigned int); diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c new file mode 100644 index 000000000000..9768cf7e83d7 --- /dev/null +++ b/arch/arm/plat-versatile/sched-clock.c @@ -0,0 +1,53 @@ +/* + * linux/arch/arm/plat-versatile/sched-clock.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/cnt32_to_63.h> +#include <linux/io.h> +#include <asm/div64.h> + +#include <mach/hardware.h> +#include <mach/platform.h> + +#ifdef VERSATILE_SYS_BASE +#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET) +#endif + +#ifdef REALVIEW_SYS_BASE +#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) +#endif + +/* + * This is the Realview and Versatile sched_clock implementation. This + * has a resolution of 41.7ns, and a maximum value of about 35583 days. + * + * The return value is guaranteed to be monotonic in that range as + * long as there is always less than 89 seconds between successive + * calls to this function. + */ +unsigned long long sched_clock(void) +{ + unsigned long long v = cnt32_to_63(readl(REFCOUNTER)); + + /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ + v *= 125<<1; + do_div(v, 3<<1); + + return v; +} diff --git a/arch/arm/plat-versatile/timer-sp.c b/arch/arm/plat-versatile/timer-sp.c new file mode 100644 index 000000000000..fb0d1c299718 --- /dev/null +++ b/arch/arm/plat-versatile/timer-sp.c @@ -0,0 +1,156 @@ +/* + * linux/arch/arm/plat-versatile/timer-sp.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/hardware/arm_timer.h> + +#include <plat/timer-sp.h> + +/* + * These timers are currently always setup to be clocked at 1MHz. + */ +#define TIMER_FREQ_KHZ (1000) +#define TIMER_RELOAD (TIMER_FREQ_KHZ * 1000 / HZ) + +static void __iomem *clksrc_base; + +static cycle_t sp804_read(struct clocksource *cs) +{ + return ~readl(clksrc_base + TIMER_VALUE); +} + +static struct clocksource clocksource_sp804 = { + .name = "timer3", + .rating = 200, + .read = sp804_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +void __init sp804_clocksource_init(void __iomem *base) +{ + struct clocksource *cs = &clocksource_sp804; + + clksrc_base = base; + + /* setup timer 0 as free-running clocksource */ + writel(0, clksrc_base + TIMER_CTRL); + writel(0xffffffff, clksrc_base + TIMER_LOAD); + writel(0xffffffff, clksrc_base + TIMER_VALUE); + writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, + clksrc_base + TIMER_CTRL); + + cs->mult = clocksource_khz2mult(TIMER_FREQ_KHZ, cs->shift); + clocksource_register(cs); +} + + +static void __iomem *clkevt_base; + +/* + * IRQ handler for the timer + */ +static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* clear the interrupt */ + writel(1, clkevt_base + TIMER_INTCLR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static void sp804_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE; + + writel(ctrl, clkevt_base + TIMER_CTRL); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD); + ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl |= TIMER_CTRL_ONESHOT; + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + break; + } + + writel(ctrl, clkevt_base + TIMER_CTRL); +} + +static int sp804_set_next_event(unsigned long next, + struct clock_event_device *evt) +{ + unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); + + writel(next, clkevt_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + + return 0; +} + +static struct clock_event_device sp804_clockevent = { + .name = "timer0", + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sp804_set_mode, + .set_next_event = sp804_set_next_event, + .rating = 300, + .cpumask = cpu_all_mask, +}; + +static struct irqaction sp804_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = sp804_timer_interrupt, + .dev_id = &sp804_clockevent, +}; + +void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq) +{ + struct clock_event_device *evt = &sp804_clockevent; + + clkevt_base = base; + + evt->irq = timer_irq; + evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt); + evt->min_delta_ns = clockevent_delta2ns(0xf, evt); + + setup_irq(timer_irq, &sp804_timer_irq); + clockevents_register_device(evt); +} diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 7f3f59fcaa21..a420cb949328 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -545,7 +545,7 @@ static int __init vfp_init(void) */ elf_hwcap |= HWCAP_VFP; #ifdef CONFIG_VFPv3 - if (VFP_arch >= 3) { + if (VFP_arch >= 2) { elf_hwcap |= HWCAP_VFPv3; /* diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c index d4b9c36ddc0f..bc0cfdad1cbc 100644 --- a/arch/cris/arch-v32/drivers/pci/bios.c +++ b/arch/cris/arch-v32/drivers/pci/bios.c @@ -50,7 +50,7 @@ pcibios_align_resource(void *data, const struct resource *res, if ((res->flags & IORESOURCE_IO) && (start & 0x300)) start = (start + 0x3ff) & ~0x3ff; - return start + return start; } int pcibios_enable_resources(struct pci_dev *dev, int mask) diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c index 1ed15d7fea20..6b4fb28e9f99 100644 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -41,7 +41,7 @@ pcibios_align_resource(void *data, const struct resource *res, if ((res->flags & IORESOURCE_IO) && (start & 0x300)) start = (start + 0x3ff) & ~0x3ff; - return start + return start; } @@ -94,8 +94,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) r = &dev->resource[idx]; if (!r->start) continue; - if (pci_claim_resource(dev, idx) < 0) - printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev)); + pci_claim_resource(dev, idx); } } pcibios_allocate_bus_resources(&bus->children); @@ -125,7 +124,6 @@ static void __init pcibios_allocate_resources(int pass) DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n", r->start, r->end, r->flags, disabled, pass); if (pci_claim_resource(dev, idx) < 0) { - printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev)); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; diff --git a/arch/m68k/include/asm/atomic_mm.h b/arch/m68k/include/asm/atomic_mm.h index 88b7af20a996..d9d2ed647435 100644 --- a/arch/m68k/include/asm/atomic_mm.h +++ b/arch/m68k/include/asm/atomic_mm.h @@ -148,14 +148,18 @@ static inline int atomic_xchg(atomic_t *v, int new) static inline int atomic_sub_and_test(int i, atomic_t *v) { char c; - __asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i)); + __asm__ __volatile__("subl %2,%1; seq %0" + : "=d" (c), "+m" (*v) + : "id" (i)); return c != 0; } static inline int atomic_add_negative(int i, atomic_t *v) { char c; - __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i)); + __asm__ __volatile__("addl %2,%1; smi %0" + : "=d" (c), "+m" (*v) + : "id" (i)); return c != 0; } diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index ed2b69b96805..e5ee54b0f06f 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -54,9 +54,12 @@ #define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ #define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ +#define MCFEPORT_EPPAR 0xFC088000 #define MCFEPORT_EPDDR 0xFC088002 +#define MCFEPORT_EPIER 0xFC088003 #define MCFEPORT_EPDR 0xFC088004 #define MCFEPORT_EPPDR 0xFC088005 +#define MCFEPORT_EPFR 0xFC088006 #define MCFGPIO_PODR_BUSCTL 0xFC0A4000 #define MCFGPIO_PODR_BE 0xFC0A4001 @@ -113,6 +116,7 @@ #define MCF_GPIO_PAR_UART (0xA4036) #define MCF_GPIO_PAR_FECI2C (0xA4033) +#define MCF_GPIO_PAR_QSPI (0xA4034) #define MCF_GPIO_PAR_FEC (0xA4038) #define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001) diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index a34894cf8e6f..4ab177639da2 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -110,9 +110,12 @@ * EPort */ +#define MCFEPORT_EPPAR (MCF_IPSBAR + 0x130000) #define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002) +#define MCFEPORT_EPIER (MCF_IPSBAR + 0x130003) #define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004) #define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005) +#define MCFEPORT_EPFR (MCF_IPSBAR + 0x130006) /* * Generic GPIO support @@ -127,5 +130,10 @@ #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/* + * Pin Assignment +*/ +#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A) +#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C) /****************************************************************************/ #endif /* m523xsim_h */ diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 14bce877ed88..201a710356a4 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -69,10 +69,12 @@ #define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ +#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */ /* * Define system peripheral IRQ usage. */ +#define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ @@ -126,8 +128,8 @@ * Generic GPIO support */ #define MCFGPIO_PIN_MAX 64 -#define MCFGPIO_IRQ_MAX -1 -#define MCFGPIO_IRQ_VECBASE -1 +#define MCFGPIO_IRQ_MAX MCFINTC2_GPIOIRQ7 +#define MCFGPIO_IRQ_VECBASE MCFINTC2_GPIOIRQ0 /****************************************************************************/ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 453356d72d80..26b395e41911 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -31,6 +31,7 @@ #define MCFINT_UART0 13 /* Interrupt number for UART0 */ #define MCFINT_UART1 14 /* Interrupt number for UART1 */ #define MCFINT_UART2 15 /* Interrupt number for UART2 */ +#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ /* @@ -120,6 +121,9 @@ #define MCFGPIO_PIN_MAX 100 #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE + +#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A) +#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C) #endif #ifdef CONFIG_M5275 @@ -212,15 +216,21 @@ #define MCFGPIO_PIN_MAX 148 #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE + +#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10007E) #endif /* * EPort */ +#define MCFEPORT_EPPAR (MCF_IPSBAR + 0x130000) #define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002) +#define MCFEPORT_EPIER (MCF_IPSBAR + 0x130003) #define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004) #define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005) +#define MCFEPORT_EPFR (MCF_IPSBAR + 0x130006) + /* diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index e2ad1f42b657..891cbedad972 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -29,6 +29,7 @@ #define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ /* @@ -249,70 +250,4 @@ #define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge - -/********************************************************************* -* -* Queued Serial Peripheral Interface (QSPI) Module -* -*********************************************************************/ -/* Derek - 21 Feb 2005 */ -/* change to the format used in I2C */ -/* Read/Write access macros for general use */ -#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340 -#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344 -#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348 -#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C -#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350 -#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354 -#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354 - -/* Bit level definitions and macros */ -#define MCF5282_QSPI_QMR_MSTR (0x8000) -#define MCF5282_QSPI_QMR_DOHIE (0x4000) -#define MCF5282_QSPI_QMR_BITS_16 (0x0000) -#define MCF5282_QSPI_QMR_BITS_8 (0x2000) -#define MCF5282_QSPI_QMR_BITS_9 (0x2400) -#define MCF5282_QSPI_QMR_BITS_10 (0x2800) -#define MCF5282_QSPI_QMR_BITS_11 (0x2C00) -#define MCF5282_QSPI_QMR_BITS_12 (0x3000) -#define MCF5282_QSPI_QMR_BITS_13 (0x3400) -#define MCF5282_QSPI_QMR_BITS_14 (0x3800) -#define MCF5282_QSPI_QMR_BITS_15 (0x3C00) -#define MCF5282_QSPI_QMR_CPOL (0x0200) -#define MCF5282_QSPI_QMR_CPHA (0x0100) -#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QDLYR_SPE (0x80) -#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) -#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QWR_HALT (0x8000) -#define MCF5282_QSPI_QWR_WREN (0x4000) -#define MCF5282_QSPI_QWR_WRTO (0x2000) -#define MCF5282_QSPI_QWR_CSIV (0x1000) -#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) -#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) -#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F)) - -#define MCF5282_QSPI_QIR_WCEFB (0x8000) -#define MCF5282_QSPI_QIR_ABRTB (0x4000) -#define MCF5282_QSPI_QIR_ABRTL (0x1000) -#define MCF5282_QSPI_QIR_WCEFE (0x0800) -#define MCF5282_QSPI_QIR_ABRTE (0x0400) -#define MCF5282_QSPI_QIR_SPIFE (0x0100) -#define MCF5282_QSPI_QIR_WCEF (0x0008) -#define MCF5282_QSPI_QIR_ABRT (0x0004) -#define MCF5282_QSPI_QIR_SPIF (0x0001) - -#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F)) - -#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00)) -#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8) -#define MCF5282_QSPI_QCR_CONT (0x8000) -#define MCF5282_QSPI_QCR_BITSE (0x4000) -#define MCF5282_QSPI_QCR_DT (0x2000) -#define MCF5282_QSPI_QCR_DSCK (0x1000) -#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8) - -/****************************************************************************/ #endif /* m528xsim_h */ diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index 36bf15aec9ae..c4bf1c81e3cf 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -17,6 +17,7 @@ #define MCFINT_UART0 26 /* Interrupt number for UART0 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */ +#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ #define MCF_WTM_WCR MCF_REG16(0xFC098000) diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h new file mode 100644 index 000000000000..39d90d51111d --- /dev/null +++ b/arch/m68k/include/asm/mcfqspi.h @@ -0,0 +1,64 @@ +/* + * Definitions for Freescale Coldfire QSPI module + * + * Copyright 2010 Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * +*/ + +#ifndef mcfqspi_h +#define mcfqspi_h + +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) +#elif defined(CONFIG_M5249) +#define MCFQSPI_IOBASE (MCF_MBAR + 0x300) +#elif defined(CONFIG_M520x) || defined(CONFIG_M532x) +#define MCFQSPI_IOBASE 0xFC058000 +#endif +#define MCFQSPI_IOSIZE 0x40 + +/** + * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver + * @setup: setup the control; allocate gpio's, etc. May be NULL. + * @teardown: finish with the control; free gpio's, etc. May be NULL. + * @select: output the signals to select the device. Can not be NULL. + * @deselect: output the signals to deselect the device. Can not be NULL. + * + * The QSPI module has 4 hardware chip selects. We don't use them. Instead + * platforms are required to supply a mcfqspi_cs_control as a part of the + * platform data for each QSPI master controller. Only the select and + * deselect functions are required. +*/ +struct mcfqspi_cs_control { + int (*setup)(struct mcfqspi_cs_control *); + void (*teardown)(struct mcfqspi_cs_control *); + void (*select)(struct mcfqspi_cs_control *, u8, bool); + void (*deselect)(struct mcfqspi_cs_control *, u8, bool); +}; + +/** + * struct mcfqspi_platform_data - platform data for the coldfire qspi driver + * @bus_num: board specific identifier for this qspi driver. + * @num_chipselects: number of chip selects supported by this qspi driver. + * @cs_control: platform dependent chip select control. +*/ +struct mcfqspi_platform_data { + s16 bus_num; + u16 num_chipselect; + struct mcfqspi_cs_control *cs_control; +}; + +#endif /* mcfqspi_h */ diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h index 1320eaa4cc2a..a29dd74a17cb 100644 --- a/arch/m68k/include/asm/sigcontext.h +++ b/arch/m68k/include/asm/sigcontext.h @@ -17,13 +17,11 @@ struct sigcontext { #ifndef __uClinux__ # ifdef __mcoldfire__ unsigned long sc_fpregs[2][2]; /* room for two fp registers */ - unsigned long sc_fpcntl[3]; - unsigned char sc_fpstate[16+6*8]; # else unsigned long sc_fpregs[2*3]; /* room for two fp registers */ +# endif unsigned long sc_fpcntl[3]; unsigned char sc_fpstate[216]; -# endif #endif }; diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 064f5913db1a..63be09e58d4a 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -59,6 +59,10 @@ config GENERIC_HARDIRQS bool default y +config GENERIC_HARDIRQS_NO__DO_IRQ + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile index ce404bc9ccbd..14042574ac21 100644 --- a/arch/m68knommu/Makefile +++ b/arch/m68knommu/Makefile @@ -94,7 +94,7 @@ cflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200) cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307) cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200) cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307) -cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5271,-m5200) +cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307) cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307) cflags-$(CONFIG_M528x) := $(call cc-option,-m528x,-m5307) cflags-$(CONFIG_M5307) := $(call cc-option,-m5307,-m5200) diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S index 56043ade3941..aff6f57ef8b5 100644 --- a/arch/m68knommu/kernel/entry.S +++ b/arch/m68knommu/kernel/entry.S @@ -145,6 +145,6 @@ ENTRY(ret_from_user_signal) trap #0 ENTRY(ret_from_user_rt_signal) - move #__NR_rt_sigreturn,%d0 + movel #__NR_rt_sigreturn,%d0 trap #0 diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c index 92614de42cd3..71d2ba474c63 100644 --- a/arch/m68knommu/platform/520x/config.c +++ b/arch/m68knommu/platform/520x/config.c @@ -15,10 +15,13 @@ #include <linux/param.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> +#include <asm/mcfqspi.h> /***************************************************************************/ @@ -74,9 +77,152 @@ static struct platform_device m520x_fec = { .resource = m520x_fec_resources, }; +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) +static struct resource m520x_qspi_resources[] = { + { + .start = MCFQSPI_IOBASE, + .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MCFINT_VECBASE + MCFINT_QSPI, + .end = MCFINT_VECBASE + MCFINT_QSPI, + .flags = IORESOURCE_IRQ, + }, +}; + +#define MCFQSPI_CS0 62 +#define MCFQSPI_CS1 63 +#define MCFQSPI_CS2 44 + +static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control) +{ + int status; + + status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); + goto fail0; + } + status = gpio_direction_output(MCFQSPI_CS0, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); + goto fail1; + } + + status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); + goto fail1; + } + status = gpio_direction_output(MCFQSPI_CS1, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); + goto fail2; + } + + status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); + goto fail2; + } + status = gpio_direction_output(MCFQSPI_CS2, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); + goto fail3; + } + + return 0; + +fail3: + gpio_free(MCFQSPI_CS2); +fail2: + gpio_free(MCFQSPI_CS1); +fail1: + gpio_free(MCFQSPI_CS0); +fail0: + return status; +} + +static void m520x_cs_teardown(struct mcfqspi_cs_control *cs_control) +{ + gpio_free(MCFQSPI_CS2); + gpio_free(MCFQSPI_CS1); + gpio_free(MCFQSPI_CS0); +} + +static void m520x_cs_select(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, cs_high); + break; + } +} + +static void m520x_cs_deselect(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, !cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, !cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, !cs_high); + break; + } +} + +static struct mcfqspi_cs_control m520x_cs_control = { + .setup = m520x_cs_setup, + .teardown = m520x_cs_teardown, + .select = m520x_cs_select, + .deselect = m520x_cs_deselect, +}; + +static struct mcfqspi_platform_data m520x_qspi_data = { + .bus_num = 0, + .num_chipselect = 3, + .cs_control = &m520x_cs_control, +}; + +static struct platform_device m520x_qspi = { + .name = "mcfqspi", + .id = 0, + .num_resources = ARRAY_SIZE(m520x_qspi_resources), + .resource = m520x_qspi_resources, + .dev.platform_data = &m520x_qspi_data, +}; + +static void __init m520x_qspi_init(void) +{ + u16 par; + /* setup Port QS for QSPI with gpio CS control */ + writeb(0x3f, MCF_IPSBAR + MCF_GPIO_PAR_QSPI); + /* make U1CTS and U2RTS gpio for cs_control */ + par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); + par &= 0x00ff; + writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART); +} +#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ + + static struct platform_device *m520x_devices[] __initdata = { &m520x_uart, &m520x_fec, +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + &m520x_qspi, +#endif }; /***************************************************************************/ @@ -147,6 +293,9 @@ void __init config_BSP(char *commandp, int size) mach_reset = m520x_cpu_reset; m520x_uarts_init(); m520x_fec_init(); +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + m520x_qspi_init(); +#endif } /***************************************************************************/ diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c index 6ba84f2aa397..8980f6d7715a 100644 --- a/arch/m68knommu/platform/523x/config.c +++ b/arch/m68knommu/platform/523x/config.c @@ -16,10 +16,13 @@ #include <linux/param.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> +#include <asm/mcfqspi.h> /***************************************************************************/ @@ -75,9 +78,173 @@ static struct platform_device m523x_fec = { .resource = m523x_fec_resources, }; +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) +static struct resource m523x_qspi_resources[] = { + { + .start = MCFQSPI_IOBASE, + .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MCFINT_VECBASE + MCFINT_QSPI, + .end = MCFINT_VECBASE + MCFINT_QSPI, + .flags = IORESOURCE_IRQ, + }, +}; + +#define MCFQSPI_CS0 91 +#define MCFQSPI_CS1 92 +#define MCFQSPI_CS2 103 +#define MCFQSPI_CS3 99 + +static int m523x_cs_setup(struct mcfqspi_cs_control *cs_control) +{ + int status; + + status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); + goto fail0; + } + status = gpio_direction_output(MCFQSPI_CS0, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); + goto fail1; + } + + status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); + goto fail1; + } + status = gpio_direction_output(MCFQSPI_CS1, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); + goto fail2; + } + + status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); + goto fail2; + } + status = gpio_direction_output(MCFQSPI_CS2, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); + goto fail3; + } + + status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS3 failed\n"); + goto fail3; + } + status = gpio_direction_output(MCFQSPI_CS3, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n"); + goto fail4; + } + + return 0; + +fail4: + gpio_free(MCFQSPI_CS3); +fail3: + gpio_free(MCFQSPI_CS2); +fail2: + gpio_free(MCFQSPI_CS1); +fail1: + gpio_free(MCFQSPI_CS0); +fail0: + return status; +} + +static void m523x_cs_teardown(struct mcfqspi_cs_control *cs_control) +{ + gpio_free(MCFQSPI_CS3); + gpio_free(MCFQSPI_CS2); + gpio_free(MCFQSPI_CS1); + gpio_free(MCFQSPI_CS0); +} + +static void m523x_cs_select(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, cs_high); + break; + case 3: + gpio_set_value(MCFQSPI_CS3, cs_high); + break; + } +} + +static void m523x_cs_deselect(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, !cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, !cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, !cs_high); + break; + case 3: + gpio_set_value(MCFQSPI_CS3, !cs_high); + break; + } +} + +static struct mcfqspi_cs_control m523x_cs_control = { + .setup = m523x_cs_setup, + .teardown = m523x_cs_teardown, + .select = m523x_cs_select, + .deselect = m523x_cs_deselect, +}; + +static struct mcfqspi_platform_data m523x_qspi_data = { + .bus_num = 0, + .num_chipselect = 4, + .cs_control = &m523x_cs_control, +}; + +static struct platform_device m523x_qspi = { + .name = "mcfqspi", + .id = 0, + .num_resources = ARRAY_SIZE(m523x_qspi_resources), + .resource = m523x_qspi_resources, + .dev.platform_data = &m523x_qspi_data, +}; + +static void __init m523x_qspi_init(void) +{ + u16 par; + + /* setup QSPS pins for QSPI with gpio CS control */ + writeb(0x1f, MCFGPIO_PAR_QSPI); + /* and CS2 & CS3 as gpio */ + par = readw(MCFGPIO_PAR_TIMER); + par &= 0x3f3f; + writew(par, MCFGPIO_PAR_TIMER); +} +#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ + static struct platform_device *m523x_devices[] __initdata = { &m523x_uart, &m523x_fec, +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + &m523x_qspi, +#endif }; /***************************************************************************/ @@ -114,6 +281,9 @@ void __init config_BSP(char *commandp, int size) static int __init init_BSP(void) { m523x_fec_init(); +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + m523x_qspi_init(); +#endif platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices)); return 0; } diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c index 646f5ba462fc..72fc4ae0e663 100644 --- a/arch/m68knommu/platform/5249/config.c +++ b/arch/m68knommu/platform/5249/config.c @@ -12,10 +12,13 @@ #include <linux/param.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> +#include <asm/mcfqspi.h> /***************************************************************************/ @@ -37,8 +40,169 @@ static struct platform_device m5249_uart = { .dev.platform_data = m5249_uart_platform, }; +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) +static struct resource m5249_qspi_resources[] = { + { + .start = MCFQSPI_IOBASE, + .