summaryrefslogtreecommitdiff
path: root/drivers/ata/sata_vsc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/sata_vsc.c')
-rw-r--r--drivers/ata/sata_vsc.c482
1 files changed, 482 insertions, 0 deletions
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
new file mode 100644
index 000000000000..d0d92f33de54
--- /dev/null
+++ b/drivers/ata/sata_vsc.c
@@ -0,0 +1,482 @@
+/*
+ * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
+ *
+ * Maintained by: Jeremy Higdon @ SGI
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2004 SGI
+ *
+ * Bits from Jeff Garzik, Copyright RedHat, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Vitesse hardware documentation presumably available under NDA.
+ * Intel 31244 (same hardware interface) documentation presumably
+ * available from http://developer.intel.com/
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "sata_vsc"
+#define DRV_VERSION "2.0"
+
+enum {
+ /* Interrupt register offsets (from chip base address) */
+ VSC_SATA_INT_STAT_OFFSET = 0x00,
+ VSC_SATA_INT_MASK_OFFSET = 0x04,
+
+ /* Taskfile registers offsets */
+ VSC_SATA_TF_CMD_OFFSET = 0x00,
+ VSC_SATA_TF_DATA_OFFSET = 0x00,
+ VSC_SATA_TF_ERROR_OFFSET = 0x04,
+ VSC_SATA_TF_FEATURE_OFFSET = 0x06,
+ VSC_SATA_TF_NSECT_OFFSET = 0x08,
+ VSC_SATA_TF_LBAL_OFFSET = 0x0c,
+ VSC_SATA_TF_LBAM_OFFSET = 0x10,
+ VSC_SATA_TF_LBAH_OFFSET = 0x14,
+ VSC_SATA_TF_DEVICE_OFFSET = 0x18,
+ VSC_SATA_TF_STATUS_OFFSET = 0x1c,
+ VSC_SATA_TF_COMMAND_OFFSET = 0x1d,
+ VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28,
+ VSC_SATA_TF_CTL_OFFSET = 0x29,
+
+ /* DMA base */
+ VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64,
+ VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C,
+ VSC_SATA_DMA_CMD_OFFSET = 0x70,
+
+ /* SCRs base */
+ VSC_SATA_SCR_STATUS_OFFSET = 0x100,
+ VSC_SATA_SCR_ERROR_OFFSET = 0x104,
+ VSC_SATA_SCR_CONTROL_OFFSET = 0x108,
+
+ /* Port stride */
+ VSC_SATA_PORT_OFFSET = 0x200,
+
+ /* Error interrupt status bit offsets */
+ VSC_SATA_INT_ERROR_CRC = 0x40,
+ VSC_SATA_INT_ERROR_T = 0x20,
+ VSC_SATA_INT_ERROR_P = 0x10,
+ VSC_SATA_INT_ERROR_R = 0x8,
+ VSC_SATA_INT_ERROR_E = 0x4,
+ VSC_SATA_INT_ERROR_M = 0x2,
+ VSC_SATA_INT_PHY_CHANGE = 0x1,
+ VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \
+ VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \
+ VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \
+ VSC_SATA_INT_PHY_CHANGE),
+};
+
+
+#define is_vsc_sata_int_err(port_idx, int_status) \
+ (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx)))
+
+
+static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
+{
+ if (sc_reg > SCR_CONTROL)
+ return 0xffffffffU;
+ return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+
+static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
+ u32 val)
+{
+ if (sc_reg > SCR_CONTROL)
+ return;
+ writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+
+static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
+{
+ void __iomem *mask_addr;
+ u8 mask;
+
+ mask_addr = ap->host->mmio_base +
+ VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+ mask = readb(mask_addr);
+ if (ctl & ATA_NIEN)
+ mask |= 0x80;
+ else
+ mask &= 0x7F;
+ writeb(mask, mask_addr);
+}
+
+
+static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ /*
+ * The only thing the ctl register is used for is SRST.
+ * That is not enabled or disabled via tf_load.
+ * However, if ATA_NIEN is changed, then we need to change the interrupt register.
+ */
+ if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
+ ap->last_ctl = tf->ctl;
+ vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
+ }
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
+ writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
+ writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
+ writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
+ writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
+ } else if (is_addr) {
+ writew(tf->feature, ioaddr->feature_addr);
+ writew(tf->nsect, ioaddr->nsect_addr);
+ writew(tf->lbal, ioaddr->lbal_addr);
+ writew(tf->lbam, ioaddr->lbam_addr);
+ writew(tf->lbah, ioaddr->lbah_addr);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE)
+ writeb(tf->device, ioaddr->device_addr);
+
+ ata_wait_idle(ap);
+}
+
+
+static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ u16 nsect, lbal, lbam, lbah, feature;
+
+ tf->command = ata_check_status(ap);
+ tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ tf->hob_feature = feature >> 8;
+ tf->hob_nsect = nsect >> 8;
+ tf->hob_lbal = lbal >> 8;
+ tf->hob_lbam = lbam >> 8;
+ tf->hob_lbah = lbah >> 8;
+ }
+}
+
+
+/*
+ * vsc_sata_interrupt
+ *
+ * Read the interrupt register and process for the devices that have them pending.
