diff options
Diffstat (limited to 'debian.ti-omap4/changelog')
-rw-r--r-- | debian.ti-omap4/changelog | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/debian.ti-omap4/changelog b/debian.ti-omap4/changelog index 3cb64aa72a2f..e93ee1a6c8b8 100644 --- a/debian.ti-omap4/changelog +++ b/debian.ti-omap4/changelog @@ -1,3 +1,156 @@ +linux-ti-omap4 (3.1.0-1282.2) oneiric; urgency=low + + [ Sebastien Jan ] + + * Config: enable cpufreq governors + * Config: enable ARM errata 754322 + * Config: uplevel with recent changes + + [ Upstream Kernel Changes ] + + * Revert "HACK: OMAP: DSS2: clk hack for OMAP2/3" + * Revert "OMAP: DSS2: HDMI: fix hdmi clock name" + * OMAP: hwmod: Fix the addr space, irq, dma count APIs + * OMAP4: ERRATA 742230 for OMAP4430 + * omap4430: fix core domain frequency + * omap4430: disable OPP50 support for core and iva + * omap4460: Fix core domain frequency + * omap4460: disable OPP50 for iva and core + * OMAP4: ERRATA 751472 for OMAP44XX + * OMAP: Revert DSS DRM patches + * OMAP: DSS2: Add picodlp panel driver + * OMAP: DSS2: PicoDLP: fix error handling in power_on + * OMAP: DSS2: check for manager when enabling display + * OMAP: DSS2: Don't allow moving managers away from enabled displays + * OMAP: DSS: dispc: enable/disable clocks in error handler + * OMAPFB: make debug message more useful + * OMAP: DSS2: DISPC: Prepare dispc_dump_regs() for shortening + * OMAP: DSS2: DISPC: Shorten dispc_dump_regs() + * OMAP: DSS2: DISPC: dispc_save_context() and dispc_restore_context() + cleanup + * OMAP: DSS2: DISPC: Shorten _dispc_set_color_conv_coef() + * OMAP: DSS2: Use a macro to declare size of the fifo_size array in + dispc.c + * OMAP: DSS2: remove unneeded fck enable/disables + * OMAP: DSS2: Change DSI device naming + * OMAP: DSS2: DSI: Improve dsi_mux_pads parameters + * OMAP: OMAPFB: make omapfb start even when a display is missing a driver + * OMAP: DSS2: fix clock sources on error and uninit + * OMAP: DSS2: Handle manager change in apply + * OMAP: DSS2: Remove "EXPERIMENTAL" from Kconfig + * OMAP: DSS2: Remove support for non-DISPC overlays + * OMAP: DSS2: DISPC: use lookup tables for bit shifts + * OMAP: DSS2: Add overlay caps to DSS features + * OMAP: DSS2: Add GLOBAL_ALPHA & PRE_MULT_ALPHA to ovl caps + * OMAP: DSS2: string parsing cleanups + * OMAP: OMAPFB: string parsing cleanups + * OMAP: DSS2: DISPC: remove non-existing func prototypes + * OMAP: DSS2: DISPC: rename overlay related funcs + * OMAP: DSS2: DISPC: rename manager related funcs + * OMAP: DSS2: reorganize functions in dss.h + * OMAP: DSS2: Support for Innolux AT070TN83 + * OMAP: DSS2: Use MIPI DSI enums from include/video/mipi_display.h + * OMAP: DSS2: DSI: Represent L4 and VP as sources of VC instead of modes + * OMAP: DSS2: Create enum for DSI operation modes + * OMAP: DSS2: DSI: Introduce generic write functions + * OMAP: DSS2: DSI: Remove functions dsi_vc_dcs_read_1() and + dsi_vc_dcs_read_2() + * OMAP: DSS2: DSI: Split dsi_vc_dcs_read() into 2 functions + * OMAP: DSS2: DSI: Introduce generic read functions + * OMAP: DSS2: Clean up stallmode and io pad mode selection + * OMAP: DSS2: Create an enum for DSI pixel formats + * OMAP: DSS2: DSI: Send zero length packet in dsi_vc_send_null() + * OMAP: DSS2: DSI Video mode support + * OMAP4: DSS2: HDMI: HDMI clean up to pass base_address + * OMAP4: DSS2: HDMI: Move pll and video configuration + * OMAP4: DSS2: HDMI: Use specific HDMI timings structure + * OMAP4: DSS2: HDMI: Move HDMI IP independent generic header + * OMAP4: DSS2: HDMI: Move the EDID definition from HDMI + * OMAP4: DSS2: HDMI: Split the current HDMI driver to move + * OMAP4: DSS2: HDMI: Move the HDMI IP dependent audio + * OMAP4: DSS2: HDMI: Rename the functions in HDMI IP library + * OMAP4: DSS2: HDMI: Function pointer approach to call + * OMAP4: DSS2: Rename hdmi_omap4_panel.c to hdmi_panel.c + * OMAP: DSS2: DISPC: Fix minimum PCD value + * OMAP: DSS2: HDMI: use default dividers + * OMAP: DSS2: HDMI: change regn definition + * OMAP: DSS2: DSI: Add comment about regn + * OMAP: DSS2: DISPC: Add missing IRQ definitions + * OMAP: DSS2: add dss_get_hdmi_venc_clk_source() + * OMAP: DSS2: DISPC: improve dispc_mgr_enable_digit_out() + * OMAP: DSS2: HDMI: improve hdmi output enable + * OMAP: DSS2: add read_edid() to omap_dss_driver struct + * OMAP: DSS2: add detect() to omap_dss_driver struct + * OMAP: DSS2: HDMI: make set_timing saner + * OMAP: DSS2: HDMI: implement read_edid() + * OMAP: DSS2: HDMI: remove edid parsing + * OMAP: DSS2: HDMI: split hdmi_core_ddc_edid + * OMAP: DSS2: HDMI: clean up edid reading & fix checksum + * OMAP: DSS2: HDMI: remove error prints in check_timings + * OMAP: DSS2: HDMI: implement detect() + * OMAP: DSS2: add panel-dvi driver + * OMAP: DSS2: panel-generic-dpi: remove "generic" panel + * OMAPFB: find best mode from edid + * OMAPDSS: DISPC: Reduce the number of arguments in dispc_ovl_setup() + * OMAPDSS: DISPC: Pass overlay params as arguments to dispc_ovl_setup() + * OMAPDSS: DISPC: Create helper function dispc_mgr_is_lcd() + * OMAPDSS: DISPC: Get correct pixel clock for TV manager + * OMAPDSS: DISPC: Remove hardcoded use of PPL in five tap clock + calculation + * OMAPDSS: DISPC: Clean up scaling related clock and five tap + calculations + * OMAPDSS: FEATURES: Create a range param to get max downscaling + * OMAPDSS: Taal: remove external backlight support + * OMAPDSS: Port 2430sdp display driver to DSS2 + * OMAPDSS: Port the H4 display driver to DSS2 + * OMAPDSS: Port the Apollon display driver to DSS2 + * OMAPDSS: Add N800 panel driver + * OMAPDSS: HDMI: Move the comments in avi infoframe + * OMAPDSS: HDMI: Replace hdmi_reg struct with u16 + * OMAPDSS: HDMI: Add missing register definitions + * OMAPDSS: HDMI: Add support to dump registers through debugfs + * OMAPDSS: remove vaddr from overlay info + * video/omap: fix build dependencies + * OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting + * OMAPDSS: DISPC: VIDEO3 pipeline support + * OMAPDSS: DISPC: zorder support for DSS overlays + * video: irq: Remove IRQF_DISABLED + * OMAPDSS: picodlp: add missing #include <linux/module.h> + * omap dss2 dont die on null driver for display + * After resume the HDMI/DVI output was still blank. It turns out that + * config omap2plus dss enable sdi dss omap4 + * omap dss unable to bring up hdmi nonfatal + * V4L2: OMAP: Make it work for OMAP4 + * OMAP DSS: allow discovery of default display + * OMAP: DSS: ensure default panel is enabled + * omap dss use correct codec name + * Add omap drm display driver + * drm/omap: make module unloading work + * drm/omap: add common scaled modes + * OMAP: DSS2: HDMI: use default dividers + * OMAP: DSS2: HDMI: change regn definition + * get_edid read_edid + * omap dss drm remove vaddr support + * omap dss drm partial_alpha_enabled + * omap dss make gfx fifo underflow nonfatal + * omap dss drm explain which connector did not initialize + * fix get_edid to read_edid + * fixes + * omapdrm remove get set update mode api + * add dssdev args + * dss correct return value for drm api + * dss hdmi msleep on detect + * remove enable display + * OMAP: DSS2: Add is_detected() driver API + * compile fixes generic dpi + * quench hdmi detect debug + * tps62361 default to nominal voltage + * [Blaze] Call smartreflex enable in the blaze board file + * arch/arm/mach-omap2/smartreflex.c: add missing error-handling code + * ARM: Panda: Add smartreflex call in panda board config + + -- Sebastien JAN <s-jan@ti.com> Mon, 14 Nov 2011 10:06:56 +0100 + linux-ti-omap4 (3.1.0-1282.1) oneiric; urgency=low -- Xavier Boudet <x-boudet@ti.com> Thu, 27 Oct 2011 13:29:33 +0100 |