summaryrefslogtreecommitdiff
path: root/drivers/ata/libata-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/libata-core.c')
-rw-r--r--drivers/ata/libata-core.c213
1 files changed, 37 insertions, 176 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ed11ee41673c..f210dbd4cbe6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -601,51 +601,7 @@ void ata_dev_disable(struct ata_device *dev)
}
/**
- * ata_pio_devchk - PATA device presence detection
- * @ap: ATA channel to examine
- * @device: Device to examine (starting at zero)
- *
- * This technique was originally described in
- * Hale Landis's ATADRVR (www.ata-atapi.com), and
- * later found its way into the ATA/ATAPI spec.
- *
- * Write a pattern to the ATA shadow registers,
- * and if a device is present, it will respond by
- * correctly storing and echoing back the
- * ATA shadow register contents.
- *
- * LOCKING:
- * caller.
- */
-
-static unsigned int ata_pio_devchk(struct ata_port *ap,
- unsigned int device)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 nsect, lbal;
-
- ap->ops->dev_select(ap, device);
-
- outb(0x55, ioaddr->nsect_addr);
- outb(0xaa, ioaddr->lbal_addr);
-
- outb(0xaa, ioaddr->nsect_addr);
- outb(0x55, ioaddr->lbal_addr);
-
- outb(0x55, ioaddr->nsect_addr);
- outb(0xaa, ioaddr->lbal_addr);
-
- nsect = inb(ioaddr->nsect_addr);
- lbal = inb(ioaddr->lbal_addr);
-
- if ((nsect == 0x55) && (lbal == 0xaa))
- return 1; /* we found a device */
-
- return 0; /* nothing found */
-}
-
-/**
- * ata_mmio_devchk - PATA device presence detection
+ * ata_devchk - PATA device presence detection
* @ap: ATA channel to examine
* @device: Device to examine (starting at zero)
*
@@ -662,25 +618,24 @@ static unsigned int ata_pio_devchk(struct ata_port *ap,
* caller.
*/
-static unsigned int ata_mmio_devchk(struct ata_port *ap,
- unsigned int device)
+static unsigned int ata_devchk(struct ata_port *ap, unsigned int device)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
u8 nsect, lbal;
ap->ops->dev_select(ap, device);
- writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
- writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
+ iowrite8(0x55, ioaddr->nsect_addr);
+ iowrite8(0xaa, ioaddr->lbal_addr);
- writeb(0xaa, (void __iomem *) ioaddr->nsect_addr);
- writeb(0x55, (void __iomem *) ioaddr->lbal_addr);
+ iowrite8(0xaa, ioaddr->nsect_addr);
+ iowrite8(0x55, ioaddr->lbal_addr);
- writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
- writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
+ iowrite8(0x55, ioaddr->nsect_addr);
+ iowrite8(0xaa, ioaddr->lbal_addr);
- nsect = readb((void __iomem *) ioaddr->nsect_addr);
- lbal = readb((void __iomem *) ioaddr->lbal_addr);
+ nsect = ioread8(ioaddr->nsect_addr);
+ lbal = ioread8(ioaddr->lbal_addr);
if ((nsect == 0x55) && (lbal == 0xaa))
return 1; /* we found a device */
@@ -689,27 +644,6 @@ static unsigned int ata_mmio_devchk(struct ata_port *ap,
}
/**
- * ata_devchk - PATA device presence detection
- * @ap: ATA channel to examine
- * @device: Device to examine (starting at zero)
- *
- * Dispatch ATA device presence detection, depending
- * on whether we are using PIO or MMIO to talk to the
- * ATA shadow registers.
- *
- * LOCKING:
- * caller.
- */
-
-static unsigned int ata_devchk(struct ata_port *ap,
- unsigned int device)
-{
- if (ap->flags & ATA_FLAG_MMIO)
- return ata_mmio_devchk(ap, device);
- return ata_pio_devchk(ap, device);
-}
-
-/**
* ata_dev_classify - determine device type based on ATA-spec signature
* @tf: ATA taskfile register set for device to be identified
*
@@ -926,11 +860,7 @@ void ata_std_dev_select (struct ata_port *ap, unsigned int device)
else
tmp = ATA_DEVICE_OBS | ATA_DEV1;
- if (ap->flags & ATA_FLAG_MMIO) {
- writeb(tmp, (void __iomem *) ap->ioaddr.device_addr);
- } else {
- outb(tmp, ap->ioaddr.device_addr);
- }
+ iowrite8(tmp, ap->ioaddr.device_addr);
ata_pause(ap); /* needed; also flushes, for mmio */
}
@@ -2616,13 +2546,8 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask)
u8 nsect, lbal;
ap->ops->dev_select(ap, 1);
- if (ap->flags & ATA_FLAG_MMIO) {
- nsect = readb((void __iomem *) ioaddr->nsect_addr);
- lbal = readb((void __iomem *) ioaddr->lbal_addr);
- } else {
- nsect = inb(ioaddr->nsect_addr);
- lbal = inb(ioaddr->lbal_addr);
- }
+ nsect = ioread8(ioaddr->nsect_addr);
+ lbal = ioread8(ioaddr->lbal_addr);
if ((nsect == 1) && (lbal == 1))
break;
if (time_after(jiffies, timeout)) {
@@ -2650,19 +2575,11 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
DPRINTK("ata%u: bus reset via SRST\n", ap->id);
/* software reset. causes dev0 to be selected */
- if (ap->flags & ATA_FLAG_MMIO) {
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- udelay(20); /* FIXME: flush */
- writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr);
- udelay(20); /* FIXME: flush */
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- } else {
- outb(ap->ctl, ioaddr->ctl_addr);
- udelay(10);
- outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
- udelay(10);
- outb(ap->ctl, ioaddr->ctl_addr);
- }
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
+ udelay(20); /* FIXME: flush */
+ iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+ udelay(20); /* FIXME: flush */
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
/* spec mandates ">= 2ms" before checking status.