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MCF_IRQ_QSPI, + .end = MCF_IRQ_QSPI, + .flags = IORESOURCE_IRQ, + }, +}; + +#define MCFQSPI_CS0 29 +#define MCFQSPI_CS1 24 +#define MCFQSPI_CS2 21 +#define MCFQSPI_CS3 22 + +static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control) +{ + int status; + + status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); + goto fail0; + } + status = gpio_direction_output(MCFQSPI_CS0, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); + goto fail1; + } + + status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); + goto fail1; + } + status = gpio_direction_output(MCFQSPI_CS1, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); + goto fail2; + } + + status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); + goto fail2; + } + status = gpio_direction_output(MCFQSPI_CS2, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); + goto fail3; + } + + status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS3 failed\n"); + goto fail3; + } + status = gpio_direction_output(MCFQSPI_CS3, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n"); + goto fail4; + } + + return 0; + +fail4: + gpio_free(MCFQSPI_CS3); +fail3: + gpio_free(MCFQSPI_CS2); +fail2: + gpio_free(MCFQSPI_CS1); +fail1: + gpio_free(MCFQSPI_CS0); +fail0: + return status; +} + +static void m5249_cs_teardown(struct mcfqspi_cs_control *cs_control) +{ + gpio_free(MCFQSPI_CS3); + gpio_free(MCFQSPI_CS2); + gpio_free(MCFQSPI_CS1); + gpio_free(MCFQSPI_CS0); +} + +static void m5249_cs_select(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, cs_high); + break; + case 3: + gpio_set_value(MCFQSPI_CS3, cs_high); + break; + } +} + +static void m5249_cs_deselect(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, !cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, !cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, !cs_high); + break; + case 3: + gpio_set_value(MCFQSPI_CS3, !cs_high); + break; + } +} + +static struct mcfqspi_cs_control m5249_cs_control = { + .setup = m5249_cs_setup, + .teardown = m5249_cs_teardown, + .select = m5249_cs_select, + .deselect = m5249_cs_deselect, +}; + +static struct mcfqspi_platform_data m5249_qspi_data = { + .bus_num = 0, + .num_chipselect = 4, + .cs_control = &m5249_cs_control, +}; + +static struct platform_device m5249_qspi = { + .name = "mcfqspi", + .id = 0, + .num_resources = ARRAY_SIZE(m5249_qspi_resources), + .resource = m5249_qspi_resources, + .dev.platform_data = &m5249_qspi_data, +}; + +static void __init m5249_qspi_init(void) +{ + /* QSPI irq setup */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0, + MCF_MBAR + MCFSIM_QSPIICR); + mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); +} +#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ + + static struct platform_device *m5249_devices[] __initdata = { &m5249_uart, +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + &m5249_qspi, +#endif }; /***************************************************************************/ @@ -100,6 +264,9 @@ void __init config_BSP(char *commandp, int size) mach_reset = m5249_cpu_reset; m5249_timers_init(); m5249_uarts_init(); +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + m5249_qspi_init(); +#endif } /***************************************************************************/ diff --git a/arch/m68knommu/platform/5272/intc.c b/arch/m68knommu/platform/5272/intc.c index 7081e0a9720e..2889f7d7cf70 100644 --- a/arch/m68knommu/platform/5272/intc.c +++ b/arch/m68knommu/platform/5272/intc.c @@ -103,8 +103,26 @@ static void intc_irq_ack(unsigned int irq) static int intc_irq_set_type(unsigned int irq, unsigned int type) { - /* We can set the edge type here for external interrupts */ - return 0; + /* set the edge type for external interrupts */ + u32 pitr; + + if ((type != IRQF_TRIGGER_RISING) || (type != IRQF_TRIGGER_FALLING)) + return -EINVAL; + + switch (irq) { + case MCF_IRQ_EINT1 ... MCF_IRQ_EINT4: + case MCF_IRQ_EINT5 ... MCF_IRQ_EINT6: + pitr = __raw_readl(MCFSIM_PITR); + if (type & IRQF_TRIGGER_RISING) + pitr |= 1 << (96 - irq); + else + pitr &= ~(1 << (96 - irq)); + __raw_writel(pitr, MCFSIM_PITR); + + return 0; + default: + return -EINVAL; + } } static struct irq_chip intc_irq_chip = { @@ -128,11 +146,16 @@ void __init init_IRQ(void) writel(0x88888888, MCF_MBAR + MCFSIM_ICR4); for (irq = 0; (irq < NR_IRQS); irq++) { - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = NULL; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &intc_irq_chip; - intc_irq_set_type(irq, 0); + switch (irq) { + case MCF_IRQ_EINT1 ... MCF_IRQ_EINT4: + case MCF_IRQ_EINT5 ... MCF_IRQ_EINT6: + set_irq_chip_and_handler(irq, &intc_irq_chip, + handle_edge_irq); + break; + default: + set_irq_chip_and_handler(irq, &intc_irq_chip, + handle_level_irq); + break; + } } } - diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c index fa51be172830..3d9c35c98b98 100644 --- a/arch/m68knommu/platform/527x/config.c +++ b/arch/m68knommu/platform/527x/config.c @@ -16,10 +16,13 @@ #include <linux/param.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> +#include <asm/mcfqspi.h> /***************************************************************************/ @@ -106,12 +109,188 @@ static struct platform_device m527x_fec[] = { }, }; +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) +static struct resource m527x_qspi_resources[] = { + { + .start = MCFQSPI_IOBASE, + .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MCFINT_VECBASE + MCFINT_QSPI, + .end = MCFINT_VECBASE + MCFINT_QSPI, + .flags = IORESOURCE_IRQ, + }, +}; + +#if defined(CONFIG_M5271) +#define MCFQSPI_CS0 91 +#define MCFQSPI_CS1 92 +#define MCFQSPI_CS2 99 +#define MCFQSPI_CS3 103 +#elif defined(CONFIG_M5275) +#define MCFQSPI_CS0 59 +#define MCFQSPI_CS1 60 +#define MCFQSPI_CS2 61 +#define MCFQSPI_CS3 62 +#endif + +static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control) +{ + int status; + + status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); + goto fail0; + } + status = gpio_direction_output(MCFQSPI_CS0, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); + goto fail1; + } + + status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); + goto fail1; + } + status = gpio_direction_output(MCFQSPI_CS1, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); + goto fail2; + } + + status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); + goto fail2; + } + status = gpio_direction_output(MCFQSPI_CS2, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); + goto fail3; + } + + status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS3 failed\n"); + goto fail3; + } + status = gpio_direction_output(MCFQSPI_CS3, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n"); + goto fail4; + } + + return 0; + +fail4: + gpio_free(MCFQSPI_CS3); +fail3: + gpio_free(MCFQSPI_CS2); +fail2: + gpio_free(MCFQSPI_CS1); +fail1: + gpio_free(MCFQSPI_CS0); +fail0: + return status; +} + +static void m527x_cs_teardown(struct mcfqspi_cs_control *cs_control) +{ + gpio_free(MCFQSPI_CS3); + gpio_free(MCFQSPI_CS2); + gpio_free(MCFQSPI_CS1); + gpio_free(MCFQSPI_CS0); +} + +static void m527x_cs_select(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, cs_high); + break; + case 3: + gpio_set_value(MCFQSPI_CS3, cs_high); + break; + } +} + +static void m527x_cs_deselect(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, !cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, !cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, !cs_high); + break; + case 3: + gpio_set_value(MCFQSPI_CS3, !cs_high); + break; + } +} + +static struct mcfqspi_cs_control m527x_cs_control = { + .setup = m527x_cs_setup, + .teardown = m527x_cs_teardown, + .select = m527x_cs_select, + .deselect = m527x_cs_deselect, +}; + +static struct mcfqspi_platform_data m527x_qspi_data = { + .bus_num = 0, + .num_chipselect = 4, + .cs_control = &m527x_cs_control, +}; + +static struct platform_device m527x_qspi = { + .name = "mcfqspi", + .id = 0, + .num_resources = ARRAY_SIZE(m527x_qspi_resources), + .resource = m527x_qspi_resources, + .dev.platform_data = &m527x_qspi_data, +}; + +static void __init m527x_qspi_init(void) +{ +#if defined(CONFIG_M5271) + u16 par; + + /* setup QSPS pins for QSPI with gpio CS control */ + writeb(0x1f, MCFGPIO_PAR_QSPI); + /* and CS2 & CS3 as gpio */ + par = readw(MCFGPIO_PAR_TIMER); + par &= 0x3f3f; + writew(par, MCFGPIO_PAR_TIMER); +#elif defined(CONFIG_M5275) + /* setup QSPS pins for QSPI with gpio CS control */ + writew(0x003e, MCFGPIO_PAR_QSPI); +#endif +} +#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ + static struct platform_device *m527x_devices[] __initdata = { &m527x_uart, &m527x_fec[0], #ifdef CONFIG_FEC2 &m527x_fec[1], #endif +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + &m527x_qspi, +#endif }; /***************************************************************************/ @@ -187,6 +366,9 @@ void __init config_BSP(char *commandp, int size) mach_reset = m527x_cpu_reset; m527x_uarts_init(); m527x_fec_init(); +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + m527x_qspi_init(); +#endif } /***************************************************************************/ diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c index 6e608d1836f1..76b743343bfa 100644 --- a/arch/m68knommu/platform/528x/config.c +++ b/arch/m68knommu/platform/528x/config.c @@ -17,10 +17,13 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> +#include <asm/mcfqspi.h> /***************************************************************************/ @@ -76,10 +79,141 @@ static struct platform_device m528x_fec = { .resource = m528x_fec_resources, }; +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) +static struct resource m528x_qspi_resources[] = { + { + .start = MCFQSPI_IOBASE, + .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MCFINT_VECBASE + MCFINT_QSPI, + .end = MCFINT_VECBASE + MCFINT_QSPI, + .flags = IORESOURCE_IRQ, + }, +}; + +#define MCFQSPI_CS0 147 +#define MCFQSPI_CS1 148 +#define MCFQSPI_CS2 149 +#define MCFQSPI_CS3 150 + +static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control) +{ + int status; + + status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); + goto fail0; + } + status = gpio_direction_output(MCFQSPI_CS0, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); + goto fail1; + } + + status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); + goto fail1; + } + status = gpio_direction_output(MCFQSPI_CS1, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); + goto fail2; + } + + status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); + goto fail2; + } + status = gpio_direction_output(MCFQSPI_CS2, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); + goto fail3; + } + + status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS3 failed\n"); + goto fail3; + } + status = gpio_direction_output(MCFQSPI_CS3, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n"); + goto fail4; + } + + return 0; + +fail4: + gpio_free(MCFQSPI_CS3); +fail3: + gpio_free(MCFQSPI_CS2); +fail2: + gpio_free(MCFQSPI_CS1); +fail1: + gpio_free(MCFQSPI_CS0); +fail0: + return status; +} + +static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control) +{ + gpio_free(MCFQSPI_CS3); + gpio_free(MCFQSPI_CS2); + gpio_free(MCFQSPI_CS1); + gpio_free(MCFQSPI_CS0); +} + +static void m528x_cs_select(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high); +} + +static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high); +} + +static struct mcfqspi_cs_control m528x_cs_control = { + .setup = m528x_cs_setup, + .teardown = m528x_cs_teardown, + .select = m528x_cs_select, + .deselect = m528x_cs_deselect, +}; + +static struct mcfqspi_platform_data m528x_qspi_data = { + .bus_num = 0, + .num_chipselect = 4, + .cs_control = &m528x_cs_control, +}; + +static struct platform_device m528x_qspi = { + .name = "mcfqspi", + .id = 0, + .num_resources = ARRAY_SIZE(m528x_qspi_resources), + .resource = m528x_qspi_resources, + .dev.platform_data = &m528x_qspi_data, +}; + +static void __init m528x_qspi_init(void) +{ + /* setup Port QS for QSPI with gpio CS control */ + __raw_writeb(0x07, MCFGPIO_PQSPAR); +} +#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ static struct platform_device *m528x_devices[] __initdata = { &m528x_uart, &m528x_fec, +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + &m528x_qspi, +#endif }; /***************************************************************************/ @@ -174,6 +308,9 @@ static int __init init_BSP(void) mach_reset = m528x_cpu_reset; m528x_uarts_init(); m528x_fec_init(); +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + m528x_qspi_init(); +#endif platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices)); return 0; } diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c index d632948e64e5..ca51323f957b 100644 --- a/arch/m68knommu/platform/532x/config.c +++ b/arch/m68knommu/platform/532x/config.c @@ -21,12 +21,15 @@ #include <linux/param.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> #include <asm/mcfdma.h> #include <asm/mcfwdebug.h> +#include <asm/mcfqspi.h> /***************************************************************************/ @@ -82,9 +85,127 @@ static struct platform_device m532x_fec = { .resource = m532x_fec_resources, }; +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) +static struct resource m532x_qspi_resources[] = { + { + .start = MCFQSPI_IOBASE, + .