summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_pdc202xx_old.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_pdc202xx_old.c')
-rw-r--r--drivers/ata/pata_pdc202xx_old.c423
1 files changed, 423 insertions, 0 deletions
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
new file mode 100644
index 000000000000..48f43432764e
--- /dev/null
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -0,0 +1,423 @@
+/*
+ * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * Alan Cox <alan@redhat.com>
+ *
+ * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
+ *
+ * First cut with LBA48/ATAPI
+ *
+ * TODO:
+ * Channel interlock/reset on both required ?
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_pdc202xx_old"
+#define DRV_VERSION "0.2.1"
+
+/**
+ * pdc2024x_pre_reset - probe begin
+ * @ap: ATA port
+ *
+ * Set up cable type and use generic probe init
+ */
+
+static int pdc2024x_pre_reset(struct ata_port *ap)
+{
+ ap->cbl = ATA_CBL_PATA40;
+ return ata_std_prereset(ap);
+}
+
+
+static void pdc2024x_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+
+static int pdc2026x_pre_reset(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u16 cis;
+
+ pci_read_config_word(pdev, 0x50, &cis);
+ if (cis & (1 << (10 + ap->port_no)))
+ ap->cbl = ATA_CBL_PATA80;
+ else
+ ap->cbl = ATA_CBL_PATA40;
+
+ return ata_std_prereset(ap);
+}
+
+static void pdc2026x_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * pdc_configure_piomode - set chip PIO timing
+ * @ap: ATA interface
+ * @adev: ATA device
+ * @pio: PIO mode
+ *
+ * Called to do the PIO mode setup. Our timing registers are shared
+ * so a configure_dmamode call will undo any work we do here and vice
+ * versa
+ */
+
+static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
+ static u16 pio_timing[5] = {
+ 0x0913, 0x050C , 0x0308, 0x0206, 0x0104
+ };
+ u8 r_ap, r_bp;
+
+ pci_read_config_byte(pdev, port, &r_ap);
+ pci_read_config_byte(pdev, port + 1, &r_bp);
+ r_ap &= ~0x3F; /* Preserve ERRDY_EN, SYNC_IN */
+ r_bp &= ~0x07;
+ r_ap |= (pio_timing[pio] >> 8);
+ r_bp |= (pio_timing[pio] & 0xFF);
+
+ if (ata_pio_need_iordy(adev))
+ r_ap |= 0x20; /* IORDY enable */
+ if (adev->class == ATA_DEV_ATA)
+ r_ap |= 0x10; /* FIFO enable */
+ pci_write_config_byte(pdev, port, r_ap);
+ pci_write_config_byte(pdev, port + 1, r_bp);
+}
+
+/**
+ * pdc_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the PIO mode setup. Our timing registers are shared
+ * but we want to set the PIO timing by default.
+ */
+
+static void pdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ pdc_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
+}
+
+/**
+ * pdc_configure_dmamode - set DMA mode in chip
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Load DMA cycle times into the chip ready for a DMA transfer
+ * to occur.
+ */
+
+static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
+ static u8 udma_timing[6][2] = {
+ { 0x60, 0x03 }, /* 33 Mhz Clock */
+ { 0x40, 0x02 },
+ { 0x20, 0x01 },
+ { 0x40, 0x02 }, /* 66 Mhz Clock */
+ { 0x20, 0x01 },
+ { 0x20, 0x01 }
+ };
+ u8 r_bp, r_cp;
+
+ pci_read_config_byte(pdev, port + 1, &r_bp);
+ pci_read_config_byte(pdev, port + 2, &r_cp);
+
+ r_bp &= ~0xF0;
+ r_cp &= ~0x0F;
+
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ int speed = adev->dma_mode - XFER_UDMA_0;
+ r_bp |= udma_timing[speed][0];
+ r_cp |= udma_timing[speed][1];
+
+ } else {
+ int speed = adev->dma_mode - XFER_MW_DMA_0;
+ r_bp |= 0x60;
+ r_cp |= (5 - speed);
+ }
+ pci_write_config_byte(pdev, port + 1, r_bp);
+ pci_write_config_byte(pdev, port + 2, r_cp);
+
+}
+
+/**
+ * pdc2026x_bmdma_start - DMA engine begin
+ * @qc: ATA command
+ *
+ * In UDMA3 or higher we have to clock switch for the duration of the
+ * DMA transfer sequence.