* We wait 150ms, because that was the magic delay used for
@@ -2763,10 +2680,7 @@ void ata_bus_reset(struct ata_port *ap)
if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
/* set up device control for ATA_FLAG_SATA_RESET */
- if (ap->flags & ATA_FLAG_MMIO)
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- else
- outb(ap->ctl, ioaddr->ctl_addr);
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
}
DPRINTK("EXIT\n");
@@ -3159,12 +3073,8 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
}
/* set up device control */
- if (ap->ioaddr.ctl_addr) {
- if (ap->flags & ATA_FLAG_MMIO)
- writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
- else
- outb(ap->ctl, ap->ioaddr.ctl_addr);
- }
+ if (ap->ioaddr.ctl_addr)
+ iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
DPRINTK("EXIT\n");
}
@@ -3880,53 +3790,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
}
/**
- * ata_mmio_data_xfer - Transfer data by MMIO
- * @adev: device for this I/O
- * @buf: data buffer
- * @buflen: buffer length
- * @write_data: read/write
- *
- * Transfer data from/to the device data register by MMIO.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
-{
- struct ata_port *ap = adev->ap;
- unsigned int i;
- unsigned int words = buflen >> 1;
- u16 *buf16 = (u16 *) buf;
- void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr;
-
- /* Transfer multiple of 2 bytes */
- if (write_data) {
- for (i = 0; i < words; i++)
- writew(le16_to_cpu(buf16[i]), mmio);
- } else {
- for (i = 0; i < words; i++)
- buf16[i] = cpu_to_le16(readw(mmio));
- }
-
- /* Transfer trailing 1 byte, if any. */
- if (unlikely(buflen & 0x01)) {
- u16 align_buf[1] = { 0 };
- unsigned char *trailing_buf = buf + buflen - 1;
-
- if (write_data) {
- memcpy(align_buf, trailing_buf, 1);
- writew(le16_to_cpu(align_buf[0]), mmio);
- } else {
- align_buf[0] = cpu_to_le16(readw(mmio));
- memcpy(trailing_buf, align_buf, 1);
- }
- }
-}
-
-/**
- * ata_pio_data_xfer - Transfer data by PIO
+ * ata_data_xfer - Transfer data by PIO
* @adev: device to target
* @buf: data buffer
* @buflen: buffer length
@@ -3937,18 +3801,17 @@ void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
* LOCKING:
* Inherited from caller.
*/
-
-void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+void ata_data_xfer(struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->ap;
unsigned int words = buflen >> 1;
/* Transfer multiple of 2 bytes */
if (write_data)
- outsw(ap->ioaddr.data_addr, buf, words);
+ iowrite16_rep(ap->ioaddr.data_addr, buf, words);
else
- insw(ap->ioaddr.data_addr, buf, words);
+ ioread16_rep(ap->ioaddr.data_addr, buf, words);
/* Transfer trailing 1 byte, if any. */
if (unlikely(buflen & 0x01)) {
@@ -3957,16 +3820,16 @@ void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf,
if (write_data) {
memcpy(align_buf, trailing_buf, 1);
- outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr);
+ iowrite16(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr);
} else {
- align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr));
+ align_buf[0] = cpu_to_le16(ioread16(ap->ioaddr.data_addr));
memcpy(trailing_buf, align_buf, 1);
}
}
}
/**
- * ata_pio_data_xfer_noirq - Transfer data by PIO
+ * ata_data_xfer_noirq - Transfer data by PIO
* @adev: device to target
* @buf: data buffer
* @buflen: buffer length
@@ -3978,13 +3841,12 @@ void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf,
* LOCKING:
* Inherited from caller.
*/
-
-void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int write_data)
{
unsigned long flags;
local_irq_save(flags);
- ata_pio_data_xfer(adev, buf, buflen, write_data);
+ ata_data_xfer(adev, buf, buflen, write_data);
local_irq_restore(flags);
}
@@ -5770,7 +5632,7 @@ int ata_device_add(const struct ata_probe_ent *ent)
host->n_ports = ent->n_ports;
host->irq = ent->irq;
host->irq2 = ent->irq2;
- host->mmio_base = ent->mmio_base;
+ host->iomap = ent->iomap;
host->private_data = ent->private_data;
/* register each port bound to this device */
@@ -5808,8 +5670,8 @@ int ata_device_add(const struct ata_probe_ent *ent)
(ap->pio_mask << ATA_SHIFT_PIO);
/* print per-port info to dmesg */
- ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX "
- "ctl 0x%lX bmdma 0x%lX irq %d\n",
+ ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p "
+ "ctl 0x%p bmdma 0x%p irq %d\n",
ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
ata_mode_string(xfer_mode_mask),
ap->ioaddr.cmd_addr,
@@ -6328,9 +6190,8 @@ EXPORT_SYMBOL_GPL(ata_altstatus);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_interrupt);
-EXPORT_SYMBOL_GPL(ata_mmio_data_xfer);
-EXPORT_SYMBOL_GPL(ata_pio_data_xfer);
-EXPORT_SYMBOL_GPL(ata_pio_data_xfer_noirq);
+EXPORT_SYMBOL_GPL(ata_data_xfer);
+EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
EXPORT_SYMBOL_GPL(ata_qc_prep);
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);