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MCFINT_VECBASE + MCFINT_QSPI, + .end = MCFINT_VECBASE + MCFINT_QSPI, + .flags = IORESOURCE_IRQ, + }, +}; + +#define MCFQSPI_CS0 84 +#define MCFQSPI_CS1 85 +#define MCFQSPI_CS2 86 + +static int m532x_cs_setup(struct mcfqspi_cs_control *cs_control) +{ + int status; + + status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); + goto fail0; + } + status = gpio_direction_output(MCFQSPI_CS0, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); + goto fail1; + } + + status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); + goto fail1; + } + status = gpio_direction_output(MCFQSPI_CS1, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); + goto fail2; + } + + status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); + goto fail2; + } + status = gpio_direction_output(MCFQSPI_CS2, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); + goto fail3; + } + + return 0; + +fail3: + gpio_free(MCFQSPI_CS2); +fail2: + gpio_free(MCFQSPI_CS1); +fail1: + gpio_free(MCFQSPI_CS0); +fail0: + return status; +} + +static void m532x_cs_teardown(struct mcfqspi_cs_control *cs_control) +{ + gpio_free(MCFQSPI_CS2); + gpio_free(MCFQSPI_CS1); + gpio_free(MCFQSPI_CS0); +} + +static void m532x_cs_select(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high); +} + +static void m532x_cs_deselect(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high); +} + +static struct mcfqspi_cs_control m532x_cs_control = { + .setup = m532x_cs_setup, + .teardown = m532x_cs_teardown, + .select = m532x_cs_select, + .deselect = m532x_cs_deselect, +}; + +static struct mcfqspi_platform_data m532x_qspi_data = { + .bus_num = 0, + .num_chipselect = 3, + .cs_control = &m532x_cs_control, +}; + +static struct platform_device m532x_qspi = { + .name = "mcfqspi", + .id = 0, + .num_resources = ARRAY_SIZE(m532x_qspi_resources), + .resource = m532x_qspi_resources, + .dev.platform_data = &m532x_qspi_data, +}; + +static void __init m532x_qspi_init(void) +{ + /* setup QSPS pins for QSPI with gpio CS control */ + writew(0x01f0, MCF_GPIO_PAR_QSPI); +} +#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ + + static struct platform_device *m532x_devices[] __initdata = { &m532x_uart, &m532x_fec, +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + &m532x_qspi, +#endif }; /***************************************************************************/ @@ -158,6 +279,9 @@ static int __init init_BSP(void) { m532x_uarts_init(); m532x_fec_init(); +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + m532x_qspi_init(); +#endif platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices)); return 0; } diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c index b91ee85d4b5d..8a6a10212fb5 100644 --- a/arch/m68knommu/platform/68328/ints.c +++ b/arch/m68knommu/platform/68328/ints.c @@ -178,11 +178,7 @@ void __init init_IRQ(void) /* turn off all interrupts */ IMR = ~0; - for (i = 0; (i < NR_IRQS); i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &intc_irq_chip; - } + for (i = 0; (i < NR_IRQS); i++) + set_irq_chip_and_handler(i, &intc_irq_chip, handle_level_irq); } diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c index 1143f77caca4..9b94c52daa55 100644 --- a/arch/m68knommu/platform/68360/ints.c +++ b/arch/m68knommu/platform/68360/ints.c @@ -132,11 +132,7 @@ void init_IRQ(void) /* turn off all CPM interrupts */ pquicc->intr_cimr = 0x00000000; - for (i = 0; (i < NR_IRQS); i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &intc_irq_chip; - } + for (i = 0; (i < NR_IRQS); i++) + set_irq_chip_and_handler(i, &intc_irq_chip, handle_level_irq); } diff --git a/arch/m68knommu/platform/coldfire/intc-2.c b/arch/m68knommu/platform/coldfire/intc-2.c index 5598c8b8661f..2863285927de 100644 --- a/arch/m68knommu/platform/coldfire/intc-2.c +++ b/arch/m68knommu/platform/coldfire/intc-2.c @@ -39,6 +39,15 @@ static void intc_irq_mask(unsigned int irq) val = __raw_readl(imraddr); __raw_writel(val | imrbit, imraddr); + + /* only on eport */ + if (irq >= MCFGPIO_IRQ_VECBASE || + irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) { + + u8 epier = __raw_readb(MCFEPORT_EPIER); + epier &= ~(1 << (irq - MCFGPIO_IRQ_VECBASE)); + __raw_writeb(epier, MCFEPORT_EPIER); + } } } @@ -64,13 +73,72 @@ static void intc_irq_unmask(unsigned int irq) val = __raw_readl(imraddr); __raw_writel(val & ~imrbit, imraddr); + + /* only on eport */ + if (irq >= MCFGPIO_IRQ_VECBASE || + irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) { + + u8 epier = __raw_readb(MCFEPORT_EPIER); + epier |= 1 << (irq - MCFGPIO_IRQ_VECBASE); + __raw_writeb(epier, MCFEPORT_EPIER); + } + } +} + +static void intc_irq_ack(unsigned int irq) +{ + /* only on eport */ + if (irq >= MCFGPIO_IRQ_VECBASE || + irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) { + u8 epfr = __raw_readb(MCFEPORT_EPFR); + epfr |= 1 << (irq - MCFGPIO_IRQ_VECBASE); + __raw_writeb(epfr, MCFEPORT_EPFR); } } +static int intc_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + unsigned shift; + u16 eppar; + + /* only on eport */ + if (irq < MCFGPIO_IRQ_VECBASE || + irq >= (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) + return -EINVAL; + + /* we only support TRIGGER_LOW or either (or both) RISING and FALLING */ + if ((flow_type & IRQF_TRIGGER_HIGH) || + ((flow_type & IRQF_TRIGGER_LOW) && + (flow_type & (IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING)))) + return -EINVAL; + + shift = (irq - MCFGPIO_IRQ_VECBASE) * 2; + + /* default to TRIGGER_LOW */ + eppar = 0; + if (flow_type & IRQF_TRIGGER_RISING) + eppar |= (0x01 << shift); + if (flow_type & IRQF_TRIGGER_FALLING) + eppar |= (0x02 << shift); + + if (eppar) + set_irq_handler(irq, handle_edge_irq); + else + set_irq_handler(irq, handle_level_irq); + + eppar |= (__raw_readw(MCFEPORT_EPPAR) & ~(0x3 << shift)); + __raw_writew(eppar, MCFEPORT_EPPAR); + + return 0; +} + static struct irq_chip intc_irq_chip = { .name = "CF-INTC", .mask = intc_irq_mask, .unmask = intc_irq_unmask, + .ack = intc_irq_ack, + .set_type = intc_irq_set_type, }; void __init init_IRQ(void) @@ -83,11 +151,7 @@ void __init init_IRQ(void) __raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL); __raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC1 + MCFINTC_IMRL); - for (irq = 0; (irq < NR_IRQS); irq++) { - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = NULL; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &intc_irq_chip; - } + for (irq = 0; (irq < NR_IRQS); irq++) + set_irq_chip_and_handler(irq, &intc_irq_chip, handle_level_irq); } diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c index 1b01e79c2f63..cc5473f6c2c7 100644 --- a/arch/m68knommu/platform/coldfire/intc-simr.c +++ b/arch/m68knommu/platform/coldfire/intc-simr.c @@ -26,6 +26,15 @@ static void intc_irq_mask(unsigned int irq) else if ((irq < MCFINT_VECBASE + 128) && MCFINTC1_SIMR) __raw_writeb(irq - MCFINT_VECBASE - 64, MCFINTC1_SIMR); } + + /* only on eport */ + if (irq >= MCFGPIO_IRQ_VECBASE || + irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) { + + u8 epier = __raw_readb(MCFEPORT_EPIER); + epier &= ~(1 << (irq - MCFGPIO_IRQ_VECBASE)); + __raw_writeb(epier, MCFEPORT_EPIER); + } } static void intc_irq_unmask(unsigned int irq) @@ -36,10 +45,63 @@ static void intc_irq_unmask(unsigned int irq) else if ((irq < MCFINT_VECBASE + 128) && MCFINTC1_CIMR) __raw_writeb(irq - MCFINT_VECBASE - 64, MCFINTC1_CIMR); } + + /* only on eport */ + if (irq >= MCFGPIO_IRQ_VECBASE || + irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) { + + u8 epier = __raw_readb(MCFEPORT_EPIER); + epier |= 1 << (irq - MCFGPIO_IRQ_VECBASE); + __raw_writeb(epier, MCFEPORT_EPIER); + } +} + +static void intc_irq_ack(unsigned int irq) +{ + /* only on eport */ + if (irq >= MCFGPIO_IRQ_VECBASE || + irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) { + u8 epfr = __raw_readb(MCFEPORT_EPFR); + epfr |= 1 << (irq - MCFGPIO_IRQ_VECBASE); + __raw_writeb(epfr, MCFEPORT_EPFR); + } } static int intc_irq_set_type(unsigned int irq, unsigned int type) { + unsigned shift; + u16 eppar; + + /* only on eport */ + if (irq < MCFGPIO_IRQ_VECBASE || + irq >= (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) + return -EINVAL; + + /* we only support TRIGGER_LOW or either (or both) RISING and FALLING */ + if ((type & IRQF_TRIGGER_HIGH) || + ((type & IRQF_TRIGGER_LOW) && + (type & (IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING)))) + return -EINVAL; + + shift = (irq - MCFGPIO_IRQ_VECBASE) * 2; + + /* default to TRIGGER_LOW */ + eppar = 0; + if (type & IRQF_TRIGGER_RISING) + eppar |= (0x01 << shift); + if (type & IRQF_TRIGGER_FALLING) + eppar |= (0x02 << shift); + + if (eppar) + set_irq_handler(irq, handle_edge_irq); + else + set_irq_handler(irq, handle_level_irq); + + eppar |= (__raw_readw(MCFEPORT_EPPAR) & ~(0x3 << shift)); + __raw_writew(eppar, MCFEPORT_EPPAR); + + if (irq >= MCFINT_VECBASE) { if (irq < MCFINT_VECBASE + 64) __raw_writeb(5, MCFINTC0_ICR0 + irq - MCFINT_VECBASE); @@ -53,6 +115,7 @@ static struct irq_chip intc_irq_chip = { .name = "CF-INTC", .mask = intc_irq_mask, .unmask = intc_irq_unmask, + .ack = intc_irq_ack, .set_type = intc_irq_set_type, }; @@ -68,10 +131,7 @@ void __init init_IRQ(void) __raw_writeb(0xff, MCFINTC1_SIMR); for (irq = 0; (irq < NR_IRQS); irq++) { - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = NULL; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &intc_irq_chip; + set_irq_chip_and_handler(irq, &intc_irq_chip, handle_level_irq); intc_irq_set_type(irq, 0); } } diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c index a4560c86db71..ad392a515cd2 100644 --- a/arch/m68knommu/platform/coldfire/intc.c +++ b/arch/m68knommu/platform/coldfire/intc.c @@ -115,16 +115,69 @@ static void intc_irq_mask(unsigned int irq) { if (mcf_irq2imr[irq]) mcf_setimr(mcf_irq2imr[irq]); + +#if defined MCFINTC2_GPIOIRQ0 + if (irq >= MCFINTC2_GPIOIRQ0 && irq <= MCFINTC2_GPIOIRQ7) { + u32 gpiointenable = __raw_readl(MCFSIM2_GPIOINTENABLE); + + gpiointenable &= ~(0x101 << (irq - MCFINTC2_GPIOIRQ0)); + __raw_writel(gpiointenable, MCFSIM2_GPIOINTENABLE); + } +#endif } static void intc_irq_unmask(unsigned int irq) { if (mcf_irq2imr[irq]) mcf_clrimr(mcf_irq2imr[irq]); + +#if defined MCFINTC2_GPIOIRQ0 + if (irq >= MCFINTC2_GPIOIRQ0 && irq <= MCFINTC2_GPIOIRQ7) { + struct irq_desc *desc = irq_to_desc(irq); + u32 gpiointenable = __raw_readl(MCFSIM2_GPIOINTENABLE); + + if (desc->status & IRQF_TRIGGER_RISING) + gpiointenable |= 0x0001 << (irq - MCFINTC2_GPIOIRQ0); + if (desc->status & IRQF_TRIGGER_FALLING) + gpiointenable |= 0x0100 << (irq - MCFINTC2_GPIOIRQ0); + __raw_writel(gpiointenable, MCFSIM2_GPIOINTENABLE); + } +#endif +} + +static void intc_irq_ack(unsigned int irq) +{ +#if defined MCFINTC2_GPIOIRQ0 + if (irq >= MCFINTC2_GPIOIRQ0 && irq <= MCFINTC2_GPIOIRQ7) { + u32 gpiointclear = __raw_readl(MCFSIM2_GPIOINTCLEAR); + + gpiointclear |= 0x0101 << (irq - MCFINTC2_GPIOIRQ0); + __raw_writel(gpiointclear, MCFSIM2_GPIOINTCLEAR); + } +#endif } static int intc_irq_set_type(unsigned int irq, unsigned int type) { +#if defined MCFINTC2_GPIOIRQ0 + u32 gpiointenable; + + if (type & ~(IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) + return -EINVAL; + + if ((irq < MCFINTC2_GPIOIRQ0) || (irq > MCFINTC2_GPIOIRQ7)) + return -EINVAL; + + /* enable rising or falling or both */ + gpiointenable = __raw_readl(MCFSIM2_GPIOINTENABLE); + gpiointenable &= ~(0x101 << (irq - MCFINTC2_GPIOIRQ0)); + if (type & IRQF_TRIGGER_RISING) + gpiointenable |= 0x0001 << (irq - MCFINTC2_GPIOIRQ0); + if (type & IRQF_TRIGGER_FALLING) + gpiointenable |= 0x0100 << (irq - MCFINTC2_GPIOIRQ0); + __raw_writel(gpiointenable, MCFSIM2_GPIOINTENABLE); +#endif + return 0; } @@ -132,6 +185,7 @@ static struct irq_chip intc_irq_chip = { .name = "CF-INTC", .mask = intc_irq_mask, .unmask = intc_irq_unmask, + .ack = intc_irq_ack, .set_type = intc_irq_set_type, }; @@ -143,10 +197,7 @@ void __init init_IRQ(void) mcf_maskimr(0xffffffff); for (irq = 0; (irq < NR_IRQS); irq++) { - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = NULL; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &intc_irq_chip; + set_irq_chip_and_handler(irq, &intc_irq_chip, handle_level_irq); intc_irq_set_type(irq, 0); } } diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 203ec61c6d4c..76818f926539 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -75,9 +75,6 @@ config LOCKDEP_SUPPORT config HAVE_LATENCYTOP_SUPPORT def_bool y -config PCI - def_bool n - config DTC def_bool y diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 836832dd9b26..72f6e8583746 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -84,7 +84,7 @@ define archhelp echo '* linux.bin - Create raw binary' echo ' linux.bin.gz - Create compressed raw binary' echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in' - echo ' - stripped elf with fdt blob + echo ' - stripped elf with fdt blob' echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob' echo ' *_defconfig - Select default config from arch/microblaze/configs' echo '' @@ -94,3 +94,5 @@ define archhelp echo ' name of a dts file from the arch/microblaze/boot/dts/ directory' echo ' (minus the .dts extension).' endef + +MRPROPER_FILES += $(boot)/simpleImage.* diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index 902cf9846c3c..57f50c2371c6 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -23,8 +23,6 @@ $(obj)/system.dtb: $(obj)/$(DTB).dtb endif $(obj)/linux.bin: vmlinux FORCE - [ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \ - touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image" $(call if_changed,objcopy) $(call if_changed,uimage) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' @@ -62,6 +60,4 @@ quiet_cmd_dtc = DTC $@ $(obj)/%.dtb: $(dtstree)/%.dts FORCE $(call if_changed,dtc) -clean-kernel += linux.bin linux.bin.gz simpleImage.* - -clean-files += *.dtb simpleImage.*.unstrip +clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 563c6b9453f0..8eeb09211ece 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -14,7 +14,6 @@ #include <asm/ptrace.h> #include <asm/setup.h> #include <asm/registers.h> -#include <asm/segment.h> #include <asm/entry.h> #include <asm/current.h> diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h deleted file mode 100644 index 0e7102c3fb11..000000000000 --- a/arch/microblaze/include/asm/segment.