+ */
+static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
+ struct pt_regs *regs)
+{
+ struct ata_host *host = dev_instance;
+ unsigned int i;
+ unsigned int handled = 0;
+ u32 int_status;
+
+ spin_lock(&host->lock);
+
+ int_status = readl(host->mmio_base + VSC_SATA_INT_STAT_OFFSET);
+
+ for (i = 0; i < host->n_ports; i++) {
+ if (int_status & ((u32) 0xFF << (8 * i))) {
+ struct ata_port *ap;
+
+ ap = host->ports[i];
+
+ if (is_vsc_sata_int_err(i, int_status)) {
+ u32 err_status;
+ printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
+ err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0;
+ vsc_sata_scr_write(ap, SCR_ERROR, err_status);
+ handled++;
+ }
+
+ if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
+ handled += ata_host_intr(ap, qc);
+ else if (is_vsc_sata_int_err(i, int_status)) {
+ /*
+ * On some chips (i.e. Intel 31244), an error
+ * interrupt will sneak in at initialization
+ * time (phy state changes). Clearing the SCR
+ * error register is not required, but it prevents
+ * the phy state change interrupts from recurring
+ * later.
+ */
+ u32 err_status;
+ err_status = vsc_sata_scr_read(ap, SCR_ERROR);
+ printk(KERN_DEBUG "%s: clearing interrupt, "
+ "status %x; sata err status %x\n",
+ __FUNCTION__,
+ int_status, err_status);
+ vsc_sata_scr_write(ap, SCR_ERROR, err_status);
+ /* Clear interrupt status */
+ ata_chk_status(ap);
+ handled++;
+ }
+ }
+ }
+ }
+
+ spin_unlock(&host->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+
+static struct scsi_host_template vsc_sata_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+};
+
+
+static const struct ata_port_operations vsc_sata_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = vsc_sata_tf_load,
+ .tf_read = vsc_sata_tf_read,
+ .exec_command = ata_exec_command,
+ .check_status = ata_check_status,
+ .dev_select = ata_std_dev_select,
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_mmio_data_xfer,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .irq_handler = vsc_sata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .scr_read = vsc_sata_scr_read,
+ .scr_write = vsc_sata_scr_write,
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_pci_host_stop,
+};
+
+static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
+{
+ port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET;
+ port->data_addr = base + VSC_SATA_TF_DATA_OFFSET;
+ port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET;
+ port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET;
+ port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET;
+ port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET;
+ port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET;
+ port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET;
+ port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET;
+ port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET;
+ port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET;
+ port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
+ port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET;
+ port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET;
+ port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET;
+ writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
+ writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
+}
+
+
+static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct ata_probe_ent *probe_ent = NULL;
+ unsigned long base;
+ int pci_dev_busy = 0;
+ void __iomem *mmio_base;
+ int rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /*
+ * Check if we have needed resource mapped.
+ */
+ if (pci_resource_len(pdev, 0) == 0) {
+ rc = -ENODEV;
+ goto err_out;
+ }
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc) {
+ pci_dev_busy = 1;
+ goto err_out;
+ }
+
+ /*
+ * Use 32 bit DMA mask, because 64 bit address support is poor.
+ */
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc)
+ goto err_out_regions;
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc)
+ goto err_out_regions;
+
+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (probe_ent == NULL) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+ memset(probe_ent, 0, sizeof(*probe_ent));
+ probe_ent->dev = pci_dev_to_dev(pdev);
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ mmio_base = pci_iomap(pdev, 0, 0);
+ if (mmio_base == NULL) {
+ rc = -ENOMEM;
+ goto err_out_free_ent;
+ }
+ base = (unsigned long) mmio_base;
+
+ /*
+ * Due to a bug in the chip, the default cache line size can't be used
+ */
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
+
+ probe_ent->sht = &vsc_sata_sht;
+ probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO;
+ probe_ent->port_ops = &vsc_sata_ops;
+ probe_ent->n_ports = 4;
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = IRQF_SHARED;
+ probe_ent->mmio_base = mmio_base;
+
+ /* We don't care much about the PIO/UDMA masks, but the core won't like us
+ * if we don't fill these
+ */
+ probe_ent->pio_mask = 0x1f;
+ probe_ent->mwdma_mask = 0x07;
+ probe_ent->udma_mask = 0x7f;
+
+ /* We have 4 ports per PCI function */
+ vsc_sata_setup_port(&probe_ent->port[0], base + 1 * VSC_SATA_PORT_OFFSET);
+ vsc_sata_setup_port(&probe_ent->port[1], base + 2 * VSC_SATA_PORT_OFFSET);
+ vsc_sata_setup_port(&probe_ent->port[2], base + 3 * VSC_SATA_PORT_OFFSET);
+ vsc_sata_setup_port(&probe_ent->port[3], base + 4 * VSC_SATA_PORT_OFFSET);
+
+ pci_set_master(pdev);
+
+ /*
+ * Config offset 0x98 is "Extended Control and Status Register 0"
+ * Default value is (1 << 28). All bits except bit 28 are reserved in
+ * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity.
+ * If bit 28 is clear, each port has its own LED.
+ */
+ pci_write_config_dword(pdev, 0x98, 0);
+
+ /* FIXME: check ata_device_add return value */
+ ata_device_add(probe_ent);
+ kfree(probe_ent);
+
+ return 0;
+
+err_out_free_ent:
+ kfree(probe_ent);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out:
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
+ return rc;
+}
+
+
+static const struct pci_device_id vsc_sata_pci_tbl[] = {
+ { PCI_VENDOR_ID_VITESSE, 0x7174,
+ PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
+ { PCI_VENDOR_ID_INTEL, 0x3200,
+ PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
+ { } /* terminate list */
+};
+
+
+static struct pci_driver vsc_sata_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = vsc_sata_pci_tbl,
+ .probe = vsc_sata_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+
+static int __init vsc_sata_init(void)
+{
+ return pci_register_driver(&vsc_sata_pci_driver);
+}
+
+
+static void __exit vsc_sata_exit(void)
+{
+ pci_unregister_driver(&vsc_sata_pci_driver);
+}
+
+
+MODULE_AUTHOR("Jeremy Higdon");
+MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(vsc_sata_init);
+module_exit(vsc_sata_exit);