+ */
+
+static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct ata_taskfile *tf = &qc->tf;
+ int sel66 = ap->port_no ? 0x08: 0x02;
+
+ unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr;
+ unsigned long clock = master + 0x11;
+ unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);
+
+ u32 len;
+
+ /* Check we keep host level locking here */
+ if (adev->dma_mode >= XFER_UDMA_2)
+ outb(inb(clock) | sel66, clock);
+ else
+ outb(inb(clock) & ~sel66, clock);
+
+ /* The DMA clocks may have been trashed by a reset. FIXME: make conditional
+ and move to qc_issue ? */
+ pdc_set_dmamode(ap, qc->dev);
+
+ /* Cases the state machine will not complete correctly without help */
+ if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA)
+ {
+ if (tf->flags & ATA_TFLAG_LBA48)
+ len = qc->nsect * 512;
+ else
+ len = qc->nbytes;
+
+ if (tf->flags & ATA_TFLAG_WRITE)
+ len |= 0x06000000;
+ else
+ len |= 0x05000000;
+
+ outl(len, atapi_reg);
+ }
+
+ /* Activate DMA */
+ ata_bmdma_start(qc);
+}
+
+/**
+ * pdc2026x_bmdma_end - DMA engine stop
+ * @qc: ATA command
+ *
+ * After a DMA completes we need to put the clock back to 33MHz for
+ * PIO timings.
+ */
+
+static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct ata_taskfile *tf = &qc->tf;
+
+ int sel66 = ap->port_no ? 0x08: 0x02;
+ /* The clock bits are in the same register for both channels */
+ unsigned long master = ap->host->ports[0]->ioaddr.bmdma_addr;
+ unsigned long clock = master + 0x11;
+ unsigned long atapi_reg = master + 0x20 + (4 * ap->port_no);
+
+ /* Cases the state machine will not complete correctly */
+ if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) {
+ outl(0, atapi_reg);
+ outb(inb(clock) & ~sel66, clock);
+ }
+ /* Check we keep host level locking here */
+ /* Flip back to 33Mhz for PIO */
+ if (adev->dma_mode >= XFER_UDMA_2)
+ outb(inb(clock) & ~sel66, clock);
+
+ ata_bmdma_stop(qc);
+}
+
+/**
+ * pdc2026x_dev_config - device setup hook
+ * @ap: ATA port
+ * @adev: newly found device
+ *
+ * Perform chip specific early setup. We need to lock the transfer
+ * sizes to 8bit to avoid making the state engine on the 2026x cards
+ * barf.
+ */
+
+static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev)
+{
+ adev->max_sectors = 256;
+}
+
+static struct scsi_host_template pdc_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations pdc2024x_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = pdc_set_piomode,
+ .set_dmamode = pdc_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = pdc2024x_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static struct ata_port_operations pdc2026x_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = pdc_set_piomode,
+ .set_dmamode = pdc_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+ .dev_config = pdc2026x_dev_config,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = pdc2026x_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = pdc2026x_bmdma_start,
+ .bmdma_stop = pdc2026x_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ static struct ata_port_info info[3] = {
+ {
+ .sht = &pdc_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA2,
+ .port_ops = &pdc2024x_port_ops
+ },
+ {
+ .sht = &pdc_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA4,
+ .port_ops = &pdc2026x_port_ops
+ },
+ {
+ .sht = &pdc_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &pdc2026x_port_ops
+ }
+
+ };
+ static struct ata_port_info *port_info[2];
+
+ port_info[0] = port_info[1] = &info[id->driver_data];
+
+ if (dev->device == PCI_DEVICE_ID_PROMISE_20265) {
+ struct pci_dev *bridge = dev->bus->self;
+ /* Don't grab anything behind a Promise I2O RAID */
+ if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
+ if( bridge->device == PCI_DEVICE_ID_INTEL_I960)
+ return -ENODEV;
+ if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
+ return -ENODEV;
+ }
+ }
+ return ata_pci_init_one(dev, port_info, 2);
+}
+
+static struct pci_device_id pdc[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0},
+ { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1},
+ { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1},
+ { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2},
+ { PCI_DEVICE(PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2},
+ { 0, },
+};
+
+static struct pci_driver pdc_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pdc,
+ .probe = pdc_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init pdc_init(void)
+{
+ return pci_register_driver(&pdc_pci_driver);
+}
+
+
+static void __exit pdc_exit(void)
+{
+ pci_unregister_driver(&pdc_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pdc);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(pdc_init);
+module_exit(pdc_exit);