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2008-2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SEGMENT_H -#define _ASM_MICROBLAZE_SEGMENT_H - -# ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -/* - * On Microblaze the fs value is actually the top of the corresponding - * address space. - * - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - * - * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal. - */ -# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -# ifndef CONFIG_MMU -# define KERNEL_DS MAKE_MM_SEG(0) -# define USER_DS KERNEL_DS -# else -# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) -# endif - -# define get_ds() (KERNEL_DS) -# define get_fs() (current_thread_info()->addr_limit) -# define set_fs(val) (current_thread_info()->addr_limit = (val)) - -# define segment_eq(a, b) ((a).seg == (b).seg) - -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_MICROBLAZE_SEGMENT_H */ diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h index 6e92885d381a..b2ca80f64640 100644 --- a/arch/microblaze/include/asm/thread_info.h +++ b/arch/microblaze/include/asm/thread_info.h @@ -19,7 +19,6 @@ #ifndef __ASSEMBLY__ # include <linux/types.h> # include <asm/processor.h> -# include <asm/segment.h> /* * low level task data that entry.S needs immediate access to @@ -60,6 +59,10 @@ struct cpu_context { __u32 fsr; }; +typedef struct { + unsigned long seg; +} mm_segment_t; + struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h index bcb8b41d55af..2e1353c2d18d 100644 --- a/arch/microblaze/include/asm/tlbflush.h +++ b/arch/microblaze/include/asm/tlbflush.h @@ -24,6 +24,7 @@ extern void _tlbie(unsigned long address); extern void _tlbia(void); #define __tlbia() { preempt_disable(); _tlbia(); preempt_enable(); } +#define __tlbie(x) { _tlbie(x); } static inline void local_flush_tlb_all(void) { __tlbia(); } @@ -31,7 +32,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) { __tlbia(); } static inline void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) - { _tlbie(vmaddr); } + { __tlbie(vmaddr); } static inline void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { __tlbia(); } diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index 371bd6e56d9a..446bec29b142 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -22,101 +22,73 @@ #include <asm/mmu.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/segment.h> #include <linux/string.h> #define VERIFY_READ 0 #define VERIFY_WRITE 1 -#define __clear_user(addr, n) (memset((void *)(addr), 0, (n)), 0) - -#ifndef CONFIG_MMU - -extern int ___range_ok(unsigned long addr, unsigned long size); - -#define __range_ok(addr, size) \ - ___range_ok((unsigned long)(addr), (unsigned long)(size)) - -#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#define __access_ok(add, size) (__range_ok((addr), (size)) == 0) - -/* Undefined function to trigger linker error */ -extern int bad_user_access_length(void); - -/* FIXME this is function for optimalization -> memcpy */ -#define __get_user(var, ptr) \ -({ \ - int __gu_err = 0; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - (var) = *(ptr); \ - break; \ - case 8: \ - memcpy((void *) &(var), (ptr), 8); \ - break; \ - default: \ - (var) = 0; \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - __gu_err; \ -}) +/* + * On Microblaze the fs value is actually the top of the corresponding + * address space. + * + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + * + * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal. + */ +# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define __get_user_bad() (bad_user_access_length(), (-EFAULT)) +# ifndef CONFIG_MMU +# define KERNEL_DS MAKE_MM_SEG(0) +# define USER_DS KERNEL_DS +# else +# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) +# endif -/* FIXME is not there defined __pu_val */ -#define __put_user(var, ptr) \ -({ \ - int __pu_err = 0; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - *(ptr) = (var); \ - break; \ - case 8: { \ - typeof(*(ptr)) __pu_val = (var); \ - memcpy(ptr, &__pu_val, sizeof(__pu_val)); \ - } \ - break; \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) +# define get_ds() (KERNEL_DS) +# define get_fs() (current_thread_info()->addr_limit) +# define set_fs(val) (current_thread_info()->addr_limit = (val)) -#define __put_user_bad() (bad_user_access_length(), (-EFAULT)) +# define segment_eq(a, b) ((a).seg == (b).seg) -#define put_user(x, ptr) __put_user((x), (ptr)) -#define get_user(x, ptr) __get_user((x), (ptr)) +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; -#define copy_to_user(to, from, n) (memcpy((to), (from), (n)), 0) -#define copy_from_user(to, from, n) (memcpy((to), (from), (n)), 0) +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); -#define __copy_to_user(to, from, n) (copy_to_user((to), (from), (n))) -#define __copy_from_user(to, from, n) (copy_from_user((to), (from), (n))) -#define __copy_to_user_inatomic(to, from, n) \ - (__copy_to_user((to), (from), (n))) -#define __copy_from_user_inatomic(to, from, n) \ - (__copy_from_user((to), (from), (n))) +#ifndef CONFIG_MMU -static inline unsigned long clear_user(void *addr, unsigned long size) +/* Check against bounds of physical memory */ +static inline int ___range_ok(unsigned long addr, unsigned long size) { - if (access_ok(VERIFY_WRITE, addr, size)) - size = __clear_user(addr, size); - return size; + return ((addr < memory_start) || + ((addr + size) > memory_end)); } -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); +#define __range_ok(addr, size) \ + ___range_ok((unsigned long)(addr), (unsigned long)(size)) -extern long strncpy_from_user(char *dst, const char *src, long count); -extern long strnlen_user(const char *src, long count); +#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#else /* CONFIG_MMU */ +#else /* * Address is valid if: @@ -129,24 +101,88 @@ extern long strnlen_user(const char *src, long count); /* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n", type?"WRITE":"READ",addr,size,get_fs().seg)) */ -/* - * All the __XXX versions macros/functions below do not perform - * access checking. It is assumed that the necessary checks have been - * already performed before the finction (macro) is called. - */ +#endif -#define get_user(x, ptr) \ -({ \ - access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) \ - ? __get_user((x), (ptr)) : -EFAULT; \ -}) +#ifdef CONFIG_MMU +# define __FIXUP_SECTION ".section .fixup,\"ax\"\n" +# define __EX_TABLE_SECTION ".section __ex_table,\"a\"\n" +#else +# define __FIXUP_SECTION ".section .discard,\"ax\"\n" +# define __EX_TABLE_SECTION ".section .discard,\"a\"\n" +#endif -#define put_user(x, ptr) \ -({ \ - access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) \ - ? __put_user((x), (ptr)) : -EFAULT; \ +extern unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size); + +/* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. */ +static inline unsigned long __must_check __clear_user(void __user *to, + unsigned long n) +{ + /* normal memset with two words to __ex_table */ + __asm__ __volatile__ ( \ + "1: sb r0, %2, r0;" \ + " addik %0, %0, -1;" \ + " bneid %0, 1b;" \ + " addik %2, %2, 1;" \ + "2: " \ + __EX_TABLE_SECTION \ + ".word 1b,2b;" \ + ".previous;" \ + : "=r"(n) \ + : "0"(n), "r"(to) + ); + return n; +} + +static inline unsigned long __must_check clear_user(void __user *to, + unsigned long n) +{ + might_sleep(); + if (unlikely(!access_ok(VERIFY_WRITE, to, n))) + return n; + + return __clear_user(to, n); +} + +/* put_user and get_user macros */ +extern long __user_bad(void); + +#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ +({ \ + __asm__ __volatile__ ( \ + "1:" insn " %1, %2, r0;" \ + " addk %0, r0, r0;" \ + "2: " \ + __FIXUP_SECTION \ + "3: brid 2b;" \ + " addik %0, r0, %3;" \ + ".previous;" \ + __EX_TABLE_SECTION \ + ".word 1b,3b;" \ + ".previous;" \ + : "=&r"(__gu_err), "=r"(__gu_val) \ + : "r"(__gu_ptr), "i"(-EFAULT) \ + ); \ }) +/** + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ + #define __get_user(x, ptr) \ ({ \ unsigned long __gu_val; \ @@ -163,30 +199,74 @@ extern long strnlen_user(const char *src, long count); __get_user_asm("lw", (ptr), __gu_val, __gu_err); \ break; \ default: \ - __gu_val = 0; __gu_err = -EINVAL; \ + /* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\ } \ x = (__typeof__(*(ptr))) __gu_val; \ __gu_err; \ }) -#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ + +#define get_user(x, ptr) \ ({ \ - __asm__ __volatile__ ( \ - "1:" insn " %1, %2, r0; \ - addk %0, r0, r0; \ - 2: \ - .section .fixup,\"ax\"; \ - 3: brid 2b; \ - addik %0, r0, %3; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,3b; \ - .previous;" \ - : "=r"(__gu_err), "=r"(__gu_val) \ - : "r"(__gu_ptr), "i"(-EFAULT) \ - ); \ + access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) \ + ? __get_user((x), (ptr)) : -EFAULT; \ +}) + +#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ +({ \ + __asm__ __volatile__ ( \ + "1:" insn " %1, %2, r0;" \ + " addk %0, r0, r0;" \ + "2: " \ + __FIXUP_SECTION \ + "3: brid 2b;" \ + " addik %0, r0, %3;" \ + ".previous;" \ + __EX_TABLE_SECTION \ + ".word 1b,3b;" \ + ".previous;" \ + : "=&r"(__gu_err) \ + : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \ + ); \ }) +#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \ +({ \ + __asm__ __volatile__ (" lwi %0, %1, 0;" \ + "1: swi %0, %2, 0;" \ + " lwi %0, %1, 4;" \ + "2: swi %0, %2, 4;" \ + " addk %0, r0, r0;" \ + "3: " \ + __FIXUP_SECTION \ + "4: brid 3b;" \ + " addik %0, r0, %3;" \ + ".previous;" \ + __EX_TABLE_SECTION \ + ".word 1b,4b,2b,4b;" \ + ".previous;" \ + : "=&r"(__gu_err) \ + : "r"(&__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \ + ); \ +}) + +/** + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ + #define __put_user(x, ptr) \ ({ \ __typeof__(*(ptr)) volatile __gu_val = (x); \ @@ -195,7 +275,7 @@ extern long strnlen_user(const char *src, long count); case 1: \ __put_user_asm("sb", (ptr), __gu_val, __gu_err); \ break; \ - case 2: \ + case 2: \ __put_user_asm("sh", (ptr), __gu_val, __gu_err); \ break; \ case 4: \ @@ -205,121 +285,82 @@ extern long strnlen_user(const char *src, long count); __put_user_asm_8((ptr), __gu_val, __gu_err); \ break; \ default: \ - __gu_err = -EINVAL; \ + /*__gu_err = -EINVAL;*/ __gu_err = __user_bad(); \ } \ __gu_err; \ }) -#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \ -({ \ -__asm__ __volatile__ (" lwi %0, %1, 0; \ - 1: swi %0, %2, 0; \ - lwi %0, %1, 4; \ - 2: swi %0, %2, 4; \ - addk %0,r0,r0; \ - 3: \ - .section .fixup,\"ax\"; \ - 4: brid 3b; \ - addik %0, r0, %3; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,4b,2b,4b; \ - .previous;" \ - : "=&r"(__gu_err) \ - : "r"(&__gu_val), \ - "r"(__gu_ptr), "i"(-EFAULT) \ - ); \ -}) +#ifndef CONFIG_MMU -#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ -({ \ - __asm__ __volatile__ ( \ - "1:" insn " %1, %2, r0; \ - addk %0, r0, r0; \ - 2: \ - .section .fixup,\"ax\"; \ - 3: brid 2b; \ - addik %0, r0, %3; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,3b; \ - .previous;" \ - : "=r"(__gu_err) \ - : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \ - ); \ -}) +#define put_user(x, ptr) __put_user((x), (ptr)) -/* - * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. - */ -static inline int clear_user(char *to, int size) -{ - if (size && access_ok(VERIFY_WRITE, to, size)) { - __asm__ __volatile__ (" \ - 1: \ - sb r0, %2, r0; \ - addik %0, %0, -1; \ - bneid %0, 1b; \ - addik %2, %2, 1; \ - 2: \ - .section __ex_table,\"a\"; \ - .word 1b,2b; \ - .section .text;" \ - : "=r"(size) \ - : "0"(size), "r"(to) - ); - } - return size; -} +#else /* CONFIG_MMU */ -#define __copy_from_user(to, from, n) copy_from_user((to), (from), (n)) +#define put_user(x, ptr) \ +({ \ + access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) \ + ? __put_user((x), (ptr)) : -EFAULT; \ +}) +#endif /* CONFIG_MMU */ + +/* copy_to_from_user */ +#define __copy_from_user(to, from, n) \ + __copy_tofrom_user((__force void __user *)(to), \ + (void __user *)(from), (n)) #define __copy_from_user_inatomic(to, from, n) \ copy_from_user((to), (from), (n)) -#define copy_to_user(to, from, n) \ - (access_ok(VERIFY_WRITE, (to), (n)) ? \ - __copy_tofrom_user((void __user *)(to), \ - (__force const void __user *)(from), (n)) \ - : -EFAULT) +static inline long copy_from_user(void *to, + const void __user *from, unsigned long n) +{ + might_sleep(); + if (access_ok(VERIFY_READ, from, n)) + return __copy_from_user(to, from, n); + return n; +} -#define __copy_to_user(to, from, n) copy_to_user((to), (from), (n)) +#define __copy_to_user(to, from, n) \ + __copy_tofrom_user((void __user *)(to), \ + (__force const void __user *)(from), (n)) #define __copy_to_user_inatomic(to, from, n) copy_to_user((to), (from), (n)) -#define copy_from_user(to, from, n) \ - (access_ok(VERIFY_READ, (from), (n)) ? \ - __copy_tofrom_user((__force void __user *)(to), \ - (void __user *)(from), (n)) \ - : -EFAULT) +static inline long copy_to_user(void __user *to, + const void *from, unsigned long n) +{ + might_sleep(); + if (access_ok(VERIFY_WRITE, to, n)) + return __copy_to_user(to, from, n); + return n; +} +/* + * Copy a null terminated string from userspace. + */ extern int __strncpy_user(char *to, const char __user *from, int len); -extern int __strnlen_user(const char __user *sstr, int len); -#define strncpy_from_user(to, from, len) \ - (access_ok(VERIFY_READ, from, 1) ? \ - __strncpy_user(to, from, len) : -EFAULT) -#define strnlen_user(str, len) \ - (access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0) +#define __strncpy_from_user __strncpy_user -#endif /* CONFIG_MMU */ - -extern unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size); +static inline long +strncpy_from_user(char *dst, const char __user *src, long count) +{ + if (!access_ok(VERIFY_READ, src, 1)) + return -EFAULT; + return __strncpy_from_user(dst, src, count); +} /* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. + * Return the size of a string (including the ending 0) * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. + * Return 0 on exception, a value greater than N if too long */ -struct exception_table_entry { - unsigned long insn, fixup; -}; +extern int __strnlen_user(const char __user *sstr, int len); + +static inline long strnlen_user(const char __user *src, long n) +{ + if (!access_ok(VERIFY_READ, src, 1)) + return 0; + return __strnlen_user(src, n); +} #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c index b1084974fccd..4d5b0311601b 100644 --- a/arch/microblaze/kernel/dma.c +++ b/arch/microblaze/kernel/dma.c @@ -37,7 +37,7 @@ static inline void __dma_sync_page(unsigned long paddr, unsigned long offset, static unsigned long get_dma_direct_offset(struct device *dev) { - if (dev) + if (likely(dev)) return (unsigned long)dev->archdata.dma_data; return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */ diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index cb7815cfe5ab..da6a5f5dc766 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -51,6 +51,12 @@ swapper_pg_dir: .text ENTRY(_start) +#if CONFIG_KERNEL_BASE_ADDR == 0 + brai TOPHYS(real_start) + .org 0x100 +real_start: +#endif + mfs r1, rmsr andi r1, r1, ~2 mts rmsr, r1 @@ -99,8 +105,8 @@ no_fdt_arg: tophys(r4,r4) /* convert to phys address */ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */ _copy_command_line: - lbu r2, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */ - sb r2, r4, r6 /* addr[r4+r6]= r7*/ + lbu r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */ + sb r2, r4, r6 /* addr[r4+r6]= r2*/ addik r6, r6, 1 /* increment counting */ bgtid r3, _copy_command_line /* loop for all entries */ addik r3, r3, -1 /* descrement loop */ @@ -128,7 +134,7 @@ _copy_bram: * virtual to physical. */ nop - addik r3, r0, 63 /* Invalidate all TLB entries */ + addik r3, r0, MICROBLAZE_TLB_SIZE -1 /* Invalidate all TLB entries */ _invalidate: mts rtlbx, r3 mts rtlbhi, r0 /* flush: ensure V is clear */ diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 2b86c03aa841..995a2123635b 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -313,13 +313,13 @@ _hw_exception_handler: mfs r5, rmsr; nop swi r5, r1, 0; - mfs r3, resr + mfs r4, resr nop - mfs r4, rear; + mfs r3, rear; nop #ifndef CONFIG_MMU - andi r5, r3, 0x1000; /* Check ESR[DS] */ + andi r5, r4, 0x1000; /* Check ESR[DS] */ beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop @@ -327,13 +327,14 @@ not_in_delay_slot: swi r17, r1, PT_R17 #endif - andi r5, r3, 0x1F; /* Extract ESR[EXC] */ + andi r5, r4, 0x1F; /* Extract ESR[EXC] */ #ifdef CONFIG_MMU /* Calculate exception vector offset = r5 << 2 */ addk r6, r5, r5; /* << 1 */ addk r6, r6, r6; /* << 2 */ +#ifdef DEBUG /* counting which exception happen */ lwi r5, r0, 0x200 + TOPHYS(r0_ram) addi r5, r5, 1 @@ -341,6 +342,7 @@ not_in_delay_slot: lwi r5, r6, 0x200 + TOPHYS(r0_ram) addi r5, r5, 1 swi r5, r6, 0x200 + TOPHYS(r0_ram) +#endif /* end */ /* Load the HW Exception vector */ lwi r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable) @@ -376,7 +378,7 @@ handle_other_ex: /* Handle Other exceptions here */ swi r18, r1, PT_R18 or r5, r1, r0 - andi r6, r3, 0x1F; /* Load ESR[EC] */ + andi r6, r4, 0x1F; /* Load ESR[EC] */ lwi r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */ swi r7, r1, PT_MODE mfs r7, rfsr @@ -426,11 +428,11 @@ handle_other_ex: /* Handle Other exceptions here */ */ handle_unaligned_ex: /* Working registers already saved: R3, R4, R5, R6 - * R3 = ESR - * R4 = EAR + * R4 = ESR + * R3 = EAR */ #ifdef CONFIG_MMU - andi r6, r3, 0x1000 /* Check ESR[DS] */ + andi r6, r4, 0x1000 /* Check ESR[DS] */ beqi r6, _no_delayslot /* Branch if ESR[DS] not set */ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop @@ -439,7 +441,7 @@ _no_delayslot: RESTORE_STATE; bri unaligned_data_trap #endif - andi r6, r3, 0x3E0; /* Mask and extract the register operand */ + andi r6, r4, 0x3E0; /* Mask and extract the register operand */ srl r6, r6; /* r6 >> 5 */ srl r6, r6; srl r6, r6; @@ -448,33 +450,33 @@ _no_delayslot: /* Store the register operand in a temporary location */ sbi r6, r0, TOPHYS(ex_reg_op); - andi r6, r3, 0x400; /* Extract ESR[S] */ + andi r6, r4, 0x400; /* Extract ESR[S] */ bnei r6, ex_sw; ex_lw: - andi r6, r3, 0x800; /* Extract ESR[W] */ + andi r6, r4, 0x800; /* Extract ESR[W] */ beqi r6, ex_lhw; - lbui r5, r4, 0; /* Exception address in r4 */ + lbui r5, r3, 0; /* Exception address in r3 */ /* Load a word, byte-by-byte from destination address and save it in tmp space */ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r5, r4, 1; + lbui r5, r3, 1; sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); - lbui r5, r4, 2; + lbui r5, r3, 2; sbi r5, r0, TOPHYS(ex_tmp_data_loc_2); - lbui r5, r4, 3; + lbui r5, r3, 3; sbi r5, r0, TOPHYS(ex_tmp_data_loc_3); - /* Get the destination register value into r3 */ - lwi r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Get the destination register value into r4 */ + lwi r4, r0, TOPHYS(ex_tmp_data_loc_0); bri ex_lw_tail; ex_lhw: - lbui r5, r4, 0; /* Exception address in r4 */ + lbui r5, r3, 0; /* Exception address in r3 */ /* Load a half-word, byte-by-byte from destination address and save it in tmp space */ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r5, r4, 1; + lbui r5, r3, 1; sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); - /* Get the destination register value into r3 */ - lhui r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Get the destination register value into r4 */ + lhui r4, r0, TOPHYS(ex_tmp_data_loc_0); ex_lw_tail: /* Get the destination register number into r5 */ lbui r5, r0, TOPHYS(ex_reg_op); @@ -502,25 +504,25 @@ ex_sw_tail: andi r6, r6, 0x800; /* Extract ESR[W] */ beqi r6, ex_shw; /* Get the word - delay slot */ - swi r3, r0, TOPHYS(ex_tmp_data_loc_0); + swi r4, r0, TOPHYS(ex_tmp_data_loc_0); /* Store the word, byte-by-byte into destination address */ - lbui r3, r0, TOPHYS(ex_tmp_data_loc_0); - sbi r3, r4, 0; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_1); - sbi r3, r4, 1; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); - sbi r3, r4, 2; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); - sbi r3, r4, 3; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_0); + sbi r4, r3, 0; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_1); + sbi r4, r3, 1; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r4, r3, 2; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r4, r3, 3; bri ex_handler_done; ex_shw: /* Store the lower half-word, byte-by-byte into destination address */ - swi r3, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); - sbi r3, r4, 0; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); - sbi r3, r4, 1; + swi r4, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r4, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r4, r3, 0; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r4, r3, 1; ex_sw_end: /* Exception handling of store word, ends. */ ex_handler_done: @@ -560,21 +562,16 @@ ex_handler_done: */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - ori r4, r0, CONFIG_KERNEL_START - cmpu r4, r3, r4 - bgti r4, ex3 + ori r5, r0, CONFIG_KERNEL_START + cmpu r5, r3, r5 + bgti r5, ex3 /* First, check if it was a zone fault (which means a user * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - mfs r4, resr - nop andi r4, r4, 0x800 /* ESR_Z - zone protection */ bnei r4, ex2 @@ -589,8 +586,6 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - mfs r4, resr - nop andi r4, r4, 0x800 /* ESR_Z */ bnei r4, ex2 /* get current task address */ @@ -665,8 +660,6 @@ ex_handler_done: * R3 = ESR */ - mfs r3, rear /* Get faulting address */ - nop RESTORE_STATE; bri page_fault_instr_trap @@ -677,18 +670,15 @@ ex_handler_done: */ handle_data_tlb_miss_exception: /* Working registers already saved: R3, R4, R5, R6 - * R3 = ESR + * R3 = EAR, R4 = ESR */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - ori r4, r0, CONFIG_KERNEL_START - cmpu r4, r3, r4 + ori r6, r0, CONFIG_KERNEL_START + cmpu r4, r3, r6 bgti r4, ex5 ori r4, r0, swapper_pg_dir mts rpid, r0 /* TLB will have 0 TID */ @@ -731,9 +721,8 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ + brid finish_tlb_load andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ - - bri finish_tlb_load ex7: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -754,9 +743,6 @@ ex_handler_done: */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. @@ -792,7 +778,7 @@ ex_handler_done: lwi r4, r5, 0 /* Get Linux PTE */ andi r6, r4, _PAGE_PRESENT - beqi r6, ex7 + beqi r6, ex10 ori r4, r4, _PAGE_ACCESSED swi r4, r5, 0 @@ -805,9 +791,8 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ + brid finish_tlb_load andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ - - bri finish_tlb_load ex10: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -837,9 +822,9 @@ ex_handler_done: andi r5, r5, (MICROBLAZE_TLB_SIZE-1) ori r6, r0, 1 cmp r31, r5, r6 - blti r31, sem + blti r31, ex12 addik r5, r6, 1 - sem: + ex12: /* MS: save back current TLB index */ swi r5, r0, TOPHYS(tlb_index) @@ -859,7 +844,6 @@ ex_handler_done: nop /* Done...restore registers and get out of here. */ - ex12: mts rpid, r11 nop bri 4 diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S index df16c6287a8e..7cf86498326c 100644 --- a/arch/microblaze/kernel/misc.S +++ b/arch/microblaze/kernel/misc.S @@ -26,9 +26,10 @@ * We avoid flushing the pinned 0, 1 and possibly 2 entries. */ .globl _tlbia; +.type _tlbia, @function .align 4; _tlbia: - addik r12, r0, 63 /* flush all entries (63 - 3) */ + addik r12, r0, MICROBLAZE_TLB_SIZE - 1 /* flush all entries (63 - 3) */ /* isync */ _tlbia_1: mts rtlbx, r12 @@ -41,11 +42,13 @@ _tlbia_1: /* sync */ rtsd r15, 8 nop + .size _tlbia, . - _tlbia /* * Flush MMU TLB for a particular address (in r5) */ .globl _tlbie; +.type _tlbie, @function .align 4; _tlbie: mts rtlbsx, r5 /* look up the address in TLB */ @@ -59,17 +62,20 @@ _tlbie_1: rtsd r15, 8 nop + .size _tlbie, . - _tlbie + /* * Allocate TLB entry for early console */ .globl early_console_reg_tlb_alloc; +.type early_console_reg_tlb_alloc, @function .align 4; early_console_reg_tlb_alloc: /* * Load a TLB entry for the UART, so that microblaze_progress() can use * the UARTs nice and early. We use a 4k real==virtual mapping. */ - ori r4, r0, 63 + ori r4, r0, MICROBLAZE_TLB_SIZE - 1 mts rtlbx, r4 /* TLB slot 2 */ or r4,r5,r0 @@ -86,6 +92,8 @@ early_console_reg_tlb_alloc: rtsd r15, 8 nop + .size early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc + /* * Copy a whole page (4096 bytes). */ @@ -104,6 +112,7 @@ early_console_reg_tlb_alloc: #define DCACHE_LINE_BYTES (4 * 4) .globl copy_page; +.type copy_page, @function .align 4; copy_page: ori r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1 @@ -118,3 +127,5 @@ _copy_page_loop: addik r11, r11, -1 rtsd r15, 8 nop + + .size copy_page, . - copy_page diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 812f1bf06c9e..09bed44dfcd3 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <asm/system.h> #include <asm/pgalloc.h> +#include <asm/uaccess.h> /* for USER_DS macros */ #include <asm/cacheflush.h> void show_regs(struct pt_regs *regs) @@ -74,7 +75,10 @@ __setup("hlt", hlt_setup); void default_idle(void) { - if (!hlt_counter) { + if (likely(hlt_counter)) { + while (!need_resched()) + cpu_relax(); + } else { clear_thread_flag(TIF_POLLING_NRFLAG); smp_mb__after_clear_bit(); local_irq_disable(); @@ -82,9 +86,7 @@ void default_idle(void) cpu_sleep(); local_irq_enable(); set_thread_flag(TIF_POLLING_NRFLAG); - } else - while (!need_resched()) - cpu_relax(); + } } void cpu_idle(void) diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index f974ec7aa357..17c98dbcec88 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -92,6 +92,12 @@ inline unsigned get_romfs_len(unsigned *addr) } #endif /* CONFIG_MTD_UCLINUX_EBSS */ +#if defined(CONFIG_EARLY_PRINTK) && defined(CONFIG_SERIAL_UARTLITE_CONSOLE) +#define eprintk early_printk +#else +#define eprintk printk +#endif + void __init machine_early_init(const char *cmdline, unsigned int ram, unsigned int fdt, unsigned int msr) { @@ -139,32 +145,32 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, setup_early_printk(NULL); #endif - early_printk("Ramdisk addr 0x%08x, ", ram); + eprintk("Ramdisk addr 0x%08x, ", ram); if (fdt) - early_printk("FDT at 0x%08x\n", fdt); + eprintk("FDT at 0x%08x\n", fdt); else - early_printk("Compiled-in FDT at 0x%08x\n", + eprintk("Compiled-in FDT at 0x%08x\n", (unsigned int)_fdt_start); #ifdef CONFIG_MTD_UCLINUX - early_printk("Found romfs @ 0x%08x (0x%08x)\n", + eprintk("Found romfs @ 0x%08x (0x%08x)\n", romfs_base, romfs_size); - early_printk("#### klimit %p ####\n", old_klimit); + eprintk("#### klimit %p ####\n", old_klimit); BUG_ON(romfs_size < 0); /* What else can we do? */ - early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", + eprintk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", romfs_size, romfs_base, (unsigned)&_ebss); - early_printk("New klimit: 0x%08x\n", (unsigned)klimit); + eprintk("New klimit: 0x%08x\n", (unsigned)klimit); #endif #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR if (msr) - early_printk("!!!Your kernel has setup MSR instruction but " + eprintk("!!!Your kernel has setup MSR instruction but " "CPU don't have it %d\n", msr); #else if (!msr) - early_printk("!!!Your kernel not setup MSR instruction but " + eprintk("!!!Your kernel not setup MSR instruction but " "CPU have it %d\n", msr); #endif diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index eaaaf805f31b..5e4570ef515c 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -22,13 +22,11 @@ void trap_init(void) __enable_hw_exceptions(); } -static int kstack_depth_to_print = 24; +static unsigned long kstack_depth_to_print = 24; static int __init kstack_setup(char *s) { - kstack_depth_to_print = strict_strtoul(s, 0, NULL); - - return 1; + return !strict_strtoul(s, 0, &kstack_depth_to_print); } __setup("kstack=", kstack_setup); diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index b579db068c06..4dfe47d3cd91 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -10,5 +10,4 @@ else lib-y += memcpy.o memmove.o endif -lib-$(CONFIG_NO_MMU) += uaccess.o -lib-$(CONFIG_MMU) += uaccess_old.o +lib-y += uaccess_old.o diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S index 02e3ab4eddf3..fdc48bb065d8 100644 --- a/arch/microblaze/lib/fastcopy.S +++ b/arch/microblaze/lib/fastcopy.S @@ -30,8 +30,9 @@ */ #include <linux/linkage.h> - + .text .globl memcpy + .type memcpy, @function .ent memcpy memcpy: @@ -345,9 +346,11 @@ a_done: rtsd r15, 8 nop +.size memcpy, . - memcpy .end memcpy /*----------------------------------------------------------------------------*/ .globl memmove + .type memmove, @function .ent memmove memmove: @@ -659,4 +662,5 @@ d_done: rtsd r15, 8 nop +.size memmove, . - memmove .end memmove diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index cc2108b6b260..014bac92bdff 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -53,7 +53,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) const uint32_t *i_src; uint32_t *i_dst; - if (c >= 4) { + if (likely(c >= 4)) { unsigned value, buf_hold; /* Align the dstination to a word boundry. */ diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index 4df851d41a29..ecfb663e1fc1 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -33,22 +33,23 @@ #ifdef __HAVE_ARCH_MEMSET void *memset(void *v_src, int c, __kernel_size_t n) { - char *src = v_src; #ifdef CONFIG_OPT_LIB_FUNCTION uint32_t *i_src; - uint32_t w32; + uint32_t w32 = 0; #endif /* Truncate c to 8 bits */ c = (c & 0xFF); #ifdef CONFIG_OPT_LIB_FUNCTION - /* Make a repeating word out of it */ - w32 = c; - w32 |= w32 << 8; - w32 |= w32 << 16; + if (unlikely(c)) { + /* Make a repeating word out of it */ + w32 = c; + w32 |= w32 << 8; + w32 |= w32 << 16; + } - if (n >= 4) { + if (likely(n >= 4)) { /* Align the destination to a word boundary */ /* This is done in an endian independant manner */ switch ((unsigned) src & 3) { diff --git a/arch/microblaze/lib/uaccess.c b/arch/microblaze/lib/uaccess.c deleted file mode 100644 index a853fe089c44..000000000000 --- a/arch/microblaze/lib/uaccess.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/string.h> -#include <asm/uaccess.h> - -#include <asm/bug.h> - -long strnlen_user(const char __user *src, long count) -{ - return strlen(src) + 1; -} - -#define __do_strncpy_from_user(dst, src, count, res) \ - do { \ - char *tmp; \ - strncpy(dst, src, count); \ - for (tmp = dst; *tmp && count > 0; tmp++, count--) \ - ; \ - res = (tmp - dst); \ - } while (0) - -long __strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res; - __do_strncpy_from_user(dst, src, count, res); - return res; -} - -long strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - __do_strncpy_from_user(dst, src, count, res); - return res; -} - -unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size) -{ - memcpy(to, from, size); - return 0; -} diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S index 67f991c14b8a..5810cec54a7a 100644 --- a/arch/microblaze/lib/uaccess_old.S +++ b/arch/microblaze/lib/uaccess_old.S @@ -22,6 +22,7 @@ .text .globl __strncpy_user; +.type __strncpy_user, @function .align 4; __strncpy_user: @@ -50,7 +51,7 @@ __strncpy_user: 3: rtsd r15,8 nop - + .size __strncpy_user, . - __strncpy_user .section .fixup, "ax" .align 2 @@ -72,6 +73,7 @@ __strncpy_user: .text .globl __strnlen_user; +.type __strnlen_user, @function .align 4; __strnlen_user: addik r3,r6,0 @@ -90,7 +92,7 @@ __strnlen_user: 3: rtsd r15,8 nop - + .size __strnlen_user, . - __strnlen_user .section .fixup,"ax" 4: @@ -108,6 +110,7 @@ __strnlen_user: */ .text .globl __copy_tofrom_user; +.type __copy_tofrom_user, @function .align 4; __copy_tofrom_user: /* @@ -116,20 +119,34 @@ __copy_tofrom_user: * r7, r3 - count * r4 - tempval */ - addik r3,r7,0 - beqi r3,3f -1: - lbu r4,r6,r0 - addik r6,r6,1 -2: - sb r4,r5,r0 - addik r3,r3,-1 - bneid r3,1b - addik r5,r5,1 /* delay slot */ + beqid r7, 3f /* zero size is not likely */ + andi r3, r7, 0x3 /* filter add count */ + bneid r3, 4f /* if is odd value then byte copying */ + or r3, r5, r6 /* find if is any to/from unaligned */ + andi r3, r3, 0x3 /* mask unaligned */ + bneid r3, 1f /* it is unaligned -> then jump */ + or r3, r0, r0 + +/* at least one 4 byte copy */ +5: lw r4, r6, r3 +6: sw r4, r5, r3 + addik r7, r7, -4 + bneid r7, 5b + addik r3, r3, 4 + addik r3, r7, 0 + rtsd r15, 8 + nop +4: or r3, r0, r0 +1: lbu r4,r6,r3 +2: sb r4,r5,r3 + addik r7,r7,-1 + bneid r7,1b + addik r3,r3,1 /* delay slot */ 3: + addik r3,r7,0 rtsd r15,8 nop - + .size __copy_tofrom_user, . - __copy_tofrom_user .section __ex_table,"a" - .word 1b,3b,2b,3b + .word 1b,3b,2b,3b,5b,3b,6b,3b diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index d9d249a66ff2..7af87f4b2c2c 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -106,7 +106,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, regs->esr = error_code; /* On a kernel SLB miss we can only check for a valid exception entry */ - if (kernel_mode(regs) && (address >= TASK_SIZE)) { + if (unlikely(kernel_mode(regs) && (address >= TASK_SIZE))) { printk(KERN_WARNING "kernel task_size exceed"); _exception(SIGSEGV, regs, code, address); } @@ -122,7 +122,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, } #endif /* CONFIG_KGDB */ - if (in_atomic() || !mm) { + if (unlikely(in_atomic() || !mm)) { if (kernel_mode(regs)) goto bad_area_nosemaphore; @@ -150,7 +150,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, * source. If this is invalid we can skip the address space check, * thus avoiding the deadlock. */ - if (!down_read_trylock(&mm->mmap_sem)) { + if (unlikely(!down_read_trylock(&mm->mmap_sem))) { if (kernel_mode(regs) && !search_exception_tables(regs->pc)) goto bad_area_nosemaphore; @@ -158,16 +158,16 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, } vma = find_vma(mm, address); - if (!vma) + if (unlikely(!vma)) goto bad_area; if (vma->vm_start <= address) goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) + if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) goto bad_area; - if (!is_write) + if (unlikely(!is_write)) goto bad_area; /* @@ -179,7 +179,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, * before setting the user r1. Thus we allow the stack to * expand to 1MB without further checks. */ - if (address + 0x100000 < vma->vm_end) { + if (unlikely(address + 0x100000 < vma->vm_end)) { /* get user regs even if this fault is in kernel mode */ struct pt_regs *uregs = current->thread.regs; @@ -209,15 +209,15 @@ good_area: code = SEGV_ACCERR; /* a write */ - if (is_write) { - if (!(vma->vm_flags & VM_WRITE)) + if (unlikely(is_write)) { + if (unlikely(!(vma->vm_flags & VM_WRITE))) goto bad_area; /* a read */ } else { /* protection fault */ - if (error_code & 0x08000000) + if (unlikely(error_code & 0x08000000)) goto bad_area; - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC)))) goto bad_area; } @@ -235,7 +235,7 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + if (unlikely(fault & VM_FAULT_MAJOR)) current->maj_flt++; else current->min_flt++; diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 1608e2e1a44a..40bc10ede097 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -165,7 +165,6 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) for (addr = begin; addr < end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); - memset((void *)addr, 0xcc, PAGE_SIZE); free_page(addr); totalram_pages++; } @@ -208,14 +207,6 @@ void __init mem_init(void) } #ifndef CONFIG_MMU -/* Check against bounds of physical memory */ -int ___range_ok(unsigned long addr, unsigned long size) -{ - return ((addr < memory_start) || - ((addr + size) > memory_end)); -} -EXPORT_SYMBOL(___range_ok); - int page_is_ram(unsigned long pfn) { return __range_ok(pfn, 0); diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index 63a6fd07c48f..d31312cde6ea 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -154,7 +154,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) err = 0; set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); - if (mem_init_done) + if (unlikely(mem_init_done)) flush_HPTE(0, va, pmd_val(*pd)); /* flush_HPTE(0, va, pg); */ } diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h index c1b475a941eb..a9b91ed3d4b9 100644 --- a/arch/powerpc/include/asm/asm-compat.h +++ b/arch/powerpc/include/asm/asm-compat.h @@ -28,6 +28,7 @@ #define PPC_LLARX(t, a, b, eh) PPC_LDARX(t, a, b, eh) #define PPC_STLCX stringify_in_c(stdcx.) #define PPC_CNTLZL stringify_in_c(cntlzd) +#define PPC_LR_STKOFF 16 /* Move to CR, single-entry optimized version. Only available * on POWER4 and later. @@ -51,6 +52,7 @@ #define PPC_STLCX stringify_in_c(stwcx.) #define PPC_CNTLZL stringify_in_c(cntlzw) #define PPC_MTOCRF stringify_in_c(mtcrf) +#define PPC_LR_STKOFF 4 #endif diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S index 2d29752cbe16..b485a87c94e1 100644 --- a/arch/powerpc/kernel/misc.S +++ b/arch/powerpc/kernel/misc.S @@ -127,3 +127,31 @@ _GLOBAL(__setup_cpu_power7) _GLOBAL(__restore_cpu_power7) /* place holder */ blr + +#ifdef CONFIG_EVENT_TRACING +/* + * Get a minimal set of registers for our caller's nth caller. + * r3 = regs pointer, r5 = n. + * + * We only get R1 (stack pointer), NIP (next instruction pointer) + * and LR (link register). These are all we can get in the + * general case without doing complicated stack unwinding, but + * fortunately they are enough to do a stack backtrace, which + * is all we need them for. + */ +_GLOBAL(perf_arch_fetch_caller_regs) + mr r6,r1 + cmpwi r5,0 + mflr r4 + ble 2f + mtctr r5 +1: PPC_LL r6,0(r6) + bdnz 1b + PPC_LL r4,PPC_LR_STKOFF(r6) +2: PPC_LL r7,0(r6) + PPC_LL r7,PPC_LR_STKOFF(r7) + PPC_STL r6,GPR1-STACK_FRAME_OVERHEAD(r3) + PPC_STL r4,_NIP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r7,_LINK-STACK_FRAME_OVERHEAD(r3) + blr +#endif /* CONFIG_EVENT_TRACING */ diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index 929d017535a3..d4f8be307cd5 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -481,6 +481,8 @@ mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match) if (rc) goto err_bcom_rx_irq; + lpbfifo.dma_irqs_enabled = 1; + /* Request the Bestcomm transmit (memory --> fifo) task and IRQ */ lpbfifo.bcom_tx_task = bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA, diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index 05527c040b7a..f7e78c79b8b1 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -126,16 +126,15 @@ struct _lowcore { __u32 user_exec_asce; /* 0x02ac */ /* SMP info area */ - struct cpuid cpu_id; /* 0x02b0 */ - __u32 cpu_nr; /* 0x02b8 */ - __u32 softirq_pending; /* 0x02bc */ - __u32 percpu_offset; /* 0x02c0 */ - __u32 ext_call_fast; /* 0x02c4 */ - __u64 int_clock; /* 0x02c8 */ - __u64 clock_comparator; /* 0x02d0 */ - __u32 machine_flags; /* 0x02d8 */ - __u32 ftrace_func; /* 0x02dc */ - __u8 pad_0x02e0[0x0300-0x02e0]; /* 0x02e0 */ + __u32 cpu_nr; /* 0x02b0 */ + __u32 softirq_pending; /* 0x02b4 */ + __u32 percpu_offset; /* 0x02b8 */ + __u32 ext_call_fast; /* 0x02bc */ + __u64 int_clock; /* 0x02c0 */ + __u64 clock_comparator; /* 0x02c8 */ + __u32 machine_flags; /* 0x02d0 */ + __u32 ftrace_func; /* 0x02d4 */ + __u8 pad_0x02d8[0x0300-0x02d8]; /* 0x02d8 */ /* Interrupt response block */ __u8 irb[64]; /* 0x0300 */ @@ -189,14 +188,14 @@ struct _lowcore { __u32 data_exc_code; /* 0x0090 */ __u16 mon_class_num; /* 0x0094 */ __u16 per_perc_atmid; /* 0x0096 */ - addr_t per_address; /* 0x0098 */ + __u64 per_address; /* 0x0098 */ __u8 exc_access_id; /* 0x00a0 */ __u8 per_access_id; /* 0x00a1 */ __u8 op_access_id; /* 0x00a2 */ __u8 ar_access_id; /* 0x00a3 */ __u8 pad_0x00a4[0x00a8-0x00a4]; /* 0x00a4 */ - addr_t trans_exc_code; /* 0x00a8 */ - addr_t monitor_code; /* 0x00b0 */ + __u64 trans_exc_code; /* 0x00a8 */ + __u64 monitor_code; /* 0x00b0 */ __u16 subchannel_id; /* 0x00b8 */ __u16 subchannel_nr; /* 0x00ba */ __u32 io_int_parm; /* 0x00bc */ @@ -207,7 +206,7 @@ struct _lowcore { __u32 mcck_interruption_code[2]; /* 0x00e8 */ __u8 pad_0x00f0[0x00f4-0x00f0]; /* 0x00f0 */ __u32 external_damage_code; /* 0x00f4 */ - addr_t failing_storage_address; /* 0x00f8 */ + __u64 failing_storage_address; /* 0x00f8 */ __u8 pad_0x0100[0x0110-0x0100]; /* 0x0100 */ __u64 breaking_event_addr; /* 0x0110 */ __u8 pad_0x0118[0x0120-0x0118]; /* 0x0118 */ @@ -255,17 +254,16 @@ struct _lowcore { __u64 user_exec_asce; /* 0x0318 */ /* SMP info area */ - struct cpuid cpu_id; /* 0x0320 */ - __u32 cpu_nr; /* 0x0328 */ - __u32 softirq_pending; /* 0x032c */ - __u64 percpu_offset; /* 0x0330 */ - __u64 ext_call_fast; /* 0x0338 */ - __u64 int_clock; /* 0x0340 */ - __u64 clock_comparator; /* 0x0348 */ - __u64 vdso_per_cpu_data; /* 0x0350 */ - __u64 machine_flags; /* 0x0358 */ - __u64 ftrace_func; /* 0x0360 */ - __u8 pad_0x0368[0x0380-0x0368]; /* 0x0368 */ + __u32 cpu_nr; /* 0x0320 */ + __u32 softirq_pending; /* 0x0324 */ + __u64 percpu_offset; /* 0x0328 */ + __u64 ext_call_fast; /* 0x0330 */ + __u64 int_clock; /* 0x0338 */ + __u64 clock_comparator; /* 0x0340 */ + __u64 vdso_per_cpu_data; /* 0x0348 */ + __u64 machine_flags; /* 0x0350 */ + __u64 ftrace_func; /* 0x0358 */ + __u8 pad_0x0368[0x0380-0x0360]; /* 0x0360 */ /* Interrupt response block. */ __u8 irb[64]; /* 0x0380 */ diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 08db736dded0..949b5a297680 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -125,7 +125,6 @@ int main(void) DEFINE(__LC_KERNEL_ASCE, offsetof(struct _lowcore, kernel_asce)); DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce)); DEFINE(__LC_USER_EXEC_ASCE, offsetof(struct _lowcore, user_exec_asce)); - DEFINE(__LC_CPUID, offsetof(struct _lowcore, cpu_id)); DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock)); DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags)); DEFINE(__LC_FTRACE_FUNC, offsetof(struct _lowcore, ftrace_func)); diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 9d1f76702d47..51838ad42d56 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -328,8 +328,8 @@ iplstart: # # reset files in VM reader # - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running VM ? + stidp __LC_SAVE_AREA # store cpuid + tm __LC_SAVE_AREA,0xff # running VM ? bno .Lnoreset la %r2,.Lreset lhi %r3,26 diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c index 0729f36c2fe3..ecb2d02b02e4 100644 --- a/arch/s390/kernel/processor.c +++ b/arch/s390/kernel/processor.c @@ -18,24 +18,42 @@ #include <asm/lowcore.h> #include <asm/param.h> +static DEFINE_PER_CPU(struct cpuid, cpu_id); + +/* + * cpu_init - initializes state that is per-CPU. + */ +void __cpuinit cpu_init(void) +{ + struct cpuid *id = &per_cpu(cpu_id, smp_processor_id()); + + get_cpu_id(id); + atomic_inc(&init_mm.mm_count); + current->active_mm = &init_mm; + BUG_ON(current->mm); + enter_lazy_tlb(&init_mm, current); +} + +/* + * print_cpu_info - print basic information about a cpu + */ void __cpuinit print_cpu_info(void) { + struct cpuid *id = &per_cpu(cpu_id, smp_processor_id()); + pr_info("Processor %d started, address %d, identification %06X\n", - S390_lowcore.cpu_nr, S390_lowcore.cpu_addr, - S390_lowcore.cpu_id.ident); + S390_lowcore.cpu_nr, S390_lowcore.cpu_addr, id->ident); } /* * show_cpuinfo - Get information on one CPU for use by procfs. */ - static int show_cpuinfo(struct seq_file *m, void *v) { static const char *hwcap_str[10] = { "esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp", "edat", "etf3eh", "highgprs" }; - struct _lowcore *lc; unsigned long n = (unsigned long) v - 1; int i; @@ -55,19 +73,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) } if (cpu_online(n)) { -#ifdef CONFIG_SMP - lc = (smp_processor_id() == n) ? - &S390_lowcore : lowcore_ptr[n]; -#else - lc = &S390_lowcore; -#endif + struct cpuid *id = &per_cpu(cpu_id, n); seq_printf(m, "processor %li: " "version = %02X, " "identification = %06X, " "machine = %04X\n", - n, lc->cpu_id.version, - lc->cpu_id.ident, - lc->cpu_id.machine); + n, id->version, id->ident, id->machine); } preempt_enable(); return 0; diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index ba363d99de43..cdeb83b73aaf 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -114,22 +114,6 @@ static struct resource data_resource = { }; /* - * cpu_init() initializes state that is per-CPU. - */ -void __cpuinit cpu_init(void) -{ - /* - * Store processor id in lowcore (used e.g. in timer_interrupt) - */ - get_cpu_id(&S390_lowcore.cpu_id); - - atomic_inc(&init_mm.mm_count); - current->active_mm = &init_mm; - BUG_ON(current->mm); - enter_lazy_tlb(&init_mm, current); -} - -/* * condev= and conmode= setup parameter. */ @@ -696,6 +680,7 @@ static void __init setup_hwcaps(void) static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 }; unsigned long long facility_list_extended; unsigned int facility_list; + struct cpuid cpu_id; int i; facility_list = stfl(); @@ -757,7 +742,8 @@ static void __init setup_hwcaps(void) */ elf_hwcap |= HWCAP_S390_HIGH_GPRS; - switch (S390_lowcore.cpu_id.machine) { + get_cpu_id(&cpu_id); + switch (cpu_id.machine) { case 0x9672: #if !defined(CONFIG_64BIT) default: /* Use "g5" as default for 31 bit kernels. */ diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h index 39327d6a57eb..a232e9e1f4e5 100644 --- a/arch/sparc/include/asm/stat.h +++ b/arch/sparc/include/asm/stat.h @@ -53,8 +53,8 @@ struct stat { ino_t st_ino; mode_t st_mode; short st_nlink; - uid16_t st_uid; - gid16_t st_gid; + unsigned short st_uid; + unsigned short st_gid; unsigned short st_rdev; off_t st_size; time_t st_atime; diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 68cb9b42088f..e2771939341d 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1337,7 +1337,7 @@ static void perf_callchain_user_32(struct pt_regs *regs, callchain_store(entry, PERF_CONTEXT_USER); callchain_store(entry, regs->tpc); - ufp = regs->u_regs[UREG_I6]; + ufp = regs->u_regs[UREG_I6] & 0xffffffffUL; do { struct sparc_stackf32 *usf, sf; unsigned long pc; diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c index ca39c606fe8e..1eb8b00aed75 100644 --- a/arch/sparc/kernel/sysfs.c +++ b/arch/sparc/kernel/sysfs.c @@ -107,12 +107,12 @@ static unsigned long run_on_cpu(unsigned long cpu, unsigned long ret; /* should return -EINVAL to userspace */ - if (set_cpus_allowed(current, cpumask_of_cpu(cpu))) + if (set_cpus_allowed_ptr(current, cpumask_of(cpu))) return 0; ret = func(arg); - set_cpus_allowed(current, old_affinity); + set_cpus_allowed_ptr(current, &old_affinity); return ret; } diff --git a/arch/sparc/kernel/us2e_cpufreq.c b/arch/sparc/kernel/us2e_cpufreq.c index 791c15138f3a..8f982b76c712 100644 --- a/arch/sparc/kernel/us2e_cpufreq.c +++ b/arch/sparc/kernel/us2e_cpufreq.c @@ -238,12 +238,12 @@ static unsigned int us2e_freq_get(unsigned int cpu) return 0; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); clock_tick = sparc64_get_clock_tick(cpu) / 1000; estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); return clock_tick / estar_to_divisor(estar); } @@ -259,7 +259,7 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index) return; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000; new_bits = index_to_estar_mode(index); @@ -281,7 +281,7 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); } static int us2e_freq_target(struct cpufreq_policy *policy, diff --git a/arch/sparc/kernel/us3_cpufreq.c b/arch/sparc/kernel/us3_cpufreq.c index 365b6464e2ce..f35d1e794548 100644 --- a/arch/sparc/kernel/us3_cpufreq.c +++ b/arch/sparc/kernel/us3_cpufreq.c @@ -86,12 +86,12 @@ static unsigned int us3_freq_get(unsigned int cpu) return 0; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); reg = read_safari_cfg(); ret = get_current_freq(cpu, reg); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); return ret; } @@ -106,7 +106,7 @@ static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index) return; cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); + set_cpus_allowed_ptr(current, cpumask_of(cpu)); new_freq = sparc64_get_clock_tick(cpu) / 1000; switch (index) { @@ -140,7 +140,7 @@ static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - set_cpus_allowed(current, cpus_allowed); + set_cpus_allowed_ptr(current, &cpus_allowed); } static int us3_freq_target(struct cpufreq_policy *policy, diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 635f03bb4995..d07b44f7d1dc 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -82,6 +82,9 @@ enum fixed_addresses { #endif FIX_DBGP_BASE, FIX_EARLYCON_MEM_BASE, +#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT + FIX_OHCI1394_BASE, +#endif #ifdef CONFIG_X86_LOCAL_APIC FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */ #endif @@ -132,9 +135,6 @@ enum fixed_addresses { (__end_of_permanent_fixed_addresses & (TOTAL_FIX_BTMAPS - 1)) : __end_of_permanent_fixed_addresses, FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1, -#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT - FIX_OHCI1394_BASE, -#endif #ifdef CONFIG_X86_32 FIX_WP_TEST, #endif diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index a929c9ede33d..46c0fe05f230 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -133,6 +133,7 @@ extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void); typedef int vector_irq_t[NR_VECTORS]; DECLARE_PER_CPU(vector_irq_t, vector_irq); +extern void setup_vector_irq(int cpu); #ifdef CONFIG_X86_IO_APIC extern void lock_vector_lock(void); diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 1cd58cdbc03f..4604e6a54d36 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -105,6 +105,8 @@ #define MSR_AMD64_PATCH_LEVEL 0x0000008b #define MSR_AMD64_NB_CFG 0xc001001f #define MSR_AMD64_PATCH_LOADER 0xc0010020 +#define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140 +#define MSR_AMD64_OSVW_STATUS 0xc0010141 #define MSR_AMD64_IBSFETCHCTL 0xc0011030 #define MSR_AMD64_IBSFETCHLINAD 0xc0011031 #define MSR_AMD64_IBSFETCHPHYSAD 0xc0011032 diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index e4e0ddcb1546..463de9a858ad 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1268,6 +1268,14 @@ void __setup_vector_irq(int cpu) /* Mark the inuse vectors */ for_each_irq_desc(irq, desc) { cfg = desc->chip_data; + + /* + * If it is a legacy IRQ handled by the legacy PIC, this cpu + * will be part of the irq_cfg's domain. + */ + if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq)) + cpumask_set_cpu(cpu, cfg->domain); + if (!cpumask_test_cpu(cpu, cfg->domain)) continue; vector = cfg->vector; diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index ef257fc2921b..f01d390f9c5b 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -141,6 +141,28 @@ void __init init_IRQ(void) x86_init.irqs.intr_init(); } +/* + * Setup the vector to irq mappings. + */ +void setup_vector_irq(int cpu) +{ +#ifndef CONFIG_X86_IO_APIC + int irq; + + /* + * On most of the platforms, legacy PIC delivers the interrupts on the + * boot cpu. But there are certain platforms where PIC interrupts are + * delivered to multiple cpu's. If the legacy IRQ is handled by the + * legacy PIC, for the new cpu that is coming online, setup the static + * legacy vector to irq mapping: + */ + for (irq = 0; irq < legacy_pic->nr_legacy_irqs; irq++) + per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq; +#endif + + __setup_vector_irq(cpu); +} + static void __init smp_intr_init(void) { #ifdef CONFIG_SMP diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ad9540676fcc..28ad9f4d8b94 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -526,21 +526,37 @@ static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) } /* - * Check for AMD CPUs, which have potentially C1E support + * Check for AMD CPUs, where APIC timer interrupt does not wake up CPU from C1e. + * For more information see + * - Erratum #400 for NPT family 0xf and family 0x10 CPUs + * - Erratum #365 for family 0x11 (not affected because C1e not in use) */ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) { + u64 val; if (c->x86_vendor != X86_VENDOR_AMD) - return 0; - - if (c->x86 < 0x0F) - return 0; + goto no_c1e_idle; /* Family 0x0f models < rev F do not have C1E */ - if (c->x86 == 0x0f && c->x86_model < 0x40) - return 0; + if (c->x86 == 0x0F && c->x86_model >= 0x40) + return 1; - return 1; + if (c->x86 == 0x10) { + /* + * check OSVW bit for CPUs that are not affected + * by erratum #400 + */ + rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, val); + if (val >= 2) { + rdmsrl(MSR_AMD64_OSVW_STATUS, val); + if (!(val & BIT(1))) + goto no_c1e_idle; + } + return 1; + } + +no_c1e_idle: + return 0; } static cpumask_var_t c1e_mask; diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index a02e80c3c54b..06d98ae5a802 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -247,7 +247,7 @@ static void __cpuinit smp_callin(void) /* * Need to setup vector mappings before we enable interrupts. */ - __setup_vector_irq(smp_processor_id()); + setup_vector_irq(smp_processor_id()); /* * Get our bogomips. * diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 6e22454bfaa6..e31160216efb 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -122,8 +122,8 @@ setup_resource(struct acpi_resource *acpi_res, void *data) struct acpi_resource_address64 addr; acpi_status status; unsigned long flags; - struct resource *root; - u64 start, end; + struct resource *root, *conflict; + u64 start, end, max_len; status = resource_to_addr(acpi_res, &addr); if (!ACPI_SUCCESS(status)) @@ -140,6 +140,17 @@ setup_resource(struct acpi_resource *acpi_res, void *data) } else return AE_OK; + max_len = addr.maximum - addr.minimum + 1; + if (addr.address_length > max_len) { + dev_printk(KERN_DEBUG, &info->bridge->dev, + "host bridge window length %#llx doesn't fit in " + "%#llx-%#llx, trimming\n", + (unsigned long long) addr.address_length, + (unsigned long long) addr.minimum, + (unsigned long long) addr.maximum); + addr.address_length = max_len; + } + start = addr.minimum + addr.translation_offset; end = start + addr.address_length - 1; @@ -157,9 +168,12 @@ setup_resource(struct acpi_resource *acpi_res, void *data) return AE_OK; } - if (insert_resource(root, res)) { + conflict = insert_resource_conflict(root, res); + if (conflict) { dev_err(&info->bridge->dev, - "can't allocate host bridge window %pR\n", res); + "address space collision: host bridge window %pR " + "conflicts with %s %pR\n", + res, conflict->name, conflict); } else { pci_bus_add_resource(info->bus, res, 0); info->res_num++; diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index dece3eb9c906..46fd43f79103 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -127,9 +127,6 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) continue; if (!r->start || pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, - "can't reserve window %pR\n", - r); /* * Something is wrong with the region. * Invalidate the resource to prevent @@ -181,8 +178,6 @@ static void __init pcibios_allocate_resources(int pass) "BAR %d: reserving %pr (d=%d, p=%d)\n", idx, r, disabled, pass); if (pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, - "can't reserve %pR\n", r); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; |